Datasets:

Modalities:
Text
Formats:
json
Languages:
English
ArXiv:
Libraries:
Datasets
pandas
License:
id
stringlengths
1
32
category
stringclasses
1 value
context
stringlengths
136
3.32k
question
stringlengths
14
239
answers
sequence
references
stringclasses
76 values
1072822
Irrigation
New legislation was enacted in Michigan to improve the management of the Great Lakes basin water resources to conform to the goals of the Great Lakes Compact and following agreements. The eight States and two Canadian Provinces that surround the Great Lakes have worked for over a decade to improve the management of water resources in the Great Lakes basin. Now that the Great Lakes Compact has become federal law (in October, 2008), proposed water diversions from the Great Lakes can be legally denied.
What does the Great Lake Compact do?
{ "text": [ "proposed water diversions from the Great Lakes can be legally denied" ], "answer_start": [ 435 ] }
Kelley, L. (2009c). Irrigation Fact Sheet #9 - Michigan Large Volume Water Use Requirements. https://www.canr.msu.edu/uploads/235/67987/lyndon/9largewaterwith.pdf
1054713
Irrigation
If a producer has a site that exceeds the 70 gal/min threshold capacity, then they are responsible for collecting monthly water use data to file the annual water use reporting forms from 2004 and after. Reports are due April 1st from the previous year. Paper copies of water use reporting forms (when available from the State) will be available from most MSU Extension and USDA Farm Service Centers.
Where can paper copies of water use reporting forms be found?
{ "text": [ "from most MSU Extension" ], "answer_start": [ 345 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #8 - How to Get More from your Irrigation System. https://www.canr.msu.edu/uploads/235/67987/lyndon/HGMIrrSys.pdf
1075908
Irrigation
Annual operating costs will include an estimate of energy cost and labor attributable to the average operation of the equipment. For calculation purposes an annual use of six 1 inch applications of irrigation was used. A greater number of small applications will favor systems that have low labor costs, where a smaller number of large applications would favor systems with high labor and low investment attributes. Systems with low energy cost primarily from low pumping cost are favored by higher total annual use where low initial cost often compensate for higher energy cost if a low total volume of water is applied annually.
What kind of applications favor a system with low investment attributes?
{ "text": [ "a smaller number of large applications" ], "answer_start": [ 310 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1056947
Irrigation
Irrigation Fact Sheet # 2: Instantaneous Rates. The soils infiltration rate is the rate water can enter the soils surface. Michigan soils have infiltration rates from a high of 1 inch/2 hour to, as little as 20 minutes per inch. Heavier soils such as clay and clay loam will take water in at a slower rate than sands and sandy loams. Estimates for water infiltration rates into soil types, may be found in the "physical and chemical properties of soils" section of the soil survey for your county.
What is the maximum soil infiltration rate in Michigan?
{ "text": [ " 1 inch/2 hour" ], "answer_start": [ 176 ] }
Kelley, L. (2007a). Irrigation Fact Sheet # 2 - Irrigation Application Instantaneous Rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/2_IrrigationApplicationRates1.30.pdf
1072016
Irrigation
Instructions for completing the Evaluating Potential Irrigation Runoff Form. (2) Select a radial transect line (for center pivots) or a transect line representing the watering pattern (for solid set or traveler systems) through the identified lowest infiltration/highest runoff potential area of the field identified above.
When should I select a radial transect line?
{ "text": [ "for center pivot" ], "answer_start": [ 112 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1062714
Irrigation
(12) Check irrigation tires: Check air pressure in each pivot tire. Refill to 20 pounds or the recommended level. Note tires that were near flat, and return a week later to see if they leaked. Expect tires to lose two or three pounds pressure each year if not re-aired annually.
What is the first step in inspecting your irrigation tires?
{ "text": [ "Check air pressure in each pivot tire" ], "answer_start": [ 29 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1062489
Irrigation
(16) Chemigation valve and fertigation pump power supply: Many producers are investigating chemigation/fertigation as an option. Adding the equipment now makes it a far more viable option in the future. Make sure there is a functional chemigation valve on each water supply feeding into the system. Install interlocked injection pump power source. This will operate only when the irrigation water pump in on avoiding undiluted fertilizer from ever going into the irrigation system. For a diesel engine this may be as simple as running the injection pump from a v-belt off of the engine shaft.
When is the only time when the interlocked injection pump is supposed to operate?
{ "text": [ "when the irrigation water pump in" ], "answer_start": [ 371 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1123903
Irrigation
The key to knowing the correct setting for the chemigation pump is to determine how many acres per hour the pivot will cover at the desired irrigation application depth or rate. Chemigation injection pumps are calibrated in gallons per hour (gph). So, if you know how much product you want to apply per acre -e.g., 10 gallons/acre - and how many acres the pivot will irrigate per hour - e.g., five acres/hour - then you will know how many gallons per hour the pump will need to deliver.
What is the key to knowing the correct setting for the chemigation pump?
{ "text": [ "determine how many acres per hour the pivot will cover at the desired irrigation application depth or rate" ], "answer_start": [ 70 ] }
Melvin, S. (2023a). How to Determine the Chemigation Injection Pump Setting for a Center Pivot with the End Gun Off and On. UNL CropWatch. https://cropwatch.unl.edu/2023/how-determine-chemigation-injection-pump-setting-center-pivot-end-gun-and
1041062
Irrigation
Question: What are the disadvantages of irrigation? Excerpt: There are potential side effects also linked with irrigation such as: Water logging in the farms, Increase or decrease in pH levels of the soil, Poor aeration to the soil because of too much moisture, Polluted water can pollute the underground resources, Irrigation in cooler regions of the country can cause disease outbreaks due to stagnant water, Fertilizers can sometimes get into the source of water and cause eutrophication, If the water in the reservoir dries up due to evaporation, then it could result in a dry land. Using the river water entirely for irrigation can disturb the local ecology
What causes the pollution of underground resources?
{ "text": [ " Polluted water" ], "answer_start": [ 261 ] }
AgriFarming. (2023). Frequently Asked Questions about Irrigation (FAQs) | Agri Farming. https://www.agrifarming.in/frequently-asked-questions-about-irrigation-faqs
1069267
Irrigation
Permanent improvements. The annual cost of permanent improvements made by lessee should be viewed as additional income above lease rate by landowners. Wells are always the property of the landowner of the land they are constructed on but many of the other items associated with the irrigation system may be recoverable or moved by the lessee at the end of the agreement. For this reason it is important to list the land improvements in their entirety and include the handling of the item at the termination of the agreement. If the improvement left by the lessee are all but the pivot or distribution system the landowner has a clean separation at the end of the agreement period if needed, with less potential problem locating another lessee to irrigate the farm allowing the landowner to recoup the investment in land improvements.
When does the landowner have a clean separation at the end of the agreement period?
{ "text": [ "If the improvement left by the lessee are all but the pivot or distribution system " ], "answer_start": [ 525 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #6 - Irrigation Aspects of Land Lease Agreements. https://www.canr.msu.edu/uploads/235/67987/lyndon/LandRent.pdf
1062447
Irrigation
A simple, inexpensive catch can stand can be built using: 1. 32 oz. disposable soda cup (Taco Bell cup) 2. 3 inch plastic drain pipe cut to 5 inch in length 3. 2 x 3 inch stud, cut to length to wedge into plastic drain pipe (drill hole partially through the chunk of wood to accommodate the fence post) 4. Steel (step-in) electric fence post
How should you cut the studs used in building the catch can stand?
{ "text": [ "cut to length to wedge into plastic drain pipe" ], "answer_start": [ 177 ] }
Kelley, L. (2020). Irrigation Fact Sheet #16 - Catch Can Stands for Rain Gauges and Uniformity Check for Evaluating Irrigation.
1068742
Irrigation
Permanent improvements: The addition of irrigation to farmland often requires investment in permanent improvements to the land. The landowner may make these improvements upfront and recoup their investment over time in higher land rent charges. If landowners are not willing to pay for the permanent improvements to the land needed for irrigation, the lessee may advance the cost of the permanent improvements and recover his investment over the period of the contract in the form of a small increase in land rent values. Many lease agreements for irrigated land provide no upfront cost to the landowner but transfer value of permanent improvement paid by the lessee to the landlord over the period of 5 to 10 years. Shorter time frames provide a higher value return to landowner.
How do lease agreements take into account the lessee's responsibility for improvements to land to be irrigated?
{ "text": [ "transfer value of permanent improvement paid by the lessee to the landlord over the period of 5 to 10 years" ], "answer_start": [ 608 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1119464
Irrigation
Drought symptoms in corn: Corn leaf rolling is the primary symptom of drought. Greying of leaf tissue will occur under extremely severe conditions. The earlier leaf rolling occurs in the day or the longer the duration of leaf rolling the greater the stress the crop is under. Yield loss estimates are assumed when drought stress occurs for four consecutive days or more.
What does corn leaf rolling mean?
{ "text": [ "the primary symptom of drought" ], "answer_start": [ 47 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1011610
Irrigation
Question: What are the important parameters I should look at in an irrigation water quality report? Excerpt: Most irrigation water analysis reports will provide a list of cations (calcium, magnesium, sodium and potassium) and anions (bicarbonate, carbonate, sulfate and chloride) along with pH, total dissolved solids (TDS), electrical conductivity (EC) and the sodium adsorption ratio (SAR). The cations, anions and TDS will be listed as milligrams per liter (mg/l) or the equivalent, parts per million (ppm). The two most important factors are TDS or EC and SAR. The TDS of a water sample is a measure of the concentration of soluble salts in the water, which include all the cations and anions. TDS is estimated from the EC of the water. The more dissolved minerals in the water, the higher the EC. The units of EC can be listed as millimhos per centimeter (mmhos/cm), micromhos per centimeter (umhos/cm) or deciSiemens per meter (dS/m). One millimho per centimeter is equal to 1000 micromhos per centimeter or 1 dS/m. TDS can be estimated by multiplying the EC (in umhos/cm) by 0.64. For example, the TDS of a water sample with an EC of 2000 umhos/cm (2.0 dS/m) would be about 1280 mg/l. The SAR of a water sample is the proportion of sodium to calcium and magnesium in the water. Since it is a ratio, SAR has no units. For most soils in North Dakota, any water with an EC greater than 2000 micromhos per centimeter (2 mmhos/cm or 2 dS/m) or an SAR value greater than 6 is not generally recommended for continuous irrigation. However, soils with a high sand content can use water with an SAR up to 9.
What are the units associated with EC?
{ "text": [ " millimhos per centimeter (mmhos/cm)" ], "answer_start": [ 834 ] }
Fipps, G. (2021). Irrigation Water Quality Standards And Salinity Management Strategies. https://irrigation.tamu.edu/files/2021/04/EB-1667.pdf
1062468
Irrigation
(17) Stop barricades: Pivots that make partial circles often use stop barricades at the edge of the water area. Check stops for integrity, making sure that the height is still appropriate for the machine s turnoff mechanism. Manually operate the turn off arms on the pivot to make sure that they are functioning. Newer style stop barricades are designed to catch and spin the tire against the barricade allowing the safety system to shut the pivot down as a backup safety system.
What is the goal of the safety system provided by the newer stop barricades?
{ "text": [ "to shut the pivot down" ], "answer_start": [ 430 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1073246
Irrigation
An overview of procedure to establish new large volume withdrawals: (d) If the MiWWAT assessment is orange (zone c) or red (zone d) try to modify location or well depth to reduce stream flow impact. If more favorable assessment can not be achieved a Site Specific Review may be requested from Michigan Department of Environmental Quality through the MiWWAT tool. (e) If the MDEQ Site Specific Review does not provide a favorable registration to proceed, land owner may initiate a meeting of the Large Volume Water Users in the watershed to investigate reduction in water use by fellow large volume water users. (f) If the meeting of Large Volume Water Users does not provide MDEQ with sufficient reductions in use by other riparian to allow the proposed water use civil court action may be necessary to establish the riparian right to water use for the parcel.
How can I request a Site Specific Review from Michigan Department of Environmental Quality?
{ "text": [ "through the MiWWAT tool" ], "answer_start": [ 338 ] }
Kelley, L. (2009c). Irrigation Fact Sheet #9 - Michigan Large Volume Water Use Requirements. https://www.canr.msu.edu/uploads/235/67987/lyndon/9largewaterwith.pdf
1094695
Irrigation
The infiltration rate is the rate water can enter the soil surface. Michigan soils have infiltration rates from a high of 1 inch/2 hour to, as little as 20 minutes per inch. Heavier soils such as clay and clay loam will take water in at a slower rate than sands and sandy loams. Tillage method and surface compaction since a tillage operation affects infiltration rate. Conservation tillage and no-till result in the highest infiltration rate while disc and moldboard tillage result in the lowest rates, particularly after several wetting events. Estimates for water infiltration rates are included in the "physical and chemical properties of soils" section of the soil survey for your county.
What kind of soils have a faster infiltration rate?
{ "text": [ "sandy loams" ], "answer_start": [ 266 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1095077
Irrigation
At times of peak water use, the application volume could be as large as 1.5 inches for four to five days of water use. It is all about efficiency. The plant most effectively uses water is through transpiration. Water that is lost from evaporation at the soil surface or on the leaves is less beneficial to the plant, providing only a temporarily cooler environment. Small application may help in evaporative cooling during pollination or other crucial times, but reduces the amount of water that actually gets to the roots compared to fewer large applications totaling the same amount.
What can help in evaporative cooling during pollination or other crucial times?
{ "text": [ "Small application" ], "answer_start": [ 366 ] }
Kelley, L. (2014c). Irrigation Fact Sheet #14 - Irrigation Application Volumes. https://www.canr.msu.edu/uploads/235/67987/FactSheets/14_IrrigationApplication.pdf
1057696
Irrigation
Evapotransporation rate (E.T.) is a term that represents the daily water lost by the plants maintenance and growth along with the evaporative loss from the soil surface. E.T. rates for almost all crops grown in northern Indiana and Michigan have rates under 0.25 inches per day for all but a few extreme days.
What is the expected daily application rate to irrigate most crops in Indiana and Michigan?
{ "text": [ "0.25 inches per day" ], "answer_start": [ 258 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1071866
Irrigation
Infiltration rate decreases with increased wetting time. Therefore, the amount of water applied during each application affects the fraction of water that enters the soil and the fraction of runoff. Small pockets and depressions in the soil surface hold a volume of water at that location until the soil surface receives the water. Midseason cultivation or in-row soil surface modification (i.e. dammer/diker) increases the surface storage.
What is the relationship between infiltration rate and wetting time?
{ "text": [ "Infiltration rate decreases with increased wetting time" ], "answer_start": [ 0 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1121875
Irrigation
Table 1. Example corn yield loss estimates when stress occurs for four or more consecutive days. Adapted from Classen and Shaw, 1970; Rhoads and Bennet, 1990; and Shaw, 1988. The Corn Development stage known as early vegetative (VE - V12) has an estimated Yield Loss per Day of Stress of 1-3. The Corn Development stage known as Late vegetative (V12 to VT) has an Estimated Yield Loss per Day of Stress of 2-5. The Corn Development stage known as Pollination to Blister (R2) has an Estimated Yield Loss per Day of Stress of 3-9. The Corn Development stage known as Milk (R3) has an Estimated Yield Loss per Day of Stress of 3-6. The Corn Development stage known as Dough (R4) has an Estimated Yield Loss per Day of Stress of 3-5. The Corn Development stage known as Dent (R5) has an Estimated Yield Loss per Day of Stress of 2-4. The Corn Development stage known as Maturity (R6) has an Estimated Yield Loss per Day of Stress of 0.
What is the short hand for the dent development stage of corn?
{ "text": [ "R5" ], "answer_start": [ 773 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1010173
Irrigation
Question: How do I turn the water off to my system in case of an emergency? Excerpt: Find your backflow assembly.''Above ground assemblies will be in a large, green/tan, rectangular box, more than likely located near your home or water meter.'Below ground assemblies will have a large, green, rectangular lid.' Once found, turn either handle on assembly to the right to turn water off.' green, rectangular lid.' Once found, turn either handle on assembly to the right to turn water off.'rs get the help they need quickly and easily.
What do below ground assemblies look like?
{ "text": [ "large, green, rectangular lid" ], "answer_start": [ 279 ] }
Carolina Irrigation. (2024). FAQ | Carolina Irrigation | Residential & Commercial Irrigation Experts Since 1999. https://www.carolinairrigation.net/faq
1121800
Irrigation
If pollination is good, manage the field as normal. If pollination is poor, those kernels will develop normally with reduced yield potential. These field may be considered for forage or silage harvest. If there is no pollination, there are two options; (1) harvest as near to pollination as possible for the highest quality forage possible or (2) leave the crop as a living cover crop until the fall before mowing or chopping. Continual leaf rolling of the plant in the weeks leading up to pollination can result in a yield loss of 1-5 percent per day. During pollen shed and silking severe stress can reduce yields by up to nine percent per day. In the weeks following pollination drought stress can reduce yield by up to six percent per day.
What is it called when reduced yield must occur due to poor pollination?
{ "text": [ "forage or silage harvest" ], "answer_start": [ 176 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1094694
Irrigation
The infiltration rate is the rate water can enter the soil surface. Michigan soils have infiltration rates from a high of 1 inch/2 hour to, as little as 20 minutes per inch. Heavier soils such as clay and clay loam will take water in at a slower rate than sands and sandy loams. Tillage method and surface compaction since a tillage operation affects infiltration rate. Conservation tillage and no-till result in the highest infiltration rate while disc and moldboard tillage result in the lowest rates, particularly after several wetting events. Estimates for water infiltration rates are included in the "physical and chemical properties of soils" section of the soil survey for your county.
What kind of soils have a faster infiltration rate?
{ "text": [ "sands" ], "answer_start": [ 256 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1079876
Irrigation
In extreme situations of average daily temperatures over 90 degrees, low relative humidity and wind, water use may reach 0.31 to 0.33 inches per day. Crops that cannot tolerate extremes may need an irrigation system designed to meet a requirement of one inch every 3 days (6.5 gallons/minute/acre of irrigation). Systems design capacity of greater than 6.5 gallons/minute/acre of irrigation are only needed in situations where crop management practice result in water application at rates faster than the soil infiltration rate resulting in water loss below the root zone or less than 100% effective water use.
What level of water use may be reached during extreme weather circumstances?
{ "text": [ "0.31 to 0.33 inches per day" ], "answer_start": [ 121 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1121841
Irrigation
Effects on soybean during grain fill Drought effects on soybean are generally not as severe as corn. This is a result of overlapping of development stages. When short-term drought stress results in flower or pod abortion, new flowers and pods will set when conditions improve. During prolonged drought stress, or when the stress occurs during pod set and seed filling stages, the compensatory ability is not as likely to occur. Drought can reduce pod number by up to 20 percent as a result of flower and pod abortion. Seeds per pod and seed size can also be affected by drought stress but to a lesser extent than the number of pods. Drought stress often results in earlier maturity or shortening of the grain filling period resulting in lower seed weights and yields. Soybean yield loss from drought stress is compounded by the lack of nitrogen mineralization and nitrogen fixation. In dry conditions, nodules cease nitrogen fixation because of a lack of soil moisture and lack of carbohydrate supply from the soybean plant. If water deficits are short lived, nodule nitrogen fixation can resume.
What happens when short-term drought stress results in flower or pod abortion?
{ "text": [ "new flowers and pods will set when conditions improve" ], "answer_start": [ 222 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1080738
Irrigation
(3) Surface water availability. Is surface water available in dependable large volumes? Surface water quantities need to be available at the time of maximum irrigation, often late July early August. This is the season the surface waters are near their lowest. Make sure to evaluate available flow the summer before you start irrigating. In most areas you may not delete stream flow to the extent that it negatively impacts neighbors or the environment. If not, consider part of the water of the States, drainage ditches flow, may be depleted. Remember there can be major contamination challenges impacting food safety in using surface water for vegetable irrigation and cooling.
When does maximum irrigation occur?
{ "text": [ "late July early August" ], "answer_start": [ 175 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08.22.pdf
1073006
Irrigation
Michigan's 2006 water use legislation limited large volume water use to prevent an adverse resource impacted would be expected. 2008 water use legislation added a limit of no greater than 25% of a watersheds index flow (defined as the median average August flow) could be used by large volume water users. Developments of a screening tool to estimate each watershed low summer stream flow and the potential impact by large volume water use was started in late 2006 with release late 2008. The screening tool estimates how much water can be used in each watershed in Michigan without causing a detrimental effect to characteristic fish populations in the watershed. Michigan's Water Withdrawal Assessment Tool is available for use online.
How can I use the Michigan Water Withdrawal Assessment tool?
{ "text": [ "online" ], "answer_start": [ 730 ] }
Kelley, L. (2009c). Irrigation Fact Sheet #9 - Michigan Large Volume Water Use Requirements. https://www.canr.msu.edu/uploads/235/67987/lyndon/9largewaterwith.pdf
1069270
Irrigation
Permanent improvements. The annual cost of permanent improvements made by lessee should be viewed as additional income above lease rate by landowners. Wells are always the property of the landowner of the land they are constructed on but many of the other items associated with the irrigation system may be recoverable or moved by the lessee at the end of the agreement. For this reason it is important to list the land improvements in their entirety and include the handling of the item at the termination of the agreement. If the improvement left by the lessee are all but the pivot or distribution system the landowner has a clean separation at the end of the agreement period if needed, with less potential problem locating another lessee to irrigate the farm allowing the landowner to recoup the investment in land improvements.
What happens if the improvements left by the lessee are all but the distribution system?
{ "text": [ "em the landowner has a clean separation at the end of the agreement period" ], "answer_start": [ 605 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #6 - Irrigation Aspects of Land Lease Agreements. https://www.canr.msu.edu/uploads/235/67987/lyndon/LandRent.pdf
1073011
Irrigation
Michigan large quantity water withdrawals fall into three categories depending on date of construction: (1) Existing on February 28, 2006 ' Subject to water use reporting. (2) February 28, 2006 through July 8, 2009. (3) On and after July 9, 2009
What is the second category that Michgian large quantity water withdrawals can fall into?
{ "text": [ "February 28, 2006 through July 8, 2009" ], "answer_start": [ 176 ] }
Kelley, L. (2009c). Irrigation Fact Sheet #9 - Michigan Large Volume Water Use Requirements. https://www.canr.msu.edu/uploads/235/67987/lyndon/9largewaterwith.pdf
1057670
Irrigation
Annual operating cost will include an estimate of energy cost and labor attributable to the average operation of the equipment. For calculation purposes an annual use of six one inch applications of irrigation was used. A greater number of small applications will favor systems that have low labor costs, where a smaller number of large applications would favor system with high labor and low investment attributes. Systems with low energy cost primarily from low pumping cost are favored by higher total annual use where low initial cost often compensate for higher energy cost if a low total volume of water is applied annually.
When do low initial costs compensate for high energy costs?
{ "text": [ "if a low total volume of water is applied annually." ], "answer_start": [ 579 ] }
Kelley, L., & Miller, S. (2019). Irrigation Fact Sheet #3 - Irrigation Scheduling Tools. https://www.canr.msu.edu/uploads/236/43605/FactSheets/3_IrrigationSchedulingTools5.14.pdf
1073019
Irrigation
(1a) Existing on February 28, 2006 ' Subject to water use reporting. These withdrawals from either wells or surface water are exempt from the new adverse resource impact standards. This is often termed as "Grandfathering", but these withdrawals may still be required to share the water resource with both other "grandfathered" users and with all new users since the legislation still hold Michigan's water use as a riparian right.
Who do "grandfathered" withdrawals need to share water sources with?
{ "text": [ "other \"grandfathered\" users and with all new users" ], "answer_start": [ 305 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1068381
Irrigation
A raise in rent values greater than just recovering the investment in the water well is justified since the well allows a greater net profit with lower risk then dry land farming. The additional profit above the cost of the addition of irrigation is often split between landlord and lessee.
What justifies there being a raise in rent values greater than just recovering the investment in the water well?
{ "text": [ "the well allows a greater net profit with lower risk then dry land farming" ], "answer_start": [ 104 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1046537
Irrigation
Assembly directions - Option 2: 0.5 inch plastic pipe cut in 4 inch section can be drilled with 0.25 inch hole 1 inch from end. 13 inches plastic cable tie secured through the 0.25 inch hole creates a cup holder to fit on top of post. The total cost per unit is less than one dollar and requires only a saw and a drill. The catch can stand will allow data collection in fields with crops up to 30 inches tall. A 500 ml graduated cylinder is used to measure water volume. 500 ml graduated cylinders are available from science lab and beer maker supply stores on the web.
For catch can stands, what type of cylinder is used to measure water volume?
{ "text": [ "500 ml graduated cylinder" ], "answer_start": [ 412 ] }
Kelley, L. (2020). Irrigation Fact Sheet #16 - Catch Can Stands for Rain Gauges and Uniformity Check for Evaluating Irrigation.
1094704
Irrigation
The infiltration rate is the rate water can enter the soil surface. Michigan soils have infiltration rates from a high of 1 inch/2 hour to, as little as 20 minutes per inch. Heavier soils such as clay and clay loam will take water in at a slower rate than sands and sandy loams. Tillage method and surface compaction since a tillage operation affects infiltration rate. Conservation tillage and no-till result in the highest infiltration rate while disc and moldboard tillage result in the lowest rates, particularly after several wetting events. Estimates for water infiltration rates are included in the "physical and chemical properties of soils" section of the soil survey for your county.
What kind of infiltration do disc and moldboard tillage result in?
{ "text": [ "lowest rates" ], "answer_start": [ 490 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1071988
Irrigation
The irrigation application rate will vary throughout the length of a center pivot irrigation system, with the highest instantaneous application rate at the end of the system furthest from the pivot point. Irrigation application rate will be uniform for solid set and large gun hose traveler irrigation systems as long as application time or forward travel of system is unchanged.
What kind of irrigation system provides uniform application rates throughout the entire system?
{ "text": [ "large gun hose traveler" ], "answer_start": [ 267 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1119452
Irrigation
Iowa soils hold 1.5-2.5 inches per foot of effective rooting depth. Root depth in Iowa has been found at depths greater than six feet. The importance of proper early root development cannot be underestimated. Crops with deep root systems explore a greater volume of soil are able to withstand drought conditions better.
How much effective rooting depth do Iowa soils hold?
{ "text": [ "1.5-2.5 inches per foot" ], "answer_start": [ 16 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1121826
Irrigation
Effects on vegetative soybean: Vegetative growth of soybean during drought is diminished. Drought stressed soybean are often shorter with smaller leaves due to a lack of water, nutrient availability, and nutrient uptake. Soybean root growth increases during drought conditions because plant carbohydrates are shifted to root growth. When adequate rainfall or soil moisture returns, vegetative growth will resume until the mid-seeding filling stage (R5.5). Under severe drought stress, soybean flowering may occur earlier than normal in an effort to produce seed before premature death.
What kind of soybeans are often shorter and have smaller leaves?
{ "text": [ "Drought stressed soybean" ], "answer_start": [ 90 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1011627
Irrigation
Question: Can all soils be irrigated? Excerpt:All soils can be irrigated but the right irrigation system has to be selected. For example, soils with a high clay content can be irrigated with a trickle (often called drip) irrigation system, a surface irrigation system (if the land has less than 2% slope) and a solid-set sprinkler system, however, a moving sprinkler system like center pivots and lateral moves may not work very well. Conversely, a soil with a high sand fraction on sloping land can be irrigated very well with a moving sprinkler system but not by a surface irrigation system and it may be difficult to use trickle irrigation and solid-set sprinklers due to elevation differences. Center pivots are used to apply water to over 88% of the irrigated land in North Dakota. Due to the preference for moving sprinkler systems, all the soils in the state have been classified as irrigable, conditional and non-irrigable. The irrigable and non-irrigable classifications are self-explanatory but a soil may be conditional for one or more of the following reasons: salinity accumulation concerns, too much slope, irrigation water quality, shallow bedrock, poor drainage characteristics and too much gravel. Successful irrigation also relies on the compatibility of the water quality with the soils in the field. In general, sandy well-drained soils can be irrigated using water with higher TDS and SAR than soils with more clay and silt content.
How must soils with a high clay content be irrigated?
{ "text": [ "with a trickle (often called drip) irrigation system" ], "answer_start": [ 186 ] }
NDSU Agriculture. (2024). Irrigation - Frequently Asked Questions. https://www.ndsu.edu/agriculture/ag-hub/ag-topics/crop-production/irrigation-tiling-drainage/irrigation-frequently-asked-questions
1057277
Irrigation
Increasing the amount of water that may enter the soil in a given period of time: The instantaneous irrigation application rate will vary throughout the length of a center pivot irrigation system, with the highest instantaneous application rates at the end of the system furthest from the pivot point. Instantaneous irrigation application rate will be uniform for solid set and large gun hose traveler irrigation systems as long as application time or forward travel of system is unchanged.
What can cause the instantaneous application rate to remain uniform?
{ "text": [ "as long as application time or forward travel of system is unchanged." ], "answer_start": [ 421 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1008559
Irrigation
Question: Is a pressure regulator necessary to use with a drip system? Excerpt: Yes, drip irrigation or low volume irrigation systems have been designed to operate with lower pressures than sprinkler systems, so pressure regulators typically are a necessity. Operating pressure suggested for a drip system is around 25 PSI with the lower pressure start at 15 PSI and the higher pressure is 30 PSI. Using a pressure regulator will help to ensure your drip system will operate optimally
What is the lower bound for suggested operating pressure for a drip system?
{ "text": [ "15 PSI " ], "answer_start": [ 356 ] }
DIG Corp. (2024). Drip Irrigation FAQ’s. https://www.digcorp.com/drip-irrigation-faqs/
1047666
Irrigation
Water use reporting history. Two water use laws went into effect in 2004 in Michigan (PA 177 and PA 148). State water use reports are required by many farm operations by PA 148. Complaints from small well owners against large well owners will be investigated by the state (PA 177). These public acts reflect changes to the Natural Resource and Environmental Protection Act (NREPA) and fall under the enforcement provisions contained therein.
What is required by the PA 148?
{ "text": [ "State water use reports are required" ], "answer_start": [ 106 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1071995
Irrigation
Existing irrigation system application rate compared to soil infiltration rate. Evaluation of the irrigation application rate compared to soil infiltration rate on existing irrigation systems can be done by observation, taking into account all factors that affect the situation.
What can taking into account all factors that affect the situation do for me when it comes to irrigation application rate and soil infiltration rates?
{ "text": [ "Evaluation of the irrigation application rate compared to soil infiltration rate on existing irrigation systems" ], "answer_start": [ 80 ] }
Kelley, L. (2013a). Efficient irrigation application volumes change throughout crop development. https://www.canr.msu.edu/news/efficient_irrigation_application_volumes_change_throughout_crop_development
1057300
Irrigation
Checkbook method of irrigation scheduling follows the concept that the soil in your field is like a bank checking account. Rainfall and irrigation applications are deposits into the checking account. Rainfall and irrigation may need to be reduced to reflect the effective amount added to soil moisture. Daily water removal from evaporation and transpiration (evapotranspiration or E.T.) from the field and crop would be considered withdrawals from the account. Soil has a maximum amount of water that can be held (called Field Capacity), so water added beyond the soils water holding capacity is lost to the account. Irrigation applied at a rate exceeding the infiltration capacity will cause surface runoff and be lost to the soil water balance account.
What is considered to be a deposit into a checking account?
{ "text": [ "Rainfall" ], "answer_start": [ 123 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #6 - Irrigation Aspects of Land Lease Agreements. https://www.canr.msu.edu/uploads/235/67987/lyndon/LandRent.pdf
1071868
Irrigation
Infiltration rate decreases with increased wetting time. Therefore, the amount of water applied during each application affects the fraction of water that enters the soil and the fraction of runoff. Small pockets and depressions in the soil surface hold a volume of water at that location until the soil surface receives the water. Midseason cultivation or in-row soil surface modification (i.e. dammer/diker) increases the surface storage.
What does the amount of water applied during each application affect?
{ "text": [ "the fraction of water that enters the soil and the fraction of runoff" ], "answer_start": [ 128 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1062426
Irrigation
Assembly directions - Option 1: The 2 x 3 inch stud chunks wedge into the base of the cut plastic drain pipe sections, and make the transition between the cup and post. Electric fence post should fit snug into the drill hole. A screw may be placed through the side of the plastic drain pipe into the 2 x 3 inch stud chunks. Electric fence post and cups can be stored and transported in separate stacks.
When building a catch can test, how should you place the screw?
{ "text": [ "A screw may be placed through the side of the plastic drain pipe into the 2 x 3 inch stud chunks." ], "answer_start": [ 226 ] }
Kelley, L. (2020). Irrigation Fact Sheet #16 - Catch Can Stands for Rain Gauges and Uniformity Check for Evaluating Irrigation.
1056696
Irrigation
P.A. 33 of 2006 amended Michigan's Natural Resources Protection Act as part 327 of 451. Changes included: (e) Groundwater withdraw location by latitude/longitude: Starting with the 2006 report, large scale water users will need to provide the latitude/longitude for the groundwater withdrawal location. This information may be provided by handheld GPS units or the groundwater mapping website. Providing the latitude/longitude location of withdrawal will allow mapping and analysis of effect on groundwater and stream base flow by withdraws in the watershed basin.
What is the benefit of providing the latitude and longitude of a withdrawal site?
{ "text": [ "stream base flow by withdraws in the watershed basin" ], "answer_start": [ 511 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1047681
Irrigation
Both acts use the same definition for a "large capacity well". Large capacity wells are those with the capacity to withdraw 100000 gallons per day (70 gal/min) on average in any consecutive 30-day period. The combined capacity of more than one well at a site that is 100000 gallons or greater capacity/day (70 gal/min), also meets the large capacity well definition. Water use reporting also includes surface water withdrawals with single or combined capacity at a site of 100000 gal/day (70 gal/min) on average, in any consecutive 30-day period. All agricultural water uses (irrigation, cooling, animal watering, etc.) will apply to these laws. Well pumping capacity is included in the well log that should have been filed if the well was drilled after 1968 and are generally available at the local health department, from well drillers or at the MDEQ website.
Where is the well pumping capacity included?
{ "text": [ "well log" ], "answer_start": [ 687 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1121887
Irrigation
Table 1. Example corn yield loss estimates when stress occurs for four or more consecutive days. Adapted from Classen and Shaw, 1970; Rhoads and Bennet, 1990; and Shaw, 1988. The Corn Development stage known as early vegetative (VE - V12) has an estimated Yield Loss per Day of Stress of 1-3. The Corn Development stage known as Late vegetative (V12 to VT) has an Estimated Yield Loss per Day of Stress of 2-5. The Corn Development stage known as Pollination to Blister (R2) has an Estimated Yield Loss per Day of Stress of 3-9. The Corn Development stage known as Milk (R3) has an Estimated Yield Loss per Day of Stress of 3-6. The Corn Development stage known as Dough (R4) has an Estimated Yield Loss per Day of Stress of 3-5. The Corn Development stage known as Dent (R5) has an Estimated Yield Loss per Day of Stress of 2-4. The Corn Development stage known as Maturity (R6) has an Estimated Yield Loss per Day of Stress of 0.
What is the estimated yield loss per day of stress for corn in the V12-VT development stage?
{ "text": [ "2-5" ], "answer_start": [ 407 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1094945
Irrigation
(7) System leaks and bad sprinklers: Start the system up and pressurize it. Look for leaks and bad sprinklers, create a list of units in need of attention. Remember to check risers and other irrigation pipe areas that may need attention. Small leaks can saturate the soil and weaken force blocks used to hold underground pipe and plugs in place. Create a list of pressure and flow meter readings (if available) for each pumping station and pivot point. Knowing the starting pressure can help diagnose in-season irrigation problems in the future.
What can help me diagnose in-season irrigation problems in the future?
{ "text": [ "Knowing the starting pressure " ], "answer_start": [ 453 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1068534
Irrigation
Even when the lessee provides all off the irrigation equipment and the water supply, rent value should be expected to be higher than local dry land rent prices. Land rent prices for irrigated ground are often higher than the cost of installing irrigation spread over a seven or ten year schedule. In most situations the additional profit for establishing irrigation on rental property is evident or the lessee would not be seeking to proceed. This opportunity cost for irrigation may be as small as 10% of the rent value or as great as 200% added to local dry land rent values. The prevalence of high dollar irrigated specialty crops are a major factor in the variability.
What would motivate a lessee to proceed with their role?
{ "text": [ "additional profit for establishing irrigation on rental property is evident" ], "answer_start": [ 320 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #6 - Irrigation Aspects of Land Lease Agreements. https://www.canr.msu.edu/uploads/235/67987/lyndon/LandRent.pdf
1072701
Irrigation
How to Get More Out of Your Irrigation System: (4) Schedule irrigation applications. Have a plan to determine the appropriate amount of water to be applied to a crop at the correct time to avoid yield loss and conserve water. Under watering will reduce yield potential leaving valuable crop inputs under utilized. Over watering can waste nature resources and potentially push nutrient out of the root zone. Several irrigation scheduling tools are available at the website.
Where can I find irrigation scheduling tools?
{ "text": [ "the website." ], "answer_start": [ 460 ] }
Kelley, L. (2009b). Irrigation Fact Sheet #8 - How to Get More from your Irrigation System. https://www.canr.msu.edu/uploads/235/67987/lyndon/HGMIrrSys.pdf
1008550
Irrigation
Question: Can I bury the drippers? Excerpt: We recommend having the drippers or ' in. dripline above ground or covered by mulch to prevent clogging. The drippers should be installed above grade, and if necessary secured by a stake.
Why should I not bury the drippers?
{ "text": [ "to prevent clogging" ], "answer_start": [ 128 ] }
DIG Corp. (2024). Drip Irrigation FAQ’s. https://www.digcorp.com/drip-irrigation-faqs/
1080785
Irrigation
(7) Map your irrigation ideas. Acquire an aerial map of all the land in question for your irrigation projects. Excellent maps and tools are available from Google maps and others or your local USDA Farm Service Agency paper map and a pencil/compass will work. Identify large spaces of land you have available that are adjacent to or may share water sources. Identify major excavation needs such as woodlot or fence line removal. Identify drainage ditch and wet areas that will require modifications for the system to cross.
What other tools are needed for mapping irrigation?
{ "text": [ "compass" ], "answer_start": [ 240 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08.22.pdf
1095088
Irrigation
In some situations, irrigators have equipment that applies water faster than the water can infiltrate into the soil. In these situations, smaller application volumes will reduce the potential for runoff or uneven application to the roots. Sprinklers that provide larger wetted diameters will have less runoff issues. Matching sprinkler performance to field/soil conditions and leaving more crop residue on the soil surface are two methods to reduce potential runoff without increasing evaporative loss from increased number of applications.
What can reduce the potential for runoff or uneven application to the roots?
{ "text": [ "smaller application volumes" ], "answer_start": [ 138 ] }
Kelley, L. (2014c). Irrigation Fact Sheet #14 - Irrigation Application Volumes. https://www.canr.msu.edu/uploads/235/67987/FactSheets/14_IrrigationApplication.pdf
1080778
Irrigation
(1) Irrigation water requirements. Is water available in the quantities needed to irrigate? In Michigan and Indiana evaporation and plant water use from the soil are between 0.25 inch and 0.30 inch for several days each summer, systems that can provide 5 gal/acre irrigated will meet the 0.25 inch/day. Seven gal/acre irrigated is needed to provide 0.30 inch water requirements. This capacity will be require 24 hours per day 7 days per week continued pumping in time of drought.
How many inches per day can a 7 gallon/acre irrigated system provide?
{ "text": [ " 0.30 inch" ], "answer_start": [ 187 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08.22.pdf
1080828
Irrigation
(11) Crop rotation and tillage preferences. Among the traditional crops, commercial corn and alfalfa have shown the greatest economic advantage to irrigation. Small grains and soybeans have offered some of the lowest returns from added investment in irrigation. Changes in crop rotations often result from adding irrigation. Although it is not always the case, a smaller proportion of irrigated fields are managed using no till systems then non-irrigated fields. Excessive corn residue produced on irrigated fields might be part of the reason.
Which crops have the lowest returns from added investment in irrigation?
{ "text": [ "Small grains and soybeans" ], "answer_start": [ 159 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08.22.pdf
1062873
Irrigation
(9) Check solid set system coverage patterns: Coverage from a solid set system is dependent on each individual sprinkler. Inspect the coverage after bringing the system to designed pressure. Visual inspection of each sprinkler while running will often find the major problems. Comparing pressure reading from sprinklers furthest from the source to the design specification will often indicate hidden leaks or under supplied systems.
What is the benefit of visually inspecting each sprinkler when they are running?
{ "text": [ "will often find the major problems" ], "answer_start": [ 241 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1073016
Irrigation
(1a) Existing on February 28, 2006 ' Subject to water use reporting. These withdrawals from either wells or surface water are exempt from the new adverse resource impact standards. This is often termed as "Grandfathering", but these withdrawals may still be required to share the water resource with both other "grandfathered" users and with all new users since the legislation still hold Michigan's water use as a riparian right.
What is "grandfathering"?
{ "text": [ "These withdrawals from either wells or surface water are exempt from the new adverse resource impact standards" ], "answer_start": [ 69 ] }
Kelley, L., Miller, S., & Loudon, T. (2006). Irrigation Fact Sheet #1- Agricultural Water Use Reporting for 2006 Changes in Water Use Regulation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/1_AgWaterUseReporting11-29-06.pdf
1094970
Irrigation
By mid-June the crop is near its full rooting depth, increasing the effective water holding capacity and lowering the potential of loss below the roots. At the same time, the potential for rainfall decreases and crop water use increases, allowing producers to increase their application volume to the 0.75 inch per application range. Typical crop water use would be 0.15 inches per day, making one 0.75 inch application last about 5 days.
What happens by mid-June?
{ "text": [ "the crop is near its full rooting depth" ], "answer_start": [ 12 ] }
Kelley, L. (2014c). Irrigation Fact Sheet #14 - Irrigation Application Volumes. https://www.canr.msu.edu/uploads/235/67987/FactSheets/14_IrrigationApplication.pdf
1093674
Irrigation
The inherent risk of injecting fertilizer into a water system dictates the need for backflow protection. Both Indiana and Michigan have resource protection rules that require the use of Chemigation valves for the protection of both surface and ground water sources. Chemigation valves create an air gap in the pipe line downstream from the pump when the pump is shut down. The air gap breaks the suction created by water retreat back to groundwater or surface water. Chemigation valves for most irrigation application are available from local irrigation dealers for less than $700. Installation cost is much less at the time of pump installation and should be included in almost all new irrigation pumping installations.
What do resource protection rules require?
{ "text": [ " require the use of Chemigation valves for the protection of both surface and ground water sources" ], "answer_start": [ 166 ] }
Kelley, L. (2013). Irrigation Fact Sheet #12 - Nitrogen Application with Irrigation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/12_NitrogenApplicationWithIrrigationFact_Sheet.pdf
1121794
Irrigation
If pollination is good, manage the field as normal. If pollination is poor, those kernels will develop normally with reduced yield potential. These field may be considered for forage or silage harvest. If there is no pollination, there are two options; (1) harvest as near to pollination as possible for the highest quality forage possible or (2) leave the crop as a living cover crop until the fall before mowing or chopping. Continual leaf rolling of the plant in the weeks leading up to pollination can result in a yield loss of 1-5 percent per day. During pollen shed and silking severe stress can reduce yields by up to nine percent per day. In the weeks following pollination drought stress can reduce yield by up to six percent per day.
In what case should I manage the field as normal?
{ "text": [ "If pollination is good" ], "answer_start": [ 0 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1011656
Irrigation
Question: What are the different types of irrigation? Excerpt: There are different types of irrigation systems depending on the soil type, water requirement, weather of the region etc. They are: Surface irrigation, Micro irrigation, Sprinkler irrigation, Sub irrigation
What do the different irrigation types depend on?
{ "text": [ "soil type" ], "answer_start": [ 128 ] }
Rivulis. (2023). Types of Irrigation: A Comprehensive Guide | Rivulis. https://www.rivulis.com/exploring-different-types-of-irrigation-and-their-applications/
1057001
Irrigation
Increasing the amount of water that may enter the soil in a given period of time: The total application of water will also affect the fraction of the water that may enter the soil in a given time period. Small pockets and depressions in the soil surface will hold a volume of water at that location, until the soil surface can receive the water. Midseason cultivation or in-row soil surface modification (dammer/dikers) will increase the soils surface holding capacities.
During what season is the holding capacity of the soil's surface supposed to increase?
{ "text": [ "Midseason cultivation" ], "answer_start": [ 346 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1071885
Irrigation
Determining the irrigation application rate is part of the planning process for new irrigation systems. It is measured by the average irrigation application rate from a particular point along the machine and is expressed as inches per hour. To determine application rate divide the amount of water applied by the elapsed time (from the first drop of water landing at a point in the field to the last drop hitting the point).
In what units is the irrigation application rate expressed?
{ "text": [ "as inches per hour." ], "answer_start": [ 221 ] }
Kelley, L. (2014). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1079888
Irrigation
In extreme situations of average daily temperatures over 90 degrees, low relative humidity and wind, water use may reach 0.31 to 0.33 inches per day. Crops that cannot tolerate extremes may need an irrigation system designed to meet a requirement of one inch every 3 days (6.5 gallons/minute/acre of irrigation). Systems design capacity of greater than 6.5 gallons/minute/acre of irrigation are only needed in situations where crop management practice result in water application at rates faster than the soil infiltration rate resulting in water loss below the root zone or less than 100% effective water use.
When are system design capacities of greater than 6.5 gallons/minute/acre of irrigation needed?
{ "text": [ "in situations where crop management practice result in water application at rates faster than the soil infiltration rate" ], "answer_start": [ 407 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1062792
Irrigation
(11) End gun adjustments: Make sure you are covering every foot of planted ground possible and are not watering areas that are not cropped. Fine adjustments now can improve coverage area or keep you out of trouble if irrigation water ends up where it should not be. Avoid going overboard fine tuning, higher surface and ground water levels in the spring can give a little bigger coverage area in the spring that they will late summer for some systems.
During which season, should you expect large coverage from ground water?
{ "text": [ "spring" ], "answer_start": [ 347 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1075970
Irrigation
Annual operating costs will include an estimate of energy cost and labor attributable to the average operation of the equipment. For calculation purposes an annual use of six 1 inch applications of irrigation was used. A greater number of small applications will favor systems that have low labor costs, where a smaller number of large applications would favor systems with high labor and low investment attributes. Systems with low energy cost primarily from low pumping cost are favored by higher total annual use where low initial cost often compensate for higher energy cost if a low total volume of water is applied annually.
what do low initial costs and a low total volume of water applied annually compensate for?
{ "text": [ "higher energy cost " ], "answer_start": [ 560 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1094990
Irrigation
As July nears, irrigation goals need to switch to maximizing water to the root zone. Potential to loose water below the root zone lessens with higher crop water use and less chance of potential rain fall meeting crop needs. Transpiration is more effective use of water than evaporation from soil or leaf surface, providing an opportunity for irrigators to maximize effective water use by minimizing the time they wet the plant leaf and soil surface. Limiting the number of time the foliage is wetted also reduces the potential for many foliar crop diseases.
Does rainfall meet crop needs better or less in July?
{ "text": [ "less chance of potential rain fall meeting crop needs" ], "answer_start": [ 169 ] }
Kelley, L. (2013a). Efficient irrigation application volumes change throughout crop development. https://www.canr.msu.edu/news/efficient_irrigation_application_volumes_change_throughout_crop_development
1057699
Irrigation
Evapotransporation rate (E.T.) is a term that represents the daily water lost by the plants maintenance and growth along with the evaporative loss from the soil surface. E.T. rates for almost all crops grown in northern Indiana and Michigan have rates under 0.25 inches per day for all but a few extreme days.
What is the expected daily application rate to irrigate most crops in Michigan?
{ "text": [ "0.25 inches per day" ], "answer_start": [ 258 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1093752
Irrigation
The inherent risk of injecting fertilizer into a water system dictates the need for backflow protection. Both Indiana and Michigan have resource protection rules that require the use of Chemigation valves for the protection of both surface and ground water sources. Chemigation valves create an air gap in the pipe line downstream from the pump when the pump is shut down. The air gap breaks the suction created by water retreat back to groundwater or surface water. Chemigation valves for most irrigation application are available from local irrigation dealers for less than $700. Installation cost is much less at the time of pump installation and should be included in almost all new irrigation pumping installations.
How much does a chemigation valve cost?
{ "text": [ "less than $700" ], "answer_start": [ 566 ] }
Kelley, L. (2013). Irrigation Fact Sheet #12 - Nitrogen Application with Irrigation. https://www.canr.msu.edu/uploads/235/67987/FactSheets/12_NitrogenApplicationWithIrrigationFact_Sheet.pdf
1072210
Irrigation
Instructions for completing the Evaluating Potential Irrigation Runoff Form. (4) Center pivots'Starting at the pivot point and progressing to the furthest reaches of the machine, pace or measure 50-foot increments along that line to identify observation points, or identify three equally spaced observation points under each span. Solid set or travelers'Start at one edge of the wetted area and progress to the opposite side, pace or measure 50-foot increments along that line to identify observation points.
How many observation points should be under each span in a center pivot system?
{ "text": [ "three equally spaced" ], "answer_start": [ 274 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1062441
Irrigation
A simple, inexpensive catch can stand can be built using: 1. 32 oz. disposable soda cup (Taco Bell cup) 2. 3 inch plastic drain pipe cut to 5 inch in length 3. 2 x 3 inch stud, cut to length to wedge into plastic drain pipe (drill hole partially through the chunk of wood to accommodate the fence post) 4. Steel (step-in) electric fence post
What should be the length of the drain pipe used to build a catch can stand?
{ "text": [ "3 inch" ], "answer_start": [ 107 ] }
Kelley, L. (2020). Irrigation Fact Sheet #16 - Catch Can Stands for Rain Gauges and Uniformity Check for Evaluating Irrigation.
1121899
Irrigation
Applying nitrogen fertilizer or crop protection products through a center pivot is an efficient and effective method. In fact, it is a well-documented best management practice to apply nitrogen fertilizer as close to the time the corn will use it to get the most efficient use of the fertilizer. Most of the products are injected into the pivot with a fixed rate injection pump. So, how does one figure the pumping rate to set the pump at, and what about the change the end gun causes when it's turned on and off? We will discuss both challenges in this article.
When is the best management practice to apply nitrogen fertilizer to the corn to get the most efficient use of the fertilizer?
{ "text": [ "as close to the time the corn will use it" ], "answer_start": [ 205 ] }
Melvin, S. (2023a). How to Determine the Chemigation Injection Pump Setting for a Center Pivot with the End Gun Off and On. UNL CropWatch. https://cropwatch.unl.edu/2023/how-determine-chemigation-injection-pump-setting-center-pivot-end-gun-and
1069450
Irrigation
Infiltration rate is the quantity of water that can enter the soil in a specified time interval. Heavier soils such as clay and clay loam take water in at a slower rate than sands and sandy loams. Tillage method and surface compaction affect infiltration rate. Conservation tillage and no-till result in the highest infiltration rates while disc and moldboard tillage result in the lowest rates, particularly after several wetting events. Michigan soils have infiltration rates from as slow as one-half inch per hour to as fast as three inches per hour. Estimates for water infiltration rates are included in the Physical and Chemical Properties of Soils section of the soil survey for each county.
What kind of soils take water in at a faster rate?
{ "text": [ "sandy loams" ], "answer_start": [ 184 ] }
Kelley, L. (2014). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1062439
Irrigation
A simple, inexpensive catch can stand can be built using: 1. 32 oz. disposable soda cup (Taco Bell cup) 2. 3 inch plastic drain pipe cut to 5 inch in length 3. 2 x 3 inch stud, cut to length to wedge into plastic drain pipe (drill hole partially through the chunk of wood to accommodate the fence post) 4. Steel (step-in) electric fence post
What other cup can you used if you do not have a soda cup to build a simple, inexpensive catch can test?
{ "text": [ "Taco Bell cup" ], "answer_start": [ 89 ] }
Kelley, L. (2020). Irrigation Fact Sheet #16 - Catch Can Stands for Rain Gauges and Uniformity Check for Evaluating Irrigation.
1072025
Irrigation
Instructions for completing the Evaluating Potential Irrigation Runoff Form. (2) Select a radial transect line (for center pivots) or a transect line representing the watering pattern (for solid set or traveler systems) through the identified lowest infiltration/highest runoff potential area of the field identified above.
What should I select for traveler systems when completing the Evaluating Potential Irrigation Runoff Form?
{ "text": [ "a transect line representing the watering pattern" ], "answer_start": [ 134 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1011569
Irrigation
Question: What are the important parameters I should look at in an irrigation water quality report? Excerpt: Most irrigation water analysis reports will provide a list of cations (calcium, magnesium, sodium and potassium) and anions (bicarbonate, carbonate, sulfate and chloride) along with pH, total dissolved solids (TDS), electrical conductivity (EC) and the sodium adsorption ratio (SAR). The cations, anions and TDS will be listed as milligrams per liter (mg/l) or the equivalent, parts per million (ppm). The two most important factors are TDS or EC and SAR. The TDS of a water sample is a measure of the concentration of soluble salts in the water, which include all the cations and anions. TDS is estimated from the EC of the water. The more dissolved minerals in the water, the higher the EC. The units of EC can be listed as millimhos per centimeter (mmhos/cm), micromhos per centimeter (umhos/cm) or deciSiemens per meter (dS/m). One millimho per centimeter is equal to 1000 micromhos per centimeter or 1 dS/m. TDS can be estimated by multiplying the EC (in umhos/cm) by 0.64. For example, the TDS of a water sample with an EC of 2000 umhos/cm (2.0 dS/m) would be about 1280 mg/l. The SAR of a water sample is the proportion of sodium to calcium and magnesium in the water. Since it is a ratio, SAR has no units. For most soils in North Dakota, any water with an EC greater than 2000 micromhos per centimeter (2 mmhos/cm or 2 dS/m) or an SAR value greater than 6 is not generally recommended for continuous irrigation. However, soils with a high sand content can use water with an SAR up to 9.
What does the TDS of a water sample tell you?
{ "text": [ "the concentration of soluble salts in the water, which include all the cations and anions" ], "answer_start": [ 607 ] }
Fipps, G. (2021). Irrigation Water Quality Standards And Salinity Management Strategies. https://irrigation.tamu.edu/files/2021/04/EB-1667.pdf
1011666
Irrigation
Question: What is gravity irrigation? Excerpt: Gravity system is a basic irrigation system consisting of an elevated reservoir, the pipe from the bottom of the reservoir to the irrigation system which can be either hand operated or battery operated to control the time and rate of water application. The reservoir of the gravity system is filled by harvesting rainwater.
How can the pipe from the bottom of the reservoir be operated?
{ "text": [ "hand operated or battery operated" ], "answer_start": [ 215 ] }
AgriFarming. (2023). Frequently Asked Questions about Irrigation (FAQs) | Agri Farming. https://www.agrifarming.in/frequently-asked-questions-about-irrigation-faqs
1057561
Irrigation
The registration process also calls for an estimate of consumptive water use. Consumptive water use is the amount of water that is lost from the area of withdrawal. Since most water pumped for crop irrigation ultimately goes into evapotransporation, the consumptive use is estimated to be high or about 90%. Water used for harvest cooling is mostly retuned back to surface or groundwater so the consumptive use is estimated to be low or about 5 to 10%.
What happens to most of the water pumped for crop irrigation?
{ "text": [ "goes into evapotransporation" ], "answer_start": [ 220 ] }
Kelley, L. (2007). Irrigation Fact Sheet #4 - Michigan Registration for New Agricultural Withdrawals. https://www.canr.msu.edu/uploads/235/67987/lyndon/MIRegNewAgWith.pdf
1011624
Irrigation
Question: What are the important parameters I should look at in an irrigation water quality report? Excerpt: Most irrigation water analysis reports will provide a list of cations (calcium, magnesium, sodium and potassium) and anions (bicarbonate, carbonate, sulfate and chloride) along with pH, total dissolved solids (TDS), electrical conductivity (EC) and the sodium adsorption ratio (SAR). The cations, anions and TDS will be listed as milligrams per liter (mg/l) or the equivalent, parts per million (ppm). The two most important factors are TDS or EC and SAR. The TDS of a water sample is a measure of the concentration of soluble salts in the water, which include all the cations and anions. TDS is estimated from the EC of the water. The more dissolved minerals in the water, the higher the EC. The units of EC can be listed as millimhos per centimeter (mmhos/cm), micromhos per centimeter (umhos/cm) or deciSiemens per meter (dS/m). One millimho per centimeter is equal to 1000 micromhos per centimeter or 1 dS/m. TDS can be estimated by multiplying the EC (in umhos/cm) by 0.64. For example, the TDS of a water sample with an EC of 2000 umhos/cm (2.0 dS/m) would be about 1280 mg/l. The SAR of a water sample is the proportion of sodium to calcium and magnesium in the water. Since it is a ratio, SAR has no units. For most soils in North Dakota, any water with an EC greater than 2000 micromhos per centimeter (2 mmhos/cm or 2 dS/m) or an SAR value greater than 6 is not generally recommended for continuous irrigation. However, soils with a high sand content can use water with an SAR up to 9.
What SAR level in water is generally not recommended for continuous irrigation?
{ "text": [ "SAR value greater than 6" ], "answer_start": [ 1449 ] }
Fipps, G. (2021). Irrigation Water Quality Standards And Salinity Management Strategies. https://irrigation.tamu.edu/files/2021/04/EB-1667.pdf
1119313
Irrigation
Water is extremely important for crop production. When water becomes limiting to the plant it is important to understand how plants use water. We often hear the term evapotranspiration (ET) in relation to plant water demand. ET is a combination of soil water evaporation (E) and water used by the plant during transpiration (T). Soil evaporation is the major loss of water surface and typically is higher after rain and under high temperature conditions.
What is evapotranspiration?
{ "text": [ " a combination of soil water evaporation (E) and water used by the plant during transpiration" ], "answer_start": [ 230 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1080755
Irrigation
(5) Water registration. Irrigation water use almost always is considered a large volume water use (capacity to pump > 70 gal./min). In both Indiana and Michigan new installations require a registration. In Indiana this is handled by Indiana DNR. In Michigan you will need to work through the Michigan Water Withdrawal Assessment Tool to determine if your proposed water use is likely to cause a negative environmental impact. At the end of the process you will either be able to register online or may be required to request a site specific review by MDEQ. MDEQ site specific reviews may result in allocation of the water resulting in registration or the opportunity to bring together all large volume water users in the watershed to negotiate reducing use by existing water users to allow allocations for a new water use.
Who handles irrigation registrations in Indiana?
{ "text": [ "Indiana DNR." ], "answer_start": [ 233 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08
1071880
Irrigation
Infiltration rate decreases with increased wetting time. Therefore, the amount of water applied during each application affects the fraction of water that enters the soil and the fraction of runoff. Small pockets and depressions in the soil surface hold a volume of water at that location until the soil surface receives the water. Midseason cultivation or in-row soil surface modification (i.e. dammer/diker) increases the surface storage.
What is the result of dammers?
{ "text": [ "increases the surface storage" ], "answer_start": [ 410 ] }
Kelley, L. (2014a). Irrigation Fact Sheet #7- Reducing and Evaluating Irrigation Runoff.Instantaneous irrigation application rates compared to soil infiltration rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/7_ReducingAndEvalRunoff.pdf
1062868
Irrigation
(9) Check solid set system coverage patterns: Coverage from a solid set system is dependent on each individual sprinkler. Inspect the coverage after bringing the system to designed pressure. Visual inspection of each sprinkler while running will often find the major problems. Comparing pressure reading from sprinklers furthest from the source to the design specification will often indicate hidden leaks or under supplied systems.
How can you use sprinklers to find hidden leaks in your system?
{ "text": [ "Comparing pressure reading from sprinklers furthest from the source to the design specification" ], "answer_start": [ 277 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1120610
Irrigation
Effects on pollinating corn: Drought stress 7-10 days ahead of silking can result in delayed silk development. When combined with heat stress this delay could result in poor anthesis silking interval (ASI). Water stress during pollination (tasseling through silking) not only delays silking, but also reduces silk elongation, and if severe, impedes embryo development. With temperatures greater than 95oF, low humidity, and low soil moisture level, silks will desiccate or become non-receptive to pollen. Pollen grains may also be damaged from desiccation when they are released for tassel anthers. When temperatures greater than 100oF , pollen grains are killed. Drought stress during pollination ultimately results in poor pollination and fewer kernels per ear.
What are the consequences of water stress during pollination of corn?
{ "text": [ " not only delays silking, but also reduces silk elongation, and if severe, impedes embryo development" ], "answer_start": [ 266 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1072772
Irrigation
How to Get More Out of Your Irrigation System: (8) Consider fertigation to apply at least part of the nitrogen budgeted for the year. Split nitrogen applications reduce potential of early season loss during wet periods. Fertigation allows nitrogen application right when maximum nitrogen is used by the crop, with low labor and fuel use and no compaction of the soil. Make sure the system application is uniform and correct backflow safety valves and safety shut-downs are in place to protect the water supply for you and the neighbors.
What does fertigation allow for?
{ "text": [ "nitrogen application right when maximum nitrogen is used by the crop," ], "answer_start": [ 239 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #8 - How to Get More from your Irrigation System. https://www.canr.msu.edu/uploads/235/67987/lyndon/HGMIrrSys.pdf
1062467
Irrigation
(17) Stop barricades: Pivots that make partial circles often use stop barricades at the edge of the water area. Check stops for integrity, making sure that the height is still appropriate for the machine s turnoff mechanism. Manually operate the turn off arms on the pivot to make sure that they are functioning. Newer style stop barricades are designed to catch and spin the tire against the barricade allowing the safety system to shut the pivot down as a backup safety system.
How do the newer stop barricades ensure backup safety?
{ "text": [ "catch and spin the tire against the barricade" ], "answer_start": [ 357 ] }
Kelley, L. (2017). Irrigation Fact Sheet #15 - Irrigation Inspection and Repair. https://www.canr.msu.edu/uploads/235/67987/factsheets/15_Irriation_Inspection_and_Repair_v2_4.21.17.pdf
1080811
Irrigation
(9) Get multiple bids. Use irrigation professionals to your advantage. Take your best ideas to at least two irrigation sales/design people. Many will have access to excellent mapping and planning software tools, plus they will have far more experience than most producers in irrigation system design. Compare potential designs on a cost per irrigated acre basis (for an average years irrigation). This process will help equalize investment in equipment with energy cost and labor.
What will comparing potential designs on a cost per irrigated acre basis help me do?
{ "text": [ "equalize investment in equipment with energy cost and labor" ], "answer_start": [ 420 ] }
Kelley, L. (2011). New irrigation planning checklist - MSU Extension. https://www.canr.msu.edu/news/new_irrigation_planning_checklist
1072208
Irrigation
Instructions for completing the Evaluating Potential Irrigation Runoff Form. (4) Center pivots'Starting at the pivot point and progressing to the furthest reaches of the machine, pace or measure 50-foot increments along that line to identify observation points, or identify three equally spaced observation points under each span. Solid set or travelers'Start at one edge of the wetted area and progress to the opposite side, pace or measure 50-foot increments along that line to identify observation points.
How long should the increments be along a line to identify observation points for a center pivot system?
{ "text": [ "50-foot" ], "answer_start": [ 195 ] }
Kelley, L. (2014b). Irrigation Fact Sheet #13 - Reducing and Evaluating Irrigation Runoff. https://www.canr.msu.edu/uploads/236/43605/FactSheets/13_ReducingAndEvaluatingIrrigationRunoff_5-9-14.pdf
1080746
Irrigation
(4) Water rights and regulation. Make sure you understand your rights and obligation to use water in your State. Example: Michigan operates as a riparian state for surface water use allowing only the property with legal description adjacent to the surface water to receive the water, but well water may be transferred between properties.
How does Michigan operate in terms of rights and obligations of water use?
{ "text": [ "riparian state for surface water use" ], "answer_start": [ 145 ] }
Kelley, L. (2022). Irrigation Fact Sheet #11- Checklist for Planning Irrigation Systems. https://www.canr.msu.edu/irrigation/upoads/files/11ChecklistForPlanningIrrigationSystems08.22.pdf
1123908
Irrigation
The key to knowing the correct setting for the chemigation pump is to determine how many acres per hour the pivot will cover at the desired irrigation application depth or rate. Chemigation injection pumps are calibrated in gallons per hour (gph). So, if you know how much product you want to apply per acre -e.g., 10 gallons/acre - and how many acres the pivot will irrigate per hour - e.g., five acres/hour - then you will know how many gallons per hour the pump will need to deliver.
What can I figure out by knowing how much product you want to apply per acre and how many acres the pivot will irrigate per hour?
{ "text": [ "you will know how many gallons per hour the pump will need to deliver" ], "answer_start": [ 416 ] }
Melvin, S. (2023a). How to Determine the Chemigation Injection Pump Setting for a Center Pivot with the End Gun Off and On. UNL CropWatch. https://cropwatch.unl.edu/2023/how-determine-chemigation-injection-pump-setting-center-pivot-end-gun-and
1008969
Irrigation
Question: What do I do if my controller shows no display? Excerpt: Check to see if you have power going to the controller.' If not, check circuit breakers & GFI outlets in your home to see if they have been tripped.' If you have power, but no display, unplug controller for 2 minutes then plug back in.' If still no display,' see if there is a reset button on your controller - hold for 10 seconds.' Still no display?' Controller may have gone bad.
What do I do if I run out of options with my controller showing no display?
{ "text": [ "reset button on your controller" ], "answer_start": [ 344 ] }
Carolina Irrigation. (2024). FAQ | Carolina Irrigation | Residential & Commercial Irrigation Experts Since 1999. https://www.carolinairrigation.net/faq
1011606
Irrigation
Question: What are the important parameters I should look at in an irrigation water quality report? Excerpt: Most irrigation water analysis reports will provide a list of cations (calcium, magnesium, sodium and potassium) and anions (bicarbonate, carbonate, sulfate and chloride) along with pH, total dissolved solids (TDS), electrical conductivity (EC) and the sodium adsorption ratio (SAR). The cations, anions and TDS will be listed as milligrams per liter (mg/l) or the equivalent, parts per million (ppm). The two most important factors are TDS or EC and SAR. The TDS of a water sample is a measure of the concentration of soluble salts in the water, which include all the cations and anions. TDS is estimated from the EC of the water. The more dissolved minerals in the water, the higher the EC. The units of EC can be listed as millimhos per centimeter (mmhos/cm), micromhos per centimeter (umhos/cm) or deciSiemens per meter (dS/m). One millimho per centimeter is equal to 1000 micromhos per centimeter or 1 dS/m. TDS can be estimated by multiplying the EC (in umhos/cm) by 0.64. For example, the TDS of a water sample with an EC of 2000 umhos/cm (2.0 dS/m) would be about 1280 mg/l. The SAR of a water sample is the proportion of sodium to calcium and magnesium in the water. Since it is a ratio, SAR has no units. For most soils in North Dakota, any water with an EC greater than 2000 micromhos per centimeter (2 mmhos/cm or 2 dS/m) or an SAR value greater than 6 is not generally recommended for continuous irrigation. However, soils with a high sand content can use water with an SAR up to 9.
What does a higher EC mean?
{ "text": [ "more dissolved minerals in the water" ], "answer_start": [ 745 ] }
Fipps, G. (2021). Irrigation Water Quality Standards And Salinity Management Strategies. https://irrigation.tamu.edu/files/2021/04/EB-1667.pdf
1079899
Irrigation
There are tremendous differences in cost of establishing irrigation. Several factors can lead to low water source cost (less than $15000). Factors leading to high water source cost (greater than $50000) are the reciprocal of what is listed:.(a) productive water tables are close to the surface (less than 40 feet). (b) riparian rights to a dependable surface water option adjacent to field. (c) ample three phase electric power is readily available near the pumping site. (d) system is designed for moderate to low pumping pressure. (e) Hills and Steep slopes may require higher pressures and large wetted areas to reduce chance of run-off.
What kind of pumping in a system leads to low water source cost?
{ "text": [ "low pumping pressure." ], "answer_start": [ 511 ] }
MSU Extension. (2024). Irrigation Costs - Irrigation. https://www.canr.msu.edu/irrigation/Irrigation-Planning-/irrigation-costs
1121819
Irrigation
Drought symptoms in soybean: Soybean respond to drought stress by flipping their leaves over so the underside of the soybean leaf is turned up. A less obvious sign of drought stress in soybean is diminished vegetative growth which normally occurs prior to leaf flipping. In severe drought conditions, the leaf trifoliates will close or clamp together with the center leaflet being sandwiched between the outside leaflets.
What happens to soybeans in severe drought conditions?
{ "text": [ "the leaf trifoliates will close or clamp together with the center leaflet being sandwiched between the outside leaflets" ], "answer_start": [ 301 ] }
Licht, M., & Archontoulis, S. (2017). Influence of Drought on Corn and Soybean | Integrated Crop Management. https://crops.extension.iastate.edu/cropnews/2017/07/influence-drought-corn-and-soybean
1069425
Irrigation
Option to purchase the farm in future: Seek professional help. A lawyer that works with land rental could advise you how to add these sections to your lease agreement
What could a lawyer that works with land rental help me with?
{ "text": [ "advise you how to add these sections to your lease agreement" ], "answer_start": [ 106 ] }
Kelley, L. (2009a). Irrigation Fact Sheet #6 - Irrigation Aspects of Land Lease Agreements. https://www.canr.msu.edu/uploads/235/67987/lyndon/LandRent.pdf
1057295
Irrigation
Irrigation Scheduling Tools: Irrigation scheduling by accounting for changes in available soil moisture provides information on the timing and amount of water to apply to meet crop needs. "Checkbook" irrigation scheduling confirmed with soil moisture monitoring can improve irrigation scheduling decisions. Checkbook scheduling is discussed below.
What type of irrigation scheduling can improve scheduling decisions?
{ "text": [ " \"Checkbook\" irrigation scheduling" ], "answer_start": [ 187 ] }
Kelley, L., & Miller, S. (2019). Irrigation Fact Sheet #3 - Irrigation Scheduling Tools. https://www.canr.msu.edu/uploads/236/43605/FactSheets/3_IrrigationSchedulingTools5.14.pdf
1057778
Irrigation
Several factors can lead to low distribution equipment costs which can be achieved with the right combination of the following: total size of irrigated areas - the bigger the system the lower the cost (a) shape of the irrigated areas - 160 acre squares are hard to beat (b) three phase electric power is readily available near control panels (c) flat topography - hills and slopes require shorter pivot spans to maintain crop clearance.
To maintain crop clearance, would you use a shorter or longer pivot spans?
{ "text": [ "shorter" ], "answer_start": [ 389 ] }
Kelley, L. (2007b). Irrigation Fact Sheet #5 - Estimating Annual Irrigation Costs. https://www.canr.msu.edu/uploads/235/67987/irrigation_costs/5_Estimating_Annual_Irrigation_Costs.pdf
1072817
Irrigation
New legislation was enacted in Michigan to improve the management of the Great Lakes basin water resources to conform to the goals of the Great Lakes Compact and following agreements. The eight States and two Canadian Provinces that surround the Great Lakes have worked for over a decade to improve the management of water resources in the Great Lakes basin. Now that the Great Lakes Compact has become federal law (in October, 2008), proposed water diversions from the Great Lakes can be legally denied.
What have the surrounding regions of the Great Lakes been trying to do?
{ "text": [ "to improve the management of water resources in the Great Lakes basin" ], "answer_start": [ 288 ] }
Kelley, L. (2009c). Irrigation Fact Sheet #9 - Michigan Large Volume Water Use Requirements. https://www.canr.msu.edu/uploads/235/67987/lyndon/9largewaterwith.pdf

Dataset Card for AgXQA 1.1

Dataset Summary

The Agricultural eXtension Question Answering Dataset (AgXQA 1.1) is a small-scale, SQuAD-like QA dataset targeting the Agriculture Extension domain. Version 1.1 currently contains 2.1K+ questions related to irrigation topics across the US, focusing on the Midwest since our crops of interest were mainly soybean and corn.

Supported Tasks and Leaderboards

Question Answering.

Languages

English (en).

Dataset Structure

Data Instances

agxqa_v1

An example from the 'test' split looks as follows.

Please note that the "context" of this example was too long and was cropped:

{
    "answers": {
        "answer_start": [78, 21],
        "text": [' the rate water can enter the soils surface', 'the quantity of water that can enter the soil in a specified time interval']
    },
    "context": "Irrigation Fact Sheet # 2: Instantaneous Rates. The soils infiltration rate is the rate water can enter the soils surface. Michigan soils...",
    "id": "1170477",
    "question": "what is infiltration rate?",
    "category": "Irrigation",
    "references": "Kelley, L. (2007a). Irrigation Fact Sheet # 2 - Irrigation Application Instantaneous Rates. https://www.canr.msu.edu/uploads/235/67987/FactSheets/2_IrrigationApplicationRates1.30.pdf",
}

Data agxqa_v1

The data fields are the same among all splits.

agxqa_v1

  • id: a string feature.
  • category: a string feature.
  • context: a string feature.
  • question: a string feature.
  • answers: a dictionary feature containing:
    • text: a string feature.
    • answer_start: a int32 feature.
  • references: a string feature.

Data Splits

name train validation test
agxqa_v1 1503 353 330

Dataset Creation

Curation Rationale

The creation of this dataset aims to enhance the performance of NLP models (e.g., LLMs) in understanding and extracting relevant information about agro-hydrological practices for crops such as corn and soybeans.

Scope and Domain

The dataset specifically focuses on irrigation practices, techniques, and related agricultural knowledge concerning corn and soybeans. This includes, but is not limited to:

  • irrigation laws and policies
  • irrigation methods (e.g., drip, sprinkler, furrow),
  • irrigation scheduling,
  • soil moisture monitoring,
  • crop growth stage,
  • crop water requirements,
  • general crop (soybean and corn) characteristics

Source Data

Initial Data Collection and Normalization

About ~600 paragraphs (e.g., context) were extracted from the Agriculture Extension Corpus (AEC1.1). For more details about AEC1.1's data sources, please refer to its dataset card here.

Who are the source language producers?

  • CECO curated and supervised the creation and annotations of the QA pairs.
  • Regarding the original paragraphs/contexts, please see here.

Annotations

Annotation process

We followed the general guidelines described in Rajpurkar et al. (2016), which also inspired us to create a SQUAD-like dataset. We leveraged Deepset's annotation tool to annotate the paragraphs and create the QA pairs.

Our main guidelines can be summarized as follows:

  • Question formulation: Based on the rationale in the paragraph, the extracted questions represented common queries by farmers and agricultural practitioners regarding irrigation.
  • Answer collection: Already present in the paragraph, so the annotations cover both short and long:
    • clauses
    • subjects
    • predicates
    • phrases (nouns, verbs, adjectives and adverbials)
  • Quality control: Domain experts reviewed and validated the QA pairs to ensure accuracy and relevance. This review was conducted weekly on 50% of the annotated batch (randomly selected) for that week. Diversity and Coverage: Since the crops of interest (soybeans and corn) are mostly grown in the Midwest states of the USA, most of the QA pairs cover those states. However, the dataset also includes general irrigation QA pairs that are applicable in most states.
  • Ethical considerations: To maintain transparency and credibility, we cited the original authors of the annotated paragraphs for each QA pair. Please see the annotated example provided above.

For more information on the annotation process, please refer to the accompanying paper.

Who are the annotators?

There were three annotators in total, two with a background in agricultural and environmental topics. Two experts in water and irrigation research hired them and supervised their annotations.

Personal and Sensitive Information

  • Some original paragraphs contained extension educators' names and email addresses, but these have been analyzed accordingly. In other words, they have been replaced with x 's in our dataset.
  • For each paragraph, we referenced the main article, where the context was extracted.

Considerations for Using the Data

Social Impact of Dataset

More Information Needed

Discussion of Biases

  • Version 1.1 is quite small, compared to most QA datasets, and only contains irrigation-related topics, so we suggested not using it in production since, in the real world, agriculture-based questions require temporal and geospatial information, which is not covered yet.
  • We found three paragraphs that contained URLs (links to an Extension YouTube video and a decision support tool). These are outliers and do not necessarily provide implicit answers. They will be removed in version 2.

Other Known Limitations

More Information Needed

Citation Information

BibTeX:

@article{KPODO2024109349,
    title = {AgXQA: A benchmark for advanced Agricultural Extension question answering},
    journal = {Computers and Electronics in Agriculture},
    volume = {225},
    pages = {109349},
    year = {2024},
    issn = {0168-1699},
    doi = {https://doi.org/10.1016/j.compag.2024.109349},
    url = {https://www.sciencedirect.com/science/article/pii/S0168169924007403},
    author = {Josué Kpodo and Parisa Kordjamshidi and A. Pouyan Nejadhashemi},
    keywords = {Agricultural Extension, Question-Answering, Annotated Dataset, Large Language Models, Zero-Shot Learning},
    abstract = {Large language models (LLMs) have revolutionized various scientific fields in the past few years, thanks to their generative and extractive abilities. However, their applications in the Agricultural Extension (AE) domain remain sparse and limited due to the unique challenges of unstructured agricultural data. Furthermore, mainstream LLMs excel at general and open-ended tasks but struggle with domain-specific tasks. We proposed a novel QA benchmark dataset, AgXQA, for the AE domain to address these issues. We trained and evaluated our domain-specific LM, AgRoBERTa, which outperformed other mainstream encoder- and decoder- LMs, on the extractive QA downstream task by achieving an EM score of 55.15% and an F1 score of 78.89%. Besides automated metrics, we also introduced a custom human evaluation metric, AgEES, which confirmed AgRoBERTa’s performance, as demonstrated by a 94.37% agreement rate with expert assessments, compared to 92.62% for GPT 3.5. Notably, we conducted a comprehensive qualitative analysis, whose results provide further insights into the weaknesses and strengths of both domain-specific and general LMs when evaluated on in-domain NLP tasks. Thanks to this novel dataset and specialized LM, our research enhanced further development of specialized LMs for the agriculture domain as a whole and AE in particular, thus fostering sustainable agricultural practices through improved extractive question answering.}
}

APA:

Kpodo, J., Kordjamshidi, P., & Nejadhashemi, A. P. (2024). AgXQA: A benchmark for advanced Agricultural Extension question answering. Computers and Electronics in Agriculture, 225, 109349. https://doi.org/10.1016/J.COMPAG.2024.109349 
Downloads last month
52
Edit dataset card

Models trained or fine-tuned on msu-ceco/agxqa_v1