Digital – in the vehicle Vehicle document wallet Familiarize yourself with the con-Here you can find comprehensive tents of the Operator's Manual information about operating your directly via the vehicle's multime-vehicle and about services and dia system (menu item "Vehicle guarantees in printed form. information"). Start with the quick guide or broaden your knowledge with practical tips. É2955847401]ËÍ 2955847401 Order no. P295 0068 13 Part no. 295 584 74 01 Edition C 2023 EQEOperator's ManualMercedes-BenzMercedes-Benz EQE & WARNING Risk of injury or fatal injuries if the front passenger air bag is enabled If the front passenger air bag is enabled, a child on the front passenger seat may be struck by the front passenger air bag in the event of an accident. # NEVER use a rearward-facing child restraint system on a seat with an ENA­BLED FRONT AIR BAG. This can result in the DEATH of or SERIOUS INJURY to the CHILD. Observe the chapter "Children in the vehicle". Air bag warning sticker for USA and Canada Internet Further information about Mercedes-Benz vehi­cles and about Mercedes-Benz AG can be found on the following websites: https://www.mbusa.com (USA only) https://www.mercedes-benz.ca (Canada only) Documentation team ©Mercedes-Benz AG: Not to be reprinted, transla­ted or otherwise reproduced, in whole or in part, without written permission from Mercedes-Benz AG. Vehicle manufacturer Mercedes-Benz AG Mercedesstraße 120 70372 Stuttgart Germany As at 17.11.21 Before you first drive off, read this operator's manual carefully and familiarize yourself with your vehicle. For your own safety and a longer operat­ing lifespan of the vehicle, follow the instructions and warning notices in this operator's manual. Disregarding them may result in damage to the vehicle or personal injury. Damage to the vehicle resulting from the disre­gard of the instructions is not covered by the Mercedes-Benz Limited Warranty. The equipment and product description of your vehicle may vary and depends on the following factors: R Model R Order R National version R Availability Your vehicle may therefore differ, in individual cases, from that described and shown in the illus­trations. Mercedes-Benz reserves the right to introduce changes in the following areas: R Design R Equipment R Technical features The following documents are integral parts of the vehicle: R Digital operator's manual R Printed operator's manual R Service booklet R Equipment-dependent supplements R Supplementary documents Keep these documents in the vehicle at all times. Ensure that all documents are in the vehicle or passed on in the event of sale or rental. Mercedes-Benz USA, LLC Mercedes-Benz Canada, Inc. A Daimler Company 2955847401 2955847401 Contents Symbols .......................................................... 5 At a glance ...................................................... 6 Cockpit (central display) .................................. 6 Cockpit (MBUX Hyperscreen) .......................... 8 Indicator and warning lamps (standard) ......... 10 Indicator and warning lamps (with driver camera) ........................................................ 14 Overhead control panel ................................. 18 Door operating unit and seat adjustment ....... 20 Emergencies and breakdowns ....................... 22 Digital Operator's Manual .............................. 24 Calling up the Digital Operator's Manual ........ 24 General notes ............................................... 25 Protection of the environment ....................... 25 Mercedes-Benz GenuineParts ........................ 25 Operator's manual ........................................ 26 Touch-sensitive controls ................................ 27 Mercedes me app ......................................... 27 Service and vehicle operation ........................ 28 Operating safety ............................................ 29 Notes on mounting the license plate on the front license plate holder ......................... 32 Declaration of conformity for vehicle installed radio components ........................... 32 Diagnostics connection ................................. 32 Qualified specialist workshop ........................ 34 Correct use of the vehicle ............................. 34 Notes for persons with electronic medical aids .............................................................. 34 Problems with your vehicle ............................ 35 Reporting safety defects ................................ 35 Limited Warranty ........................................... 36 QR code for rescue card ............................... 36 Data storage ................................................. 36 Copyright ...................................................... 41 Occupant safety ............................................ 42 Restraint system ........................................... 42 Seat belts ..................................................... 44 Airbags ......................................................... 48 PRE-SAFE® system ........................................ 56 Automatic measures after an accident ........... 57 Safely transporting children in the vehicle ...... 57 Notes on pets in the vehicle .......................... 71 Opening and closing ...................................... 72 SmartKey ...................................................... 72 Doors ............................................................ 76 Trunk ............................................................ 87 Side windows ................................................ 93 Sliding sunroof .............................................. 96 Anti-theft protection .................................... 100 Seats and stowing ....................................... 103 Notes on the correct driver's seat position .. 103 Notes on grab handles ................................ 103 Seats .......................................................... 104 Steering wheel ............................................ 115 Easy entry and exit feature .......................... 116 Memory function ......................................... 118 Stowage areas ............................................ 119 Cup holder .................................................. 127 Sockets ....................................................... 131 Wireless charging of the mobile phone and connection with the exterior antenna .... 132 Installing and removing the floor mats ......... 135 Light and visibility ........................................ 136 Exterior lighting ........................................... 136 Contents Interior lighting ............................................ 147 Windshield wiper and windshield washer system ........................................................ 149 Mirrors ........................................................ 151 Area permeable to radio waves on the windshield ................................................... 154 Infrared-reflective windshield function ......... 155 Climate control ........................................... 156 Overview of climate control systems ............ 156 Operating the climate control system .......... 159 Driving and parking ..................................... 171 Driving ........................................................ 171 DYNAMIC SELECT button ............................ 184 Transmission ............................................... 186 Function of the 4MATIC ............................... 188 Charging the high-voltage battery ................ 188 Parking ....................................................... 204 Driving and driving safety systems ............... 211 Vehicle towing instructions .......................... 279 Driver display .............................................. 280 Notes on the driver's display ....................... 280 Notes on the range ..................................... 280 Operating the driver's display ...................... 281 Driver display menus ................................... 282 Head-up Display .......................................... 282 Overview of status displays on the driver's display ........................................................ 284 MBUX multimedia system ............................ 286 Overview and operation ............................... 286 System settings .......................................... 303 AMG TRACK PACE ....................................... 308 Drive system settings .................................. 313 Navigation and traffic .................................. 313 Telephone ................................................... 326 Mercedes me app ....................................... 329 Mercedes-Benz emergency call system ....... 336 Sound settings ............................................ 339 Maintenance and care ................................. 340 ASSYST PLUS service interval display .......... 340 Maintenance Management .......................... 341 Telediagnosis .............................................. 341 Engine compartment ................................... 342 Refilling the windshield washer system ........ 344 Cleaning and care ....................................... 344 Breakdown assistance ................................. 352 Emergency .................................................. 352 Flat tire ....................................................... 353 Battery (vehicle) .......................................... 359 Tow starting or towing away ........................ 361 Electrical fuses ............................................ 367 Wheels and tires ......................................... 370 Notes on noise or unusual handling char­acteristics ................................................... 370 Notes on regularly inspecting wheels and tires ............................................................ 370 Notes on snow chains ................................. 371 Activating or deactivating snow chain mode .......................................................... 371 Tire pressure ............................................... 372 Loading the vehicle ..................................... 377 Tire labeling ................................................ 381 Definition of terms for tires and loading ....... 386 Changing a wheel ........................................ 388 Contents Emergency spare wheel ............................... 398 Technical data ............................................. 399 Notes on technical data .............................. 399 Vehicle electronics ...................................... 399 Regulatory radio identification and notes ..... 401 Vehicle identification plate, VIN and engine number overview .............................. 401 Operating fluids ........................................... 403 Vehicle data ................................................ 407 Display messages and warning/indicator lamps .......................................................... 409 Display messages ........................................ 409 Warning and indicator lamps ....................... 474 Index .......................................................... 490 Symbols In this operator's manual, you will find the follow­ing symbols: & WARNING Danger due to failure to observe the warning notices Warning notices draw your attention to haz­ards that may endanger your health or life, or the health or life of others. # Observe the warning notices. + ENVIRONMENTAL NOTE Environmental damage due to failure to observe environ­mental notes Environmental notes include information on environmentally responsible behavior or envi­ronmentally responsible disposal. # Observe environmental notes. * NOTE Damage to property due to failure to observe notes on material damage Notes on material damage inform you of risks which may lead to your vehicle being dam­aged. # Observe notes on material damage. % Useful instructions or further information that could be helpful to you. # Instruction (/ page) Further information on a topic Display Display in the central display 4 Highest menu level, which is to be selected in the multimedia system 5 Relevant submenus, which are to be selected in the multimedia system * Indicates a cause At a glance – Cockpit (central display) Left-hand-drive vehicles (with central display) At a glance – Cockpit (central display) 7 1 ± Increases recuperation . 180 Ü Switches the MBUX multimedia system . 286 q Reduces recuperation . 180 on/off 2 Combination switch . 137 a Switches sound on/off . 286 3 Driver's display . 281 ø Adjusts the volume . 286 4 DIRECT SELECT lever . 186 9 £ Hazard warning light system . 138 5 Central display . 286 A Start/stop button . 175 6 Glove box . 120 B Control panel for the MBUX multimedia system . 295 7 Stowage space . 120 C Adjusts the steering wheel . 115 8 Switch panel for: D ! Electric parking brake . 208 ÷ DYNAMIC SELECT button . 185 E Diagnostics connection . 32 c Active Parking Assist . 266 F Light switch . 136 û Calls up the EQ menu . 203 G Control panel: Driver's display . 281 \ Quick vehicle access H Active Distance Assist DISTRONIC . 225 ú Fingerprint sensor . 286 At a glance – Cockpit (MBUX Hyperscreen) Left-hand-drive vehicles (with MBUX hyperscreen) At a glance – Cockpit (MBUX Hyperscreen) 1 ± Increases recuperation . 180 q Reduces recuperation . 180 2 Combination switch . 137 3 DIRECT SELECT lever . 186 4 MBUX hyperscreen with: Driver's display . 280 Central display . 286 Front passenger display . 286 5 Control panel for the MBUX multimedia system . 295 6 Glove box . 120 7 Stowage space . 120 8 £ Hazard warning light system . 138 9 Switch panel for: ÷ DYNAMIC SELECT button . 185 c Active Parking Assist . 266 û Calls up the EQ menu . 203 \ Quick vehicle access ú Fingerprint sensor . 286 Ü Switches the MBUX multimedia system on/off . 286 a Switches sound on/off . 286 ø Adjusts the volume . 286 A Start/stop button . 175 B Adjusts the steering wheel . 115 C ! Electric parking brake . 208 D Diagnostics connection . 32 E Light switch . 136 F Control panel: Driver's display . 281 H Active Distance Assist DISTRONIC . 225 Standard driver's display 1 #! Turn signal lights . 137 2 Ú System error . 477 3 ä Suspension (red) . 483 ä Suspension (yellow) . 483 4 # Electrical malfunction . 477 5 Ù Power steering (red) . 478 Ù Power steering (yellow) . 478 Ù Rear axle steering (red) . 478 Ù Rear axle steering (yellow) . 478 6 6 Restraint system . 476 7 üSeat belt . 476 8 L Distance warning . 483 9 !ABS . 485 A h Tire pressure monitoring system . 488 B åESP® OFF . 485 ÷ESP® . 485 C _ Reduced power . 477 D õ Operational readiness of drive system . 175 E ! Electric parking brake (yellow) . 480 F Electric parking brake (red) . 480 F USA only ! Canada only G Brakes (red) . 480 $ USA only J Canada only é Recuperative Brake System, USA only . 480 J Brakes (yellow), Canada only . 480 H R Range I Charge level display J KHigh beam . 137 L Low beam . 136 T Standing lights . 136 12 At a glance – Indicator and warning lamps (standard) K R Rear fog light . 137 L H Mercedes-Benz emergency call system . 487 Driver's display with driver camera 1 Ú System error . 477 2 #! Turn signal lights . 137 3 üSeat belt . 476 4 L Distance warning . 483 5 6 Restraint system . 476 6 _ Reduced power . 477 7 h Tire pressure monitoring system . 488 8 åESP® OFF . 485 ÷ESP® . 485 9 !ABS . 485 A õ Operational readiness of drive system . 175 B ! Electric parking brake (yellow) . 480 C Electric parking brake (red) . 480 F USA only ! Canada only D Brakes (red) . 480 $ USA only J Canada only é Recuperative Brake System, USA only . 480 J Brakes (yellow), Canada only . 480 E R Range F Charge level display G R Rear fog light . 137 H KHigh beam . 137 L Low beam . 136 T Standing lights . 136 I H Mercedes-Benz emergency call system . 487 J # Electrical malfunction . 477 K Ù Power steering (red) . 478 Ù Power steering (yellow) . 478 Ù Rear axle steering (red) . 478 Ù Rear axle steering (yellow) . 478 16 At a glance – Indicator and warning lamps (with driver camera) L ä Suspension (red) . 483 ä Suspension (yellow) . 483 At a glance – Overhead control panel 19 1 Sun visors 2 c Switches the front interior lighting on/off 3 u Switches the rear interior lighting on/off 4 ; me button 5 | Switches automatic interior lighting con­trol on/off 6 G SOS button . . . . . 147 147 329 147 329 8 3 Opens/closes the panoramic sliding sun­roof 3 Opens/closes the panoramic sliding sun­roof roller sunblind 9 PASSENGER AIR BAG indicator lamps A Inside rearview mirror B Switches the left-hand reading lamp on/off . . . . . 96 96 53 152 147 7 Switches the right-hand reading lamp on/off . 147 At a glance – Door operating unit and seat adjustment 21 ßÜ Locks/unlocks the vehicle . 77 9 W Opens/closes the right side window . 93 Opens the door Adjusts the seats electrically w Switches the seat heating on/off s Switches the seat ventilation on/off V Operates the memory function p Opens/closes the trunk lid Í Operates the outside mirrors . . . . . . . 76 106 113 114 119 87 151 A W Opens/closes the rear right side window B S Child safety lock for the rear side win­dows C W Opens/closes the rear left side window D W Opens/closes the left side window E Adjusts the head restraints F Seat adjustment using the multimedia system . . . . . . 93 70 93 93 108 111 1 B-pillar with: 6 Operating the high-voltage disconnect device . 172 QR code for accessing the rescue card . 36 7 £ Hazard warning light system . 138 information label on tire pressure . 373 8 Socket flap with: 2 Safety vests . 352 QR code for accessing the rescue card . 36 3 ; me button . 329 9 First-aid kit (soft sided) . 353 G SOS button . 329 A Towing away . 361 4 Towing away . 361 B TIREFIT kit . 355 5 Flat tire . 353 C Warning triangle . 352 You can search for keywords using the Search field in order to quickly find answers to questions Multimedia system: about the operation of the vehicle. 4 © 5 Settings 5 Info 5 Operator's Manual 5 Open Digital Operator's Manual The Digital Operator's Manual describes the func­tions and operation of the vehicle and the multi­media system. # Select one of the following menu items in the Digital Operator's Manual: R Quick start: find the first steps towards adjusting your seat (driver's side). R Tips: find information that prepares you for certain everyday situations with your vehicle. R Animations: watch animations about the vehi­cle functions. R Messages: find additional information about the messages on the driver's display. R Language: select the language for the Digital Operator's Manual. 1Menu2Search3Back4Contents sectionSome sections in the Digital Operator's Manual, such as warning notes, can be expanded and col­lapsed. Additional options for calling up the Digital Opera- tor's Manual: Driver's display: call up brief information about display messages on the driver's display MBUX Voice Assistant: call up via the voice con­ trol system Global search: call up search results for contents of the Digital Operator's Manual on the home screen For safety reasons, the Digital Operator's Manual is deactivated while the vehicle is in motion. + ENVIRONMENTAL NOTE Environmental damage due to operating conditions and personal driving style Operate your vehicle in an environmentally responsible manner to help protect the envi­ronment. Please observe the following recom­mendations on operating conditions and per­sonal driving style. Operating conditions: # Make sure that the tire pressures are correct. # Do not carry any unnecessary weight (e.g. roof luggage racks once you no lon­ger need them). # Monitor energy consumption. # Adhere to the service intervals. A regularly serviced vehicle will contrib­ute to environmental protection. # Always have maintenance work carried out at a qualified specialist workshop. Personal driving style: # Drive carefully and maintain a suitable distance from the vehicle in front. # Avoid frequent, sudden acceleration and braking. # Drive in a way that conserves energy. Pay attention to the ECO display for an economical driving style. + ENVIRONMENTAL NOTE Environmental pollution caused by irresponsible disposal of the high-voltage battery A high-voltage battery contains materials which are harmful to the environment. # Dispose of defective high-voltage batter­ies at a qualified specialist workshop. Environmental issues and recommendations: It is recommended that you re-use or recycle materials instead of just disposing of them. The relevant environmental guidelines and regula­tions serve to protect the environment and must be strictly observed. + ENVIRONMENTAL NOTE Environmental damage due to not using recycled recon­ditioned components Mercedes-Benz AG offers recycled recondi­tioned components and parts with the same quality as new parts. The same entitlement from the Limited Warranty is valid as for new parts. # Use recycled reconditioned components and parts from Mercedes-Benz AG. * NOTE Impairment of the operating effi­ciency of the restraint systems from installing accessory parts or from repairs or welding Air bags and Emergency Tensioning Devices, as well as control units and sensors for the restraint systems, may be installed in the fol­lowing areas of your vehicle: R doors R door pillars R sill R seats R cockpit R driver's display R center console R lateral roof frame # Do not install accessory parts such as audio systems in these areas. # Do not carry out repairs or welding. # Have accessories retrofitted at a quali­fied specialist workshop. You could jeopardize the operating safety of your vehicle if you use parts, tires and wheels as well as accessories relevant to safety which have not been approved by Mercedes-Benz. Safety-relevant systems (e.g. the brake system) may malfunction. Only use Mercedes-Benz GenuineParts or parts of equal quality. Only use tires, wheels and acces­sory parts that have been specifically approved for your vehicle model. Mercedes-Benz GenuineParts are subject to strict quality inspections. Each part has been specially developed, manufactured or selected for Mercedes-Benz vehicles and adapted to them. Therefore, only Mercedes-Benz GenuineParts should be used. More than 300,000 different Mercedes-Benz Gen­uineParts are available for Mercedes-Benz mod­els. All authorized Mercedes-Benz Service Centers maintain a supply of Mercedes-Benz GenuineParts for necessary service and repair work. In addition, strategically located parts delivery centers pro­vide for quick and reliable parts service. Always specify the vehicle identification number (VIN) (/ page 401) when ordering Mercedes-Benz GenuineParts. This Operator's Manual and the Digital Operator's Manual in the vehicle describe the following mod­els and the standard and special equipment for your vehicle: R The models and the standard and special equipment available at the time of this Opera-tor's Manual going to press. R The models and the standard and special equipment only available in certain countries. R The models and the standard and special equipment, which will only be available at a later date. Note that your vehicle may not be installed with all features described. This is also the case for systems relevant to safety. Therefore, the equip­ment on your vehicle may differ from that in the descriptions and illustrations. The original purchase agreement for your vehicle contains a list of the equipment in your vehicle at the time of delivery. Should you have any questions concerning equip­ment and operation, please consult an authorized Mercedes-Benz Center. The Operator's Manual, Operating Instructions, further supplementary documents and Service Booklet are important documents and should be kept in the vehicle. In addition to conventional switches and buttons, your vehicle is equipped with touch-sensitive con­trols. These are located in the following areas of your vehicle: R Roof and door control panel R Climate control R Steering wheel R MBUX multimedia system The controls have touch-sensitive user interface surfaces. The surfaces are controlled by pressing or swiping to adjust settings or to trigger func­tions, forexample. In the area of the touchscreen, you also receive haptic feedback in the form of a pulse or a vibra­tion, or the surface structure changes on the touch-sensitive user interface surface, forexam­ple. You receive haptic feedback in the following situa­tions, forexample: R When pressing a button on the user interface surface R When scrolling in a list or table R When reaching a new area on the user inter­face surface, e.g. a pop-up window When handling touch-sensitive user interface sur­faces, observe the following points to avoid prob­lems operating: R Do not affix stickers orsimilar objects on the surfaces R Keep the surfaces protected from moisture and wet conditions R Keep the surfaces free of dust and dirt (/ page 349). Some touch-sensitive control elements have a symbol and integrated indicator lamps. When operating, make sure to press on the symbol of the control element. Notes about the on-demand feature You can also activate various functions (on­demand feature) subsequently via Mercedes me after purchasing your vehicle. Information is available at any authorized Mercedes-Benz Service Center. Activating on-demand feature using Mercedes me Requirements R The vehicle has a wireless connection. R The vehicle is linked to the Mercedes me user account. # Add the desired on-demand feature for the vehicle to the shopping basket in the Mercedes me Store. # Complete the order. The on-demand feature is activated when operating the vehicle. Speeding up activation # Switch the vehicle off and lock it. # Unlock the vehicle after about two minutes and switch on the vehicle. The on-demand feature has been activated. For some features, a notification also appears in the vehicle's multimedia system. If the activation was not successful, repeat the process. Vehicle operation outside the USA or Canada When you are abroad with your vehicle, observe the following points: R service points or replacement parts may not be available immediately. Some Mercedes-Benz models are available in Europe through our European Delivery Program. For more information, please consult an author­ized Mercedes-Benz Service Center, or write to one of the following addresses: in the USA: Mercedes-Benz USA, LLC European Delivery Department One Mercedes-Benz Drive Sandy Springs, GA 30328 in Canada: Mercedes-Benz Canada, Inc. European Delivery Department 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9 Maintenance Your customer advisor confirms the service in the service report. Roadside Assistance The Mercedes-Benz Roadside Assistance Program offers technical help in the case of a breakdown. Your calls to the toll-free Roadside Assistance Hotline are answered by our agents 24 hours a day, 365 days a year. 1-800-FOR-MERCedes (1-800-367-6372) (USA) 1-800-387-0100 (Canada) You can find further information in the Mercedes- Benz Roadside Assistance Program brochure (USA) or the "Roadside Assistance" section in the Service and Warranty booklet (Canada). You will find both in the vehicle document wallet. Change of address or change of ownership In the event of a change of address, please send us the "Notification of address change" in the Service and Guarantee booklet or simply call the Mercedes-Benz Customer Assistance Center (USA) on the hotline number 1-800-FOR-MERCedes (1-800-367-6372) or Cus­tomer Service (Canada) on 1-800-387-0100. We can then reach you in a timely fashion, if neces­sary. If you sell your Mercedes, please leave all litera­ture in the vehicle so that it is available to the next owner. If you have purchased a used vehicle, please send us the "Notice of Purchase of Used Car" in the Service and Guarantee booklet or sim­ply call the Mercedes-Benz Customer Assistance Center (USA) at the hotline number 1-800-FOR-MERCedes (1-800-367-6372) or Cus­tomer Service (Canada) at 1-800-387-0100. Possible danger due to substances hazardous to health In compliance with Proposition 65 ("Prop65"), the following detachable label has been added to each vehicle sold in California: & WARNING Risk of accident due to mal­functions or system failures If you do not have the prescribed service/ maintenance work or any required repairs car­ried out, this could result in malfunctions or system failures. # Always have the prescribed service and maintenance work as well any required repairs carried out at a qualified special­ist workshop. & WARNING Risk of accident or injury due to incorrect modifications on electronic component parts Modification of electronic components, their software or wiring could impair their function and/or the function of other networked com­ponent parts or safety-relevant systems. This can endanger the operating safety of the vehicle. # Never tamper with the wiring and elec­tronic component parts or their soft­ware. # You should have all work on electrical and electronic components carried out at a qualified specialist workshop. Observe the "On-board electronics" section in "Technical data". * NOTE Impairment of the operating effi­ciency of the vehicle or individual compo­nents due to tampering with the on-board electronics The vehicle is equipped by the manufacturer with various safety mechanisms that interact with each other. If the system detects tampering with the on-board electronics due to an unauthorized modification of control units and/or their soft-ware/data, this may have the following effects: R Individual vehicle functions are (tempora­rily) no longer operational. R The overall vehicle is (temporarily) no lon­ger operational. # Have the vehicle checked immediately at a qualified specialist workshop and, if necessary, reset to factory settings. * NOTE Damage to the vehicle caused by driving too fast and by blows to the under-body and chassis parts The vehicle can be damaged in the following cases in particular: R The underside of the vehicle makes con­tact with the ground, e.g. on a high curb or an unpaved road. R The vehicle drives too quickly over an obstacle, e.g. a curb, a speed bump or a pothole. R A heavy object hits the underbody or chas­sis components. In these or similar situations, the vehicle body, the underbody, chassis components, wheels or tires and parts of the high-voltage battery could be damaged even if this is not visible. Components that have been damaged in this way can fail unexpectedly or, in the event of an accident, may not absorb the loads that arise as intended. # Have the vehicle checked and repaired immediately at a qualified specialist workshop. or # If driving safety is impaired during the rest of the journey, stop immediately paying attention to the traffic situation and notify a qualified specialist work­shop. Electric vehicles have an electric motor. The elec­tric motor's energy supply is provided by the high-voltage on-board electrical system. & DANGER Risk of death and fire due to modified and/or damaged components of the high-voltage on-board electrical sys­tem The vehicle's high-voltage on-board electrical system is under high voltage. If you modify component parts in the vehicle's high-voltage on-board electrical system or touch damaged component parts, you may be electrocuted. In addition, modified and/or damaged compo­ nents may cause a fire. In the event of an accident or impact to the vehicle underbody, components of the high- voltage electrical system may be damaged although the damage is not visible. # Never make any modifications to the high-voltage on-board electrical system. # Do not switch on or use the vehicle if its high-voltage on-board electrical system components have been modified or dam­aged. # Never touch damaged components of the high-voltage on-board electrical sys­tem. # After an accident, do not touch any com­ponents of the high-voltage on-board electrical system. # After an accident, have the vehicle trans­ported away. # Have the components of the high-voltage on-board electrical system checked at a qualified specialist workshop and replaced if necessary. The components of the vehicle's high-voltage on-board electrical system are marked with yellow warning stickers. The cables of the high-voltage on-board electrical system are orange. High-voltage components that can become veryhot are marked with an additional warning sticker:Vehicles with electric motors generate signifi­cantly less noise when stationary and while driv­ing than vehicles with combustion engines. Therefore the vehicle may not be heard by other road users due to the significantly reduced noise when stationary and while driving. It is for this reason that the vehicle is equipped with a sound generator, which serves as an acous­tic vehicle alerting system (AVAS). * NOTE Malfunctions and system failures due to incorrect mounting of the license plate on the front license plate holder If the license plate is incorrectly mounted on the front license plate holder, sensors, cam­eras or driving and safety systems may mal­function or fail. Observe the following points when mounting the license plate on the front license plate holder: # Mount the license plate directly on the license plate holder without advertising media or other holders. # Mount the license plate so that it does not protrude above or to the side of the license plate adapter. USA: "Radio based devices of this vehicle comply with Part 15 of the FCC Rules. Operation is sub­ject to the following two conditions: 1) These devi­ces may not cause harmful interference, and 2) These devices must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment." Canada: "This vehicle contains licence-exempt transmitter(s)/receiver(s) that comply with Inno­vation, Science and Economic Development Can­ada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) These devices may not cause interference. (2) These devices must accept any interference, including interfer­ence that may cause undesired operation of the devices." "Les émetteurs/récepteurs dans cette véhicule sont conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux con­ditions suivantes : 1) Ces appareils ne doivent pas produire de brouillage; 2) Ces appareils doivent accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en com­promettre le fonctionnement." The diagnostics connection is a technical inter­face in the vehicle. It is used, for example, during repair and maintenance work or for reading out vehicle data in a specialist workshop. Diagnostic devices should therefore only be connected in a qualified specialist workshop. & WARNING Risk of accident due to con­necting devices to the diagnostics con­nection If you connect devices to the diagnostics con­nection of the vehicle, the function of vehicle systems and operating safety may be impaired. # For safety reasons, we recommend that you use and connect only products approved by an authorized Mercedes-Benz Service Center. & WARNING Risk of accident due to objects in the driver's footwell Objects in the driver's footwell may impede pedal travel or block a depressed pedal. This jeopardizes the operating and road safety of the vehicle. # Stow all objects in the vehicle securely so that they cannot get into the driver's footwell. # Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient room for the pedals. # Do not use loose floor mats and do not place floor mats on top of one another. * NOTE Battery discharging from using devi­ces connected to the diagnostics connec­tion Using devices at the diagnostics connection drains the battery. # Check the charge level of the battery. # If the charge level is low, charge the bat­tery, e.g. by driving a considerable dis­tance. Connecting and using another device with the diagnostics connection can have the following effects: R Malfunctions in the vehicle system R Permanent damage to vehicle components Please refer to the warranty terms and conditions for this matter. An authorized Mercedes-Benz Service Center is a qualified specialist workshop. It has the necessary special skills, tools and qualifications to correctly carry out the work required on your vehicle. This particularly applies to safety-relevant work. For the following, always have your vehicle checked at an authorized Mercedes-Benz Service Center: R Safety-relevant work R Service and maintenance work R Repair work R Modifications as well as installations and con­ versions R Work on electronic components Mercedes-Benz recommends a Mercedes-Benz Service Center. If you remove any warning stickers, you or others could fail to recognize certain dangers. Leave warning stickers in position. Observe the following information in particular when driving your vehicle: R the safety notes in this Operator's Manual, vehicle-specific supplements and further sup­plementary documents R technical data for the vehicle R traffic rules and -regulations R laws and safety standards pertaining to motor vehicles Mercedes-Benz AG cannot, despite carefully developing vehicle systems, completely rule out the interaction of vehicle systems with electronic medical aids such as cardiac pacemakers. In addition, there are components installed in the vehicle that, regardless of the operating status of the vehicle, can generate magnetic fields on a par with permanent magnets. These fields can be found, for example, in the area around the multi­media and sound system or also in the area of the seats, depending on the vehicle equipment. For this reason, the following can occur in isolated cases, depending on the aids used: R Medical aids malfunctioning R Adverse health effects Observe the notes and warnings of the manufac­turer of the medical aids; if in doubt, contact the device manufacturer and/or your doctor. If there is continuing uncertainty concerning the possibil­ity of medical aids malfunctioning, Mercedes-Benz AG recommends using only few electrical vehicle systems and/or maintaining a distance from the components. When charging the high-voltage battery, keep a distance of at least an arm's length between the medical aid and the following components: R The power supply equipment This includes charging stations in the form of a wallbox or a public charging point, for exam­ple. R Vehicle components carrying live voltage This includes the charging cable and the charging control box, for example. Only have repairs and maintenance work in the area of the following components carried out at a qualified specialist workshop: R Vehicle components carrying live voltage R Transmission antenna R Multimedia system and sound system If you have any queries or suggestions, consult a qualified specialist workshop. If you should experience a problem with your vehi­cle, particularly one that you believe may affect its safe operation, we urge you to contact an author­ized Mercedes-Benz Center immediately to have the problem diagnosed and rectified. If the prob­lem is not resolved to your satisfaction, please discuss the problem again with an authorized Mercedes-Benz Center or, if necessary, contact us at one of the following addresses: In the USA: Mercedes-Benz USA, LLC Customer Assistance Center One Mercedes-Benz Drive Sandy Springs, GA 30328 In Canada: Mercedes-Benz Canada, Inc. Customer Relations Department 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9 USA only: The following text is published as required of man­ufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966". If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Mercedes-Benz USA, LLC. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Mercedes-Benz USA, LLC. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to the https:// www.safercar.gov/; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590,: USA. You can also obtain other information about motor vehicle safety from: https://www.safercar.gov Canada only: The following text is published as required of man­ufacturers under subsection 18.4 (4) of the Motor Vehicle Safety Regulations. If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada in addition to notifying Mercedes-Benz Canada Inc. If Transport Canada received similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, Transport Canada cannot become involved in indi­vidual problems between you, your dealer or Mercedes-Benz Canada Inc. To contact Transport Canada, you may call the Defect Investigations and Recalls Division toll-free in Canada at 1-800-333-0510 or 819-994-3328in the Gatineau-Ottawa area or internationally; you may also go to the following websites for more information: R English: https://www.tc.gc.ca/recalls R French: https://www.tc.gc.ca/rappels * NOTE Damage to the vehicle arising from violation of these operating instructions. Damage to the vehicle can arise from violation of these operating instructions. This damage is not covered either by the Mercedes-Benz implied warranty or by the New- or Used-Vehicle Warranty. # Follow the instructions in these operat­ing instructions on proper operation of your vehicle as well as on possible vehi­cle damage. QR codes are attached in the socket flap and on the opposite side on the B-pillar. In the event of an accident, rescue services can use the QR code to quickly find the appropriate rescue card for your vehicle. The current rescue card contains the most important information about your vehicle (e.g. the routing of the electric lines) in compact form. Further information can be obtained at https:// www.mercedes-benz.de/qr-code Data processing in the vehicle Electronic control units Electronic control units are installed in your vehi­cle. Control units process data which, for exam­ple, they receive from vehicle sensors, generate themselves or exchange between themselves. Some control units are required for the safe oper­ation of your vehicle, some assist you when driv­ing, such as driver assistance systems, while oth­ers enable convenience or infotainment functions. The following provides you with general informa­tion regarding data processing in the vehicle. Additional information regarding exactly which data in your vehicle are collected, saved and transmitted to third parties, and for what purpose, can be found in the information directly related to the functional characteristics in question in their respective operating instructions. This information is also available online and, depending on the vehicle equipment, digitally. Personal data Every vehicle is identified by a unique vehicle identification number. Depending on the country, this vehicle identification number can be used by, for example, governmental authorities to deter­mine the identity of the owner. There are other possibilities to use data collected from the vehicle to identify the owner or driver, such as the license plate number. Therefore, data generated or processed by control units may be attributable to a person or, under certain conditions, become attributable to a per­son. Depending on which vehicle data are availa­ble, it may be possible to make inferences about, for example, your driving behavior, your location, your route or your use patterns. Legal requirements regarding the disclosure of data If legally required to do so, manufacturers are, in individual cases, legally obliged to provide govern­mental entities, upon request and to the extent required, data stored by the manufacturer. For example, this may be the case during the investi­gation of a criminal offense. Governmental entities are themselves, in individ­ual cases and within the applicable legal frame­work, authorized to read out data from the vehi­cle. In the case of an accident, information that can help with an investigation can, therefore, be taken from the air bag control unit, for example. Operational data in the vehicle This is data regarding the operation of the vehicle, which have been processed by control units. This includes the following data, for example: R vehicle status information such as the speed, longitudinal acceleration, lateral acceleration, number of wheel revolutions or the fastened seat belts display R ambient conditions, such as temperature, rain sensor or distance sensor Generally, the use of these data is temporary; they will not be stored beyond the period of oper­ation and will only be processed within the vehicle itself. Control units often contain data memories for vehicle keys, for example. Their use permits the temporary or permanent documentation of technical information about the vehicle's operat­ing state, component loads, maintenance require­ments and technical events or malfunctions. Depending on the vehicle equipment, the follow­ing data are stored: R operating status of system components, such as fill levels, tire pressure or battery status R malfunctions or faults in important system components, such as lights or brakes R system reactions in special driving situations, such as air bag deployment or the intervention of stability control systems R information on events leading to vehicle dam­ age R charge level of the high-voltage battery, esti­ mated range In certain cases, it may be required to store data that would have otherwise been used only tempo­rarily. This may be the case if the vehicle has detected a malfunction, for example. If you use services, such as repair services and maintenance work, stored operational data as well as the vehicle identification number can be read out and used. They can be read out by service network employees, such as workshops and manufacturers or third parties, such as break­down services. The same is true in the case of warranty claims and quality assurance measures. In general, the readout is performed via the legally prescribed port for the diagnostics connection in the vehicle. The operational data that are read out document technical states of the vehicle or of individual components and assist in the diagnosis of malfunctions, compliance with warranty obliga­tions and quality improvement. To that end, these data, in particular information about component loads, technical events, malfunctions and other faults may be transmitted along with the vehicle identification number to the manufacturer. Fur­thermore, the manufacturer is subject to product liability. For this reason the manufacturer also uses operational data from the vehicle, for exam­ple, for recalls. These data can also be used to examine the customer's warranty and guarantee claims. Malfunction memories in the vehicle can be reset by a service outlet or at your request as part of repair or maintenance work. Convenience and infotainment functions You can store convenience settings and individual settings in the vehicle and change or reset them at any time. Depending on the vehicle equipment, this includes the following settings, for example: R seat and steering wheel positions R suspension and climate control settings R individual settings, such as interior lighting Depending on the selected equipment, you can import data into vehicle infotainment functions yourself. Depending on the vehicle equipment, this includes the following data, for example: R multimedia data, such as music, films or pho­tos for playback in an integrated multimedia system R address book data for use in connection with an integrated hands-free system or an integra­ted navigation system R entered navigation destinations R data about the use of Internet services These data for convenience and infotainment functions may be saved locally in the vehicle or they may be located on a device which you have connected to the vehicle, such as a smartphone, USB flash drive or MP3 player. If you have entered these data yourself, you can delete them at any time. This data is transmitted from the vehicle to third parties only at your request. This applies, in par­ticular, when you use online services in accord­ance with the settings that you have selected. Smartphone integration (e.g. Android Auto or Apple CarPlay®) If your vehicle is accordingly equipped, you can connect your smartphone or another mobile end device to the vehicle. You can then control them by means of the control elements integrated in the vehicle. Images and audio from the smart­phone can be output via the multimedia system. Certain information is simultaneously transferred to your smartphone. Depending on the type and integration, this includes position data, day/night mode and other general vehicle statuses. For more information please consult the Operator's Manual of the vehicle/infotainment system. This integration allows the use of selected smart­phone apps, such as navigation or music player apps. There is no further interaction between the smartphone and the vehicle; in particular, vehicle data is not directly accessible. The type of addi­tional data processing is determined by the pro­vider of the app being used. Which settings you can make, if any, depends on the specific app and the operating system of your smartphone. Online services Wireless network connection If your vehicle has a wireless network connection, it enables data to be exchanged between your vehicle and additional systems. The wireless net­work connection is made possible by the vehicle's own transmitter and receiver or by a mobile end device that you have brought into the vehicle, for example, a smartphone. Online functions can be used via the wireless network connection. This includes online services and applications/apps provided to you by the manufacturer or by other providers. Manufacturer's services Regarding the manufacturer's online services, the individual functions are described by the manu­facturer in a suitable place, for example, in the Operator's Manual or on the manufacturer's web­site, where the relevant data protection informa­tion is also given. Personal data may be used for the provision of online services. Data is exchanged via a secure connection, such as the manufacturer's designated IT systems. Any per­sonal data which is collected, processed and used, other than for the provision of services, is done so exclusively on the basis of legal permis­sion. This is the case, for example, for a legally prescribed emergency call system, a contractual agreement or when consent has been given. You can have services and functions, some of which are subject to a fee, activated or deactiva­ted. This excludes legally prescribed functions and services, such as an emergency call system. Third-party services If you use online services from other providers (third parties), these services are the responsibil­ity of the provider in question and subject to that provider's data protection conditions and terms of use. As a general rule, the manufacturer has no influence on the content exchanged. For this reason, when services are provided by third parties, please ask the service provider in question for information about the type, extent and purpose of the collection and use of personal data. Data protection rights Depending on your country or the equipment and range of functions of your vehicle as well as the services you use and the services on offer, you are entitled to different data protection rights. Further information on data protection and your data protection rights can either be found on the manufacturer's website or you will receive this information as part of the various services and service offers. There you will also find the contact information for the manufacturer and its data pro­tection officers. At a workshop, for example, with the support of a specialist and possibly for a fee, you can have data read out which is stored only locally in the vehicle. MBUX multimedia system/Mercedes me connect If the vehicle is equipped with the MBUX multime­dia system or Mercedes me connect, additional data about the vehicle's operation, the use of the vehicle in certain situations, and the location of the vehicle may be compiled by the MBUX multi­media system or Mercedes me connect. For additional information, please refer to the "MBUX multimedia system" section and/or the Mercedes me connect Terms and Conditions. Event Data Recorder USA only: This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynam­ics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: R How various systems in your vehicle were operating; R Whether or not the driver and front passenger seat belts were buckled/fastened R How far (if at all) the driver was depressing the accelerator and/or brake pedal; and, R How fast the vehicle was traveling. This data can help provide a better understanding of the circumstances in which crashes and inju­ries occur. NOTE: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under normal driv­ing conditions and no personal data (e.g. name, gender, age and accident location) is recorded. However, other parties, such as law enforcement, could combine EDR data with the type of person­ally identifying data routinely acquired during a crash investigation. Access to the vehicle and/or the EDR is needed to read data that is recorded by the EDR, and spe­cial equipment is required. In addition to the vehi­cle manufacturer, other parties that have the spe­cial equipment, such as law enforcement, can read the information by accessing the vehicle or the EDR. EDR data may be used in civil and criminal mat­ters as a tool in accident reconstruction, accident claims and vehicle safety. Since the Crash Data Retrieval (CDR) tool that is used to extract data from the EDR is commercially available, Mercedes-Benz USA, LLC ("MBUSA") expressly disclaims any and all liability arising from the extraction of this information by unauthorized Mercedes-Benz personnel. MBUSA will not share EDR data with others with­out the consent of the vehicle owner or, if the vehicle is leased, without the consent of the les­see. Exceptions to this representation include responses to subpoenas by law enforcement; by federal, state or local government; in connection with or arising out of litigation involving MBUSA or its subsidiaries and affiliates; or, as required by law. Warning: the EDR is a component of the Restraint System Module. Tampering with, altering, modify­ing or removing the EDR component may result in a malfunction of the Restraint System Module and other systems. State laws or regulations regarding EDRs that conflict with federal regulation are pre-empted. This means that in the event of such conflict, the federal regulation governs. As of December 2016, 17 states have enacted laws relating to EDRs. Free and open source software Information on licenses for free and open-source software used in your vehicle can be found on the data carrier in your vehicle document wallet and with updates on the following website: https://www.mercedes-benz.com/opensource Registered trademarks R Bluetooth® is a registered trademark of Blue­ tooth SIG, Inc. R DTS™ is a registered trademark of DTS, Inc. R Dolby® and MLP™ are registered trademarks of DOLBY Laboratories. R ESP® and PRE-SAFE® are registered trade­marks of Daimler AG. R HomeLink® is a registered trademark of Gen­tex Corporation. R iPod® and iTunes® are registered trademarks of Apple Inc. R Burmester® is a registered trademark of Burmester Audiosysteme GmbH. R Microsoft® and Windows Media® are regis­tered trademarks of Microsoft Corporation. R SIRIUS® is a registered trademark of Sirius XM Radio Inc. R HD Radio™ is a registered trademark of iBiq­uity Digital Corporation. R Gracenote® is a registered trademark of Gracenote, Inc. R ZAGAT Survey® and related brands are regis­tered trademarks of Zagat Survey, LLC. Protection provided by the restraint system The restraint system includes the following com­ponents: R Seat belt system R Air bags R Child restraint system R Child seat anchors The restraint system can help prevent the vehicle occupants from coming into contact with parts of the vehicle interior in the event of an accident. In the event of an accident, the restraint system can also reduce the forces to which the vehicle occu­pants are subjected. A seat belt can only provide the best level of pro­tection if it is worn correctly. Depending on the detected accident situation, Emergency Tension­ing Devices and/or air bags supplement the pro­tection offered by a correctly worn seat belt. Emergency Tensioning Devices and/or air bags are not deployed in every accident. In order for the restraint system to provide the intended level of protection, each vehicle occu­pant must observe the following information: R Fasten seat belts correctly. R Sit in an almost upright seat position with their back against the seat backrest. R Sit with their feet resting on the floor, if possi­ble. R Always secure persons under 5 ft (1.50 m) tall in an additional restraint system suitable for Mercedes-Benz vehicles. However, no system available today can com­pletely eliminate injuries and fatalities in every accident situation. In particular, the seat belt and air bag generally do not protect against objects penetrating the vehicle from the outside. It is also not possible to completely rule out the risk of injury caused by the air bag deploying. Limitations of the protection provided by the restraint system & WARNING Risk of injury or death due to modifications to the restraint system Vehicle occupants may no longer be protected as intended if alterations are made to the restraint system. # Never alter the parts of the restraint sys­tem. # Never tamper with the wiring or any elec­tronic component parts or their soft­ware. If it is necessary to modify the vehicle to accom­modate a person with disabilities, contact an authorized Mercedes-Benz Center for details. USA only: for details, contact our Customer Assis­tance Center on 1-800-FOR-MERCedes (1-800-367-6372). Restraint system functionality When the vehicle is switched on, a self-test is per­formed, during which the restraint system warning lamp 6 lights up. It goes out no later than a few seconds after the vehicle is started. The com­ponents of the restraint system are then func­tional. Malfunctioning restraint system A malfunction has occurred in the restraint sys­tem if: R The 6 restraint system warning lamp does not light up when the vehicle is switched on R The 6 restraint system warning lamp lights up continuously or repeatedly during a journey & DANGER Risk of death due to the restraint system malfunctioning Components in the restraint system may be activated unintentionally or not deploy as intended in an accident. In the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended. You may receive an electric shock if you touch the damaged components of the high-voltage on-board electrical system. # Have the restraint system checked and repaired immediately at a qualified spe­cialist workshop. # After an accident, switch off the vehicle immediately. Function of the restraint system in an accident How the restraint system works depends on the severity of the impact detected and the apparent type of accident: R Frontal impact R Rear impact R Side impact R Rollover The activation thresholds for the components of the restraint system are determined based on the evaluation of the sensor values measured at vari­ous points in the vehicle. This process is pre-emp­tive in nature. The restraint system components must be triggered/deployed in good time at the start of the collision. Factors that can only be seen or measured after a collision has occurred cannot play a decisive role in air bag deployment. Nor do they provide an indication of air bag deployment. The vehicle may be deformed significantly without an air bag being deployed. This is the case if only parts that are relatively easily deformed are affec­ted and the rate of vehicle deceleration is not high. Conversely, an air bag may have been deployed even though the vehicle has suffered only minor deformation. If very rigid vehicle parts such as longitudinal members are hit, for exam­ple, this may result in sufficiently high levels of vehicle deceleration. Depending on the detected deployment situation, the components of the restraint system can be activated or deployed independently of one another: R Emergency Tensioning Device: frontal impact, rear impact, side impact, rollover R Driver's air bag, front passenger air bag: fron­ tal impact R Knee air bag: frontal impact R Side air bag: side impact R Window air bag: side impact, rollover, frontal impact R PRE-SAFE® Impulse Side: side impact The front passenger air bag can only be deployed in an accident if the PASSENGER AIR BAG OFF indicator lamp is off. If the front passenger seat is occupied, make sure, both before and during the journey, that the status of the front passenger air bag is correct (/ page 53). & WARNING Risk of burns from hot air bag components The air bag parts are hot after an air bag has been deployed. # Do not touch the air bag parts. # Have a deployed air bag replaced at a qualified specialist workshop as soon as possible. Mercedes-Benz recommends that you have the vehicle towed to a qualified specialist workshop after an accident. Take this into account espe­cially if a Emergency Tensioning Device was trig­gered or an air bag was deployed. If the Emergency Tensioning Devices are triggered or an air bag is deployed, you will hear a bang, and a small amount of powder may also be released: R The bang will not generally affect your hearing. R In general, the powder released is not hazard­ ous to health but may cause short-term breathing difficulties to persons suffering from asthma or other pulmonary conditions. Provided it is safe to do so, leave the vehicle immediately or open the window in order to prevent breathing difficulties. Air bags and pyrotechnic Emergency Tensioning Devices contain perchlorate material, which may require special handling or environmental protec­tion measures. National guidelines regarding waste disposal must be observed. In California, see the https://dtsc.ca.gov/. Using the search function, you will find information on perchlorate, for example. Protection provided by the seat belt Always fasten your seat belt correctly before starting a journey. A seat belt can provide the best level of protection only if it is worn correctly. & WARNING Risk of injury or death due to incorrectly fastened seat belt If the seat belt is not worn correctly, it cannot perform its intended protective function. In addition, an incorrectly fastened seat belt can also cause injuries, for example, in the event of an accident or when braking or changing direction suddenly. # Always ensure that all vehicle occupants have their seat belts fastened correctly and are sitting properly. Always observe the instructions about the correct driver's seat position and adjusting the seat (/ page 103). In order for the correctly worn seat belt to provide the intended level of protection, each vehicle occupant must observe the following information: R The seat belt must not be twisted and must fit tightly and snugly across the body. R The seat belt must be routed across the cen­ter of the shoulder and as low down across the hips as possible. R The shoulder section of the seat belt should not touch your neck nor be routed under your arm or behind your back. R Avoid wearing bulky clothing, e.g. a winter coat. R Push the lap belt down as far as possible across your hips and pull tight with the shoul­der section of the belt. Never route the lap belt across your abdomen. Pregnant women must also take particular care with this. R Never route the seat belt across sharp, poin­ted, abrasive or fragile objects. R Only one person should use each seat belt at any one time. R Never secure objects with a seat belt if the seat belt is also being used by one of the vehi­cle's occupants. Also ensure that no objects, e.g. a cushion, are ever placed between a person and the seat. The seat belts on the following seats are equipped with a special seat belt retractor: R Front passenger seat R Rear passenger compartment seats Activate or deactivate the special seat belt retrac­ tor of the seat belt (/ page 62). If children are traveling in the vehicle, be sure to observe the instructions and safety notes on "Children in the vehicle" (/ page 58). Always observe the instructions for loading the vehicle when securing objects, luggage or loads (/ page 119). Limitations of the protection provided by the seat belt & WARNING Risk of injury or death due to an incorrect seat position The seat belt does not offer the intended level of protection if you have not moved the seat backrest to an almost vertical position. In particular, you could slip beneath the seat­belt and become injured. # Adjust the seat properly before begin­ning your journey. # Always ensure that the seat backrest is in an almost vertical position and that the shoulder belt is routed across the center of your shoulder. & WARNING Risk of injury or death when additional restraint systems are not used for persons with a smaller stature Persons under 5 ft (1.50 m ) tall cannot wear the seat belt correctly without a suitable addi­tional restraint system. # Always secure persons under 5 ft (1.50 m) tall in a suitable restraint sys­tem. & WARNING Danger of injury or death due to blocked seat belt anchorage The restraint effect of the seat belt is impaired if objects between the front seat and the door are blocking the movable seat belt anchorage on the front seat. # Before starting a journey, make sure that there are no objects between the front seat and the door. & WARNING Risk of injury or death due to damaged or modified seat belts Seat belts cannot provide protection in the fol­lowing situations: R The seat belt is damaged, has been modi­fied, is extremely dirty, bleached or dyed R The seat belt buckle is damaged or extremely dirty R Modifications have been made to the Emergency Tensioning Device, seat belt anchorage or seat belt retractor Seat belts may sustain non-visible damage in an accident, e.g. due to glass splinters. Modified or damaged seat belts could tear or fail in the event of an accident, for example. Modified Emergency Tensioning Devices could accidentally trigger or fail to function as inten­ded. # Never modify the seat belt system, for example the seat belt, seat belt buckle, Emergency Tensioning Device, seat belt anchorage and seat belt retractor. # Make sure that the seat belts are undam­aged, not worn and clean. # Always have the seat belts checked immediately after an accident at a quali­fied specialist workshop. Only use seat belts which have been approved for your vehicle by Mercedes-Benz. & WARNING Risk of injury or death from deployed pyrotechnic Emergency Tension­ing Devices Pyrotechnic Emergency Tensioning Devices that have been deployed are no longer opera­tional and are unable to perform their inten­ded protective function. # Therefore, have deployed pyrotechnic Emergency Tensioning Devices immedi­ately replaced at a qualified specialist workshop. Mercedes-Benz recommends that you have the vehicle towed to a qualified specialist workshop after an accident. * NOTE Damage caused by trapping the seat belt If an unused seat belt is not fully retracted, it may become trapped in the door or in the seat mechanism. # Always ensure that an unused seat belt is fully retracted. Fastening and adjusting seat belts If the seat belt is pulled quickly or sharply, the seat belt retractor locks. The seat belt strap can­not be pulled out any further. # Always engage seat belt tongue 1 of the seat belt into seat belt buckle 2 of the corre­sponding seat. # To adjust the seat belt height: press button 3 on the seat belt outlet and slide the seat belt outlet to the desired position. # To engage the seat belt outlet: release button 3 and ensure that the seat belt outlet engages. % A seat belt can only provide the best level of protection if it is worn correctly. Observe the notes on fastening the seat belt (/ page 44). * NOTE Deployment of components of the restraint system when the front passenger seat is unoccupied and a seat belt is buckled When the front passenger seat is unoccupied and the seat belt tongue of the seat belt is engaged in the seat belt buckle, components of the restraint system may deploy unnecessa­rily on the front passenger side, e.g. the Emer­gency Tensioning Device. # Only buckle the seat belts as intended. % Observe the notes on stowage areas (/ page 119). Information on installing a child restraint sys­tem and on children traveling in the vehicle can be found in the "Children in the vehicle" section (/ page 61). Seat belt adjustment function Vehicles with PRE-SAFE®: after a front seat belt has been fastened, the automatic seat belt adjust­ment may apply a certain amount of tightening force. Do not hold the seat belt tightly while it is adjusting. You can activate and deactivate the seat belt adjustment function using the multimedia system (/ page 48). Activating/deactivating seat belt adjustment via the multimedia system Multimedia system: 4 © 5 Settings 5 Vehicle 5 Occupant Protection # Activate or deactivate Belt adjustment. Releasing seat belts # Press the release button in the seat belt buckle and guide the seat belt back with the seat belt tongue. Seat belt warning function for the driver and front passenger The ü seat belt warning lamp on the driver's display is a reminder that all vehicle occupants must wear their seat belts correctly. The ü seat belt warning lamp will light up for six seconds every time the vehicle is started. In addition, a warning tone may sound. When the driver's and front passenger's doors are closed and the driver and front passenger have fastened their seat belts, the seat belt warning will go out. In the following cases, the seat belt warning will light up during a journey if: R The vehicle speed exceeds 15 mph (25 km/h) and the driver's or front passenger seat belt is not fastened. R The driver or front passenger unfastens his or her seat belt while the vehicle is in motion. Overview of air bags 1 Driver's knee air bag 2 Driver's air bag 3 Front passenger air bag 4 Front passenger knee air bag 5 Window air bag 6 Side air bag The installation location of an air bag is identified by the AIRBAG symbol. An additional arrow sym­bol M indicates the installation location for cer­tain air bags. When enabled, an air bag can provide additional protection for the respective vehicle occupant. Potential protection provided by each air bag: R Knee air bag: thigh, knee and lower leg R Driver's air bag, front passenger air bag: head and thorax R Side air bag: thorax, also pelvis for front seat occupants R Window air bag: head Information on child restraint systems on the front passenger seat & WARNING Risk of injury or fatal injuries if the front passenger air bag is enabled If the front passenger air bag is enabled, a child on the front passenger seat may be struck by the front passenger air bag in the event of an accident. # NEVER use a rearward-facing child restraint system on a seat with an ENA­BLED FRONT AIR BAG. This can result in the DEATH of or SERIOUS INJURY to the CHILD. When installing a child restraint system on the front passenger seat, observe the vehicle-specific information (/ page 68). Also, always observe the notes on rearward-facing or forward-facing child restraint systems on the front passenger seat (/ page 67). Information on automatic front passenger air bag actuation Only when the PASSENGER AIR BAG OFF indica­tor lamp is off can the front passenger air bag deploy in the event of an accident. If the front passenger seat is occupied, make sure, both before and during the journey, that the status of the front passenger air bag is correct (/ page 53). * NOTE Deployment of components of the restraint system when the front passenger seat is unoccupied In an accident, the components of the restraint system may deploy unnecessarily on the front passenger side if: R There are heavy objects on the front passenger seat. R The seat belt tongue is engaged in the seat belt buckle of the front passenger seat and the front passenger seat is unoccupied. # Store objects in a suitable place. # Only one person should use each seat belt at any one time. Depending on the detected accident situation, the window air bag on the front passenger side may deploy. The air bag is deployed regardless of whether the front passenger seat is occupied. Protection provided by the airbags Depending on the accident situation, an airbag may supplement the protection offered by a cor­rectly fastened seat belt. & WARNING Risk of injury or death due to an incorrect seat position If you deviate from the correct seat position, the airbag cannot perform its intended protec­tive function. Each vehicle occupant must make sure of the following: R Fasten seat belts correctly. Pregnant women must take particular care to ensure that the lap belt never lies across the abdomen. R Adopt the correct seat position and keep as far away as possible from the airbags. R Observe the following information. # Always make sure that there are no objects between the airbag and vehicle occupant. To avoid the risks resulting from the deployment of an airbag, each vehicle occupant must observe the following information in particular: R Before starting your journey, adjust your seat correctly; the driver's seat and front passenger seat should be moved as far back as possible. When doing so, always observe the informa­tion on the correct driver's seat position (/ page 103). R Only hold the steering wheel by the steering wheel rim. This allows the airbag to be fully deployed. R Always lean against the seat backrest when the vehicle is in motion. Do not lean forwards or against the door or side window. You may otherwise be in the deployment area of the airbags. R The occupants must always keep their feet on the floor. Do not put your feet on the cockpit, for example. Your feet may otherwise be in the deployment area of the airbag. R If children are traveling in the vehicle, observe the additional notes (/ page 58). R Always stow and secure objects correctly. Objects in the vehicle interior may prevent an air­bag from functioning correctly. Each vehicle occu­pant must always make sure of the following in particular: R There are no people, animals or objects between the vehicle occupants and an airbag. R There are no objects between the seat, door and door pillar (B-pillar). R There are no hard objects, e.g. coat hangers, hanging on the grab handles or coat hooks. R There are no accessories, such as mobile navi­gation devices, mobile phones or cup holders, within the deployment area of an airbag, e.g. on the cockpit, on the door, on the side win­dow or on the side trim. In addition, no connecting cables, tensioning straps or retaining straps must be routed or attached to the vehicle within the deployment area of an airbag. Always comply with the accessory manufacturer's installation instruc­tions and, in particular, the notes on suitable places for installation. R There are no heavy, sharp-edged or fragile objects in the pockets of your clothing. Store such objects in a suitable place. Limitations of the protection provided by airbags & WARNING Risk of injury due to modifica­tions to the cover of an airbag If you change the cover of an airbag or attach objects, e.g. even stickers, to it, the airbag may no longer function as intended. # Never modify the cover of an airbag. # Do not attach any objects to the cover. The installation location of an airbag is identified by the AIRBAG symbol (/ page 48). Objects in the deployment area of an airbag may prevent the airbag from functioning correctly. & WARNING Risk of injury from objects in the deployment area of an airbag Objects in the deployment area of an airbag can hinder or prevent the correct deployment of the airbag. The airbag may then deploy in an uncontrolled manner and may even cause additional inju­ries to the vehicle occupants by deploying. This may be the case in particular if the airbag is integrated into the seat. # Always stow and secure objects cor­rectly. # Before commencing your journey, make sure that no objects are stowed in the deployment area of an airbag. & WARNING Risk of injury or death due to the use of unsuitable seat covers Due to unsuitable seat covers, the airbags cannot protect vehicle occupants as intended. In addition, the operation of the automatic front passenger airbag shutoff could be restricted. # You should only use seat covers that have been approved for the correspond­ing seats by Mercedes-Benz. & WARNING Risk of injury due to malfunc­tioning sensors in the door The function of the airbags can be impaired due to modifications or incorrect work per­formed on the doors or door trim, or if the doors are damaged. # Never modify the doors or parts of the doors. # Always have work on the doors or door trim carried out at a qualified specialist workshop. & WARNING Risk of injury due to deployed airbag A deployed airbag no longer offers any protec­tion. # Have the vehicle towed to a qualified specialist workshop in order to have the deployed airbag replaced. Have deployed airbags replaced immediately. Status of the front passenger front airbag ¦Function of the automatic front passenger air bag shutoff The automatic front passenger air bag shutoff is able to detect whether the front passenger seat is occupied by a person or a child restraint system. The front passenger air bag and front passenger knee bag are enabled or disabled accordingly. & WARNING Risk of injury or death due to objects under the co-driver seat Objects trapped under the co-driver seat can interfere with the function of the automatic co-driver airbag shutoff or damage the system. # Do not store any objects under the co-driver seat. # When the co-driver seat is occupied, make sure that no objects are trapped under the co-driver seat. When fitting a child restraint system to the front passenger seat, observe the vehicle-specific infor­mation (/ page 68). Also, always observe the notes on rearward-facing or forward-facing child restraint systems on the front passenger seat (/ page 67). A person on the front passenger seat must observe the following information: R Fasten seat belts correctly (/ page 44). R Sit in an almost upright seat position with their back against the seat backrest. R Sit with their feet resting on the floor, if possi­ble. The front passenger air bag may otherwise be dis­abled by mistake, for example, in the following sit­uations: R The front passenger transfers their weight by supporting themselves on a vehicle armrest. R The front passenger sits in such a way that their weight is raised from the seat surface. & WARNING Risk of injury or death due to a disabled front passenger airbag The front passenger airbag is disabled when the PASSENGER AIR BAG OFF indicator lamp is lit. A person in the front passenger seat could then, for example, come into contact with the vehicle interior, especially if the person is sit­ting too close to the cockpit. If the front passenger seat is occupied, always ensure that: R The classification of the person in the front passenger seat is correct and the front passenger airbag is enabled or disabled in accordance with the person in the front passenger seat. R The front passenger seat has been moved as far back as possible. R The person is seated correctly. # Both before and during the journey, ensure that the status of the front passenger airbag is correct. If the front passenger seat is occupied, the classi­fication of the person or child restraint system on the front passenger seat takes place after the front passenger air bag shutoff self-test. The PASSENGER AIR BAG indicator lamps display the status of the front passenger air bag. Always observe the notes on the function of the PASSENGER AIR BAG indicator lamps (/ page 53). ¦Function of the PASSENGER AIR BAG indicator lamps Self-test of automatic front passenger air bagshutoffWhen the vehicle is switched on, a self-test is per-formed during which the two PASSENGER AIRBAG ON and OFF indicator lamps light up simulta-neously.The status of the front passenger air bag is dis­played via the PASSENGER AIR BAG indicator lamps after the self-test: R ON is lit: the front passenger air bag may deploy during an accident. The indicator lamp goes out after 60 seconds. R ON and OFF are not lit: the front passenger air bag may deploy during an accident. R OFF is lit: the front passenger air bag is disa­ bled. It will then not be deployed in the event of an accident. If the PASSENGER AIR BAG ON indicator lamp is off, only the PASSENGER AIR BAG OFF indicator lamp shows the status of the front passenger air bag. The PASSENGER AIR BAG OFF indicator lamp may be lit continuously or be off. If the PASSENGER AIR BAG OFF indicator lamp and the 6 restraint system warning lamp light up simultaneously, the front passenger seat may not be used. Also in this case, do not fit a child restraint system to the front passenger seat. Have the automatic front passenger air bag shutoff Status display If the front passenger seat is occupied, ensure, both before and during the journey, that the sta­tus of the front passenger air bag is correct for the current situation. After fitting a rearward-facing child restraint sys­tem to the front passenger seat: PASSENGER AIR BAG OFF must be lit continuously. & WARNING Risk of injury or fatal injury when using a rearward-facing child restraint system while the co-driver airbag is enabled If you secure a child in a rearward-facing child restraint system on the co-driver seat and the PASSENGER AIR BAG OFF indicator lamp is off, the co-driver airbag can deploy in the event of an accident. The child could be struck by the airbag. # Always ensure that the co-driver airbag is disabled. The PASSENGER AIR BAG OFF indicator lamp must be lit. # NEVER use a rearward-facing child restraint system on a seat with an ENA­BLED FRONT AIRBAG; DEATH or SERI­OUS INJURY to the CHILD can occur. When fitting a child restraint system to the front passenger seat, observe the vehicle-specific infor­mation (/ page 67). Depending on the child restraint system and the stature of the child, the PASSENGER AIR BAG OFF indicator lamp may be off. In this case, do not fit the rearward-facing child restraint system to the front passenger seat. Instead, fit the rearward-facing child restraint sys­tem to a suitable rear passenger compartment seat. After fitting a forward-facing child restraint sys­tem to the front passenger seat: depending on the child restraint system and the stature of the child, PASSENGER AIR BAG OFF may be lit continuously or be off. Always observe the following informa­tion. & WARNING Risk of injury or death due to incorrect positioning of the forward-facing child restraint system If you secure a child in a forward-facing child restraint system on the front passenger seat that is positioned too close to the cockpit, in the event of an accident, the child could: R come into contact with the vehicle interior if the PASSENGER AIR BAG OFF indicator lamp is lit, for example R be struck by the airbag if the PASSENGER AIR BAG OFF indicator lamp is off. # Always move the front passenger seat as far back as possible and fully retract the seat cushion length adjustment. While doing so, always make sure that the shoulder belt strap is correctly routed from the seat belt outlet of the vehicle to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed forwards and downwards from the seat belt outlet. If necessary, adjust the seat belt outlet and the front passenger seat accordingly. # Always comply with the child restraint system manufacturer's installation instructions. When fitting a child restraint system to the front passenger seat, observe the vehicle-specific infor­mation (/ page 67). If a person is sitting on the front passenger seat: PASSENGER AIR BAG OFF may be lit continuously or be off, depending on the person's stature. A person on the front passenger seat must always observe the following information: R If the front passenger seat is occupied by an adult or a person with a stature corresponding to that of an adult, the PASSENGER AIR BAG OFF indicator lamp must be off. This indicates that the front passenger air bag is enabled. If the PASSENGER AIR BAG OFF indicator lamp is lit continuously, an adult or person with a build corresponding to that of an adult must not use the front passenger seat. Instead, they should use a rear passenger compartment seat. R If the front passenger seat is occupied by a person of smaller stature (e.g. a teenager or small adult), the PASSENGER AIR BAG OFF indicator lamp is either lit continuously or remains off, depending on the classification. -If the PASSENGER AIR BAG OFF indicator lamp is off: move the front passenger seat as far back as possible, or the person of smaller stature should use a rear passenger compartment seat. -If the PASSENGER AIR BAG OFF indicator lamp is lit continuously: the person of smaller stature should not use the front passenger seat. & WARNING Risk of injury or death when the PASSENGER AIR BAG OFF indicator lamp is lit If the PASSENGER AIR BAG OFF indicator lamp remains lit after the self-test, the front passenger airbag is disabled. If the front passenger seat is occupied, always ensure that: R The classification of the person in the front passenger seat is correct and the front passenger airbag is enabled or disabled in accordance with the person in the front passenger seat. R The person is seated properly with a cor­rectly fastened seat belt. R The front passenger seat has been moved as far back as possible. Be sure to also observe the following further rela­ ted subjects: R Child restraint system on the front passenger seat (/ page 67) Function of PRE-SAFE® (anticipatory occupant protection) PRE-SAFE® is able to detect certain critical driv­ing situations and implement pre-emptive meas­ures to protect the vehicle occupants. PRE-SAFE® can implement the following meas­ures independently of each other: R Tightening the seat belts on the driver's seat and front passenger seat. R Closing the side windows. R Vehicles with sliding sunroof: closing the slid­ing sunroof. R Vehicles with memory function: moving the front passenger seat to a more favorable seat position. R Vehicles with multicontour seat: increasing the air pressure in the seat side bolsters of the seat backrest. R PRE-SAFE® Sound: provided that the multime­dia system is switched on, generating a brief noise signal to stimulate the innate protective mechanism of a person's hearing. * NOTE Damage caused by objects in the footwell or behind the seat The automatic adjustment of the seat position may result in damage to the seat and/or the object. # Stow objects in a suitable place. Backing up the PRE-SAFE® system measures If an accident did not occur, the pre-emptive measures that were taken are reversed. You will need to perform certain settings yourself. # If the seat belt pre-tensioning is not reduced, move the seat backrest back slightly. The locking mechanism releases. Function of PRE-SAFE® PLUS (anticipatory occu­ pant protection plus) PRE-SAFE® PLUS can detect certain impacts, par­ticularly an imminent rear impact, and take pre­emptive measures to protect the vehicle occu­pants. These measures cannot necessarily pre­vent an imminent impact. PRE-SAFE® PLUS can implement the following measures independently of each other: R Tightening the seat belts on the driver's seat and front passenger seat. R Increasing brake pressure when the vehicle is stationary. This brake application is canceled automatically when the vehicle pulls away. If an accident did not occur, the pre-emptive measures that were taken are reversed. System limits The system will not initiate any action in the fol­lowing situations: R When backing up The system will not initiate any braking application in the following situations: R Whilst driving or R When entering or exiting a parking space while using Active Parking Assist Function of PRE-SAFE® Impulse Side If an imminent side impact is detected, PRE­SAFE® Impulse Side can pre-emptively move the front seat vehicle occupant's upper body towards the center of the vehicle. It does this by rapidly inflating an air cushion in the outer seat side bol­ster of the seat backrest on the side on which the impact is anticipated. This increases the distance between the door and the vehicle occupant. If PRE-SAFE® Impulse Side has been deployed or is faulty, the PRE-SAFE Pulse Side Inoperative See Operator's Manual(/ page 410) display message appears. Depending on the type and severity of the acci­dent, and depending on the vehicle's equipment, the following measures can be implemented, for example: R Automatic braking (post-collision brake) R Activating the hazard warning light system R Triggering an automatic emergency call (/ page 337) R Switching off the drive system and high-volt­ age on-board electrical system R Unlocking the vehicle doors R Lowering the side windows R Displaying the emergency guide in the central display R Switching on the interior lighting Function of the post-collision brake Depending on the accident situation, the post-col­lision brake can minimize the severity of a further collision or even avoid it. If an accident is detected, the post-collision brake can implement automatic braking. When the vehi­cle has come to a standstill, the electric parking brake is automatically applied. The driver can cancel automatic braking by taking the following actions: R Braking more strongly than automatic braking R Fully depressing the accelerator pedal with force Always observe when children are traveling in the vehicle % Also strictly observe the safety notes for the specific situation. In this way, you can recog­nize potential risks and avoid dangers if chil­dren are traveling in the vehicle (/ page 58). Be diligent Bear in mind that negligence when securing a child in the child restraint system may have seri­ous consequences. Always be diligent in securing a child carefully before every journey. Never allow babies and children to travel sitting on the lap of another vehicle occupant. To improve protection for children younger than 12 years old or under 5 ft (1.50 m) in height, Mercedes-Benz recommends you observe the fol­lowing information: R Always secure the child in a child restraint sys­tem suitable for this Mercedes-Benz vehicle. R The child restraint system must be appropriate to the age, weight and size of the child. R The vehicle seat must be suitable for fitting a child restraint system. Accident statistics show that children secured on the rear passenger compartment seats are gener­ally safer than children secured on the front seats. For this reason, Mercedes-Benz strongly advises that you fit a child restraint system to a rear passenger compartment seat. The generic term child restraint system The generic term child restraint system is used in this Operator's Manual. A child restraint system is, for example: R a baby car seat R a rearward-facing child seat R a forward-facing child seat R a child booster seat with a backrest and seat belt guide Mercedes-Benz recommends using a child booster seat with a backrest. The child restraint system must be appropriate to the age, weight and size of the child. Observe laws and legal requirements Always observe the legal requirements when using a child restraint system in the vehicle. Observe standards for child restraint systems All child restraint systems must meet the following standards: R U.S. Federal Motor Vehicle Safety Standards 213 and 225 R Canadian Motor Vehicle Safety Standards 213 and 210.2 Confirmation that the child restraint system com­plies with the standards can be found on an instruction label on the child restraint system. This confirmation can also be found in the instal­lation instructions that are included with the child restraint system. Detecting risks, avoiding danger Securing systems for child restraint systems in the vehicle Use only the following securing systems for child restraint systems: R the ISOFIX securing rings R the vehicle's seat belt system R the Top Tether anchorages Fitting an ISOFIX child restraint system is prefer­ red. Simply attaching to the securing rings on the vehi­cle can reduce the risk of fitting the child restraint system incorrectly. When securing a child with the integrated seat belt of the ISOFIX child restraint system, always comply with the permissible gross weight for the child and child restraint system (/ page 63). A booster seat may be necessary to achieve proper seat belt positioning for children over 40 lbs (18 kg) in weight or until they reach a height where a three-point seat belt can be instal­led properly without a booster seat. Mercedes-Benz recommends a suitable child booster seat with a backrest and seat belt guide. Advantage of a rearward-facing child restraint sys­tem It is preferable to transport a baby or a small child in a suitable rearward-facing child restraint sys­tem. In this case, the child sits in the opposite direction to the direction of travel and faces back­wards. Babies and small children have comparatively weak neck muscles in relation to the size and weight of their head. The risk of injury to the cer­vical spine during an accident can be reduced in a rearward-facing child restraint system. Always secure a child restraint system correctly & WARNING Risk of injury or death due to incorrect installation of the child restraint system The child can then not be protected or restrained as intended. # Be sure to comply with the manufactur­er's installation instructions for the child restraint system and its correct use. # Make sure that the entire base of the child restraint system always rests on the sitting surface of the seat. # Never place objects (e.g. cushions) under or behind the child restraint sys­tem. # Use child restraint systems only with the original cover designed for them. # Always replace damaged covers with genuine covers. & WARNING Risk of injury or death due to unsecured child restraint systems in the vehicle If the child restraint system is incorrectly mounted or unsecured, it may come loose. The child can then not be protected or restrained as intended. Unused child restraint systems could be flung around and hit vehicle occupants. # Always comply with the manufacturer's installation instructions for the child restraint system and its correct use. # Always fit child restraint systems cor­rectly, even if they are transported in the vehicle unused. R Always observe the child restraint system manufacturer's installation and operating instructions as well as the vehicle-specific information: -Fitting the ISOFIX child restraint system on the right and left rear passenger compart­ment seats (/ page 63). -Securing the child restraint system with the seat belt on the rear passenger com­partment seat (/ page 66). -Securing the child restraint system with the seat belt on the front passenger seat (/ page 68). Observe the specific instructions for the rearward-facing and forward-facing child restraint systems (/ page 67). If the front passenger seat is occupied, ensure, both before and during the jour­ney, that the status of the front passenger air bag is correct for the current situation (/ page 53). R Observe the warning labels in the vehicle inte­rior and on the child restraint system. R Also secure Top Tether if present. Do not modify the child restraint system & WARNING Risk of injury due to modifica­tions to the child restraint system The child restraint system can no longer func­tion properly. This poses an increased risk of injury. # Never modify a child restraint system. # Only affix accessories which have been specially approved for this child restraint system by the child restraint system's manufacturer. Use only child restraint systems that are in proper working condition & WARNING Risk of injury or death caused by the use of damaged child restraint sys­tems Child restraint systems or their retaining sys­tems that have been subjected to stress in an accident may not be able to perform their intended protective function. It may be the case that the child cannot be properly restrained. # Always immediately replace child restraint systems that have been dam­aged or involved in an accident. # Have the securing systems for the child restraint systems checked at a qualified specialist workshop before installing a child restraint system again. Avoid direct sunlight & WARNING Risk of burns when the child seat is exposed to direct sunlight If the child restraint system is exposed to direct sunlight or heat, parts could heat up excessively. Children could suffer burns from these parts, particularly the metallic parts of the child restraint system. # Always make sure that the child restraint system is not exposed to direct sunlight. # Cover the child restraint system with a blanket, for example. # If the child restraint system has been exposed to direct sunlight, allow it to cool before securing a child into it. # Never leave children unattended in the vehicle. Observe when stopping or parking & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. & WARNING Risk of fatal injury due to expo­sure to extreme heat or cold in the vehicle If persons, particularly children, are subjected to prolonged exposure to intense heat or cold, there is a risk of severe injury or even death. # Never leave persons, particularly chil­dren, unattended in the vehicle. Overview of suitable seats in the vehicle for instal­ ling a child restraint system Left/right rear seat Preferred securing system: ® ISOFIX child seat anchor ¯ Also secure Top Tether if present (/ page 64). Alternative securing system: 7 Vehicle seat belt Front passenger seat Securing system: 7 Vehicle seat belt Please note: R If the front passenger seat is occupied, ensure, both before and during the journey, that the status of the front passenger air bag is correct for the current situation (/ page 53). R Notes on the automatic front passenger air bag deactivation system (/ page 52). Center rear seat Securing system: 7 Vehicle seat belt ¯ Also secure Top Tether if present (/ page 64). Activating or deactivating the special seat belt retractor of the seat belt & WARNING Risk of injury or death if a seat belt is unfastened while the vehicle is in motion If the seat belt is released while the vehicle is in motion, the special seat belt retractor is deactivated and the child restraint system is no longer correctly secured. The seat belt is drawn in slightly by the inertia reel and cannot be immediately closed again. # Stop the vehicle immediately in accord­ance with the traffic conditions. # Activate the special seat belt retractor again and correctly secure the child restraint system. When enabled, the special seat belt retractor ensures that the seat belts of the front passenger seat and rear seats do not slacken once the child restraint system is secured. The seat belts on the following seats are equipped with a special seat belt retractor: R Front passenger seat R Rear passenger compartment seats Installing a child restraint system # When installing a child restraint system, always observe the manufacturer's installation and operating instructions as well as the infor­mation in this Operator's Manual. # Pull the seat belt smoothly from the seat belt outlet. # Engage the seat belt tongue in the seat belt buckle. Activating the special seat belt retractor # Pull the seat belt out fully and let the inertia reel retract it again. When the special seat belt retractor is activa­ted, you will hear a ratcheting sound. # Push the child restraint system down until the seat belt sits tightly. Deactivating the special seat belt retractor # Press the release button of the seat belt buckle. # Hold the seat belt tongue and guide back to the seat belt outlet. Installing a LATCH-type (ISOFIX) child restraint system on the left and right rear seats ¦Installing a LATCH-type (ISOFIX) child restraint system on the left and right rear seats & WARNING Risk of accident if the rear bench seat, rear seat and seat backrest are not engaged The rear bench seat, rear seat and seat back­rest may fold forwards, even when you are driving. R As a result, the vehicle occupant will be pushed into the seat belt with increased force. The seat belt will not be able to pro­tect as intended and could cause addi­tional injury. R Objects or loads in the trunk or cargo compartment will not be restrained by the seat backrest. # Make sure that the rear bench seat, the rear seat and the seat backrest are engaged before every trip. If the rear seat backrest is not engaged and locked in place, the red lock verification indicator will be visible. & WARNING Risk of injury or death if the permissible gross mass of the child and child restraint system together is excee­ded. Too much load may be placed on the LATCH-type (ISOFIX) or iSize child restraint systems and the child may not be restrained correctly in the event of an accident, for example. # If the child is secured in a LATCH-type (ISOFIX) child restraint system with inte­grated seat belt, the total mass of the child and child restraint system must not exceed 73 lb (33 kg). Always comply with the information about the mass of the child: R In the manufacturer's installation and operat­ing instructions for the child restraint system used R On a label on the child restraint system, if present Regularly check that the permissible gross mass of the child and child restraint system is still com­plied with. When installing a child restraint system, observe the following: O Always observe the correct use of the seats and consider their suitability for attaching a child restraint system. O Always comply with the manufacturer's installation and operating instructions for the child restraint system used. O Make sure that the child's feet do not touch the front seat. If necessary, move the front seat slightly forwards. ® When installing a LATCH-type (ISOFIX) child restraint system, also observe the following: O When using a baby car seat in weight group 0/0+ and a rearward-facing child restraint system in weight group I on a rear seat: adjust the front seat so that the seat does not touch the child restraint system. O When using a forward-facing child restraint system in weight group I: remove the head restraint from the respective seat, if possible. In addition, the backrest of the child restraint system must lie as flat as possible against the backrest of the vehicle seat. After the child restraint system has been removed, replace the head restraint immedi­ately and adjust all head restraints correctly. O If the head restraint of the child seat cannot be fully extended when it is installed in the vehicle; this will result in restrictions on the maximum size setting for child restraint sys­tems in weight group II or III. Contact with the roof when the head restraint is fully extended and locked in place will not result in any restrictions on use. O The child restraint system must not be put under strain between the roof and the seat cushion and/or be installed facing in the wrong direction. Where possible, adjust the seat cushion inclination accordingly. O The child restraint system must not be put under strain by the head restraint. Adjust the head restraints as appropriate. 1LATCH-type (ISOFIX) mounting bracket#Before every journey, make sure that theLATCH-type (ISOFIX) child restraint system iscorrectly engaged in both mounting bracketsin the vehicle.* NOTE Damage to the seat belt for the cen­ter seat during installation of the child restraint system # Make sure that the seat belt is not trap­ped. # Remove and stow away covers 1. # Attach the LATCH-type (ISOFIX) child restraint system to both mounting brackets in the vehi­cle. # After removing the child seat, reattach covers 1. Fastening a Top Tether & WARNING Risk of injury or death if the rear seat backrests are not locked after Top Tether belts are installed The rear seat backrests may fold forwards when you are driving. As a result, child restraint systems will no lon­ger be able to perform their intended protec­ tive function. This may also cause additional injuries. # Always lock rear seat backrests after installing Top Tether belts. # Observe the lock verification indicator. If the rear seat backrest is not engaged and locked in place, the red lock verification indicator will be visible. ¯ If the child restraint system is equipped with a Top Tether belt: The risk of injury may be reduced by Top Tether. The Top Tether belt enables an additional connection between the child restraint system attached with LATCH-type (ISOFIX) (left and right rear seats) or the seat belt (all rear seats) and the vehicle. # If necessary, slide head restraint 1 upwards (/ page 110). # Fold up cover 2 of Top Tether anchorage 3. # Install the LATCH-type (ISOFIX) or belt-secured child restraint system with Top Tether. In doing so, comply with the child restraint system manufacturer's installation instruc­tions. # Guide Top Tether belt 4 under head restraint 1 between the two head restraint bars. # Hook Top Tether hook 5 of Top Tether belt 4 into Top Tether anchorage 3 without twisting. # Tension Top Tether belt 4. In doing so, com­ply with the child restraint system manufactur­er's installation instructions. # Fold down cover 2 of Top Tether anchorage 3. # If necessary, slide head restraint 1 down­wards (/ page 110). Make sure that you do not interfere with the correct routing of Top Tether belt 4. Securing the child restraint system with the seat belt ¦Securing a child restraint system on the rear seat with the seat belt & WARNING Risk of accident if the rear bench seat, rear seat and seat backrest are not engaged The rear bench seat, rear seat and seat back­rest may fold forwards, even when you are driving. R As a result, the vehicle occupant will be pushed into the seat belt with increased force. The seat belt will not be able to pro­tect as intended and could cause addi­tional injury. R Objects or loads in the trunk or cargo compartment will not be restrained by the seat backrest. # Make sure that the rear bench seat, the rear seat and the seat backrest are engaged before every trip. If the seat backrest in the rear passenger com­partment is not engaged and locked in place, the red lock verification indicator will be visible. When installing a belt-secured child restraint sys­tem, observe the following: O Always comply with the manufacturer's installation and operating instructions for the child restraint system used. O Also secure Top Tether if present (/ page 64). O When using a baby car seat in weight group 0/0+ and a rearward-facing child restraint system in weight group 1 on a rear seat: adjust the front seat so that the seat does not touch the child restraint system. O When using a forward-facing child restraint system in weight group 1 : remove the head restraint from the respective seat, if possible. After the child restraint system has been removed, replace the head restraint immedi­ately and adjust all head restraints correctly. O The backrest of a forward-facing child restraint system must, as far as possible, be resting on the seat backrest of the rear seat. O If the head restraint of the child seat cannot be fully extended when it is installed in the vehicle, this will result in restrictions on the maximum size setting for child restraint sys­tems in weight group 2 or 3. Contact with the roof when the head restraint is fully extended and locked in place will not result in any restrictions on use. O The child restraint system must not be put under strain between the roof and the seat cushion and/or be installed facing the wrong direction. Where possible, adjust the seat cushion inclination accordingly. O The child restraint system must not be put under strain by the head restraint. Adjust the head restraints as appropriate. O Make sure that the child's feet do not touch the front seat. If necessary, move the front seat slightly forwards. The seat belts on the following seats are equipped with a child seat safety feature: R Front passenger seat R Rear seats When enabled, the child seat safety feature ensures that the seat belts of the front passenger seat and rear seats do not slacken once the child restraint system is secured (/ page 62). # Install the child restraint system. The entire base of the child restraint system must always rest on the seat surface of the rear seat. # Always make sure that the shoulder belt strap is correctly routed from the seat belt outlet of the vehicle to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed forward from the seat belt outlet. ¦Notes on rearward-facing and forward-facing child restraint systems on the front passenger seat & WARNING Risk of injury or fatal injury when using a rearward-facing child restraint system while the co-driver airbag is enabled If you secure a child in a rearward-facing child restraint system on the co-driver seat and the PASSENGER AIR BAG OFF indicator lamp is off, the co-driver airbag can deploy in the event of an accident. The child could be struck by the airbag. # Always ensure that the co-driver airbag is disabled. The PASSENGER AIR BAG OFF indicator lamp must be lit. # NEVER use a rearward-facing child restraint system on a seat with an ENA­BLED FRONT AIRBAG; DEATH or SERI­OUS INJURY to the CHILD can occur. Observe the specific instructions for the rear­ward-facing and forward-facing child restraint sys­tems (/ page 68). Always observe the status of the front passenger air bag on the PASSENGER AIR BAG OFF indicator lamp: R When using a rearward-facing child restraint system on the front passenger seat, the front passenger air bag must always be deactivated. This is the case only if the PASSENGER AIR BAG OFF indicator lamp is lit continuously (/ page 53). R If the PASSENGER AIR BAG OFF indicator lamp is off, the front passenger air bag is acti­vated. The front passenger air bag may deploy during an accident. ¦Securing the child restraint system with the seat belt on the front passenger seat When installing a belt-secured child restraint sys­tem on the front passenger seat, always observe the following: O Observe the notes on rearward-facing and forward-facing child restraint systems on the front passenger seat (/ page 67). O Observe the child restraint system manufac­turer's installation and operating instructions. O When using a forward-facing child restraint system in weight group 1: remove the head restraint from the respective seat, if possible. After the child restraint system has been removed, replace the head restraint immedi­ately and adjust all head restraints correctly. O The backrest of the forward-facing child restraint system must, as far as possible, be resting on the seat backrest of the front passenger seat. O If the head restraint of the child seat cannot be fully extended when it is installed in the vehicle, this will result in restrictions on the maximum size setting for child restraint sys­ tems in weight group 2 or 3. Contact with the roof when the head restraint is fully extended and locked in place will not result in any restrictions on use. O The child restraint system must not be put under strain between the roof and the seat cushion and/or be installed facing the wrong direction. O The child restraint system must not be put under strain by the head restraint. Adjust the head restraints as appropriate. O Never place objects (e.g. cushions) under or behind the child restraint system. The seat belt on the front passenger side is equip­ ped with a child seat safety feature. When enabled, the child seat safety feature ensures that the seat belt does not slacken once the child seat is secured (/ page 62). & WARNING Risk of injury or death due to objects between the seat surface and the child restraint system Objects between the seat surface and the child restraint system could affect the function of the automatic front passenger airbag shut­ off. # Do not place any objects between the seat surface and the child restraint sys­tem. # Always make sure that the child restraint system is correctly installed. # Set the front passenger seat as far back as possible and move the seat into the highest position if possible. # Fully retract the seat cushion length adjust­ment. # Adjust the seat cushion inclination such that the front edge of the seat cushion is in the highest position and the rear edge of the seat cushion is in the lowest position. # Set the seat backrest to the most vertical position possible. # Install the child restraint system. The entire base of the child restraint system must always rest on the seat surface of the front passenger seat. # Always make sure that the shoulder belt strap is correctly routed from the seat belt outlet of the vehicle to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed for­wards and downwards from the seat belt out­let. # If necessary, adjust the seat belt outlet and the front passenger seat accordingly. Child-proof locks ¦Activating/deactivating the child safety lock for the rear passenger compartment doors & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. & WARNING Risk of fatal injury due to expo­sure to extreme heat or cold in the vehicle If persons, particularly children, are subjected to prolonged exposure to intense heat or cold, there is a risk of severe injury or even death. # Never leave persons, particularly chil­dren, unattended in the vehicle. & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are traveling in the vehicle, they could, in particular: R Open doors, thereby endangering other persons or road users. R Get out and be struck by oncoming traffic. R Operate vehicle equipment and become trapped, for example. # Always activate the installed child safety locks if children are traveling in the vehi­cle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. There are child safety locks for the rear passenger compartment doors and the rear passenger com­partment side windows. The child safety lock on the rear passenger com­partment doors secures each door separately. The doors can no longer be opened from the inside. ¦Activating and deactivating the child safety lock for the rear passenger compartment side windows # Push the lever in direction 1 (activate) or 2 (deactivate). # Make sure that the child safety locks are work­ing properly. #To activate/deactivate: press button 2.The rear passenger compartment side windowcan be opened or closed in the followingcases:Rindicator lamp 1 is lit: via the switch onthe driver's doorR indicator lamp 1 is off: via the switch on the corresponding rear door or the driver's door & WARNING Risk of accident and injury due to animals left unsecured or unattended in the vehicle If you leave animals in the vehicle unattended or unsecured, they could possibly press but­tons or switches. An animal may: R Activate vehicle equipment and become trapped, for example R Switch systems on or off and endanger other road users Unsecured animals may be thrown around in the vehicle in the event of an accident or sud­den steering and braking maneuvers and injure vehicle occupants in the process. # Never leave animals in the vehicle unat­tended. # Always correctly secure animals while driving, e.g. using a suitable animal car­rier. Overview of SmartKey functions & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. * NOTE Damage to the SmartKey caused by magnetic fields # Keep the SmartKey away from strong magnetic fields. Vehicle key with panic alarm1Opens/closes the trunk lid2Unlocks (with embossed surface)3 Locks 4 Indicator lamp 5 Panic alarm % If indicator lamp 4 does not light up when the Üor s button is pressed, the bat­tery is weak or possibly discharged. Replace the battery as soon as possible. Replace the SmartKey battery (/ page 74). % Vehicles with convenience doors: if you have activated the convenience doors function in the multimedia system (/ page 84), you can open or close the driver's or front passenger door by pressing the Üor s button. Additional information on the conveni­ence doors (/ page 80). The SmartKey locks and unlocks the following components: R Doors R Socket flap R Trunk lid If the vehicle is not opened within approximately 40 seconds after unlocking, it will lock again. Anti-theft protection will be armed again. Do not keep the SmartKey together with elec­tronic devices or metallic objects. This can affect the SmartKey's functionality. Activating/deactivating the acoustic locking verifi­ cation signal Multimedia system: 4 © 5 Settings 5 Vehicle 5 Open/Close # Activate or deactivate the Acoustic Lock. Activating/deactivating the panic alarm Requirements: R The vehicle is switched off. # To activate: press button 1 for approximately one second. A visual and audible alarm is triggered. # To deactivate: briefly press button 1 again. or # Press the start/stop button. A SmartKey belonging to the vehicle must be detected in the vehicle. Changing the unlocking settings Possible unlocking functions of the SmartKey: R Central unlocking R Unlocking the driver's door and socket flap # To switch between settings: press the Ü and s buttons simultaneously for approx­imately six seconds until the indicator lamp flashes twice. Options when the unlocking function for the driv­er's door and socket flap has been selected: R To unlock the vehicle centrally: press the Ü button twice. R Vehicles with KEYLESS-GO: if you touch the inner surface of the door handle on the driv­er's door, only the driver's door and the socket flap will be unlocked. Deactivating the function of the key Vehicles with KEYLESS-GO: if you deactivate the function of the key, the KEYLESS-GO functions will also be deactivated. Access or drive authorization by KEYLESS-GO will then no longer be possible with that particular key. Activate the function of the key so that all its functions will again be avail­able. You can also deactivate the function of the key to reduce the energy consumption of the key if you do not use the vehicle or a key for an extended Removing/inserting the emergency key period of time. Removing the emergency key # To deactivate: press and hold the s key button. # With the s button pressed, immediately press the Ü key button twice in quick suc­cession. The indicator light on the key will light up once briefly and once for a long time. # To activate: press any button on the key. % When the vehicle is started with the key in the stowage compartment of the center console, the function of the key will be activated auto­matically (/ page 175). #Press release button 1.Emergency key 2 will be pushed out slightly.#Fully remove emergency key 2.Inserting the emergency key # Insert emergency key 2 at marking 3 until it engages. % You can use emergency key 2 to attach the SmartKey to a key ring. Replacing the SmartKey battery & DANGER Risk of fatal injuries due to swal­lowing batteries Batteries contain toxic and corrosive substan­ces. Swallowing batteries may cause severe internal burns to occur within two hours. There is a risk of fatal injury. # Keep batteries out of the reach of chil­dren. # If the cover and/or cap of the battery compartment does not close securely, do not use the SmartKey any longer and keep out of the reach of children. # If batteries are swallowed, seek medical attention immediately. + ENVIRONMENTAL NOTE Environmental damage due to improper disposal of bat­teries Batteries contain pollutants. It is illegal to dispose of them with the household rubbish. # Dispose of batteries in an environmentally responsible manner. Take discharged batteries to a qualified specialist workshop or to a collection point for used batteries. Requirements R You require a CR 2032 3 V cell battery. Mercedes-Benz recommends that you have the battery replaced at a qualified specialist work­shop. # Remove the emergency key (/ page 74). # Press emergency key 2 into the opening in the SmartKey in the direction of the arrow until cover 1 opens. When doing so, do not hold cover 1 closed. # Insert emergency key 2 into the opening and lift up cover 3 and remove it. # Repeatedly tap the SmartKey against the palm of your hand until battery 4 falls out of the key. # Insert the new battery with the positive pole facing upwards. Use a lint-free cloth to do so. # Make sure that the surface of the battery is free of lint, grease and other impurities. # Insert the front tabs of cover 3 into the housing first and then press on both sides to close it. # Make sure that cover 3 is completely closed. # Insert the front tabs of cover 1 into the housing first and then press until it is com­pletely closed. # Insert the emergency key again (/ page 74). Problems with the SmartKey, troubleshooting You can no longer lock or unlock the vehicle Possible causes: R The SmartKey battery is weak or discharged. # Check the battery using the indicator lamp (/ page 72). # Replace the SmartKey battery, if necessary (/ page 74). # Use the replacement key. # Use the emergency key to lock or unlock (/ page 85). # Have the SmartKey checked at a qualified spe­cialist workshop. Unlocking and opening doors from the inside There is interference from a powerful radio signal source Possible causes if the function of the SmartKey is impaired: R high voltage power lines R mobile phones R electronic devices (notebooks, tablets) R shielding due to metallic objects or induction loops for electrical gate systems or automatic barriers # Make sure that there is sufficient distance between the SmartKey and the potential source of interference. You have lost a SmartKey. # Have the SmartKey deactivated at a qualified specialist workshop. # If necessary, have the mechanical lock replaced as well. #To unlock and open a front door: pull doorhandle 1.#To unlock a rear door: pull the rear door han-dle.#To open a rear door: pull the rear door handleagain.Centrally locking and unlocking the vehicle from the inside # To unlock: press button 1. # To lock: press button 2. The red indicator lamp on button 2 will light up once the vehicle is locked. % The buttons are also located on the front passenger and rear doors. The socket flap is also locked and unlocked. The socket flap can be opened even if a SmartKey is detected in the car. The vehicle is not unlocked: R if you have locked the vehicle using the Smart-Key R if you have locked the vehicle using KEYLESS­GO Extending and retracting recessed door handles The door handles will extend automatically: R when you unlock the vehicle with the key R when you touch the outer sensor surface of the door handle (when the vehicle is unlocked) The door handles will retract automatically: R when you lock the vehicle with the key R when you pull away R after a waiting period # To extend the door handle: touch the outer 1 sensor surface. Locking/unlocking the vehicle with KEYLESS-GO Requirements: R The key is outside the vehicle. R The distance between the key and the vehicle does not exceed 3 ft (1 m). The door handles extend automatically: R when a vehicle key is detected (the vehicle is then not yet unlocked) R when you unlock the vehicle with the key R when you touch the outer sensor surface of the door handle to unlock it The door handles retract automatically: R when you lock the vehicle with the key R when you touch the recessed sensor surface of the door handle to lock it R after comfort locking (/ page 95) R when pulling away R after waiting for a time * NOTE Damage to the vehicle caused by unintentionally opening the trunk lid or a door R When using an automatic car wash R When using a high pressure cleaner # Deactivate the function of the SmartKey in these situations. or # Make sure that the SmartKey is at a min­imum distance of 10 ft (3 m) (power washer) or 20 ft (6 m) (automatic car wash) away from the vehicle. Observe the notes: R on washing the vehicle in a car wash (/ page 344) R on using a power washer(/ page 346) # Unlocking the vehicle: With the door handle extended, touch the inside surface 1 of the door handle. If the door handle is not extended, e. g. after a waiting period: # Touch the sensor surface 2 to unlock. # To lock the vehicle: touch recessed sensor surface 3. # Convenience closing: touch recessed sensor surface 3 for an extended period. % Further information on convenience closing (/ page 95). Problems with KEYLESS-GO, troubleshooting You can no longer lock or unlock the vehicle using KEYLESS-GO Possible causes: R The function of the SmartKey has been deacti­vated. R The SmartKey battery is weak or discharged. # Activate the function of the SmartKey (/ page 73). # Check the battery using the indicator lamp (/ page 72). # Replace the SmartKey battery, if necessary (/ page 74). # Use the replacement SmartKey. # Use the emergency key to lock or unlock (/ page 85). # Have the vehicle and SmartKey checked at a qualified specialist workshop. There is interference from a powerful radio signal source Possible causes if the function of KEYLESS-GO is impaired: R High voltage power lines R Mobile phones R Electronic devices (notebooks, tablets) R Shielding due to metal objects or induction loops for electrical gate systems or automatic barriers # Make sure that there is sufficient distance between the SmartKey and the potential source of interference. Activating or deactivating the automatic locking feature Multimedia system: 4 © 5 Settings 5 Vehicle 5 Open/Close % The vehicle will be locked automatically when the vehicle is switched on and the wheels are turning faster than walking pace. # Activate or deactivate Automatic Door Lock. In the following situations, there is a danger of being locked out when the function is activated: R The vehicle is being towed or pushed. R The vehicle is being tested on a roller dyna­mometer. Opening and closing the front convenience doors & WARNING Risk of becoming trapped dur­ing automatic closing of the front conveni­ence doors Parts of the body could become trapped. There may be people or animals in the closing area. # Make sure that nobody is in the vicinity of the closing area. # Use one of the following options to stop the closing process: R Press the Üor s button on the SmartKey. R Driver's door: depress the brake pedal. R Pull the inner or outer door handles. R Push against or pull the door. R Touch the touch screen in the conve­ nience menu in the multimedia sys­tem. * NOTE Always observe the following during automatic opening and closing of the front convenience doors Your view of your surroundings may be restric­ted. # Make sure that there are no persons, animals or objects in the area of the doors when opening and closing. # When opening, pay particular attention to low objects and obstacles in the side window area. Opening or closing the front convenience doors The following functions are required to open and close the front convenience doors automatically: R KEYLESS-GO (/ page 77) R Power closing function (/ page 85) R Parking Package with 360° camera (/ page 255) or Remote Parking Assist with Mirror Package (/ page 269) R Active Blind Spot Assist (/ page 247) The convenience doors can then be opened and closed automatically. % If Active Blind Spot Assist is deactivated or unavailable, the convenience doors cannot be opened from inside. The following options are available for opening or closing the front convenience doors: R the key (to open and close) R approaching the vehicle (to open the driver's door) R depressing the brake pedal (to close the driv­er's door) R the inner front door handles (to open and close) R the outer front door handles (to open and close) R the multimedia system (/ page 84) Special features of the front convenience doors: R If, when closing, the front door has reached the first detent position, the power closing function (/ page 85) will automatically draw the door into the lock. # To open with the key: press and hold the Ü key button until the door starts to open. % In the multimedia system, you can set whether the driver's door, the front passenger door or no door opens when you press the Ü button on the key (/ page 84). If no front door opens, the convenience open­ing function will be carried out when the Ü button is pressed. The convenience opening function opens, for example, the side windows and the panoramic sliding sunroof. Further information on convenience opening (/ page 95). # To close with the key: press and hold the s key button until the door starts to close. Both open front doors will close. # Comfort locking with the key: press and hold the s key button. All open front doors, side windows and the panoramic sliding sunroof will close. % Press the s button on the key again to lock the vehicle. To open the vehicle by approaching it: * NOTE Vehicle damage due to uninten­tional opening of a door R When passing the vehicle R When using an automatic car wash R When using a high-pressure cleaner # In these situations, deactivate the func­tion of the key. When you approach your vehicle and the key is detected, the vehicle will be unlocked and the driver's door will open automatically. # Set the function in the multimedia system (/ page 84). % If no further operations are performed when the driver's door has been opened automati­cally, the door will close after a set time. The driver's door will not be locked. To close the driver's door with the brake pedal: # Depress the brake pedal until the door starts to close. To open or close the front convenience doors from inside: # Briefly pull the door handle (/ page 76). Automatic operation will then be started. % If you pull the door handle during automatic operation, the opening or closing process will be stopped. If you pull the door handle again, the process will continue in reverse order. # To open the front convenience doors from out­side: pull on the outside door handle. # To close the front convenience doors from outside: touch recessed sensor surface 1 on the door handle. Object detection Object detection uses several sensors to monitor the opening range of the convenience doors in order to detect objects. If one of the sensors detects an object, the convenience doors will be stopped and a warning will be displayed in the multimedia system. # Manually open a door stopped in an intermedi­ ate position. Even if the convenience doors are equipped with sensors, it cannot be guaranteed that all objects will be detected. Object detection is only an aid and is not a substitute for the attention of the vehicle occupants to their immediate surround­ings when opening and closing the convenience doors. The vehicle occupants are always responsi­ble for opening and closing the doors safely. Detection range of the sensors 1 3 ft (approximately 1 m) * NOTE Risk of an accident from objects at close range Object recognition may not detect certain objects at close range. # When opening the convenience doors, pay particular attention to low objects and obstacles in the side window area. Object detection does not always detect such objects at close range, especially during movement. The vehicle or other objects could otherwise be damaged. * NOTE Risk of accident due to faulty sen­sors The sensors may malfunction because of snow or due to objects that absorb ultrasonic waves. # Make sure that the convenience doors are free from dirt, ice or slush. # Be especially careful when opening the convenience doors if other ultrasonic sources are nearby. * NOTE Risk of accidents if the detection performance of the sensors in the conve­nience doors is restricted If the sensors are covered, the convenience doors cannot function reliably. # Do not apply stickers, foils or other coat­ings to the outside of the convenience doors. The sensors may otherwise be blocked and obstacles may not be detected or only detected to a limited extent. Exit warning when opening the front doors from inside The exit warning of Active Blind Spot Assist is used as an additional safeguard. If an obstacle is detected, the convenience function will be deacti­vated and the moving door will be stopped. # Manually open a door stopped in an intermedi­ate position. & WARNING Risk of accident despite exit warning The exit warning neither reacts to stationary objects nor to persons or road users approaching you at a greatly differing speed. The exit warning cannot warn drivers in these situations. # Always pay particular attention to the traffic situation when opening the doors and make sure there is sufficient clear­ance. The exit warning is only an aid and not a substi­tute for the attention of vehicle occupants. The responsibility for opening and closing the doors and for leaving the vehicle remains with the vehi­cle occupants. % Further information on Active Blind Spot Assist with exit warning (/ page 247). Blockage detection when opening the front doors If an obstacle obstructs a door during the auto­matic opening process, blockage detection will stop the door. The automatic blockage detection function is only an aid and is not a substitute for your attentiveness. # Manually open a door stopped in an intermedi­ate position. * NOTE Damage to the convenience doors despite blockage detection Blockage detection may not be able to stop the automatic opening process of the doors in all cases. This can be the case in particular with light, soft objects. # Therefore, make sure that there is suffi­cient clearance next to the vehicle. Automatic reversing function when the front doors are closing The doors are equipped with automatic blockage detection with a reversing function. If an obstacle stops a door during the automatic closing proc­ess, it will automatically open again. The auto­matic reversing function is only an aid and is not a substitute for your attentiveness. # During the closing process, make sure that no body parts are in the closing area. & WARNING Risk of becoming trapped despite reversing function The reversing function will not react: R To soft, light and thin objects, e.g. fingers. R Towards the end of the closing process. In these situations in particular, the reversing function cannot prevent someone being trap­ped. # Make sure that no body parts are in the closing area. # If someone is trapped, use one of the fol­lowing options: R Press the Üor s button on the SmartKey. R Driver's door: depress the brake pedal. R Pull the inner or outer door handles. R Push against or pull the door. R Touch the touch screen in the conve­nience menu in the multimedia sys­tem. Setting convenience doors Multimedia system: 4 © 5 Settings 5 Vehicle 5 Comfort # Activate or deactivate Comfort Doors. Operating convenience doors # Select ´. # Select Open door control. The window for operating the doors will open. You can open or close the doors using the slider. # Select Cancel Process. The procedure will be interrupted and the door will remain in the position it has reached. # Select Close All. All doors will be closed simultaneously. Setting the key function for the convenience doors # Select ´. # Select Key assignment. Convenience Opening for Windows, open Right Front Door and open Left Front Door can be set separately for operation with the key. Door opening on approach # Activate or deactivate the function. When the function is activated, the driver's door will open automatically when the vehicle is approached. Warning of obstacles in the door area # Activate or deactivate the function. The vehicle warns you of obstacles in the door area with acoustic feedback and a graphic dis­play. Power closing function & WARNING Risk of becoming trapped when the doors close automatically Body parts or objects can become trapped, causing injuries. # Ensure that no body parts or objects are in the closing area. # Automatic closing of the doors can be canceled by pulling the outer or inner door handle. If you push the door into the lock to the first detent position, the power closing function will automatically pull the door into the lock. % If the vehicle is locked from the outside, or while pulling away, an automatic closing of the doors can be triggered. Locking/unlocking the vehicle with the emer­ gency key Unlocking a left-hand vehicle door with the mechanical key % If you unlock and open the driver's door with the emergency key, this will trigger the anti-theft alarm system. % If you unlock the driver's door with the emer­gency key, the trunk lid will not be unlocked. Vehicles without KEYLESS-GO # Remove the emergency key (/ page 74). # Pull and hold the door handle. # Insert the emergency key into the lock cylin­der. # Turn the emergency key counterclockwise to position 1. # Turn the emergency key back to its starting position. # Remove the emergency key and release the door handle. Vehicles with KEYLESS-GO # Remove the emergency key (/ page 74). If the door handle is retracted:# Insert a flat, non-metallic object behind door handle 1 from above and pry it slightly out­ward. # Reach behind door handle 1 from below, pull it outward as far as the point of resistance and hold it there. If the door handle is extended:# Pull door handle 1 outward as far as the point of resistance and hold it there. # Insert the emergency key into the lock cylin­der. # Turn the emergency key counterclockwise to position 1. # Forcefully pull door handle 1 outward past the point of resistance. # Turn the emergency key back to its starting position. # Remove the emergency key and release the door handle. Locking the doors # Insert a suitable object, e.g. the emergency key, into opening 1 on the door lock. # To lock the left-hand side of the vehicle: turn the emergency key clockwise as far as it will go. # To lock the right-hand side of the vehicle: turn the emergency key counterclockwise as far as it will go. If the locked door is then closed, it will no longer be possible to open it from the outside. Opening the trunk lid * NOTE Damage to the trunk lid by obsta­cles above the vehicle The trunk lid swings upwards when it is opened. # Therefore, make sure that there is suffi­cient clearance above the trunk lid. # With the trunk lid unlocked, press the top of the Mercedes star. # Vehicles with HANDS-FREE ACCESS: Make a kicking movement with your foot below the bumper (/ page 91). # Pull remote operating switch 1 until the trunk lid opens. or # Press and hold the H button on the Smart-Key. # If the trunk lid is stopped in an intermediate position, pull it upwards. Release it as soon as it begins to open. # With the trunk lid opening height restriction activated, manually pull the stopped trunk lid upwards. If an obstacle obstructs the trunk lid during the automatic opening process, blockage detection will stop the trunk lid. The automatic blockage detection function is only an aid and is not a sub­stitute for your attentiveness. Closing the trunk lid & WARNING Risk of injury from unsecured items in the vehicle If objects, luggage or loads are not secured or not secured sufficiently, they could slip, tip over or be thrown around and thereby hit vehi­cle occupants. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects in such a way that they cannot be thrown around. # Before the journey, secure objects, lug­gage or loads against slipping or tipping over. Observe the notes on loading the vehicle. Notes on closing the trunk lid: your vehicle is equipped with automatic SmartKey recognition. If a SmartKey belonging to the vehicle is detected in the vehicle, the trunk lid will not be locked and will pop open again. Note that the trunk lid will not be locked if the fol­lowing situation occurs: R You have locked the vehicle and close the trunk lid while a SmartKey belonging to the vehicle is inside the vehicle. and R A second SmartKey belonging to the vehicle is not detected outside the vehicle. Automatic SmartKey recognition is only an aid and is not a substitute for your attentiveness. # Before locking, ensure that at least one SmartKey belonging to the vehicle is outside the vehicle. # To close the trunk lid: pull the trunk lid down­wards using the handle recess and push it closed. % Vehicles with trunk lid convenience closing: if you lightly push the trunk lid closed, the power closing function will automatically pull the trunk lid into the lock. Vehicles with trunk lid convenience closing & WARNING Risk of becoming trapped dur­ing automatic closing of the trunk lid Parts of the body could become trapped. There may be people in the closing area. # Make sure that nobody is in the vicinity of the closing area. # Use one of the following options to stop the closing process: R Press the H button on the Smart- Key. R Press or pull the remote operating switch on the driver's door. R Press the closing or locking button on the trunk lid. R Pull the trunk lid handle. Vehicles with HANDS-FREE ACCESS: it is also possible to stop the closing process by making a kicking movement below the rear bumper. # Pull the trunk lid handle. Release it as soon as it begins to close. # If the trunk lid is stopped in an intermediate position, push it downwards. The trunk lid will continue to close. # Push remote operating switch 1 until the trunk lid is fully closed. # Press closing button 1 on the trunk lid. Vehicles with KEYLESS-GO # Press locking button 2 on the trunk lid. If a SmartKey is detected outside the vehicle, the trunk lid will close and the vehicle will be locked. # With the trunk lid completely open, press and hold the H button on the SmartKey. The SmartKey must be in the vicinity of the vehi­cle. Vehicles with HANDS-FREE ACCESS # With the trunk lid completely open, make a kicking movement with your foot below the bumper (/ page 91). Trunk lid automatic reversing function The trunk lid is equipped with automatic blockage detection with a reversing function. If an obstacle obstructs the trunk lid during the automatic clos­ing process, it will automatically open again. The automatic reversing function is only an aid and is not a substitute for your attentiveness. # During the closing process, make sure that no body parts are in the closing area. & WARNING Risk of becoming trapped despite reversing function The reversing function will not react: R to soft, light and thin objects, e.g. fingers R towards the end of the closing procedure In these situations in particular, the reversing function cannot prevent someone being trap­ped. # Ensure that no body parts are in the closing area. # If someone is trapped, use one of the fol­lowing options: R Press the H button on the Smart- Key. R Press the remote operating switch on the driver's door. R Press the closing or locking button on the trunk lid. R Pull the trunk lid handle. HANDS-FREE ACCESS function With HANDS-FREE ACCESS, you can open, close or stop the movement of the trunk lid by making a kicking motion under the rear bumper. The kicking motion will trigger the opening or closing process alternately. Observe the notes when opening (/ page 87) and closing (/ page 88) the trunk lid. % A warning tone will sound while the trunk lid is opening or closing. * NOTE Damage to the vehicle caused by unintentionally opening the trunk lid or a door R When using an automatic car wash R When using a high pressure cleaner # Deactivate the function of the SmartKey in these situations. or # Make sure that the SmartKey is at a min­imum distance of 10 ft (3 m) (power washer) or 20 ft (6 m) (automatic car wash) away from the vehicle. When making the kicking motion, make sure that you are standing firmly on the ground. You could otherwise lose your balance, e.g. on ice. Observe the following notes: R The key is behind the vehicle. R Stand at least 12 in (30 cm) away from the vehicle while performing the kicking motion. R Do not come into contact with the bumper while making the kicking motion. R Do not carry out the kicking motion too slowly. R The kicking motion must be towards the vehi­cle and back again. 1Detection range of the sensorsIf several consecutive kicking motions are notsuccessful, wait ten seconds.System limits The system may be impaired or may not function in the following cases: R The sensors are dirty, e.g. due to road salt or snow. R The kicking motion is made using a prosthetic leg. The trunk lid could be opened or closed uninten­tionally in the following situations: R A person's arms or legs are moving in the sen­sor detection range, e.g. when the person is polishing the vehicle or picking up objects. R Objects are moved or placed behind the vehi­cle, e.g. a charging cable or luggage. R Clamping straps, tarpaulins or other coverings are pulled over the bumper. R A protective mat with a length reaching over the trunk sill down into the detection range of the sensors is used. R The protective mat is not secured correctly. Deactivate the function of the key (/ page 73) or do not carry the key about your person in such situations. Switching separate trunk locking on and off Multimedia system: 4 © 5 Settings 5 Vehicle 5 Locking Function Switching separate trunk locking on # Select Block Trunk Access. # Create a PIN. # Confirm the PIN with OK. # Enter the PIN again and confirm it. The trunk will remain locked if you unlock the vehicle centrally. % If an accident has been detected, the trunk will unlock even if separate locking is switched on. Switching separate trunk locking off # Select Block Trunk Access. # Enter the PIN. If the PIN is correct, separate trunk locking will be switched off and the PIN deleted. Unlocking and opening the trunk from inside with the emergency release Requirements: R The 12 V vehicle battery is connected and charged. #Press emergency release button 1briefly.Activating/deactivating the trunk lid opening height restriction Multimedia system: 4 © 5 Settings 5 Vehicle 5 Other Functions # Activate or deactivate Opening Height Lim­iter. This function prevents the trunk lid from hitting a low garage ceiling, for example. Opening and closing the side windows & WARNING Risk of entrapment when open­ing a side window When opening a side window, parts of the body could be drawn in or become trapped between the side window and window frame. # When opening, make sure that nobody is touching the side window. # If someone is trapped, release the but­ton immediately or pull it in order to close the side window again. & WARNING Risk of becoming trapped when closing a side window When closing a side window, body parts could be trapped in the closing area in the process. # When closing, make sure that no body parts are in the closing area. # If someone is trapped, release the but­ton immediately or press the button in order to reopen the side window. & WARNING Risk of becoming trapped when children operate the side windows Children could become trapped if they operate the side windows, particularly when unatten­ded. # Activate the child safety lock for the rear passenger compartment side windows. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Never leave children unattended in the vehicle. Requirements: R The power supply or the vehicle has been switched on. 1 Closes 2 Opens The buttons on the driver's door take precedence. # To start automatic operation: press the W button beyond the point of resistance or pull and release it. # To interrupt automatic operation: press or pull the W button again. When the vehicle is switched off, you can con­ tinue to operate the side windows. This function is available for around four minutes or until a front door is opened. Automatic reversing function of the side windows If an obstacle impedes a side window during the closing process, the side window will open again automatically. The automatic reversing function is only an aid and is not a substitute for your atten­tiveness. # During the closing process, make sure that no body parts are in the closing area. & WARNING Risk of becoming trapped despite there being reversing protection on the side window The reversing function does not react: R To soft, light and thin objects, e.g. fingers. R During resetting. The reversing function cannot prevent some­one from becoming trapped in these situa­tions. # During the closing process, make sure that no body parts are in the closing area. # If someone becomes trapped, press the W button to open the side window again. Convenience opening (ventilating the vehicle before starting a journey) & WARNING Risk of entrapment when open­ing a side window When opening a side window, parts of the body could be drawn in or become trapped between the side window and window frame. # When opening, make sure that nobody is touching the side window. # Release the button immediately if some­body becomes trapped. Requirements R The SmartKey is in the immediate vicinity of the vehicle. # Press and hold the Ü button on the Smart-Key. The following functions will be performed: R The vehicle will be unlocked. R The side windows will be opened. R The panoramic sliding roof will be opened. R The seat ventilation of the driver's seat will be switched on. % If the roller sunblind of the panoramic sliding sunroof is closed, the roller sunblind will be opened first. # To interrupt convenience opening: release the Ü button. # To continue convenience opening: press and hold the Ü button again. Convenience closing (closing the vehicle from out­ side) & WARNING Risk of entrapment due to not paying attention during convenience clos­ing When the convenience closing feature is oper­ating, parts of the body could become trapped in the closing area of the side window and the sliding sunroof. # When the convenience closing feature is operating, monitor the entire closing process and make sure that no body parts are in the closing area. Requirements: R The SmartKey is in the immediate vicinity of the vehicle. # Press and hold the s button on the Smart-Key. The following functions will be performed: R The vehicle will be locked. R The side windows will be closed. R The panoramic sliding roof will be closed. # To interrupt convenience closing: release the s button. # To continue convenience closing: press and hold the s button again. % Convenience closing also functions with KEY­LESS-GO (/ page 77). Resolving problems with the side windows & WARNING Risk of becoming trapped or fatally injured if reversing protection is not activated If you close a side window again immediately after it has been blocked, the side window will close with increased or maximum force. The reversing function is then not active and body parts may become trapped. # Make sure that no parts of the body are in the closing area. # To stop the closing process, release the button or press the button again to reopen the side window. One of the side windows cannot be closed and the cause is not obvious. # Check to see whether any objects are in the window guide. # Adjust the side windows. Adjusting the side windows If a side window is obstructed during closing and reopens again immediately: # Immediately after this, pull and hold the corre­sponding button again until the side window has closed and hold the button for at least one more second (readjustment). The side window will be closed without the automatic reversing feature. If the side window is obstructed again and reopens again immediately: # Immediately after this, pull and hold the corre­sponding button again until the side window has closed and hold the button for at least one more second (readjustment). The side window will be closed without the automatic reversing feature. The side windows cannot be opened or closed using the convenience opening feature. Possible causes: R The battery in the SmartKey is weak or dis­charged. # Check the battery using the indicator lamp (/ page 72). # Replace the SmartKey battery, if necessary (/ page 74). Opening and closing the sliding sunroof % The term "sliding sunroof" refers to the pano­rama roof with power tilt/sliding panel. & WARNING Risk of becoming trapped when the sliding sunroof is being opened and closed Body parts may become trapped in the range of movement. # During the opening and closing process, make sure that no body parts are in the sweep of the sliding sunroof. # If someone is trapped, release the con­trol panel immediately. or # Touch the control panel during automatic operation. The opening/closing process will be stopped. & WARNING Risk of becoming trapped if the sliding sunroof is operated by children Children operating the sliding sunroof could get caught in the moving parts, particularly if unattended. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the key with you and lock the vehicle. & WARNING Risk of becoming trapped when the roller sunblind is being opened and closed Body parts may become trapped between the roller sunblind and frame or sliding roof. # During the opening or closing process, make sure that no body parts are in the roller sunblind's range of movement. # If someone is trapped, release the con­trol panel immediately. or # Touch the control panel during automatic operation. The opening/closing process will be stopped. * NOTE Malfunction due to snow and ice Snow and ice may cause the sliding sunroof to malfunction. # Open the sliding sunroof only if it is free of snow and ice. * NOTE Damage caused by protruding objects Objects that protrude from the sliding sunroof may damage the seals. # Do not allow anything to protrude from the sliding sunroof. * NOTE Damage to panorama roof with power tilt/sliding panel caused by roof luggage rack If the panorama roof with power tilt/sliding panel is opened when a roof luggage rack is installed, the panorama roof with power tilt/ sliding panel may be damaged by the roof lug­gage rack. # Do not open the panorama roof with power tilt/sliding panel if a roof luggage rack is installed. The sliding sunroof and the roller sunblind are operated using control panel 1. The panorama roof with power tilt/sliding panel can be operated only when the roller sunblind is open. # To open: swipe backwards across control panel 1 and hold. # To close: swipe forwards across control panel 1 and hold. # To raise or lower: press control panel 1 briefly. # To start automatic operation: swipe forwards or backwards across control panel 1. # To cancel automatic operation: press control panel 1 again. The opening/closing process will be stopped. Automatic reversing function of the sliding sun­roof If an obstacle obstructs the sliding sunroof during the closing process, the sliding sunroof will open again automatically. The automatic reversing func­tion is only an aid and is not a substitute for your attentiveness. # During the closing process, make sure that no body parts are in the closing area. & WARNING Risk of becoming trapped despite reversing function The reversing function will not react: R To soft, light and thin objects, e.g. fingers. R Towards the end of the closing procedure. R During resetting. # During the closing process, make sure that no body parts are in the closing area. # If someone is trapped, release the con­trol panel immediately. or # Touch the control panel during automatic closing. The closing process will be stopped. Automatic reversing function of the roller sunblind If an obstacle obstructs the roller sunblind during the closing process, the roller sunblind will open again automatically. The automatic reversing func­tion is only an aid and is not a substitute for your attentiveness. # When closing the roller sunblind, make sure that no body parts are in the range of move­ment. & WARNING Risk of becoming trapped despite reversing function In particular, the reversing function does not react to soft, light and thin objects, e.g. fin­gers. # When closing the roller sunblind, make sure that no body parts are in the range of movement. # If someone is trapped, release the con­trol panel immediately. or # Touch the control panel during automatic closing. The closing process will be stopped. Automatic functions of the sliding sunroof % The term "sliding sunroof" refers to the pano­rama roof with power tilt/sliding panel. Rain closing function when driving Vehicles with a panorama roof with power tilt/ sliding panel: if it starts to rain, the raised sliding sunroof will automatically be lowered while the vehicle is in motion. Automatic lowering function Vehicles with a panorama roof with power tilt/ sliding panel: if the sliding sunroof is raised at the rear, it will automatically be lowered slightly at higher speeds. At low speeds, it will be raised again automatically. & WARNING Risk of becoming trapped by automatic lowering of the sliding sunroof At higher speeds, the raised sliding sunroof will automatically be lowered slightly at the rear. # Make sure that nobody reaches into the sliding sunroof's range of movement while the vehicle is in motion. # If someone becomes trapped, touch the control panel. Rectifying problems with the sliding sunroof & WARNING Risk of becoming trapped or fatal injuries when the sliding sunroof is closed again If you close the sliding sunroof again immedi­ately after it has been blocked or reset, the sliding sunroof will close with increased or maximum force. There is a risk of becoming trapped or even of fatal injuries! # Make sure that no parts of the body are in the closing area. # If someone is trapped, release the con­trol panel immediately. or # Touch the control panel during automatic closing. The closing process will be stopped. The sliding sunroof cannot be closed and you can­not see the cause. % The term "sliding sunroof" refers to the panor­amic sliding sunroof. # Immediately after automatic reversing, swipe forwards across the control panel (/ page 96) and hold until the sliding sunroof is closed. The sliding sunroof will be closed with increased force. If the sliding sunroof is obstructed again and opens again slightly: # Repeat the previous step. The sliding sunroof will be closed again with increased force. The sliding sunroof or the roller sunblind is not operating smoothly. # Reset the sliding sunroof and the roller sun-blind. Resetting the sliding sunroof and the roller sun-blind # Swipe forwards across the control panel (/ page 96) and hold repeatedly until the sliding sunroof is completely closed. # Press and hold the control panel for another second. # Press and hold the control panel until the front roller sunblind is completely closed. # Press and hold the control panel for another second. # Use automatic operation to fully open and then close the sliding sunroof. Function of the immobilizer The immobilizer prevents your vehicle from being started without the correct SmartKey. The immobilizer is automatically activated when the vehicle is switched off, and deactivated when the vehicle is switched on. When leaving the vehicle, always take the Smart-Key with you and lock the vehicle. Anyone can start the vehicle if a valid SmartKey has been left inside the vehicle. % In the event that the engine cannot be started (yet the vehicle's battery is charged), the sys­tem is not operational. Contact an authorized Mercedes-Benz Center or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada). ATA (anti-theft alarm system) ¦Function of the ATA system If the ATA system is armed, a visual and audible alarm is triggered in the following situations: R when a door is opened R when the trunk lid is opened R when interior protection is triggered (/ page 102) R when the tow-away alarm is triggered (/ page 101) The ATA system is armed automatically after approximately ten seconds in the following situa­tions: R after the vehicle is locked with the SmartKey R after the vehicle is locked using KEYLESS-GO Example: with MBUX Hyperscreen Indicator lamp 1 flashes when the ATA system is armed. The ATA system is deactivated automatically in the following situations: R after the vehicle is unlocked with the Smart-Key R after the vehicle is unlocked using KEYLESS­GO R after the start/stop button is pressed with the SmartKey in the stowage compartment (/ page 175) % When the Mercedes-Benz emergency call sys­tem is active and the alarm stays on for more than 30 seconds, a message is automatically sent to the customer center (/ page 337). % In the case of severe battery discharging, the anti-theft alarm system is automatically deac­tivated to facilitate the next engine start. ¦Deactivating the ATA # Press the Ü, s or H button on the SmartKey. or # Press the start/stop button with the SmartKey in the stowage compartment (/ page 175) Deactivating the alarm using KEYLESS-GO # With the SmartKey outside the vehicle, touch the inner surface of the door handle. Function of the tow-away alarm % This function may not be available in all coun­ tries. An audible and visual alarm is triggered if an alter­ation to your vehicle's angle of inclination is detected while the tow-away alarm is armed. The tow-away alarm is automatically armed after approximately 60 seconds: R after the vehicle is locked with the SmartKey R after the vehicle is locked using KEYLESS-GO The tow-away alarm is armed only when the fol­lowing components are closed: R doors R trunk lid The tow-away alarm is automatically deactivated: R after the Üor H button on the Smart-Key is pressed R after the start/stop button is pressed with the SmartKey in the stowage compartment (/ page 175) R after the vehicle is unlocked using KEYLESS­GO R when HANDS-FREE ACCESS is in use Information on collision detection when a vehicle is parked (/ page 210). Arming/deactivating tow-away alarm Multimedia system: 4 © 5 Settings 5 Vehicle 5 Opening/closing 5 Vehicle Protection # Arm or deactivate Tow-away Protection. Tow-away alarm is armed again in the following cases: R The vehicle is unlocked again. R A door is opened. R The vehicle is locked again. Function of interior protection % This function may not be available in all coun­tries. When interior protection is armed, a visual and audible alarm is triggered if movement is detected in the vehicle interior. Interior protection is armed automatically approx­imately ten seconds: R after the vehicle is locked with the SmartKey R after the vehicle is locked using KEYLESS-GO Interior protection is armed only when the follow­ing components are closed: R Doors R Trunk lid Interior protection is automatically deactivated: R after the Üor H button on the Smart-Key is pressed R after the start/stop button is pressed with the SmartKey in the stowage compartment (/ page 175) R after the vehicle is unlocked using KEYLESS­GO R when HANDS-FREE ACCESS is in use The following situations can lead to a false alarm: R when there are moving objects such as mas­ cots in the vehicle interior R when a side window is open R when a panoramic sliding sunroof is open Arming/deactivating interior protection Multimedia system: 4 © 5 Settings 5 Vehicle 5 Opening/closing 5 Vehicle Protection # Arm or deactivate Interior Motion Sensor. Interior protection is armed again in the following cases: R The vehicle is unlocked again. R A door is opened. R The vehicle is locked again. & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. Ensure the following when adjusting steering wheel 1, seat belt 2 and driver's seat 3: R You are sitting as far away from the driver's airbag as possible, taking the following points into consideration: R You are sitting in an upright position R Your thighs are slightly supported by the seat cushion R Your legs are not fully extended and you can depress the pedals properly R The back of your head is supported at eye level by the center of the head restraint R You can hold the steering wheel with your arms slightly bent R You can move your legs freely R You can see all the displays on the driver's dis­play clearly. R You have a good overview of the traffic condi­tions R Observe the notes on correctly fastening the seatbelt (/ page 44). & WARNING Risk of injury due to excessive load on the grab handles If you apply your full body weight to the grab handle or pull it abruptly, the grab handle may be damaged or come loose from its anchor­age. This may result in injuries. # Use the grab handles only to stabilize the seating position or to assist in getting in and out of the seat. Adjusting the front seat manually and electrically & WARNING Risk of becoming trapped if the seats are adjusted by children Children could become trapped if they adjust the seats, particularly when unattended. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Never leave children unattended in the vehicle. You can adjust the seats when the vehicle is switched off. & WARNING Risk of becoming trapped when adjusting the seat When you adjust a seat, you or other vehicle occupants could become trapped, e.g. on the seat guide rail. # When adjusting a seat, make sure that no one has any part of their body within the sweep of the seat. Observe the safety notes on "Airbags" and "Chil­dren in the vehicle". & WARNING Risk of accident due to the driver's seat not being engaged The driver's seat may move unexpectedly while driving. This could cause you to lose control of the vehicle. # Always make sure that the driver's seat is engaged before starting the vehicle. & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. & WARNING Risk of becoming trapped if the seat height is adjusted carelessly If you adjust the seat height carelessly, you or other vehicle occupants could be trapped and thereby injured. Children in particular could accidentally press the electrical seat adjustment buttons and become trapped. # While moving the seats, make sure that hands or other body parts do not get under the lever assembly of the seat adjustment system. & WARNING Risk of injury due to head restraints not being installed or being adjusted incorrectly If head restraints have not been installed or have not been adjusted correctly, there is an increased risk of injury in the head and neck area, e.g. in the event of an accident or when braking. # Always drive with the head restraints installed. # Before driving off, make sure for every vehicle occupant that the center of the head restraint supports the back of the head at about eye level. Adjust the head restraint fore-and-aft position so that it is as close as possible to the back of your head. & WARNING Risk of injury or death due to an incorrect seat position The seat belt does not offer the intended level of protection if you have not moved the seat backrest to an almost vertical position. In particular, you could slip beneath the seat­belt and become injured. # Adjust the seat properly before begin­ning your journey. # Always ensure that the seat backrest is in an almost vertical position and that the shoulder belt is routed across the center of your shoulder. & WARNING Risk of injury or death due to objects under the co-driver seat Objects trapped under the co-driver seat can interfere with the function of the automatic co-driver airbag shutoff or damage the system. # Do not store any objects under the co-driver seat. # When the co-driver seat is occupied, make sure that no objects are trapped under the co-driver seat. * NOTE Damage to the seats when adjust­ing The seats may be damaged by objects when adjusting the seats. # When adjusting the seats, make sure that there are no objects in the footwell, under or behind the seats. 1 Seat backrest inclination 2 Seat height 3 Seat fore-and-aft position # To adjust the seat fore-and-aft position: lift lever 3 and slide the seat into the desired position. # Make sure that the seat is engaged. Adjusting the front seat electrically & WARNING Risk of becoming trapped if the seats are adjusted by children Children could become trapped if they adjust the seats, particularly when unattended. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Never leave children unattended in the vehicle. You can adjust the seats when the vehicle is switched off. & WARNING Risk of becoming trapped when adjusting the seat When you adjust a seat, you or other vehicle occupants could become trapped, e.g. on the seat guide rail. # When adjusting a seat, make sure that no one has any part of their body within the sweep of the seat. Observe the safety notes on "Airbags" and "Chil­dren in the vehicle". & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. & WARNING Risk of becoming trapped if the seat height is adjusted carelessly If you adjust the seat height carelessly, you or other vehicle occupants could be trapped and thereby injured. Children in particular could accidentally press the electrical seat adjustment buttons and become trapped. # While moving the seats, make sure that hands or other body parts do not get under the lever assembly of the seat adjustment system. & WARNING Risk of injury due to head restraints not being installed or being adjusted incorrectly If head restraints have not been installed or have not been adjusted correctly, there is an increased risk of injury in the head and neck area, e.g. in the event of an accident or when braking. # Always drive with the head restraints installed. # Before driving off, make sure for every vehicle occupant that the center of the head restraint supports the back of the head at about eye level. Adjust the head restraint fore-and-aft position so that it is as close as possible to the back of your head. & WARNING Risk of injury or death due to an incorrect seat position The seat belt does not offer the intended level of protection if you have not moved the seat backrest to an almost vertical position. In particular, you could slip beneath the seat­belt and become injured. # Adjust the seat properly before begin­ning your journey. # Always ensure that the seat backrest is in an almost vertical position and that the shoulder belt is routed across the center of your shoulder. & WARNING Risk of injury or death due to objects under the co-driver seat Objects trapped under the co-driver seat can interfere with the function of the automatic co-driver airbag shutoff or damage the system. # Do not store any objects under the co-driver seat. # When the co-driver seat is occupied, make sure that no objects are trapped under the co-driver seat. * NOTE Damage to the seats when adjust­ing The seats may be damaged by objects when adjusting the seats. # When adjusting the seats, make sure that there are no objects in the footwell, under or behind the seats. The switches for adjusting the seats do not move. You will therefore receive no direct feedback on the switch while pressing the switch. Feedback is provided only by the movement of the seat. 1 Head restraint height 2 Seat height 3 Seat cushion inclination 4 Seat cushion length 5 Seat fore-and-aft position 6 Seat backrest inclination # Save the settings with the memory function (/ page 119). % The head restraint height will be adjusted automatically when you adjust the seat height or the seat fore-and-aft position. Adjusting the 4-way lumbar support 1Higher2Softer3 Lower 4 Firmer # Use buttons 1 to 4 to adjust the contour of the backrest. Head restraints ¦Adjusting the front seat head restraints man­ ually & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. & WARNING Risk of injury due to head restraints not being installed or being adjusted incorrectly If head restraints have not been installed or have not been adjusted correctly, there is an increased risk of injury in the head and neck area, e.g. in the event of an accident or when braking. # Always drive with the head restraints installed. # Before driving off, make sure for every vehicle occupant that the center of the head restraint supports the back of the head at about eye level. Adjust the head restraint fore-and-aft position so that it is as close as possible to the back of your head. Adjusting manually # Take hold of the head restraint on both sides and press release knob 1. The head restraint will be unlocked in all direc­tions of movement simultaneously. # To raise or lower: pull the head restraint upwards or push it downwards. # To move forwards or backwards: pull the head restraint forwards or push it backwards. # Let go of release knob 1. Adjusting partially electrically # To raise or lower: adjust the head restraint using the buttons on the door operating unit (/ page 106). # To move forwards or backwards: take hold of the head restraint on both sides and press release knob 1. # Pull the headrest forwards or push it back­wards. # Let go of release knob 1. ¦Adjusting the head restraints of the rear seats # To lower: press release knob 1 in the direc­manually tion of the arrow and push the head restraint down until it engages. ¦Installing/removing the rear seat head restraints Removing #To set the center head restraint in the firstposition: pull the head restraint up until itengages.#To raise: push release knob 1 in the direc-tion of the arrow and pull the head restraint upuntil it engages.# Release the rear seat backrest and fold it for­wards slightly (/ page 122). # Press release knob 2 and pull the head restraint upwards as far as it will go. Release knob 1 will extend. # Push both release knobs 1 and 2 at the same time in the direction of the arrow and pull out the head restraint. # Fold the rear seat backrest back until it engages. Installing # Release the rear seat backrest and fold it for­wards slightly (/ page 122). # Insert the head restraint such that the notches on the bar are on the left when viewed in the direction of travel. # Push the head restraint down until it engages. # Fold the rear seat backrest back until it engages. Configuring the seat settings Multimedia system: 4 © 5 Comfort 5 Seat Adjusting the air cushions # On the corresponding menu, adjust the air cushions for Lumbar, Shoulders or Side Bol­sters. Setting the seat heating balance # Select Heating Settings. # Select Seat Heating Balance. # Adjust the heat distribution for the desired seat. % The seat heating balance in the rear passenger compartment can be set on the Seat Climate Control menu. Coupling neck heat to seat heating # Select Additional Neck Warmer. # Switch the function for the desired seat on or off. If the function is active, the neck heat of the additional cushion has been coupled to the seat heating. Setting automatic seat adjustment & WARNING Risk of becoming trapped dur­ing adjustment of the driver's seat after calling up a driver profile Selecting a user profile may trigger an adjust­ment of the driver's seat to the position saved under the user profile. You or other vehicle occupants could be injured in the process. # Make sure that when the position of driv­er's seat is being adjusted using the mul­timedia system, no people or body parts are in the seat's range of movement. If there is a risk of someone becoming trap­ped, stop the adjustment process immedi­ately: # a) Tap the warning message on the cen­tral display. or # b) Press a memory position button or a seat adjustment switch on the driver's door. The adjustment process will be stopped. Multimedia system: 4 © 5 Comfort 5 Seat 5 Automatic Seat Positioning Manually adjusting driver's seat and steering wheel position to body size The vehicle calculates a suitable driver's seat and steering wheel position on the basis of the driver's body size and sets this directly. # To set the unit of measurement: select cm or ft/in. # Set the size using the scale. # Select Start Positioning. The driver's seat and steering wheel position is adjusted to the body size that has been set. % You can also configure these settings via the Mercedes me user account for your user pro­file. By synchronizing the profiles in the vehi­cle and the Mercedes me connect profiles, you can carry over these settings for your vehicle. Further information about synchroniz­ing user profiles . % If the driver's seat and steering wheel position calculated by the vehicle is not practical or comfortable, it can be manually adapted at any time via the control buttons. The outside mirrors are not set via this func­tion. Instead, they have to be set manually via the operating switches. Overview of massage programs R Hot Relaxing Back: Based on the hot stone massage, the program combines heat and massage. It starts by massaging the back. In addition, warm pressure points become noticeable, starting in the pelvic area. R Hot Relaxing Shoulders: Combination of heat and massage. It starts by massaging the shoulders. In addition, warm pressure points become noticeable, starting in the pelvic area. R Activating Massage: Activating massage pro­gram with upward-moving massage waves. R Classic Massage: Relaxing back massage pro­gram. R Wave Massage: Regenerating massage pro­gram with massage waves across the back and in the seat cushion. R Mobilizing Massage: Mobilizing massage pro­gram with upward-moving massage waves. Can promote slower, deeper respiration. This can improve the supply of oxygen to cells and the brain. R Workout, Backrest and Workout, Cushion: These programs require your participation. Alternating between tensing and releasing helps to improve blood flow to your muscles. Press against a pressure point as soon as you feel it to activate back, abdominal and leg muscles. R Deep Waves Wave-like movements in the cushion can promote blood flow and meta­bolic processes in the lower back and legs. R Deep Workout Connect the Workout, Back­rest to the Workout, Cushion. The vibrations in the cushion intensify the effectiveness of tensing and releasing muscles when you tense against the pressure point. This supports met­abolic processes and blood flow in the but­tocks and legs. Selecting a massage program for the front seats Multimedia system: 4 © 5 Comfort 5 Massage # Select a massage program (/ page 112). # Start the program for the desired seat ;. # To set the massage intensity: switch Intensive on or off. % The availability of this function is dependent on the vehicle's equipment. Resetting seat settings Multimedia system: 4 © 5 Comfort 5 Seat # Select Reset. # Select ß for the desired seat. Switching the seat heating on/off & WARNING Risk of burns due to repeatedly switching on the seat heating Repeatedly switching on the seat heating can cause the seat cushion and seat backrest pad­ding to become very hot. In particular, the health of persons with limited temperature sensitivity or a limited ability to react to high temperatures may be affected or they may even suffer burn-like injuries. # Do not repeatedly switch on the seat heating. To protect against overheating, the seat heating may be temporarily deactivated after it has been switched on repeatedly. * NOTE Damage to the seats caused by objects or documents when the seat heat­ing is switched on When the seat heating is switched on, over­heating may occur due to objects or docu­ments placed on the seats, e.g. seat cushions or child seats. This could cause damage to the seat surface. # Make sure that no objects or documents are on the seats when the seat heating is switched on. Requirements: R The power supply is switched on. # Press button 1 for the respective seat repeatedly until the desired heating level is reached. Depending on the heating level, up to three indicator lamps will light up. If all indicator lamps are off, the seat heating is switched off. % The seat heating will automatically switch down from the three heating levels after 8, 10 and 20 minutes until the seat heating switches off. % If you switch the power supply off and on again within 20 minutes, the previous setting of the seat heating for the driver's seat will remain active. Switching the seat ventilation on/off Requirements: R The power supply is switched on. # Press button 1 for the respective seat repeatedly until the desired blower setting is reached. Depending on the blower setting, up to three indicator lamps will light up. If all indicator lamps are off, the seat ventilation is switched off. % If you switch the power supply off and on again within 20 minutes, the previous seat ventilation setting for the driver's seat will remain active. Adjusting the steering wheel mechanically & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. Unlocking & WARNING Risk of entrapment for children when adjusting the steering wheel Children could injure themselves if they adjust the steering wheel. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Fold release lever 1 down as far as it will go. # Adjust height 2 and distance 3 to the steering wheel. Locking # Fold release lever 1 up as far as it will go. Linking the steering wheel heater to the seat heat­ ing Requirements: R The power supply or the vehicle has been switched on. Multimedia system: 4 © 5 Comfort 5 Seat 5 Heating Settings # Tap on Additional Steering Wheel Heating. The steering wheel heater will be linked to the seat heating. When the function has been activated, the steer­ing wheel heater will automatically be activated and deactivated when you switch the seat heating on and off. Using the easy entry and exit feature & WARNING Risk of accident when pulling away during the adjustment process of the easy entry and exit feature You could lose control of the vehicle. # Always wait until the adjustment process is complete before driving off. & WARNING Risk of becoming trapped dur­ing adjustment of the easy entry and exit feature You and other vehicle occupants – particularly children – could become trapped. # Ensure that no one has a body part in the sweep of the steering wheel or driv­er's seat. If there is a risk of becoming trapped by the steering wheel: # Move the adjustment lever of the steer­ing wheel. The adjustment process will be stopped. If there is a risk of becoming trapped by the driver's seat: # Press the seat adjustment switch. The adjustment process will be stopped. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. Vehicles with memory function: you can stop the adjustment process by pressing one of the mem­ory function position switches. & WARNING Risk of becoming trapped if children activate the easy entry and exit feature- Children could become trapped if they acti­vate the easy entry- and exit feature, particu­larly when unattended. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. In order to use the easy entry and exit feature, the automatic seat adjustment function must have been switched on (/ page 111). When the easy entry and exit feature is active, the steering wheel and driver's seat will move as fol­lows: R The steering wheel will move upwards. R The driver's seat will move forward or back­ward to a seat position suitable for getting out of the vehicle. This will occur in the following situations: R You switch off the vehicle when the driver's door is open. R You open the driver's door when the vehicle is switched off. % The steering wheel will then move upwards only if it is not already as high as it will go. The driver's seat will then move backwards only if it is not already at the rear of the seat adjustment range. The steering wheel and the driver's seat will move back to the last driving position in the following cases: R You switch the power supply or the vehicle on when the driver's door is closed. R You close the driver's door when the vehicle is switched on. The last drive position will be saved when: R If you switch off the vehicle. R Vehicles with memory function: you call up the seat settings via the memory function. R Vehicles with memory function: you save the seat settings via the memory function. Vehicles with memory function: press one of the memory function position switches to stop the adjustment process. Setting the easy entry and exit feature Requirements: R The automatic seat adjustment has been acti­vated (/ page 111). Multimedia system: 4 © 5 Settings 5 Vehicle 5 Easy Entry And Exit Feature # Select Steering Wheel & Seat, Steering Wheel Only or Off. % If you are using an individual user profile, this information is used for the easy entry and exit feature. This will cause the driver's seat and steering wheel to move into the correct posi­tion automatically . Function of the memory function & WARNING Risk of an accident if the mem­ory function is used while driving If you use the memory function on the driver's side while driving, you could lose control of the vehicle as a result of the adjustments being made. # Only use the memory function on the driver's side when the vehicle is station­ary. & WARNING Risk of entrapment when adjusting the seat with the memory func­tion When the memory function adjusts the seat, you and other vehicle occupants – particularly children – could become trapped. # During the adjusting process of the memory function, ensure that no body parts are in the area of movement of the seat or the steering wheel. # If someone becomes trapped, press a preset position button or seat adjust­ment switch immediately. The adjustment process is stopped. & WARNING Risk of entrapment if the mem­ory function is activated by children Children could become trapped if they acti­vate the memory function, particularly when unattended. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. You can use the memory function when the vehi­cle is switched off. Seat adjustments for up to three people can be stored and called up using the memory function. You can save the following settings for the front seat: R Seat, backrest, head restraint position and contour of the seat backrest in the lumbar region R Seat heating: distribution of the heated sec­tions of the seat cushion and seat backrest R Driver's side: steering wheel position and posi­tion of the outside mirrors on the driver's and front passenger sides R Head-up display Operating the memory function Storing # Set the seat, the steering wheel, the head-up display and the outside mirrors to the desired positions. # Press the V button and then release it. # Press one of preset position buttons 4, T or U within three seconds. An acoustic signal will sound. The settings will now be stored. # To call up: press preset position button 4, T or U. The seat will be moved to the stored position. After the button is released, the front seat, outside mirrors, head-up display and steering column will continue to move into the stored positions automatically. Notes on loading the vehicle & WARNING Risk of injury from unsecured items in the vehicle If objects, luggage or loads are not secured or not secured sufficiently, they could slip, tip over or be thrown around and thereby hit vehi­cle occupants. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects in such a way that they cannot be thrown around. # Before the journey, secure objects, lug­gage or loads against slipping or tipping over. & WARNING Risk of injury due to objects being stowed incorrectly If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open storage spaces and mobile phone receptacles cannot always retain all objects within. There is a risk of injury, particularly in the event of sudden braking or abrupt changes in direction. # Always store objects such that they can­not be thrown around in such situations. # Always make sure that objects do not protrude from storage spaces, parcel nets or storage nets. # Close the lockable storage spaces before starting a journey. # Stow and secure objects that are heavy, hard, pointed, sharp-edged, fragile or too large in the cargo compartment. & WARNING Risk of accident from objects in the driver's footwell and front-passenger footwell Objects in the driver's footwell and front-passenger footwell may impede pedal travel or block a depressed pedal. This jeopardizes the operating and road safety of the vehicle. # Stow all objects in the vehicle securely so that they cannot get into the driver's footwell or front-passenger footwell. # Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient clearance for the pedals. # Do not use loose floor mats and do not lay multiple floor mats on top of one another. Vehicles with automatic front passenger air bag shut-off: objects trapped under the front passenger seat may interfere with the function of the automatic front passenger air bag shut-off or damage the system. Please observe the notes on the function of the automatic front passenger air bag shut-off (/ page 52). The driving characteristics of your vehicle are dependent on the distribution of the load within the vehicle. You should bear the following in mind when loading the vehicle: R never exceed the permissible gross mass or the gross axle weight rating for the vehicle (including occupants). the values are specified on the vehicle identification plate on the vehi­cle's B-pillar. R the load must not protrude above the upper edge of the seat backrests. R always place the load behind unoccupied seats if possible. R secure the load using the cargo tie-down rings and distribute the load evenly. Notes on driving with a roof load R Evenly distribute the roof load, and place heavy objects at the bottom. Also comply with the notes on loading the vehicle. R Drive attentively, and avoid suddenly pulling away, braking and steering as well as rapid cornering. R When transporting roof loads and when the vehicle is fully loaded or fully occupied, select drive programs ;and A. These are designed to focus on stability (/ page 184). % For more information on stowage compart­ments and stowage areas, please refer to the Digital Operator's Manual. Stowage spaces in the vehicle interior ¦Overview of the front stowage compartments 1 Stowage spaces in the doors 2 Stowage and telephone compartment beneath the armrest with multimedia and USB ports as well as stowage space, e.g. for an MP3 player 3 Stowage compartment in the front center console with cup holders, USB ports and charging module for wireless charging of mobile phones 4 Stowage tray below the central display of the multimedia system with USB ports 5 Glove box % The rubber mat in the stowage compartment in front center console 3 can be removed for cleaning with clean, lukewarm water. Please comply with the notes on caring for the interior (/ page 349). % Use the rubber strap to securely store objects in the stowage tray under the central display. ¦Opening and closing the stowage compartment in the front center console & WARNING Risk of injury due to objects being stowed incorrectly If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open storage spaces and mobile phone brackets cannot always retain all objects they contain. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects in such a way that they cannot be thrown around in such situations. # Always make sure that objects do not protrude from storage spaces, parcel nets or storage nets. # Close the lockable storage spaces before starting a journey. # Always stow and secure heavy, hard, pointed, sharp-edged, fragile or bulky objects in the trunk. Observe the notes on loading the vehicle. #To open: slide the cover of the stowage com-partment in the front center console all theway forwards in the direction of the arrow using handle 1. # To close: briefly push handle 1 of the open cover of the stowage compartment in the front center console forwards. The cover will automatically close the stowage compartment in the front center console. ¦Opening and closing the glove box # To open: press button 1. The glove box is open. # To close: fold the glove box upwards. The glove box is closed. Through-loading feature in the rear bench seat (EASY-PACK Quickfold) ¦Folding the rear seat backrests forward & WARNING Risk of becoming trapped when adjusting the seats When you adjust a seat, you may trap yourself or a vehicle occupant. # When adjusting a seat, make sure that no one has any body parts in the sweep of the seat. & WARNING Risk of an accident because the seat backrest is not engaged The seat backrest may fold forwards. There is a risk of the following, in particular: R The vehicle occupant may be pressed against the seat belt. The seat belt cannot protect as intended and could cause addi­tional injury. R A child restraint system is no longer prop­erly supported or properly positioned and may no longer fulfill its function as inten­ded. R The seat backrest cannot restrain objects or goods in the trunk or cargo compart­ment. Always ensure that the seat backrest is engaged, especially: R After the seat has been adjusted. R After the cargo compartment enlargement has been folded forwards Make sure that the red marking of the lock verifi­cation indicator is no longer visible. Otherwise, the seat backrest will not be locked. Always ensure that all vehicle occupants have their seat belts fastened correctly and are sitting properly. Particular attention must be paid to chil­dren. Requirements: R The rear seat backrest head restraints are fully inserted. R Vehicles with a folding rear armrest: the rear armrest has been folded up. Folding the outer rear seat backrests forward You can fold the center and right seat backrests forwards separately. The left seat backrest can be folded forwards only together with the center seat backrest. If you no longer require the folded-down rear seat backrest as a load area, fold the backrest back into place. # Ensure that the center seat backrest is in an upright position and locked to the left seat backrest (/ page 125). # Press the seat belt tongue of seat belt 1 into marked position 2. # Move the driver's or front passenger seat for­wards, if necessary. # To fold the left or right seat backrest for­wards: briefly press button 1 or 2. The rear seat will fold forwards. The center seat backrest will fold forwards together with the left seat backrest. Observe the following recommendations: R If you wish to fold only one of the outer seat backrests forwards, it is recommended that you fold the right seat backrest forwards. R If you wish to fold one of the outer seat backr­ests forwards together with the center seat backrest, it is recommended that you fold the left and center seat backrests forwards. Folding the center rear seat backrest forwards separately If you no longer require the folded-down seat backrest as a loading area, fold the backrest back into place. # Press release catch 3. # Fold seat backrest 2 forwards. ¦Folding back the rear seat backrest * NOTE Damage caused by trapping the seat belt when folding back the seat back­rest The seat belt could become trapped and thus damaged when the seat backrest is folded back. # Make sure that the seat belt is not trap­ped when folding back the seat backrest. # Move the driver's or front passenger seat for­wards, if necessary. # Swivel seat backrest 1 back until it engages. If the seat backrest is not engaged and locked in place, red lock verification indicator 2 will be visible. ¦Locking and releasing the release catch of the Overview of the tie-down eyes center rear seat backrest Observe the notes on loading the vehicle You can lock the center seat backrest release (/ page 119). catch if you want to secure the trunk against unauthorized access. The center seat backrest can then be folded forwards only together with the left seat backrest. #To lock or unlock: slide catch 1 upwards ordownwards.1Cargo tie-down rings%Four tie-down eyes are available only in vehi-cles equipped with the through-loading fea-ture in the rear bench seat (EASY-PACKQuickfold).Attaching a roof luggage rack & WARNING Risk of accident due to exceed­ing the maximum roof load The vehicle center of gravity and the usual driving characteristics as well as the steering and braking characteristics alter. If you exceed the maximum roof load, the driv­ing characteristics, as well as steering and braking, will be greatly impaired. # Never exceed the maximum roof load and adjust your driving style. You will find information on the maximum roof load in the "Technical data" section. * NOTE Damage to the vehicle due to not observing the maximum permitted head­room clearance If the vehicle height is greater than the maxi­mum permitted headroom clearance, the roof and other parts of the vehicle may be dam­aged. # If the vehicle height is greater than the permitted headroom clearance, do not enter. # Observe the changed vehicle height with add-on roof equipment. * NOTE Vehicle damage from non-approved roof luggage racks The vehicle could be damaged by roof luggage racks that have not been tested and approved by Mercedes-Benz. # Only use roof luggage racks tested and approved for Mercedes-Benz. # Depending on the vehicle equipment, ensure that when the roof luggage rack is installed, the tailgate can be fully opened. # Position the load on the roof luggage rack in such a way that the vehicle will not sustain damage even when it is in motion. * NOTE Damage to panorama roof with power tilt/sliding panel caused by roof luggage rack If the panorama roof with power tilt/sliding panel is opened when a roof luggage rack is installed, the panorama roof with power tilt/ sliding panel may be damaged by the roof lug­gage rack. # Do not open the panorama roof with power tilt/sliding panel if a roof luggage rack is installed. * NOTE Damage to the covers The covers may be damaged and scratched when being opened. # Do not use metallic or hard objects. # Carefully fold covers 1 upwards in the direc­tion of the arrow. # Secure the roof luggage rack to the fastening points beneath covers 1. # Comply with the installation instructions of the roof luggage rack manufacturer. # Secure the load on the roof luggage rack. Installing the cup holder in or removing it from the center console & WARNING - Risk of accident or injury when using the cup holder while the vehi­cle is moving The cup holder cannot secure containers while the vehicle is moving. If you use a cup holder while the vehicle is moving, the container may be flung around and liquids may be spilled. The vehicle occu­pants may come into contact with the liquid and if it is hot, they could be scalded. You could be distracted from traffic conditions and you may lose control of the vehicle. # Only use the cup holder when the vehicle is stationary. # Only use the cup holder for containers of the right size. # Close the container, particularly if the liquid is hot. & WARNING Risk of injury due to objects being stowed incorrectly If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open storage spaces and mobile phone brackets cannot always retain all objects they contain. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects in such a way that they cannot be thrown around in such situations. # Always make sure that objects do not protrude from storage spaces, parcel nets or storage nets. # Close the lockable storage spaces before starting a journey. # Always stow and secure heavy, hard, pointed, sharp-edged, fragile or bulky objects in the trunk. Requirements: R For installation: the locking catch is pushed in the direction of the cup holder. Observe the notes on loading the vehicle (/ page 119). #Slide locking catch 1 toward the side wall ofthe center console.The cup holder will be locked.# Insert cup holder housing 1 into the stowage compartment at a slight angle. # Place cup holder housing 1 in the stowage compartment, aligning the recesses with the two hubs 2 so that they fit. # Push the cup holder down. # Slide locking catch 1 toward the cup holder. The cup holder will be unlocked. # First pull the cup holder up in the direction of arrow 2 and then tilt it slightly to remove it from the stowage compartment. Using the cup holder # Place a beverage container in the cup holder. Bottom 2 of the cup holder will lower auto­matically and side walls 1 of the cup holder will move forward automatically. % The cup holder will automatically adjust to the size of the container placed in it. The side walls of the cup holder can also be acti­vated manually in different ways: R Press the bottom down slightly with the bever­age container. R Press on the grooved surface on the side wall of the cup holder. % Check whether the beverage container is held firmly by the cup holder. Some beverage con­tainers will not be secured adequately in the cup holder due to their shape or size. Original position When the cup holder is not in use, the side walls of the cup holder can be retracted manually. The bracket arms of the cup holder will automatically be retracted as well, and the cup holder's holding function will then no longer be available. # Manually push back the side walls of cup holder 2 in the direction of the arrow. Opening or closing the cup holder and small stow­ age compartment in the rear armrest & WARNING - Risk of accident or injury when using the cup holder while the vehi­cle is moving The cup holder cannot secure containers while the vehicle is moving. If you use a cup holder while the vehicle is moving, the container may be flung around and liquids may be spilled. The vehicle occu­pants may come into contact with the liquid and if it is hot, they could be scalded. You could be distracted from traffic conditions and you may lose control of the vehicle. # Only use the cup holder when the vehicle is stationary. # Only use the cup holder for containers of the right size. # Close the container, particularly if the liquid is hot. * NOTE Damage to the rear armrest due to body weight When folded out, the rear armrest can be damaged by body weight. # Do not sit or support yourself on the rear seat armrest. * NOTE Damage to the cup holder When the rear armrest is folded back the cup holder could become damaged. # Only fold the rear armrest back when the cup holder is closed. Opening the mobile phone holder in the rear arm­rest # Press cover trim 1 once. The mobile phone holder will open in the direction of the arrow. # Place the mobile phone in or remove it from the holder. Closing the mobile phone holder in the rear arm­rest # Press cover trim 1. The mobile phone holder and the cup holder are both open. # Press cover trim 1 a second time. The mobile phone holder will be closed. % The mobile phone holder is designed for two mobile phones or one tablet. The devices can also be charged in the holder by inserting the charging cable into the devices through the opening on the underside of the holder. % Observe the notes on loading the vehicle (/ page 119). Opening or closing the cup holders in the rear armrest # To open: press cover trim 1 twice. The cup holder will open in the direction of the arrow. # Place a container in or remove a container from the cup holder. # To close: slide the cup holder back into the rear armrest. Using the 12 V socket Requirements: R Only connect devices up to a maximum of 180 W (15 A). Depending on the vehicle equipment, the vehicle has 12 V sockets in the front passenger footwell and in the cargo compartment. Example: 12 V socket in the front passenger footwell # Fold up socket cap 1. # Insert the plug of the device. # Make sure that no cables are running through or secured in the air bag deployment area when using the socket. Also observe the notes on air bag protection (/ page 50). USB ports Depending on its equipment, the vehicle has the following USB ports: R In the stowage compartment in the front cen­ter console R In the stowage compartment under the front armrest R In front of the stowage tray under the central display of the multimedia system R In the electronics compartment in the center console of the rear passenger compartment You can charge a USB device, such as a mobile phone, at the USB ports using a suitable charging cable. Depending on the vehicle equipment, the devices can be charged with up to 20 V (5 A) when the vehicle is switched on. Notes on wirelessly charging the mobile phone & WARNING Risk of injury due to objects being stowed incorrectly If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open stowage spaces and mobile phone receptacles cannot always retain all objects within. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects so that they cannot be thrown around in such situations. # Always make sure that objects do not protrude from stowage spaces, parcel nets or stowage nets. # Close the lockable stowage spaces before starting a journey. # Always stow and secure heavy, hard, pointed, sharp-edged, fragile or bulky objects in the trunk/cargo compart­ment. Observe the notes on loading the vehicle. & WARNING Risk of fire from placing objects in the mobile phone storage compartment Placing other objects in the mobile phone storage compartment could constitute a fire hazard. # Apart from a mobile phone, do not place any other objects in the mobile phone storage compartment, especially those made of metal. * NOTE Damage to objects caused by plac­ing them in the mobile phone storage compartment If objects are placed in the mobile phone stor­age compartment, these may be damaged by electromagnetic fields. # Do not place credit cards, storage media, ski passes or other objects sensi­tive to electromagnetic fields in the mobile phone storage compartment. * NOTE Damage to the mobile phone stow­age compartment caused by liquids If liquids enter the mobile phone stowage compartment, the compartment may be dam­aged. # Ensure that no liquids enter the mobile phone stowage compartment. Always observe the notes for persons with elec­tronic medical aids (/ page 34). R Depending on the vehicle equipment, the mobile phone is connected to the vehicle's exterior antenna via the charging module. R The charging function and wireless connection of the mobile phone to the vehicle's exterior antenna are only available if the vehicle is switched on. R Small mobile phones may not be able to be charged in every position of the mobile phone stowage compartment. R Large mobile phones which do not rest flat in the mobile phone stowage compartment may not be able to be charged or connected with the vehicle's exterior antenna. R The mobile phone may heat up during the charging process. This may also depend on the applications (apps) currently open in the background. R To ensure more efficient charging and connec­tion with the vehicle's exterior antenna, remove the protective cover from the mobile phone. Protective covers which are necessary for wireless charging are an exception. Wirelessly charging a mobile phone in the front Requirements: R The mobile phone is suitable for wireless charging. A list of compatible mobile phones can be found at: https://www.mercedes-benz­ mobile.com/ Depending on the vehicle's equipment, the vehi­cle has the following options for wirelessly charg­ing a mobile phone in the cockpit: R In the front stowage compartment of the cen­ter console # Place the mobile phone as close to the center of mat 1 as possible with the display facing upwards. Example: wirelessly charging the mobile phone in thefront stowage compartment (with MBUX hyper-screen)When the charging symbol is shown in the multi­media system, the mobile phone is being charged. In addition, malfunctions during the mobile phone's charging process will be shown on the multimedia system display. % The mat can be removed for cleaning, e.g. using clean, lukewarm water. Wirelessly charging a mobile phone in the rear passenger compartment Requirements: R The mobile phone is suitable for wireless charging. A list of compatible mobile phones can be found at: https://www.mercedes-benz­ mobile.com/ Wireless charging in the rear passenger compart­ment in vehicles without MBUX rear passenger com­partment tablet # Fold down the rear passenger compartment armrest. # Place the mobile phone as close to the center of mat 1 as possible with the display facing upwards. When the indicator lamp at the front of the mobile phone system lights up, the mobile phone is being charged. In addition, malfunc­tions during the mobile phone's charging proc­ess will be shown by the indicator lamp flash­ing three times. Wireless charging in the rear passenger compart­ment in vehicles with MBUX rear passenger compart­ment tablet # Fold down the rear passenger compartment armrest. # Open the stowage compartment in rear passenger compartment armrest 1 (/ page 130). # Place the mobile phone as close to the center of mat 2 as possible with the display facing upwards. When the indicator lamp at the front of the mobile phone system lights up, the mobile phone is being charged. In addition, malfunc­tions during the mobile phone's charging proc-Installing floor mats ess will be shown by the indicator lamp flash­ing three times. % Observe the notes on loading the vehicle (/ page 119). & WARNING Risk of accident due to objects in the driver's footwell Objects in the driver's footwell may impede pedal travel or block a depressed pedal. This jeopardizes the operating and road safety of the vehicle. # Stow all objects in the vehicle securely so that they cannot get into the driver's footwell. # Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient room for the pedals. # Do not use loose floor mats and do not place floor mats on top of one another. #Slide the corresponding seat backwards andlay the floor mat in the footwell such that itfits.#Press studs 1 onto holders 2.#Adjust the corresponding seat.Seats and stowing 135 Removing floor mats # Slide the corresponding seat backwards and pull the floor mat off holders 2. # Adjust the corresponding seat. Light switch Information about lighting systems and your ¦Operating the light switch responsibility The various lighting systems of the vehicle are only aids. The driver of the vehicle is responsible for correct vehicle illumination in accordance with the prevailing light and visibility conditions, legal requirements and traffic situation. 1WLeft-hand parking lights2X Right-hand parking lights3T Parking lamp and license plate lamp4à Automatic driving lights (preferred lightswitch position)5 L Low beam / high beam 6 R Switches the rear fog light on/off When low beam is activated, the T indicator lamp for the parking lamp will be deactivated and replaced by the L low-beam indicator lamp. # Always park your vehicle safely using sufficient lighting, in accordance with the relevant legal stipulations. * NOTE Battery discharging by operating the standing lights Operating the standing lights over a period of hours puts a strain on the battery. # Where possible, switch on the right X or left W parking light. If the battery is insufficiently charged, the parking lamp or parking lights will be switched off auto­matically to facilitate the next engine start. The exterior lighting (except standing and parking lights) will switch off automatically when the driv­er's door is opened. R Observe the notes on locator lighting (/ page 146). ¦Automatic driving lights function When the vehicle is switched on, the standing lights, low beam and daytime running lights will be switched on automatically depending on the ambi­ent light. & WARNING Risk of accident when the low beam is switched off in poor visibility When the light switch is set to Ã, the low beam may not be switched on automatically if there is fog, snow or other causes of poor visi­bility such as spray. # In such cases, turn the light switch to L. The automatic driving lights are only an aid. You are responsible for the vehicle lighting. ¦Switching the rear fog light on/off Operating the combination switch for the lights Requirements: R The light switch is in the Lor Ãposi­tion. # Press button R. Please observe the country-specific laws on the use of rear fog lamps. 1High beam2Turn signal light, right3High-beam flasher4Turn signal light, left#Use the combination switch to select thedesired function.# Turn the light switch to the Lor à position. # Push the combination switch in the direction of arrow 1. When the high beam is activated, the indicator lamp for low beam L will be deactivated and replaced by the indicator lamp for high beam K. Switching off high beam # Push the combination switch in the direction of arrow 1 or pull it in the direction of arrow 3. High-beam flasher # Pull the combination switch in the direction of arrow 3. Turn signal indicators # To indicate briefly: push the combination switch briefly to the point of resistance in the direction of arrow 2 or 4. The corresponding turn signal light will flash three times. # To indicate permanently: push the combina-Activating/deactivating the hazard warning lights tion switch beyond the point of resistance in the direction of arrow 2 or 4. Vehicles with Active Lane Change Assist: R A turn signal indicator activated by the driver may continue to operate for the duration of the lane change. R If the driver indicated directly beforehand but a lane change was not immediately possible, the turn signal indicator may acti­vate automatically. Vehicles without MBUX HyperscreenVehicles with MBUX Hyperscreen # Press button 1. The hazard warning lights will switch on automati­cally if: R the air bag was deployed. Adaptive functions of the DIGITAL LIGHT ¦Intelligent Light System function With this system, the headlamps adapt to the driv­ing and weather situation. It also provides exten­ded functions for improved illumination of the road. % The availability of the functions is dependent on the country. The system comprises the following functions: R Active headlamps (/ page 139) R Cornering light (/ page 140) R Highway mode (/ page 140) R Enhanced fog light function (/ page 140) R Bad weather light (/ page 141) R City lighting (/ page 141) R Topographical compensation (/ page 141) The system is active only when it is dark. ¦Active headlamps function R The headlamps follow the steering move­ments. R Relevant areas are better illuminated during a journey. The functions are active when the low beam is switched on. Depending on the vehicle's equipment, the course of the lane in which you are driving will also be evaluated and the active headlamps function will adjust the light in advance. ¦Cornering light function The cornering light improves the illumination of the road over a wide angle in the turning direc­tion, enabling better visibility on tight bends, for example. The cornering light will be activated only when low beam is switched on. The function will be active in the following cases: R At speeds below 25 mph (40 km/h) when the turn signal light is switched on or the steering wheel is turned R At speeds between 25 mph (40 km/h) and 43 mph (70 km/h) and when the steering wheel is turned Traffic circle and intersection function: the corner­ing light will be activated on both sides based on an evaluation of the vehicle's current navigation position. It will remain active until after the vehicle has left the traffic circle or intersection. ¦Highway mode function (Canada) Highway mode increases the range and bright­ness of the cone of light, enabling better visibility. The function will be active if a highway journey isdetected by means of:Rthe vehicle's speedRthe multifunction cameraRthe navigation systemThe function is not active in the following cases: R at speeds below 50 mph (80 km/h) ¦Enhanced fog light function (Canada) The enhanced fog light function reduces self-glare and improves the illumination of the edge of the road. The function is automatically activated under thefollowing conditions:RAt speeds below 43 mph (70 km/h) and whenthe rear fog light is switched on.The function is automatically deactivated under the following conditions: R When speeds greater than 62 mph (100 km/h) are reached. R When the rear fog light is switched off. ¦Function of the bad weather light (Canada) The bad weather light reduces reflections in rainy conditions by dimming individual areas of the headlamps. The driver and other road users are dazzled less as a result. ¦The city lighting function (Canada) City lighting improves the illumination of roadsides in urban areas using a broad distribution of light. The function is active in the following cases: R At low speeds R In illuminated parts of urban areas ¦Function of the topographical compensation Based on available map data, the lighting system responds pre-emptively to different road heights. This means that the headlamp range remains vir­tually constant when you are driving on uphill or downhill gradients. % Only vehicles with a multimedia system with navigation have this function. ¦Assistance functions of the DIGITAL LIGHT DIGITAL LIGHT visually expands on the driver assistance systems by projecting the assistant displays in front of the vehicle while it is in motion. DIGITAL LIGHT can therefore help the driver in critical situations. % The availability of the functions is dependent on the country. % The assistance functions of the DIGITAL LIGHT are available on-demand (/ page 27). The system will be active in the following cases: R The light switch is in the Ãposition. R High beam is switched on. % Depending on the country in which you are currently driving, certain functions may be disabled due to different legal requirements, even if they are enabled in the multimedia system. When you cross a border, the vehicle will automatically adapt to the applicable requirements. Spotlight The spotlight function runs in the background and flashes the headlamps in four short bursts at per­sons detected within the lane markings. You will also be made aware of the position of the person by a projected symbol. The function will be active in the following circum­stances: R You are driving outside illuminated areas. R The system detects a lane marking. If Traffic Sign Assist detects a roadworks zone,the system will provide support as follows:RA corresponding symbol will be projected ontothe road when you enter a roadworks zone.Observe the system limitations of Traffic SignAssist (/ page 241).If you fall below the safe distance at speeds of atleast 19 mph (30 km/h), a collision warning sym-bol will be projected onto the road.Observe the system limitations of Active BrakeAssist (/ page 236).During assisted lane changes at speeds of at least19 mph (30 km/h), the course of the lane changewill flash.Observe the system limitations of Active LaneChange Assist (/ page 234).Lane keeping and blind spot warning At speeds of at least 19 mph (30 km/h), a trian­gle that indicates a lane correction and its direc­tion will be projected onto the road in the follow­ing cases: R You leave the lane unintentionally. Observe the system limitations of Active Lane Keeping Assist (/ page 251). R You switch on the turn signal light while an object or obstacle is in your blind spot. Observe the system limitations of Active Blind Spot Assist (/ page 247). ¦Switching the Intelligent Light System on/off Requirements: R The vehicle is switched on. Multimedia system: 4 © 5 Settings 5 Light 5 DIGITAL LIGHT # Activate or deactivate Dynamic Low Beam. Activating or deactivating enhanced assistance functions % The availability of the functions is dependent on the country. % This function is an on-demand feature (/ page 27). # Select Supporting Projections. # Activate or deactivate the desired projections. # Switch Projection for locator lighting/vehicle stop on or off. If the locator lighting or the exterior switch-off delay time is activated, a high-resolution greet­ing or farewell scene will be played back for a short period of time when the vehicle is opened or switched off. You can choose between the Digital Rain and Particle Flow sequences. % More information on locator lighting (/ page 146) More information on the exterior switch-off delay time (/ page 146) Adaptive Highbeam Assist ¦Adaptive Highbeam Assist function & WARNING Risk of accident despite Adap­tive Highbeam Assist Adaptive Highbeam Assist does not react to: R Road users without lights, e.g. pedestrians R Road users with poor lighting, e.g. cyclists R Road users whose lighting is obstructed, e.g. by a barrier On very rare occasions, Adaptive Highbeam Assist may fail to recognize other road users with their own lighting, or may recognize them too late. In these, or in similar situations, the automatic high beam will not be deactivated or will be activated despite the presence of other road users. # Always observe the road and traffic con­ditions carefully and switch off the high beam in good time. Adaptive Highbeam Assist cannot take into account road, weather or traffic conditions. Detection may be restricted in the following cases: R in poor visibility, e.g. fog, heavy rain or snow R if there is dirt on the sensors or the sensors are obscured Adaptive Highbeam Assist is only an aid. You are responsible for adjusting the vehicle's lighting to the prevailing light, visibility and traffic conditions. % Adaptive Highbeam Assist is available on demand (/ page 27). Adaptive Highbeam Assist automatically switches between the following types of light: R Low beam R High beam At speeds greater than 19 mph (30 km/h): R If no other road users are detected, high beam will switch on automatically. The high beam will switch off automatically in the following cases: R At speeds below 16 mph (25 km/h) R If other road users are detected R If street lighting is sufficient % The system's optical sensor is located behind the windshield near the overhead control panel. ¦Switching Adaptive Highbeam Assist on/off Switching on # Turn the light switch to the Ãposition. # Switch on the high beam using the combina­tion switch. If Adaptive Highbeam Assist is activated, the _ indicator lamp will light up on the driver display. Switching off # Switch off the high beam using the combina­tion switch. Adaptive Highbeam Assist Plus ¦Adaptive Highbeam Assist Plus function (Can­ ada) & WARNING Risk of accident despite Adap­tive Highbeam Assist Plus Adaptive Highbeam Assist Plus does not react to: R Road users without lights, e.g. pedestrians R Road users with poor lighting, e.g. cyclists R Road users whose lighting is obstructed, e.g. by a barrier On very rare occasions, Adaptive Highbeam Assist Plus may fail to recognize other road users with their own lighting, or may recognize them too late. In these, or in similar situations, the automatic high beam will not be deactivated or will be activated despite the presence of other road users. # Always observe the road and traffic con­ditions carefully and switch off the high beam in good time. Adaptive Highbeam Assist Plus cannot take into account road, weather or traffic conditions. Detection may be restricted in the following cases: R in poor visibility, e.g. fog, heavy rain or snow R if there is dirt on the sensors or the sensors are obscured Adaptive Highbeam Assist Plus is only an aid. You are responsible for adjusting the vehicle's lighting to the prevailing light, visibility and traffic condi­tions. Adaptive Highbeam Assist Plus automatically switches between the following types of light: R Low beam R Partial high beam R High beam Partial high beam does not include other road users in the high beam area. It does not dazzle them but enables full high-beam illumination for the driver apart from the excluded vehicles. Highly reflective signs are also illuminated with reduced brightness. At speeds below 16 mph (25 km/h) or when there is sufficient street lighting: R Partial high beam and high beam will be switched off automatically. At speeds greater than 19 mph (30 km/h): R If no other road users are detected, high beam will switch on automatically. R If other road users are detected, partial high beam will switch on automatically. % The system's optical sensor is located behind the windshield near the overhead control panel. ¦Switching Adaptive Highbeam Assist Plus on/off (Canada) Switching on # Turn the light switch to the Ãposition. # Switch on high beam using the combination switch. If Adaptive Highbeam Assist Plus is activated, the _ indicator lamp will light up on the driver's display. When partial high beam or high beam is active, the corresponding blue indicator lamp will also light up. Switching off # Switch off high beam using the combination switch. Switching the daytime running lights on/off Multimedia system: 4 © 5 Settings 5 Light 5 DIGITAL LIGHT # Switch the Daytime Running Lights on or off. % In vehicles without DIGITAL LIGHT headlamps, the daytime running lights can be switched on or off in the Driving Lights menu. % The availability of the function is dependent on the country. Setting the exterior lighting switch-off delay time Multimedia system: 4 © 5 Settings 5 Light 5 Interior/Exterior Lighting 5 External Lighting Delay # Set the switch-off delay time. When the vehicle's engine is switched off, the exterior lighting will be activated for the set time. Activating/deactivating the locator lighting Multimedia system: 4 © 5 Settings 5 Light 5 Interior/Exterior Lighting # Activate or deactivate Locator Lighting. When the function is activated, the exterior light­ing will light up for 40 seconds after the vehicle is unlocked or the driver's door is opened when the vehicle is parked and not locked. When you start the vehicle, the locator lighting will be deactivated and the automatic driving lights activated. Adjusting the interior lighting 1 c Switches the front interior lighting on/ off. 2 u Switches the rear interior lighting on/ off. 3 | Switches automatic interior lighting control on/off. # To switch reading lamps on/off: touch respec­tive reading lamp 4 or 5. Operating unit in the rear passenger compartment 1 p Rear passenger compartment reading lamp # To switch on or off: press button 1. Adjusting the ambient lighting Multimedia system: 4 © 5 Comfort 5 Ambient Lighting Setting the color # Select Color. # Select Monochrome or Multi-color. # Set the desired color or color scheme. Energy Shine R The interactive Energy Shine color world shows the different phases during the journey. Depending on the type of driving condition (speed, boost effect or recuperation), this is shown in color by the active ambient lighting. Adjusting the brightness # Select Brightness. # Adjust the brightness. % Depending on the ambient light, the ambient lighting will automatically switch between day and night modes. Activating the brightness for zones # Select Brightness. # Switch off Link Zones . The Direct, Indirect and Accents zones can be set separately. % The Light Band zone can also be set in vehi­cles with active ambient lighting. & WARNING Risk of an accident despite activated effects of ambient lighting and active ambient lighting To use the Warning Assistance effects, the respective functions must be activated in the driver assist menu. # Make sure that the functions and assists are switched on. % Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). # Select Effects. # Activate the desired effect. % Depending on the vehicle equipment, different effects are available. Operating feedback effects R Climate: If changes are made to the tempera­ ture setting in the vehicle, the color of the ambient lighting will change briefly. R Voice Assistant: For vehicles with active ambi­ent lighting, the voice assistant is visually ani­mated. R Interior/Exterior Lighting: When you get into the vehicle, a special color animation will play. R Charging sequence: The ambient lighting pro­vides visual feedback on the different states of charge when the vehicle is connected to or disconnected from the charging station. Warning assistance effects R Warning When Exiting: If an object is detected in the blind spot while you are getting out of the vehicle, the ambient lighting in the affec­ted door will flash red. Further information on the exit warning (/ page 247). R Active Lane Keeping Assist: If there is a warn­ ing from Active Lane Keeping Assist, the active ambient lighting will flash red. Further information on Active Lane Keeping Assist (/ page 251). R Active Brake Assist: If there is an Active Brake Assist warning, the active ambient lighting in the center of the cockpit will flash bright red. Further information on the Active Brake Assist (/ page 236). R Active Blind Spot Assist: In vehicles with active ambient lighting, the ambient lighting on the affected side will flash red if there is a warning from Active Blind Spot Assist. Further information on Active Blind Spot Assist (/ page 247). R Parking Assist PARKTRONIC: The information from the parking sensors during parking maneuvers is displayed in color. Further information on Parking Assist PARKTRONIC: (/ page 260) Multi-color Animation R The chosen color combination will change at predefined intervals. % In vehicles with active ambient lighting, an animation will be played. % The desired operating feedback and warning assistance can be activated or deactivated via the ´ symbol. Depending on the equip­ment, different operating feedback and warn­ing assistance effects are available. % If the brightness is set to a low level, warning animations will be displayed at a higher basic brightness. Switching the interior lighting switch-off delay time on/off Multimedia system: 4 © 5 Settings 5 Light 5 Interior/exterior lighting 5 Interior Lighting Delay # Switch Interior Lighting Delay on or off. If this function is active, the interior lighting will be switched on for a short time after the end of the journey. Switching the windshield wipers on/off 1g Windshield wipers off2Ä Automatic wiping, normal3Å Automatic wiping, frequent4° Continuous wiping, slow5¯ Continuous wiping, fast# Turn the combination switch to the corre­sponding position 1 -5. # Single wipe/washing: push the button on the combination switch in the direction of arrow 1. R íSingle wipe R î Wipes with washer fluid % Observe the notes on washing the vehicle in a car wash (/ page 344). Changing the windshield wiper blades & WARNING Risk of becoming trapped if the windshield wipers are switched on while wiper blades are being replaced If the windshield wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm. # Always switch off the windshield wipers and vehicle before changing the wiper blades. # Switch the vehicle on and then off again immediately. # Within around 15 seconds, press the î button on the combination switch for approx­imately three seconds (/ page 149). The wiper arms will move into the replacement position. Removing the wiper blades # Fold the wiper arms away from the windshield. # Hold the wiper arm with one hand. With the other hand, turn the wiper blade away from the wiper arm in the direction of arrow 1 as far as it will go. # Press release button 2. # Remove the wiper blade from the wiper arm in the direction of arrow 3. Installing the wiper blades # Push the new wiper blade into the wiper arm in the direction of arrow 1 until release knob 2 engages. # Make sure that the wiper blade is seated cor­rectly. # Fold the wiper arms back onto the windshield. # Switch on the vehicle. # Press the î button on the combination switch. The wiper arms will return to their original positions. # Switch off the vehicle. % Check the condition of the wiper blades regu­larly and replace them in the event of visible damage or ongoing smearing. Maintenance display There is a maintenance display at the tip of the newly mounted wiper blade. # Remove protective film 1 from the mainte­nance display. When the color of the maintenance display changes from black to yellow, the wiper blades should be replaced. Operating the outside mirrors & WARNING Risk of accident due to adjust­ing the vehicle settings while the vehicle is in motion You could lose control of the vehicle in the fol­lowing situations in particular: R If you adjust the driver's seat, the head restraint, the steering wheel or the mirror while the vehicle is in motion R If you fasten your seat belt while the vehi­cle is in motion # Before starting the vehicle: in particular, adjust the driver's seat, head restraint, steering wheel and mirror, and fasten your seat belt. & WARNING Risk of accident due to mis­judgment of distance when using the front-passenger mirror The outside mirror on the front passenger side reflects objects on a smaller scale. The objects in view are in fact closer than they appear. # Therefore, always look over your shoul­der to check the actual distance between you and the road users traveling behind you. Adjusting the outside mirrors # Use button 2 or 4 to select the desired mir­ror. # Use button 1 to adjust the position of the selected mirror. Folding the outside mirrors in/out (vehicles with electrically folding outside mirrors) # Briefly press button 3. % If the battery has been disconnected or has discharged, the outside mirrors must be moved briefly using button 3. Only then will the automatic mirror folding function work properly. Engaging the outside mirrors If an outside mirror has been forcibly disengaged, proceed as follows. # Vehicles without electrically folding outside mirrors: manually move the outside mirror into the correct position. # Vehicles with electrically folding outside mir­rors: press and hold button 3. You will hear a click and the mirror will audibly engage. The outside mirror will now be set to the correct position. Automatic anti-glare mirrors function & WARNING Risk of acid burns and poison­ing due to the anti-glare mirror electrolyte Electrolyte may escape if the glass in an auto­matic anti-glare mirror breaks. The electrolyte is hazardous to health and cau­ses irritation. It must not come into contact with your skin, eyes, respiratory organs or clothing or be swallowed. # If you come into contact with electrolyte, observe the following: R Immediately rinse the electrolyte from your skin with water and seek medical attention. R If electrolyte comes into contact with your eyes, immediately rinse them thoroughly with clean water and seek medical attention. R If the electrolyte is swallowed, imme­diately rinse your mouth out thor­oughly. Do not induce vomiting. Seek medical attention immediately. R Immediately change out of clothing which has been contaminated with electrolyte. R If an allergic reaction occurs, seek medical attention immediately. The inside rearview mirror and the outside mirror on the driver's side will automatically go into anti-glare mode if light from a headlamp hits the sen­sor on the inside rearview mirror. System limits The system will not go into anti-glare mode if: R The vehicle is switched off. R Reverse gear is engaged. R The interior lighting is switched on. Front-passenger outside mirror parking position function The parking position makes parking easier. The front-passenger outside mirror will swivel downwards in the direction of the rear wheel on the front passenger's side when: R The parking position is stored (/ page 154). R The front-passenger mirror is selected. R Reverse gear is engaged. The front-passenger outside mirror will move back to its original position when: R You shift the transmission to another transmis­sion position. R You are traveling at a speed greater than 9 mph (15 km/h). R You press the button for the outside mirror on the driver's side. Storing the parking position of the front-passenger outside mirror using reverse gear Storing # Select the front-passenger outside mirror using button 2. # Engage reverse gear. # Move the front-passenger outside mirror into the desired parking position using button 1. Calling up # Select the front-passenger outside mirror using button 2. # Engage reverse gear. The front-passenger outside mirror will move into the stored parking position. Activating/deactivating the automatic mirror fold­ ing function Multimedia system: 4 © 5 Settings 5 Vehicle 5 Opening/closing # Activate or deactivate Automatic Mirror Fold­ing. Radio-controlled equipment such as toll systems can be mounted only on areas 1 of the wind­shield that are permeable to radio waves. Areas permeable to radio waves 1 are best visi­ble from outside the vehicle when the windshield is illuminated with an external light source. Note this position for vehicles with: R Windshield heater R Infra-red reflective windshield The infrared-reflective windshield is coated and reduces the build-up of heat in the vehicle interior. The coating shields the vehicle interior from radio waves. Notes on climate control An interior air filter in combination with the prefil­ter in the engine compartment must always be used so that the air conditioning system, pollution level monitoring and the air filtration work cor­rectly. Use filters recommended and approved by Mercedes-Benz. Always have maintenance work carried out at a qualified specialist workshop. Overview of the THERMATIC climate bar The indicator lamps indicate that the correspond­ing functions are activated. Front climate bar on the central display in vehicles (example) 1 s Increases the temperature 2 Upper display area of the climate bar with the examples of j switching climate control on/off (/ page 159) and 0 synchroniza­tion function (/ page 162) 3 ¬ Defrosts the windshield (/ page 160) 4 ¿ Switches the A/C function on/off (/ page 160) or ¯ Fine particle prefilter status display (/ page 159) 5 ¤ Switches the rear window defroster on/off 6 r Reduces the temperature 7 Depending on vehicle equipment and set­tings: temperature display, display for the defrost function, airflow, pre-entry climate control or climate mode 8 g Switches air-recirculation mode on/off (/ page 162, 163) 9 ± Calls up the air conditioning menu (/ page 159) A à Sets climate control to automatic mode (/ page 160) B J Increases the airflow or switches on cli­mate control (/ page 159) C I Reduces the airflow or switches off cli­mate control(/ page 159) % The climate bar is visible even when the vehi­cle is parked or the air conditioning is switched off (/ page 159). % The availability of individual functions is coun­try- and equipment-dependent. Overview of the THERMOTRONIC climate bar The indicator lamps indicate that the correspond­ing functions are activated. Front climate bar on the central display in vehicles (example) 1 s Increases the temperature 2 Upper display area of the climate bar with the examples of j switching off climate con­trol (/ page 159), g switching air-recir­culation mode on/off (/ page 162, 163) and 0 synchronization function (/ page 162) 3 ¬ Defrosts the windshield 4 ¿ Switches the A/C function on/off (/ page 160) or ¯ Fine particulate prefilter status display (/ page 159) 5 ¤ Switches the rear window defroster on/off 6 Depending on vehicle equipment and set­tings: temperature display, display for pre­entry climate control or climate mode 7 J Increases the airflow or switches on cli­mate control (/ page 159) 8 r Reduces the temperature 9 à Sets climate control to automatic mode, right (/ page 160) A ± Calls up the air conditioning menu (/ page 159) B à Sets climate control to automatic mode, left (/ page 160) C I Reduces the airflow or switches off cli­mate control(/ page 159) % The climate bar will remain visible even when the vehicle is parked or the air conditioning is switched off (/ page 159). Overview of the rear operating unit The rear operating unit is available only for vehi­cles with the THERMOTRONIC air conditioning control panel. Example: USA 1 Sets air distribution to the center and side air vents in the rear passenger compartment, left 2 Sets the temperature in the rear passenger compartment, left 3 Sets the airflow in the rear passenger com­partment, left, or switches climate control on/off (/ page 159) 4 Activates/deactivates climate control (/ page 159) 5 Sets the airflow in the rear passenger com­partment, right, or switches climate control on/off (/ page 159) 6 Sets the temperature in the rear passenger compartment, right 7 Sets air distribution to the center and side air vents in the rear passenger compartment, right 8 Sets rear passenger compartment climate control to automatic mode, right 9 Sets the air distribution to the right rear passenger compartment footwell vents A Synchronization is activated (/ page 162) B Sets the air distribution to the left rear passenger compartment footwell vents C Sets rear passenger compartment climate control to automatic mode, left The settings for the second row of seats can be configured via the rear operating unit or the multi­media system (/ page 162) depending on the vehicle's equipment. Switching climate control on/off Switching on climate control # Set the airflow to level 1 or higher via Jon the climate bar on the central display or # Press Ã, s, ror ±. Switching off climate control # Set the airflow to level 0 via I on the cli­mate bar on the central display or # Press j. If climate control is switched off, the windows may fog up more quickly. Switch climate control off only briefly. % If climate control is switched off via j, OFF will be shown on the climate bar. % When the range maximization function is acti­vated, certain climate control functions are restricted and the window and mirror heaters are switched off. This can lead to windows fogging up and reduced visibility due to weather conditions. To quickly reactivate the climate control functions, press the ¬but­ton on the climate bar on the central display. Switching climate control on/off via the rear oper­ ating unit Switching on # Press button 4. or # Set the airflow to level 1 or higher using but­ tons 3 and 5. or # Press buttons 2, 6, 8 or C. Switching off # Press button 4. or # Set the airflow to level 0 using buttons 3 and 5. % If rear passenger compartment climate con­trol is switched off via button 4, OFF will be shown on the rear passenger compartment display. Activating/deactivating the A/C function via the climate bar The A/C function heats, cools and dehumidifies the vehicle's interior air. # Press ¿ on the climate bar on the central display. % Switch off the A/C function only briefly; oth­erwise, the windows may fog up more quickly. Condensation may drip from the underside of the vehicle when cooling mode is active. This is not indicative of a malfunction. Calling up the air conditioning menu using the cli­ mate bar The air conditioning menu can be called up via the climate bar. The climate bar is always shown on the lower edge of the central display. # Select the Climate Menu entry in the air con­ ditioning line. The First Row of Seats menu is opened. # Select the ¯ fine particle prefilter status display in the air conditioning bar. The Air Quality menu is opened. An animation of the automatic air cleaning taking place is shown. % The fine particle prefilter status display is on the home screen next to the temperature dis­play on the right and it informs you of the cur­rent particulate levels inside and outside of the vehicle. The measurement values are shown with the µg/m3 unit (micrograms per cubic meter). Defrosting the windshield via the climate bar Switching on # Press ¬ on the climate bar on the central display. Switching off # Press ¬, Ãor j on the climate bar on the central display or # set the airflow to 0. % When the defrost function is activated, some functions (e.g. the temperature setting) will automatically be deactivated. Activating/deactivating the A/C function via the air conditioning menu Multimedia system: 4 Climate Menu 5 First Row of Seats Depending on the external conditions, improved cooling and dehumidification of the interior air are supported when the A/C function is activated. If it is not possible to operate the A/C function on the climate bar on the central display, switch the function on or off in the climate menu of the cen­tral display. # Select A/C (A/C). Setting climate control to automatic mode via the climate bar In automatic mode, the set vehicle interior tem­perature is controlled automatically and main­tained at a constant level by the air supply. # Press AUTO on the climate bar on the central display. % You can increase or reduce the airflow by pressing K on the climate bar on the cen­tral display. # To switch to manual operation: switch off automatic mode or adjust an aspect of air dis­tribution, e.g. P. Selecting climate modes via the air conditioning menu Multimedia system: 4 Climate Menu 5 First Row of Seats It is possible to switch between different climate modes on the Climate menu. If ECO or ECO+ mode is activated, certain climate control functions will be restricted to conserve energy and extend the vehicle's range. The following modes are available on the Climate menu: R Comfort: maximum climate comfort R ECO: while heating and cooling output are limited, it remains possible to operate climate control without restriction. If you activate ¬, the system will automatically switch to Comfort mode. R ECO+: mode using only the blower and waste heat, if applicable. The temperature can no longer be adjusted. If you activate ¬, the system will automatically switch to Comfort mode. % The windows may fog up more when ECO or ECO+ mode is activated. % ECO+ climate mode can also be switched on and off via the range maximization button. When the range maximization function is deactivated, the system will automatically switch to the last selected climate mode. Pressing the temperature or blower display on the climate bar of the central display allows direct access to the air conditioning menu when ECO or ECO+ mode is active. The cli­mate mode can be changed by pressing the ECO button. % The vehicle's climate control automatically detects seat occupancy. When the system switches to ECO or ECO+ mode, the climate control functions of the unoccupied seats are further restricted. If you activate ¬, the system will automatically switch to Comfort mode. % If the vehicle is parked in ECO or ECO+ mode, it will automatically switch to Comfort mode the next time it is started. # Tap on ECO. # Select Comfort, ECO or ECO+. If an ECO mode is selected via the air condition­ing menu, two LEDs will appear on the tempera­ture display on the climate bar. When ECO mode is switched on, one LED will light up green on the temperature display. When ECO+ mode is switched on, both LEDs will light up green and the ECO+ display will appear. Setting air distribution using the air conditioning menu Multimedia system: 4 Climate Menu # Select First Row of Seats or Second Row of Seats. # To set the air distribution: select ¯, P or O. # Set the airflow. % When the air conditioning system is switched on, at least one zone is always active. How­ever, several air distribution options can be selected at the same time, for example to set the climate control for the interior and the footwells simultaneously. In doing so, the ¯ climate control for the windshield can only be selected for the first seat row. When automatic mode is active, the buttons for set­ting the air distribution are automatically deactivated. When the air conditioning system is switched off, the buttons remain operable and the last setting is saved. Setting rear climate control using the air condi­ tioning menu Multimedia system: 4 Climate Menu Setting the temperature # Select Second Row of Seats. # Set the temperature. Setting the airflow # Select Second Row of Seats. # Set the air flow with sor r. Controlling the rear climate control automatically # Select AUTO. % When the defrost function is activated, some functions (e.g. the temperature setting) will automatically be deactivated. To deactivate the defrost function, press either ¬, à or j set the air flow to level 0 (/ page 160). Switching the synchronization function on/off via the air conditioning menu Multimedia system: 4 Climate Menu 5 First Row of Seats The synchronization function controls the climate control centrally. The driver's settings for temper­ature, airflow and air distribution are automatically adopted for each climate zone. # Select SYNC (SYNC). Removing condensation from the windows Windows fogged up on the inside # Press à on the climate bar on the central display. # If the windows remain fogged up: press ¬ on the climate bar on the central display. Windows fogged up on the outside # Switch on the windshield wipers. # Press à on the climate bar on the central display. Switching the air-recirculation mode on/off via the air conditioning menu Requirements: R The THERMATIC air conditioning control panel with fine particle prefilter is available. R The THERMOTRONIC air conditioning control panel with or without fine particle prefilter is available. Multimedia system: 4 Climate Menu 5 First Row of Seats # Press g in the upper display area of the climate bar. The interior air will be recirculated. Air-recirculation mode will automatically switch to fresh air mode after a while. % If air-recirculation mode is switched on, the windows may fog up more quickly. Switch on air-recirculation mode only briefly. % By selecting the fine particle status display G on the climate bar, you can jump directly to the air quality menu. Switching air-recirculation mode on/off via the climate bar Requirements: R The THERMATIC air conditioning control panel without fine particle prefilter is available. # Press g on the climate bar on the central display. The interior air will be recirculated. Air-recirculation mode will automatically switch to fresh air mode after a while. % If air-recirculation mode is switched on, the windows may fog up more quickly. Switch on air-recirculation mode only briefly. Activating or deactivating ionization via the air conditioning menu Multimedia system: 4 Climate Menu 5 Air Quality Ionization improves the quality of the vehicle's interior air. Ionization of the interior air is odor­less. # Select Ionization. % The function can be performed only if the AUTO mode is activated or the air distribution is set to the side air vent. The function will be restricted if the side air vent on the driver's side is closed. Fragrance system ¦Activating/deactivating the fragrance system using the multimedia system Requirements: R Automatic climate control is activated. R The glove compartment is closed. R A flacon is inserted. Multimedia system: 4 Climate Menu 5 Air Quality The fragrance system distributes a pleasant fra­grance throughout the vehicle interior from a fla­con located in the glove compartment. # Navigate down until the climate control bar is active. # Select Fragrance. # Activate or deactivate fragrancing. ¦Setting the fragrance system using the multi­ media system Requirements R A flacon is inserted. Multimedia system: 4 Climate Menu 5 Air Quality The fragrance system distributes a pleasant fra­grance throughout the vehicle interior from a fla­con located in the glove box. # Select Fragrance. # Keep pressing until the desired intensity is reached. ¦Inserting or removing the flacon of the fra­ grance system & WARNING Risk of injury from liquid per­fume If children open the flacon, they could drink the liquid perfume or it could come into con­tact with their eyes. # Do not leave children unattended in the vehicle. # Consult a doctor immediately if liquid perfume has been drunk. # If liquid perfume comes into contact with your eyes or skin, rinse your eyes with clean water. # If symptoms continue, consult a doctor. + ENVIRONMENTAL NOTE Environmental damage due to improper disposal of full flacons Full flacons must not be disposed of with household waste. # Full flacons must be taken to a harmful substance collection point. 1 Cap 2 Flacon # To insert: slide the flacon into the holder as far as it will go. # To remove: after opening the glove box, wait for approximately seven seconds and pull out the flacon. If you do not use genuine Mercedes-Benz interior perfumes, observe the manufacturers' safety noti­ces on the perfume packaging. Dispose of the genuine Mercedes-Benz interior perfume flacon when it is empty and do not refill it. Refillable flacon # Unscrew the cap of the empty flacon. # Fill the flacon with a maximum of 0.5 fl. oz. (15 ml). # Screw the cap back onto the flacon. Always refill the empty refillable flacon with the same perfume. Observe the separate information sheet with the flacon. Information on the windshield heater & WARNING Risk of burns from touching the windshield when the windshield heater is switched on The windshield can become very hot when the windshield heater is switched on. The health of persons with limited temperature sensitivity or a limited ability to react to high temperatures may be affected or they may even suffer burn-like injuries. # Do not touch the windshield while the windshield heater is switched on. # Allow the windshield to cool down before touching it. The windshield heater will be enabled automati­cally if ¬ is activated on the climate bar on the central display. After the vehicle is started, the windshield heater will be switched on automatically as required. % If the on-board electrical system voltage is low, the function of the windshield heater may be impaired. Pre-entry climate control when the vehicle is unlocked ¦Function of pre-entry climate control when the vehicle is unlocked The seats can be briefly pre-warmed or pre­ cooled before you get into the vehicle. Depending on the vehicle's equipment, the follow­ing functions will be activated as needed during pre-cooling: R Automatic climate control R Blower R Seat ventilation Depending on the vehicle's equipment, the follow­ing functions will be activated as needed during pre-warming: R Automatic climate control R Blower R Seat heating R Steering wheel heater R Mirror heater R Rear window defroster Depending on the vehicle's equipment, the follow­ing functions will also be adjusted during pre­entry climate control if they have already been switched on during regular vehicle operation: R Fragrancing R Ionization ¦Setting pre-entry climate control when the vehi­ cle is unlocked in the multimedia system Multimedia system: 4 Climate Menu 5 Pre-entry Climate Ctrl. # Activate or deactivate the function. Selecting seats # Select Driver, Passenger, Rear Left or Rear Right. The seat-specific functions of pre-entry cli­ mate control, such as seat heating, will be per­ formed for the selected seats. If pre-entry climate control is enabled, an LED on the climate bar of the central display will light up blue for a cooled vehicle and red for a heated vehicle. ¦Activating/deactivating pre-entry climate con­ trol when the vehicle is unlocked Requirements R The high-voltage battery is charged suffi­ciently. R The function has been activated via the multi­media system. # To switch on: unlock the vehicle. The climate control functions are activated for up to five minutes for pre-heating and pre­ cooling. Pre-entry climate control via unlocking cannot be activated more than three times in succession when the vehicle is switched off. # To switch off: press & on the climate bar on the central display. The following functions will remain active once the vehicle has been started: R Seat heating R Seat ventilation Depending on the vehicle's equipment, the follow­ing functions will also be adjusted during pre­entry climate control if they have already been switched on during regular vehicle operation: R Fragrancing R Ionization Pre-entry climate control for departure time ¦Pre-entry climate control for departure time function & WARNING Risk of fatal injury due to expo­sure to extreme heat or cold in the vehicle If persons, particularly children, are subjected to prolonged exposure to intense heat or cold, there is a risk of severe injury or even death. # Never leave persons, particularly chil­dren, unattended in the vehicle. & WARNING Risk of burns due to repeatedly switching on the seat heating Repeatedly switching on the seat heating can cause the seat cushion and seat backrest pad­ding to become very hot. In particular, the health of persons with limited temperature sensitivity or a limited ability to react to high temperatures may be affected or they may even suffer burn-like injuries. # Do not repeatedly switch on the seat heating. To protect against overheating, the seat heating may be temporarily deactivated after it has been switched on repeatedly. The air inside the vehicle can be heated, ventila­ted or cooled to the set temperature when the vehicle is parked. When the vehicle is connected to power supply equipment, priority will be given to charging the high-voltage battery to a specified minimum charge. The running time of pre-entry climate control may be reduced in the following circumstances: R The vehicle is not connected to power supply equipment. R The high-voltage battery is not fully charged. With active pre-entry climate control, the charge level of the high-voltage battery may be reduced, even if the charging cable connector is connec­ted. If present, seat ventilation will be activated in cooling and ventilation modes. If present, the following functions will be activated in heating mode: R Seat heating R Steering wheel heater R Mirror heater R Rear window defroster R Windshield heater When the set temperature is changed, the climate control mode will automatically be updated. It will be switched from heating mode to ventilation or cooling mode, from cooling mode to ventilation or heating mode or from ventilation mode to heating or cooling mode. Depending on the vehicle's equipment, the follow­ing functions will also be adjusted during pre­entry climate control if they have already been switched on during regular vehicle operation: R Fragrancing R Ionization ¦Setting pre-entry climate control for departure time via the climate bar Multimedia system: 4 Climate Menu 5 Pre-entry Climate Ctrl. Setting the departure time % The set departure times are used for the vehi­cle's pre-entry climate control and for predic­tions regarding the approximate state of charge and range at the time selected. Addi­tional information on the charging settings (/ page 203). # Select Edit Departure Time u. # Select a departure time or set a new depar­ture time. % If the range maximization function is activa­ted, an approximate time for reaching the desired state of charge will be determined automatically during a charging stop. This is used as an approximate departure time for pre-entry climate control and is set automati­cally. Departure times previously set cannot be edited when the function is switched on. The automatically determined departure time can be activated or deactivated via the air conditioning menu. Setting the repeat days # Select Edit Departure Time u. # Set the desired departure time and select the corresponding weekdays on which this depar­ture time is to apply. # Press OK to confirm. Selecting seats # Select Driver, Passenger, Rear Left or Rear Right. Pre-entry climate control will take place for the selected seats. If a departure time is set, a yellow LED will appear on the climate bar of the central display. In addi­tion, an LED on the climate bar will indicate when pre-entry climate control is activated. It will light up blue when the vehicle is being cooled and red when it is being heated. ¦Activating/deactivating pre-entry climate con­ trol for departure time Requirements: R The high-voltage battery is charged suffi­ciently. R The function has been activated via the multi­media system. # To activate: set the departure time (/ page 167). Pre-entry climate control for departure time will switch on a maximum of 55 minutes before the selected departure time. It will remain active for another five minutes if depar­ture is delayed. # To deactivate the pre-entry climate control for departure time early: press & on the cli­mate bar on the central display or switch off the preselection of the time in the climate menu. If present, the following functions will remain active once the vehicle has been started: R Seat heating R Seat ventilation Depending on the vehicle's equipment, the follow­ing functions will also be adjusted during pre­entry climate control if they have already been switched on during regular vehicle operation: R Fragrancing R Ionization Operating immediate pre-entry climate control via the climate bar & WARNING Risk of fatal injury due to expo­sure to extreme heat or cold in the vehicle If persons, particularly children, are subjected to prolonged exposure to intense heat or cold, there is a risk of severe injury or even death. # Never leave persons, particularly chil­dren, unattended in the vehicle. & WARNING Risk of burns due to repeatedly switching on the seat heating Repeatedly switching on the seat heating can cause the seat cushion and seat backrest pad­ding to become very hot. In particular, the health of persons with limited temperature sensitivity or a limited ability to react to high temperatures may be affected or they may even suffer burn-like injuries. # Do not repeatedly switch on the seat heating. To protect against overheating, the seat heating may be temporarily deactivated after it has been switched on repeatedly. Requirements R The vehicle is switched off. Air conditioning of the vehicle interior can con­tinue for up to 50 minutes, e.g. if the journey is interrupted. # Press the & button on the climate bar on the central display. # Set the temperature using the arrows sor r on the climate bar on the central dis­play. An LED on the climate bar on the central display indicates when pre-entry climate control is activa­ted. It lights up blue when the vehicle is being cooled and red when it is being heated. Air vents ¦Adjusting the front air vents & WARNING Risk of burns or frostbite due to being too close to the air vents Very hot or very cold air can flow from the air vents. # Make sure that all vehicle occupants always maintain a sufficient distance from the air vents. # If necessary, direct the airflow to another area of the vehicle interior. To guarantee the flow of fresh air through the air vents into the vehicle interior, note the following: R Always keep the vents and ventilation grilles in the vehicle interior clear. R Keep the air inlet grilles free of residue build­up (/ page 344). #To open or close the side air vents: hold theouter ring of side air vent 1 and turn it to theleft or right as far as it will go.#To open or close the center air vent: movecontroller 2 inwards or outwards as far as itwill go.# To adjust the airflow direction of the side air vents: hold the center of side air vent 1 and move it up or down or to the left or right. # To adjust the airflow direction of the center air vent: hold the controller of center air vent 2 and move it up or down or to the left or right. ¦Adjusting the rear passenger compartment air vents & WARNING Risk of burns or frostbite due to being too close to the air vents Very hot or very cold air can flow from the air vents. # Make sure that all vehicle occupants always maintain a sufficient distance from the air vents. # If necessary, direct the airflow to another area of the vehicle interior. # To open or close the rear passenger compart­ment air vents: hold the controller of rear passenger compartment air vent 1 and move it inwards or outwards as far as it will go. # To set the airflow direction of the rear passenger compartment air vents: hold con­troller 1 and move it up or down or to the left or right. Notes on Mercedes-AMG vehicles Observe the notes on the following topics in the Supplement, otherwise you may fail to recognize dangers. % The availability of certain functions depends on the equipment and model of the vehicle. R AMG Active Sound R AMG ceramic high-performance composite brake system R RACE START R AMG RIDE CONTROL + R AMG steering-wheel buttons Notes on electric mode & WARNING Risk of chemical burns and poi­soning from damaged high-voltage battery If the housing of the high-voltage battery has been damaged, electrolyte and gases may leak out. # Avoid contact with the skin, eyes or clothing. # Immediately rinse electrolyte splashes off with water and seek medical atten­tion straight away. & DANGER Risk of fire and explosion from excessive internal pressure of the high-voltage battery In the event of a vehicle fire, flammable gas can escape and ignite. # If there is an unusual smell, smoke or burn marks, stop the charging process immediately. # Leave the danger zone immediately. Secure the danger area at a sufficient distance. # Call the fire service. Observe the following notes on vehicle noise emissions and the acoustic vehicle alert system: R The vehicle is equipped with a purely electric drive system and produces considerably lower stationary and vehicle noise emissions than vehicles with a combustion engine. It is for this reason that the vehicle is equip­ped with a sound generator, which serves as an acoustic vehicle alert system (AVAS). R The sound generator generates stationary noise and speed-dependent vehicle noise emissions when the vehicle is driving forwards or reversing at a speed of up to around 25 mph (30 km/h) This helps other road users, particularly pedestrians and cyclists, to hear your vehicle better. R When you drive at speeds above 20 mph (20 km/h) the acoustic vehicle alert system will gradually switch off. R Despite the sound generator, the vehicle still may not be heard by other road users. Adapt your driving style accordingly. Manual disconnection of the high-voltage on-board electrical system & DANGER Risk of death and fire due to modified and/or damaged components of the high-voltage on-board electrical sys­tem The vehicle's high-voltage on-board electrical system is under high voltage. If you modify component parts in the vehicle's high-voltage on-board electrical system or touch damaged component parts, you may be electrocuted. In addition, modified and/or damaged compo­nents may cause a fire. In the event of an accident or impact to the vehicle underbody, components of the high-voltage electrical system may be damaged although the damage is not visible. # Never make any modifications to the high-voltage on-board electrical system. # Do not switch on or use the vehicle if its high-voltage on-board electrical system components have been modified or dam­ aged. # Never touch damaged components of the high-voltage on-board electrical sys­tem. # After an accident, do not touch any com­ponents of the high-voltage on-board electrical system. # After an accident, have the vehicle trans­ported away. # Have the components of the high-voltage on-board electrical system checked at a qualified specialist workshop and replaced if necessary. Requirements: Only disconnect the high-voltage on-board electri­cal system manually in the following situations: R The restraint system warning lamp 6lights up on the driver's display, e.g. after an acci­dent. R The vehicle is badly damaged, e.g. after an accident, and the restraint system compo­nents have not been triggered. Operating the high-voltage disconnect device Only disconnect the high-voltage on-board electri­cal system manually in the above-mentioned sit­uations. # Switch off the vehicle. # Shift the transmission to position j. # Apply the electric parking brake. # Secure the vehicle against rolling away. #Remove flap1 of the fuse box in the frontpassenger footwell.# Press release tab 3 on high-voltage discon­nect device 2 in the direction of the arrow and pull it out. # Pull connector 4 in the direction of the arrow until it engages. The high-voltage on-board electrical system is switched off. All work on the drive system (including after dis­connecting the high-voltage on-board electrical system manually) may only be carried out in a qualified specialist workshop. Switching on the power supply or the vehicle & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. Requirements R the key is in the vehicle and is detected. R the brake pedal is not depressed. Vehicles with central display Vehicles with MBUX Hyperscreen # To switch on the power supply: press button 1 once. You can, for example, switch on the windshield wiper. The power supply is switched off again if the fol­lowing conditions are met: R you open the driver's door. R you press button 1 twice more. # To switch on the vehicle: press button 1 twice. Indicator and warning lamps light up on the driver's display. The vehicle is switched off again if one of the fol­lowing conditions is met: R you do not start the vehicle within 15 minutes and the transmission is in position j or the electric parking brake is applied. R you press button 1 once. Starting the vehicle ¦Starting the vehicle with the start/stop button Requirements: R The key is in the vehicle and is recognized. # Shift the transmission to position j or i. # Depress the brake pedal and press button 1 once. R The vehicle is started. R The õ display appears on the driver's display: the vehicle can be driven. # If the vehicle does not start: switch off non­essential consumers and press button 1 once. # If the vehicle still does not start and the Place the Key in the Marked Space See Operator's Manual display message appears on the driv­er's display: start the vehicle with the key in the marked space (emergency operation mode) (/ page 175). % You can switch off the vehicle while driving. To do this, press button 1 for about three sec­onds or press button 1 three times within three seconds. The transmission will shift to neutral i automatically. When you press but­ton 1 again, the vehicle will start again and you can engage drive position h again. Be sure to observe the safety notes concerning this under "Driving tips" (/ page 176). Observe any information regarding display mes­sages that may be displayed on the driver's dis­play. ¦Starting the vehicle with the key in the marked space (emergency operation mode) If the vehicle does not start and the Place the Key in the Marked Space See Operator's Manual display message appears on the driver's display, you can start the vehicle in emergency operation mode. # Make sure that marked space 2 is empty. # Remove key 1 from the key ring. # Place key 1 in marked space 2 on the sym­ bol. The vehicle will start after a short time. When you remove key 1 from marked space 2, the vehicle can still be driven. For further engine starts however, key 1 must be loca­ted in marked space 2 on the symbol during the entire journey. # Have key 1 checked at a qualified specialist workshop. If the vehicle does not start: # Place key 1 in marked space 2 and leave it there. # Depress the brake pedal and start the vehicle using the start/stop button. % You can switch on the power supply or the vehicle with the start/stop button. Observe any information regarding display mes­sages that may be displayed on the driver's dis­play. Breaking-in notes R In certain driving and driving safety systems, the sensors adjust automatically while a cer­tain distance is being driven after the vehicle has been delivered or after repairs. Full sys­tem effectiveness is not reached until the end of this teach-in process. R Brake pads, brake disks and tires that are either new or have been replaced only achieve optimum braking effect and grip after several hundred kilometers of driving. Compensate for the reduced braking effect by applying greater force to the brake pedal. Notes on acceleration increase % Acceleration increase is not available for all models and versions. % This function is an on-demand feature (/ page 27). When the function is activated, a higher maximum power is available for the vehicle and the acceler­ation characteristics are improved. This does not change the maximum design speed of the vehicle. Due to the increased power, there may be changes in the electric range. Notes on driving & WARNING Risk of accident due to objects in the driver's footwell Objects in the driver's footwell may impede pedal travel or block a depressed pedal. This jeopardizes the operating and road safety of the vehicle. # Stow all objects in the vehicle securely so that they cannot get into the driver's footwell. # Always install the floor mats securely and as prescribed in order to ensure that there is always sufficient room for the pedals. # Do not use loose floor mats and do not place floor mats on top of one another. & WARNING Risk of accident due to incor­rect footwear Incorrect footwear includes, for example: R Shoes with platform soles R Shoes with high heels R Slippers There is a risk of an accident. # Always wear suitable footwear so that you can operate the pedals safely. & WARNING Risk of accident if the vehicle is switched off while driving If you switch off the vehicle while driving, safety functions are restricted or no longer available. This may affect the power steering system and the brake force boosting, for example. You will need to use considerably more force to steer and brake, for example. # Do not switch off the vehicle while driv­ing. & WARNING Risk of accident and injury due to being under the influence of alcohol and drugs while driving Drinking and driving and/or taking drugs and driving are very dangerous combinations. Even a small amount of alcohol or drugs can affect your reflexes, perceptions and judgment. The possibility of a serious or even fatal acci­dent are greatly increased when you drink or take drugs and drive. # Do not drink or take drugs and drive or allow anyone to drive who has been drinking or taking drugs. & WARNING Risk of accident due to the brake system overheating If you leave your foot on the brake pedal when driving, the brake system may overheat. This increases the braking distance and the brake system can even fail. # Never use the brake pedal as a footrest. # Do not depress the brake pedal and the accelerator pedal at the same time while driving. * NOTE Damage to the vehicle due to not observing the maximum permitted head­room clearance If the vehicle height is greater than the maxi­mum permitted headroom clearance, the roof and other parts of the vehicle may be dam­aged. # Observe the signposted headroom clear­ance. # If the vehicle height is greater than the permitted headroom clearance, do not enter. # Observe the changed vehicle height with add-on roof equipment. Notes on driving with a roof load, trailer or fully laden vehicle When you drive with a loaded roof luggage rack or trailer as well as with a fully laden or fully occu­ pied vehicle, the vehicle's driving and steering characteristics will change. You should bear the following in mind: R Do not exceed the permissible roof load and towing capacity. Also observe the technical data in the printed Operator's Manual. R Evenly distribute the roof load, and place heavy objects at the bottom. Also comply with the notes on loading the vehicle (/ page 119). R Drive attentively, and avoid suddenly pulling away, braking and steering as well as rapid cornering. Notes on driving on salt-treated roads Braking performance will be limited on salt-trea­ ted roads. Therefore, observe the following notes: R due to salt build-up on the brake disks and brakepads, braking distances can increase considerably or result in braking only on one side R maintain a much greater safe distance to the vehicle in front To remove salt build-up: R brake occasionally while paying attention to the traffic conditions R carefully depress the brake pedal at the end of the journey and when starting the next jour­ney Notes on hydroplaning Hydroplaning can take place once a certain amount of water has accumulated on the road surface. Observe the following notes during heavy precipi­tation or in conditions in which hydroplaning may occur: R reduce speed R avoid tire ruts R avoid sudden steering movements R brake carefully % Also observe the notes on regularly checking wheels and tires (/ page 370). Notes on fording Water that has entered the vehicle can damage the drive system, electrics and transmission. Observe the following if you must drive through water: R The water, when calm, must reach no higher than the lower edge of the vehicle body. R Drive at walking pace at most; water may oth­erwise enter the vehicle interior. R Vehicles traveling in front, or oncoming vehi­cles, can create waves that may exceed the maximum permissible depth of the water. Braking performance will be reduced after ford­ing. Brake carefully while paying attention to the traffic conditions until braking performance has been fully restored. Function of rear axle steering % This function is an on-demand feature (/ page 27). The rear axle steering is an electromechanical auxiliary steering on the rear axle which adjusts the steering of the rear wheels according to the position of the front wheels, depending on the speed. This results in greater maneuverability and improved driving stability, e.g. when cornering. Rear axle steering has the following characteris­tics: R Reduced steering effort and turning radius resulting in reduced parking effort R Improved driving stability, e.g. when cornering R More direct steering resulting in improved handling of the vehicle Observe the notes on snow chains and snow chain mode (/ page 371). ECO display function The ECO display shows an evaluation of your driv-ing style on the driver's display depending on thesituation. This enables you to check the efficiency of your driving style and adjust it if necessary. The ECO Display menu shows a ball 2 that will roll forwards or backwards on a stylized road in the direction of travel according to the driving charac­teristics. Above and below the road, lines mark the area for an efficient driving style 3. Ball 2 will light up in green if it is rolling within these lines. Outside the lines, the ball will light up in orange. The ECO display assesses the following criteria for an economical driving style: R Coasting at the right times R Consistent speed R Moderate acceleration The overall assessment of your driving style "from start" is indicated using stars 1. It starts with five empty stars, which you can fill one after the other if you drive efficiently. When all five stars are filled, a glow will appear in the background. % You can call up the ECO Display function via the Classic menu (/ page 282). Recuperative brake system ¦Function of the recuperative brake system Depending on the selected recuperation level, the electric motors are operated as an alternator when in overrun mode and during braking in order to charge the high-voltage battery while driving. As soon as you take your foot off the accelerator pedal when the vehicle is in motion and in trans­mission position h, recuperation in overrun mode is initiated. The higher the recuperation, the more sharply the vehicle is braked when coasting and the more electrical energy is fed into the high-voltage bat­tery. The deceleration in overrun mode may not be suf­ficient depending on the driving conditions. Also brake with the service brake if necessary. Always adapt your speed to the driving conditions and keep a sufficient distance. The recuperative brake system has the following characteristics: R supports braking with electronically controlled brake force boosting % If you brake hard, the mechanical brake is also used. This means that the maximum recuperative energy cannot be recovered. The more you drive and brake in an anticipatory manner, the more efficiently energy can be recuperated. System limits The braking effect of the electric motor during recuperation in overrun mode may be reduced or may not be available at all in the following situa­tions: R when the high-voltage battery charge level increases R if the high-voltage battery is not yet at a nor­mal operating temperature In these cases, the desired deceleration is set by the brake control system. ¦Manually setting recuperative deceleration You can use the steering wheel paddle shifters to manually adjust the intensity of recuperation in overrun mode. %When the vehicle is started again, h is auto-matically set as the recuperation level.The following recuperation levels are available: R hà Intelligent and anticipatory recupera­tion with ECO Assist (/ page 181) R hq No recuperation: the vehicle coasts, rolls freely R h Normal recuperation (standard setting) R h± Increased recuperation: increased deceleration in overrun mode # To increase recuperation: briefly pull paddle shifter 1. # To reduce recuperation: briefly pull paddle shifter 2. # To select hÃ: pull and hold paddle shifter 1 or 2. The driver's display shows the currently set recu­peration level next to the transmission position display. ECO Assist ¦ECO Assist function ECO Assist is only an aid. It is not a substitute for you paying attention to your surroundings and does not relieve you of your responsibility pertain­ing to road traffic law. The driver is responsible for keeping a safe distance from the vehicle in front, for vehicle speed and for braking in good time. & WARNING Risk of accident if ECO Assist does not provide sufficient deceleration ECO Assist only brakes your vehicle when you take your foot off the gas pedal. If vehicles are detected late, e.g. after tight curves, or if you do not react immediately to the ECO Assist display, the deceleration may not be sufficient. # React promptly to the ECO Assist recom­mendation and take your foot off the gas pedal. # Adjust your speed to the driving condi­tions and maintain a suitable distance from the vehicle in front. # Brake the vehicle yourself and/or take evasive action. ECO Assist is active only in hà (/ page 180). Depending on the vehicle's equipment, ECO Assist analyzes data for the vehicle's expected route. This allows the system to optimally adjust the driving style for the route ahead, use minimal energy and recuperate as much as possible. If the system has detected an event ahead or a vehicle in front and the vehicle is approaching the event, ECO Assist will calculate an optimized speed pro­file based on the distance, speed and available route information. If you release the accelerator pedal in this case, intelligent recuperation will start in overrun mode. If ECO Assist has detected a vehicle traveling in front or a stationary vehicle ahead, it can brake your vehicle to a standstill. This may be the case, for example, at the end of a traffic jam or if the detected vehicle ahead stops in front of you. If the deceleration provided by ECO Assist is not sufficient, you must also brake with the service brake. This applies in particular if, for example, you pull back into traffic and the distance to the vehicle in front is very short. Depending on the vehicle equipment and at low speeds, e.g. in a parking garage or on play streets, no adjustment is made for stationary vehicles and therefore there is no display. 1"Foot off the accelerator" recommendation2Route event ahead%ECO Assist can also be shown on the head-updisplay.If a route event that requires an adjustment ofyour driving style is detected ahead, correspond-ing symbol 2 and the ý symbol (gray) will be displayed. If you release the accelerator pedal, the ý symbol will turn green and recuperation in over­run mode will be initiated. If the deceleration is not sufficient, also apply the service brake. The ECO Assist display is hidden again in the fol­lowing cases: R You do not react to the ECO Assist recommen­dation for a long time. R ECO Assist cannot identify any further recom­mendations from the route ahead. In addition to a vehicle in front ¥, ECO Assist can detect the following route events 2 depend­ing on the vehicle's equipment: ~ Roundabout ¡ S-curve ¢ Sharp curve £ T-intersection ¤ Downhill gradient ¦ Speed limit ECO Assist can also react to other intersections or junctions if you activate the turn signal indica­tor in good time. % On roads with an obligation to drive in a lane as far to the right as possible, vehicles driving in the lane to your left will also be recognized as vehicles ahead of you. To enable ECO Assist to react to future route events, the equipment-dependent speed adapta­tion functions of Active Distance Assist must be active (/ page 229). System limits If the calculated route is adhered to when route guidance is active, ECO Assist will operate with greater accuracy. The basic function is also availa­ble without active route guidance. Not all informa­tion and traffic situations can be foreseen. The quality depends on the map data. % ECO Assist will be available after driving off, as soon as the sensor check is completed. The system may be impaired or may not function in the following situations: R If there is poor visibility, e.g. due to insufficient illumination of the road, highly variable shade conditions, rain, snow, fog or heavy spray. R If there is glare, e.g. from oncoming traffic, direct sunlight or reflections. R If the windshield is dirty in the vicinity of the multifunction camera. R If the multifunction camera is fogged up, dam­aged or obscured. R If road signs are hard to detect, e.g. due to dirt, snow or insufficient lighting, or because they are obscured. R If the information in the navigation system's digital map is incorrect or out of date. R If signs are ambiguous, e.g. road signs in road­works or in adjacent lanes. R If the radar sensors are dirty or obscured. R When you drive on roads with steep uphill or downhill gradients. R If there are narrow vehicles in front, such as bicycles or motorcycles. ¦Activating and deactivating ECO Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Driving # Activate or deactivate the function. Function of the haptic accelerator pedal The haptic accelerator pedal features an addi­tional point of resistance to help you drive as effi­ciently as possible in drive program ;. Range maximization ¦Range maximization function The range maximization function enables a maxi­mum range gain. To achieve this, the function par­tially or completely switches off convenience sys­tems that are not relevant to driving and activates efficiency-enhancing driving functions. The range maximization function controls the restrictions of the following function groups: R Climate control -Restricting climate control functions and deactivating front windshield, rear window and mirror heating R Interior -Switching off ambient lighting, displays and certain charging functions R Seating comfort -Deactivating the steering wheel heater, seat heating and ventilation and deactivat­ing the massage function R ECO drive functions -Changing to the ; drive program, acti­vating ECO Assist and the hà recu­peration level If necessary, you can deactivate the restrictions of individual function groups again. This will reduce the maximum range gain by the value specified for the function group. If you switch on a deactivated function while range maximization is activated, all restrictions of the corresponding function group will be removed and the maximum range gain will be reduced accordingly. For example, if you switch on the seat heating again, all restrictions of the "Seating comfort" function group will be deactivated. This does not apply to the "ECO driving functions" group, as the range gain in this case depends mainly on your personal driving style. The activa­ted ECO driving functions help you to drive in an energy-efficient manner. The specified range gain for the ECO drive functions can be achieved only if you observe the driving instructions and recom­mendations displayed and drive without kickdown. ¦Activating/deactivating range maximisation Multimedia system: 4 © 5 Settings 5 EQ 5 Range # Activate or deactivate Maximum Range. All function groups concerned will be activa­ted or deactivated. or # Individually activate or deactivate the individ­ual subsystems of the four function groups Cli­mate Control, Interior, Seat Comfort and ECO Driving Functions. Function of the DYNAMIC SELECT button * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. You can switch between the drive programs with the DYNAMIC SELECT button (/ page 185). Depending on the drive program selected, the fol­lowing vehicle characteristics will change: R Drive R Vehicles with AIRMATIC: suspension (/ page 253) -Suspension and damping -Vehicle level (speed-dependent) R Steering R ESP® R Sound of the drive system in the vehicle inte­ rior R Point of resistance on the haptic accelerator pedal % In drive program ;, an additional pressure point is activated in the haptic accelerator pedal. R First point of resistance: at approx. 60% pedal travel (only in ;) R Second point of resistance: transition to kickdown (always available) Available drive programs =(Individual) R The following vehicle characteristics are indi­vidually adjustable: -Drive -Suspension -Steering -ESP® -Sound of the drive system in the vehicle interior C (Sport) R Sporty and dynamic driving characteristics R Only suitable for good road conditions, a dry road surface and a clear stretch of road A (Comfort) R Comfortable driving style R Recommended for all road conditions R Best balance between efficiency and perform­ ance for all driving situations ;(Eco) R Economical setting of vehicle functions R Recommended for all road conditions R Additional first point of resistance in the hap- tic accelerator pedal indicates an efficient, economical driving style The ESP® settings in the drive programs ; and A are designed for stability. Therefore, choose one of these drive programs especially when transporting roof loads, in trailer operation and when the vehicle is fully loaded or fully occu­pied. Selecting the drive program # Press DYNAMIC SELECT button 1 on the left or right. The drive program selected appears on the driver's display. Configuring DYNAMIC SELECT (multimedia sys­ tem) Multimedia system: 4 © 5 Settings 5 Vehicle 5 DYNAMIC SELECT Setting drive program I # Select = Individual. # Select and set a category. Switching the reset display on/off # Switch Request at Start on or off . % This function must be activated for each user profile separately. The drive program for the respective user profile of the last driver is only stored if this function is activated. Function on: the next time the vehicle is started a prompt appears asking whether the last active drive program should be restored. % The prompt only appears if the previously active settings deviate from the standard set­tings. Function off: the next time the vehicle is started the A drive program is set automatically. Displaying vehicle data Multimedia system: 4 © 5 Info # Select Vehicle. The vehicle data is displayed. Calling up the fuel consumption indicator Multimedia system: 4 © 5 EQ # Select Consumption. The current and average fuel consumption will be displayed. DIRECT SELECT lever ¦Function of the DIRECT SELECT lever & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. Use the DIRECT SELECT lever to switch the trans­mission position. The current transmission posi­tion will be shown on the driver's display. j Park position k Reverse gear i Neutral h Drive position ¦Engaging reverse gear R # Depress the brake pedal and push the DIRECT SELECT lever upwards past the first point of resistance. ¦Engaging neutral N # Depress the brake pedal and push the DIRECT SELECT lever up or down to the first point of resistance, holding it there until transmission position i is shown on the driver's display. Subsequently releasing the brake pedal will allow you to move the vehicle freely, e.g. to push it or tow it away. If you want the transmission to remain in neutral N even if the vehicle is switched off: # Start the vehicle. # Depress the brake pedal and engage neutral i. # Release the brake pedal. # Switch off the vehicle. % If you then exit the vehicle leaving the key in the vehicle, the transmission will remain in neutral i. ¦Engaging park position P * NOTE Damage due to engaging park posi­tion j while the vehicle is rolling If you shift the transmission into park position j while the vehicle is rolling, the transmis­sion may be damaged. # If the vehicle is rolling, do not open a door. # Only engage park position j when the vehicle is stationary. # Observe the notes on parking the vehicle (/ page 204). # Depress the brake pedal until the vehicle comes to a standstill. # When the vehicle is stationary, press the j button. When the transmission position display shows j, the park position is engaged. If the trans­mission position display j is not shown, apply the parking brake and secure the vehicle to prevent it from rolling away. % Depending on the situation, it may take a short time until j is engaged. Therefore, always pay attention to the transmission posi­tion display. Park position j is engaged automatically if one of the following conditions is met: R You switch the stationary vehicle off in trans­mission position h or k. R You open the driver's door when the vehicle is stationary in transmission position h or k. R When the vehicle is rolling, you switch if off in transmission position h or k and bring it to a standstill. R When the vehicle is rolling, you shift to trans­mission position i, bring the vehicle to a standstill and open the driver's door when the vehicle is stationary. R Engaging park position j automatically is required by the vehicle. % Park position j can be engaged automati­cally when the vehicle is rolling very slowly. % To maneuver with an open driver's door, open the driver's door while stationary and engage transmission position h or k again. ¦Engaging drive position D # Depress the brake pedal and push the DIRECT SELECT lever down past the first point of resistance. The flexible all-wheel distribution of the 4MATIC means the drive is always ideally distributed between both axles. Depending on the situation, only the front axle or only the rear axle can be driven, or the drive can be distributed continu­ously between both axles. This means that recuperation can be used even more effectively and the range of the vehicle can be increased (/ page 179). Together with ESP® and 4ETS, 4MATIC improves the traction of your vehicle whenever a driven wheel spins due to insufficient traction. If you fail to adapt your driving style, 4MATIC can neither reduce the risk of an accident nor override the laws of physics. It cannot take into account road, weather or traffic conditions. 4MATIC is only an aid. You are responsible especially for main­taining a safe distance from the vehicle in front, for vehicle speed, for braking in good time and for staying in lane. % In wintry road conditions, the maximum effect of the flexible all-wheel distribution can be achieved only if you use winter tires (M+S tires), with snow chains if necessary. Notes on charging the high-voltage battery * NOTE High-voltage battery damage due to leaving the vehicle idle for lengthy periods of time Lithium-ion batteries experience a natural self- discharge. Exhaustive discharging can therefore occur if the vehicle is idle for several months. This can damage the high-voltage battery. # To avoid damage, please observe the fol­lowing recommendations when handling the high-voltage battery. * NOTE Accelerated aging of the high-volt­age battery due to not observing the fol­lowing recommendations As a result of its basic characteristics, the storage capacity of and the amount of energy available from the high-voltage battery decrea­ses over the course of its life. Due to this, both the maximum electrical range that can be ach­ieved by the vehicle and its maximum electri­cal output can be impaired. The following factors could accelerate the aging of the high-voltage battery: R Frequent full charging (condition of charge 100%) of the high-voltage battery, in partic­ ular without subsequently driving directly afterwards R Frequent rapid charging with direct current (mode 4) R Leaving the vehicle idle for lengthy periods at high ambient temperatures # To avoid accelerated aging, please observe the following recommendations when handling the high-voltage battery. Recommendations when handling the high-voltage battery: R Every six months, when the outside tempera­ture is above 50 °F (10 °C), park the vehicle overnight with a charge level below 20%. R Only charge the high-voltage battery with direct current (mode 4) if necessary. R Charge the high-voltage battery on average to a charge level of 80%. Beyond a charge level of 80%, the charging time is considerably pro­longed. R If leaving the vehicle idle for lengthy periods, park up the vehicle with a high-voltage battery charge level between 30% and 50%. Do not keep the high-voltage battery continuously connected to power supply equipment. R If leaving the vehicle idle for lengthy periods of time avoid, if possible, high ambient tempera­tures. R Check the high-voltage battery's charge level every six weeks (/ page 202). R Charge the high-voltage battery if the charge level is below 20%. R Do not disconnect the 12 V battery even if the vehicle is left idle for a lengthy period. Other­wise, the condition of the vehicle's high-volt­age battery cannot be monitored. You can contribute to reducing the vehicle's energy consumption in the following ways: R An anticipatory driving style (/ page 179) R Reduced use of electrical consumers R Having the vehicle regularly maintained The charging time of the high-voltage battery may change over the course of its life. You can charge the high-voltage battery with both alternating current (mode 2 or 3) and direct cur­ rent (mode 4). 1 Socket for charging with alternating current 2 Socket extension for charging with direct cur­rent % When using a CCS (Combined Charging Sys­tem) charging cable to charge with direct cur­rent, both areas of the vehicle socket are cov­ered by the charging cable connector. Charging options for the high-voltage battery (mode 2, 3 or 4): R Charging through recuperation while the vehi­cle is in motion R Charging with alternating current when sta­tionary: -at a mains socket (mode 2) -at a wallbox or charging station (mode 3) R Charging with direct current when stationary: -at a rapid charging station (mode 4) Depending on the country-specific vehicle equip­ment and your vehicle's charging cable, single phase AC charging is also possible. Observe the different grid requirements of your current location when charging. Only use charging cables which conform to the grid requirements. Consult a qualified electrician or your local grid operator if you have any questions. It is recommended that you charge the high-volt­age battery at a wallbox or charging station due to the improved charging performance and better charging efficiency offered. Stowing the charging cable Always stow the vehicle charging cable in the charging cable bag provided and attach its spring hook to the cargo tie-down rings in the trunk or the cargo compartment. Otherwise, the charging cable is not sufficiently secured. System limits The power output of the high-voltage battery may be impaired by the following: R High or low outside temperatures R Electrical auxiliary consumers in the vehicle being switched on, e.g. operating the air con­ditioning system R Extended periods without charging The charging time of the high-voltage battery may be increased by the following: R High or low outside temperatures R Extended periods without charging R The maximum available charge current of the charging facility R The settings of the charging process in the multimedia system (/ page 203) Notes on charging the high-voltage battery at the mains socket (mode 2) & DANGER Risk of fatal injury from incor­rectly installed component parts Connecting the charging cable to a mains socket using incorrectly installed component parts could cause a fire or an electric shock, for example. # Only connect the charging cable to a mains socket that: R Has been properly installed and R Has been inspected by a qualified electri­cian # For safety reasons, only use the charging cable supplied with the vehicle or an original Mercedes-Benz charging cable. # Purchase these parts at an authorized Mercedes-Benz Center and obtain advice there. Mercedes-Benz thoroughly tests these original charging cables for their suitability for high-voltage charging of your vehicle. # Never use a damaged charging cable. # Do not use: R Extension cables R Extension reels R Multiple sockets # Never use socket adapters to connect the charging cable to the mains socket. The only exception being if the adapter has been tested and approved by the manufacturer for charging the high-volt­age battery of an electric vehicle. # Observe the safety notes in the operat­ing instructions for the socket adapter. Only the following charging cables may be used: R The charging cable supplied with the vehicle. R A charging cable that has been approved for the vehicle. The charging process can vary depending on the power supply equipment. The charging times when charging the high-voltage battery at the mains socket are considerably longer than when charging at a wallbox or charging station. When doing so, always observe the local informa­ tion. Do not leave the charging cable controls hanging loose from a mains socket. Do not lift the controls by the following compo­nent parts: R the charging cable connector R the mains plug When charging, protect the charging cable control element from excessive heat such as direct sun­light. Otherwise, the charging process may be canceled. Notes on charging the high-voltage battery at a wallbox or charging station (mode 3) & DANGER Risk of fatal injury from incor­rectly installed component parts Connecting the charging cable to the vehicle using incorrectly installed components could cause a fire or an electric shock, for example. # Only connect the charging cable to a wallbox if: R The wallbox has been properly installed R The wallbox has been inspected by a quali­fied electrician R The charging cable is not damaged # Do not extend the charging cable. # Do not use adapters. # Observe the safety notes in the operat­ ing instructions for the wallbox. Connecting the charging cable to a charging station using a damaged component part could cause a fire or an electric shock, for example. # For charging stations with a preinstalled charging cable: R Perform a visual check of the charg­ ing station for obvious malfunctions, such as massive damage to the hous­ing or charging cable. # For charging stations without a preinstal­led charging cable: R For safety reasons, only use charging cables that have been tested and approved by the manufacturer for charging the high-voltage battery in an electric vehicle. R Never use damaged charging cables. R Do not extend the charging cable. R Do not use adapters. # Make sure to observe the safety informa­tion on the charging station. Most charging stations must be activated before the charging process, e.g. using an RFID card or via Plug & Charge. Observe the on-site operator's instructions for the charging station and the notes on Mercedes me Charge (see the vehicle's Digital Operator's Manual). The amount of energy dispensed for the charging process, shown by the charging station, may be higher than the amount of energy actually absor­bed by the high-voltage battery. This is the result of different levels of charging losses and is descri­bed as recharge efficiency. Charging losses occur, for example, due to heat that builds up when the vehicle is charging or from auxiliary consumers that are switched on. Further information on recharge efficiency can be obtained at a qualified specialist workshop. Notes on charging the high-voltage battery at a rapid charging station (mode 4) & DANGER Risk of fatal injuries due to dam­aged components Connecting the charging cable to a charging station using a damaged component part could cause a fire or an electric shock, for example. # For charging stations with a preinstalled charging cable: R Perform a visual check of the charg­ ing station for obvious malfunctions, such as massive damage to the hous­ing or charging cable. # For charging stations without a preinstal­led charging cable: R For safety reasons, only use charging cables that have been tested and approved by the manufacturer for charging the high-voltage battery in an electric vehicle. R Never use damaged charging cables. R Do not extend the charging cable. R Do not use adapters. # Make sure to observe the safety informa­tion on the charging station. & DANGER Risk of fatal injuries when carry­ing out maintenance work during the charging process During the charging process, the high-voltage on-board electrical system is under high volt­age. # Do not perform any maintenance work during the charging process. Most charging stations must be activated prior to the charging process, e.g. using an RFID card or via Plug-and-Charge. Observe the on-site opera-tor's instructions for the charging station and the notes on Mercedes me Charge (see the vehicle's Digital Operator's Manual). The amount of energy dispensed for the charging process, which is shown by the charging station, may be higher than the amount of energy actually absorbed by the high-voltage battery. This is the result of different levels of charging losses and is described as recharge efficiency. Charging losses occur, for example, due to heat that builds up when the vehicle is charging or from auxiliary con­sumers that are switched on. Further information on recharge efficiency can be obtained at a quali­fied specialist workshop. Maximum permissible charging current for charg­ ing at a mains socket * NOTE Overloading the mains socket due to excessive charging current If the charging current is too high, the fuse could be tripped or the external mains supply could overheat. # Ensure that the external mains supply has been designed to handle the charg­ing current provided. # For safety reasons, only use the charging cable supplied with the vehicle or an original Mercedes-Benz charging cable. Mercedes-Benz thoroughly tests these original charging cables for their suitabil­ity for high-voltage charging of your vehi­cle. # Purchase these parts at a Mercedes-Benz service center and obtain advice there. # Check the maximum charging current using the charging capacity shown on the driver's display. The charging cable supplied is set to a country-specific maximum charging current value. When charging abroad, the maximum value may exceed the permitted value for that country. # Before charging at a mains socket, have the maximum permissible charging current for the relevant mains socket or the building checked by a qualified electrician. # When abroad, observe the country-specific laws when charging. If you have questions concerning the charging current or if there is a malfunction, please contact a qualified specialist workshop. Overview of the charging cable operating unit 1 Supply voltage indicator 2 Charging process indicator 3 Temperature monitor indicator 4 Safety system indicator Supply voltage indicator 1 Display Meaning Lights up white The supply voltage is connected. Charging process indicator 2 Display Meaning Flashes green The high-voltage bat­ tery is charging. Temperature monitor indicator 3 Safety system indicator 4 Display Meaning Lights up red The green LED flashes simultaneously: over-temperature – the charging performance is reduced. The green LED does not flash: overtemper­ature – the charging process is stopped. Flashes red Overtemperature at the mains plug – the charging process is stopped. Display Meaning Flashes red Charging cable mal­function – cannot carry out the charging process, reset the charging cable operat­ing unit. Lights up red White LED is off: power supply malfunc­tion – cannot carry out the charging proc­ess, replace the mains socket. White LED is on: vehi­cle malfunction – can­not carry out the charging process, reset the charging cable operating unit. When all four displays light up, the charging cable operating unit performs a self-test. If temperature monitor 3 indicates a malfunc­tion, it may help to protect the charging cable from direct sunlight. To reset the charging cable operating unit: if safety system 4 indicates a charging cable mal­function or a vehicle malfunction, first reset the charging cable operating unit. To do this, discon­nect the charging cable from the vehicle and from the mains socket and wait for approximately five seconds. If the malfunction persists after the charging cable is reconnected, charging at the mains socket is not possible. The charging cable must be replaced or the vehicle plug must be checked at a qualified specialist workshop, depending on the indicator. Functions of the indicator lamp on the vehicle socket The socket flap is centrally locked and unlocked together with the vehicle. The color and signaling of status display 1 have the following meanings: Locking status R Lights up white: vehicle socket unlocked; insert or remove charging cable R Flashes white: disconnection or malfunction during locking or unlocking Charge status R Lights up blue: charging process completed R Flashes blue: charging; active energy flow R Lights up orange: charging paused R Flashes orange: connection is being estab­ lished R Flashes red (for approx. 90s): malfunction in vehicle; charging not possible % Vehicles with active ambient lighting: when the charging sequence is activated, the charge level is also accompanied by ambient lighting (/ page 147). Starting the alternating current charging process (mode 2/3) & DANGER Risk of death when charging at a damaged socket The charging process uses high voltage. If the charging cable, the vehicle socket or the mains socket are damaged, you could receive an electric shock. # Avoid mechanical damage such as crush­ing, abrading or driving over the cable. # Have a damaged vehicle socket replaced at a qualified specialist workshop as soon as possible. # Never connect the charging cable to a damaged vehicle socket. * NOTE Damage due to overheating of charging cable and charge port During the charging process, the charging cable and charge port can heat up within the permissible limits. The permissible limit values are influenced by the following factors: R the power supply system and the charging cable are not damaged R the instructions for handling the charging cable and the control element on the charging cable have been observed # If the charging cable or charge port becomes too hot, have the power supply system checked. * NOTE Damaged or dirty vehicle socket when the socket flap is open # Always keep the socket cover and the socket flap closed when there is no charging cable connected. This protects the vehicle socket from dirt and damage. # Make sure that the socket cover is closed properly before closing the socket flap. This can otherwise result in damage which may prevent the socket flap from being opened again. * NOTE Damage to the vehicle socket or the charge port due to incorrect handling Do not use excessive force (maximum 67.4 lbf (300 N)) to insert the charge port into the vehicle socket to the stop. You may otherwise damage the vehicle socket, the charge port or their contacts. # If you feel there is increased resistance, pull the charge port out of the socket and reinsert it. Requirements: R The transmission is in position j. R The vehicle is unlocked or the distance between the key and the vehicle does not exceed 3 ft (1 m). R The vehicle has not been started. The õ display in the driver's display is off. R The charging cable is not taut. # Open socket flap 1 via the EQ module of the multimedia system (/ page 291). or # Press the center rear section of the socket flap 1. Socket flap 1 swings open and status display 2 lights up white. Vehicles with an electrical socket flap: if an obsta­cle impedes the socket flap while it is opening, the socket flap will close again automatically. % When the vehicle is started (the õ display is lit in the driver's display), socket flap 1 cannot be opened. % Only upper connection 3 is required for the charging cable connector. # To charge at a mains socket, insert the mains plug into the mains socket of the external power source as far as it will go. # Insert the charging cable connector into vehi­cle socket connection 3 to the stop. If the wallbox/charging station is not equipped with a charging cable, insert the plug of the vehi­cle's charging cable into the wallbox/charging station socket to the stop. Make sure that the charging cable is not taut when inserted. Status display 2 flashes orange and, as soon as the high-voltage battery is charged, blue. % When the charging sequence for the ambient lighting is activated, the ambient lighting lights up for approximately 30 seconds as with sta­tus display 2 (/ page 147). When Sound Experience is activated, different situations, for example the charging cable connector being inserted and removed or the beginning of the charging process, are accompanied by selected sounds. For infor­mation on Sound Experience, please refer to the Digital Operator's Manual. Vehicles with an electric socket flap: if a charging cable is not connected to the vehicle after the socket flap has been opened, the socket flap will close again automatically. When the charging cable is connected to the vehi­ cle, the vehicle cannot be started or moved. At the start of the charging process, the charge level display is shown in the driver's display with a charging prediction. The charging prediction refers to the time at which the high-voltage bat­tery will be fully charged. % Depending on the temperature, the fan and battery cooling system may audibly switch on during the charging process. % If the vehicle is idle for lengthy periods and connected to the mains supply, the high-volt­age battery will be recharged automatically as needed or when electrical consumers are activated (e.g. the pre-entry climate control). Ending the alternating current charging process (mode 2/3) Requirements: R The distance between the key and the vehicle does not exceed 3 ft (1 m). # Press charging interruption button 2. The charging process is ended. Status display 1 lights up white. The vehicle socket is unlocked. # Press and hold button 3 on the charging cable connector and remove the charging cable connector from the vehicle socket. % If you cannot remove the charging cable con­nector, repeat the unlocking procedure. If the charging cable connector is still locked, con­ tact a qualified specialist workshop. % Status display 1 indicator lamp remains lit for some time after the charging cable con­nector has been removed and then goes out. # Close the socket flap. For vehicles with an electric socket flap, observe the following notes on closing the socket flap. # Remove the charging cable connector from the mains socket, or from the socket on the wallbox/charging station, and stow the vehi­cle's charging cable safely in the vehicle (/ page 188). The electric socket flap closes automatically in the following situations: R shortly after the charging cable connector has been removed R after the socket flap has been tapped in the direction to close it R after transmission position i, h or k has been engaged Automatic backing up function of the electric socket flap If an obstacle impedes the electrical socket flap while it is closing, the socket flap will open again automatically. # When closing the socket flap, make sure that no body parts or objects are in the closing area. Starting the direct current charging process (mode 4) & DANGER Risk of death when charging at a damaged socket The charging process uses high voltage. If the charging cable, the vehicle socket or the mains socket are damaged, you could receive an electric shock. # Only use an undamaged charging cable. # Avoid mechanical damage such as crush­ ing, abrading or driving over the cable. # Have a damaged vehicle socket replaced at a qualified specialist workshop as soon as possible. # Never connect the charging cable to a damaged vehicle socket. * NOTE Damage due to overheating of charging cable and charge port During the charging process, the charging cable and charge port can heat up within the permissible limits. The permissible limit values are influenced by the following factors: R the power supply system and the charging cable are not damaged R the instructions for handling the charging cable and the control element on the charging cable have been observed # If the charging cable or charge port becomes too hot, have the power supply system checked. * NOTE Damaged or dirty vehicle socket when the socket flap is open # Always keep the socket cover and the socket flap closed when there is no charging cable connected. This protects the vehicle socket from dirt and damage. # Make sure that the socket cover is closed properly before closing the socket flap. This can otherwise result in damage which may prevent the socket flap from being opened again. * NOTE Damage to the vehicle socket or the charge port due to incorrect handling Do not use excessive force (maximum 67.4 lbf (300 N)) to insert the charge port into the vehicle socket to the stop. You may otherwise damage the vehicle socket, the charge port or their contacts. # If you feel there is increased resistance, pull the charge port out of the socket and reinsert it. Requirements: R The transmission is in position j. R The vehicle is unlocked or the distance between the key and the vehicle does not exceed 3 ft (1 m). R The vehicle has not been started. The õ display in the driver's display is off. R The charging cable is not taut. # Open socket flap 1 via the EQ module of the multimedia system (/ page 291). or # Press the center rear section of the socket flap 1. Socket flap 1 swings open and status display 2 lights up white. Vehicles with an electrical socket flap: if an obsta­cle impedes the socket flap while it is opening, the socket flap will close again automatically. % When the vehicle is started (the õ display is lit in the driver's display), socket flap 1 cannot be opened. # Remove socket cover 4 from the lower con­nection of vehicle socket 3. % The CCS charging cable connector requires both vehicle socket connections 3. # Insert the charging cable connector into vehi­cle socket 3 to the stop. Make sure that the charging cable is not taut when inserted. Status display 2 flashes orange and, as soon as the high-voltage battery is charged, blue. % When the charging sequence for the ambient lighting is activated, the ambient lighting lights up for approximately 30 seconds as with sta­tus display 2 (/ page 147). When Sound Experience is activated, different situations, for example the charging cable connector being inserted and removed or the beginning of the charging process, are accompanied by selected sounds. For infor­mation on Sound Experience, please refer to the Digital Operator's Manual. Vehicles with an electric socket flap: if a charging cable is not connected to the vehicle after the socket flap has been opened, the socket flap will close again automatically. When the charging cable is connected to the vehi­ cle, the vehicle cannot be started or moved. At the start of the charging process, the charge level display is shown in the driver's display with a charging prediction. The charging prediction refers to the time at which the high-voltage bat­tery will be fully charged. % Depending on the temperature, the fan and battery cooling system may audibly switch on during the charging process. % If the vehicle is idle for lengthy periods and connected to the mains supply, the high-volt­age battery will be recharged automatically as needed or when electrical consumers are activated (e.g. the pre-entry climate control). Ending the direct current charging process (mode 4) Requirements: R The distance between the key and the vehicle does not exceed 3 ft (1 m). # Press charging interruption button 2. The charging process is ended. Status display 1 lights up white. The vehicle socket is unlocked. # Press and hold button 3 on the charging cable connector and remove the charging cable connector from the vehicle socket. % If you cannot remove the charging cable con­nector, unlock the vehicle and repeat the pro­cedure. If the charging cable connector is still locked, contact a qualified specialist work­shop. % Status display 1 indicator lamp remains lit for some time after the charging cable con­nector has been removed and then goes out. # Insert socket cover 4 into the lower vehicle socket connection. # Close the socket flap. For vehicles with an electric socket flap, observe the following notes on closing the socket flap. The electric socket flap closes automatically in the following situations: R shortly after the charging cable connector has been removed R after the socket flap has been tapped in the direction to close it R after transmission position i, h or k has been engaged Automatic backing up function of the electric socket flap If an obstacle impedes the electrical socket flap while it is closing, the socket flap will open again automatically. The automatic backing up function is only an aid and is not a substitute for your attentiveness. # When closing the socket flap, make sure that no body parts or objects are in the closing area. Function of the charge level display in the driver's display % The data shown in the illustration is example data. 1 Range at current charge level 2 Current state of charge of the high-voltage battery 3 Maximum state of charge (depending on the setting) 4 Time remaining until completely charged (until the selected maximum charge level is reached) 5 Charge level recommended by Range Assis­tant to reach the next destination 6 Dynamic charge level display 7 Current charging capacity % Specified remaining range 1 may vary due to different factors, e.g. driving style or topogra­phy. When the vehicle is connected to the mains sup­ply and is switched off, the driver's display shows the charge level display for approximately two minutes. % The value of current charging capacity 7 can differ from the display on the charging station. At a charging capacity of 10 kW or higher, the value in the charge level display is rounded off and shown without a decimal place. The value in 4 varies depending on the setting of the charging process. It displays the charging pre­diction, e.g. the time at which the selected charge level will be reached or the charge level at the pre-selected departure time. Configuring the charging settings Multimedia system: 4 © 5 EQ 5 Charging Setting the charging program # Select Home, Work or Standard. Opening and closing the socket flap using the MMS # Press Open socket flap to open the socket flap. # The charging process can be interrupted using Stop Charging. The charging process is ended and the charging cable is unlocked. # Press Close socket flap to close the socket flap. The socket flap also closes automatically when the transmission is shifted out of posi­tion j. The socket flap also closes automati­cally after one minute if it has been opened but no plug has been inserted, and ten to fif­teen seconds after the plug has been removed. % Further notes on charging with alternating current: (/ page 195) or direct current: (/ page 199). Unlocking the charging cable (mode 3 or 4) When the function is active, the charging cable is unlocked when the maximum charge level is reached. # Select Home or Work. # Activate or deactivate Unlock Charging Cable. Activating or deactivating location-based charging # Select Charge at home or Charge at work. # Activate or deactivate Select Based on Loca­tion. When the function is activated, the vehicle's cur­rent position is saved as one of the selected options. When the address is reached again, the charging program is automatically switched over as soon as parking position j is engaged. Activating or deactivating ECO charging # Activate or deactivate the function. The ECO charging function limits the charging voltage at charging stations to conserve the vehi­cle's battery. Setting the departure time The set departure times are used for the vehicle's pre-entry climate control and for predictions regarding the approximate state of charge and range at the time selected. The charging process always starts immediately, irrespective of the next departure time. # Select Departure Time. The following charging times can be selected: R individual charging times R a Week Profile Setting an individual departure time # Select Add New Time and set a new depar­ture time. or # Select ´ and adapt an existing departure time. Setting the repeat days # Select Add New Time and set a new depar­ture time. # Mark the relevant weekdays for which the departure time will apply and confirm with a. or # Select ´ and edit existing repeat days. Setting a break in the charging process Up to four breaks in the charging process can be set during which the vehicle is not charged, even if it is connected to a charging station. # Select Charging Pauses. # Select Add New Time and then set and save the times for the beginning and end of the break. # Activate or deactivate the charging breaks that have been set. Set charging breaks can be edited with the ´ button or deleted with the E button. Parking the vehicle & WARNING Risk of accident and injury caused by an insufficiently secured vehi­cle rolling away If the vehicle is not securely parked suffi­ciently, it can roll away in an uncontrolled way even at a slight downhill gradient. # On uphill or downhill gradients, turn the front wheels so that the vehicle rolls towards the curb if it starts moving. # Apply the parking brake. # Switch the transmission to position j. & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. * NOTE Damage to the vehicle due to it roll­ing away # Always secure the vehicle against rolling away. * NOTE Damage caused by vehicle being lowered Vehicles AIRMATIC: The vehicle can be low­ered due to differences in temperature or extended non-operational times. This can cause damage to parts of the body. # When stopping the vehicle and when driving off, make sure that there are no obstacles such as curbs under or in the immediate vicinity of the body. % If you park the vehicle for a long period, observe the following notes: R Make sure the high-voltage battery has a sufficient state of charge, especially at very low outside temperatures. That way, you can avoid any problems when the vehicle is subsequently started. R If possible, avoid parking spaces in direct sunlight. Observe the notes on charging the high-volt­age battery (/ page 188). Vehicles with central display Vehicles with MBUX Hyperscreen # Bring the vehicle to a standstill by depressing the brake pedal. # On gradients, turn the front wheels so that the vehicle will roll towards the curb if it starts moving. # Apply the electric parking brake. # Engage transmission position j in a station­ary vehicle with the brake pedal depressed (/ page 187). # Switch off the vehicle by pressing button 1. # Release the service brake slowly. # Get out of the vehicle and lock it. % When you park the vehicle, you can still oper­ate the side windows and the panoramic slid­ing sunroof for approximately four minutes if the driver's door is closed. Garage door opener ¦Programming buttons for the garage door opener & WARNING Risk of injury by becoming trapped when opening and closing a garage door When you operate or program a garage door with an integrated garage door opener, per­sons can become trapped or struck by the garage door if they stand within its range of movement. # Always make sure that nobody is within the range of the garage door's move­ment. Only operate the following doors using the garage door opener: R Doors with a safety stop and reversing func­tion R Doors that conform to the current U.S. safety standards Before programming the garage door opener, park the vehicle outside the garage. Make sure that the vehicle is switched on but not started. Requirements R The vehicle has been parked outside the garage or outside the range of movement of the door. R The vehicle is switched on. R The vehicle has not been started. % The garage door opener function is always available when the vehicle is switched on. #Check that the transmitter frequency of theremote control has a frequency range of 280to 868 MHz.Radio equipment approval number:RNZLMUAHL5 (USA)R4112A-MUAHL5 (Canada)# Press and hold button 1, 2 or 3 that you wish to program. Indicator lamp 4 will flash yellow. % It can take up to 20 seconds before the indi­cator lamp flashes yellow. # Release the button previously pressed. Indicator lamp 4 will continue to flash yellow. # Point remote control 5 from a distance of 0.4 in (1 cm) to 3 in (8 cm) towards button 1, 2 or 3. # Press and hold button 6 of remote control 5 until one of the following signals appears: R Indicator lamp 4 lights up green continu­ ously. Programming is complete. R Indicator lamp 4 flashes green. Program­ming was successful. Additionally, the roll­ing code must be synchronized with the door system. # If indicator lamp 4 does not light up or flash green: repeat the procedure. # Release all of the buttons. % The remote control for the door drive is not included in the scope of delivery of the garage door opener. ¦Synchronizing the rolling code Requirements R The door system uses a rolling code. R The vehicle must be within range of the garage door or door drive. R The vehicle as well as persons and objects are located outside the range of movement of the door. # Press the programming button on the door drive unit. Initiate the next step within approximately 30 seconds. # Press previously programmed button 1, 2 or 3 repeatedly until the door closes. When the door closes, programming is com­pleted. % Please also read the operating instructions for the door drive. ¦Troubleshooting when programming the remote control # Check if the transmitter frequency of remote control 5 is supported. # Replace the batteries in remote control 5. # Hold remote control 5 at various angles from a distance of 0.4 in (1 cm) to 3 in (8 cm) front of the inside rearview mirror. You should test every position for at least 25 seconds before trying another position. # Hold remote control 5 at the same angles at various distances in front of the inside rear-view mirror. You should test every position for at least 25 seconds before trying another position. # On remote controls that transmit only for a limited period, press button 6 on remote control 5 again before transmission ends. # Angle the antenna line of the garage door opener unit towards the remote control. % It is possible that older garage doors cannot be operated using the remote control in the inside rearview mirror even after you have successfully performed the measures descri­bed above. If this is the case, contact the HomeLink® Hotline. % Support and additional information on pro­gram: R on the toll free HomeLink® Hotline on 1-800-355-3515 R on the Internet at https:// www.homelink.com/mercedes ¦Opening or closing a garage door Requirements R The corresponding button is programmed to operate the door. # Press and hold button 1, 2 or 3 until the door opens or closes. # If indicator lamp 4 flashes yellow after approximately 20 seconds: press and hold the button previously pressed again until the door opens or closes. ¦Clearing the garage door opener memory # Press and hold buttons 1 and 3. Indicator lamp 4 will light up yellow. # If indicator lamp 4 flashes green: release buttons 1 and 3. The entire memory has been deleted. Electric parking brake ¦Function of the electric parking brake (applying automatically) & WARNING Risk of accident and injury due to children left unattended in the vehicle If children are left unsupervised in the vehicle, they could, in particular: R open doors, thereby endangering other persons or road users. R get out and be struck by oncoming traffic. R operate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: R releasing the parking brake. R changing the transmission position. R starting the vehicle. # Never leave children unattended in the vehicle. # When leaving the vehicle, always take the SmartKey with you and lock the vehicle. # Keep the vehicle SmartKey out of reach of children. The electric parking brake is applied if the trans­mission is in position j and one of the following conditions is fulfilled: R The vehicle is switched off. R The seat belt tongue is not inserted in the seat belt buckle of the driver's seat and the driver's door is opened. % To prevent application: pull the handle of the electric parking brake (/ page 209). In the following situations, the electric parking brake is also applied: R The HOLD function is keeping the vehicle sta­tionary. R Active Parking Assist is keeping the vehicle stationary. R Active Distance Assist DISTRONIC is bringing the vehicle to a standstill. R In addition, one of the following conditions must be fulfilled: -The vehicle is switched off. -The seat belt tongue is not inserted in the seat belt buckle of the driver's seat and the driver's door is opened. -There is a system malfunction. -The power supply is insufficient. -The vehicle is stationary for a lengthy period. When the electric parking brake is applied, the red F (USA) or ! (Canada) indicator lamp lights up in the driver's display. ¦Function of the electric parking brake (releas­ ing automatically) The electric parking brake is released when the following conditions are fulfilled: R The driver's door is closed. R The vehicle has been started. R The transmission is in position h or k and you depress the accelerator pedal or you shift from transmission position j to h or k when on level ground. R If the transmission is in position k, the trunk lid must be closed. R The seat belt tongue is inserted into the seat belt buckle of the driver's seat. If the seat belt tongue is not inserted into the seat belt buckle of the driver's seat, one of the following conditions must be fulfilled: -You shift from transmission position j. or -You have previously driven at speeds greater than 2 mph (3 km/h). When the electric parking brake is released, the red F (USA) or ! (Canada) indicator lamp in the driver's display goes out. ¦Applying/releasing the electric parking brake manually Applying # Push handle 1. The red F (USA) or ! (Canada) indica­tor lamp lights up in the driver's display. % The electric parking brake is only securely applied if the red F (USA) or ! (Can­ada) indicator lamp is lit continuously. Releasing # Switch on the vehicle. # Pull handle 1. The red F (USA) or ! (Canada) indica­tor lamp in the driver's display goes out. ¦Emergency braking # Press and hold handle 1. As long as the vehicle is in motion, the Release Parking Brake message is displayed and the red F (USA) or ! (Canada) indicator lamp flashes. When the vehicle has been braked to a stand­still, the electric parking brake is applied. The red F (USA) or ! (Canada) indicator lamp lights up in the driver's display. Information on collision detection when a vehicle is parked If a collision is detected when the tow-away alarm is armed on a locked vehicle, you will receive a notification in the multimedia system when you switch the vehicle on. You will receive information about the following points: R The area of the vehicle that may have been damaged. R The force of the impact. The following situation can lead to inadvertent activation: R The parked vehicle is moved, for example, in a two-story garage. % Deactivate the tow-away alarm in order to prevent inadvertent activation. If you deacti­vate the tow-away alarm, collision detection will also be deactivated. You can permanently deactivate collision detection via the multimedia system (/ page 211). % If the battery is severely discharged, the func­tion for detecting a collision with a parked vehicle will automatically be deactivated to facilitate the next engine start. System limits Detection may be restricted in the following situa­tions: R The vehicle is damaged without an impact, for example, if an outside mirror is torn off or the paint is damaged by a key R An impact occurs at low speed R The electric parking brake is not applied % You are responsible for your vehicle. There­fore, always make sure that your vehicle is free of damage and is roadworthy. Setting collision detection on a parked vehicle Multimedia system: 4 © 5 Settings 5 Vehicle 5 Open/Close 5 Vehicle Protection # Activate or deactivate the function via Colli­sion Notification. % A maximum of three incidents can be regis­tered. Up to 15 photos are taken for every incident. In the event of another incident, the photos of the first incident will be overwritten if they have not been deleted already. Activating or deactivating the collision photos function Note possible legal restrictions in some countries regarding automatic recording of the vehicle sur­roundings. # Activate or deactivate Take photos. Transferring the collision photos with the Mercedes me App # Select Upload to Mercedes me. # Select Upload Automatically. # Scan the generated QR code on the central display with the Mercedes me App. The encrypted collision photos will then be uploaded to Mercedes me. % Any device that can scan QR codes can be used to view the collision photos in the Mercedes me App. Copying the collision photos to a USB flash drive # Connect a USB flash drive . # Select Manage Collision Photos. # Select Copy (USB). All collision photos are copied to the USB flash drive. % To ensure secure operation, only use with FAT32 or exFAT formatted USB storage devi­ces. Deleting collision photos # Select Manage Collision Photos. # Select Delete. All collision photos will be deleted. Driving systems and your responsibility Your vehicle is equipped with driving systems which assist you in driving, parking and maneuver­ing the vehicle. The driving systems are only aids. They are not a substitute for you paying attention to your surroundings and do not relieve you of your responsibility pertaining to road traffic law. The driver is always responsible for maintaining a safe distance to the vehicle in front, for vehicle speed, for braking in good time and for staying in lane. Pay attention to the traffic conditions at all times and intervene when necessary. Be aware of the limitations regarding the safe use of these systems. Driving systems can neither reduce the risk of accident if you fail to adapt your driving style nor override the laws of physics. They cannot always take into account road, weather or traffic condi­tions. Information on vehicle sensors and cameras Some driving and driving safety systems use cam­eras as well as radar or ultrasonic sensors to monitor the area in front of, behind or next to the vehicle. 1 Multifunction camera 2 Cameras in the outside mirrors 3 Front radar 4 Front camera 5 Corner radars 6 Ultrasonic sensors 7 Rear view camera & WARNING Risk of accident due to restric­ted detection performance of vehicle sen­sors and cameras If the area around vehicle sensors or cameras is covered, damaged or dirty, certain driving and safety systems cannot function correctly. There is a risk of an accident. # Keep the area around vehicle sensors or cameras clear of any obstructions and clean. # Have damage to the bumper, radiator grille or stone chipping in the area of the front and rear windows repaired at a qualified specialist workshop. Particularly, keep the areas around the sensors and cameras free of dirt, ice or slush (/ page 348). The sensors and cameras must not be covered and the detection ranges around them must be kept free. Do not attach additional license plate brackets, advertisements, stickers, foils or foils to protect against stone chippings in the detection range of the sensors and cameras. Make sure that there are no overhanging loads protruding into the detection range. If there is damage to a bumper or the radiator grill, or after an impact, have the function of the sensors checked at a qualified specialist work­shop. Have damage or stone chipping in the area of the cameras on the front and rear passenger compartment windows repaired at a qualified spe­cialist workshop. % The rear view camera can extend and retract automatically for the purpose of calibration, even though there is no camera image in the display. Overview of driving systems and driving safety systems R ABS (/ page 214) R BAS (/ page 214) R ESP® (/ page 214) R ESP® Crosswind Assist (/ page 215) R EBD (/ page 216) R STEER CONTROL (/ page 216) R HOLD function (/ page 216) R Hill Start Assist (/ page 217) R Valet service mode (/ page 218) R Beginner driver mode (/ page 218) R ATTENTION ASSIST (/ page 219) R Cruise control (/ page 221) R Traffic Sign Assist (/ page 241) R Traffic light view (/ page 245) R AIRMATIC (/ page 253) Driving Assistance Package % The availability of some functions or sub-func­tions of the Driving Assistance Package is equipment- or country-specific. The functions of your Driving Assistance Package may differ from the functions listed here. Active Distance Assist DISTRONIC, Active Blind Spot Assist, Active Brake Assist, Active Lane Keeping Assist and Active Emergency Stop Assist are also available without the Driv­ing Assistance Package, albeit with restricted functionality. R Active Distance Assist DISTRONIC (/ page 223) R Active Speed Limit Assist (/ page 227) R Route-based speed adaptation (/ page 228) R Active Brake Assist (/ page 236) R Active Steering Assist (/ page 230) R Active Emergency Stop Assist (/ page 232) R Active Lane Change Assist (/ page 234) R Active Stop-and-Go Assist (/ page 230) R Active Blind Spot Assist with exit warning (/ page 247) R Active Lane Keeping Assist (/ page 251) R PRE-SAFE® Impulse Side (/ page 57) Parking Package % The availability of individual functions is coun­try- and equipment-dependent. R Rear view camera (/ page 254) R 360° camera (/ page 255) R Parking Assist PARKTRONIC (/ page 260) R Active Parking Assist (/ page 264) R Remote Parking Assist (/ page 269) ABS warning lamp lights up continuously after The brakes will function as usual once you release the vehicle is started. the brake pedal. BAS will be deactivated. R Memory Parking Assist (country-dependent) (/ page 276) Function of BAS Function of ESP® Functions of ABS The Anti-lock Brake System (ABS) regulates the brake pressure in critical driving situations: R During braking, for instance, at maximum full-stop braking or if there is insufficient tire trac­tion, the wheels are prevented from locking. R Vehicle steerability while braking is ensured. If ABS intervenes when braking, you will feel a pulsing in the brake pedal. The pulsating brake pedal can be an indication of hazardous road con­ditions and can serve as a reminder to take extra care while driving. System limits R ABS is active from speeds of approx. 3 mph (5 km/h). R ABS may be impaired or may not function if a malfunction has occurred and the yellow ! & WARNING Risk of an accident caused by a malfunction in BAS (Brake Assist System) If BAS is malfunctioning, the braking distance in an emergency braking situation is increased. # Depress the brake pedal with full force in emergency braking situations. ABS pre­vents the wheels from locking. The Brake Assist System (BAS) supports your emergency braking situation with additional brake force. If you depress the brake pedal quickly, BAS will be activated: R BAS automatically boosts the brake pressure. R BAS can shorten the braking distance. R ABS prevents the wheels from locking. & WARNING Risk of skidding if ESP® is deactivated If you deactivate ESP®, ESP® cannot carry out vehicle stabilization. # ESP® should only be deactivated in the following situations. * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. The Electronic Stability Program (ESP®) can moni­tor and improve driving stability and traction in the following situations within physical limits: R When pulling away on a wet or slippery road. R When braking. R In strong side winds when you are driving faster than 50 mph (80 km/h). If the vehicle deviates from the direction desired by the driver, ESP® can stabilize the vehicle by intervening in the following ways: R One or more wheels are braked. R The drive system output is adapted according to the situation. ESP® is deactivated if the åESP® OFF warn­ing lamp lights up continuously in the driver's dis­play: R Driving stability will no longer be improved. R Crosswind Assist is no longer active. R The drive wheels could spin. R ETS/4ETS traction control is still active. % When ESP® is deactivated, you are still assis­ted by ESP® when braking. If the ÷ESP® warning lamp flashes in the driv­er's display, one or several wheels has reached its grip limit: R Adapt your driving style to suit the current road and weather conditions. R Do not deactivate ESP®. R Only depress the accelerator pedal as far as is necessary when pulling away. Deactivate ESP® in the following situations to improve traction: R When using snow chains. R In deep snow. R On sand or gravel. % Spinning the wheels results in a cutting action, which enhances traction. If the ÷ESP® warning lamp lights up continu­ously, ESP® is not available due to a malfunction. ETS/4ETS (Electronic Traction System) ETS/4ETS traction control is part of ESP® and makes it possible to pull away and accelerate on a slippery road. ETS/4ETS can improve the vehicle's traction by intervening in the following ways: R The drive wheels are braked individually if they spin. R More drive torque is transferred to the wheel or wheels with traction. Influence of drive programs on ESP® The drive programs enable ESP® to adapt to dif­ferent weather and road conditions as well as the driver's preferred driving style. Depending on the selected drive program, the appropriate ESP® mode will be activated. You can select the drive programs using the DYNAMIC SELECT button (/ page 185). Function of ESP® Crosswind Assist ESP® Crosswind Assist detects sudden gusts of side wind and helps the driver to keep the vehicle in the lane: R ESP® Crosswind Assist is active at vehicle speeds between approx. 47 mph (75 km/h) and 125 mph (200 km/h) when driving straight ahead or cornering slightly. Activating/deactivating ESP® (Electronic Stability Program) Multimedia system: 4 © 5 ß 5 y * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. # Select ESP. # Select On or å Off. ESP® is deactivated if the åESP® OFF warn­ing lamp lights up continuously in the driver's dis­play. Observe any information on warning lamps and display messages which may be shown in the driv­er's display. Function of EBD Electronic Brakeforce Distribution (EBD) is charac­ terized by the following: R Monitoring and regulating the brake pressure on the rear wheels. R Improved driving stability when braking, espe­cially on bends. Function of STEER CONTROL STEER CONTROL assists you by transmitting feed­back that you can feel through the steering wheel in the direction required for vehicle stabilization. This steering recommendation will be given in the following situations: R both right wheels or both left wheels are on a wet or slippery road surface when you brake R the vehicle starts to skid System limits STEER CONTROL may be impaired or may not function in the following situations: R ESP® is deactivated. R ESP® is malfunctioning. R The steering is malfunctioning. If ESP® is malfunctioning, you will be assisted fur­ther by the electric power steering. HOLD function ¦HOLD function The HOLD function holds the vehicle at a stand­still without requiring you to depress the brake pedal, e.g. while waiting in traffic. The HOLD function is only an aid. The responsibil­ity for the vehicle safely standing still remains with the driver. System limits The HOLD function is only intended to provide assistance when driving and is not a sufficient means of safeguarding the vehicle against rolling away when stationary. R The incline must not be greater than 30%. ¦Activating/deactivating the HOLD function & WARNING Risk of an accident due to the HOLD function being active when you leave the vehicle If the vehicle is only braked with the HOLD function it could, in the following situations, roll away: R If there is a malfunction in the system or in the power supply. R If the HOLD function is deactivated by depressing the accelerator pedal or brake pedal, e.g. by a vehicle occupant. # Always secure the vehicle against rolling away before you leave it. Requirements R The vehicle is stationary. R The driver's door is closed or the seat belt on the driver's side is fastened. R The vehicle has been started. R The electric parking brake is released. R Active Distance Assist DISTRONIC is deactiva­ted. R The transmission is in position h, k or i. Activating the HOLD function # Depress the brake pedal, and after a short time quickly depress further until the ë display appears in the driver's display. # Release the brake pedal. Deactivating the HOLD function # Depress the accelerator pedal to pull away. or # Depress the brake pedal until the ë display disappears from the driver's display. The HOLD function is deactivated in the following situations: R Active Distance Assist DISTRONIC is activa­ted. R The transmission is shifted to position j. R The vehicle is secured with the electric park­ ing brake. In the following situations, the vehicle is held by transmission position j and/or by the electric parking brake: R The seat belt is unfastened and the driver's door is opened. R The vehicle is switched off. R There is a system malfunction. R The power supply is insufficient. In addition, the Brake Immediately message may appear in the driver's display and a horn tone may sound at regular intervals. # Immediately depress the brake pedal firmly until the warning message disappears. The HOLD function is deactivated. # Additionally secure the vehicle against rolling away. Function of Hill Start Assist Hill Start Assist holds the vehicle for a short time when you pull away on a hill under the following conditions: R The transmission is in position h or k. This gives you enough time to move your foot from the brake pedal to the accelerator pedal and depress it before the vehicle begins to roll away. & WARNING Risk of accident and injury due to the vehicle rolling away After a short time, Hill Start Assist no longer holds the vehicle. # Swiftly move your foot from the brake pedal to the accelerator pedal. Do not leave the vehicle when it is being held by Hill Start Assist. Valet service mode ¦Function of the valet service mode In valet service mode, the vehicle acceleration is limited to reduce the risk of damage to and improper use of the vehicle when it is handed over to third parties. Valet service mode is characterized by the follow­ ing: R The maximum speed that can be driven is limi­ted to 50 mph (80 km/h). R Drive programs Band = are not availa­ble. R ESP® cannot be deactivated. R Profiles that are still logged in are logged out and unprotected profiles are secured. ¦Activating or deactivating valet service mode Requirements: R For activation: the vehicle is stationary. R For deactivation: park position j is engaged. Multimedia system: 4 © 5 Apps 5 Valet service mode % This function is an on-demand feature (/ page 27). # Activate or deactivate the function. If valet service mode is activated, an indicator lamp in the driver's display lights up. % Alternatively, valet service mode can be acti­vated or deactivated via the Mercedes me connect App. Further information on Mercedes me connect (/ page 333) % Valet service mode is protected from deacti­vation by third parties only in combination with Mercedes me connect. If the vehicle is connected to Mercedes me connect, only the profile that activated the mode or the estab­lished main user can deactivate it again. % Valet service mode remains active even fol­lowing a change of profile or after the vehicle is switched on or off, and must be deliberately deactivated by the authorized user. Beginner driver mode ¦Function of the beginner driver mode In beginner driver mode, the vehicle acceleration is limited to increase safety for inexperienced drivers. Beginner driver mode is characterized by the fol­ lowing: R The maximum speed that can be driven is limi­ted to 75 mph (120 km/h). R Drive programs Band = are not availa­ble. R ESP® cannot be deactivated. ¦Activating or deactivating beginner driver mode Requirements: R For activation: the vehicle is stationary. R For deactivation: park position j is engaged. Multimedia system: 4 © 5 Apps 5 Beginner driver mode % This function is an on-demand feature (/ page 27). # Activate or deactivate the function. If beginner driver mode is activated, an indica­tor lamp in the driver's display lights up. % Alternatively, beginner driver mode can be activated or deactivated via the Mercedes me connect app. Further information on Mercedes me connect (/ page 333) % Beginner driver mode is protected from deac­tivation by third parties only in combination with Mercedes me connect. If the vehicle is connected to Mercedes me connect, only the profile that activated the mode or the estab­lished main user can deactivate it again. % Beginner driver mode remains active even fol­lowing a change of profile or after the vehicle is switched on or off, and must be deliberately deactivated by the authorized user. ATTENTION ASSIST ¦Function of ATTENTION ASSIST ATTENTION ASSIST assists you on long, monoto­nous journeys, e.g. on highways and trunk roads. If indicators of fatigue or increasing lapses in con­centration on the part of the driver are detected, the system will suggest taking a break. ATTENTION ASSIST is only an aid. It cannot always detect fatigue or lapses in concentration in time. The system is not a substitute for a well-res­ted and attentive driver. On long journeys, take regular breaks in good time that allow for ade­quate recuperation. You can choose between two settings: R Standard: normal system sensitivity. R Sensitive: higher system sensitivity. The driver will be warned earlier and the attention level detected by ATTENTION ASSIST will be adap­ted accordingly. If fatigue or increasing inattention is detected, the warning appears on the driver display: ATTEN­TION ASSIST: Take a Break!. you can acknowl­edge the message and take a break if necessary. If you do not take a break and ATTENTION ASSIST continues to detect increasing lapses in concen­tration, you will be warned again after a minimum of 15 minutes. The following information will be displayed on the driver's display: R The length of the journey since the last break R The attention level determined by ATTENTION ASSIST: -The more segments 1 of the circle dis­played, the higher the detected attention level. -Fewer segments 1 will be displayed in the circle as the attention level decreases. If ATTENTION ASSIST is unable to calculate the attention level and cannot issue a warning, the System Suspended message will appear. If the driver display shows a warning, a rest area search will be offered in the multimedia system. You can select a rest area and start navigation to this rest area. When you restart the vehicle, ATTENTION ASSIST will automatically be switched on. The last selec­ted sensitivity level will remain stored. System limits ATTENTION ASSIST is active in the 37 mph (60 km/h) to 124 mph (200 km/h) speed range. Particularly in the following situations, ATTENTION ASSIST will function only in a restricted manner and warnings may be delayed or not occur: R If you have been driving for less than approx­imately 30 minutes. R If the road condition is poor (uneven road sur­face or potholes). R If there is a strong side wind. R If you adopt a sporty driving style (high corner­ing speeds or high rates of acceleration). R If the Steering Assist function of Active Dis­tance Assist DISTRONIC is active. R If the clock is set to the incorrect time. R If you change lanes and vary your speed fre­quently in active driving situations. Also observe any information regarding display messages that can be displayed on the driver's display. The ATTENTION ASSIST drowsiness or alertness assessment will be reset and restarted when you continue the journey in the following situations: R If you switch off the vehicle. R If you unfasten your seat belt and open the driver's door (e.g. to change drivers or take a break). ¦Setting ATTENTION ASSIST Multimedia system: 4 © 5 Settings 5 Assistance 5 Assistance 5 ATTENTION ASSIST Setting the sensitivity # Select Z next to ATTENTION ASSIST. # Select Standard or Sensitive. Speed control cruise control ¦Function of cruise control Cruise control regulates the speed to the value selected by the driver. If you accelerate to overtake, forexample, the stored speed is not deleted. If you remove your foot from the accelerator pedal after overtaking, cruise control will resume speed regulation back to the stored speed. You can store any speed above 15 mph (20 km/h) up to the maximum design speed, or up to the speed recommended by Range Assis­tant. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). Mercedes-AMG vehicles: cruise control is availa­ble up to a maximum speed of 155 mph (250 km/h). Displays in the driver's display R h (gray): cruise control is selected but not yet active, or temporarily passive. R h (green): cruise control is active. A stored speed appears under the h display and is indicated in the speedometer. System limits Cruise control may be unable to maintain the stored speed on uphill gradients. The stored speed is resumed when the gradient evens out. Increase recuperation in good time on long and steep downhill gradients. Take particular note of this when driving a laden vehicle. By doing so, you will make use of the electric motor's braking effect to charge the high-voltage battery. This relieves the load on the brake system and pre­vents the brakes from overheating and wearing too quickly. Do not use cruise control in the following situa­tions: R in traffic situations which require frequent changes of speed, e.g. in heavy traffic, on winding roads R on slippery roads. Accelerating can cause the drive wheels to lose traction and the vehicle could then skid. R when visibility is poor ¦Operating cruise control & WARNING Risk of accident due to stored speed If you call up the stored speed and this is lower than your current speed, the vehicle decelerates. # Take into account the traffic situation before calling up the stored speed. Requirements: R Cruise control is selected. R ESP® must be activated, but not intervening. R The vehicle speed is at least 15 mph (20 km/h). R The transmission is in position h. Steering wheel control panel for cruise control J Adopts the stored/detected speed ± Deactivates cruise control M Activates cruise control N Deactivates cruise control 1 Control panel to increase/reduce speed Activating cruise control # Press M. Activating cruise control # Press M or N on control panel 1. The current speed is stored and maintained by the vehicle. or # Press J. The last stored speed is called up and main­tained by the vehicle. If the last stored speed has previously been deleted, the current vehicle speed is stored. % When you switch off the vehicle, the last speed stored is deleted. Increasing/reducing the stored speed # To increase the stored speed: swipe upwards from the bottom of control panel 1. R The stored speed is increased by 1 mph (1 km/h). # To reduce the stored speed: swipe downwards from the top of control panel 1. R The stored speed is reduced by 1 mph (1 km/h). or # Briefly press M or N on control panel 1. The stored speed is increased or reduced to the following values depending on the unit: R mph: the next value ending in 5 R km/h: the next value ending in 0 or # Accelerate the vehicle to the desired speed. # Press M on control panel 1. Adopting a detected speed If cruise control is activated and Traffic Sign Assist has detected a traffic sign with a maximum permissible speed and this is displayed on the driver's display: # Press J. The maximum permissible speed shown by the traffic sign is stored and the vehicle maintains this speed. Deactivating cruise control # Press ±. Switching cruise control off # Press N. % If you brake, deactivate ESP® or if ESP® inter­venes, cruise control is deactivated. Active Distance Assist DISTRONIC ¦Function of Active Distance Assist DISTRONIC DISTRONIC Active Distance Assist maintains the set speed on free-flowing roads. If vehicles are detected ahead, the set distance will be main­tained until the vehicle comes to a standstill if necessary. The vehicle will accelerate or brake depending on the distance to the vehicle in front and the set speed. The speed and distance to the vehicle in front are set and saved using the steer­ing wheel. Available speed range: R Vehicles without Driving Assistance Package: 15 mph (20 km/h) - 100 mph (160 km/h) R Vehicles with Driving Assistance Package: 15 mph (20 km/h) -130 mph (210 km/h) % The adjustable set speed may differ if a limit speed (e.g. winter tire limit) is stored. % If Active Distance Assist DISTRONIC is active and the range monitor recommends a lower driving speed, this will automatically be adop­ted as the new set speed. If necessary, the setting speed can be increased again man­ually. Other features of Active Distance Assist DISTRONIC: R Adjusts the driving style depending on the selected drive program (energy-saving, com­fortable or dynamic) (/ page 184) R Initiates acceleration to the stored speed if the turn signal indicator is switched on to change to the overtaking lane R Vehicles with Driving Assistance Package: -Reacts to stationary vehicles detected in urban speed ranges (except bicycles and motorcycles) -Takes one-sided overtaking restrictions into account on highways or on multi-lane divided highways (country-dependent) % On the DYNAMIC SELECT menu, it is possible to set the driving mode of Active Distance Assist DISTRONIC. Depending on which drive program is selected, the driving characteris­tics can be geared towards energy economy, comfort or dynamic performance. On the Active Distance Assist menu, the driving style can be permanently set to Comfort or Dynamic (/ page 229). Vehicles with Active Parking Assist and Driving Assistance Package: if Active Distance Assist DISTRONIC has braked the vehicle to a standstill, the vehicle can automatically follow the vehicle in front if it drives off again within 30 seconds. If a critical situation is detected in the surrounding area when the vehicle drives off, such as a person in the vehicle path, a visual and acoustic warning will be issued indicating that the driver must now take control of the vehicle. The vehicle will not be accelerated any further. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). 1 Vehicle in front 2 Distance indicator 3 Set specified distance A vehicle detected in front 1 will be highlighted in green. It may also be in the lane to the left of your vehicle in situations where it is not permitted to overtake on the right, such as on highways. Permanent status display R ç (grey): Active Distance Assist DISTRONIC selected but not yet active R ç (green speedometer, white vehicle): Active Distance Assist DISTRONIC active, speed set R ç (green): Active Distance Assist DISTRONIC active and vehicle detected The stored speed is shown under the permanent status display and highlighted on the speedome­ter. When Active Distance Assist DISTRONIC is passive, the status display will be greyed out. If the speed of the vehicle in front or the speed adjustment is less than the stored speed due to the route event ahead, the segments on the speedometer will light up. When the set specified distance is increased or decreased, the Ò display will briefly appear under the vehicle on the permanent status dis­play. % On highways or high-speed major roads, the green ç vehicle symbol will be displayed cyclically when the vehicle is ready to pull away. % If you depress the accelerator pedal beyond the setting for Active Distance Assist DISTRONIC, the system will be switched to passive mode. The following message will appear briefly on the driver's display ç Suspended. System limits The system may be impaired or may not function in the following situations, for example: R In snow, rain, fog, heavy spray, if there is glare, in direct sunlight or in greatly varying ambient light. R The windshield in the area of the camera is dirty, fogged up, damaged or obscured. R If the radar sensors are dirty or covered. R In parking garages or on roads with steep uphill or downhill gradients. R If there are narrow vehicles in front, such as bicycles or motorcycles. In addition, on slippery roads, braking or acceler­ating may cause one or several wheels to lose traction and the vehicle could then skid. Do not use Active Distance Assist DISTRONIC in these situations. & WARNING Risk of accident from accelera­tion or braking by Active Distance Assist DISTRONIC Active Distance Assist DISTRONIC may accel­erate or brake in the following cases, for example: R If the vehicle pulls away using Active Dis­tance Assist DISTRONIC. R If the stored speed is called up and is con­siderably faster or slower than the cur­rently driven speed. R If Active Distance Assist DISTRONIC no longer detects a vehicle in front or does not react to relevant objects. # Always carefully observe the traffic con­ditions and be ready to brake at all times. # Take into account the traffic situation before calling up the stored speed. & WARNING Risk of accident due to insuffi­cient deceleration by Active Distance Assist DISTRONIC Active Distance Assist DISTRONIC brakes your vehicle with up to 50% of the possible deceler­ation. If this deceleration is not sufficient, Active Distance Assist DISTRONIC alerts you with a visual and acoustic warning. # Adjust your speed and maintain a suita­ble distance from the vehicle in front. # Brake the vehicle yourself and/or take evasive action. & WARNING Risk of accident if detection function of Active Distance Assist DISTRONIC is impaired Active Distance Assist DISTRONIC does not react or has a limited reaction: R when driving on a different lane or when changing lanes R to pedestrians, animals, bicycles or sta­tionary vehicles, or unexpected obstacles R to complex traffic conditions R to oncoming vehicles and crossing traffic As a result, Active Distance Assist DISTRONIC may neither give warnings nor intervene in such situations. # Always observe the traffic conditions carefully and react accordingly. ¦Operating Active Distance Assist DISTRONIC Requirements: R The electric parking brake is released. R ESP® is activated and is not intervening. R The transmission is in position h. R All the doors are closed. R Check of the radar sensor system has been successfully completed. R Snow chain mode is not active (/ page 371). J Adopts the stored/detected speed ± Deactivating Active Distance Assist DISTRONIC 1 Increases/decreases the speed K Increases/decreases the specified distance H Activates/deactivates Active Distance Assist DISTRONIC # To operate Active Distance Assist DISTRONIC: press the respective button with only one finger or swipe on the control panel. Activates/deactivates Active Distance Assist DISTRONIC # Press H. Activating Active Distance Assist DISTRONIC # To activate without a stored speed: on control panel 1 press M on the upper section or N on the lower section or J. Remove your foot from the accelerator pedal. or # To activate with a stored speed: pressJ. Remove your foot from the accelerator pedal. The last stored speed is called up and main­tained by the vehicle. If the stored speed has been deleted, the cur­ rent vehicle speed is stored. Increasing or reducing the speed # To increase the stored speed: swipe upwards from the bottom of control panel 1. R The stored speed is increased by 1 mph (1 km/h). # To decrease the stored speed: swipe down­wards from the top of control panel 1. R The stored speed is decreased by 1 mph (1 km/h). or # Briefly press M on the upper section or N on the lower section of control panel 1. The stored speed is increased or reduced by 5 mph (10 km/h). or # Accelerate the vehicle to the desired speed. # Press M on the upper section of control panel 1. Adopting the limit speed shown in the driver's dis­play # Activate the Active Distance Assist DISTRONIC: Press M, N or J. # Accept the displayed speed limit: press J. The limit speed displayed in the driver's dis­play is adopted as the stored speed. The vehi­cle adapts its speed to that of the vehicle in front, but only up to the stored speed, or limits its speed accordingly. % A speed limit shown in the driver display is only adopted while driving, not when station­ary. Pulling away with Active Distance Assist DISTRONIC # Activate Active Distance Assist DISTRONIC and remove your foot from the brake pedal. # Press J. or # Depress the accelerator pedal briefly and firmly. The functions of Active Distance Assist DISTRONIC continue to be carried out. Reducing or increasing the specified distance from the vehicle in front # Press K. The h display appears. The specified dis­tance is reduced by one level. If the lowest level is already selected, the selection jumps to the highest level. Deactivating Active Distance Assist DISTRONIC & WARNING Risk of an accident due to Active Distance Assist DISTRONIC being active when you leave the driver's seat If you leave the driver's seat while the vehicle is being braked by Active Distance Assist DISTRONIC only, the vehicle can roll away. # Always deactivate Active Distance Assist DISTRONIC and secure the vehicle to prevent it from rolling away before you leave the driver's seat. # Press ±. % If you brake, deactivate ESP® or if ESP® inter­ venes, Active Distance Assist DISTRONIC is deactivated. ¦Function of Active Speed Limit Assist If a change in the speed limit of 12 mph (20 km/h) or more is detected and automatic adoption of speed limits is activated, the new speed limit is automatically adopted as the stored speed (/ page 229). The driven speed is adjusted when the vehicle is level with the traffic sign at the latest. In the case of signs indicating entry into an urban area, the speed is adapted according to the speed permit­ted within the urban area. The speed limit display on the driver's display is always updated when the vehicle is level with the traffic sign. If you are driving on German highways and there is no speed limit, the system uses the speed stored for a stretch of road with no speed limit as the set speed. If you do not alter the stored speed on a stretch of road with no speed limit, the rec­ommended speed of 80 mph (130 km/h) is adop­ted. If Active Distance Assist DISTRONIC has been put into passive mode by pressing the accelerator pedal, only speed limits which are higher than the set speed are adopted. The maximum permissible speed does not take the road condition and current weather and traffic conditions into account. Adjust your speed accordingly, when necessary. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). System limits The system limits of Traffic Sign Assist apply to the detection of traffic signs (/ page 241). Speed limits below 12 mph (20 km/h) are not automatically adopted by the system as the stored speed. Temporary speed restrictions (e.g. for a certain time or due to weather conditions) cannot be properly detected by the system. The maxi­mum permissible speed applying to a vehicle with a trailer is not detected by the system. Adjust the speed in these situations. & WARNING Risk of accident due to Active Speed Limit Assist adapting the vehicle's speed The speed adopted by Active Speed Limit Assist may be too high or incorrect in some individual cases, such as: R at speed limits below 12 mph (20 km/h) R in wet conditions or in fog R when towing a trailer # Ensure that the driven speed complies with traffic regulations. # Adjust the driving speed to suit current traffic and weather conditions. ¦Function of route-based speed adaptation When Active Distance Assist DISTRONIC is activa­ted, the vehicle speed will be adapted according to the route events ahead. Depending on the drive program selected, the vehicle will negotiate a route event ahead in an energy-saving, comforta­ble or dynamic manner. When the route event has been passed, the vehicle will accelerate again to the stored speed. The set distance to the vehicle in front, vehicles detected ahead and speed restrictions ahead will be taken into account. Route-based speed adaptation can be activated in the multimedia system (/ page 229). The following route events are taken into account: R Bends R Traffic circles R T-intersections R Turns and exits R Traffic jams ahead (only with Live Traffic ) Also, the speed is reduced if the turn signal indi­cator is switched on and one of the following sit­uations is detected: R Turning at intersections R Driving on slowing-down lanes R Driving on lanes adjacent to slowing-down lanes The driver is responsible for choosing the right speed and observing other road users. This applies in particular to intersections, traffic circles and traffic lights, as route-based speed adaptation does not brake the vehicle to a standstill. If a corresponding route event is detected while route guidance is active, the first speed adjust­ment is carried out automatically. If the turn signal indicator is switched on, the selected route is confirmed and further speed adjustment is activa­ted. Speed adaptation is canceled in the following cases: R If the turn signal indicator is switched off before the route event and it is assumed that the route event is not relevant to the driver. R If the driver depresses the accelerator or brake pedal during the process. System limits Route-based speed adaptation does not take right of way regulations into account. The driver is responsible for complying with road traffic regula­tions and driving at a suitable speed. In difficult conditions, the speed selection made by the system may not always be suitable. This applies to the following situations, for example: R The road's course is not clearly visible R Lane narrowing R Varying maximum permissible speeds in indi­ vidual lanes, e.g. at toll stations R Wet road surfaces, snow or ice In these situations the driver must intervene accordingly. & WARNING Risk of accident in spite of route-based speed adaptation Route-based speed adaptation can malfunc­tion or be temporarily unavailable in the fol­lowing situations: R If the driver does not follow the calculated route R If map data is not up-to-date or available R In the event of roadworks R In bad weather or road conditions R If the accelerator pedal is depressed R In the event of electronically displayed speed limitations # Adapt the speed to the traffic situation. ¦Setting Active Distance Assist DISTRONIC driv­ ing styles Requirements: R Active Distance Assist DISTRONIC is activa­ted. Multimedia system: 4 © 5 Settings 5 Assistance 5 Driving 5 Active Distance Assist Selecting a driving style # Select Based on DYNAMIC SELECT, Dynamic or Comfortable. % Further information about Active Distance Assist DISTRONIC (/ page 225). # Select Route Based or Speed limit. When these functions are active, the vehicle speed is adjusted depending on the route events ahead. % When one of the following systems is active, the detected speed can be manually adopted as the speed limit: R Active Distance Assist DISTRONIC R Variable limiter % Further information on speed adaptation (/ page 228). ¦Function of Active Stop-and-Go Assist Active Stop-and-Go Assist helps you when in traf­fic jams on multi-lane roads with separate road­ways by automatically pulling away within up to 60 seconds and with moderate steering maneu­vers. It orients itself using the vehicle in front and lane markings. Active Stop-and-Go Assist auto­matically maintains a safe distance from the vehi­cle in front and vehicles cutting in. Active Stop-and-Go Assist requires you, as the driver, to keep your hands on the steering wheel at all times so that you are able to intervene at any time to correct the course of the vehicle and keep it in lane. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). Active Stop-and-Go Assist activates automatically when all of the following conditions are met: R You are in a traffic jam on a freeway or high-speed major road. R Active Distance Assist DISTRONIC is activated and active (/ page 225). R Active Steering Assist is activated and active (/ page 232). R You are traveling no faster than 35 mph (60 km/h). When Active Stop-and-Go Assist is active the ¬ status display appears on the driver's dis­play. System limits The system limitations of Active Distance Assist DISTRONIC and Active Steering Assist apply to Active Stop-and-Go Assist (/ page 230). Active Steering Assist ¦Function of Active Steering Assist Active Steering Assist is only available up to a speed of 130 mph (210 km/h). The system helps you to stay in the center of the lane when driving by means of moderate steering interventions. Depending on the speed driven, Active Steering Assist uses the vehicles ahead and lane markings as a reference. % Depending on the country, in the lower speed range Active Steering Assist can use the sur­rounding traffic as a reference. If necessary, Active Steering Assist can then also provide assistance when driving outside the center of the lane by means of a driving style. If the detection of lane markings and vehicles ahead is impaired, Active Steering Assist switches to passive mode. The system provides no support in this case. Permanent status display on the driver's display Ø Gray: activated and passive Ø Green: activated and active Ø Red, flashing: prompt to the driver to actively confirm or transition from active to passive status, system limit detected % During the transition from active to passive status, the Ø symbol is shown as enlarged and flashing. Once the system is passive, the Ø symbol is shown as gray on the driver's display. Touch detection The driver is required to keep their hands on the steering wheel at all times and be able to inter­vene at any time to correct the course of the vehi­cle and keep it in lane. The driver must expect a change from active to passive mode or vice versa at any time. If the system detects that the driver has not steered the vehicle for a considerable period of time or has removed their hands from the steering wheel, an optical warning is given first. Display 1 appears on the driver's display. If the driver still does not steer the vehicle, or gives no confirma­tion to the system, a warning tone sounds in addi­tion to the visual warning message. If the driver does not react to this warning for a considerable period, an emergency stop is initi­ated (/ page 232). The warning is not issued or is stopped as soon as the system detects that the driver has touched the steering wheel. Touch detection may be limited or inoperative in the following situations: R The driver is wearing gloves. R There is a steering wheel cover on the steering wheel. If Active Steering Assist detects that a system limit has been reached, a visual warning is issued and a warning tone sounds. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). System limits Active Steering Assist has a limited steering tor­que for lateral guidance. In some cases, the steer­ing intervention is not sufficient to keep the vehi­cle in the lane. The system may be impaired or may not function in the following instances: R Visibility is poor, e.g. due to snow, rain, fog, heavy spray, greatly varying ambient light or strong shadows on the road. R There is glare, e.g. from oncoming traffic, direct sunlight or reflections. R Insufficient illumination of the road. R The windshield is dirty, fogged up, damaged or covered, e.g. by a sticker, in the vicinity of the camera. R No, or several unclear, lane markings are pres­ent for one lane, or the markings change quickly, e.g. in a construction area or at inter­sections. R The lane markings are worn away, dark or cov­ered up, e.g. by dirt or snow. R If the distance to the vehicle in front is too short and thus the lane markings cannot be detected. R The road is narrow and winding. R There are obstacles on the lane or projecting out into the lane, such as object markers. The system does not provide assistance in the fol­lowing conditions: R On very tight bends and when turning. R When crossing intersections. R At traffic circles or toll stations. R When actively changing lane without switching on the turn signal indicator. R When the tire pressure is too low. & WARNING Risk of accident if Active Steer­ing Assist unexpectedly stops functioning If the system limits of Active Steering Assist are reached there is no guarantee that the system will remain active or will keep the vehi­cle in lane. # Always keep your hands on the steering wheel and observe the traffic carefully. # Always steer the vehicle paying attention to traffic conditions. & WARNING Risk of accident if Active Steer­ing Assist unexpectedly intervenes The detection of lane markings and objects may malfunction and cause unexpected steer­ing interventions. # Steer according to traffic conditions. ¦Activating/deactivating Active Steering Assist Requirements R ESP® is activated, but is not intervening. R Active Distance Assist DISTRONIC is activa­ ted. Multimedia system: 4 © 5 Settings 5 Assistance 5 Driving # Activate or deactivate Active Steering Assist. Function of Active Emergency Stop Assist Active Emergency Stop Assist monitors the steer­ing wheel as well as the accelerator and brake pedals. If the system detects a lack of driver activ­ity and the vehicle threatens to leave the lane, a warning can be issued and an emergency stop ini­tiated. Vehicles without Driving Assistance Package: The system is available from a speed of approx. 37 mph (60 km/h). Vehicles with Driving Assistance package: If Active Steering Assist is switched off, the system is available from a speed of approx. 37 mph (60 km/h). If the vehicle is threatening to leave the lane, a warning is issued in the following cases: R The driver does not touch the steering wheel for a longer period of time or no steering movement can be measured for a longer period of time (depending on the vehicle equipment). R Neither the accelerator nor the brake pedal is depressed. % Vehicles with Driving Assistance package: if Active Steering Assist is switched on and active, only the steering wheel is monitored by the system. If the driver does not touch the steering wheel for a longer period of time, a warning may be issued despite pedal actua­tion. Also observe the instructions on the touch detection of Active Steering Assist (/ page 230). Active Emergency Stop Assist issues the following warnings in order: R Display message 1 appears on the driver's display. R In addition to display 1 a warning tone sounds. R The message Beginning Emergency Stop will appear on the driver's display, a continuous warning tone will sound, the vehicle will no longer accelerate and, if necessary, slight belt tensioning will be produced. R The vehicle speed is reduced in increments until it is at a standstill. Sharp brake impulses are also produced. % Vehicles with Driving Assistance Package: If Active Distance Assist DISTRONIC is active and the driver unfastens the seat belt and opens the driver's door, an emergency stop can be initiated immediately. Vehicles with Driving Assistance Package: Depending on the country, a lane change to the adjacent right-hand lane is carried out, if possible. It is only possible to change across one lane and only into the right-hand lane, and not onto the hard shoulder. When automatic braking is initiated, Active Dis­tance Assist DISTRONIC is deactivated. Depend­ing on the country, the hazard warning light sys­tem is switched on. When the vehicle is stationary, the following actions are carried out: R The vehicle is secured with the electric park­ing brake. R The vehicle is unlocked. R If possible, an emergency call is placed to the Mercedes-Benz emergency call center. Before automatic braking is initiated, you can can­ cel Active Emergency Stop Assist by steering. You can cancel the intervention by Active Emer­gency Stop Assist after automatic braking is initi­ated with one of the following actions: R Accelerating or braking: the emergency stop is canceled, but the warning message, warning tone and power steering remain active R Steering: power-assisted steering is canceled, the warning message and warning tone remain active and the vehicle continues to be braked % Active Emergency Stop Assist can initiate an emergency stop a maximum of three times within a driving cycle. After that, Active Steer­ing Assist and Active Emergency Stop Assist are disabled until the vehicle has been restar­ted. System limits For the detection of vehicles and other obstacles, observe the system limits of the following func­tions: R Active Distance Assist DISTRONIC (/ page 223) R Active Steering Assist (/ page 230) R Active Lane Change Assist (/ page 234) R Active Brake Assist (/ page 236) Vehicles without Driving Assistance Package: Active Emergency Stop Assist is inactive in the fol­lowing cases: R Active Lane Keeping Assist has reached a sys­tem limit. R Active Lane Keeping Assist is not operational (gray status display) or deactivated (white sta­tus display) (/ page 251). Active Lane Change Assist ¦Function of Active Lane Change Assist Active Lane Change Assist supports the driver when changing lanes and is activated by indicat­ing briefly. For this, the following conditions must be fulfilled: R You are on a freeway or high-speed major road. R The vehicle speed is between approximately 45 mph (70 km/h) and 110 mph (180 km/h). R The neighboring lane is separated by a broken lane marking. R No vehicle or obstacle is detected in the adja­cent lane. R Active Lane Change Assist is selected in the multimedia system. R Active Distance Assist DISTRONIC and Active Steering Assist are switched on and active. Display on the driver's display in the Assistance menu 1Green arrow: lane change initiated2Red arrow: lane change canceledWhen Active Lane Change Assist is available, the± display appears along with green arrows onthe driver's display. If the system has been activa-ted but is not currently available, the ± displayappears along with gray arrows on the driver's display. If no vehicle or obstacle is detected in the adja­cent lane and a lane change is permitted, the lane change begins after the driver has indicated briefly. The lane change is shown to the driver with a flashing green arrow next to the ± steering wheel symbol. Green arrow 1 is dis­played in the appropriate adjacent lane in the Assistance menu on the driver's display. The mes­sage Lane Change to the Left, for example, also appears. If a lane change is not possible directly after the driver has activated the turn signal indicator because an obstacle has been detected, for example, the arrow will also flash in green next to the ± steering wheel symbol and the neigh­boring lane will continue to be monitored. When the lane becomes free, a lane change will be car­ried out and the message Lane Change to the Left, for example, appears on the driver's display. If the green arrows stop flashing, the lane change must be activated again. Active Lane Change Assist can be canceled in var­ ious situations, including the following: R Change in the surrounding conditions (e.g. detected obstacle). R The driver steers with too much force or in the opposite direction. R The driver moves the turn signal indicator in the opposite direction. R Active Distance Assist DISTRONIC or Active Steering Assist is deactivated. R The vehicle cannot make the lane change as planned. Cancellation of Active Lane Change Assist is shown as follows: R The arrow in the selected direction of travel turns red. R A corresponding message will also appear on the driver's display. R In certain circumstances a warning tone sounds. Lane Change Assist cannot always clearly detect if the adjacent lane is free. The lane change might be initiated although the adjacent lane is not free. # Before changing lanes, make sure that the neighboring lane is free and there is no danger to other road users. # Monitor the lane change. & WARNING Risk of accident if Lane Change Assist unexpectedly stops functioning If the system limitations for Lane Change Assist have been reached, there is no guaran­tee that the system will remain active. Lane Change Assist cannot then assist you by applying steering torque. # Always monitor the lane change and keep your hands on the steering wheel. Observe the traffic conditions and steer and/or brake if necessary. System limits The system limitations of Active Steering Assist apply to Active Lane Change Assist (/ page 230). The system may also be impaired or may not func­tion in the following situations: R The sensors are damaged, covered or dirty (/ page 212). R The exterior lighting shows a defect. R The system does not detect a suitable road, for example, on tight bends. R The vehicle is on a construction site. % The Active Lane Change Assist sensors adjust automatically while a certain distance is being driven after the vehicle has been delivered. Active Lane Change Assist is unavailable or only partially available during this teach-in process, and no arrows are displayed next to the Active Steering Assist symbol Ø. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). ¦Selecting Active Lane Change Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Driving # Select Aktiver Spurwechsel-Assistent (Active Lane Change Assist). Active Brake Assist ¦Function of Active Brake Assist Active Brake Assist consists of the following func­tions: R Collision warning R Autonomous braking function R Situation-dependent braking assistance R Vehicles with Driving Assistance Package and Active Steering Assist: Evasive Steering Assist Active Brake Assist can help you to minimize the risk of a collision with vehicles, cyclists or pedes­trians or to reduce the effects of such a collision. If Active Brake Assist has detected a risk of colli­sion, a warning tone sounds and the Ldis­tance warning lamp lights up. In the Assistance menu, an insufficient distance 1 to the vehicle in front is displayed in red. If you further reduce the distance, the vehicle in front is also highlighted in red. When the system detects a risk of collision, red radar waves 2 appear in front of the vehicle. % Vehicles with PRE-SAFE®: depending on the country, an additional haptic warning occurs in the form of slight, repeated tensioning of the seat belt. % Vehicles with active ambient lighting: if Warn­ing Support is activated, the Active Brake Assist warning is also accompanied by ambi­ent lighting (/ page 147). If you do not react to the warning, autonomous braking can be initiated in critical situations. In particularly critical situations, Active Brake Assist can also initiate autonomous braking directly. In this case, the warning lamp and warn­ing tone occur simultaneously with the braking application. If you apply the brake yourself in a critical situa­tion or apply the brake during autonomous brak­ing, situation-dependent braking assistance occurs. The brake pressure increases up to maxi­mum full-stop braking if necessary. If autonomous braking or situation-dependent braking assistance has occurred, pop up 1 appears in the driver's display and then automati­cally goes out after a short time. If the autonomous braking function or the situa­tion-dependent braking assistance is triggered, additional preventive measures for occupant pro­tection (PRE-SAFE®) may also be initiated. & WARNING Risk of an accident caused by limited detection performance of Active Brake Assist Active Brake Assist cannot always clearly iden­tify objects and complex traffic situations. In such cases, Active Brake Assist might: R Give a warning or brake without reason R Not give a warning or not brake Active Brake Assist is only an aid. The driver is responsible for maintaining a sufficiently safe distance to the vehicle in front, vehicle speed and for braking in good time. # Always pay careful attention to the traffic situation; do not rely on Active Brake Assist alone. # Be prepared to brake or swerve if neces­sary. If Active Brake Assist is deactivated or the func­tions are restricted, e.g. due to activation of another driving system, the ê display message appears in the driver's display. If the system is unavailable due to dirty or dam­aged sensors or due to a malfunction, or if the functions are restricted, the Ó warning lamp appears in the driver's display. Also observe the system limits of Active Brake Assist. The individual subfunctions are available in the fol­lowing speed ranges: Collision warning Collision warning can assist you in the following situations from approximately 4 mph (7 km/h) with an intermittent warning tone and the L warning lamp. Vehicles without Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 50 mph (80 km/h) when approaching stationary vehi­cles, pedestrians walking in the direction of travel and cyclists ahead. R At speeds up to approximately 43 mph (70 km/h) when approaching crossing pedes­trians and cyclists. R At speeds up to approximately 37 mph (60 km/h) when approaching stationary pedestrians and cyclists. Vehicles with Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 75 mph (120 km/h) when approaching crossing vehi­cles, pedestrians and cyclists. R At speeds up to approximately 62 mph (100 km/h) when approaching stationary vehicles. R At speeds up to approximately 50 mph (80 km/h) when approaching cyclists ahead. R At speeds up to approximately 43 mph (70 km/h) when approaching stationary pedestrians and cyclists. Autonomous braking function If the vehicle is traveling at speeds above approx­imately 4 mph (7 km/h), the autonomous braking function may intervene in the following situations: Vehicles without Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 50 mph (80 km/h) when approaching cyclists ahead, pedestrians walking in the direction of travel and stationary vehicles. R At speeds up to approximately 43 mph (70 km/h) when approaching crossing pedes­trians and cyclists. Vehicles with Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 75 mph (120 km/h) when approaching crossing vehi­cles, pedestrians and cyclists. R At speeds up to approximately 62 mph (100 km/h) when approaching stationary vehicles. R At speeds up to approximately 50 mph (80 km/h) when approaching cyclists ahead. R At speeds up to approximately 43 mph (70 km/h) when approaching stationary pedestrians and cyclists. Situation-dependent braking assistance If the vehicle is traveling at speeds above approx­imately 4 mph (7 km/h), situation-dependent braking assistance may intervene in the following situations. Vehicles without Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 50 mph (80 km/h) when approaching cyclists ahead, pedestrians walking in the direction of travel and stationary vehicles. R At speeds up to approximately 43 mph (70 km/h) when approaching crossing pedes­trians and cyclists. R At speeds up to approximately 37 mph (60 km/h) when approaching stationary pedestrians and cyclists. Vehicles with Driving Assistance Package: R At speeds up to approximately 155 mph (250 km/h) when approaching vehicles ahead. R At speeds up to approximately 75 mph (120 km/h) when approaching crossing vehi­cles, pedestrians and cyclists. R At speeds up to approximately 62 mph (100 km/h) when approaching stationary vehicles. R At speeds up to approximately 50 mph (80 km/h) when approaching cyclists ahead. R At speeds up to approximately 43 mph (70 km/h) when approaching stationary pedestrians and cyclists. Canceling a brake application of Active Brake Assist You can cancel a brake application of Active Brake Assist at any time by: R Fully depressing the accelerator pedal or with kickdown. R Releasing the brake pedal. Active Brake Assist may cancel the brake applica­tion when one of the following conditions is fulfil­led: R You maneuver to avoid the obstacle. R There is no longer a risk of collision. R An obstacle is no longer detected in front of your vehicle. Reaction to oncoming road users (only vehicles with Driving Assistance Package) Active Brake Assist can also react to detected oncoming road users: R Reaction up to speeds of approximately 62 mph (100 km/h) R Warning for oncoming road users through acoustic warning and warning lamp R Autonomous braking application in order to reduce the severity of an accident Evasive Steering Assist & WARNING Risk of accident despite Eva­sive Steering Assist Evasive Steering Assist cannot always recog­nize objects or complex traffic situations clearly. Moreover, the steering support provided by Evasive Steering Assist is not sufficient to avoid a collision. # Always pay careful attention to the traffic situation; do not rely on Evasive Steering Assist alone. # Be prepared to brake or swerve if neces­sary. # End the support by actively steering in non-critical situations. # Drive at an appropriate speed if there are pedestrians close to the path of your vehicle. Evasive Steering Assist has the following charac­ teristics: R Detection of pedestrians, cyclists and vehi­cles. R Assistance through power-assisted steering if it detects a swerving maneuver. R Activation by an abrupt steering movement during a swerving maneuver. R Assistance during swerving and straightening of the vehicle. R Reaction from a speed of approximately 12 mph (20 km/h) up to a speed of approx­ imately 68 mph (110 km/h). The steering support of Evasive Steering Assist can be canceled at any time by counter steering. System limits Full system performance is not yet available for a short time after switching on the vehicle or after driving off. As long as the functions are restricted, the Æ warning lamp can also be shown in the driver's display. Depending on the environmental conditions, it may take a few minutes before full system performance is available. The system may be impaired or may not function, particularly in the following situations: R In snow, rain, fog, heavy spray, if there is glare, in direct sunlight or in greatly varying ambient light. R If the sensors are dirty, fogged up, damaged or covered. (/ page 212) R If the sensors are impaired due to interference from other radar sources, e.g. strong radar reflections in parking garages. R If a loss of tire pressure or a defective tire has been detected and displayed. R In complex traffic situations where objects cannot always be clearly identified. R If pedestrians, cyclists or vehicles move quickly into the sensor detection range. R If road users are hidden by other objects or are located close to other objects. R If the typical outline of a pedestrian or cyclist cannot be distinguished from the background. R If a pedestrian or cyclist is not detected as such, e.g. due to special clothing or other objects. R If the driver's seat belt is not fastened. R On bends with a tight radius. ¦Setting Active Brake Assist Requirements R The vehicle is switched on. Multimedia system: 4 © 5 Settings 5 Assistance 5 Collision Avoidance # Activate or deactivate the function. % It is recommended that you always leave Active Brake Assist activated. When Active Brake Assist is deactivated, the dis­tance warning function, the autonomous braking function and Evasive Steering Assist will be deac­tivated. % If Active Brake Assist is deactivated, the æ symbol will appear in the status bar on the driver's display, and the system will be reacti­vated the next time the vehicle is started. Setting the time of the brake application warnings # Select Z next to Active Brake Assist. # Select Early, Medium or Late. Traffic Sign Assist ¦Function of Traffic Sign Assist % This function is an on-demand feature (/ page 27). Traffic Sign Assist detects traffic signs with the multifunction camera and compares this with information in the digital navigation map. It assists you by displaying detected speed limits and over­taking restrictions on the driver's display and on the head-up display. The system can issue a warn­ing when you exceed the maximum permissible speed. In some countries, the system can provide you with further functions and can warn you when you are approaching pedestrian crossings or when you are about to drive through stop signs or red lights unintentionally. The camera can also detect and analyze traffic signs with a restriction indicated by an additional sign (e.g. in wet conditions). Traffic Sign Assist shows only selected signs on the driver's display. Actual traffic signs and speed limits have priority over traffic signs and speed limits shown on the driver's display. Also observe the following information: R select a speed adapted to the traffic, sur­roundings and weather conditions R observe actual traffic signs R observe applicable traffic rules and regula­tions Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). Displays on the driver's display 1 Permissible speed 2 Permissible speed when there is a restriction 3 Additional sign with restriction The system can show up to two traffic signs on the driver's display simultaneously. The system always prioritizes displaying speed limits. Only one traffic sign with a maximum permissible speed can be shown on the head-up display. If two speed signs are shown on the driver's display, e.g. when restrictions are detected, the value of left-hand speed limit 1 is always transmitted to the cruise control or Active Distance Assist DISTRONIC for adoption and is shown on the head-up display. Examples of traffic signs that can be displayed Traffic Sign Assist can detect and display the fol­lowing traffic signs 1: R speed limits R end of the speed limit R overtaking restrictions R play streets R recommended speeds Traffic Sign Assist can detect the following addi­tional signs 3 and, if necessary, analyze the rele­vance of the restrictions using other vehicle sen­sors: R wet conditions R slippery road surfaces R fog R temporary restrictions R exits R restrictions for car/trailer combinations Traffic Sign Assist also uses data from the digital street map in the navigation system. When you leave or enter a municipality or change roads, e.g. on a freeway exit or slip road, or after you turn at an intersection, the display on the driver's display can thus be updated without a traffic sign having been detected. Depending on vehicle equipment and the country you are in, the system can also display speed restrictions ahead on the driver's display and on the head-up display. The driver's display can also show the distance to an upcoming lower limit speed. For this purpose, information from the digi­tal road map of the navigation system is used. The Assistance menu can also display a dynamic visu­alization of the speed limits ahead. If Traffic Sign Assist cannot determine the cur­rently applicable maximum permissible speed (e.g. due to a lack of signs), the following display appears on the driver's display: Traffic Sign Assist is not available in all countries. If the vehicle is in a country where Traffic Sign Assist is not supported, this is displayed continu­ously. % Also observe the information on display mes­sages in Traffic Sign Assist (/ page 409). Warning when the maximum permissible speed is exceeded The system can warn you if you unintentionally exceed the maximum permissible speed. To do this, you can specify in the multimedia system by how much the maximum permissible speed can be exceeded before a warning is issued. You can set the warning to visual only (the traffic sign flashes three times on the driver's display) or vis­ual and acoustic, including a warning tone. Additional functions of Traffic Sign Assist (coun­try-specific) Warning for no-entry signs: Traffic Sign Assist can warn you if you drive the wrong way down a sec­tion of road, e.g. on freeway slip roads or one-way streets. Warning at pedestrian crossings: if you approach pedestrian crossings and pedestrians are in the danger zone or are moving towards it, Traffic Sign Assist can warn you up to a speed of approx­imately 44 mph (70 km/h). Warning at stop signs: Traffic Sign Assist can warn you up to a speed of approximately 44 mph (70 km/h) if you are about to drive through a stop sign unintentionally. For this to be possible, the signs must be clear, e.g. if the system detects more than one stop sign or can confirm a stop sign using the digital navigation map. No warning can be issued if several different signs are detec­ted. Warning at red lights: Traffic Sign Assist can warn you up to a speed of approximately 44 mph (70 km/h) if you are about to drive through a red light unintentionally. The following conditions must be fulfilled: R Several traffic lights have been detected. R All traffic lights detected are red. R At least one of the red traffic lights detected is on the front passenger side beside the vehi­cle's own lane. R The traffic lights are in the following sequence (from top to bottom): red, yellow, green. % If the function is available, you can activate or deactivate the warnings at pedestrian cross­ings, stop signs and red lights in the Traffic Sign Assist menu under Further Warnings (/ page 244). System limits The system may be impaired or may not function in the following situations in particular: R If visibility is poor, e.g. due to insufficient illu­mination of the road, highly variable shade conditions, rain, snow, fog, swirling dust or heavy spray. R If there is glare, e.g. from oncoming traffic, direct sunlight or reflections. R If there is dirt on the windshield in the vicinity of the multifunction camera or if the camera is fogged up, damaged or obscured. R If traffic signs are difficult to detect, e.g. because they are dirty, covered, faded, cov­ered with ice, damaged, badly positioned, poorly lit or twisted. R Active traffic signs with LED displays may not be detected correctly or at all due to technical factors, such as transmission frequency. R If the information on the navigation system's digital map is incorrect, incomplete or out of date. R If signage or the road layout is ambiguous, e.g. traffic signs in roadworks, at exits and ramps, in neighboring lanes or parallel roads. R If signs do not conform to the standard. R If signs or road layouts are specific to the country and deviate from the route guidance in the navigation system, e.g. at or beyond construction sites. R After sharp turns and on tight bends, when you pass traffic signs that are outside the camera's field of vision. R If you overtake vehicles with traffic signs that are affixed or attached to them. ¦Setting Traffic Sign Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Assistance 5 Traffic Sign Assist Activating or deactivating the speed warning # Activate or deactivate Speed Limit Warning. Activating or deactivating further functions of Traf­fic Sign Assist # Switch Further Warnings or Additional Acous­tic Warning on or off. Setting the warning threshold This value determines the speed at which a warn­ing is issued when exceeded. # Set the desired speed under Warning Thresh­old. % This function is an on-demand feature (/ page 27). Traffic light view ¦Information about the traffic light view The traffic light view supports the driver when waiting in front of a red light by displaying the camera image on the central display. The camera image is displayed when the driver is the first vehi­cle in front of the red light and faded out when the vehicle drives off. ¦Displaying traffic light view Requirements: R The Traffic Light View option is switched on. R A traffic light view is available. Multimedia system: 4 © 5 Settings 5 Assistance 5 Assistance 5 Traffic Light View % This function is not available in all countries. If the vehicle is in first position at a traffic light, the camera image with traffic light view is shown on the central display. When the vehicle pulls away, the camera image is faded out. # Activate D or deactivate E Traffic Light View. Using other available functions # Select Z. # Select On Request or Automatic. If On Request is set and a traffic light view is available, the Tap Here for Traffic Light View message is displayed. The camera image is shown after confirmation of the message. When Automatic is set, the camera image is automatically displayed when the traffic light view is available. Traffic Light Information service & WARNING Risk of an accident or injury due to distraction, incorrect or missing data The traffic light information display is an aid and cannot replace the observation of the actual driving situation. # Keep the actual traffic situation con­stantly in view when approaching a traf­fic light and when changing lanes. # Avoid looking at the Instrument Display and Head-up Display for a long time. The traffic light icon and countdown of remaining time until the next green phase are shown in the driver display. Example view on the driver's display 1 Traffic light icon and countdown of remaining time until the next green phase time The display is hidden about five seconds before the traffic lights change to green. % The display also goes out in the following cases: R When turning off before the intersection into a cross or side street R When turning before the intersection % The direction arrows are displayed depending on the following functions: R A turn signal is set R A lane is recommended during active route guidance If neither function is active, the remaining time until the next green phase for the lane straight ahead is displayed. % Use of the traffic light information service requires the regular transmission of vehicle positions and driving directions to Mercedes-Benz. The data is immediately anonymized by Mercedes-Benz and forwarded to the provider of the traffic light information service. The vehicle positions and driving directions are deleted after a very short time (a few sec­onds) and are not permanently saved. If you do not want to transmit the vehicle positions and driving directions, you have the following options: R You deactivate the service in the Mercedes me portal. R You have the service deactivated at an authorized Mercedes-Benz Center. % This traffic light information service is only available in certain cities and regions. The function is supported under the following con­ditions: R The vehicle is equipped with a multimedia sys­tem featuring navigation and a communication module with an activated, integrated SIM card. R You have a user account for the Mercedes me Portal. R The vehicle has been connected with the user account. R The navigation services option is available, subscribed to and activated in the Mercedes me Portal. R The traffic light information service is within the scope of the navigation service. The current vehicle position and the direction of travel are transmitted via the communication module and aligned with the data from the traffic light information service provider. The provider gathers data from traffic lights which transmit their changing phases. When the vehicle approaches an inter-section with networked traffic lights, data is transmitted to the vehicle. A set turn signal left or right and lane recommen­dations during active route guidance are taken into account for the display. The service is for information purposes only and is not linked to any other vehicle functions, systems or components. Please note that the displayed data is not available in all traffic areas and may be incorrect. Certain light signal systems automatically adapt their switching times to the current traffic situa­tion. This can lead to a sudden change in the countdown display. The driver's display is shown after selecting the Assistancemenu . If another menu is selected, the traffic light countdown is not displayed. Also observe the following information: R Select a speed adapted to the traffic, sur­ roundings and weather conditions R Observe actual traffic signs R Observe applicable traffic rules and regula­ tions Please observe the notes on driving systems and your responsibility. You could otherwise fail to rec­ognize dangers. System limits The display does not appear in the following situa­tions, for example: R There is no traffic light data available. R The time remaining until the next green phase is less than ten seconds. R Emergency vehicles or local public transport are located in the vicinity of the intersection. R The data transmission from the vehicle has been interrupted. R Light signal systems are located in a construc­tion site area or are being maintained. R The light signal system is malfunctioning. R The subscription to the service has expired. Blind Spot Assist and Active Blind Spot Assist ¦Function of Blind Spot Assist and Active Blind Spot Assist with exit warning Blind Spot Assist and Active Blind Spot Assist use radar sensors to monitor the area up to 130 ft (40 m) behind and 10 ft (3 m) next to your vehicle. The system can detect vehicles traveling from speeds of approximately 8 mph (12 km/h) and issue a warning if they move into the monitoring range. Status display in the driver's display ¸ Gray: the system is activated but inopera­tive. ¸ Green: the system is activated and opera­tional. Display in the driver's display in the Assistance menu If a vehicle is detected at speeds above approx­imately 8 mph (12 km/h) and this vehicle enters the warning range immediately afterwards, the warning lamp in the corresponding outside mirror lights up red. In the Assistance menu, the lamp in outside mirror 1 also lights up red, and the lane in which the vehicle is detected is hatched out. If a vehicle is detected in the warning range and you switch on the turn signal indicator in the cor­responding direction, a double warning tone sounds once, and the warning lamp flashes red in the corresponding outside mirror. Red radar waves 2 are displayed next to your vehicle in the assistance graphic. If the turn signal indicator remains on, the display in the outside mirror flashes for all other detected vehicles, but no further warning tone sounds. If you overtake a vehicle quickly, no warning is given. Observe the notes on driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). & WARNING Risk of accident despite Blind Spot Assist Blind Spot Assist does not react to vehicles approaching and overtaking you at a greatly different speed. Blind Spot Assist cannot warn drivers in this situation. # Always pay careful attention to the traffic situation and maintain a safe distance at the side of the vehicle. Exit warning The exit warning is an additional function of Blind Spot Assist and Active Blind Spot Assist and can warn vehicle occupants attempting to leave a sta­tionary vehicle about approaching vehicles. & WARNING Risk of accident despite exit warning The exit warning neither reacts to stationary objects nor to persons or road users approaching you at a greatly differing speed. The exit warning cannot warn drivers in these situations. # Always pay particular attention to the traffic situation when opening the doors and make sure there is sufficient clear­ance. If a vehicle is detected in the monitoring range, the red warning lamp lights up in the correspond­ing outside mirror. If a vehicle occupant pulls the door handle on the side of the warning, a warning tone sounds twice and the ambient lighting in the respective door and the warning lamps in the corresponding out­side mirror flash red. % Vehicles with ambient lighting: the Warning Support of the ambient lighting can be activa­ted and deactivated (/ page 147). % The warning assistance can differ depending on the equipment and may vary according to the setting. This exit warning is only available when Blind Spot Assist is active. After the vehicle is switched off, the exit warning continues to function for a few minutes. When the outside mirror warning lamp flashes three times, the exit warning is no longer available. The exit warning is only an aid and not a substi­tute for the attention of vehicle occupants. The responsibility for opening and closing the doors and for leaving the vehicle remains with the vehi­cle occupants. System limits Blind Spot Assist and Active Blind Spot Assist may be limited in the following situations, in particular: R if there is dirt on the sensors or the sensors are obscured R in poor visibility, e.g. due to fog, heavy rain or snow R if there are narrow vehicles, e.g. bicycles or motorbikes R if the road has very wide or narrow lanes R if vehicles are not driving in the middle of their lane Warnings may be issued in error when driving close to crash barriers or similar continuous lane borders. Always make sure that there is sufficient distance to the side for other traffic or obstacles. Warnings may be interrupted when driving along­side long vehicles, for example trucks, for a pro­longed time. Blind Spot Assist and Active Blind Spot Assist are not operational when reverse gear is engaged. Additionally, the exit warning may be limited in the following situations: R when the sensors are covered by adjacent vehicles in narrow parking spaces R when people approach the vehicle R in the event of stationary or slowly moving objects ¦Function of the brake application of Active Blind Spot Assist % The brake application function is available only for vehicles with a Driving Assistance Package. If Active Blind Spot Assist detects a risk of a side impact in the monitoring range, a course-correct­ing brake application is performed. This is designed to help you avoid a collision. The course-correcting brake application is availa­ble in the speed range between approximately 20 mph (30 km/h) and 125 mph (200 km/h). A course-correcting brake application cannot always prevent a collision. # Always steer, brake or accelerate your­self, especially if Active Blind Spot Assist warns you or makes a course-correcting brake application. # Always maintain a safe distance at the sides. & WARNING Risk of accident despite Active Blind Spot Assist Active Blind Spot Assist does not react in the following situations: R If you overtake vehicles at a high speed. R If vehicles approach and overtake you at a greatly different speed. Active Blind Spot Assist may not give warnings or intervene in such situations. # Always pay careful attention to the traffic situation and maintain a safe distance at the side of the vehicle. If a course-correcting brake application occurs, the red warning lamp flashes in the outside mirror and a warning tone sounds. In addition, a display 1 indicating the danger of a side collision appears in the driver's display. In rare cases, the system may make an inappro­priate brake application. This brake application may be interrupted at any time if you steer slightly in the opposite direction or accelerate. System limits Either a course-correcting brake application appropriate to the driving situation, or none at all, may occur especially in the following situations: R Vehicles or obstacles, e.g. crash barriers, are located on both sides of your vehicle. R A vehicle approaches too closely on the side. R You have adopted a sporty driving style with high cornering speeds. R You brake or accelerate significantly. R A driving safety system intervenes, e.g. ESP® or Active Brake Assist. R ESP® is deactivated. R A loss of tire pressure or a defective tire is detected. ¦Activating/deactivating Blind Spot Assist or Active Blind Spot Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Collision Avoidance # Activate or deactivate Active Blind Spot Assist. Active Lane Keeping Assist ¦Function of Active Lane Keeping Assist Active Lane Keeping Assist monitors the area in front of your vehicle by means of the multifunction camera (/ page 212) and can warn you before you leave your lane unintentionally. The system can guide you back into your lane through a course-correcting steering intervention and addi­tionally warns you with vibration pulses in the steering wheel. Active Lane Keeping Assist is available in the speed range between 37 mph (60 km/h) and 124 mph (200 km/h). The system can intervene in the following situa­tions: R Active Lane Keeping Assist detects a lane marking. R One of your front wheels goes over a lane marking. If you activate the turn signal indicator, a steering intervention does not occur on the corresponding side. If you leave the lane without activating the turn signal indicator, but danger of a collision with a moving obstacle is detected in your lane, a steer­ing intervention does not occur. Vehicles with Blind Spot Assist or Driving Assis­tance Package: if the system detects an obstacle, such as another vehicle in the adjacent lane, a steering intervention will occur regardless of the turn signal indicator. Display 1 will appear in the driver's display and a warning tone will sound in the following situations: R A steering intervention by Active Lane Keeping Assist lasts longer than approximately ten sec­onds. R The system carries out two or more steering interventions within approximately three minutes without any steering intervention from the driver. In the Active Lane Keeping Assist settings, you can set the sensitivity of the system and set the level of support. Additionally, you can set whether the system should react to discontinuous lane markings or only continuous lane markings (/ page 253). Status displays for Active Lane Keeping Assist ï White: Active Lane Keeping Assist is deac­tivated. If ESP® is deactivated or a tire pressure loss warning is displayed, Active Lane Keeping Assist is automatically deactiva­ted. ï Yellow: there is a malfunction. Please also observe the display messages. ð Gray: Active Lane Keeping Assist is activa­ted but not operating. ð Green: Active Lane Keeping Assist is acti­vated and operating. If the system is opera­tional on only one side, the lane marking is shown in green on the corresponding side. ð Red: Active Lane Keeping Assist has gui­ded you back into your lane with a course-correcting steering intervention. The status display will flash if there is also a haptic warning in the steering wheel. The lane marking is shown in red only on the side for which there is a warning. Vehicles without Driving Assistance Pack­age: if both lane markings are simultane­ously shown in red in the status display, Active Lane Keeping Assist has initiated an emergency stop (/ page 232). Active Lane Change Assist display in the "Assis­tance" menu If the front wheel of the vehicle drives over a detected lane marking, this will be highlighted red in the Assistance menu in the driver's display. % Vehicles with active ambient lighting: if Warn­ing Support is activated, the Active Lane Keeping Assist warning is also accompanied by ambient lighting (/ page 147). System limits In the following situations, a lane-correcting steer­ing intervention may not occur but rather a warn­ing may be given on the steering wheel, depend­ing on the situation: R You clearly and actively steer, brake or accel­erate. R If a driving safety system intervenes, such as ESP®, Active Brake Assist or Active Blind Spot Assist. R You have adopted a sporty driving style with high cornering speeds or high rates of acceler­ation. R If transport equipment, for example a trailer or bicycle rack, is attached to the trailer hitch and the electrical connection has been cor­ rectly established. The system may be impaired or may not function particularly in the following situations: R If there is poor visibility, e.g. due to insufficient illumination of the road, highly variable shade conditions, rain, snow, fog or heavy spray. R If there is glare, e.g. from oncoming traffic, the sun or reflections. R If there is dirt on the windshield in the vicinity of the multifunction camera or if the camera is fogged up, damaged or obscured. R If there is dirt on the bumper in the area of the radar sensors, or if they are damaged or cov­ered. R If there are no lane markings, or several unclear lane markings are present for one lane, e.g. around roadworks. R If the lane markings are worn, dark or cov­ered. R If the distance to the vehicle in front is too short and thus the lane markings cannot be detected. R If the lane markings change quickly, e.g. lanes branch off, cross one another or merge. R If the road is very narrow and winding. Read the information concerning driving systems and your responsibility; you may otherwise fail to recognize dangers (/ page 211). ¦Activating/deactivating Active Lane Keeping Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Collision Avoidance 5 Active Lane Keeping Assist # Activate or deactivate the function. Alternatively, Active Lane Keeping Assist can be activated and deactivated via quick-access. % After starting the vehicle, the settings are country-specific. ¦Setting Active Lane Keeping Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Collision Avoidance 5 Active Lane Keeping Assist Setting the sensitivity # Select Z. # Select Early, Med. or Late. The last selected setting will be adopted the next time the vehicle is started. % The standard setting for this function is dependent on the country. Activating or deactivating assistance on discontin­uous lane markings # Select Advanced Support. The last selected setting will be adopted the next time the vehicle is started. % The standard setting for this function is dependent on the country. % This function must be activated in vehicles without Driving Assistance Package, so that Emergency Stop Assist is fully available. Further information on Emergency Stop Assist (/ page 232) AIRMATIC ¦Function of AIRMATIC AIRMATIC is an air suspension system with varia­ble damping for improved driving comfort. The all-round level control system ensures the best possi­ble suspension and constant ground clearance, even with a laden vehicle. When driving at speed, the vehicle is lowered automatically to improve driving safety and to reduce energy consumption. AIRMATIC includes the following components and functions: R air suspension with automatic all-round level control R ADS PLUS (Adaptive Damping System with constant damping force adjustment) R speed-dependent lowering of the vehicle level R a firmer, sporty suspension setting in drive program C R lowering the vehicle at speeds above 75 mph (120 km/h) in order to reduce energy con­sumption When driving at speeds below 50 mph (80 km/h), the vehicle is raised again to the normal level. Rear view camera ¦Function of the rear view camera The rear view camera monitors the area behind your vehicle. When you engage reverse gear, the image from the rear view camera is automatically shown on the central display. The rear view camera is only an aid. It is not a substitute for your attention to the surroundings. The responsibility for safe maneuvering and park­ing remains with you. Make sure that there are no persons, animals or objects in the maneuvering area while maneuvering and parking. % The area behind the vehicle is displayed as a mirror image, as in the inside rearview mirror. Camera Views menu (top view)1Parking Assistance menu2Rear view camera with top view3Wide-angle view4Activates/deactivates Parking AssistPARKTRONIC (/ page 263)5 Warning display of Parking Assist PARKTRONIC (/ page 260) 6 Guide lines at a distance of approximately 1.6 ft (0.5 m), 3.3 ft (1.0 m), 5 ft (1.5 m) and 9.9 ft (3.0 m) from the rear area 7 Path marking the course the tires will take with the current steering wheel angle (dynamic) 8 Area driven over depending on the current steering wheel angle (dynamic) 9 Guide line at a distance of approximately 1.0 ft (0.3 m) from the rear area % When Active Parking Assist is active, lanes 7 are displayed in green (/ page 264). Wide-angle viewSystem limitsIf the system is not ready for operation, the Sys-tem Inoperative message appears on the centraldisplay.The rear view camera will not function or will only function to a limited extent in the following situa­tions: R You are driving forwards at a speed greater than approximately 10 mph (16 km/h). R The tailgate is open. R The weather conditions are poor, e.g. heavy rain, snow, fog, storm or spray. R The ambient light is poor, e.g. at night or if light is shining into the camera. R The camera lens is obstructed, dirty or fogged up. Observe the notes on cleaning the rear view camera (/ page 348). R The camera or rear of your vehicle is dam­aged. In this case, have the camera and its position and setting checked at a qualified specialist workshop. R The detection range is limited by additional vehicle attachments at the rear, such as a license plate bracket or bicycle rack. Also observe the information on vehicle sensors and cameras (/ page 212). % Do not use the rear view camera in these types of situations. You could otherwise injure others or collide with objects when parking the vehicle. % The contrast of the display may be impaired by direct sunlight or by other light sources, e.g. when driving out of a garage. In this case, pay particular attention. % Have the display repaired or replaced if pixel errors considerably restrict its use, for exam­ple. 360° camera ¦Function of the 360° Camera The 360° Camera is a system that consists of four cameras which cover the immediate sur­roundings of the vehicle. The cameras assist you when you are parking, forexample, or at exits with reduced visibility. The 360° Camera includes the following cameras and evaluates their images: R Rear view camera R Front camera The cameras are only an aid and may show a dis­torted view of obstacles, show them incorrectly or not show them at all. They are not a substitute for your attention to the surroundings. The responsi­bility for safe maneuvering and parking remains with you. Make sure that there are no persons, animals, objects, etc. in the maneuvering area while maneuvering and parking. Menu overview Camera Views 1 Menu Parking Assistance 2 Top view with image from the front camera 3 Top view with image from the rear view cam­ era 4 3D view, left-hand side of the vehicle 5 3D view, right-hand side of the vehicle 6 3D auto view 7 To activate/deactivate Parking Assist PARKTRONIC (/ page 263) 8 To set the GPS activation point (/ page 259) 9 To switch between standard and wide-angle view % In all views, the Parking Assist PARKTRONIC warning display is shown (/ page 260). Function of the guide lines 1 Guide lines at a distance of approximately 1.6 ft (0.5 m), 3.3 ft (1.0 m), 5 ft (1.5 m) and 9.9 ft (3.0 m) from the rear area 2 Path marking the course that the tires will take with the current steering wheel angle (dynamic) 3 Driven surface depending on the current steering wheel angle (dynamic) 4 Guide line at a distance of approximately 1.0 ft (0.3 m) from the rear area % When Active Parking Assist is active, lanes and guide lines are displayed in green instead of yellow (/ page 264). Top view with image from the front or rear view camera 3D view, left/right-hand side of the vehicle 1Warning display of Parking AssistPARKTRONIC (/ page 260)2Your vehicle from above3Lane indicating the route the vehicle will takeat the current steering angle* NOTE Risk of accident due to objects being severely distorted in the display or not displayed at all Due to the projection of the cameras, objects in the 3D views may be severely distorted when displayed or not displayed at all. # Make sure that there are no persons, animals or objects etc. in the maneuver­ing area while maneuvering and parking. 1Display of Parking Assist PARKTRONIC(/ page 260)In the 3D view, left-/right-hand side of the vehi­cle, the virtual camera moves to the respective side of the vehicle. When you change the trans­mission position, the view is automatically adap­ted. 3D auto view % The area behind the vehicle is not displayed as a mirror image as is usual in the 3D views. 1Display of Parking Assist PARKTRONIC(/ page 260)2Guide linesIn the 3D auto view, the virtual camera moves tothe standard perspective, facing forward from therear above the roof. The view changes automati­ cally when approaching obstacles. If you touch the touchscreen, the view changes to 3D view with free rotation. You can turn, tilt and zoom the views by touch. Wide-angle view System limits 1Display of Parking Assist PARKTRONIC(/ page 260)2To switch between standard and wide-angleviewIf the system is not ready for operation, the Sys­tem Inoperative message appears in the central display. The 360° Camera will not function or will only partially function in the following situations: R You are driving forwards at a speed greater than approximately 10 mph (16 km/h). R The doors are open. R An outside mirror is not completely folded out. R The trunk lid is open. R The weather conditions are poor, e.g. heavy rain, snow, fog, storm or spray. R The ambient light is poor, e.g. at night or if light is shining into the camera. R The camera lens is obstructed, dirty or fogged up. R If cameras or vehicle components in which the cameras are installed are damaged. In this event, have the cameras, their positions and their setting checked at a qualified specialist workshop. % Do not use the 360° Camera under such cir­cumstances. You could otherwise injure oth­ers or collide with objects when parking the vehicle. For technical reasons, the standard height of the vehicle may be altered if the vehicle is carrying a heavy load and can result in inaccuracies in the guide lines and in the display of the generated images. The field of vision and other functions of the cam­era system may be restricted due to additional attachments on the vehicle (e.g. license plate bracket, bicycle rack). % The contrast of the display may be impaired by abrupt, direct sunlight or by other light sources, e.g. when driving out of a garage. In this case, pay particular attention. % Have the display repaired or replaced if, forexample, pixel errors considerably restrict its use. See the notes on cleaning the 360° Camera (/ page 348). ¦Calling up the 360° camera views using the button % Depending on the vehicle's equipment, button 1 may also be located in a different position in the center console. # Press button 1. # Select the Camera Views menu. # In the multimedia system, select the desired view (/ page 255). ¦Selecting a view for the 360° camera (reverse gear) # Engage reverse gear. # Select the desired view in the multimedia sys­tem (/ page 255). ¦360° camera with GPS – managing activation positions Multimedia system: 4 © 5 Settings 5 Assistance 5 Camera Renaming an activation position % You can determine activation positions on the Camera Views menu. (/ page 255) # Select u for the desired activation posi­tion. # Select Edit. # Enter a name and confirm. The activation position will be saved under the new name. # Select u for the desired activation posi­tion. # Select Delete Entry. # Confirm the prompt. The activation position will be deleted. ¦Opening the camera cover Multimedia system: 4 © 5 Settings 5 Assistance 5 Camera # Select Open Camera Cover. % The camera cover will close automatically after some time or after the vehicle is switched on or off. Parking Assist PARKTRONIC ¦Function of Parking Assist PARKTRONIC Parking Assist PARKTRONIC is an electronic park­ing assistance system that monitors the area sur­rounding your vehicle and uses visual and audible cues to show you the distance between the vehi­cle and a detected obstacle. The passive side impact protection also warns you of obstacles to the sides. These must be detected by the sensors in the front or rear bumper before you drive past them. If you steer in the direction of a detected obstacle and there is a risk of a lat­eral collision, a warning will be issued. The pas­sive side impact protection can be activated and deactivated via the multimedia system. In order for front or rear obstacles to the sides to be displayed, the vehicle must first travel a dis­tance of at least half a vehicle length. Once the vehicle has traveled one vehicle length, obstacles on all sides can be shown. Parking Assist PARKTRONIC is only an aid. It is not a substitute for paying attention to your sur­roundings. You are always responsible for safe maneuvering and parking. Make sure that there are no persons, animals or objects in the maneu­vering area while you are maneuvering and park­ing or exiting parking spaces. Displays on the central display Vehicles with 360° cameraVehicles with rear-view cameraAs soon as Parking Assist PARKTRONIC is opera­tional, the respective areas of the display will be shown in blue. 1 Operational, front and rear 2 Operational, all around 3 Operational, all around and obstacle detected The color of the display will change depending on the distance to the detected obstacle: R Blue: > 3.3 ft (1 m) (no obstacles detected) R Yellow: approx. 3.3 ft (1 m) - 2.2 ft (0.7 m) R Orange: approx. 2.2 ft (0.7 m) -1.2 ft (0.4 m) R Red: < 1.2 ft (0.4 m) Vehicles with 360° camera: the boundary line will shift dynamically depending on the positions and distances of the obstacles detected. Depending on the distance to the obstacle detec­ted, an intermittent warning tone will sound as well. You can set the timing of the warnings in the multimedia system. In the Warn Early setting, the system will warn you from a distance of 3.3 ft (1 m); in the standard setting, it will warn you only from 1.2 ft (0.4 m). Vehicles with 360° camera Vehicles with rear-view camera If you are not in the Camera & Parking menu and an obstacle in the vehicle path is detected, pop­up window 1 will appear on the central display if the following requirements are met: R Vehicles without Active Parking Assist: when you are driving at a speed no greater than 8 mph (12 km/h). R Vehicles with Active Parking Assist: when you are driving at a speed no greater than 11 mph (18 km/h). Optionally, obstacles detected by Parking Assist PARKTRONIC from a distance of approximately 3.3 ft (1.0 m) in front 2 and 2.2 ft (0.7 m) at the sides 3 can also be displayed on the head-up display. Vehicles with active ambient lighting and Parking Package with remote parking functions When Warning Support is activated, the Parking Assist PARKTRONIC display will also be accompa­nied by ambient lighting. If an obstacle is detec­ted, the ambient lighting will light up in the same color as the display on the central display. The ambient lighting that accompanies the Park­ing Assist PARKTRONIC display is intended merely to accentuate the display in the central display and does not replace it. More information on ambient lighting: (/ page 147) % A display message for the ambient lighting will not appear in the area of the driver's display or in the rear passenger compartment. % Depending on the selected setting, other functions may supersede the ambient lighting effects of Parking Assist PARKTRONIC. In this case, the ambient lighting effects of Parking Assist PARKTRONIC will not occur. System limits Parking Assist PARKTRONIC does not necessarily take into account the following obstacles: R Obstacles below the detection range, e.g. per­sons, animals or objects R Obstacles above the detection range, e.g. overhanging loads, overhangs or loading ramps of trucks R Pedestrians or animals approaching the vehi­cle from the side R Objects placed next to the vehicle Obstacles at the sides will not be shown in the fol­lowing situations, for example: R You park the vehicle and switch it off. R You open the doors. After the engine is restarted, the vehicle will need to detect obstacles again by driving past them before a new warning can be issued. Also observe the limits of the following systems: R Rear-view camera (/ page 254) R 360° camera (/ page 255) Observe the information on vehicle sensors and cameras; otherwise, the system will not be able to function properly (/ page 212). Problems with Parking Assist PARKTRONIC If the Parking Assist PARKTRONIC display lights up red for approximately three seconds then goes out, and the é symbol appears in the driver's display, the system may have been deactivated due to signal interference. Start the vehicle again and check whether Parking Assist PARKTRONIC is working at a different location. If a warning tone also sounds, it may be due to one of the following causes: R The sensors are dirty: clean the sensors and observe the notes on care of vehicle parts (/ page 348). R Parking Assist PARKTRONIC has been deacti­vated due to a malfunction: restart the vehi­cle. If the problem persists, consult a qualified specialist workshop. ¦Activating/deactivating Parking Assist PARKTRONIC * NOTE Risk of an accident from objects at close range Parking Assist PARKTRONIC may not detect certain objects at close range. # When parking or maneuvering the vehi­cle, pay particular attention to any objects which are above or below the sensors, e.g. flower pots or drawbars. The vehicle or other objects could other­wise be damaged. Requirements: R The camera menu is open. R Or: Active Parking Assist is active. R Or: the PARKTRONIC pop-up window appears. # Press = in the central display. If the indicator lamp is lit, Parking Assist PARKTRONIC is active. If the indicator lamp does not light up or the symbol é is displayed, PARKTRONIC Parking Assist is not active. % Parking Assist PARKTRONIC is automatically activated when the vehicle is started. Alternatively, Parking Assist PARKTRONIC can be activated or deactivated in the quick access menu. ¦Setting the warning tones of Parking Assist PARKTRONIC Multimedia system: 4 © 5 Settings 5 Assistance 5 Parking Adjusting warning tones # Select Set Warning Tones. # Set the desired level under Volume or Tone Pitch. Activating/deactivating audio fadeout # Select Audio Fadeout and activate or deacti­vate Audio Fade for Warnings. The volume of the current media source is reduced during a Parking Assist PARKTRONIC warning tone. or # Select Audio Fadeout and activate or deacti­vate Audio Fadeout When in R. The volume of the current media source is reduced when reverse gear is engaged. Setting the time of the warnings # Select Time of Warning # Activate or deactivate Side Warning. # Set the desired warning time for Front or Rear. Active Parking Assist ¦Function of Active Parking Assist Active Parking Assist is an electronic parking assistance system, which uses ultrasound with the assistance of the rear view camera and 360° camera. When you are driving forwards up to approximately 22 mph (35 km/h), the system automatically measures parking spaces on both sides of the vehicle. Active Parking Assist offers the following func­tions: Vehicles with rear view camera R Parking in parking spaces parallel to the road R Backing up into parking spaces perpendicular to the road Vehicles with 360° camera R Parking in parking spaces parallel to the road R Parking in parking spaces perpendicular to the road (optionally either forwards or reverse) R Parking in parking spaces that can only be detected as such due to markings (forexample at the roadside) R Exiting a parking space parallel to the road R Exiting a parking space perpendicular to the road (optionally either left or right) Active Parking Assist is only an aid. It is not a sub­stitute for your attention to the surroundings. The responsibility for safe maneuvering and parking remains with you. Make sure that no persons, ani­mals or objects etc. are in the maneuvering range. If Active Parking Assist is available, the Çmes­sage appears in the driver's display. When the system detects parking spaces, È appears. The arrows show on which side of the road free parking spaces are located. These are then shown in the central display. When Active Parking Assist is activated, the turn signal indicators are activated based on the calcu­lated path of your vehicle. When you are entering or exiting a parking space, the procedure is assis­ted by acceleration, braking, steering and gear changes. To start the parking procedure, press the c button (/ page 266). Active Parking Assist will be canceled in the fol­lowing situations: R You deactivate Parking Assist PARKTRONIC. R You press the c button again. R You begin steering. R You engage transmission position j. R ESP® intervenes. R You open the driver's door. System limits If the exterior lighting is malfunctioning, Active Parking Assist is not available. Also observe the system limits of the following systems: R Rear view camera (/ page 254) R 360° camera (/ page 255) Objects that are above or below the detection range of Active Parking Assist, e.g. protruding loads, overhangs or loading ramps of trucks or boundaries of parking spaces, are not detected when measuring the parking space. These are also then not taken into account when calculating the parking procedure. In some circumstances, Active Parking Assist may therefore guide you into the parking space prematurely or brake too late. Certain environmental conditions, suchas snowfall or heavy rain, may lead to a parking space being measured inaccurately. Parking spaces that are partially occupied by trailer drawbars might not be identified as such or be measured incorrectly. Only use Active Parking Assist on level, high-grip ground. & WARNING Risk of accident due to objects located above or below the detection range of Active Parking Assist If there are objects above or below the detec­tion range, the following situations may arise: R Active Parking Assist may steer too early. R The vehicle may not stop in front of these objects. There is a danger of collision! # In these situations, do not use Active Parking Assist. Active Parking Assist can also display unsuitable parking spaces, e.g. parking spaces in which parking is not permitted or parking spaces on unsuitable surfaces. Do not use Active Parking Assist in the following situations: R In extreme weather conditions suchas ice, packed snow or in heavy rain. R When transporting a load that protrudes beyond the vehicle. R If the parking space is on a steep downhill or uphill gradient. R When snow chains are installed. R Directly after a tire change or when spare tires are installed. R If the tire pressure is too low or too high. R If the suspension is out of alignment, e.g. after bottoming out on a curb. R On steep inclines of more than approximately 15%. ¦Parking with Active Parking Assist %Depending on the vehicle's equipment, button1 may also be located in a different positionin the center console.#Press button 1.# Select Parking Assistance menu 2. Parking spaces 3 detected by the system will be shown on the central display. When the vehicle is stationary, indicated vehicle path 4 into currently selected parking space 5 will also appear. # If a parking space is displayed: stop the vehi­cle. # If necessary, select another parking space. # Vehicles with 360° camera: to change the parking direction, tap the selected parking space again. # To start the parking procedure: press button 1 again. The vehicle will drive into the selected parking space. The turn signal indicator is switched on automati­cally when the parking procedure begins. You are responsible for selecting the turn signal indicator in accordance with the traffic conditions. If neces­sary, select the turn signal indicator accordingly. & WARNING Risk of accident due to vehicle swinging out while parking or pulling out of a parking space While parking or exiting a parking space, the vehicle swings out and can drive onto areas of the oncoming lane. This could cause you to collide with objects or other road users. # Pay attention to objects and other road users. # Where necessary, stop the vehicle or cancel the parking procedure with Active Parking Assist. On completion of the parking procedure, the Active Parking Assist Finished message will appear. # Secure the vehicle against rolling away. When legal requirements or local conditions necessi­tate it: turn the wheels towards the curb. % You can stop the vehicle and change the transmission position during the parking pro­cedure. The system will then calculate a new vehicle path. If no new vehicle path is availa­ble, the transmission position can be changed again, or the process can be canceled. Immediate parking via the Camera Views menu # Select the Camera Views menu. # If the vehicle is stationary and in transmission position k and symbol 6 appears in the camera image: press button 1 again. The parking procedure will be initiated for the detected parking space. % The parking space and parking direction can­not be changed in immediate parking. ¦Exiting a parking space with Active Parking Assist Requirements R The vehicle is equipped with 360° camera. R The vehicle has been parked with Active Park­ing Assist. # Start the vehicle. # Press button 1. # Select Parking Assistance menu 2. # If necessary, change direction of exit 3. # To start exiting the parking space: press but­ton 1 again. # If necessary, change the transmission posi­ tion. Observe any messages displayed on the driver's display and central display. The vehicle will move out of the parking space. The turn signal indicator is automatically switched on when exiting a parking space begins and switched off when it is completed. You are responsible for selecting the turn signal indicator in accordance with the traffic conditions. If neces­sary, select the turn signal indicator accordingly. After the vehicle has finished exiting the parking space, a warning tone and the message Ø Active Parking Assist Finished: Take Control of Vehicle will prompt you to take control of the vehicle. You will have to accelerate, brake, steer and change gear yourself again. If you do not react to the prompt to take control of the vehicle, the system will brake the vehicle to a standstill. ¦Pausing Active Parking Assist You can interrupt the parking or exiting procedure of Active Parking Assist by performing one of the following actions, for example: # Depressing the brake pedal. # Opening the front passenger door, a rear door or the cargo compartment. # Applying the electric parking brake or activat­ing the HOLD function. # To resume the parking or exiting procedure: gently depress the accelerator pedal. % If the electric parking brake was applied before Active Parking Assist was activated, depress the accelerator pedal lightly to start the parking or exiting procedure. Check the area around your vehicle again before resuming a paused parking procedure. Check once more to ensure that there are no persons, animals or objects in the vehicle's path. Also observe the system limitations of Active Parking Assist. ¦Automatic braking function of Active Parking Assist Persons or objects detected in the maneuvering range could cause the vehicle to brake sharply and interrupt the parking or exiting procedure. The vehicle will then be held at a standstill. If you depress the accelerator pedal, the parking or exit­ing procedure is resumed. Check the area around your vehicle again before resuming the parking or exiting procedure. Make sure that persons, animals or objects are no lon­ger in the maneuvering range. Also observe the system limitations of Active Parking Assist. Remote Parking Assist ¦Function of Remote Parking Assist % Remote Parking Assist is an additional func­tion of Active Parking Assist. Comply with local traffic laws and regulations when using Remote Parking Assist on public roads. If it is a requirement that you turn the wheels toward the curb, you must not use Remote Parking Assist. Please note that you may only use Remote Parking Assist if you have a valid driving license and are in a fit state to drive. Remote Parking Assist parks your vehicle or exits the parking space while you are outside of your vehicle. You can monitor the maneuvering and parking procedure on your mobile phone. With Remote Parking Assist, you can carry out all the parking procedures of Active Parking Assist. You can also position the vehicle directly in front of a garage or a driveway entrance and then use Remote Parking Assist to enter or exit a parking space. Remote Parking Assist manages pulling away, braking and steering. While Remote Parking Assist is active, the vehicle is locked. Remote Parking Assist is only an aid. It is not a substitute for your attention to the surroundings. The responsibility for safe maneuvering and park­ing always rests with you. Interrupt or terminate the parking procedure if necessary. Make sure that no persons, animals or objects etc. are in the vehicle's path. Make sure to also pay attention to other vehicles. System limits If the system detects a malfunction or a system limit during the maneuvering or parking proce­dure, the procedure will be canceled: R The vehicle is brought to a standstill. R Transmission position j is selected and the electric parking brake is applied automatically. R The vehicle is switched off. R The vehicle remains locked. If the parking maneuver is canceled, a corre­sponding message is displayed on the mobile phone. Depending on the situation, you can then take control of the procedure, maneuver the vehicle back to the starting position or manually take con­trol of the vehicle. The system limits of Active Parking Assist apply (/ page 264). Certain environmental conditions, such as snow­fall or heavy rain, may lead to a parking space being measured inaccurately or to connection problems with the mobile phone. Only use Remote Parking Assist on level, high-grip ground. During the parking procedure, you should not stand more than approx. 10 ft (3.0 m) away from the vehicle. At greater distances, the procedure will be interrupted and a corresponding message will be displayed on the mobile phone. If you move closer to the vehicle, you will be able to continue the procedure. ¦Operating Remote Parking Assist Requirements For the Remote Parking Assist function, you require a mobile phone and the current Remote Parking Assist app for your vehicle type. % A list of compatible phones can be found at: https://www.mercedes-benz-mobile.com/ The following operating systems are supported: R Android™ R Apple® iOS & WARNING Danger due to insufficient view of the vehicle surroundings If you maneuver, park or exit a parking space with the vehicle using Remote Parking Assist, observe the following: # Make sure that you have the best view possible of the vehicle and the vehicle's surroundings. # Make sure that no persons, animals or objects are in the path of your vehicle. # Make sure that you maintain a suitable distance to the vehicle and that neither you nor other road users could be endangered. # Be aware of the vehicle's surroundings at all times and identify possible dangers. # If necessary, cancel the parking proce­dure. No persons or pets are permitted to remain in the vehicle during the parking procedure. Observe the system limits at all times. If necessary, cancel the parking procedure. Always make sure that others can access their vehicles. # Activate the "Remote Parking Assist" service e.g. via the Mercedes me homepage. # Authorize the mobile phone with the Remote Parking Assist app in the vehicle (/ page 272). Selecting the parking maneuver in advance while inside the vehicle # Stop the vehicle and select transmission posi­tion j. %Depending on the vehicle's equipment, button1 may also be located in a different positionin the center console.#Press button 1.# Select Parking Assistance menu 2. # For further information on Remote Parking Assist: select 3. # If necessary, select another parking space 4 or select 5 to drive straight ahead into a garage, for example. # If necessary, change parking direction 6. % Alternatively, you can begin parking with Active Parking Assist (/ page 266) and con­ tinue with the Remote Parking Assist from any vehicle position. To do this, stop the parking process and select transmission position j. # Switch off the vehicle and get out, taking the SmartKey with you. Starting the parking procedure without selecting in advance # Stop the vehicle and select transmission posi­tion j. # Switch off the vehicle and get out, taking the SmartKey with you. Starting the parking procedure while outside the vehicle # Unlock the vehicle. % Keep the vehicle SmartKey with you during the parking procedure. You can cancel the parking procedure and bring the vehicle to a standstill by pressing a button on the Smart-Key. % On completion of the parking procedure, the vehicle is locked. If you have started the parking procedure as described above, the vehicle is ready to connect to your mobile phone for a limited time. # Start the Remote Parking Assist app on your mobile phone and connect to the vehicle. # Follow the instructions of the Remote Parking Assist app. % The turn signal indicator is automatically switched on when starting parking and switched off when it is completed. % If the connection between the vehicle and the mobile phone is interrupted while a parking maneuver is being performed, the maneuver can be continued if the connection is re­ established within a short time. & WARNING Risk of accident due to vehicle swinging out while parking or pulling out of a parking space While parking or pulling out of a parking space, the vehicle swings out and can drive onto areas of the oncoming lane. This could cause you to collide with objects or other road users. # Pay attention to objects and other road users. # Where necessary, stop the vehicle or cancel the parking procedure with Remote Parking Assist. # After ending the parking procedure, ensure that all vehicle doors, windows and the trunk are closed. Secure the vehicle against rolling away. Canceling the parking procedure You can cancel the parking procedure of Remote Parking Assist at any time and bring the vehicle to a standstill. # Cancel the parking procedure in the Remote Parking Assist app. or # Press a button on the vehicle SmartKey. or # Pull a door handle. ¦Authorizing/de-authorizing a mobile phone for Remote Parking Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Parking Authorizing a new mobile phone To use the Remote Parking Assist function, you must authorize your mobile phone. You can authorize up to ten mobile phones. # Select Remote Parking Assist. # Select Authorize a New Device. Remote Parking Assist will be ready to con­nect. # Start the Remote Parking Assist App and addi­tionally start the authorization process. A connection prompt will be displayed. # Scan the QR code on the central display. The mobile phone will be authorized. De-authorizing mobile phones # Select Remote Parking Assist. # Select Deauthorize Devices. # To de-authorize a mobile phone: select a mobile phone. The mobile phone will be deleted from the device list. # To de-authorize all mobile phones: selectDeauthorize All Devices. All mobile phones will be deleted from the device list. Maneuvering assistance ¦Function of Drive Away Assist Drive Away Assist can reduce the severity of an impact when pulling away. If the system detects an obstacle in the direction of travel, the vehicle's speed is briefly reduced to approximately 1 mph (2 km/h). A risk of collision may occur in the following situa­tions, forexample: R If the driver mixes up the accelerator and brake pedals. R If the driver engages an incorrect gear. R If the driver depresses the accelerator pedal with too much force. Drive Away Assist is active under the following conditions: R If the vehicle was stationary and the transmis­sion position was changed to k or h. R If the vehicle has rolled less than approx­imately 3.3 ft (1.0 m) since being at a stand­still. R If the detected obstacle is less than approx. 3.3 ft (1.0 m) away. The Drive-away Assist can be deactivated or acti­vated in the Maneuvering Assistance menu (/ page 276). If a critical situation is detected, the following symbol appears in red in the selected view in the Camera & Parkingmenu: % If Drive Away Assist is not available, the same symbol appears in gray. If the Camera & Park­ing menu is not opened on the central display, the symbol and pop-up of Parking Assist PARKTRONIC both appear. Drive Away Assist is only an aid. It is not a substi­tute for your attention to the surroundings. The responsibility for safe maneuvering and parking always rests with you. Make sure that no persons, animals or objects etc. are in the vehicle's path. & WARNING Risk of accident caused by limi­ted detection performance of Drive Away Assist Drive Away Assist cannot always clearly iden­tify objects and traffic situations. # Always pay careful attention to the traffic situation; do not rely on Drive Away Assist alone. # Be prepared to brake or swerve as nec­essary, provided the traffic situation per­mits and that it is safe to take evasive action. System limits The system limits of Active Parking Assist apply (/ page 264). On uphill gradients, the performance of Drive Away Assist is restricted. ¦Function of cross traffic warning The cross traffic warning can warn you of crossing traffic when you are exiting a parking space. The radar sensors in the bumper also monitor the area adjacent to the vehicle. The cross traffic warning is active under the fol­lowing conditions: R Warning for Cross Traffic, Rear: the vehicle is driving in reverse at a speed slower than approx. 6 mph (10 km/h). R Warning for Cross Traffic, Front: the vehicle is driving forwards at a speed slower than approx. 6 mph (10 km/h) and the camera image is shown on the central display (/ page 259). The Warning for Cross Traffic, Front can be deac­tivated or activated in the Maneuvering Assis­tance menu (/ page 276). If a critical situation is detected, the following symbol appears in red in the selected view in the Camera & Parkingmenu: Warning for Cross Traffic, Rear R The vehicle can be braked automatically when crossing traffic is detected. R If the menu Camera & Parking is not open and a critical situation is detected, a warning appears on the central display together with the PARKTRONIC Parking Assist pop-up. Warning for Cross Traffic, Front R If Active Parking Assist is active, the vehicle can be braked automatically when crossing traffic is detected. R If Active Parking Assist is not active but the menu Camera & Parking is open, a warning appears. R If the menu Camera & Parking is not open, the system cannot react to crossing traffic. The cross traffic warning is only an aid and not a substitute for your attention to the surroundings. The responsibility for safe maneuvering and park­ing always rests with you. Make sure that no per­sons, animals or objects etc. are in the vehicle's path. & WARNING Risk of accident caused by limi­ted detection performance of the cross traffic warning The cross traffic warning cannot always clearly identify objects and traffic situations. # Always pay careful attention to the traffic situation; do not rely on the cross traffic warning alone. # Be prepared to brake or swerve as nec­essary, provided the traffic situation per­mits and that it is safe to take evasive action. System limits % If the cross traffic warning is not available, the L symbol appears in gray. The system limits of Active Parking Assist apply (/ page 264). If the radar sensors are obstructed by vehicles or other objects, detection is not possible. In the following situations, the cross traffic warn­ ing is not available: R On inclines ¦Maneuvering brake function The maneuvering brake function can prevent colli­sions with pedestrians when the vehicle is back­ing up at slow speeds. If the rear view camera detects a person in the vehicle path, the vehicle can be braked to a standstill. The maneuvering brake function can intervene under the following conditions: R The vehicle is backing up at a speed slower than 6 mph (10 km/h). R The camera image is shown in the central dis­play (/ page 259). Depending on the country, you can activate and deactivate the maneuvering brake function in the Maneuvering Assistance menu (/ page 276). If the maneuvering brake function is triggered, the following symbol appears in red in the selected view in the Camera & Parkingmenu: % If the maneuvering brake function is not avail­ able, the same symbol appears in gray. The maneuvering brake function is only an aid. It is not a substitute for your attention to the sur­roundings. The responsibility for safe maneuvering and parking remains with you. Make sure that no persons, animals or objects etc. are in the maneu­vering range. & WARNING Risk of accident caused by limi­ted detection by the maneuvering brake function The maneuvering brake function cannot always clearly detect people. Other obstacles are not detected by the function. In these cases, the function may brake unnec­essarily or not brake at all. # Always pay careful attention to the traffic situation; do not rely on the maneuvering brake function alone. # Be ready to brake. System limits Observe the system limits of the following func­tions: R Active Parking Assist (/ page 264) R 360° camera (/ page 255) R Rear view camera (/ page 254) The maneuvering brake function is not available in the following situations: R on inclines ¦Activating/deactivating the maneuvering assis­ tant Multimedia system: 4 © 5 Settings 5 Assistance 5 Parking % This function is available on demand (/ page 27). # Select Maneuvering Assistance. # Activate or deactivate the desired maneuver­ing assistant. Memory Parking Assist ¦Function of Memory Parking Assist Memory Parking Assist can park your vehicle using a previously stored parking space. You can store parking procedures with a total distance of up to 550 yds (500 m) (110 yds (100 m) per park­ing or exiting procedure). During parking or exiting, the system can travel a previously stored path of up to approximately 110 yds (100 m) to or out of the desired parking space, for example, from the driveway entrance into the garage. Within a radius of approx. 165 yds (150 m), only one parking or exiting procedure can be recorded. Only use Memory Parking Assist on private prop­erty. Use on public roads, e. g. in public parking spaces, is not permitted. Memory Parking Assist is only an aid. It is not a substitute for your attention to the surroundings. The responsibility for safe maneuvering and park­ing remains with you. Make sure that no persons, animals or objects etc. are in the maneuvering range. System limits Observe the system limitations of Active Parking Assist (/ page 264). & WARNING Risk of accident due to objects located above or below the detection range of Memory Parking Assist If there are objects above or below the detec­tion range, the following situations may arise: R Memory Parking Assist may steer too early. R The vehicle may not stop in front of these objects. This result in a collision. # In these situations, do not use Memory Parking Assist. Objects located above or below the detection range of Memory Parking Assist may not be detected during the parking procedure. Drawbars of parked trailers, among other objects, that protrude into the parking space may not be detected. Do not use Memory Parking Assist in the following situations, for example: R in extreme weather conditions suchas ice, packed snow or in heavy rain. R when transporting a load that protrudes beyond the vehicle. R if the parking space is on a steep downhill or uphill gradient. R when snow chains are installed. ¦Recording a parking procedure using Memory Parking Assist Requirements R The entire route is, for example, within the bounds of your own property and not on pub­lic roads. R The system needs reference points in the sur­roundings to orient itself, such as fences, walls or trees. Therefore, after you start the vehicle, you must drive for a certain distance first. No new route can be recorded unless enough reference points have been detected in the surrounding area. # Press button 1. The Camera & Parking view will open on the central display. # Select menu 2 Memory Parking Assist. # Brake the vehicle to a standstill at the desired starting point of the assisted parking proce­dure, e.g. a driveway entrance. # To start recording: press 3. % If not all conditions for a recording are met, symbol 3 will be greyed out. # To end recording: stop the vehicle and press 3 again. The recording will be stored. % You can delete and rename stored parking procedures in the Memory Parking Assist set­tings. ¦Parking with Memory Parking Assist Requirements R A parking procedure has been recorded. # Press button 1. The Camera & Parking view will open on the central display. # Select Memory Parking Assist menu 2. # Brake the vehicle to a standstill at the starting point of the stored parking procedure. # To start the parking procedure: press 6. # Select the stored parking procedure from the list. # Follow the instructions on the central display. The vehicle will drive into the selected parking space. % The turn signal indicator will not be switched on automatically. You are responsible for engaging the turn signal indicator in accord­ance with the traffic conditions. # Once the parking procedure is complete, safe­guard the vehicle against rolling away. ¦Exiting a parking space with Memory Parking Assist Requirements R The unparking procedure was recorded together with the respective parking proce­dure and stored separately within one driving cycle. R The vehicle was parked using Memory Parking Assist. # Press button 1. The Camera & Parking view will open on the central display. # Select Memory Parking Assist menu 2. Starting the unparking procedure # Press 6. # Confirm the saved unparking procedure. # Follow the instructions on the central display. The vehicle will drive the recorded route. % The turn signal indicator will not be switched on automatically. You are responsible for engaging the turn signal indicator in accord­ance with the traffic conditions. # Take control of the vehicle once the unparking procedure is complete. ¦Setting Memory Parking Assist Multimedia system: 4 © 5 Settings 5 Assistance 5 Parking 5 Memory Parking Assist Renaming a recording # Select Manage Lanes. # Select u next to the desired recording. # Enter a name and confirm with OK. Deleting a recording # Select Manage Lanes. # Select u next to the desired recording. # Select Delete Entry. Deleting all recordings # Select Manage Lanes. # Select u next to one of the desired record­ ings. # Select Delete All. % Alternatively, you can delete all data in Mem­ory Parking Assist by resetting the multimedia system (/ page 307). The vehicle is not suitable for use of tow bar sys­tems used for flat towing or dinghy towing, for example. Attaching and using tow bar systems can result in damage to the vehicle. When you are towing a vehicle with tow bar systems, safe driving characteristics cannot be guaranteed for the tow­ing vehicle or the towed vehicle. The vehicle-trailer combination may swerve from side to side. Observe the following information: R Permitted towing methods (/ page 361) R Notes on towing with both axles on the ground (/ page 362) If the driver display has failed or is malfunc­tioning, function restrictions in systems rele­vant to safety cannot be detected. The operating safety of your vehicle may be impaired. # Drive on carefully. # Have the vehicle checked immediately at a qualified specialist workshop. * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. If the operating safety of your vehicle is impaired, park the vehicle immediately and safely. Contact a qualified specialist workshop. The driver's display shows the following basic information: R Speed and power meter level R Range according to average consumption, per­sonal driving style or high-consumption driving style R Condition of charge of the high-voltage battery R Indicator and warning lamps Additional functions available include the follow­ing: R Different menus, e.g. for assistance and navi­gation R Status displays for the driving systems R Display messages Some menu content and settings can be custom­ized. The range in general R All ranges shown are assumptions based on various calculation bases. The actual range achieved may differ from the range displayed. R Outside temperatures, climate control set­tings, vehicle interior temperatures, road con­ditions, driving style etc. directly influence the achievable range. R Pay attention to the charging prompts at all times. Range according to personal driving style R Your previous personal consumption will be taken into account when the range is being calculated. R While the navigation system or commuter route is active, additional information about the route ahead can be included in the range calculation. Range with low consumption R The maximum range shows the potential range when consumption is low, e.g. as a result of economical driving or having the air condition­ing system turned off. Range with high consumption R The minimum range shows the range when consumption is high, e.g. as a result of a sporty driving style or having the air condition­ing system turned on. R This range is determined based on past and current consumption figures. Electric energy consumption R The From Start and From Reset consumption figures take into account all active consumer equipment when it comes to the drive sys-tem's operational readiness õ. % If the range maximization function is switched on, the range on the speedometer may increase depending on the potential range (/ page 183). & WARNING Risk of distraction from infor­mation systems and communications equipment If you operate information systems and com­munication devices integrated in the vehicle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. # Only operate this equipment when the traffic situation permits. # If you cannot be sure of this, stop the vehicle whilst paying attention to road and traffic conditions and operate the equipment with the vehicle stationary. Observe the legal requirements for the country in which you are currently driving when operating the driver's display. Scrolling on the menu bar 1 Back button 2 Main menu button 3 Touch Control The content on the driver's display is controlled using the control elements on the left side of the steering wheel. You can use Touch Control 3 to navigate vertically and horizontally by swiping with % To operate Touch Control 3 in the most effective way, use the tip of your thumb if pos­sible. You can also set the sensitivity of the Touch Control on the central display . # Briefly press main menu button 2. # Select a menu by swiping to the left or right on Touch Control 3. # To confirm: press Touch Control 3. Notes on menus on the driver's display & WARNING Risk of distraction from infor­mation systems and communications equipment If you operate information systems and com­munication devices integrated in the vehicle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. # Only operate this equipment when the traffic situation permits. # If you cannot be sure of this, stop the vehicle whilst paying attention to road and traffic conditions and operate the equipment with the vehicle stationary. Observe the legal requirements for the country in which you are currently driving when operating the driver's display. The following menus can be called up via the menu bar on the driver's display: R Understated R Sport R Classic R Navigation R Assistance R Service On some of these menus, you can choose between different display content on the center display area. On most of the menus, you can use Options to configure further settings for the menu-specific display content. You can find further information about the possi­ble settings and selections on the menus in the Digital Operator's Manual. Function of the head-up display The head-up display projects various content into the driver's field of vision, for example. You can use the head-up display menu bar to select different contexts, e.g.: R Minimal R Sport R Standard R ECO display R Settings R Head-up display on/off The following image shows an example of the head-up display. You can choose what content is displayed (/ page 283). Head-up display content with navigation (9x3°) 1 Navigation instructions 2 Navigation instructions (distance to the next route event) 3 Steer Assist status 4 Current speed 5 Set speed in the driving system (e.g. cruise control) 6 Detected traffic signs (Traffic Sign Assist) When you receive a call, the 6 Call Waiting message will appear on the head-up display and the driver's display. System limits Visibility is particularly influenced by the following conditions: R Seat position R Image position setting R Ambient light R Wet road surfaces R Objects on the display cover R Polarization in sunglasses Operating the head-up display Selecting display content of the head-up display via the menu bar of the driver's display # Press the ò main menu button on the left. # To select the menu bar of the head-up dis­play: swipe upwards on the left-hand Touch Control. Switching between display content on the head-up display # Swipe to the left or right on the left-hand Touch Control. A preview of the selected display content will appear on the head-up display. # To confirm: press the a button. Switching back to the driver's display # Press the G or ò button. # Swipe to the left or right on the left-hand Touch Control and select Settings on the menu bar of the head-up display. # Press the left-hand Touch Control. The current position and brightness settings will be displayed as graphics on the head-up display as well as on the driver's display. # To adjust the position: swipe upwards or downwards on the left-hand Touch Control. # To adjust the brightness: swipe to the left or right on the left-hand Touch Control. The settings configured for position and brightness will be saved automatically. # Press the G or a button to exit the set­tings. Switching the head-up display on/off Driver's display: 4 © Switching on # Swipe upwards on the left-hand Touch Con­trol. # Press a on the left-hand Touch Control. Switching off # Swipe upwards on the left-hand Touch Con­trol. # Swipe on the left-hand Touch Control and select Head-up Display. # Press a on the left-hand Touch Control. The status displays for the driving and driving safety systems can be found in display sections 1 to 4. % The number, positions and presentation of the status indicators on the driver's display depend on which systems are activated or deactivated. Y Pedestrian detection (only on assistant dis­play) Ç Active Parking Assist is available (/ page 266) È Active Parking Assist has recognized a parking space (/ page 266) é Parking Assist PARKTRONIC deactivated (/ page 263) h Cruise control (/ page 221) ç Active Distance Assist DISTRONIC (/ page 223) Ò Specified distance for Active Distance Assist DISTRONIC (/ page 223) æ Active Brake Assist switched off (/ page 241) Ä Active Brake Assist impaired or not func­tioning (/ page 241) Ø Active Steering Assist (/ page 230) ± Active Lane Change Assist (/ page 234) ð Active Lane Keeping Assist (/ page 251) Z Active Blind Spot Assist (only on assistant display) (/ page 249) ° Haptic accelerator pedal (/ page 181, 183) ë HOLD function (/ page 216) _ Adaptive Highbeam Assist (/ page 143) Adaptive Highbeam Assist Plus (/ page 145) ¬ Active Stop-and-Go Assist (/ page 230) ÒSlippery road surface warning Vehicles with Traffic Sign Assist: Detected instruc­tions and traffic signs (/ page 241) Notes on the MBUX multimedia system & WARNING Risk of distraction from infor­mation systems and communications equipment If you operate information systems and com­munication devices integrated in the vehicle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. # Only operate this equipment when the traffic situation permits. # If you cannot be sure of this, stop the vehicle whilst paying attention to road and traffic conditions and operate the equipment with the vehicle stationary. You must observe the legal requirements for the country in which you are currently driving when operating the multimedia system. Depending on the equipment, the scope of func­tion and product designation of your MBUX multi­media system may differ from the description and images in this Operator's Manual. For example, route guidance with augmented reality is not avail­able in all equipment variants. * NOTE Increased surface temperature due to direct sunlight on the central display/ front passenger display The surface of the display is very dark. If the display is exposed to direct sunlight, the surface may heat up considerably. # If the display has been exposed to direct sunlight, allow it to cool down before touching it for a longer period of time. Overview of the MBUX multimedia system Vehicles with central display 1 Touch Control and control panel for the MBUX multimedia system MBUX stands for Mercedes-Benz User Experi­ ence. • Operating Touch Control 2 Central display with touch functionality • Home screen overview • Operating the touchscreen 3 Switch panel with: ú Fingerprint sensor Ü Switches the MBUX multimedia system on or off a Switches sound on or off ø Adjusts the volume Vehicles with MBUX Hyperscreen 1 Touch Control and control panel for the MBUX multimedia system • Operating Touch Control 2 Central display with touch functionality for the driver • Home screen overview • Operating the touchscreen 3 Front passenger display with touch functional­ity • Home screen overview • Operating the touchscreen 4 Switch panel with: ú Fingerprint sensor Ü Switches the MBUX multimedia system on or off a Switches sound on or off ø Adjusts the volume Further operating options: R Conducting a dialog with the MBUX voice assistant. % You can find further information about opera­tion as well as about applications and serv­ices in the Digital Operator's Manual. Front passenger display (only vehicles with MBUX Hyperscreen) & WARNING Risk of accident and injury due to distraction when the driver is looking at the front passenger display If you look at the front passenger display while driving, you may be distracted from the traffic. This could also cause you to lose control of the vehicle. The front passenger display is intended exclusively for the front passenger. # Keep the actual traffic situation con­stantly in view. # Avoid looking at the front passenger dis­play while driving. The front passenger display is an additional touchscreen specifically for the front passenger. Requirements for displaying content on the front passenger display while driving: R The passenger is sitting on the passenger seat. R The driver camera is switched on (/ page 299). In the status line of the central display is shown as a è white symbol. R The driver camera detects the driver's head and line of sight. It displays content from the MBUX multimedia system independently of the central display. Depending on the application, operation is inde­pendent of the driver. Depending on the market, extended content, e.g. playback of media content, is also available while driving. For the playback of certain content on the front passenger display, e.g. moving images, the pairing of Bluetooth® headphones is necessary. If the driver keeps their eyes on the front passenger display for too long, content, e.g. mov­ing images, will be hidden. An intelligent, camera-based blocking concept is used for this purpose. % When the vehicle is parked, the front passenger can use the front passenger dis­ play under the following conditions: R The passenger is sitting on the passenger seat. R There is interaction with the MBUX multi­media system. If the driver has left the vehicle briefly, e.g. to go shopping, the front passenger display can also be operated. % If no front passenger is present, a digital dec­orative image can be shown on the front passenger display. Anti-theft protection This device is equipped with technical provisions to protect it against theft. Further information on anti-theft protection can be obtained at an author­ized Mercedes-Benz Center. Zero layer ¦Function of the zero layer The zero layer provides you with dynamic content from the MBUX multimedia system and is used to quickly access and control the applications you use. When you select © on the central display, the digital map with the applications appears in the lower display area. Compared to the home screen with a classic menu, the steps required to call up the applications are reduced. You can switch between the zero layer and the home screen with a classic menu. The applications can be hidden from the display area and shown again. The zero layer provides the following modules and applications: R EQ module and navigation module The EQ module is always shown on the digital map. In the expanded view, charging settings and navigation functions are offered. R Entertainment (media, radio) and telephone When the lower display area is shown, the entertainment sources are always displayed. A mobile phone must be connected to the MBUX multimedia system for the phone to be displayed. R Active applications The lower display area shows an active mas­sage program, for example. R Suggestions Suggestions are displayed on the lower display area based on context and your user behavior. These can be dialed phone numbers, active massage programs or vehicle functions, for example. R Online voice applications In the lower display area, context-dependent services that can be executed via voice are available for direct access. The applications are first displayed in a reduced view. By tapping on them, you can operate them or open the associated menu (expanded view). A long press on a suggestion opens a context menu in which further functions are available. The learning function can be switched on and off for the options (/ page 300). ¦Overview zero layer Digital map and user-specific applications (exam­ple) 1 EQ module (reduced view) 2 Enters a destination 3 Calls up the Control Center 4 Calls up user profile settings 5 Content sharing menu 6 Status line 7 Suggestions Requirement: suggestions are activated (/ page 300). 8 Active application, e.g. massage program 9© Press briefly: displays all applications and the global search (/ page 291) Press and hold: calls up the home screen with classic menu A Entertainment sources (media, radio) and telephone Requirement for phone: the mobile phone is connected to the MBUX multimedia system. The zero layer shows the digital map and the user- specific applications. The following user-specific applications are dis­played in the lower display area: R Suggestions 7 R Active applications 8 R Entertainment sources and telephone A R Online voice applications The lower display area can be hidden and shown (/ page 291). Information about entertainment sources You can operate the applications in the reduced view or in the menu (expanded view) (/ page 291). Examples: R Control a media source, e.g. pause/play, next track, set a station R Select tracks from the current playlist or sta­tions from the station list R Select a media source The media source must be connected to the MBUX multimedia system. Information about the telephone To use the functions, your mobile phone must be connected with the MBUX multimedia system. Requirement for suggestions: the Calls & Mes­sages option is activated in the suggestions. Examples: R Answer a call and call a missed call The missed calls are displayed for the mobile phone currently connected to the MBUX multi­media system. R Display contacts and call list and call a con­tact R Use voice functions R Suggest contacts The contacts are suggested for the mobile phone connected to the MBUX multimedia system. No contacts are suggested for a mobile phone that is linked to another user profile. R Write messages to contacts (suggestion) R Connect a device via the device manager (sug­gestion) Information about active applications The following functions are available: R Operating the massage program R Operating an ENERGIZING COMFORT program R Raising or lowering the vehicle level Suggestions for comfort and vehicle functions as well as navigation Requirement: the Comfort, Vehicle and Naviga­tion options are activated in the suggestions. R Operating the massage program For example, the multimedia system suggests a program at a certain time. R Operating an ENERGIZING COMFORT program R Opening the tailgate Requirement: the vehicle is equipped with trunk lid convenience closing. R Opening and closing the convenience doors Requirement: the vehicle is equipped with comfort doors. R Setting the vehicle level R Making heating settings R Activating/deactivating Parking Assist PARKTRONIC R Selecting previous destinations and destina­tions from favorites Information on online voice applications Requirement: the Online Voice Services option is activated in the suggestions. The suggested voice applications are made availa­ ble online and are based on your previous voice inputs. Examples: R What will the weather be like tomorrow? R Play the messages. R Start geoquiz. R Open the garage door. ¦Calling up and operating the zero layer Calling up the zero layer When the vehicle has been switched on, the zero layer is displayed with the digital map. Navigation is active. # From another application: press the © but­ton on the right side of the steering wheel. or # Tap on ©. Operating applications in the reduced view (exam­ples) # Media: to play the previous or next track, tap ûor ü. # To answer a call or call a missed call: tap on # Press the © button on the steering wheel the contact. on the right. After the connection has been established, EQ module (expanded view) the call functions are available. # To end a call: tap on the contact again. # To reply to message: tap on a message and dictate the message via the MBUX voice assis­tant. # To start a massage program: tap on the appli­cation and start the massage program. # To select a previous destination: tap on the application and select one of the previous destinations. # To select a destination from the favorites: tap on the application and select the destination. Hiding and showing the display area with applica­ tions # To hide: pull the applications down. # To show: pull the bar above © upwards. or # Select ©. or 1Sets the charging program (/ page 203)2Current condition of charge of the high-volt-age battery3Maximum condition of charge (depending onthe setting)4 Sets the next charging break (to use a less expensive tariff) 5 Sets the departure time 6 Opens the socket flap 7 Activates or deactivates ECO charging # Tap on the EQ module (/ page 289). The charging settings are displayed. Additional EQ and navigation functions are available in the lower menu bar: R Symbol ª Enters a destination R Route The route shows charging stops and the destination. R Range Switches range maximization on or off (/ page 183). R Consumption The current and average fuel consumption will be displayed. R Symbol Z Makes settings for View, Messages & Acoustic Signals and Route. # To close the menu: select G. Navigation module (expanded view) Example: navigation module with active routeguidance1Arrival time at charging stop, type of chargingstation2 Charging stop shows the charging time rec­ommended by the navigation with Electric Intelligence as well as states of charge on arrival and onward journey for an optimal travel time 3 Distance from current vehicle position and remaining driving time 4 Searches for an additional charging station # Tap on the EQ module (/ page 289). # Select Route in the lower menu bar. Operating a menu in the lower display area (exam­ple: active massage program) 1 Selects a massage program 2 Starts/stops a massage program for the driver 3 Starts/stops a massage program for the front passenger 4 Sets the massage program intensity for the driver's or front passenger seat # Tap on the application. The expanded view of the application is dis­played. # To close the menu: select G. Opening and closing the context menu for a sug­gestion # Press and hold on a suggestion. The context menu opens and shows the No Longer Suggest option, for example. # To close: swipe downwards. Removing a suggestion from the display area # Swipe the suggestion upwards. Showing all applications # To hide applications: briefly press © again. #Press ©briefly.Available applications 1 are displayed. Theglobal search is available.Switching between zero layer and home screen with classic menu # Long press on ©. The home screen with classic menu is shown. # To return to the zero layer: press and hold on ©. Home screen overview 1 Status line 2 Calls up user profile settings and switches user 3 Uses the global search 4 Calls up the Control Center (pull down) 5 Calls up favorites 6 Displays in the status line 7 Calls up an application Content sharing menu in the Control Center 8 Quick-access to application 9 Global menu G Calls up previous menu © Press and hold: switches between home screen and zero layer û Previous track or previous radio station ü Next track or next radio station % During a telephone call, the call duration is displayed in global menu 9. The following functions are called up in the Con­trol Center: R Notifications Center R Content sharing menu R Favorites R Vehicle quick-access 4 Displays animation for content sharing Example: content sharing menu1Calls up a menu2Central display with active content (cover dis-play)3Front passenger display5 Ä Bluetooth® headphones connected to the front passenger display on the right To share content, drag a display and drop it over another display. To control media playback, tap a display. Operating the MBUX multimedia system Using Touch Control 1© Shows the home screen2Touch Control=9Ì: swipe in the direction of the arrow (navigate) a Press (confirm) 3 G Returns to the previous display 4 6 Makes or accepts a call 5 ~ Rejects or ends a call 6 To increase volume: swipe upwards To reduce volume: swipe down 8 Switches off the sound: press 7ß Calls up favorites (press briefly) or adds favorites (press and hold) 8 £ Starts the MBUX Voice Assistant You can navigate through menus and lists via the touch-sensitive surface of Touch Control 2 using a single-finger swipe, for example: # To enter a character: select a character using the keyboard and press on Touch Control 2. # To select a menu option: scroll in a list and press Touch Control 2. # To move the digital map: swipe in any direc­tion. Using the touchscreen Example: control elements for vehicles with acentral display1Fingerprint sensor2Switches the MBUX multimedia system on oroff3Switches the mute function on/offExample: control elements for vehicles withan MBUX Hyperscreen1Adjusts the volumePress ±, or q.2Fingerprint sensor3 Switches the MBUX multimedia system on or off 4 Switches the mute function on/off # To select a menu item or entry: tap on a sym­bol or an entry. # To increase the map scale: tap twice quickly with one finger. # To reduce the map scale: tap with two fingers. # To enter characters with the keypad: tap on a button. # To navigate in menus: swipe up, down, left or right. # To use handwriting to enter characters: write the character with one finger on the touchscreen. # To zoom in and out of the map: move two fin­gers together or apart. # To enlarge or reduce the size of a section of a website: move two fingers together or apart. # To turn the digital map: turn counter-clockwise or clockwise using two fingers. # To move the digital map: touch the touchscreen and move your finger in any direction. # To save the destination in the digital map: touch the touchscreen and hold until a mes­ sage is shown. # To set the volume on a scale: touch the touchscreen and move the finger to the left or right. # To call up a global menu in the applications: touch the touchscreen and hold until the Options menu appears. Function of the MBUX voice assistant & WARNING Risk of distraction from infor­mation systems and communications equipment If you operate information systems and com­munication devices integrated in the vehicle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. # Only operate this equipment when the traffic situation permits. # If you cannot be sure of this, stop the vehicle whilst paying attention to road and traffic conditions and operate the equipment with the vehicle stationary. For your own safety, always observe the following points when operating mobile communications equipment and especially your voice control sys­tem: R Observe the legal requirements for the coun­try in which you are driving. R If you use the voice control system in an emer­gency your voice can change and your tele­phone call, e.g. an emergency call, can thereby be unnecessarily delayed. R Familiarize yourself with the voice control sys­ tem functions before starting the journey. Using the MBUX voice assistant, vehicle functions and various areas of the MBUX multimedia system can be operated by voice input. The MBUX voice assistant is operational approximately half a minute after switching on the vehicle and can be operated from all seats. Further information and examples of voice commands can be found in the Digital Operator's Manual. You can use the MBUX voice assistant to operate the following functions depending on the vehicle equipment: R Telephone R Text message and e-mail R Navigation R Radio and media R Vehicle functions R Online functions Full functionality of the voice control system is only available for you with activation of online voice control. Conducting a dialog Starting a dialog # Say "Hey Mercedes" to activate the MBUX Voice Assistant. Voice activation must be switched on in the multimedia system. or # Press the £ button on the multifunction steering wheel. A blue line appears in the MBUX multimedia system. The dialog can be started. For the dialog with the MBUX Voice Assistant, you can use complete sentences of colloquial lan­guage as voice commands. Voice activation can also be directly combined with a voice command, e.g. "Hey Mercedes, how fast can I drive?". Calling up help # For information about the MBUX Voice Assis­tant: say "Hey Mercedes, what can you do?" # Digital Operator's Manual: "Show me the Operator's Manual". The full extent of the Dig­ital Operator's Manual is available when the vehicle is stationary. Operating functions (examples) # To operate the navigation: "Search for an Asian restaurant, but not Japanese, in South London." # To operate the phone: "Call my father." # To change the system language to English (short command): "Change language to Eng­lish". # To operate the radio: "Show me the list of radio stations." # To operate media: "Switch on random play­back." # To operate vehicle functions: "Switch the seat heating to level 2." # To operate online functions: "What's the time in Sydney?" # To ask a question about the vehicle: "Do I have Blind Spot Assist?" Function of the driver camera The driver camera is located in the driver's dis­ play. The driver camera detects the following character­ istics: R Head position R Viewing direction R Eyelid closure characteristics R Driver's face % The driver camera records image data for applications such as ATTENTION ASSIST and facial recognition, for example. The camera converts the image data directly into meta data. No image data is saved in the process. The data is only processed in the vehicle and is not transmitted from the vehi­cle. % The driver camera is automatically activated each time the vehicle is opened with the key. The current status of the è driver camera is shown in the status line of the central dis­play. The driver camera must be set up for face detec­tion before use. Teaching-in biometric data (/ page 300). System limits The system may be impaired or may not function in the following situations: R The camera is covered or dirty, fogged up or scratched. R The driver's face and/or eyes are covered. R The driver is wearing glasses that block infra­red. Display messages In the following situations display messages may be shown: R The driver camera is inoperative. The camera is faulty. The Driver Camera Inoperative See Opera-tor's Manual message appears. R The driver camera cannot capture the position of your head. The Change the steering wheel/ seat posi­tion until 6 dots are visible on the upper edge of the screen. message appears. R The view of the driver camera is reduced or restricted. The Driver Camera View Currently Restricted See Operator's Manual message appears. Notes on care Please comply with the notes on caring for the interior (/ page 349). Switching the driver camera on or off Multimedia system: 4 © 5 Settings 5 System 5 Intelligent Assistance # Select On or Off. When the driver camera is switched off, the fol­lowing functions are not available or limited: R The microsleep detection of ATTENTION ASSIST (/ page 219) R The facial recognition This function serves as sensor input for authentication and unlocking of the user pro­file and protected applications. (/ page 300) Information on users, suggestions and favorites & WARNING Risk of becoming trapped dur­ing adjustment of the driver's seat after calling up a driver profile Selecting a user profile may trigger an adjust­ment of the driver's seat to the position saved under the user profile. You or other vehicle occupants could be injured in the process. # Make sure that when the position of driv­er's seat is being adjusted using the mul­timedia system, no people or body parts are in the seat's range of movement. If there is a risk of someone becoming trap­ped, stop the adjustment process immedi­ately: # a) Tap the warning message on the cen­tral display. or # b) Press a memory position button or a seat adjustment switch on the driver's door. The adjustment process will be stopped. The driver's seat is equipped with an access pre­ venter. If the driver's door is open, the driver's seat will not be set after calling up the driver's profile. User profiles and user-specific content Prerequisites for the vehicle owner: R You have a Mercedes me user account. R You have a Mercedes me PIN. R You have agreed to the terms of use. R The vehicle is linked to a Mercedes me user account. % If one of the pre-requisites listed is missing or if no user profile has been selected, the data described in the following section will be saved in the vehicle as the standard setting. Standard settings can be changed by all vehi­cle users. User profiles save personal settings. If the vehicle is used by several people, a person can change their profile settings without changing the settings of other users. You can individualize a user profile in the vehicle using the set-up assistant or using the settings in your user profile. Some settings, e.g. the Mercedes me PIN and a profile photo are made in the Mercedes me App or in the Mercedes me Por­tal. User-specific content and applications with per­sonal data are protected by different levels of security. To access protected content, the Mercedes me PIN and, depending on the vehicle equipment, biometric sensors can be used. % The security level is set by the multimedia sys­tem and calculated from the combination of all sensor inputs. Some security levels cannot be turned off. % When a user profile is activated, the following personalized comfort systems, for example, can be adjusted or their settings loaded: R Seat R Ambient light R Outside mirrors R Blinds R Climate control settings If the user profile is activated when driving then the driver's seat position will not be adjusted. Depending on the vehicle equipment you can, as a user, save the following settings, for example: R Driver's seat, steering wheel and mirror set­tings R Climate control R Ambient lighting R Radio (including station list) R Suggestions and favorites Suggestions The vehicle can learn the habits of the driver. It then makes suggestions regarding navigation des­tinations, phone numbers and music preferences. The requirements for that are the selection of a user, your consent to the recording of data and sufficient collected data. Favorites Favorites offer you quick access to frequently used applications. 100 favorites are available in total. Configuring users, suggestions and favorites Requirements: R To use the set-up assistant: the vehicle is sta­tionary. Multimedia system: 4 © 5 f 5 Change User Adding a user # Select fAdd User . A QR code is loaded. # Scan the displayed QR code with the Mercedes me app or any QR code scanner on a mobile device. If the Mercedes me app is not yet installed on your mobile device, you will be directed to the store of your mobile device. # Follow the directions in the app. The vehicle is connected with your Mercedes me user account. This automatically creates your user profile in the vehicle. If only your user profile is available, it will be loaded automatically. If more than one user profile is available, you will be directed to the user selection. When the vehicle is stationary, the set-up assistant starts automatically after user selec­tion. Protecting user-specific content and applications If you add a new user, access protection is already activated for the user profile. The Mercedes me PIN and, depending on the vehicle equipment, biometric sensors are available for access. Biometric sensors must be taught in the vehicle. The authentication process then takes all taught-in and available sensors into account. The following user-specific content and applica­tions are protected, for example: R User selection and user profile settings R Biometric sensors The teaching-in of biometric sensors is protec­ted. R Suggestions The data and determination of the most prob­able navigation destinations, media sources, radio stations, contacts and messages are protected. R ENERGIZING COACH The recorded health data and their evaluation are protected. R Mercedes me connect store The purchase of services is protected. # Switch Protect Content on or off. # Switch Access Protection on or off. % When access protection is switched off, your user profile can be viewed from any seat and changes can be made. % Access protection is switched on or off on a vehicle-specific basis. Teaching in, editing and deleting biometric data The biometric data models are saved in the sen­sors in the vehicle. If recognition has been taught-in, this sensor serves as a contributory factor for authentication on the multimedia system. # Select Protect Content. # Select Facial Recognition, Fingerprint Recog­nition or Voice Recognition. % If necessary, authenticate yourself on the mul­timedia system. Authenticating using face recognition # Close the driver's door or fasten the driver's seat belt. # Look at the driver's display for about five sec­onds. Your face is scanned. A message in the driv­er's display shows whether facial recognition was successful or not. You can unlock your user profile and protected applications with the facial scan. Authenticating using fingerprints # Place and lift your finger several times on the fingerprint sensor under the touchscreen (/ page 286). The finger is scanned. If the scanning proce­dure is successful, a message appears on the central display. You can unlock your user pro­file and protected applications with your finger print. # Speak the sentence shown on the central dis­play and follow the voice assistant's instruc­tions. If the voice recognition was successful, a mes­sage appears on the central display. You can unlock your user profile. % Avoid background or disturbing noises during voice recognition. Deleting biometric data # Tap on E , for example, behind Facial Rec­ognition. # Select Yes. Teaching in the vehicle SmartKey for profile selec­tion # Select Protect Content. # Select SmartKey Recognition. # Have the SmartKey ready and follow the set­ up assistant's prompts. The user profile is linked to the selected SmartKey. If you open the vehicle with the SmartKey, the light, mirror and seat settings for your user profile are pre-activated. The SmartKey you are currently using for unlock­ing is used. The SmartKey is only stored for the driver and for one user profile. Selecting a user % When you call up your driver profile, the driv­ er's seat and the steering wheel can be set. You can cancel the setting process with the following actions: R Press Tap Here to Cancel message on the central display. R Press one of the seat operating buttons in the driver's door. # Select Change User. # Select a user. # When requested to do so, authenticate with the Mercedes me PIN or a taught-in biometric characteristic. The user profile is loaded and activated. % If you select Continue Without Selecting a User, no specific settings for the user profile are loaded. Configuring and deleting suggestions # Select ©. # Select Settings. # Select System. # Select Suggestions. # Select Z. # Switch the options on or off individually. If an option is switched on and sufficient data has been gathered, personalized suggestions based on your user behavior will be offered to you on the zero layer. These are, for example, visited navigation destinations, dialed phone numbers as well as suggestions based on your music preferences. # To delete collected suggestions: select Î. # Select Yes. The suggestions are reset. Adding favorites from categories # Select ©. # Select ß. # Select r. # Select W Create New Favorite. # Select the category. # Select a favorite. Overview of the system settings menu In the system settings menu, you can make set­tings in the following menus and control ele­ments: R Display -Display brightness -Decorative image for the front passenger display (vehicles with MBUX Hyperscreen) R Control elements -Keyboard language and handwriting recog­nition -Sensitivity of the Touch Controls -Haptic operation for the touchscreen R MBUX voice assistant R MBUX Interior Assistant R Sound -Entertainment -Navigation and traffic announcements -Telephone -Voice amplification R Data protection R Connectivity -Wi-Fi, Bluetooth®, NFC R Time & date R Language R Units for distance R System PIN R Suggestions R Software update R System reset Overview of software updates Important software updates may be necessary for the security of your multimedia system's data. Install these updates, or else the security of your multimedia system cannot be ensured. The multimedia system displays a corresponding message when a software update is available. If the Automatic Online Update option is active, software updates are downloaded automatically. If the option is deactivated, you will be informed of new software updates once. The software updates are available for downloading for a limited period of time. Carrying out a software update: R You can start software updates via the com­munication module. R You can start software updates via a Wi-Fi hot-spot. R You can start map updates from an external medium. % Online software updates cannot be performed via external Wi-Fi hotspots that are encrypted using TKIP. % To complete software updates via the commu­nication module, the vehicle must be connec­ted with the Internet and a Mercedes me user account. % To complete software updates via Wi-Fi, the vehicle must be connected to an external Wi-Fi hotspot. A software update consists of three steps: R Downloading or copying of the data required for installation R Installation of the downloaded software update R Activation of the downloaded software update. % It may be necessary to restart the MBUX mul­timedia system after completion of a software update. % While some software updates are being down­loaded, the multimedia system cannot be operated and the vehicle functions may be restricted. % Some software updates require a safe vehicle status for the installation to be completed. They can only be carried out in a safely parked vehicle with the vehicle switched off. For software updates requiring a safe vehicle sta­tus: when the last installation step is reached, a message appears on the central display after the vehicle is switched off. Follow the step-by-step instructions on the central display to complete the installation. There are software updates that can only be installed when the vehicle is safely parked, there are no more people in the vehicle and the vehicle is locked. Availability of the driver's and central display During the installation of software updates, it is not possible to use the vehicle, central display and driver's display. You may receive the following display message when an installation is running: % The display message does not appear every time a software update is installed. In rare cases, an error can occur during the instal­lation. The multimedia system automatically attempts to restore the previous version. If it is not possible to restore the previous version, the display message shown above appears every time the vehicle is started. Failure of the driver's display If the driver's display fails or there is a malfunc­tion, you may not recognize limitations in the functions of systems relevant to safety or the speed display, for example. The operating safety of the vehicle may be impaired. Drive on carefully and have the vehicle checked at a qualified spe­ cialist workshop immediately (/ page 432). Further information about software updates can be found at https://me.secure.mercedes­ benz.com. Failure of the central display If the central display fails or the display message shown above is shown continuously, several sys­tems such as the rear view camera, PARKTRONIC or climate control are no longer available. Drive on carefully and consult a specialist workshop as soon as possible. Front passenger display failure (only vehicles with MBUX Hyperscreen) If the front passenger display has failed or a dis­play message appears permanently, functions and systems are no longer available via the front passenger display. Visit a qualified specialist work­shop. Setting up a Wi-Fi hotspot Requirements R The Wi-Fi function is activated on the multime­dia system and the communication device to be connected. R The communication device to be connected supports at least one of the types of connec­tion described. The connection types shown depend on the device to be connected. The function must be supported by the multimedia system and by the device to be connected. The type of con­nection established must be selected on the multimedia system and on the device to be connected. % Some functions may first need to be activated on the communication device being connec­ted. More detailed information can be found in the manufacturer's operating instructions. % The use of the vehicle data tariff by external devices is not available in all countries. Multimedia system: 4 © 5 Settings 5 System 5 Internet and Bluetooth % The availability of the functions is dependent on the country. # Select Wi-Fi. The controller is to the right: Wi-Fi is switched on. When the Wi-Fi function is switched on, you can connect the multimedia system with external hot-spots or make it available as a hotspot for external devices. When the Wi-Fi function is switched off, it is not possible to establish a hotspot connection. % Depending on the vehicle equipment, you can purchase a data package directly from a mobile phone network provider via the Mercedes me Store. To be able to use the data package, you conclude a separate con­tract with a mobile phone network provider via the Mercedes me Store, which can be ter­minated at any time and for which there are no costs. This contract is a prerequisite for using the services from the previously pur­chased package. The availability of this option is dependent on the country. If the data pack­age option is not available or can be upgra­ded, you can purchase data volume directly from the mobile phone network provider for a fee. % The use of the vehicle data tariff by external devices is not available in all countries. Using the multimedia system as a Wi-Fi hotspot # Select MBUX Hotspot. # Select one of the following connection options. Connecting using a QR code Requirement: an app for scanning the QR code is installed on the device being connected. Alternatively: the device being connected has an integrated QR code scanner (see manufacturer's operating instructions). # Scan the QR code shown. The Wi-Fi connection is established. Connecting using NFC # Activate NFC on the device to be connected. # When the NFC icon is displayed in the MBUX Hotspot menu, hold the device to be connec­ted to the NFC interface. # Follow the instructions on the device. The Wi-Fi connection is established. Connecting using a security key # Select the vehicle from the device to be con­nected. The vehicle is displayed with the MBUX XXXXX network name. # Enter the security key which is shown in the central display on the device to be connected. # Confirm the entry. Generating a new security key # Select the hotspot name MBUX XXXXX in the MBUX Hotspot menu. # Confirm the prompt with Yes. A new security key is generated. A connection will be established with the newly created security key. % When a new security key is generated, all existing Wi-Fi connections are then discon­nected. If the Wi-Fi connections are being re­established, the new security key must be entered. Using a mobile communication device as a Wi-Fi hotspot (tethering) % This function is country-dependent. # Select the Manage Internet Access option in the Internet and Bluetooth menu. % The Wi-Fi function on the mobile phone and Internet access via Wi-Fi must be activated (see the manufacturer's operating instruc­tions). # Select Search for Access. # Select the network. # Log in to the Wi-Fi network. or # Select the mobile phone with the ö Wi-Fi symbol. % With external Wi-Fi hotspots, which are encrypted via TKIP, online software updates cannot be carried out via the external Wi-Fi hotspot. System language ¦Notes on the system language This function allows you to determine the lan­guage for the menu displays and the navigation announcements. The selected language affects the characters available for entry. The navigation announcements are not available in all languages. If a language is not available, the navigation announcements will be in English. ¦Setting the language Multimedia system: 4 © 5 Settings 5 System 5 Language Setting the system language A list of the available system languages is shown. # Select a language. The system language is switched to the selec­ted language. Resetting the multimedia system (reset function) & WARNING Risk of accidents due to failure of the central display functions While the multimedia system is being reset, its functions such as the rear view camera are not available. # Only reset the multimedia system when the vehicle is stationary. Requirements: R The vehicle is switched on. R Some settings can only be reset when the vehicle is stationary. Multimedia system: 4 © 5 Settings 5 System 5 Reset When resetting the system, personal data and set­ tings are deleted, for example: R Connected devices R Individual user profiles R Biometric data R Vehicles with rear telephony: handset connec­tion % The data used and saved in the multimedia system by the driver assistance systems is deleted. % Vehicles with rear telephony: The handset must be in the cradle while the system is reset. # Select Reset. A query appears asking if the system should really be reset. # Select Yes. The multimedia system is reset to the factory settings. The multimedia system is restarted after the system reset. % Due to data protection, as well as the function of individual driving systems and driving safety systems, it is a requirement to carry out a complete system reset before selling the vehi­cle or transferring it to a third party, or after use as a rental car. Function of AMG TRACK PACE % This function is an on-demand feature and can be activated via Mercedes me after you purchase your vehicle. The Digital Operator's Manual contains further information on Mercedes me and on-demand features. With AMG TRACK PACE, the driving characteris­tics on race tracks can be analyzed and opti­mized. You can drive previously saved race tracks (e.g. Hockenheimring), or record and save new tracks. The driven lap times are stored for every track. These can be analyzed and compared with other lap times to achieve the best possible race results. Additionally, acceleration and braking pro­cedures can be measured and stored. Note: Use AMG TRACK PACE only on closed-off routes outside the public traffic area. Adapt your driving style to your personal performance and environmental conditions. As the driver, you are solely responsible for driving your vehicle. Park your vehicle safely before operating the applica­tion. Setting Track Race Multimedia system: 4 TRACK PACE 5 Track Race Recording a new track # Select New Track. # Select Ì Start Recording at the desired starting point. The track recording starts at this point. During track recording, sectors can be set to divide up the track. # ö Select Set Sector. # Select É Stop Recording to end track recording or cross the starting line again. # Confirm the prompt with Yes. # Select the weather. % The temperature is determined automatically. # Enter a name. # Press a to confirm. The track is saved under the name entered. Searching by track name # Select ª Search. # Enter the track name. Tracks with the searched name are displayed. Measuring time on a saved track # Select All tracks. # Select the desired track. # Select u. # Select Start Time Recording if you are already at the starting line. or # Select Navigate to for navigation to the start­ing line. Timing begins automatically when the starting line has been crossed. % When ¨ is selected, the track display can be switched to AR. In addition, it is possible to switch to the telemetry display by selecting ò. # Select ð Stop timing to end timing. # Confirm the prompt with OK. # Select the weather. # Select Yes to save the times driven for this track. Showing readings during Track Race The following readings can be shown: R Tire temperature R Miniature map R Sector overview R Engine data R G-force display R Lap overview # Select ï Start Time Recording . # Select . # Drag the desired display from the grid on the left or right edge of the central display. The readings are shown during the Track Race. By selecting ¨ on the active display, you can deactivate this. Displaying the analysis # Select All tracks. An overview of all the driven tracks appears. # Select a track. # Select a session. The following data are displayed: R Lap and sector times R Average and top speed R Driver R Vehicle R Date R Weather # Select Add Recording to use a different ses­sion as a reference value. # Select % to return to the overview. # Select Diagram. # Set the desired parameters. The analysis is displayed. 1 Lap overview 2 Parameter overview 3 Editing parameters 4 Deleting parameters 5 Adding new parameters % The following values can be set for the param­eters, for example: R speed R Longitudinal/lateral acceleration R Steering angle R Engine speed R Engine oil/tire temperature Based on the analysis, you can check and opti­mize the driving behavior for any position on the track. Exporting tracks (USB) # Select õ Tracks. An overview of all stored tracks appears. # Select the desired track. # Select options u for the desired track. # Select Export Track to…. The selected track can be exported to a USB storage device connected to the vehicle. Editing tracks and recordings # Select õ Tracks. # Select the desired track. # Select options u for the desired track. # Select Rename or Delete. or # Select a track. # Highlight the desired recording. # Select u options. # Select Export to… or Delete. Setting Drag Race Multimedia system: 4 TRACK PACE 5 Drag Race Measuring acceleration # Select Z Drag race options. # Select Acceleration. # Set a starting speed or select Automatic. Measurement begins as soon as the specified starting speed has been reached. # Set a target speed. Measurement stops as soon as the specified target speed has been reached. # Start off and begin the measurement. Measurement begins when the vehicle accel­erates. Measurement can be stopped early by interrupt­ing the acceleration procedure. Quarter mile race # Select Z Drag race options. # Select Quarter Mile. # Set a target distance. Measurement stops as soon as the specified target distance has been reached. # Start off and begin the measurement. Measurement begins when the vehicle accel­erates. Timing runs until the target distance or a maximum of one mile has been traveled. Measurement can be stopped early by interrupt­ing the acceleration procedure. Measuring braking # Z Drag Race options # Select Braking. # Set a starting speed or select Automatic. # Start off and begin the measurement. # Brake to a stop. Measurement is incremental, in steps of 6 mph (10 km/h) to a stop. If the braking pro­cedure is started e.g. at a speed of 98 mph (157 km/h), measurement starts as soon as 93 mph (150 km/h ) has been reached Storing and calling up measured values If measurement is completed or canceled, a prompt appears asking whether the measurement should be saved. # Confirm the prompt with OK to save. Calling up saved measurements # ± Select History. # Select Acceleration, Quarter Mile or Braking. # Select a measurement. The desired measurement is displayed in detail. or # Delete a measurement. Calling up the telemetry display Multimedia system: 4 TRACK PACE 5 Telemetry The telemetry display shows current vehicle data as a digital value and as a diagram. Up to four parameters can be selected to be shown on the display. For example: R Engine speed R Wheel angle R Speed R Steering angle # Set the desired parameters. # Set the time period. The set parameters will be evaluated in the diagram for the selected time period. Configuring AMG TRACK PACE Requirements: To connect a mobile device to the TRACK PACE app: R The TRACK PACE app is installed on the mobile end device. R The mobile end device is connected to the multimedia system via Wi-Fi. Multimedia system: 4 TRACK PACE 5 Z Connect mobile device via the TRACK PACE app The TRACK PACE app makes it possible to record videos and to synchronize them with stored tracks. # Select TRACK PACE App. # Select Authorize a New Device. # Start the TRACK PACE app on the device to be connected. # Select Next and confirm the authorization prompt. A four-digit code is shown on the central dis­play. # Enter the code on the smartphone. The device is authorized. De-authorizing the mobile device # Select TRACK PACE App. # Select a device. # Confirm the message prompt with Yes. The device is de-authorized. Setting the TRACK PACE display on the head-up display and driver's display # Select IC and HUD Contents. # Activate or deactivate the desired contents. The contents on the head-up display and the driver's display are adapted. % For further information on the Head-up Dis­play (/ page 282). % Further information about the driver's display (/ page 280). Setting acoustic feedback # Select Acoustic Feedback. A scale with values from 0 to 10 is shown. # Select a setting. Displaying statistics # Select TRACK PACE Statistics. Statistics on the current user profile are dis­ played. The following data are displayed: R Driving time R Track driven R Recorded tracks R Recorded Track Races R Laps recorded R Recorded Drag Races R Maximum design speed Activating the ambient light If this function is active, the vehicle interior is lit in red or green depending on delta time. # Select Ambient Lighting. # Activate or deactivate the function. Adjusting the dashcam If the vehicle is equipped with a dashcam, it can be used in AMG TRACK PACE. # Select Dashcam. # Select Track Race or Drag Race and activate Activate Recording. # You can set which overlay is to be used in the recorded video under Video Overlay Content. Calling up the energy flow display Multimedia system: 4 © 5 Info # Select Energy Flow. The energy flow in the vehicle will be dis­played. Notes on navigation Route guidance with augmented reality & WARNING Risk of accident and injury as a result of distraction, incorrect depiction or wrong interpretation of the display The camera image of the augmented reality display is not suitable as a guide for driving. # Always keep an eye on the actual traffic situation. # Avoid extended observation of the cam­era image. & WARNING Risk of accident and injury due to imprecise positioning of additional information The additional information from the augmen­ted reality display may be inaccurate and is not a substitute for observing and assessing the actual driving situation. # Always keep an eye on the actual traffic situation when carrying out all driving maneuvers. Switching navigation on Multimedia system: 4 © # Alternatively, press the © button on the steering wheel on the right (/ page 295). The Zero Layer with the digital map is dis­played. Navigation overview 1 Navigation module (reduced view) or EQ mod­ule (reduced view) Route guidance active: Reduced view of the navigation module shows information relevant to the route, e.g. the next charging stop, the destination and a delay £ Ends the current route guidance Tapping opens the navigation module in the expanded view with the Route Route guidance not active: EQ module is shown in the reduced view Tapping opens the EQ module in the expan­ded view with the charging functions 2 Destination entry 3 Calls up the Control Center in the status line 4 Current vehicle position (vehicle symbol or arrow) 5 Display area with entertainment sources, phone, active applications and suggestions 6 Searches for POIs, e.g. charging stations w and parking facilities j, as well as set­ting map orientation and map type 7 Navigation window shows the next driving maneuver (zoomed out view) or the route monitor (zoomed in view) For example, with active route guidance, route sections of the route list, representations of upcoming driving maneuvers, lane recommen­dations . Switches off navigation announcements Ì Switches on navigation announcements The following map orientations 6 are available: R 2D and to the north R 2D and direction of travel R 3D and direction of travel R Map with complete route % If the map is moved, the map switches between 3D direction of travel and 2D north orientation. The following map types 6 are available: R Daytime display R Night-time display R Satellite map % If you notice a problem with the digital map you can report this under https:// mapfeedback.here.com/#/report. Navigation module (expanded view) 3 Distance from current vehicle position and remaining driving time 4 Searches for an additional charging station EQ module (expanded view) 1 Arrival time at charging stop, type of charging station 2 Charging stop shows the charging time rec­ommended by the Navigation with Electric Intelligence as well as states of charge on arrival and onward journey for an optimal travel time 1Sets the charging program (/ page 203)2Current state of charge of the high-voltagebattery3 Maximum state of charge (depending on the setting) 4 Sets the next charging break (to use a less expensive tariff) 5 Setting the departure time 6 Opens the socket flap 7 Activating or deactivating ECO charging Overview of the toll system % The toll system is optional equipment and is not available in all vehicles. Debiting of toll charges at freeway toll gates is facilitated with an electronic payment system. The toll system uses RFID (Radio Frequency Iden­tification) for data transfer between the control unit and the toll station. The toll system is initially switched off at the fac­ tory. The control unit is in the vehicle glove compart­ment. In order to be able to use the toll system, it must have been registered by the customer and activa­ted by the service provider: R Activate the toll system in the settings of the MBUX multimedia system or on the control unit. R There are two ways to register and activate: -In the Mercedes me App, register the unit identification number of the control unit and activate the toll system. -Alternatively, you can register and activate via the Toll Service app. Activation of the toll system can take up to 48 hours after registration. When the toll system is activated, the number of vehicle occupants is first preset by the factory at one person. In order to use the toll system, the device in the glove compartment or in the MBUX multimedia system must be switched on. The following applies for roads on which toll charges are dependent on the number of vehicle occupants: R If the automatic detection of the number of vehicle occupants is switched off, the number of vehicle occupants must be selected man­ually. This ensures correct toll accounting. R The number of vehicle occupants can be transmitted automatically. In the process, the number of seat belts worn is determined. If the number of detected persons does not correspond with the number of persons actually in the vehicle, the number of persons must be manually selected. The standard setting of one person does not need to be changed for roads which require toll pay­ment regardless of the number of vehicle occu­pants. The toll system enables the payment of toll charges in many states of the USA. % In Mexico, for example, the toll system can be registered and activated for journeys to the USA. Notes on use R Drive at the prescribed vehicle speed in the toll lane. R The toll will be debited automatically only after registration and activation of the toll system. R For safety reasons, entries should be made while the vehicle is stationary. R For further information, please consult the Mercedes me App or an authorized Mercedes-Benz Center. Or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada). For information on how to register and activate the toll system, see the Digital Operator's Manual. Entering a destination Requirements: R For online search: an Internet connection is established. R Mercedes me connect is available. R You have set up a user account in the Mercedes me Portal. R The vehicle is connected with the user Multimedia system: account and you have accepted the terms of 4 © 5 ª Where to? use. Further information can be found at: https:// www.mercedes.me. R The service is available. R The service has been activated at an author­ized Mercedes-Benz Center. Example: entering a POI or address1Input line2POI search3Selects destination search, displays furtherdestination searches with double arrow4Deletes the last character entered5 Hides the keypad 6 Switches to handwriting recognition 7 Starts the MBUX voice assistant 8 Sets the written language 9 Switches to digits and special characters A Switches to upper-case or lower-case letters # Enter the destination in 1. The entries can be made in any order. The search results are displayed in a list. % Online search results for POIs may contain additional information, for example opening times and prices. The information is provided by an online map service. This online function is not available in all countries. % You can enter a destination as a three-word address from what3words. This option is not available in all countries. # Hide the keyboard with a. # Select the destination in the list. The route is calculated. % Observe the notes on the MBUX multimedia system (/ page 286). Calculating a route with Electric Intelligence and using settings for route guidance Requirements: R The destination has been entered. R The destination address is shown. R For navigation with Electric Intelligence: - Mercedes me connect is available. - You have a Mercedes me connect user account and the vehicle is connected with the account. -The "Navigation with Electric Intelligence" service is available and activated in the Mercedes me Portal. The services "Navigation with Electric Intel­ligence", "Display of charging stations" and "Mercedes me Charge" are required for optimal function. -The Plan Charging Stops route option is switched on. Example: detailed display 1 Saves destination as a favorite (Plan Charg­ing Stops is switched on) Calls up alternative routes (Plan Charging Stops is switched off) 2 Calculates the route and starts route guid­ance 3 Selects a point of interest in the vicinity of the destination 4 Destination information, online content (e.g. weather information), three-word address from what3words, saves destination as favor­ite, shares destination After selecting a destination, Electric Intelligence automatically and intelligently calculates the route to the destination. This is updated during route guidance. The route with Electric Intelligence con­tains the required charging stations as intermedi­ate destinations. The charging stations are deter­mined taking account of the driving distance and the estimated charging times. # Select one of the options. % When the Plan Charging Stops route option is switched off, a route without charging stations is calculated. Saving a destination as a favorite # Select ß Favorite. # Select an option. Calling up the route overview % When Plan Charging Stops is switched off, this option is available instead of the favorites function. # Select Routes. # Select an alternative route. Starting route guidance # Select ¥ Let's Go!. Calling up the detailed display with destination address # Pull the bar above the ¥ Let's Go! symbol upwards. Depending on the destination selection and availability, online content, for example rat­ings, prices and weather information, is shown. If the destination is in a different time zone, a message is displayed. # To share a destination: select Ç Share. This option allows you to scan the displayed QR code. # To call up an Internet address: if a web address is available, select www. # To call the destination: if a telephone number is available, select Call. Searching for POIs in the vicinity of the destina­tion shown # Select In The Vicinity. # Search using categories, enter a search entry or search for a personal POI . Switching on the Electric Intelligence route option # Select Z in the navigation module (/ page 314). # Select Route. # Activate Plan Charging Stops. If the route has been calculated and the condi­tion of charge of the high-voltage battery is not sufficient to reach the destination, charg­ing stations are set automatically is intermedi­ate destinations. Setting the condition of charge of the high-voltage battery when the charging station and destination are reached # Select Z in the navigation module (/ page 314). # Select Route. # Select State of Charge at Destination or State of Charge at Charging Stations. # Move the control knob to the left or right and set the preferred condition of charge in per­cent (%). The destination or charging station along the route is reached with the set condition of charge. To reach a charging station, the system uses the battery capacity, e.g. up to 10% residual energy content (condition of charge). You can increase this condition of charge on arrival at the charging station and destination, e.g. to 25% at the charg­ing station and 50% at the destination. % In the event of increased energy consumption while driving, e.g. with headwind, the following options are available on the system side: R The charging station is safely reached even at states of charge of less than 10 %. R Navigation with Electric Intelligence selects a closer charging station for the route. % If a charging facility is available at the destina­tion, the condition of charge can be lowered below 10 %. The Min. message appears on the central display. Make sure that the range monitor is switched on. Selecting a provider for charging stations # Select Z in the navigation module (/ page 314). # Select Route. # Activate or deactivate Mercedes me Charge. If the option is activated, only charging sta­tions payable with Mercedes me Charge are taken into account when selecting the charg­ing station. or # Activate All. All charging stations known to the navigation system are taken into account when calculat­ing routes with Electric Intelligence, regardless of the type of payment. It may be necessary to register with the pro­vider. Switching the range monitor on or off The activated range monitoring assists with mes­sages on the driver and central display to ensure safe arrival at the destination. # Select Z in the navigation module (/ page 314). # Select Route. # Activate or deactivate Range Monitor. To reach the destination with the condition of charge set by the driver, the range is perma­nently monitored when the option is switched on. % This function is not available in all countries. Displaying a route overview with charging station 1 Arrival time at charging stop, type of charging station 2 Charging stop shows the charging time rec­ommended by the navigation with Electric Intelligence as well as states of charge on arrival and onward journey for an optimal travel time 3 Distance from current vehicle position and remaining driving time 4 Searches for an additional charging station You can influence the route calculated by the nav­igation with Electric Intelligence using options 1 and 4. # Select one of the options. Ignoring a charging station If you do not want to drive to the selected charg­ing station, it can be removed for the current route guidance. The navigation with Electric Intelli­gence tries to plan the best possible alternative charging station for the route. # Select 1. The expected charging power, the dynamic charge level display as well as the current con­dition of charge and the predicted charging target are displayed, for example. # Select Ignore. # Select Ignore during this journey. The charging station is removed from the cur­rent route. % After selecting Details, the detailed informa­tion about the charging station is displayed. Adding a charging station If you want to drive to a charging station earlier on the route, for example, you can search for an additional charging station. If the charging station is suitable for the route, it will be accepted by the navigation with Electric Intelligence. # Select 4. # Select a charging station. % You can also search for a charging station using the w symbol on the digital map or next to ª Where to?. Selecting a route type # Select Z in the navigation module (/ page 314). # Select Route. The route is calculated as a fast route with a short journey time. Trailer mode is available if a trailer has been coupled with the vehicle. If available, you can select online routes. Traffic announcements for the route are taken into account via Reroute Based on Traffic r. % Trailer mode and online routes are not availa­ble in all countries and for all vehicles. Activating a commuter route % A user profile has been created and Allow Destination Suggestions has been activated in the user options (/ page 300). Route guid­ ance is not active. # Select Z in the navigation module. # Select Route. # Activate Activate Commuter Route. The navigation system automatically detects that the vehicle is on a commuter route. For the daily commuter route, traffic events on the route are also reported when driving with­out active route guidance. # To select or delete a commuter route: selectStart or ¨. Avoiding or using route sections, e.g. highways or ferries # Select Z in the navigation module. # Select Route. Activating route guidance with augmented reality # Select Z in the navigation module. # Select View. # Select Augmented Reality Video. # Activate or deactivate Augmented Reality Video. The AR camera's video image is shown on the central display before a turning maneuver. The video image includes additional information. Showing property information for route guidance with augmented reality Road guidance with augmented reality is activa­ted. # Select Z in the navigation module. # Select View. # Select Augmented Reality Video. # Activate Street Names and House Numbers. During route guidance, the activated options are shown as additional information in the camera image. Using map functions Multimedia system: 4 © Increasing map scale # When the map is shown, tap twice quickly with one finger on the central display. or # Move two fingers apart on the central display. Decreasing map scale # Tap with two fingers on the central display. or # Move two fingers together on the central dis­ play. Moving the map # When the map is displayed, swipe in any direc­tion with one finger on the central display. # To reset the map to the current vehicle posi­tion: select \ Center . Selecting map orientation # Tap repeatedly on the Ä compass symbol on the map. The map orientation changes in this order: R The 3D map view is aligned to the direc­tion of travel. R The 2D map view is aligned to the direc­tion of travel. R The 2D map view is displayed so that north is always at the top. R The map shows the complete route. Using services Requirements: R There is an Internet connection. R Mercedes me connect is available. R You have set up a user account in the Mercedes me Portal. R The vehicle is connected to a user account and you have accepted the conditions of use for the service. Further information can be found at: https:// www.mercedes.me R The service is available. R The service has been activated at an author­ized Mercedes-Benz Center. Multimedia system: 4 © Showing traffic information # In the navigation module (expanded view), select Z (/ page 314). # Select View. # Activate Traffic. # Activate Traffic Incidents and Free Flowing Traffic. Traffic incidents, for example roadworks, local area reports (e.g. fog) and warning messages, are shown on the route. The traffic delay is displayed for the current route. The smallest value for the display for traffic delays is a minute. Displaying hazard warnings If hazard warnings are available these can be shown as symbols on the map. The display depends on the settings for the Traffic Incidents option. # In the navigation module (expanded view), select Z (/ page 314). # Activate or deactivate Traffic Incidents. If the option is activated, all of the symbols are shown. If the option is deactivated, the symbols are only shown when there is a hazard warning. The following hazards may be shown on the map: R Accidents and breakdowns R Slippery roads, fog, crosswinds and heavy rain R Hazards reported manually R Vehicle with active hazard warning light R Roadworks R Additional hazards (if available) Displaying online map contents # In the navigation module (expanded view), select Z . # Select View. # Switch on an online service, e.g. Weather. Current weather information is displayed on the navigation map, e.g. temperature or cloud cover. The service information is not shown in all map scales, e.g. weather symbols. Parking service * NOTE Damage to the vehicle due to not observing the maximum permitted head­room clearance If the vehicle height is greater than the maxi­mum permitted headroom clearance, the roof and other parts of the vehicle may be dam­aged. # If the vehicle height is greater than the permitted headroom clearance, do not enter. # Observe the changed vehicle height with add-on roof equipment. * NOTE Vehicle damage due to failure to observe local information and parking conditions The data is based on the information provided by the respective service providers. Mercedes-Benz does not guarantee the accu­racy of the information provided in relation to the car park or parking area. # Always observe the local information and conditions. % This service is not available in all countries. # In the navigation module (expanded view), select Z and switch on Parking. # Tap on j in the map. # Select a parking option. The map shows the parking options in the vicinity. The following information is displayed (if avail­ able): R Destination address, distance from current vehicle position and arrival time R Information on the parking garage/parking lot For example, opening times, parking charges, current occupancy, maximum parking time, maximum access height. The maximum access height shown by the parking service does not replace the need for observation of the actual circumstan­ces. R Available payment options (Mercedes pay, coins, bank notes, cards) R Details on parking tariffs R Number of available parking spaces R Payment method (e.g. at parking meters) R Services/facilities at the parking option R Telephone number # Calculate the route (/ page 318). Notes on the dashcam * NOTE Observe legal regulations and data protection provisions You are legally responsible for operation and use of the dashcam functions. The legal requirements relating to operation and use of the dashcam can vary depending on the country in which the dashcam is oper­ ated. This function is not permitted in all countries. # Before using the dashcam, inform your­self about the content of the legal regu­lations, in particular the data protection regulations in the respective country of use. # Observe the legal regulations, in particu­lar the data protection regulations. % To ensure secure operation, only use FAT32 or exFAT formatted USB storage devices. % The file size and therefore the duration of sin­gle recording is limited by the limitations of the USB flash drive format. So FAT32 format­ted USB flash drives do not allow files larger than 4 GB, for example. When the file size is reached, the recording stops and you receive a notification. % The following functions are available in the Gallery app: R Switching write protection on or off R Deleting video files Selecting a USB device for a video recording with the dashcam Requirements: R At least one USB device is connected with the multimedia system . Multimedia system: 4 © 5 Apps 5 Dashcam # Select the USB symbol. # Select the USB device. % When USB devices contain multiple partitions, recorded video files are not always displayed in the recording list. Mercedes-Benz recommends that you use USB devices with one partition. Starting or stopping video recording with the dashcam Requirements: R For recording and saving a video file: a USB device is connected with the multimedia sys­tem. R The vehicle is switched on. Multimedia system: 4 © 5 Apps 5 Dashcam # If several USB devices are connected with the multimedia system, select a USB device (/ page 325). If no USB device is selected, a selection is made automatically when recording starts. # To select a recording mode: select Loop Recording or Individual Recording. Loop Recording records several short video files. When the memory is full, recording is continued automatically. In doing so, other files will be overwritten starting with the oldest file. Individual Recording stops recording when the memory limit is reached. An individual recording is automatically protected against being overwritten. # To start: select Start Recording. The length of the recording is shown. The Do not remove the storage medium during recording. Before removing the storage medium, eject it first. message appears. The video file is stored on the USB device. # To end: select End Recording. % In some countries, geo-coordinates (longitude and latitude) are shown in the video image. For technical reasons, the geo-coordinates may show greater inaccuracies. A report may appear in the following cases: R Individual Recording: the memory is full or there are only a few minutes recording time available. The video recording stops or will be stopped imminently. Change the USB device or delete a video file. R The camera is not functional, the Camera Unavailable message appears. Have the camera checked at an authorized Mercedes-Benz Center. R If the country border indication has been switched on. R If an outdoor recording is started with the camera app during a dashcam recording, the dashcam recording pauses and resumes auto­matically after the camera recording is fin­ished. A notification to this effect is displayed. Telephony ¦Notes on telephony & WARNING Risk of distraction from operat­ing integrated communication equipment while the vehicle is in motion If you operate communication equipment inte­grated in the vehicle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. # Only operate this equipment when the traffic situation permits. # If you cannot be sure of this, stop the vehicle whilst paying attention to road and traffic conditions and operate the equipment with the vehicle stationary. & WARNING Risk of accident from operating mobile communication equipment while the vehicle is in motion Mobile communication devices distract the driver from the traffic situation. This can also cause the driver to lose control of the vehicle. # As a driver, only operate mobile commu­nication devices when the vehicle is sta­tionary. # As a vehicle occupant, use mobile com­munication devices only in the designa­ted area, e.g. in the rear passenger com­partment. You must observe the legal requirements for the country in which you are currently driving when operating the multimedia system and mobile com­munication equipment in the vehicle. & WARNING Risk of injury due to objects being stowed incorrectly If objects in the vehicle interior are stowed incorrectly, they can slide or be thrown around and hit vehicle occupants. In addition, cup holders, open stowage spaces and mobile phone receptacles cannot always retain all objects within. There is a risk of injury, particularly in the event of sudden braking or a sudden change in direction. # Always stow objects so that they cannot be thrown around in such situations. # Always make sure that objects do not protrude from stowage spaces, parcel nets or stowage nets. # Close the lockable stowage spaces before starting a journey. # Always stow and secure heavy, hard, pointed, sharp-edged, fragile or bulky objects in the trunk/cargo compart­ment. Observe the additional information on stowing mobile communications devices correctly: R Loading the vehicle (/ page 119) Bluetooth® connection: The menu view and the available functions in the telephone menu are in part dependent on the Bluetooth® profile of the connected mobile phone. If the mobile phone supports all the fol­lowing Bluetooth® profiles, the full range of fea­tures is available: R PBAP (Phone Book Access Profile) -The contacts on the mobile phone are shown automatically on the multimedia system. R MAP (Message Access Profile) -The mobile phone message functions can be used on the multimedia system. R HFP (hands-free profile) -Wireless telephony is available on the mul­timedia system. R SAP (SIM Access Profile) -The car telephone has access to the SIM card data and dials into the mobile phone network via the exterior antenna. Irrespective of this, Bluetooth® audio functionality can by used with any mobile radio unit. For information on the range of functions of the mobile radio unit to be connected, see the manu­facturer's operating instructions. Network connection: The following cases can lead to the call being dis­connected while the vehicle is in motion: R You switch into a transmission/reception sta­tion, in which no communication channel is free. R The SIM card used is not compatible with the network available R A mobile phone with "Twincard" is logged into the network with the second SIM card at the same time The multimedia system supports calls in HD Voice® for improved speech quality. A require­ment for this is that the mobile phone and the mobile phone network provider of the person you are calling support HD Voice®. Depending on the quality of the connection, the voice quality may fluctuate. Further information can be obtained from an ¦Telephone menu overview authorized Mercedes-Benz Center or at: https:// www.mercedes-benz.com/connect. 1 Bluetooth® device name of the currently con­nected mobile phone/of the mobile phone 2 Bluetooth® device name of the currently con­nected mobile phone/of the mobile phone (two phone mode) 3 Signal strength of the mobile phone network 4 Battery status of the connected mobile phone 5 Options 6 Messages 7 Calls up my devices 8 Numerical pad 9 Starts contact search ¦Telephony operating modes overview Depending on your equipment, the following tel­ ephony operating modes are available: R A mobile phone is connected to the multime­dia system via Bluetooth®. R Two mobile phones are connected with the multimedia system via Bluetooth® (two phone mode). -You can use all the functions of the multi­media system with both mobile phones. ¦Connecting a mobile phone Requirements: R Bluetooth® is activated on the mobile phone (see the manufacturer's operating instruc­tions). R Bluetooth® is activated on the multimedia sys­tem. Multimedia system: 4 © 5 Phone 5 Z 5 Devices 5 My Devices Searching for a mobile phone # Select Connect New Device. Connecting a mobile phone # Select a mobile phone. A code is displayed in the multimedia system and on the mobile phone. # If both codes match, confirm the code on the mobile phone. ¦Functions in the telephony menu In the telephony menu you have the following functions, for example: R Making calls, e.g.: -R Accepting a call -k End Call -Answering a call with a message -i Conference -Accepting or rejecting a waiting call Mercedes me calls R Managing contacts, e.g.: ¦Making a call via the overhead control panel -Downloading mobile phone contacts -Managing the format of a contact's name -Deleting favorites R Receiving and sending messages, e.g.: -Using the read-aloud function -Dictating a new message 1me button for service or information calls2SOS button cover3SOS button (emergency call system)Making a Mercedes me callMaking an emergency call # To open the cover of SOS button 2 , press it briefly. # Press and hold SOS button 3 for at least one second. If a Mercedes me call is active, an emergency call can still be triggered. This has priority over all other active calls. ¦Information about the Mercedes me call using the me button A call to the Mercedes-Benz Customer Center has been initiated via the me button in the overhead control panel or the multimedia system (/ page 329). You can access the desired service with the voice dialog system: R Accident and Breakdown Management R Mercedes-Benz Customer Center for general information about the vehicle You can find information on the following topics: R Activation of Mercedes me connect R Operating the vehicle R Nearest authorized Mercedes-Benz Center R Other products and services from Mercedes- Benz Data is transferred while connected to the Mercedes-Benz Customer Center (/ page 332). ¦Calling the Mercedes-Benz customer center using the multimedia system Requirements: R Access to a GSM network is available. R The contract partner's GSM network coverage is available in the respective region. R The vehicle must be switched on so that vehi­cle data can be transferred automatically. Multimedia system: 4 © 5 Phone 5 © # Call Mercedes me connect. After confirmation, the multimedia system sends the required vehicle data. The data transfer is shown on the central display. Then, you can select a service and be connected to a specialist at the Mercedes-Benz customer center. ¦Calling the Mercedes-Benz customer center after automatic accident or breakdown detection Requirements: R The vehicle has detected an accident or break­down situation. R The vehicle is stationary. R The hazard warning lights are switched on. % This function is not available in all countries. The vehicle can detect accident or breakdown sit­uations under certain circumstances. Requirements for collision detection in the con­text of accident management: R The vehicle is equipped with an anti-theft alarm system (ATA) (code 551). R The vehicle is equipped with the interior pro­tection (code 882). R The vehicle is equipped with the Anti-Theft Protection Package (code P54). R The collision detection service with theft notifi­cation has been activated on Mercedes me connect. If a collision is detected when the tow-away alarm is armed on a locked vehicle, you will receive a notification in the multimedia system when you switch the vehicle on. Find out at an authorized Mercedes-Benz Center if this functions is available in your country. In the event an accident or breakdown is detec­ted, the emergency guide shows safety notes in the multimedia system display. This may take a few seconds. % The availability of collision detection depends on the vehicle. After quitting the emergency guide display on the multimedia system, a prompt appears asking whether you would like to get support from the Mercedes-Benz customer center. # Select Call. R After your agreement, or if the Mercedes me connect service "Accident and Break­down Management" is active, the vehicle data is transferred automatically (/ page 333). R The Mercedes-Benz customer center takes your call and organizes the breakdown and accident assistance. You may be charged for these services. % Depending on the severity of the accident, an automatic emergency call can be initiated. This has priority over all other active calls (/ page 337). % In addition, if the Mercedes me connect service "Telediagnostics" is active, a similar prompt can appear after a delay in the event of a breakdown. If you are already in contact with the Mercedes-Benz customer center or have already received support, this prompt can be ignored or declined. % If you answer the prompt for support from the Mercedes-Benz customer center with Call Later, the message will be hidden and appear again later. The prompt triggered by the Mercedes me connect service "Telediagnostics", can either be confirmed or declined. After being declined, this will not be shown again. ¦Arranging a service appointment via a Mercedes me call If you have activated the maintenance manage­ment service, relevant vehicle data is transferred automatically to the Mercedes-Benz customer center. You will then receive individual recommen­dations regarding the maintenance of your vehi­cle. Regardless of whether you have consented to the maintenance management service, the multime­dia system reminds you after a certain amount of time that a service is due. A prompt appears ask­ing if you would like to make an appointment. # To arrange a service appointment: select Call. After your agreement, the vehicle data is transferred and the Mercedes-Benz customer center takes your preferred appointment date. The information is then sent to your desired service outlet. This will contact you to confirm the appoint­ment and if necessary consult about the details. % If you select Call Later after the service mes­sage appears, the message is hidden and reappears at a later time. ¦Data transferred during a Mercedes me call If you initiate a service call using Mercedes me, data is transferred to enable targeted advice and an efficient service. The following requirements must be fulfilled for the transfer of the data: R The vehicle is switched on. R The required data transfer technology is sup­ported by the mobile phone network provider. R The quality of the mobile connection is suffi­cient. Multi-stage transfer depends on the following fac­tors: R Reason for the initiation of the call R The available mobile phone transmission tech­nology. R The activated Mercedes me connect services. R The service selected in the voice control sys­tem. % The scope of the data transmitted depends on the vehicle model and equipment. For techni­cal reasons, not all data is available at all times. Data transfer if Mercedes me connect services are not activated If no Mercedes me connect services are activa­ted, the following data is transferred: R Vehicle identification number R Time of the call R Reason for the initiation of the call R Confirmation of the data protection prompt R Country indicator of the vehicle R Set language for the multimedia system R Telephone number of the communication plat­ form installed in the vehicle If a call is made for a service appointment via the service reminder, the following data is also trans­mitted: R Current mileage and maintenance data If a call is made after automatic accident or break­down detection using the multimedia system, the following data is also transmitted: R Current mileage and maintenance data R Current vehicle location If Accident and Breakdown Management is called via the voice control system, the following data can also be called up from the vehicle by the Mercedes-Benz customer center: R Current vehicle location Data processing The data transmitted within the scope of the call is deleted from the processing system after the call is finished, in so far as this data is not being used for other activated Mercedes me connect services. The incident-specific data is processed and stored in the Mercedes-Benz customer center and, if required to process the incident, forwarded to the service partner authorized by the Mercedes-Benz customer center. Take note of the data protection information on the Mercedes me Internet page https://www.mercedes.me or in the recorded message immediately after calling the Mercedes-Benz customer center. % The recorded message is not available in every country. Mercedes me connect ¦Information on Mercedes me connect Mercedes me connect consists of multiple serv­ices. You can use the following services via the multi­media system and the overhead control panel, for example: R Accident and Breakdown Management (me button or situation-dependent display in the multimedia system) R Mercedes-Benz Emergency Call System (auto­matic emergency call and SOS button) The Mercedes me connect Accident and Break­down Management and the Mercedes-Benz emer­gency call center are available to you around the clock. The me button and the SOS button can be found on the vehicle's overhead control panel (/ page 329). You can also call the Mercedes-Benz customer center using the multimedia system (/ page 330). Please note that Mercedes me connect is a Mercedes-Benz service. In emergencies, first call the national emergency services using the stand­ard national emergency service telephone num­bers. In emergencies, you can also use the Mercedes-Benz emergency call system (/ page 337). Please note the Mercedes me connect terms of use and the data protection information for Mercedes me connect. You can find these in your Mercedes me user account. Further information about Mercedes me connect services can be obtained in the Mercedes me Por­tal: https://me.secure.mercedes-benz.com ¦Information on Mercedes me connect Accident and Breakdown Management % Accident and Breakdown Management is not available in every country. Contact an author­ized Mercedes-Benz Center to find out whether this function is available in your coun­try. The Accident and Breakdown Management can include the following functions: R Supplement to the Mercedes-Benz emergency call system (/ page 337) If necessary, the contact person at the Mercedes-Benz emergency call center for­wards the call to Mercedes me connect Acci­ dent and Breakdown Management. Forward­ing the call is however not possible in all coun­tries. R Breakdown assistance by a technician on location and/or the towing away of the vehicle to the nearest authorized Mercedes-Benz Cen­ter You may be charged for these services. R Addition to the emergency guide after auto­ matic accident or breakdown detection (/ page 330) In the event of a breakdown or accident, fur­ ther vehicle data is sent which enables optimal support by the Mercedes-Benz customer cen­ter and the authorized service partner or breakdown assistance. R Addition to the Mercedes me connect service Telediagnostics With the Telediagnostics function, specific wear and failure reports are recorded by the service provider, in so far as these can be clearly interpreted and are available through the monitoring of components that are subject to diagnostics. If your vehicle detects a breakdown or threat of a breakdown, you may be prompted via the multimedia system to contact the Mercedes-Benz customer center for further help. This prompt in the multimedia system only appears when the vehicle is stationary. % These services are subject to technical restrictions such as the mobile phone cover­age, mobile network quality and the ability of the processing systems to interpret the trans­ferred data. In some circumstances, this can result in delays or the failure of the informa­tion to appear in the multimedia system. Please note that the service and breakdown call is a Mercedes-Benz service. In emergencies, be sure to contact the usual national emergency number first or use the Mercedes-Benz emer­gency call system (/ page 336). More information about Mercedes me connect services can be obtained in the Mercedes me Por­tal: https://me.secure.mercedes-benz.com ¦Data transferred during Mercedes me connect call services The data transferred during a Mercedes me con­nect call depends on: R The reason for initiation of the call R The service that is selected in the voice con­trol system R The activated Mercedes me connect services You can find out which data is transferred when using the services in the currently valid Mercedes me connect terms of use and the data protection information for Mercedes me connect. You can find these in your Mercedes me user account. Overview of the Mercedes me & Apps menu When you log in with a user account to the Mercedes me Portal, then services and offers from Mercedes-Benz will be available to you. For more information consult an authorized Mercedes-Benz Center or visit the Mercedes me portal: https://me.secure.mercedes-benz.com % Make sure you always keep the Mercedes me apps updated. You can call up the menu using Apps in the multi­ media system. In the Apps menu, the following options can be available: R Connecting the vehicle with the Mercedes me user account R Deleting a connection between a Mercedes me user account and the vehicle R Calling up the Mercedes me services R Calling up apps such as, In-Car Office or the web browser depending on availability Web browser overview 1 Previous website 2 Next website 3 Update 4 URL 5 Adds/removes bookmarks 6 Options 7 Settings % Under Ä you have the following options: R Tabs R Bookmarks & Browsing History R Reading Mode R Share Link R Share Content R Request Mobile Website % Websites cannot be shown while the vehicle is in motion. Overview of Smartphone Integration With Smartphone Integration, you can use certain functions on your mobile phone via the multime­dia system display. Only one mobile phone at a time can be connec­ted via Smartphone Integration to the multimedia system. Also for use with two phone mode with Smartphone Integration, only one additional mobile phone can be connected using Bluetooth® with the multimedia system. The full range of functions for Smartphone Inte­gration is only possible with an Internet connec­tion. The appropriate application must be down­loaded on the mobile phone to use Smartphone Integration. The mobile phone must be switched on and connected to the multimedia system via the USB port using a suitable cable. Apps for Smartphone Integration: R Apple CarPlay® (wireless connection via Blue­tooth® also possible) R Android Auto (wireless connection via Blue­tooth® also possible) % For safety reasons, the first activation of Apple CarPlay® or Android Auto on the multi­media system must be carried out when the vehicle is stationary with the parking brake. You can start Smartphone Integration using the My Devices menu. You can end Smartphone Integration via the My Devices or by disconnecting the connecting cable between the mobile phone and multimedia sys­tem. % Mercedes-Benz recommends disconnecting the connection via the device manager or the connecting cable only when the vehicle is sta­tionary. Overview of transferred vehicle data When using Smartphone Integration, certain vehi­cle data is transferred to the mobile phone. This enables you to get the best out of selected mobile phone services. Vehicle data is not directly acces­sible. The following system information is transmitted: R Software release of the multimedia system R System ID (anonymized) The transfer of this data is used to optimize com­munication between the vehicle and the mobile phone. To do this, and to assign several vehicles to the mobile phone, a vehicle identifier is randomly gen­erated. This has no connection to the vehicle identifica­tion number (VIN) and is deleted when the multi­media system is reset (/ page 307). The following driving status data is transmitted: R Transmission position engaged R Distinction between parked, standstill, rolling and driving R Day/night mode of the driver's display R Drive type The transfer of this data is used to alter how con­tent is displayed to correspond to the driving sit­uation. The following position data is transmitted: R Coordinates R Speed R Compass direction R Acceleration direction The mobile phone uses this data to improve the accuracy of navigation, for example, when driving through a tunnel. Information on the Mercedes-Benz emergency call system Your vehicle is equipped with the Mercedes-Benz emergency call system (“eCall”). This feature can help save lives in the event of an accident. eCall in no way replaces assistance provided from dial­ing 911. Mercedes-Benz eCall only functions in areas where mobile phone coverage is available from the wireless service providers. Insufficient net­work coverage from the wireless service providers may result in an emergency call not being trans­mitted. eCall is a standard feature in your Mercedes-Benz vehicle. In order to function as intended, the sys­tem relies on the transmission of data detailed in the Transmitted Data section that follows. To disable eCall, a customer must visit an author­ized Mercedes-Benz Service department to deac­tivate the vehicle’s communication module. Deactivation of this module prevents the activa­tion of any and all Mercedes me connect serv­ices. After the deactivation of eCall, automatic emergency call and manual emergency call will not be available. The vehicle must be switched on before an auto­matic emergency call can be made. % eCall is activated at the factory. % eCall can be deactivated by an authorized Mercedes-Benz dealer. Please note that in the event ownership of the vehicle is transferred to another owner in its deactivated state, eCall will remain deactivated unless the new owner visits an authorized Mercedes-Benz dealership to reactivate the system. Overview of the Mercedes-Benz emergency call system eCall can help to reduce the time between an accident and the arrival of emergency services at the site of the accident. It helps locate an acci­dent site in places that are difficult to access. However, even if a vehicle is equipped with eCall, this does not mean the system is ON. As such, eCall does not replace dialing 911 in the event of an accident. An emergency call can be made automatically or manually. Only make emergency calls if you or others are in need of rescue. Do not make an emergency call in the event of a breakdown or a similar situation. Messages on the display SOS NOT READY: the vehicle is not on or eCall not available. During an active emergency call, appears in the display. You can find more information on the regional availability of eCall at: https://www.mercedes­benz-mobile.com/extra/ecall/ % If there is a malfunction of the emergency call system, the loudspeakers, microphone, air bag or the SOS button, for example, are faulty. You can recognize a malfunction in the emer­gency call system by the following displays: R A corresponding message will also appear in the driver's display. R The SOS button lights up red continuously. Triggering an automatic Mercedes-Benz emer­ gency call Requirements: R The vehicle is switched on. The Mercedes-Benz emergency call system trig­gers an emergency call automatically in the fol­lowing cases: R After activation of the restraint systems such as air bags or Emergency Tensioning Devices after an accident R After an automatically initiated emergency stop by Active Emergency Stop Assist The emergency call has been made: R A voice connection is made to the Mercedes-Benz emergency call center. R A message with accident data is transmitted to the Mercedes-Benz emergency call center. The Mercedes-Benz emergency call center can transmit the vehicle position data to one of the emergency call centers. The SOS button in the overhead control panel flashes until the emergency call is finished. It is not possible to immediately end an automatic emergency call. If no connection can be made to the emergency services either, a corresponding message appears in the media display. # Dial the local emergency number on your mobile phone. If an emergency call has been initiated: R Remain in the vehicle if the road and traffic conditions permit you to do so until a voice connection is established with the emergency call center operator. R Based on the call, the operator decides whether it is necessary to call rescue teams and/or the police to the accident site. R If no vehicle occupant answers, an ambulance is sent to the vehicle immediately. Triggering a manual Mercedes-Benz emergency call # To use the SOS button in the overhead con­trol panel: press the SOS button at least one second long (/ page 329). or # To use voice control: use the voice commands of the MBUX Voice Assistant. The emergency call has been made: R A voice connection is made to the Mercedes-Benz emergency call center. R A message with accident data is transmitted to the Mercedes-Benz emergency call center. The Mercedes-Benz emergency call center can transmit the vehicle position data to one of the emergency call centers. R Remain in the vehicle if the road and traffic conditions permit you to do so until a voice connection is established with the emergency call center operator. R Based on the call, the operator decides whether it is necessary to call rescue teams and/or the police to the accident site. If no connection can be made to the emergency services, a corresponding message appears in the central display. # Dial the local emergency number on your mobile phone. Ending an unintentionally triggered manual Mercedes-Benz emergency call # Select ~ on the multifunction steering wheel. Depress button for several seconds. Data transfer of the Mercedes-Benz emergency call system In the event of an automatic or manual emergency call the following data is transmitted, for example: R Vehicle's GPS position data R GPS position data on the route (a few hundred meters before the incident) R Direction of travel R Vehicle identification number R Vehicle drive type R Number of people determined to be in the vehicle R Whether Mercedes me connect is available or not R Language setting on the multimedia system Data transmitted is vehicle information. For any questions about the collection, use and sharing of the eCall system data, please contact MBUSA's Customer Assistance Center at 800-FOR-MERC. For Canada, please contact MBC's Customer Assistance Center at 1-800-387-0100. Customer requests for covered information should be submitted via the same channels. For accident clarification purposes, the following measures can be taken up to an hour after the emergency call has been initiated: R The current vehicle position can be deter­mined. R A voice connection to the vehicle occupants can be established. Overview of functions in the sound menu find out which sound system is installed in your vehicle in the Digital Operator's Manual. Standard sound system The following functions are available: R Equalizer -Treble, mid-range and bass R Balance and fader R Volume -Automatic adjustment R Whether the emergency call was initiated The setting options and functions available manually or automatically depend on the sound system installed. You can R Time of the accident Function of the ASSYST PLUS service interval dis­ play The ASSYST PLUS service interval display on the driver's display informs you of the next regular service due date. Depending on the operating conditions of the vehicle, the remaining time or distance until the next service due date will be displayed. You can hide this service display using the G back button on the steering wheel. You can obtain information concerning the servic­ing of your vehicle from a qualified specialist workshop, e.g. an authorized Mercedes-Benz Cen­ter (/ page 34). Displaying the service due date Driver's display: 4 Service The next service due date is displayed. # To exit the display: press the back button G on the steering wheel. Bear in mind the following related topic: R Operating the driver's display (/ page 281). Information on regular maintenance work * NOTE Premature wear through failure to observe service due dates Maintenance work which is not carried out at the right time or incompletely can lead to increased wear and damage to the vehicle. # Adhere to the prescribed service inter­vals. # Always have the prescribed maintenance work carried out at a qualified specialist workshop. * NOTE Irreparable damage to the high-volt­age battery due to maintenance work not being carried out The high-voltage battery is subject to wear. Maintenance work which is not carried out in time can lead to irreparable damage to the high-voltage battery. # Always observe the warning messages about the high-voltage battery and immediately consult a qualified specialist workshop. # Have the necessary maintenance work on the high-voltage battery carried out at a qualified specialist workshop. Notes on special service requirements The prescribed service interval is based on nor­mal operation of the vehicle. Have the mainte­nance work carried out more often than prescri­bed if operating conditions are difficult or the vehicle is subject to increased stress. This is the case for frequent operation in mountainous ter­rain or on poor road surfaces, for example. In these or similar operating conditions, have the interior air filter changed more frequently. Check the tires more frequently if the vehicle is operated under increased stress. Further information can be obtained at a qualified specialist workshop. The ASSYST PLUS service interval display is only an aid. It is the responsibility of the driver of the vehicle to have maintenance work carried out more often than prescribed due to actual operat­ing conditions and/or stresses. Battery disconnection periods The ASSYST PLUS service interval display can cal­culate the service due date only when the battery is connected. # Display and note down the service due date on the driver display before disconnecting the battery (/ page 340). Notes about Maintenance Management If the Maintenance Management service is activa­ted, relevant data is automatically transferred to the Mercedes-Benz customer center. The customer center transmits the data to the service partner that you have entered on the Mercedes me website at: http:// www.mercedes.me. You will then receive individ­ual recommendations regarding the maintenance of your vehicle. % The calculation of the optimal transmission time of the maintenance request to the service partner is subject to technical limita­tions that may cause the maintenance recom­mendation to be perceived as too early or too late or not to be made at all. In this case, you can conveniently arrange a maintenance appointment with the customer center via the maintenance reminder in the multimedia sys­tem. % Maintenance Management and the mainte­nance reminder in the multimedia system are not available in every country. Contact an authorized Mercedes-Benz Center to find out whether this function is available in your coun­try. Data transferred when using Maintenance Man­ agement When the service is activated, relevant data is automatically transferred to determine the required scope of maintenance as well as mal­function detection and malfunction rectification. Details on data transfer can be found in the data protection information for the Mercedes me con­nect services. These can be found at: http:// www.mercedes.me under "My Mercedes me account", "Terms of use". % Maintenance Management and the mainte­nance reminder in the multimedia system are not available in every country. Notes about Telediagnosis % This service is not available in all countries. The vehicle can detect if certain wear parts need to be replaced or if malfunctions have occurred in vehicle systems. If the Telediagnosis service is activated, relevant data is automatically transmit­ted to the manufacturer. If fault conditions are detected by the vehicle system self-diagnosis, the system transmits recommendations for action to the Mercedes-Benz customer center depending on the fault detected. The customer center trans­mits the data to the service partner that you have entered on the Mercedes me website at: http:// www.mercedes.me. For selected faults, the notification that a mal­function has been detected may appear in the multimedia system with a request to contact the Mercedes-Benz customer center. From this mes­sage, a call can be made directly to the customer center for assistance. % The transmission of a notification to the multi­media system depends on the country, vehi­cle model and equipment and requires a fast data connection, over which the service pro­vider has no influence. % Reliable fault detection is subject to technical limitations. Therefore, only a limited selection of faults can be detected and recommenda­tions for action transmitted to the customer center and the service partners. Mercedes-Benz AG is continuously working on the expansion of this service. The fault detection depends on the country, vehicle model and equipment. Data transferred when using Telediagnostics When the service is activated, relevant data is automatically transferred to determine the next required scope of maintenance as well as mal­function detection and malfunction rectification. Details on data transfer can be found in the data protection information for the Mercedes me con­nect services. These can be found at: http:// www.mercedes.me under "My Mercedes me account", "Terms of use". % The scope of the data transmitted depends on the vehicle model and equipment. For techni­cal reasons, not all data is available at all times. Notes on the hood Only the specialist personnel at a qualified spe­cialist workshop should open the hood. Access by the customer is not permitted. To open the hood, consult a qualified specialist workshop. & DANGER Risk of fatal injuries when carry­ing out maintenance work during the charging process During the charging process, the high-voltage on-board electrical system is under high volt­age. # Do not perform any maintenance work during the charging process. & WARNING Risk of accident due to driving with the hood unlocked The hood may open and block your view. # Never release the hood when driving. # Before every trip, ensure that the hood is locked. & WARNING Risk of accident and injury when opening and closing the hood The hood may suddenly drop into the end position. There is a risk of injury for anyone in the hood's range of movement. # Do not open or close the hood if there is a person in the hood's range of move­ment. & WARNING Risk of injury due to overheated vehicle If you open the hood in the event of an over­heated vehicle or fire in the engine compart­ment, the following situations may occur: R You may come into contact with hot gases. R You may come into contact with other escaping hot operating fluids. # In the event of overheating or fire in the engine compartment, keep the hood closed and call the fire service. # Allow the overheated vehicle to cool down first if you need to open the hood. & WARNING Risk of injury due to moving parts Components in the engine compartment may continue to run or start unexpectedly even when the drive system is switched off. Observe the following if you must open the hood: # Switch off the vehicle. # Never touch the danger zones surround­ing moving components, e.g. the rotation area of the fan. # Remove jewelery and watches. # Keep items of clothing and hair away from moving parts. & WARNING Risk of injury from using the windshield wipers when the hood is open If the windshield wipers start moving when the hood is open, you could be trapped by the wiper linkage. # Always switch off the windshield wipers and the vehicle first if you need to open the hood. Notes on the coolant level Checking or refilling coolant should be carried out only by the trained personnel of a qualified spe­cialist workshop. Access by the customer is not permitted. To check or refill coolant, use a qualified specialist workshop. & WARNING Risk of scalding from hot cool­ant You may scald yourself if you open the cap when the drive system is at normal operating temperature. # Let the vehicle cool down before opening the cap. # When opening the cap, wear protective gloves and safety glasses. # Open the cap slowly to release pressure. Keeping the air/water duct free # Keep the area between the hood and the windshield free of deposits, e.g. ice, snow or leaves. & WARNING Risk of fire and injury from windshield washer concentrate Windshield washer concentrate is highly flam­mable. # Avoid fire, open flames, smoking and the creation of sparks when using windshield washer concentrate. Requirements: R The vehicle is unlocked. # Press on the rear area of washer fluid filler flap 1. Washer fluid filler flap 1 will open. # Add washer fluid. # Close washer fluid filler flap 1. % Further information about the windshield washer fluid (/ page 405) Information on washing the vehicle in a car wash & WARNING Risk of accident due to reduced braking effect after washing the vehicle The braking effect is reduced after washing the vehicle. # After the vehicle has been washed, brake carefully while paying attention to the traffic conditions until the braking effect has been fully restored. * NOTE Damage caused by automatic brak­ing If one of the following functions is activated, the vehicle brakes automatically in certain sit­uations: R Active Brake Assist R Active Distance Assist DISTRONIC R HOLD function R Active Parking Assist To avoid damage to the vehicle, deactivate these systems in the following or similar situa­tions: # During towing. # In a car wash. * NOTE Damage due to unsuitable car wash # Before driving into a car wash make sure that the car wash is suitable for the vehi­cle dimensions. # Ensure there is sufficient ground clear­ance between the underbody and the guide rails of the car wash. # Ensure that the clearance width of the car wash, in particular the width of the guide rails, is sufficient. To avoid damage to your vehicle when using a car wash, ensure the following beforehand: R Active Distance Assist DISTRONIC is deactiva­ted. R The HOLD function is switched off. R The 360° camera or the reversing camera is switched off. R The vehicle is locked and the door handles are retracted. R The side windows and sliding sunroof are com­ pletely closed. R The outside mirrors are folded in. R The blower for the ventilation and heating is switched off. R The windshield wiper switch is in position g. R The key is at a minimum distance of 20 ft (6 m) away from the vehicle. Otherwise, the trunk lid or a door could open unintentionally. R For car washes with a conveyor system: -Neutral i is engaged. -The vehicle is locked from the inside. % If, after the car wash, you remove the wax from the windshield and wiper rubbers, this will prevent smearing and reduce wiper noise. Automatic car wash mode In car wash mode, the vehicle is prepared for driv­ing into an automatic car wash. Car wash mode can be activated at a speed of up to 12 mph (20 km/h) (/ page 346). When car wash mode is activated, the Automatic Car Wash Mode Active message will appear on the driver's display. The following adjustments will be made: R To prevent the windshield washer system from starting up automatically, the rain sensor will be deactivated. R The comfort doors will be deactivated. R The servo opening system for the door han­dles will be deactivated. R Parking Assist PARKTRONIC will be deactiva­ted. R Vehicles with 360° camera: the front image will be activated after approximately eight sec­onds. R Vehicles with HANDS-FREE ACCESS: kick rec­ognition will be deactivated. If one of the settings cannot be selected, this will be shown with % next to the respective set­ting. Pressing Switch Off will end car wash mode. Above a speed of 12 mph (20 km/h) car wash mode will be deactivated automatically. You can also switch off the car wash mode via the MBUX multimedia system (/ page 346). The following settings will be reset when car wash mode is deactivated: R The rain sensor will be activated. R The comfort doors will be activated. R The servo opening system for the door han­ dles will be activated. R Parking Assist PARKTRONIC will be reset to the previously selected setting. R Vehicles with 360° camera: the front image will be deactivated at speeds above 11 mph (18 km/h). R Vehicles with HANDS-FREE ACCESS: kick detection will be activated. Activating/deactivating automatic car wash mode Requirements: R The vehicle is stationary. R The vehicle is switched on. Multimedia system: 4 © 5 Settings 5 Vehicle 5 Driving Activating automatic car wash mode # Select Automatic Car Wash Mode. # Select Activate. If one of the settings cannot be selected, this is shown by a % next to the respective setting. % For an overview of the settings made when activating automatic car wash mode (/ page 344). Deactivating automatic car wash mode # Select Deactivate. The automatic car wash settings are reset. % The automatic car wash mode is automatically deactivated as soon as a speed of 12 mph (20 km/h) is exceeded. Information on using a power washer & WARNING Risk of an accident when using power washers with round-spray nozzles The water jet can cause externally invisible damage. Components damaged in this way may unex­pectedly fail. # Do not use a power washer with round-spray nozzles. # Have damaged tires or chassis parts replaced immediately. To avoid damage to your vehicle, observe the fol­lowing when using a power washer: R The key is at a minimum distance of 10 ft (3 m) away from the vehicle. Otherwise the trunk lid or a door could open unintentionally. R Maintain a distance of at least 11.8 in (30 cm) to the vehicle. R Vehicles with decorative foil: Parts of your vehicle are covered with a decorative foil. Maintain a distance of at least 27.6 in (70 cm) between the foil-covered parts of the vehicle and the nozzle of the power washer. Move the power washer nozzle around while cleaning. The water temperature of the power washer must not exceed 140 °F (60 °C). R Observe the information on the correct dis­tance in the equipment manufacturer's opera­tor manual. R Do not direct the nozzle of the power washer directly at sensitive parts, e.g. tires, gaps, electrical component parts, batteries, lighting and louvers. Washing the vehicle by hand Observe the relevant legal requirements (e.g. in some countries, washing by hand is permitted only in specially designated wash bays). # Use a mild cleaning agent (e.g. car shampoo). # Wash the vehicle with lukewarm water using a soft car sponge. When doing so, do not expose the vehicle to direct sunlight. # Carefully hose the vehicle off with water and dry using a chamois. % Observe the notes on the care of car parts (/ page 348). Notes on paintwork/matt finish paintwork care To avoid damaging the paintwork and interfering with the driving assistance systems, please observe the following notes: Paint R Insect remains: soak with insect remover and rinse off the treated areas afterwards. R Bird droppings: soak with water and rinse off afterwards. R Tree resin, oils, fuels and greases: remove by rubbing gently with a cloth soaked in petro­leum ether or lighter fluid. R Coolant and brake fluid: remove with a damp cloth and clean water. R Tar stains: use tar remover. R Wax: use silicone remover. R Do not attach stickers, films or similar materi­als. Have film attached to the bumper only at a qualified specialist workshop. R Remove dirt immediately, where possible. Matt finish R Use only care products approved for Mercedes-Benz. R Do not attach stickers, films or similar materi­als. Have film attached to the bumper only at a qualified specialist workshop. R Do not polish the vehicle and alloy wheels. R Use only car washes that correspond to the latest engineering standards. R Do not use any car wash program with a final hot wax treatment. R Do not use paint cleaners, buffing or polishing products or gloss preservers, e.g. wax. In the event of paintwork damage: R Always have paintwork repairs carried out at a qualified specialist workshop. R Make sure the radar sensors function (/ page 212). Notes on cleaning decorative films Observe the "Notes on paintwork/matte finish paintwork care" (/ page 347). They also apply to matte decorative films. Observe the notes on cleaning decorative films to avoid damage. Cleaning R For cleaning, use plenty of water and a mild cleaning agent without additives or abrasive substances (e.g. a car shampoo approved for Mercedes-Benz). R Remove dirt as soon as possible. Avoid rub­bing too hard in order not to damage the dec­orative film irreparably. R If there is dirt on the finish or if the decorative film is dull: use the paint cleaner recommen­ded and approved for Mercedes-Benz. R Insect remains: soak with insect remover and rinse off the treated areas afterwards. R Bird droppings: soak with water and rinse off afterwards. R To prevent water stains, dry a film-wrapped vehicle with a soft, absorbent cloth after every car wash. Avoiding damage to the decorative film R The service life and color of decorative films are impaired by: -Sunlight -Temperature (e.g. hot air blower) -Weather conditions -Stone chippings and dirt -Chemical cleaning agents -Oily products R Do not use polish on matte decorative film. Polishing will have the effect of shining the film-wrapped surface. R Do not treat matte or structured decorative films with wax. Permanent stains may occur. Scratches, corrosive deposits, areas affected by corrosion and damage caused by incorrect care cannot always be completely repaired. In this case, contact a qualified specialist workshop. You can obtain more information on care and cleaning agents from the manufacturer. In the case of film-wrapped surfaces, visual differ­ences may occur between the surfaces that were not protected by a decorative film after a decora­tive film has been removed. % Have work or repairs to decorative films car­ried out at a qualified specialist workshop (e.g. at an authorized Mercedes-Benz Center). Notes on care of car parts & WARNING Risk of entrapment if the wind­shield wipers are switched on while the windshield is being cleaned If the windshield wipers are set in motion while you are cleaning the windshield or wiper blades, you can be trapped by the wiper arm. # Always switch off the windshield wipers and the drive system before cleaning the windshield or wiper blades. To avoid damage to the vehicle, observe the notes on cleaning and care of the following car parts: Wheels and rims R Use water and acid-free alloy wheel cleaners. R Do not use acidic alloy wheel cleaners to remove brake dust. This could damage wheel bolts and brake components. R To avoid corrosion of the brake disks and brakepads, drive the vehicle for a few minutes after cleaning before parking it. The brake disks and brakepads will warm up and dry out. Windows R Clean the windows inside and outside with a damp cloth and with a cleaning agent recom­mended for Mercedes-Benz. R Do not use dry cloths or abrasive or solvent-based cleaning agents to clean the insides of windows. % After changing the wiper blades or treating the vehicle with wax, clean the windshield thoroughly with cleaning agents recommen­ded for Mercedes-Benz. Failure to observe the application instructions may result in damage, smear marks or glare spots. % Remove external fogging or dirt on the wind­shield in front of the multifunction camera. Otherwise, driving systems and driving safety systems may be impaired or unavailable (/ page 212). Wiper blades R Move the wiper arms into the replacement position (/ page 149). R With the wiper arms folded out, clean the wiper blades with a damp cloth. % Make sure that the wiper blades are coated. The coating may leave residue on a cloth. Do not rub the wiper blades excessively or clean them too often. Exterior lighting R Clean the lenses with a wet sponge and mild cleaning agent (e.g. car shampoo). R Use only cleaning agents or cleaning cloths that are suitable for plastic lenses. Vehicle socket (high-voltage battery) R Use clean water and a soft cloth to clean the vehicle socket. R Do not use power washers or cleaning agents such as soap. Sensors R Clean the sensors in the front and rear bump­ers with a soft cloth and car shampoo (/ page 212). R When using a power washer, maintain a mini­mum distance of 11.8 in (30 cm). Rear view camera and 360° camera R Open the camera cover with the multimedia system (/ page 260). R Use clean water and a soft cloth to clean the camera lens. R Do not use a power washer. Notes on care of the interior & WARNING Risk of injury from plastic parts breaking off after the use of solvent-based care products Care and cleaning products containing sol­vents can cause surfaces in the cockpit to become porous. When the airbags are deployed, plastic parts may break away. # Do not use any care or cleaning products containing solvents to clean the cockpit. & WARNING Risk of injury or fatal injuries from bleached seat belts Bleaching or dyeing seat belts can severely weaken them. This can, for example, cause seat belts to tear or fail in an accident. # Never bleach or dye seat belts. To avoid damage to the vehicle, observe the fol­lowing notes on cleaning and care: Seat belts R Clean with lukewarm soapy water. R Do not use chemical cleaning agents. R Do not dry by heating them to over 176°F (80°C) or exposing them to direct sunlight. Display R Switch off the display and let it cool down. R Clean the surface carefully with a microfiber cloth and a suitable display care product (TFT­LCD). R Do not use any other agents. Head-up display R Clean with a soft, non-static, lint-free cloth. R Do not use cleaning agents. Plastic trim R Clean with a damp microfiber cloth. R For heavy soiling: use a cleaning agent recom­mended for Mercedes-Benz. R Do not attach stickers, films or similar materi­als. R Do not allow cosmetics, insect repellent or sun cream to come into contact with the plas­tic trim. Real wood and trim elements R Clean with a microfiber cloth. R Black piano-lacquer look: clean with a damp cloth and soapy water. R For heavy soiling: use a cleaning agent recom­mended for Mercedes-Benz. R Do not use solvent-based cleaning agents, pol­ishes or waxes. Roof lining R Clean with a brush or dry shampoo. Carpet R Use a carpet and textile cleaning agent recom­mended for Mercedes-Benz. Steering wheel made of genuine leather or DINA­MICA * NOTE Damage caused by wrong cleaners # Do not use solvent-based cleaning agents such as tar remover or wheel cleaner; neither should you use polishes or waxes. Otherwise you may damage the finish. R Clean with a damp cloth and 1% soapy water solution and then wipe with a dry cloth. R For heavy soiling: use a cleaning agent recom­mended for Mercedes-Benz. R Leather care: use a leather care agent that has been recommended for Mercedes-Benz. R Do not allow the leather to become too damp. R Do not use a microfiber cloth. % Leather is a natural product. It exhibits natural surface properties such as differences in structure, marks caused by growth and injury or subtle color differences. These surface properties are characteristics of leather and not material faults. What's more, leather is subject to a natural aging process during which the surface properties change. Genuine leather seat covers R Vacuum up dirt such as crumbs or dust and then clean the seat covers with a damp cotton cloth and wipe down with a dry cloth. Regu­larly clean the seat covers. R For heavy soiling: use a leather care agent rec­ommended for Mercedes-Benz aftercare. R Leather care: use a leather care agent that has been recommended for Mercedes-Benz. R Do not use a microfiber cloth. R Do not allow the leather to become too damp. R Do not use oil-based cleaning and care prod­ucts. % Leather is a natural product. It exhibits natural surface properties such as differences in structure, marks caused by growth and injury or subtle color differences. These surface properties are characteristics of leather and not material faults. What's more, leather is subject to a natural aging process during which the surface properties change. Regular cleaning and care of the leather reduces soiling, wear marks and aging dam­age and thus significantly extends its life span. Clothing that can leave stains (e.g. jeans) may discolor the leather. DINAMICA seat covers R Clean with a damp cloth. R Do not use a microfiber cloth. Imitation leather seat covers R Vacuum up dirt such as crumbs or dust and then use a damp cotton cloth and a 1% soap solution to clean the entire seat cover. Do not spot clean. R Use cleaning and care products recommen­ded for Mercedes-Benz. R Do not use a microfiber cloth. R Do not use oil-based cleaning and care prod­ucts. Fabric seat covers R Vacuum up dirt such as crumbs or dust and then use a damp microfiber cloth and a 1% soap solution to clean the entire seat cover. Do not spot clean. R Use cleaning and care products recommen­ded for Mercedes-Benz. R Do not use oil-based cleaning and care prod­ucts. Removing the safety vest The safety vests are located in stowage spaces in the front door. # Take the safety vest 1 bag out of stowage space. # Open the safety vest 1 bag and pull out the safety vest. % Safety vests can also be stored in the rear door stowage spaces. 1 Maximum number of washes 2 Maximum wash temperature 3 Do not bleach 4 Do not iron 5 Do not tumble dry 6 Do not dry clean 7 This is a class 2 vest The requirements defined by the legal standard will be fulfilled only in the following cases: R the safety vest is the correct size R the safety vest is fully fastened while being worn Replace the safety vest in the following cases: R the reflective strips are damaged or dirt on the reflective strips can no longer be removed R the maximum number of washes is exceeded R the fluorescence has faded Warning triangle ¦Removing the warning triangle #Remove warning triangle 1.¦Setting up the warning triangle First-aid kit (soft sided) First-aid kit (soft sided) 1 is located on the right-hand side of the trunk in the as-delivered condi-tion.# Fold side reflectors 1 upwards to form a tri­angle and attach at the top using upper press-stud 2. # Fold legs 3 down and out to the side. Notes on flat tires & WARNING Risk of accident due to a flat tire A flat tire severely affects the driving charac­teristics as well as the steering and braking of the vehicle. Tires without run-flat characteristics: # Do not drive with a flat tire. # Change the flat tire immediately with an emergency spare wheel or spare wheel. Alternatively, consult a qualified special­ist workshop. Tires with run-flat characteristics: # Observe the information and warning notes on MOExtended tires (run-flat tires). In the event of a flat tire, the following options are available depending on your vehicle's equipment: R Vehicles with MOExtended tires: it is possible to continue the journey for a short period of time. Make sure you observe the notes on MOExtended tires (run-flat tire) (/ page 354). R Vehicles with a TIREFIT kit: you can repair the tire so that it is possible to continue the jour­ney for a short period of time. To do this, use the TIREFIT kit (/ page 355). R Vehicles with Mercedes me connect: you can make a call for breakdown assistance via the overhead control panel in the case of a break­down (/ page 329). R All vehicles: change the wheel (/ page 392). % The emergency spare wheel is available only in certain countries. Notes on MOExtended tires (run-flat tires) & WARNING Risk of accident when driving in limp-home mode When driving in emergency mode the handling characteristics are impaired. # Do not exceed the specified maximum speed of the MOExtended tires. # Avoid any abrupt steering and driving maneuvers as well as driving over obsta­cles (curbs, pot holes, off-road). This applies, in particular, to a loaded vehicle. # Stop driving in the emergency mode if you notice: R Banging noise R Vehicle vibration R Smoke which smells like rubber R Continuous ESP® intervention R Cracks in the tire side walls # After driving in emergency mode, have the rims checked by a qualified specialist workshop with regard to their further use. # The defective tire must be replaced in every case. With MOExtended tires (run-flat tires), you can continue to drive your vehicle even if there is a total loss of pressure in one or more tires. How­ever, the affected tire must not show signs of clearly visible damage. You can recognize MOExtended tires by the MOExtended marking which appears on the side wall of the tire. Vehicles with a tire pressure monitoring system: MOExtended tires may only be used in conjunc­tion with an activated tire pressure monitoring system. If a pressure loss warning message appears in the driver's display, proceed as follows: R Check the tire for damage. R If driving on, observe the following notes. Driving distance possible in emergency mode after the pressure loss warning: Load condition Driving distance possi­ ble in emergency mode Partially laden 50 miles (80 km) Fully laden 19 miles (30 km) The driving distance possible in emergency mode may vary depending on the driving style. Observe the maximum permissible speed of 50 mph (80 km/h). If a tire has gone flat and cannot be replaced with an MOExtended tire, you can use a standard tire as a temporary measure. TIREFIT kit storage location The TIREFIT kit is located under the trunk floor. 1 Tire inflation compressor 2 Tire sealant bottle Depending on the model, the TIREFIT kit may also be located in other places under the trunk floor. Using the TIREFIT kit Requirements: R Tire sealant bottle and tire inflator compressor are ready for use (/ page 354). R TIREFIT sticker is present. R Gloves are present. You can use TIREFIT tire sealant to seal perfora­tion damage of up to 0.16 in (4 mm), particularly in the tire contact surface. You can use TIREFIT in outside temperatures down to -4 °F (-20 °C). & WARNING Risk of accident when using tire sealant The tire sealant may be unable to seal the tire properly, especially in the following cases: R There are large cuts or punctures in the tire (larger than damage previously men­tioned) R The wheel rims have been damaged R After journeys with very low tire pressure or with flat tires # Do not continue driving. # Consult a qualified specialist workshop. & WARNING Risk of injury and poisoning from tire sealant The tire sealant is harmful and causes irrita­tion. Do not allow it to come into contact with the skin, eyes or clothing, and do not swallow it. Do not inhale tire sealant fumes. Keep the tire sealant away from children. If you come into contact with the tire sealant, observe the following: # Rinse off the tire sealant from your skin immediately using water. # If tire sealant gets into your eyes, thor­oughly rinse out the eyes using clean water. # If tire sealant has been swallowed, imme­diately rinse out the mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention immediately. # Change out of any clothes contaminated with tire sealant immediately. # If allergic reactions occur, seek medical attention immediately. * NOTE Overheating due to the tire inflation compressor running too long # Do not run the tire inflation compressor for longer than ten minutes without inter­ruption. Comply with the manufacturer's safety notes on the sticker regarding the tire inflation compressor. Have the tire sealant bottle replaced in a qualified specialist workshop every five years. # Do not remove any foreign objects that have entered the tire. # Affix part 1 of the TIREFIT sticker to the instrument cluster within the driver's field of vision. # Affix part 2 of the TIREFIT sticker near the valve on the wheel with the defective tire. #Pull the plug 4 with the cable and hose 5out of the tire inflation compressor housing.# Push the plug of hose 5 into flange 6 of tire sealant bottle 1 until the plug engages. # Place the tire sealant bottle 1 head down­wards into recess 2 of the tire inflation com­pressor. # Remove the valve cap from valve 7 on the faulty tire. # Screw the filling hose 8 onto the valve 7. # Insert plug 4 into a 12-V-socket in your vehi­cle (/ page 131). # Switch on the vehicle. # Switch on the tire inflation compressor using the On/Off switch 3. The tire is inflated. First, tire sealant is pum­ped into the tire. The pressure may briefly rise to approximately 500 kPa (5.0 bar/73 psi). Do not switch off the tire inflation compressor during this phase! # Allow the tire inflation compressor to run for a maximum of ten minutes. The tire should then have attained a tire pres­sure of at least 200 kPa (2.0 bar/29 psi). If tire sealant leaks out, make sure you clean the affected area as quickly as possible. It is prefera­ble to use clean water. If you get tire sealant on your clothing, have it cleaned as soon as possible with perchloroethy­lene. If, after ten minutes, a tire pressure of 200 kPa (2.0 bar/29 psi) has not been attained: # Switch off the tire inflation compressor. # Unscrew the filling hose from the valve of the defective tire. Please note that tire sealant may leak out when you unscrew the filling hose. # Drive forwards or in reverse very slowly for approximately 33 ft (10 m). # Pump up the tire again. After a maximum of ten minutes, the tire pres­sure must be at least 200 kPa (2.0 bar/ 29 psi). & WARNING Risk of accident due to the specified tire pressure not being achieved If the specified tire pressure is not achieved after the specified time, the tire is too badly damaged. The tire sealant cannot repair the tire in this instance. The braking characteristics as well as the driv­ing characteristics may be greatly impaired. # Do not continue driving. # Consult a qualified specialist workshop. If, after ten minutes, a tire pressure of 200 kPa (2.0 bar/29 psi) has been attained: # Switch off the tire inflation compressor. # Unscrew the filling hose from the valve of the defective tire. & WARNING Risk of accident from driving with sealed tires A tire temporarily sealed with tire sealant impairs the handling characteristics and is not suitable for higher speeds. # Adapt your driving style accordingly and drive carefully. # Do not exceed the maximum speed limit with a tire that has been repaired using tire sealant. # Observe the maximum permissible speed of 50 mph (80 km/h) for a tire sealed with tire sealant. * NOTE Staining caused by leaking tire seal­ant After use, excess tire sealant may leak out from the filling hose. # Therefore, place the filling hose in the plastic bag that contained the TIREFIT kit. + ENVIRONMENTAL NOTE Environmental pollution caused by environmentally irre­sponsible disposal Tire sealant contains pollutants. # Have the tire sealant bottle disposed of professionally, e.g. at an authorized Mercedes-Benz Center. # Stow the tire sealant bottle and the tire infla­tion compressor. # Pull away immediately. # Stop driving after approximately ten minutes and check the tire pressure using the tire inflation compressor. The tire pressure must now be at least 130 kPa (1.3 bar/19 psi). & WARNING Risk of accident due to the specified tire pressure not being attained If the specified tire pressure is not reached, the tire is too badly damaged. The tire sealant cannot repair the tire in this instance. The braking and driving characteristics may be greatly impaired. # Do not continue driving. # Consult a qualified specialist workshop. In cases such as the one mentioned above, con­tact an authorized Mercedes-Benz Center. Or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada). # Correct the tire pressure if it is still at least 130 kPa (1.3 bar/19 psi). For values, see tire and load data plate or tire pressure table on the driver-side B-pillar. # To increase the tire pressure: switch on the tire inflation compressor. # To reduce the tire pressure: press pressure release button 1 next to manometer 2. # When the tire pressure is correct, unscrew the filling hose from the valve of the sealed tire. # Screw the valve cap onto the valve of the sealed tire. # Pull the tire sealant bottle out of the tire infla­tion compressor. The filling hose stays on the tire sealant bottle. # Drive to the nearest qualified specialist work­shop and have the tire, tire sealant bottle and filling hose replaced there. Notes on the 12 V battery & WARNING Risk of explosion due to elec­trostatic charge Electrostatic charge can ignite the highly explosive gas mixture in the battery. # To discharge any electrostatic charge that may have built up, touch the metal vehicle body before handling the battery. The highly flammable gas mixture is created while the battery is charging and during starting assis­tance. For safety reasons, Mercedes-Benz recommends that you only use batteries which have been tes­ted and approved for your vehicle by Mercedes-Benz. & WARNING Danger of chemical burns from the battery acid Battery acid is caustic. # Avoid contact with the skin, eyes or clothing. # Do not lean over the battery. # Do not inhale battery gases. # Keep children away from the battery. # Immediately rinse battery acid off thor­oughly with plenty of clean water and seek medical attention immediately. + ENVIRONMENTAL NOTE Environmental damage due to improper disposal of bat­teries Batteries contain pollutants. It is illegal to dispose of them with the household rubbish. # Dispose of batteries in an environmentally responsible manner. Take discharged batteries to a qualified specialist workshop or to a collection point for used batteries. If you have to disconnect the 12 V battery, con­ tact a qualified specialist workshop. Comply with safety notes and take protective measures when handling batteries. Risk of explosion. Fire, naked flames and smoking are prohibited when handling the battery. Avoid creating sparks. Electrolyte or battery acid is corrosive. Avoid contact with the skin, eyes or clothing. Wear suitable protective clothing, in particular gloves, an apron and a face mask. Immediately rinse electrolyte or acid splashes off with clean water. Consult a doctor if neces­sary. Keep children away. Observe this Operator's Manual. If you do not want to use the vehicle for a long period of time, consult a qualified specialist work­shop. Notes on the high-voltage battery & DANGER Risk of fire and explosion from excessive internal pressure of the high-voltage battery In the event of a vehicle fire, flammable gas can escape and ignite. # If there is an unusual smell, smoke or burn marks, stop the charging process immediately. # Leave the danger zone immediately. Secure the danger area at a sufficient distance. # Call the fire service. Observe the notes on charging the high-voltage battery (/ page 188). Risk of explosion. Fire, naked flames and smoking are prohibited when handling the battery. Avoid creating sparks. Electrolyte or battery acid is corrosive. Avoid contact with the skin, eyes or clothing. Wear suitable protective clothing, in particular gloves, an apron and a face mask. Immediately rinse electrolyte or acid splashes off with clean water. Consult a doctor if neces­sary. Wear safety glasses. Keep children away. Observe this Operator's Manual. Starting assistance and charging the 12 V battery # Only have starting assistance provided by a qualified specialist workshop, e.g. an author­ized Mercedes-Benz Center. # Only have the battery charged at a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. Replacing the 12 V battery # Only have the battery replaced at a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center. Overview of the permitted towing methods * NOTE Damage caused by automatic brak­ing If one of the following functions is activated, the vehicle brakes automatically in certain sit­uations: R Active Brake Assist R Active Distance Assist DISTRONIC R HOLD function R Active Parking Assist To avoid damage to the vehicle, deactivate these systems in the following or similar situa­tions: # During towing. # In a car wash. Mercedes-Benz recommends transporting your vehicle in the case of a breakdown, rather than towing it away. For towing, use a tow rope or tow bar with both axles on the ground. Do not use tow bar systems. If you notice that the vehicle has lost coolant, do not have it towed away. Have the vehicle transpor­ted instead. * NOTE Damage to the vehicle due to tow­ing away incorrectly # Observe the instructions and notes on towing away. Vehicles with rear-wheel drive Permitted towing methods Both axles on the ground Front axle raised Rear axle raised 4MATIC vehicles Yes, maximum 30 miles (50 km) at 30 mph (50 km/h), only forwards with the driver in the cockpit No Yes, maximum 30 miles (50 km) at 30 mph (50 km/h) Permitted towing methods Both axles on the ground Front axle raised Rear axle raised Yes, maximum 30 miles (50 km) at 30 mph (50 km/h), only forwards with the driver in the cockpit No No Towing the vehicle with both axles on the ground # Observe the notes on the permitted towing methods (/ page 361). # Make sure that the 12 V battery is connected and charged. Observe the following points when the 12 V bat­ tery is disconnected or discharged: R the drive system cannot be started R the electric parking brake cannot be released or applied R the selector lever cannot be put into position i or j. Only one transportation operation will be permit­ted when at least one of the following conditions occurs: R If the selector lever cannot be put into position i. R if the 12 V battery is disconnected or flat R if the display on the instrument cluster is not working R if the á Towing Not Permitted See Oper­ator's Manual message is displayed R if the +Check Coolant Level See Opera-tor's Manual message is displayed R if the d Stop Switch Off Vehicle message is displayed # In such cases, transport the vehicle (/ page 363). * NOTE Damage due to towing away at excessively high speeds or over long dis­tances The drivetrain could be damaged when towing at excessively high speeds or over long distan­ces. # A towing speed of 30 mph (50 km/h) must not be exceeded. # A towing distance of 30 miles (50 km) must not be exceeded. & WARNING Risk of accident when towing a vehicle which is too heavy If the vehicle to be tow-started or towed away is heavier than the permissible gross mass of your vehicle, the following situations can occur: R The towing eye may become detached. R The vehicle/trailer combination may swerve or rollover. # Before tow-starting or towing away, check if the vehicle to be tow-started or towed away exceeds the permissible gross mass. If a vehicle must be tow-started or towed away, its gross vehicle weight rating must not exceed the gross vehicle weight rating of the towing vehicle. # Information on the gross vehicle weight rating of the vehicle can be found on the vehicle identification plate (/ page 401). Towing the vehicle away # Install the towing eye (/ page 366). # Fasten the towing device. * NOTE Damage due to incorrect connec­tion of the tow bar # Only connect the tow rope or tow bar to the towing eyes. # Deactivate the automatic locking mechanism (/ page 80). # Do not activate the HOLD function. # Deactivate the tow-away alarm (/ page 102). # Deactivate Active Brake Assist (/ page 241). # Put the selector lever into position i. # Release the electric parking brake. # Remain in the cockpit during towing and observe the display messages. # Do not switch off the vehicle while it is being towed. # Do not open the driver's door or front passenger door, because the selector lever will otherwise automatically switch to position j. & WARNING Risk of accident due to limited safety-related functions during the towing process Safety-related functions are limited or no lon­ger available in the following situations: R The vehicle is switched off. R The brake system or power steering sys­tem is malfunctioning. R The energy supply or the on-board electri­cal system is malfunctioning. # In such cases, do not tow the vehicle. # Transport the vehicle (/ page 363). * NOTE Damage to the drive system due to incorrect towing The vehicle may not be towed in the following situations: R The vehicle is switched off. R The brake system or power steering sys­tem is malfunctioning. R The energy supply or the on-board electri­cal system is malfunctioning. # In such cases, do not tow the vehicle. * NOTE Damage due to excessive tractive power If you pull away sharply, the tractive power may be too high and the vehicles could be damaged. # Pull away slowly and smoothly. Loading the vehicle for transport Requirements: R The vehicle is stationary. R The vehicle is switched off. R The driver's display is in the initial state with no menus open (/ page 281). Transport is also possible with a warning message visible. R The 12 V battery is charged. # If necessary, set the system language (/ page 307). # Observe the notes on towing away (/ page 362). # Connect the towing device to the towing eye in order to load the vehicle. # Switch on the power supply (/ page 173). # Shift the transmission to position i. % The transmission may be locked in position j in the event of damage to the electrics. To shift to i, provide the on-board electrical system with power (/ page 360). Vehicles with AIRMATIC * NOTE Possible damage to the vehicle when loading or unloading When loading or unloading, the vehicle must be raised to transport level. If the transport settings are not shown or the Vehicle Not Ready for Loading message is displayed, the vehicle may not be loaded or unloaded. # If required, raise the vehicle to transport level again. # A vehicle that cannot be raised to trans­port level may not be loaded or unloaded using a ramp. Consult a qualified special­ist workshop. & WARNING Risk of accident due to activa­ted transport level If the vehicle is raised to transport level, driv­ing and driving safety systems have only limi­ted availability and the view from the vehicle is restricted. Driving safety is severely restricted and there is a risk of an accident! # Do not use transport level in normal road operation. # Only activate and use transport level to load the vehicle and when not on public roads. # Ensure that no persons or obstacles are located in the area surrounding the vehi­cle. Raising the vehicle to transport level Vehicles with AIRMATIC # Press the G button for at least five sec­onds. # Immediately press and hold the a button for at least one second. The For Transport Level Switch On Vehicle message is displayed. # Select Vehicle Transport. % The noise certification mode is intended exclusively for the technical test organization. It restricts the drive power of the vehicle and must not be used in customer operations. # Switch on the vehicle(/ page 175). The transport settings are displayed. # Swipe down to select the Transport Level and press a. The vehicle is raised and the Vehicle raising... Do not drive onto ramp yet message is dis­played for 5 seconds. The raising process can last up to 60 seconds and can be canceled with the G button. # When raising, do not switch off the vehicle. While the vehicle is being raised, you can maneu­ver at a maximum speed of 25 mph (40 km/h). # Before loading the vehicle, wait until transport level has been reached and the Transport Level status is shown. % If the vehicle is raised to transport level, the transport settings will continue to be shown even after a restart. Operation of the driver's display is restricted. When the vehicle is at transport level, it is lowered again in the following situations: R When driving faster than 25 mph (40 km/h). R The 12 V battery is discharged. The vehicle is adjusted to the height of the last active level. Transporting the vehicle # Load the vehicle onto the transporter. # Shift the transmission to position j. # Use the electric parking brake to secure the vehicle against rolling away. # Switch off the vehicle and the power supply. # Only secure the vehicle by the wheels. 4MATIC vehicles Towing eye storage location Installing and removing the towing eye #Make sure that the front and rear axles cometo rest on the same transportation vehicle.Towing eye 1 is located under the trunk floor.* NOTE Damage to the drive train due to incorrect positioning of the vehicle # Do not position the vehicle above the connection point of the transport vehi­cle. Unloading the vehicle Vehicles with AIRMATIC # Make sure that the vehicle is raised to trans­port level before unloading . Lowering the vehicle after unloading # Switch on the power supply. # Switch on the vehicle. # Swipe up in the transport settings to select the Standard Level and press a. The vehicle is adjusted to the height of the last active level and the Lowering Vehicle… mes­sage is displayed. # After the vehicle has been lowered, press the G button for at least two seconds. The transport settings are closed. # Press cover 1 at top 2 inwards and remove. # Screw in the towing eye clockwise as far as it will go and tighten. # Make sure that cover 1 engages in the bumper when you remove the towing eye. * NOTE Damage to the vehicle due to incor­rect use of the towing eye or trailer hitch When a towing eye or trailer hitch is used to recover a vehicle, the vehicle may be damaged in the process. # Only use the towing eye or trailer hitch to tow away or tow start the vehicle. # Do not use the towing eye or trailer hitch to tow the vehicle during recovery. Tow-starting the vehicle # If the drive system does not start, have the vehicle transported to a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center. # The drive system cannot be started by tow-starting the vehicle. Do not perform any attempts to tow-start the vehicle. Notes on electrical fuses & WARNING Risk of accident and injury due to overloaded lines If you manipulate or bridge a faulty fuse or if you replace it with a fuse with a higher amper­age, the electric line could be overloaded. This could result in a fire. # Always replace faulty fuses with speci­fied new fuses containing the correct amperage. * NOTE Damage due to incorrect fuses Using incorrect fuses can result in damage to electrical components or systems or their functions being considerably restricted. # Use only fuses approved for Mercedes-Benz with the respective specified fuse rating. Blown fuses must be replaced with fuses of the same rating, which you can recognize by the color and the label. The fuse ratings and further infor­mation to be observed can be found in the fuse assignment diagram. Fuse assignment diagram: on the fuse box in the rear passenger compartment (/ page 368). * NOTE Damage or malfunctions caused by moisture Moisture may cause damage to the electrical system or cause it to malfunction. # When the fuse box is open, make sure that no moisture can enter the fuse box. # When closing the fuse box, make sure that the seal of the lid is positioned cor­rectly on the fuse box. If the newly inserted fuse also blows, have the cause traced and rectified at a qualified specialist workshop. Ensure the following before replacing a fuse: R The vehicle is secured against rolling away. R All electrical consumers are switched off. R The vehicle is switched off. The electrical fuses are located in various fuse boxes: R Fuse box on the driver's side of the cockpit (/ page 368) R Fuse box in the front passenger footwell (/ page 368) R Fuse box in the rear passenger compartment (/ page 368) Opening and closing the fuse box in the cockpit R Observe the notes on electrical fuses (/ page 367). The fuse box is on the driver's side on the side of the cockpit under a cover. # Mercedes-Benz recommends you have the fuse box opened at an authorized Mercedes-Benz Center. Opening and closing the fuse box in the front passenger footwell Requirements: R Observe the notes on electrical fuses (/ page 367). Right-hand drive vehicles: the fuse box is on the left side. # To open the fuse box: remove cover 1. # To close the fuse box: reinsert cover 1. Opening and closing the fuse box in the rear passenger compartment Requirements: R Observe the notes on electrical fuses (/ page 367). The fuse box is located in the center of the vehicle under the seat. # To open and close it, consult an authorized Mercedes-Benz Center. Make sure there are no vibrations, noises or unusual handling characteristics when the vehicle is in motion. This may indicate that the wheels or tires are damaged. Hidden tire damage could also be causing the unusual handling characteristics. If you suspect that a tire is defective, reduce your speed immediately and have the tires and wheels checked at a qualified specialist workshop. & WARNING Risk of injury through damaged tires Damaged tires can cause tire pressure loss. # Check the tires regularly for signs of damage and replace any damaged tires immediately. & WARNING Risk of hydroplaning due to insufficient tire tread Insufficient tire tread will result in reduced tire grip. In heavy rain or slush the risk of hydroplaning is increased, in particular where speed is not adapted to suit the conditions. # Thus, you should regularly check the tread depth and the condition of the tread across the entire width of all tires. Minimum tread depth for: R Summer tires: â in (3 mm) R M+S tires: ãin (4 mm) # For safety reasons, replace the tires before the legally-prescribed limit for the minimum tread depth is reached. Carry out the following checks on all wheels regu­larly, at least once a month or as required, for example, prior to a long journey or driving off-road: R Check the tire pressure (/ page 372). R Visually inspect wheels and tires for damage. R Check the valve caps. R Visual check of the tire tread depth and the tire contact surface across the entire width. The minimum tread depth for summer tires is â in (3 mm) and for winter tires ã in (4 mm). Six marks 1 show where the bar indicators(arrow) are integrated into the tire tread. They arevisible once a tire tread depth of approximatelyá in (1.6 mm) has been reached. & WARNING Risk of accident due to incor­rectly installed snow chains If you have installed snow chains on the front wheels, they may drag against the vehicle body or chassis components. # Never install snow chains on the front wheels. # Only install snow chains on the rear wheels in pairs. * NOTE Damage to components of the vehi­cle body or chassis due to mounted snow chains If you mount snow chains to the front wheels of 4MATIC vehicles, you may damage compo­nents of the vehicle body or chassis. # Only mount snow chains to the rear wheels of 4MATIC vehicles. * NOTE Damage to wheel trims due to snow chains being installed If you install snow chains on aluminum wheels you could damage the wheel trims. # Remove the wheel trims from the alumi­num wheels before installing snow chains. Observe the following notes when using snow chains: R Snow chains are only permissible for certain wheel/tire combinations. You can obtain infor­mation about this from an authorized Mercedes-Benz Center. R For safety reasons, only use snow chains that have been specifically approved for your vehi­cle by Mercedes-Benz, or snow chains with the same quality standard. R Comply with the installation instructions of the snow chain manufacturer. R If snow chains are installed, the maximum per­missible speed is 30 mph (50 km/h). R Vehicles with Active Parking Assist: do not use Active Parking Assist when snow chains are installed. R Vehicles with rear axle steering: if snow chains are installed, only drive with snow chain mode active (/ page 371). % You can deactivate ESP® to pull away (/ page 216). This allows the wheels to spin, achieving an increased driving force. Multimedia system: 4 © 5 ß 5 y # Activate or deactivate Snow Chain Mode. When the function is active, the vehicle behaves as if snow chains were mounted. For example, the maximum steering movement of the rear wheels is limited and the turning circle is thus increased. Additionally, parts of the driving and driving safety systems are not available when snow chain mode is active. Notes on tire pressure & WARNING Risk of accident due to insuffi­cient or excessive tire pressure Underinflated or overinflated tires pose in par­ticular the following risks: R The tires can burst. R The tires can wear excessively and/or unevenly. R The driving characteristics as well as the steering and braking characteristics may be greatly impaired. # Comply with the recommended tire pres­sures and check the tire pressure of all tires, including the spare wheel, regu­larly: R Monthly R When the load changes R Before embarking on a longer journey R If operating conditions change, e.g. off-road driving # Adjust the tire pressure, if necessary. Tire pressure which is too high or too low can: R Shorten the service life of the tires. R Cause increased tire damage. R Adversely affect driving characteristics and thus driving safety, e.g. due to hydroplaning. & WARNING Risk of accident due to too low a tire pressure Tires with pressure that is too low can over­ heat and burst as a consequence. In addition, they also suffer from irregular wear, which can significantly impair the brak­ing properties and the handling characteris­tics. # Avoid excessively low tire pressure. Tire pressure which is too low can cause: R Tire defects as a result of overheating R Impaired handling characteristics R Irregular wear R Increased energy consumption & WARNING Risk of accident due to too high a tire pressure Tires with excessively high pressure can burst. In addition, they also suffer from irregular wear, which can significantly impair the brak­ ing properties and the handling characteris­tics. # Avoid excessively high tire pressures. Tire pressure which is too high can cause: R Increased braking distance R Impaired handling characteristics R Irregular wear R Impaired driving comfort R Susceptibility to damage & WARNING Risk of accident due to repea­ted pressure drop in the tires The wheels, valves or tires could be damaged. Too low a tire pressure can lead to the tires bursting. # Examine the tires for foreign objects. # Check whether the tire has a puncture or the valve has a leak. # If you are unable to rectify the damage, contact a qualified specialist workshop. You can find information on tire pressure for the vehicle's factory-installed tires on the following labels on the B-pillar on the driver's side: R Tire and Loading Information placard (/ page 377) R Tire pressure table (/ page 373). Observe the maximum tire pressure (/ page 383). Use a suitable pressure gage to check the tire pressure. The outer appearance of a tire does not permit any reliable conclusion about the tire pres­ sure. Only correct tire pressures when the tires are cold. Conditions for cold tires: R The vehicle has been parked with the tires out of direct sunlight for at least three hours. R The vehicle has traveled less than 1 mile (1.6 km). The vehicle's tires heat up when driving. As the temperature of the tires increases, so too does the tire pressure. Vehicles with a tire pressure monitoring system: you can also see the tire pressure in the driver's display (/ page 376). The tire pressures recommended for increased load/speed in the tire pressure table can affect the ride comfort. & WARNING Risk of accident due to unsuita­ble accessories on tire valves If you mount unsuitable accessories onto tire valves, the tire valves may be overloaded and malfunction, which can cause tire pressure loss. # Only screw standard valve caps or valve caps specifically approved by Mercedes-Benz for your vehicle onto the tire valve. Tire pressure table The tire pressure table is on the B-pillar on the driver's side. % The data shown in the images is example data. The tire pressure table shows the recommended tire pressure for all tires approved for this vehicle. The recommended tire pressures apply for cold tires under various operating conditions, i.e. load­ing and/or speed of the vehicle. If one or more tire sizes precede a tire pressure, the tire pressure information following is only valid for those tire sizes. The load conditions "partially laden" and "fully laden" are defined in the table for different num­bers of passengers and amounts of luggage. The actual number of seats may differ from this. Some tire pressure tables only show the rim diam­eter instead of the complete tire size, e.g. R18. The rim diameter is part of the tire size and can be found on the tire side wall (/ page 384). Be sure to also observe the following further rela­ted subjects: R Notes on tire pressure (/ page 372) R Tire and Loading Information placard (/ page 377) R Maximum tire pressure (/ page 383) Checking the tire pressure manually # Read the tire pressure recommended for the current operating conditions from the tire and loading information placard or the tire pres­sure table. Observe the notes on tire pressure. # Remove the valve cap of the tire to be checked. # Press the tire pressure gauge securely onto the valve. # Read the tire pressure. # If the tire pressure is lower than the recom­mended value, increase the tire pressure to the recommended value. # If the tire pressure is higher than the recom­mended value, release air. To do so, press down the metal pin in the valve, e.g. using the tip of a pen. Then check the tire pressure again using the tire pressure gauge. # Screw the valve cap onto the valve. Further related subjects: R Notes on tire pressure (/ page 372) R Tire pressure table (/ page 373) R Tire and loading information placard (/ page 377) Tire pressure monitoring system ¦Function of the tire pressure monitoring system & DANGER Risk of accident due to incorrect tire pressure Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommen­ded by the vehicle manufacturer on the vehi­cle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should deter­mine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pres­sure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pres­sure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driv­er’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale. Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunc­tions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. The system checks the tire pressure and the tire temperature of the tires fitted to the vehicle by means of a tire pressure sensor. The tire pressure and the tire temperature appear on the driver's display. If there is a substantial pressure loss or if the tire temperature is excessive, you will be warned with display messages (/ page 471) or the h warning lamp in the driver's display (/ page 488). The tire pressure monitoring system is only an aid. It is the driver's responsibility to set the tire pres­sure to the recommended cold tire pressure suita­ble for the operating situation. In most cases, the tire pressure monitoring sys­tem will automatically update the new reference values after you have changed the tire pressure. You can, however, also update the reference val­ues by restarting the tire pressure monitoring sys­tem manually (/ page 376). System limits The system may be impaired or may not function particularly in the following situations: R incorrect reference values were taught in R sudden pressure loss caused by a foreign object penetrating the tire, for example R there is a malfunction caused by another radio signal source ¦Checking the tire pressure with the tire pres­ sure monitoring system Requirements: R The vehicle is switched on. Driver's display: 4 © 5 Service # Press a to confirm. One of the following displays appears: R Current tire pressure of each wheel: R Tire pressure displayed after driving for a few minutes.: current values are not yet known to the system. The pressure/tempera­ture values of each tire are displayed as soon as they are known to the system. R Tire Pressure Monitor Active: the teach-in process of the system is not yet complete. The tire pressures are already being monitored. # Compare the current tire pressure with the recommended tire pressure for the current operating condition (/ page 373). Addition­ ally, observe the notes on cold tires (/ page 372). % The values displayed on the driver's display may deviate from those of the tire pressure gauge as they refer to sea level. At high eleva­tions, the tire pressure values indicated by a tire pressure gauge are higher than those shown on the driver's display. Bear in mind the following related topic: R Notes on tire pressure (/ page 372) ¦Restarting the tire pressure monitoring system Requirements R The recommended tire pressure is correctly set for the respective operating status on each of the four wheels (/ page 372). Restart the tire pressure monitoring system in the following situations: R The tire pressure has changed. R The wheels or tires have been changed or newly installed. Driver's display: 4 © 5 Service # Select Tire Pressure and confirm with a. # Swipe downwards on Touch Control on the steering wheel. The Use current pressures as new reference values? message is shown in the driver's dis­play. # Select Yes and confirm the restart with a. The Tire Pressure Monitor Restarted message is shown in the driver's display. Current warning messages are deleted and the yellow h warning lamp goes out. After you have been driving for a few minutes, the system checks whether the current tire pressure values are within the specified range. The current tire pressure values are then accepted as reference values and monitored. If the tire pressure levels are not within the specified range, the Please Correct Tire Pres­sure message appears. Note also the following related topic: R Notes on tire pressure (/ page 372) Notes on Tire and Loading Information placard & WARNING Risk of accident from overloa­ded tires Overloaded tires may overheat and burst as a consequence. Overloaded tires can also impair the steering and handling characteris­tics and lead to brake failure. # Observe the load rating of the tires. # The load rating must be at least half the permissible axle load of the vehicle. # Never overload the tires by exceeding the maximum load. The Tire and Loading Information placard is on the B-pillar on the driver's side of the vehicle. 1Tire and Loading Information placard% The data shown in the illustration is example data. The Tire and Loading Information placard shows the following information: R Maximum number of seats 2 according to the maximum number of people permitted to travel in the vehicle. R Maximum permissible load 3 comprises the gross weight of all vehicle occupants, load and luggage. R Recommended tire pressure 1 for cold tires. The recommended tire pressures are valid for the maximum permissible load and up to the maximum permissible vehicle speed. Please also note: R Information on permissible weights and loads on the vehicle identification plate (/ page 401). R Information on tire pressure in the tire pres­sure table (/ page 373). Further related subjects: R Determining the maximum permissible load (/ page 378) R Notes on tire pressure (/ page 372). Steps for Determining Correct Load Limit The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575, pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966". # (1): Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle's placard. # (2): Determine the combined weight of the driver and passengers that will be riding in your vehicle. # (3): Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. # (4): The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1,400 lbs. and there will be five 150 lb pas­sengers in your vehicle, the amount of availa­ble cargo and luggage load capacity is 650 lbs. (1,400 - 750 (5 x 150) = 650 lbs.) # (5): Determine the combined weight of lug­gage and cargo being loaded on the vehicle. That weight may not safely exceed the availa­ble cargo and luggage load capacity calcula­ted in Step 4. # (6): If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. % Not all vehicles are permitted to tow a trailer. Towing a trailer is only permitted if a trailer-hitch is installed. Please consult an authorized Mercedes-Benz dealer if you have any ques­tions about towing a trailer with your vehicle. Even if you have calculated the total load carefully, you should still make sure that the maximum per­missible gross weight and the maximum gross axle weight rating of your vehicle are not excee­ded. Details can be found on the vehicle identifi­cation plate. Step 1 # Have your loaded vehicle – including driver, occupants and load – weighed on a vehicle weighbridge. The measured values may not exceed the maximum permissible values stated on the vehicle identification plate. Further related subjects: R Calculation example for determining the maxi­mum load (/ page 379) R Tire and Loading Information placard (/ page 377) R Tire pressure table (/ page 373) R Vehicle identification plate (/ page 401) Example 1 Calculation example for determining the maximum load The following table shows examples of how to cal­culate total and load capacities with varying seat­ing configurations and different numbers and sizes of occupants. The following examples use a maximum load of 1500 lbs (680 kg). This is for illustration purposes only. Make sure you are using the actual load limit for your vehicle stated on your vehicle's Tire and Loading Information placard (/ page 377). The higher the weight of all the occupants, the smaller the maximum load for luggage. Example 2 Combined maximum weight of occupants and 1500 lbs (680 kg) 1500 lbs (680 kg) load (data from the Tire and Loading Information placard) Number of people in the vehicle (driver and occu­pants) Example 1 5 Example 2 1 Distribution of the occupants Front: 2 Rear: 3 Front: 1 Weight of occupants Occupant 1: 150 lbs (68 kg) Occupant 2: 180 lbs (82 kg) Occupant 3: 160 lbs (73 kg) Occupant 4: 140 lbs (63 kg) Occupant 5: 120 lbs (54 kg) Occupant 1: 200 lbs (91 kg) Total weight of all occupants 750 lbs (340 kg) 200 lbs (91 kg) Step 3 Permissible load (maximum gross vehicle weight rating from the Tire and Loading Information plac­ard minus the gross weight of all occupants) Example 1 1500 lbs (680 kg) Ò 750 lbs (340 kg) = 750 lbs (340 kg) Example 2 1500 lbs (680 kg) Ò 200 lbs (91 kg) = 1300 lbs (589 kg) Overview of tire labeling 1Uniform Tire Quality Grading Standards2DOT (Department of Transportation), (TIN)Tire Identification Number3Maximum tire load (/ page 383)4Maximum tire pressure (/ page 383)5 Manufacturer 6 Characteristics of the tire (/ page 384) 7 Tire size designation, load-bearing capacity, speed rating and load index (/ page 384) 8 Tire name % The data shown in the illustration is example data. Tire Quality Grading In accordance with the US Department of Trans­portation's "Uniform Tire Quality Grading Stand­ards", tire manufacturers are required to grade their tires on the basis of the following three per­formance factors: 1 Tread wear grade 2 Traction grade 3 Temperature grade % The data shown in the illustration is example data. % The classification is not legally stipulated for Canada, but it is generally stated. Tread wear grade The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified govern­ment test course. For example, a tire graded 150 would wear one and one-half (1\1/2\) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to var­iations in driving habits, service practices and dif­ferences in road characteristics and climate. Traction grade & DANGER Risk of accident due to inade­quate traction The traction grade assigned to this tire is based on straight-ahead braking traction tests. # Always adapt your driving style and drive at a speed to suit the prevailing traffic and weather conditions. * NOTE Damage to the drivetrain from wheelspin # Avoid wheelspin. The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified govern­ment test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Temperature grade & WARNING Risk of accident from tire over­heating and tire failure Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause excessive heat build-up and possi­ble tire failure. # Observe the recommended tire pressure. # Regularly check the pressure of all the tires. # Adjust the tire pressure, if necessary. The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and exces­sive temperature can lead to sudden tire failure. The grade C corresponds to a level of perform­ance which all passenger car tires must meet under the Federal Motor Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. DOT, Tire Identification Number (TIN) US tire regulations stipulate that every tire manu­facturer or retreader must imprint a TIN in or on the side wall of each tire produced. % The data shown in the image is example data. The TIN is a unique identification number to iden­ tify tires and comprises the following: R DOT (Department of Transportation): tire sym­bol marks 1 indicating that the tire complies with the requirements of the US Department of Transportation. R Manufacturer identification code: manufac­turer identification code 2 contains details of the tire manufacturer. New tires have a code with two symbols. Retreaded tires have a code with four symbols. Further information on retreaded tires (/ page 388). R Tire size: identifier 3 describes the tire size. R Tire type code: tire type code 4 can be used by the manufacturer as a code to describe specific characteristics of the tire. R Manufacturing date: manufacturing date 5 provides information about the age of a tire. The 1st and 2nd positions represent the cal­endar week and the 3rd and 4th positions state the year of manufacture (e.g. "3208" represents the 32nd week of 2008). Information on the maximum tire load Specifications for maximum tire pressure % The data shown in the illustration is example data. Maximum tire load 1 is the maximum permissi­ble weight for which the tire is approved. Do not overload the tires by exceeding the speci­fied load limit. The maximum permissible load can be found on the vehicle's tire and loading informa­tion placard on the B-pillar on the driver's side (/ page 377). %The data shown in the illustration is exampledata.Never exceed maximum tire pressure 1 speci-fied for the tire. Always observe the recommen-ded tire pressure for your vehicle when adjustingthe tire pressure (/ page 373).Information on tire characteristics Tire size designation, load-bearing capacity, speed rating and load index & WARNING Risk of injury through exceed­ing the specified tire load-bearing capa­city or the permissible speed rating Exceeding the specified tire load rating or the permissible speed rating may lead to tire dam­age and to the tires bursting. # Therefore, only use tire types and sizes approved for your vehicle model. # Observe the tire load rating and speed rating required for your vehicle. %The data shown in the image is example data.This information describes the type of tire cordand the number of layers in side wall 1 andunder tire tread 2.1 First letter(s) 2 Nominal tire width in millimeters 3 Aspect ratio in % 4 Tire code 5 Rim diameter 6 Load-bearing index 7 Speed rating 8 Load index % The data shown in the illustration is example data. Information about reading tire data can be obtained from any qualified specialist workshop. First letter(s) 1: R Without: passenger vehicle tires according to European manufacturing standards. R "P": passenger vehicle tires according to US manufacturing standards. R "LT": light truck tires according to US manu­facturing standards. R "T": compact emergency spare wheels with high tire pressure that are only designed for temporary use in an emergency. Aspect ratio 3: Ratio between tire height and tire width in percent (tire height divided by tire width). Tire code 4 (tire type): R "R": radial tire R "D": bias ply tire R "B": bias radial tires R "ZR": radial tire with a maximum speed above 149 mph (240 km/h) (optional) Rim diameter 5: The diameter of the bead seat (not the diameter of the rim flange). The rim diameter is specified in inches (in). Load-bearing index 6: Numerical code that specifies the maximum load-bearing capacity of a tire (e.g. "91" corresponds to 1,356 lbs (615 kg)). The load-bearing capacity of the tire must be at least half the gross axle weight rating of your vehi­cle. Do not overload the tires by exceeding the specified load limit. See also: R Maximum permissible load on the tire and loading information placard (/ page 377) R Maximum tire load (/ page 383) R Load index Speed rating 7: Specifies the approved maximum speed of the tire. % An electronic speed limiter prevents your vehicle from exceeding a speed of 130 mph (210 km/h). Make sure that your tires have the required speed rating. You can obtain information on the required speed rating from an authorized Mercedes-Benz Service Center. Summer tires Index Speed rating Q up to 100 mph (160 km/h) R up to 106 mph (170 km/h) S up to 112 mph (180 km/h) T up to 118 mph (190 km/h) H up to 130 mph (210 km/h) V up to 149 mph (240 km/h) W up to 168 mph (270 km/h) Y up to 186 mph (300 km/h) Index Speed rating ZR...Y1 up to 186 mph (300 km/h) ZR...(..Y)1 over 186 mph (300 km/h) ZR1 over 149 mph (240 km/h) R Specifying the speed rating as the "ZR" index in tire code 4 is optional for tires up to 186 mph (300 km/h). R If your tire code 4 includes "ZR" and there is no speed rating 7, find out what the maxi­mum speed is from the tire manufacturer. R If load-bearing index 6 and speed rating 7 are in brackets, the maximum speed rating of your tire is above 186 mph (300 km/h). To find out the maximum speed, ask the tire man­ufacturer. 1 "ZR" stated in the tire code. 2 Or "M+Si" for winter tires. All-weather tires and winter tires Index Speed rating Q M+S2 up to 100 mph (160 km/h) T M+S2 up to 118 mph (190 km/h) H M+S2 up to 130 mph (210 km/h) V M+S2 up to 149 mph (240 km/h) Winter tires bear the i snowflake symbol and fulfill the requirements of the Rubber Manufactur­ers Association (RMA) and the Rubber Association of Canada (RAC) regarding the tire traction on snow. Load index 8: R No specification given: standard load (SL) tire R "XL" or "Extra Load": extra load tire or rein­forced tire R "Light Load": light load tire R "C", "D", "E": a load range that depends on the maximum load that the tire can carry at a cer­tain pressure Tire structure and characteristics: describes the number of layers or the number of rubber-coated belts in the tire contact surface and the tire wall. These are made of steel, nylon, polyester and other materials. Bar: metric unit for tire pressure. 14.5038 pounds per square inch (psi) and 100 kilopascal (kPa) is the equivalent of one bar. DOT (Department of Transportation): DOT-marked tires fulfill the requirements of the U.S. Department of Transportation. Average weight of the vehicle occupants: the number of vehicle occupants for which the vehicle is designed, multiplied by 150 lb (68 kg). Uniform Tire Quality Grading Standards: a uniform standard to grade the quality of tires with regard to tread quality, tire traction and temperature characteristics. The quality grading assessment is made by the manufacturer following specifications from the U.S. government. The quality grade of a tire is printed on the side wall of the tire. Recommended tire pressure: the recommended tire pressure is the tire pressure specified for the tires mounted on the vehicle at the factory. The tire and information placard contains the rec­ommended tire pressure for cold tires, the maxi­mum permissible load and the maximum permissi­ble vehicle speed. The tire pressure table contains the recommen­ded tire pressure for cold tires under various oper­ating conditions, i.e. loading and/or speed of the vehicle. Increased vehicle weight due to optional equip­ment: the combined weight of all standard and optional equipment available for the vehicle, regardless of whether it is actually installed on the vehicle or not. Rim: the part of the wheel on which the tire is installed. GAWR (Gross Axle Weight Rating): the GAWR is the maximum gross axle weight rating. The actual load on an axle must never exceed the gross axle weight rating. The gross axle weight rating can be found on the vehicle identification plate on the B-pillar on the driver's side. Speed rating: the speed rating is part of the tire identification. It specifies the speed range for which a tire is approved. GVW (Gross Vehicle Weight): the gross vehicle weight comprises the weight of the vehicle includ­ing fuel, tools, the spare wheel, any accessories installed, occupants, luggage and the trailer nose-weight, if applicable. The gross vehicle weight must not exceed the gross vehicle weight rating GVWR as specified on the vehicle identification plate on the B-pillar on the driver's side. GVWR (Gross Vehicle Weight Rating): the GVWR is the maximum permitted gross weight of the fully laden vehicle (weight of the vehicle including all accessories, occupants, fuel, luggage and the trailer drawbar noseweight if applicable). The gross vehicle weight rating is specified on the vehicle identification plate on the B-pillar on the driver's side. Maximum weight of the laden vehicle: the maxi­mum weight is the sum of the curb weight of the vehicle, the weight of the accessories, the maxi­mum load and the weight of optional equipment installed at the factory. Kilopascal (kPa): metric unit for tire pressure. 6.9 kPa corresponds to 1 psi. Another unit for tire pressure is bar. 100 kilopascal (kPa) equals 1 bar. Load index: in addition to the load-bearing index, the load index may also be printed on the side wall of the tire. This specifies the load-bearing capacity of the tire more precisely. Curb weight: the weight of a vehicle with standard equipment including the maximum capacity of fuel, oil and coolant. It also includes the air condi­tioning system and optional equipment if these are installed on the vehicle, but does not include passengers or luggage. Maximum tire load: the maximum tire load is the maximum permissible weight in kilograms or lbs for which a tire is approved. Maximum permissible tire pressure: maximum permissible tire pressure for one tire. Maximum load on one tire: maximum load on one tire. This is calculated by dividing the maximum axle load of one axle by two. PSI (pounds per square inch): standard unit of measurement for tire pressure. Aspect ratio: ratio between tire height and tire width in percent. Tire pressure: the pressure inside the tire which applies an outward force to every square inch of the tire. The tire pressure is specified in pounds per square inch (psi), in kilopascals (kPa) or in bar. The tire pressure should only be corrected when the tires are cold. Cold tire pressure: the tires are cold when the vehicle has been parked for at least 3 hours with­out direct sunlight on the tires or the vehicle has been driven for less than 1 mile (1.6 km). Tire contact surface: the part of the tire that comes into contact with the road. Tire bead: the purpose of the tire bead is to ensure that the tire sits securely on the wheel rim. There are several wire cores in the tire bead to prevent the tire from changing length on the wheel rim. Side wall: the part of the tire between the tread and the tire bead. Weight of optional equipment: the combined weight of the optional equipment weighing more than the replaced standard parts and more than 5 lbs (2.3 kg). This optional equipment, such as high-performance brakes, level control system, a roof luggage rack or high-performance batteries, is not included in the curb weight and the weight of the accessories. TIN (Tire Identification Number): a unique identifi­cation number which can be used by a tire manu­facturer to identify tires, for example, in a product recall, and thus identify the purchasers. The TIN is made up of the manufacturer's identity code, tire size, tire type code and the manufacturing date. Load-bearing index: the load-bearing index is a code that contains the maximum load-bearing capacity of a tire. Traction: traction is the grip resulting from friction between the tires and the road surface. Wear indicator: narrow bars (tread wear bars) that are distributed over the tire contact surface. If the tire tread is level with the bars, the wear limit of 1/16 in (1.6 mm) has been reached. Distribution of vehicle occupants: distribution of vehicle occupants over designated seat positions in a vehicle. Maximum permissible payload weight: nominal load and luggage load plus 150 lb (68 kg) multi­plied by the number of seats in the vehicle. Notes on selecting, installing and replacing tires * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. & WARNING Risk of accident due to incor­rect wheel and tire dimensions If wheels and tires of the wrong size are instal­led, the service brakes or components in the brake system and in the wheel suspension may be damaged. # Always replace wheels and tires with ones that fulfill the specifications of the original part. For wheels, pay attention to the following: R Designation R Type For tires, pay attention to the following: R Designation R Manufacturer R Type & WARNING Risk of injury through exceed­ing the specified tire load-bearing capa­city or the permissible speed rating Exceeding the specified tire load rating or the permissible speed rating may lead to tire dam­age and to the tires bursting. # Therefore, only use tire types and sizes approved for your vehicle model. # Observe the tire load rating and speed rating required for your vehicle. * NOTE Vehicle and tire damage caused by non-approved tire types and sizes For safety reasons, only use tires, wheels and accessories which have been specially approved by Mercedes-Benz for your vehicle. These tires are specially adapted to the active safety systems, such as ABS, ESP® and 4MATIC, and marked as follows: R MO = Mercedes-Benz Original R MOE = Mercedes-Benz Original Extended (run-flat tires only for certain wheels) R MO1 = Mercedes-Benz Original (only cer­ tain AMG tires) Otherwise, certain properties, such as han­dling characteristics, vehicle noise emissions, consumption, etc. could be adversely affec­ted. Furthermore, other tire sizes could result in the tires rubbing against the body and axle components when loaded. This could result in damage to the tire or the vehicle. Only use tires, wheels and accessories that have been checked and recommended by Mercedes-Benz. * NOTE Risk to driving safety from retrea­ded tires Retreaded tires are neither tested nor recom­mended by Mercedes-Benz, since previous damage cannot always be detected on retrea­ded tires. For this reason driving safety cannot be guar­anteed. # Do not use used tires if you have no information about their previous usage. * NOTE Possible wheel and tire damage when driving over obstacles Large wheels have a smaller section width. As the section width decreases, the risk of wheels and tires being damaged when driving over obstacles increases. # Avoid obstacles or drive especially care­fully. # Reduce your speed when driving over curbs, speed bumps, manhole covers and potholes. # Avoid particularly high curbs. * NOTE Possible wheel and tire damage when parking on curbs or in potholes Parking on curbs or in potholes can damage the wheels and tires. # Only park on as level a surface as possi­ble. # Avoid curbs and potholes when parking. * NOTE Damage to electronic component parts due to the use of tire-installing tools Vehicles with tire pressure monitoring sys­tem: There are electronic component parts in the wheel. If tire-installing tools are positioned in the area of the valve, the electronic components could be damaged. # Tire-installing tools should not be applied in the area of the valve. # Always have tires change at a qualified specialist workshop. * NOTE Damage to summer tires at low ambient temperatures At low ambient temperatures, tears could form when driving with summer tires, causing per­manent damage to the tires. # At temperatures below 45 °F (7 °C) use i M+S tires. Accessory parts which are not approved for your vehicle by Mercedes-Benz, or which are not used correctly, can impair the operating safety. Before purchasing and using non-approved acces­sories, visit a qualified specialist workshop and inquire about: R Suitability R Legal stipulations R Factory recommendations & WARNING Risk of accident with high per­formance tires The special tire tread in combination with the optimized tire compound means that the risk of skidding and hydroplaning on wet roads is increased. In addition, the tire grip is greatly reduced at a low outside temperature and tire running tem­perature. # Switch on the ESP® and adapt your driv­ing style accordingly. # Use i M+S tires at outside tempera­tures of less than 50 °F (10 °C). # Only use the tires for their intended pur­pose. Observe the following when selecting, installing and replacing tires: R Furthermore, the use of certain tire types in certain regions and areas of operation can be highly beneficial. R Only use tires and wheels of the same type (summer tires, winter tires, MOExtended tires) and the same make. R Only install wheels of the same size (left and right) on each axle. It is only permissible to install a different wheel size in the event of a flat tire in order to drive to the specialist workshop. R Vehicles with a tire pressure monitoring sys­tem: all installed wheels must be equipped with functioning sensors for the tire pressure monitoring system. R At temperatures below 45°F (7°C) use winter tires or all-season tires marked i M+S for all wheels. Winter tires provide the best possible grip in wintry road conditions. R For M+S tires, only use tires with the same tread. R Observe the maximum permissible speed for the M+S tire which is installed. If the tire's maximum speed is below that of the vehicle, this must be indicated by an appropriate label in the driver's field of vision. R Break in new tires at moderate speeds for the first 60 miles (100 km). R Replace the tires after six years at the latest, regardless of wear. R When replacing with tires that do not feature run-flat characteristics: vehicles with MOExtended tires are not equipped with a TIREFIT kit at the factory. Equip the vehicle with a TIREFIT kit after replacing with tires that do not feature run-flat characteristics, e.g. winter tires. For more information on wheels and tires, contact a qualified specialist workshop. Be sure to also observe the following further rela­ ted subjects: R Notes on tire pressure (/ page 372) R Tire and loading information placard (/ page 377) R Tire size designation, load-bearing capacity, speed rating and load index (/ page 384) R Tire pressure table (/ page 373) R Notes on the emergency spare wheel (/ page 398) Notes on rotating wheels & WARNING Risk of injury through different wheel sizes Rotating the front and rear wheels can severely impair the driving characteristics. The wheel brakes or suspension components may also be damaged. # Rotate front and rear wheels only if the wheels and tires are of the same dimen­sions. Observe the instructions and safety notes on "Changing a wheel" (/ page 388) The wear patterns on the front and rear wheels differ: R Front wheels wear more on the tire shoulder R Rear wheels wear more in the center of the tire Do not drive with tires that have too little tread depth. This significantly reduces traction on wet roads (hydroplaning). On vehicles that have the same size front and rear wheels, rotate the wheels according to the inter­vals in the tire manufacturer's warranty book in your vehicle documents. If this is not available, rotate the tires every 3,000 to 6,000 miles (5,000 to 10,000 km), depending on the wear. Ensure that the direction of rotation is main­tained. Notes on storing wheels When storing wheels, observe the following notes: R After removing wheels, store them in a cool, dry and preferably dark place. R Protect the tires from contact with oil, grease or fuel. Overview of the tire-change tool kit * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. Apart from some country-specific variants, vehi­cles are not equipped with a tire-change tool kit. Consult a qualified specialist workshop to find out which wheel change tools are necessary and approved for changing the wheel on your vehicle. You require the following tools, forexample, to change a wheel: R Jack R Chock R Lug wrench R Alignment bolt The tire-change tool kit is located in tool bag 1 in the trunk. The tool bag contains: R Jack R Gloves R Lug wrench R Alignment bolt R Folding chock R Ratchet for jack Preparing the vehicle for a wheel change Requirements: R The vehicle is not on a slope. R The vehicle is on solid, non-slippery and level ground. R The required tire-change tool kit is available. % If your vehicle is not equipped with the tire-change tool kit, consult a qualified specialist workshop to find out about suitable tools. # Apply the electric parking brake manually. # Move the front wheels to the straight-ahead position. # Shift the transmission to position j. # Switch off the vehicle. # Make sure that the vehicle cannot be started. # Place chocks or other suitable items under the front and rear of the wheel that is diagonally opposite the wheel you wish to change. # Unload the vehicle. Removing and installing the wheel trim/hub caps Requirements: R The vehicle is prepared for a wheel change (/ page 392). Wheel trim The wheel trim covers the wheel bolts on vehicles with aluminum wheels. Before unscrewing the wheel bolts, remove the wheel trim. # To remove: using both hands, carefully reach into two wheel trim openings and remove the wheel trim. Raising the vehicle when changing a wheel Requirements: R There are no persons in the vehicle. R The vehicle has been prepared for a wheel change (/ page 392). Important notes on using the jack: R Use only a vehicle-specific jack that has been approved by Mercedes-Benz to raise the vehi­cle. R The jack is only designed for raising and hold­ing the vehicle for a short time while a wheel is being changed and not for maintenance work under the vehicle. R The jack must be placed on a firm, flat and non-slip surface. If necessary, use a large, flat, load-bearing, non-slip underlay. R The foot of the jack must be positioned verti­cally under the jack support point. Rules of conduct when the vehicle is raised: R Never place your hands or feet under the vehi­ cle. R Never lie under the vehicle. R Do not start the vehicle and do not release the electric parking brake. R Do not open or close any doors or the trunk lid. #Using the lug wrench, loosen the wheel boltson the wheel you wish to change by about onefull turn. Do not unscrew the screws com-pletely.Position of the jack support points * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. & WARNING Risk of injury from incorrect positioning of the jack If you do not position the jack correctly at the appropriate jacking point of the vehicle, the jack could tip with the vehicle raised. # Only position the jack at the appropriate jacking point of the vehicle. The base of the jack must be positioned vertically under the jacking point of the vehicle. * NOTE Damage to the vehicle due to using an unsuitable jack You can damage the vehicle and, in particular, the high-voltage battery if you use a jack that is not specifically designed for the jack sup­port points of the vehicle. # Only use jacks that are specifically designed for the jack support points, or use an appropriate adapter. * NOTE Risk of damage to the vehicle due to incorrect positioning of the jack If you do not position the jack at the designa­ted jack support points, you could damage your vehicle and, in particular, the high-voltage battery. # Only position the jack at the designated jack support points. # Take the ratchet out of the tire-change tool kit and place it on the hexagon nut of the jack so that the letters "AUF" are visible. # Position support 2 of jack 4 on jack sup­port point 1. # Turn ratchet 3 clockwise until support 2 sits completely on jack support point 1 and the base of the jack lies evenly on the ground. # Turn ratchet 3 until the tire is raised a maxi­mum of 1.2 in (3 cm) from the ground. # Loosen and remove the wheel (/ page 395). Removing a wheel Requirements: R The vehicle is raised (/ page 393). * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. When changing a wheel, avoid applying any force to the brake discs, as this could impair the level of comfort when braking. * NOTE Damage to the wheels' plastic ele­ments when changing a wheel Plastic elements on wheels may be damaged when removing and repositioning the wheel. # Do not raise the wheels by the plastic elements when removing and reposition­ing. * NOTE Damage to threading from dirt on wheel bolts # Do not place wheel bolts in sand or on a dirty surface. # Unscrew the uppermost wheel bolt com­pletely. #Screw alignment bolt 1 into the threadinstead of the wheel bolt.# Unscrew the remaining wheel bolts com­pletely. # Remove the wheel. Installing a new wheel Requirements R The wheel to be changed is removed and the centering pin is screwed in (/ page 395). * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. & WARNING Risk of accident from losing a wheel Oiled, greased or damaged wheel bolt/wheel nut threads or wheel hub/wheel mounting bolt threads can cause the wheel bolts/wheel nuts to come loose. # Never oil or grease the threads. # In the event of damage to the threads, contact a qualified specialist workshop immediately. # Have the damaged wheel bolts or dam­aged hub threads replaced. # Do not continue driving. # Observe the information on the choice of tires (/ page 388). For tires with a specified direction of rotation, an arrow on the side wall of the tire indicates the cor­rect direction of rotation. Observe the direction of rotation when installing. * NOTE Damage to the wheels' plastic ele­ments when changing a wheel Plastic elements on wheels may be damaged when removing and repositioning the wheel. # Do not raise the wheels by the plastic elements when removing and reposition­ing. # Slide the wheel to be mounted onto the cen­tering pin and push it on. & WARNING Risk of injury from tightening wheel bolts and nuts If you tighten the wheel bolts or wheel nuts when the vehicle is raised, the jack could tip. # Only tighten wheel bolts or wheel nuts when the vehicle is on the ground. # Be sure to observe the instructions and safety notes on "Changing a wheel" (/ page 388). # For safety reasons, only use wheel bolts which have been approved by Mercedes-Benz and for the wheel in question. * NOTE Damage to paintwork of the wheel rim when screwing in the first wheel bolt If the wheel has too much play when screwing in the first wheel bolt, the wheel rim paint can be damaged. # Press the wheel firmly against the wheel hub when screwing in the first wheel bolt. # Tighten the wheel bolts evenly in a diagonal pattern in the order indicated until they are finger-tight. # Unscrew and remove the centering pin. # Tighten the last wheel bolt until it is finger-tight. # Lower the vehicle (/ page 397). Lowering the vehicle after a wheel change Requirements: R The new wheel has been mounted (/ page 396). * NOTE Risk of vehicle jack becoming trap­ped by the AIRMATIC system If the AIRMATIC system has released air when raising the vehicle, the jack can become trap­ped when the vehicle is lowered. # Start the drive system. This adapts the vehicle level. # Remove the jack from under the vehicle. # To lower the vehicle: place the ratchet onto the hexagon nut of the jack so that the letters "AB" are visible and turn counter-clockwise. # Tighten the wheel bolts evenly in a diagonal pattern in the order indicated 1 to 5 with an initial maximum force of 59 lb-ft (80 Nm). # Tighten the wheel bolts evenly in a diagonal pattern in the order indicated 1 to 5 with the specified tightening torque of 111 lb-ft (150 Nm). & WARNING Risk of accident due to incor­rect tightening torque The wheels could come loose if the wheel bolts or wheel nuts are not tightened to the prescribed torque. # Ensure that the wheel bolts or wheel nuts are tightened to the prescribed tightening torque. # If you are not sure, do not move the vehi­cle. Contact a qualified specialist work­shop and have the tightening torque checked immediately. # Check the tire pressure of the newly mounted wheel and adjust it if necessary. % The following does not apply if the new wheel is an emergency spare wheel. # Vehicles with a tire pressure monitoring sys­tem: restart the tire pressure monitoring sys­tem (/ page 376). Notes on the emergency spare wheel & WARNING Risk of accident caused by incorrect wheel and tire dimensions The wheel or tire sizes and the tire type of the emergency spare wheel or spare wheel and the wheel to be replaced may differ. The emer­gency spare wheel or spare wheel can signifi­cantly impair driving characteristics of the vehicle. To prevent hazardous situations: # Drive carefully. # Never install more than one emergency spare wheel or spare wheel that differs in size. # Only use an emergency spare wheel or spare wheel briefly. # Do not deactivate ESP®. # Have the emergency spare wheel or spare wheel of a different size replaced at the nearest qualified specialist work­ shop. The new wheel must have the cor­rect dimensions. % The emergency spare wheel is secured in the emergency spare wheel bag in the trunk. Observe the following notes on installing an emer­gency spare wheel: R The maximum permissible speed with an emergency spare wheel installed is 50 mph (80 km/h). R Do not install the emergency spare wheel with snow chains. R Replace the emergency spare wheel after six years at the latest, regardless of wear. R Use the wheel bolts that are included with the emergency spare wheel. R Check the tire pressure of the emergency spare wheel installed. Correct the pressure as necessary. % The specified tire pressure is stated on the label of the emergency spare wheel. % Vehicles with a tire pressure monitoring sys­tem: if an emergency spare wheel is installed, the tire pressure monitoring system cannot function reliably. For a few minutes after an emergency spare wheel is installed, the sys­tem may still display the tire pressure of the removed wheel. Only restart the system again when the emergency spare wheel has been replaced with a new wheel. Be sure to also observe the following further rela­ ted subjects: R Notes on tire pressure (/ page 372) R Tire and Loading Information placard (/ page 377) R Tire pressure table (/ page 373) R Notes on installing tires (/ page 388) R installing an emergency spare wheel (/ page 392) * NOTE Mercedes-AMG vehicles # Observe the notes in the Supplement. You could otherwise fail to recognize dangers. The data stated only applies to vehicles with standard equipment. You can obtain further infor­mation from an authorized Mercedes-Benz Cen­ter. Two-way radios ¦Notes on installing two-way radios & WARNING Risk of accident due to improper work on two-way radios If two-way radios are manipulated or retrofit­ted incorrectly, the electromagnetic radiation from the two-way radios can interfere with the vehicle electronics and jeopardize the operat­ing safety of the vehicle. # You should have all work on electrical and electronic components carried out at a qualified specialist workshop. & WARNING Risk of accident due to improper operation of two-way radios If you use two-way radios in the vehicle improperly, their electromagnetic radiation can disrupt the vehicle's electronics. This is the case in the following situations, in particu­lar: R The two-way radio is not connected to an exterior antenna. R The exterior antenna is installed incor­rectly or is not a low-reflection antenna. This could jeopardize the operating safety of the vehicle. # Have the low-reflection exterior antenna installed at a qualified specialist work­shop. # When operating two-way radios in the vehicle, always connect them to the low-reflection exterior antenna. * NOTE Invalidation of the operating permit due to failure to comply with the instruc­tions for installation and use The operating permit may be invalidated if the instructions for installation and use of two-way radios are not observed. # Only use approved frequency bands. # Observe the maximum permissible out­ put power in these frequency bands. # Only use approved antenna positions. 1 Rear roof area On vehicles with a panoramic sliding sunroof, installing an antenna is not permitted. Use Technical Specification ISO/TS 21609 (Road Vehicles – "EMCs for installation of aftermarket radio frequency transmitting equipment") when retrofitting two-way radios. Comply with the legal requirements for detachable parts. If your vehicle has installing for two-way radio equipment, use the power supply and antenna connectors provided in the pre-installation. Observe the manufacturer's supplements when installing. ¦Two-way radio transmission output The maximum transmission output (PEAK) at the base of the antenna must not exceed the values in the following table. Frequency band and maximum transmission out­put Frequency band Maximum transmis­sion output 2 m frequency band 50 W 144–174 MHz Terrestrial Trunked 10 W Radio (TETRA) 380–460 MHz 70 cm frequency band 35 W 430–470 MHz Frequency band Maximum transmis­sion output Two-way radio 2 W 2G Two-way radio 0.5 W 3G/4G/5G The following devices can be used in the vehicle without restrictions: R two-way radios with a maximum transmission output of 100 mW R two-way radios with transmitter frequencies in the 380–420 MHz frequency band and a maxi­mum transmission output of 2 W (TETRA) R mobile phones (2G/3G/4G/5G) There are no restrictions on positioning the antenna on the outside of the vehicle for the fol­lowing frequency bands: R TETRA R 2G/3G/4G/5G Information on installation clearances Regulatory radio identification of small compo­ nents Manufacturer information about radio-based vehi­cle components can be found using the key phrase "Regulatory radio identification" in the Dig­ital Operator's Manual in the vehicle, on the Inter­net and in the app. Regulatory radio identification – Indonesia and Israel Manufacturer information about radio-based vehi­cle components for Indonesia and Israel can be found using the key phrase "Regulatory radio iden­tification – Indonesia and Israel" in the Digital Operator's Manual in the vehicle, on the Internet and in the app. % These are not small components. Information about small components can be found using the key phrase "Regulatory radio identification of small components". Information on installation clearances of wireless vehicle components can be found using the key Vehicle identification plate phrase "Installation clearances" in the Digital Operator's Manual in the vehicle. Further component-specific information Further component-specific information can be found using the key phrase "further component-specific information" in the Digital Operator's Manual in the vehicle, on the Internet and in the app. Vehicle identification plate (USA only)1Maximum permissible gross vehicle weight2Maximum permissible front axle load3Maximum permissible rear axle load4Paint code5VIN (vehicle identification number)Vehicle identification plate (Canada only) 1 Maximum permissible gross vehicle weight 2 Maximum permissible front axle load 3 Maximum permissible rear axle load 4 Paint code 5 VIN (vehicle identification number) The permissible gross vehicle weight is made up of the vehicle weight, all vehicle occupants and the load. The maximum gross axle weight rating is the maximum weight that can be carried on one axle (front or rear axle). Do not exceed the maximum permissible gross vehicle weight or the maximum gross axle weight rating for the front or rear axle. VIN below the front right-hand seat VIN at the lower edge of the windshield 1Imprinted VIN (vehicle identification number)2Floor covering1VIN (vehicle identification number) as label Notes on operating fluids & WARNING Risk of injury from operating fluids harmful to your health Operating fluids may be poisonous and harm­ful to your health. # Observe the text on the original contain­ers when using, storing or disposing of operating fluids. # Always store operating fluids sealed in their original containers. # Always keep children away from operat­ing fluids. + ENVIRONMENTAL NOTE Pollution of the environment due to irresponsible disposal of operating fluids Incorrect disposal of operating fluids can cause considerable damage to the environ­ment. # Dispose of operating fluids in an environ­mentally responsible manner. Operating fluids include the following: R lubricants R coolant R brake fluid R windshield cleaning agent R climate control system refrigerant Only use products approved by Mercedes-Benz. Damage caused by the use of products that have not been approved for the vehicle is not covered by the Mercedes-Benz warranty or goodwill ges­tures. You can identify operating fluids approved by Mercedes-Benz by the following inscriptions on the container: R MB-Freigabe (e.g. MB-Freigabe 229.51) R MB-Approval (e.g. MB-Approval 229.51) Further information on approved operating fluids is available at the following locations: R in the Mercedes-Benz Specifications for Oper­ating Fluids by entering the designation -at https://bevo.mercedes-benz.com -in the Mercedes-Benz BeVo App R at a qualified specialist workshop Notes on brake fluid Observe the notes on operating fluids (/ page 403). & WARNING Risk of an accident due to vapor pockets forming in the brake system The brake fluid constantly absorbs moisture from the air. This lowers the boiling point of the brake fluid. If the boiling point is too low, vapor pockets may form in the brake system when the brakes are applied hard. This causes the braking effect to be impaired. # Have the brake fluid renewed at the specified intervals. Have the brake fluid regularly replaced at a quali­fied specialist workshop. Only use a brake fluid approved by Mercedes-Benz according to MB-Freigabe or MB-Approval 331.0. Coolant ¦Notes on coolant Observe the notes on operating fluids (/ page 403). & WARNING Risk of fire- and injury from antifreeze If antifreeze comes into contact with hot com­ponent parts in the engine compartment, it may ignite. # Allow the drive system to cool down before you add antifreeze. # Make sure that no antifreeze spills out next to the filler opening. # Thoroughly clean the antifreeze from component parts before starting the vehicle. * NOTE Damage caused by incorrect cool­ant # Only use coolant that has been premixed with the required antifreeze protection. Information on coolant is available at the fol­lowing locations: R In the Mercedes-Benz Specification for Operating Fluids 320.1 -At https://bevo.mercedes-benz.com -In the Mercedes-Benz BeVo app R At a qualified specialist workshop * NOTE Overheating at high outside temper­atures If an inappropriate coolant is used, the cooling system is not sufficiently protected against overheating and corrosion at high outside temperatures. # Only use coolant approved for Mercedes-Benz. # Observe the instructions in the Mercedes-Benz Specifications for Oper­ating Fluids 320.1. Have the coolant regularly replaced at a qualified specialist workshop. Proportion of antifreeze concentrate in the cool­ ing system: R A minimum of 50% (antifreeze protection down to about -35°F (-37°C)) R A maximum of 55% (antifreeze protection down to -49°F (-45°C)) ¦Coolant filling capacity Coolant (EQE 350+) EQE 350+ Capacity Cooling circuit (drive system) 11.6 US qt (11.0 liters) Cooling circuit (high­voltage battery) 13.7 US qt (13.0 liters) Coolant (all other models) All other models Capacity Cooling circuit (drive system) 12.7 US qt (12.0 liters) Cooling circuit (high­voltage battery) 13.7 US qt (13.0 liters) Notes on windshield washer fluid Observe the notes on operating fluids (/ page 403). & WARNING Risk of fire and injury from windshield washer concentrate Windshield washer concentrate is highly flam­mable. If it comes into contact with hot com­ponents, it may ignite. # Make sure that windshield washer con­centrate is not spilled near to the filler opening. * NOTE Damage to the exterior lighting due to unsuitable windshield washer fluid Unsuitable windshield washer fluid may dam­age the plastic surface of the exterior lighting. # Only use windshield washer fluid which is also suitable for use on plastic surfaces, e.g. MB SummerFit or MB WinterFit. * NOTE Blocked spray nozzles caused by mixing windshield washer fluids # Do not mix MB SummerFit and MB Win­terFit with other windshield washer flu­ids. Do not use distilled or de-ionised water. Other­wise, the fill level sensor may be triggered errone­ously. Recommended windshield washer fluid: R Above freezing point: e.g. MB SummerFit R Below freezing point: e.g. MB WinterFit For the correct mixing ratio, refer to the informa­ tion on the antifreeze container. Mix washing water with windshield washer fluid all year round. Windshield washer system Washer fluid reservoir capacity Model Filling volume All models Maximum 3.9 US qt (3.7 l) Refrigerant ¦Notes on refrigerant Observe the notes on operating fluids (/ page 403). % Your vehicle's climate control system may be filled with R-134a or R-1234yf refrigerant. R-1234yf refrigerant should be used only for certain vehicle models. * NOTE Damage due to incorrect refrigerant If a non-approved refrigerant is used, the cli­mate control system may be damaged. # Use only the refrigerant approved for your vehicle. * NOTE Damage to the climate control sys­tem due to incorrect refrigerant compres­sor oil # Only use refrigerant compressor oil that has been approved by Mercedes-Benz. # Do not mix the approved refrigerant compressor oil with a different refriger­ant compressor oil. Work on the climate control system may be car­ried out only at a qualified specialist workshop. All applicable regulations as well as SAE standard J639 must be adhered to. The information label for the climate control sys­tem regarding the refrigerant type and the refrig­erant compressor oil (PAG oil) is located on the inside of the hood. Refrigerant information label (example: R-134a) 1 Hazard and service warning symbols 2 Refrigerant filling capacity 3 Applicable standards 4 PAG oil part number 5 Global warming potential of refrigerant used 6 Refrigerant type Refrigerant information label (example: R-1234yf) 1 Hazard and service warning symbols 2 Refrigerant filling capacity 3 Applicable standards 4 PAG oil part number 5 Global warming potential of refrigerant used 6 Refrigerant type Symbols 1 indicate the following: R Possible dangers R Have maintenance work carried out at a quali­ fied specialist workshop ¦Filling capacity for refrigerant and PAG oil Refrigerant filling capacity Model Refrigerant EQE 350+ 33.5 ± 0.4 oz (950 ± 10 g) All other models 31.4 ± 0.4 oz (890 ± 10 g) Filling capacity for PAG oil Model PAG oil All models 5.6 ± 0.4 oz (160 ± 10 g) Vehicle dimensions The heights specified may vary as a result of the following factors: R Tires R Load R Condition of the suspension R Optional equipment Vehicle dimensions All models Vehicle length Vehicle width includ­ing outside mirrors Wheelbase Turning radius Vehicle height Model EQE 350+ All other models Weights and loads 196.7 in (4995 mm) 82.8 in (2103 mm) 122.8 in (3120 mm) 41.0 ft (12.5 m) Vehicle height 59.5 in (1511 mm) 59.6 in (1513 mm) Bear in mind that items of optional equipment increase the curb weight and reduce the payload. Vehicle-specific weight information can be found on the vehicle identification plate. Also observe the notes on loading the vehicle (/ page 119). High-voltage battery Energy content and charging times All models Type Usable energy content Charging time – mode 3 with 9.6 kW charging capacity Charging time – mode 4 with 170 kW charging capacity Lithium-ion 90.5 kWh Approx. 9 h 30 min Approx. 32 min –Mode 2 and mode 3 charging times apply to AC charging from 10 % to 100 % of the usable energy content. Charging time –mode 4 applies to DC charging from 10 % to 80 % of the usable energy content. The time taken to charge the battery depends on the state of charge of the battery, the ambient temperature and the charging capacity of the bat­tery. The charging capacity, in turn, depends on the supply voltage, the current and the type of power supply. The nominal voltage range for your vehicle can be found on the information label in the socket flap(/ page 188). Introduction ¦Notes about display messages Display messages appear on the driver display. Display messages with graphical symbols are sim­plified in the Operator's Manual and may differ from the symbols on the driver display. The driver display shows high-priority display messages in red. Certain display messages are accompanied by a warning tone. Please act in accordance with the display mes­ sages and follow the additional notes in the Oper­ ator's Manual. For some display messages, symbols will also be shown: R Õ Further information R ¨ Hide display message With the left-hand Touch Control, you can select the respective symbol by swiping to the left or right. Pressing Õ displays further information on the central display. Press the ¨ symbol to hide the display message. Display messages to be acknowledged can be hid­den by pressing the back button G or with the left-hand Touch Control. The display messages will then be stored in the message memory. Rectify the cause of a display message as quickly as possible. High-priority display messages cannot be hidden. The driver display will show these display mes­sages continuously until the cause of the display message has been rectified. ¦Calling up saved display messages Driver's display: 4 Service The Message Memory: XX message appears on the driver's display. # Scroll through the display messages by swip­ing upwards or downwards on the left-hand Touch Control. # To exit the display: press the G back but­ton. Occupant safety 6 Restraint System Malfunc­tion Service Required 6 Front Left Malfunction Service Required (example) * The restraint system is malfunctioning (/ page 43). & DANGER Risk of death due to the restraint system malfunctioning Components in the restraint system may be activated unintentionally or not deploy as intended in an accident. In the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended. You may receive an electric shock if you touch the damaged components of the high-voltage on-board electrical system. # Have the restraint system checked and repaired immediately at a qualified specialist workshop. # After an accident, switch off the vehicle immediately. * The corresponding restraint system is malfunctioning (/ page 43). & DANGER Risk of death due to the restraint system malfunctioning Components in the restraint system may be activated unintentionally or not deploy as intended in an accident. In the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended. You may receive an electric shock if you touch the damaged components of the high-voltage on-board electrical system. # Have the restraint system checked and repaired immediately at a qualified specialist workshop. # After an accident, switch off the vehicle immediately. Display messages Possible causes/consequences and MSolutions 6 * The corresponding restraint system is malfunctioning (/ page 43). & WARNING Risk of injury or fatal injury due to a malfunction in the window curtain airbag Left Window Airbag Mal­function Service accident. The window curtain airbag might be triggered unintentionally or might not be triggered at all in the event of an Required (example) # Have the window curtain airbag checked and repaired immediately at a qualified specialist workshop. Front Passenger Airbag Dis­abled See Operator's Man­ * The front passenger airbag and the front passenger knee airbag have been disabled even though an adult or a person of adult stature is on the front passenger seat. If additional forces are applied to the seat, the weight the system ual detects may be too low. & WARNING Risk of injury or fatal injury due to a disabled front passenger airbag If the front passenger airbag is disabled, the front passenger airbag will not be deployed in the event of an accident and cannot perform its intended protective function. A person in the front passenger seat could then, for example, come into contact with the vehicle's interior, espe­ cially if the person is sitting too close to the cockpit. # Make sure, both before and during the journey, that the status of the front passenger airbag is correct. # Stop the vehicle immediately in accordance with the traffic conditions. # Make sure that no objects are trapped under the front passenger seat. # Check the status of automatic front passenger airbag actuation (/ page 53). Display messages Possible causes/consequences and MSolutions # If necessary, consult a qualified specialist workshop immediately. Front Passenger Airbag Enabled See Operator's Manual * The front passenger airbag and the front passenger knee airbag will be enabled while the vehicle is in motion in the following situations: R Even when a child, a person of smaller stature or an object weighing less than the system weight threshold is loca­ted on the front passenger seat R Even when the front passenger seat is not occupied The system may detect objects or forces that are adding to the weight applied to the seat. & WARNING Risk of injury or death when using a child restraint system while the front passenger airbag is ena­bled If you secure a child in a child restraint system on the front passenger seat and the front passenger airbag is ena­bled, the front passenger airbag can deploy in the event of an accident. The child could be struck by the airbag. # Ensure, both before and during the journey, that the status of the front passenger airbag is correct. NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur. # Stop the vehicle immediately in accordance with the traffic conditions. # Make sure that no objects are trapped under the front passenger seat. Display messages # Check the status of automatic front passenger airbag actuation (/ page 53). # If necessary, consult a qualified specialist workshop immediately. PRE-SAFE Inoperative See * The PRE-SAFE® functions are malfunctioning. Operator's Manual # Visit a qualified specialist workshop. PRE-SAFE Pulse Side Inop­ * The PRE-SAFE® Impulse Side system is malfunctioning or inoperative after having already been triggered. erative See Operator's Manual # Visit a qualified specialist workshop. SmartKey Display messages Possible causes/consequences and MSolutions * Have the SmartKey replaced. ® # Visit a qualified specialist workshop. Obtain a New Key Display messages Possible causes/consequences and MSolutions ® Replace Key Battery * The SmartKey battery is discharged. # Replace the battery (/ page 74). ® Key Not Detected (white display message) * The SmartKey is currently undetected. # Change the location of the SmartKey in the vehicle. # Try to start the vehicle. # If the SmartKey is still not recognized, place it in the slot for starting with the SmartKey (/ page 175). # Start the vehicle. ® * The SmartKey can no longer be detected while driving and may no longer be in the vehicle. If the SmartKey is no longer in the vehicle and you switch off the vehicle: R You can no longer start the vehicle. Key Not Detected (red dis­play message) R You cannot centrally lock the vehicle. # Ensure that the SmartKey is in the vehicle. If the SmartKey is in the vehicle and still not recognized: # Stop the vehicle immediately in accordance with the traffic conditions. # Place the SmartKey in the slot for starting the engine with the SmartKey (/ page 175). Display messages ® Initializing Key Please Wait Don't Forget Your Key Place the Key in the Marked Space See Opera-tor's Manual The SmartKey battery is weak or discharged. # Check the battery using the indicator lamp (/ page 72). # Replace the SmartKey battery, if necessary (/ page 74). * The vehicle is processing in order to teach in the new SmartKey. # Wait until processing is complete. * A warning tone also sounds. This message reminds you to take your SmartKey with you when you leave the vehicle. * SmartKey detection is malfunctioning. # Change the location of the SmartKey in the vehicle. # Place the SmartKey in the marked space for starting the engine with the SmartKey (/ page 175). Lights : Check Left Low Beam (example) : Malfunction See Opera­tor’s Manual : Automatic Driving Lights Inoperative * The corresponding light source is defective. # Drive on carefully. # Consult a qualified specialist workshop immediately. % LED light sources: the display message for the corresponding light appears only when all the light-emitting diodes in the light are faulty. * The exterior lighting is malfunctioning. # Visit a qualified specialist workshop. * The light sensor for automatic driving lights is malfunctioning. # Visit a qualified specialist workshop. Display messages Possible causes/consequences and MSolutions : Active Headlamps Inopera­tive * The active headlamps are malfunctioning. # Visit a qualified specialist workshop. : Switch On Headlights * You are driving without low-beam headlamps. # Turn the light switch to the Lor Ãposition. : Switch Off Lights * You are leaving the vehicle and the lights are still switched on. # Turn the light switch to the Ãposition. DIGITAL LIGHT Functions Limited * The DIGITAL LIGHT system is malfunctioning. The lighting system will continue to work even without the functions of the DIGITAL LIGHT system. # Visit a qualified specialist workshop. Adaptive Highbeam Assist Currently Unavailable See Operator's Manual * Adaptive Highbeam Assist is temporarily unavailable. The system limits have been reached (/ page 143). Display messages Possible causes/consequences and MSolutions Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam Assist Now Available display message will appear. # Drive on # Operate the high beam manually until Adaptive High Beam Assist is available again. Adaptive Highbeam Assist * Adaptive Highbeam Assist is malfunctioning. Inoperative # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. # Until then, operate the high beam manually. Adaptive Highbeam Assist * Adaptive Highbeam Assist Plus is temporarily unavailable. Plus Currently Unavailable See Operator's Manual The system limits have been reached (/ page 145). Once the cause of the problem is no longer present, the system will be available again. The Adaptive Highbeam Assist Plus Now Available display message will appear. # Drive on # Operate the high beam manually until Adaptive High Beam Assist Plus is available again. Adaptive Highbeam Assist Plus Inoperative * Adaptive Highbeam Assist Plus is malfunctioning. # Drive on Display messages or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. # Until then, operate the high beam manually. Hazard Warning Light Mal­function * The hazard warning lamp switch is malfunctioning. # Visit a qualified specialist workshop. Climate control Display messages Possible causes/consequences and MSolutions * The high-voltage battery is charging. Pre-entry climate control cannot be switched on. & # Wait until the charging process has achieved a minimum charge. Currently Not Available Charging of the High-volt­age Battery Not Completed Display messages & * The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on. # Charge the high-voltage battery (/ page 188). Currently Not Available Charge High-voltage Bat­ tery & Pre-entry Climate Control Available Again via Smart-Key after Vehicle Start & Pre-entry Climate Control via SmartKey Currently Not Available. High-voltage Bat­tery Low * You have attempted to switch on pre-entry climate control more than three times with the vehicle switched off. # Start the vehicle for ten seconds. Pre-entry climate control is operational again. * The charge of the high-voltage battery is too low. Pre-entry climate control cannot be switched on. # Charge the high-voltage battery (/ page 188). When the high-voltage battery is sufficiently charged, pre-entry climate control will be operational again. Drive system Display messages Possible causes/consequences and MSolutions u Towing Not Permitted See Operator's Manual * The drive system is malfunctioning. # Have the vehicle transported only using a transporter or trailer (/ page 361). ò Acoustic Presence Indica­tor Inoperative * The sound generator (acoustic vehicle warning system) is malfunctioning. No driving noises are being produced. The vehicle may not be heard by other road users. # Drive with particular care. # Visit a qualified specialist workshop. To Switch Off Vehicle Press and Hold Start/Stop Button for at Least 3 Sec­onds or Press 3 Times * You have pressed the start/stop button while the vehicle is in motion. # To switch off the drive system while the vehicle is in motion (/ page 175). Cannot Start Vehicle See Operator's Manual * It is not possible to start the vehicle. A malfunction has occurred in the drive system. # Switch the vehicle off and lock it. Display messages Possible causes/consequences and MSolutions # After waiting for a short time, unlock the vehicle and start it again. # If the display message appears again and the vehicle does not start, consult a qualified specialist workshop. + Check Coolant Level See Operator's Manual * The coolant level is too low. * NOTE Damage to the drive system due to insufficient coolant # Avoid long journeys with insufficient coolant. # Have the cooling system of the drive system checked at a qualified specialist workshop. ÿ * The coolant is too hot. # Stop the vehicle immediately in accordance with the traffic conditions and switch off the drive system. Coolant Stop Switch Off & WARNING Risk of injury due to overheated vehicle Vehicle If you open the hood in the event of an overheated vehicle or fire in the engine compartment, the following situa­tions may occur: R You may come into contact with hot gases. R You may come into contact with other escaping hot operating fluids. # In the event of overheating or fire in the engine compartment, keep the hood closed and call the fire service. # Allow the overheated vehicle to cool down first if you need to open the hood. Display messages ÿ Socket Flap Blocked Open Manually Close Socket Flap Man­ually Anti-Trap Protection Active Close Socket Flap Man­ually Automatic Not Func­tioning # Wait until the drive system has cooled down. # Make sure that the air supply to the vehicle radiator is not obstructed. # Avoiding high loads on the drive system, drive to the nearest qualified specialist workshop. * The cooling system has detected a component malfunction. # Avoiding high loads on the drive system, drive to the nearest qualified specialist workshop. * The socket flap is not opening automatically. An obstruction may be hindering the opening process. # Make sure that no objects are in the opening area. # Open the socket flap again. * The socket flap is not closing automatically. An obstruction may be hindering the closing process. # Make sure that no objects are in the closing area. # Close the socket flap again. * The socket flap is not closing automatically. The motor of the socket flap may be defective. # Close the socket flap manually. # Visit a qualified specialist workshop. Display messages è * You cannot pull away while the charging cable is connected. # Disconnect the charging cable from the vehicle. Charger Cable Connected Not Possible to Unlock Charging Cable See Opera-tor's Manual Vehicle Currently Not Charging… Charging Sta­tion Fault Charging Fault Change Charging Mode See Opera-tor's Manual * The charging cable connector cannot be removed from the charging station's socket. # Press the EMERGENCY OFF switch on the charging station. If the charging cable connector cannot be removed after that: # Request service personnel from the operator of the charging station via the emergency call button or the emer­gency numbers attached to the charging station. * A malfunction has occurred in the charging station or the RFID card is not recognized. # Start the charging process at a different charging station. or # Have the RFID card checked to ensure it is functioning. * A temporary malfunction has occurred in the charging station. # Wait until the malfunction has passed. or # Start the charging process at a different charging station. Display messages AC Charging Inoperative Service Required DC Charging Inoperative Service Required Reduced Drive System Per­formance See Operator's Manual * The charging process cannot be started due to a malfunction. # Visit a qualified specialist workshop. * The charging process cannot be started due to a malfunction. # Visit a qualified specialist workshop. * The drive system is outside the normal operating temperature range, e.g. due to extremely low or high outside temper­atures. Drive system power output is reduced. The yellow _ reduced power output warning lamp is lit. Once the operating temperature of the drive system returns to normal (e.g. after a short trip), the full output will be available again. The display message and the yellow _ reduced power output warning lamp will go out. # Drive on carefully. * The high-voltage battery is not charged sufficiently. Drive system power output is reduced. The yellow _ reduced power output warning lamp is lit. # Drive on carefully. # Charge the high-voltage battery immediately. * If the drive system power output is still reduced, there is a malfunction in the drive system. # Drive on carefully. # Visit a qualified specialist workshop. Charge High-Voltage Bat­tery Vehicle Starting Ability Otherwise Not Guaranteed Wait in READY State Bat­tery Is Warming Up See Operator's Manual Preparing Drive System… Û Battery Too Low Stop Vehi­cle Charge Immediately * Due to a possible decrease in the temperature of the high-voltage battery, the starting ability or the range may decrease significantly until the vehicle is restarted. # Charge the high-voltage battery (/ page 188). * Operational readiness is established õ and the transmission position j is engaged. The high-voltage battery is warmed up to the operating temperature. This process can take a few minutes and may be prolonged if defrosting of the windshield ¬ is activated. The heating process ends when transmission position h is engaged. However, when driving, the output is significantly limited until the high-voltage battery has reached its operating temperature. * The insulation of the drive system is being tested. This process can last for up to ten seconds. * The condition of charge of the high-voltage battery is so low that it is no longer possible to drive the vehicle. The drive system can no longer be restarted. When the drive system is restarted, the message Battery Too Low Stop Vehicle Charge Immediately will appear again. # Stop the vehicle immediately in accordance with the traffic conditions. # Charge the high-voltage battery (/ page 188). Display messages Û Battery Overheated Stop! Everyone Get Out! Out­doors if Possible Û Malfunction Û Malfunction Service Required * The high-voltage battery has overheated. There is a risk of fire. # Stop the vehicle immediately in accordance with the traffic conditions. # If possible, stop the vehicle in the open air and ensure that all vehicle occupants get out. % Supporting vehicle functions may activate automatically, e.g. the air-recirculation mode as part of climate control. # Do not continue driving. # If smoke is present, leave the danger zone and call the fire service immediately. # Consult a qualified specialist workshop even if there are no external signs of a fire. * The drive system is malfunctioning. A warning tone also sounds. # Visit a qualified specialist workshop. * The drive system is malfunctioning. # Visit a qualified specialist workshop. Û Have High-voltage System Checked See Operator's Manual Do Not Restart Vehicle Service Required Û Drive Power and Range Reduced See Operator's Manual * A function restriction has occurred in the drive system. # Visit a qualified specialist workshop. * It is not possible to restart the drive system due to a malfunction. # Do not switch off the drive system; drive on to the nearest qualified specialist workshop. * A malfunction has occurred in the high-voltage battery. Output and range will be severely restricted. # Switch the vehicle off and lock it. # After waiting for a short time, unlock the vehicle and start it again. If the display message appears again: # Drive on carefully. # Fully charge the high-voltage battery (/ page 188). If the output and range are still reduced, there is a malfunction in the drive system. # Drive on carefully. # Visit a qualified specialist workshop. Display messages Cannot Start Vehicle See Operator's Manual Drive Malfunction Achieva­ble Speed Limited Stop Soon Drive Malfunction Achieva­ble Speed Severely Limited See Operator's Manual * It is not possible to start the vehicle. A malfunction has occurred in the drive system. # Switch the vehicle off and lock it. # After waiting for a short time, unlock the vehicle and start it again. # If the display message appears again and the vehicle does not start, consult a qualified specialist workshop. * The drive system is malfunctioning. The maximum vehicle speed is restricted. The drive system will shut off within a few kilometers. # Stop the vehicle immediately in accordance with the traffic conditions and switch off the drive system. Do not con­ tinue driving. # Do not tow the vehicle, stop towing if necessary. # Consult a qualified specialist workshop. * The drive system is malfunctioning. The maximum vehicle speed is restricted. # Visit a qualified specialist workshop. Display messages ô * The condition of charge of the high-voltage battery has dropped into the reserve range. # Charge the high-voltage battery (/ page 188). Reserve Level Charge High-Voltage Battery d Malfunction d Stop Switch Off Vehicle d Malfunction Service Required * The drive system is malfunctioning. The output of your vehicle is restricted. # Visit a qualified specialist workshop. * The drive system is malfunctioning. # Stop the vehicle immediately in accordance with the traffic conditions and switch off the drive system. Do not con­ tinue driving. # Do not tow the vehicle, stop towing if necessary. # Consult a qualified specialist workshop. * The drive system is malfunctioning. # Visit a qualified specialist workshop. Display messages d Performance Extremely Limited High-Voltage Battery Fault No Start in Approx. XXX mi Service Required (yellow display message) High-Voltage Battery Fault No Start in Approx. XXX mi Service Required (red dis­play message) * A malfunction has occurred in the high-voltage battery. Output and range are severely restricted. # Switch the vehicle off and lock it. # After waiting for a short time, unlock the vehicle and start it again. If the display message appears again: # Drive on carefully. # Fully charge the high-voltage battery (/ page 188). If the output and range are still reduced, there is a malfunction in the drive system. # Drive on carefully. # Consult a qualified specialist workshop. * A malfunction has occurred in the high-voltage battery. It will no longer be possible to start the electric drive system after the distance displayed has been covered. # Have the necessary maintenance work on the high-voltage battery carried out at a qualified specialist workshop. * A malfunction has occurred in the high-voltage battery. It will no longer be possible to start the electric drive system after the distance displayed has been covered. # Have the necessary maintenance work on the high-voltage battery carried out immediately at a qualified specialist workshop. * A malfunction has occurred in the high-voltage battery. Do Not Restart Service It will no longer be possible to restart the drive system once it has been switched off. Required # Do not switch off the drive system; drive on to the nearest qualified specialist workshop. Vehicle Display messages * The driver's display is inoperative due to a failed software update. The display message will be shown every time the engine is started. & WARNING Risk of accident due to failure of the driver display In the event that the driver display fails or malfunctions, you will not recognize function restrictions affecting sys­tems relevant to safety. This may impair operating safety. # Park the vehicle safely as soon as possible and notify a qualified specialist workshop. If the driver's display fails, you may not recognize function restrictions affecting systems relevant to safety or the speed display, for example. The operating safety of the vehicle may be impaired (/ page 303). # Have the vehicle checked by a qualified specialist workshop immediately. Display messages d Vehicle Ready to Drive Shutdown Occurs When Locked or After a Few Minutes Restricted Mode Activated Drive Power Reduced Head-up Display Currently Unavailable See Operator's Manual Head-up Display Inopera­tive * You are leaving the vehicle in a ready-to-drive state. # Get out of the vehicle, secure it against rolling away and take the SmartKey with you. # If you do not leave the vehicle, switch off the electrical consumers, e.g. the seat heating. Otherwise, the 12-V bat­ tery may discharge and starting the engine may be possible only with the help of a second battery (jump start). * When the beginner driver mode is activated, the drive power is reduced (/ page 218). * The head-up display is temporarily unavailable. Possible causes: R Malfunctions in the power supply R Signal interference # Stop in accordance with the traffic conditions and switch the vehicle off and on again. # If the display message still appears, consult a qualified specialist workshop. * The head-up display has an internal error. # Visit a qualified specialist workshop. Display messages Head-up Display Bright­ness Currently Reduced See Operator's Manual * The brightness of the head-up display is reduced. Possible causes: R Dirt on the windshield in the camera's field of vision R Faulty exterior brightness signals # Switch on the windshield wipers. # Clean the windshield if necessary. # Switch the vehicle off and switch it back on # If the display message still appears, consult a qualified specialist workshop. Ù Steering Malfunction Drive Carefully Service Required Ù Steering Malfunction Increased Physical Effort See Operator's Manual * A power steering malfunction has occurred. Steering characteristics may be impaired as a result. # Drive on carefully. # Visit a qualified specialist workshop. * The power steering assistance is malfunctioning. & WARNING Risk of an accident due to altered steering characteristics If the power assistance of the steering fails partially or completely, you will need to use more force to steer. # If safe steering is possible, drive on carefully. # Visit or consult a qualified specialist workshop immediately. Display messages Ù Steering Malfunction Stop Immediately See Opera-tor's Manual Ù Rear Axle Steering Cur­rently Malfunctioning Ù Rear Axle Steering Malfunc­tion Service Required * The steering is malfunctioning. Steering capability is significantly impaired. & WARNING Risk of accident if steering capability is impaired If the steering does not function as intended, the vehicle's operating safety is jeopardized. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. * The rear axle steering is temporarily unavailable. The turning radius may become greater. # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. If the display message does not disappear: # Drive on carefully. # Visit a qualified specialist workshop. * The rear axle steering is malfunctioning. The rear axle has no steering capability. The steering wheel may be at an angle when you drive in a straight line. # Adapt your speed and drive on carefully. # Consult a qualified specialist workshop immediately. Ù Rear Axle Steering Malfunc­tion Stop Immediately Snow Chain Mode Maxi­mum Speed Exceeded Ambient Lighting Warning Support Inoperative * The rear axle steering is malfunctioning. The rear axle has no steering capability. The steering wheel may be tilted considerably when you drive in a straight line. Depending on the steering wheel's tilted position, the steering wheel will also vibrate and a continuous warning tone will sound. & WARNING Risk of accident if steering capability is impaired If the steering does not function as intended, the vehicle's operating safety is jeopardized. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. # When stopping, bear the enlarged vehicle width in mind. * The maximum permissible speed for snow chain mode has been exceeded. # Drive more slowly. * The ambient lighting may not provide full visual warning support. # Lock the vehicle and unlock it again after a few minutes. # If the display message appears regularly, contact a qualified specialist workshop. Display messages C M N * At least one door is open. # Close all doors. * The hood is open. & WARNING Risk of accident due to driving with the hood unlocked The hood may open and block your view. # Never release the hood when driving. # Before every trip, ensure that the hood is locked. # Stop the vehicle immediately in accordance with the traffic conditions. # Do not continue driving. # Consult a qualified specialist workshop. * The trunk lid is open. # Close the trunk lid. _ Rear Left Backrest Not Latched (example) ¥ Add Washer Fluid ¥ Washing Fluid Flap Open Windshield Wiper Malfunc­tion * The seat backrest of the corresponding seat is not engaged. # Fold the seat backrest back until it engages. * The washer fluid level in the washer fluid reservoir has dropped below the minimum. # Refill washer fluid (/ page 344). * The washer fluid filler flap is open. # Close washer fluid filler flap (/ page 344). * The windshield wiper is malfunctioning. # Restart the vehicle. If the display message still appears: # Visit a qualified specialist workshop. Transmission Display messages Possible causes/consequences and MSolutions Shift to P Only When Vehi­cle Is Stationary * It is possible to select the park position j only if the vehicle is stationary. # Depress the brake pedal to stop. # Shift the transmission to park position j when the vehicle is stationary. Depress Brake to Shift from P * You have attempted to shift the transmission out of park position j and into another transmission position. # Depress the brake pedal. # Select transmission position h, k or neutral i. To Deselect P or N Depress Brake and Start Vehicle * You have attempted to shift the transmission out of park position j or neutral i and into another transmission posi­tion. # Depress the brake pedal. # Start the vehicle. # Change the transmission position. Depress Brake to Shift to D or R * You have attempted to select transmission position h or k. # Depress the brake pedal. # Select transmission position h or k. Depress Brake to Shift to R * You have attempted to select transmission position k. # Depress the brake pedal. Display messages Possible causes/consequences and MSolutions # Select transmission position k. Service Required Apply Parking Brake to Park * A malfunction has occurred in the emergency power supply to park position j. # Visit a qualified specialist workshop. # Until then, always select park position j manually before you switch off the vehicle. # Before leaving the vehicle, apply the electric parking brake. Risk of Vehicle Rolling Away Driver's Door Open Position P Not Selected * The driver's door is not fully closed and transmission position h, k or neutral i is selected. The vehicle may roll away. # Select park position j when switching off the vehicle. Risk of Vehicle Rolling Away Apply Parking Brake When Parking * The transmission is malfunctioning. Park position j cannot be selected. # Park the vehicle safely. # Use the electric parking brake to secure the vehicle against rolling away. # On gradients, turn the front wheels so that the vehicle will roll towards the curb if it starts moving. Risk of Vehicle Rolling Away N Activated Manually No Automatic Change to P * While the vehicle was at a standstill or driving at very low speed, neutral i was engaged with the drive system or the vehicle switched on. * NOTE Damage to the vehicle due to rolling away When the vehicle is switched off or the driver's door is opened, automatic engagement of park position j is deac­tivated. Display messages Possible causes/consequences and MSolutions The vehicle may roll away. # Be ready to brake. # Do not leave the vehicle unattended. # Depress the brake pedal until the vehicle comes to a standstill. # Engage park position j when the vehicle is stationary with the brake pedal depressed. # To continue driving with the brake pedal depressed, select transmission position h or k. N Automatically Activated Please Shift to Transmis­sion Position Again * Neutral i was automatically engaged when the vehicle was rolling or being driven. % When you open the driver's door in neutral i, park position j will be engaged automatically. # Engage park position j when the vehicle is stationary with the brake pedal depressed. # To continue driving with the brake pedal depressed, select transmission position h or k. N is Engaged Shift to Desired Gear * The accelerator pedal was depressed while the vehicle was rolling or moving in neutral i. # To accelerate the vehicle, select transmission position h or k. Reversing Not Possible Service Required * The transmission is malfunctioning. It is not possible to select transmission position k. # Visit a qualified specialist workshop. Transmission Malfunction Stop * The transmission is malfunctioning. The transmission shifts to neutral i automatically. # Stop the vehicle immediately in accordance with the traffic conditions. Service Required Do Not Change Transmission Posi­tion Auxiliary Battery Malfunc­tion (white display message) # Depress the brake pedal. # Engage park position j. # Consult a qualified specialist workshop. * The transmission is malfunctioning. It is no longer possible to change the transmission position. # If transmission position h is selected, consult a qualified specialist workshop and do not change the transmission position. # For all other transmission positions, park the vehicle safely. # Consult a qualified specialist workshop or breakdown service. * There is a malfunction in the auxiliary battery. # Visit a qualified specialist workshop. # Until then, always select park position j manually before you switch off the vehicle. # Before leaving the vehicle, apply the electric parking brake. Brakes Display messages F (USA only) ! (Canada only) Parking Brake See Opera-tor's Manual * The yellow ! indicator lamp is lit. The electric parking brake is malfunctioning. To apply: # Switch the vehicle off and switch it back on # Apply the electric parking brake manually (/ page 209). If it is not possible to apply the electric parking brake: # Consult a qualified specialist workshop. # Where necessary, also secure the parked vehicle against rolling away. * The yellow ! indicator lamp and the red F (USA only) or ! (Canada only) indicator lamp are lit. The electric parking brake is malfunctioning. To release: # Switch the vehicle off and switch it back on # Release the electric parking brake manually (/ page 209). or # Release the electric parking brake automatically (/ page 209). If it is still not possible to release the electric parking brake: # Do not continue driving. Consult a qualified specialist workshop. * The yellow ! indicator lamp is lit and the red F (USA only) or ! (Canada only) indicator lamp is flashing. The electric parking brake is malfunctioning. The electric parking brake could not be applied or released. # Switch the vehicle off and switch it back on To apply: # Release and then apply the electric parking brake manually (/ page 209). To release: # Apply and then release the electric parking brake manually. If the electric parking brake cannot be applied or the red F (USA only) or ! (Canada only) indicator lamp con­tinues to flash: # Do not continue driving. Consult a qualified specialist workshop. # Where necessary, also secure the parked vehicle against rolling away. * The yellow ! indicator lamp is lit and the red F (USA only) or ! (Canada only) indicator lamp flashes for approximately ten seconds after the electric parking brake has been applied or released. It then remains lit or goes out. The electric parking brake is malfunctioning. If the condition of charge is too low: # Charge the 12 V battery. Display messages To apply: # Apply the electric parking brake manually. If it is not possible to apply the electric parking brake: # Consult a qualified specialist workshop. # Where necessary, also secure the parked vehicle against rolling away. To release: # If the conditions for automatic release are fulfilled and the electric parking brake is not released automatically, release the electric parking brake manually (/ page 209). If it is still not possible to release the electric parking brake: # Do not continue driving. Consult a qualified specialist workshop. F (USA only) ! (Canada only) Release Parking Brake F (USA only) ! (Canada only) Switch on Vehicle to Release the Parking Brake * The red F indicator lamp (USA only) or ! indicator lamp (Canada only) is flashing. The electric parking brake is applied while you are driving: R A condition for automatic release of the electric parking brake has not been fulfilled (/ page 209). R You are performing emergency braking using the electric parking brake (/ page 210). # Check the conditions for automatic release of the electric parking brake. # Release the electric parking brake manually. * The red F (USA only) or ! (Canada only) indicator lamp is lit. You have attempted to release the electric parking brake with the vehicle switched off. # Switch on the vehicle. Display messages $ (USA only) J (Canada only) Brake Immediately $ (USA only) J (Canada only) Malfunction See Opera-tor's Manual * A malfunction has occurred while the HOLD function was activated. A horn may also sound at regular intervals. You cannot start the vehicle system. # Immediately depress the brake pedal firmly until the display message disappears. You cannot start the vehicle system again. * The brake force boosting function is impaired. Hill Start Assist may be impaired. & WARNING Risk of an accident due to a brake system malfunction If the brake system is malfunctioning, braking characteristics may be impaired. # Drive on carefully. # Have the brake system checked immediately at a qualified specialist workshop. $ (USA only) J (Canada only) Malfunction Stop $ (USA only) J (Canada only) Check Brake Fluid Level * The brake force boosting function is impaired and the braking characteristics may be affected. & WARNING Risk of accident and injury if brake force boosting is malfunctioning If brake force boosting is malfunctioning, increased brake pedal force may be necessary for braking. The braking characteristics may be impaired. The braking distance can increase in emergency braking situations. # Stop in a safe location immediately. Do not continue driving. # Consult a qualified specialist workshop. * There is insufficient brake fluid in the brake fluid reservoir. & WARNING Risk of an accident due to low brake fluid level If the brake fluid level is too low, the braking effect and the braking characteristics may be impaired. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. # Do not add brake fluid. Check Brake Pads See * The brakepads have reached the wear limit. Operator's Manual # Visit a qualified specialist workshop. Driving systems Display messages ë * The HOLD function is deactivated because the vehicle is slipping or a condition for activation is not fulfilled. # Reactivate the HOLD function later or check the activation conditions for the HOLD function (/ page 216). Off é * ATTENTION ASSIST is malfunctioning. # Consult a qualified specialist workshop. ATTENTION ASSIST Inoper­ative é ATTENTION ASSIST: Take a Break! h - - - mph Cruise Control Inoperative Cruise Control Off ç - - - mph * ATTENTION ASSIST has detected fatigue or an increasing lack of concentration on the part of the driver (/ page 219). # If necessary, take a break. * Cruise control cannot be activated as not all activation conditions are fulfilled. # Observe the activation conditions for cruise control (/ page 221). * Cruise control is malfunctioning. # Visit a qualified specialist workshop. * Cruise control has been deactivated. If there is an additional warning tone, cruise control has been deactivated automatically (/ page 221). * Active Distance Assist DISTRONIC cannot be activated as not all activation conditions are fulfilled. # Comply with the activation conditions of Active Distance Assist DISTRONIC (/ page 225). Display messages Possible causes/consequences and MSolutions ç Suspended * If you depress the accelerator pedal beyond the setting of Active Distance Assist DISTRONIC, the system will switch to passive mode (/ page 223). ç Off * Active Distance Assist DISTRONIC was deactivated. If a warning tone also sounds, Active Distance Assist DISTRONIC has deactivated automatically (/ page 225). Active Distance Assist Cur­rently Unavailable See Operator's Manual * Active Distance Assist DISTRONIC is temporarily unavailable. The ambient conditions are outside the system limits (/ page 223). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on carefully. or # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. Active Distance Assist Inop­erative * Active Distance Assist DISTRONIC is malfunctioning. Other driving systems and driving safety systems may also be malfunctioning. # Drive on carefully. Active Distance Assist Now Available Active Steering Assist Cur­rently Unavailable See Operator's Manual Active Steering Assist Inop­erative Ø or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. * Active Distance Assist DISTRONIC is operational again. # Switch on Active Distance Assist DISTRONIC (/ page 225). * Active Steering Assist is temporarily unavailable. The ambient conditions are outside the system limits (/ page 230). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on # Check the tire pressure if necessary. * Active Steering Assist is malfunctioning. Active Distance Assist DISTRONIC remains available. # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. * Active Steering Assist has reached the system limits (/ page 230). You have not steered independently for a considerable period of time. # Take over the steering and drive on in accordance with the traffic conditions. Display messages Possible causes/consequences and MSolutions Active Steering Assist Cur­rently Unavailable Due to Multiple Emergency Stops * Active Steering Assist is temporarily unavailable due to multiple emergency stops. # Take over the steering and stop in accordance with the traffic conditions. # Switch the vehicle off and switch it back on Active Steering Assist is available once more. Ø Initiating Emergency Stop * Your hands are not on the steering wheel. Active Steering Assist will initiate an emergency stop (/ page 230). # Put your hands on the steering wheel. Information on canceling an emergency stop (/ page 232). Active Emergency Stop * Active Emergency Stop Assist is temporarily unavailable. Assist Currently Unavaila­ble See Operator's Manual The ambient conditions are outside the system limits (/ page 232). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on or # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. * Vehicles without the Driving Assistance Package: Active Emergency Stop Assist is temporarily unavailable due to multi­ple emergency stops. # Take over the steering and stop in accordance with the traffic conditions. Active Emergency Stop Assist Inoperative Active Lane Change Assist Currently Unavailable See Operator's Manual Active Lane Change Assist Inoperative # Switch the vehicle off and switch it back on Active Emergency Stop Assist is available once more. * Active Emergency Stop Assist is malfunctioning. # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. * Active Lane Change Assist is temporarily unavailable. The ambient conditions are outside the system limits (/ page 234). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on or # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. * Active Lane Change Assist is malfunctioning. # Drive on. or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. Display messages Possible causes/consequences and MSolutions Active Stop & Go Assist Currently Unavailable See still available. * Active Stop-and-Go Assist is temporarily unavailable. Active Distance Assist DISTRONIC and Active Steering Assist are Operator's Manual The ambient conditions are outside the system limits (/ page 223). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on. Active Stop & Go Assist * Active Stop-and-Go Assist is malfunctioning. Inoperative See Operator's Manual Active Stop-and-Go Assist has been deactivated. Active Distance Assist DISTRONIC and Active Steering Assist are still available. # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. Traffic Sign Assist Cur­rently Unavailable See Operator's Manual * Traffic Sign Assist is temporarily unavailable. Once the cause of the problem is no longer present, the system will be available again. # It is possible to continue driving in compliance with the traffic regulations. Traffic Sign Assist Inopera­ * Traffic Sign Assist is malfunctioning. tive # It is possible to continue driving in compliance with the traffic regulations. or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. Display messages Possible causes/consequences and MSolutions # If the display message does not disappear: consult a qualified specialist workshop. Blind Spot Assist Currently * Blind Spot Assist is temporarily unavailable. Unavailable See Operator's Manual The system limits have been reached (/ page 247). Once the cause of the problem is no longer present, the system will be available again. # Drive on or # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. Blind Spot Assist Inopera­ * Blind Spot Assist is malfunctioning. tive # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. Active Blind Spot Assist * Active Blind Spot Assist is temporarily unavailable. Currently Unavailable See Operator's Manual The system limits have been reached (/ page 247). Once the cause of the problem is no longer present, the system will be available again. # Drive on or Display messages Active Blind Spot Assist Inoperative Active Lane Keeping Assist Currently Unavailable See Operator's Manual Active Lane Keeping Assist Inoperative # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. * Active Blind Spot Assist is malfunctioning. # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. * Active Lane Keeping Assist is temporarily unavailable. The ambient conditions are outside the system limits (/ page 251). As soon as the ambient conditions are within the system limits, the system will become available again. # Drive on * Active Lane Keeping Assist is malfunctioning. # Drive on or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. Ø Initiating Emergency Stop Active Lane Keeping Assist Limited Range of Functions See Operator's Manual * Your hands are not on the steering wheel. The Active Lane Keeping Assist will initiate an emergency stop (/ page 251). # Put your hands on the steering wheel. Information on canceling an emergency stop (/ page 232). * Active Lane Keeping Assist is available but restricted. # Drive on. or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. ¸ ð ç Ä Temporarily Unavailable Sensors Dirty * Front and corner radar sensors (hereafter "sensors") are malfunctioning. Possible causes: R The sensors are dirty R Heavy rain or snow R Extended country driving without other traffic, e.g. in the desert Driving systems and driving safety systems may be malfunctioning or temporarily unavailable. The brake system, steer­ing and drive system will continue to function normally. # Drive on carefully. Once the causes of the problem are no longer present, the driving systems and driving safety systems will be available again and the corresponding symbols will be switched off. If the display message does not disappear: # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. # Clean all sensor covers from outside (/ page 212). # Restart the vehicle. áð * The view of the multifunction camera is restricted. Possible causes: R Dirt on the windshield in the field of vision of the multifunction camera R Heavy rain, snow or fog R Fog on the inside of the windshield: in certain weather conditions, fog can form on the inside of the windshield during cold times of year in particular. Ä % This fog on the windshield will be removed automatically within a short time with the aid of a heater. The restric­tion is temporary. Driving systems and driving safety systems may be malfunctioning or temporarily unavailable. The brake system, steer­ing and drive system will continue to function normally. # Drive on carefully. ¬ Ø Ô Once the causes of the problem are no longer present, the driving systems and driving safety systems will be available again and the corresponding symbols will be switched off. If the display message does not disappear: # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. # Clean the windshield, especially in the position of the multifunction camera (/ page 212). # Restart the vehicle. Camera View Reduced See Operator's Manual Display messages Possible causes/consequences and MSolutions Driver Camera View Cur­ * The view of the driver camera is reduced. Possible causes: rently Restricted See Oper­ator's Manual R Objects or stickers are projecting into the driver camera’s field of vision. R The driver camera is dirty. # Keep the driver camera's field of vision free. # Clean the driver camera if necessary. Please comply with the notes on caring for the interior relating to the display (/ page 349). Change the steering * The driver camera cannot capture your line of sight. wheel/ seat position until 6 dots are visible on the upper edge of the screen. # Change the steering wheel and seat position until six dots are visible on the top edge of the screen. The display message will appear again if the driver camera is again unable to detect your line of sight after 30 minutes. The display message will no longer appear if you confirm the display message and the driver camera cannot detect your line of sight during the entire journey. Driver Camera Inoperative See Operator's Manual * The driver camera is malfunctioning. # Visit a qualified specialist workshop. ä Malfunction Drive at Max. 50 mph * AIRMATIC is functioning only to a limited extent. The vehicle's handling characteristics may be affected. * NOTE The tires on the front axle or the fenders could be damaged by large steering movements # Avoid large steering movements while driving and listen for scraping sounds. Display messages Possible causes/consequences and MSolutions # If you hear scraping sounds, pull over and stop the vehicle in accordance with the traffic conditions, and set a higher vehicle level if possible. # Drive in a manner appropriate for the current level, but do not exceed 50 mph (80 km/h). # Visit a qualified specialist workshop. ¢ Drive at Max. 12mph * AIRMATIC is functioning only to a limited extent. The vehicle's handling characteristics may be affected. # The current level is too high. Do not drive at speeds greater than 12 mph (20 km/h). # Visit a qualified specialist workshop. É * You have pulled away despite the vehicle level being too low. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. The vehicle will be raised to the selected vehicle level. STOP Vehicle Level Too # Wait until the display message disappears before pulling away. Low If the display message does not disappear and a warning tone also sounds, AIRMATIC is malfunctioning: # Do not drive at speeds greater than 50 mph (80 km/h) and consult a qualified specialist workshop immediately. * NOTE The tires on the front axle or the fenders could be damaged by large steering movements # Avoid large steering movements while driving and listen for scraping sounds. Display messages É Compressor Is Cooling PARKTRONIC Inoperative See Operator's Manual Active Parking Assist and PARKTRONIC Inoperative See Operator's Manual # If you hear scraping sounds, pull over and stop the vehicle in accordance with the traffic conditions, and set a higher vehicle level if possible. * Due to frequent level changes within a short space of time, the compressor first needs to cool down in order to set the selected vehicle level. When the compressor has cooled down, the vehicle will continue rising to the selected vehicle level. # Drive on in a manner appropriate for the current level. Make sure that there is sufficient ground clearance. * Parking Assist PARKTRONIC is malfunctioning. Once the cause of the problem is no longer present, the system will be available again. # Continue driving while paying attention to the vehicle's surroundings. or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message still appears, consult a qualified specialist workshop. * Vehicles with Active Parking Assist: Active Parking Assist and Parking Assist PARKTRONIC are malfunctioning. Vehicles without Active Parking Assist: Parking Assist PARKTRONIC is malfunctioning. # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message still appears, consult a qualified specialist workshop. Active Parking Assist Limi­ted Availability of Maneu­vering Assistance See Operator's Manual Driving safety systems Display messages ! ÷ Currently Unavailable See Operator's Manual * Active Parking Assist’s maneuvering assistant is temporarily unavailable or only partially available. # Clean all sensors of the parking and camera system (/ page 348). # If the display message still appears, consult a qualified specialist workshop. * ABS and ESP® are temporarily unavailable. Other driving systems and driving safety systems (e.g. BAS) may also be temporarily unavailable. The brake system will continue to operate normally. The braking distance in an emergency braking situation can increase. & WARNING Risk of skidding if ABS and ESP® are malfunctioning The wheels may lock during braking and ESP® does not perform any vehicle stabilization. The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi­tion, other driving safety systems are switched off. # Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 19 mph (30 km/h). Display messages Possible causes/consequences and MSolutions # If the display message does not disappear, consult a qualified specialist workshop immediately. Drive care­fully. ! * ABS and ESP® are malfunctioning. Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning. The brake system will continue to operate normally. The braking distance in an emergency braking situation can ÷ increase. & WARNING Risk of skidding if ABS and ESP® are malfunctioning Inoperative See Operator's Manual The wheels may block during braking and ESP® does not perform any vehicle stabilization. The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi­tion, other driving safety systems are switched off. # Drive on carefully. # Have ABS and ESP® checked immediately at a qualified specialist workshop. ÷ Currently Unavailable See Operator's Manual * ESP® is temporarily unavailable. Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning. ÷ Inoperative See Operator's Manual & WARNING Risk of skidding if ESP is malfunctioning® If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilization. In addition, other driving safety systems are switched off. # Drive carefully on a suitable stretch of road, making slight steering movements at a speed above 19 mph (30 km/h). # If the display message does not disappear, consult a qualified specialist workshop immediately. Drive care­fully. * ESP® is malfunctioning. Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning. The brake system will continue to operate normally. The braking distance in an emergency braking situation can increase. & WARNING Risk of skidding if ESP® is malfunctioning If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilization. In addition, other driving safety systems are switched off. # Drive on carefully. # Have ESP® checked at a qualified specialist workshop. Display messages Possible causes/consequences and MSolutions T * EBD, ABS and ESP® are malfunctioning. Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning. ! & WARNING Risk of skidding if EBD, ABS and ESP® are malfunctioning The wheels may block during braking and ESP® does not perform any vehicle stabilization. The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addi­ ÷ tion, other driving safety systems are switched off. # Drive on carefully. Inoperative See Operator's # Have the brake system checked immediately at a qualified specialist workshop. Manual Active Brake Assist Func­tions Currently Limited See ally available: * For vehicles with the Driving Assistance Package, the following functions may be temporarily unavailable or only parti­ Operator's Manual R Active Brake Assist with cross-traffic function R Evasive Steering Assist R PRE-SAFE® PLUS Vehicles with Blind Spot Assist: PRE-SAFE® PLUS is temporarily unavailable. The ambient conditions are outside the system limits (/ page 236). Vehicles without the Driving Assistance Package: Active Brake Assist is temporarily unavailable. Active Brake Assist Func­tions Limited See Opera-tor's Manual # Drive on carefully. As soon as the ambient conditions are within the system limits, the system will become available again. or # If the display message does not disappear, stop the vehicle in accordance with the traffic conditions and restart the vehicle. * For vehicles with the Driving Assistance Package, the following functions may be temporarily unavailable or only parti­ally available: R Active Brake Assist with cross-traffic function R Evasive Steering Assist R PRE-SAFE® PLUS Vehicles without the Driving Assistance Package: Active Brake Assist is temporarily unavailable or only partially availa­ble. # Drive on carefully. or # Stop the vehicle in accordance with the traffic conditions and restart the vehicle. # If the display message does not disappear: consult a qualified specialist workshop. Mercedes-Benz emergency call system Display messages G * The Mercedes-Benz emergency call system is malfunctioning. The Mercedes me connect system is also malfunction­ing. # Consult a qualified specialist workshop. Inoperative Battery Display messages Possible causes/consequences and MSolutions # 12 V On-board Electrical System Service Required * The 12 V on-board electrical system is malfunctioning. # Consult a qualified specialist workshop immediately. # Stop Vehicle See Opera-tor's Manual * The 12 V battery is no longer being charged and the condition of charge is too low. * NOTE Possible damage to the drive system if you continue driving # Do not continue driving. # Switch on vehicle to charge the 12 V battery # Stop Vehicle To Charge the 12 V Battery Do Not Switch Off Vehicle # Consult a qualified specialist workshop. # Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving. # Switch off the vehicle. # Consult a qualified specialist workshop. * The vehicle is off and the condition of charge of the 12 V battery is too low. # Switch off electrical consumers that are not required. # Drive for 30–60 mins. or # Charge the vehicle at a charging station (/ page 188). * The 12 V battery condition of charge is too low. # Stop the vehicle immediately in accordance with the traffic conditions. Do not continue driving. # Leave the vehicle running # If the display message disappears: drive on. # If the display message does not disappear: consult a qualified specialist workshop. Tire pressure monitor Display messages Tire Pressure Monitor Cur­rently Unavailable * There is interference from a powerful radio signal source As a result, no signals from the tire pressure sensor are being received. The tire pressure monitoring system is temporarily unavailable. The tire pressure monitoring system will restart automatically as soon as the cause has been rectified. # Drive on Tire Pressure Monitor Inop­erative Tire Pressure Monitor Inop­erative Tire Pressure Sen­sors Missing é Wheel Sensor(s) Missing * The tire pressure monitoring system is malfunctioning. & WARNING There is a risk of an accident if the tire pressure monitoring system is malfunctioning The tire pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tires. Tires with insufficient tire pressure may impair the driving characteristics as well as steering and braking. # Have the tire pressure monitoring system checked at a qualified specialist workshop. * The wheels installed do not have suitable tire pressure sensors. The tire pressure monitoring system is deactivated. # Install wheels with suitable tire pressure sensors. * There is no signal from the tire pressure sensor in at least one wheel. No pressure value is displayed for the affected tire. # Have the faulty tire pressure sensor replaced at a qualified specialist workshop. Display messages é * The tire pressure in one or more tires has dropped significantly. The wheel position is displayed. A warning tone also sounds. Check Tires & WARNING Risk of an accident due to insufficient tire pressure R The tires can burst. R The tires can wear excessively and/or unevenly. R The driving characteristics as well as the steering and braking may be greatly impaired. You could then lose control of the vehicle. # Observe the recommended tire pressures. # Adjust the tire pressure if necessary. # Stop the vehicle in accordance with the traffic conditions. # Check the tire pressure (/ page 372) and the tires. é Please Correct Tire Pres­sure * The tire pressure is too low in at least one of the tires, or the difference in tire pressure between the individual wheels is too great. # Check the tire pressure and add air, if necessary. # When the tire pressure is correct, restart the tire pressure monitor (/ page 376). Display messages Possible causes/consequences and MSolutions é * The pressure in one or more tires has dropped suddenly. The wheel position is displayed. & WARNING Risk of an accident from driving with a flat tire Warning Tire Malfunction R The tires can overheat and be damaged. R The driving characteristics as well as the steering and braking characteristics may be greatly impaired. You could then lose control of the vehicle. # Do not drive with a flat tire. # Do not exceed the maximum permissible driving distance in emergency mode and the maximum permissible speed with a flat MOExtended tire. # Observe the notes on flat tires. Notes on flat tires (/ page 353). # Stop the vehicle in accordance with the traffic conditions. # Check the tires. é Tires Overheated * At least one tire is overheating. The affected tires are displayed in red. At temperatures close to the limit value, the tires are displayed in yellow. & WARNING Risk of an accident from driving with overheated tires Overheated tires can burst. Display messages # Reduce speed so that the tires cool down. é * At least one tire is overheating. The affected tires are displayed in red. At temperatures close to the limit value, the tires are displayed in yellow. Reduce Speed & WARNING Risk of an accident from driving with overheated tires Overheated tires can burst. # Reduce speed so that the tires cool down. Driver's display Driver's display with driver camera Overview of indicator and warning lamps Some systems will perform a self-test when the vehicle is switched on. Some indicator and warn­ing lamps may briefly light up or flash. This behav­ior is non-critical. These indicator and warning lamps indicate a malfunction only if they light up or flash after the vehicle has been started or dur­ing a journey. Warning and indicator lamps Occupant safety 6 Restraint system (/ page 476) ü Seat belt (/ page 476) Drive system _ Reduced power (/ page 477) Ú System error (/ page 477) #Electrical malfunction (/ page 477) Vehicle Ù Power steering (yellow) (/ page 478) Ù Power steering (red) (/ page 478) Ù Rear-axle steering (yellow) (/ page 478) Ù Rear-axle steering (red) (/ page 478) Brakes ! Electric parking brake (yellow) (/ page 480) F USA: electric parking brake (red) (/ page 480) ! Canada: electric parking brake (red) (/ page 480) é USA: Recuperative Brake System (/ page 480) J Canada: brakes (yellow)(/ page 480) $ USA: brakes (red) (/ page 480) J Canada: brakes (red) (/ page 480) Driving systems L Distance warning (/ page 483) Ó Active Brake Assist (/ page 483) ê Active Brake Assist (/ page 483) Æ Active Brake Assist (/ page 483) ä AIRMATIC (/ page 483) Driving safety systems ! ABS (/ page 485) ÷ ESP® (/ page 485) å ESP® OFF (/ page 485) Mercedes-Benz emergency call system H Mercedes-Benz emergency call system (/ page 487) Tire pressure monitor h Tire pressure monitoring system (/ page 488) Exterior lighting T Standing lights (/ page 136) L Low beam (/ page 136) K High beam (/ page 137) #! Turn signal lights (/ page 137) R Rear fog light (/ page 136) Symbols on the central display É Drive Away Assist (/ page 273) L Rear cross traffic warning (/ page 274) º Maneuvering brake function (/ page 275) Occupant safety 6 Restraint system warning lamp ü Seat belt warning lamp flashes * The restraint system red warning lamp is lit while the vehicle is on. The restraint system is malfunctioning (/ page 43). & DANGER Risk of death due to the restraint system malfunctioning Components in the restraint system may be activated unintentionally or not deploy as intended in an accident. In the event of an accident, the high-voltage on-board electrical system may not be deactivated as intended. You may receive an electric shock if you touch the damaged components of the high-voltage on-board electrical system. # Have the restraint system checked and repaired immediately at a qualified specialist workshop. # After an accident, switch off the vehicle immediately. # Drive on carefully. # Note the messages on the driver's display. # Consult a qualified specialist workshop immediately. * The red seat belt warning lamp flashes and an intermittent warning tone sounds. The driver or front passenger has not fastened his/her seat belt while the vehicle is in motion. # Fasten your seat belt (/ page 47). There are objects on the front passenger seat. # Remove the objects from the front passenger seat. Warning/indicator lamp ü Seat belt warning lamp lights up Drive system Warning/indicator lamp * The red seat belt warning lamp lights up for six seconds once the vehicle has started. In addition, an intermittent warning tone may sound. The red seat belt warning lamp reminds the driver and front passenger to fasten their seat belts. # Fasten your seat belt (/ page 47). If you have placed objects on the front passenger seat, the red seat belt warning lamp may remain lit. _ Reduced warning lamp power Ú System error warning lamp * The yellow reduced-power warning lamp is on. Drive system power output is reduced. # Note the messages on the driver's display. *The red system error warning lamp is lit while the vehicle is in a state of operational readiness õ. There is a malfunction in the drive system. # Note the messages on the driver's display. * The red electrical malfunction warning lamp is lit. # There is a malfunction with the electrics. # Note the messages on the driver's display. Electrical malfunction warn­ing lamp Vehicle Warning/indicator lamp Warning/indicator lamp Possible causes/consequences and MSolutions Ù Power steering warning lamp (yellow) * The yellow power steering warning lamp is lit while the vehicle is running. The power assistance or the steering itself is malfunctioning. # Note the messages on the driver's display. Ù Power steering warning lamp (red) * The red power steering warning lamp is lit while the vehicle is running. The power assistance or the steering itself is malfunctioning. & WARNING Risk of accident if steering capability is impaired If the steering does not function as intended, the vehicle's operating safety is jeopardized. Ù Rear axle steering warning lamp (yellow) Ù Rear axle steering warning lamp (red) # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. # Note the messages on the driver's display. * The yellow rear axle steering warning lamp is lit while the vehicle is running. The rear axle steering is malfunctioning. # Note the messages on the driver's display. * The red rear axle steering warning lamp is lit while the vehicle is running. The rear axle steering is malfunctioning. & WARNING Risk of accident if steering capability is impaired If the steering does not function as intended, the vehicle's operating safety is jeopardized. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. # Note the messages on the driver's display. Brakes F Electric parking brake indi­cator lamp (red) (USA only) ! Electric parking brake indi­cator lamp (red) (Canada only) ! The electric parking brake (yellow) indicator lamp *The red electric parking brake indicator lamp flashes or is lit. The yellow electric parking brake indicator lamp is also lit in the event of a malfunction. # Note the messages on the driver's display. é Recuperative Brake System warning lamp (USA only) J Brakes warning lamp (yel­low) (Canada only) *The yellow é warning lamp (USA only) or the yellow J brake warning lamp (Canada only) is lit while the vehicle is running. & WARNING Risk of an accident due to a brake system malfunction If the brake system is malfunctioning, braking characteristics may be impaired. # Drive on carefully. # Have the brake system checked immediately at a qualified specialist workshop. The Hill Start Assist may be malfunctioning. # Adjust your speed and drive on carefully, leaving a suitable distance to the vehicle in front. # If the driver's display shows a display message, observe it. # Visit a qualified specialist workshop. $ Brake warning lamp (USA only) J Brake system warning lamp (Canada only) * The red brake warning lamp is lit while the vehicle is running. Possible causes: R The brake force boosting is malfunctioning and the braking characteristics may be affected. R There is insufficient brake fluid in the brake fluid reservoir. # Note the messages on the driver's display. & WARNING Risk of accident and injury if brake force boosting is malfunctioning If brake force boosting is malfunctioning, increased brake pedal force may be necessary for braking. The braking characteristics may be impaired. The braking distance can increase in emergency braking situations. # Stop in a safe location immediately. Do not continue driving. # Consult a qualified specialist workshop. & WARNING Risk of an accident due to low brake fluid level If the brake fluid level is too low, the braking effect and the braking characteristics may be impaired. # Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions. Do not continue driving under any circumstances. # Consult a qualified specialist workshop. # Do not add brake fluid. Driving systems Warning/indicator lamp L Warning lamp for distance warning function * The red distance warning lamp lights up while the vehicle is in motion. The distance to the vehicle in front is too small for the speed selected. If there is an additional warning tone, you are approaching an obstacle at too high a speed. # Be prepared to brake immediately. # Increase the distance. Function of Active Brake Assist (/ page 236). Ó Active Brake Assist warning lamp ê Active Brake Assist warning lamp * The Active Brake Assist warning lamp is on. Due to dirty sensors or a malfunction, the system is not available or the range of functions is restricted. # Note the messages on the driver's display. * The Active Brake Assist warning lamp is on. The system is switched off or the range of functions has been automatically restricted. This may be the case if the driver is not wearing a seat belt or another driving system has been activated. # Observe the notes on Active Brake Assist (/ page 236). Warning/indicator lamp Æ * The Active Brake Assist warning lamp is on. After you drive off, the system's range of functions will be restricted due to the teach-in process. Depending on the ambient conditions, the teach-in process may take a few minutes. Active Brake Assist warning lamp # Observe the notes on Active Brake Assist (/ page 236). ä Suspension warning lamp (yellow) ä Suspension warning lamp (red) * The yellow AIRMATIC warning lamp is lit. A malfunction has occurred in AIRMATIC. # Note the messages on the driver's display. * The red AIRMATIC warning lamp is lit. A malfunction has occurred in AIRMATIC. * NOTE The vehicle's driving characteristics will have changed significantly. # Consult a qualified specialist workshop. # Note the messages on the driver's display. # Visit a qualified specialist workshop. Driving safety systems Warning/indicator lamp ! ABS warning lamp ÷ ESP® warning lamp flashes * The yellow ABS warning lamp is lit while the vehicle is running. ABS is malfunctioning. If an additional warning tone sounds, EBD is malfunctioning. Other driving systems and driving safety systems may also be malfunctioning. # Note the messages on the driver's display. & WARNING There is a risk of skidding if EBD or ABS is malfunctioning The wheels may lock during braking. The steerability and braking characteristics are heavily impaired and the braking distance may increase. In addition, other driving safety systems are switched off. # Drive on carefully. # Have the brake system checked immediately at a qualified specialist workshop. * The yellow ESP® warning lamp flashes while the vehicle is in motion. One or more wheels have reached their grip limit (/ page 214). # Adapt your driving style to suit the road and weather conditions. Warning/indicator lamp Possible causes/consequences and MSolutions ÷ * The yellow ESP® warning lamp is lit while the vehicle is running. ESP® is malfunctioning. Other driving systems and driving safety systems (e.g. BAS) may also be malfunctioning. ESP® warning lamp lights up # Note the messages on the driver's display. & WARNING Risk of skidding if ESP® is malfunctioning If ESP® is malfunctioning, ESP® cannot carry out vehicle stabilization. In addition, other driving safety systems are switched off. # Drive on carefully. # Have ESP® checked at a qualified specialist workshop. å * The yellow ESP® OFF warning lamp is lit while the vehicle is running. ESP® is deactivated. Other driving systems and driving safety systems may also be inoperative. ESP® OFF warning lamp & WARNING Risk of skidding when driving with ESP® deactivated ESP® does not act to stabilize the vehicle. The availability of further driving safety systems is also limited. # Drive on carefully. # Deactivate ESP® only for as long as the situation requires. Warning/indicator lamp If ESP® cannot be activated, ESP® is malfunctioning. # Have ESP® checked immediately at a qualified specialist workshop. # Observe the notes on deactivating ESP® (/ page 214). Mercedes-Benz emergency call system Warning/indicator lamp *The Mercedes-Benz emergency call system is malfunctioning. The Mercedes me connect system is also malfunctioning. H # Visit a qualified specialist workshop. Mercedes-Benz emergency call system warning lamp Tire pressure monitor Warning/indicator lamp Warning/indicator lamp Possible causes/consequences and MSolutions h Tire pressure monitoring system warning lamp flashes *The yellow tire pressure monitor warning lamp (pressure loss/malfunction) flashes for approximately one minute and then remains lit. The tire pressure monitoring system is malfunctioning. & WARNING There is a risk of an accident if the tire pressure monitoring system is malfunctioning The tire pressure monitoring system cannot issue a warning if there is pressure loss in one or more of the tires. Tires with insufficient tire pressure may impair the driving characteristics as well as steering and braking. # Have the tire pressure monitoring system checked at a qualified specialist workshop. h Tire pressure monitoring system warning lamp lights up *The yellow tire pressure monitoring system warning lamp (pressure loss/malfunction) is lit. The tire pressure monitoring system has detected tire pressure loss in at least one of the tires. & WARNING Risk of an accident due to insufficient tire pressure R The tires can burst. R The tires can wear excessively and/or unevenly. R The driving characteristics as well as the steering and braking may be greatly impaired. You could then lose control of the vehicle. # Observe the recommended tire pressures. # Adjust the tire pressure if necessary. # Stop the vehicle in accordance with the traffic conditions. # Check the tire pressure and the tires. Active Blind Spot Assist Setting the sensitivity............................. 253 Activating/deactivating.......................... 250 Active Parking Assist (SmartKey) battery......................................... 74 Brake application................................... 249 Automatic braking function.................... 269 4MATIC, All-wheel drive Exit warning........................................... 247 Cross traffic warning.............................. 274 All-wheel distribution.............................. 188 Function................................................ 247 Drive Away Assist................................... 273 Function................................................ 188 Active Brake Assist Exiting a parking space.......................... 267 Function................................................ 236 Function................................................ 264 Setting................................................... 241 Maneuvering brake function................... 275 A/C function Parking.................................................. 266 Active Distance Assist DISTRONIC Activating/deactivating (operating Pausing.................................................. 268 Activating/deactivating.......................... 225 unit)....................................................... 159 Active Emergency Stop Assist................ 232 Active Service System PLUS, MBUX.................................................... 160 Active Lane Change Assist..................... 234 ASSYST PLUS.............................................. 340 ABS, Anti-lock braking system...................... 214 Calling up a speed................................. 225 Active Speed Limit Assist............................. 227 Function................................................ 223 Acceleration increase Active Steering Assist Increases/decreases the speed............. 225 Notes..................................................... 176 Activating/deactivating.......................... 232 Route-based speed adaptation............... 228 Accelerator pedal, Haptic Active Emergency Stop Assist................ 232 Storing a speed...................................... 225 accelerator pedal......................................... 183 Active Lane Change Assist..................... 234 Active headlamps......................................... 139 Function................................................ 230 Accident prevention..................................... 273 Active Lane Change Assist Active Stop-and-Go Assist Accident, emergency call............................. 337 Activating/deactivating.......................... 236 Function................................................ 230 Acoustic presence indicator, Sound gen-Function................................................ 234 Adaptive cruise control, Active Distance erator.......................................................... 171 Active Lane Keeping Assist Assist DISTRONIC........................................ 228 Activating/deactivating the acoustic lock-Activating/deactivating.......................... 253 Adaptive Highbeam Assist, High beam ing verification signal...................................... 73 Function................................................ 251 Activating/deactivating.......................... 144 Function................................................ 143 Adaptive Highbeam Assist Plus Activating/deactivating.......................... 146 Function................................................ 145 After-sales service, ASSYST PLUS................. 340 Air bag, Occupant safety Automatic front passenger air bag shu toff.......................................................... 52 Deployment............................................. 43 Front air bag............................................ 48 Overview.................................................. 48 PASSENGER AIR BAG indicator lamps...... 53 Reduced protection.................................. 51 Warning lamp........................................... 43 Air conditioning menu Air distribution....................................... 161 Calling up.............................................. 159 Climate control...................................... 160 Fragrance system.................................. 163 Front climate control.............................. 159 Ionization............................................... 163 Rear passenger compartment climate control................................................... 162 Selecting climate modes........................ 160 Air distribution MBUX multimedia system....................... 161 Setting........................................... 156, 157 Air freshener system.................................... 163 Air inlet........................................................ 344 Air pressure................................................. 372 Air suspension, AIRMATIC............................ 253 Air vents Setting................................................... 169 Air/water duct............................................. 344 Airbag Protection................................................ 50 Airflow Setting........................................... 156, 157 AIRMATIC Air suspension....................................... 253 Vehicle levels......................................... 253 Alarm system, ATA....................................... 100 Alternative route.......................................... 318 Ambient lighting........................................... 147 AMG TRACK PACE Configuring............................................ 311 Drag Race.............................................. 310 Function................................................ 308 Telemetry display................................... 311 Track Race............................................. 308 Animals, Pets in the vehicle............................ 71 Anti-lock braking system, ABS...................... 214 Anti-theft alarm system, ATA......................... 100 Anti-theft protection, ATA Immobilizer............................................ 100 Approval numbers........................................ 401 Apps, Mercedes me Mercedes me calls................................. 330 Mercedes me connect........................... 333 Assistance system, Driving safety system..... 213 ASSYST PLUS Battery disconnection periods................ 341 Service interval display.......................... 340 Service requirements............................. 340 ATA Deactivating the alarm........................... 101 Function................................................ 100 Interior protection.................................. 102 Tow-away alarm..................................... 101 Tow-away protection.............................. 102 ATA (anti-theft alarm system) Interior protection function..................... 102 ATTENTION ASSIST, Attention assistant Setting................................................... 220 Attention assistant, ATTENTION ASSIST........ 219 Authorized Mercedes-Benz Service Center..... 34 Authorized workshop...................................... 34 Automatic car wash...................................... 344 Automatic car wash mode.................... 344, 346 Automatic climate control............................ 160 Automatic distance control, Active Dis­ tance Assist DISTRONIC............................... 223 Automatic driving lights................................ 137 Automatic emergency call, Mercedes- Benz emergency call system......................... 337 Automatic front passenger air bag deacti­vation system Function.................................................. 52 Automatic front passenger air bag shutoff PASSENGER AIR BAG indicator lamps...... 53 Automatic measures after an accident, Occupant safety............................................. 57 Automatic mirror folding function................. 154 Automatic seat adjustment........................... 111 Automatic transmission, Transmission Engaging neutral.................................... 187 Autonomous braking.................................... 236 AVAS, Acoustic vehicle alerting system......... 171 Bad weather light......................................... 141 BAS, Brake Assist System............................. 214 Battery (12 V battery) Charging................................................ 360 Jump-starting......................................... 360 Notes..................................................... 359 Replacing............................................... 361 Battery (high-voltage on-board electrical system)........................................................ 408 Beginner driver mode Activating/deactivating.......................... 219 Function................................................ 218 Belt, Seat belt................................................ 44 Blind Spot Assist, Active Blind Spot Assist Activating/deactivating.......................... 250 Function................................................ 247 Bluetooth®................................................... 328 Brake Assist Active Brake Assist................................. 236 Brake Assist System............................... 214 Brake Assist System, BAS............................. 214 Brake fittings................................................ 176 Brake fluid.................................................... 404 Brake force distribution, EBD........................ 216 Brakes ABS (Anti-lock Braking System).............. 214 Active Brake Assist................................. 236 BAS (Brake Assist System)..................... 214 Breaking-in notes................................... 176 Driving tips............................................ 176 EBD (Electronic Brakeforce Distribu­tion)....................................................... 216 HOLD function....................................... 216 Limited braking effect (salt-treated roads).................................................... 176 New/replaced brake linings/brake discs...................................................... 176 Post-collision brake.................................. 57 Recuperation......................................... 179 Braking assistance Brake Assist System............................... 214 Breakdown Changing a wheel................................... 392 Flat tire.................................................. 353 Overview of aids...................................... 22 Tow-starting........................................... 367 Towing away.......................................... 362 Transporting the vehicle......................... 363 Breakdown (Roadside Assistance).................. 28 Breaking-in notes......................................... 176 Calling the customer center for Mercedes-Benz............................................ 330 Calls Mercedes me......................................... 329 Using overhead control panel................. 329 Camera 360° camera......................................... 255 Activating using GPS (reversing cam­era)........................................................ 259 Button................................................... 259 Cleaning................................................ 348 Driver camera........................................ 298 Function................................................ 255 Information............................................ 212 Managing activation points..................... 259 Rear view camera................................... 254 Select view............................................ 259 Car key.......................................................... 72 Car wash...................................................... 344 Car-to-X-Communication Hazard warnings.................................... 322 Care Air/water duct....................................... 344 Automatic car wash............................... 344 Camera.................................................. 348 Car parts............................................... 348 Decorative foil........................................ 348 Display................................................... 349 Exterior lighting...................................... 348 Head-up display..................................... 349 Paint...................................................... 347 Plastic trim............................................ 349 Power washers....................................... 346 Real wood/trim elements...................... 349 Roof lining............................................. 349 Vehicle interior....................................... 349 Vehicle socket for the high-voltage battery................................................... 348 Washing by hand.................................... 347 Cargo tie-down rings.................................... 125 Caring for plastic trim................................... 349 Caring for real wood..................................... 349 Caring for rims............................................. 348 Caring for the steering wheel........................ 349 Caring for trim elements............................... 349 Central display, Home screen Operating.............................................. 295 Central locking system Button..................................................... 77 SmartKey................................................. 73 Change of address......................................... 28 Change of ownership...................................... 28 Changing a wheel Preparation............................................ 392 Raising the vehicle................................. 393 Removing a wheel.................................. 395 Charge level display..................................... 202 Charge level/charge display......................... 202 Charging 12 V battery........................................... 360 At time of departure............................... 203 Charge level display............................... 202 Charging cable control panel.................. 194 Charging station, mode 3....................... 191 Configuring weekly profile...................... 203 Ending the charging process (alternat­ing current, mode 2/3).......................... 198 Ending the charging process (direct current, mode 4).................................... 201 Indicator lamps on vehicle socket........... 195 Mains socket, mode 2............................ 190 Maximum charging current (mains socket).................................................. 193 Notes on the high-voltage battery........... 360 Rapid charging station, mode 4.............. 192 Starting the charging process (alter­nating current, mode 2/3)..................... 195 Starting the charging process (direct current, mode 4).................................... 199 Stowing the charging cable.................... 188 USB port........................................ 120, 132 Wallbox, mode 3.................................... 191 Wirelessly charging a mobile phone........ 132 Charging cable Control panel......................................... 194 Stowing................................................. 188 Charging settings......................................... 203 Checking the coolant level........................... 343 Child safety lock Rear door................................................. 69 Side windows (rear passenger com­partment)................................................ 70 Child seat Basic instructions.................................... 57 Front passenger seat............................... 67 Installing ISOFIX....................................... 63 Risks/dangers......................................... 58 Securing.................................................. 61 Securing on the rear seat with the seat belt.................................................. 66 Securing to the front passenger seat with the seat belt..................................... 68 Top Tether................................................ 64 Children Avoiding dangers in the vehicle................ 58 Basic instructions.................................... 57 Special seat belt retractor........................ 62 Chock.......................................................... 392 City lighting.................................................. 141 Clean varnish............................................... 347 Cleaning Air/water duct....................................... 344 Automatic car wash............................... 344 Car parts............................................... 348 Decorative foil........................................ 348 Paint...................................................... 347 Power washers....................................... 346 Vehicle interior....................................... 349 Vehicle socket for the high-voltage battery................................................... 348 Washing by hand.................................... 347 Cleaning carpets.......................................... 349 Cleaning seat covers.................................... 349 Cleaning the roof lining................................ 349 Cleaning the sensors.................................... 348 Climate control A/C function......................................... 160 Activating/deactivating.......................... 159 Activating/deactivating (rear operat­ing unit)................................................. 159 Activating/deactivating the A/C func­tion (control panel)................................. 159 Air conditioning menu............................ 159 Air distribution............................... 156, 157 Air vents (front)...................................... 169 Air vents (rear passenger compart­ment)..................................................... 170 Airflow........................................... 156, 157 Automatic control.................................. 160 Defrost.................................................. 160 Defrosting the windshield............... 156, 157 Filling capacity for refrigerant and PAG oil................................................... 407 fine particle status display...................... 159 Fragrance system.................................. 163 Immediate pre-entry climate control....... 168 Inserting/removing the flacon (fra­grance system)...................................... 164 Ionization............................................... 163 Notes..................................................... 156 Operating unit................................ 156, 157 Pre-entry climate control for depar­ture time................................................ 166 Pre-entry climate control when the vehicle is unlocked................................. 165 Rear passenger compartment operat­ing unit.................................................. 158 Rear window defroster................... 156, 157 Refrigerant............................................. 406 Removing condensation from the win­dows...................................................... 162 Setting................................................... 159 Switching air-recirculation mode on/off........................................... 162, 163 Synchronization function........................ 162 Temperature.................................. 156, 157 Ventilating with convenience opening....... 95 Windshield heater.................................. 165 COC papers, CERTIFICATE OF CONFORM­ ITY............................................................... 399 Cockpit Overview (central display).......................... 6 Overview (MBUX Hyperscreen)................... 8 Collision detection (parked vehicle) Information............................................ 210 Setting................................................... 211 Combination switch Lights.................................................... 137 Windshield wiper.................................... 149 Commuter route........................................... 318 Component-specific information................... 401 Content sharing menu Overview................................................ 294 Control elements:.......................................... 27 Convenience closing...................................... 95 Convenience opening..................................... 95 Coolant Capacity................................................ 405 Cooling................................................ 156, 157 Copyright License.................................................... 41 Copyrights Trademarks.............................................. 41 Cornering light............................................. 140 Correct use.................................................... 34 Cover, Roller sunblind.................................... 96 Cross traffic (warning), Maneuvering assistant................................. 274 Crosswind Assist, ESP®................................ 215 Cruise control Activating/deactivating.......................... 221 Calling up a speed................................. 221 Function................................................ 221 Requirements:....................................... 221 Setting a speed...................................... 221 Storing a speed...................................... 221 Cup holder, Cup holder Rear passenger compartment................ 130 Customer Assistance Center (CAC)................ 35 Customer Relations Department..................... 35 Damping system ADS PLUS AIRMATIC.............................................. 253 Dashcam Selecting a USB device.......................... 325 Starting/stopping a video recording....... 325 Data processing in the vehicle........................ 36 Data protection rights.................................... 39 Data storage Data protection rights.............................. 39 Electronic control units............................ 36 Event Data Recorder................................ 40 MBUX multimedia system/Mercedes me connect............................................. 39 Online services........................................ 39 Daytime running lamps, Daytime running lamp mode Activating/deactivating.......................... 146 Deactivating the alarm................................. 101 Dealership..................................................... 34 Declaration of conformity Wireless vehicle components................... 32 Decorative foil.............................................. 348 Definitions Tires and loading.................................... 386 Defrost function........................................... 160 Destination entry Entering a POI or address....................... 316 Detecting inattentiveness, ATTENTION ASSIST...................................... 219 Diagnostics connection.................................. 32 DIGITAL LIGHT Activating/deactivating.......................... 143 Active headlamps................................... 139 Assistance functions.............................. 141 Bad weather light................................... 141 City lighting............................................ 141 Cornering light....................................... 140 Enhanced fog light function.................... 140 Highway mode....................................... 140 Overview................................................ 139 Topographical compensation.................. 141 Digital Operator's Manual............................... 24 Dinghy towing, Tow bar system Pulling/towing....................................... 279 DIRECT SELECT lever Engaging drive position.......................... 188 Engaging neutral.................................... 187 Engaging park position........................... 187 Engaging park position automatically...... 187 Engaging reverse gear............................ 186 Function................................................ 186 Disconnect device (high-voltage on-board electrical system)......................................... 172 Display Care...................................................... 349 Û Battery Overheated Stop! Every­ one Get Out! Outdoors if Possible........... 427 ! Currently Unavailable See Oper­ator's Manual......................................... 464 Display (driver's display) Overview of displays............................... 284 Display message Calling up on driver display..................... 409 Display messages ç - - - mph........................................ 450 Û Battery Too Low Stop Vehicle Charge Immediately............................... $ Brake Immediately........................ á Camera View Reduced See Operator's Manual................................. 426 447 460 ÷ Currently Unavailable See Oper­ator's Manual......................................... ¢ Drive at Max. 12mph.................... Û Drive Power and Range Reduced See Operator's Manual............ 465 462 428 h - - - mph........................................ 450 è Charger Cable Connected............. 424 6 Front Left Malfunction Service # 12 V On-board Electrical Sys­tem Service Required............................. ò Acoustic Presence Indicator 469 $ Check Brake Fluid Level................ 448 + Check Coolant Level See Oper­ ator's Manual......................................... 422 Required (example)................................ Û Have High-voltage System Checked See Operator's Manual............ 410 428 Inoperative............................................. 421 : Active Headlamps Inoperative....... 417 : Check Left Low Beam (example)... é Check Tires.................................. 416 472 ® Initializing Key Please Wait............ 415 Ø Initiating Emergency Stop...... 453, 458 ¥ Add Washer Fluid.......................... 438 É Compressor Is Cooling.................. 463 ! Inoperative See Operator's é ATTENTION ASSIST Inoperative..... é ATTENTION ASSIST: Take a 449 ÿ Coolant Stop Switch Off Vehicle.... & Currently Not Available Charge 422 Manual.................................................. ÷ Inoperative See Operator's 465 Break!.................................................... 450 High-voltage Battery............................... 420 Manual.................................................. 466 : Automatic Driving Lights Inoper­ative...................................................... 416 & Currently Not Available Charg­ing of the High-voltage Battery Not T Inoperative See Operator's Manual.................................................. 467 Completed............................................. 419 G Inoperative................................... 469 ® Key Not Detected (red display ëOff................................................ 449 F Release Parking Brake................... 446 message)............................................... 414 F Parking Brake See Operator's ® Replace Key Battery...................... 414 ® Key Not Detected (white dis- Manual.................................................. 443 ô Reserve Level Charge High-Volt­ play message)........................................ 414 d Performance Extremely Limited..... 431 age Battery............................................ 430 6Left Window Airbag Malfunction é Please Correct Tire Pressure......... 472 6 Restraint System Malfunction Service Required (example).................... 411 & Pre-entry Climate Control Avail- Service Required.................................... 410 ä Malfunction Drive at Max. 50 able Again via SmartKey after Vehicle Ù Steering Malfunction Drive mph....................................................... 461 Start...................................................... 420 Carefully Service Required..................... 434 $ Malfunction See Operator's & Pre-entry Climate Control via Ù Steering Malfunction Increased Manual.................................................. 447 SmartKey Currently Not Available. Physical Effort See Operator's Manual.... 434 : Malfunction See Operator’s High-voltage Battery Low........................ 420 Ù Steering Malfunction Stop Manual.................................................. 416 Ù Rear Axle Steering Currently Immediately See Operator's Manual....... 435 d Malfunction Service Required........ 430 Malfunctioning....................................... 435 d Stop Switch Off Vehicle................. 430 Û Malfunction Service Required........ 427 Ù Rear Axle Steering Malfunction É STOP Vehicle Level Too Low.......... 462 $ Malfunction Stop.......................... 448 Service Required.................................... 435 # Stop Vehicle See Operator's d Malfunction.................................. 430 Ù Rear Axle Steering Malfunction Manual.................................................. 469 Û Malfunction.................................. 427 Stop Immediately................................... 436 # Stop Vehicle To Charge the 12 Ø.................................................... 452 _ Rear Left Backrest Not V Battery Do Not Switch Off Vehicle....... 470 ® Obtain a New Key......................... 413 Latched (example)................................. 438 ç Suspended................................... 451 ç Off................................................ 451 é Reduce Speed.............................. 474 : Switch Off Lights........................... 417 : Switch On Headlights.................... 417 Active Blind Spot Assist Inoperative........ 457 Active Lane Keeping Assist Limited # Switch on vehicle to charge the Active Brake Assist Functions Cur-Range of Functions See Operator's 12 V battery........................................... 470 rently Limited See Operator's Manual..... 467 Manual.................................................. 458 F Switch on Vehicle to Release Active Brake Assist Functions Limited Active Parking Assist and the Parking Brake................................... 446 See Operator's Manual.......................... 468 PARKTRONIC Inoperative See Opera­¸ Temporarily Unavailable Sen-Active Distance Assist Currently tor's Manual........................................... 463 sors Dirty............................................... 459 Unavailable See Operator's Manual........ 451 Active Parking Assist Limited Availa­é Tires Overheated........................... 473 Active Distance Assist Inoperative.......... 451 bility of Maneuvering Assistance See u Towing Not Permitted See Oper-Active Distance Assist Now Available...... 452 Operator's Manual................................. 464 Active Emergency Stop Assist Cur-Active Steering Assist Currently ator's Manual......................................... 421 rently Unavailable See Operator's Unavailable Due to Multiple Emer­d Vehicle Ready to Drive Shut- Manual.................................................. 453 gency Stops........................................... 453 down Occurs When Locked or After a Active Emergency Stop Assist Inoper-Active Steering Assist Currently Few Minutes.......................................... 433 ative...................................................... 454 Unavailable See Operator's Manual........ 452 é Warning Tire Malfunction.............. 473 Active Lane Change Assist Currently Active Steering Assist Inoperative........... 452 ¥ Washing Fluid Flap Open............... 438 Unavailable See Operator's Manual........ 454 Active Stop & Go Assist Currently é Wheel Sensor(s) Missing............... 471 Active Lane Change Assist Inoperative... 454 Unavailable See Operator's Manual........ 455 AC Charging Inoperative Service Active Lane Keeping Assist Currently Active Stop & Go Assist Inoperative Required................................................ 425 Unavailable See Operator's Manual........ 457 See Operator's Manual.......................... 455 Active Blind Spot Assist Currently Active Lane Keeping Assist Inoperative... 457 Unavailable See Operator's Manual........ 456 Adaptive Highbeam Assist Currently Unavailable See Operator's Manual........ 417 Adaptive Highbeam Assist Inoperative.... 418 Adaptive Highbeam Assist Plus Cur­rently Unavailable See Operator's Manual.................................................. 418 Adaptive Highbeam Assist Plus Inop­erative................................................... 418 Ambient Lighting Warning Support Inoperative............................................. 436 Auxiliary Battery Malfunction (white display message).................................... 442 Blind Spot Assist Currently Unavaila­ble See Operator's Manual..................... 456 Blind Spot Assist Inoperative.................. 456 Cannot Start Vehicle See Operator's Manual.......................................... 421, 429 Change the steering wheel/ seat position until 6 dots are visible on the upper edge of the screen....................... 461 Charge High-Voltage Battery Vehicle Starting Ability Otherwise Not Guar­anteed................................................... 426 Charging Fault Change Charging Mode See Operator's Manual................. 424 Check Brake Pads See Operator's Manual.................................................. 449 Close Socket Flap Manually Anti-Trap Protection Active.................................... 423 Close Socket Flap Manually Auto­matic Not Functioning............................ 423 Cruise Control Inoperative...................... 450 Cruise Control Off.................................. 450 DC Charging Inoperative Service Required................................................ 425 Depress Brake to Shift from P................ 439 Depress Brake to Shift to D or R............. 439 Depress Brake to Shift to R.................... 439 DIGITAL LIGHT Functions Limited........... 417 Do Not Restart Vehicle Service Required................................................ 428 Don't Forget Your Key............................ 415 Drive Malfunction Achievable Speed Limited Stop Soon................................. 429 Drive Malfunction Achievable Speed Severely Limited See Operator's Man­ual......................................................... 429 Driver Camera Inoperative See Opera-tor's Manual........................................... 461 Driver Camera View Currently Restric­ted See Operator's Manual..................... 461 Front Passenger Airbag Disabled See Operator's Manual................................. 411 Front Passenger Airbag Enabled See Operator's Manual................................. 412 Hazard Warning Light Malfunction.......... 419 Head-up Display Brightness Currently Reduced See Operator's Manual............ 434 Head-up Display Currently Unavaila-PRE-SAFE Inoperative See Operator's Service Required Do Not Change ble See Operator's Manual..................... 433 Manual.................................................. 413 Transmission Position............................. 442 Head-up Display Inoperative................... 433 PRE-SAFE Pulse Side Inoperative See Shift to P Only When Vehicle Is Sta­High-Voltage Battery Fault No Start in Operator's Manual................................. 413 tionary................................................... 439 Approx. XXX mi Service Required Preparing Drive System…....................... 426 Snow Chain Mode Maximum Speed (red display message)............................ 431 Reduced Drive System Performance Exceeded............................................... 436 High-Voltage Battery Fault No Start in See Operator's Manual.......................... 425 Socket Flap Blocked Open Manually....... 423 Approx. XXX mi Service Required (yel-Restricted Mode Activated Drive Tire Pressure Monitor Currently low display message)............................. 431 Power Reduced...................................... 433 Unavailable............................................ 471 Hight-Voltage Battery Fault Do Not Reversing Not Possible Service Tire Pressure Monitor Inoperative........... 471 Restart Service Required........................ 432 Required................................................ 441 Tire Pressure Monitor Inoperative Tire N Automatically Activated Please Shift Risk of Vehicle Rolling Away Apply Pressure Sensors Missing...................... 471 to Transmission Position Again............... 441 Parking Brake When Parking................... 440 To Deselect P or N Depress Brake and N is Engaged Shift to Desired Gear......... 441 Risk of Vehicle Rolling Away Driver's Start Vehicle.......................................... 439 Not Possible to Unlock Charging Door Open Position P Not Selected........ 440 To Switch Off Vehicle Press and Hold Cable See Operator's Manual................. 424 Risk of Vehicle Rolling Away N Activa-Start/Stop Button for at Least 3 Sec-PARKTRONIC Inoperative See Opera-ted Manually No Automatic Change to onds or Press 3 Times............................ 421 tor's Manual........................................... 463 P........................................................... 440 Traffic Sign Assist Currently Unavaila-Place the Key in the Marked Space Service Required Apply Parking Brake ble See Operator's Manual..................... 455 See Operator's Manual.......................... 415 to Park................................................... 440 Traffic Sign Assist Inoperative................. 455 Transmission Malfunction Stop............... 441 Vehicle Currently Not Charging… Charging Station Fault............................ 424 Wait in READY State Battery Is Warm­ing Up See Operator's Manual................ 426 Windshield Wiper Malfunction................ 438 Displaying road names/house numbers....... 318 Displays Home screen......................................... 294 Distance control, Active Distance Assist DISTRONIC........................................ 223 Distance warning, Active Brake Assist.......... 236 DISTRONIC, Active Distance Assist DISTRONIC.................................................. 223 Door Child safety lock (rear door)..................... 69 Closing the convenience doors................. 80 Emergency key......................................... 85 Opening (from the inside)......................... 76 Opening the convenience doors............... 80 Power closing function............................. 85 Recessed door handles............................ 77 Setting convenience doors....................... 84 Unlocking (inside).................................... 76 Door handles Extending/retracting................................ 77 Door operating unit Function seat........................................... 20 DOT, Tire Identification Number (TIN)............ 382 Drag Race Setting................................................... 310 Drinking and driving..................................... 176 Drive Away Assist, Maneuvering assistant..... 273 Drive position Engaging................................................ 188 Drive program display.................................. 185 Drive programs, DYNAMIC SELECT Selecting............................................... 185 Drive system Manual switch-off................................... 172 Starting (emergency operation mode).... 175 Driver camera Activating/deactivating.......................... 299 Function................................................ 298 Driver's display Head-up display..................................... 282 Menus................................................... 282 Notes..................................................... 280 Operating.............................................. 281 Service due date.................................... 340 Status displays....................................... 284 Warning/indicator lamps............ 10, 14, 474 Driver's seat Adjusting (Seat Comfort)........................ 104 Adjusting electrically.............................. 106 Easy entry and exit feature..................... 116 Seat heating.......................................... 113 Driving safety system ABS (Anti-lock Braking System).............. 214 Active Brake Assist................................. 236 ATTENTION ASSIST................................ 219 BAS....................................................... 214 Blind Spot Assist/Active Blind Spot Assist.................................................... 247 Cameras................................................ 212 Cruise control........................................ 221 EBD (Electronic Brakeforce Distribu­tion)....................................................... 216 ESP® (Electronic Stability Program)........ 214 Hill Start Assist...................................... 217 HOLD function....................................... 216 Overview................................................ 213 Radar and ultrasonic sensors................. 212 STEER CONTROL................................... 216 Traffic Sign Assist................................... 241 Your responsibility.................................. 211 Driving system, Driving safety system........... 213 Driving tips Acoustic presence indicator (sound generator).............................................. 171 Drinking and driving............................... 176 Electric mode......................................... 171 General driving tips................................ 176 Rear axle steering.................................. 178 Recuperation......................................... 179 Drowsiness detection, ATTENTION ASSIST.... 219 Duplicate key................................................. 76 Dynamic handling control system, ESP®....... 214 DYNAMIC SELECT Calling up the fuel consumption indi­cator...................................................... 185 Configuring drive program I.................... 185 Displaying vehicle data........................... 185 Drive program display............................ 185 Drive programs...................................... 184 Function................................................ 184 Selecting the drive program................... 185 Easy entry feature Function................................................ 116 Easy exit feature Function................................................ 116 EBD, Electronic Brakeforce Distribution........ 216 ECO Assist Activating/deactivating.......................... 183 Function................................................ 181 ECO display................................................. 179 Electric Intelligence Route with charging stations.................. 318 Electric mode Notes..................................................... 171 Electric parking brake Applying automatically........................... 208 Emergency braking................................ 210 Manual.................................................. 209 Releasing automatically.......................... 209 Electrical fuses............................................. 367 Electronic Stability Program, ESP®............... 214 Emergency First-aid kit (soft sided).......................... 353 Overview of aids...................................... 22 Reflective safety vest............................. 352 Warning triangle..................................... 353 Emergency braking Active Brake Assist................................. 236 Brake Assist System............................... 214 Carrying out........................................... 210 Electric parking brake/handbrake.......... 208 Emergency key Door........................................................ 85 Emergency operation mode Starting the vehicle................................ 175 Emergency release Trunk lid (from inside)............................... 92 Emergency shutoff (high-voltage on-board electrical system)......................................... 172 Emergency start (drive system).................... 367 Emergency stop assistant, Active Emer­gency Stop Assist......................................... 232 Emergency Tensioning Devices Deployment............................................. 43 Energy flow display....................................... 313 Engine Engine number....................................... 401 Switching off, start/stop button............. 204 Engine number............................................. 401 Environmentally friendly driving...................... 25 Error message Driver's display...................................... 409 ESC, Electronic Stability Control................... 214 ESP® Crosswind Assist.................................... 215 Function................................................ 214 Setting................................................... 216 Event Data Recorder...................................... 40 Exit warning................................................. 247 Exiting a parking space Active Parking Assist.............................. 264 Drive Away Assist................................... 273 PARKTRONIC......................................... 260 Exterior lighting Care...................................................... 348 Exterior mirrors Parking position..................................... 153 Factory settings MBUX.................................................... 307 Fatigue detection, ATTENTION ASSIST.......... 219 Favorites...................................................... 300 fine particle status display............................ 159 First aid First-aid kit (soft sided).......................... 353 First-aid kit (soft sided)................................. 353 Flacon.......................................................... 164 Flat tire Changing a wheel................................... 392 MOExtended.......................................... 354 Notes..................................................... 353 TIREFIT kit.............................................. 355 Flat towing, Tow bar system Pulling/towing....................................... 279 Floor mats................................................... 135 Fog lamp...................................................... 137 Fog light (extended range)............................ 140 Foil covering On camera/sensors............................... 212 Radar and ultrasonic sensors................. 212 Fragrance.................................................... 163 Fragrance system Inserting/removing the flacon................ 164 Perfume vial........................................... 164 Free software, Open Source Software............. 41 Frequencies Mobile phone......................................... 400 Two-way radio........................................ 400 Front air bag.................................................. 48 Front headlamps.......................................... 136 Front license plate, mounting......................... 32 Front passenger air bag deactivation sys­tem, PASSENGER AIR BAG OFF...................... 52 Front passenger seat Adjusting (Seat Comfort)........................ 104 Adjusting electrically.............................. 106 Fuel consumption indicator.......................... 185 Function seat................................................. 20 Fuses Cockpit.................................................. 368 Front passenger footwell........................ 368 Fuse assignment diagram....................... 367 Notes..................................................... 367 Rear passenger compartment................ 368 Garage door opener Clearing the memory.............................. 208 Opening/closing a door......................... 208 Problem................................................. 207 Garage door openers Programming buttons............................. 206 Synchronizing the rolling code................ 207 General driving tips...................................... 176 Genuine parts................................................ 25 Glove box Opening/closing.................................... 122 Grab handles Notes..................................................... 103 Handbrake, Electric parking brake................ 208 Handling characteristics Unusual................................................. 370 HANDS-FREE ACCESS................................... 91 Haptic accelerator pedal, Pressure point...... 183 Hazard warning lights................................... 138 Hazard warnings Car-to-X-Communication........................ 322 Head restraint Adjusting (rear passenger compart­ment)..................................................... 110 Adjusting manually (front)...................... 108 Removing/installing (rear passenger compartment)........................................ 110 Head-up display Care...................................................... 349 Function................................................ 282 Memory function................................... 119 Operating.............................................. 283 Switching on/off.................................... 284 Headlamp flashing........................................ 137 Headlamps Automatic.............................................. 136 Heating Activating/deactivating.......................... 159 Center console...................................... 158 Climate control.............................. 156, 157 Rear passenger compartment window.... 157 Seat....................................................... 113 Steering wheel....................................... 116 Windshield............................................. 165 Help call Mercedes-Benz emergency call system.. 337 High beam Activating/deactivating.......................... 137 High-voltage battery Charge level display............................... 202 Charging at time of departure................ 203 Charging cable control panel.................. 194 Charging duration.................................. 408 Charging station, mode 3....................... 191 Configuring weekly profile...................... 203 Disconnect device................................. 172 Ending the charging process (alternat­ing current, mode 2/3).......................... 198 Ending the charging process (direct current, mode 4).................................... 201 Energy flow display................................. 313 Function/notes...................................... 360 Mains socket, mode 2............................ 190 Maximum charging current (mains socket).................................................. 193 Range.................................................... 408 Range maximization............................... 183 Rapid charging station, mode 4.............. 192 Starting the charging process (alter­nating current, mode 2/3)..................... 195 Starting the charging process (direct current, mode 4).................................... 199 Stowing the charging cable.................... 188 Type....................................................... 408 Wallbox, mode 3.................................... 191 High-voltage on-board electrical system Charging cable control panel.................. 194 Disconnect device................................. 172 Indicator lamps on vehicle socket........... 195 Manual disconnection............................ 172 Highway mode............................................. 140 Hill Start Assist............................................ 217 HOLD function, Roll away protection Switching on/off.................................... 217 Home screen Central display....................................... 294 Hood Opening/closing.................................... 342 Identification plate Engine................................................... 401 Refrigerant............................................. 406 Vehicle.................................................. 401 Immediate pre-entry climate control............. 168 Immobilizer.................................................. 100 Indicator/warning lamp................................ 474 Individual drive program Configuring............................................ 185 Inside rearview mirror, Rearview mirror........ 152 Installing Snow chains.......................................... 371 Tires...................................................... 396 Wheels................................................... 396 Intelligent Light System Activating/deactivating.......................... 143 Active headlamps................................... 139 Adaptive Highbeam Assist...................... 143 Adaptive Highbeam Assist Plus............... 145 Assistance functions.............................. 141 Bad weather light................................... 141 City lighting............................................ 141 Cornering light....................................... 140 Enhanced fog light function.................... 140 Highway mode....................................... 140 Overview................................................ 139 Topographical compensation.................. 141 Interior lighting Ambient lighting..................................... 147 Setting................................................... 147 Switch-off delay time.............................. 149 Interior protection........................................ 102 Internet Mercedes me connect........................... 333 Setting up a Wi-Fi hotspot...................... 305 Web browsers........................................ 335 Ionization Activating/deactivating (MBUX multi­media system)....................................... 163 ISOFIX child seat anchor Installing.................................................. 63 Jack............................................................. 392 Jump-start connection.................................. 360 Jump-starting............................................... 360 Key Acoustic locking verification signal........... 73 KEYLESS-GO Deactivating............................................. 73 Locking/unlocking the vehicle................. 77 Problem................................................... 79 Unlocking setting..................................... 73 Knee air bag................................................... 48 Lamp Interior lighting....................................... 147 Lane change assist, Active Lane Change Assist.............................................. 234 Lane Keeping Assist, Active Lane Keeping Assist............................................. 251 Lane recognition Active Lane Change Assist..................... 234 Lane recognition (automatic) Active Lane Keeping Assist..................... 251 Language, System settings Notes..................................................... 307 Setting................................................... 307 Level control AIRMATIC.............................................. 253 Light switch................................................. 136 Lighting Intelligent Light System.......................... 139 Interior lighting....................................... 147 Lights Active headlamps................................... 139 Adaptive Highbeam Assist...................... 143 Adaptive Highbeam Assist Plus............... 145 Assistance functions.............................. 141 Automatic driving lights.......................... 137 Bad weather light................................... 141 City lighting............................................ 141 Combination switch............................... 137 Cornering light....................................... 140 Fog light (extended range)...................... 140 Hazard warning lights............................. 138 High beam............................................. 137 Highway mode....................................... 140 Intelligent Light System.......................... 139 Locator lighting...................................... 146 Low beam.............................................. 136 Parking lamp.......................................... 136 Parking lights......................................... 136 Rear fog light................................. 136, 137 Responsibility for lighting systems.......... 136 Switch-off delay time.............................. 146 Switching the Intelligent Light System on/off................................................... 143 Topographical compensation.................. 141 Turn signal light...................................... 137 Lights assistant High beam............................................. 145 Limited Warranty............................................ 36 Live Traffic Information, Traffic information... 322 Load index Tires...................................................... 384 Load-bearing capacity Tires...................................................... 384 Loading, Stowage areas, Stowage com­partments Cargo tie-down rings.............................. 125 Definitions............................................. 386 Roof luggage rack.................................. 125 Loading guidelines....................................... 119 Loading information table............................. 377 Loads Securing................................................ 119 Locator lighting............................................ 146 Locking/unlocking automatic locking..................................... 80 Doors (from the inside)............................ 76 Emergency key......................................... 85 KEYLESS-GO............................................ 77 Loud sound PRE-SAFE® Sound................................... 56 Low beam Activating/deactivating.......................... 136 Lubricants.................................................... 403 Luggage Securing................................................ 119 Luggage rack............................................... 119 Lumbar support, Lumbar support................. 108 Maintaining safe distance Active Distance Assist DISTRONIC......... 225 Maintenance, ASSYST PLUS Vehicle..................................................... 28 Maintenance Management Notes..................................................... 341 Transferred data..................................... 341 Malfunction Restraint system...................................... 43 Maneuvering Drive Away Assist................................... 273 Maneuvering brake function................... 275 Maneuvering assistance Activating/deactivating.......................... 276 Maneuvering assistant Cross traffic warning.............................. 274 Drive Away Assist................................... 273 Maneuvering brake function................... 275 Maneuvering brake function, Maneuvering assistant................................. 275 Maneuvering support, Maneuvering assis­tant.............................................................. 274 Map Displaying online map contents.............. 322 Displaying weather information.............. 322 Moving................................................... 322 Selecting the map orientation................ 322 Setting the map scale............................ 322 Massage program................................ 112, 113 Maximum full-stop braking, Brake Assist System.............................................. 214 Maximum load rating.................................... 383 Maximum permissible load Calculation example............................... 379 Determining........................................... 378 Maximum tire pressure................................. 383 MBUX Air conditioning menu............................ 159 Snow chain mode.................................. 371 MBUX Interior Assistant Camera & parking.................................. 298 Driver camera........................................ 298 MBUX multimedia system Calling up the Zero Layer........................ 291 Collision detection................................. 210 Drive programs...................................... 185 Factory setting....................................... 307 Home screen......................................... 294 Language settings.................................. 296 Memory Park Assist............................... 279 Mercedes me & Apps............................. 334 Notes..................................................... 286 Operating the Zero Layer........................ 291 Overview................................................ 286 Set collision detection............................ 211 Setting route-based speed adaptation.... 229 Steering wheel heater/seat heating....... 116 Telephone.............................................. 326 Touchscreen.......................................... 295 Zero layer.............................................. 288 MBUX voice assistant Function................................................ 296 Voice prompting..................................... 297 Mechanical key Inserting/removing.................................. 74 Medical aids................................................... 34 Memory function Head-up display..................................... 119 Outside mirrors...................................... 119 Seat....................................................... 119 Steering wheel....................................... 119 Memory Parking Assist Exiting a parking space.......................... 278 Parking.................................................. 278 Parking assistance systems.................... 276 Recording.............................................. 277 Setting................................................... 279 Menus (driver's display) Notes..................................................... 282 Mercedes me App Activating on-demand features................. 27 Mercedes me Apps...................................... 334 Mercedes me calls Arranging a service appointment............ 331 Calling the Mercedes-Benz customer center after automatic accident/ breakdown detection............................. 330 Calls via the overhead control panel....... 329 Information............................................ 330 Mercedes-Benz customer center............ 330 Transferred data..................................... 332 Mercedes me connect Accident/Breakdown Management........ 333 Information............................................ 333 Transferred data..................................... 334 Mercedes-AMG vehicles Notes..................................................... 171 Mercedes-Benz emergency call system Automatic emergency call...................... 337 Data transfer......................................... 339 Information............................................ 336 Manual emergency call.......................... 338 Overview................................................ 337 Mercedes-Benz GenuineParts......................... 25 Message memory......................................... 409 Mirror heater................................................ 165 Mirrors Mirror folding function............................ 154 Outside mirrors...................................... 151 Rearview mirror..................................... 152 Mobile phone Authorizing, Remote Parking Assist......... 272 Frequencies........................................... 400 Maximum transmission output............... 400 Notes on wireless charging.................... 132 Wireless charging (front)........................ 133 Wireless charging (rear passenger compartment)........................................ 134 Model type................................................... 401 MOExtended tires........................................ 354 Mounting license plate, front.......................... 32 Navigation Activating............................................... 313 Announcements..................................... 314 Electric Intelligence................................ 318 Notes..................................................... 313 Route with charging stations.................. 318 Neutral Engaging................................................ 187 Occupant safety, Restraint system Air bag..................................................... 48 Automatic front passenger air bag shu toff.......................................................... 52 Child seat................................................ 57 Pets in the vehicle.................................... 71 PRE-SAFE®.............................................. 56 Seat belt.................................................. 44 On-board diagnostics interface, Diagnos­tics connection.............................................. 32 On-board electronics Two-way radios...................................... 399 On-demand feature........................................ 27 Online services.............................................. 39 Open Source Software, Free software............. 41 Opening the trunk lid using your foot HANDS-FREE ACCESS............................. 91 Opening/closing a door............................... 208 Opening/closing a garage door.................... 208 Operating fluids Brake fluid............................................. 404 Coolant.................................................. 404 Notes..................................................... 403 Refrigerant (air conditioning system)...... 406 Windshield washer fluid.......................... 405 Operating safety Information.............................................. 29 Operator's manual......................................... 26 Operator's Manual digital............................... 24 Outside mirrors Automatic anti-glare mode..................... 152 Automatic mirror folding function........... 154 Blind Spot Assist/Active Blind Spot Assist.................................................... 247 Folding in/out........................................ 151 Memory function................................... 119 Setting................................................... 151 Warning lamp......................................... 247 Overhead control panel.................................. 18 Overview of air bags....................................... 48 Maneuvering brake function................... 275 Post-collision brake, Occupant safety............. 57 PARKTRONIC......................................... 260 Power closing function Paint code................................................... 401 Parking brake, Electric parking brake Door........................................................ 85 Panic alarm, Alarm Electric.................................................. 208 Trunk lid................................................... 88 Activating/deactivating............................ 73 Parking lamp................................................ 136 Power supply Park position Start/stop button.................................. 173 Parking lights............................................... 136 Engaging................................................ 187 Switching on (start/stop button)............ 173 Selecting automatically.......................... 187 Parking position Power washers............................................. 346 Exterior mirrors...................................... 153 Parking Storing the position of the front-Pre-entry climate control Active Parking Assist.............................. 264 passenger outside mirror using activating/deactivating for departure PARKTRONIC......................................... 260 reverse gear........................................... 154 time....................................................... 168 Parking aid At time of departure............................... 166 PARKTRONIC, Parking Assist PARKTRONIC... 260 Active Parking Assist.............................. 264 For departure time................................. 167 PARKTRONIC......................................... 260 PASSENGER AIR BAG immediate.............................................. 168 Status display, front passenger air bag..... 53 Parking Assist when the vehicle is unlocked.................. 165 Active Parking Assist.............................. 264 Payload When vehicle is unlocked....................... 166 PARKTRONIC......................................... 260 Calculation example............................... 379 Pre-heating Determining the maximum..................... 378 Parking Assist PARKTRONIC Pre-entry climate control........................ 165 Activating/deactivating.......................... 263 Permitted towing methods PRE-SAFE®, Anticipatory occupant protection Adjusting warning tones......................... 263 Overview................................................ 361 Function.................................................. 56 Function................................................ 260 Personalization PRE-SAFE® Sound................................... 56 Parking assistance systems, Parking Assist User profiles.......................................... 299 Reverting measures................................. 56 Active Parking Assist.............................. 264 Pets in the vehicle, Occupant safety............... 71 Drive Away Assist................................... 273 Rear view camera PRE-SAFE® Impulse Side, Occupant safety 360° Camera......................................... 254 Deployment............................................. 43 Radar and ultrasonic sensors....................... 212 Function.................................................. 57 Care...................................................... 348 Radio equipment approval numbers.............. 401 Function................................................ 254 PRE-SAFE® PLUS Rain closing function Opening the camera cover..................... 260 Backing up measures............................... 56 Sliding sunroof......................................... 99 Rear window defroster.......................... 156, 157 Function.................................................. 56 Preventative occupant protection system, Rain sensor Rearview mirror Sliding sunroof......................................... 99 Automatic anti-glare mode..................... 152 PRE-SAFE®.................................................... 56 Windshield wiper.................................... 149 Recuperation Profile Range Function................................................ 179 Notes..................................................... 299 Notes..................................................... 280 Setting................................................... 180 Program, Drive programs.............................. 184 Range maximization Reflective safety vest.................................... 352 Protection against collision Activating/deactivating.......................... 183 Refrigerant................................................... 406 Drive Away Assist................................... 273 Function................................................ 183 Maneuvering brake function................... 275 Regulatory radio identification Reading lamp Indonesia............................................... 401 Protection of the environment Interior lighting....................................... 147 Israel..................................................... 401 Driving style............................................. 25 Rear axle steering........................................ 178 Small components................................. 401 Pulling away Rear door (child safety lock) Regulatory radio information Hill Start Assist...................................... 217 Securing.................................................. 69 Installation clearances........................... 401 Rear fog light............................................... 137 Remote Parking Assist Rear passenger compartment climate Authorizing a mobile phone.................... 272 QR code rescue card...................................... 36 control......................................................... 162 Function................................................ 269 Qualified specialist workshop......................... 34 Operating.............................................. 270 Removing/installing wheel trim.................... 393 Replacement key, Duplicate key..................... 76 Reporting safety defects................................. 35 Resetting MBUX reset function.............................. 307 Responsibility Driving safety systems........................... 211 Restraint system Basic instructions for children.................. 57 Function in the event of an accident......... 43 Functionality............................................ 43 Limited protection.................................... 42 Malfunction............................................. 43 Protection................................................ 42 Self-test................................................... 43 Warning lamp........................................... 43 Reverse gear Engaging................................................ 186 Reversing camera Activating via GPS.................................. 259 Managing activation points..................... 259 Roadside Assistance (breakdown).................. 28 Roll away protection, HOLD function............ 216 Roller sunblind Sliding sunroof......................................... 96 Roof luggage rack Loading.................................................. 125 Securing................................................ 125 Route Alternative route.................................... 318 Commuter route..................................... 318 Electric Intelligence................................ 318 Navigation............................................. 314 Selecting a type..................................... 318 Route guidance with augmented reality Activating............................................... 318 Activating/deactivating the traffic light view............................................... 245 Displaying road names/house num­bers....................................................... 318 Switching video on or off........................ 318 Route-based speed adaptation, DISTRONIC Function................................................ 228 Setting................................................... 229 Run-flat characteristics, MOExtended tires... 354 Safety system, Driving safety system............ 213 Seat Adjusting (Seat Comfort)........................ 104 Adjusting electrically.............................. 106 Automatic adjustment............................ 111 Configuring settings............................... 111 Correct driver's seat position................. 103 Folding back the backrest (rear passenger compartment)....................... 124 Locking the backrest (rear passenger compartment)........................................ 125 Lumbar support..................................... 108 Massage program.................................. 112 Memory function................................... 119 Resetting the settings............................ 113 Settings................................................... 20 Side impact air bag.................................. 48 Workout program................................... 112 Seat belt Adjusting the height................................. 47 Automatic tightening................................ 47 Care...................................................... 349 Fastening................................................. 47 Protection................................................ 44 Releasing................................................. 48 Warning lamp........................................... 48 Seat belt adjustment Activating/deactivating............................ 48 Function.................................................. 47 Seat belt warning........................................... 48 Seat belts Activating/deactivating seat belt adjustment.............................................. 48 Reduced protection.................................. 45 Seat heating................................................ 113 Seat height.................................................. 106 Seat ventilation............................................ 114 Seats, Back seat, Rear seat, Through-loading feature Folding the backrest forwards (rear passenger compartment)....................... 122 Selector lever, DIRECT SELECT lever............ 186 Self-test Automatic front passenger air bag shu toff.......................................................... 53 Restraint system...................................... 43 Service center................................................ 34 Service due date.......................................... 340 Service interval display, ASSYST PLUS.......... 340 Service, ASSYST PLUS................................. 340 Shortening the braking distance Brake Assist System............................... 214 Side impact air bag........................................ 48 Side windows Child safety lock (rear passenger compartment).......................................... 70 Closing with SmartKey............................. 95 Convenience closing................................ 95 Convenience opening............................... 95 Opening with the SmartKey...................... 95 Opening/closing...................................... 93 Problem................................................... 96 Size designation Tires...................................................... 384 Skid chains.................................................. 371 Sliding sunroof Automatic functions................................. 99 Closing with SmartKey............................. 95 Opening with the SmartKey...................... 95 Opening/closing...................................... 96 Problem................................................... 99 Rain closing function................................ 99 SmartKey Battery..................................................... 74 Deactivating a function............................ 73 Function.................................................. 72 Key ring attachment................................. 74 Mechanical key........................................ 74 Panic alarm.............................................. 73 Power consumption................................. 73 Problem................................................... 76 Unlocking setting..................................... 73 Smartphone Integration, iPhone® Android Auto.......................................... 335 Apple CarPlay®...................................... 335 Snow chain mode Activating/deactivating.......................... 371 Snow chains................................................ 371 Socket 12 V (front passenger footwell)............... 131 Socket flap, Socket flap................................ 188 Software update System updates..................................... 303 SOS button.................................................. 329 Sound PRE-SAFE® Sound................................... 56 Wheels/tires.......................................... 370 Sound generator, Acoustic presence indi­cator............................................................ 171 Sound menu................................................ 339 Sound settings............................................. 339 Spare parts, Mercedes-Benz GenuineParts..... 25 Spare wheel Emergency spare wheel......................... 398 Special seat belt retractor.............................. 62 Specialist workshop....................................... 34 speed Save, cruise control............................... 225 Save, DISTRONIC................................... 225 Speed control Active Distance Assist DISTRONIC......... 223 Cruise control........................................ 221 Speed rating Tires...................................................... 384 Start-off assist Hill Start Assist...................................... 217 Start/stop button Parking the vehicle................................. 204 Starting the vehicle................................ 175 Switching on the power supply/vehicle.. 173 Starting Start/stop button.................................. 175 Starting the engine Start/stop button.................................. 175 Starting-off aid Drive Away Assist................................... 273 Hill Start Assist...................................... 217 Status display Front passenger air bag............................ 53 Steer Assist Active Steering Assist............................. 230 STEER CONTROL................................... 216 STEER CONTROL, Steer Assist..................... 216 Steering Rear axle steering.................................. 178 Steering wheel Driver's air bag........................................ 48 Manually adjusting................................. 115 Memory function................................... 119 Steering wheel heater Linking to seat heating........................... 116 Stopping Parking the vehicle................................. 204 Stowage space, Stowage areas Center console (front)............................ 121 Stowage spaces Armrest................................................. 120 Center console (front)............................ 120 Door...................................................... 120 Glove box............................................... 120 Substances hazardous to health..................... 29 Suspension AIRMATIC.............................................. 253 Switch-off delay time Exterior.................................................. 146 Interior................................................... 149 Switching air-recirculation mode on/off ............................................................ 162, 163 System settings MBUX reset function.............................. 307 Overview................................................ 303 Technical data Component-specific information............ 401 High-voltage battery............................... 408 Information............................................ 399 Regulatory radio identification................ 401 Regulatory radio identification – Indo­nesia and Israel...................................... 401 Regulatory radio information.................. 401 Vehicle dimensions................................ 407 Telediagnosis Diagnostic data...................................... 341 Telediagnostics Transferred data..................................... 342 Telemetry display Calling up.............................................. 311 Telephone Authorizing a mobile phone, Remote Parking Assist........................................ 272 Bluetooth®............................................. 328 Connecting a mobile phone/Secure Simple Pairing........................................ 328 Menu..................................................... 329 Notes..................................................... 326 Notes on wireless charging (mobile phone)................................................... 132 Operating modes................................... 328 Telephone menu overview...................... 328 Wireless charging (mobile phone, rear passenger compartment)....................... 134 Wirelessly charging a(mobile phone, front)..................................................... 133 Telephony operating modes Bluetooth® telephony............................. 328 Temperature Setting........................................... 156, 157 Temperature grade....................................... 381 THERMATIC Air conditioning control panel................. 156 THERMOTRONIC Air conditioning control panel................. 157 TIN (Tire Identification Number).................... 382 Tire and Loading Information placard............ 377 Tire characteristics....................................... 384 Tire information table................................... 377 Tire labeling Characteristics....................................... 384 DOT, Tire Identification Number (TIN)..... 382 Load index............................................. 384 Load-bearing capacity............................ 384 Maximum tire load................................. 383 Maximum tire pressure.......................... 383 Size designation..................................... 384 Speed rating.......................................... 384 Temperature grade................................. 381 Tire Quality Grading............................... 381 Traction grade........................................ 381 Tread wear grade................................... 381 Tire pressure Checking............................................... 376 Checking manually................................. 374 Maximum............................................... 383 Notes..................................................... 372 Tire pressure table................................. 373 TIREFIT kit.............................................. 355 Tire pressure monitor Function................................................ 375 Tire pressure monitoring system Restarting.............................................. 376 Tire pressure table....................................... 373 Tire Quality Grading...................................... 381 Tire sealant.................................................. 355 Tire tread..................................................... 370 Tire-change tool........................................... 392 Tire-change tool kit Overview................................................ 392 TIREFIT kit, Tire inflation compressor Storage location..................................... 354 Tires Breakdown............................................. 353 Characteristics....................................... 384 Checking............................................... 370 Checking the temperature...................... 376 Checking the tire pressure manually....... 374 Definitions............................................. 386 DOT, Tire Identification Number (TIN)..... 382 Installing................................................ 396 Labeling................................................. 381 Load index............................................. 384 Load-bearing capacity............................ 384 Maximum pressure................................ 383 Maximum tire load................................. 383 MOExtended.......................................... 354 Noise..................................................... 370 Notes on installing................................. 388 Removing............................................... 395 Removing/installing hub cap.................. 393 Removing/installing wheel trim.............. 393 Replacing....................................... 388, 392 Rotating................................................. 391 Selection............................................... 388 Size designation..................................... 384 Snow chains.......................................... 371 Speed rating.......................................... 384 Storing................................................... 392 Temperature grade................................. 381 Tire and Loading Information placard..... 377 Tire pressure table................................. 373 Tire Quality Grading............................... 381 TIREFIT kit.............................................. 355 Traction grade........................................ 381 Tread wear grade................................... 381 Unusual handling characteristics............ 370 Toll system Debiting toll fees.................................... 314 Windshield............................................. 154 Top Tether...................................................... 64 Topographical compensation DIGITAL LIGHT....................................... 141 Intelligent Light System.......................... 141 Touch Control Driver's display...................................... 281 MBUX.................................................... 295 Touch-sensitive controls................................. 27 Touchscreen................................................ 295 Tow bar system Towing away.......................................... 279 Tow-away protection.................................... 102 Tow-starting................................................. 367 Towing Towing methods..................................... 361 Towing away Both axles on the ground....................... 362 Towing eye................................................... 366 Towing methods Overview................................................ 361 Track Race Engaging drive position.......................... 188 Setting................................................... 308 Engaging park position........................... 187 Unfastening................................................... 48 Engaging reverse gear............................ 186 Traction grade.............................................. 381 Transmission position display................. 186 Unlocking setting........................................... 73 Traffic information Transmission positions........................... 186 Updates Activating............................................... 322 Transmission position display....................... 186 System updates..................................... 303 Traffic Jam Assistant, Active Stop-and- Transporting USB port Go Assist..................................................... 230 Vehicle.................................................. 363 Rear passenger compartment................ 132 Traffic light data service Stowage compartments (front)............... 120 Tread wear grade......................................... 381 Display in the driver's display................. 245 User profiles Trunk lid Traffic light view Adding a user......................................... 300 Closing.................................................... 88 Activating/deactivating.......................... 245 Note...................................................... 299 Emergency release (from inside)............... 92 Information............................................ 245 Selecting options................................... 300 HANDS-FREE ACCESS............................. 91 Traffic light data service......................... 245 Limiter..................................................... 93 Traffic light warning/display......................... 241 Opening................................................... 87 Traffic Sign Assist Power closing function............................. 88 Valet service mode Function................................................ 241 Switching the separate locking fea-Activating/deactivating.......................... 218 Setting................................................... 244 ture on/off.............................................. 92 Function................................................ 218 Trailer drawbar, Pulling/towing, Tow Turn signal indicator..................................... 137 Vehicle bar system................................................... 279 Automatic locking.................................... 80 Turn signal light............................................ 137 Transmission Collision detection................................. 210 Two-way radios Correct use.............................................. 34 DIRECT SELECT lever............................. 186 Frequencies........................................... 400 Drive programs...................................... 184 Data storage............................................ 36 Installation............................................. 399 DYNAMIC SELECT button....................... 184 Diagnostics connection............................ 32 Transmission output............................... 400 Emergency key......................................... 85 Equipment............................................... 26 KEYLESS-GO............................................ 77 Limited Warranty...................................... 36 Locking/unlocking (from inside)............... 77 Locking/unlocking emergency key........... 85 Lowering................................................ 397 Maintenance............................................ 28 Medical aids............................................ 34 Problem notification................................. 35 Pulling................................................... 279 QR code rescue card............................... 36 Raising................................................... 393 Set collision detection............................ 211 Starting (emergency operation mode).... 175 Starting (start/stop button)................... 175 Switching off, start/stop button............. 204 Switching on, start/stop button............. 173 Transporting.......................................... 363 ventilating / convenience opening........... 95 Vehicle camera Information............................................ 212 Vehicle data Display, MBUX....................................... 185 Displaying, DYNAMIC SELECT................ 185 Turning circle......................................... 407 Vehicle height........................................ 407 Vehicle length........................................ 407 Vehicle width......................................... 407 Weights................................................. 407 Wheelbase............................................. 407 Vehicle dimensions...................................... 407 Vehicle equipment......................................... 26 Vehicle identification number, VIN................ 401 Vehicle identification plate Model type............................................ 401 Paint code............................................. 401 VIN........................................................ 401 Vehicle key..................................................... 72 Vehicle operation outside the USA or Can­ada................................................................ 28 Vehicle sensors............................................ 212 Vehicle socket Care...................................................... 348 Indicator lamps...................................... 195 Vehicle start Start/stop button.................................. 175 Vehicle tool kit TIREFIT kit.............................................. 354 Towing eye............................................. 366 Ventilating, Convenience opening................... 95 Ventilation................................................... 169 Vents........................................................... 169 VIN, Vehicle identification number Engine compartment.............................. 401 Identification plate................................. 401 Seat....................................................... 401 Vision Removing condensation from the win­dows...................................................... 162 Windshield heater.................................. 165 Voice Control System, MBUX voice assis­tant.............................................................. 296 Warning system, ATA.................................... 100 Warning triangle................................... 352, 353 Warning/indicator lamp ! ABS warning lamp......................... 485 Ó Active Brake Assist warning lamp.............................................. 483, 484 J Brake system warning lamp (Canada only)......................................... 482 $ Brake warning lamp (USA only)..... 482 J Brakes warning lamp (yellow) (Canada only)......................................... 481 ! Electric parking brake indicator lamp (red) (Canada only)........................ 480 F Electric parking brake indicator lamp (red) (USA only)............................. 480 # Electrical malfunction warning lamp...................................................... 478 åESP® OFF warning lamp................ 486 ÷ESP® warning lamp flashes........... 485 ÷ESP® warning lamp lights up......... 486 H Mercedes-Benz emergency call system warning lamp............................. 487 Ù Power steering warning lamp (red)...................................................... 478 Ù Power steering warning lamp (yellow).................................................. 478 Ù Rear axle steering warning lamp (red)...................................................... 479 Ù Rear axle steering warning lamp (yellow).................................................. 479 é Recuperative Brake System warning lamp (USA only)........................ 481 _ Reduced warning lamp power....... 477 6 Restraint system warning lamp...... 476 ü Seat belt warning lamp flashes...... 476 ü Seat belt warning lamp lights up.... 477 ä Suspension warning lamp (red)..... 484 ä Suspension warning lamp (yel­low)....................................................... 484 Ú System error warning lamp........... 477 ! The electric parking brake (yel­low) indicator lamp................................. 480 h Tire pressure monitoring system warning lamp flashes............................. 488 h Tire pressure monitoring system warning lamp lights up........................... 488 L Warning lamp for distance warning function.................................... 483 Warning/indicator lamps Driver's display...................................... 474 PASSENGER AIR BAG............................... 53 Washer fluid Refilling.................................................. 344 Windshield washer fluid.......................... 405 Washing by hand.......................................... 347 Water tank................................................... 344 Weather information..................................... 322 Web browsers Overview................................................ 335 Wedge......................................................... 392 Weight information....................................... 401 Wheel change Installing a new wheel............................ 396 Lowering the vehicle.............................. 397 Removing/installing hub caps................ 393 Wheel rotation............................................. 391 Wheels Breakdown............................................. 353 Care...................................................... 348 Checking............................................... 370 Checking the tire pressure manually....... 374 Checking the tire temperature................ 376 Definitions............................................. 386 DOT, Tire Identification Number (TIN)..... 382 Installing................................................ 396 Load index............................................. 384 Load-bearing capacity............................ 384 Maximum tire load................................. 383 Maximum tire pressure.......................... 383 MOExtended.......................................... 354 Noise..................................................... 370 Notes on installing................................. 388 Removing............................................... 395 Removing/installing hub cap.................. 393 Removing/installing wheel trim.............. 393 Replacing....................................... 388, 392 Rotating................................................. 391 Selection............................................... 388 Size designation..................................... 384 Snow chains.......................................... 371 Speed rating.......................................... 384 Storing................................................... 392 Temperature grade................................. 381 Tire and Loading Information placard..... 377 Tire characteristics................................ 384 Tire labeling........................................... 381 Tire pressure.......................................... 372 Tire pressure monitor............................. 375 Tire Quality Grading............................... 381 TIREFIT kit.............................................. 355 Traction grade........................................ 381 Tread wear grade................................... 381 Unusual handling characteristics............ 370 Wi-Fi Setting up a hotspot............................... 305 Window curtain air bag................................... 48 Windows Care...................................................... 348 De-icing................................................. 160 Defrosting.............................................. 162 Opening/closing...................................... 93 Windshield De-icing................................................. 160 Defrosting...................................... 156, 157 Infrared reflective................................... 155 Radio waves........................................... 154 Replacing the wiper blades..................... 149 Toll system............................................. 154 Windshield heater................................ 157, 165 Windshield washer fluid................................ 405 Windshield washer system............................ 344 Windshield wiper Activating/deactivating.......................... 149 Windshield wipers Replacing the wiper blades..................... 149 Winter operation Activating/deactivating snow chain mode..................................................... 371 Snow chains.......................................... 371 Wiper blades Care...................................................... 348 Replacing (windshield)............................ 149 Wipers Windshield wiper.................................... 149 Wireless charging Mobile phone (front).............................. 133 Mobile phone (rear passenger com­partment).............................................. 134 Overview................................................ 132 Wireless vehicle components Declaration of conformity......................... 32 Workout program......................................... 112 Workshop....................................................... 34 Zero layer Calling up.............................................. 291 Function................................................ 288 Operating.............................................. 291 Overview................................................ 289